WNMG 080416 AH6235 Wendeplatten - Tungaloy
The combination of a PVD-coated AH6235 grade and a 1.6 mm corner radius delivers robust performance for stainless steel turning and interrupted cuts; the insert’s trigon form and cylindrical hole ensure straightforward mounting in ISO-compatible holders. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. WNMG 080416 AH6235 ISO turning insert — PVD-coated carbide for turning, Tungaloy The WNMG080416-TM AH6235 is an ISO-format turning insert engineered for external and internal turning of stainless steels and other challenging materials, combining a tough PVD-coated carbide grade with a TM chipbreaker for improved chip control. PVD-coated AH6235 grade for stainless steel Trigon form WNMG with 1.6 mm corner radius 0° clearance angle for secure cutting Cylindrical centre hole for reliable clamping Higher reliability in stainless steel and interrupted cuts The PVD-coated cutting grade AH6235 is formulated to resist chipping and thermal degradation, making it especially suited to stainless steel and interrupted cutting conditions. The tougher carbide substrate increases resistance to fracture where surface hardness variations or interrupted engagement occur, while the PVD layer improves wear resistance and preserves the cutting edge. This combination results in fewer unplanned tool changes, a more predictable process and consistent part quality. Stable cutting geometry for repeatable surface finish The trigon insert geometry with a 1.6 mm corner radius and a 0° clearance angle provides a stable contact between insert and workpiece, supporting dimensional accuracy and surface integrity. The trigon form increases indexable edges per insert and helps distribute cutting forces, while the shallow corner radius balances edge strength and achievable finish. Compatibility with ISO holders is primarily determined by form, clearance angle, tolerance class, size and thickness; the cylindrical centre hole simplifies secure clamping and alignment in the toolholder. Process efficiency through optimised chip control and tool life The TM chipbreaker paired with the AH6235 grade is designed to produce controllable chips in common turning operations, reducing the risk of entanglement and enabling higher material removal rates where machine and setup stability permit. Predictable chip form and improved edge life contribute to elevated productivity and reduced cycle interruptions. For shops aiming to increase throughput, the combination of reliable edge integrity and consistent chip control supports longer runs and lower overall tooling consumption. Practical guidance for integration and selection As part of an ISO insert system — comprising the insert, a compatible external holder or boring bar, clamping seat and retaining screw — selection should match the chipbreaker and grade to the workpiece material, rigidity of the setup and the intended operation (roughing or finishing). Where interrupted cuts or high breakout risk exist, choose the AH6235 grade and the TM chipbreaker for enhanced toughness. For setup questions or help matching a holder, Metav Werkzeuge’s technical staff can provide tailored recommendations and supply details to ensure correct fitment. For tailored application advice and rapid supply of Tungaloy inserts, contact Metav Werkzeuge’s specialists via info@metav-werkzeuge.com or call +49 2822 7131930 — precise recommendations and order support are available. Technical data Manufacturer article number: 6903438 Manufacturer SKU: TUN6903438 SKU: 6903438-Tungaloy Article designation: WNMG080416-TM AH6235 Model series: ISO turning inserts Material: Carbide Coating/Grade: AH6235, PVD-coated Shape: Trigon Hole: with cylindrical hole Core technical data Size: 08 ISO code: 080416 Thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 80° Design and special features TM chipbreaker Suitable for turning (external and internal) Intended for stainless steel and interrupted cuts Trigon form for multiple cutting edges Cylindrical centre hole for secure clamping FAQ What materials is this insert best suited for? The WNMG080416-TM AH6235 insert from Tungaloy is optimised for stainless steel and applications with interrupted cuts, offering enhanced toughness and wear resistance. Can the insert be used for both external and internal turning? Yes, the ISO-format trigon insert is suitable for both external and internal turning when paired with a compatible holder; the cylindrical hole and standard form aid secure mounting. What benefits does the AH6235 grade provide? The AH6235 PVD-coated grade offers improved resistance to chipping and thermal wear, yielding longer edge life in demanding steel turning and interrupted operations. How does the 0° clearance angle affect performance? A 0° clearance angle enhances cutting stability and dimensional control in many turning setups, especially when rigidity is limited or when facing variable engagement. Which chipbreaker should be chosen for roughing operations? For higher material removal and robust chip control, the TM chipbreaker on this insert is designed to manage chips effectively in roughing and interrupted conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a PVD-coated cemented carbide grade tuned for heat-resistant alloys and a robust TH chipbreaker to ensure stable turning performance and predictable tool life — order directly via Metav Werkzeuge or consult our team for application advice. WNMG 080416 AH8015 WNMG_080416 AH8015 Turning Insert, PVD-coated cemented carbide by Tungaloy The WNMG080416-TH AH8015 is an ISO-standard turning insert for external and internal turning, optimised for machining heat-resistant alloys and general turning tasks. ISO-standard trigon insert 80° PVD-coated cemented carbide AH8015 1.6 mm corner radius for versatile cuts TH chipbreaker for controlled chip formation Predictable performance on heat-resistant alloys The insert’s PVD-coated cemented carbide grade AH8015 is specified for general machining of heat-resistant alloys, offering a balanced combination of wear resistance and cutting-edge stability. This balance reduces unscheduled downtimes by maintaining a stable edge geometry under thermal load, which in turn supports consistent surface finish and dimensional accuracy during medium to heavy turning operations. Clear geometry and mounting for reliable set-up The trigon plate with an included angle of 80° and a 1.6 mm corner radius provides versatile cutting geometry for a range of turning tasks. The plate’s cylindrical hole and standard ISO form ensure compatibility with holders where fit is determined by form, relief angle, tolerance class, fastening method, size and thickness. This clarity in mount and form reduces set-up time and risk of incorrect clamping. Chip control and process security Equipped with a TH chipbreaker, the insert produces predictable chip forms across typical turning feeds, improving swarf evacuation and reducing the likelihood of re-cutting or tool interference. The combination of chipbreaker geometry and the coating’s thermal behaviour increases process security, supporting higher machining reliability in serial production environments. Operational efficiency and economy of use By combining a PVD coating with a carbide substrate tailored for elevated temperatures, this insert extends the interval between indexings and tool changes. The result is improved machine uptime and better cost per part in medium- to high-volume turning. For workshops aiming to standardise tooling across different alloys, the insert offers a pragmatic compromise between economy and performance. Practical application advice for machinists and buyers Select the chipbreaker and grade according to workpiece material and clamping stability: the AH8015 grade is the recommended first choice for heat-resistant alloys and mixes efficiency with edge robustness. When in doubt about feed, speed or holder compatibility, rely on the ISO designation and the measured values (corner radius, thickness and relief angle) to match appropriate holders and cutting parameters. Contact Metav Werkzeuge for stock availability, machining recommendations and to secure the WNMG 080416 AH8015 for your production needs — eMail: info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6793745 Manufacturer SKU: TUN6793745 Stock SKU: 6793745-Tungaloy Label: WNMG080416-TH AH8015 Brand: Tungaloy Numbers / Core technical data Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Size designation: 08 Special features / Versions PVD-coated cemented carbide grade AH8015 Chipbreaker: TH Plate form: trigon Plate designation: WNMG080416-TH Hole style: cylindrical hole System: ISO-standard turning insert for external and internal turning FAQ What materials is this insert suitable for? The insert is designed primarily for heat-resistant alloys; the PVD-coated AH8015 grade balances wear resistance and edge stability for such materials. Which holders are compatible with the plate? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; use ISO-standard WNMG holders matched to the plate dimensions. What advantage does the TH chipbreaker offer? The TH chipbreaker produces controlled chip formation, improving evacuation and reducing the risk of re-cutting, which supports process reliability. Can this insert be used for internal turning? Yes, the trigon form and 80° included angle make it suitable for both external and internal turning applications when mounted in compatible holders. How does the AH8015 grade affect tool life? AH8015’s coating and substrate composition provide a compromise between wear resistance and edge stability, often resulting in longer useful life under thermal load compared with uncoated grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances wear resistance and edge stability, combined with an 80° WNMG geometry and a 1.6 mm corner radius for versatile turning. Order directly via Metav Werkzeuge or contact the consultants for specification support. WNMG 080416 AH8015 – indexable turning insert by Tungaloy, ISO standard, 80° geometry WNMG080416-TM AH8015 is an ISO-standard triangular indexable insert designed for general turning applications, offering a PVD-coated carbide grade optimised for heat-resistant alloys and stable cutting performance. WNMG geometry, 80° cutting angle PVD-coated carbide AH8015 grade 1.6 mm corner radius for versatile profiles Compatible with ISO turning holders Consistent performance for heat-resistant alloys and general turning The insert delivers a reliable balance between wear resistance and edge stability thanks to the AH8015 PVD-coated carbide grade. This composition is specified for the general machining of heat-resistant alloys, where thermal and mechanical stress demand a robust cutting edge. The TM chipbreaker supports predictable chip formation, reducing downtime related to chip control. For production environments where repeatability and tool life affect cycle times, this geometry provides a measurable benefit: fewer insert changes and steadier part quality over long runs. Geometry and dimensions that ensure repeatable accuracy With an 80° included angle and a 1.6 mm corner radius, the triangular shape produces conservative engagement forces while maintaining the ability to generate defined profiles and transitions. The 4.76 mm plate thickness and the cylindrical locating hole give secure clamping and stable seating in standard ISO-compatible holders. These dimensional details translate directly into machining advantages: improved vibration damping, consistent tool projection, and dependable reference positioning for serial production or toolroom work where dimensional stability matters. System compatibility and application guidance for efficient setup Designed as part of an ISO insert system, the indexable plate requires a matching external holder, shim or clamping kit and replacement screws to complete the assembly. The insert’s designation and tolerance class determine holder compatibility; the WNMG form and the TM chipbreaker suit both external and internal turning when combined with an appropriate holder. Selecting this plate for turning operations supports efficient process planning: one insert family covers multiple workpiece materials and reduces tool inventory complexity while maintaining machining quality. For reliable production results with Tungaloy AH8015 PVD-coated carbide inserts, contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6760688 SKU: 6760688-Tungaloy Manufacturer SKU: TUN6760688 Designation: WNMG080416-TM AH8015 Core specifications Geometry: WNMG (triangular), size 08 Included angle: 80° Corner radius: 1.6 mm Plate thickness: 4.76 mm Clearance angle: 0° Hole: with cylindrical hole Features & applications Material: carbide Coating: PVD-coated (AH8015 grade) Chipbreaker: TM Application: turning (external and internal) ISO-standard turning insert, triangular form System components: requires holder, shim/clamping kit and screws Recommended for machining heat-resistant alloys FAQ What materials is this insert suitable for? The AH8015 PVD-coated carbide insert is intended primarily for the general machining of heat-resistant alloys; the grade balances wear resistance and edge strength for such materials. What is the geometry and how does it affect cutting? The insert features a WNMG triangular form with an 80° included angle and a 1.6 mm corner radius, providing stable engagement and versatility for profile turning and finishing passes. How is the insert secured in the toolholder? The plate has a cylindrical locating hole and requires a matching ISO-compatible holder, a shim or clamping kit, and the appropriate screws for secure mounting and repeatable positioning. What is the role of the TM chipbreaker? The TM chipbreaker promotes controlled chip formation for general turning tasks, improving chip evacuation and reducing the risk of entanglement in a variety of cutting conditions. Which system parts are needed to build a complete tooling setup? A complete system comprises the ISO insert, a compatible external holder or boring bar, an underlay/shim or clamping set, and replacement screws to ensure correct clamping and positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015, the DM chipbreaker and ISO compatibility for consistent productivity and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our team for grade and holder recommendations to optimise turning operations. WNMG 080416 AH8015 — ISO trigon turning insert for turning applications (Tungaloy) The WNMG080416-DM AH8015 is a trigon-shaped, ISO-standard insert designed for external and internal turning, especially suited to machining heat-resistant alloys. ISO-compatible trigon form PVD-coated carbide AH8015 DM chipbreaker for chip control 80° included angle, 1.6 mm radius High-performance grade for heat-resistant alloys The AH8015 grade is a PVD-coated carbide developed as a balanced choice between wear resistance and cutting-edge stability for difficult-to-machine, heat-resistant alloys. This composition provides a robust edge that extends productive cutting time and reduces unscheduled index changes, delivering a clear cost-in-use advantage. The trigon geometry with an 80° included angle ensures a favourable balance between strength and accessibility at the cut, making the insert suitable for both external profiles and internal faces where rigidity and edge life matter. Consistent chip control and process reliability The DM chipbreaker has been engineered to produce short, controllable chips under a range of cutting conditions, improving swarf evacuation and surface finish without compromising edge life. Stable chip formation reduces machine interruptions and cleaning time, directly supporting higher spindle utilisation and lower cycle times. The PVD coating further enhances resistance to built-up edge and abrasive wear, helping to sustain dimensional accuracy over longer tool life and enabling predictable process windows in production environments. ISO system compatibility and practical integration As an ISO-standard turning insert, the WNMG080416-DM is compatible with a broad range of holders and boring bars when matched for form, free angle, tolerance class, fastening method, size and thickness. A complete system approach — insert, matching outer holder or boring bar, clamping pad and replacement screws — ensures secure seating and repeatable performance. Selecting the correct chipbreaker and grade for the workpiece material simplifies setup and reduces trial-and-error, supporting efficient changeover and reliable machining outcomes. Contact Metav Werkzeuge for tailored recommendations on Tungaloy AH8015 turning inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss holder compatibility and batch requirements Technical Data Article number: 6947618 Manufacturer SKU: TUN6947618 Label: WNMG080416-DM AH8015 Model series: ISO turning indexable inserts Application: Turning Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Included angle: 80° Plate thickness: 4.76 mm Plate size: 08 Free angle: 0° Special features PVD-coated carbide grade AH8015 Chipbreaker DM for controlled chips Trigon plate form Cylindrical hole for secure clamping ISO designation WNMG080416-DM Suitable for machining heat-resistant alloys FAQ What materials is the AH8015 grade best suited for? The AH8015 grade is specified as a first choice for general machining of heat-resistant alloys, offering a balanced combination of wear resistance and edge stability for such materials. How does the DM chipbreaker improve productivity? The DM chipbreaker provides reliable short-chip formation, which enhances swarf control and surface finish and reduces interruptions — leading to more consistent cycle times with the WNMG080416-DM insert. Which holders are compatible with this insert? Compatibility depends on matching the insert form, free angle, tolerance class, fastening method, size and thickness; use holders and boring bars designed for ISO WNMG trigon inserts and confirm clamping geometry for secure seating. Is the coating suitable for high-temperature cutting? The PVD coating on AH8015 increases resistance to abrasive wear and built-up edge, supporting machining of heat-resistant alloys where elevated cutting temperatures are encountered. What system components should be checked when fitting the insert? Check the outer holder or boring bar, clamping pad or set, and replacement screws for correct size, tolerance and fastening style to ensure repeatable positioning and secure clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of balanced wear resistance, secure clamping and ISO compatibility for reliable turning operations; order the inserts via Metav Werkzeuge or consult the specialists for application advice. WNMG080416-PM AH8015 (WNMG 080416 AH8015) — Indexable turning insert, 80° trigon, 1.6 mm corner radius — Tungaloy The WNMG080416-PM AH8015 is an ISO‑standard indexable turning insert engineered for external and internal turning of heat‑resistant alloys, offering a durable PVD‑coated cemented carbide grade and a PM chipbreaker for consistent chip control. PVD-coated carbide grade AH8015 PM chipbreaker for general turning 80° trigon shape with 1.6 mm radius Central cylindrical hole for secure clamping Faster, more predictable machining of heat‑resistant alloys The combination of AH8015 grade and PVD coating provides a balance between wear resistance and cutting‑edge stability that suits demanding alloy machining. The cemented carbide substrate resists abrasion at elevated temperatures while the coating reduces built‑up edge, so cycle times become more predictable and surface quality improves. The integrated PM chipbreaker shapes chips reliably in a wide range of turning operations, reducing interruptions caused by poor chip control and supporting higher material removal rates without compromising edge life. Proven fit and secure clamping to reduce setup time Built to ISO standards, the insert's trigon geometry and 80° included angle guarantee compatibility with a broad range of external holders and boring bars when matched by form, clearance angle, tolerance class, fastening and size. The 1.6 mm corner radius and 4.76 mm plate thickness make for robust edge support in interrupted cuts, while the cylindrical hole enables positive, repeatable clamping for accurate positioning. This design lowers setup time and ensures repeatable datum referencing across tool changes, supporting consistent process control on the shop floor. Process stability and cost‑effective tool life Choosing a PVD‑coated cemented carbide insert with a balanced grade such as AH8015 delivers a combination of cutting‑edge durability and economical wear progression. The engineered edge and chipbreaker reduce the frequency of insert changes, which improves overall equipment efficiency and lowers per‑part tooling costs. For operations that demand a compromise between robustness and surface integrity, this insert offers a pragmatic solution that supports continuous production and simplifies grade selection for mixed‑material batches. For application support or to request availability of the Tungaloy AH8015 turning inserts, contact Metav Werkzeuge for tailored advice and fast supply. Technical data Manufacturer's article number: 6947627 SKU: 6947627-Tungaloy Manufacturer SKU: TUN6947627 Product designation: WNMG080416-PM AH8015 Numbers / Core technical data Included angle: 80° Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 08 Chipbreaker: PM Designs / Special features PVD‑coated cemented carbide (grade AH8015) ISO‑standard indexable turning insert Trigon plate form with cylindrical hole Intended for external and internal turning of heat‑resistant alloys FAQ What materials is this insert best suited for? The AH8015 grade with PVD coating is a first choice for machining heat‑resistant alloys, offering balanced wear resistance and edge stability for demanding high‑temperature applications. What advantage does the PM chipbreaker provide? The PM chipbreaker on the WNMG080416‑PM AH8015 promotes consistent chip formation and evacuation in general turning applications, reducing stoppages and improving process stability. Which holder types are compatible with this insert? Compatibility follows ISO conventions: the trigon WNMG form, 80° angle, size 08 and plate thickness 4.76 mm match corresponding ISO WNMG external holders and boring bars when fastening, tolerance class and clearance angle are aligned. What are the key dimensions for clamping and edge support? The insert provides a 1.6 mm corner radius, 4.76 mm plate thickness and a central cylindrical hole for secure clamping, suitable for interrupted cuts and repeatable positioning. How does the coating influence tool life? The PVD coating reduces friction and resists thermal degradation at the cutting edge, extending effective tool life while maintaining surface finish and dimensional stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080416 AH8015 Wendeplatten - Tungaloy
Take advantage of the durable PVD-coated AH8015 grade for a balanced combination of wear resistance and cutting-edge stability, paired with the WNMG080416-ZM geometry and 1.6 mm corner radius to deliver consistent results in external and internal turning operations; order the inserts directly via Metav Werkzeuge or consult our experts for material-specific recommendations. WNMG 080416 AH8015 – ISO turning insert for trigon holders, 1.6 mm radius, by Tungaloy A WNMG080416-ZM AH8015 indexable insert designed for general-purpose turning of heat-resistant alloys, offering a trigon form and secure cylindrical-hole mounting for ISO-compatible holders. PVD-coated carbide grade AH8015 Trigon form WNMG with 80° included angle 1.6 mm corner radius for robust edge Cylindrical hole for secure mounting Reliability for routine turning of heat-resistant alloys The PVD-coated AH8015 carbide composition provides a reliable compromise between wear resistance and edge stability, making it a sound choice for the general machining of heat-resistant alloys. The PVD layer improves thermal resistance and adhesion of the coating, which reduces flank wear under intermittent heat loads. In practical terms, this means longer life between indexings and fewer unexpected interruptions on the shop floor. Clear, measurable properties such as cutting-edge robustness and coating behaviour support predictable cycle planning and tool-change intervals. Consistent clamping and geometry for repeatable performance A trigon-shaped ISO insert with an 80° included angle and 1.6 mm corner radius combines edge strength with acceptable surface finish for many external and internal turning tasks. The 0° clearance specification and the cylindrical hole ensure positive seating and compatibility with a wide range of holders; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert is intended to form a complete system with an external holder or boring bar, a shim/clamp set and replacement screws, which together ensure reliable repeatability and safe clamping under varying cutting forces. Stable chip control and reduced process variability The ZM chipbreaker geometry is matched to the grade to promote stable chip formation across differing workpiece materials and levels of rigidity. Controlled chips help maintain consistent tool life and reduce the risk of built-up edge or surface damage, which in turn lowers rework rates and contributes to a more economical machining process. When paired with the appropriate holder and cutting parameters, the insert supports steady productivity and facilitates process documentation for quality management and reproducibility. Contact Metav Werkzeuge for tailored selection and application support of Tungaloy turning inserts via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical advice Technical data Article number: 6947593 SKU: 6947593-Tungaloy Manufacturer SKU: TUN6947593 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: AH8015 Chipbreaker: ZM Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Size designation: 08 ISO code: 080416 Special features PVD-coated carbide Trigon plate form (WNMG) With cylindrical hole (secure mounting) Chipbreaker: ZM for controlled chips Compatible with ISO trigon holders and boring bars System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert intended for? The AH8015 grade of this insert is optimised for the general machining of heat-resistant alloys while also offering balanced performance on a broad range of steels and alloyed materials. How does the PVD coating improve performance? The PVD coating on the AH8015 substrate increases thermal resistance and coating adhesion, which in practical terms reduces wear rates and extends usable life before reindexing. Which holders are compatible with this trigon insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fixing method, size and thickness; the WNMG080416 geometry is compatible with ISO trigon external holders and appropriate boring bars. What advantages does the 1.6 mm corner radius provide? A 1.6 mm corner radius increases edge strength and resistance to chipping while maintaining a surface finish suited to many general turning tasks. Is this insert supplied as a complete system? The insert forms part of a system that typically includes a matching external holder or boring bar, a shim/clamp set and replacement screws to ensure secure mounting and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T505 Wendeplatten - Tungaloy
WNMG080416 T505 Drehwendeschneidplatte Drehen von Tungaloy Die WNMG080416 T505 ist eine ISO-genormte Drehwendeschneidplatte, entwickelt für die wirtschaftliche Bearbeitung von Gusseisen beim Außen- und Innendrehen. CVD-beschichtetes Hartmetall T505 für Gusseisen Trigon-Form mit 80° Einspannwinkel Doppelseitiger Spanbrecher für stabile Spanbildung Zylindrisches Loch, einfache Befestigung am Halter Eckenradius 1,6 mm für präzise Konturen Effiziente Bearbeitung von Gusseisen durch optimierte Sorte Die Kombination aus T505 Sorte und CVD-Beschichtung macht diese Wendeschneidplatte zu einer wirtschaftlichen Lösung für das Drehen von Gusseisen. Durch die auf Abrieb ausgelegte Beschichtung und die robuste Hartmetall-Substanz reduziert sich der Verschleiß bei langen Schnittlängen, was die Standzeit erhöht und Stillstandszeiten verringert. Daraus resultiert eine spürbare Produktivitätssteigerung in der Serienfertigung. Passgenauigkeit und Einbaubedingungen für sichere Prozesse Für eine zuverlässige Funktion ist die ISO-Kompatibilität entscheidend: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke müssen zum Halter passen. Die trigonförmige Platte mit 80° Einspannwinkel und zylindrischem Loch erlaubt eine stabile Montage an Standardaußenhaltern. Anwender profitieren von einfacher Handhabung und reproduzierbarer Einspannung, wodurch Rüstzeiten verkürzt und Prozesssicherheit erhöht werden. Aufbau, Spanformer und Konturgenauigkeit Der doppelseitige Spanbrecher wurde für kontrollierte Spanbildung bei unterbrochenem Schnitt ausgelegt und unterstützt konstante Oberflächenqualität. Der Eckenradius von 1,6 mm liefert präzise Konturen bei Außen- und Innendreharbeiten. Solche Eigenschaften reduzieren Nachbearbeitungsschritte und sichern gleichbleibende Bauteilqualität im Fertigungsprozess. Material- und Herstellervorteile für die Produktionspraxis Als CVD-beschichtete Hartmetall-Platte ist die WNMG080416 T505 auf robuste Zerspanung ausgelegt und bietet breite Werkstoffabdeckung bei besonderer Eignung für Gusseisen. Die ISO-Normierung erleichtert die Integration in bestehende Werkzeugaufbauten und macht die Platte zur wirtschaftlichen Wahl für produzierende Unternehmen, die Wert auf konstante Ergebnisse legen. Bestellen Sie die WNMG080416 T505 bei Metav Werkzeuge oder kontaktieren Sie unsere Anwendungstechnik per eMail: info@metav-werkzeuge.com bzw. Telefon: +49 2822 7131930, um die passende Sorten- und Spanbrecherkombination für Ihre Anwendung zu wählen. Produktmerkmale Artikelnummer: 6831777 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6831777 Fakten Eckenradius: 1,6 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet Sorte: T505 (für Gusseisen, wirtschaftliche Bearbeitung) Plattenform: trigon Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Kompatibilität: ISO-genormt; Form, Freiwinkel und Toleranzklasse beachten FAQ Ist die WNMG080416 T505 für unterbrochenen Schnitt geeignet? Die WNMG080416 T505 von Tungaloy ist durch den doppelseitigen Spanbrecher und die CVD-Beschichtung für unterbrochene Schnitte bei Gusseisen geeignet und bietet stabile Spanbildung und verlängerte Standzeiten. Welchen Werkstoff deckt die Sorte T505 ab? Die Sorte T505 wurde von Tungaloy gezielt für die wirtschaftliche Bearbeitung von Gusseisen entwickelt; die Platte WNMG080416 T505 liefert dabei eine gute Kombination aus Abriebfestigkeit und Zerspanungsleistung. Welche Rolle spielt der Eckenradius 1,6 mm in der Praxis? Der Eckenradius 1,6 mm sorgt für präzise Konturen und ermöglicht reproduzierbare Formtreue bei Außen- und Innendreharbeiten, wodurch Nacharbeit reduziert wird. Wie lässt sich die WNMG080416 T505 am Halter befestigen? Die Wendeschneidplatte verfügt über ein zylindrisches Loch und ist für die Montage an ISO-kompatiblen Trigon-Außenhaltern vorgesehen; Form, Freiwinkel und Toleranzklasse des Halters müssen passen. Welche Vorteile bietet die CVD-Beschichtung? Die CVD-Beschichtung der WNMG080416 T505 erhöht die Verschleißfestigkeit bei abrasiven Gusseisen-Werkstoffen und trägt zu gleichmäßigeren Standzeiten und konstanten Oberflächengüten bei. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T515 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade designed for economic machining of cast iron together with a trigon geometry that ensures secure clamping and predictable chip control; order the insert directly via Metav Werkzeuge or request technical consultation for optimal holder pairing and process parameters. WNMG 080416 T515 indexable insert for turning — trigon, CVD-coated carbide, Tungaloy The WNMG080416-TH T515 is an ISO-standard trigon indexable insert for external and internal turning, engineered for efficient machining of cast iron with a dedicated TH chipbreaker and a robust CVD coating. ISO-standard trigon insert for turning CVD-coated carbide grade T515 Chipbreaker TH for cast iron machining Corner radius 1.6 mm, 80° main cutting edge Reliable economy for cast iron turning with long tool life With a CVD-coated carbide substrate and the T515 grade, the insert targets economic machining of cast iron while maintaining a predictable cutting behaviour. The applied coating enhances resistance to built-up edge and abrasion, which contributes to stable chip formation and extended tool life in continuous production. For manufacturers seeking consistent part quality and reduced index-change frequency, the insert delivers measurable process stability without sacrificing productivity. Precise geometry and ISO compatibility for secure clamping The trigon geometry combined with an 80° main cutting-edge angle and a corner radius 1.6 mm provides a balance between strength and edge engagement suitable for medium-duty turning. As an ISO-standard component, compatibility with a holder depends on shape, clearance angle, tolerance class, clamping method, size and thickness; the insert’s 0° clearance angle and cylindrical locating hole support repeatable positioning and robust mechanical clamping. Specifying the correct holder and clamping set ensures repeatable results and helps avoid vibrations that shorten tool life. Practical process guidance to improve productivity and surface quality The TH chipbreaker is optimised for stable chip control when machining cast iron under steady cutting conditions; it performs particularly well with moderate feeds and cutting speeds adjusted to the workpiece stability. When facing interrupted cuts or less rigid setups, selecting a chipbreaker and cutting data that favour edge strength will reduce the risk of edge chipping. The insert forms part of an insert–holder–clamp system that includes an appropriate backing pad and replacement screws to maintain consistent seating and torque transmission; this system view supports predictable surface finish and machining economy. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy inserts into existing turning systems or to request holder compatibility checks and cutting-data recommendations from our technical consultants at Metav Werkzeuge Technical Data Article number: 6793696 Manufacturer SKU: TUN6793696 SKU: 6793696-Tungaloy Brand: Tungaloy Product code: WNMG080416-TH T515 Numbers / Facts Corner radius: 1.6 mm Main cutting-edge angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Size: 08 Designs / Special features Trigon plate form CVD-coated carbide grade T515 Chipbreaker: TH Cylindrical locating hole ISO-standard insert for turning Intended use: external and internal turning of cast iron System components: insert, holder, backing pad/clamp set, replacement screws FAQ What materials is this insert suited for? The WNMG080416-TH T515 insert is specified for the economic machining of cast iron; the T515 grade and TH chipbreaker are chosen to ensure stable chip control and good wear resistance when working with cast iron workpieces. How does the trigon shape affect mounting and cutting? Trigon geometry provides strong indexability and a larger contact area for clamping; the trigon form of the WNMG insert combined with the cylindrical locating hole ensures secure seating in compatible holders, reducing vibration and improving repeatability. Which components are required to form a complete system? A complete system comprises the indexable insert, a compatible external holder or boring bar, a backing pad/clamp set and the correct replacement screws; matching these components to the insert’s dimensions and tolerance class is essential for safe and repeatable machining. Is the insert suitable for interrupted cuts or unstable setups? The T515 grade is optimised for cast iron and steady cutting conditions; in interrupted cuts or less rigid setups, selecting a more robust chipbreaker or adjusting cutting parameters improves edge strength and reduces the likelihood of chipping when using the WNMG080416-TH T515. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T515 Wendeplatten - Tungaloy
WNMG080416 T515 ISO-Drehwendeschneidplatte für Drehen — Tungaloy Die WNMG080416 T515 ist eine ISO-genormte Wendeschneidplatte für die wirtschaftliche Außen- und Innendrehung von Gusseisen und verwandten Werkstoffen Wirtschaftliche Sorte T515 für Gusseisen CVD-Beschichtung erhöht Verschleißfestigkeit Trigonform mit 80° Winkel für stabile Schnitte Doppelseitiger Spanbrecher, zylindrisches Loch Produktivität durch optimierte Schneidstoffwahl Die Kombination aus T515-Sorte und CVD-Beschichtung sorgt für langlebige Schneidkante bei der Bearbeitung von Gusseisen. Durch die speziell abgestimmte Werkstoffzusammensetzung des Hartmetalls lassen sich Schnittgeschwindigkeiten ökonomisch wählen, wodurch Rüstintervalle länger und Standzeiten höher werden. Dies reduziert die Teilekosten in der Serienfertigung. Geometrie für sichere Spanbildung und Prozessstabilität Die trigon-Plattenform mit 80° Einfallwinkel und einem Eckenradius 1.6 mm sorgt für stabile Spanabfuhr und gleichmäßige Belastung der Schneidkante. Der doppelseitig ausgelegte Spanbrecher ermöglicht beidseitiges Indexieren und trägt zur wirtschaftlichen Nutzung der Platte bei. Die Kompatibilität mit Haltern richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Einsetzbar in standardisierten Systemen und für vielfältige Anwendungen Die Platte ist Teil der ISO-Drehwendeschneidplatten- Modellserie und eignet sich für Außen- sowie Innendrehen. Der Systemaufbau umfasst die ISO-Drehplatte, einen passenden Außenhalter oder eine Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben. Damit ist die Integration in bestehende Werkzeugaufnahmen und CNC-Prozesse unkompliziert möglich und reduziert Stillstandzeiten. Materialeigenschaften, Handhabung und Wirtschaftlichkeit Gefertigt aus robustem Hartmetall mit einer Plattendicke von 4,76 mm bietet die Wendeplatte eine ausgewogene Kombination aus Stabilität und Wiederverwendbarkeit. Das zylindrische Loch erleichtert die sichere Befestigung, die trigonale Geometrie ermöglicht kompakte Werkzeugaufbauten. Für Anwender in Lohnfertigung und Serienproduktion ergibt sich ein deutlicher Effizienzgewinn bei stabilen Bearbeitungsbedingungen. Empfehlung: Die Tungaloy Wendeplatte in T515 für wirtschaftliche Gussbearbeitung kaufen oder technische Beratung über Metav Werkzeuge anfordern — E-Mail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6733842 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6733842 Daten Plattengröße: 08 Eckenradius: 1.6 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Besonderheiten Sorte: T515 Schneidstofftyp: CVD-beschichtetes Hartmetall (chemisch gasphasenbeschichtet) Plattenform: trigon Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen FAQ Für welche Werkstoffe ist die WNMG080416 T515 besonders geeignet? Die WNMG080416 T515 von Tungaloy ist speziell für die wirtschaftliche Bearbeitung von Gusseisen ausgelegt; die T515-Sorte bietet hierfür stabile Spanbildung und gute Verschleißfestigkeit. Wie beeinflusst die CVD-Beschichtung die Standzeit? Die CVD-Beschichtung auf der Tungaloy Wendeplatte verbessert die Verschleißfestigkeit der Hartmetallschneide, was in der Praxis zu längeren Standzeiten und geringeren Werkzeugkosten führt. Welche Vorteile bietet die trigonale Form bei dieser Wendeschneidplatte? Die trigonale Geometrie kombiniert kompakten Aufsatz mit einem 80° Einfallwinkel, was die Prozessstabilität beim Außen- und Innendrehen erhöht und eine sichere Spanabfuhr unterstützt. Ist die Platte beidseitig nutzbar und wie wird sie befestigt? Ja, die WNMG080416 T515 verfügt über einen doppelseitigen Spanbrecher und wird über das zylindrische Loch sicher auf dem passenden Halter montiert; Form, Freiwinkel und Toleranzklasse bestimmen die Halterkompatibilität. Für welche Anwender ist die WNMG080416 T515 besonders empfehlenswert? Die Platte richtet sich an CNC-Betriebe, Lohnfertiger und Produktionswerkstätten, die eine wirtschaftliche und reproduzierbare Lösung für Gussbearbeitung suchen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T515 Wendeplatten - Tungaloy
Benefit from economical cast-iron machining, a CVD-coated carbide grade for reliable wear resistance and a precise 1.6 mm corner radius that supports consistent part quality; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080416-TM T515 — ISO trigon turning insert, CVD-coated carbide, 1.6 mm radius (Tungaloy) The WNMG080416-TM T515 is an ISO trigon insert designed for efficient external and internal turning, optimised for the economic machining of cast iron in production and job-shop environments. ISO trigon insert for turning applications CVD-coated carbide grade T515 Cylindrical hole for secure clamping Increased productivity when machining cast iron The combination of the T515 specification and a CVD-coated carbide substrate promotes stable cutting conditions and extended tool life when processing cast iron. The coating enhances wear resistance and heat tolerance, which translates into longer uninterrupted runs and fewer indexings. For production-oriented turning where cycle time and predictability matter, this grade is tuned to deliver a favourable balance of economy and performance while maintaining surface finish and dimensional stability. Predictable clamping and geometry for repeatable results A trigon profile with an included 80° angle and 0° clearance gives a defined tool–workpiece interaction that supports consistent cutting forces. The insert’s 1.6 mm radius and 4.76 mm thickness contribute to rigidity and edge strength, while the cylindrical hole ensures secure fastening in ISO-compatible toolholders. Clear, standardised geometry reduces setup variation: compatibility depends on insert form, clearance, tolerance class, clamping method, size and thickness, so holders and clamping sets should be selected accordingly to achieve repeatable outcomes. System integration and selection guidance for reliable results This ISO insert integrates into a classic turning system comprising an ISO indexable insert, a suitable external holder or boring bar, backing/clamp sets and replacement screws. The chipbreaker TM is intended for interrupted and stable cuts; matching chipbreaker and grade to workpiece material and fixturing stability yields the best economy. Where process security and surface quality are critical, pair the insert with a toolholder that meets the dimensional tolerance and clamping requirements, and follow tool‑maker guidelines for maximum benefit. The WNMG080416-TM T515 therefore offers a balance of productivity, robustness and process reliability for turning applications. Contact Metav Werkzeuge for tailored recommendations on Tungaloy grade T515 inserts and to arrange procurement or technical consultation via Metav Werkzeuge. Technical data Article number: 6760685 SKU: 6760685-Tungaloy Manufacturer SKU: TUN6760685 Material: Hartmetall (carbide) Coating: CVD-coated (T515) Key figures Corner radius: 1.6 mm Insert thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Size: 08 Features Trigon insert form Cylindrical hole Chipbreaker TM Grade T515 for cast iron ISO-compatible turning insert Application: turning (external and internal) FAQ What materials is this insert suited for? The WNMG080416-TM T515 from Tungaloy is specified for the economic machining of cast iron and performs well in turning operations where stable chip formation is required. How does the chipbreaker TM affect performance? The chipbreaker TM on the insert controls chip formation for interrupted and steady cuts; when combined with the T515 grade it supports reliable machining and reduced risk of edge damage. Which holder characteristics determine compatibility? Compatibility with the insert depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the cylindrical hole and trigon shape require an ISO-compatible clamping system. Is the edge geometry suitable for finishing operations? With a 1.6 mm radius and 80° included angle, the insert provides edge strength for stable cutting and can achieve good surface quality when cutting parameters and holder rigidity are appropriate. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning; select an appropriate boring bar or internal holder that matches the insert dimensions and clamping style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T6215 Wendeplatten - Tungaloy
WNMG 080416 T6215 Drehwendeschneidplatten für Drehen, Tungaloy Die WNMG 080416 T6215 Drehwendeschneidplatte ist eine ISO-genormte Trigon-Platte für das Außen‑ und Innendrehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Schnittbedingungen WNMG080416-ZM T6215 von Tungaloy CVD-beschichtetes Hartmetall für hohe Verschleißfestigkeit Trigon‑Platte mit 4,76 mm Plattendicke Mit zylindrischem Loch und 0° Freiwinkel Eckenradius 1,6 mm für feine Oberflächen Hohe Verschleißfestigkeit für konstante Zerspanung Die Kombination aus Hartmetall und CVD‑Beschichtung sorgt für eine deutlich verbesserte Standzeit beim Drehen von rostfreiem Stahl. Durch die Beschichtung reduziert sich der Verschleiß an der Schneidkante, was zu längeren Einsatzintervallen und geringeren Ausfallzeiten führt. Anwender profitieren von stabilen Spanbildungen und besserer Prozesssicherheit bei gleichbleibender Fertigungsqualität. Optimiert für rostfreie Stähle und stabile Schnitte Speziell für das Bearbeiten von rostfreiem Stahl ausgelegt, eignet sich die Platte für Außen‑ und Innendrehen, wenn eine ruhige Schnittführung gewährleistet ist. Die Geometrie mit Spanbrecher ZM liefert kurze, kontrollierte Späne und unterstützt damit eine sichere Spanabfuhr. Dies reduziert Werkzeugwechsel und erhöht die Produktivität bei Serien‑ und Einzelbearbeitung gleichermaßen. Einfache Integration in bestehende Haltersysteme Die ISO‑Normierung sowie die Angaben zu Form, Freiwinkel, Toleranz und Befestigung machen die Einpassung in gängige Halter unkompliziert. Die Trigon‑Form sowie das zylindrische Loch erleichtern die Fixierung, und die Plattendicke von 4,76 mm bietet genug Stabilität für präzise Schnitte. So lässt sich die Wendeschneidplatte reibungslos in vorhandene Werkzeugaufbauten integrieren. Die Tungaloy WNMG080416-ZM T6215 empfiehlt sich für Fertigungsbetriebe, die bei der Bearbeitung rostfreier Stähle auf Prozesssicherheit und Wirtschaftlichkeit setzen; technische Beratung und Bestellung über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6945139 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-ZM T6215 Hersteller SKU: TUN6945139 Fakten Eckenradius: 1,6 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: CVD (chemische Gasphasenabscheidung) Sorte: T6215 Spanbrecher: ZM (spanformoptimiert für kurze Späne) Plattenform: Trigon Lochstil: zylindrisches Loch Freiwinkel: 0° Einsatz: Drehen von rostfreiem Stahl FAQ Für welche Anwendungen ist die WNMG080416-ZM T6215 besonders geeignet? Die WNMG080416-ZM T6215 von Tungaloy ist besonders geeignet für das Außen‑ und Innendrehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Schnittbedingungen; die CVD‑Beschichtung verbessert die Standzeit. Welche Vorteile bietet die CVD‑Beschichtung bei dieser Wendeschneidplatte? Die CVD‑Beschichtung der Tungaloy WNMG080416-ZM T6215 erhöht die Verschleißfestigkeit und schützt die Schneidkante, was zu längeren Werkzeugstandzeiten und konstanteren Oberflächen führt. Wie beeinflusst der Eckenradius 1,6 mm die Oberfläche? Der Eckenradius 1,6 mm erzeugt feine Oberflächen bei stabiler Schnittführung und reduziert die Bildung spitzer Kanten, was Nachbearbeitungsaufwand minimiert. Ist die Platte kompatibel mit gängigen ISO‑Haltern? Ja, die ISO‑Normierung und die Angaben zu Form, Befestigung und Plattendicke erlauben die Montage in üblichen Außenhaltern und Bohrstangen; auf passende Toleranzklasse und Unterlage achten. Welche Späneigenschaften liefert der Spanbrecher ZM? Der Spanbrecher ZM ist auf kurze, kontrollierte Späne ausgelegt und verbessert die Spanabfuhr bei rostfreiem Stahl, wodurch die Prozessstabilität erhöht wird. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T6215 Wendeplatten - Tungaloy
WNMG 080416 T6215 Drehen — Tungaloy WNMG080416-TM T6215 ist eine ISO-genormte Wendeschneidplatte für das Außen- und Innendrehen, entwickelt für verschleißarme Bearbeitung von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen Hohe Verschleißfestigkeit bei rostfreiem Stahl CVD-beschichtetes Hartmetall für lange Standzeit Trigon-Form für stabile Schneidkanten Mit zylindrischem Loch für sichere Spannbefestigung Freiwinkel 0° für stabile Spanbildung Präzise Schneidstofftechnologie für dauerhafte Performance Die Wendeschneidplatte basiert auf Hartmetall mit CVD-Beschichtung und der Sorte T6215, was eine gezielte Kombination aus Verschleißfestigkeit und Zähigkeit liefert. Diese Eigenschaft reduziert Werkzeugwechsel und Stillstandszeiten und verbessert die Wirtschaftlichkeit in der Fertigung. Durch die trigonale Form und den definierten Eckenradius entsteht eine belastbare Schneidkante, die gerade bei rostfreiem Stahl für konstante Ergebnisse sorgt. Effiziente Anwendung beim Außen- und Innendrehen Für das Drehen von Werkstücken bietet die Platte eine robuste Lösung: der Spanbrecher TM unterstützt eine kontrollierte Spanform, die Schnittkräfte reduziert und die Oberflächenqualität stabilisiert. In Verbindung mit passenden Außenhaltern und Klemmsätzen ermöglicht die Platte reproduzierbare Bearbeitungsergebnisse. Die Kombination aus Form, Freiwinkel und Toleranzklasse bestimmt die Kompatibilität zum Halter und vereinfacht die Auswahl im Betrieb. Kompatibilität, Montage und Prozesssicherheit Die Wendeplatte ist ausgelegt für standardisierte ISO-Halteraufnahmen; das zylindrische Loch gewährleistet sichere Befestigung und einfache Montage. Durch den Freiwinkel von 0° wird eine neutrale Schnittgeometrie erreicht, die Stabilität bei leichten Unterbrechungen bietet. Anwender profitieren von klaren Einbaubedingungen und reduziertem Nachjustierungsaufwand, was die Prozesssicherheit erhöht und Ausschuss reduziert. Zielgruppe, Nutzen und Wirtschaftlichkeit Konzipiert für anspruchsvolle Metallbearbeitung, richtet sich die Platte an Lohnfertiger, Maschinenbauer und Produktionsbetriebe mit hoher Anforderung an Standzeit und Oberflächengüte. Die Sorte T6215 ist speziell für rostfreien Stahl optimiert und reduziert Gesamtkosten durch verlängerte Lebensdauer und geringeren Werkzeugverbrauch. Dadurch rentiert sich die Investition besonders bei Serienfertigung und wiederkehrenden Chargen. Empfehlung: Die WNMG080416-TM mit Sorte T6215 von Tungaloy bietet eine wirtschaftliche und verlässliche Lösung für das Drehen von rostfreiem Stahl — Für Beratung und Bestellung wenden Sie sich an Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 6903066 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-TM T6215 Hersteller SKU: TUN6903066 Fakten Eckenradius: 1,6 mm Plattendicke: 4,76 mm Winkel: 80° Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T6215 (verschleißfest, für rostfreien Stahl) Spanbrecher: TM (optimierte Spanform für stabile Spanbildung) Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: trigon Freiwinkel: 0° Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten SKU: 6903066-Tungaloy Hersteller Artikelnummer: 6903066 FAQ Welche Werkstoffe sind mit der Platte geeignet? Die Platte ist für rostfreien Stahl ausgelegt; die Sorte T6215 und die CVD-Beschichtung optimieren die Standzeit und die Spanbildung bei solchen Werkstoffen. Die WNMG080416-TM T6215 von Tungaloy liefert hier konstante Ergebnisse. Welche Vorteile bietet der Spanbrecher TM? Der Spanbrecher TM formt die Späne kontrolliert und reduziert Aufbauschneiden sowie Vibrationen, was zu besserer Oberflächengüte und längerer Werkzeugstandzeit bei der WNMG080416-TM führt. Wie wird die Platte montiert und befestigt? Die Platte verfügt über ein zylindrisches Loch zur sicheren Befestigung in ISO-konformen Außenhaltern; Form, Freiwinkel und Toleranzklasse bestimmen die Halterkompatibilität. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T9215 Wendeplatten - Tungaloy
WNMG080416-TM T9215 — ISO-Drehwendeschneidplatte für Drehen (Tungaloy) Die WNMG080416-TM T9215 ist eine CVD-beschichtete Wendeschneidplatte für produktives Drehen in der mittleren Stahlbearbeitung. CVD-beschichtetes Hartmetall für hohe Standzeit Trigonform: stabile Schneidkante und drei Nutzflächen Eckenradius 1,6 mm für robuste Kanten Mit zylindrischem Loch für einfache Befestigung Optimiert für mittlere Stahlbearbeitung Hohe Produktivität durch verschleißfesten Schneidstoff Die WNMG080416-TM T9215 basiert auf CVD-beschichtetem Hartmetall, das hohen Verschleißwiderstand mit guter Bruchsicherheit kombiniert. Dadurch ergibt sich eine längere Werkzeugstandzeit und weniger Stillstand in der Fertigung. Für Serien- und Schruppprozesse bietet die Sorte T9215 konstante Leistungen bei kontinuierlichem bis leicht unterbrochenem Schnitt, was die Produktivität im Betrieb nachhaltig erhöht. Präzision und Stabilität bei Außen- und Innendrehen Dank der Trigonform und des 80° Winkels resultiert eine besonders stabile Auflage am Werkstück, die Vibrationen reduziert und die Schneidkantentragfähigkeit verbessert. Der Eckenradius 1,6 mm sorgt für sichere Kantentragfähigkeit bei robusten Schnittbedingungen. Die Platte ist ISO-genormt und die Kompatibilität zu Haltern wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke gewährleistet, sodass ein sicherer Sitz und reproduzierbare Ergebnisse möglich sind. Praxisorientierte Merkmale und Anwendernutzen Der Spanbrecher TM ist für mittlere Schnittbedingungen ausgelegt und unterstützt eine kontrollierte Spanbildung, die Spanstauung verhindert und die Oberflächengüte verbessert. Die Ausführung mit zylindrischem Loch vereinfacht die Montage an Standardhaltern und erhöht die Wiederholgenauigkeit beim Plattenwechsel. Anwender in Serienfertigung und Instandhaltung profitieren von der Kombination aus Standzeit, Stabilität und einfacher Handhabung. Empfehlung: Für produktive Drehprozesse die WNMG080416-TM T9215 von Tungaloy über Metav Werkzeuge wählen oder unsere Anwendungstechnik unter info@metav-werkzeuge.com / +49 2822 7131930 kontaktieren für eine individuelle Auswahl und Schnittdatenempfehlung Produktmerkmale Artikelnummer: 6772402 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-TM Hersteller SKU: TUN6772402 Fakten Eckenradius: 1,6 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 Spanbrecher: TM (universeller Spanformer für mittlere Schnitte) Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: trigon Anwendung: Drehen Einsatz: mittlere Stahlbearbeitung FAQ Für welche Werkstoffe ist die WNMG080416-TM T9215 geeignet? Die WNMG080416-TM T9215 von Tungaloy ist speziell für die mittlere Stahlbearbeitung ausgelegt; durch die CVD-Beschichtung bietet die Platte gute Leistungen bei Standard- und legierten Stählen. Wie beeinflusst die Sorte T9215 die Werkzeugstandzeit? Die Sorte T9215 kombiniert hohen Verschleißwiderstand mit Bruchsicherheit, wodurch die Standzeit im Vergleich zu unbeschichteten Platten deutlich verlängert wird und weniger Wechsel erforderlich sind. Welche Vorteile bringt der Spanbrecher TM? Der Spanbrecher TM sorgt für kontrollierte Spanbildung bei mittleren Schnitten, reduziert Spanstauung und trägt so zu konstanter Oberflächengüte und stabilen Bearbeitungsbedingungen bei. Ist die WNMG080416-TM T9215 mit gängigen Außenhaltern kompatibel? Ja, die ISO-Genormung gewährleistet Kompatibilität zu Haltern, wenn Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen; bei Unsicherheit Halterdaten vergleichen. Welche Montagevorteile bietet das zylindrische Loch? Das zylindrische Loch erleichtert die präzise Fixierung der Platte und erhöht die Wiederholgenauigkeit beim Plattenwechsel, was gerade in Serie Zeit spart. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 and a 1.6 mm corner radius for predictable, high-productivity turning in medium steels; reliable chip control and fracture resistance reduce downtime. Order the inserts directly via Metav Werkzeuge or contact our consultants for machining advice. WNMG 080416 T9215 WNMG080416-THS T9215 — ISO turning insert, 1.6 mm radius, 80° The WNMG080416-THS T9215 is an ISO‑format trigon insert designed for general turning applications and engineered for productive machining of medium steels. ISO trigon insert WNMG 08 format CVD‑coated carbide grade T9215 Optimised THS chipbreaker for steel Cylindrical hole for secure mounting Faster, more consistent results with CVD‑coated carbide The CVD‑coated carbide composition and T9215 grade combine high wear resistance with improved fracture toughness, making this insert a solid choice for continuous to lightly interrupted cuts in medium steel. The material pairing extends usable tool life under stable cutting conditions and reduces the frequency of tool changes, which supports higher overall productivity on batch and serial turning operations. Geometry that stabilises cutting and improves surface finish The trigon shape with an 80° approach angle and 1.6 mm corner radius provides a robust cutting edge for external and internal turning. The 0° clearance angle and a plate thickness of 4.76 mm contribute to rigidity at the cutting zone; the result is less vibration and a more consistent surface quality. These geometric parameters support predictable chip flow and help maintain dimensional accuracy across repeat runs. Simple integration into ISO tool systems As an ISO turning insert, compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening type, size and thickness. The central cylindrical hole and standard WNMG 08 format allow quick indexing and secure clamping in matching holders or boring bars. A complete system typically consists of the insert, a matched external holder or boring bar, a shim or clamping set and replacement screws, which together enable fast changeovers and reduced setup time. Application focus and operational benefits Equipped with the THS chipbreaker, this insert promotes stable chip formation when machining medium steel, supporting safer swarf evacuation and steady cutting forces. The overall design aims at high productivity: longer uninterrupted cutting periods, fewer insert changes and steady component quality. For operations seeking a balance between tool life and reliability, this carbide grade and geometry present an effective, economical choice. Contact Metav Werkzeuge for tailored application recommendations on Tungaloy turning inserts or request the technical datasheet via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774120 SKU: 6774120-Tungaloy Manufacturer SKU: TUN6774120 Facts Corner radius: 1.6 mm Approach angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 08 Special features Grade: T9215 Cutting material: CVD‑coated carbide Chipbreaker: THS Plate form: trigon Hole style: cylindrical hole Typical application: turning (external and internal) System: ISO turning insert requiring matching holder, shim/clamp and screws FAQ What machining tasks is this insert intended for? This insert is intended for turning applications, both external and internal, and is specified for productive machining of medium steels using ISO tool systems. Which materials does the grade T9215 suit best? The T9215 grade is the recommended choice for medium‑strength steels, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. How does the THS chipbreaker influence performance? The THS chipbreaker is optimised for steel machining and promotes stable chip formation, improving swarf control and reducing the risk of surface defects during turning. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions and requires a matching holder that corresponds to its form, clearance angle, tolerance class, fastening method, size and thickness. What components complete the working system for this insert? A typical working system comprises the ISO insert, a suitable external holder or boring bar, an underlay or clamping set and replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for high wear resistance and reliable edge stability in medium-steel turning; the DM chipbreaker and ISO compatibility ensure stable chip control and efficient production. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080416 T9215 ISO turning insert for medium-steel turning — Tungaloy The WNMG080416-DM T9215 is an ISO-format trigonal turning insert engineered for external and internal turning, combining a CVD-coated carbide grade with a DM chipbreaker for productive, continuous to slightly interrupted cuts. CVD-coated carbide T9215 Suitable for medium steel machining DM chipbreaker for stable chips 80° trigonal form with 1.6 mm radius Enhanced productivity through material and grade selection The main benefit of the T9215 grade is its blend of wear resistance and fracture toughness, designed specifically for the demands of medium-steel machining. The CVD-coated surface reduces abrasive wear while preserving edge strength, which directly translates into longer tool life and fewer tool changes. For operations running continuous or lightly interrupted cuts, this combination supports higher throughput and predictable tool performance, helping to lower cycle times and increase output. Stable chip control and secure edge integrity The DM chipbreaker geometry delivers dependable chip control, reducing the risk of entanglement and improving evacuation in both external and internal turning. The trigonal shape with an 80° approach angle and a 1.6 mm corner radius provides a balance between strength and profile fidelity, permitting efficient material removal while maintaining surface finish. These characteristics reduce rework and contribute to consistent part quality in production batches. Easy integration into ISO tool systems for rapid setup Designed to ISO specifications, the insert is compatible with standard holders and boring bars when matched by form, clearance angle, tolerance class, fastening method, size and thickness. The recommended system setup comprises the ISO turning insert, a suitable external holder or boring bar, a shim/locking kit and spare screws, enabling fast replacement and minimal downtime. Clear identification such as the ISO designation and grade simplifies inventory management and ensures the correct selection for a given machining task. For detailed compatibility checks, application advice or to request this Tungaloy WNMG080416-DM T9215 directly, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6945162-Tungaloy Manufacturer SKU: TUN6945162 Manufacturer article number: 6945162 Label: WNMG080416-DM T9215 Key figures Corner radius: 1.6 mm Thickness: 4.76 mm Insert size: 08 Insert angle: 80° ISO code: 080416 Design & application Material: carbide Coating/grade: CVD-coated, T9215 Chipbreaker: DM Shape: trigonal Hole: cylindrical Application: turning (external and internal) System components: ISO insert, holder/boring bar, shim/locking kit, replacement screws FAQ What materials is this insert best suited for? The Tungaloy WNMG080416-DM T9215 insert is optimised for medium steels; the CVD-coated carbide provides wear resistance suited to this material class. Can the insert be used for interrupted cuts? Yes, the T9215 grade combines toughness and wear resistance for productive use in continuous and lightly interrupted cutting conditions. Which chipbreaker should be selected for stable machining? The DM chipbreaker fitted to this insert is intended for reliable chip control and stable cutting in common turning operations. How does the ISO designation affect holder selection? The ISO code 080416 and the WNMG form indicate the geometry and dimensions; matching the holder by form, clearance angle, tolerance class, fastening, size and thickness ensures correct fit and performance. Are replacement screws and shims required for a complete system? A complete tool system typically includes the ISO insert, appropriate holder or boring bar, a shim/locking kit and spare screws to enable secure mounting and quick replacement Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T9215 Wendeplatten - Tungaloy
Take advantage of the high wear resistance and fracture toughness of the CVD-coated carbide grade T9215 together with the stable 1.6 mm corner radius for efficient, productive turning operations; order directly via Metav Werkzeuge or contact our consultants for application advice. WNMG080416 T9215 ISO turning insert — CVD-coated carbide for turning, Tungaloy A WNMG080416 T9215 ISO turning insert engineered for external and internal turning, featuring a trigon form with a 0° clearance angle and a cylindrical hole for secure mounting. CVD-coated carbide grade T9215 ISO WNMG 080416 trigon insert 1.6 mm corner radius for robust cutting Double-sided chipbreaker with cylindrical hole High productivity for medium steel with wear-resistant coating The CVD-coated carbide T9215 grade combines high wear resistance with improved fracture toughness, making it especially suited to medium steel. This geometry and coating pairing supports increased tool life under continuous to slightly interrupted cuts, which in turn enables longer production runs and fewer index changes. The result is a measurable improvement in process uptime and repeatable part quality. Geometry designed for stability and access in turning The trigon-style insert with an 80° wedge geometry and 0° clearance angle is balanced to provide a stable cutting edge while maintaining accessibility in external and internal applications. The 1.6 mm corner radius increases edge strength and reduces the risk of chipping on heavier cuts, while the trigon form offers a good compromise between cutting-edge robustness and the ability to reach tighter workpiece features. Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness. Complete ISO system guidance for reliable mounting This ISO insert is intended to be used as part of a complete system: the ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. The cylindrical hole allows positive locating and repeatable clamping; the shim/clamp ensures correct seat geometry and consistent cutting engagement. Correct assembly minimises vibration and positional error, supporting better surface finishes and predictable tool life. Practical selection notes for stable machining results Choose the double-sided chipbreaker style and the T9215 grade to match the workpiece material and the nature of the cut — continuous or slightly interrupted. A larger corner radius like 1.6 mm improves stability and is beneficial for higher material removal rates, while a smaller radius would favour finer surface finish. Where interrupted cuts or unstable setups are anticipated, opt for a more robust grade or reduce uncut chip thickness to protect the insert and the workpiece. Contact Metav Werkzeuge for tailored recommendations, availability and ordering of Tungaloy WNMG080416 T9215 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773936 Manufacturer SKU: TUN6773936 Internal SKU: 6773936-Tungaloy Label: WNMG080416 T9215 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Thickness: 4.76 mm Wedge angle: 80° Clearance angle: 0° Size: 08 Special features Material: carbide Coating: CVD-coated carbide (T9215) Shape: trigon Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert designed to machine? The Tungaloy WNMG080416 T9215 insert is optimised for medium steel applications; the T9215 CVD-coated carbide provides wear resistance suitable for continuous to slightly interrupted cuts. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius increases edge strength and stability, supporting higher cutting forces and longer tool life, which is why it is specified for more productive turning operations with the WNMG080416 T9215 insert. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the WNMG080416 T9215 is an ISO insert intended for use with suitable external holders or boring bars and a correct shim/clamp set. How many edges are available for indexing? The trigon form of the insert provides multiple indexing positions; the double-sided design and the trigon geometry together allow economical use of the cutting edges before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable edge stability make this insert well suited to productive turning operations; the CVD-coated carbide grade and trigon form deliver consistent results in continuous to lightly interrupted cuts. Order the WNMG080416‑ZM T9215 directly via Metav Werkzeuge or consult the technical team for matching holder and application advice. WNMG 080416 T9215 — Turning indexable insert WNMG080416‑ZM by Tungaloy, CVD‑coated carbide WNMG080416‑ZM T9215 is a trigon turning indexable insert designed for medium steel machining, combining wear resistance and edge security for productive shop-floor use. CVD-coated carbide T9215 for wear resistance Trigon form WNMG with 1.6 mm corner radius Cylindrical hole for secure clamping Optimised for continuous and light interrupted cuts Maximise uptime with a wear‑resistant coating and robust substrate The insert is produced from carbide and finished with a CVD-coated surface, which increases wear resistance under elevated contact temperatures and repetitive loading. This material and coating combination reduces flank and crater wear, which in turn extends tool life and contributes to higher overall productivity when machining medium steels. The technical design is intended for production environments where repeatability and stable cutting performance are required; choosing the right chipbreaker and grade minimises unplanned tool changes and supports predictable process planning. Secure clamping and geometric compatibility for reliable turning The trigon plate geometry with a 1.6 mm corner radius and a cylindrical hole ensures positive seating in standard ISO holders; the insert is supplied in the ISO‑standardised shape and size so the compatibility to a holder is determined by form, clearance angle, tolerance class, fastening style, size and thickness. The neutral 0° clearance supports stable cutting forces and is suited to a broad range of external and internal turning tasks. Because the system is built from the plate, an appropriate outer holder or boring bar, the correct shim/clamp set and the specified screw, repeatable clamping and process security are achieved. Application guidance for reliable component quality The T9215 grade is formulated as a first choice for medium steel machining, offering a balance between fracture resistance and wear resistance that favours continuous to slightly interrupted cuts. When combined with a matching ZM chipbreaker, the insert controls chip formation to improve surface finish and evacuate heat efficiently. Selection of cutting data should follow typical carbide guidelines: modest feeds for fine finishes, higher cutting speeds for productivity where machine and workpiece stability permit. The insert's ISO conformity simplifies tool selection and inventory management while enabling consistent part quality across shifts. For tailored application support or to secure original Tungaloy inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for personalised recommendations and availability. Technical Data Article number: 6772409 Manufacturer SKU: TUN6772409 SKU: 6772409-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: WNMG080416‑ZM T9215 Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Size designation: 08 ISO code: 080416 Included hole: with hole (cylindrical) Included angle: 80° Special features Material: carbide Coating: CVD (T9215 grade) Plate form: trigon Chipbreaker: ZM Clearance angle: 0° Typical use: external and internal turning Compatibility: ISO‑standard plate fit (form, clearance, tolerance, fastening, size, thickness) System components: plate, matching outer holder or boring bar, shim/clamp set, replacement screw FAQ What machining tasks is this insert best suited for? The WNMG080416‑ZM T9215 insert from Tungaloy is optimised for medium steel turning in continuous to slightly interrupted cuts, where wear resistance and edge security are priorities. How does the T9215 grade affect tool life and productivity? T9215 is a CVD‑coated carbide grade designed to combine wear resistance with fracture toughness; this balance typically extends tool life under steady production and supports higher productivity with consistent component quality. Which holders are compatible with this trigon plate? Compatibility depends on holder form, clearance, tolerance class, fastening and plate size/thickness; the plate conforms to ISO standards and is intended for use with matching ISO external holders or boring bars and the correct clamp/shim set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T9225 Wendeplatten - Tungaloy
WNMG 080416 T9225 Wendeschneidplatte für Drehen von Tungaloy Wendeschneidplatte WNMG 080416 T9225 für präzises Außen- und Innendrehen in der mittleren bis schweren Stahlbearbeitung ISO-genormte Trigon-Form für stabile Schnitte CVD-beschichtetes Hartmetall für robuste Standzeit Universalsorte T9225 bei wechselnden Eingriffsbedingungen Mit zylindrischem Loch und Befestigungsoptionen Eckenradius 1.6 mm für ausgewogene Schnittkräfte Langlebigkeit durch CVD-Beschichtung und Hartmetall Hartmetall mit CVD-Beschichtung sorgt für eine langlebige Schneidkante und reduzierte Verschleißrate. Die Sorte T9225 wurde speziell als robuste Universalsorte konzipiert, die Zähigkeit bei leicht unterbrochenem Schnitt bietet. Dadurch ergibt sich ein klarer Vorteil in der Zerspanung von Stahl: weniger Werkzeugwechsel, konstantere Standzeiten und damit höhere Produktivität pro Werkzeugposition. Produktive Einsatzfelder beim Drehen Wendeschneidplatten dieser Bauart eignen sich für Außen- und Innendrehen bei variierenden Schnittbedingungen. Die Trigon-Plattenform ermöglicht stabile Auflage am Halter und gute Zugänglichkeit bei kleineren Durchmessern. Bei Einsatz in der Serienfertigung führt die Kombination aus ISO-Norm, passender Form und der THS-Spanbrecher-Geometrie zu reproduzierbaren Ergebnissen und besserer Oberflächengüte. Integration in den Werkzeugprozess und Halterkompatibilität Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die WNMG-Schnittstelle mit zylindrischem Loch erfordert passende Außenhalter oder Bohrstangen sowie Unterlagen und Klemmsätze für sicheren Sitz. Ein korrekt ausgewählter Halter reduziert Vibration und sorgt für gleichbleibende Schnittbedingungen, was sich direkt auf Standzeit und Bearbeitungsqualität auswirkt. Auswahlkriterien und Montagehinweise Beim Einsatz ist auf Freiwinkel 0° und Eckenradius 1.6 mm zu achten; diese Kombination bietet ein ausgewogenes Verhältnis von Kantenstabilität und Schnittkraft. Für wechselnde Eingriffsbedingungen empfiehlt sich die Sorte T9225, da sie mehr Zähigkeit bietet als reine Hochleistungssorten. Beim Einsetzen sind Schrauben und Unterlage richtig zu dimensionieren, um Drehmomente gleichmäßig zu übertragen. Zielgruppe und Anwendungsvorteile Fertigungsbetriebe mit Schwerpunkt auf Stahlbearbeitung profitieren von der WNMG 080416 T9225 durch bessere Prozesssicherheit und geringeren Werkzeugverbrauch. Die Platte ist besonders geeignet für Anwender, die robuste, wiederholbare Ergebnisse bei schwankenden Schnittbedingungen benötigen. Produktionsleiter erreichen so planbarere Rüstintervalle und eine höhere Ausbringung. Empfehlung: Setzen Sie auf die robuste CVD-beschichtete Wendeschneidplatte T9225 von Tungaloy für produktive Stahlbearbeitung; bei Fragen technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6781329 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-THS T9225 Hersteller-SKU: TUN6781329 Fakten Eckenradius: 1.6 mm Plattendicke: 4,76 mm Plattenform: Trigon Plattengröße: 08 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (T9225) Spanbrecher: THS (optimiert für mittlere bis schwere Schnitte) Loch: mit Loch, zylindrisches Loch Einsatz: Außen- und Innendrehen Norm: ISO-genormt FAQ Für welche Werkstoffe eignet sich die Wendeschneidplatte am besten? Die WNMG080416-THS T9225 von Tungaloy ist optimiert für Stahlbearbeitung und bietet gute Zähigkeit bei wechselnden Eingriffsbedingungen, sodass sie sich für mittlere bis schwere Schnitte in Stahl empfiehlt. Welche Halter werden für diese Platte benötigt? Verwendet werden ISO-kompatible Außenhalter oder Bohrstangen, die zur WNMG-Form passen; Befestigung über zylindrisches Loch und passende Unterlagen/Klemmsätze sind erforderlich. Wie wirkt sich der Eckenradius von 1.6 mm auf die Bearbeitung aus? Der Eckenradius 1.6 mm bietet eine ausgewogene Kantenstabilität, reduziert Kantenbruch und ermöglicht höhere Schnittkräfte bei gleichzeitig akzeptabler Oberflächengüte. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte T9225 wurde als robuste Universalsorte entwickelt und bietet erhöhte Zähigkeit, was sie bei leicht unterbrochenen Schnitten vorteilhaft macht. Welche Artikelnummer hat die Platte für Nachbestellungen? Die Artikelnummer lautet 6781329, Hersteller-SKU TUN6781329; Bezeichnung WNMG080416-THS T9225. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T9225 Wendeplatten - Tungaloy
WNMG 080416 T9225 Drehwendeschneidplatte von Tungaloy für Drehen Die WNMG080416-AM T9225 ist eine ISO-genormte Wendeschneidplatte für Außen- und Innendrehen, entwickelt für mittlere bis schwere Stahlbearbeitung bei wechselnden Schnittbedingungen. CVD-beschichtetes Hartmetall für hohe Standzeit Trigon-Form mit 80° Winkel, Eckenradius 1,6 mm Mit zylindrischem Loch für sichere Befestigung AM-Spanbrecher für wechselnde Schnittbedingungen Universalsorte T9225, robust und vielseitig einsetzbar Robuste Schneidstoffkombination für produktive Zerspanung Die CVD-beschichtetes Hartmetall-Schneidstoffkombination der Universalsorte T9225 kombiniert Zähigkeit und Verschleißfestigkeit, sodass unterbrochene Schnitte und wechselnde Eingriffsbedingungen sicher beherrscht werden. Durch die Beschichtung wird die Standzeit erhöht und die Wärmebeständigkeit verbessert, was zu geringeren Stillstandzeiten und konstanteren Ergebnissen in der Stahlbearbeitung führt. Anwender profitieren von gleichbleibender Oberflächenqualität und Wirtschaftlichkeit bei Serien- und Einzelfertigung. Effiziente Anwendung beim Außen- und Innendrehen Für Außen- und Innendrehen bietet der AM-Spanbrecher eine gute Spanformung bei mittleren bis schweren Schnitten; dadurch reduzieren sich Aufbauschichten und Werkzeugwechselzyklen. Die Wahl der Sorte T9225 empfiehlt sich besonders, wenn Stabilität und Zähigkeit gefragt sind. Anwender erzielen durch passende Spanbrecher- und Schneidstoffwahl eine optimale Kombination aus Prozesssicherheit und Bearbeitungsgeschwindigkeit, was die Fertigung produktiver macht. Konstruktion und Befestigung geben Sicherheit im Einsatz Die Trigon-Form mit 80° Einstellwinkel und Eckenradius 1,6 mm bietet eine stabile Einspannung bei verschiedenen Haltertypen. Die Plattendicke von 4,76 mm und das zylindrische Loch sorgen für sichere Befestigung und wiederholgenaue Positionierung auf Außenhaltern oder Bohrstangen. Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse und Befestigungsart bestimmt; deswegen sind passende Unterlagen, Klemmsätze und Ersatzschrauben für einen sicheren Prozess unerlässlich. Zielgruppe und Einsatzszenarien Die Wendeschneidplatte richtet sich an Lohnfertiger, Instandhaltung sowie Serienfertiger, die robuste Lösungen für Stahlbearbeitung mit wechselnden Schnittverhältnissen suchen. Werkstätten profitieren von der Universaltauglichkeit der Sorte T9225, während Anwender mit instabilen Aufnahmen oder unterbrochenen Schnitten von der erhöhten Zähigkeit und Standzeit profitieren. Durch die ISO-Genormtheit ist die Integration in bestehende Haltersysteme unkompliziert möglich. Empfehlung: Die Universalsorte T9225 von Tungaloy eignet sich besonders für produktive Stahlbearbeitung mit wechselnden Schnitten – Beratung und Bestellung über Metav Werkzeuge, Email info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6781280 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-AM T9225 SKU Hersteller: TUN6781280 Fakten Eckenradius: 1,6 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet Spanbrecher: AM Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Freiwinkel: 0° ISO-Code: 080416 Einsatz: Außen- und Innendrehen Modellserie: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe lassen sich mit dieser Wendeschneidplatte bearbeiten? Die WNMG080416-AM T9225 von Tungaloy ist ausgelegt für mittlere bis schwere Stahlbearbeitung; die Universalsorte T9225 bietet gute Ergebnisse bei wechselnden Schnittbedingungen und teilweise unterbrochenen Schnitten. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die Trigon-Form und der AM-Spanbrecher erlauben den Einsatz sowohl beim Außen- als auch beim Innendrehen, wobei die Halterkompatibilität durch Form, Freiwinkel und Befestigung sichergestellt werden muss. Welche Vorteile bietet die CVD-Beschichtung? Die CVD-beschichtetes Hartmetall-Schicht erhöht Verschleißfestigkeit und Wärmebeständigkeit, verlängert die Standzeit und sorgt für konstantere Oberflächengüten bei der Stahlbearbeitung. Wie wird die Platte auf dem Halter fixiert? Die Platte verfügt über ein zylindrisches Loch und ist für Halter mit entsprechender Unterlage und Klemmsatz vorgesehen; Plattendicke, Form und Befestigungsart bestimmen die Kompatibilität. Welche Artikelnummer und SKU sind relevant für Nachbestellung? Für Nachbestellungen bitte Artikelnummer 6781280 und SKU TUN6781280 angeben; Bezeichnung WNMG080416-AM T9225 hilft bei der schnellen Zuordnung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide and a robust universal T9225 grade for reliable medium-to-heavy Stahl turning; the trigon form with a 1.6 mm corner radius ensures repeatable edge strength and stable chip control. Order directly via Metav Werkzeuge or consult the team for application-specific selection and tooling advice. WNMG 080416 T9225 – Turning insert (ISO trigon) by Tungaloy The WNMG080416-DM T9225 is an ISO-standard trigon turning insert engineered for medium-to-heavy turning operations, offering a CVD-coated cemented carbide grade tailored to variable engagement and slightly interrupted cuts. CVD-coated carbide grade T9225 Designed for medium to heavy Stahl turning Trigon insert, 1.6 mm corner radius 0° clearance with cylindrical hole High-performance grade for robust turning stability The T9225 grade combines a CVD-coated cemented carbide substrate with a composition optimised for toughness and wear resistance, making it suitable where changing engagement or light interruptions occur. The result is consistent cutting-edge life under variable conditions and reduced risk of edge chipping, which supports uninterrupted production and predictable tool-change intervals. This performance translates into fewer stoppages and more stable cycle times in serial turning applications. Predictable chip control and surface quality in production Equipped with a DM chipbreaker, the insert delivers controlled chip formation across a range of feeds and depths, helping to avoid long curling chips and to maintain steady evacuation in automatic and semi-automatic setups. The trigon geometry and the 1.6 mm corner radius produce a balance between strength and finish, enabling good surface integrity on a variety of Stahl workpieces while preserving the cutting edge during moderate interruptions. Straightforward compatibility and secure clamping As an ISO-standard turning insert, the part conforms to form, clearance, tolerance class, mounting and size norms, which simplifies selection of holders, shim packs and clamping screws. The cylindrical hole and standard thickness (4.76 mm) allow quick assembly into compatible external holders or boring bars, minimising downtime when changing inserts. Clear specification of the geometry reduces set-up errors and facilitates predictable process planning. Practical advantages for everyday workshop use The combination of the trigon form, 0° relief and the robust coating makes this insert a pragmatic choice for shops seeking a single, universal grade for mid-to-heavy Stahl machining. The design supports reproducible tool life and consistent part quality, helping to reduce the number of different grades kept in stock. Where process security and reliable edge behaviour are priorities, the insert offers an effective blend of economy and performance. Contact Metav Werkzeuge to discuss how Tungaloy turning inserts with the T9225 grade can improve process reliability and to arrange an application review via Metav Werkzeuge Technical Data Article number: 6945165 Manufacturer SKU: TUN6945165 SKU: 6945165-Tungaloy Label: WNMG080416-DM T9225 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Thickness: 4.76 mm Size: 08 WPL ISO code: 080416 Main angle: 80° Relief angle: 0° Special features Coating: CVD Material: Cemented carbide Chipbreaker: DM Insert form: Trigon Hole style: Cylindrical hole Application: Turning (Drehen) FAQ What machining tasks is this insert best suited for? The WNMG080416-DM T9225 insert is intended for medium-to-heavy Stahl turning and performs well where engagement varies or cuts are slightly interrupted. Is the T9225 grade suitable for finishing or only roughing? Tungaloy’s T9225 is a robust universal grade that suits both medium roughing and mixed finishing operations, offering a compromise between wear resistance and toughness. How does the chipbreaker affect production? The DM chipbreaker promotes controlled chip formation, improving evacuation and contributing to consistent surface quality and safer automatic machining. Can this insert be used in standard ISO holders? Yes; the ISO-standard geometry, cylindrical hole and specified thickness allow compatibility with standard external holders and boring bars designed for WNMG inserts. Which material is this insert made from? The cutting part is produced from cemented carbide and finished with a CVD coating to enhance wear resistance during Stahl machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 T9225 Wendeplatten - Tungaloy
WNMG 080416 T9225 – Wendeplatte für Drehen von Tungaloy Die WNMG 080416 T9225 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für mittlere bis schwere Stahlbearbeitung unter wechselnden Eingriffsbedingungen. CVD-beschichtetes Hartmetall für lange Standzeit Robuste Universalsorte T9225 für wechselnde Schnitte Trigon-Form mit stabiler Kantenaufstandsfläche Eckenradius 1,6 mm für universelle Eckbearbeitung Befestigung mit zylindrischem Loch für sichere Fixierung Mehr Produktivität durch robuste Schneidstofftechnologie Die WNMG 080416 T9225 überzeugt durch CVD-beschichtetes Hartmetall, das Verschleiß reduziert und Standzeiten erhöht. Die Kombination aus Beschichtung und robuster Kornstruktur sorgt dafür, dass bei wechselnder Schnittbelastung weniger Ausfälle auftreten und weniger Werkzeugwechsel notwendig sind. Daraus resultiert eine messbare Produktivitätssteigerung und geringere Ausfallzeiten in der Fertigung. Vielseitige Einsatzmöglichkeiten und einfache Kompatibilität ISO-Genormtheit stellt sicher, dass die Platte mit gängigen Außenhaltern und Bohrstangen kompatibel ist; die Verbindung hängt von Form, FreiWinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die Trigon-Form bietet drei schneidfähige Kanten pro Platte, sodass bei Verschleiß schnell umgespannt werden kann. Anwender profitieren von planbaren Rüstzeiten und hoher Verfügbarkeit im Produktionsprozess. Sortenwahl T9225 für anspruchsvolle Stahlbearbeitung Die Sorte T9225 ist als robuste Universalsorte ausgelegt und bietet eine gute Balance zwischen Zähigkeit und Verschleißfestigkeit, besonders bei leicht unterbrochenen Schnitten. Nutzer erhalten eine verlässliche Leistung bei mittleren bis schweren Schnitten in Stahlwerkstoffen, ohne sehr spezielle Prozessbedingungen voraussetzen zu müssen. Dadurch eignet sich die Platte für vielfältige Serien- und Einzelteile. Praktische Hinweise für optimale Standzeit Für dauerhaft gute Ergebnisse empfiehlt sich die Abstimmung von Eckenradius und Spanbrecher auf Werkstückstabilität und Schnittbedingungen. Der Eckenradius 1,6 mm bietet eine gute Mischung aus Stabilität und Formbarkeit der Schnittkante; der Spanbrecher TH unterstützt das Spanverhalten bei instabilen Schnitten. Saubere Befestigung über das zylindrische Loch und geeignete Unterlage/Klemmsatz minimieren Vibrationen und steigern die Lebensdauer der Schneidkante. Für zuverlässige Stahlbearbeitung empfiehlt sich die WNMG 080416 T9225 von Tungaloy – Beratung und Bestellung über Metav Werkzeuge, eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930. Produktmerkmale Artikelnummer: 6780761 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Fakten Eckenradius: 1,6 mm Plattendicke: 4,76 mm Winkel: 80° Plattengröße: 08 FreiWinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Dampfabscheidung) Sorte: T9225 (robuste Universalsorte) Spanbrecher: TH (Spanbrecher, geeignet für wechselnde Schnitte) Plattenform: Trigon Befestigung: mit Loch, zylindrisches Loch ISO-Bezeichnung: WNMG080416-TH Hersteller-SKU: TUN6780761 SKU: 6780761-Tungaloy FAQ Welche Anwendung ist für diese Wendeplatte vorgesehen? Die Wendeplatte WNMG 080416 T9225 von Tungaloy ist für Außen- und Innendrehen konzipiert und eignet sich besonders für mittlere bis schwere Stahlbearbeitung. Welche Vorteile bietet die Sorte T9225? Die Sorte T9225 liefert eine hohe Zähigkeit bei wechselnden Schnittbedingungen, was die Standzeit erhöht und unerwartete Werkzeugwechsel reduziert. Wie wirkt sich der Eckenradius 1,6 mm aus? Der Eckenradius 1,6 mm bietet eine ausgewogene Kombination aus Kantensicherheit und Formgenauigkeit, geeignet für universelle Bearbeitungsaufgaben. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die T9225-Sorte ist speziell für Situationen mit leicht unterbrochenem Schnitt entwickelt und bietet dafür erhöhte Zähigkeit. Welche Befestigungsart ist vorhanden? Die Platte verfügt über ein zylindrisches Loch zur sicheren Befestigung in entsprechenden Haltersystemen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 T9225 Wendeplatten - Tungaloy
WNMG 080416 T9225 Drehwendeschneidplatte für Drehen von Tungaloy Die WNMG 080416 T9225 ist eine ISO-genormte Drehwendeschneidplatte für das Außen‑ und Innendrehen, entwickelt für robuste Universaleinsätze in der mittleren bis schweren Stahlbearbeitung. ISO‑genormt für einfache Halterkompatibilität CVD‑beschichtetes Hartmetall für hohe Standzeit Trigone Plattenform für stabile Schnitthaltigkeit Spanbrecher PM für zuverlässige Spanformung Höhere Produktivität durch robuste Schneidstoffauswahl Die Kombination aus CVD‑Beschichtung und Hartmetall sorgt für eine ausgewogene Balance zwischen Verschleißfestigkeit und Zähigkeit. Deshalb reduziert die Platte Werkzeugwechsel und Stillstandszeiten bei wechselnden Eingriffsbedingungen. Die Sorte T9225 wurde für die mittlere bis schwere Stahlbearbeitung optimiert und bietet dadurch eine verbesserte Prozesssicherheit bei unterbrochenen Schnitten. Präzise Schnittkontrolle dank durchdachter Geometrie Die trigone Plattenform mit Eckenradius 1,6 mm und einem Freiwinkel von 0° gewährleistet stabile Eingriffsbedingungen und reproduzierbare Schnittwinkel. Durch diese Geometrie lassen sich konstante Oberflächengüten erzielen, was die Nachbearbeitung reduziert und Fertigungsabläufe effizienter gestaltet. Einfache Integration und sicherer Halt im Systemaufbau Die WNMG080416‑PM ist ISO‑genormt, das heißt Form, Größe, Dicke und Befestigung erfüllen Standardvorgaben und erleichtern die Auswahl des passenden Halters. Die Ausführung mit zylindrischem Loch ermöglicht eine stabile Fixierung im Halter, wodurch Vibrationen minimiert und die Werkzeugstandzeit gesteigert werden. Anwendungshinweis und Materialempfehlung Die Wendeschneidplatte ist besonders geeignet für die Bearbeitung von Stahl in mittleren bis schweren Schnittbedingungen; der Spanbrecher PM unterstützt eine kontrollierte Spanbildung. Für Einsteiger: Eine CVD‑Beschichtung ist eine dünne keramische Schicht, die das Hartmetall vor thermischem Verschleiß schützt und so die Lebensdauer verlängert. Für produktive Stahlbearbeitung empfiehlt sich die WNMG080416‑PM T9225 von Tungaloy; bei technischen Fragen steht Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gern zur Verfügung Produktmerkmale Artikelnummer: 6796107 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-PM T9225 Hersteller SKU: TUN6796107 Fakten Plattendicke: 4,76 mm Plattengröße: 08 Eckenradius: 1,6 mm Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9225 Spanbrecher: PM Plattenform: trigon Lochstil: zylindrisches Loch Einsatz: Drehen, Außen- und Innendrehen Kompatibilität: ISO-genormt, passender Außenhalter oder Bohrstange erforderlich FAQ Welche Werkstoffe lassen sich mit dieser Platte bearbeiten? Die WNMG080416‑PM T9225 von Tungaloy ist für Stahl ausgelegt; die Sorte T9225 bietet Zähigkeit für wechselnde Schnittbedingungen und eignet sich besonders für mittlere bis schwere Stahlbearbeitung. Welche Vorteile bietet die CVD‑Beschichtung? Die CVD‑Beschichtung der WNMG080416‑PM erhöht die Verschleißfestigkeit des Hartmetalls und verbessert die Thermikresistenz, wodurch Standzeiten und Prozesssicherheit steigen. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte T9225 wurde genau für solche Anwendungen konzipiert; die erhöhte Zähigkeit sorgt für zuverlässige Performance bei leicht unterbrochenen Schnitten. Wie wird die Platte im Halter befestigt? Die Platte verfügt über ein zylindrisches Loch und ist ISO‑genormt, sodass sie mit passenden Außenhaltern oder Bohrstangen sicher geklemmt werden kann. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 100612 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, strong fracture toughness and ISO compatibility for productive turning operations; order directly via Metav Werkzeuge or consult our technical team for application support. WNMG100612-TH T9215 – WNMG 100612 turning insert for medium steel, CVD-coated carbide | Tungaloy The WNMG100612-TH T9215 is an ISO-standard turning insert designed for external and internal turning applications, offering a robust cutting edge and compatibility with ISO holders for consistent, productive machining. CVD-coated carbide for high wear resistance Optimised for medium steel machining 1.2 mm corner radius for robust edge ISO WNMG form with cylindrical hole Consistent productivity for medium steel turning The WNMG geometry, combined with the T9215 CVD-coated carbide, delivers a reliable balance of wear resistance and toughness for medium steel machining. The grade is specified for continuous and lightly interrupted cuts, which means longer periods between index changes and fewer unscheduled tool exchanges. By selecting this insert, process planners gain a measurable improvement in component throughput and a reduction in handling time, as the cutting material is engineered to resist flank and crater wear under typical turning feeds and depths. Durable edge life with controlled chip behaviour The TH chipbreaker and CVD coating work together to control chip formation and reduce thermal load at the cutting edge. This combination offers enhanced fracture toughness and predictable wear progression, helping to avoid sudden edge failure during steady-state production. The insert’s 1.2 mm corner radius increases edge robustness, improving stability when machining interrupted surfaces or when slight variances in fixturing occur. For manufacturers aiming at repeatable surface quality, the engineered coating and chip control support consistent finishes across batches. Simple integration into ISO tool systems As an ISO-standard WNMG insert with a cylindrical hole, the component fits common external holders and boring bars when matched by form, relief angle and tolerance class. Important dimensions are clear at a glance: 10 mm size, 6.35 mm thickness and an 80° lead angle, enabling reliable seat contact and clamping. This standardisation reduces setup time and simplifies storekeeping, since the insert integrates into existing tooling systems without special adaptors. When assessing a tool change, check holder compatibility by matching the insert form, relief angle and size to ensure correct clamping and repeatability. For high-productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored advice and rapid availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772418 Manufacturer SKU: TUN6772418 Label: WNMG100612-TH T9215 Model series: ISO turning inserts Facts Corner radius: 1.2 mm Thickness: 6.35 mm Size: 10 Lead angle: 80° Relief angle: 0° Special features CVD-coated carbide grade T9215 Chipbreaker: TH Shape: trigon (WNMG) Hole: cylindrical Application: turning (external and internal) Best suited for medium steel Designed for continuous and lightly interrupted cuts FAQ What materials is this insert intended for? The T9215 grade is optimised for medium steel machining; the insert performs well in continuous to lightly interrupted turning applications. Which insert geometry and dimensions apply? This is a WNMG trigon insert with a 1.2 mm corner radius, 6.35 mm thickness, 10 mm size and an 80° lead angle, fitted with a cylindrical centre hole. How does the coating affect performance? The CVD-coated carbide provides enhanced wear resistance while the TH chipbreaker improves chip control, resulting in steadier cuts and extended edge life. Is the insert compatible with standard ISO holders? Yes. The ISO-standard geometry and cylindrical hole allow fitting to compatible holders and boring bars when form, relief angle and tolerance class match. What cutting conditions suit this grade? The insert is specified for productive turning under continuous and lightly interrupted conditions on medium steel; exact speeds and feeds depend on machine and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 100612 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable breakage protection and consistent productivity for medium-steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG 100612 T9215 – Trigon turning insert, THS chipbreaker (Tungaloy) A WNMG 100612 T9215 trigon insert for turning, optimised for medium steel machining and suited to both external and internal operations Trigon ISO insert WNMG form CVD-coated carbide T9215 for medium steel THS chipbreaker for stable chip control Corner radius 1.2 mm, thickness 6.35 mm Increased productivity through robust carbide and coating The CVD-coated carbide grade T9215 combines high wear resistance with enhanced breakage safety, making it a reliable option for continuous to lightly interrupted cuts in medium steels. The coating improves tool life under stable cutting conditions and supports higher material removal rates, so machining cycles stay shorter and process stability improves. This results in fewer tool changes and a steadier production flow while maintaining consistent component quality. System compatibility and secure clamping for predictable results The insert is ISO-compliant, which simplifies integration into existing tool systems. Compatibility with a holder depends on insert form, 0° clearance angle, tolerance class, fastening method, size and thickness; the trigon profile and cylindrical hole enable secure, repeatable clamping in standard WNMG-style seats. Selecting a matching external holder and the correct tolerance class ensures repeatable positioning and consistent cutting geometry, reducing set-up time and scrap rates. Chip control and geometry that protect edge life The THS chipbreaker is designed for effective chip formation in medium steel, promoting short, controllable chips that are easier to evacuate. The corner radius 1.2 mm and 6.35 mm thickness provide mechanical strength at the cutting edge, increasing resistance to edge chipping during interrupted cuts or heavier feed steps. The insert supports both external and internal turning operations; for unfamiliar setups, consult the technical data sheet or contact Metav Werkzeuge for recommended feeds and depths to match stability and surface-finish requirements. For tailored cutting data and immediate availability contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge recommends the Tungaloy WNMG100612-THS T9215 for productive and reliable medium-steel turning applications Technical data Article number: 6774099 Manufacturer SKU: TUN6774099 Designation: WNMG100612-THS T9215 Model series: ISO turning inserts Material: Cemented carbide Application: Turning Facts Corner radius: 1.2 mm Thickness: 6.35 mm Insert size: 10 Clearance angle: 0° Hole: with cylindrical hole Geometry angle: 80° Special features CVD-coated carbide grade T9215 THS chipbreaker Trigon insert form Compatible with ISO external holders Suitable for continuous to lightly interrupted cuts Optimised for medium steel machining FAQ What materials is this insert intended for? The Tungaloy WNMG100612-THS T9215 is optimised for medium steel machining; the CVD-coated cemented carbide grade provides wear resistance suited to these materials. How does the THS chipbreaker affect performance? The THS chipbreaker on this insert promotes short, controlled chips in turning of medium steels, improving chip evacuation and protecting the cutting edge during continuous and lightly interrupted cuts. Which holders are compatible with this insert? Compatibility depends on the holder seat matching the WNMG trigon form, the 0° clearance angle, tolerance class, fastening method and the 6.35 mm plate thickness; use ISO-compatible external holders sized for WNMG inserts. What benefits does the CVD coating deliver? The CVD-coated carbide offers enhanced wear resistance and thermal stability compared with uncoated grades, extending tool life and enabling more consistent production on medium-steel components. Is the insert suitable for internal turning as well as external turning? Yes, the trigon geometry and secure clamping via the cylindrical hole make the insert suitable for both external and internal turning operations when matched with the correct holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com