CCMT 09T308 NS9530 Wendeplatten - Tungaloy
Combining low cutting forces and a fine surface finish, the CCMT09T308 NS9530 cermet insert delivers economical finishing in continuous turning; order directly via Metav Werkzeuge or consult our application advisors for process optimisation. CCMT09T308 NS9530 CCMT ISO Turning Insert for Finishing by Tungaloy The CCMT09T308 NS9530 is an ISO rhombic turning insert designed for precision finishing of steel in continuous-turning operations, providing a sharp cutting edge and stable chip control. Finishing-grade uncoated cermet NS9530 Sharp cutting edge for low cutting forces 0.8 mm nose radius for high surface finish ISO CCMT rhombic insert with 7° clearance Consistent finishing performance for steel components The uncoated cermet NS9530 grade is developed for finishing applications on steel, offering a notably sharp cutting edge and reduced cutting forces that translate into a better surface quality and lower power draw. Cermet combines ceramic hardness with metallic toughness; this means the cutting edge resists wear while delivering a fine surface without the need for aggressive feeds. For continuous cuts and small depths of cut the geometry supports stable engagement, reducing vibration and repeatable part-to-part results. The result is improved process stability and fewer rework cycles. ISO compatibility and mounting considerations for reliable set-up Being an ISO-designated CCMT rhombic insert, compatibility with the toolholder is governed by form, relief angle, tolerance class, fastening, size and thickness. The insert features a 0.8 mm nose radius and a 7° relief angle; matching these values with the holder and correct clamping components ensures correct seat and repeatable positioning. The plate thickness of 3.97 mm and the cylindrical hole with one-sided countersink (40°–60°) are intended for standard ISO clamping systems. Selecting the correct top clamp or screw set and verifying the holder’s tolerance will preserve insert life and prevent movement under load. Process reliability and practical recommendations for greater productivity For high-quality finishes and consistent chip control, pair the insert’s single-sided chipbreaker and NS9530 grade with modest feed rates and continuous cutting conditions. The rhombic CCMT geometry supports both external and internal turning when combined with the appropriate holder or boring bar, and the smooth edge of the cermet grade reduces built-up edge tendencies on steel. These characteristics favour long service intervals in finishing operations and contribute to predictable tool-life. For best results, adapt cutting parameters to machine rigidity and part clamping, and choose a chipbreaker suited to the workpiece and depth of cut. For reliable finishing performance backed by Tungaloy expertise, contact Metav Werkzeuge for application advice and stock availability — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998437 Manufacturer SKU: TUN6998437 Label: CCMT09T308 NS9530 Tungaloy-Wendeplatte Series: ISO-Drehwendeschneidplatten Facts Nose radius: 0.8 mm Relief angle: 7° Included angle: 80° Thickness: 3.97 mm Size: 09 Materials & features Uncoated cermet grade NS9530 Rhombic CCMT insert form With hole: cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker For turning (external and internal) Compatibility determined by form, relief, tolerance, fastening, size, thickness FAQ What steels is this grade intended for? The CCMT09T308 NS9530 Tungaloy turning insert is a finishing-grade, uncoated cermet developed for steels and provides a sharp edge for low cutting forces and excellent surface finish. Can this insert be used for both external and internal turning? Yes, the rhombic CCMT geometry and the specified dimensions allow use in both external and internal turning when mounted in a compatible holder or boring bar. How does the 0.8 mm nose radius affect surface quality? A 0.8 mm nose radius on the insert supports improved surface finish while maintaining acceptable edge strength for finishing feeds and shallow depths of cut. What clamping features are required for correct installation? The insert has a cylindrical hole with a one-sided countersink (40°–60°) and a 3.97 mm thickness; a matching ISO CCMT clamp and appropriate screws or underlay are required for secure seating. Is this insert suitable for interrupted cuts? This grade is optimised for continuous cutting and small depths of cut; interrupted machining may reduce edge life and should be evaluated against specific application conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the uncoated NS9530 cermet for outstanding surface quality, a 0.8 mm nose radius for precise finishing, and ISO compatibility for reliable tool replacement; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. CCMT 09T308 NS9530 turning insert by Tungaloy — uncoated cermet, 0.8 mm radius The CCMT09T308 NS9530 is an ISO rhombic turning insert designed for fine finishing in turning operations, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. Rhombic ISO insert CCMT 09T308 Uncoated cermet grade NS9530 Sharp edge for fine finishing 0.8 mm nose radius, 7° clearance Consistent fine finishes and lower cutting forces for steel components The uncoated cermet grade NS9530 is optimised for finishing steel: its fine-grained composition and sharp geometry reduce cutting forces and promote a superior surface finish. In practice, this means fewer passes to reach the required tolerance and less need for secondary finishing, which improves throughput and reduces rework. For non-specialists, cermet denotes a ceramic–metal composite that combines hardness and heat resistance with enough toughness for steady cutting; the result is a cutting edge that maintains sharpness during continuous operations and small depths of cut. Predictable fit and quick replacement with ISO conformity Designed to the ISO designation CCMT09T308, the insert ensures predictable compatibility with standard holders when form, clearance and tolerance class are matched. Key dimensions such as 3.97 mm thickness, 80° included angle, 7° clearance and a 0.8 mm nose radius determine the mechanical fit and cutting geometry. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for positive clamping. These measurable parameters simplify integration into existing tool systems and reduce setup time on the shop floor. Practical application guidance and workshop benefits This turning grade is intended primarily for external and internal turning where a high-quality finish is the priority. The single-sided chipbreaker aids controlled chip formation in continuous cuts; selecting the matching chipbreaker and grade according to workpiece material and machine stability results in optimal performance. For workshops, the principal advantages are repeatable surface quality, reduced machining cycles on fine-turning tasks and stable edge behaviour that extends effective tool life. Technical compatibility checks should focus on holder form and clamping geometry to ensure the expected process reliability. For precise finishing tasks choose the Tungaloy NS9530 CCMT 09T308 insert and contact Metav Werkzeuge for targeted product selection and implementation advice Technical data Article number: 6997714 Manufacturer SKU: TUN6997714 SKU: 6997714-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Data ISO designation: CCMT09T308 Included angle: 80° Clearance (facing angle): 7° Thickness: 3.97 mm Nose radius: 0.8 mm Size: 09 Special features Uncoated cermet grade NS9530 Material: cemented carbide (Hartmetall) Single-sided chipbreaker Countersunk cylindrical hole (40°–60°) Rhombic plate form Suitable for turning (external and internal) Optimised for continuous cut and small depths of cut Compatibility depends on form, clearance, tolerance class, attachment, size and thickness FAQ Which materials is this insert designed for? The CCMT09T308 NS9530 is a finishing grade optimised for steel, delivering high surface quality in continuous turning operations. What dimensions should be checked for holder compatibility? Check the ISO designation CCMT09T308, thickness 3.97 mm, nose radius 0.8 mm, included angle 80° and the cylindrical hole with one-sided countersink (40°–60°) to ensure correct holder fit. Is the NS9530 grade coated? No, the NS9530 is an uncoated cermet grade, chosen for its sharp edge and surface finish capability. Which turning operations suit this insert best? The insert is best for fine finishing in external and internal turning where small depths of cut and continuous feed produce the required surface quality. Is this insert suitable for interrupted or heavy roughing cuts? The CCMT09T308 NS9530 is a finishing sort intended for continuous cuts and small depths; for interrupted cuts or heavy roughing a tougher, wear-resistant grade is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cutting edge, uncoated cermet NS9530 and ISO compatibility for consistent finishing results and low cutting forces. Order the insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. CCMT09T308 NS9530 — ISO turning insert for finishing (Tungaloy) The CCMT09T308 NS9530 is an ISO-standard turning insert designed for finishing operations on steel, offering a sharp cutting edge and a low cutting-force cermet grade ideal for continuous cuts and small depths of cut. Sharp cutting edge for fine finishes Uncoated cermet grade NS9530 Compatible with ISO tooling systems 0.8 mm corner radius for small depths Greater finishing performance with lower cutting forces The uncoated cermet grade NS9530 delivers a distinctly sharp cutting edge that reduces cutting forces and improves surface quality during finishing operations. Cermet combines ceramic hardness with metallic toughness, so the insert sustains a clean edge during continuous cuts and small feed depths; this results in a superior surface finish and extended interval between dressing or regrinding. For machining steel where low cutting forces and minimal burr formation matter, this grade is engineered to deliver reproducible, high-quality results. Secure ISO compatibility and precise seating for stable cuts Compatibility with ISO holders is determined by the insert’s form, relief angle 7°, tolerance class, fastening method, size and thickness. The rhombic geometry and the cylindrical hole with a one‑sided countersink (40°–60°) ensure positive location and secure clamping, which reduces vibration and improves tool life. The corner radius 0.8 mm and plate thickness 3.97 mm provide mechanical stability for small-step finishing cuts while maintaining repeatable positioning in standard ISO turning systems. Practical application advice and process optimisation This insert is a finishing grade intended primarily for steel turning; select the one‑sided chipbreaker to match continuous cutting conditions and small depths of cut. The one-sided chipbreaker supports consistent chip control in stable set-ups and helps avoid built-up edge. When integrating the insert into a tool system, ensure holder compatibility by checking form and size; adjust feeds rather than depth for optimal finish. For process optimisation, our consultants can advise on combining the insert with suitable insert holders and cutting parameters to balance productivity and surface quality. For precision finishing with Tungaloy's NS9530 grade, contact Metav Werkzeuge for application support and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6789561 Manufacturer SKU: TUN6789561 Our SKU: 6789561-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Size: 09 Plate thickness: 3.97 mm Relief angle: 7° Corner radius: 0.8 mm Included angle: 80° Special features ISO designation: CCMT09T308 Grade: NS9530 (uncoated cermet) Chipbreaker: one-sided Plate shape: rhombic Hole: cylindrical with one-sided countersink (40°–60°) Compatible with ISO turning holders FAQ What is the primary application for this insert? The CCMT09T308 NS9530 Tungaloy insert is designed for finishing in turning operations on steel, optimised for continuous cuts and small depths of cut (SKU 6789561-Tungaloy). How does compatibility with holders work? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the CCMT09T308 NS9530 will fit ISO-standard holders when these parameters match. Which chipbreaker should be chosen for smooth finishing? The one-sided chipbreaker on the CCMT09T308 NS9530 Tungaloy insert is recommended for stable, continuous finishing cuts where consistent chip control and surface quality are required. Is the insert coated? The CCMT09T308 NS9530 is an uncoated cermet grade; this supports a sharp edge for fine surface finishes rather than relying on a coating for wear resistance. How does the insert ensure accurate seating and clamping? The cylindrical hole with a one-sided countersink (40°–60°) on the CCMT09T308 NS9530 provides positive location and secure clamping in compatible ISO turning holders, improving stability during finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 NS9530 Wendeplatten - Tungaloy
Combine the NS9530 uncoated cermet’s fine-edge performance with ISO CCMT geometry for consistent, high-quality finishes and low cutting forces; ideal for continuous finishing turns. Order genuine inserts via Metav Werkzeuge or consult their technical team for application-specific advice. CCMT09T308 NS9530 Tungaloy indexable turning insert (uncoated cermet, 7° relief) The CCMT09T308 NS9530 Tungaloy is an ISO-standard rhombic indexable insert designed for finishing turning operations on steel. Uncoated cermet grade NS9530 for fine finishing Rhombic CCMT form, 0.8 mm nose radius 7° relief angle, 80° included angle Cylindrical hole with one-sided countersink Achieve superior surface finish with low cutting forces The uncoated cermet grade NS9530 is engineered for finishing applications where surface integrity and dimensional accuracy matter. With a sharp cutting edge and low built-in cutting forces, the insert reduces burr formation and supports extended tool life under continuous cutting conditions. This combination results in a reliably smooth surface without resorting to aggressive machining parameters, making it particularly suited to fine external and internal turning of steel components where a high-quality finish is the primary requirement. Stable performance for continuous and light-removed cuts Designed for continuous cutting and small depths of cut, the insert delivers consistent performance when paired with appropriate holder rigidity and cutting data. The one-sided chipbreaker assists chip control in stable setups, while the cermet substrate maintains edge integrity during prolonged finishing cycles. The geometry promotes low vibration susceptibility, so productivity improves through fewer rework cycles and reduced tool-change frequency — a rational efficiency gain for production-oriented workshops. ISO compatibility and mounting details for predictable setup Compatibility with standard toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert follows ISO CCMT geometry: rhombic form, size 09, nose radius 0.8 mm, thickness 3.97 mm and an included angle of 80°. The fixing hole is with a cylindrical hole and a one-sided countersink (40°–60°), so secure clamping and correct seat alignment in the matching holder are essential for repeatable results. These measurable parameters simplify tool selection and help avoid trial-and-error in the workshop. When this grade is the preferred choice Select this indexable insert for finishing passes where surface finish and low cutting forces are priorities, particularly in steady-state turning of steel with small feed and depth settings. The combination of NS9530 composition and CCMT geometry offers a pragmatic balance between finish quality and tool life. For applications with interrupted cuts or unstable setups, consider a grade and chipbreaker tailored to those conditions; Metav Werkzeuge’s technical advisers can help match toolholder and cutting data to the workpiece and machine dynamics. Contact Metav Werkzeuge for application advice and availability of genuine Tungaloy CCMT09T308 NS9530 inserts (SKU TUN6998617) and request tailored recommendations from their technical consultants Technical Data Article number: 6998617 Manufacturer SKU: TUN6998617 SKU: 6998617-Tungaloy Model series: ISO turning indexable inserts Application: Turning Dimensions & core data Size: 09 Thickness: 3.97 mm Nose radius: 0.8 mm Relief angle: 7° Included angle: 80° Hole: with hole Designs & special features Rhombic insert, CCMT geometry Uncoated cermet grade NS9530 One-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) ISO-standard insert interface FAQ Which materials is this insert suitable for? The NS9530 uncoated cermet grade is intended primarily for finishing steel; the insert’s low cutting-force behaviour supports fine surface results in continuous turning operations. How does the CCMT geometry affect holder compatibility? Holder compatibility is determined by the CCMT form, relief angle, tolerance and fastening dimensions; the CCMT09T308 format aligns with ISO-standard holders when the seat and clamp correspond to the insert’s size and thickness. What surface quality can be expected with a 0.8 mm nose radius? A 0.8 mm nose radius provides a favourable trade-off between surface finish and strength for finishing cuts, yielding smooth part faces while keeping cutting forces low. Is the insert coated? The insert is an uncoated cermet (NS9530), optimised for sharp-edge finishing on steel rather than coated wear resistance for roughing operations. What chip control does the insert provide? This variant features a one-sided chipbreaker, offering controlled chip formation in stable cutting conditions; selection of chipbreaker and cutting data should match workpiece material and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise NS9530 finishing performance, reliable uncoated cermet cutting edges and ISO compatibility for consistent surface quality and stable chip control; order directly via Metav Werkzeuge or request compatibility advice from our consultants. CCMT09T308 NS9530 turning insert — finishing insert by Tungaloy, 7° clearance The CCMT09T308 NS9530 is an ISO turning insert designed for finishing steel in continuous external and internal turning operations. Finishing-grade uncoated cermet NS9530 Rhombic CCMT geometry, 7° clearance Single-sided chipbreaker, 0.8 mm nose radius Compatible with ISO external and internal turning holders High-precision finishing for improved surface quality The insert delivers consistently low cutting forces and fine surface finishes thanks to the NS9530 uncoated cermet grade. As a finishing solution, the geometry is optimised for continuous cuts and small depths of cut; this means improved part finish and reduced need for secondary operations. For shops seeking measurable productivity gains, the combination of a sharp cutting edge and low cutting temperatures reduces chatter and contributes to longer tool life for repeatable results. The description of holder compatibility in the product specification clarifies that matching is determined by form, relief angle, tolerance class, fastening and size, ensuring predictable integration into established turning systems. Economy through predictable performance and process stability The rhombic CCMT shape with a defined 7° relief angle and a 0.8 mm nose radius supports stable metal removal in fine finishing passes, reducing scrap and rework. This stability translates into a favourable cost-benefit ratio where fewer rejected parts and less machine downtime are the direct outcomes. The single-sided chipbreaker aids controllable chip formation for the specified cutting conditions, which is particularly beneficial where continuous chip flow improves cycle times and workplace safety. Concrete numeric characteristics allow planners to calculate feeds and speeds with confidence and to estimate tool consumption more accurately. Compatibility and simple integration into existing tooling systems Designed as an ISO-standard insert, the CCMT09T308 format is compatible with a wide range of standard external and internal turning holders when matched by form, relief angle, tolerance and fastening. The insert includes a hole with a cylindrical hole and a one-sided countersink (40°–60°), enabling secure clamping and repeatable seating in indexable tool holders. With a plate thickness of 3.97 mm and ISO designation clearly stated, engineers can verify fitment quickly during tool setup planning. Clear identification of these features reduces setup time and minimises errors at the tool change stage. Suitable materials and recommended use cases The finishing grade is tailored for steel machining in continuous operations; select the NS9530 cermet when high surface integrity and low cutting forces are priorities. The insert is best applied in finishing passes on steels where a sharp, resilient edge yields the desired surface roughness without resorting to coated grades. For operations requiring different chip control or interrupted cuts, consult the chipbreaker and grade specifications to ensure suitability. Technical staff unfamiliar with cermet behaviour will find the defined geometry and clear ISO labelling useful for process planning and quality assurance. For reliable finishing performance with this Tungaloy cermet insert, contact Metav Werkzeuge for assistance with holder compatibility and application parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and next steps. Technical Data Article number: 6998441 SKU: 6998441-Tungaloy Manufacturer SKU: TUN6998441 Model series: ISO-Drehwendeschneidplatten Form: rhombic Core Data Nose radius: 0.8 mm Relief angle: 7° Included angle: 80° Thickness: 3.97 mm Size: 09 Special features Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: single-sided Hole style: cylindrical hole with single-side countersink 40°–60° Application: turning (external and internal) ISO designation: CCMT09T308 FAQ What materials is this insert designed for? The CCMT09T308 NS9530 insert is formulated as a finishing grade for steel; the uncoated NS9530 cermet provides a sharp cutting edge and low cutting forces suited to continuous steel turning. How does the chipbreaker affect performance? The single-sided chipbreaker on this Tungaloy insert promotes controlled chip formation during finishing cuts, supporting consistent surface quality and easier chip evacuation in uninterrupted turning operations. Which holders are compatible with the insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the ISO format and the CCMT geometry enable use with standard external and internal turning holders when these parameters match. What are the key dimensional data to check before mounting? Verify the 0.8 mm nose radius, 7° relief angle, 3.97 mm thickness and the CCMT09T308 ISO designation to ensure correct seating and clamping in the chosen tool holder. Is the insert suitable for interrupted cuts or roughing operations? This insert is optimised for finishing and continuous cuts; for interrupted cuts or heavy roughing, a different grade or geometry is recommended to ensure edge robustness and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high-precision finishing, low cutting forces and ISO-standard compatibility to improve turning consistency and part quality; order the CCMT09T308 NS9530 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308 NS9530 indexable turning insert — uncoated cermet for finishing, Tungaloy The CCMT09T308 NS9530 is an ISO-compliant rhombic indexable insert designed for precision turning and finishing of steel components. Rhombic CCMT geometry for versatile turning Uncoated cermet grade NS9530 for fine finishes Sharp cutting edge for low cutting forces 0.8 mm corner radius for small depths of cut Consistent finishing for precision turning The rhombic CCMT geometry combined with an uncoated cermet grade provides a predictably sharp cutting edge that reduces cutting forces and supports superior surface finish on steels. Cermet is a composite of hard ceramic particles and a metallic binder; this composition increases edge rigidity and wear resistance during continuous finishing cuts. For operations requiring small depths of cut and steady feeds, the insert’s 0.8 mm corner radius and sharp edge enable repeatable part tolerances and minimise rework. Compatibility and clamping for reliable production Compatibility with toolholders is governed by insert form, relief angle, tolerance class, clamping method, size and thickness; the insert’s 7° relief angle and 3.97 mm thickness suit standard ISO external holders and boring bars. The central cylindrical hole with a single-side countersink (40°–60°) ensures secure clamping and reliable seating in the pocket, reducing vibration and preserving the cutting edge. Specifying the correct holder geometry and clamping torque maintains tool life and dimensionally stable results across production runs. Productivity advantages and material suitability As a finishing grade optimised for steel, this insert is intended for continuous cuts and small material removals where surface quality and low cutting forces matter most. The uncoated cermet NS9530 delivers a balance of wear resistance and edge sharpness that is particularly useful on steels requiring high surface integrity. Selecting the appropriate chipbreaker and grade according to workpiece material, machining type and machine rigidity will ensure efficient chip control and consistent productivity without compromising finish. Contact Metav Werkzeuge for tailored machining advice on Tungaloy cermet inserts and to discuss holder compatibility or batch supply options; Metav Werkzeuge’s technical consultants are available to support process selection and application optimisation. Technical data Article number: 6735903 Manufacturer SKU: TUN6735903 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Insert designation: CCMT09T308 NS9530 Facts Size: 09 Corner radius: 0.8 mm Thickness: 3.97 mm Relief angle: 7° Insert angle: 80° Hole: cylindrical hole + single-side countersink (40°–60°) Special features Uncoated cermet grade NS9530 Rhombic insert shape (CCMT) One-sided chipbreaker Optimised for finishing cuts on steel ISO-compliant turning insert FAQ What materials is this insert suitable for? The CCMT09T308 NS9530 is specified as a finishing grade for steel and is optimised to deliver high surface quality on continuous turning operations. How does the uncoated cermet grade affect performance? The uncoated NS9530 cermet offers a sharp, wear-resistant edge suited to finishing; the ceramic-metal composition increases edge stability and supports consistent surface finishes in steels. Which holder features are required for correct compatibility? Compatibility depends on insert form, relief angle (7°), tolerance class, clamping method, size (09) and thickness (3.97 mm); the central cylindrical hole with countersink ensures correct seating in ISO-standard holders. What is the recommended application for the 0.8 mm corner radius? A 0.8 mm corner radius is ideal for small depths of cut and finishing passes where dimensional accuracy and surface integrity are priorities. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6735903 and the manufacturer SKU is TUN6735903 for the CCMT09T308 NS9530 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 NS9530 Wendeplatten - Tungaloy
Take advantage of an uncoated cermet grade that delivers a sharp cutting edge and consistently high surface quality in steel turning; order the CCMT09T308 NS9530 indexable insert directly via Metav Werkzeuge or consult our advisors for application support. CCMT 09T308 NS9530 indexable turning insert by Tungaloy — uncoated cermet, rhombic 80° geometry CCMT09T308 is an ISO-standard indexable turning insert designed for finishing operations in steel, suitable for both external and internal turning applications. ISO 09 insert for external and internal turning Uncoated cermet NS9530 for superior finish Rhombic geometry with 80° included angle 0.8 mm corner radius for fine finishing Achieve consistently superior surface finish with low cutting forces The uncoated cermet grade NS9530 is formulated as a finishing grade for steel, combining ceramic hardness with a metallic binder to maintain a sharp cutting edge and resist heat during continuous cuts. This results in low cutting forces, reduced tendency to vibrate and a measurable improvement in surface integrity compared with standard carbide grades. For operations with small depths of cut and stable setups, the insert’s material composition promotes repeatable part quality and fewer secondary finishing steps. Secure fit and defined geometry for reproducible machining The insert follows ISO-standard dimensions and must be matched to an appropriate toolholder; compatibility depends on insert form, relief angle, tolerance class, clamping and thickness. With a 7° relief and a rhombic profile that yields an 80° included angle, the geometry balances cutting edge strength and access to tight contours. The plate thickness of 3.97 mm and a 0.8 mm radius are optimised for finishing passes where a narrow contact zone is required to preserve dimensional accuracy and achieve consistent part faces. Practical integration in the turning system and versatile finishing use As part of an ISO turning system, the insert is used with a matching external holder or boring bar plus a shim and clamping kit; the central hole with a cylindrical bore and one-sided countersink (40°–60°) ensures reliable positioning and torque transmission. The single-sided chipbreaker provides controlled chip formation in continuous cuts, simplifying chip evacuation and reducing risks in long turning cycles. The carbide substrate remains robust under typical finishing speeds, making the insert a practical choice for machine shops seeking productive, high-quality turning in steel. For precise finishing with Tungaloy CCMT09T308 NS9530 inserts, contact Metav Werkzeuge for tailored recommendations and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6789571 Manufacturer SKU: TUN6789571 SKU: 6789571-Tungaloy ISO designation: CCMT09T308 Core data Size: 09 Thickness: 3.97 mm Relief angle: 7° Corner radius: 0.8 mm Included angle: 80° Special features Uncoated cermet grade NS9530 Rhombic insert form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker For turning (external and internal) Carbide substrate FAQ Which materials is this insert best suited for? The CCMT09T308 NS9530 insert from Tungaloy is optimised for machining steel, particularly where a finishing grade with low cutting forces and excellent surface quality is required. Can the insert be used for internal as well as external turning? Yes, the rhombic geometry and ISO sizing make the insert suitable for both external and internal turning when paired with the correct holder and mounting accessories. What does the 0.8 mm radius mean for surface finish? A 0.8 mm corner radius provides a small contact area that helps achieve a finer surface finish while maintaining edge strength appropriate for finishing passes. How is the insert secured in the holder? The insert features a central cylindrical hole with a one-sided countersink (40°–60°); secure clamping requires a matching toolholder, shim and clamping kit to ensure positional accuracy and stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T505 Wendeplatten - Tungaloy
Benefit from the CVD-coated T505 grade and ISO compatibility to achieve economical, repeatable cast-iron turning with stable chip control; combine 0.8 mm corner radius and a rhombic 80° approach angle for reliable surface finish and insert life. Order the CCMT09T308 insert directly via Metav Werkzeuge or ask the consultants if needed. CCMT09T308 T505 ISO turning insert by Tungaloy — CVD-coated carbide for cast iron CCMT09T308 T505 is an ISO-standard rhombic turning insert designed for external and internal turning applications, optimised for economic machining of cast iron with a one-sided chipbreaker. CVD-coated carbide (T505) for cast iron ISO rhombic insert, size 09 0.8 mm corner radius for versatile profiling Cylindrical hole with 40°–60° countersink Increase productivity through proven coating and grade The combination of a CVD-coated surface and the T505 carbide grade delivers wear resistance suited to medium-duty turning of cast iron, so productive cutting intervals are extended and tool changes are less frequent. The economical material choice supports a favourable cost-in-use profile while preserving edge stability under interrupted cuts. For workshops seeking reliable cycle times, the indexable insert reduces downtime by enabling fast indexing and consistent cutting geometry. Achieve secure clamping and consistent geometry for repeatable parts A rhombic ISO form with an 80° approach angle and a 7° clearance promotes controlled cutting forces and predictable chip flow, which benefits both external and internal turning. The insert’s cylindrical hole with a single-sided countersink (40°–60°) ensures stable seating in compatible holders and straightforward replacement of screws and clamping sets. Compatibility to the holder is governed by shape, clearance angle, tolerance class, fastening method, size and thickness, so matching the correct external holder or boring bar secures repeatable process results. Balance surface finish and strength with a 0.8 mm corner radius The modest 0.8 mm corner radius offers a compromise between component integrity and surface quality: small enough to produce neat profile lines and good finishes, yet large enough to distribute cutting loads and resist edge chipping. With a plate thickness of 3.97 mm and the rhombic geometry, the cutting edge supports stable machining even when light interruptions occur. The single-sided chipbreaker is tuned to the T505 grade for effective chip control in cast-iron applications, reducing manual intervention and promoting safer swarf handling. Practical selection and application guidance for workshop planners Selection of this indexable plate should consider workpiece material, machine rigidity and desired cutting speed; the combination of ISO-standard sizing and the Tungaloy grade simplifies procurement and inventory management. The insert is intended for economic cast-iron turning; pairing the plate with an appropriate holder and the correct clamping set ensures the expected process security and surface quality. Technical teams benefit from clear, measurable specifications when planning tool lists or preparing process sheets. For economical and dependable cast-iron turning with Tungaloy’s T505 grade, contact Metav Werkzeuge for application advice and ordering — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical data Manufacturer article number: 6793672 SKU: 6793672-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Brand: Tungaloy Core specifications Insert designation: CCMT09T308 Size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Approach angle: 80° Clearance angle: 7° Hole style: with hole Hole detail: cylindrical hole + single-sided countersink (40°–60°) Features CVD-coated carbide, grade T505 Rhombic plate geometry One-sided chipbreaker Designed for turning (external and internal) Suitable for cast iron applications Compatibility depends on form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? This insert is formulated for the economic machining of cast iron; the CVD-coated T505 grade provides wear resistance and effective chip control for such materials. Which insert designation and SKU should be ordered for this plate? Order the CCMT09T308 turning insert, SKU 6793672-Tungaloy, which identifies the ISO form, size and the Tungaloy T505 grade. How does the hole and countersink affect mounting stability? The cylindrical hole with a single-sided countersink (40°–60°) ensures stable seating in compatible clamping sets and reduces the risk of rotation under load when the correct screws and underlay are used. What is the effect of the 0.8 mm corner radius on component finish? A 0.8 mm corner radius balances strength and surface quality, helping to deliver consistent finishes while offering improved edge durability compared with very small radii. Is this insert compatible with standard ISO holders? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening and thickness; the plate follows ISO norms, so pairing with appropriately specified external holders or boring bars is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide substrate, a 0.8 mm corner radius and ISO compatibility for reliable cast iron turning and stable chip control; order the insert directly via Metav Werkzeuge or consult the team for selection and batch supply. CCMT09T308 T5115 Tungaloy – rhomboid turning insert for turning The CCMT09T308 T5115 is a rhomboid ISO turning insert designed for external and internal turning applications, optimised as a universal grade for cast iron machining. CVD-coated carbide for high wear resistance Universal T5115 grade for cast iron machining Rhomboid CCMT shape with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Proven wear resistance and edge stability for consistent metal removal The combination of a CVD-coated carbide substrate and the T5115 grade delivers a balance of wear resistance and edge stability that supports uninterrupted production in cast iron turning. The coating enhances thermal resistance and reduces flank wear under interrupted cuts, while the substrate maintains toughness during heavy cuts. As a result, tool life is extended and the mean time between insert changes is increased, which reduces downtime and contributes to predictable cycle times on turning centres and lathes. ISO conformity and clamping design for repeatable set-up Being an ISO-design insert in the CCMT format, compatibility with the toolholder is governed by form, 7° relief angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with a single-sided 40°–60° countersink, ensuring secure clamping and repeatable seating in compatible holders. The plate dimensions — size 09 and a thickness of 3.97 mm — together with the standardised geometry simplify spare-part management and make it straightforward to match the insert to appropriate external holders or boring bars for consistent setup accuracy. Practical advantages for process stability and chip control The 0.8 mm corner radius provides a compromise between edge strength and finish, supporting stable cutting in less rigid set-ups while still enabling acceptable surface quality. The insert’s single-sided chipbreaker geometry is tailored for chip control in cast iron; selecting the correct chipbreaker and cutting data according to workpiece rigidity and machining strategy will reduce built-up edge and improve swarf evacuation. In typical system assemblies the insert is used with a matching outer holder or boring bar, an underlay/clamp set and replacement screws, enabling rapid exchange and minimal rework in production environments. For secure procurement and application advice on the Tungaloy CCMT09T308 T5115 insert, contact Metav Werkzeuge for product availability and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6864292 Manufacturer SKU: TUN6864292 SKU: 6864292-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: CCMT09T308 T5115 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Relief angle: 7° Thickness: 3.97 mm Size: 09 Included angle: 80° Special features Material: carbide Grade/coating: T5115, CVD-coated Plate form: rhomboid (CCMT) Chipbreaker: single-sided Hole style: cylindrical hole with one-sided countersink (40°–60°) ISO designation: CCMT09T308 Typical application: external and internal turning of cast iron System components: insert, matching outer holder or boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert intended for? The CCMT09T308 T5115 is a universal grade optimised for cast iron machining; the T5115 composition balances wear resistance and edge stability for that material group. Which holders are compatible with this ISO insert? Compatibility is defined by the CCMT form, 7° relief angle, tolerance class, fastening method, size 09 and a plate thickness of 3.97 mm; matching holders and boring bars that accept CCMT inserts will be suitable. How does the CVD coating affect performance? A CVD-coated carbide insert like this one improves thermal resistance and wear behaviour during continuous and interrupted cuts, leading to longer tool life and more consistent surface finish when turning cast iron. Is the chipbreaker appropriate for heavy stock removal? The single-sided chipbreaker is designed for efficient chip control in cast iron; for heavy roughing, selecting an appropriate cutting edge condition and stable clamping will ensure process reliability. Can the corner radius be changed for different surface finish requirements? This SKU features a 0.8 mm corner radius; for finer surface finish a smaller radius insert would be recommended where data and holder compatibility allow. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T515 Wendeplatten - Tungaloy
Take advantage of a hardened, CVD-coated carbide grade for economical cast iron turning and the stability offered by a rhombic ISO insert with a 0.8 mm corner radius; order supply or request technical cutting data from Metav Werkzeuge for a fast, reliable upgrade to production. CCMT09T308 T515 turning insert by Tungaloy — CVD-coated carbide, for cast iron machining CCMT09T308 T515 is a rhombic ISO turning insert designed for efficient external and internal turning, compatible with standard CCMT holders and clamping systems CVD-coated carbide T515 Optimised for cast iron turning Rhombic CCMT 09 insert geometry 0.8 mm corner radius, 7° relief High productivity for cast iron with a cost-conscious carbide grade The CVD-coated grade T515 is formulated for the economical machining of cast iron, delivering a balance of wear resistance and edge stability. Using a CVD coating over a cemented carbide substrate increases thermal resilience and reduces flank wear during continuous cutting, which supports longer tool life and fewer insert changes. For process planning, the thermal and tribological properties of the coating enable higher material removal rates on stable setups, so cycle times and per-part machining costs can be reduced without compromising component quality. ISO compatibility and secure clamping reduce setup risk Marked as an ISO CCMT insert, compatibility with a toolholder is governed by form, relief angle, tolerance class, fastening method, nominal size and plate thickness. The designation CCMT09T308 identifies geometry and tolerance so toolrooms can check holder fit quickly and avoid mis-matching. The 7° clearance angle and standardised dimensions ensure repeatable clamping and predictable cutting engagement, which contributes to stable cutting forces and consistent surface finish across batches. Further cutting data and holder recommendations are available from Metav Werkzeuge to support integration into existing tool systems. Controlled chip formation and predictable edge life for reliable turning The insert’s rhombic shape combined with a one-sided chipbreaker promotes efficient chip control during both external and internal operations. A 0.8 mm corner radius provides a compromise between edge strength and surface finish, permitting modest depth of cut increases while protecting the cutting edge from shock in interrupted cuts. The central cylindrical hole with a single-side countersink (40°–60°) allows secure screw clamping and simple replacement procedures, reducing machine downtime. These design aspects translate into reproducible part tolerances and reduced process variation in daily production. For technical advice, application-specific cutting data or to secure supply of Tungaloy turning inserts such as CCMT09T308, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Manufacturer article number: 6739799 SKU: 6739799-Tungaloy Manufacturer SKU: TUN6739799 Model series: ISO-Drehwendeschneidplatten Designation: CCMT09T308 Facts Corner radius: 0.8 mm Thickness: 3.97 mm Insert size: 09 Clearance angle: 7° Lead/approach angle: 80° Special features Material: carbide Coating / grade: T515 (CVD-coated carbide) Shape: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Application: turning, optimised for cast iron FAQ What materials is this insert best suited for? This insert is optimised for cast iron machining; the T515 CVD-coated carbide grade and the insert geometry provide reliable performance on a broad range of grey and ductile cast irons. How does the CCMT geometry affect holder compatibility? The CCMT09T308 ISO designation defines form, size and thickness so that compatibility depends on matching holder form, fastening style, tolerance class and plate thickness for secure clamping. What benefits does the CVD coating provide? The CVD-coated surface increases thermal resistance and wear protection on the cutting edge, which helps maintain dimensional accuracy and extends edge life in continuous turning operations. Can this insert tolerate interrupted cuts? The 0.8 mm corner radius and robust carbide substrate offer improved edge strength that tolerates light to moderate interrupted cutting; selection of chipbreaker and cutting parameters should match the application and machine rigidity. Is the insert suitable for internal and external turning? Yes; the rhombic shape and single-sided chipbreaker make the insert versatile for both external and internal turning when used with the appropriate holder and cutting data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T6215 carbide grade and precise geometry for efficient stainless steel turning; the insert delivers stable chip control and long tool life under stable to lightly interrupted cuts. Order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. CCMT09T308 T6215 rhombic turning insert by Tungaloy — CVD-coated carbide for stainless steel The CCMT09T308 T6215 is a CVD-coated indexable insert designed for turning applications on stainless steel under stable to slightly interrupted machining conditions, compatible with ISO holders matching form, clearance and tolerance. CCMT09T308 rhombic insert, 80° geometry CVD-coated carbide grade T6215 for stainless steel 0.8 mm nose radius for fine surface finishes Cylindrical hole with single-side chipbreaker Consistent high-performance machining of stainless steel The combination of a CVD-coated surface and the T6215 carbide matrix yields a wear-resistant cutting edge optimised for the demands of machining stainless steel. This treatment improves thermal and abrasive resistance, which in turn prolongs edge life and reduces the frequency of insert changes. For production environments where uptime and predictable tool life matter, the coating and substrate pairing support higher cutting parameters while maintaining consistent results. The ISO-designated insert is aimed at external and internal turning tasks, where stable chip formation and controlled wear are priorities. Geometry engineered for repeatable accuracy and surface quality Featuring an 80° rhombic shape with a 0.8 mm nose radius and a 7° clearance angle, the insert provides a balanced contact zone that supports dimensional stability and surface finish. The 3.97 mm plate thickness adds stiffness in the clamp, reducing vibration in medium-duty turning operations. The cylindrical hole with one-sided countersink (40°–60°) ensures secure fastening in the pocket and consistent seat position, which is essential for repeatable tool offsets and reliable toolpath programming. These geometric details translate into fewer regrinds and more predictable cycle times. Durable chip control and process efficiency A single-sided chipbreaker matched to the grade helps evacuate chips effectively and reduces the risk of built-up edge when machining stainless steel. Under stable to slightly interrupted cutting, this design promotes steady chip flow and lowers the chance of surface damage, so cycle times remain efficient and downstream processes benefit from improved workpiece quality. When considered against throughput, the robust edge preparation and coating deliver a favourable tool-life-to-cost ratio, helping to lower overall machining costs in batch production and intermittent series. System compatibility and straightforward handling The insert integrates into standard ISO turning systems: an insert body, matched external holder or boring bar, backing/clip set and replacement screws form the complete assembly. Compatibility depends on insert form, clearance, tolerance class, fixing method, size and thickness; verifying these parameters with the chosen holder ensures correct seating and safe clamping. Spare screws and underplates should match the insert hole and countersink style for reliable mounting. For applications requiring adaptation—such as light interruptions or mixed material batches—adjusting cutting data and selecting the appropriate chipbreaker variant will maintain process security. For demanding stainless steel turning, contact Metav Werkzeuge to order the Tungaloy CCMT09T308 T6215 insert and request personalised application advice Technical Data Article number: 6945219 Manufacturer SKU: TUN6945219 SKU: 6945219-Tungaloy Model series: ISO indexable turning inserts Material: carbide Manufacturer: Tungaloy Facts Geometry: 80° Nose radius: 0.8 mm Clearance (relief) angle: 7° Plate thickness: 3.97 mm Size: 09 Special features ISO designation: CCMT09T308 Coating: CVD-coated Grade: T6215 Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning of stainless steel Intended system components: insert, suitable external holder or boring bar, backing/klemmsatz, replacement screws FAQ What materials is this insert intended for? The CCMT09T308 T6215 insert is formulated for machining stainless steel, offering enhanced wear resistance and chip control suited to that material class. Is the insert compatible with standard ISO holders? Compatibility is determined by insert form, clearance angle, tolerance class, fixing and thickness; the CCMT09T308 is ISO dimensioned and fits holders designed for CCMT inserts when those parameters match. What benefits does the T6215 grade provide? The T6215 CVD-coated carbide grade delivers good wear resistance and stable cutting behaviour for turning operations on stainless steel under stable to slightly interrupted conditions. How does the chipbreaker affect performance? The single-sided chipbreaker promotes consistent chip formation and evacuation, reducing built-up edge risk and improving surface quality in continuous turning. Which cutting data adjustments are recommended for stainless steel? When using the CCMT09T308 T6215 insert, moderate speeds and increased feed for thermal stability, together with appropriate coolant strategy, will typically yield the best compromise between productivity and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control and ISO compatibility for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. CCMT 09T308 T6215 turning insert by Tungaloy — CVD-coated carbide, rhombic 80° form CCMT09T308 T6215 is a CVD-coated carbide turning insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 for wear resistance ISO rhombic CCMT form with 80° included angle Single-sided chipbreaker for consistent chip control Cylindrical hole with single-side countersink (40°–60°) Durable grade and productivity gains for stainless steel machining The T6215 grade is a CVD-coated carbide developed to deliver wear-resistant performance when turning stainless steel under steady or slightly interrupted conditions. The coating improves abrasive resistance and heat tolerance, which reduces flank wear and extends usable life; this leads to fewer indexings and lower tooling cost per component. Where consistent material removal rate and repeatable batch results are required, the combination of substrate and coating provides a predictable tool life that supports continuous production. ISO compatibility and secure mounting for predictable results Designed as an ISO CCMT09T308 insert, the geometry is rhombic with an 80° included angle and a 7° clearance, ensuring compatibility with standard CCMT holders when form, clearance, tolerance class, fastening, size and thickness match. The insert features a cylindrical hole with a single-side countersink (40°–60°) to suit common clamping systems. These mechanical details simplify integration into existing toolholders and minimise setup variability, contributing to stable cutting conditions and reproducible component quality. Chip control and surface quality with a single-sided chipbreaker The single-sided chipbreaker geometry is tailored to promote stable chip formation and evacuation in turning operations. By pairing the chipbreaker with the appropriate grade and cutting parameters, the tool supports improved surface finish and reduced risk of built-up edge when machining stainless steels. The controlled chip flow also reduces the likelihood of re-cutting, helping to protect the workpiece surface and preserve dimensional accuracy during longer cycles. Practical dimensions and mechanical strength for everyday use With a nominal size of 09, a plate thickness of 3.97 mm and a corner radius of 0.8 mm, the insert balances rigidity with cutting edge definition. The 0.8 mm corner radius offers a compromise between edge strength and surface finish capability, suitable for general turning tasks where durability and acceptable finish are required. Integration into a typical system—insert, compatible external holder or boring bar, shim/clamp set and replacement screws—ensures straightforward maintenance and fast index changes at the machine. Contact Metav Werkzeuge today for tailored advice on integrating the CCMT09T308 T6215 turning insert by Tungaloy into existing tool systems or to request a quote through Metav Werkzeuge Technical data Article number: 6876407 Manufacturer SKU: TUN6876407 SKU: 6876407-Tungaloy Model series: ISO turning inserts Material: carbide Grade/coating: T6215, CVD-coated Application: turning Core data Size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Relief (clearance) angle: 7° Included angle: 80° Hole: cylindrical hole + single-side countersink (40°–60°) Special features Rhombic plate form (CCMT) Single-sided chipbreaker Grade T6215 for stainless steel machining CVD-coated carbide substrate Suitable for external and internal turning Compatibility depends on form, clearance, tolerance, fastening, size and thickness FAQ What workpieces is this insert best suited to? The CCMT09T308 T6215 insert is optimised for machining stainless steel under stable to slightly interrupted cutting conditions, offering good wear resistance and chip control for typical turning applications. How does the T6215 grade improve process reliability? The T6215 CVD-coated carbide provides improved abrasive resistance and thermal stability, which extends tool life and supports consistent batch-to-batch performance when used with the correct cutting data. Which holder features ensure correct compatibility? Compatibility requires a matching CCMT holder regarding form, clearance angle, tolerance class, fastening method, size and plate thickness; the rhombic geometry and hole style are standard for CCMT applications. What is the effect of the 0.8 mm corner radius on machining? A 0.8 mm corner radius increases edge strength, reduces chipping risk and contributes to stable cutting forces, while still allowing acceptable surface finish for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of reliable tool life, consistent chip control and ISO compatibility for efficient stainless-steel turning operations; order the CCMT09T308 T6215 Tungaloy turning insert directly via Metav Werkzeuge or consult our technical team for application guidance. CCMT 09T308 T6215 — CCMT turning insert for Drehen by Tungaloy, 80° rhombic, 0.8 mm radius CCMT09T308 T6215 is an ISO rhombic turning insert engineered for productive external and internal turning in stainless steels under stable to lightly interrupted conditions CVD-coated carbide grade T6215 Designed for machining stainless steel Rhombic 80° geometry, 0.8 mm nose radius Single-sided chipbreaker, with mounting hole Productive turning performance for stainless steels The CVD-coated carbide composition and the T6215 grade deliver a balanced combination of wear resistance and edge stability that suits continuous and slightly interrupted turning. The 80° rhombic geometry with a 0.8 mm nose radius provides a robust cutting edge that reduces the risk of chipping while maintaining the capacity for controlled material removal. This results in consistent cycle times and reliable component quality, especially when machining corrosion‑resistant alloys and other challenging stainless-steel grades. Secure clamping and ISO compatibility for quick changeovers Designed as an ISO turning plate, the insert fits into standard holders when form, relief angle, tolerance class, fastening method, size and thickness match. The plate’s thickness of 3.97 mm, the cylindrical hole with one-sided countersink (40°–60°) and the defined geometry ensure repeatable seating and safe clamping. The single-sided chipbreaker supports predictable chip formation, simplifying process setup and minimising downtime during index changes — a practical advantage in batch production and mixed-lot turning. Practical handling and operational benefits The rhombic shape and central bore allow flexibility for both external and internal operations with straightforward indexation. The single-sided chipbreaker helps to control chip flow in stainless-steel turning, improving surface finish and reducing tool marks. Because the insert is supplied as an ISO-compatible plate, inventory management and tooling standardisation are simplified, supporting efficient workshop logistics and reduced set-up complexity for production teams. Application guidance and process optimisation For best results with this turning plate, pair the geometry and T6215 grade with a holder that matches the plate’s relief angle and tolerance class. Select cutting parameters appropriate for stainless steels — moderate cutting speeds with stable feeds and adequate coolant — to exploit the insert’s wear-resistant coating while avoiding thermal work hardening. The combination of predictable chip control and a robust edge provides an attractive cost‑per‑part balance in many industrial turning applications. Contact Metav Werkzeuge for tailored machining advice on the Tungaloy CCMT09T308 T6215 insert and to secure the right inventory and delivery options for immediate production needs Technical data Article number: 6876260 Manufacturer SKU: TUN6876260 Seller SKU: 6876260-Tungaloy Model series: ISO turning inserts Facts Nose radius: 0.8 mm Plate thickness: 3.97 mm Included angle: 80° Free relief angle: 7° Plate size: 09 Special features CVD-coated carbide, grade T6215 Single-sided chipbreaker Rhombic plate form, ISO CCMT09T308 designation Cylindrical hole with one-sided countersink (40°–60°) Intended application: turning, external and internal Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness Suitable for machining stainless steel under stable to lightly interrupted conditions FAQ What material range is suitable for this insert? The CCMT09T308 T6215 turning insert by Tungaloy is optimised for stainless steel machining and performs well under stable to lightly interrupted cutting conditions. Which holders are compatible with this ISO plate? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the CCMT09T308 designation follows ISO dimensions for rhombic turning inserts. How does the T6215 grade affect tool life? The T6215 CVD-coated carbide offers enhanced wear resistance and edge stability, which contributes to longer tool life and consistent part quality in stainless-steel turning. Is the insert suitable for internal turning as well as external turning? Yes, the rhombic geometry and central bore design allow the insert to be used for both external and internal turning operations when installed in the appropriate holder (SKU: 6876260-Tungaloy). What chip control can be expected from this plate? The single-sided chipbreaker provides predictable chip formation for improved surface finish and safer chip evacuation during stainless-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD‑coated T6215 grade and the CCMT09T308 geometry deliver consistent edge life and good surface finish when turning rostfreier Stahl under stable to mildly interrupted conditions; reliable clamping and ISO conformity ensure compatibility with standard holders. Order the CCMT09T308 T6215 turning insert directly via Metav Werkzeuge or consult the Metav team for application advice. CCMT 09T308 T6215 Turning Insert — Tungaloy CVD‑coated carbide for turning CCMT09T308 T6215 Tungaloy turning insert is an ISO‑standard rhombic indexable insert designed for external and internal turning of rostfreier Stahl where stable or slightly interrupted cuts are expected CVD‑coated carbide for high wear resistance ISO rhombic CCMT 09 geometry, 7° clearance 0.8 mm corner radius for versatile turning Cylindrical hole with single‑side countersink Long‑lasting performance for rostfreier Stahl machining The CVD‑coated T6215 grade brings a wear‑resistant surface that extends tool life and maintains cutting edge integrity during continuous production runs. Because the grade is formulated specifically for machining rostfreier Stahl, the wear behaviour and thermal stability are balanced to reduce flank and crater wear under steady to mildly interrupted cutting conditions. This results in fewer insert changes, more predictable tool life and a consistently improved surface finish on turned components. Geometry and fit for dependable toolholding The rhombic CCMT09T308 geometry with an included angle of 80° and a 7° clearance supports a stable cutting edge and efficient chip flow in both external and internal turning operations. The 0.8 mm corner radius provides a compromise between edge strength and dimensional control, suitable for a wide range of turning passes. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure clamping in compatible holders; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness, so matching the insert to the holder is essential for repeatable results. Practical advantages and recommended use With a single‑sided chipbreaker and a thickness of 3.97 mm, this ISO insert is part of a system comprising the indexable plate, an outer holder or boring bar, underlay/clamp set and replacement screws — components that together determine rigidity and process stability. The insert is best applied where steady cutting conditions are achievable; selecting the correct chipbreaker and grade for the workpiece material and machining stability will reduce vibration, improve tool life and enhance surface quality. For technical queries on cutting data, holder selection or process setup, Metav Werkzeuge provides application support to match the insert to production needs. For optimised rostfreier Stahl turning with the Tungaloy T6215 grade, contact Metav Werkzeuge for tailored application advice and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6876211 SKU (manufacturer): TUN6876211 SKU: 6876211-Tungaloy ISO designation: 09T308 Insert designation: CCMT09T308 Facts Insert size: 09 Included angle: 80° Clearance (relief) angle: 7° Corner radius: 0.8 mm Thickness: 3.97 mm Special features CVD‑coated carbide (T6215) Single‑sided chipbreaker Rhombic ISO indexable insert With cylindrical hole + single‑side countersink (40°–60°) Intended application: turning rostfreier Stahl System: insert, outer holder/boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert suitable for? The CCMT09T308 T6215 turning insert is specified for machining rostfreier Stahl and performs best under stable to mildly interrupted cutting conditions. Which holder types are compatible with the CCMT09T308 geometry? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the CCMT09T308 fits standard ISO‑compatible holders and boring bars designed for rhombic CCMT inserts. What does the T6215 designation mean for performance? T6215 denotes a CVD‑coated carbide grade tuned for wear resistance and stable cutting when turning rostfreier Stahl, offering extended edge life in continuous operations. How does the 0.8 mm corner radius affect machining results? A 0.8 mm radius increases edge strength compared with finer radii, reducing chipping risk while still allowing good dimensional control in general turning passes. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6876211 and the product SKU is 6876211‑Tungaloy (manufacturer SKU TUN6876211). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade designed for stainless‑steel turning, the precise 0.8 mm nose radius for fine finishes, and a stable rhombic 80° geometry that fits ISO toolholders; order directly via Metav Werkzeuge or ask the consultants for application support. CCMT09T308 T6215 — Tungaloy indexable turning insert, CVD‑coated carbide, 0.8 mm radius A CCMT09T308 T6215 indexable insert engineered for stable stainless‑steel turning and fine finishing across a range of production setups CVD‑coated carbide for stainless‑steel turning Precision 0.8 mm nose radius for fine finishes Rhombic 80° geometry with 7° clearance Cylindrical hole with 40°–60° countersink Consistent metal‑cutting performance for stainless steel The combination of a CVD‑coated surface and a wear‑resistant carbide substrate in grade T6215 provides a balance between tool life and edge strength when machining stainless steel under stable or mildly interrupted conditions. The coating reduces adhesive wear and enhances thermal resistance; this means longer intervals between indexings and fewer unscheduled tool changes. For production environments seeking predictable cycle times, the coated substrate offers measurable improvements in process stability and surface quality compared with uncoated alternatives. Geometry and edge form that support accurate finishing The rhombic 80° geometry and 0.8 mm nose radius concentrate the cutting forces into a controlled contact area, improving finish and dimensional repeatability on shafting and form features. The 7° clearance angle reduces rubbing on shoulders and minimises built‑up edge formation during low‑to‑medium cutting speeds. The single‑sided chipbreaker helps to direct chips away from the cutting zone, lowering the risk of re‑cutting and easing evacuation in turning operations. These design elements translate into reduced rework and a more consistent surface finish. Compatibility, handling and shopfloor advantages ISO conformity of the insert means compatibility is determined by form, clearance, tolerance class, fixing method, size and thickness; matching the insert to a suitable external holder or boring bar ensures secure clamping and reliable results. The central cylindrical hole with a one‑side countersink (40°–60°) facilitates straightforward seating and repeatable clamping torque. The insert’s 3.97 mm thickness and standard 09 size allow straightforward replacement in common insert pockets, supporting rapid changeovers and minimal setup time for batch production. For challenging stainless‑steel turning tasks, contact Metav Werkzeuge to discuss the Tungaloy T6215 insert and request tailored cutting data or application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6945210 Manufacturer SKU: TUN6945210 Name: CCMT09T308 T6215 Tungaloy indexable insert Model series: ISO turning indexable inserts Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.8 mm Approach angle: 80° Clearance angle: 7° Hole: with cylindrical hole Special features Rhombic insert shape Single‑sided chipbreaker Cylindrical hole + one‑side countersink (40°–60°) CVD‑coated carbide, grade T6215 Application: turning, suitable for stainless‑steel under stable to slightly interrupted cuts Compatible with ISO external holders and boring bars FAQ What materials is this insert best suited for? The CCMT09T308 T6215 insert is optimised for stainless‑steel machining; the CVD coating and carbide substrate provide wear resistance and thermal stability for turning operations in rostfreiem Stahl. Can this insert be used in interrupted cuts? Yes, the T6215 grade is formulated for stable to slightly interrupted conditions; however, for heavy interruptions or highly unstable set‑ups a more robust geometry or different grade should be considered. Which holders accept this insert? Holders that conform to the relevant ISO external turning insert standards and match the CCMT form, size 09, thickness 3.97 mm and 80° approach angle will accept this insert; ensure the pocket accommodates the cylindrical hole and countersink for secure clamping. Is the chipbreaker suitable for long, continuous lengths? The single‑sided chipbreaker directs chips reliably in many turning applications and aids evacuation during continuous cuts, improving process stability and surface consistency. What are the identifying numbers for ordering and traceability? The product is listed as CCMT09T308 T6215 Tungaloy indexable insert, article number 6945210 and manufacturer SKU TUN6945210. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a 0.8 mm corner radius for reliable wear resistance and consistent productivity; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific selection. CCMT 09T308 T9215 Tungaloy insert — ISO turning insert for external and internal turning A CCMT09T308 T9215 ISO turning insert engineered for medium-steel turning with a single-sided chipbreaker and cylindrical hole for secure clamping CVD-coated carbide T9215 Optimised for medium steel turning Single-sided chipbreaker design 7° clearance; cylindrical hole & countersink Durable grade for increased production rates The CVD-coated carbide T9215 brings a balanced combination of wear resistance and fracture toughness, making it suitable for continuous to light interrupted cutting in medium-strength steels. The coating reduces flank wear and maintains cutting-edge integrity, which translates into longer tool life and fewer insert changes on the shop floor. As a result, machining cycles become more predictable and cycle-time improvements are realised without compromising component tolerances. This turning grade supports higher feed rates and contributes to measurable productivity gains in serial production. Precision geometry for consistent surface finish and secure clamping The rhombic CCMT geometry with an included angle of 80°, a corner radius of 0.8 mm, and 7° clearance is designed to deliver reliable edge strength and good contact conditions in both external and internal turning. The insert thickness of 3.97 mm and the cylindrical hole with single-side countersink (40°–60°) ensure positive clamping and repeatable seating in ISO-compatible holders. These features reduce vibration and help achieve a stable cutting zone, which supports improved surface quality and tighter dimensional control in finished parts. Practical selection and lifecycle advantages for production shops With a single-sided chipbreaker matched to the grade, this insert enables efficient chip formation for medium-steel applications and simplifies inventory management by focusing on a versatile grade. Compatibility depends on holder form, clearance, tolerance class, attachment method, size and thickness; the typical system includes an ISO turning holder, a shim or clamp set and replacement screws. The combination of stable chip control and a robust substrate results in longer tool life and consistent results, lowering total machining costs and downtime in manufacturing environments. Metav Werkzeuge consultants can support selection for specific workpiece materials and machining conditions. For high-productivity medium-steel turning with Tungaloy's T9215 grade, contact Metav Werkzeuge for tailored selection and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777811 Manufacturer SKU: TUN6777811 Metav SKU: 6777811-Tungaloy Designation: CCMT09T308 T9215 Model series: ISO turning inserts Manufacturer: Tungaloy Specifications Size: 09 Corner radius: 0.8 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 80° Hole: cylindrical hole + single-side countersink (40°–60°) Features / Applications Material: CVD-coated carbide (T9215) Chipbreaker: one-sided Typical use: external and internal turning Compatible with ISO turning holders, shim and clamp sets Suitable for medium steel, continuous to light interrupted cuts FAQ What materials is this insert best suited for? The CCMT09T308 T9215 Tungaloy insert is optimised for medium steels and performs well in continuous to light interrupted cutting conditions. Which chip control is provided with this grade? This insert features a single-sided chipbreaker designed to produce stable chip forms when machining medium-strength steel, contributing to reliable material evacuation. What are the key geometric details for holder compatibility? Size 09, 0.8 mm corner radius, 3.97 mm thickness and a cylindrical hole with single-side countersink are the primary dimensions to check against an ISO turning holder. Is this grade suitable for interrupted cuts? The T9215 grade combines wear resistance with fracture toughness and is suitable for continuous machining and light interruptions rather than heavy interrupted cuts. How does the insert support consistent surface finish? The combination of rhombic geometry, 7° clearance and secure clamping of the CCMT09T308 helps reduce vibration and maintain cutting-edge stability for better surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated T9215 grade with the rhombic CCMT geometry yields a cost-effective, high-productivity solution for medium-steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application matching. CCMT 09T308 T9215 indexable turning insert — rhombic CCMT, 0.8 mm corner radius (Tungaloy) CCMT09T308 T9215 is an ISO-standard indexable insert for external and internal turning, optimised for medium-steel machining and continuous to lightly interrupted cuts. CVD-coated carbide T9215 grade ISO rhombic CCMT 09 form 0.8 mm corner radius for versatile finishing Cylindrical hole with 40°–60° countersink High productivity through wear-resistant grade and coating The T9215 grade, a CVD-coated carbide, is specified for medium-steel applications where a balance of wear resistance and fracture toughness is required. This combination reduces flank and crater wear under steady cutting conditions and supports longer index intervals, which directly lowers tool-change frequency and increases machine uptime. The result is measurable productivity gains in batch production and serial turning, with fewer interruptions for insert replacement and consistent part-to-part quality. Consistent seating and repeatability with ISO geometry The rhombic CCMT form follows ISO-standard dimensions and ensures compatibility with common turning holders when the form, clearance angle, tolerance class, fastening method, size and thickness are matched. The insert features a 7° clearance angle and a 3.97 mm thickness, which together provide stable seating and predictable cutting behaviour. For workshops that value repeatable tolerances, using ISO-compliant indexable inserts makes tool inventory and holder selection straightforward and reduces set-up variability. Controlled chip formation and reliable surface finish A single-sided chipbreaker combined with a 0.8 mm corner radius delivers a balance between strength at the cutting edge and a refined surface finish on workpieces. The rhombic geometry supports both external profiling and internal boring operations where access is limited, while the cylindrical hole with a one-sided countersink (40°–60°) secures the insert in the pocket to maintain alignment under higher cutting forces. These features help achieve stable chip flow and minimise the risk of edge chipping during light interruptions. Application guidance and practical selection advice Designed for turning, the insert is best matched with chipbreaker and grade selection according to workpiece material, machining stability and cut type. For medium-steel operations with continuous cuts, the CVD-coated carbide grade is a first choice; for heavier interruptions or unstable setups, consider a more robust geometry or a reinforced clamping solution. For precise holder matching and cutting-parameter recommendations, technical specifications and compatibility information are available to support process planning and to safeguard cutting performance. Contact Metav Werkzeuge for detailed application support and order the Tungaloy CCMT09T308 T9215 indexable insert for dependable medium-steel turning performance Technical data Article number: 6777770 Manufacturer SKU: TUN6777770 SKU: 6777770-Tungaloy Item designation: CCMT09T308 T9215 Tungaloy insert Facts Corner radius: 0.8 mm Thickness: 3.97 mm Clearance angle: 7° Insert size: 09 Included angle: 80° ISO code: 09T308 Special features CVD-coated carbide, grade T9215 Rhombic CCMT form Single-sided chipbreaker Cylindrical hole + one-side countersink (40°–60°) ISO-series indexable turning inserts Suitable for medium-steel machining Application: turning Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The CCMT09T308 T9215 insert is specified primarily for medium-steel machining, where the CVD-coated carbide grade combines wear resistance with edge strength. Is the insert compatible with standard CCMT holders? Compatibility requires matching the insert form, 7° clearance angle, thickness and fastening style; the CCMT09T308 conforms to ISO dimensions for CCMT-type holders. How does the 0.8 mm corner radius affect part finish? A 0.8 mm corner radius provides a compromise between edge robustness and surface finish, improving edge strength while enabling good finishing on turned surfaces. Can it be used for internal turning as well as external? Yes, the rhombic shape and single-sided chipbreaker make the insert suitable for both external profiling and internal turning operations where access permits. What fastening style does the insert require? The insert features a cylindrical hole with a one-sided countersink (40°–60°) and needs a matching pocket and screw for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, an 80° rhombic geometry and a 0.8 mm corner radius to raise cutting speeds and tool life in medium Stahl turning; order directly via Metav Werkzeuge or consult the technical team for optimum grade selection. CCMT09T308 T9215 — Rhombic CCMT ISO insert, 80° for turning — Tungaloy The CCMT09T308 T9215 is an ISO-indexed, CVD-coated carbide turning insert designed for productive medium Stahl machining, delivering a balance of wear resistance and breakage toughness in continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Rhombic CCMT insert, 80° cutting geometry 0.8 mm corner radius for robust edge Suitable for continuous and light interrupted turning High productivity and consistent wear resistance The combination of CVD-coated carbide and the T9215 grade yields a tool body that resists abrasive wear while maintaining edge strength under elevated cutting loads. This results in longer tool life and fewer index changes, directly improving spindle uptime and reducing non-productive time. The grade is formulated as a first choice for medium Stahl applications, so machining parameters can be pushed toward higher feed and speed windows compared with uncoated or lower-grade inserts. The overall effect is a clear productivity advantage in high-volume turning operations while preserving surface finish quality. Secure seating and stability for repeatable component quality The 80° geometry of the rhombic CCMT form provides a stable cutting edge orientation suited to a wide range of turning tasks, while the 0.8 mm radius strengthens the cutting corner against chipping. A 7° rake angle and a plate thickness of 3.97 mm contribute to rigidity and heat dispersion during heavy cuts. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure reliable clamping and repeatable positioning in compatible ISO tool holders. These mechanical features together promote predictable chip formation and dimensional stability across batches, reducing rework and inspection overhead. Application guidance and selection for reliable process results For best results, match the one-sided chipbreaker and the T9215 grade to the workpiece condition and cutting strategy: choose the breaker geometry for stable chip control under continuous cuts and select the same grade for light interruptions where fracture resistance is needed. Compatibility with the holder depends on form, relief angle, tolerance class, clamping method, insert size and thickness; typical system components include an ISO turning holder or boring bar, support shim/clip and suitable fastening screws. Tungaloy’s manufacturing quality supports consistent performance, making this insert a practical option when process reproducibility and throughput are priorities. Contact Metav Werkzeuge to define the optimal Tungaloy T9215 insert configuration for your turning applications and to arrange precise supply from stock; Metav Werkzeuge’s advisers can recommend feeds, speeds and holder compatibility for immediate implementation. Technical Data Article number: 6772428 Manufacturer SKU: TUN6772428 SKU: 6772428-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Core data Corner radius: 0.8 mm Cutting angle: 80° Rake angle: 7° Thickness: 3.97 mm Size: 09 Hole style: cylindrical hole with single-sided countersink (40°–60°) Special features CVD-coated carbide, grade T9215 Rhombic plate form CCMT (ISO) One-sided chipbreaker Intended application: turning (Drehen) Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness FAQ Which materials is this insert suited for? This insert is specified for medium Stahl machining; the T9215 grade combines wear resistance and toughness suited to general medium-carbon and alloyed Stahl turning tasks. What are the key geometry and mounting details? The insert uses an 80° rhombic CCMT geometry, a 0.8 mm corner radius, 3.97 mm thickness and a cylindrical hole with single-sided countersink (40°–60°) for secure clamping in ISO-compatible holders. What cutting conditions are recommended? The T9215 grade is optimised for continuous and light interrupted cuts, enabling higher productivity while maintaining surface integrity and tool life. What coating and grade does the insert have? The item features a CVD-coated carbide substrate in grade T9215, offering a balance of abrasive wear resistance and fracture toughness for stable production. How to ensure holder compatibility before ordering? Check holder form, relief angle, tolerance class, clamping method, insert size and thickness; for the CCMT09T308 T9215 (SKU 6772428-Tungaloy), Metav Werkzeuge can confirm fitment with the chosen ISO turning holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated carbide cutting edge with a 0.8 mm corner radius yields durable, high-productivity turning with reliable chip control for medium steels; the ISO CCMT format ensures compatibility with standard holders. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. CCMT09T308 T9215 – CCMT indexable turning insert, CVD-coated carbide, 0.8 mm radius (Tungaloy) A CCMT09T308 T9215 indexable turning insert for external and internal turning, optimised for medium steel machining and compatible with ISO toolholders. CVD-coated carbide for high wear resistance Optimised for medium steel machining Rhombic CCMT shape with 0.8 mm radius Cylindrical hole with 40°–60° countersink Delivering consistent productivity through wear-resistant coating The combination of a CVD coating on a carbide substrate provides a balance of wear resistance and fracture toughness that supports sustained cutting performance in continuous and lightly interrupted cuts. This translates into longer tool life and fewer index changes, which reduces downtime and contributes to more predictable production schedules. The coating chemistry is selected to maintain edge integrity at elevated temperatures typical of medium steel turning, helping to preserve surface finish and dimensional stability. Straightforward compatibility and secure clamping for reliable operation Built to the ISO CCMT format, the insert is designed for compatibility with standard ISO external holders and boring bars. The rhombic geometry combined with a cylindrical hole and a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating, reducing the risk of movement under load. Clearances such as the 7° relief angle and the specified tolerance classes determine fit; matching holders by form, thickness and fastening method guarantees a safe, stable assembly and consistent cutting behaviour. Practical explanation of geometry and cutting behaviour A 0.8 mm corner radius provides a compromise between edge robustness and the ability to maintain smaller radii for fine profiles. The rhombic CCMT form gives versatile approach angles for both external turning and light boring operations, while the one-sided chipbreaker supports controlled chip formation when machining medium steel. For users with limited metallurgical background: chipbreakers mechanically shape the chip to prevent long, entangling swarf and to optimise heat evacuation from the cutting edge, improving safety and surface quality. Application guidance to maximise process efficiency Select the T9215 grade when machining general medium steels where a balance of wear resistance and toughness is required; the grade is suited to continuous to slightly interrupted cuts. Combining this insert with appropriate speeds, feeds and coolant strategies yields improved tool life and surface integrity. For process planners, the predictable wear pattern of this CVD-coated grade simplifies tool-change intervals and inventory planning, supporting higher throughput and lower unit costs in series production. For high wear resistance and reliable chip control, specify the Tungaloy CCMT09T308 T9215 indexable insert and contact Metav Werkzeuge for stock information and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774056 Manufacturer SKU: TUN6774056 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall SKU: 6774056-Tungaloy Facts Corner radius: 0.8 mm Insert size: 09 Relief angle: 7° Plate thickness: 3.97 mm Cutting angle: 80° Special features CVD-coated carbide grade T9215 Rhombic CCMT plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-format turning indexable insert Application: turning, external and internal Compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The Tungaloy CCMT09T308 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade offers a good balance of wear resistance and toughness for continuous to lightly interrupted cuts. How is the insert clamped in a holder? Clamping requires a matching ISO CCMT holder that accommodates the rhombic form, plate thickness (3.97 mm) and the cylindrical hole with countersink; the specified countersink angle (40°–60°) supports secure, repeatable seating. What does the T9215 designation mean for performance? T9215 is a CVD-coated carbide grade selected to combine high wear resistance with good fracture tolerance, making it a first choice for productive machining of medium steels while maintaining edge stability. Can this insert be used for interrupted cuts? Yes; the grade and geometry handle continuous to slightly interrupted cuts. For heavily interrupted operations, a different geometry or a more shock-resistant grade should be considered. Which holders are compatible with this insert? Any ISO-compatible CCMT external holder or boring bar that matches the plate form, size 09, thickness 3.97 mm and relief angle will be compatible; correct matching of tolerance class and clamping method is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide durability and ISO‑standard geometry to maintain steady productivity in medium‑steel turning operations; compatibility with ISO holders and clear dimensions ensure simple tool selection and reliable clamping. Order the insert via Metav Werkzeuge or consult the Metav team for specification advice. CCMT 09T308 T9215 turning insert (ISO CCMT) by Tungaloy — CVD‑coated carbide, 0.8 mm nose radius A CCMT09T308 T9215 indexable turning insert designed for external and internal turning, optimised for medium‑grade steel machining and continuous to light interrupted cuts ISO‑standard CCMT rhombic form CVD-coated T9215 grade for medium steel 0.8 mm nose radius for versatile turning Cylindrical hole with 40°–60° countersink Productivity and wear resistance for medium‑steel turning The CCMT geometry combined with the T9215 CVD‑coated carbide grade delivers a measured balance between wear resistance and fracture toughness, suited to sustained production cycles. The coated substrate helps maintain edge integrity under heat and abrasion while the moderate toughness of the grade reduces the risk of chipping during light interruptions. As a result, machining runs benefit from longer effective tool life and consistent surface finish, supporting steady output with fewer insert changes. Precise geometry for dependable clamping and interchangeability The rhombic CCMT form and clear dimensional data — including the 0.8 mm nose radius, 7° relief angle and 3.97 mm plate thickness — enable predictable mating with ISO‑compatible holders. Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; these parameters make the insert straightforward to replace and align in production fixtures. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) ensures secure fastening and repeatable seating in the toolholder. Application guidance and system considerations for efficient use Intended primarily for medium steel applications, the insert is suitable for continuous to light interrupted cuts and is typically used with an external holder or boring bar, plus a shim/clamp set and replacement screws as part of the system build. The single‑sided chipbreaker assists in chip control for common turning feeds, while selecting the correct chipbreaker and grade ensures stable cutting and improved surface integrity. For mixed or harder materials, matching a different chipbreaker or grade is advised to retain performance. For reliable medium‑steel turning choose the Tungaloy CCMT 09T308 T9215 insert — contact Metav Werkzeuge for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772435 Manufacturer SKU: TUN6772435 Model series: ISO‑Drehwendeschneidplatten Designation: CCMT09T308 T9215 Tungaloy‑Wendeplatte Numeric data Nose radius: 0.8 mm Inscribed circle / size: 09 Lead/approach angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Design and special features Shape: rhombic CCMT Grade: T9215 (CVD‑coated carbide) Chipbreaker: single‑sided Hole: cylindrical hole + single‑sided countersink (40°–60°) Application: external and internal turning; medium steel; continuous to light interrupted cuts Compatibility: ISO holders — determined by form, relief angle, tolerance class, clamping, size and thickness Typical system: insert, matching external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The CCMT09T308 T9215 insert is optimised for medium‑grade steel machining; the T9215 CVD‑coated carbide offers wear resistance and toughness suited to continuous and light interrupted cuts. How does the T9215 coating affect tool life? The T9215 CVD coating enhances abrasion resistance and thermal stability, improving edge life and maintaining consistent cutting performance under typical turning conditions. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO CCMT geometry; compatibility with an ISO holder depends on form, 7° relief angle, tolerance class, clamping method, size and plate thickness (3.97 mm). What chip control can be expected with this insert? The single‑sided chipbreaker provides reliable chip formation for common turning feeds in medium steel, aiding evacuation and reducing risk of entanglement. Which SKU or article number should be referenced when ordering? Reference Article number 6772435 or Manufacturer SKU TUN6772435 when specifying this Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, an 0.8 mm corner radius and ISO compatibility for efficient, repeatable turning operations; order the insert directly via Metav Werkzeuge or request cutting data from their consultants. CCMT09T308 T9215 CCMT 09T308 Tungaloy turning insert for Turning, CVD-coated, 0.8 mm radius A CCMT09T308 T9215 turning insert designed for medium steel machining, combining high wear resistance with fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide for wear resistance 0.8 mm corner radius for robust profiles Rhombic 09 form for versatile clamping Single-sided chipbreaker for medium steel High productivity from the grade and coating The CVD-coated carbide grade T9215 offers a balance of wear resistance and breakage security, making it a dependable choice for medium steel turning. The coating reduces flank and crater wear under typical cutting conditions, which extends life and supports stable cutting parameters. This results in fewer indexings and less downtime per workpiece, improving overall shop throughput while maintaining dimensional accuracy. Geometry engineered for stable performance A rhombic insert with an 80° approach angle and 7° relief ensures stable load distribution at the cutting edge; the 0.8 mm corner radius produces a robust cutting profile that resists edge chipping in routine external and internal turning. The with-hole design and one-sided countersink (40°–60°) guarantee secure clamping in compatible holders, while standard ISO form and tolerance classes enable straightforward replacement in approved toolholders and boring bars. Practical system setup and machining advice The insert forms part of an ISO system: indexable insert, matched external holder or boring bar, underplate/clamp set and replacement screws. The single-sided chipbreaker is tuned for continuous to slightly interrupted cuts typical in production turning of steel, supporting consistent chip formation and evacuation. Selecting a matching chipbreaker and the correct stability of the assembly reduces vibration, improves surface finish and prolongs tool life, so machining cycles remain predictable and efficient. Contact Metav Werkzeuge for cutting data and to order the Tungaloy CCMT09T308 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772422 Manufacturer SKU: TUN6772422 SKU: 6772422-Tungaloy Series: ISO turning inserts Dimensions & angles Size designation: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Approach angle: 80° Design & features Material: cemented carbide Grade: T9215 Coating: CVD Shape: rhombic Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning Typical use: medium steel machining FAQ What materials is this insert best suited for? The CCMT09T308 T9215 insert (Tungaloy indexable turning insert, SKU 6772422-Tungaloy) is optimised for medium steel machining and delivers a balance of wear resistance and toughness. Is the insert compatible with standard ISO toolholders? Compatibility is determined by form, relief angle, tolerance class, attachment and thickness; the CCMT09T308 adheres to ISO insert dimensions for straightforward replacement in matching holders. What benefits does the T9215 grade provide? T9215 is a CVD-coated carbide grade offering high wear resistance with enhanced fracture safety, supporting higher productivity in continuous to lightly interrupted turning operations. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and correct seating in compatible external holders or boring bars for consistent cutting geometry. Which chipbreaker is fitted and what is its purpose? The insert features a single-sided chipbreaker designed to control chip formation during turning of medium steels, improving evacuation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD-coated carbide T9215 for high wear resistance and the ISO CCMT09T308 form for wide holder compatibility to keep turning operations productive and consistent; order the inserts directly via Metav Werkzeuge or consult the technical team for selection advice. CCMT 09T308 T9215 ISO indexable turning insert — Tungaloy, 80° rhombic geometry, CVD-coated carbide CCMT 09T308 T9215 is an ISO‑format indexable insert designed for general turning applications, combining a robust CVD coating with a rhombic 80° geometry for reliable medium‑steel machining ISO CCMT format for standard toolholders CVD-coated carbide T9215 for wear resistance 80° rhombic geometry for versatile turning Single-sided chipbreaker with cylindrical hole Improved productivity for medium‑steel turning The CVD‑coated carbide grade T9215 is engineered as a first choice for medium‑steel machining, providing a balance of wear resistance and fracture toughness that supports higher material removal rates. In continuous to lightly interrupted cuts this coating and substrate combination reduces flank wear and extends tool life, leading to longer uninterrupted production runs and fewer index changes. The result is a measurable uplift in throughput with consistent surface quality. Secure clamping and broad holder compatibility The ISO CCMT09T308 form with an included angle of 80° and a clearance angle of 7° offers broad compatibility with common external holders and boring bars. The insert thickness of 3.97 mm and the rhombic outline ensure stable seating and clamping; the cylindrical hole with one‑sided countersink (40°–60°) supports standard fastening systems and repeatable assembly. These geometrical features simplify tool changeovers and reduce set‑up variability in batch production. Controlled chips and consistent surface finish A single‑sided chipbreaker tailored to the grade promotes predictable chip formation during turning, which helps maintain cutting stability and reduces the risk of tool damage on light interruptions. The combination of geometry and coating supports improved surface finish in finishing passes while allowing secure performance in semi‑roughing when machine and clamping rigidity are sufficient. The insert forms part of a system comprising the indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws for full process control. Contact Metav Werkzeuge to confirm suitability for specific turning tasks or to request availability of the Tungaloy CCMT09T308 T9215 inserts; technical advice and order handling are available via Metav Werkzeuge. Technical data Article number: 6772440 SKU: 6772440-Tungaloy Manufacturer SKU: TUN6772440 Material: Cemented carbide Series: ISO turning inserts Type designation: CCMT09T308 Facts Corner radius: 0.8 mm Insert size: 09 Thickness: 3.97 mm Clearance angle: 7° Included angle: 80° Special features Coating: CVD (grade T9215) Chipbreaker: single-sided Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning Recommended for: medium steel machining, continuous to light interrupted cuts FAQ Which materials are best machined with this insert? The Tungaloy CCMT09T308 with T9215 CVD coating is optimised for medium‑grade steels, delivering high wear resistance and good toughness for productive turning operations. Which holder types are compatible with this insert? Compatibility follows the ISO CCMT form; the insert fits standard CCMT external holders and boring bars when form, clearance angle, tolerance class, fastening and thickness match the toolholder specifications. Is the insert suitable for interrupted cuts? The grade and geometry are suited to continuous and light interrupted cutting; heavier interruptions require assessment of holder rigidity and cutting parameters for stable performance. How does the chipbreaker affect surface finish? The single‑sided chipbreaker promotes consistent chip control and cutting stability, supporting improved surface quality in finishing passes while still allowing efficient semi‑roughing when conditions permit. What does the cylindrical hole with countersink mean for clamping? The cylindrical hole plus one‑sided countersink (40°–60°) enables standard clamping with replacement screws and shim/clamp sets, ensuring repeatable seating and secure fastening in typical tool systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and fracture toughness delivered by the CVD-coated carbide grade T9215 combined with a precise 0.8 mm corner radius for consistent surface finish and long cutting life; order these inserts directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T308 T9215 — Tungaloy turning insert (CVD-coated carbide, 0.8 mm radius) CCMT 09T308 T9215 is an ISO rhomboid turning insert designed for medium steel machining, featuring an 80° geometry and a 7° relief angle for robust edge support and repeatable results. CVD-coated carbide grade T9215 0.8 mm corner radius for fine finishes ISO rhomboid 80° geometry Cylindrical hole with single-sided countersink Reliable wear resistance for medium steel productivity The CVD-coated carbide grade T9215 combines wear resistance with enhanced fracture toughness, making it a strong choice for sustained production runs. This combination supports high material removal rates while maintaining edge integrity under continuous to slightly interrupted cuts. The coating improves resistance to abrasion and built-up edge, which in turn extends effective tool life and reduces unscheduled tool changes, translating into measurable shop-floor efficiency gains. Geometry engineered for surface quality and strength The 80° geometry and 0.8 mm corner radius provide a balance between edge strength and surface finish: the larger included angle increases the effective cutting edge engagement, while the corner radius smooths the transition to the workpiece for improved surface appearance. The 7° relief reduces friction behind the cutting edge, helping to prevent rubbing and heat build-up. Together these geometric features support consistent part quality and reduce rework requirements when turning medium-grade steels. Secure clamping and system compatibility Designed as an ISO-compliant insert, compatibility with the toolholder depends on form, relief, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure secure clamping in compatible holders and boring bars. This secure fixation minimises micro-movement under load, supporting repeatable axial and radial positioning for precision turning operations and predictable tool life across batches. Proven productivity and predictable economics Selecting a carbide insert that suits both the workpiece material and cutting conditions reduces cycle times and tooling costs per part. The single-sided chipbreaker and the coating synergy result in controlled chip formation and stable cutting forces, which benefits throughput and machine uptime. For manufacturing environments prioritising repeatability and lower unit cost, these inserts help to shorten machining cycles and limit downtime for tool changes, supporting a more efficient production workflow. For tailored advice on applying Tungaloy CCMT 09T308 T9215 inserts or to secure a supply via Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 — expert guidance and rapid delivery options are available. Technical Data Article number: 6772432 Manufacturer SKU: TUN6772432 SKU: 6772432-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Included angle: 80° Relief (free) angle: 7° Thickness: 3.97 mm Insert size: 09 Special features Material: carbide (Hartmetall) Coating / grade: CVD-coated, T9215 Shape: rhomboid Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning; optimised for medium steel machining FAQ What materials is this insert suitable for? The CCMT 09T308 T9215 turning insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 provides a balance of wear resistance and fracture toughness suitable for continuous to lightly interrupted turning. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius on the CCMT insert increases edge strength and improves surface finish by smoothing the cutting action, which is especially beneficial when consistent part quality is required. Is this insert compatible with standard ISO holders? Compatibility depends on holder form, relief, tolerance class, fastening and size; the insert’s cylindrical hole with single-sided countersink (40°–60°) is designed for secure clamping in compatible ISO toolholders and boring bars. What cutting conditions suit this grade best? The Tungaloy T9215 grade performs well under higher productivity regimes and is recommended for continuous to slightly interrupted cuts in medium steels, where both durability and fracture resistance are required. Which product identifiers should be used when ordering? Order using Article number 6772432 or Manufacturer SKU TUN6772432 to ensure the correct CCMT 09T308 T9215 Tungaloy turning inserts are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade and the ISO CCMT09T308 geometry to achieve consistent performance in medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. CCMT 09T308 T9225 – Turning insert by Tungaloy, ISO CCMT09T308, rhombic CCMT09T308 T9225 is an ISO-conforming turning insert designed for external and internal turning in demanding steel applications, offering robustness for interrupted cuts and variable engagement. ISO rhombic CCMT geometry CVD-coated T9225 grade for steel turning 0.8 mm corner radius for durable edges Cylindrical hole with single-side countersink High-performance turning where consistency matters This rhombic turning insert is built on a carbide substrate with a CVD coating, delivering a balanced combination of wear resistance and toughness suited to medium-to-heavy steel machining. The T9225 grade is a robust universal option when cutting conditions vary or short interruptions occur, allowing longer tool life and less frequent index changes. The ISO specification and standardised geometry ensure predictable cutting action and straightforward integration into common holder systems. Precision fit and system-compatible design for reliable setup Compatibility with the toolholder depends on form, clearance angle 7°, tolerance class, fastening method, size and thickness; the insert is supplied in the ISO CCMT format for straightforward selection. The part features a 0.8 mm corner radius and a plate thickness of 3.97 mm, while the hole design is a cylindrical bore with a one-sided countersink (40°–60°), supporting stable clamping and repeatable seating. For a complete system, combine the insert with a matching outer holder or boring bar, a shim/locking set and replacement screws to secure consistent clamping force. Practical benefits for shop-floor productivity and surface quality The single-sided chipbreaker and the grade choice enable controlled chip formation and reliable evacuation, which contributes to stable machining and improved surface finish on steel components. The robust edge tolerance helps absorb fluctuations in engagement, reducing the risk of premature edge failure during interrupted cuts. Specifying this ISO-format insert streamlines tool inventory and supports predictable productivity gains on both batch and single-piece turning operations. Contact Metav Werkzeuge for tailored advice on toolholders and process parameters for the CCMT09T308 T9225 turning insert; Metav Werkzeuge can advise on matching chipbreakers and supply the required system components — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781452 Manufacturer SKU: TUN6781452 SKU: 6781452-Tungaloy Name: CCMT09T308 T9225 Tungaloy insert Core specifications Geometry: CCMT (rhombic) ISO code: 09T308 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: 3.97 mm Size: 09 Principal angle: 80° Hole: with hole Special features Material: carbide Coating: CVD-coated Grade: T9225 (robust universal for steel) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning Model series: ISO turning inserts FAQ What materials is this insert intended for? The CCMT09T308 in T9225 grade is optimised for machining steel and is particularly suited to medium-to-heavy turning where toughness is required. Can the insert handle interrupted cuts? Yes, the T9225 grade and robust carbide substrate are designed to tolerate variable engagement and short interruptions without rapid edge degradation. What holder characteristics must be matched for proper use? Compatibility is determined by the insert form, clearance angle 7°, tolerance class, fastening method, size and thickness; using a matching ISO CCMT holder and correct clamping hardware ensures correct seating. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert controls chip formation for improved evacuation and consistent surface quality during steel turning. Is the CCMT09T308 suitable for internal and external turning? Yes, the ISO CCMT geometry and hole design allow use in appropriate outer holders and boring bars for both external and internal turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com