WNMG 080412 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide performance, a trigon form and a 1.2 mm corner radius to achieve stable, productive turning in medium-to-heavy steel operations; order the insert via Metav Werkzeuge or consult the technical team for application matching. WNMG080412-AS T9225 — WNMG 080412 turning insert, CVD-coated carbide (Tungaloy) The WNMG080412-AS T9225 is an ISO-standard indexable turning insert designed for robust turning of medium to heavy steels and for interrupted cuts. CVD-coated carbide grade T9225 Robust universal grade for steel Trigon insert with 1.2 mm corner radius ISO turning compatibility, cylindrical hole Greater productivity through a robust, universal grade The CVD-coated T9225 grade combines wear resistance with fracture toughness to sustain longer tool life under varying engagement conditions. As a CVD-coated carbide insert it offers improved resistance to abrasion and thermal load, which translates into fewer tool changes and reduced cycle interruptions. For shops that run mixed batches or see occasional interrupted cuts, this grade delivers predictable performance and keeps machining windows narrow, supporting consistent component throughput. Stable geometry and secure clamping for reliable turning The trigon shape and the corner radius 1.2 mm provide an advantageous balance between edge strength and achievable surface finish. The insert’s 4.76 mm thickness and cylindrical hole ensure secure mounting in compatible ISO holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The AS chipbreaker is designed to control chip form during robust cutting, improving evacuation and reducing built-up edge risk during heavier depths of cut. Practical benefits for process security and part quality Using this indexable insert in a properly selected holder and clamping set reduces downtime and supports repeatable component quality. The geometry and grade are optimised for turning applications where stability and consistent chip control matter, helping to lower scrap rates and rework. Should clarification be required on holder matching or cutting data, technical documentation and specification support are available to assist in selecting the correct chipbreaker and insert grade for the application. Request specification support from Metav Werkzeuge to match the Tungaloy WNMG080412-AS T9225 to the application and secure supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780822 Manufacturer SKU: TUN6780822 SKU: 6780822-Tungaloy Model series: ISO turning indexable inserts Material: carbide Core specifications ISO designation: 080412 Size code: 08 Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included hole: cylindrical Included angle: 80° Special features Grade: T9225 Coating: CVD Chipbreaker: AS Shape: trigon Typical application: turning; medium to heavy steel; interrupted cuts System components: insert, matching external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suited for? The WNMG080412-AS T9225 is optimised for medium to heavy steel turning; the T9225 grade provides the toughness needed for variable engagement and interrupted cuts. What does the T9225 grade and CVD coating provide? T9225 is a CVD-coated carbide formulation that increases wear resistance while retaining toughness, enabling longer tool life and stable cutting in demanding steel applications. How does the AS chipbreaker influence machining? The AS chipbreaker on this insert promotes controlled chip formation and evacuation, reducing built-up edge and improving process stability during heavier cuts and interrupted machining. Which holder characteristics determine compatibility? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the WNMG080412-AS requires a matching ISO turning holder with appropriate clamping and shim. Can the insert be used for finishing as well as roughing? With a 1.2 mm corner radius the insert favours strength and stability; finish capability depends on feed and holder rigidity, but the geometry can be used for both robust finishing and roughing when parameters are adjusted. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225 and a double-sided chipbreaker for reliable, productive medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult the specialists for application-specific setup. WNMG 080412 T9225 ISO turning indexable insert — trigon 80° by Tungaloy WNMG080412 T9225 is an ISO-format trigon turning insert designed for general external and internal turning where robustness and adaptability to varying engagement conditions are required *Trigon insert WNMG 080412, 80° geometry *CVD-coated carbide grade T9225 for steel machining *Double-sided chipbreaker for interrupted cuts *Compatible with ISO turning holders, cylindrical hole Increased process stability and tool life for steel turning The combination of a CVD-coated carbide substrate and the T9225 grade delivers a balance of wear resistance and toughness that suits medium to heavy steel machining. The coating improves resistance to flank and crater wear while the substrate retains sufficient toughness for variable engagement. With an 80° insert angle and a 1.2 mm corner radius, the geometry increases edge strength, which reduces the risk of chipping during heavier cuts or slight interruptions. This results in more consistent tool life and fewer index changes, helping to maintain throughput and reduce unscheduled stops. Easy integration into ISO tool systems and secure clamping Designed as an ISO-series turning insert, compatibility with a holder is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert's trigon shape and 4.76 mm thickness make it straightforward to seat in standard ISO turning holders; the cylindrical hole ensures secure mounting with the appropriate clamp and screws. The insert is prepared for system-based use—insert, holder, backing and clamping set—so changeovers and stock management are simplified. Clear system compatibility reduces set-up time and supports reproducible process parameters on the shop floor. Practical cutting advantages and application guidance The double-sided chipbreaker supports chip control under interrupted cuts and varying engagement, helping to maintain stable cutting conditions and surface quality. As a robust universal grade, the insert is recommended where conditions switch between steady cuts and mildly interrupted sections; selecting the matching chipbreaker style and grade ensures optimum results. The trigon geometry provides economical edge utilisation, and using the insert with appropriate cutting data and coolant strategy will improve surface finish and reduce cycle times. For workshops seeking predictable, repeatable performance, this option provides a good balance between productivity and operational resilience. For tailored advice on using Tungaloy turning inserts or for ordering through Metav Werkzeuge, please contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and recommended cutting parameters Technical data Article number: 6796061 Manufacturer SKU: TUN6796061 Vendor SKU: 6796061-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Format: WNMG080412 Size designation: 08 Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Hole: with cylindrical hole Insert angle: 80° Special features Grade/coating: T9225, CVD-coated carbide Chipbreaker: double-sided Shape: trigon Application: external and internal turning Suitable for: medium to heavy steel machining Compatibility notes: matches ISO holders by form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The T9225 grade and CVD-coated carbide construction are optimised for medium to heavy steel machining, making the insert a reliable choice for general steel turning tasks. How does the double-sided chipbreaker benefit machining? A double-sided chipbreaker provides consistent chip control on both indexable faces, supporting interrupted cuts and variable engagement to maintain process stability and surface quality. Is the insert compatible with standard ISO holders? Compatibility is achieved when holder form, relief angle, tolerance class, fastening, size and thickness match the insert; the trigon WNMG080412 format and cylindrical hole are designed for standard ISO turning holders. What are the key geometry values to note for set-up? Key values include the 80° insert angle, 1.2 mm corner radius and 4.76 mm thickness; these influence edge strength, feed choices and clamping requirements. Which SKU should be referenced when ordering or requesting data? Reference SKU 6796061-Tungaloy or manufacturer SKU TUN6796061 when requesting application data or placing orders for this turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and a proven trigon geometry for consistent medium to heavy steel turning; the combination of durability, predictable chip control and ISO compatibility supports stable production. Order via Metav Werkzeuge or request application advice from our consultants for rapid integration. WNMG 080412 T9225 – ISO turning insert, CVD-coated carbide, 80° trigon (Tungaloy) The WNMG080412-AM T9225 is an ISO-standard trigon turning insert designed for outside and inside turning, providing a durable solution for interrupted cuts and variable cutting conditions in steel machining. ISO trigon insert WNMG 080412 AM CVD-coated carbide grade T9225 80° cutting angle, 1.2 mm corner radius Suitable for medium to heavy steel turning Precision and compatibility for reliable turning This insert is manufactured to ISO-standard dimensions, ensuring straightforward compatibility with matching holders and tool systems. The trigon plate form with an 80° cutting angle offers a balance between strength and access for external and internal contours, while the standardized geometry simplifies tool inventory and reduces setup time. The result is predictable tool life and consistent part geometry across production runs. Performance and robustness in steel machining Equipped with a CVD-coated carbide grade T9225, the tool delivers a robust universal grade tailored to medium to heavy steel applications. The coating improves wear resistance at elevated temperatures, while the substrate maintains toughness during slightly interrupted cuts. This combination supports higher material removal rates and fewer insert changes, translating into measurable process efficiency. Design details that ease tool selection and chip control The trigon shape and chipbreaker AM are engineered for stable chip formation under variable engagement. The 1.2 mm corner radius increases edge strength where moderate feed rates are required, reducing the risk of edge chipping in unstable conditions. The presence of a cylindrical hole for secure clamping ensures repeatable positioning, and ISO conformity means the insert can be matched to a broad range of external holders and boring bars. Practical guidance for integration into production Selection of this insert should be guided by workpiece material, feed and depth of cut: the T9225 grade suits operations where a balance of wear resistance and toughness is required. In applications with frequent interruptions or mixed alloy content, this insert supports continued productivity with stable performance. For tailored cutting data and holder recommendations, refer to the tool system documentation or consult technical advisors to align cutting parameters with machine rigidity and fixture design. Contact Metav Werkzeuge for specific cutting data and to order the Tungaloy WNMG 080412 T9225 insert for robust steel turning Technical data Article number: 6780670 SKU: 6780670-Tungaloy Manufacturer SKU: TUN6780670 Label: WNMG080412-AM T9225 Model series: ISO turning indexable inserts Material: Carbide Application: Turning Facts Corner radius: 1.2 mm Cutting angle: 80° Clearance angle: 0° Thickness: 4.76 mm Size: 08 Hole: with hole Hole style: cylindrical hole Special features CVD-coated carbide grade T9225 Chipbreaker: AM Trigon plate form (WNMG) ISO-standard geometry for holder compatibility Robust universal grade for medium to heavy steel turning FAQ What materials is this insert best suited for? The Tungaloy WNMG080412-AM T9225 insert is optimised for medium to heavy steel machining thanks to its CVD-coated carbide grade. How does the chipbreaker influence machining? The AM chipbreaker on this trigon insert promotes controlled chip formation and evacuation under varying cutting conditions for more stable turning operations. Is the insert compatible with standard ISO holders? Yes, the WNMG080412-AM follows ISO-standard geometry; compatibility depends on form, clearance, tolerance class, clamping and plate thickness. What advantage does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength for moderate feeds and improves resistance to chipping during interrupted cuts, extending service life. Which product identifiers should be used when ordering? Order using the article number 6780670, the SKU 6780670-Tungaloy or the manufacturer SKU TUN6780670 to ensure the correct turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9225 Wendeplatten - Tungaloy
WNMG080412-SW T9225 ISO-Drehwendeschneidplatte für Drehen – Tungaloy WNMG080412-SW T9225 dient der robusten Außen- und Innendrehung bei mittleren bis schweren Schnittbedingungen CVD-beschichtetes Hartmetall für hohe Standzeit Universalsorte T9225 für wechselnde Schnittbedingungen Trigon-Form 80° für stabile Einspanung Eckenradius 1.2 mm für zuverlässige Kantentragfähigkeit Mit zylindrischem Loch zur sicheren Befestigung Robuste Universalsorte für anspruchsvolle Stahlbearbeitung Die WNMG080412-SW T9225 ist eine ISO-genormte Drehwendeschneidplatte, die speziell für die mittlere bis schwere Stahlbearbeitung entwickelt wurde. Die Kombination aus Hartmetall-Substrat und CVD-Beschichtung sorgt für verlängerte Werkzeugstandzeiten und hohe Verschleißfestigkeit. Der Eckenradius 1.2 mm stabilisiert die Schneidkante und reduziert Gratbildung, was die Nachbearbeitung minimiert und die Produktivität auf der Maschine erhöht. Systemkompatibilität und sichere Montage Die trigonale Plattenform mit einem Winkel von 80° ermöglicht kompakte Einspannungen und stabile Schnittbedingungen. Die Kompatibilität zum Halter wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt; deshalb ist die richtige Auswahl von Halter und Unterlage entscheidend für reproduzierbare Ergebnisse. Die Ausführung mit zylindrischem Loch vereinfacht die Befestigung und erhöht die Wiederholgenauigkeit beim Plattenwechsel. Beschichtung und Materialnutzen erklärt Die Sorte T9225 kombiniert ein zähes Substrat mit einer CVD-Beschichtung (chemische Gasphasenabscheidung), die Wärmebeständigkeit und Verschleißschutz verbessert. Für Anwender bedeutet das: weniger Werkzeugwechsel bei wechselnden Eingriffsbedingungen und bessere Prozessstabilität bei leicht unterbrochenem Schnitt. Kurz: höhere Maschinenlaufzeiten und geringere Stückkosten bei Serienfertigung. Einsatzbereich und Zielgruppe Diese Wendeschneidplatte eignet sich für Lohnfertiger, Maschinenbauer und industrielle CNC-Anwender, die Drehen an Stahlkomponenten wirtschaftlich durchführen wollen. Für Außen- und Innendrehaufgaben empfiehlt sich die Abstimmung von Spanbrecher und Sorte auf Werkstoff und Bearbeitungsart, damit die Spanbildung kontrolliert bleibt und die Oberflächengüte stimmt. Die Platte unterstützt produktive Zerspanung und konstante Ergebnisqualität. Für wirtschaftliche Stahlzerspanung empfiehlt Metav Werkzeuge die WNMG080412-SW T9225 von Tungaloy – technische Beratung unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6780677 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-SW Daten Eckenradius: 1.2 mm Plattendicke: 4,76 mm Winkel: 80° Plattengröße: 08 Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung) Sorte: T9225 Spanbrecher: SW (optimierte Spanformer) Plattenform: Trigon Lochstil: zylindrisches Loch Einsatz: Drehen Norm: ISO-genormt (kompatible Bauform) FAQ Welche Anwendungen deckt die WNMG080412-SW T9225 ab? Die WNMG080412-SW T9225 von Tungaloy ist für Außen- und Innendrehen konzipiert und deckt insbesondere mittlere bis schwere Stahlbearbeitungen ab, bei denen wechselnde Eingriffsbedingungen oder leicht unterbrochene Schnitte erhöhte Zähigkeit erfordern. Welche Vorteile bietet die CVD-Beschichtung bei dieser Platte? Die CVD-Beschichtung der WNMG080412-SW T9225 verbessert die Wärmebeständigkeit und Verschleißfestigkeit, reduziert Werkzeugwechsel und erhöht die Prozesssicherheit bei Serienläufen auf CNC-Drehmaschinen. Wie wird die Kompatibilität mit dem Halter sichergestellt? Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; bei der WNMG080412-SW T9225 ist die trigonale Form und das zylindrische Loch auf gängige ISO-Außenhalter ausgelegt. Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die WNMG080412-SW T9225 ist als Universalsorte für Stahl ausgelegt; bei Bedarf ist die Auswahl des passenden Spanbrechers und der Schnittdaten an das Werkstoffprofil anzupassen. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 1.2 mm erhöht die Kantentragfähigkeit und verringert Gratbildung, was zu stabileren Schnitten und besseren Oberflächen führt; für feine Schlichtoperationen kann ein kleinerer Radius sinnvoll sein. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade engineered for toughness, ISO compatibility for rapid tool changes, and a robust trigon geometry that supports medium‑to‑heavy steel turning; order directly via Metav Werkzeuge or contact the consultants for tailored machining advice. WNMG 080412 T9225 — ISO turning insert (trigon, THS) by Tungaloy The WNMG080412-THS T9225 is a trigon ISO turning insert designed for medium‑to‑heavy steel machining, featuring a CVD‑coated carbide grade that balances toughness and wear resistance for interrupted and variable engagement conditions. CVD-coated carbide grade T9225 Robust universal grade for medium‑heavy steel Trigon shape, 80° geometry for versatile turning 1.2 mm corner radius with cylindrical hole Reliable cutting performance where conditions vary The combination of a CVD‑coated carbide base and the T9225 grade provides increased toughness compared with uncoated grades, which translates into fewer edge failures under changing engagement or slightly interrupted cuts. This indexable insert is optimised for consistent metal removal in steel turning, offering improved tool life and predictable tool changes. The wear properties of the coating reduce flank wear and help maintain dimensional accuracy over longer production runs, so machining stability is improved with fewer unexpected interruptions. Fast replacement and assured seat fit for efficient workflows Produced to ISO dimensions, the insert ensures compatibility with standard external holders and boring bars; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. This standardisation enables quick swaps and reduces set‑up time on the shop floor. The trigon outline and central cylindrical hole give secure clamping, while the defined thickness and tolerance allow reliable seating and repeatable positioning, which supports consistent workpiece finish and lowered scrap rates in serial turning operations. Geometry tailored to strength and application choice The trigon plate with an 80° cutting edge and 0° clearance angle gives a robust primary cutting edge suitable for external and internal turning where strength is required. The 1.2 mm corner radius improves edge support for roughing passes and moderate finishing, while the THS chipbreaker is matched to the grade for controlled chip formation in general steel applications. With a plate thickness of 4.76 mm the insert offers solid edge stability; the presence of a cylindrical hole assists secure fixation and repeatability when combined with the correct clamp and screw set. Select the chipbreaker and grade according to workpiece material and machine/rigidity for optimal results. Contact Metav Werkzeuge for application guidance on the Tungaloy T9225 grade, to confirm holder compatibility or to request delivery; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781274 SKU: 6781274-Tungaloy Manufacturer SKU: TUN6781274 Material: carbide Model series: ISO turning indexable inserts Facts Size designation: 08 ISO designation: WNMG080412-THS Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Wedge angle: 80° Special features Grade: T9225 Coating: CVD Chipbreaker: THS Shape: trigon Hole: cylindrical Application: turning Typical use: medium‑to‑heavy steel machining FAQ What materials is this insert suited for? The Tungaloy WNMG080412-THS T9225 is formulated as a robust universal grade primarily for steel, and it performs well in medium‑to‑heavy turning where variable engagement or slight interruptions occur. Is the insert compatible with standard ISO holders? Yes, the indexable insert follows ISO dimensions; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Which chipbreaker is fitted and what does it do? The insert features a THS chipbreaker, which is designed to produce consistent chips and improve control during general turning operations in steel. How does the corner radius affect machining? The 1.2 mm corner radius provides enhanced edge strength for roughing and moderate finishing passes, reducing the risk of edge chipping under heavier cuts. What is the manufacturer article number and SKU? Manufacturer article number 6781274; SKU 6781274‑Tungaloy; manufacturer SKU TUN6781274. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust wear resistance, reliable chip control and ISO compatibility for efficient medium‑to‑heavy turning operations; order the WNMG080412-TSF T9225 insert directly via Metav Werkzeuge or consult the technical team for application support. WNMG 080412 T9225 ISO turning insert (trigon, 80°) by Tungaloy The WNMG 080412 T9225 is an ISO‑standard trigon turning insert designed for medium to heavy steel turning, equipped with a TSF chipbreaker for reliable performance under varying engagement conditions. Trigon insert, 80° geometry CVD-coated carbide grade T9225 TSF chipbreaker for interrupted cuts Compatible with ISO turning holders More cuts per tool life thanks to wear‑resistant coating and robust grade The insert is supplied in a CVD‑coated carbide formulation and the T9225 grade provides a measured balance between toughness and wear resistance. The coating enhances surface hardness and thermal protection, which leads to extended edge life under the cyclic loads typical of medium‑to‑heavy steel machining. That means fewer indexings and longer uninterrupted production runs, supporting a more economical process with predictable tool change intervals. Stable chip control reduces stoppages and improves cycle time The integrated TSF chipbreaker is developed for consistent chip control during both continuous and interrupted cuts, promoting safe evacuation and reduced rework. In practice, this stabilises the cutting process and lowers the risk of built‑up edge or entanglement, which contributes to fewer unscheduled stops and higher overall throughput. For operations with variable engagement or marginal stability, the chipbreaker geometry helps maintain productivity with reliable chip segmentation. Geometry engineered for dimensional stability and secure clamping The trigon shape with 80° geometry and a 1.2 mm radius offers a robust edge form that resists chipping while still delivering acceptable surface finish in finishing passes. The insert features a cylindrical hole for secure seat and fixation; correct holder selection ensures the 0° relief angle and plate thickness of 4.76 mm are matched for optimum tolerance and rigidity. These design choices support repeatable part accuracy and reduce vibration‑induced wear on both tool and spindle. ISO conformity and straightforward integration into existing tool systems As an ISO‑standard turning insert, compatibility with a wide range of external holders is assured when form, relief, tolerance class, fixation and thickness are matched. The grade and chipbreaker combination make this insert suitable where robustness and versatility are required rather than ultra‑fine finishing. Backed by Tungaloy’s production standards, the insert is positioned as a practical choice for shops seeking a balance of compatibility and performance across multiple steel machining tasks. For tailored advice on integrating the WNMG 080412 T9225 insert from Tungaloy into specific turning applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application recommendations and availability. Technical Data Article number: 6780928 Manufacturer article number: 6780928 Manufacturer SKU: TUN6780928 SKU: 6780928-Tungaloy Model series: ISO turning inserts Insert designation: WNMG080412-TSF Core specifications Insert size: 08 ISO code: 080412 Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Lead angle: 80° Hole: with cylindrical hole Materials & features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: TSF Shape: trigon Application: turning (external and internal) Compatibility: ISO turning holders FAQ What materials is this insert intended for? The WNMG 080412 T9225 insert is formulated as a robust universal grade for steel machining, particularly suited to medium and heavy cuts where toughness and wear resistance are required. How does the TSF chipbreaker affect performance? The TSF chipbreaker on this insert improves chip segmentation and evacuation, making the insert appropriate for interrupted cuts and variable engagement where stable chip control reduces stoppages. Which holders are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, fixation method and thickness; the WNMG080412‑TSF is designed for ISO‑standard turning holders that accept trigon inserts with the stated dimensions. What benefits does the CVD coating provide? The CVD coating increases surface hardness and thermal resistance, which extends edge life during heavier cutting conditions and contributes to more consistent tool performance over time. Can this insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when paired with an appropriate holder and when process stability is ensured. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080412 T9225 Wendeplatten - Tungaloy
WNMG 080412 T9225 Drehwendeschneidplatte zum Drehen von Tungaloy WNMG080412-ZM T9225 ist eine ISO-genormte Wendeschneidplatte für Außen- und Innendrehen in der Stahlbearbeitung CVD-beschichtetes Hartmetall für robuste Zerspanung Universalsorte für mittlere bis schwere Stahlbearbeitung Trigonform mit 80° Winkel für stabile Schneidlage Eckenradius 1,2 mm für präzise Kantenausbildung Mit zylindrischem Loch für sichere Befestigung Hohe Wirtschaftlichkeit bei schwankenden Schnittbedingungen Die WNMG080412-ZM T9225 verbindet CVD-beschichtetes Hartmetall mit einer universellen Sortencharakteristik, die speziell für mittlere bis schwere Stahlbearbeitung ausgelegt ist. Die Sortenkennzeichnung T9225 steht für erhöhte Zähigkeit bei wechselnden Eingriffsbedingungen und leicht unterbrochenem Schnitt, was die Standzeit verlängert und Rüstzyklen reduziert. Anwender profitieren von gleichbleibender Produktivität und weniger Werkzeugwechsel in der Serienfertigung. Stabilität durch trigonal geformte Platte und robuster Geometrie Die trigonal geformte Wendeschneidplatte mit 80° Anstellwinkel und einer Plattendicke von 4,76 mm sorgt für eine stabile Schneidlage und gute Schwingungsdämpfung. Der Eckenradius 1,2 mm ermöglicht exakte Kantenausbildung und konstante Oberflächengüte bei Außen- und Innendrehprozessen. Das zylindrische Befestigungsloch garantiert eine präzise und wiederholgenaue Montage im Halter, was Einrichtzeiten verringert. Einsatzempfehlung für effiziente Stahlzerspanung Die Platte ist ideal für Anwendungen im Außen- und Innendrehen auf Stahlwerkstoffen geeignet; der ZM-Spanbrecher unterstützt kontrollierte Spanbildung und reduziert den Grat. Für unterschiedliche Werkstückaufbauten empfiehlt sich die Auswahl von Spanformer und Haltergeometrie entsprechend der Stabilität des Aufbaus. Kurz: die Kombination aus Sortenstärke und geometrischer Robustheit ermöglicht wirtschaftliche Bearbeitungsstrategien. Systemintegration und Kompatibilitätsprüfung Als ISO-genormte Wendeschneidplatte ist die Kompatibilität zum Halter durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Vor der Integration sollte die Übereinstimmung mit dem Werkzeugsystem geprüft werden, insbesondere Freiwinkel und Lochstil. Der Systemaufbau umfasst die ISO-Drehplatte, passenden Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben, was die Ersatzteilbeschaffung vereinfacht. Empfehlung: Tungaloy WNMG080412-ZM T9225 für produktive Stahlzerspanung direkt bei Metav Werkzeuge anfragen: info@metav-werkzeuge.com · +49 2822 7131930 Produktmerkmale Artikelnummer: 6780918 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-ZM T9225 Hersteller SKU: TUN6780918 Daten Eckenradius: 1,2 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Dampfabscheidung) Sorte: T9225 Spanbrecher: ZM Freiwinkel: 0° Lochstil: zylindrisches Loch Loch: mit Loch Plattenform: trigon Anwendung: Drehen Systemaufbau: ISO-Drehplatte, Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Für welche Werkstoffe ist die WNMG080412-ZM T9225 am besten geeignet? Die WNMG080412-ZM T9225 von Tungaloy eignet sich besonders für mittlere bis schwere Stahlbearbeitung; bei wechselnden Schnittbedingungen bietet die Sorte T9225 erhöhte Zähigkeit und stabile Spanbildung. Welche Vorteile bietet die CVD-Beschichtung bei dieser Wendeschneidplatte? Die CVD-beschichtete Oberfläche erhöht die Verschleißfestigkeit und verbessert die Thermostabilität, was bei längeren Schnittzeiten zu konstanteren Standzeiten und besserer Oberflächengüte führt. Wie wirkt sich der ZM-Spanbrecher auf die Bearbeitung aus? Der ZM-Spanbrecher sorgt für kontrollierte Spanformung und reduziert Gratbildung, was das Spanmanagement im Prozess vereinfacht und Werkzeugstandzeiten verbessern kann. Welche Halterparameter sind vor der Montage zu prüfen? Vor der Montage sind Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Plattendicke zu prüfen, um die Kompatibilität mit dem Halter sicherzustellen und Vibrationen zu vermeiden. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die WNMG080412-ZM T9225 ist sowohl für Außen- als auch für Innendrehoperationen ausgelegt und bietet dabei stabile Schneideigenschaften bei verschiedenen Eingriffsbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9225 Wendeplatten - Tungaloy
Benefit from a robust CVD‑coated carbide grade and a 1.2 mm corner radius for stable mid‑to‑heavy steel turning with reduced tool changes; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. WNMG 080412 T9225 — ISO turning insert (triangular, DM chipbreaker) by Tungaloy The WNMG080412-DM T9225 is an ISO‑standard turning insert designed for reliable outside and inside turning in demanding steel applications, offering a balance of toughness and wear resistance for interrupted and variable cutting conditions. CVD-coated carbide for robust performance 1.2 mm corner radius for strength and finish ISO‑standard WNMG 080412 geometry DM chipbreaker optimised for steel turning Consistent cutting in demanding steel turning The combination of a CVD‑coated surface and a carbide substrate in this grade delivers consistent cutting performance under fluctuating engagement conditions. The T9225 grade is engineered as a robust universal solution for mid‑to‑heavy steel machining; its increased toughness reduces the risk of chipping during light interruptions and variable feeds. This results in longer effective tool life and fewer unscheduled tool changes, which supports steady production flow and predictable planning in jobbing and batch operations. Geometry that improves process stability and surface quality The insert’s triangular form with an 80° approach and a 1.2 mm corner radius provides a good compromise between edge strength and surface finish. The 4.76 mm plate thickness and the cylindrical centre hole ensure secure clamping and repeatable positioning in compatible holders. Together, these geometry features contribute to stable cutting forces, improved dimensional control and consistent surface results on the workpiece, especially when machining medium to heavy cross sections of steel. Simple system integration for fast tool changes Being an ISO‑standard WNMG insert, the unit integrates into common turning systems where compatibility is dictated by form, relief angle, tolerance class, clamping method, size and thickness. The WNMG080412-DM T9225 works with standard external holders and boring bars designed for size 08 trigonal inserts and uses conventional clamping plates and screws, enabling straightforward changeovers and stock rationalisation in mixed‑machine shops. Clear identification of the insert geometry accelerates selection and reduces setup time. Durable coating and economical operation The T9225 CVD coating is selected to withstand thermal and abrasive loads typically encountered in steel turning, improving flank wear resistance and enabling stable metal removal rates. With the DM chipbreaker tailored to steel turning, chips are managed effectively across a range of feeds, which can reduce downtime caused by chip control issues. The result is a favourable balance between tool life and machining productivity, supporting cost‑efficient operations without compromising component quality. For tailored application advice or to check holder compatibility for the Tungaloy WNMG080412-DM T9225, contact Metav Werkzeuge at info@metav-werkezeuge.com or call +49 2822 7131930 — our consultants will help specify the correct holder and supply options Technical data Article number: 6780942 Manufacturer SKU: TUN6780942 Label: WNMG080412-DM T9225 Series: ISO turning inserts Material: Carbide Facts Corner radius: 1.2 mm Relief angle: 0° Approach angle: 80° Plate thickness: 4.76 mm Size: 08 Hole: cylindrical hole Special features Coating: T9225 (CVD‑coated) Chipbreaker: DM Shape: triangular (trigon) Application: turning; outside and inside turning Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness FAQ Is this insert suitable for interrupted cuts in steel? Yes. The Tungaloy WNMG080412‑DM T9225 is formulated as a robust universal grade for mid‑to‑heavy steel, providing extra toughness to tolerate light interruptions and variable engagement. Which holders are compatible with this insert? Holders designed for WNMG size 08 trigonal inserts with an 80° approach and a cylindrical locating hole are compatible; confirm relief angle and clamping method to match the WNMG080412‑DM geometry. What materials is this grade intended for? The T9225 grade is optimised for mid‑to‑heavy steel machining and performs well where harder engagements or intermittent cuts demand increased toughness. How does the CVD coating benefit machining? The CVD‑type coating on this carbide insert improves wear resistance at elevated cutting temperatures and enhances edge life, allowing more consistent metal removal before re‑indexing or replacement is required. What effect does the 1.2 mm corner radius have on results? A 1.2 mm corner radius increases edge strength for stable cutting in heavier cross sections while still delivering acceptable surface finish, balancing durability and component quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9235 Wendeplatten - Tungaloy
Take advantage of robust CVD-coated carbide and a trigon geometry that delivers stable results in interrupted and unstable turning conditions; order supply and accessories through Metav Werkzeuge or consult the technical team for compatibility and selection advice. WNMG 080412 T9235 — Indexable Turning Insert by Tungaloy (Trigon, TSF) WNMG080412-TSF T9235 is an ISO-format indexable turning insert designed for external and internal turning in steel applications, offering a tough, CVD-coated carbide grade for challenging cuts. *Trigon insert WNMG 080412 with cylindrical hole *CVD-coated carbide grade T9235 for steel *1.2 mm corner radius for stable turning *Compatible with ISO toolholders and clamping sets Higher process reliability in unstable cutting conditions The CVD-coated carbide grade T9235 is formulated as a tough option for machining steel where cutting speeds are moderate and interruptions or vibration are likely. The coating improves resistance to flank wear and helps extend edge life under fluctuating loads, so fewer index changes are required and productive uptime increases. The overall effect is predictable tool performance and reduced scrap rates when facing non-ideal clamping or workpiece support. Designed for ISO tool systems and straightforward integration As part of an ISO insert family, compatibility is governed by form, clearance, tolerance class, fastening method, size and thickness. The insert integrates easily into standard holder systems when paired with the correct shim or clamping set, and the TSF chipbreaker should be chosen to match workpiece material and machining strategy. This structured approach streamlines set-up, shortens tool-change routines and supports consistent surface quality across serial production. Geometry that balances strength and cutting control The trigon form provides a secure seating and multiple indexed corners, while the 80° wedge angle delivers a robust cutting edge for general turning. A 1.2 mm corner radius combines edge strength with acceptable profile control, and the 4.76 mm plate thickness enhances resistance to bending under radial loads. The 0° clearance contributes to a neutral seating angle that suits stable finishing and semi-finish passes, and the cylindrical hole ensures precise locating and secure fastening in the clamp. Practical system considerations and maintenance benefits The supply concept includes the indexable insert together with a matching holder or boring bar, a backing shim/clamping set and replacement screws as required by the tool system. Keeping a consistent chipbreaker and grade selection across similar parts minimises set-up complexity and inventory variety. Where intermittent cutting or part runout is present, the tough grade choice reduces the risk of edge chipping and the frequency of unscheduled insert exchanges, improving overall machining economics. Contact Metav Werkzeuge for tailored recommendations on Tungaloy indexable inserts, compatible toolholders and clamping components via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786027 Manufacturer SKU: TUN6786027 SKU: 6786027-Tungaloy Label: WNMG080412-TSF T9235 Model series: ISO turning inserts Facts Corner radius: 1.2 mm Thickness: 4.76 mm Insert size: 08 ISO code: 080412 Clearance angle: 0° Angle: 80° Special features Carbide material CVD coating, grade T9235 Chipbreaker TSF Trigon insert form Cylindrical hole Application: Turning Compatible with ISO holders, shims and screws FAQ What materials is this insert best suited for? The WNMG080412-TSF T9235 is intended primarily for steel; the T9235 grade is optimised for tougher cutting conditions at moderate speeds. Is the insert compatible with standard ISO holders? Yes, the insert fits ISO holders that match the form, size and fastening specifications; use the correct shim/clamping set and screws for secure mounting. Which chipbreaker should be selected for roughing interrupted cuts? The TSF chipbreaker supplied with this insert is designed for stable chip control in many turning tasks; pairing it with the T9235 grade helps resist edge chipping during interrupted cuts. How often should the insert be indexed or replaced in serial production? Indexing frequency depends on workpiece material and cutting parameters; the CVD-coated T9235 grade is chosen to extend edge life under unstable conditions, reducing indexing compared with uncoated grades. Does the insert require specific backing or clamping components? A matching backing shim and clamping set are recommended for correct seating; the system build typically comprises the ISO insert, a suitable external holder or boring bar, the shim/clamping set and replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade tuned for tough steel and a robust 1.2 mm corner radius for reliable performance in interrupted cuts; the trigon form and cylindrical hole ensure secure clamping in ISO holders. Order the insert directly via Metav Werkzeuge or consult the technical team for matching advice. WNMG 080412 T9235 – CVD-coated carbide ISO turning insert, trigon, by Tungaloy WNMG080412-AS T9235 is a trigon ISO turning insert engineered for external and internal turning of steel under unstable or interrupted cutting conditions CVD-coated carbide T9235 for tough steel Trigon form for stable external and internal turning 80° cutting angle with 1.2 mm corner radius Cylindrical mounting hole for secure clamping Robust cutting performance where stability is limited The CVD-coated carbide composition and the T9235 grade are designed to deliver toughness and wear resistance when turning steel at moderate speeds or under interrupted cuts. The coating improves surface hardness and thermal stability, helping to reduce flank wear and microchipping during challenging operations. This combination supports consistent cutting forces, which leads to steadier results and fewer tool changes in short production runs. The hardened edge geometry and coating together help maintain surface quality on the workpiece while the insert resists premature breakdown under shock loads. Clear compatibility and safe clamping for productivity Compatibility with a toolholder is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the trigon form and cylindrical hole of this insert provide a positive datum for secure clamping. The plate thickness of 4.76 mm and the 0° relief angle are typical for ISO holders that accept WNMG-style inserts; correct selection of the matching external holder or boring bar and the appropriate clamping set ensures repeatable location and torque distribution. Choosing the chipbreaker type AS and the T9235 grade according to the workpiece material and machining stability reduces the risk of built-up edge and improves chip control. Economic and process benefits from thoughtful geometry The 1.2 mm corner radius and the 80° cutting angle create a robust cutting edge that tolerates interrupted engagement and offers a balance between edge strength and surface finish. In practice, the radius stabilises the cut, diminishing vibration sensitivity and extending useful tool life in unstable setups. The trigon shape allows multiple indexings per insert, supporting economical use of the carbide body. Taken together, the geometry, coating and grade contribute to lower tooling downtime and more predictable machining results, supporting process reliability on short runs and maintenance intervals. Ask Metav Werkzeuge for technical matching and prompt supply of the Tungaloy WNMG080412-AS T9235 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785970 Manufacturer SKU: TUN6785970 Manufacturer item number: 6785970 Model series: ISO turning inserts Name: WNMG080412-AS T9235 Numbers / Core data Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 80° Size: 08 Relief angle: 0° Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD-coated Grade: T9235 (tough grade for steel) Chipbreaker: AS Plate form: trigon Suitable for: external and internal turning Mounting: cylindrical hole Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness Manufacturer: Tungaloy FAQ Which materials is this insert designed for? The WNMG080412-AS T9235 insert is specified for machining steel; the T9235 grade is a tough, CVD-coated carbide suitable for lower cutting speeds and interrupted conditions when turning steel. Is the insert suitable for interrupted cuts and unstable setups? Yes. The T9235 grade combined with the 1.2 mm corner radius and CVD coating provides resilience for interrupted cuts and less stable conditions common in external and internal turning. How is the insert clamped in the holder? The trigon plate features a cylindrical mounting hole and is designed for secure clamping in compatible ISO holders; correct pairing of holder form and clamping set ensures repeatable positioning and torque transmission. What does the chipbreaker AS offer? The AS chipbreaker on this trigon insert is intended to promote controlled chip formation for many turning tasks on steel, aiding chip evacuation and reducing the likelihood of built-up edge under variable cutting conditions. Which parameters should be checked before fitting this insert? Confirm holder compatibility with the insert form, relief angle (0°), plate size (08), thickness (4.76 mm) and the cylindrical hole arrangement; selecting the right holder and clamping hardware prevents misalignment and ensures safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated carbide grade, a robust chipbreaker TS, and ISO conformity for dependable turning performance. The insert delivers practical advantages in interrupted cuts and unstable set-ups; order the WNMG080412-TS T9235 directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080412 T9235 — ISO turning insert, trigon, CVD-coated carbide (Tungaloy) The WNMG080412-TS T9235 is a trigon ISO turning insert designed for external and internal turning, offering a tough CVD-coated carbide grade for stable chip control in difficult steel applications ISO‑standard trigon insert CVD-coated carbide grade T9235 Corner radius 1.2 mm for robust cutting Cylindrical hole, 80° cutting angle Consistent cutting performance where interrupted cuts occur The insert is engineered for reliable material removal when conditions are far from ideal. Thanks to the CVD-coated carbide and the dedicated chipbreaker TS, this grade is formulated as a tough option for machining steel at lower cutting speeds and under interrupted cutting regimes. The combination of a corner radius 1.2 mm and a trigon geometry provides a balance between edge strength and accessibility, reducing the risk of premature edge failure and supporting longer in-process life spans. Emphasis is placed on measurable productivity: greater edge robustness reduces tool changes and supports steadier cycle times. Clear fitment rules and ISO compatibility to simplify tooling decisions Compatibility is determined by insert form, clearance angle, tolerance class, fixation and thickness; the ISO standard designation makes matching to approved external holders straightforward. The trigon plate with a cylindrical hole and a clearance angle 0° allows reliable clamping and orientation in standard toolholders, while the nominal 80° cutting angle is suited to general-purpose turning. This clarity reduces set-up time and helps maintain process stability: selecting the correct insert variant and holder combination translates directly into safer clamping, predictable runout and repeatable results on batch jobs. Practical advantages for workshop productivity and process security In everyday production the focus is on turning parts quickly without compromising surface quality. The hardy coating and substrate chemistry in this grade support machining of steel where vibration or recurring interruptions occur, giving shops improved tolerance to shock loads at the cutting edge. The insert’s trigon shape and chipbreaker TS promote consistent chip formation, easing chip evacuation and lowering the chance of built-up edge. For operations that prioritise throughput and repeatability, this solution blends robustness with the practical benefit of broad compatibility across ISO holders. For precision turning tasks where stability under interrupted cuts is required, contact Metav Werkzeuge to discuss the WNMG080412-TS T9235 and arrange supply or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785971 SKU: 6785971-Tungaloy Manufacturer SKU: TUN6785971 Brand: Tungaloy Model designation: WNMG080412-TS T9235 Category: Turning inserts Core specifications Corner radius: 1.2 mm Clearance angle: 0° Cutting angle: 80° Insert size: 08 Plate thickness: 4.76 mm Hole: cylindrical Special features Trigon plate form CVD-coated carbide (T9235) Chipbreaker: TS Suitable for steel turning Designed for interrupted cuts and unstable conditions ISO-compatible insert series FAQ What materials is this insert suitable for? The WNMG080412-TS T9235 is specified for machining steel; the T9235 grade is a tough, CVD-coated carbide designed to handle interrupted cuts and less stable cutting conditions. How does the chipbreaker TS benefit production? The chipbreaker TS promotes controlled chip formation and evacuation, reducing chip accumulation and supporting more consistent surface quality during turning operations. Which holder characteristics determine compatibility? Compatibility depends on insert form, clearance angle, tolerance class, fixation, size and thickness; use ISO-compatible toolholders matched to the trigon insert and the specified clearance angle 0°. Is this insert suitable for internal and external turning? Yes, the ISO trigon format and the robust grade make it appropriate for both external and internal turning when matched with the correct external holder or boring bar. What is the significance of the corner radius? A 1.2 mm corner radius increases edge strength and resistance to chipping, which is especially useful for interrupted or unstable cuts where edge loading can be variable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9235 Wendeplatten - Tungaloy
WNMG WNMG080412 T9235 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die WNMG080412 T9235 ist eine ISO-genormte, trigonförmige Wendeschneidplatte für Außen- und Innendrehen mit zähem Schneidstoff für stabile Bearbeitung unter instabilen Bedingungen WNMG080412 T9235 von Tungaloy CVD-beschichtetes Hartmetall für zähe Schnitte Trigonform mit zylindrischem Loch Eckenradius 1.2 mm für konstante Spanbildung Doppelseitige Platte, Plattendicke 4,76 mm Hervorragende Werkstoffanpassung durch CVD-beschichtung Die Wendeschneidplatte basiert auf Hartmetall mit einer CVD-Beschichtung, wodurch die Schneidkante gegen Verschleiß geschützt wird und die Standzeit steigt. Die Sorte T9235 ist gezielt für Stahl ausgelegt und zeigt ihre Stärken bei niedrigen Schnittgeschwindigkeiten sowie bei stark unterbrochenen Schnitten. Für Anwender bedeutet das: weniger Werkzeugwechsel, geringere Ausfallzeiten und planbare Produktionskosten. ISO-Norm und Systemverfügbarkeit für sichere Prozessführung Als ISO-genormte Wendeplatte lässt sich die Platte unkompliziert in passende Außenhalter oder Bohrstangen integrieren, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke die Kompatibilität bestimmen. Die trigonförmige Ausführung mit zylindrischem Loch ermöglicht einfache Montage und präzise Lage im Halter. Durch diese Systemkompatibilität erhöht sich die Prozesssicherheit bei Serien- und Einzelteilfertigung. Produktivität durch Geometrie und Aufbaumerkmale Der Eckenradius von 1.2 mm, die Plattendicke 4,76 mm und der Freiwinkel 0° sorgen für stabile Spanbildung und belastbare Schneidkanten, selbst bei instabilen Lagerungen oder unterbrochenem Schnitt. Die doppelseitige Ausführung macht die Platte wirtschaftlich, da beide Schneiden genutzt werden können. Anwender profitieren von konstanter Oberflächengüte und reduzierten Werkzeugkosten pro Werkstück. Einsatzspektrum, Anwendernutzen und kurze Erläuterung Diese Platte richtet sich an Zerspanungsbetriebe, Werkzeugmaschinenbetreiber und den Instandhaltungsbereich, die produktiv Stahl bearbeiten wollen. Die CVD-Beschichtung ist eine Schichtbildung durch chemische Gasphasenabscheidung, die hohe Härte mit guter Haftung kombiniert und so die Standzeit verbessert. Durch die Auswahl eines passenden Spanbrechers lässt sich der Chipfluss für unterschiedliche Bearbeitungsbedingungen optimieren. Empfehlung: Die WNMG080412 T9235 von Tungaloy für anspruchsvolle Stahlbearbeitung anfragen und technische Beratung bei Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 einholen Produktmerkmale Artikelnummer: 6785848 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412 T9235 Daten Eckenradius: 1.2 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (zähe Sorte) Plattenform: trigon Loch: mit Loch (zylindrisches Loch) Spanbrecher: doppelseitig Anwendung: Drehen Einsatz: ISO-genormte Drehwendeschneidplatten; Außen- und Innendrehen FAQ Für welche Materialien ist die Platte besonders geeignet? Die WNMG080412 T9235 von Tungaloy ist optimiert für die Bearbeitung von Stahl; die zähe T9235-Sorte und die CVD-Beschichtung reduzieren Ausbrüche bei instabilen Bedingungen und unterbrochenem Schnitt. Welche Vorteile bietet die trigonform gegenüber runden Platten? Die Trigonform ermöglicht mehrere Wendungen und eine kompakte Spannfläche im Halter, was die Flexibilität beim Einrichten erhöht und die Standzeit pro Plattentausch verbessert. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 1.2 mm fördert eine stabile Spanbildung und trägt zu konstanter Oberflächengüte bei, insbesondere bei mittleren Schnittwerten und variierenden Vorschüben. Ist die Platte für instabile Bedingungen geeignet? Ja, die T9235-Sorte wurde für niedrigere Schnittgeschwindigkeiten und instabile Bedingungen entwickelt und bietet daher hohe Prozesssicherheit bei unterbrochenen Schnitten. Welche Rolle spielt das zylindrische Loch? Das zylindrische Loch vereinfacht die Positionierung und Befestigung im Halter und sorgt für präzise Lage und wiederholgenaue Spannwerte beim Indexieren. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 1.2 mm corner radius for robust edge life, and ISO conformity for predictable holder compatibility; order the WNMG080412-TM T9235 directly via Metav Werkzeuge or ask the consultants for application guidance. WNMG080412-TM T9235 — ISO turning insert for steel turning, CVD‑coated carbide, TM chipbreaker (Tungaloy) The WNMG080412-TM T9235 is an ISO turning insert designed for external and internal turning of steel, providing stability in interrupted and less stable cutting conditions. CVD-coated carbide for tough steel applications Optimised TM chipbreaker for interrupted cuts 1.2 mm corner radius for robust edge strength ISO WNMG080412 form with 0° clearance angle Consistent cutting performance for steel turning The WNMG080412-TM T9235 grade uses a CVD-coated carbide substrate engineered for tough steel applications at moderate cutting speeds. The coating improves resistance to abrasive wear and reduces built-up edge, which translates into longer tool life and more consistent part quality during production runs. For batch production and repair work where stability varies, the combination of substrate and coating supports reduced regrind cycles and predictable process windows, helping to maintain cycle times and lower overall machining costs. Stable results in interrupted and unstable conditions Designed with the TM chipbreaker and a 1.2 mm corner radius, this insert manages chip formation and edge strength in interrupted cuts. The chipbreaker geometry promotes controlled chip separation, reducing the risk of entanglement and fragile edge chipping under shock loads. The 0° clearance angle contributes to axial stability in heavy engagement situations while the corner radius balances toughness and finish, yielding reliable dimensional repeatability and improved surface integrity on turned components. Seamless integration into ISO-based tool systems Conforming to ISO dimensions and the WNMG form, the insert features a cylindrical hole for secure clamping and a plate thickness of 4.76 mm, ensuring compatibility with standard external holders and boring bars. System assembly typically comprises the ISO insert, a matched holder or bar, a support pad/clamping set and replacement screws; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The standardised format simplifies tooling logistics and spare-part management across multi-machine shops while enabling quick insert changes to keep set-up times to a minimum. For application-specific recommendations or to request supply of Tungaloy WNMG080412-TM T9235 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and availability. Technical Data Article number: 6785800 SKU: 6785800-Tungaloy Manufacturer article number: 6785800 Model series: ISO‑Drehwendeschneidplatten Material: Carbide (Hartmetall) Facts Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Size: 08 ISO code: 080412 Hole: with cylindrical hole Chipbreaker: TM Special features CVD-coated carbide grade T9235 Intended application: Turning (Drehen) of steel ISO‑standardised WNMG form Trigon plate shape Compatibility determined by form, clearance, tolerance, fastening, size and thickness Designed for interrupted and unstable cutting conditions FAQ What materials is this insert suitable for? The T9235 grade of the WNMG080412-TM insert is engineered primarily for steel machining, providing toughness and wear resistance for a broad range of steel alloys. Is the insert suitable for interrupted cuts? Yes, the TM chipbreaker and the 1.2 mm corner radius of the WNMG080412-TM are tailored to manage chip formation and edge stability during interrupted and unstable cuts. Which holder types are compatible with this ISO insert? Compatibility is defined by the ISO WNMG form and the insert’s dimensions; holders or boring bars that accept WNMG inserts with a cylindrical hole and matching thickness (4.76 mm) are suitable. How does the coating affect performance? The CVD coating on this insert reduces abrasive wear and built-up edge formation, enhancing tool life and consistent surface finish when turning steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade optimised for steel, a robust 1.2 mm corner radius and a trigon form that ensures reliable performance in interrupted or unstable turning operations; order via Metav Werkzeuge or consult our specialists for compatibility guidance. WNMG 080412 T9235 – ISO turning insert for external and internal turning (Tungaloy) The WNMG 080412 T9235 is an ISO-indexed trigon insert designed for turning steel components where interrupted cuts or unstable conditions demand a tough, reliable grade. CVD-coated carbide grade T9235 Trigon form for versatile holder compatibility 1.2 mm corner radius for robust edge life Suitable for unstable and interrupted cuts Engineered to deliver consistent chip control and tool life The insert combines a CVD-coated surface with a carbide substrate to offer a balance of wear resistance and edge toughness; this makes the grade particularly suited to steel machining at moderate cutting speeds. The T9235 composition is formulated for durability under vibration and shock, which reduces the risk of premature edge chipping. By choosing a tough grade rather than a highly abrasive one, longer effective tool life in unstable setups can be achieved, reducing downtime and part rejects while maintaining acceptable surface finish. ISO compatibility that simplifies setup and interchangeability Manufactured to ISO form and tolerance, the trigon geometry and cylindrical hole enable straightforward clamping in a wide range of external holders and boring bars. Compatibility depends on insert form, relief angle and size, so the standardised format streamlines tool changeovers on mixed-machine floors. The 0° clearance and triangular outline offer predictable seating and repeatable orientation, which aids process repeatability. This predictability supports faster set-ups and simplifies inventory management across ISO families of toolholders. Designed for stability in interrupted and challenging cuts A 1.2 mm corner radius provides a robust cutting edge that resists fracture when encountering interruptions, edges or varying material hardness in steel workpieces. The NM chipbreaker profile assists with controlled chip formation in common turning operations, lowering the chance of long, entangling chips and improving surface integrity. Together, the geometry and grade improve process stability, allowing for conservative increases in material removal rate under monitored conditions and thereby supporting productivity improvements without sacrificing component quality. For tailored advice on using Tungaloy T9235 inserts in specific turning applications, or to confirm holder compatibility, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and procurement options Technical data Article number: 6786030 Manufacturer SKU: TUN6786030 SKU: 6786030-Tungaloy Model series: ISO turning indexable insert series Designation: WNMG080412-NM T9235 Material: carbide Manufacturer: Tungaloy Application: Turning Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Insert size: 08 Relief angle: 0° Included angle: 80° Hole: with cylindrical hole Special features CVD coating Grade T9235 – tough for steel at lower cutting speeds Trigon insert form NM chipbreaker for controlled chips ISO-compliant insert family Compatible with external holders and boring bars (form, clearance, tolerance class, fastening, size and thickness determine fit) FAQ What materials is this insert intended for? The T9235 grade is formulated primarily for machining steel; the CVD-coated carbide substrate delivers toughness suited to a wide range of steel alloys. Is the insert compatible with ISO holders? Yes, the insert follows ISO dimensions and seating form so it is compatible with holders designed for trigon inserts that accept the 08 size and the NM chipbreaker. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and reduces the chance of chipping in interrupted or unstable cuts, improving component finish and tool life. Can this insert handle interrupted cuts and unstable conditions? The combination of the T9235 tough grade, NM chipbreaker and trigon geometry makes the insert suitable for interrupted cutting and less stable machining setups. What should be checked when replacing an insert in an existing holder? Verify holder compatibility by checking form, relief angle, tolerance class, fastening method, size and thickness to ensure correct seating and clamping of the ISO trigon insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 T9235 Wendeplatten - Tungaloy
WNMG 080412 T9235 Drehwendeschneidplatte für Drehen von Tungaloy Die WNMG 080412 T9235 ist eine ISO-genormte Trigon-Wendeschneidplatte für Außen- und Innendrehen, ausgelegt für zähe Stahlbearbeitung unter instabilen Schnittbedingungen. ISO-genormte Trigon-Platte für universellen Einsatz CVD-beschichtetes Hartmetall für zähe Stahlbearbeitung Eckenradius 1,2 mm für präzise Schnittführung Mit zylindrischem Loch für sichere Befestigung Kompatibel mit ISO-Außenhaltern und Bohrstangen Hohe Prozesssicherheit bei instabilen Bedingungen Die Wendeschneidplatte überzeugt durch ihre zähe Hartmetall-Qualität und die CVD-Beschichtung, die insbesondere bei geringeren Schnittgeschwindigkeiten und stärker unterbrochenem Schnitt für zuverlässige Standzeiten sorgt. Anwender profitieren von konstanter Schnittführung und reduzierten Stillstandszeiten, weil die Platte stabil spanbildet und so Nacharbeit minimiert. Die Konstruktion als Trigon-Platte ermöglicht bei wechselnden Anwendungen flexible Einsatzmöglichkeiten in der Fertigung. Material und Beschichtung als Kundennutzen Dank des CVD-beschichteten Hartmetalls eignet sich die Platte speziell für die Bearbeitung von Stahl. Die Beschichtung erhöht die Verschleißfestigkeit und reduziert Aufbauschneiden, wodurch die Zerspanungsprozesse wirtschaftlicher werden. Für Anwender bedeutet das weniger Werkzeugwechsel und eine bessere Planbarkeit der Fertigungszyklen, was direkt Kosten senkt und Produktivität steigert. Praktische Einsatzfelder und Zielgruppe Diese Wendeschneidplatte richtet sich an Fertigungsbetriebe, die Außendrehen und Innendrehen an Stahlkomponenten durchführen, sowie an Lohnfertiger mit wechselnden Auftragslagen. Anwender in der Maschinenbau- und Automobilzulieferindustrie profitieren von der robusten Sorte T9235, die speziell für instabile Schnittverhältnisse ausgelegt ist und so die Bearbeitung anspruchsvoller Geometrien ermöglicht. Systemkompatibilität und Montagehinweise Die Kompatibilität zum Halter wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Die Platte verfügt über ein zylindrisches Loch und ist für den Einsatz mit standardisierten ISO-Außenhaltern und Bohrstangen vorgesehen. Bei der Auswahl des Spanbrechers TH und des passenden Halters sind Werkstoff, Bearbeitungsart und Maschinenstabilität zu berücksichtigen, um optimale Schnittergebnisse zu erzielen. Empfehlung: Setzen Sie auf die WNMG 080412 T9235 von Tungaloy für wirtschaftliche und zuverlässige Stahlbearbeitung; bei Fragen zur Anwendung oder zur Halterkompatibilität erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6785852 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-TH Fakten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Plattengröße: 08 ISO-Code: 080412 Winkel: 80° Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (Chemische Gasphasenabscheidung) Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: TH (für instabilen Schnitt und unterbrochene Bearbeitung) Einsatz: Drehen Schneidstoffsorte: T9235 (zähe Sorte für Stahl bei niedrigerer Schnittgeschwindigkeit) FAQ Welche Werkstoffe lassen sich mit der WNMG080412-TH T9235 bearbeiten? Die WNMG080412-TH T9235 von Tungaloy ist optimiert für die Bearbeitung von Stahl; die zähe Sorte T9235 sorgt bei niedrigen Schnittgeschwindigkeiten und unterbrochenem Schnitt für stabile Spanbildung. Wie erkenne ich die Kompatibilität zum Halter? Prüfen Sie Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke der Wendeschneidplatte; die WNMG080412-TH ist als ISO-genormte Trigon-Platte für standardisierte Halter ausgelegt. Welchen Vorteil bietet die CVD-Beschichtung bei dieser Platte? Die CVD-Beschichtung der WNMG080412-TH erhöht die Verschleißfestigkeit und reduziert das Aufbauschneiden, was zu längeren Standzeiten und konstanteren Oberflächen führt. Ist die Platte für instabile Schnittbedingungen geeignet? Ja, die Sorte T9235 und der Spanbrecher TH wurden speziell für instabile Bedingungen und stärker unterbrochene Schnitte entwickelt, um Ausfallzeiten zu minimieren. Welche Befestigungsart hat die Platte? Die WNMG080412-TH verfügt über ein zylindrisches Loch zur sicheren Befestigung in ISO-Haltern und Bohrstangen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9235 Wendeplatten - Tungaloy
WNMG 080412 T9235 Drehwendeschneidplatte für Drehen von Tungaloy WNMG080412-THS T9235 für präzises Außen- und Innendrehen unter instabilen Bedingungen ISO-kompatible Trigonform für standardisierte Halter CVD-beschichtetes Hartmetall für zähen Stahl Eckenradius 1,2 mm für erhöhte Stabilität Mit zylindrischem Loch zur sicheren Befestigung THS-Spanbrecher für unterbrochenen Schnitt Hohe Standzeit durch CVD-beschichtung und zäher Sorte Die WNMG080412-THS T9235 kombiniert CVD-beschichtetes Hartmetall mit einer zähen Schneidstoffsorte, die speziell für Stahl bei geringerer Schnittgeschwindigkeit entwickelt wurde. Durch diese Materialwahl reduziert sich der Verschleiß bei instabilen Schnittbedingungen, was die Werkzeugstandzeit verlängert. Der Einsatz dieser Sorte bringt vor allem dann Vorteile, wenn Unterbrochener Schnitt und schwankende Schnittkräfte auftreten, da die Schneidkante weniger zu Ausbrüchen neigt. Präzision und Verlässlichkeit im Produktionsalltag Der Trigonform sorgt für definierte Kontaktflächen zum Halter; die ISO-Normierung gewährleistet Kompatibilität zu gängigen Außenhaltern und Bohrstangen. Der definierte Freiwinkel 0° und der Eckenradius 1,2 mm bieten eine ausgewogene Mischung aus Schnitthaltigkeit und Kantensicherheit. Für Anwender bedeutet das: konstante Bearbeitungsergebnisse und weniger Unterbrechungen im Fertigungsprozess. Einfache Handhabung und sichere Befestigung Die Platte ist mit Loch ausgeführt; das zylindrische Loch ermöglicht eine reproduzierbare Spannlage in Verbindung mit Unterlage und Klemmsatz. Die Plattendicke 4,76 mm und die standardisierte Größe erleichtern den Austausch und die Bestückung in bestehenden Maschinen. Anwender profitieren von geringem Rüstaufwand und einer schnellen Wiederherstellung der Produktionsfähigkeit nach Plattenwechsel. Geeignetes Einsatzfeld und Zielgruppe Konzipiert für das Drehen von Stahlbauteilen unter realen Werkstattbedingungen, richtet sich dieses Plattenprogramm an Zerspanungsbetriebe, Instandhaltungswerkstätten und Lohnfertiger, die Wert auf Prozesssicherheit und Wirtschaftlichkeit legen. Die Kombination aus Sorte, Spanformer THS und robuster Ausführung unterstützt produktive Zerspanung auch bei schwierigen Schnittbedingungen. Empfehlung: Die Tungaloy Sorte T9235 wählen für zuverlässige Drehprozesse; bei Fragen steht Metav Werkzeuge mit Produktberatung zur Verfügung – E‑Mail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6786052 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: 6786052-Tungaloy Fakten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Winkel: 80° Plattengröße: 08 Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte/Beschichtung: T9235 (zähe Sorte für Stahl) Schneidstofftyp: CVD-beschichtetes Hartmetall Spanbrecher: THS (optimiert für unterbrochenen Schnitt) Plattenform: Trigon Lochstil: zylindrisches Loch Anwendung: Drehen FAQ Was unterscheidet die Sorte T9235 von anderen Sorten? Die Sorte T9235 bietet als CVD-beschichtetes Hartmetall erhöhte Zähigkeit speziell für Stahl, wodurch die Tungaloy Wendeschneidplatte bei instabilen Schnittbedingungen und unterbrochenem Schnitt länger standhaft bleibt. Für welche Werkstoffgruppen ist diese Platte geeignet? Die WNMG080412-THS ist primär für die Bearbeitung von Stahl ausgelegt; die Kombination aus Sorte und Spanformer macht sie besonders geeignet für weniger stabile Schneidbedingungen. Welche Vorteile bringt der THS-Spanbrecher? Der THS-Spanbrecher ist ausgelegt, Spanbildung bei unterbrochenem Schnitt zu kontrollieren und so die Prozesssicherheit sowie die Oberflächenqualität zu verbessern. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 1,2 mm erhöht die Stabilität der Schneidkante und reduziert das Ausbruchrisiko, was zu konstanteren Ergebnissen und längerer Standzeit führt. Ist die Platte mit Standardhaltern kompatibel? Ja, die Platte entspricht ISO-Normen; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 T9235 Wendeplatten - Tungaloy
WNMG 080412 T9235 ISO-Drehwendeschneidplatte für Drehen · Tungaloy Die WNMG080412-ASW T9235 ist eine ISO-genormte Trigon-Wendeplatte, entwickelt für robustes Außen- und Innendrehen bei instabilen Schnittbedingungen und unterbrochenen Schnitten. Wendeplatte Trigonform für universellen Einsatz CVD-beschichtetes Hartmetall für stabile Spanbildung ASW-Spanbrecher optimiert für instabile Schnitte Mit Loch, zylindrisches Loch, einfache Spanntechnik Kompatibel mit ISO-Drehhaltern und Klemmsätzen Hohe Standzeit durch CVD-Beschichtung und Hartmetall Die CVD-beschichtetes Hartmetall-Ausführung ermöglicht eine stabile Spanbildung und reduziert Verschleiß bei wechselnden Schnittbedingungen. Die Sorte T9235 ist als zähe Sorte ausgelegt und bietet deshalb eine erhöhte Bruchfestigkeit bei niedrigerer Schnittgeschwindigkeit. Anwender profitieren von längeren Standzeiten und weniger Werkzeugwechseln, was die Produktivität in der Fertigung steigert. Sicheres Drehen auch bei instabilen Bedingungen Bei stark unterbrochenen Schnitten oder geringerer Aufspannung sorgt der ASW-Spanbrecher für konstante Spanabfuhr und reduziert Vibrationen. Dadurch bleibt die Schneidekante länger intakt und die Oberflächengüte stabil. Diese Wendeplatte ist speziell geeignet, wenn Standzeit und Prozesssicherheit unter schwierigen Bearbeitungsbedingungen entscheidend sind. ISO-Kompatibilität und einfache Systemintegration Die Platte entspricht der ISO-Drehwendeschneidplatten-Norm und ist in der Form, im Freiwinkel, in der Toleranzklasse sowie in Größe und Dicke darauf ausgelegt, sich nahtlos in vorhandene Systeme einzufügen. Die Trigon-Plattenform mit Eckenradius 1.2 mm und Plattendicke 4,76 mm erlaubt unkomplizierten Wechsel auf Außenhaltern oder Bohrstangen; Unterlage, Klemmsatz und Ersatzschrauben komplettieren das System. Wirtschaftlichkeit für Serien- und Einzelteilfertigung Betriebe, die Wert auf zuverlässige Wiederholgenauigkeit und geringe Rüstzeiten legen, finden in dieser Wendeplatte eine wirtschaftliche Lösung. Weniger Ausschuss und längere Standzeiten reduzieren Durchlaufkosten. Die Kombination aus Materialwahl und Geometrie eignet sich besonders für Anwender, die konstante Ergebnisse und geringe Ausfallzeiten benötigen. Empfehlung: Für prozesssichere Drehbearbeitung die WNMG080412-ASW T9235 von Tungaloy verwenden; bei technischen Rückfragen oder Materialabstimmung Beratung unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6785865 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-ASW T9235 Hersteller-SKU: TUN6785865 Fakten Eckenradius: 1.2 mm Plattendicke: 4,76 mm Plattengröße: 08 Winkel: 80° Freiwinkel: 0° Loch: mit Loch (zylindrisches Loch) Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9235 — zähe Sorte für Stahl bei niedrigerer Schnittgeschwindigkeit und instabilen Bedingungen Spanbrecher: ASW — optimiert für instabile Schnitte und unterbrochene Schnitte Plattenform: Trigon Anwendung: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Welche Werkstoffe eignen sich für diese Wendeplatte? Die WNMG080412-ASW T9235 ist primär für Stahl ausgelegt; die Sorte T9235 bietet zähe Eigenschaften, die besonders bei instabilen Bedingungen und unterbrochenen Schnitten Vorteile bringen. Welchen Spanbrecher verwendet die Platte und wozu dient er? Die Platte verfügt über den ASW-Spanbrecher, der die Spanabfuhr bei unsteten Schnittbedingungen verbessert und so die Schneidkante schützt sowie Vibrationen reduziert. Welche Geometrischen Daten sind entscheidend für die Halterkompatibilität? Wichtige Maße sind die Plattengröße 08, die Plattendicke 4,76 mm, der Freiwinkel 0° und der Winkel 80°; diese Werte bestimmen die Passgenauigkeit zum ISO-Drehhalter. Wie trägt die CVD-Beschichtung zur Prozesssicherheit bei? Die CVD-Beschichtung erhöht die Verschleißfestigkeit der Schneidkante und sorgt für konstante Bearbeitungsergebnisse, wodurch Standzeit und Wiederholgenauigkeit verbessert werden. Für welche Bearbeitungsszenarien ist die WNMG080412-ASW T9235 besonders geeignet? Die Platte eignet sich besonders für Außen- und Innendrehen unter instabilen Spannverhältnissen, bei stark unterbrochenen Schnitten oder niedrigen Schnittgeschwindigkeiten, wo Bruchfestigkeit gefragt ist. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080412 TH10 Wendeplatten - Tungaloy
Take advantage of precise chip control, low cutting forces and ISO compatibility for reliable turning performance; order the insert directly via Metav Werkzeuge or consult the technical advisers if further specification is required. WNMG 080412 TH10 trigon turning insert by Tungaloy — uncoated carbide, double‑sided chipbreaker WNMG 080412 TH10 is a trigon‑shaped, ISO‑standard turning insert designed for external and internal turning in a wide range of non‑ferrous applications and general turning tasks ISO‑standard trigon insert Uncoated carbide grade TH10 1.2 mm corner radius for robust edges Double‑sided chipbreaker for extended indexing Precise machining with a universal uncoated grade The insert is produced in carbide and graded TH10 to provide a sharp, universal cutting edge that lowers cutting forces and produces clean surface finishes on non‑ferrous materials. The uncoated nature of the grade reduces built‑up edge tendency in softer alloys and helps maintain a predictable edge geometry during interrupted cuts. This results in consistent component quality and reduces the need for excessive finishing operations, improving overall machining efficiency. Geometry geared to stable turning and repeatable setup With a trigon form and an included angle of 80°, the geometry favours accessibility in confined work and versatile engagement angles for common turning tasks. The 1.2 mm corner radius supports a balance between edge strength and surface finish, while the 4.76 mm thickness contributes to stable seating in the toolholder. The cylindrical centre hole and the double‑sided chipbreaker enable two indexing positions, increasing tool life per insert and lowering tooling cost per part. Compatibility and system considerations for fleet standardisation The insert conforms to ISO specifications, so holder compatibility depends on matching the insert form, clearance geometry, tolerance class, fixing method, size and thickness. When standardising tooling, pairing this insert with a suitable external holder or boring bar and the correct clamp set simplifies logistics and reduces setup variability. The modular system approach enables straightforward replacement of inserts without redesigning the holder setup, supporting a reliable production flow. Application guidance and process benefits Designed primarily for turning, the insert suits both external and internal operations where low cutting forces and clean chip formation are priorities. The TH10 grade promotes stable chip control in many non‑ferrous materials and mixed batches, limiting machine downtime for chip management. For customers seeking to optimise cycle times while maintaining surface integrity, the combination of carbide substrate and tailored chipbreaker geometry provides a cost‑effective compromise between productivity and finish quality. Contact Metav Werkzeuge for an application‑specific recommendation based on the Tungaloy TH10 grade or to request matching holder and clamping options — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Manufacturer article number: 6809755 SKU: 6809755-Tungaloy Manufacturer SKU: TUN6809755 Label: WNMG080412 TH10 ISO designation: WNMG080412 Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Plate size: 08 Special features Material: carbide Grade: TH10 (uncoated) Chipbreaker: double‑sided Plate form: trigon Centre hole: cylindrical hole Typical use: external and internal turning System: ISO turning insert, compatible with matching holders and clamp sets FAQ What materials is this insert best suited for? The WNMG 080412 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated TH10 grade supports low cutting forces and clean surface finishes. How does the double‑sided chipbreaker affect tooling costs? A double‑sided chipbreaker provides two usable cutting edges per index, extending the service life of each insert and reducing tooling cost per component when used with the correct holder and clamp set. Which dimensions are critical when selecting a compatible holder? Holder selection should match the insert form, clearance geometry, tolerance class, fixing method, plate size and thickness; the 4.76 mm thickness and trigon form are particularly important for correct seating. Can the insert be used for interrupted cuts or harder alloys? The robust 1.2 mm corner radius and carbide substrate give reasonable resistance to interruption, but the uncoated TH10 grade is primarily intended for non‑ferrous and general turning; for higher hardness materials a dedicated coated grade may be preferable. Where is the original product manufactured and how is it identified? The insert is a genuine Tungaloy product identified by manufacturer article number 6809755 and manufacturer SKU TUN6809755, supplied as a new original item by the manufacturer Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant PVD-coated carbide, a sharp cutting edge and robust clamping geometry to ensure stable, repeatable turning operations; order the insert through Metav Werkzeuge or consult our specialists for compatibility and selection advice. WNMG 080416 AH120 — ISO turning insert, PVD-coated carbide, 1.6 mm radius (Tungaloy) The WNMG 080416 AH120 is an ISO-standard turning insert for external and internal turning applications, designed for process-stable machining where a sharp cutting edge and resistance to wear and chipping are required PVD-coated carbide for long tool life Sharp cutting edge for process stability Trigon form with 80° lead geometry 1.6 mm corner radius for robust cutting High-performance abrasion resistance for stable series production The PVD-coated carbide grade AH120 provides a balance of abrasion resistance and edge toughness, making it suitable where both a sharp cutting edge and reliable tool life are demanded. As an ISO turning insert in the WNMG family, the component combines a thin 4.76 mm plate thickness with a hardened cutting edge treatment to reduce flank wear. This results in consistent dimensional control and reduced frequency of insert changes, supporting uninterrupted production cycles and a measurable reduction in tool-change downtime. Engineered geometry to maintain cutting consistency and chip control The trigon-shaped plate with an 80° lead geometry and TM chipbreaker is optimised for reliable chip formation in typical external and internal turning tasks. The 0° clearance angle and cylindrical locating hole ensure repeatable seating in compatible holders, while the 1.6 mm corner radius offers a compromise between strength at the edge and the capacity to handle moderate depths of cut. These design elements contribute directly to predictable cutting forces and improved surface finish when the grade and chipbreaker are matched to the workpiece and setup rigidity. System compatibility and selection guidance for correct tool assembly Compatibility with the toolholder depends on the insert’s form, clearance angle, tolerance class, fastening style, size and thickness. The ISO designation and the cylindrical hole make the insert suitable for most standard WNMG holders, provided the holder matches the 08-size and the plate thickness of 4.76 mm. Choosing the correct TM chipbreaker and the AH120 grade in the context of the material, machining type and machine stability helps to avoid premature edge chipping and achieves reproducible results across batches. Practical machining recommendations to increase process security For best results, pair the insert with a correctly rated cutter body, appropriate shim or clamp set and the specified screw for secure fixation. The insert’s wear behaviour under cutting conditions benefits from coolant strategies that support chip evacuation and temperature control; when higher cutting speeds or interrupted cuts are required, check holder rigidity and machining parameters before increasing feed or depth. The PVD-coated surface reduces built-up edge risk and contributes to consistent surface quality when the combination of grade and chipbreaker is aligned with the application. For application-specific advice or to procure original Tungaloy WNMG 080416 AH120 inserts, contact Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt assistance and supply. Technical data Article number: 6843521 Manufacturer SKU: TUN6843521 Internal SKU: 6843521-Tungaloy Model series: ISO turning inserts Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Lead/geometry angle: 80° Clearance angle: 0° Size designation: 08 Special features ISO designation: WNMG080416-TM Grade/coating: AH120, PVD-coated cemented carbide Chipbreaker: TM Plate form: trigon Hole: with cylindrical hole Typical application: external and internal turning FAQ Is the WNMG 080416 AH120 compatible with standard WNMG holders? Compatibility is determined by holder form, clearance angle, tolerance class, fastening, size and thickness; the WNMG 080416 AH120 fits standard holders designed for 08-size WNMG inserts with a 4.76 mm plate thickness. Which machining tasks suit this insert best? The AH120 grade with TM chipbreaker is intended for general turning tasks requiring a sharp cutting edge and process stability, including both external and internal turning operations. How does the PVD coating on AH120 influence performance? The PVD coating improves wear resistance and reduces adhesion on the cutting edge, extending tool life and helping to maintain surface finish consistency under normal cutting conditions. What should be considered when clamping this insert? Use the correct clamp, underlay and screw specified for WNMG inserts; the cylindrical locating hole and standard fastening ensure reliable seating when the corresponding holder geometry and tolerance class are observed. Can the insert handle interrupted cuts or heavy feeds? The 1.6 mm corner radius and the AH120 grade offer increased edge strength for moderate interrupted cuts or higher feeds, but machine and holder rigidity should be verified to maintain process security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH120 Wendeplatten - Tungaloy
WNMG 080416 AH120 Wendeplatte für Drehen (ISO-Drehwendeschneidplatten) – Tungaloy Die WNMG080416-TH AH120 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen mit PVD-beschichtetem Hartmetall und hohem Fokus auf Prozesssicherheit. PVD-beschichtetes Hartmetall für lange Standzeit Hohe Schneidkantenstabilität durch scharfe Schneidkante Trigonform für stabile Auflage und Steifigkeit Mit zylindrischem Loch für einfache Befestigung Geeignet für universelle Drehanwendungen Robustheit durch Material und Beschichtung Die Wendeschneidplatte kombiniert Hartmetall mit einer PVD-Beschichtung, wodurch die Schneidkante verschleißarm bleibt und die Standzeit steigt. Durch die hochwertige Beschichtung wird vorzeitiger Verschleiß reduziert, was die Stillstandszeiten in der Fertigung senkt und die Wirtschaftlichkeit verbessert. Die Sorte AH120 bietet dabei ein ausgewogenes Verhältnis aus Zähigkeit und Verschleißfestigkeit, ideal wenn scharfe Schneidkanten und Prozessstabilität gefordert sind. Präzision und Einsatzgebiet Für Außen- und Innendrehen konzipiert, ermöglicht die Platte reproduzierbare Schnittbilder und konstante Oberflächengüten. Die Trigonform sorgt für eine stabile Auflage am Halter, wodurch Vibrationen und Ausschläge minimiert werden. Diese Eigenschaften machen die Platte besonders geeignet für Serienfertigung und anspruchsvolle Einzelteile, bei denen gleichbleibende Maßhaltigkeit und Oberflächenqualität entscheidend sind. Kompatibilität und Systemintegration Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die WNMG-Bauform und das zylindrische Loch erleichtern die Montage an gängigen Außenhaltern oder Bohrstangen. Der Systemaufbau umfasst die ISO-Drehplatte, einen passenden Außenhalter, Unterlage/Klemmsatz und Ersatzschrauben; so lässt sich die Platte schnell in vorhandene Werkzeugsysteme integrieren. Effizienzvorteil im Fertigungsprozess Durch stabile Spanbildung und optimierte Spanformer reduziert die Platte Nacharbeit und Werkzeugwechsel. Der scharfe Eckenradius von 1,6 mm und der nominelle Freiwinkel von 0° unterstützen präzise Zerspanung bei moderaten bis hohen Schnittwerten. Resultat ist eine gesteigerte Produktivität bei gleichzeitiger Reduktion der Betriebskosten pro bearbeitetem Bauteil. Zielgruppe und Anwendungsempfehlung Entwickelt für mechanische Fertigungsbetriebe, Werkzeugmacher und Serienfertiger, die Wert auf Prozesssicherheit und Reproduzierbarkeit legen. Die Wendeplatte eignet sich für Anwender, die eine vielseitige Platte für verschiedene Werkstoffe und unterschiedliche Bearbeitungsarten suchen; dabei empfiehlt sich die Abstimmung von Spanbrecher und Sorte auf Werkstoff und Bearbeitungsstabilität. Für prozesssichere Drehbearbeitung empfiehlt sich die AH120-Sorte von Tungaloy; technische Beratung und Bestellabwicklung über Metav Werkzeuge unter info@metav-werkzeuge.com oder Tel. +49 2822 7131930 Technische Daten Artikelnummer: 6793715 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-TH AH120 Hersteller Artikelnummer: 6793715 SKU: 6793715-Tungaloy Daten Radius: 1,6 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Eckenradius: 1,6 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: AH120 Schneidstofftyp: PVD-beschichtetes Hartmetall (PVD = physikalische Gasphasenabscheidung) Spanbrecher: TH Plattenform: Trigon Loch: mit Loch (zylindrisches Loch) Einsatz: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Wie lautet die vollständige Bezeichnung der Platte und wer ist der Hersteller? Die Platte trägt die Bezeichnung WNMG080416-TH AH120 und wird von Tungaloy geliefert. In der Produktkennung ist die Form WNMG sowie die Sorte AH120 enthalten. Für welche Bearbeitungsaufgaben eignet sich die WNMG080416-TH AH120 besonders? Die WNMG080416-TH AH120 eignet sich vor allem für Außen- und Innendrehen in Serien- und Einzelfertigung, wenn Prozesssicherheit und standfeste Schneidkanten gefordert sind. Welche Vorteile bietet die PVD-Beschichtung bei dieser Wendeschneidplatte? Die PVD-Beschichtung der AH120-Sorte erhöht die Verschleißfestigkeit und trägt zu längeren Standzeiten bei, wodurch Werkzeugwechsel und Stillstandszeiten reduziert werden. Wie beeinflusst die Trigonform die Zerspanung? Die Trigonform sorgt für eine größere Auflagefläche am Halter, erhöht die Stabilität und reduziert Schwingungen, was zu besseren Oberflächenqualitäten führt. Welche Rolle spielt der Spanbrecher TH bei der Anwendung? Der Spanbrecher TH ist auf kontrollierte Spanbildung ausgelegt; er unterstützt saubere Spanabfuhr und minimiert Bruch oder Verwicklungen bei unterschiedlichsten Werkstoffen. Ist die Platte direkt kompatibel mit Standard-Außenhaltern? Die Platte ist ISO-genormt; die Kompatibilität zu Haltern hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Übliche ISO-Außenhalter unterstützen die WNMG-Bauform. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080416 AH6225 Wendeplatten - Tungaloy
WNMG 080416 AH6225 Drehwendeschneidplatte für Drehen von Tungaloy Die WNMG080416-ZM AH6225 ist eine ISO-genormte Wendeschneidplatte für universelles Drehen, entwickelt für mittlere Bearbeitungen an rostfreiem Stahl WNMG080416-ZM AH6225 von Tungaloy PVD-beschichtetes Hartmetall für rostfreie Stähle Trigonform mit 0° Freiwinkel und zylindrischem Loch Eckenradius 1,6 mm für stabile Schneidkante ISO-genormt kompatibel mit gängigen Außenhaltern Produktivität durch stabile Schneidkante Die Wendeschneidplatte überzeugt durch die Kombination aus PVD-Beschichtung und qualitativem Hartmetall, was zu verbesserter Standzeit und konstanter Spanbildung führt. Die Sorte AH6225 ist speziell für rostfreie Stähle optimiert und bietet eine scharfe zugleich stabile Schneidkante, die Prozesszeiten reduziert und Nacharbeit minimiert. Für Fertigungsbetriebe bedeutet das höhere Wirtschaftlichkeit und planbare Werkzeugzyklen ohne unnötige Stillstandzeiten. Einsatzszenarien und Materialabdeckung Für Außen- und Innendrehen ist die Platte vielseitig einsetzbar; die Sorte AH6225 passt besonders bei wechselnden Schnittbedingungen und mittleren Schnitttiefen. Der Spanbrecher ZM sorgt für kontrollierten Spanbruch und erleichtert die Spanabfuhr bei längeren Drehungen. Erklärung: Ein Spanbrecher formt die Späne so, dass sie kurz und kontrollierbar bleiben, was die Prozesssicherheit erhöht und die Maschinenverfügbarkeit verbessert. Kompatibilität und Einbaueigenschaften Die ISO-Genormung garantiert die Austauschbarkeit mit standardisierten Außenhaltern; entscheidend sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Plattendicke 4,76 mm. Die trigonale Plattenform mit zylindrischem Loch und 0° Freiwinkel erlaubt sichere Spannungen in herkömmlichen Klemmsystemen. Prüftipp: Vor dem Einbau die Schraube und Unterlage auf passende Maße abstimmen, um Sitz und Wiederholgenauigkeit zu gewährleisten. Zielgruppe und Anwendungsempfehlung Speziell geeignet für Lohnfertiger, Serienbetriebe und Werkzeughersteller, die rostfreie Stähle bearbeiten und stabile reproduzierbare Ergebnisse benötigen. Die Platte empfiehlt sich dort, wo mittlere Schnitttiefen und wechselnde Bedingungen vorkommen. Für optimale Ergebnisse Spanbrecher und Schnittdaten an Werkstückgeometrie und Maschinensteifigkeit anpassen; bei Bedarf unterstützt der Technische Support mit Vorschlägen zur Schnittdatenoptimierung. Empfehlung: Bestellung der WNMG080416-ZM AH6225 direkt über Metav Werkzeuge; technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 6947591 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080416-ZM AH6225 Hersteller SKU: TUN6947591 Fakten Eckenradius: 1,6 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH6225 — universelle Sorte für rostfreie Stähle Spanbrecher: ZM — universeller Spanbrecher für stabile Spanform Plattenform: Trigon Loch: zylindrisches Loch Anwendung: Drehen ISO-Bezeichnung: WNMG080416-ZM Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. FAQ Welche Werkstoffe sind für die WNMG080416-ZM AH6225 am besten geeignet? Die Platte WNMG080416-ZM AH6225 von Tungaloy ist speziell für rostfreie Stähle ausgelegt; durch die PVD-beschichtung und die Sorte AH6225 ergibt sich eine breite Werkstoffabdeckung bei mittleren Bearbeitungen. Wie beeinflusst der Spanbrecher ZM die Bearbeitung? Der Spanbrecher ZM formt kurze kontrollierte Späne und verbessert die Spanabfuhr; bei der WNMG080416-ZM AH6225 von Tungaloy führt das zu stabiler Prozessführung und weniger Störungen während des Drehen. Welche Halter sind mit dieser Wendeschneidplatte kompatibel? ISO-genormte Außenhalter mit Trigonaufnahme und passender Befestigung sind kompatibel; die Plattendicke 4,76 mm und das zylindrische Loch erfordern entsprechende Schraube und Unterlage, wie bei der WNMG080416-ZM AH6225 (TUN6947591) zu prüfen. Welche Vorteile bringt die PVD-Beschichtung bei dieser Platte? Die PVD-Beschichtung erhöht die Oberflächenhärte und Wärmebeständigkeit der Schneidkante, was die Standzeit und Oberflächengüte beim Drehen von rostfreiem Stahl mit der WNMG080416-ZM AH6225 verbessert. Für welche Bearbeitungsbedingungen ist die Sorte AH6225 ausgelegt? Die Sorte AH6225 ist für wechselnde Schnittbedingungen und mittlere Bearbeitungen konzipiert; sie bietet eine scharfe zugleich stabile Schneidkante und damit konstante Leistung in Serien- und Einzelteilfertigung.
WNMG 080416 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of sharp, stable cutting edges and ISO compatibility to keep turning processes consistent and productive; the PVD-coated AH6225 grade delivers reliable performance on rostfreier Stahl under medium machining conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. WNMG 080416 AH6225 — Indexable turning insert, PVD-coated carbide, Tungaloy The WNMG080416-DM AH6225 is an ISO-indexable trigon insert designed for external and internal turning, offering a balance of a sharp yet stable cutting edge for variable machining conditions. ISO-indexable trigon insert, 80° geometry PVD-coated carbide AH6225 for rostfreier Stahl 1.6 mm corner radius for robust cutting Central hole with cylindrical fit for secure clamping Geometry engineered for steady metal removal and surface quality The trigon 80° geometry paired with a 1.6 mm corner radius gives a dependable compromise between edge strength and cutting accuracy. The PVD-coated carbide AH6225 grade provides a sharp cutting line while maintaining wear resistance in intermittent or variable cutting conditions; this results in consistent metal removal rates and improved surface finish on components. For medium-depth cuts, the geometry minimises vibration and supports dimensional stability, which reduces rework and supports predictable cycle times. ISO compatibility and clamping that simplifies integration This insert is part of a standard ISO series where compatibility is determined by shape, clearance angle, tolerance class, clamping method, size and thickness. The plate is supplied with a cylindrical hole for secure, repeatable clamping in suitable holders and boring bars. The DM chipbreaker is matched to the grade and application to promote controlled chip formation, which eases chip evacuation during both external and internal turning. Using an ISO-indexable component reduces setup complexity and makes it straightforward to replace worn inserts without altering the toolholder. Productivity advantages and application-oriented support Designed as a universal grade for rostfreier Stahl, the insert balances a sharp edge with stability, making it suitable for medium finishing and semi-finishing passes. The combination of PVD coating and a robust substrate extends tool life under changing cutting conditions and helps maintain a consistent surface quality across batches. For further technical data or to verify suitability for a specific machining task, Metav Werkzeuge offers detailed support; technical specifications and application recommendations can be requested by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 For secure, medium-duty turning with the AH6225 grade and ISO compatibility, contact Metav Werkzeuge for ordering and holder recommendations — Metav Werkzeuge’s specialists will advise on the correct clamping and chipbreaker choice Technical data Article number: 6947617 Manufacturer SKU: TUN6947617 Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Facts Geometry angle: 80° Corner radius: 1.6 mm Clearance angle: 0° Thickness: 4.76 mm Size code: 08 Special features Grade/coating: AH6225, PVD-coated carbide Plate form: trigon Chipbreaker: DM Hole: with cylindrical hole Application: turning (external and internal) Typical use: medium machining on rostfreier Stahl FAQ What materials is this insert best suited for? The WNMG080416-DM AH6225 is formulated primarily for rostfreier Stahl; the AH6225 grade offers a balance of sharpness and edge stability for medium machining on stainless steels. How does the DM chipbreaker influence machining? The DM chipbreaker on this indexable insert promotes controlled chip formation suited to turning operations, which helps with chip evacuation and stable cutting when machining rostfreier Stahl. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, clamping style, size and thickness; the insert’s cylindrical central hole allows secure mounting in holders designed for trigon ISO plates. Can this insert be used for both external and internal turning? Yes, the insert is intended for both external and internal turning applications; selection of the appropriate holder and cutting parameters is recommended for best results. Is the PVD coating suitable for interrupted cuts? The PVD-coated AH6225 grade provides a wear-resistant coating with a substrate designed for stability, making it suitable for varying conditions, including occasional interrupted cutting in medium-duty turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade engineered for stainless steels and a 1.6 mm corner radius to secure a sharp yet stable cutting edge for medium turning operations; order the inserts through Metav Werkzeuge or request process advice from our specialists. WNMG 080416 AH6225 ISO trigon turning insert by Tungaloy — PVD‑coated carbide, chipbreaker TM, for turning WNMG080416-TM AH6225 is an ISO‑standard trigon indexable insert designed for outside and inside turning; compatible with ISO holders that match form, relief, tolerance, fastening, size and thickness ISO trigon insert size 08 PVD‑coated carbide grade AH6225 1.6 mm corner radius for robust edges Cylindrical hole for secure clamping Consistent edge stability for stainless steel turning The PVD‑coated carbide grade AH6225 delivers a balance between a sharp cutting edge and wear resistance, specifically optimised for stainless steels under medium cutting conditions. This composition supports repeatable surface quality and predictable tool life in variable production environments. Selecting this grade together with the TM chipbreaker reduces built‑up edge and helps maintain dimensional accuracy, which in turn lowers scrap rates and contributes to more consistent cycle times on turning centres. Precise geometry that eases setup and repeatability The trigon insert in size 08 features an 80° geometry and a 1.6 mm corner radius, combined with a 4.76 mm thickness and a cylindrical hole for secure fastening. These specifications provide stable seating in compatible ISO toolholders and permit fast indexing when edge refresh is needed. The insert’s geometry supports a predictable cutting behaviour, simplifying process parameter selection and reducing trial‑and‑error during set‑up. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so matching the holder ensures optimal clamping and torque distribution. Process efficiency and guidance for typical applications Designed for general turning, including both external and internal operations, the insert’s combination of grade and TM chipbreaker offers robust performance across common stainless steel alloys. For medium feeds and depths of cut, the grade sustains a sharp edge while resisting flank wear; this supports longer intervals between indexings and fewer tool changes. Where intermittent cutting or variable conditions occur, the insert promotes process security and helps maintain a consistent surface finish. For specific application parameters or material variants, technical consultation can guide the choice of feed, speed and coolant strategy to maximise productivity. Contact Metav Werkzeuge for tailored advice or to request Tungaloy WNMG080416‑TM AH6225 inserts; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Manufacturer article number: 6903252 SKU (manufacturer): TUN6903252 SKU: 6903252-Tungaloy Label: WNMG080416-TM AH6225 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Geometry/angle: 80° Relief angle: 0° Size: 08 Special features Grade/sort: AH6225 Coating: PVD Material: carbide Plate shape: trigon Hole: with cylindrical hole Chipbreaker: TM Application: Turning ISO designation: WNMG080416-TM FAQ What materials is this insert suitable for? The AH6225 grade is developed as a universal grade for stainless steels; the insert is recommended primarily for machining stainless steel variants under medium cutting conditions. Which operations are typical for this insert? The insert is intended for outside and inside turning; the geometry and chipbreaker suit a range of medium turning tasks where a balance of edge sharpness and stability is required. What are the key geometric features to note? The insert has an 80° geometry, a 1.6 mm corner radius and a 4.76 mm plate thickness, plus a cylindrical hole for secure clamping in suitable ISO holders. How does the chipbreaker TM affect machining? The TM chipbreaker is matched to the grade to provide reliable chip control and reduce built‑up edge during stainless steel turning, supporting consistent surface finish and stable cutting forces. How to ensure compatibility with a toolholder? Compatibility is defined by the insert form, relief/freiwinkel, tolerance class, fastening method, size and thickness; ensure the holder matches these parameters for correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080416 AH6225 Wendeplatten - Tungaloy
WNMG 080416 AH6225 – ISO-Drehwendeschneidplatte zum Drehen | Tungaloy WNMG 080416 AH6225 bietet gezielte Performance für Außen- und Innendrehen an rostfreien Stählen und ist für den Einsatz in standardisierten ISO-Haltern ausgelegt Trigonale Platte für stabile Auflage Radius 1,6 mm für vielseitige Konturen PVD-Beschichtung AH6225 für rostfreie Stähle 0° Freiwinkel zur universellen Anwendung Mit zylindrischem Loch für sichere Befestigung Hohe Standzeit durch PVD-Beschichtung und Hartmetallqualität Die PVD-Beschichtung kombiniert mit hochwertigem Hartmetall sorgt für eine erhöhte Verschleißfestigkeit und konstante Schneidleistung bei mittleren Schnittbedingungen. Die AH6225-Sorte ist gezielt für rostfreie Stähle formuliert und bietet eine stabile Schneidkante, die weniger Nachschärfungen erfordert. Vorteil für die Produktion: Weniger Stillstandzeiten und planbare Werkzeugkosten. ISO-Kompatibilität und sichere Spannbarkeit für wiederholgenaue Prozesse Die Platte ist nach ISO-Norm gefertigt; Form, Freiwinkel, Toleranzklasse, Befestigungsloch und Dickenmaß sind entscheidend für die Passung im Halter. Die trigonale Form mit zylindrischem Loch gewährleistet zuverlässige Lage im Aufnahmesitz und wiederholgenaue Positionierung. Daraus resultiert ein einfacher Wechselprozess und reproduzierbare Schnittbedingungen in Serienläufen. Einsatzempfehlung und Erklärung des Spanbrechers PM Für Außen- und Innendrehen empfiehlt sich die Auswahl des Spanbrechers entsprechend Werkstoff, Zustellung und Stabilität der Maschine. Der PM-Spanbrecher steht für eine universelle Spanform, geeignet für wechselnde Schnittbedingungen. Spanbrecher sind Einsätze am Schneidkantenrand, die den Span in definierte Bruchstücke führen und so die Spanabfuhr verbessern. Wirtschaftlichkeit für Werkstatt und Lohnfertigung Die Kombination aus PVD-Beschichtung, robustem Grundsubstrat und dem Radius 1,6 mm erlaubt eine breite Werkstoffabdeckung bei moderatem Wechselaufwand. Anwender aus Werkstatt und Serienfertigung profitieren von verringerten Werkzeugwechselintervallen und stabiler Teilequalität. Hinweis: Für optimale Standzeiten Kühlung, Halterzustand und Schnittdaten auf Werkstück und Maschine abstimmen. Für produktive Zerspanung mit der AH6225-Sorte empfehlen wir die Belieferung über Metav Werkzeuge; bei technischen Fragen erreichen Sie den Vertrieb per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Bezeichnung: WNMG080416-PM Artikelnummer: 6947625 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Fakten Radius: 1,6 mm Plattendicke: 4,76 mm Winkel: 80° Freiwinkel: 0° Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: AH6225 (PVD-Schneidstoffsorte für rostfreie Stähle) Spanbrecher: PM – universelle Spanform, für mittlere Zustellungen Plattenform: trigonale Form Loch: mit Loch, zylindrisches Loch Einsatzgebiet: Drehen, Außen- und Innendrehen FAQ Was macht die Sorte AH6225 besonders geeignet für rostfreie Stähle? Die AH6225-Sorte ist eine PVD-beschichtete Schneidstoffausführung, die Hitzebeständigkeit und Kantenstabilität kombiniert; bei WNMG 080416 AH6225 reduziert das die Aufbaubildung an der Schneide und verlängert die Standzeit beim Drehen von rostfreien Stählen. Welche Vorteile bietet die trigonale Form für die Prozesssicherheit? Die trigonale Form sorgt für mehrere Schneidkanten pro Platte und eine stabile Auflage im Halter; bei der WNMG080416-PM bedeutet das schnellere Wechselzyklen und reproduzierbare Schneidbedingungen für Serienprozesse. Wie beeinflusst der Radius 1,6 mm die Bauteilqualität? Ein Radius von 1,6 mm bietet eine gute Balance zwischen Kantenschonung und Formtreue; bei Konturen mit mittleren Radien verbessert sich die Oberflächengüte, ohne die Schneidkante übermäßig zu belasten. Ist die Platte für Innen- und Außenbearbeitung gleichermaßen geeignet? Ja, die WNMG 080416 AH6225 ist für Außen- und Innendrehen ausgelegt; die Wahl des passenden Halters und die Anpassung der Schnittwerte sind jedoch entscheidend für optimale Ergebnisse. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com