CCMT 09T304 T9215 Wendeplatten - Tungaloy
High wear resistance and a fracture‑resistant edge make this insert an efficient choice for medium‑steel turning; combined with ISO compatibility and a rhombic CCMT form, it reduces setup time and increases throughput. Order the insert via Metav Werkzeuge or consult our specialists for holder and clamp compatibility. CCMT09T304 T9215 — CCMT turning insert for medium‑steel turning, CVD‑coated, Tungaloy A CCMT09T304 T9215 is an ISO rhombic turning insert designed for external and internal turning, offering stable chip control and long life in continuous to light interrupted cuts. CVD‑coated carbide for high wear resistance Optimised for medium steel machining Rhombic CCMT form with 0.4 mm radius Single‑sided chipbreaker for stable chips Deliver reliable high productivity in medium‑steel turning The combination of a CVD‑coated carbide substrate and the T9215 grade delivers a balance of wear resistance and fracture toughness, ideal for productive machining of medium‑strength steels. This configuration reduces the frequency of index changes and maintains cutting performance across longer production runs, which supports higher machine utilisation and predictable process windows. The grade’s suitability for continuous to light interrupted cuts means fewer unexpected tool failures and more consistent cycle times for batch and serial production. Secure chip control and repeatable surface quality The single‑sided chipbreaker paired with the rhombic CCMT geometry provides stable chip formation and evacuation, reducing the risk of chip entanglement and workpiece damage. A 0.4 mm corner radius enhances edge strength for general turning, while the 7° clearance angle helps to prevent rubbing and thermal build‑up. Together these attributes enable reliable surface finish and reduced vibration during cuts, which translates into fewer rework steps and more consistent part quality. Fast, predictable integration with ISO systems The insert follows ISO standards for shape and size, which simplifies selection and integration into existing toolholders: compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness. The ISO rhombic specification and a 3.97 mm thickness make it straightforward to match with CCMT‑compatible holders and mounting sets, shortening setup times and reducing the need for trial fits. Clear understanding of holder and clamp specifications ensures secure seating and repeatable cutting geometry every time. Durable choice for stable production economics With its combination of robust substrate and modern coating, this grade offers extended edge life under typical production conditions, supporting cost‑effective machining. Predictable wear behaviour and resistance to chipping lower the total cost per part and reduce unplanned downtimes. When paired with correctly specified holders and clamping hardware, the insert contributes to a stable and efficient turning process that supports consistent output and long‑term process reliability. For tailored advice on integrating Tungaloy’s T9215 inserts into production, contact Metav Werkzeuge quoting SKU TUN6777810 for precise holder compatibility and stock information. Technical data Article number: 6777810 Manufacturer SKU: TUN6777810 Merchant SKU: 6777810‑Tungaloy Series: ISO turning inserts Facts Grade: T9215 Carbide substrate, CVD coating Insert designation: CCMT09T304 Insert size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Hole: cylindrical hole + single‑side countersink 40°–60° Special features Rhombic CCMT form Single‑sided chipbreaker For external and internal turning Suitable for continuous to light interrupted cuts Optimised for medium steel machining FAQ Which materials is this insert best suited for? The CCMT09T304 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for reliable performance on typical structural and engineering steels. Can this insert handle interrupted cuts? Yes, the grade is intended for continuous to light interrupted cuts, offering fracture resistance that helps maintain edge integrity under occasional interruptions. How is compatibility with a holder ensured? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters to the holder ensures secure seating and correct cutting geometry for the CCMT09T304 insert. What effect does the 0.4 mm corner radius have? A 0.4 mm corner radius increases edge strength and contributes to stable cutting and improved surface finish for general turning tasks, balancing robustness and finish. What chip control does the insert provide? The single‑sided chipbreaker is designed for stable chip formation and evacuation, reducing the chance of chip nests and improving process reliability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for high wear resistance and the rhombic 80° geometry with a 7° clearance to maintain stable cutting under continuous to lightly interrupted conditions; order the CCMT09T304 T9215 insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T304 T9215 indexable insert for turning — Tungaloy CCMT 09T304 T9215 is an ISO-format indexable insert designed for external and internal turning in medium steels, combining a CVD coating with a chipformer tuned for productivity CVD-coated carbide for high wear resistance Optimised one-sided chipbreaker for medium steel Rhombic 80° geometry with 7° clearance Central hole with cylindrical seat and countersink High productivity through wear-resistant grade and coating The combination of a CVD-coated surface and a carbide substrate delivers a dependable balance of wear resistance and fracture toughness suitable for continuous to lightly interrupted cuts. The T9215 grade is identified as the first choice for medium steel machining, enabling longer tool life and more predictable change intervals. Using this indexable cutting solution reduces unplanned stoppages and supports higher output rates, which is particularly valuable in production environments where consistent cycle times are required. Stable cutting behaviour and precise locating for repeatable results The rhombic geometry with an 80° included angle and a 7° clearance provides a robust cutting edge that favours stable tool engagement and surface finish. The insert's one-sided chipbreaker promotes controlled chip formation when paired with suitable cutting parameters, improving evacuation and reducing the risk of re-cutting. Secure seating is ensured by the central cylindrical hole and single-sided countersink (40°–60°), which together guarantee precise location and reliable clamping in compatible holders, helping to maintain repeatable component tolerances. Practical dimensions and ISO compatibility for straightforward tool planning With a 0.4 mm corner radius and a plate thickness of 3.97 mm, this rhombic insert in size 09 supports a range of turning tasks from finishing to light roughing when matched to machine rigidity and workpiece clamping. As part of the ISO indexable turning inserts series, compatibility with holders depends on matching the insert form, clearance, tolerance class, fixation, size and thickness — a standardised approach that simplifies procurement and tool inventory. The design supports both external and internal turning operations and permits selection of the appropriate chipformer and grade to suit material and process stability. For tailored recommendations on using the Tungaloy CCMT 09T304 T9215 insert (SKU TUN6772420) in medium-steel turning operations, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for availability and application support Technical data Article number: 6772420 Manufacturer SKU: TUN6772420 Stock SKU: 6772420-Tungaloy Name: CCMT09T304 T9215 Tungaloy insert Brand: Tungaloy Facts Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Size designation: 09 Countersink angle: 40°–60° Special features CVD-coated carbide (T9215) One-sided chipbreaker Rhombic plate form (CCMT) ISO indexable turning inserts series Central cylindrical hole with single-sided countersink Suitable for external and internal turning FAQ Which materials is this insert best suited for? The CCMT09T304 T9215 Tungaloy insert is optimised for medium steel machining; the T9215 CVD-coated carbide grade provides the wear resistance and toughness required for high-productivity turning. What does the chipbreaker do on this insert? The one-sided chipbreaker on the CCMT09T304 T9215 insert shapes chips for improved evacuation and reduced re-cutting, supporting consistent surface finish under continuous to lightly interrupted cuts. How is the insert secured in the holder? The insert locates via a central cylindrical hole with a single-sided countersink (40°–60°) that ensures stable clamping when the holder matches the ISO form, tolerance class and thickness of the insert. What are the key dimensions to verify for holder compatibility? Verify the insert size (09), thickness 3.97 mm, corner radius 0.4 mm, 7° clearance and the CCMT rhombic form; matching these parameters ensures correct fit and performance for the CCMT09T304 T9215 insert. Can this insert be used for interrupted cuts? Yes, the T9215 grade and the insert geometry are suitable for continuous to lightly interrupted cuts; for heavy interruptions, tool selection should consider more robust edge preparations and machine/workpiece stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, fracture toughness and ISO compatibility to keep turning operations productive and reliable; order the insert directly via Metav Werkzeuge or consult our specialists for fitment advice. CCMT 09T304 T9215 ISO turning insert for medium steel — Tungaloy The CCMT09T304 T9215 is an ISO rhombic turning insert designed for external and internal turning, offering a robust balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 for medium steel Rhombic ISO CCMT geometry for versatile turning 0.4 mm corner radius for balanced edge strength Cylindrical hole with single-sided countersink 40°–60° Delivering high productivity through a durable cutting grade The combination of a CVD-coated carbide substrate and the T9215 grade provides a reliable mix of wear resistance and fracture toughness, making the insert well suited to sustained production runs. This balance reduces unexpected tool changes and supports a consistent surface finish when machining medium steel. The material choice is focused on maintaining a stable cutting edge under continuous to slightly interrupted conditions, which translates directly into higher component throughput and lower tool-related downtime. Compatibility and correct clamping ensure predictable results Compatibility with a toolholder is determined by insert form, relief angle, tolerance class, fastening, size and thickness; the insert’s 7° relief angle and rhombic CCMT geometry require a matching holder and shim/clamp set to achieve the specified cutting geometry. Correct selection of holder and tightening torque prevents runout and ensures repeatable positioning, while the insert’s cylindrical hole with a single-sided countersink (40°–60°) secures positive clamping. For system assembly: use a matching outer holder or boring bar, the appropriate base shim/clamp and replacement screws. Practical machining benefits and chip control The single-sided chipbreaker design combined with a 0.4 mm corner radius gives a balanced compromise between edge strength and sharpness, supporting reliable chip formation and improved surface quality on turned parts. In practice, this geometry is particularly useful for medium-strength steels where moderate feeds and cutting depths are used; the insert’s features help avoid continuous long chips and aid evacuation when using standard chip control strategies. Expect consistent edge behaviour across batch runs, which simplifies process planning and quality control. System-level advantages and economical use of tooling As part of an ISO insert system, the item fits into a modular approach: the ISO CCMT insert can be stocked and paired with a selection of holders to cover a wide range of turning operations, reducing tooling variety and inventory costs. The 3.97 mm thickness, standard 09 size and the robust carbide construction contribute to a good lifetime under appropriate conditions, supporting predictable tool-change intervals and efficient production scheduling. Traceable identifiers like the manufacturer SKU reinforce procurement and reordering accuracy. Contact Metav Werkzeuge for tailored advice on mounting options and to secure the Tungaloy CCMT 09T304 T9215 insert for your turning application via phone or email Technical specifications Manufacturer article number: 6777769 SKU: 6777769-Tungaloy Manufacturer SKU: TUN6777769 Model series: ISO turning inserts Manufacturer: Tungaloy Core data Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Thickness: 3.97 mm Size: 09 Hole: with hole Materials & features Material: carbide Grade/coating: T9215 (CVD-coated) Chipbreaker: single-sided Plate shape: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: external and internal turning; continuous to lightly interrupted cuts FAQ What workpieces is this insert designed for? The CCMT09T304 T9215 insert is primarily intended for medium steel turning, where its CVD-coated carbide grade combines wear resistance with fracture toughness for productive cutting. How does the T9215 grade affect performance? The T9215 grade offers increased wear resistance while retaining sufficient toughness to resist chipping, which supports higher productivity in continuous to lightly interrupted turning operations. Which holder features are required for correct fitment? Compatibility depends on insert form, 7° relief angle, tolerance class, fastening method, size and thickness; a matching CCMT-compatible outer holder or boring bar, correct shim/clamp and screws are required for secure clamping. What does the 0.4 mm corner radius mean in practice? A 0.4 mm corner radius balances edge strength and sharpness, providing improved surface finish potential while offering better resistance to edge damage compared with very small radii. Can this insert handle interrupted cuts? The insert is suitable for continuous to lightly interrupted cuts; heavy interruption may demand a different grade or geometry optimised for shock resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide grade T9215, ISO‑standard rhombic geometry and a 0.4 mm corner radius for reliable medium‑steel turning performance; order directly via Metav Werkzeuge or consult our technical team if further application advice is required. CCMT 09T304 T9215 Tungaloy turning insert — ISO rhombic insert for medium steel turning, CVD‑coated carbide The CCMT09T304 T9215 is an ISO‑standard rhombic turning insert engineered for external and internal turning of medium‑grade steel, offering high wear resistance and reliable fracture toughness in continuous to light interrupted cuts. CVD‑coated carbide grade T9215 ISO rhombic insert CCMT 09T304 0.4 mm corner radius for stable cutting Cylindrical hole with 40°–60° countersink Higher productivity with wear‑resistant CVD‑coated carbide The rhombic insert delivers measurable productivity improvements when machining medium steels thanks to its CVD‑coated carbide composition and the T9215 grade formulation, which balance wear resistance and toughness. The combination of a 0.4 mm corner radius and robust substrate minimises edge chipping and supports a consistent surface finish, enabling longer tool life and fewer indexings. For production environments seeking stable cycle times, these characteristics translate into lower tooling cost per part and more predictable process behaviour. Simple fit‑up in ISO tool systems for fast changeovers Designed to the ISO plate family, the geometry and dimensions ensure compatibility with matching holders when the form, 7° clearance angle, tolerance class, fastening, size and thickness align. The rhombic 80° form gives flexibility for a range of turning contours while the cylindrical hole with single‑side countersink (40°–60°) secures accurate seating and repeatable clamping. Integration into an existing toolpack is straightforward: select the appropriate holder, shim and clamp set, keeping maintenance time and setup errors to a minimum. Controlled chips and stable cutting under varied conditions The insert features a one‑sided chipbreaker tailored for continuous to light interrupted cuts, promoting predictable chip formation and efficient evacuation. The plate thickness of 3.97 mm and the rhombic form increase rigidity at the cutting edge, reducing vibration and improving surface integrity. Together, the geometry and chip control reduce rework and promote safer swarf handling, which is especially valuable in high‑throughput shops where both operator safety and component quality matter. Practical guidance for process selection For external and internal turning operations on medium‑strength steels, choose a matching chipbreaker and the T9215 grade to maximise tool life without sacrificing productivity. Where cuts are slightly interrupted, maintain moderate feed and cutting speed to exploit the insert’s fracture resistance. If uncertainty remains about holder compatibility or cutting parameters, Metav Werkzeuge provides application support to align insert selection with machine rigidity, holder design and workpiece material. For dependable medium‑steel machining with Tungaloy quality, request guidance or place an order through Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised application advice and availability. Technical Data Article number: 6772439 Manufacturer SKU: TUN6772439 SKU: 6772439-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Plate thickness: 3.97 mm Size: 09 Special features CVD‑coated carbide (T9215) Rhombic plate form (CCMT) One‑sided chipbreaker Cylindrical hole + single‑side countersink (40°–60°) Intended application: Turning (external and internal) Suitable for continuous to light interrupted cuts System components: insert, matching holder, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The CCMT09T304 T9215 insert is optimised for medium‑grade steel machining; the T9215 grade delivers a balance of wear resistance and toughness suited to continuous and light interrupted turning. How does the insert fasten to holders? Clamping relies on the cylindrical hole with a one‑side countersink (40°–60°); correct seating is ensured when holder form, tolerance class, fastening and plate thickness correspond to the ISO specification. Which properties reduce the risk of edge chipping? The combination of a CVD‑coated carbide substrate, robust geometry and a 0.4 mm corner radius limits chipping and supports stable cutting, particularly under steady‑state conditions. Can this insert be used for internal turning as well as external? Yes — the rhombic CCMT 09T304 geometry and the 7° clearance angle make it suitable for both external and internal turning operations when paired with the appropriate holder. What benefits does the T9215 grade provide in production settings? The T9215 grade offers high wear resistance with good fracture toughness, enabling longer tool life and consistent results that support higher productivity and reduced downtime. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high productivity, robust wear resistance and precise geometry for consistent medium‑steel turning results; order original Tungaloy inserts via Metav Werkzeuge or consult the technical team for application guidance. CCMT 09T304 T9215 ISO turning insert by Tungaloy — for medium‑steel turning The CCMT09T304 T9215 ISO turning insert is an indexable turning solution designed for external and internal turning in medium‑steel applications. CVD-coated carbide grade T9215 0.4 mm corner radius for precise profiles 7° clearance angle for stable cutting Rhombic CCMT shape with fixing hole Increased productivity through a wear‑resistant grade The CVD‑coated carbide grade T9215 delivers a balanced combination of wear resistance and fracture resistance, making it well suited to demanding, continuous or slightly interrupted turning operations on medium steels. Selecting this grade helps to sustain cutting performance over longer tool life, which in turn reduces tool change frequency and improves overall throughput. The chemical vapour deposition layer provides a hard, heat‑resistant finish that supports higher cutting speeds and consistent dimensional results. Geometry engineered for dimensional accuracy and surface quality The rhombic CCMT geometry with an included angle of 80° and a 0.4 mm corner radius provides controlled contact at the cutting edge for accurate form turning and profile work. A 7° clearance angle reduces rubbing behind the cutting edge, improving stability and lowering cutting forces; this supports predictable tool behaviour and better surface finish even under varying feed conditions. These geometric features are particularly valuable where repeatability and tight tolerances are required. Secure clamping and quick integration into machining systems As an ISO‑standard insert, this component integrates into common external holders or boring bars and is fastened using the centre hole configuration. The centre hole with a cylindrical hole plus single‑sided countersink (40°–60°) ensures reliable seat and repeatable positioning on the clamping set. System recommendations include a compatible outer holder or boring bar, a backing shim or clamp set, and replacement screws; this setup reduces downtime when exchanging inserts and supports consistent assembly alignment on the toolpost. Practical application advice and selection criteria Designed for turning, the insert performs best when matched with an appropriate chipbreaker and cutting parameters that reflect material condition and machine stability. For external and internal turning of medium steels, choose feeds and speeds that exploit the T9215 grade’s capabilities: higher cutting speeds for productivity while maintaining chip control for safety and surface quality. Where interrupted cuts or unstable setups occur, adjust depth of cut and reduce cutting speed to preserve edge integrity. For tailored application advice and to request original Tungaloy indexable inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks. Technical data Article number: 6772421 Manufacturer SKU: TUN6772421 SKU: 6772421-Tungaloy Data Size designation: 09 Insert thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Rhombic plate form (CCMT) Centre hole with cylindrical hole + single‑sided countersink (40°–60°) CVD‑coated cemented carbide (grade T9215) Application: turning (external and internal) Recommended for continuous to slightly interrupted cuts FAQ Which materials is this insert best suited for? The Tungaloy CCMT09T304 T9215 insert is optimised for medium‑steel machining; the T9215 grade combines wear and fracture resistance for productive turning in this material class. Can this insert be used for internal turning? Yes. The ISO‑standard geometry and the rhombic form allow use in both external and internal turning holders when the correct holder and clamping components are chosen. What does the 0.4 mm radius affect in machining? A 0.4 mm corner radius smooths the transition at the cutting edge, improving surface finish and distributing cutting forces to lower the risk of edge chipping during profile and finishing passes. How is the insert fixed in the toolholder? Fixing is via the centre hole: the plate uses a cylindrical hole with a single‑sided countersink (40°–60°) to ensure a stable seat and repeatable orientation when mounted in an ISO‑compatible holder. Which chipbreaker should be selected for this grade? Select a chipbreaker matched to workpiece material, feed rate and depth of cut; for medium steels and continuous cuts, a moderate‑duty chipbreaker that promotes short, controllable chips is recommended for this grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, a 0.4 mm corner radius and ISO compatibility to boost productivity and tool life in medium-steel turning; order the (CCMT09T304 T9215 Tungaloy indexable insert) directly via (Metav Werkzeuge) or ask our consultants if needed. CCMT 09T304 T9215 Tungaloy indexable insert for turning — rhombic, 0.4 mm corner radius A CCMT 09T304 T9215 Tungaloy indexable insert designed for general-purpose external and internal turning in medium steels, combining a robust CVD-coated carbide grade with a single-sided chipbreaker and ISO conformity for straightforward holder compatibility. CVD-coated carbide grade T9215 Designed for medium steel and high productivity Rhombic CCMT shape, 0.4 mm corner radius Increased productivity for medium-steel turning The combination of a CVD coating and a wear-resistant carbide substrate delivers consistent cutting performance in continuous and light interrupted operations. The chosen grade, T9215, balances wear resistance with fracture toughness to allow for higher cutting speeds and longer tool life under stable conditions. For shops focused on cycle-time reduction, the insert’s geometry supports efficient chip control while preserving surface finish, making it suitable for both roughing and finishing passes where process reliability matters. Proven geometry and simple holder compatibility The rhombic indexable insert format follows ISO plate dimensions and locating features, so compatibility with standard external holders and boring bars is determined by form, relief angle and thickness. The 7° relief angle and the 80° approach combine to provide predictable cutting forces and reduced vibration in many turning set-ups. The plate’s cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping; this mechanical stability contributes directly to repeatable results and predictable tool-change intervals in production environments. Practical selection guidance and machining benefits A 0.4 mm corner radius offers a compromise between strength and profile definition: it improves edge durability compared with sharper radii while maintaining acceptable surface quality. The single-sided chipbreaker is optimised for the mid-range steels indicated by the grade and supports reliable chip formation across varying feeds. For less experienced planners, indexable insert terminology denotes a replaceable cutting edge—an economical choice that reduces toolholder inventory and simplifies reconditioning compared with solid carbide tooling. Contact Metav Werkzeuge to confirm holder compatibility and select the optimal Tungaloy grade and geometry for the intended turning application. Technical Data Article number: 6772431 Manufacturer SKU: TUN6772431 Model series: ISO-Drehwendeschneidplatten Material: Carbide Core Dimensions ISO designation: 09T304 Size: 09 Plate thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Approach angle: 80° Design & Features Shape: Rhombic (CCMT) Coating / Grade: T9215 (CVD-coated) Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: Turning (external and internal) FAQ What materials is this insert intended for? The CCMT09T304 T9215 Tungaloy indexable insert is optimised for medium steels; the T9215 grade provides wear resistance and toughness suited to continuous and light interrupted turning. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation for stable cuts and improved surface finish during turning operations. Is the insert compatible with standard ISO holders? The CCMT format follows ISO plate conventions; compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness, and the insert is designed to work with standard CCMT-compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Robust T9225 CVD-coated carbide and the ISO rhombic CCMT geometry combine to deliver reliable mid-to-heavy duty turning performance with stable chip control; ideal for steels under variable cutting conditions. Order the insert directly via Metav Werkzeuge or request specialist advice from our consultants. CCMT09T304 T9225 Tungaloy turning insert — ISO rhombic insert for turning CCMT09T304 T9225 is an ISO rhombic turning insert engineered for mid-to-heavy steel turning, offering a balance of toughness and wear resistance for interrupted cuts and changing engagement conditions ISO rhombic CCMT geometry CVD-coated T9225 carbide grade 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent performance for steel turning The combination of a CVD-coated substrate and the T9225 carbide grade provides a reliable compromise between wear resistance and toughness for mid-to-heavy steel operations. The coating improves thermal resistance and reduces flank wear, while the base carbide maintains edge stability when cuts are intermittently loaded. This balance reduces the frequency of indexings and keeps machining tolerances consistent, resulting in fewer production interruptions and more predictable cycle times. For workshops seeking repeatable surface quality, the insert’s geometry helps maintain a steady cutting edge and consistent chip control across a range of feeds and depths. Secure seating and ISO compatibility for quick tool changes Designed to ISO specifications, the rhombic form and tolerance classes ensure straightforward compatibility with standard indexable holders; fit is determined by shape, 7° relief, tolerance class, fastening method, size and thickness. The 0.4 mm radius contributes to edge strength for finishing passes, while the 3.97 mm thickness and the included-angle arrangement provide rigidity during heavier cuts. A cylindrical hole with a single-side countersink (40°–60°) enables precise clamping and repeatable positioning, reducing the risk of chatter and helping to maintain dimensional accuracy across long production runs. Longer tool life and economical machining under variable conditions With a single-sided chipbreaker tuned for steel and a robust universal grade, the insert is tailored for operations where cutting conditions vary or interruptions occur. Improved chip formation and evacuation reduce heat build-up and edge deterioration, which in turn extends tool life and lowers the cost per cut. Fewer indexings and longer service intervals translate into less downtime and higher productivity on the shop floor. The pragmatic design supports a wide material coverage while remaining easy to specify within established ISO systems, making it a dependable choice for both jobbing shops and production environments. Contact Metav Werkzeuge for tailored selection guidance on Tungaloy turning inserts or to request detailed technical data sheets at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6781039 SKU (manufacturer): TUN6781039 SKU: 6781039-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CCMT09T304 Facts Plate size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Special features Material: CVD-coated carbide (T9225) Shape: rhombic (CCMT) Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning (outside and inside) FAQ What materials is this insert suited for? The CCMT09T304 T9225 insert is optimised for steel machining; the T9225 grade is a robust universal choice for mid-to-heavy duty steel turning and combines toughness with wear resistance. How does the CVD coating benefit cutting performance? The CVD-coated carbide reduces flank wear and improves thermal resistance, so the insert maintains edge life and consistent surface finish under elevated temperatures and intermittent cuts. Is the insert compatible with standard ISO holders? Yes — the rhombic CCMT form and ISO conformity mean the insert seats correctly when matching holder form, 7° relief, tolerance class, fastening and size are observed. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm radius offers a balance between edge strength and surface quality, allowing fine finishing passes while improving resistance to edge chipping. Can the insert handle interrupted cuts? The T9225 grade and single-sided chipbreaker are selected to provide extra toughness for intermittently loaded cuts, making the insert suitable for interrupted and variable-engagement turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225, robust geometry and ISO compatibility for consistent medium to heavy steel turning; order the inserts directly via Metav Werkzeuge or consult our advisors for application-specific selection. CCMT09T304 T9225 CCMT indexable insert for turning – Tungaloy The CCMT09T304 T9225 is an ISO-format indexable turning insert designed for external and internal turning, offering a universal grade suited to medium to heavy steel machining. CVD-coated carbide grade T9225 Robust grade for medium to heavy steel Rhombic CCMT shape with 80° included angle Cylindrical hole with single-side countersink Consistent cutting performance under variable conditions The CCMT-format insert delivers a balance of toughness and wear resistance through its CVD-coated carbide composition and the T9225 grade. This combination supports stable chip formation and productive cutting in medium to heavy steel operations, especially where slight interruptions or varying engagement demand higher edge toughness. The CVD coating enhances abrasive wear resistance, extending effective edge life while maintaining dimensional accuracy over repeated indexings. As an ISO-standard insert, it provides predictable performance across matched toolholders and clamping systems. Geometry that improves stability and clamping reliability The rhombic CCMT form with an 80° included angle and 7° relief produces a strong cutting edge while permitting effective depth of cut control. The 0.4 mm corner radius increases edge strength and reduces the risk of chipping during interrupted cuts. A cylindrical hole with a single-side countersink (40°–60°) ensures secure clamping on compatible holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. These geometric decisions reduce chatter, improve surface finish and make the insert suitable for a wide range of turning tasks. Shop-floor advantages and application guidance Equipped with a one-sided chipbreaker, this insert assists in predictable chip control for typical turning feeds and depths, lowering the risk of entanglement and easing chip evacuation. The universal nature of the grade means fewer insert types are required in inventory, simplifying logistics while supporting consistent component quality. Selection of the correct chipbreaker or grade should match workpiece material, machining stability and the intended operation. A complete system generally comprises the ISO insert, a matching external holder or boring bar, a shim/locking kit and spare screws to ensure repeatable clamping. Contact Metav Werkzeuge today for tailored advice on using Tungaloy CVD-coated CCMT inserts and to order the correct inserts and matching clamping hardware for specific turning tasks – eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical Data Manufacturer article number: 6781451 SKU: 6781451-Tungaloy Manufacturer SKU: TUN6781451 Model series: ISO indexable turning inserts Material: Carbide Coating / grade: T9225 (CVD) Application: Turning Key dimensions Plate size: 09 Thickness: 3.97 mm Included angle: 80° Relief angle: 7° Corner radius: 0.4 mm Special features Rhombic CCMT geometry Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker CVD-coated carbide for improved wear resistance Suited to medium to heavy steel machining ISO-format insert; holder compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The CCMT09T304 T9225 indexable insert is designed primarily for medium to heavy steel machining; the T9225 grade and CVD coating support abrasive wear resistance and toughness needed for such applications. How is the insert secured in the holder? The insert features a cylindrical hole with a single-side countersink (40°–60°) for positive clamping; proper holder selection must match the insert form, size and tolerance class for secure fastening. Which chip control should be expected from this insert? The one-sided chipbreaker on this CCMT insert promotes controlled chip formation under typical turning feeds and depths, aiding chip evacuation and surface quality. Can this insert be used for interrupted cuts? Yes, the robust T9225 carbide grade provides increased toughness suited to slightly interrupted cuts and variable engagement conditions encountered in medium to heavy turning. What system components are required for a complete setup? A complete turning system comprises the ISO insert, a compatible external holder or boring bar, a shim or clamping kit and replacement screws for reliable, repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade that delivers toughness under interrupted cuts, precise ISO CCMT 09T304 geometry and stable chip control for uninterrupted production. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT 09T304 T9225 Turning Insert for turning — Tungaloy The CCMT09T304 T9225 is an ISO-standard indexable turning insert designed for medium to heavy steel turning, offering robust cutting performance with a one-sided chipbreaker and CVD coating. ISO CCMT 09T304 geometry CVD-coated carbide grade T9225 For medium to heavy steel turning One-sided chipbreaker with central hole Consistent performance for demanding steel turning The ISO indexable insert provides a reliable balance between toughness and wear resistance thanks to the CVD-coated carbide substrate and the T9225 grade, which is formulated for medium to heavy steel machining. With this combination, the insert maintains edge stability under variable entry conditions and slightly interrupted cuts, resulting in longer cutting intervals and fewer tool changes. The design supports efficient material removal while helping to protect the toolholder from excessive loads, which contributes to a more predictable process and reduced production interruptions. Precise geometry for controlled chips and secure clamping The insert’s geometry — corner radius 0.4 mm, 3.97 mm thickness and an 80° approach angle with a 7° relief angle — is tuned to promote consistent chip formation and surface quality. The one-sided chipbreaker works with the rhombic form to direct chips away from the cutting zone, while the central hole with a single-sided countersink (40°–60°) ensures reliable clamping and repeatable seating in compatible holders. These features simplify setup and lead to reproducible results across batches, reducing scrap and rework. Simple holder selection and system compatibility Belonging to the ISO turning inserts family, this insert integrates into a standard system comprising a suitable external holder or boring bar, an underlay/clamping set and replacement screws. Compatibility with a given holder is governed by the insert’s form, relief angle, tolerance class, mounting style, size and thickness, so matching these parameters ensures correct fit and performance. The insert’s rhombic shape and hole style make it straightforward to pair with common CCMT-compatible holders used in external and internal turning operations. Application guidance to maximise productivity The CVD-coated T9225 grade is a robust universal choice when processing steels under medium to heavy cutting conditions or when cutting conditions vary. Selecting this insert supports higher process stability and consistent surface finish in serial production. Where slightly interrupted cuts or variable engagement occur, the grade’s increased toughness reduces the risk of edge chipping and unexpected downtime. For best results, combine the insert with a holder matched for rigidity and use appropriate cutting parameters for steel to exploit the insert’s wear resistance and chip control. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy CCMT09T304 T9225 insert into production; email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and application support Technical data Article number: 6781074 Manufacturer SKU: TUN6781074 SKU: 6781074-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Material: cemented carbide Facts Corner radius: 0.4 mm Thickness: 3.97 mm Size: 09 Relief angle: 7° Approach (lead) angle: 80° Mounting: with hole and single-sided countersink (40°–60°) Special features Rhombic insert shape One-sided chipbreaker CVD coating Grade T9225 for medium to heavy steel turning Typical applications: external and internal turning Compatibility determined by form, tolerance class, mounting, size and thickness FAQ What materials is this insert intended for? The Tungaloy CCMT09T304 T9225 indexable insert is optimised for medium to heavy steel turning, providing toughness and wear resistance for variable cutting conditions. Which operations suit this insert best? External and internal turning operations are typical uses for this insert, where the one-sided chipbreaker and robust grade support consistent material removal. How is holder compatibility ensured? Holder compatibility is based on insert form, relief (clearance) angle, tolerance class, mounting style, size and thickness; matching these parameters ensures correct seating and performance. What are the key dimensional specs to check? Key dimensions include corner radius 0.4 mm, thickness 3.97 mm, size 09, relief angle 7° and approach angle 80°, plus the central hole with a single-sided countersink. Why choose the T9225 grade? The T9225 CVD-coated grade offers a robust universal combination of toughness and wear resistance, suitable for medium to heavy steel machining and slightly interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD‑coated carbide grade T9225 and a 0.4 mm nose radius to deliver stable chip formation and reliable performance in medium to heavy steel turning; order directly via Metav Werkzeuge or consult the team for application-specific advice. CCMT09T304 T9225 Turning insert (ISO CCMT) by Tungaloy — CVD‑coated carbide, 0.4 mm nose radius A CCMT09T304 T9225 turning insert engineered for medium to heavy steel turning, featuring a single‑sided chipbreaker and ISO CCMT form for compatibility with standard turning holders CVD‑coated carbide grade T9225 0.4 mm nose radius for accurate profiles 7° relief angle for versatile cutting ISO CCMT09 insert with 80° geometry Robust grade for demanding steel turning The CVD‑coated carbide grade T9225 is developed for robust, universal performance in the mid to heavy range of steel machining. Its formulation emphasises toughness and resistance to edge chipping under variable entry conditions, making it suitable where interrupted cuts or fluctuating engagement occur. This results in fewer unplanned insert changes and a more consistent production flow. The combination of the coating and substrate supports stable chip formation, which in turn helps to maintain process reliability on batch and continuous turning operations. Geometry that balances precision and edge strength With an ISO CCMT09 form, an included angle of 80° and a 0.4 mm nose radius, the geometry is optimised to deliver repeatable profiles and good surface finish without compromising edge robustness. The 7° relief angle contributes to controlled shear and predictable cutting forces across a range of feeds and depths, while the moderate nose radius helps to preserve dimensional accuracy on external and internal contours. For machining tasks that demand a consistent profile and reduced vibration, this geometry offers a practical balance between accuracy and tool life. ISO compatibility and secure assembly for workshop systems Compatibility with the clamping system is determined by insert form, relief angle, tolerance class, mounting style, size and thickness. This insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to match CCMT holder designs; the system typically consists of the insert, a suitable external holder or boring bar, a shim/clamping set and fastening screws. Selecting the appropriate single‑sided chipbreaker and the T9225 grade according to material, machining mode and machine stability ensures predictable performance and simplified tool management in the workshop. Productivity advantages and process integration Adopting this insert reduces tool change frequency and supports stable cutting conditions, which contributes to higher overall productivity and lower non‑productive time. The CVD coating improves wear resistance under continuous turning, while the robust substrate tolerates tougher engagement—delivering a cost‑effective balance of life and reliability. For procurement and stock management, the clearly defined ISO format and the Tungaloy grade simplify tool family planning and spare parts logistics, aiding rapid replacement and minimising downtime. For application guidance or to order original Tungaloy CCMT09T304 T9225 inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — the sales team will advise on holder compatibility and selection. Technical data Article number: 6781009 Manufacturer SKU: TUN6781009 Label: CCMT09T304 T9225 Tungaloy‑Wendeplatte SKU: 6781009‑Tungaloy Numbers / Core technical data Size: 09 Thickness: 3.97 mm Nose radius: 0.4 mm Relief angle: 7° Included angle: 80° Designs / Special features CVD‑coated carbide (T9225) Single‑sided chipbreaker With cylindrical hole and one‑side countersink (40°–60°) ISO CCMT form for turning FAQ What materials is this insert intended for? This insert, the CCMT09T304 T9225 from Tungaloy, is designed primarily for medium to heavy steel turning applications where toughness and reliable chip control are required. Which holder types are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance and mounting; the CCMT09T304 T9225 is compatible with standard ISO CCMT external holders and appropriate boring bars when matching the insert thickness and locating hole. How does the T9225 grade perform with interrupted cuts? The T9225 grade offers increased toughness and stable chip formation, making the CCMT09T304 T9225 insert well‑suited to interrupted or slightly unstable cutting conditions compared with more wear‑optimised grades. Can the insert be used for internal and external turning? Yes, the CCMT09T304 geometry and the 0.4 mm nose radius are suitable for both external and internal turning, provided the chosen holder and setup permit proper clearance and rigidity. What is the significance of the single‑sided chipbreaker? A single‑sided chipbreaker is optimised for a specified cutting direction and provides controlled chip formation; when paired with the T9225 grade, it supports consistent evacuation and process reliability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade and precise geometry for stable medium-to-heavy steel turning; the combination of T9225 toughness and a 0.4 mm corner radius delivers repeatable edge life and reliable chip control. Order the insert via Metav Werkzeuge or consult the team for application guidance and availability. CCMT09T304 T9225 CCMT Turning Insert by Tungaloy — CVD‑coated carbide, rhombic 80° geometry CCMT09T304 T9225 Tungaloy insert designed for ISO‑standard turning applications, offering a universal grade for medium to heavy steel machining Robust CVD‑coated carbide grade T9225 Rhombic 80° insert with 0.4 mm corner radius Single‑sided chipbreaker for controlled chips Compatible with ISO holders; with cylindrical hole + countersink 7° clearance angle for reliable cutting action Improve throughput with a universal, wear‑resistant grade The T9225 grade is a CVD‑coated carbide developed for productive turning under varying engagement conditions. Its formulation balances toughness and wear resistance, which reduces downtime from insert changes and supports consistent component tolerances in medium to heavy steel machining. Selecting this universal grade helps maintain a steady production pace when surfaces, feed rates or interrupted cuts fluctuate. Assured fit in ISO tool systems for repeatable results The insert conforms to ISO dimensions and is compatible with standard toolholders when form, clearance angle, tolerance class, clamping and thickness match the holder specification. The rhombic 80° geometry and the centre hole with a cylindrical bore plus single‑side countersink (40°–60°) ensure secure clamping and accurate location, which in turn supports repeatable set‑ups and minimises inspection rework in batch production. Controlled chip formation and edge stability under variable cuts A single‑sided chipbreaker combined with a 0.4 mm radius provides reliable chip control and a stable cutting edge for external and internal turning. The small corner radius allows fine surface finishes while preserving edge strength during light interruptions or changes in engagement. These characteristics translate directly into extended service life of the insert and fewer process stoppages for edge dressing or replacement. Practical system integration and straightforward logistics The ISO insert integrates easily into a standard turning system consisting of the indexable plate, a suitable external holder or boring bar, a clamp set/seat and replacement screws. Clear identification by SKU and manufacturer reference streamlines ordering and stock management, while the standardised size and thickness simplify tool inventory and reduce the chance of mismatched components on the shop floor. For productive, reliable steel turning with Tungaloy quality, request stock and application advice from Metav Werkzeuge—our consultants can recommend the matching holder and cutting data for the CCMT09T304 T9225 insert Technical data Article number: 6781220 Manufacturer SKU: TUN6781220 SKU: 6781220-Tungaloy Designation: CCMT09T304 Model series: ISO‑turning inserts Material: carbide Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Plate size: 09 Special features Grade: T9225 Coating: CVD‑coated Shape: rhombic Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning; external and internal Suitable for medium to heavy steel machining ISO‑standard insert; compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is the insert suitable for? The CCMT09T304 T9225 insert is designed primarily for medium to heavy steel machining and performs well under variable engagements where increased toughness is required. Is this insert compatible with standard ISO holders? Yes; the CCMT09T304 follows ISO dimensions—compatibility depends on matching the holder form, clearance angle, tolerance class, clamping method, size and thickness. What advantages does the T9225 grade offer? T9225 is a robust universal grade with a CVD coating that offers a balance of wear resistance and toughness, which is particularly beneficial for interrupted cuts and changing cutting conditions. How does the 0.4 mm radius influence surface finish and edge life? A 0.4 mm corner radius provides improved edge strength for interrupted cuts while allowing good surface finish, reducing the need for frequent index changes. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, an ISO‑standard CCMT geometry and a 0.4 mm corner radius for consistent medium to heavy steel turning; order directly via Metav Werkzeuge or ask the consultants for application support. CCMT 09T304 T9225 indexable insert for turning – Tungaloy CCMT09T304 T9225 is an ISO‑standard rhombic indexable insert designed for turning applications, providing a tough universal grade for varying engagement conditions. ISO‑standard CCMT geometry CVD‑coated carbide grade T9225 0.4 mm corner radius for robustness Increase machining reliability with a universal CVD grade The CVD‑coated carbide grade T9225 offers a balance of toughness and wear resistance tailored to medium and heavy steel turning. This insert is designed to tolerate mildly interrupted cuts and variable engagement, so stability in batch and single‑piece production is improved. The combination of a robust substrate and a hard coating helps to reduce edge wear and extend tool life, which translates into fewer tool changes and more predictable cycle times. Definite geometry for secure clamping and consistent results The rhombic CCMT form with a 0.4 mm corner radius and an 80° lead angle ensures secure seating in compatible holders and promotes stable cutting forces when turning external and internal contours. The insert is available with hole that features a cylindrical bore plus a single‑sided countersink (40°–60°), enabling reliable fixation and repeatable positioning. These attributes help maintain dimensional accuracy and surface finish consistency across repeated operations. Practical compatibility and mounting considerations Compatibility with a toolholder depends on form, clearance angle, tolerance class, attachment method, size and thickness. The insert offers a 7° clearance angle and a plate thickness of 3.97 mm, matching common holder specifications for ISO turning systems. Selecting an appropriate external holder, clamp set and replacement screw ensures correct seating and clamping force, reducing chatter and improving tool life. The ISO designation also simplifies procurement and inventory management across workshops. Benefits in process planning and material coverage As a universal turning grade, this insert covers a broad range of steel machining tasks and is advised where a mix of roughing and semi‑finishing occurs. The one‑sided chipbreaker assists in chip control for many cutting conditions, cutting down on manual intervention and promoting safer chip evacuation. Choosing this insert supports process stability and facilitates straightforward tool selection when machining different batch sizes or when encountering slightly interrupted cuts. For specific advice on use cases or to secure the CCMT09T304 T9225 Tungaloy insert for production, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781479 Manufacturer SKU: TUN6781479 Model series: ISO‑turning indexable inserts Facts Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Lead angle: 80° Size: 09 Special features Shape: rhombic (CCMT form) Coating / grade: T9225 (CVD‑coated) Material: carbide Chipbreaker: one‑sided Hole: with hole; cylindrical + single‑sided countersink (40°–60°) Application: turning; medium to heavy steel machining FAQ What is the primary application for this insert? The CCMT09T304 T9225 Tungaloy indexable insert is intended for turning, covering external and internal operations in medium to heavy steel machining. Which material range does the T9225 grade suit best? Tungaloy’s T9225 is a universal CVD‑coated carbide grade optimised for steel, providing toughness for interrupted cuts and stability in varying engagement conditions. How does the insert fix to the holder? The insert features a hole with a cylindrical bore and single‑sided countersink (40°–60°) for reliable clamping; compatibility depends on holder form, clearance and thickness. Is this insert suitable for finishing and roughing? Yes, the one‑sided chipbreaker and T9225 grade make the insert suitable for combined roughing and semi‑finishing tasks in steel turning. What are the identifying product numbers? Label: CCMT09T304 T9225 Tungaloy‑indexable insert; Article number 6781479; Manufacturer SKU TUN6781479 Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Reliable combination of CVD-coated carbide T9225 and ISO CCMT geometry delivers robust performance for medium to heavy steel turning; the 0.4 mm corner radius and 7° clearance provide versatility for external and internal turning. Order the CCMT09T304 T9225 Tungaloy insert directly via Metav Werkzeuge or consult our technical advisers for holder compatibility. CCMT 09T304 T9225 Turning Insert — Tungaloy, CVD-coated carbide, 0.4 mm radius CCMT09T304 T9225 Tungaloy insert is an ISO rhombic indexable insert for turning, optimised for medium to heavy steel machining with a single-sided chipbreaker and a cylindrical hole with one-sided countersink ISO rhombic CCMT geometry CVD-coated T9225 for steel machining 0.4 mm corner radius for versatility Cylindrical hole with countersink Consistent performance under mixed cutting conditions The combination of a CVD-coated surface and a carbide substrate in the T9225 grade provides a balanced mix of wear resistance and toughness, which is particularly effective in medium to heavy steel turning. The single-sided chipbreaker helps control chip flow under varying engagement and stability conditions, reducing the risk of built-up edge and improving tool life. For production environments where cut interruptions or variable feed occur, this blend of coating and substrate translates into fewer insert changes and steadier cycle times. Secure clamping and system compatibility for reliable machining Compatibility with the toolholder depends on form, clearance angle (7°), tolerance class, fastening method, size and thickness (3.97 mm). The ISO rhombic CCMT form and the insert’s cylindrical hole with one-sided countersink (40°–60°) enable positive seating and repeatable clamping in matched CCMT holders or boring bars. The 0.4 mm corner radius offers a compromise between edge strength and surface finish, making the insert suitable for both roughing and finishing passes when paired with the correct holder geometry and stable setup. Practical shop-floor benefits and application guidance Using an ISO standard insert simplifies inventory and holder selection across a range of turning tasks: external and internal turning, interrupted cuts and varied feed scenarios. The T9225 grade is a robust universal choice when moderate toughness is required alongside wear resistance. For non-specialists: CVD coating is a thin, chemically deposited protective layer that increases resistance to abrasion and thermal degradation; the chipbreaker is a small geometry on the rake face that shapes chips for safe evacuation. Together these features reduce machine downtime and help maintain consistent part quality in serial production. For secure and productive steel turning, choose the Tungaloy CCMT09T304 T9225 insert — order via Metav Werkzeuge or contact our consultants for holder matching and application advice. Technical data Article number: 6781013 Manufacturer SKU: TUN6781013 Metav SKU: 6781013-Tungaloy Name: CCMT09T304 T9225 Tungaloy turning insert Core data Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Material: carbide (cemented carbide) Coating: T9225 (CVD) Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Plate form: rhombic (CCMT) Typical application: external and internal turning System components: matching holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert designed to machine? The CCMT09T304 T9225 insert is designed primarily for steel machining, offering a robust universal performance suitable for medium to heavy turning tasks. How does the T9225 coating benefit production? The T9225 CVD coating provides improved wear resistance and thermal stability, which prolongs insert life under mixed engagement and helps maintain consistent surface quality. Which holders are compatible with this CCMT insert? Compatibility depends on holder form, 7° clearance, tolerance class, fastening and size; matching CCMT holders or compatible boring bars fitted with the correct shim/clamp set are suitable for this insert. What chip control can be expected with this geometry? The built-in single-sided chipbreaker shapes chips effectively during interrupted or variable cutting, improving evacuation and reducing risk of entanglement. What is the full article and manufacturer identification for ordering? Article number 6781013, Manufacturer SKU TUN6781013 — the item is listed as CCMT09T304 T9225 Tungaloy turning insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust wear resistance, ISO compatibility and stable chip control for uninterrupted production in medium to heavy steel turning applications. Benefit from a CVD-coated carbide grade that extends tool life and reduces changeovers — order directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT09T304 T9225 – ISO turning insert for turning by Tungaloy The CCMT09T304 T9225 is an ISO-standard rhombic indexable turning insert designed for medium to heavy-duty turning operations, offering a balance of wear resistance and toughness for variable cutting conditions. CVD-coated carbide for improved wear resistance Universal T9225 grade for medium to heavy steel Rhombic CCMT 09 form, 7° clearance angle Single-sided chipbreaker and cylindrical hole Longer tool life through a balanced CVD-coated grade The CVD-coated carbide substrate delivers a combination of surface hardness and core toughness that reduces flank wear and resists abrasive abrasion during extended runs. The T9225 grade is formulated as a robust universal solution for steel turning where varying engagement or lightly interrupted cuts demand extra toughness. This results in fewer indexings and longer intervals between tool changes, directly improving machine uptime and reducing overall machining costs. Predictable fit and repeatable accuracy in ISO systems Designed to ISO dimensions, the insert ensures consistent seating and repeatable geometry when paired with standard holders. The CCMT 09 rhombic shape with a 7° clearance angle and an included angle of 80° provides versatile cutting geometry for both external and internal turning. With a corner radius of 0.4 mm and a plate thickness of 3.97 mm, the insert delivers stable cut engagement and predictable cutting forces, aiding in surface finish and dimensional consistency across batches. Stable chip control and improved process security The one-sided chipbreaker is optimised for steel machining and supports effective chip control, particularly under heavier depths of cut. The insert’s cylindrical hole with a single-side countersink (40°–60°) enables secure clamping and accurate positioning on the seat, while the chipformer geometry helps maintain a stable cutting process. The result is fewer interruptions for manual chip clearing and a lower risk of edge fracture in mixed cutting conditions. Easy selection and integration into workshop workflows Selection is straightforward: pair the insert with an appropriately rated external holder or boring bar and match form, clearance angle, tolerance class, fastening and thickness to the application. The combination of universal grade, single-sided chipbreaker and standard ISO format simplifies inventory management and supports flexible deployment across turning tasks. For manufacturers aiming to improve throughput without complex retooling, this insert represents a practical step towards greater productivity. For process recommendations or to procure Tungaloy indexable turning inserts with the T9225 grade, contact Metav Werkzeuge for expert advice and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6780679 SKU: 6780679-Tungaloy Manufacturer SKU: TUN6780679 Material: carbide Model series: ISO turning insert series Facts Size: 09 Plate designation: 09T304 Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Grade/coating: T9225 (CVD-coated) Plate form: rhombic (CCMT) Chipbreaker: single-sided Hole: cylindrical hole + single-side countersink (40°–60°) Application: turning Compatibility: ISO holder compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CCMT09T304 T9225 insert is primarily specified for medium to heavy steel turning and performs well where extra toughness is needed. How does the T9225 grade behave under interrupted cuts? Tungaloy’s T9225 grade offers increased toughness compared with finer grades, making the insert more resistant to impact and suitable for lightly interrupted or variable engagement conditions. Which holder types will fit this insert? Any ISO-compatible external holder or boring bar designed for CCMT 09 format and matching plate thickness and tolerance class will seat this insert correctly. What effect does the 0.4 mm corner radius have? A 0.4 mm corner radius provides a good balance between edge strength and surface finish, helping to absorb cutting forces while maintaining acceptable roughness on turned components. Is the insert indexable and reversible? The indexable design allows rotation to a fresh cutting edge when permitted by the chipformer and hole configuration, enabling economical use of each insert face. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 T9225 Wendeplatten - Tungaloy
CCMT09T304 T9225 Tungaloy-Wendeplatte ISO-Drehwendeschneidplatte zum Drehen Die CCMT09T304 T9225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen von Stahl mit hoher Zähigkeit bei wechselnden Schnittbedingungen. Universalsorte T9225 für mittlere bis schwere Bearbeitung CVD-beschichtetes Hartmetall für erhöhte Standzeit ISO-Normform CCMT für breite Halterkompatibilität Zylindrisches Loch mit Senkung für sichere Spannung Eckenradius 0,4 mm für konstante Schnittkräfte Robustheit und Schneidstoff für anspruchsvolle Stahlzerspanung Die Kombination aus Hartmetall und CVD-Beschichtung macht die Platte widerstandsfähig gegen Verschleiß und thermische Belastung. Durch die Sorte T9225 wird eine erhöhte Zähigkeit erreicht, die besonders bei leicht unterbrochenen Schnitten oder variierenden Eingriffsbedingungen von Vorteil ist. Das Ergebnis ist eine zuverlässige Standzeit und konstante Prozesssicherheit bei der Serienfertigung. Präzise Form und sichere Befestigung für stabile Bearbeitung Die rhombische Plattenform CCMT sowie das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgen für exakte Zentrierung und sichere Spannlage im Halter. Der definierte Freiwinkel 7° und der Eckenradius 0,4 mm ermöglichen reproduzierbare Schnittbedingungen und erleichtern die Einstellung von Schnitttiefe und Vorschub für wiederholgenaue Ergebnisse. Vielseitiger Einsatzbereich und Auswahl des Spanbrechers Die Platte ist für das Drehen ausgelegt und deckt mit der einseitigen Spanbrecher-Ausführung typische Anforderungen an Außen- und Innendrehprozesse ab. Anwender profitieren von der einfachen Auswahl nach Werkstoff, Bearbeitungsart und Stabilität; die Sorte T9225 empfiehlt sich besonders für Stahl und legierte Werkstoffe, wenn hohe Zähigkeit gefragt ist. Wirtschaftlichkeit und Integration in Produktionsprozesse Dank ISO-Standardisierung lässt sich die Platte leicht in vorhandene Werkzeugsysteme integrieren, was Rüstzeiten reduziert und Prozesseffizienz erhöht. Die robuste Materialkombination bietet ein gutes Kosten-Nutzen-Verhältnis durch verlängerte Standzeiten und weniger Maschinenstillstand. Einsatzempfehlung: Auswahl von Halter und Unterlage nach Form, Freiwinkel und Toleranzklasse abstimmen. Empfehlung: Für produktive Stahlzerspanung die CCMT09T304 T9225 Tungaloy-Wendeplatte über Metav Werkzeuge anfragen – technische Beratung per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6781123 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CCMT09T304 T9225 Tungaloy-Wendeplatte Hersteller Artikelnummer: 6781123 Hersteller SKU: TUN6781123 Fakten Eckenradius: 0,4 mm Plattendicke: 3,97 mm Plattengröße: 09 Winkel: 80° Freiwinkel: 7° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung für hohe Haftfestigkeit) Sorte: T9225 (robuste Universalsorte für mittlere bis schwere Stahlbearbeitung) Spanbrecher: einseitig Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Für welche Werkstoffe ist die CCMT09T304 T9225 Wendeplatte geeignet? Die CCMT09T304 T9225 Tungaloy-Wendeplatte ist insbesondere für Stahl und legierte Stähle ausgelegt; die Sorte T9225 bietet erhöhte Zähigkeit bei wechselnden Schnittbedingungen. Wie wirkt sich der Eckenradius 0,4 mm auf das Ergebnis aus? Ein Eckenradius von 0,4 mm sorgt für stabile Schnittkräfte und eine robuste Kante, die bei wechselnden Eingriffssituationen die Kantenausbruchsneigung reduziert. Welche Vorteile bietet die CVD-Beschichtung bei dieser Wendeplatte? Die CVD-Beschichtung erhöht die Haftfestigkeit zwischen Beschichtung und Substrat und verbessert die Wärmebeständigkeit, was zu längerer Standzeit und besserer Verschleißresistenz bei der CCMT09T304 Tungaloy-Wendeplatte führt. Worauf ist bei der Auswahl des Halters zu achten? Auf Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke achten; die ISO-Genormtheit der CCMT09T304 vereinfacht die Kompatibilitätsprüfung mit Standardaußenhaltern. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte T9225 wurde für wechselnde Eingriffsbedingungen konzipiert und bietet ausreichende Zähigkeit für leicht unterbrochene Schnitte. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT 09T308 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH120 carbide grade, a 0.8 mm corner radius and ISO compatibility for consistent, reliable turning results; order the insert via Metav Werkzeuge or contact our consultants for application advice. CCMT09T308 AH120 turning insert by Tungaloy — PVD-coated carbide, 0.8 mm radius CCMT09T308 AH120 is an indexable turning insert designed for external and internal turning where a sharp cutting edge and high process security are required. PVD-coated carbide AH120 0.8 mm corner radius Rhombic ISO size 09 Single-sided chipbreaker with hole Increased productivity through consistent cutting performance The PVD-coated AH120 cutting grade is optimised for wear resistance and fracture toughness, delivering stable chip formation and extended tool life in turning operations. The combination of the carbide substrate and thin, robust coating reduces flank wear and supports predictable tool change intervals, which contributes directly to higher uptime on production lathes. By selecting this grade, process planners achieve a measurable improvement in repeatability and a reduction in unplanned stoppages, especially in medium-duty turning tasks. Robust geometry for reliable machining and clamping With a 0.8 mm corner radius, a 7° relief angle and an 80° included angle, the insert geometry balances edge strength and versatility for both finishing and light roughing. The rhombic form in ISO size 09 together with the cylindrical hole and one-sided countersink (40°–60°) ensures secure location in compatible ISO holders and straightforward assembly with standard clamping sets. The single-sided chipbreaker is matched to the grade to promote consistent chip control and surface quality while maintaining cutting-edge stability. Practical application guidance and material suitability Designed specifically for turning, the indexable plate suits both external and internal operations when matched to an appropriate holder and cutting parameters. The PVD-coated carbide is particularly effective where a sharp cutting edge and process safety are priorities; it performs well across a wide range of steels and is recommended when predictable wear behaviour and reduced edge chipping are required. For best results, pair the insert with a holder that matches the form, tolerance class and thickness (3.97 mm) and choose cutting data aligned with the insert’s chipbreaker and the workpiece material. For reliable turning with the Tungaloy AH120 grade, contact Metav Werkzeuge for purchase and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and cutting parameters. Technical Data Article number: 6818339 SKU: 6818339-Tungaloy Manufacturer SKU: TUN6818339 Model series: ISO turning inserts Brand: Tungaloy Facts Thickness: 3.97 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 7° ISO size: 09 Materials & Special features Material: Carbide (PVD-coated AH120) Shape: Rhombic Hole: Cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: Single-sided Application: Turning (external and internal) Series: ISO turning insert CCMT09T308 FAQ What materials is this insert suitable for? The CCMT09T308 AH120 insert is specified for turning and the PVD-coated AH120 grade provides wear resistance and edge strength suitable for a broad range of steels and general turning applications. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge robustness compared with finer radii, improving resistance to chipping during interrupted cuts while still allowing reasonable surface finish in finishing operations with the CCMT09T308 insert. Which holder features are required for secure clamping? A compatible ISO turning holder that matches the rhombic form, thickness (3.97 mm), tolerance class and the insert’s hole style is required for secure clamping of the CCMT09T308 AH120 plate. Can this insert be used for internal turning? Yes, the design and geometry of this indexable insert make it suitable for both external and internal turning when the correct holder and cutting data are used. What advantages does the AH120 grade provide in production? The AH120 grade delivers a balance of wear resistance and fracture toughness, supporting stable chip formation, extended tool life and consistent results in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide reliability, a sharp cutting edge and ISO compatibility for steady productivity and reduced tool change frequency. Available to order via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. CCMT 09T308 AH120 Tungaloy indexable insert for turning (ISO 09T308) A CCMT09T308 AH120 indexable turning insert designed for external and internal turning, offering high wear resistance and process-secure cutting in ISO-compliant tool systems. PVD-coated carbide grade AH120 Sharp cutting edge for process security Rhombic ISO form 09 with 80° cutting angle Cylindrical hole with 40°–60° single countersink Consistent productivity through a wear-resistant cutting grade The PVD-coated carbide grade AH120 delivers a balance of wear resistance and edge strength suited to demanding turning operations. The coating provides a hard, thin layer that reduces abrasive wear and preserves a sharp cutting edge, which in turn maintains dimensional accuracy over longer runs. For production environments where cycle times and repeatability matter, this cutting grade supports stable metal removal rates and helps to reduce unplanned tool changes, contributing to overall process efficiency and lower unit costs. Clear compatibility rules to avoid setup errors Compatibility within ISO systems is determined by geometry and tolerance: form, relief angle, tolerance class, clamping method, size and thickness. The rhombic form 09 and standardised mounting dimensions ensure the insert fits any matching holder when these parameters align. The central feature to check is the insert’s hole and countersink style, which here is a cylindrical hole with a single-sided countersink at 40°–60°; this secures correct seating and torque transmission during turning. Making these checks before mounting reduces downtime and prevents clamping-related failures. Geometry and chip control explained for reliable finishes An 80° cutting angle combined with a 7° relief provides a robust cutting geometry that balances shear action and flank clearance. The 0.8 mm corner radius increases edge strength for interrupted cuts and improves surface integrity on finished components. The insert’s single-sided chipbreaker is designed to control chip formation according to workpiece material and machining stability; selecting the appropriate chipbreaker and feed parameters reduces the risk of built-up edge and promotes consistent surface quality. These geometric choices support both roughing and finishing tasks when matched to machine rigidity and process parameters. Where the insert adds value and how to specify it Intended for general turning applications, the indexable insert is suited to both external and internal turning operations where a sharp, wear-resistant edge is required. For best results, pair the insert with a holder that matches the ISO dimensions and confirm the clamping set and spare screws as part of the system. The grade’s combination of wear resistance and chipping resistance makes it a pragmatic choice for mixed-production shops seeking predictable tool life. For application-specific guidance—material pairing, recommended feeds or chipbreaker selection—consult Metav Werkzeuge’s technical documentation or speak with a specialist to align the insert with machining objectives. For application advice or availability of the Tungaloy AH120 grade, contact Metav Werkzeuge for prompt consultation and order handling — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6824254 Manufacturer SKU: TUN6824254 Item SKU: 6824254-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade: AH120 Facts Size: 09 Insert designation: 09T308 Thickness: 3.97 mm Corner radius: 0.8 mm Cutting angle: 80° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + single countersink (40°–60°) Special features Rhombic insert form Single-sided chipbreaker PVD-coated carbide Designed for external and internal turning ISO-standardised geometry FAQ What machining tasks is this insert intended for? The insert is intended for turning operations; the CCMT09T308 AH120 Tungaloy indexable insert suits both external and internal turning tasks where wear resistance and edge stability are required. How does the AH120 grade improve tool life? The AH120 grade uses a PVD-coated carbide structure that reduces abrasive wear and resists chipping, which helps the insert maintain a sharp cutting edge and extend effective life in many turning applications. Which holders are compatible with this ISO insert? Compatibility depends on matching form, relief angle, tolerance class, clamping method, size and thickness; holders conforming to the ISO 09 form and the 3.97 mm thickness will accept the insert when these parameters align. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius increases edge strength and typically produces a robust surface finish; it is well suited to operations where a balance between roughing stability and acceptable surface integrity is needed. How does the hole and countersink affect mounting? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure seating and correct torque transfer when clamped with the appropriate screw and pad, reducing the risk of insert movement during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH120 Wendeplatten - Tungaloy
Combine robust wear resistance, a sharp 0.8 mm nose radius and ISO compatibility for predictable turning performance; obtain reliable inserts and expert advice from Metav Werkzeuge for seamless production planning. CCMT 09T308 AH120 – Indexable turning insert, PVD-coated carbide (Tungaloy) CCMT 09T308 AH120 is an ISO-standard indexable insert designed for external and internal turning, offering a sharp cutting edge and high process security. PVD-coated carbide grade AH120 Sharp 0.8 mm nose radius 7° clearance for reliable cut Rhombic form with cylindrical hole Engineered for stable cutting and long life The PVD-coated carbide grade AH120 delivers a balance of wear resistance and edge strength that supports continuous turning operations. The coating enhances surface hardness and reduces adhesive wear, while the substrate maintains fracture resistance; together these properties extend the effective tool life and reduce unexpected downtime. Specified geometry such as the 0.8 mm nose radius and the defined clearance angle (7°) contribute to a consistent cutting action, enabling stable chip formation and repeatable machining results across batch runs. Designed to increase workshop productivity A single-sided chipbreaker combined with the robust grade reduces rework and supports predictable tool change intervals, improving overall machine uptime. The insert’s profile and sharp edge are optimised for achieving a good surface finish with reduced cutting forces, which can lower cycle times and tool costs per component. Compatibility with ISO holders ensures quick replacement and minimal set-up time; choosing the right chipbreaker and grade for the workpiece and machine rigidity converts these technical features into measurable production benefits. Clear mounting and dimensional data to aid selection The insert follows ISO norms for turning plates and must be paired with a matching clamping set and holder determined by form, free angle, tolerance class, fastening method, size and thickness. Important dimensional facts include a 3.97 mm plate thickness, a rhombic 80° included angle, and a cylindrical hole with a single-sided countersink (40°–60°) for secure seating. These details simplify procurement and ensure the plate locates correctly in standard external or boring holders, avoiding instability that can compromise finish and tool life. Practical application guidance for turning tasks This indexable plate is intended specifically for turning applications where a sharp cutting edge and process reliability are required. The combination of PVD-coated surface and a tough carbide substrate makes it suitable for operations that demand consistent edge retention and resistance to chipping. Select the plate variant and chipbreaker that best match the workpiece material, cutting mode and machine rigidity to transform material properties into dependable production outcomes with predictable tool performance. Contact Metav Werkzeuge to discuss the Tungaloy AH120 grade for the intended turning application and to receive tailored recommendations on holder compatibility and chipbreaker selection; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: 6824258 Manufacturer SKU: TUN6824258 Metav SKU: 6824258-Tungaloy Type designation: CCMT09T308 Label: CCMT09T308 AH120 Tungaloy-Wendeplatte Facts Plate thickness: 3.97 mm Nose radius: 0.8 mm Clearance angle: 7° Included angle: 80° Size: 09 Special features Material: carbide Coating: PVD Shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) FAQ What materials is this insert intended to machine? This CCMT 09T308 AH120 indexable insert from Tungaloy is designed for turning operations where a sharp cutting edge and process security are required; select the appropriate chipbreaker and parameters to match the specific workpiece material. How does the AH120 grade improve tool life? The PVD-coated AH120 grade combines surface hardness with a fracture-resistant substrate, which reduces adhesive wear and chipping for longer, more predictable tool life in the CCMT 09T308 format. Which holder features are necessary for correct mounting? Secure mounting requires a holder that matches the rhombic form, size 09, plate thickness and the cylindrical hole plus single-sided countersink; correct tolerance class and fastening method ensure stable seating. Is this insert suitable for both external and internal turning? Yes, the ISO-standard geometry and the single-sided chipbreaker make the plate suitable for both external and internal turning tasks when paired with the correct holder and cutting data. Can this insert be used on high-speed operations? The PVD coating and the AH120 substrate provide wear resistance appropriate for demanding turning tasks; verify machine rigidity and cutting parameters to determine suitability for high-speed conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade tailored for stainless steels, a rhombic CCMT09T308 geometry with a 0.8 mm corner radius, and clear specifications for holder compatibility to keep turning operations consistent and productive. Order the CCMT09T308 AH6225 insert directly via Metav Werkzeuge or consult Metav Werkzeuge for application advice. CCMT 09T308 AH6225 indexable turning insert by Tungaloy — PVD-coated carbide, rhombic 09 CCMT09T308 AH6225 is an ISO-form indexable insert for external and internal turning, designed for medium machining of stainless steels and variable production conditions PVD-coated carbide for stainless steels Sharp yet stable cutting edge Rhombic 09 form, 80° approach angle Single-sided chipbreaker, 0.8 mm corner radius Consistent performance for stainless steel turning The insert is made from a PVD-coated carbide grade AH6225, engineered as a universal grade for stainless steels. The combination of a sharp yet resilient edge and the selected coating improves heat resistance and wear behaviour during interrupted cuts or changing feed conditions. As a result, the cutting edge delivers repeatable surface finish and dimensional control, supporting stable cycle times in serial and batch turning applications. Secure compatibility and reliable clamping for production Compatibility with toolholders depends on form, clearance, tolerance class, fixing method, size and thickness; this ISO-compliant plate simplifies selection for standard holders. The rhombic form with an 80° approach angle and a 7° clearance angle provides predictable engagement during external and internal turning. A central hole with a cylindrical bore and a single-sided countersink (40°–60°) ensures straightforward clamping and repeatable seat positioning, reducing setup variance and enhancing process reliability. Design features that support productivity and tool life The single-sided chipbreaker is matched to the grade for efficient chip control in medium turning operations, while the 0.8 mm corner radius balances edge strength and surface integrity. With a plate thickness of 3.97 mm and ISO size 09, the geometry suits common holders and applications where a compromise between rigidity and accessibility is required. The PVD-coated carbide substrate offers extended tool life under varying cutting conditions, contributing to lower tool-change frequency and steady productivity. For reliable turning results with Tungaloy inserts, contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947666 SKU: 6947666-Tungaloy Manufacturer SKU: TUN6947666 Model series: ISO turning indexable inserts Designation: CCMT09T308 Grade: AH6225 Material: carbide Thickness: 3.97 mm Facts Corner radius: 0.8 mm Insert size: 09 Approach angle: 80° Clearance angle: 7° Plate form: rhombic Special features PVD-coated grade AH6225 Single-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) For external and internal turning (Drehen) Universal grade for stainless steels FAQ What materials is this insert suitable for? The CCMT09T308 AH6225 Tungaloy indexable insert (SKU 6947666-Tungaloy) is specified as a universal PVD-coated carbide grade optimised for machining stainless steels in medium turning operations. How does the chipbreaker affect machining? The single-sided chipbreaker on this rhombic insert promotes controlled chip formation and evacuation; matched with the AH6225 grade it reduces recutting and supports consistent surface quality during interrupted or variable cuts. Which toolholders are compatible with this ISO plate? Compatibility is governed by the insert form, size, thickness and fixing geometry; the ISO CCMT09T308 designation and its central hole with countersink enable use with standard CCMT-compatible turning holders when the holder specification matches the insert geometry. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a balance between edge strength and surface finish: it increases edge stability under load while maintaining the ability to achieve the desired profile and tolerance in typical turning operations. Is this insert suitable for external and internal turning? Yes; the CCMT09T308 geometry and the AH6225 universal grade are intended for both external and internal turning tasks where medium machining and variable cutting conditions occur. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for stainless steels, a 0.8 mm corner radius for reliable edge strength, and ISO compatibility for straightforward toolholder integration; order the inserts through Metav Werkzeuge or request tailored application advice from our consultants. CCMT09T308 AH6225 Tungaloy turning insert – PVD-coated carbide, 0.8 mm corner radius The CCMT09T308 AH6225 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a sharp yet stable cutting edge for medium machining of stainless steels. ISO rhombic insert CCMT09T308 AH6225 PVD-coated carbide for stainless steel 0.8 mm corner radius, 80° cutting angle Cylindrical hole with 40°–60° countersink Increased productivity with a universal cutting grade The AH6225 grade, delivered as a PVD-coated cemented carbide insert, combines edge sharpness and robustness to handle medium cutting depths and fluctuating machining conditions. This balance reduces the need for frequent tool changes and supports longer uninterrupted runs, which in turn improves process efficiency on stainless-steel parts. The sharp, stable cutting edge minimises built-up edge formation in many common stainless alloys, while the coating supports thermal and abrasive resistance during sustained operation. Reliable clamping and repeatable geometry for consistent results Manufactured to ISO dimensions, the insert’s rhombic geometry and 80° cutting angle ensure straightforward compatibility with standard holders; fit is governed by form, clearance angle, tolerance class, attachment and plate thickness. The central cylindrical hole with a single-sided countersink (40°–60°) facilitates secure clamping and repeatable seating, reducing setup variability. The 3.97 mm thickness and precise tolerances contribute to stable cutting behaviour and predictable tool life when paired with appropriate underlay, clamping set and replacement screws. Application benefits and machining guidance A 0.8 mm corner radius delivers a compromise between edge strength and profile definition: it supports modest radii required for finishing while preserving robustness under interrupted cuts. The one-sided chipbreaker assists in controlling chip formation for many turning tasks, helping to protect the insert’s edge and the workpiece surface finish. Intended for turning operations, the insert is suitable for both external and internal work when combined with a matching ISO holder. If further details are needed on feeds, speeds or holder compatibility, Metav Werkzeuge provides application support via email or phone at info@metav-werkzeuge.com and +49 2822 7131930. For tailored advice on using the Tungaloy CCMT09T308 AH6225 insert in stainless-steel turning and to request suitable holder recommendations, contact Metav Werkzeuge for application guidance and ordering assistance. Technical data Article number: 6903270 SKU: 6903270-Tungaloy Manufacturer SKU: TUN6903270 Model series: ISO turning inserts Brand: Tungaloy Core dimensions Size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting angle: 80° Special features Material: cemented carbide Coating: PVD Chipbreaker: one-sided Plate form: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suitable for? The CCMT09T308 AH6225 insert is formulated for machining stainless steels; the AH6225 grade and PVD coating offer a good balance of edge stability and wear resistance for medium turning operations. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength compared with smaller radii, providing improved resistance to chipping during interrupted cuts while still allowing acceptable surface finishes for general turning tasks. Is the insert compatible with ISO holders? Yes. The insert conforms to ISO dimensions (CCMT09T308) and requires a holder that matches form, clearance angle, tolerance class, attachment and thickness — the ISO-standard geometry ensures broad compatibility. What fastenings and clamping features does this insert require? The insert features a central cylindrical hole with a single-sided countersink (40°–60°) and is intended to be used with a matching underlay or clamping set and replacement screws for secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH6225 in an ISO CCMT format to get a sharp yet stable cutting edge for consistent mid-range turning of stainless steels; for tailored advice or availability, contact Metav Werkzeuge or request support from our consultants. CCMT 09T308 AH6225 ISO turning insert — rhombic CCMT, 80° included angle, Tungaloy CCMT09T308 AH6225 is an ISO‑standard rhombic turning insert designed for external and internal turning; the insert combines a PVD-coated carbide grade for reliable edge stability with a single‑sided chipbreaker for controlled chips under varying conditions. PVD-coated carbide AH6225 Optimised for stainless steel turning Rhombic CCMT shape, 80° cutting angle Single-sided chipbreaker, sharp stable edge Reliable edge geometry for consistent machining results The combination of AH6225 grade and a PVD-coated surface provides a balance between edge sharpness and robustness, which is particularly valuable when machining stainless steel. The coating enhances resistance to built-up edge and heat, while the carbide substrate maintains dimensional stability during typical medium‑duty turning. This results in fewer interruptions for insert changes and a more predictable tool life, supporting higher uptime and process reliability on the shop floor. ISO compatibility and straightforward holder selection Produced to ISO specifications in the CCMT format, the insert ensures compatibility with most standard CCMT holders when matching form, relief angle and tolerance. The geometry features an 80° included angle and a 7° relief angle, with a plate thickness of 3.97 mm and a 0.8 mm corner radius; the mounting uses a cylindrical hole with a one‑sided countersink (40°–60°). These standardised dimensions simplify holder choice and tool assembly, reducing setup time and the risk of mismatched fixtures. Improved chip control and surface quality The one‑sided chipbreaker is designed for effective chip control in both external and internal turning operations, producing predictable chip flow that reduces the likelihood of surface damage. The sharp yet stable cutting edge contributes to a clean finish at typical cutting parameters for mid‑range turning. Overall, the insert helps to shorten cycle times and maintain consistent workpiece quality, which benefits production runs and subcontract machining where repeatability is crucial. Suitable applications and selection advice Intended primarily for turning applications, the insert is best applied where material conditions vary and operators need a universal grade for dependable performance. The PVD-coated AH6225 is particularly suited to stainless steel, delivering stable cutting behaviour under variable feeds and speeds. For optimal results, select the chipbreaker and specific holder combination according to workpiece stability and the desired surface finish; this measured approach minimises tool wear and supports efficient material removal. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy inserts and to confirm stock and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947660 Manufacturer SKU: TUN6947660 Model series: ISO‑turning inserts Designation: CCMT09T308 AH6225 Tungaloy insert Dimensions & core data Size designation: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 7° Materials & features Material: Carbide Coating / grade: PVD‑coated AH6225 Shape: Rhombic (CCMT) Hole type: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: Turning (external and internal) FAQ Which materials is this insert suited for? The CCMT09T308 AH6225 insert is optimised for machining stainless steel and performs well in varied turning conditions thanks to the PVD‑coated AH6225 grade. How is the insert mounted in a toolholder? The insert uses a standard CCMT mounting with a cylindrical hole and one‑sided countersink; matching holder form, relief angle and tolerance class is required for correct assembly of the Tungaloy insert (SKU TUN6947660). What cutting geometry helps with surface finish? The rhombic CCMT shape with an 80° included angle and a 0.8 mm corner radius provides a stable cutting edge that contributes to good surface quality during medium‑duty turning. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning operations when paired with an appropriate holder and consideration for workpiece stability. What are the main benefits of the AH6225 grade? The PVD‑coated AH6225 grade delivers a sharp yet robust cutting edge, improved heat resistance and reliable chip control, which together reduce interruptions and support consistent production results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Reliable, sharp cutting from a PVD‑coated carbide grade with a 0.8 mm corner radius delivers stable mid‑range performance for stainless‑steel turning; combined with the ISO CCMT geometry and secure cylindrical‑hole clamping, setup and repeatability are improved. Order the CCMT09T308 AH6225 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308 AH6225 Tungaloy indexable insert for turning — PVD‑coated carbide, 0.8 mm radius CCMT09T308 AH6225 Tungaloy indexable insert designed for ISO‑standard external and internal turning, offering a sharp yet stable cutting edge for stainless‑steel machining in varied conditions PVD‑coated carbide for stainless steels 80° rhombic CCMT geometry 0.8 mm corner radius for precision finishing Cylindrical hole with single‑sided countersink Consistent cutting performance for stainless steels The CCMT09T308 AH6225 insert is a PVD‑coated carbide grade developed as a universal choice for stainless steels, optimised to deliver a sharp, stable cutting edge under changing conditions. The AH6225 grade balances wear resistance and toughness, which reduces edge chipping while retaining cutting efficiency during medium cutting depths. For production environments requiring predictable tool life and consistent surface quality, this grade provides measurable improvements in process stability and reduces unexpected downtime. Fast, reliable clamping and straightforward tool matching Engineered to the ISO CCMT form, the rhombic plate and cylindrical hole with single‑sided countersink ensure reliable mechanical clamping in compatible holders. Compatibility is governed by plate shape, 7° clearance angle, tolerance class, fastening geometry, size and 3.97 mm plate thickness, so selection of the correct outer holder or boring bar is decisive. The standardised interface helps shorten setup times and secures repeatable position accuracy for serial production and frequent index changes. Improved surface finish and controlled chip formation With an 80° approach angle and a 0.8 mm corner radius, the insert supports fine finishing passes while maintaining load distribution across the edge. The integrated single‑sided chipbreaker promotes predictable chip shapes and evacuation, decreasing rework and protecting workpiece finish. In combination, these features deliver a reliable surface quality on both external and internal turning operations and help meet tighter dimensional tolerances with fewer tool interventions. Practical system design and application guidance As part of a complete turning system — ISO insert, matching external holder or boring bar, support shim/clamping set and replacement screws — this plate integrates seamlessly into established tool setups. The universal AH6225 grade is suitable for varied cutting strategies: choose the chipbreaker and insert geometry according to workpiece stability and machining depth. For workshop planners and process engineers, the predictable behaviour of this insert simplifies tool inventory decisions and supports efficient production planning. For precision stainless‑steel turning with Tungaloy PVD‑coated carbide, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6796245 SKU: 6796245-Tungaloy Manufacturer SKU: TUN6796245 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Grade: AH6225 Facts Corner radius: 0.8 mm Approach angle: 80° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 09 Special features ISO designation: CCMT09T308 Plate form: rhombic Coating: PVD Chipbreaker: single‑sided Hole: cylindrical hole + one‑sided countersink (40°–60°) Application: Turning (external and internal) Schneidstofftyp: PVD‑coated carbide FAQ Which materials is this insert best suited for? The CCMT09T308 AH6225 Tungaloy insert is primarily designed for stainless steels, offering a balanced wear resistance and toughness for medium cutting conditions; it performs well where a sharp but stable edge is required. Can this plate be used for internal turning and grooving? Yes — the rhombic CCMT geometry and the single‑sided chipbreaker make the plate suitable for both external and internal turning tasks when paired with an appropriate boring bar or holder. How does the AH6225 grade influence tool life? The AH6225 grade, with its PVD coating, provides improved wear resistance under varying cutting conditions, which supports longer tool life and consistent component quality across production batches. What should be considered when selecting a holder? Holder compatibility depends on plate form, 7° clearance angle, tolerance class, fastening style, plate size and thickness; using a holder specified for CCMT‑type inserts ensures secure clamping and positional repeatability. How does the chipbreaker affect machining? The single‑sided chipbreaker is designed to produce manageable chip shapes and facilitate evacuation, improving surface finish and reducing the risk of rework in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Reliable PVD‑coated carbide grade AH6225 for stainless steels combined with the CCMT geometry and a 0.8 mm corner radius delivers a durable, sharp cutting edge and consistent chip control; benefiting medium‑duty turning cycles and predictable tool life. Order the CCMT09T308 AH6225 Tungaloy indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T308 AH6225 Tungaloy – ISO indexable turning insert for turning, PVD‑coated carbide, 0.8 mm corner radius The CCMT09T308 AH6225 Tungaloy is an ISO‑standard indexable insert designed for external and internal turning of stainless steels, engineered to maintain a stable cutting edge under changing conditions. ISO‑standard rhombic insert, size 09 PVD‑coated carbide grade AH6225 0.8 mm corner radius for edge strength Cylindrical hole with 40°–60° countersink Consistent performance for stainless steel turning The combination of a PVD coating and the AH6225 grade offers a balance between wear resistance and toughness, which is particularly advantageous when machining stainless steels. The coating reduces built‑up edge tendency and improves sliding properties at the chip‑tool interface, while the carbide substrate keeps the cutting edge stable under medium cutting forces. For process planners, this means fewer tool changes and more predictable component quality, translating into higher machine uptime and consistent surface finishes. Geometry and mounting that reduce variability The CCMT geometry (rhombic insert, size 09) with an 80° approach angle, 0.8 mm corner radius and 7° relief provides a controlled engagement and favourable force distribution at the tool tip. The insert thickness of 3.97 mm and the included cylindrical hole with a one‑sided countersink (40°–60°) ensure secure clamping in ISO holders; correct seating is defined by form, clearance angle, tolerance class and fixing method. The single‑sided chipbreaker supports consistent chip formation in turning operations, reducing risk of chatter and improving surface integrity. System advantages and production benefits Used as part of a matched system—insert, external holder or boring bar, shim and clamp—the indexable solution simplifies tool management and replacement. The universal nature of the AH6225 grade makes it suitable across a broad range of stainless alloys, minimising the number of tool types required in inventory. Process engineers will value the predictable tool life and steady cutting behaviour, which aid cycle time planning and reduce rework. Selecting the correct chipbreaker and maintaining a rigid setup are key to unlocking these efficiency gains. Practical selection and setup guidance When specifying the insert, consider the workpiece alloy and machining stability: tighter rigs and higher feed rates benefit from larger radii, while fine finishing calls for smaller corner radii. The PVD coating refers to a thin, durable layer applied in a vacuum process to enhance wear resistance; the corner radius affects both edge strength and surface finish. For the CCMT09T308 AH6225 variant, pairing with a compatible ISO holder and using the recommended clamping hardware ensures repeatable positioning and safe cutting conditions. For unfamiliar applications, testing with conservative feeds and speeds will confirm suitability before full production. For optimal performance in stainless steel turning, contact Metav Werkzeuge for application advice and to order the Tungaloy CCMT09T308 AH6225 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829017 SKU: 6829017-Tungaloy Manufacturer SKU: TUN6829017 Model series: ISO‑turning indexable inserts Core specifications Corner radius: 0.8 mm Relief angle: 7° Insert angle: 80° Thickness: 3.97 mm Insert size: 09 Materials & features Material: carbide Grade/coating: AH6225 (PVD‑coated carbide) Shape: rhombic (CCMT) Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning Compatibility note: ISO‑standard insert; check holder form, clearance and size FAQ What materials is this insert best suited for? The CCMT09T308 AH6225 is optimised for stainless steels, combining a PVD coating with a carbide substrate to limit built‑up edge and provide reliable edge strength during medium‑duty turning. Can this insert be used for both external and internal turning? Yes, the rhombic CCMT shape and the single‑sided chipbreaker make this insert suitable for both external and internal turning operations when paired with the correct holder. How should the insert be clamped to ensure repeatability? Secure clamping using the matching ISO holder, appropriate shim and the specified fixing screw is required; the CCMT09T308’s cylindrical hole and countersink ensure positive seating and repeatable positioning. What does the AH6225 designation mean in practice? AH6225 denotes a PVD‑coated carbide grade tuned for a balance of toughness and wear resistance, offering a wide material coverage and stable chip formation for stainless steels. Are there recommended cutting conditions for initial testing? Begin with conservative feeds and moderate cutting speeds to validate the stability of the setup; once confirmed, feeds and speeds can be increased within the machine and workpiece limits to exploit the insert’s performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide grade tuned for stainless steels and an ISO‑standard rhombic geometry to secure consistent cutting performance and surface quality; the sharp yet stable cutting edge and a 0.8 mm nose radius support reliable mid‑range turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T308 AH6225 — Indexable Turning Insert (ISO), PVD‑coated Carbide by Tungaloy The CCMT09T308 AH6225 is an ISO‑standard indexable insert for turning, designed for medium cutting of stainless steels with a balanced combination of sharpness and edge stability. ISO‑standard rhombic insert PVD‑coated carbide AH6225 For stainless steels and mixed conditions 80° geometry with 0.8 mm radius Consistent machining for stainless steels and mixed batches The combination of a PVD‑coated surface and a carbide substrate in grade AH6225 delivers a balance between wear resistance and cutting-edge sharpness, especially for stainless steels. This results in fewer interruptions for insert changes and a steadier surface finish during medium turning tasks. In practice, the coating reduces adhesive wear and improves heat resistance under variable cutting temperatures, while the substrate preserves a reliable cutting edge under intermittent loading. Such properties translate into improved process stability and can reduce total machining time for serial production and small-batch operations alike. ISO conformity and secure fit for a wide range of holders Built to the ISO dimensions specified by the CCMT 09T308 designation, this rhombic insert provides compatibility with holders defined by form, clearance angle, tolerance class, fastening and thickness. The 80° geometry and 7° clearance combine to give a robust cutting angle suitable for external and internal turning, while the cylindrical hole with single‑side countersink (40°–60°) ensures reliable clamping in standard clamp or screw systems. Correct matching of insert and holder reduces chatter and enables predictable repeatability across setups, simplifying tooling logistics on the shop floor. Process advantages: chip control and tool life The insert features a single‑sided chipbreaker tailored to medium turning operations; this aids controlled chip formation when machining ductile alloys such as stainless steels and helps protect the cutting edge during chip evacuation. The 0.8 mm nose radius provides a compromise between strength and surface finish, suitable for finishing passes or light to medium roughing where contour accuracy matters. Together, these design choices support longer effective tool life, fewer interventions and a more economical production flow — particularly valuable in high‑mix, low‑volume environments. Practical recommendations for reliable results Use the insert in a complete system consisting of a compatible ISO holder, clamping set and replacement screws to maintain repeatable clamping forces. Match the chipbreaker and grade AH6225 to the specific alloy and cutting parameters: slightly reduced cutting speeds and steady feed rates help when machining highly work‑hardening stainless grades. The ISO form and robust edge make the insert suited to both external and internal turning tasks; for unusual geometries or severe interrupted cuts, consider a more stable clamping arrangement or an alternative chip‑control geometry. Contact Metav Werkzeuge for individual application advice on the CCMT09T308 AH6225 indexable insert, compatibility checks with existing holders and recommendations for cutting data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829228 Manufacturer SKU: TUN6829228 Model series: ISO‑turning indexable inserts Facts Insert designation: CCMT09T308 Grade/coating: AH6225, PVD‑coated Material: carbide Nose radius: 0.8 mm Plate thickness: 3.97 mm Geometry angle: 80° Clearance angle: 7° Hole: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Special features Rhombic plate form (09 size) ISO standard compliance Designed for turning (external and internal) Suited for stainless steels and mixed conditions Balanced sharp and stable cutting edge System use with holder, underlay/clamp and screws FAQ What materials is this insert intended for? The CCMT09T308 AH6225 indexable insert is optimised for stainless steels and performs well across mixed material batches where a sharp, stable cutting edge is required. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and plate thickness; the CCMT09T308 follows ISO dimensions to simplify matching. What is the advantage of the AH6225 grade? The AH6225 PVD‑coated carbide grade provides a compromise between heat and wear resistance and a sharp edge, enhancing performance during medium turning operations. Is the nose radius suitable for finishing? The 0.8 mm nose radius offers a good balance between strength and surface finish and is suitable for finishing passes as well as light to medium roughing. Does the insert include a chipbreaker? Yes, the insert has a single‑sided chipbreaker designed for controlled chip formation in medium turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com