WNMG 080412 T9205 Wendeplatten - Tungaloy
Combine the T9205 wear-resistant grade with a CVD-coated carbide substrate and an 80° trigon form to achieve productive steel turning with consistent tool life; order the WNMG080412 T9205 insert directly via Metav Werkzeuge or consult our advisers for application-specific selection. WNMG080412 T9205 indexable turning insert, 80° trigon for productive steel turning — Tungaloy The WNMG080412 T9205 insert is an ISO-compliant trigon insert designed for external and internal turning in stable machining conditions; suitable for productive steel applications with a cylindrical locating hole for secure clamping CVD-coated carbide grade T9205 80° trigon geometry for stable cuts 1.2 mm corner radius for versatile profiles Double-sided chipbreaker with cylindrical hole Consistent productivity through a wear-resistant grade The insert is built from carbide with a CVD coating, presented as the T9205 grade, which is engineered for high wear resistance and productive turning of steel under stable conditions. The CVD (chemical vapour deposition) layer enhances surface hardness and adhesion compared with uncoated grades, reducing flank wear at elevated cutting speeds. For workshop managers and production planners this means longer intervals between indexings and fewer unexpected tool changes, supporting a smoother production flow and improved process reliability. Secure clamping and predictable cutting behaviour for ISO systems Designed for ISO tooling systems, the trigon form and cylindrical locating hole ensure precise seat location and repeatable clamping forces when paired with a suitable holder. Compatibility depends on insert form, free rake angle, tolerance class, fastening method, size and thickness; matching these parameters delivers consistent contact between insert and seat, which in turn stabilises cutting forces and reduces chatter. The double-sided chipbreaker provides indexable edges that aid controlled chip formation, improving surface finish and reducing the need for secondary operations. Practical advantages on the shop floor: faster cycles, less downtime With an 80° geometry and a 1.2 mm corner radius, the insert offers a balance between strength and versatility, permitting light profiling as well as robust roughing passes where rigidity allows. The 4.76 mm thickness contributes to edge support and heat dissipation during sustained cuts. Selecting the appropriate chipbreaker and using the T9205 grade for steels under stable set-ups can shorten cycle times and cut tooling costs per component by extending time between indexings. For job shops and OEM production alike, this combination supports repeatable part quality and predictable tool behaviour. For expert advice on integrating Tungaloy inserts into existing tool chains, contact Metav Werkzeuge for availability and tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785720 Manufacturer SKU: TUN6785720 Metav SKU: 6785720-Tungaloy Designation: WNMG080412 T9205 Facts Corner radius: 1.2 mm Thickness: 4.76 mm Included angle: 80° ISO code: 080412 Size: 08 Special features CVD-coated carbide grade T9205 Trigon insert form Double-sided chipbreaker Cylindrical locating hole Free rake angle: 0° Application: Turning (external and internal) Model series: ISO turning indexable inserts FAQ What materials is this grade intended for? The T9205 grade is formulated for productive turning of steel and is specified for the WNMG080412 T9205 insert when stable cutting conditions are maintained. How does the cylindrical hole affect clamping? The cylindrical locating hole on the WNMG080412 insert centralises the seat interaction and improves repeatability of clamping, helping to maintain consistent cutting geometry during indexation. Can the insert be re-indexed or are the edges single-use? The double-sided chipbreaker design allows for indexation of alternate cutting edges, extending effective tool life before disposal or reconditioning of the insert. Which parameters determine holder compatibility? Compatibility is determined by insert form, free rake angle, tolerance class, fastening method, size and thickness; these factors should be checked against the chosen ISO holder for reliable performance. What machining benefits does the T9205 coating provide? The CVD coating in grade T9205 increases surface hardness and wear resistance, enabling higher cutting speeds and improved edge life in steel turning applications Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9205 Wendeplatten - Tungaloy
Take advantage of the T9205 CVD-coated carbide, the TSF chipbreaker and the 1.2 mm corner radius for a balance of tool life and surface finish in productive steel turning; order the WNMG080412-TSF T9205 directly via Metav Werkzeuge or consult the technical advisers for application-specific support. WNMG 080412 T9205 – ISO turning insert for stable steel turning by Tungaloy WNMG080412-TSF T9205 is an ISO-format indexable insert designed for productive external and internal turning of steel components, offering a combination of wear resistance and reliable chip control. CVD-coated carbide grade T9205 TSF chipbreaker for steady chip control 80° geometry with 1.2 mm corner radius Cylindrical hole; ISO-compatible form Consistent productivity through wear-resistant grade and geometry The insert combines a CVD-coated carbide grade (T9205) with a sturdy trigon plate geometry, delivering predictable wear behaviour during medium- to high‑speed turning of steel. The 1.2 mm corner radius helps maintain part surface integrity and reduces the tendency for chatter on medium‑duty passes, while the 80° included angle provides robust edge support for interrupted cuts. This technical combination translates into longer intervals between index changes and fewer unplanned tool swaps, supporting a steady production flow. Precise fit and straightforward integration into ISO tool systems Designed to ISO dimensions, the indexable plate ensures compatibility with standard holders when matched by form, relief angle, tolerance class, clamping and thickness. The cylindrical hole and defined 4.76 mm plate thickness assist in repeatable clamping and consistent seating, reducing adjustment time when exchanging inserts. Information on holder selection and tolerance matching is essential for achieving the stated performance; the insert’s dimensional conformity simplifies toolroom logistics and inventory management. Controlled chip evacuation for safer, cleaner turning The TSF chipbreaker has been engineered for steel turning under stable conditions and higher cutting speeds, producing short, controllable chips that evacuate reliably on most turning operations. This improves machining safety and reduces the need for manual chip clearing, while contributing to improved surface quality. The 0° rake angle offers predictable cutting forces, aiding machinists in setting feeds and speeds for consistent cycle times. Operational benefits and application guidance for shop floors The insert is intended for both external and internal turning tasks where productivity and repeatable results are required. The ISO-format trigon insert is best used with holders that match the plate form and clamp system; typical setups include an ISO turning holder, a support shim or clamp set, and replacement screws. Selecting the appropriate grade and chipbreaker according to workpiece material and rigidity ensures optimal performance and tool life, reducing downtime and improving process reliability. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and integration advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 6785650-Tungaloy Manufacturer SKU: TUN6785650 Article number: 6785650 Article name: WNMG080412-TSF T9205 Model series: ISO turning indexable inserts Measurements & angles Corner radius: 1.2 mm Plate thickness: 4.76 mm Included angle: 80° Rake angle: 0° Plate size: 08 Material & special features Grade: T9205 (CVD-coated carbide) Chipbreaker: TSF Plate form: trigon (triangular) Hole: cylindrical hole (with hole) Typical use: external and internal turning of steel Compatibility: ISO format; fit determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert optimised for? The WNMG080412-TSF T9205 insert is optimised for productive turning of steel, using the T9205 CVD-coated carbide to provide wear resistance at higher cutting speeds. How does the TSF chipbreaker affect machining? The TSF chipbreaker produces short, controlled chips in steel turning, improving evacuation and reducing manual intervention during machining with the WNMG080412-TSF T9205. Which holder features are required for correct compatibility? Compatibility depends on holder form, relief (free) angle, tolerance class, clamping type, plate size and thickness; the ISO-format of this insert simplifies selection with standard holders. Can the insert handle interrupted cuts or heavy cuts? The 80° geometry and 1.2 mm corner radius provide robust edge support for interrupted and medium heavy cuts, though application-specific testing is recommended for extreme interruption. What are the key dimensions to check when replacing inserts? Check the plate size (08), thickness 4.76 mm, corner radius 1.2 mm, hole style (cylindrical) and ISO designation (WNMG080412‑TSF) when replacing inserts to ensure fit and performance. Hersteller: Tungaloy-NTK Germany GmbH; Katzbergstraße 3a; 40764 Langenfeld
WNMG 080412 T9205 Wendeplatten - Tungaloy
High wear resistance and stable chip control from a CVD-coated T9205 grade make this insert ideal for productive steel turning; its NM chipbreaker and robust geometry support higher cutting speeds and long tool life. Order the WNMG080412-NM T9205 directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080412 T9205 — ISO turning insert for turning by Tungaloy WNMG080412-NM T9205 is a CVD-coated carbide insert engineered for productive external and internal turning of steel in stable setups CVD-coated cemented carbide T9205 Designed for productive steel turning ISO WNMG 080412 NM geometry 80° trigon shape with cylindrical hole High-performance grade for productive steel turning The CVD-coated T9205 grade combines wear resistance and thermal stability to extend tool life under elevated cutting speeds. As a cemented carbide solution, it resists flank wear and maintains edge stability, which reduces unplanned tool changes and supports continuous production. The result is a measurable improvement in process reliability and a better cost-benefit ratio when machining medium to high-strength steel. Simple system compatibility reduces setup uncertainty Compatibility is determined by form, relief angle, tolerance class, mounting, size and thickness, so the ISO WNMG 080412 format integrates cleanly into standard tooling systems. The insert has a cylindrical hole for secure clamping and is intended to be used with a matching external holder or boring bar together with the appropriate backing plate and clamping set. This system approach enables predictable repeatability and simplifies inventory management for ISO-based tooling. Robust geometry for stable cuts and surface quality The NM chipbreaker is optimised for stable turning of steel and contributes to controlled chip formation in rigid set-ups. The geometry features a 0° rake angle and a 1.2 mm corner radius, balancing edge strength with achievable surface finish. With a plate thickness of 4.76 mm and an 80° trigon shape, the insert offers high rigidity for interrupted cuts and heavy cross sections, while maintaining good accessibility in shoulder and profile operations. Consistent results and practical handling on the shop floor Manufactured by Tungaloy to ISO dimensions, this insert provides repeatable performance across batches, supporting steady production planning. The standardised shape and mounting reduce changeover time, and the grade selection minimises the need for frequent retooling. If additional technical data is required or if there is any uncertainty about application parameters, Metav Werkzeuge provides technical advice and application support by email or telephone to help match grade and chipbreaker to individual machining conditions. Contact Metav Werkzeuge for availability and tailored tooling advice on the Tungaloy T9205 grade; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6785718 SKU: 6785718-Tungaloy Manufacturer SKU: TUN6785718 Label: WNMG080412-NM T9205 Model series: ISO turning inserts Material: cemented carbide Facts Corner radius: 1.2 mm Thickness: 4.76 mm Insert angle: 80° Rake angle: 0° Plate size: 08 Special features Coating: CVD, grade T9205 Chipbreaker: NM Shape: trigon Hole style: cylindrical hole Application: Turning (external and internal) Suited for productive machining of steel under stable conditions FAQ What materials is this insert suitable for? The WNMG080412-NM T9205 is designed primarily for productive turning of steel and performs best in stable machining conditions where higher cutting speeds are used. What does the NM chipbreaker provide? The NM chipbreaker on the WNMG080412-NM promotes stable chip control and consistent chip segmentation when turning steel, helping to protect the cutting edge and maintain surface quality. Which holders are compatible with this insert? Compatibility depends on form, relief angle, tolerance class, mounting, size and thickness; the ISO WNMG 080412 format fits all matching ISO WNMG holders and appropriate clamping sets with a cylindrical hole design. How do the geometric values affect cutting performance? The 0° rake angle and 1.2 mm corner radius increase edge strength for heavier cuts, while the 80° trigon shape and 4.76 mm thickness improve rigidity and stability for interrupted or shoulder turning. How can batch and traceability be identified? Identification is straightforward using the manufacturer article number 6785718 and the SKU 6785718-Tungaloy, which correspond to the WNMG080412-NM T9205 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9205 Wendeplatten - Tungaloy
Take advantage of CVD-coated cemented carbide for extended tool life and the 1.2 mm corner radius for robust edge strength; this combination supports productive turning of Stahl at elevated speeds. Order directly via Metav Werkzeuge or consult our application specialists for matching holders and clamping sets. WNMG 080412 T9205 — ISO turning insert WNMG080412-TH for Turning, CVD-coated carbide by Tungaloy WNMG 080412 T9205 is an ISO‑standard indexable insert designed for general-purpose external and internal turning, offering a wear-resistant grade for stable machining at higher cutting speeds. CVD-coated carbide grade T9205 for Stahl machining Trigon WNMG geometry with 80° cutting angle 1.2 mm corner radius for robust chip control ISO compatibility with cylindrical-hole clamping Productive turning with high wear resistance The CVD-coated cemented carbide grade T9205 combines wear resistance with thermal stability to maintain edge integrity during continuous cuts. This results in longer tool life under stable machining conditions, reducing downtime for insert changes and contributing to a more predictable production rhythm. The coating supports elevated cutting speeds without rapid flank wear, which translates into measurable cycle‑time improvements in medium- to high‑volume turning operations. Optimised geometry for consistent chip control A trigon‑shaped insert with an 80° main cutting angle delivers a balance between cutting strength and access in shoulder and contour work. The integrated chipbreaker TH promotes controlled chip formation and evacuation, while the 1.2 mm corner radius increases the insert’s resistance to edge chipping. The cylindrical hole and standard fastening ensure secure clamping in compatible toolholders, providing repeatable seating and minimal runout in demanding turning tasks. ISO compatibility that simplifies tool management As an ISO‑normed insert, the component fits common external holders and boring bars when matching the form, clearance angle, tolerance class, fastening method, size and thickness. Standardised dimensions reduce the need for special inventory items and streamline changeovers: a matching seat, shim or clamp set and replacement screws complete the system. Clear specification of geometry and grade aids in reproducible setup and quality control across multiple machines. Practical application advice for reliable productivity This insert is recommended for external and internal turning of Stahl where rigidity is sufficient and higher cutting speeds are desirable. Selecting the correct chipbreaker TH and the T9205 grade helps to manage built-up edge and maintain surface finish. For mixed or unstable setups, consider a different geometry or a more toughness‑oriented grade to avoid premature edge failure. For bespoke recommendations or feed‑speed pairing, our technical team can advise on the appropriate holder and clamping components to match machining strategy. Discuss application details and request a tailored recommendation from Metav Werkzeuge to ensure optimal holder and insert pairing for each turning task. Technical data Article number: 6785721 Manufacturer SKU: TUN6785721 SKU: 6785721-Tungaloy Name: WNMG080412-TH T9205 Brand: Tungaloy Facts Plate size: 08 ISO designation: 080412 Thickness: 4.76 mm Cutting angle: 80° Clearance angle: 0° Corner radius: 1.2 mm Special features Trigon plate form Cylindrical‑hole fastening Chipbreaker: TH Coating/grade: T9205 (CVD‑coated) Material: cemented carbide Application: Turning of Stahl FAQ What applications is this insert best suited for? This insert, WNMG080412-TH T9205 by Tungaloy, is optimised for external and internal turning of Stahl under stable conditions and at higher cutting speeds. How does the T9205 grade affect tool life? The T9205 CVD coating on cemented carbide improves wear resistance and thermal stability, which extends the usable life of the insert in continuous turning operations. Which chipbreaker is integrated and why does it matter? The chipbreaker TH promotes controlled chip formation for safer evacuation and improved surface quality when machining Stahl with adequate rigidity. Is this insert compatible with standard ISO holders? Yes; the ISO‑normed designation and dimensions ensure compatibility with holders and boring bars that match the plate form, size, thickness and fastening method for WNMG inserts. What support is available for selecting the matching holder or clamp set? Technical recommendations for holder selection, shim usage and clamping hardware can be provided based on the specific machining setup and stability requirements for the WNMG080412-TH T9205 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9205 Wendeplatten - Tungaloy
Take advantage of a wear-resistant CVD-coated carbide T9205 and the standardised ISO geometry for reliable, productive turning operations; the combination of stable chip control and secure mounting supports consistent surface quality and tool life. Order the inserts via Metav Werkzeuge or consult our technical team for application-specific recommendations. WNMG 080412 T9205 — ISO turning insert for productive steel turning by Tungaloy The WNMG080412-DM T9205 is a trigon-shaped ISO turning insert designed for productive external and internal turning of steel under stable cutting conditions, combining a wear-resistant coating with an optimised chipbreaker for improved process security. CVD-coated carbide grade T9205 Productive turning of steel ISO WNMG080412 trigon Cylindrical hole for secure mounting High wear resistance for sustained productivity The T9205 grade features a CVD coating on a carbide substrate that is engineered for wear resistance at elevated cutting speeds. This coating reduces flank and crater wear, extending the service life of the cutting edge and lowering tooling costs per component. In practice, the harder surface of the coating preserves the carbide substrate during interrupted cuts and steady high-speed machining, which makes the insert particularly suitable where tool change intervals and machine uptime are critical for production planning. Consistent seating and ISO compatibility for dependable results Built to ISO dimensions, the insert’s trigon geometry and standardised form ensure compatibility with many clamping systems when the holder matches form, relief angle, tolerance class, fastening and thickness. The geometry provides three indexable cutting edges per insert, enabling quick index changes and predictable repeatability. With an included relief angle of 0° and an 80° main cutting edge orientation, the design supports stable cutting forces and predictable engagement behaviour, improving process repeatability and surface finish consistency. Improved chip control and secure clamping for surface quality The DM chipbreaker was developed to deliver controlled chip formation when machining steel under stable conditions, reducing the risk of tangling and promoting safe evacuation of swarf. A cylindrical hole with matching fastening ensures firm seating and minimises micro-movements that can degrade finish or accelerate edge wear. The insert’s 1.2 mm corner radius and the 4.76 mm thickness contribute to edge robustness, allowing modest increases in feed and contributing to an improved balance between productivity and component quality. Practical selection advice and application benefits Select the chipbreaker and grade according to workpiece material, machining type and system rigidity: choose T9205 for steel when process stability and higher cutting speeds are priorities. For operations with less rigidity or interrupted cuts, consider alternative grades or reduced feeds to preserve tool life. Metav Werkzeuge’s technical team can assist with selecting the right chipbreaker and clamping combination to match specific machining centres or turning holders, helping to reduce trial time and increase first‑pass yield. For application guidance or to order Tungaloy WNMG080412-DM T9205 inserts, contact Metav Werkzeuge for tailored technical support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical specification Article name: WNMG080412-DM T9205 Core data Corner radius: 1.2 mm Relief angle: 0° Plate thickness: 4.76 mm Insert size: 08 Main cutting angle: 80° Design and features CVD-coated carbide (T9205) Trigon plate form DM chipbreaker Cylindrical hole for fastening ISO turning inserts series Intended use: turning steel System components: insert, holder, clamp set, replacement screws FAQ Is this insert suitable for external and internal turning? Yes. The WNMG080412-DM T9205 insert is designed for both external and internal turning applications, providing reliable edge life when matched with the correct holder and cutting parameters. What materials is the T9205 grade best for? The T9205 CVD-coated carbide grade is optimised for productive machining of steel under stable cutting conditions and at higher cutting speeds. How does the DM chipbreaker affect machining? The DM chipbreaker promotes controlled chip formation on steel, improving chip evacuation and surface finish while reducing the risk of chip entanglement. Which SKU identifies this item for ordering? This item is listed as SKU 6785760-Tungaloy and the manufacturer SKU TUN6785760 for precise ordering and inventory management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, an 80° trigon form and ISO compatibility for reliable, productive turning operations; order directly via Metav Werkzeuge or consult our experts for application-specific advice. WNMG080412 T9205 — ISO turning insert for productive steel turning, trigon form, Tungaloy The WNMG080412 T9205 is an ISO-standard trigon indexable insert engineered for external and internal turning, offering a CVD-coated carbide substrate and a double-sided chipbreaker for stable, high-speed machining of steel. CVD-coated carbide grade T9205 Optimised for productive steel turning Trigon WNMG shape, 80° included angle Double-sided insert with cylindrical hole Consistent chip control and enhanced wear resistance for higher productivity The CVD-coated carbide grade T9205 delivers improved wear resistance under stable cutting conditions, allowing longer intervals between indexings and fewer tool changes. The CVD coating forms a hard, wear-resistant layer that reduces flank and crater wear at elevated cutting speeds; this is particularly beneficial when machining steel where heat and abrasion are significant. The double-sided chipbreaker geometry supports predictable chip formation and evacuation, which reduces cycle-time variability and contributes directly to a smoother production flow. Technical terms explained: CVD (chemical vapour deposition) describes a coating process that deposits a thin, hard layer onto the carbide substrate to extend life and maintain edge integrity. Precise ISO compatibility and straightforward clamping considerations Compatibility with toolholders is governed by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the WNMG trigon form and 80° included angle determine seat geometry and cutting orientation. The insert is supplied with a cylindrical hole to match standard clamp systems and an insert thickness of 4.76 mm, ensuring secure locating and repeatable positioning. When selecting a holder, match the seat profile and fastening to the insert’s dimensions to preserve concentricity and rigidity. Clearances such as the 0° relief angle indicate the tool–workpiece contact geometry and influence cutting forces and surface finish. Application scope and recommended use for consistent results Designed primarily for turning of steel under stable conditions, this insert performs well at higher cutting speeds where its CVD-coated carbide substrate resists thermal and abrasive wear. Typical uses include both external and internal turning tasks where dimensional stability and surface quality are priorities. The trigon form provides robust corner support, and the 1.2 mm corner radius smooths transition lines while balancing edge strength and surface finish. For less stable setups or mixed-material batches, select a matching chipbreaker and consider lower cutting parameters to preserve tool life; the insert’s double-sided nature supports economical indexability and straightforward edge rotation when renewal is required. For tailored recommendations on integrating Tungaloy turning inserts into current toolholders and for prompt supply, contact Metav Werkzeuge via e‑mail at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists provide application-focused advice and rapid delivery options. Technical data Article number: 6785675 Manufacturer article number / SKU: TUN6785675 Supplier SKU: 6785675-Tungaloy Model series: ISO turning indexable inserts Designation: WNMG080412 Grade / coating: T9205, CVD-coated Material: carbide Facts Radius (corner): 1.2 mm Thickness: 4.76 mm Included angle: 80° Relief/clearance angle: 0° Size designation: 08 Special features Trigon (WNMG) insert form Double-sided chipbreaker Cylindrical hole for clamping ISO-compatible geometry for external and internal turning Optimised for machining steel at higher cutting speeds FAQ Which machining tasks suit this insert best? The WNMG080412 T9205 insert from Tungaloy is intended for productive external and internal turning of steel under stable clamping conditions, where its CVD-coated carbide construction supports sustained performance. What advantages does the T9205 grade provide? T9205 is a CVD-coated carbide grade engineered for wear resistance and thermal stability; the coating and substrate combination help maintain a consistent cutting edge during higher-speed steel turning with the Tungaloy WNMG insert (SKU TUN6785675). Is this insert indexable and how is it oriented in the holder? The insert is double-sided and indexable; rotation of the insert presents a fresh cutting edge. Orientation and clamping follow ISO WNMG seat geometry and the cylindrical hole matches standard clamping systems. How can compatibility with existing toolholders be verified? Compatibility is determined by form, relief/clearance angle, tolerance class, fastening type, size and thickness; check the holder’s seat profile and clamp design against the insert’s WNMG080412 dimensions and the 4.76 mm thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for strong wear resistance and the 1.2 mm corner radius for reliable edge strength to keep turning operations productive and consistent; order via Metav Werkzeuge or consult the technical team for application support. WNMG080412-PM T9215 indexable turning insert by Tungaloy — CVD-coated carbide, trigon form, 1.2 mm corner radius The WNMG080412-PM T9215 is an ISO-standard indexable turning insert engineered for medium steel turning, offering a balance of wear resistance and breakage safety for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Trigon form with 1.2 mm corner radius Compatible with ISO turning holders Cylindrical-hole design for secure clamping Productive turning for medium steels with consistent edge life This insert is designed around a CVD-coated carbide matrix, grade T9215, which combines high wear resistance with good fracture toughness. The result is an insert optimised for continuous and lightly interrupted cuts, enabling longer tool life and fewer index changes. For production environments where cycle time and repeatability matter, the coating and carbide blend reduce flank wear, which keeps tolerances stable and machining windows predictable. Compatibility with ISO-standard toolholders simplifies stockkeeping and replacement in high-throughput shops. Improved chip control and stable cutting performance The PM chipbreaker geometry supports effective chip formation across typical steel machining conditions, reducing the likelihood of tangling and improving surface finish. The trigon geometry contributes to a robust cutting edge while allowing multiple index positions per insert for economical usage. Together these characteristics enhance process stability and help maintain consistent component quality during longer runs, which supports predictable production planning and lower unplanned downtime. Ease of integration into existing ISO tool systems As an ISO-format insert, the item fits into common external and internal turning holders when matched by form, free angle, tolerance class, fastening method, size and thickness. The cylindrical locating hole ensures positive positioning and secure clamping, so changeovers remain quick and repeatable. This reduces setup time and the need for special tooling inventories, enabling smoother workflow and simpler tool management in mixed-machine environments. Practical geometry for precision and durability The 80° lead angle and 1.2 mm corner radius offer a compromise between strength and surface finish: the radius absorbs shock and resists chipping, while the insert geometry still permits fine surface control when cutting steel. With a plate thickness of 4.76 mm, the insert provides a stable support platform in the pocket, lowering vibration and contributing to longer cutting-edge life. These design choices translate into fewer interruptions and a steadier quality output across serial production. For high-productivity steel turning applications, rely on Tungaloy inserts supplied through Metav Werkzeuge — contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6796104-Tungaloy (SKU 6796104-Tungaloy) Manufacturer article number: 6796104 Model series: ISO turning indexable inserts Material: Cemented carbide Grade: T9215 Facts ISO designation: 080412 Insert designation: WNMG080412-PM Corner radius: 1.2 mm Plate thickness: 4.76 mm Lead angle: 80° Clearance angle: 0° Special features CVD-coated carbide PM chipbreaker Trigon insert form Cylindrical locating hole For external and internal turning in steel FAQ What materials is this insert suited for? The WNMG080412-PM T9215 insert is optimised for medium steel machining, delivering a balance of wear resistance and fracture toughness suitable for continuous to lightly interrupted cuts. How does the PM chipbreaker affect machining? The PM chipbreaker promotes controlled chip formation and evacuation during steel turning, improving surface finish and reducing the risk of chip-related interruptions with the Tungaloy trigon insert. Will this insert fit my ISO turning holder? Compatibility is determined by matching the ISO form, tolerance class, fastening method, size and thickness; the WNMG080412-PM design uses a cylindrical locating hole for secure and repeatable clamping. What benefits does the 1.2 mm corner radius provide? A 1.2 mm radius increases edge strength and resistance to chipping, which extends effective tool life and improves stability in batch production where minor interruptions or variations can occur. Can the insert be used for interrupted cuts? Yes. The CVD-coated carbide grade T9215 is intended for continuous to lightly interrupted cutting conditions and offers reliable performance under those regimes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a robust 1.2 mm corner radius and ISO-compatible geometry for steady, high-output turning in steel; order the WNMG080412-TA T9215 directly via Metav Werkzeuge or consult our technical advisers for selection and delivery. WNMG080412-TA T9215 ISO turning insert (WNMG 080412) for turning — Tungaloy The WNMG080412-TA T9215 is an ISO-standard indexable insert for external and internal turning, engineered for medium steel machining with a CVD-coated cemented carbide grade and a 1.2 mm corner radius. CVD-coated carbide for medium steel Trigon shape with 80° cutting angle 1.2 mm corner radius for robust edges Compatible with ISO turning toolholders High wear resistance and process stability for steel turning The CVD-coated cemented carbide of grade T9215 combines elevated wear resistance with fracture toughness, making it well suited to continuous and light interrupted cuts in medium steels. The coating reduces flank wear and improves edge life under sustained cutting, which translates into fewer insert changes and higher net machining time. The 1.2 mm corner radius strengthens the cutting edge, reducing the risk of chipping and supporting stable tool life when moderate radial depths and feeds are used. Precise fit and secure clamping reduce vibration and improve surface finish Designed as an ISO indexable insert in a trigon form with an 80° main cutting angle and a cylindrical hole, the geometry ensures repeatable seating and secure clamping in standard holders. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; when mounted correctly, the insert promotes consistent chip flow and a superior surface quality. The standardised format also simplifies toolroom logistics and fast changeovers on production lines. Practical selection and application guidance for reliable productivity The integrated chipbreaker TA is optimised for chip control in typical steel operations and should be selected according to workpiece material, stability and machining type. For many applications, pairing this insert with a solid external holder and an appropriate shim/clamp set yields predictable results and longer tool life, boosting overall productivity. Where interrupted cuts or poor rigidity occur, reduce uncut chip thickness or choose a more robust holder to preserve edge integrity; the insert’s design supports such pragmatic adjustments without compromising performance. For high-productivity steel turning with the Tungaloy WNMG080412-TA T9215, contact Metav Werkzeuge for ordering and tailored advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery. Technical data Article number: 6775280 Manufacturer article number: 6775280 Manufacturer SKU: TUN6775280 SKU: 6775280-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Core specifications Corner radius: 1.2 mm Plate thickness: 4.76 mm Insert size: 08 ISO code: 080412 Cutting angle: 80° Materials & features Material: CVD-coated cemented carbide (grade T9215) Chipbreaker: TA Plate form: trigon Hole: with cylindrical hole Relief angle: 0° Recommended application: turning (external and internal), medium steel System components: ISO insert, compatible holder, shim/clamp set, replacement screw FAQ What materials is this insert best suited for? The WNMG080412-TA T9215 from Tungaloy is optimised for medium steel machining, offering a balance of wear resistance and toughness for productive turning operations. Which toolholders are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness; the WNMG format fits standard ISO turning holders designed for trigon inserts. What benefits does the CVD coating provide? The CVD-coated cemented carbide in this grade reduces flank wear and improves edge life, resulting in more consistent cutting performance and extended tool life under continuous and lightly interrupted cuts. When should the chipbreaker TA be chosen? The chipbreaker TA is suitable for general steel turning where reliable chip control and predictable behaviour are required; select TA when workpiece material, machining stability and cutting mode align with medium steel conditions. Can this insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when mounted in a compatible holder that provides adequate support and rigidity for the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
High wear resistance and improved fracture toughness from the CVD-coated grade deliver extended tool life and steady productivity for medium steel turning. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored advice and availability. WNMG 080412 T9215 — Turning insert, ISO trigon, Tungaloy The WNMG080412 T9215 is an ISO-standard trigon insert designed for external and internal turning in medium steel, combining a robust geometry with a CVD-coated carbide grade for high-volume and semi-continuous operations. CVD-coated carbide for medium steel Trigon form WNMG, stable 80° geometry 1.2 mm corner radius for robust edge Double-sided chipbreaker, cylindrical hole Increased productivity through a balanced carbide grade The CVD-coated carbide T9215 is specified for medium steel machining and offers a balance between wear resistance and fracture toughness, which translates into longer tool life under continuous to light interrupted cuts. This balance supports higher material removal rates and reduces the frequency of tool changes, so throughput improves while unplanned downtime falls. For production environments, the combination of a wear-resistant coating and a mechanically robust substrate means reliable surface finish and consistent component dimensions across longer tool runs. Geometry and clamping deliver consistent cutting performance A stable trigon geometry with an 80° approach angle and a 0° relief ensures predictable cutting forces and good workpiece support at the insert corner. The 1.2 mm corner radius contributes to a robust cutting edge for heavier passes, while the cylindrical hole and standard thickness simplify secure clamping and accurate location in compatible holders. These features together minimise vibration and improve repeatability, making the insert well suited to demanding turning tasks where process stability and part quality are essential. Chip control and application advice for reliable results The double-sided chipbreaker improves chip evacuation and helps maintain cutting stability across a range of feeds and depths, easing swarf management in both external and internal turning. Select the chipbreaker and grade combination according to workpiece material and the expected level of interruption: the CVD-coated grade is ideal for steady steel cutting but also tolerates slight interruptions thanks to its toughness. Ensure the chosen holder matches form, free angle, tolerance class, fastening method, size and thickness for safe, repeatable use and optimal chip control. For high-productivity turning with Tungaloy’s CVD-coated grade T9215, contact Metav Werkzeuge for availability and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772384 SKU: 6772384-Tungaloy Manufacturer SKU: TUN6772384 Model series: ISO turning inserts Core dimensions Size (ISO code): 080412 Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Approach angle: 80° Design & features Shape: trigon Hole: with cylindrical hole Carbide: CVD-coated carbide Chipbreaker: double-sided Application: turning Recommended for: medium steel, continuous to light interrupted cuts FAQ What materials is this insert best suited for? The WNMG080412 T9215 insert from Tungaloy (SKU 6772384-Tungaloy) is optimised for medium steel and delivers reliable wear resistance and toughness in such applications. How is compatibility with a toolholder determined? Compatibility depends on form, free angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and correct positioning of the insert. Can this grade cope with interrupted cuts? Yes, the CVD-coated T9215 grade is designed for continuous to light interrupted cuts, offering a good compromise between wear resistance and fracture toughness. What does the double-sided chipbreaker provide? The double-sided chipbreaker improves chip control and evacuation, supporting stable cutting conditions and easier swarf handling in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
WNMG 080412 T9215 ISO-Drehwendeschneidplatte für Drehen — Tungaloy Die WNMG080412-TM T9215 ist eine ISO-genormte Wendeschneidplatte für effizientes Außen- und Innendrehen in der Stahlbearbeitung und verbindet hohen Verschleißwiderstand mit zuverlässiger Bruchsicherheit. Hohe Standzeit durch CVD-Beschichtung Speziell für mittlere Stahlbearbeitung Trigonform mit 80° für stabile Schneide Zylindrisches Loch für sichere Befestigung Eckenradius 1,2 mm für präzise Konturen Zuverlässige Schneidstoffkombination für Serienfertigung Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9215 bietet ausgewogene Härte und Zähigkeit. Dadurch ergibt sich ein hoher Verschleißwiderstand bei gleichzeitig verbesserter Bruchsicherheit, was besonders in Serienfertigung und bei kontinuierlichen Schnitten die Werkzeugstandzeit erhöht. Anwender profitieren von geringeren Rüstzeiten und konstanteren Ergebnisse bei der Stahlbearbeitung. Präzise Formgebung und Befestigung für stabile Prozesse Die trigonförmige Platte mit 80° Spitzenwinkel und Eckenradius 1,2 mm ermöglicht definierte Schnittgeometrien und reproduzierbare Kantengestaltung. Das zylindrische Loch gewährleistet eine sichere und zentrisch genaue Befestigung auf standardisierten ISO-Haltern. Weil die Platte ISO-genormt ist, bleibt die Auswahl des passenden Halters entscheidend für Prozessstabilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke müssen übereinstimmen. Vielseitiger Einsatz und Auswahl des Spanbrechers Der Spanbrecher TM ist für mittlere Schnittbedingungen ausgelegt und eignet sich sowohl für kontinuierliche als auch leicht unterbrochene Schnitte. Durch die passende Kombination aus Spanbrecher und Sorte lassen sich Spanform und Oberflächengüte gezielt beeinflussen. Bei wechselnden Werkstoffchargen empfiehlt sich eine kurze Prozessoptimierung, da die T9215 besonders bei mittleren Stählen ihre Vorteile ausspielt. Zieleinsatzgruppe und wirtschaftlicher Nutzen Die Wendeschneidplatte richtet sich an Fertiger und Lohnbearbeiter, die produktiv und zuverlässig Stahlkomponenten drehen. Durch die längere Standzeit und die stabile Spanbildung sinken Ausfallzeiten und Werkzeugkosten pro Werkstück. Insbesondere bei hohen Stückzahlen zahlt sich die Kombination aus Tungaloy-Qualität und der Sorte T9215 schnell wirtschaftlich aus. Empfehlung: Für produktive Stahlbearbeitung die WNMG080412-TM T9215 von Tungaloy über Metav Werkzeuge anfragen — Kontakt: info@metav-werkzeuge.com | +49 2822 7131930 Technische Daten Artikelnummer: 6772401 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-TM T9215 Hersteller-SKU: TUN6772401 SKU: 6772401-Tungaloy Fakten Eckenradius: 1,2 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 Spanbrecher: TM (für mittlere Schnitte) Plattenform: Trigon Loch: zylindrisches Loch Einsatz: Außen- und Innendrehen Norm: ISO-genormt Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Für welche Werkstoffe eignet sich die Platte am besten? Die WNMG080412-TM T9215 von Tungaloy ist erste Wahl für die mittlere Stahlbearbeitung und bietet dort ein ausgewogenes Verhältnis aus Verschleißwiderstand und Bruchsicherheit. Was bedeutet die Sorte T9215 konkret? T9215 beschreibt eine CVD-beschichtete Hartmetallsorte von Tungaloy, die hohe Standzeit und gute Kantensicherheit bei produktivem Drehen gewährleistet. Ist der Spanbrecher TM für unterbrochene Schnitte geeignet? Der Spanbrecher TM ist primär für kontinuierliche bis leicht unterbrochene Schnitte ausgelegt und sorgt für stabile Spanbildung und gleichmäßige Oberflächen. Passt die Platte in jeden ISO-Halter? Die Platte ist ISO-genormt, die Kompatibilität hängt jedoch von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Ein Abgleich der Parameter ist empfohlen. Welchen Vorteil bietet die CVD-Beschichtung? Die CVD-Beschichtung erhöht den Verschleißwiderstand und verbessert die thermische Stabilität der Schneide, was längere Standzeiten und konstante Bearbeitungsergebnisse ermöglicht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9215 Wendeplatten - Tungaloy
WNMG 080412 T9215 Drehwendeschneidplatte für Drehen von Tungaloy Die WNMG 080412 T9215 Wendeplatte ist für die mittlere Stahlbearbeitung konzipiert und bietet eine robuste Kombination aus Verschleißwiderstand und Zähigkeit für produktive Außen- und Innendrehprozesse. Trigonform mit 80° Keilwinkel CVD-beschichtetes Hartmetall T9215 Doppelseitiger Spanbrecher für produktive Schnitte Zylindrisches Loch für sicheren Sitz Eckenradius 1,2 mm für stabile Schneidkante Hohe Standzeit bei Serienfertigung und stabiler Schnitt Die Wendeplatte verbindet CVD-beschichtetes Hartmetall mit einer Sorte, die speziell für die mittlere Stahlbearbeitung ausgelegt ist. Die Beschichtung erhöht den Verschleißwiderstand und reduziert thermischen Abrieb, wodurch sich die Standzeit bei kontinuierlicher Fertigung verlängert. Anwender profitieren von geringeren Werkzeugwechseln und konstanteren Prozesszeiten, was die Produktivität in der Serienfertigung direkt steigert. Präzise Schnittkontrolle für bessere Oberflächengüte Die trigonale Plattenform mit einem Keilwinkel von 80° und dem Eckenradius von 1,2 mm sorgt für eine ausgewogene Kombination aus Schneidkante und Stabilität. Durch den Freiwinkel von 0° bleibt die Kontaktfläche groß, was Vibrationen reduziert und zu einer verbesserten Oberflächengüte führt. Für Anwender, die qualitativ hochwertige Bauteile aus Stahl fertigen, bedeutet das weniger Nacharbeit und reproduzierbare Ergebnisse. Vielseitiger Systemeinsatz und einfache Montage Die WNMG-Ausführung ist ISO-genormt und kompatibel mit gängigen Außenhaltern und Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke die Passform bestimmen. Das zylindrische Loch ermöglicht eine form- und kraftschlüssige Befestigung, während die doppelseitige Ausführung zwei Schneidkanten bietet und damit die Wirtschaftlichkeit erhöht. Der modulare Systemaufbau vereinfacht Lagerhaltung und Ersatzteilmanagement. Empfohlene Anwendung und Zielgruppe Die Sorte T9215 eignet sich besonders für Betriebe, die eine zuverlässige Lösung für mittlere Stahlbearbeitung suchen, inklusive kontinuierlicher und leicht unterbrochener Schnitte. Empfohlen für Produktionshallen, Lohnfertiger und Werkzeugmaschinenbetreiber, die Wert auf konstante Prozesssicherheit und lange Werkzeugstandzeiten legen. Bei Unsicherheit über die optimale Spanbrecher- oder Halterwahl hilft die technische Beratung weiter. Sind Sie sich nicht sicher, ob diese Wendeplatte Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen gerne zur Verfügung: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Empfehlung: Vertrauen Sie auf die Tungaloy-Qualität der CVD-beschichteten Hartmetall-Sorte T9215 für wirtschaftliche Drehprozesse und kontaktieren Sie Metav Werkzeuge für eine individuelle Einsatzberatung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Leistungsmerkmale Artikelnummer: 6796060 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412 Hersteller SKU: TUN6796060 Daten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Winkel: 80° Freiwinkel: 0° Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: chemische Gasphasenabscheidung) Sorte: T9215 – für mittlere Stahlbearbeitung Plattenform: trigon Spanbrecher: doppelseitig Loch: zylindrisches Loch Einsatz: Außen- und Innendrehen; Spanbrecher und Sorte passend zu Werkstoff, Bearbeitungsart und Stabilität wählen FAQ Für welche Werkstoffe ist die Wendeplatte geeignet? Die WNMG 080412 T9215 von Tungaloy ist primär für mittlere Stahlbearbeitung ausgelegt; die Sorte T9215 bietet Verschleißwiderstand und Bruchsicherheit für produktive Serienprozesse (SKU TUN6796060). Ist die Wendeplatte für unterbrochene Schnitte geeignet? Ja, die Sorte T9215 ist für kontinuierliche bis leicht unterbrochene Schnitte optimiert; bei stark unterbrochenen Schnitten sollte die Prozessführung und die Halterung überprüft werden. Wie wird die Wendeplatte befestigt? Die Platte verfügt über ein zylindrisches Loch zur Schraubbefestigung; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Wie viele Schneidkanten bietet die Platte? Die trigonale Form mit doppelseitigem Spanbrecher bietet mehrere Indexierpositionen und erhöht damit die Wirtschaftlichkeit vor dem Austausch. Welche Vorteile bietet die CVD-Beschichtung? Die CVD-Beschichtung reduziert thermischen Verschleiß und verbessert die Standzeit bei der Bearbeitung von Stahl; die Sorte T9215 kombiniert das mit erhöhter Bruchsicherheit für hohe Produktivität. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T9215 and a TS chipbreaker to secure consistent chip control and long tool life in medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting data. WNMG 080412 T9215 — ISO turning insert, CVD-coated carbide, 1.2 mm radius (Tungaloy) WNMG 080412 T9215 is an ISO‑standard trigon turning insert designed for external and internal turning in medium steels, offering high wear resistance and fracture strength for productive, continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Trigon shape with 80° geometry 1.2 mm corner radius for robust edge TS chipbreaker for continuous cuts High wear resistance and reliable productivity for medium-steel turning The insert is built on a CVD-coated carbide substrate, identified by the grade T9215, which balances wear resistance with fracture toughness to maintain edge life under productive cutting conditions. This combination reduces tool change frequency and supports higher material removal rates in continuous and lightly interrupted machining. By choosing this material grade and the matching chipbreaker, machining processes become more predictable and economical, with a measurable improvement in process stability and surface quality. Geometry and clamping that reduce vibration and extend life The trigon geometry with an effective 80° angle and a 1.2 mm corner radius provides a strong cutting edge and favourable engagement for roughing and finishing passes. The insert's 0° clearance angle and cylindrical hole fixation ensure secure clamping in ISO holders, while the plate thickness 4.76 mm contributes to rigidity. These characteristics translate into lower vibration, reduced risk of edge chipping and consistent dimensional accuracy across production batches. Compatibility with the toolholder depends on form, clearance, tolerance class, fastening method, size and thickness. Shop-floor benefits: chip control, surface finish and predictable upkeep Equipped with the TS chipbreaker, the insert improves chip formation for continuous to slightly interrupted cuts, helping to avoid long, tangled chips and to facilitate evacuation. The result is an improved surface finish and fewer interruptions for manual chip handling. The robust grade and geometry reduce the incidence of unexpected breakage, supporting steady output and easier process planning. For complex setups, specialist advice is available to match holder choice and cutting parameters to the machining task. For high-productivity medium-steel turning with reliable edge life, opt for the Tungaloy WNMG080412-TS T9215 — contact Metav Werkzeuge for tailored application advice and holder compatibility at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6774112 Manufacturer SKU: TUN6774112 SKU: 6774112-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 1.2 mm Plate size: 08 ISO designation: 080412 Plate thickness: 4.76 mm Clearance angle: 0° Geometry angle: 80° Special features Grade: T9215 Chipbreaker: TS Schneidstofftyp: CVD-coated carbide Plate form: trigon Hole style: cylindrical hole (with hole) Typical application: Drehen (external and internal turning) FAQ Which materials is this insert optimised for? The WNMG080412-TS T9215 is optimised for medium steels, where the CVD-coated T9215 grade delivers a compromise of wear resistance and toughness suited to productive turning. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance, tolerance class, fastening type, size and thickness; the WNMG080412-TS geometry conforms to ISO standards and requires a matching trigon / WNMG holder. What are the key geometry specifications to consider? Key values are a 1.2 mm corner radius, 80° geometry, 0° clearance angle, 4.76 mm plate thickness and a trigon form with a cylindrical hole; these affect edge strength and clamping stability. What machining conditions suit the TS chipbreaker? The TS chipbreaker is designed for continuous and slightly interrupted cuts, promoting short, controllable chips and consistent surface quality with the T9215 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
Combining CVD-coated cemented carbide and a robust trigon geometry delivers high productivity and dependable edge life for medium steel turning; benefit from consistent chip control and a strong cutting edge. Order the WNMG080412-AM T9215 directly via Metav Werkzeuge or consult our advisers for selection and process parameters WNMG 080412 T9215 — ISO turning insert, CVD-coated cemented carbide, Tungaloy The WNMG080412-AM T9215 is an ISO turning insert designed for external and internal turning of medium steel, combining a trigon geometry with a dedicated AM chipbreaker for stable, productive machining. ISO trigon shape for secure clamping CVD-coated cemented carbide T9215 Suited to medium steel and productive turning 0° clearance and 80° approach angle Consistent productivity with a wear-resistant cutting grade The CVD-coated cemented carbide T9215 grade is engineered as a first choice for medium steel, delivering a balance between wear resistance and fracture resistance. This chemical vapour deposition layer reduces flank and crater wear under continuous to lightly interrupted cutting, which lowers tooling cost per part and keeps cycle times stable. The result is measurable improvement in throughput for turning operations, especially where uninterrupted production and predictable tool life are priorities. The combination of coating and substrate supports higher cutting speeds while maintaining reliable edge integrity. Rigid geometry for secure clamping and repeatable results A trigon insert geometry with an 80° approach angle and 0° clearance provides high edge strength and improved resistance to radial loads. The corner radius 1.2 mm enhances the insert’s robustness and contributes to a consistently better surface finish when cutting medium-diameter workpieces. With a 4.76 mm thickness, the insert offers increased rigidity in the clamping seat, and the cylindrical hole secures repeatable positioning in ISO-compatible holders. Compatibility with the chosen toolholder is governed by form, relief angle, tolerance class, fastening method, size and thickness, so selecting the correct holder ensures full benefit from the insert’s mechanical advantages. Controlled chip formation and reliable process behaviour The chipbreaker AM is tuned to manage chips in medium-steel applications, offering a trade-off between efficient chip control and strong cutting edges for productive turning. This chipformer performs well in continuous to slightly interrupted cuts, reducing the risk of built-up edge and supporting longer uninterrupted runtimes. For workshop planners and production engineers, this means fewer tool changes and more consistent part quality. For specific machining scenarios—such as varying clamping stiffness or interrupted sections—consultation is recommended to match holder rigidity, cutting parameters and coolant strategy to the insert’s capabilities. Contact Metav Werkzeuge for tailored tool selection and immediate availability of the Tungaloy WNMG080412-AM T9215; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772392 Manufacturer SKU: TUN6772392 SKU: 6772392-Tungaloy Core specifications Corner radius: 1.2 mm Plate thickness: 4.76 mm Approach angle: 80° Clearance angle: 0° Plate size: 08 Materials & features Cutting grade: T9215 Coating: CVD-coated cemented carbide Chipbreaker: AM Plate shape: trigon Hole style: cylindrical hole Application: Turning (external and internal) Compatibility: ISO turning insert; holder fit by form, relief, tolerance, fastening, size and thickness FAQ Which materials is this insert best suited for? The Tungaloy WNMG080412-AM T9215 insert is optimised for medium steel; the T9215 grade pairs wear resistance with edge strength for productive turning. What are the key geometric data for clamping and cutting? The insert features a trigon shape with an 80° approach angle, 0° clearance, corner radius 1.2 mm, and a plate thickness of 4.76 mm; it locates via a cylindrical hole for secure fastening. Can this insert be used for interrupted cuts? Yes, the chipbreaker AM and the T9215 grade are suitable for continuous to slightly interrupted cuts; heavier interruptions may require a different geometry or grade. Which toolholders are compatible with this insert? The insert conforms to ISO turning plate standards; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness to ensure correct seating and clamping. Is the insert suitable for internal as well as external turning? Yes, the plate is intended for both external and internal turning operations when used with an appropriately sized and rigid holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
WNMG080412-NM 080412 T9215 Wendeschneidplatte (Drehen) – Tungaloy WNMG080412-NM T9215 kombiniert CVD-beschichtetes Hartmetall mit einem trigonalen Plattendesign für produktives Außen- und Innendrehen in der mittleren Stahlbearbeitung CVD-beschichtetes Hartmetall T9215 erhöht Standzeit Trigonale Form für stabile Schnittleistung Eckenradius 1,2 mm für universelle Konturarbeit Plattendicke 4,76 mm sorgt für Schwingungsdämpfung Mit Loch und zylindrischem Lochbild für einfache Spannlösung Höhere Produktivität durch robusten Schneidstoff Die Wendeschneidplatte basiert auf dem Schneidstoff T9215, einem CVD-beschichteten Hartmetall, das eine gute Kombination aus Verschleißwiderstand und Bruchsicherheit bietet. Durch diese Materialwahl lässt sich die Standzeit bei kontinuierlicher oder leicht unterbrochener Schnittführung signifikant erhöhen, was die Stillstandszeiten reduziert und die Fertigungsrate stabilisiert. Für Anwender, die auf reproduzierbare Prozesse Wert legen, bedeutet das weniger Werkzeugwechsel und gleichmäßigere Serienteile. Präzision und Stabilität in anspruchsvollen Schnitten Die trigonale Plattenform und der Eckenradius 1,2 mm liefern mechanische Stabilität bei Außen- und Innendrehoperationen. Die Plattendicke von 4,76 mm trägt zur Vibrationsdämpfung bei und ermöglicht sicherere Schneidbedingungen bei wechselnden Schnittkräften. Der Freiwinkel von 0° unterstützt stabile Schnittkanten und reduziert das Risiko von Ausbrüchen, besonders bei mittleren Stahlqualitäten. Dadurch entstehen gleichmäßige Oberflächen und konstante Maßhaltigkeit. Einfache Integration und systematische Kompatibilität Die ISO‑Genorm der Platte gewährleistet die Kompatibilität zu gängigen Außenhaltern und Bohrstangen; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Passung zum Halter. Die Ausführung mit zylindrischem Loch erleichtert die Montage mit Unterlage und Klemmsatz und vereinfacht den Ersatzprozess im Produktionsumfeld. Anwender finden schnell passende Halter, was Rüstzeiten minimiert und die Prozesssicherheit erhöht. Materialanwendungen, Auswahlhinweise und Einsatzempfehlung Die Sorte T9215 ist erste Wahl für die mittlere Stahlbearbeitung; sie vereint Produktivität mit guter Spanformung. Beim Einsatz empfiehlt sich die Abstimmung von Spanbrecher (NM), Schneidwerten und Kühlstrategie auf Werkstückstabilität und Bearbeitungsart. Für Einsteiger: NM‑Spanbrecher eignet sich vielseitig für kontinuierlichen Schnitt; bei stark unterbrochenem Schnitt sind stabilere Haltersysteme und reduzierte Schnittparameter zu prüfen. So lassen sich Ausschussraten und Nacharbeit reduzieren. Empfehlung: Für produktive Drehprozesse die Tungaloy WNMG080412‑NM T9215 auswählen und bei Detailfragen unsere Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6772404 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-NM T9215 Fakten Eckenradius: 1,2 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Schneidstoff: CVD-beschichtetes Hartmetall Sorte: T9215 Spanbrecher: NM Plattenform: Trigon Loch: mit Loch (zylindrisches Loch) Anwendung: Drehen Systemaufbau: ISO-Drehplatte, Außenhalter/Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben Kompatibilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke FAQ Wie lässt sich die Kompatibilität der WNMG080412‑NM T9215 mit vorhandenen Haltern prüfen? Die Kompatibilität prüfen Sie anhand von Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke. Die WNMG080412‑NM T9215 entspricht ISO‑Normen, sodass passende Außenhalter oder Bohrstangen in den meisten Systeme verwendet werden können. Bei Unsicherheiten hilft die Angabe der Halterbezeichnung weiter. Für welche Werkstoffe ist die Sorte T9215 besonders geeignet? Die Sorte T9215 wurde für die mittlere Stahlbearbeitung optimiert. Die CVD‑Beschichtung bietet guten Verschleißwiderstand und Bruchsicherheit, wodurch die Tungaloy WNMG080412‑NM T9215 vor allem bei Stahllegierungen effiziente Ergebnisse liefert. Welche Vorteile bringt der Spanbrecher NM bei dieser Wendeschneidplatte? Der NM‑Spanbrecher sorgt für stabile Spanbildung bei kontinuierlichen Schnitten und unterstützt eine zuverlässige Spanabfuhr. In Kombination mit dem Eckenradius 1,2 mm und der Plattendicke 4,76 mm ergibt sich eine robuste Lösung für universelle Drehanwendungen. Wie beeinflusst die Plattendicke die Bearbeitungssicherheit? Die Plattendicke von 4,76 mm erhöht die Steifigkeit der Platte und trägt zur Dämpfung von Schwingungen bei. Dadurch sinkt das Risiko von Ausbrüchen an der Schneide, was zu besseren Oberflächen und geringerer Nacharbeit führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9215 Wendeplatten - Tungaloy
WNMG 080412 T9215 Drehen | Tungaloy WNMG080412 T9215 ist eine ISO-genormte Trigon-Wendeplatte für präzises Außen- und Innendrehen mit hoher Produktivität WNMG080412 Trigon-Wendeplatte, ISO-genormt CVD-beschichtetes Hartmetall, Sorte T9215 Eckenradius 1.2 mm für stabile Schnittführung Plattendicke 4,76 mm mit zylindrischem Loch Doppelseitiger Spanbrecher für hohe Produktivität Höhere Produktivität durch robuste Schneidstofftechnik Die T9215-Sorte kombiniert CVD-Beschichtung und Hartmetall, wodurch eine ausgewogene Mischung aus Verschleißwiderstand und Bruchsicherheit entsteht. Dadurch erhöht sich die Standzeit bei der Bearbeitung von mittleren Stahlwerkstoffen und die Zerspanung wird kontinuierlich produktiver. Anwender profitieren von geringeren Stillstandszeiten und konstanter Oberflächenqualität bei Serien- und Einzelfertigung. Passgenauigkeit und Stabilität im Einsatzsystem sichern hohe Prozesssicherheit Die ISO-Genormung garantiert Kompatibilität von Plattenform, Freiwinkel, Toleranzklasse und Befestigung zum passenden Halter. Die Trigon-Form mit zylindrischem Loch und 0° Freiwinkel sorgt für hohe Stabilität in Außen- und Innendreh-Anwendungen. Eine präzise Plattendicke von 4,76 mm unterstützt sichere Spannverhältnisse und reduziert Vibrationen, was die Maßhaltigkeit und Werkzeuglebensdauer verbessert. Klare Auswahlkriterien für unterschiedliche Bearbeitungsaufgaben Für kontinuierliche bis leicht unterbrochene Schnitte bietet die WNMG080412 mit doppelseitigem Spanbrecher eine wirtschaftliche Lösung. Der Eckenradius 1.2 mm ermöglicht ruhige Schnittbilder und ist besonders geeignet für moderate Schnittwerte in der mittleren Stahlbearbeitung. Kleine Werkstätten ebenso wie produktionsorientierte Fertiger finden in dieser Ausführung eine vielseitige Option für Außen- und Innendrehen. Setzen Sie auf die T9215-Sorte von Tungaloy für zuverlässige, wirtschaftliche Zerspanung – bei Fragen erreichbar unter info@metav-werkzeuge.com oder +49 2822 7131930 Technische Daten Artikelnummer: 6772408 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412 Fakten Eckenradius: 1.2 mm Winkel: 80° Plattendicke: 4,76 mm Freiwinkel: 0° Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 (für mittlere Stahlbearbeitung) Plattenform: Trigon Plattengröße: 08 Mit Loch: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der WNMG080412 bearbeiten? Die WNMG080412 T9215 Tungaloy-Wendeplatte ist primär für Stahl in mittleren Härtebereichen ausgelegt und eignet sich besonders für kontinuierliche bis leicht unterbrochene Schnitte. Was bedeutet die Sortenbezeichnung T9215? Die T9215-Kennzeichnung steht für eine CVD-beschichtete Hartmetall-Sorte, die hohe Verschleißfestigkeit mit guter Bruchsicherheit kombiniert und somit für produktive Zerspanung optimiert ist. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 1.2 mm sorgt für stabile Schnittbedingungen, reduziert Kerbwirkung und verbessert die Oberflächenqualität bei moderaten Schnittwerten. Ist die Wendeplatte mit gängigen Haltern kompatibel? Ja, die ISO-Genormung der WNMG080412 stellt die Kompatibilität in Bezug auf Form, Freiwinkel, Toleranzklasse und Befestigung sicher; passende Halter sind entsprechend der ISO-Norm zu wählen. Welche Vorteile bringt der doppelseitige Spanbrecher? Der doppelseitige Spanbrecher ermöglicht längere Nutzungsintervalle der Platte, gleichmäßige Spanbildung und erhöht dadurch die Wirtschaftlichkeit in der Serienfertigung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of robust T9215 CVD-coated carbide and an optimised AS chipbreaker for stable, productive turning of medium steels; the ISO WNMG geometry ensures straightforward integration into ISO-compatible holders. Order the insert directly via Metav Werkzeuge or consult the technical advisors for setup recommendations. WNMG080412-AS T9215 – ISO turning insert, CVD-coated carbide with AS chipbreaker (Tungaloy) A WNMG080412-AS T9215 indexable insert designed for ISO-compliant turning operations, optimised for medium steel machining with reliable chip control and long tool life CVD-coated carbide T9215 grade Optimised AS chipbreaker for steel ISO WNMG 080412 geometry 80° trigon shape with cylindrical hole Consistent productivity for medium steel turning The T9215 grade combines a CVD coating with a tough carbide substrate to deliver high wear resistance and enhanced fracture toughness. This balance makes the insert particularly suitable for continuous and slightly interrupted cuts in medium-strength steel, where machining stability and repeatable tool life are priorities. By selecting this grade, production processes gain fewer tool changes and more predictable component tolerances, supporting efficient batch runs and stable cycle times. Geometry and holder compatibility that reduce setup time The ISO WNMG 080412 geometry (trigon form) with an 80° angle and a 0° relief is designed for a broad range of standard external and internal turning operations. The insert thickness of 4.76 mm and the cylindrical locating hole ensure positive clamping in compatible ISO holders; compatibility depends on form, free angle, tolerance class, fastening method, size and thickness. For workshop planning, the clear dimensional references simplify holder selection and reduce the risk of mismatched interfaces during tool changes. Predictable chip control and surface quality The AS chipbreaker is tailored for steel applications and promotes short, controlled chips under stable cutting conditions, which aids in safe chip evacuation and consistent surface finishes. With a 1.2 mm corner radius the insert supports good surface integrity without excessive cutting forces, making it a reliable choice when balancing component finish and productivity. This controlled behaviour reduces rework and downstream cleaning operations, contributing to a smoother manufacturing flow. Practical use cases and process recommendations Designed as a first choice for medium steel machining, the insert integrates into the ISO turning system together with a suitable external holder or boring bar, shim/clip sets and replacement screws. Typical uses include external profiling, shoulder turning and light interrupted turning where a combination of tool life and chip control is required. When machining harder or more challenging materials, select a different chipbreaker or grade appropriate to the workpiece and cutting conditions to maintain process security. Contact Metav Werkzeuge for application advice and to order the WNMG080412-AS T9215 insert; technical advisors are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6772389-Tungaloy Manufacturer article number: 6772389 Manufacturer SKU: TUN6772389 Product name: WNMG080412-AS T9215 Data Geometry/ISO: 080412 Corner radius: 1.2 mm Included angle: 80° Relief (free) angle: 0° Thickness: 4.76 mm Hole: with cylindrical hole Form: trigon (WNMG) Chipbreaker: AS Special features Material: carbide Coating: CVD-coated (T9215) Application: turning (external and internal) Recommended for: medium steel machining Model series: ISO turning inserts Typical system: insert + external holder/boring bar + shim/clip + screws FAQ Which holders are compatible with this insert? Compatibility is determined by the ISO WNMG form, the insert thickness (4.76 mm), the locating hole style and the tolerance class; the WNMG080412-AS T9215 fits standard ISO WNMG holders designed for 080412 geometry. Is the T9215 grade suitable for interrupted cuts? The T9215 grade is designed for continuous to slightly interrupted cuts in medium steels; for heavy interruptions consider a tougher grade or a different chipbreaker. What surface finish can be expected with this chipbreaker and radius? With the AS chipbreaker and a 1.2 mm corner radius, expect consistent surface quality for general turning tasks in medium steel while maintaining effective chip control. Can this insert be used for internal turning? Yes, the insert is suitable for internal turning when combined with an appropriate boring bar that accepts ISO WNMG inserts and provides correct support and rigidity. How should the chipbreaker choice be adapted for different steels? Choose a chipbreaker and grade according to workpiece material, cutting strategy and machine rigidity; the AS chipbreaker is optimised for steels and offers good chip control under stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a TH chipbreaker for reliable chip control, and ISO compatibility to maintain steady productivity in turning operations; order the insert directly via Metav Werkzeuge or consult their advisors for application-specific selection. WNMG080412-TH T9215 WNMG 080412 ISO turning insert for turning by Tungaloy The WNMG080412-TH T9215 is an ISO-format triangular turning insert engineered for medium steel machining; its CVD-coated carbide grade balances wear resistance and fracture toughness for continuous to lightly interrupted cuts. WNMG 080412 T9215 for turning operations CVD-coated carbide for increased wear resistance TH chipbreaker for stable chip formation ISO-standard trigon shape with cylindrical hole Boosted productivity through durable CVD-coated carbide The CVD-coated carbide grade T9215 combines high wear resistance with reliable edge integrity, making it suitable for sustained production runs. The coating enhances thermal stability and reduces flank wear, which in turn extends tool life and reduces changeover frequency. For machining centres and automated turning cells, this material pairing leads to more consistent cycle times and fewer unplanned tool changes, supporting leaner workflows and higher throughput. Versatile ISO geometry that ensures secure fit and repeatability Supplied in the ISO-designated trigon format, the insert offers an 80° cutting geometry and a corner radius of 1.2 mm, which together provide a robust cutting edge for general-purpose turning. Compatibility with the chosen holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the standardised dimensions allow straightforward interchangeability with ISO holders and adapters. The indexable insert concept simplifies stocking and replacement while ensuring repeatable part quality. Reliable chip control and application fit for medium steel Equipped with the TH chipbreaker, the insert offers consistent chip formation for medium steel machining in continuous to lightly interrupted operations, reducing the risk of built-up edge and improving surface finish. The system approach—insert, suitable outer holder or boring bar, shim/clamping set and replacement screws—allows tailored setups for turning, boring and shoulder operations. For application advice and selection of the optimum chipbreaker and grade for a given stability and cutting style, Metav Werkzeuge consultants are available to assist with specification and integration. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy WNMG080412-TH T9215 and availability via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6772417 Manufacturer SKU: TUN6772417 Brand: Tungaloy Model designation: WNMG080412-TH T9215 ISO designation: WNMG080412-TH Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Cutting angle: 80° Clearance (rake) angle: 0° Size: 08 Special features Material: carbide Coating: CVD Chipbreaker: TH Plate form: trigon (triangular) Hole: with cylindrical hole Application: turning (external and internal) Suitable for: medium steel machining System composition: ISO insert, outer holder/boring bar, shim/clamping set, replacement screws Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials is this insert designed for? The WNMG080412-TH T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade delivers wear resistance and toughness suited to continuous and lightly interrupted cuts. What does the T9215 designation indicate? T9215 denotes the CVD-coated carbide grade selected for a balanced combination of high wear resistance and fracture toughness, intended to provide productive tool life in steel applications. How does the TH chipbreaker affect performance? The TH chipbreaker on this indexable insert promotes stable chip formation and easier chip evacuation, which helps to maintain surface finish and reduce the likelihood of built-up edge during turning. How is the insert secured in the holder? The insert is provided with a cylindrical hole for positive clamping; compatibility with a specific holder is governed by the insert form, clearance angle, tolerance class, fastening method, size and thickness. What influence does the 1.2 mm corner radius have? A corner radius of 1.2 mm increases edge strength for medium-duty turning while still supporting acceptable surface quality; it represents a compromise between robustness and finish for general machining tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
WNMG 080412 T9215 Wendeplatte für Drehen – Tungaloy WNMG080412-ZF T9215 ist eine ISO-genormte Wendeplatte für das Drehen, ausgelegt für mittlere Stahlbearbeitung und hohe Produktivität bei kontinuierlichem bis leicht unterbrochenem Schnitt. CVD-beschichtetes Hartmetall für lange Standzeit Optimal für Außen- und Innendrehen bei Stahl Trigon-Form mit zylindrischem Loch für sicheren Sitz Spanbrecher ZF sorgt für stabile Spanbildung Produktdesign für effiziente Zerspanung Die WNMG080412-ZF T9215 kombiniert CVD-beschichtetes Hartmetall mit einer robusten Geometrie, um Verschleiß und Bruch zuverlässig zu reduzieren. Durch die Beschichtung (CVD: chemische Dampfabscheidung) wird die Härte an der Schneidkante erhöht, was längere Standzeiten und weniger Werkzeugwechsel ermöglicht. Der Nutzen liegt in höherer Maschinenauslastung und geringeren Rüstzeiten bei Serienfertigung. Anwendungsprofil und Vorteile im Fertigungsalltag Für das Drehen von Stahl bietet die Platte durch den Spanbrecher ZF eine kontrollierte Spanform, die insbesondere bei kontinuierlichem und leicht unterbrochenem Schnitt zu konstanter Oberflächengüte führt. Die trigonale Plattenform liefert mehrere Schneidecken und reduziert die Werkzeugkosten pro Bauteil. Kompatibilität wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichergestellt, wodurch die Integration in vorhandene Haltersysteme unkompliziert ist. Zuverlässigkeit, Handling und wirtschaftlicher Nutzen Mit Eckenradius 1,2 mm und Freiwinkel 0° bietet die Platte eine stabile Schneidkante für reproduzierbare Ergebnisse. Die Ausführung mit zylindrischem Loch sorgt für sicheren Halt im Halter und minimiert Vibrationsrisiken. Anwender profitieren von weniger Stellenwechseln, planbaren Standzeiten und damit niedrigeren Stückkosten. Die Kombination aus Sortenwahl T9215 und geeigneter Spanbrecher-Geometrie erhöht die Produktivität in fertigungsorientierten Betrieben. Empfehlung: Die WNMG 080412 T9215 von Tungaloy ist erste Wahl für produktive Stahlbearbeitung; für technische Beratung und Auswahl des passenden Spanbrechers kontaktieren Sie bitte Metav Werkzeuge per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Leistungsmerkmale Artikelnummer: 6773881 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-ZF Daten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Plattengröße: 08 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtet (chemische Dampfabscheidung) Sorte: T9215 (für mittlere Stahlbearbeitung) Spanbrecher: ZF (optimierte Spanform für mittlere Schnittbedingungen) Plattenform: trigon Loch: mit Loch, zylindrisches Loch Einsatz: Drehen Hersteller-SKU: TUN6773881 FAQ Welche Werkstoffe bearbeitet die WNMG080412-ZF T9215 am besten? Die WNMG080412-ZF T9215 von Tungaloy ist für mittlere Stahlbearbeitung optimiert; die Sorte T9215 verbindet Verschleißwiderstand mit Bruchsicherheit und eignet sich besonders für produktive Serienprozesse. Ist die Platte auch für leicht unterbrochene Schnitte geeignet? Ja, die Kombination aus CVD-Beschichtung und stabiler Geometrie macht die WNMG080412-ZF T9215 robust gegenüber leichten Unterbrechungen und reduziert Ausfallrisiken im Betrieb. Wie viele Schneidecken bietet die Plattenform? Die trigonale Plattenform bietet mehrere Schneidecken, wodurch die WNMG080412-ZF T9215 wirtschaftlich ist, da mehrfaches Umdrehen möglich ist. Welche Besonderheit hat der Spanbrecher ZF? Der Spanbrecher ZF formt kurze, kontrollierte Späne und verbessert die Spanabfuhr bei Stahlbearbeitung, was zu gleichmäßiger Oberflächengüte und längeren Standzeiten führt. Passt die Platte in Standard-Außenhalter? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab; die WNMG080412-ZF T9215 ist ISO-genormt und lässt sich in passende Außenhalter und Bohrstangen integrieren. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9215 Wendeplatten - Tungaloy
WNMG 080412 T9215 – Drehwendeschneidplatte für Drehen von Tungaloy Die WNMG 080412 T9215 ist eine ISO-genormte Trigon-Wendeschneidplatte für Außen- und Innendrehen, optimiert für produktives Drehen mittlerer Stahlqualitäten. ISO-genormte Trigonplatte für universellen Einsatz CVD-beschichtetes Hartmetall für hohe Standzeit THS-Spanformer für stabile Spanbildung 0° Freiwinkel und zylindrisches Loch für sichere Fixierung Hohe Standzeit durch CVD-beschichtetes Hartmetall Die Platte basiert auf CVD-beschichtetem Hartmetall der Sorte T9215, das speziell für die mittlere Stahlbearbeitung entwickelt wurde. Durch die Beschichtung erhöht sich die Verschleißfestigkeit, gleichzeitig bleibt die Bruchsicherheit erhalten, was zu konstanteren Standzeiten und weniger Werkzeugwechseln führt. Das Ergebnis ist höhere Produktivität bei kontinuierlichem bis leicht unterbrochenem Schnitt. Geometrie und Kompatibilität für stabile Prozesse Die trigone Plattenform mit einem Eckenradius von 1,2 mm, einer Plattendicke von 4,76 mm und einem Winkel von 80° sorgt für robuste Schneidkanten und gute Kraftaufnahme. Die Kompatibilität mit Haltern wird durch Form, Freiwinkel 0°, Toleranzklasse, Befestigung, Größe und Dicke bestimmt und ermöglicht einfache Austauschbarkeit in ISO-Systemen. Dadurch bleibt die Prozessplanung transparent und die Einbaukontrolle einfach. Anwendungsspektrum und Zielgruppe Die Wendeschneidplatte eignet sich für Außen- und Innendrehen in Fertigung und Instandhaltung, besonders dort, wo mittlere Stähle mit gleichmäßigem Schnitt bearbeitet werden. Fertigungsingenieure und Zerspaner profitieren von planbaren Standzeiten und gleichbleibender Oberflächengüte, was Rüstzeiten und Nacharbeit reduziert. Die Platte ist geeignet für Serienfertigung und den robusten Werkstattbetrieb. Spanformer THS und praktische Vorteile Der Spanformer THS ist auf stabile Spanbildung ausgelegt und reduziert Spanverwicklungen bei mittleren Schnitten. In Kombination mit der Sorte T9215 entsteht eine wirtschaftliche Lösung: weniger Maschinenstillstand, bessere Kontrollierbarkeit des Spanverhaltens und konstante Werkzeugleistung. Für Anwender bedeutet das weniger Stillstandzeiten und eine verbesserte Gesamtanlageneffektivität. Empfehlung: Die WNMG 080412 T9215 von Tungaloy bietet eine zuverlässige Kombination aus Verschleißfestigkeit und Spanstabilität für produktives Drehen mittlerer Stähle; bei technischen Fragen oder Beratung erreichen Sie Metav Werkzeuge per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 6772419 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-THS T9215 SKU Hersteller: TUN6772419 Fakten Eckenradius: 1,2 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (T9215) Sorte: T9215 (verschleißfest, für mittlere Stahlbearbeitung) Spanformer: THS — Spanformer für stabile Spanbildung Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: Trigon Freiwinkel: 0° Systemaufbau: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe sind für die WNMG 080412 T9215 geeignet? Die WNMG 080412 T9215 von Tungaloy ist erste Wahl für die mittlere Stahlbearbeitung und wurde für kontinuierliche bis leicht unterbrochene Schnitte entwickelt. Welche Geometrischen Kennwerte hat die Platte? Die Platte hat einen Eckenradius von 1,2 mm, einen Winkel von 80° und eine Plattendicke von 4,76 mm; diese Werte geben Auskunft über Belastbarkeit und Einsatzbereich. Wie beeinflusst der Spanformer THS die Bearbeitung? Der THS-Spanformer sorgt für stabile Spanbildung und reduziert Spanverwicklungen, was in Serienfertigung die Prozesssicherheit und Maschinenverfügbarkeit erhöht. Ist die Platte ISO-kompatibel und wie wird die Halterkompatibilität geprüft? Ja, die Platte ist ISO-genormt; die Kompatibilität zum Halter wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Welche Artikelnummer und SKU hat das Produkt? Herstellerartikelnummer: 6772419, SKU: TUN6772419; die Kombination erleichtert Bestellung und Logistik. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance and ASW chipbreaker geometry for controlled chip formation, ensuring stable, productive turning of medium steels; order directly via Metav Werkzeuge or consult our specialists for matching holder and application advice. WNMG 080412 T9215 – ISO turning insert for medium-steel machining by Tungaloy WNMG080412-ASW T9215 is an ISO-standard trigon insert designed for external and internal turning in medium-steel applications, combining a robust cutting grade with a controlled chipbreaker for productive finishing and semi-roughing operations CVD-coated carbide for high wear resistance Optimised for medium steel machining Trigon shape, 80° cutting angle, 1.2 mm radius ISO-compatible insert with cylindrical hole Consistent productivity through a wear-resistant grade The T9215 grade is a CVD-coated carbide engineered as a first choice for medium-steel machining. Its composition balances high wear resistance with fracture toughness, which translates directly into longer tool life and fewer unexpected interruptions during continuous or slightly interrupted cuts. For process planners this means improved uptime and a predictable replacement interval, supporting lean production cycles. Compatibility with ISO holders is governed by geometry — form, clearance angle, tolerance class, fastening and thickness — so the insert integrates into standard toolholders without special adaptations. Geometry that improves accuracy and surface quality A trigon-shaped insert with an 80° cutting angle and a 1.2 mm nose radius provides a reliable compromise between strength and surface finish. The larger nose radius increases tool edge support, reducing deflection and producing a finer surface at comparable feeds, while the 0° clearance supports positive cutting engagement on many carrier designs. The 4.76 mm plate thickness and the central cylindrical hole ensure secure clamping and repeatable positioning, which benefits repeatability in production runs and minimises vibration-related wear. In practical terms, this geometry contributes to consistent part tolerances and a better first-pass yield. Predictable chip control and application flexibility The ASW chipbreaker combined with the T9215 grade is tuned to deliver controlled chip formation in medium steels, reducing entanglement and evacuation issues in both external and internal turning. Selecting the correct chipbreaker and grade according to workpiece material, machining stability and cut type avoids downtime caused by poor chip flow. For operations that alternate between finishing and light roughing, this insert provides a versatile solution that reduces tool inventory complexity while maintaining performance across a range of feeds and depths of cut. Practical benefits for workshop integration and tool management Using ISO-standard inserts like this one simplifies tooling logistics: indexing is straightforward, replacement is fast, and stock-keeping is easier with standard sizes. The combination of CVD coating and a robust carbide substrate lowers the frequency of regrinds and replacements, which reduces indirect costs and handling time. For applications where moderate interruptions in cut occur, the grade’s fracture resistance adds reliability. If clarification is needed on holder compatibility or the best chipbreaker for a particular stability condition, guidance is available to align the insert with the correct holder geometry and clamping parts. For application-specific advice on using Tungaloy’s WNMG080412-ASW T9215 insert in medium-steel turning and for rapid supply via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774122 SKU: 6774122-Tungaloy Model series: ISO turning inserts Designation: WNMG080412-ASW T9215 Material: Carbide (cemented carbide) Core data Nose radius: 1.2 mm Plate thickness: 4.76 mm Size: 08 Cutting angle: 80° Clearance angle: 0° Special features Grade: T9215 (CVD-coated carbide) Chipbreaker: ASW Plate shape: Trigon Hole: with cylindrical hole Typical application: External and internal turning Suited for: Continuous and slightly interrupted cuts FAQ What materials is this insert suited for? The WNMG080412-ASW T9215 insert is optimised for medium steels; the T9215 CVD-coated carbide grade provides wear resistance and toughness tailored to that material group. How does the ASW chipbreaker affect machining? The ASW chipbreaker promotes controlled chip formation in medium-steel turning, reducing chip entanglement and improving evacuation compared with generic geometries. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; the WNMG080412-ASW format is designed for ISO-standard holders when geometry and clamping match. What benefits does the 1.2 mm nose radius bring? A 1.2 mm radius increases edge support, improves surface finish at moderate feeds and enhances edge strength, which helps when machining longer runs with stable setups. Can this insert handle interrupted cuts? The T9215 grade combines toughness and wear resistance, making the insert suitable for continuous and slightly interrupted cuts; heavy interruptions may require a different geometry or grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide grade T9215 and a robust 1.2 mm corner radius delivers high wear resistance and reliable fracture control for productive turning of medium steels; order the insert directly via Metav Werkzeuge or contact their consultants for application guidance. WNMG 080412 T9215 — Tungaloy turning insert for medium steel, 80° trigon WNMG080412 T9215 offers an ISO-format trigon insert designed for external and internal turning operations, optimised for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Robust fracture resistance for medium steel Double-sided chipbreaker for stable chip control ISO WNMG080412 trigon form, 80° nose Higher productivity through wear-resistant carbide The CVD-coated carbide grade T9215 is engineered to combine wear resistance with fracture toughness, translating into longer tool life and fewer indexings. For production environments focusing on medium steel, this chemistry supports sustained cutting at productive parameters, reducing downtime associated with frequent insert changes. The coating also improves performance where light interruptions occur, so machining cycles remain efficient and stable. Stable chip control for predictable surface quality The double-sided chipbreaker geometry provides consistent chip formation, improving swarf evacuation and reducing the risk of built-up edge. Better chip control leads directly to more predictable surface finishes and fewer rejects. For shops seeking repeatable results on external and internal turning, the controlled chip flow reduces secondary operations and contributes to process reliability. ISO compatibility for simple holder integration As an ISO-format trigon insert, compatibility is defined by form, nose angle and thickness; the WNMG080412 shape fits standard external holders and boring bars when the correct clamping and tolerance class are observed. The insert’s 80° geometry provides a balance between cutting strength and accessibility in tight features, while the 4.76 mm thickness supports rigidity in interrupted cuts. This simplifies toolroom inventory and shortens setup times across diverse turning tasks. Geometry choices that reduce breakage risk The 1.2 mm corner radius and trigon form distribute cutting forces to prevent localised stress peaks that typically lead to edge chipping. Where dimensional tolerances and part strength are critical, selecting the appropriate radius and grade minimises the chance of fracture while maintaining acceptable surface quality. For mixed-production environments, this balance supports versatility without sacrificing component integrity. Contact Metav Werkzeuge for expert advice on Tungaloy inserts like the WNMG080412 T9215 and to confirm availability; Metav Werkzeuge can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6772374 SKU: 6772374-Tungaloy Manufacturer SKU: TUN6772374 Model series: ISO turning inserts Material: carbide Facts Corner radius: 1.2 mm Nose angle: 80° Thickness: 4.76 mm Insert size: 08 Shape: trigon Special features Grade: T9215 (CVD-coated carbide) Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Typical use: medium steel, continuous to light interrupted cuts FAQ Which materials is this insert suited for? The WNMG080412 T9215 insert is optimised for medium steel applications; the CVD-coated carbide grade T9215 combines wear resistance and fracture toughness suitable for continuous to slightly interrupted turning. How does the chipbreaker affect performance? The double-sided chipbreaker on the insert provides controlled chip formation and evacuation, which improves surface quality and reduces swarf-related interruptions during turning. Is the insert compatible with standard ISO holders? Yes, the ISO-format trigon design is compatible with holders that accept WNMG080412 inserts; correct matching of form, clearance angle and clamping method ensures proper fit. What advantages does the 1.2 mm corner radius offer? A 1.2 mm corner radius balances component strength and surface finish while distributing cutting forces to lower the risk of edge chipping during heavier or interrupted cuts. Can this insert be used for internal turning? The trigon geometry and 80° nose make the insert suitable for many internal turning applications when the appropriate boring bar or holder is used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9225 Wendeplatten - Tungaloy
WNMG080412 T9225 Tungaloy-Wendeplatte — ISO-Drehwendeschneidplatte für Drehen Die WNMG080412 T9225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen und bietet robuste Performance bei mittleren bis schweren Stahlbearbeitungen WNMG080412 T9225 von Tungaloy Trigonform mit 80° Keilwinkel für stabile Schneidlage CVD-beschichtetes Hartmetall für erhöhte Standzeit Eckenradius 1,2 mm für zuverlässige Schnittkontrolle Mit zylindrischem Loch und doppelseitigem Spanbrecher Produktive Zerspanung bei wechselnden Eingriffsbedingungen Die WNMG080412 Tungaloy-Wendeplatte wurde für produktive Zerspanung unter variierenden Schnittbedingungen entwickelt. Die Kombination aus CVD-Beschichtung und zäher Hartmetallmatrix ermöglicht konstante Zerspanleistung auch bei leicht unterbrochenem Schnitt. Anwender profitieren von geringeren Ausfallzeiten, weil die Sorte T9225 speziell auf mittlere bis schwere Stahlbearbeitung ausgelegt ist und eine ausgewogene Mischung aus Zähigkeit und Verschleißwiderstand bietet Langlebigkeit durch Hartmetall und Beschichtung Das verwendete Hartmetall in Verbindung mit der CVD-Beschichtung sorgt für hohe Verschleißfestigkeit und reduzierte Kantenabrundung. CVD (chemische Gasphasenabscheidung) liefert eine dichte, haftfähige Schicht, die Wärmebeständigkeit und Standzeit erhöht. Das Ergebnis ist eine stabilere Schneidkante, die längere Einsatzintervalle erlaubt und die Gesamtwerkzeugkosten pro Bauteil senkt Einsetzbar für typische Drehanwendungen und Werkstoffe Für das Drehen von Stahl ist diese Wendeschneidplatte ideal; die Sorte T9225 bietet eine breite Werkstoffabdeckung und stabile Spanbildung. Die Platte eignet sich sowohl für Außen- als auch für Innendrehen; der Eckenradius 1,2 mm unterstützt die Oberflächengüte und Prozesssicherheit. Anwender mit wechselnden Betriebsbedingungen finden hier eine universelle Lösung, die Standzeit und Produktivität ausbalanciert Kompatibilität, Aufnahme und Systemintegration Die ISO-Norm gewährleistet einfache Integration in gängige Außenhalter oder Bohrstangen; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Kompatibilität. Die trigonförmige Geometrie in Verbindung mit dem 80° Keilwinkel sorgt für sichere Lagerung im Halter und reduziert Vibrationen. Das zylindrische Loch vereinfacht die Befestigung und den raschen Plattenwechsel Empfehlung: Für wirtschaftliche Serienfertigung und robuste Stahlbearbeitung die WNMG080412 Tungaloy-Wendeplatte verwenden; bei Fragen steht Metav Werkzeuge gern zur technischen Beratung zur Verfügung: info@metav-werkzeuge.com | +49 2822 7131930 Produkteigenschaften Artikelnummer: 6781373 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412 Fakten Eckenradius: 1,2 mm Keilwinkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Sorte: T9225 Beschichtung: CVD (chemische Gasphasenabscheidung) Plattenform: Trigon Loch: mit Loch (zylindrisches Loch) Spanbrecher: doppelseitig Anwendung: Drehen FAQ Was unterscheidet die T9225-Sorte von anderen Sorten? Die Sorte T9225 der WNMG080412 Tungaloy-Wendeplatte ist CVD-beschichtet und zielt auf hohe Zähigkeit bei mittleren bis schweren Stahlbearbeitungen ab. Dadurch entsteht stabile Spanbildung und verbesserte Standzeit gegenüber unbeschichteten Varianten Für welche Drehaufgaben ist diese Wendeplatte besonders geeignet? Die WNMG080412 Tungaloy-Wendeplatte eignet sich für Außen- und Innendrehen bei wechselnden Eingriffsbedingungen, insbesondere für mittlere bis schwere Stahlbearbeitung, wo Zähigkeit und Verschleißschutz gefragt sind Wie beeinflusst der Eckenradius von 1,2 mm die Bearbeitung? Ein Eckenradius von 1,2 mm verbessert die Schnittstabilität und hilft, die Oberflächengüte zu steigern. Bei der WNMG080412 sorgt dieser Radius für zuverlässige Schnittkontrolle und längere Werkzeuglebensdauer Welche Vorteile bietet die Trigonform dieser Wendeschneidplatte? Die trigonförmige Plattengeometrie der WNMG080412 erhöht die Stabilität im Halter und reduziert Schwingungen. Dadurch profitieren Anwender von konstanteren Schnitten und besserer Prozesssicherheit Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Kombination aus Hartmetallsubstrat und der T9225-CVD-Beschichtung macht die Platte widerstandsfähig gegen Kantenbruch und geeignet für leicht unterbrochene Schnitte im Stahl Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated cemented carbide grade and a robust TS chipbreaker ensures consistent performance in medium to heavy steel turning; the trigon WNMG geometry with a 1.2 mm corner radius delivers reliable chip control and long tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. WNMG080412-TS T9225 — WNMG 080412 T9225 turning insert by Tungaloy, CVD-coated universal grade WNMG080412-TS T9225 is an ISO-format trigon turning insert designed for external and internal turning in varying engagement conditions CVD-coated cemented carbide grade T9225 Robust TS chipbreaker for mixed cuts Trigon geometry with 1.2 mm corner radius 0° rake angle for stable cutting Consistent cutting performance for variable engagement The T9225 grade is a CVD-coated cemented carbide developed for robustness during medium to heavy steel turning where intermittent cuts or varying entry conditions occur. The coating improves thermal stability and wear resistance, while the substrate maintains toughness; this combination reduces flank wear and extends life under fluctuating loads. By selecting a universal grade like T9225, shops benefit from fewer tool changes and more predictable cycle times, which supports higher machine utilisation and steadier production throughput. Geometry and chip control that reduce rework A trigon insert with an included angle of 80° and a 1.2 mm corner radius provides a balance between edge strength and finish capability. The TS chipbreaker is matched to the grade to break and evacuate chips reliably in typical turning operations, lowering the risk of built-up edge and surface defects. The insert’s central cylindrical hole enables secure clamping in compatible holders; combined with a 4.76 mm plate thickness and 0° rake, it offers mechanical stability for finishes and semi-finishing passes alike. Clear compatibility and straightforward system integration Compatibility depends on holder geometry, clearance angle, tolerance class, fixing method, size and plate thickness. The ISO-format design follows standard dimensions, simplifying selection of suitable external holders, boring bars or adapters. Where holder form or clamp type varies, confirm that the trigon WNMG seat, hole style and thickness match the toolholder’s specifications. This approach prevents installation errors and contributes to reproducible part quality across shifts and machines. Practical benefits for production and maintenance Using a universal, robust grade such as T9225 reduces inventory complexity while maintaining process reliability in mixed-production environments. The combination of CVD coating and a tough carbide core supports longer intervals between index changes and predictable tool consumption rates. For operations aiming to improve overall equipment effectiveness, the insert offers a pragmatic balance between cutting performance and cost-efficiency, especially where workpiece material and engagement conditions change frequently. For application guidance or to secure stock of the Tungaloy WNMG080412-TS T9225 insert, contact Metav Werkzeuge’s technical advisors via info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and availability Technical data Article number: 6781260 Manufacturer SKU: TUN6781260 Model series: ISO turning indexable inserts Label: WNMG080412-TS T9225 Facts Corner radius: 1.2 mm Included angle: 80° Thickness: 4.76 mm Size designation: 08 Rake angle: 0° Special features Grade: T9225 Substrate: cemented carbide Coating: CVD Chipbreaker: TS Plate form: trigon Hole style: cylindrical hole Typical application: external and internal turning of steel FAQ What materials is this insert suited for? The WNMG080412-TS T9225 insert is formulated primarily for medium to heavy steel turning; the CVD-coated carbide substrate and TS chipbreaker handle variable engagement and intermittent cuts effectively. How does the TS chipbreaker affect performance? The TS chipbreaker on this trigon insert improves chip control during turning, lowering the risk of built-up edge and assisting with smooth evacuation, which in turn helps maintain consistent surface quality. Is the WNMG080412-TS T9225 compatible with standard ISO holders? The insert follows ISO dimensions for trigon WNMG inserts; compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness — confirm these parameters with the toolholder specifications. What are the key dimensional features to check before mounting? Verify the 1.2 mm corner radius, 4.76 mm plate thickness, 08 size designation and the cylindrical hole style against the holder to ensure correct seating and clamping. Can this insert be used for finishing passes? Yes; the 1.2 mm corner radius combined with the 0° rake and robust grade allows for finishing and semi-finishing operations, offering an acceptable surface quality in many steel turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, the universal T9225 grade for medium to heavy steel, and a secure trigon fit for reliable production. Order the WNMG080412-TM T9225 turning insert directly via Metav Werkzeuge or consult their technical team for application-specific advice. WNMG 080412 T9225 — indexable turning insert by Tungaloy (CVD-coated carbide, 1.2 mm corner radius) WNMG080412-TM T9225 is an ISO-standard indexable turning insert designed for medium to heavy steel turning, offering a robust CVD-coated carbide grade and a TM chipbreaker for variable cutting conditions CVD-coated carbide for robust wear resistance Universal T9225 grade for medium to heavy steel 1.2 mm corner radius for stable edge strength Trigon WNMG form with cylindrical hole for secure fit Consistent performance under variable cutting conditions The CVD-coated carbide construction and the T9225 grade combine toughness with wear resistance to maintain cutting-edge stability in medium to heavy turning tasks. The composition is tuned for applications where occasional interruptions or changing engagement demand higher fracture resistance; this leads to fewer edge failures and more predictable tool life. The chip control geometry contributes to consistent chip formation, reducing downtime for chip clearing and supporting a dependable production rhythm. Secure mounting and ISO compatibility for straightforward integration The trigon-shaped insert with a cylindrical hole and ISO designation ensures compatibility with ISO-standard turning holders when form, relief angle, tolerance class, fastening, size and thickness are matched. Key dimensional data such as the 4.76 mm thickness, 08 insert size and the 80° included angle simplify planning for machine set-up. Choosing the correct holder and clamping kit avoids movement at the cutting edge, translating directly into repeatable part accuracy and reduced rework. Chip management and recommended applications Equipped with the TM chipbreaker, the insert is configured for stable chip evacuation in a range of feeds and depths typical for external and internal turning. The combination of geometry and the CVD coating supports machining of unalloyed and alloyed steel grades under medium to heavy material removal rates. For interrupted cuts or less rigid set-ups, the tougher grade of this insert improves resilience against chipping. Match feed, depth and holder rigidity to the insert’s strengths to achieve the best surface finish and economical metal removal. For robust medium-to-heavy steel turning, order the Tungaloy WNMG080412-TM T9225 insert through Metav Werkzeuge or contact their technical team for tailored machining advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6780855 SKU: 6780855-Tungaloy Manufacturer SKU: TUN6780855 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Thickness: 4.76 mm Insert size: 08 Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: CVD-coated Chipbreaker: TM Shape: trigon ISO designation: WNMG080412-TM Application: turning (external and internal) Compatibility: ISO-standard holders (form, size, thickness, fastening determine compatibility) FAQ What applications is this insert suited for? The WNMG080412-TM T9225 insert by Tungaloy is intended for external and internal turning, particularly in medium to heavy steel machining where toughness and chip control are required. Which materials can the insert machine effectively? This Tungaloy carbide insert performs best in steel and alloyed steel under medium to heavy cutting conditions; the T9225 grade provides added toughness for variable engagement and light interruptions. How is compatibility with the holder ensured? Compatibility depends on holder form, relief (free) angle, tolerance class, fastening method, insert size and thickness; check these parameters against the ISO designation WNMG080412-TM before mounting. What advantages does the T9225 grade offer? The T9225 grade balances wear resistance and toughness, improving resistance to chipping during interrupted cuts or less stable engagements while maintaining good overall tool life. Is the TM chipbreaker suitable for finishing passes? The TM chipbreaker is optimised for controlled chip formation during medium to heavy cutting; for fine finishing passes, a dedicated finishing geometry or adjusted cutting parameters may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com