CNGG 120408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 grade, uncoated carbide cutting edge and an 80° rhombic geometry for efficient external and internal turning; order original inserts directly via Metav Werkzeuge or consult the specialists if holder compatibility needs checking. CNGG 120408 TH10 — Tungaloy CNGG120408 turning insert, rhombic 80° The CNGG120408 TH10 is an ISO‑standard rhombic indexable insert for precision turning, designed for applications in which low cutting forces and clean surface finishes are required. Sharp TH10 universal grade for low cutting forces Uncoated carbide for clean surface finish 80° rhombic geometry for versatile turning Double-sided chipbreaker, cylindrical hole Greater productivity with lower cutting forces The insert is manufactured from uncoated carbide, the main advantage being a sharp cutting edge that reduces the energy required for material removal. As a result, tool load is lowered and feed rates can be maintained in many non‑ferrous and soft material operations. The TH10 grade is a universal, sharp‑edged formulation that supports stable cutting when a clean surface is the priority; the ISO conformity ensures predictable performance across standard indexable turning systems. Compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness, which are specified so that selection and set‑up are straightforward. Reliable chip control and secure clamping for consistent results A double‑sided chipbreaker combined with a cylindrical hole provides repeatable chip formation and a secure seat in the holder, reducing vibration and preserving surface integrity. The 80° rhombic geometry offers a balance between strength and access to profile detail, while the 0.8 mm corner radius moderates transition zones to avoid sudden load peaks; this yields a reliable surface finish without excessive tool wear. Where higher stability is needed, holders with matching seat geometry and clamping elements should be chosen to make the most of the insert’s design. System compatibility and practical benefits for everyday machining Supplied as part of the ISO indexable turning insert family, this plate integrates into a system comprising an external holder or boring bar, a support pad or clamping set and replacement screws. The combination of ISO standardisation, robust carbide substrate and a sharp cutting edge supports short set‑up times and predictable replacement cycles. For shops focused on process repeatability, the insert’s geometry and grade offer a practical compromise between tool life and surface quality, enabling consistent component tolerances with fewer trial cuts. For application advice, holder compatibility checks or to secure original Tungaloy inserts such as the CNGG120408 TH10, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our technical consultants provide tailored recommendations. Technical data Article number: 6801876 Manufacturer SKU: TUN6801876 Stock SKU: 6801876-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Special features Material: cemented carbide Grade: TH10 Coating: none (uncoated) Plate shape: rhombic Hole: with hole (cylindrical hole) Chipbreaker: double-sided Application: turning FAQ What materials is this insert best suited for? The TH10 grade uncoated carbide insert is optimised for non‑ferrous materials and applications where a sharp cutting edge and clean surface finish are priorities; it performs well in aluminium and similar alloys. How does the 80° rhombic geometry affect turning operations? An 80° rhombic geometry provides a robust cutting edge for general turning while allowing access for external and internal profiles, offering a compromise between strength and manoeuvrability. Is the insert reversible or single‑use? The double‑sided design allows reversal once one edge is worn, extending the service life before disposal or reconditioning of the plate. Which holders are compatible with this insert? Compatibility depends on the holder’s seat form, clearance angle, tolerance class, fastening method, size and plate thickness; holders specified for ISO CNGG inserts with matching dimensions are suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120408 TH10 Wendeplatten - Tungaloy
Benefit from a combination of precise geometry, low cutting forces and broad material applicability for efficient turning operations; order the inserts directly via Metav Werkzeuge or contact our consultants for application advice. CNGG120408 TH10 CNGG – Indexable turning insert, 0° clearance, rhombic, Tungaloy The CNGG120408 TH10 indexable insert for turning provides a sharp, uncoated carbide edge optimised for non-ferrous metals and applications requiring low cutting forces and clean surfaces. ISO‑compliant rhombic insert design Sharp uncoated carbide edge for low cutting forces Double‑sided chipbreaker for extended use Compatibility with standard ISO holders and mounting Precise geometry for dependable ISO‑compliant performance The rhombic insert geometry and ISO designation ensure consistent fitment in standard holders; compatibility depends on form, relief angle, tolerance class, fastening and thickness rather than proprietary dimensions. The CNGG120408 family follows ISO norms for turning inserts, which simplifies tool selection and reduces set‑up time. With a defined approach angle of 80° and a nominal clearance of 0°, the geometry supports stable outer and inner turning where controlled chip flow and predictable contact conditions are required. Sharp uncoated grade for low cutting forces and clean finishes The uncoated carbide grade TH10 is a sharp, universal grade intended for non‑ferrous materials and operations where a clean cutting edge reduces built‑up edge and surface distortion. An uncoated cutting edge lowers friction in many alloys, producing lower cutting forces and improved surface integrity without relying on coating lubricity. The insert features a double‑sided chipbreaker, which helps to control chip form and contributes to consistent surface finish and reduced cycle time in serial production. Practical benefits: cost‑efficient use and system flexibility Using a reversible, double‑sided insert reduces tooling cost per edge and allows quick indexation for renewed cutting conditions. The plate thickness of 4.76 mm, the 0.8 mm corner radius and the 12 mm plate size balance edge strength with accessibility in tight turning operations. Where stability is limited, select the appropriate chipbreaker and grade to match workpiece material and feed; the ISO format makes it straightforward to find compatible external holders or boring bars and to replace only the insert when worn rather than the complete tool body. For tailored application support or to procure Tungaloy CNGG120408 TH10 inserts directly through Metav Werkzeuge, contact our technical team via info@metav-werkzeuge.com or call +49 2822 7131930 and request the specialist advice you need. Technical data Article number: 6801872 Manufacturer SKU: TUN6801872 SKU: 6801872-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Insert designation: CNGG120408 Plate form: rhombic Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Approach angle: 80° Hole: with cylindrical hole Special features Grade: TH10 (uncoated carbide) Chipbreaker: double‑sided Typical application: external and internal turning System components: insert, matching external holder or boring bar, shim/clamp set, replacement screws FAQ What materials are best suited to this insert? The CNGG120408 TH10 insert is optimised for non‑ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and clean surface results. How does the TH10 grade perform compared with coated grades? TH10 is an uncoated carbide grade that delivers lower cutting forces and reduced built‑up edge on many alloys; coated grades can offer wear resistance at the expense of initial edge sharpness. Can this insert be used for both external and internal turning? Yes, the ISO rhombic form and the hole for secure clamping make the insert suitable for both external and internal turning when paired with the correct holder. What are the key dimensional references for holder selection? Use the ISO designation CNGG120408, plate thickness 4.76 mm, plate size 12 mm and corner radius 0.8 mm to select a compatible holder and clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120404 LX10 Wendeplatten - Tungaloy
Benefit from the combination of LX10 wear resistance, a 0.4 mm corner radius and ISO CNGN geometry for consistent, productive turning; order via Metav Werkzeuge or consult our specialists for detailed application support. CNGN120404 LX10 Turning Insert for Turning — 0.4 mm radius, 80° | Tungaloy A CNGN120404 LX10 ISO turning insert designed for reliable external and internal turning in general machining applications. ISO CNGN geometry for standard holders LX10 grade: balanced wear resistance 0.4 mm corner radius for fine finishing 0° clearance angle for positive cutting Consistent cutting performance and holder compatibility The rhombic ISO insert delivers a predictable cutting action through its standardised form and dimensions. The CNGN geometry and ISO designation ensure compatibility with matching external holders and boring bars, while the defined tolerances govern clamping and fit. With a 4.76 mm plate thickness and an included angle of 80°, the rhombic plate provides a stable cutting edge, reducing vibration and contributing to repeatable part quality. Selecting the correct chipbreaker and grade in line with workpiece stability and machining strategy helps to convert this physical stability into consistent cycle times and lower scrap rates. What the LX10 grade and carbide construction contribute The insert is made from carbide and specified in the LX10 Tungaloy grade, which balances wear resistance with sufficient toughness to resist edge chipping. This combination supports longer tool life under varied cutting conditions and helps maintain dimensional accuracy over extended runs. In practical terms, the grade reduces the frequency of index changes and re-grinding operations, improving uptime and lowering handling costs. The absence of an integrated chipbreaker means the geometry is best paired with a chip control solution chosen for the workpiece material and cutting parameters. Practical benefits: edge radius, clearance and application fit A 0.4 mm corner radius delivers a mix of surface finish and edge strength suitable for semi-finishing and finishing passes, while the 0° clearance angle produces a positive cutting geometry that reduces cutting forces in many turning setups. The rhombic plate form with no hole simplifies inventory management for standard clamping systems and broadens usability across external and internal turning tasks. For shops aiming for process reliability, this insert converts geometry and grade into measurable productivity: fewer tool changes, stable surface finishes and predictable wear behaviour. For precision turning with Tungaloy's LX10 grade, contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer item no.: 6851962 Merchant SKU: 6851962-Tungaloy Manufacturer SKU: TUN6851962 Series: ISO turning inserts Application: Turning Facts Insert designation: CNGN120404 ISO code: 120404 Included angle: 80° Corner radius: 0.4 mm Clearance angle: 0° Plate size: 12 mm Plate thickness: 4.76 mm Special features Material: carbide Grade: LX10 (Tungaloy) Plate form: rhombic Hole: none Chipbreaker: none Compatibility: standard CNGN holders FAQ What is the primary use of this insert? The CNGN120404 LX10 Tungaloy turning insert is intended for external and internal turning operations where ISO CNGN geometry and a 0.4 mm corner radius are suitable. How does the LX10 grade affect tool life? The LX10 grade provides a balanced combination of wear resistance and toughness for the carbide substrate, helping the insert maintain edge stability and achieve longer intervals between indexing. Can this insert be used with any CNGN holder? The insert is manufactured to ISO CNGN form and will fit holders that accept CNGN inserts; holder compatibility depends on form, clearance angle, tolerance class, clamping method and thickness. Which cutting tasks suit the 0.4 mm radius and 80° included angle? A 0.4 mm radius suits semi-finishing to finishing passes where a compromise between surface quality and edge strength is required; the 80° included angle supports standard turning geometries. Is a chipbreaker included and how should chip control be handled? This plate has no integrated chipbreaker; chip control should be achieved by selecting a compatible holder or a dedicated chip-control insert variant matched to the workpiece material and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120404 LX11 Wendeplatten - Tungaloy
Take advantage of reliable ISO‑compatibility and the balanced LX11 carbide grade for consistent tool life and process stability; select the matching holder form and clamp set for immediate integration and efficient turning operations with Metav Werkzeuge available for supply and technical advice. CNGN 120404 LX11 Tungaloy turning insert — rhombic 80° geometry The CNGN120404 LX11 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a balanced combination of wear resistance and edge stability for general turning tasks ISO‑standard rhombic insert 80° Tungaloy LX11 carbide grade 0.4 mm corner radius 4.76 mm plate thickness Predictable set‑up thanks to ISO geometry and form fit The ISO designation ensures straightforward integration into a wide range of holders: compatibility is defined by insert form, relief angle, tolerance class, clamping method, size and thickness. With its 80° included angle and standard rhombic shape, the insert provides consistent contact geometry that simplifies fixture selection and reduces setup time. This predictability translates into fewer stoppages and better repeatability in serial turning operations, supporting stable production flows and easier tool inventory management. Balanced cutting performance from the LX11 grade The Tungaloy LX11 grade is formulated to combine wear resistance with sufficient toughness, helping to maintain a stable cutting edge over longer cycles. For turning applications, this balance reduces frequent edge changes and supports consistent surface finish on workpieces. The cemented carbide substrate and grade composition complement the insert geometry, producing reliable performance on varying turning tasks while preserving edge stability under typical industrial cutting conditions. Practical mounting and selection guidance for reliable machining The insert is delivered as an ISO indexable plate and requires a matching external holder or boring bar, plus a support shim or clamp set and replacement screws for the system assembly. Key dimensions—12 mm size, 4.76 mm plate thickness and 0.4 mm corner radius—help determine rigidity and finishing capability. Note that the insert is supplied without hole and without a chipbreaker, so selection of an appropriate holder and machining parameters must reflect the chosen workpiece material and desired chip control. Following these selection rules ensures efficient material removal and a steady tool life. For dependable turning with the Tungaloy LX11 CNGN120404 insert, contact Metav Werkzeuge for tailored application advice and ready supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6801887 SKU: 6801887-Tungaloy Manufacturer SKU: TUN6801887 ISO designation: CNGN120404 Grade: LX11 Manufacturer: Tungaloy Dimensions & geometry Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Relief angle: 0° Hole: without hole Materials & features Material: cemented carbide Application: turning Chipbreaker: without Plate shape: rhombic System: ISO indexable turning inserts FAQ What holders are compatible with this insert? Compatibility is determined by the ISO form and dimensions; the CNGN120404 LX11 insert fits holders specified for CNGN‑form indexable turning inserts and must match the form, tolerance and clamping method. Is this insert suitable for internal as well as external turning? Yes, the geometry and grade are intended for both external and internal turning tasks when used with an appropriate external holder or boring bar. What are the main benefits of the LX11 grade? The LX11 grade provides a balanced combination of wear resistance and toughness, giving the insert good edge stability and prolonged cutting life in general turning applications. Does this insert include a chipbreaker or mounting hole? The insert is supplied without a chipbreaker and without a hole, so chip control depends on holder selection and machining parameters. How does the 0.4 mm corner radius affect performance? The 0.4 mm corner radius improves edge strength and provides a compromise between finish quality and robustness, suitable for a range of finishing and light roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120408 FX105 Wendeplatten - Tungaloy
Benefit from ISO conformity, the FX105 Tungaloy carbide grade and a stable rhombic geometry for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CNGN 120408 FX105 indexable turning insert by Tungaloy — ISO CNGN geometry, carbide grade FX105 CNGN 120408 FX105 is an ISO‑format indexable insert designed for external and internal turning applications, offering a balanced combination of wear resistance and edge stability for a wide range of steel and alloy machining tasks ISO‑standard geometry CNGN FX105 carbide grade for wear resistance 0° rake with 80° cutting angle Rhombic insert, 12 mm size, 0.8 mm radius Precision and process reliability for consistent turning The ISO‑standard geometry ensures predictable seating and clamping in compatible holders, resulting in repeatable cutting conditions and reduced setup time. The insert is manufactured from carbide and specified as FX105, a Tungaloy formulation developed to combine wear resistance with adequate toughness; this balance reduces flank wear without compromising edge security during interrupted cuts. For production environments where stable tool life and constant surface finish matter, the standardised form and defined tolerances support process stability and make tool changeovers straightforward. The ISO designation also helps with inventory management and holder compatibility checks. Optimised wear resistance that extends productive cutting time The cutting edge properties of the FX105 grade are geared towards steady abrasion resistance while maintaining chipping resistance under moderate forces. With a nominal corner radius of 0.8 mm and a 0° rake, the insert delivers a controlled chip formation and predictable cutting forces, which often translates into longer cumulative cutting time and fewer tool indexings. In practice, this means less unscheduled downtime and improved economy per machined part. When combined with appropriate cutting parameters and a suitable holder, the insert supports efficient material removal while helping to preserve workpiece integrity. Compatibility considerations and secure clamping guidance Compatibility with a toolholder is determined by insert shape, free angle, tolerance class, fastening type, size and thickness; the rhombic CNGN form and ISO designation simplify selection of matching clamping systems. This indexable insert is supplied without a central hole and without an integrated chipbreaker, so choose a holder that provides the required support and clamping method for the application. The specified insert size 12 mm and insert thickness 4.76 mm are typical for medium‑duty turning; attention to holder seat geometry and screw torque will ensure the correct contact and repeatability during serial production. Practical applications and machining advice Optimised for general turning, the insert is suitable for both external and internal operations where a robust cutting edge is required. The combination of the 80° cutting angle and rhombic geometry offers a compromise between strength and accessibility in shoulder and profile turning. Select feeds and speeds according to workpiece material, and pair the insert with a holder that matches the ISO CNGN footprint. For materials with higher tensile strength or interrupted cuts, consider more conservative cutting parameters to exploit the grade’s toughness. Where surface finish is critical, small adjustments to feed and depth of cut will often yield rapid improvements without sacrificing tool life. For tailored application advice, availability and ordering of the Tungaloy FX105 CNGN 120408 insert (SKU TUN6801888), please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6801888 Manufacturer SKU: TUN6801888 Part name: CNGN120408 FX105 Tungaloy indexable insert Brand: Tungaloy Material: carbide Core specifications Corner radius: 0.8 mm Insert size: 12 mm Insert thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Features & compatibility ISO‑compliant rhombic geometry CNGN No central hole No chipbreaker Carbide grade FX105 by Tungaloy Suitable for external and internal turning Compatibility determined by holder form, free angle, tolerance, fastening, size and thickness FAQ What materials can this insert machine effectively? The Tungaloy FX105 grade indexable insert is formulated for general turning and performs well on a broad range of steels and alloyed materials; selection of cutting parameters should match the workpiece material for optimal results. Is a chipbreaker included with this insert? No, this CNGN insert is supplied without a chipbreaker; machining behaviour relies on the chosen grade, geometry and the holder configuration. How is the CNGN 120408 located and clamped in the holder? The ISO‑standard CNGN geometry seats in compatible holders by shape and size; secure clamping depends on the holder’s seat design, fastening method and correct torque settings. Can the insert be used for internal turning as well as external? Yes, the rhombic shape and 80° cutting angle permit both external and internal turning operations; appropriate holder selection is required for internal machining access. Where can stock and technical advice be obtained? Availability and application guidance for the Tungaloy CNGN120408 FX105 insert (SKU TUN6801888) are provided by Metav Werkzeuge; contact details are supplied above for enquiries and ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120408 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of LX10 wear resistance, carbide substrate and ISO-standard geometry for stable, productive turning operations; order the insert directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. CNGN 120408 LX10 Carbide Indexable Turning Insert — Tungaloy The CNGN120408 LX10 is an ISO-standard rhombic indexable insert designed for external and internal turning in general turning applications. ISO-standard CNGN geometry for universal holders LX10 Tungaloy grade for wear resistance Carbide substrate for durable cutting edges 80° rhombic shape with 0° clearance angle Consistent cutting performance through grade and substrate The combination of a carbide substrate with the LX10 Tungaloy grade provides a balance of wear resistance and edge stability that supports longer tool life in repetitive turning tasks. The grade is designed to resist abrasive wear while retaining sufficient toughness to avoid premature chipping under variable cutting conditions. For shop environments where repeatability and reduced regrinding are priorities, this translates into fewer tool changes and improved machine uptime. The insert’s robustness is particularly beneficial when machining operations require sustained metal removal rates or intermittent cuts. Reliable fit and secure clamping for flexible tool set-ups Designed to the ISO-standard CNGN geometry, the insert ensures compatibility with a wide range of external holders and boring bars when form, clearance angle, tolerance class, fastening and thickness are matched. The 80° included angle and rhombic profile allow both profiling and light shoulder work, while the 0° clearance angle simplifies orientation in many standard holders. Correct matching of holder seat and clamping components is essential: because compatibility depends on multiple dimensional and tolerance criteria, the standardised geometry reduces set-up time and helps maintain consistent cutting positions across different machines. Practical advantages for turning operations and selection guidance For turning tasks, the absence of a dedicated chipbreaker means the insert is intended for applications where the chip formation strategy is determined by the selected grade and process parameters; choose a matching chip control solution and cutting data according to workpiece material and stability. The insert’s 4.76 mm thickness and 12 mm size combined with a 0.8 mm corner radius give a compromise between edge strength and accessibility for finishing passes. As an ISO-series indexable plate from Tungaloy, it supports productive machining when paired with appropriate holders and process settings, offering predictable results and straightforward integration into existing tooling systems. For supply or application advice on the Tungaloy LX10 CNGN120408 insert, contact Metav Werkzeuge for technical consultation and prompt delivery at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6851966 Manufacturer SKU: TUN6851966 SKU: 6851966-Tungaloy Manufacturer: Tungaloy Material: Carbide Facts Geometry designation: CNGN120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Hole style: without hole Special features ISO-series indexable turning insert Rhombic plate form LX10 Tungaloy grade No chipbreaker Intended application: turning Compatibility determined by form, clearance, tolerance, fastening, size, thickness FAQ What is the primary application for this insert? The CNGN120408 LX10 Tungaloy indexable insert is intended for external and internal turning operations and suits a range of general turning tasks when paired with a compatible holder. How does the LX10 grade influence tool life? The LX10 grade used in the Tungaloy insert provides a combination of wear resistance and toughness that improves edge stability and extends service intervals compared with unoptimised grades. Which dimensions and geometry should be checked for holder compatibility? Check the CNGN geometry designation, plate size (12 mm), thickness (4.76 mm), corner radius (0.8 mm), clearance angle (0°) and fastening configuration to ensure correct fit and clamping. Is a chipbreaker integrated in this insert? The CNGN120408 LX10 insert is supplied without a chipbreaker; chip control should be achieved via process parameter selection or an alternative chip control solution suited to the machining task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120408 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of consistent edge life, ISO‑compliant geometry and robust tungsten carbide for reliable turning operations; order the insert via Metav Werkzeuge or contact our consultants for application guidance. CNGN 120408 LX11 ISO indexable turning insert, rhombic 80° form — Tungaloy CNGN 120408 LX11 is an ISO‑standard indexable insert designed for general turning applications, offering a balanced combination of wear resistance and cutting‑edge stability for external and internal turning. ISO‑standard geometry Tungaloy LX11 grade Rhombic 80° form 0.8 mm corner radius Greater productivity through a wear‑resistant grade The LX11 grade, implemented in a tungsten carbide substrate, is engineered to balance wear resistance and toughness, reducing edge chipping during intermittent cuts. By choosing a grade that complements the insert geometry, process windows widen and tool changes become less frequent, which directly improves machine uptime. The ISO‑standard design ensures predictable seating and clamping in established toolholders, simplifying tool life management and stock control. Precision fit and predictable machining behaviour Compatibility with the toolholder is defined by form, clearance angle, tolerance class, fastening, size and thickness; the rhombic shape with an 80° approach angle and 0° clearance delivers stable cutting forces for facing and turning operations. The insert's 4.76 mm thickness and 12 mm size provide rigidity in the tool assembly, while the specification of no hole and no chipbreaker calls for matching holder and clamping components. Clear dimensional standards enable simple qualification in production environments, lowering setup time and variation. Stable cutting edge and defined surface outcomes A 0.8 mm corner radius offers a compromise between edge strength and surface finish: it resists edge breakdown on heavier passes while still permitting good surface quality on finishing cuts. The absence of an integral chipbreaker means chip control must be planned through toolpath, cutting parameters or matching clamping accessories; this flexibility allows the insert to be tailored to diverse applications. The result is repeatable component quality and a stable cutting process that supports efficient production. Contact Metav Werkzeuge to verify holder compatibility and to secure the CNGN 120408 LX11 from Tungaloy — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6801889 Manufacturer SKU: TUN6801889 SKU: 6801889-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: 120408 Shape: rhombic, 80° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 12 mm Clearance angle: 0° Hole: without hole Special features Grade: LX11 (Tungaloy) Material: tungsten carbide Intended use: turning Chipbreaker: without FAQ What turning tasks is this insert suitable for? This insert, the CNGN 120408 LX11 from Tungaloy, is intended for external and internal turning where a balanced combination of wear resistance and toughness is required. How does the corner radius affect component finish? A 0.8 mm corner radius on the CNGN 120408 LX11 increases edge strength for heavier cuts while still allowing acceptable surface finish on finishing operations. Is the insert compatible with standard ISO toolholders? The CNGN 120408 LX11 follows ISO geometry; compatibility depends on matching form, clearance, tolerance class, fastening, size and thickness to the chosen holder. Does this insert include a chipbreaker? The CNGN 120408 LX11 is supplied without a chipbreaker; chip control is achieved via machining parameters, holder design or additional chip‑control elements. Which material is the cutting material made from? The insert is manufactured from tungsten carbide, providing a combination of wear resistance and edge toughness suitable for general turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120408 TS300 Wendeplatten - Tungaloy
High wear resistance and consistent edge stability, together with ISO compatibility and a compact 12 mm size, ensure dependable performance for turning operations; order the CNGN120408 TS300 insert directly via Metav Werkzeuge or ask our consultants if needed. CNGN 120408 TS300 ISO turning indexable insert for external and internal turning — Tungaloy A robust CNGN120408 TS300 indexable insert engineered for general turning applications, designed to fit ISO-compatible holders and deliver predictable machining results. ISO‑compliant CNGN geometry for standard holders TS300 Tungaloy grade for wear resistance Rhombic 80° form, 12 mm inscribed circle 0.8 mm corner radius for fine finishing Seamless integration with ISO tool systems for reliable workflows The insert has been developed for the ISO model series and is intended to integrate easily into established turning tool systems. Compatibility is defined by shape, relief angle, tolerance class, clamping method, size and thickness, which allows planners to select holders and clamping sets with predictability. With an inscribed circle of 12 mm and a thickness of 4.76 mm, the insert fits common small‑to‑medium modular holders, reducing setup time and simplifying inventory. The standardised form keeps process variability low and helps maintain a steady production flow. Optimised grade and substrate for extended tool life and edge stability The TS300 cutting grade from Tungaloy combines a hard substrate with a formulation designed to favour wear resistance while retaining sufficient toughness for turning operations. Manufactured from cemented carbide, the grade aims to balance flank wear and chipping resistance so that cutting edges remain stable over longer cycles. The 0.8 mm corner radius supports improved surface finish and controlled cutting forces in finishing passes, whilst the absence of an integrated chipbreaker means the geometry is best matched with workpiece material and stability considerations when selecting machining parameters. Practical shop‑floor benefits: handling, clamping and application scope Designed for both external and internal turning, the rhombic 80° form provides accessibility in shoulder cuts and facing operations while maintaining a secure clamping interface. The insert is supplied without a hole, so it is intended for seat‑clamp or top‑clamp holders compatible with the CNGN form; matching shim/clamp sets and replacement screws should be checked for fit. Because the insert’s 4.76 mm thickness contributes to mechanical rigidity, it supports stable cutting in typical lathe setups and is suited to operations where consistent chip control and repeatable dimensions are required. For tailored application advice and to secure original Tungaloy CNGN120408 TS300 indexable inserts, contact Metav Werkzeuge — Metav Werkzeuge can assist with holder compatibility and supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6182029 SKU: 6182029-Tungaloy Manufacturer SKU: TUN6182029 Name: CNGN120408 TS300 Tungaloy indexable insert Manufacturer: Tungaloy Material: cemented carbide Facts Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° Special features ISO turning insert series Rhombic form, without hole TS300 Tungaloy grade No chipbreaker Intended for external and internal turning Compatibility depends on form, relief, tolerance, clamping, size and thickness FAQ What materials is this insert suitable for? The TS300 grade is formulated for a broad range of turning applications; the CNGN120408 TS300 insert performs well where wear resistance and edge stability are required, with the final suitability depending on workpiece material and cutting conditions. Which holder type is required for a CNGN insert without a hole? A seat‑clamp or top‑clamp holder designed for CNGN geometry is required for the CNGN120408 TS300 insert; ensure the holder matches the relief angle, tolerance class and plate thickness. How does the 0.8 mm corner radius affect surface finish? The 0.8 mm corner radius on the insert promotes improved surface finish during finishing passes by reducing cutting pressure peaks and offering a more robust edge for consistent dimensional results. Is a chipbreaker integrated on this insert? This variant is supplied without a chipbreaker; chip control should be managed via cutting parameters and selection of an appropriate grade or separate chip management strategy. What system components are recommended for using this insert? A complete system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and spare screws; verify mechanical fit before production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120412 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of FX105 carbide grade, a 1.2 mm corner radius and ISO compatibility to ensure stable cutting performance and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNGN 120412 FX105 ISO turning insert, 80° rhombic, by Tungaloy The CNGN120412-T1 FX105 indexable turning insert is an ISO‑format, rhombic 80° plate designed for general external and internal turning operations, offering a balanced combination of wear resistance and edge stability for industrial machining. ISO‑normed rhombic insert 80° FX105 Tungaloy carbide grade 1.2 mm corner radius T1 chipbreaker for stable chips 4.76 mm plate thickness Consistent wear resistance for reliable cycle times The combination of the FX105 carbide grade and the insert geometry delivers a focused balance of wear resistance and toughness, which reduces unexpected tool changes. In practice this translates to fewer interruptions in production and more predictable process planning. The 1.2 mm corner radius increases edge strength for heavier cuts while the rhombic 80° form supports a wide range of turning profiles. Explaining the term: the grade denotes the engineered carbide formulation and coating behaviour that governs hardness, toughness and thermal stability under load. Secure process integration with ISO tooling systems As an ISO indexable turning insert, the plate is compatible with standard holders when matched by form, relief angle, tolerance class, attachment, size and thickness. The zero-degree relief (0° clearance) and the specified plate thickness of 4.76 mm ensure stable clamping and repeatable seating in most commercial external holders and boring bars. This compatibility reduces set‑up time and supports predictable dimensional accuracy across batches, making the solution suitable for job shops and production environments seeking robust, repeatable performance. Predictable chip control and application flexibility The T1 chipbreaker geometry provides controlled chip formation for common turning tasks, improving swarf evacuation and surface finish while lowering the risk of chip-related interruptions. The insert’s carbide construction combined with the chipbreaker choice is intended to complement workpiece material, machining strategy and machine rigidity — select the appropriate chipbreaker and grade for aluminium, steel or harder materials to achieve the intended result. The result is improved throughput and reduced secondary operations. Contact Metav Werkzeuge today for an application review or a tailored quotation on Tungaloy FX105 inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6801890 SKU: 6801890-Tungaloy Manufacturer SKU: TUN6801890 Model series: ISO indexable turning inserts Facts Cutting edge angle: 80° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° Special features Carbide material Grade FX105 (Tungaloy) Chipbreaker T1 Rhombic plate form No hole ISO indexable turning plate FAQ What applications suit this insert best? The CNGN120412-T1 FX105 insert is intended for general external and internal turning; use the FX105 grade and T1 chipbreaker for operations requiring a balance of wear resistance and edge stability. Which materials can be machined with this grade? The FX105 Tungaloy grade complements a broad range of materials; match the grade and chipbreaker to the workpiece to optimise wear behaviour and chip control. How is compatibility with tool holders ensured? Compatibility depends on form, relief angle, tolerance class, attachment method, plate size and thickness; the ISO format of the insert facilitates matching with standard external holders and boring bars. What benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and resistance to chipping under heavier cuts, improving tool life and reducing unscheduled changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120412 LX10 Wendeplatten - Tungaloy
CNGN120412-T1 LX10 Tungaloy‑Wendeplatte zum Drehen CNGN120412-T1 LX10 bietet leistungsfähige Hartmetall‑Sorte für präzises Außen‑ und Innendrehen in Industrieanwendungen CNGN120412-T1 LX10 Tungaloy‑Wendeplatte zum Drehen Rhombische Platte, Plattengröße 12 mm Eckenradius 1,2 mm für universelle Konturen Plattendicke 4,76 mm und Freiwinkel 0° Spanbrecher T1 optimiert Spanform und Oberflächengüte Präzise Leistung und Wirtschaftlichkeit für die Serienbearbeitung Die CNGN120412-T1 LX10 verbindet Hartmetall‑Basis mit der speziell abgestimmten Sorte LX10, um in der Serienzerspanung eine ausgewogene Kombination aus Verschleißfestigkeit und Zähigkeit zu liefern. Durch die gezielte Geometrie und den Spanbrecher T1 reduziert sich die Nachbearbeitung, was die Prozesskosten senkt und die Ausbringung erhöht. Die ISO‑Normierung sorgt für einfache Integration in bestehende Halter‑Systeme und klare Austauschbarkeit. Materialeigenschaften und Vorteile für Anwender Dank des verwendeten Hartmetalls und der Sorte LX10 profitieren Anwender von stabiler Schneidkante und zuverlässig vorhersehbarer Standzeit. Der Eckenradius von 1,2 mm ermöglicht sichere Kantenführung bei Außen‑ und Innendrehen; das Resultat ist eine verbesserte Bauteiloberfläche bei gleichzeitig hoher Zerspanleistung. Für Einsteiger: Ein Spanbrecher T1 sorgt für kurze, kontrollierte Späne und reduziert das Risiko von Späneverwicklungen. Kompatibilität, Einbauhinweise und Einsatzgebiete Die Platte ist als ISO‑Drehwendeschneidplatte ausgeführt; Kompatibilität zum Halter hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die rhombische Form und das Format 12 machen die Platte vielseitig einsetzbar für Außen‑ sowie Innendrehen. Anwender sollten Halter mit passender Nuten‑ und Schraubaufnahme wählen und auf die freigegebene Toleranzklasse achten, um Wiederholgenauigkeit und Stabilität sicherzustellen. Robustheit, Prozesssicherheit und Anwendernutzen Der Einsatz der LX10‑Sorte unterstützt stabile Spanbildung über verschiedene Werkstoffe hinweg, was insbesondere bei Serienfertigung die Stillstandszeiten reduziert. Durch standardisierte Abmessungen und klare ISO‑Bezeichnung lassen sich Werkzeuge schnell austauschen und Werkstück‑Taktzeiten konstant halten. Für Anwender bedeutet das weniger Maschinenstillstand, planbare Werkzeugkosten und bessere Qualität der gefertigten Teile. Empfehlung: Für produktive Außenbearbeitung die Tungaloy‑Sorte LX10 wählen und bei Fragen zur Halterkompatibilität die technische Beratung von Metav Werkzeuge kontaktieren – per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Bezeichnung: CNGN120412-T1 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Hersteller Artikelnummer: 6851967 SKU: 6851967-Tungaloy Fakten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Plattengröße: 12 mm Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: LX10 (verschleißfest/Zähigkeit abgestimmt) Spanbrecher: T1 (optimierte Spanform) Plattenform: rhombisch Loch: ohne Loch Anwendung: Drehen Schneidstofftyp: Tungaloy‑Schneidstoffsorte FAQ Welche Halter passen zur CNGN120412-T1 LX10 Tungaloy‑Wendeplatte? Halter mit passender Aufnahme für rhombische ISO‑Platten der Größe 12, korrektem Freiwinkel 0° und geeigneter Befestigung sind kompatibel; bei Unsicherheit empfiehlt sich ein Abgleich der Halterform mit der ISO‑Bezeichnung CNGN120412-T1 LX10 Tungaloy‑Wendeplatte oder Rückfrage bei der technischen Beratung. Für welche Werkstoffe ist die LX10‑Sorte geeignet? Die LX10‑Sorte ist als Allround‑Schneidstoff konzipiert und deckt eine breite Werkstoffpalette ab; sie bietet eine gute Balance aus Verschleißfestigkeit und Zähigkeit, weshalb die Platte CNGN120412-T1 LX10 Tungaloy‑Wendeplatte besonders für wechselnde Serienaufgaben geeignet ist. Wie beeinflusst der Eckenradius von 1,2 mm das Bearbeitungsergebnis? Ein Eckenradius von 1,2 mm ermöglicht sichere Kantenführung und ist für allgemeingeometrische Konturen geeignet; das führt zu gleichmäßiger Oberflächengüte und verringert Kerbwirkung bei Bauteilkanten. Was bewirkt der Spanbrecher T1 bei der Bearbeitung? Der Spanbrecher T1 formt kurze, kontrollierte Späne und verbessert damit die Spanabfuhr sowie die Oberflächenqualität; bei der CNGN120412-T1 LX10 Tungaloy‑Wendeplatte sorgt dies für stabilere Prozesse und geringeren Reinigungsaufwand. Ist die Platte für Innen‑ und Außenbearbeitung gleichermaßen geeignet? Ja, die ISO‑Auslegung und die rhombische Form erlauben sowohl Außen‑ als auch Innendrehen; die Platte CNGN120412-T1 LX10 Tungaloy‑Wendeplatte eignet sich für beide Einsatzarten, solange der Halter die passende Aufnahme bietet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNGN 120412 LX11 Wendeplatten - Tungaloy
Taking advantage of the combination of ISO-standard geometry, a wear-resistant LX11 carbide grade and a compact 1.2 mm nose radius ensures reliable performance and repeatable surface quality in turning operations; order directly via Metav Werkzeuge or contact their consultants for precise application guidance. CNGN 120412 LX11 CNGN indexable turning insert for turning — Tungaloy CNGN120412-T1 LX11 Tungaloy indexable insert designed for ISO-standardised turning tasks, offering a balanced mix of wear resistance and edge stability for external and internal turning operations. ISO-standard CNGN120412 geometry LX11 carbide grade for wear resistance Nose radius 1.2 mm for versatile finishing Compatible with ISO holders and boring bars Higher process reliability through predictable wear behaviour The indexable insert is manufactured in a carbide grade optimised as LX11, which combines hardness and fracture resistance to extend tool life in mixed cutting conditions. The insert’s chipbreaker T1 aids in controlled chip formation, reducing interruptions due to chip jamming and enabling stable cutting at moderate to high feeds. The ISO-standardised form ensures predictable clamping and repeatable positioning, which contributes to consistent dimensional accuracy across production runs while lowering overall tooling costs through longer intervals between index changes. Clear selection criteria for compatibility and fixture set-up Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the CNGN form and ISO CNGN120412 designation make it straightforward to match with a suitable external holder or boring bar. The insert’s 0° relief angle and 80° approach combine to provide a favourable cutting geometry for external turning, while the rhombic plate form and absence of a mounting hole simplify clamping and reduce potential misalignment. For applications requiring specific surface finishes, the 1.2 mm nose radius balances finishing capability with edge strength. Practical benefits for typical turning applications Intended for turning, the insert supports both external and internal operations and is especially effective where a stable cutting edge and consistent chip control are required. The carbide LX11 grade improves resistance to abrasive wear and thermal softening, while the standardised dimensions facilitate quick tool changes and inventory management. This combination leads to measurable productivity gains: fewer stoppages, more consistent surface quality and reduced rework. For workshop environments seeking economical, repeatable performance, the insert integrates readily into existing ISO tooling systems. For application advice or to secure the CNGN 120412 LX11 insert from Metav Werkzeuge, please contact Metav Werkzeuge for technical consultation and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6801891 Manufacturer SKU: TUN6801891 Designation: CNGN120412-T1 LX11 Model series: ISO turning indexable inserts Material: carbide Facts Nose radius: 1.2 mm Insert size: 12 mm Thickness: 4.76 mm Relief angle: 0° Approach/angle: 80° Chipbreaker: T1 Special features Plate form: rhombic Hole style: without hole Grade: LX11 (Tungaloy carbide grade) Intended application: turning System composition: ISO insert, compatible external holder or boring bar, support/clamping set and replacement screw FAQ What materials can this insert machine effectively? The CNGN 120412 LX11 insert is designed for general turning tasks; its LX11 carbide grade is suitable for a broad range of steels and common engineering materials where a balance of wear resistance and toughness is required. How does the chipbreaker T1 influence performance? The chipbreaker T1 on this insert promotes controlled chip formation during turning, improving process stability and reducing the likelihood of chip-related interruptions in production. Is the insert compatible with standard ISO holders? Yes — the ISO-designated CNGN120412 geometry ensures compatibility with matching ISO external holders and boring bars when form, size, thickness and clamping method correspond. What surface finish can be expected with a 1.2 mm nose radius? A 1.2 mm nose radius offers a compromise between edge strength and finish; it is suitable for producing consistent finishes in general turning while maintaining acceptable tool life under typical cutting parameters. Are replacement screws and clamping accessories required? The system typically comprises the ISO insert, a matching holder or boring bar, support or clamping kit and replacement screws; the insert is designed to work within that ISO tool system framework. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120412 TS200 Wendeplatten - Tungaloy
CNGN 120412 TS200 Wendeplatte zum Drehen von Tungaloy CNGN120412-T1 TS200 Tungaloy-Wendeplatte – ISO-genormte Wendeplatte für Außen- und Innendrehen, ausgelegt auf produktive Zerspanung und stabile Schneidkanten CNGN120412-T1 TS200 Wendeplatte von Tungaloy ISO-genormt für Standardhalter Hartmetall für lange Standzeit Eckenradius 1,2 mm für feine Konturen Freiwinkel 0° und rhombische Form Hartmetall und Schneidstoff für langlebige Fertigung Die Wendeplatte kombiniert Hartmetall mit der Sorte TS200, wodurch Verschleißfestigkeit und Zähigkeit in Balance stehen. Diese Materialkombination sorgt für eine gleichmäßige Standzeit auch bei wechselnden Schnittbedingungen und reduziert Stillstandszeiten in der Fertigung. Anwender profitieren von konstanteren Werkzeugwechselintervallen und planbaren Produktionskosten. Präzision durch Geometrie und Radius Die rhombische Plattenform mit Eckenradius 1,2 mm und Freiwinkel 0° ermöglicht präzise Konturen und ruhigen Spanabfluss bei Außen- und Innendrehen. Die kleine Radiengeometrie unterstützt feine Schnittbilder und reduziert Nachbearbeitung. Dadurch lassen sich enge Toleranzen wirtschaftlich erreichen, was besonders in Serienfertigung und bei anspruchsvollen Oberflächen wichtig ist. ISO-Standardisierung für sichere Halterkompatibilität Als Bestandteil der ISO-Drehwendeschneidplatten ist die Kompatibilität zum Halter über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Das vereinfacht die Auswahl passender Außenhalter oder Bohrstangen und minimiert Werkzeugwechselaufwand. Wer auf standardisierte Systeme setzt, profitiert von einfacher Beschaffung und hoher Austauschbarkeit. Auswahl des Spanbrechers und Einsatzempfehlung Der integrierte Spanbrecher T1 ist für stabile Zerspanung ausgelegt und passt besonders bei mittelstarken Schnittbedingungen. Für variierende Werkstoffe oder andere Bearbeitungsarten empfiehlt sich die Auswahl passender Spanformer und Geometrien, um Oberflächengüte und Werkzeugstandzeit zu optimieren. Die Sorte TS200 unterstützt dabei einen breiten Werkstoffmix durch gute Schneidkantenstabilität. Empfehlung: Für produktive Dreharbeiten die TS200-Sorte von Tungaloy über Metav Werkzeuge nutzen; bei technischen Fragen eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6320955 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: CNGN CNGN120412-T1 TS200 Tungaloy-Wendeplatte Daten Eckenradius: 1,2 mm Plattengröße: 12 mm Plattendicke: 4,76 mm Winkel: 80° Freiwinkel: 0° Hersteller SKU: TUN6320955 Besonderheiten Material: Hartmetall Sorte: TS200 — Verschleißfestigkeit, Zähigkeit Spanbrecher: T1 — stabiler Spanabfluss Plattenform: rhombisch Loch: ohne Loch Anwendung: Drehen Schneidstofftyp: Tungaloy-Schneidstoffsorte FAQ Welche Halter passen zur CNGN120412-T1 TS200 Wendeplatte? Die CNGN120412-T1 TS200 Wendeplatte ist ISO-genormt und passt in Halter, die die entsprechende Form, Größe 12 mm, Dicke 4,76 mm und die Freiwinkelvorgabe erfüllen. Auf diese Weise lässt sich die Kompatibilität zuverlässig prüfen. Für welche Werkstoffe eignet sich die TS200-Sorte? Die TS200-Sorte wurde für eine breite Werkstoffabdeckung entwickelt und bietet ein ausgewogenes Verhältnis aus Verschleißfestigkeit und Zähigkeit, sodass sie sich für typische Stahl- und Gussbearbeitungen sowie Mischanwendungen in der Zerspanung eignet. Welchen Vorteil bringt der Eckenradius 1,2 mm? Der Eckenradius 1,2 mm ermöglicht feinere Konturen und verbesserte Oberflächen bei schmalen Schnittbreiten, wodurch Nachbearbeitung reduziert und Maßhaltigkeit in kritischen Bereichen erhöht wird. Wann ist der Spanbrecher T1 die richtige Wahl? Der Spanbrecher T1 ist ausgelegt für stabile, kontinuierliche Späne bei normalen bis mittleren Schnittbedingungen. Er empfiehlt sich, wenn gleichmäßige Spanformung und Schneidkantenstabilität im Vordergrund stehen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNGN 120412 TS300 Wendeplatten - Tungaloy
Take advantage of the combination of TS300 wear resistance, a 1.2 mm corner radius and ISO‑compatible geometry for reliable, productive turning. Order the insert directly via Metav Werkzeuge or contact our consultants for application support. CNGN120412-T1 TS300 Tungaloy turning insert — rhombic ISO insert for turning CNGN120412-T1 TS300 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning applications, optimised for stable cut performance and reliable tool life. ISO‑standard rhombic insert TS300 grade for wear resistance 1.2 mm corner radius for robustness Chipbreaker T1 for controlled chips High-performance grade for stable machining The TS300 grade combines wear resistance and edge stability on a carbide substrate to prolong cutting intervals and maintain consistent surface finish. As an ISO‑conforming plate, the geometry supports repeatable performance across compatible holders. The material combination and coated grade reduce flank wear and help maintain dimensional accuracy over longer production runs, making it suitable where tool life and process stability are priorities. Precision geometry that simplifies set-up and clamping The rhombic plate with an 80° included angle and 1.2 mm corner radius provides a balance between strength and accessibility in confined turns. The integrated chipbreaker T1 guides swarf flow to avoid long stringy chips, which benefits both automatic and manual turning operations. Compatibility with holders depends on shape, clearance angle, tolerance class, clamping and plate thickness; this ensures selection of an appropriately matched toolholder for optimal cutting conditions. Practical benefits for production and tool management Designed for external and internal turning, the insert forms part of a system comprising a holder, shim/clamping set and replacement screws for straightforward maintenance. Standardisation on this ISO type reduces inventory complexity and simplifies re‑ordering. The combination of a robust corner radius and a wear‑resistant grade translates into fewer interruptions for insert changes and more predictable process windows, supporting higher uptime and more efficient throughput. For robust, productive turning with the TS300 grade, contact Metav Werkzeuge for tailored application advice and delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6182030 Manufacturer SKU: TUN6182030 SKU: 6182030-Tungaloy Model series: ISO‑turning inserts Type designation: CNGN120412‑T1 Core dimensions Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 80° Clearance angle: 0° Materials & features Carbide substrate Grade: TS300 (Tungaloy) Chipbreaker: T1 Shape: Rhombic Hole: without hole Application: Turning (external and internal) Compliance: ISO‑standard insert FAQ What materials is this insert suitable for? The CNGN120412‑T1 TS300 Tungaloy insert is formulated for general turning and delivers good wear resistance across a broad range of materials; selection of the exact chipbreaker and cutting data should match the specific workpiece material. How does the chipbreaker T1 affect machining? The T1 chipbreaker on the TS300 grade promotes short, manageable chips and stabilises cutting forces, which helps maintain consistent surface finish and reduces the risk of chip entanglement. Which holders are compatible with this ISO plate? Compatibility is determined by the holder form, clearance angle, tolerance class, clamping method, plate size and thickness; choosing an ISO‑matched holder ensures correct seating and clamping for reliable performance. Is the insert suitable for finishing passes? With its combination of edge stability and wear resistance, the insert can be used for finishing, provided cutting parameters and holder rigidity are adjusted to achieve the desired surface quality. What inventory identifiers should be used when reordering? Use the manufacturer article number 6182030 or the manufacturer SKU TUN6182030 when reordering to ensure the correct CNGN120412‑T1 TS300 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNGN 120416 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compatibility, durable FX105 grade and a versatile 1.6 mm corner radius for consistent turning performance. Order the insert directly via Metav Werkzeuge or consult our specialists for machining support. CNGN120416 FX105 Tungaloy indexable insert for turning — 1.6 mm corner radius, rhombic 80° CNGN120416 FX105 is an ISO‑standard insert engineered for general external and internal turning applications, combining a robust carbide substrate with a performance‑oriented grade for reliable edge life. ISO‑standard rhombic insert 1.6 mm corner radius for versatility FX105 grade for wear resistance Suitable for external and internal turning Predictable cutting performance and wear resistance The CNGN120416 FX105 indexable insert pairs a carbide substrate with the FX105 cutting grade to provide controlled wear progression and extended edge stability. The 1.6 mm corner radius delivers a balance between strength and surface finish, reducing the risk of chipping on interrupted cuts while maintaining acceptable cutting forces. For operations prioritising repeatability and uptime, the combination of ISO‑standard geometry and a performance grade optimises tool life and minimises unplanned index changes, supporting consistent cycle times in production environments. Reliable holder compatibility and quick setup Compatibility with a toolholder is determined by form, 0° clearance, tolerance class, attachment method, size and thickness; the rhombic shape with an 80° included angle ensures secure seating and predictable load distribution. Using the correct outer holder or boring bar together with an appropriate clamping plate and fastening set reduces set‑up time and avoids misalignment. Clear identification of these parameters simplifies procurement and prevents costly fitment errors, improving first‑time‑right assembly and reducing machine downtime. Flexible application strategy for diverse turning tasks This ISO insert is intended for turning; selection of a chipbreaker and cutting grade should follow the workpiece material, machining strategy and machine stability. The insert’s neutral 0° clearance and medium corner radius suit a wide range of operations from profile finishing to light shoulder cuts. Explainers: a corner radius increases edge strength and affects surface finish, while clearance angle prevents rubbing behind the cutting edge. Choosing the right combination minimises chatter and improves surface quality, so matching the insert to the machining task is a decisive factor for productivity. Operational advantages and serviceability The system setup for this insert typically comprises the ISO indexable insert, an appropriate outer holder or boring bar, an underlay/clamping set and replacement screws, which are straightforward to stock and replace. Replacing a worn insert rather than the entire toolholder reduces tooling cost and waste and speeds up maintenance. The insert’s geometry supports stable chip formation when paired with a suitable chipbreaker and machining parameters, contributing to lower process variability and predictable tool replacement intervals. For availability, technical advice or to secure stock of the CNGN120416 FX105 Tungaloy indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and swift supply. Technical data Article number: 6801892 Manufacturer SKU: TUN6801892 Our SKU: 6801892-Tungaloy Product name: CNGN120416 FX105 Tungaloy indexable insert Model series: ISO indexable turning inserts Facts Corner radius: 1.6 mm Plate size: 12 mm Plate thickness: 4.76 mm Insert designation (ISO): 120416 Included angle: 80° Clearance angle: 0° Special features Material: Carbide Grade: FX105 (Tungaloy) Plate shape: Rhombic Hole: No hole Chipbreaker: None Application: Turning System components: Compatible outer holder or boring bar, underlay/clamping set, replacement screws FAQ What applications suit this insert best? The CNGN120416 FX105 indexable insert is designed for general external and internal turning tasks; select an appropriate chipbreaker and cutting parameters depending on the workpiece and machining strategy. How does the FX105 grade affect performance? FX105 offers a balance of wear resistance and edge stability; in practice, the grade extends life in mixed machining conditions while maintaining surface integrity on medium loads. Is the insert compatible with standard ISO holders? Yes. The geometry follows ISO conventions; compatibility depends on matching form, tolerance class, attachment and plate thickness with the chosen holder. What is the significance of the 1.6 mm corner radius? A 1.6 mm corner radius increases edge strength and reduces chipping risk on interrupted or unstable cuts, while also influencing the achievable surface finish. Can the insert be used for finishing and roughing? The insert is suitable for a range of turning tasks; pairing the FX105 grade and a matching chipbreaker with appropriate feeds and speeds determines suitability for finishing versus light roughing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120416 LX10 Wendeplatten - Tungaloy
Benefit from the LX10 grade and ISO-compliant geometry for consistent wear resistance and cutting-edge stability; the carbide construction and 1.6 mm corner radius ensure a versatile balance of tool life and surface finish. Order the CNGN120416 LX10 Tungaloy insert directly via Metav Werkzeuge or ask the consultants if needed. CNGN 120416 LX10 Tungaloy indexable insert for turning The CNGN120416 LX10 is an ISO indexable insert for external and internal turning, designed to combine wear resistance with reliable chip control and cutting-edge stability. ISO rhombic insert, 80° geometry LX10 Tungaloy grade for wear resistance Corner radius 1.6 mm for versatility Carbide construction, 4.76 mm plate thickness Consistent cutting performance for routine turning operations The ISO-series rhombic insert offers a dependable solution where repeatable results are required. Manufactured from carbide and graded LX10, the plate is engineered to provide a balance of wear resistance and toughness, helping to maintain a stable cutting edge under continuous machining. This stability reduces unexpected tool changes, supporting predictable cycle times and consistent component quality. For workshop planners and process engineers, the main advantage is fewer interruptions in production while retaining acceptable surface finish and dimensional control. Predictable fitting and system compatibility to simplify setup Compatibility with the toolholder depends on geometry parameters such as form, clearance angle 0°, tolerance class, fastening method, plate size 12 mm and thickness 4.76 mm. The rhombic shape with an 80° included angle suits many standard external holders and boring bars; the insert is supplied without a hole and has no built-in chipbreaker, which allows selection of the most appropriate clamping and holder system for the application. The typical system comprises the ISO indexable plate, a matching external holder or boring bar, a shim or clamping set and replacement screws, enabling straightforward integration into existing tool assemblies. Practical selection guidance for material and finish requirements The LX10 grade complements the geometry by delivering the required mix of cutting-edge stability, toughness and resistance to wear — properties that are decisive when choosing an insert for varied turning tasks. The corner radius 1.6 mm offers a compromise between strength and achievable surface finish: it supports stable cuts in general-purpose applications while still allowing fine finishing with appropriate feeds and speeds. As the plate is supplied without a chipbreaker, selecting a compatible chip control geometry and cutting data for the workpiece material is recommended to ensure efficient chip evacuation and process reliability when turning. For availability and technical application advice on the CNGN120416 LX10 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt confirmation of compatibility and stock Technical data Article number: 6851972 Manufacturer SKU: TUN6851972 SKU: 6851972-Tungaloy Name: CNGN120416 LX10 Tungaloy insert Material: Carbide Facts Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm ISO designation: 120416 Special features LX10 Tungaloy grade Rhombic plate form (CNGN) No hole No chipbreaker Intended use: turning System components: insert, external holder/boring bar, shim/clamp set, replacement screws Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What machining is the CNGN120416 LX10 insert intended for? The CNGN120416 LX10 insert is intended for external and internal turning operations and is designed to be used in ISO-compatible toolholder systems. How should the CNGN120416 LX10 insert be mounted in a holder? Mounting depends on matching holder form, clearance angle, tolerance class, fastening method and plate thickness; the CNGN120416 LX10 (SKU: 6851972-Tungaloy) fits ISO holders that accept a rhombic, 12 mm plate with 4.76 mm thickness. Is there a chipbreaker integrated into the plate? No — the CNGN120416 LX10 insert is supplied without a chipbreaker, so a suitable chip control geometry or holder must be chosen according to the workpiece material and machining task. What does the 1.6 mm corner radius mean for performance? A corner radius of 1.6 mm gives the CNGN120416 LX10 insert a good compromise between cutting-edge strength and surface finish capability, making it versatile for a wide range of turning operations. What are the main attributes of the LX10 grade? The LX10 grade from Tungaloy provides a balanced combination of wear resistance, toughness and cutting-edge stability, supporting process reliability in turning tasks with consistent tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120416 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of consistent edge stability and ISO compatibility for reliable turning results; the LX11 carbide grade extends tool life while the rhombic form ensures versatile clamping. Order the CNGN120416 LX11 insert directly via Metav Werkzeuge or ask our consultants if needed. CNGN120416 LX11 CNGN ISO indexable turning insert for Turning — Tungaloy The CNGN120416 LX11 insert is an ISO‑standard, rhombic indexable insert designed for external and internal turning applications, offering a balanced combination of wear resistance and cutting‑edge stability. *ISO‑compliant rhombic insert, 12 mm size *Carbide grade LX11 for wear resistance *0° clearance angle for stable cutting *1.6 mm corner radius for profile accuracy Consistent performance through ISO conformity and design The insert is built to the ISO indexable insert standards, which means compatibility with a wide range of holders is defined by the insert’s shape, clearance angle, tolerance class, fastening and thickness. This standardisation reduces setup time and simplifies tool management in production environments. The rhombic geometry combined with a 4.76 mm plate thickness provides a rigid seating and helps maintain cutting stability during both external and internal turning. Such predictable behaviour supports higher process reliability and a reduction in scrap rates. LX11 carbide composition optimises wear resistance and edge stability The Tungaloy LX11 carbide grade complements the insert geometry by delivering a tailored balance of wear resistance and toughness, improving edge life under varying cutting conditions. This grade is designed to maintain a stable cutting edge, helping to avoid premature chipping and preserve surface finish over longer tool life. The combination of a hardened substrate and optimised grade selection translates into fewer indexings and lower tool consumption per workpiece, enhancing overall productivity. Practical design details that aid integration and finishing Key dimensions such as the 12 mm size, 1.6 mm corner radius and 80° included angle support precise profile generation and controlled engagement in finishing operations. The insert is supplied without a hole and without a chipbreaker, allowing straightforward clamping in compatible holders and enabling users to select a chip control solution suited to the workpiece material and cutting strategy. The zero‑degree clearance (0°) delivers a consistent rake geometry for predictable cutting forces and surface quality, which is especially beneficial in stable turn‑mill setups. System approach and shop‑floor benefits The insert functions as part of a system that typically includes a matching external holder or boring bar, a seating pad/clamp set and replacement screws. Standardised inserts such as this one simplify stock keeping and support fast tool changes, contributing to reduced machine downtime. The clear specification and ISO labelling also help purchasing and engineering teams to match inserts to existing toolholders with confidence, supporting a smooth production flow and predictable machining results. For application advice on the CNGN120416 LX11 Tungaloy indexable insert or to discuss suitable holders and cutting parameters, please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for a technical consultation. Technical data Article number: 6801893 Manufacturer SKU: TUN6801893 SKU: 6801893-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: 120416 Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 80° Special features Material: carbide Grade: LX11 (Tungaloy) Shape: rhombic Hole: without hole Chipbreaker: without chipbreaker Application: turning Series: ISO indexable turning inserts FAQ What machining applications suit this insert? The CNGN120416 LX11 insert is intended for external and internal turning and is suitable where a rhombic, ISO‑standard insert is required for controlled finishing and profiling. Which material is the insert made from and what does LX11 mean? The insert is manufactured from carbide and graded LX11 by Tungaloy; LX11 offers a balance of wear resistance and toughness to maintain edge stability over extended use. How does the 1.6 mm corner radius affect the cut? A 1.6 mm corner radius gives improved profile accuracy and smoother transitions at the cutting edge, aiding in consistent surface finish while keeping cutting forces manageable. Is this insert compatible with all holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation 120416 helps ensure matching with compliant holders. Does the insert include a chipbreaker or coolant hole? This version is supplied without a chipbreaker and without a hole, allowing selection of chip control and clamping solutions tailored to the specific application. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNGN 120416 LX21 Wendeplatten - Tungaloy
Combine ISO-compatible geometry with the wear-resistant LX21 grade and a 1.6 mm corner radius for dependable turning performance; order via Metav Werkzeuge or consult our technical team for application-specific advice. CNGN120416 LX21 indexable turning insert — 1.6 mm corner radius, 80° rhombic, Tungaloy The CNGN120416 LX21 is an ISO-standard indexable insert intended for external and internal turning, engineered in a Tungaloy carbide grade to balance wear resistance and edge stability for general turning tasks. ISO-standard rhombic insert, 80° geometry Tungaloy LX21 grade for wear resistance 1.6 mm corner radius for robust edges 4.76 mm plate thickness, compatible with standard holders Improved process reliability through ISO compatibility and grade selection The ISO conformity of this insert ensures predictable fitting in standardised holders and boring bars, reducing setup time and variation between tool changes. The LX21 Tungaloy grade combines wear resistance with controlled toughness, which supports longer edge life under mixed cutting conditions. With a carbide substrate and consistent grade specification, the insert contributes to stable production results and fewer unscheduled tool changes. Geometry tailored for stable cuts and edge life The 80° rhombic shape with a 1.6 mm corner radius provides a robust cutting edge that tolerates moderate depth of cut and disruptive feed changes. The reported 0° rake angle gives a neutral cutting action that is easy to control across a range of materials, while the 4.76 mm plate thickness adds mechanical rigidity. Together, these dimensions help maintain surface finish and reduce the risk of premature edge chipping during interrupted cuts. Practical application and handling considerations This insert is supplied without a chipbreaker, so selection of a suitable chip control geometry and cutting data must match the workpiece material and machining stability. The axial description for the model series highlights use for both external and internal turning; selecting a matching holder, shim and clamping set is essential for secure fixation. Operators benefit from the straightforward identification of the LX21 grade when planning tool schedules and tool-life monitoring. System integration and ordering information As part of an ISO insert system the component functions together with the appropriate external holder or boring bar, plus subplates or screw clamps where required. The designation and manufacturer SKU facilitate reordering and inventory management; the form, tolerance class and thickness determine compatibility with existing toolholders. When repeatability and predictable wear behaviour are priorities, this insert offers a standardised, easy-to-manage option for turning operations. For reliable turning performance with Tungaloy LX21 inserts, contact Metav Werkzeuge for technical consultation and availability — Metav Werkzeuge, Parkring 45, 46446 Emmerich; info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6801894 Manufacturer SKU: TUN6801894 SKU: 6801894-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Included angle: 80° Plate thickness: 4.76 mm Size (inscribed circle): 12 mm Special features Material: carbide Grade: LX21 (Tungaloy) Plate form: rhombic Hole: without hole Rake angle: 0° Chipbreaker: without Application: turning FAQ What materials is this insert suitable for? The CNGN120416 LX21 insert with LX21 grade is designed for general turning tasks; material suitability depends on the choice of chip control and cutting data rather than the insert alone. How is compatibility with toolholders ensured? Compatibility is determined by the insert form, thickness and tolerance class; the ISO designation and 80° rhombic geometry make the insert compatible with holders designed for that standard. Is there a chipbreaker included with the insert? This insert is supplied without a chipbreaker; chip control must be achieved by choosing a matching insert geometry or toolholder arrangement. What does the 1.6 mm corner radius mean for machining? A 1.6 mm corner radius increases edge strength and improves durability under moderate feeds and interrupted cuts, while influencing achievable surface finish and allowable feed rates. How can the product be identified for reordering? Use the designation CNGN120416 LX21 or the manufacturer SKU TUN6801894 to ensure consistent reordering and inventory tracking. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120420 FX105 Wendeplatten - Tungaloy
The combination of FX105 wear-resistant grade, carbide substrate and a stable rhombic geometry with R2 corner radius yields dependable cutting performance and extended tool life; order the insert directly via Metav Werkzeuge or request application advice from our consultants. CNGN120420 FX105 CNGN Turning Insert — Tungaloy, ISO turning insert A CNGN120420 FX105 indexable turning insert engineered for precision external and internal turning, compatible with ISO-standard toolholders for robust, repeatable machining. FX105 grade for balanced wear resistance Carbide substrate for stable cutting edges ISO CNGN 120420 dimensional compatibility Rhombic plate, 12 mm size with R2 corner radius Consistent chip control and extended tool life through balanced grade selection The FX105 grade is formulated to balance wear resistance and toughness, delivering reliable edge stability under varying turning conditions. Manufactured on a carbide substrate, the plate maintains cutting integrity where intermittent cuts or variable feed rates occur. This balance reduces the frequency of tool changes and helps maintain consistent part quality; the combination of grade and geometry is especially beneficial for operations that require a compromise between long tool life and resistance to edge chipping. The result is fewer interruptions to production and a steady surface finish across batches. Clear ISO compatibility reduces setup uncertainty and downtime As an ISO-series insert, dimensional conformity is a central benefit: ISO-standard geometry and form allow predictable interaction with matched holders and boring bars. Compatibility depends on form, clearance angle (0°), tolerance class, fastening and plate thickness; specifying the correct holder and clamping set ensures secure seating and repeatable positioning. Where tool repeatability is vital, this standardisation shortens setup time, simplifies inventory of spare plates and supports rapid replacement, thereby improving process reliability on multi-shift shop floors. Geometry tailored for adaptable turning tasks and surface quality control The rhombic plate form with an included angle of 80° and a corner radius of 2 mm (R2) offers a practical compromise between strength and finish. The rhombic shape permits versatile orientation for both external and internal turning, while the R2 radius supplies enough edge strength for moderate depths of cut without sacrificing surface quality. Plate thickness of 4.76 mm supports stable clamping and resistance to bending under load. Together, these geometrical features help achieve consistent dimensional accuracy and predictable tool behaviour across a wide range of steel and alloy turning applications. Practical recommendations for integration and application scope Intended for turning applications, the indexable plate forms part of a system comprising the ISO insert, a suitable external holder or boring bar, a support shim or clamp set and replacement screws. The CNGN120420 FX105 is supplied without a central hole and without an integrated chipbreaker, so selection of an appropriate holder and chip control strategy is important for optimised performance. For best results, match the FX105 grade to the workpiece material and machining strategy; ensure the clamping torque and tolerance class of the holder align with the ISO dimensions to secure cutting stability and minimise vibration. Contact Metav Werkzeuge for tailored recommendations on Tungaloy FX105 inserts and to confirm holder compatibility, delivery options and application optimisation for specific turning tasks Technical data Article number: 6801895-Tungaloy Manufacturer article number: 6801895 Manufacturer SKU: TUN6801895 Manufacturer: Tungaloy Material: carbide Model series: ISO-Drehwendeschneidplatten ISO designation: CNGN120420 Grade: FX105 Facts Size: 12 mm Plate thickness: 4.76 mm Corner radius: 2 mm Clearance angle: 0° Included angle: 80° Hole: without hole Special features Carbide substrate FX105 grade for wear resistance and edge stability Rhombic plate form ISO-standard turning insert No chipbreaker included FAQ What materials is this insert intended for? The CNGN120420 FX105 insert from Tungaloy is designed for general turning tasks; the FX105 grade offers a balance of wear resistance and toughness suitable for a wide range of steels and alloyed materials. How is the insert secured in the holder? As an ISO-series plate, the CNGN120420 requires a compatible external holder or boring bar with matching form, clamp set and screw size; correct clamping and tolerance class are essential for repeatable seating and stable cutting. Does the insert include a chipbreaker or mounting hole? This Tungaloy insert is supplied without a chipbreaker and without a central mounting hole; chip control must therefore be managed via holder geometry and cutting parameters. Which SKU and article number should be referenced when ordering? Please reference SKU 6801895-Tungaloy or manufacturer article number 6801895 when enquiring about the CNGN120420 FX105 indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120708 FX105 Wendeplatten - Tungaloy
Combining the wear-resistant FX105 carbide grade with ISO compatibility and a robust 0.8 mm corner radius delivers consistent, productive turning performance and reduced changeover times; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CNGN120708 FX105 CNGN — Indexable turning insert for turning, Tungaloy CNGN120708 FX105 is a rhombic ISO indexable turning insert intended for external and internal turning where a balance of wear resistance and edge stability is required ISO‑normed rhombic insert, size 12 Tungaloy FX105 carbide for wear resistance 0° clearance and 80° geometry for stability 0.8 mm corner radius for edge strength Consistent tool life through ISO compatibility and predictable mounting The ISO series format ensures that the insert fits standard ISO turning systems when the holder selection matches the insert's form, clearance angle, tolerance class, fastening method, size and thickness. This ISO compatibility reduces set-up time and minimises machining variability, which supports steady production flows and fewer unplanned tool changes. By choosing holders and clamps that conform to the insert's dimensions, rigidity and repeatability are optimised for reliable process control. Sustained cutting performance from the FX105 carbide grade The Tungaloy FX105 grade combines wear resistance with adequate toughness to keep edges stable under typical turning loads. This composition extends the usable life of the cutting edge and helps maintain surface quality over longer tool cycles. As a result, fewer insert changes are required and overall machining costs fall through improved uptime. The grade complements the insert geometry to provide a pragmatic balance between abrasion resistance and chipping resistance during continuous turning operations. Geometry engineered for stability and practical finishing The rhombic shape with an 80° included angle, coupled with a 0° clearance, delivers a stable cutting interface that suits many general turning tasks. The 0.8 mm corner radius increases edge robustness for heavier cuts and interrupted cuts while maintaining acceptable surface finish in standard feeds. The 7.94 mm plate thickness contributes to overall rigidity, and the holeless design simplifies mounting options where a clamping set or screw fastening is used. These geometric choices favour dependable chip control and repeatable dimensional results. Easy integration into tool systems and production logistics The insert is part of a system that normally includes an ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws for secure fixation. Stocking this standardised insert simplifies logistics: fewer holder variants are required when ISO geometry and tolerance classes are observed, and changeovers become predictable. For application-specific advice on holder pairing or if alternative chip control is needed, Metav Werkzeuge can provide guidance and ensure the correct combination for the intended turning task. For reliable turning with the Tungaloy FX105 grade and to confirm holder compatibility, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6801896 Manufacturer SKU: TUN6801896 SKU: 6801896-Tungaloy Name: CNGN120708 FX105 Tungaloy indexable insert Model series: ISO indexable turning inserts Facts Size: 12 Plate thickness: 7.94 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Special features Material: carbide Grade: FX105 (Tungaloy) Plate shape: rhombic Hole: without hole Chipbreaker: without chipbreaker Intended application: turning FAQ What operations is this insert designed for? The CNGN120708 FX105 insert is designed for external and internal turning; compatibility with the chosen holder depends on form, clearance angle, tolerance class, fastening method and size. How does the FX105 grade affect tool life? The FX105 carbide grade from Tungaloy emphasises wear resistance and edge stability, helping the CNGN120708 FX105 insert maintain cutting performance and extend time between replacements. What does a 0° clearance angle mean in practice? A 0° clearance produces a neutral relief condition at the cutting edge that can increase contact area and stability; it is especially useful when rigidity and steady support of the insert are required. Is the insert supplied with screws or a holder? The insert is supplied as the indexable plate; the complete system typically comprises an ISO insert, a matching holder or boring bar, a shim/clamp set and replacement screws, which should be sourced to match the plate's form and tolerance. When is a 0.8 mm corner radius recommended? The 0.8 mm radius offers a good compromise between edge strength and surface finish: it supports heavier cuts or interrupted machining while still achieving acceptable surface quality at standard feed rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120708 LX10 Wendeplatten - Tungaloy
High wear resistance, a stable cutting edge and ISO‑standard geometry ensure productive turning and quick tool changes; compatibility is secured by the insert’s form, relief angle and dimensions. Order the CNGN 120708 LX10 indexable insert directly via Metav Werkzeuge or contact our consultants for holder matching and application advice. CNGN 120708 LX10 — indexable turning insert for turning | Tungaloy The CNGN 120708 LX10 is an ISO‑standard rhombic insert intended for external and internal turning, combining a balanced carbide grade with a robust geometry for repeatable, productive machining. ISO‑standard rhombic geometry Carbide grade LX10 for wear resistance 0.8 mm corner radius for profile control Compatible with standard CNGN holders Reliable cutting performance for productive turning The insert delivers consistent cutting performance through the combination of a purpose‑designed carbide grade and a predictable geometry. The LX10 grade from Tungaloy is formulated to balance wear resistance and edge stability, reducing the need for frequent index changes and supporting longer uninterrupted machining cycles. This stability contributes to improved process reliability and helps maintain component tolerances in batch production. Simplified compatibility reduces setup time ISO standardisation of the insert’s form, corner radius and dimensions means fast holder compatibility and reduced setup complexity. Compatibility is determined by shape, relief angle (0°), tolerance class, clamping method, size and thickness; this insert’s rhombic form and standardised dimensions allow straightforward pairing with commonly used CNGN external holders and boring bars. The absence of a hole simplifies seating and clamping options for many holder designs. Geometry and grade for repeatable surface quality The combination of an 80° included angle, a 0.8 mm corner radius and a measured plate thickness gives predictable engagement at the tool tip, which supports consistent surface finish and dimensional control. The insert’s geometry is particularly advantageous where a controlled corner is required to avoid chatter and preserve tool life, while the carbide composition aids in sustaining the cutting edge under varied cutting conditions. Practical system considerations for workshop use The insert forms part of a complete ISO indexable system: the cutting plate itself, a matching external holder or boring bar, and clamping/fastening components. The plate is supplied without hole, with a plate thickness of 7.94 mm and a size designation of 12, making it suitable for standard CNGN mounting arrangements. Selecting the appropriate chipbreaker and grade to match workpiece material and machining stability will further enhance productivity. Contact Metav Werkzeuge for tailored advice on holder compatibility and application optimisation for the Tungaloy CNGN 120708 LX10 insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6851992 Manufacturer SKU: TUN6851992 SKU: 6851992-Tungaloy Model series: ISO indexable turning inserts Intended application: Turning Facts Corner radius: 0.8 mm Plate size: 12 Plate thickness: 7.94 mm Included angle: 80° Relief angle: 0° Hole: without hole Features Material: carbide Grade: LX10 (Tungaloy) Plate shape: rhombic Chipbreaker: none System components: insert, external holder or boring bar, clamping set, spare screws Typical uses: external and internal turning FAQ What materials is this insert suitable for? The CNGN 120708 LX10 insert is a carbide grade designed for versatile performance; the LX10 composition provides a balance of wear resistance and toughness suitable for a broad range of steels and alloyed materials in turning operations. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius on the CNGN 120708 LX10 gives a controlled cutting edge that improves profile accuracy and surface finish while helping to dampen vibration in medium to stable machining setups. Does this insert fit standard CNGN holders? Yes — the ISO‑standard form, dimensions and relief angle of the CNGN 120708 LX10 ensure compatibility with standard CNGN holders and many common boring bars when the holder matches the insert’s geometry and tolerance class. Is a chipbreaker included with this insert? This specific version is supplied without a chipbreaker; the CNGN 120708 LX10 plate is intended to be matched with suitable chip control strategies or holder designs depending on the workpiece material and cutting conditions. What information is needed to select the correct holder? Selection requires matching the insert’s form, relief angle (0°), plate size (12), thickness (7.94 mm), clamping method and tolerance class; Metav Werkzeuge can advise on the correct holder for the CNGN 120708 LX10. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120708 LX11 Wendeplatten - Tungaloy
Benefit from the combination of LX11 wear resistance, a 0.8 mm corner radius and ISO conformity to secure consistent, productive turning operations; order the insert directly via Metav Werkzeuge or contact our advisers for application guidance. CNGN 120708 LX11 ISO turning insert for precision external and internal turning — Tungaloy CNGN120708 LX11 is a rhombic ISO turning insert designed for reliable external and internal turning in conventional and CNC applications ISO‑normed rhombic insert, 80° geometry LX11 carbide grade for wear resistance 0.8 mm corner radius for fine finishing Compatible with standard turning holders Predictable geometry for consistent surface finish and tool life The ISO-standard rhombic geometry with an 80° included angle combines cut stability with access to confined features. A 0.8 mm corner radius reduces vibration at the cutting edge while enabling a fine surface finish on shafts and shoulders. This geometry supports controlled chip formation and predictable tool wear, which helps to reduce rework and minimise machine downtime. The relief angle of 0° provides a stable seating in the holder and contributes to repeatable cutting conditions. Grade and material built for balanced wear resistance and toughness Manufactured from tungsten carbide and specified with the LX11 Tungaloy grade, the insert is designed to balance wear resistance and edge toughness. LX11 complements the geometry by maintaining a stable cutting edge under varying cutting forces, making the insert suitable where a compromise between durability and reliability is required. The result is longer intervals between indexings and fewer tool changes, improving throughput on series turning tasks without sacrificing dimensional control. Workshop integration and application guidance for smooth planning The insert is delivered in the ISO series for turning and has a plate size of 12 mm with a plate thickness of 7.94 mm, presented without a centre hole and without a chipbreaker. Compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; selecting the matching outer holder or boring bar ensures correct clamping and thermal behaviour. For external and internal turning, choose the appropriate holder geometry and, where necessary, a chipbreaker and grade that suit the workpiece material to achieve stable material removal and consistent surface quality. For robust, repeatable turning choose the Tungaloy LX11 solution and contact Metav Werkzeuge for availability and tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6801897 Manufacturer SKU: TUN6801897 SKU: 6801897-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Measurements and core data Corner radius: 0.8 mm Plate thickness: 7.94 mm Plate size: 12 mm Included angle: 80° Relief angle: 0° Design and features Material: tungsten carbide Grade/coating: LX11 (Tungaloy) Plate form: rhombic Centre hole: without hole Chipbreaker: without Intended application: turning (external and internal) ISO designation: CNGN120708 FAQ What machining tasks is this insert best suited for? This insert is optimised for turning operations; the CNGN120708 LX11 insert performs well on external and internal turning where a balance of wear resistance and toughness is required. How does the LX11 grade affect performance? The LX11 grade from Tungaloy provides a compromise between wear resistance and edge stability, enabling longer tool life and reliable performance under varying cutting loads. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; selecting a holder that matches the insert’s rhombic form and 7.94 mm thickness ensures correct clamping. Can this insert be used for finishing and semi-finishing passes? Yes; the 0.8 mm corner radius and stable edge provided by the LX11 grade make the insert suitable for fine finishing and controlled semi-finishing in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120708 TS300 Wendeplatten - Tungaloy
Take advantage of ISO‑standard compatibility and the TS300 grade’s balance of wear resistance and toughness for reliable turning performance; order the insert directly via Metav Werkzeuge or request application advice from the consultancy team. CNGN120708 TS300 ISO turning insert – Tungaloy, rhombic 0.8 mm radius CNGN120708 TS300 is an ISO‑standard rhombic turning insert intended for external and internal turning applications, optimised for stable setups and predictable tool life. ISO‑standard rhombic geometry TS300 grade for wear resistance 0° clearance angle for versatile use 0.8 mm corner radius for precise finishes Predictable machining through ISO conformity and material design The ISO conformity of this insert ensures repeatable seating and predictable cutting angles across compatible holders, which reduces setup time and scrap rates. Manufactured from carbide and specified as TS300, the grade combines wear resistance and toughness to provide consistent performance in general turning operations. This standardisation simplifies stock keeping and tool selection in production environments where process stability is essential. Geometry and dimensions that support secure clamping and stable cuts The rhombic plate form with an included angle of 80°, a 0.8 mm corner radius and a 0° clearance angle gives a compact cutting edge suitable for both contouring and light finishing passes. The insert’s holeless design and a plate thickness of 7.94 mm require a matching clamping system; compatibility is determined by form, freiwinkel, tolerance class, fastening, size and thickness. Such defined parameters aid in selecting the correct holder and clamping set for maximum edge stability. Practical application advice and system considerations Designed for turning, the insert is part of an ISO turning system comprising the insert, an appropriate external holder or boring bar, and the necessary shim or clamp set. The TS300 carbide grade complements the geometry by providing a balance between edge life and chipping resistance; this makes the insert suitable for a wide range of standard turning tasks when rigidity and repeatability are priorities. For optimum results, match chipbreaker style and grade to the workpiece material and machining stability. Contact Metav Werkzeuge for availability and tailored machining recommendations for the Tungaloy TS300 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6182031 SKU: 6182031-Tungaloy Manufacturer SKU: TUN6182031 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Plate designation: CNGN120708 Size: 12 mm Plate thickness: 7.94 mm Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Special features Grade: TS300 Material: carbide Plate form: rhombic Hole: without hole Chipbreaker: without Intended use: turning (external and internal) Compatibility determined by form, freiwinkel, tolerance class, fastening, size and thickness FAQ What is the intended application for this insert? The CNGN120708 TS300 insert is intended for external and internal turning where reliable edge stability and predictable tool life are required. How is compatibility with a holder determined? Compatibility is defined by the insert’s form, freiwinkel (clearance angle), tolerance class, fastening method, size and thickness; the holeless plate requires an appropriate clamp or seat. What does the TS300 grade offer in practice? TS300 is a Tungaloy carbide grade formulated to balance wear resistance and toughness, providing stable cutting edge behaviour across a broad range of standard turning tasks. Does the insert include a chipbreaker or a centre hole? This version has no chipbreaker and is supplied without a hole, which must be considered when selecting the clamping system. For which machining operations is a 0.8 mm radius suitable? A 0.8 mm corner radius offers a compromise between edge strength and finish quality, making it suitable for general finishing and light to moderate turning passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120712 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of carbide construction, ISO‑compliant rhombic geometry and the FX105 grade for consistent wear resistance and stable cutting performance. Order inserts directly via Metav Werkzeuge or consult our specialists for application advice. CNGN120712 FX105 80° Turning Insert – Tungaloy A CNGN120712 FX105 turning insert designed for ISO‑compliant external and internal turning in general workshop and production environments ISO‑compliant rhombic insert FX105 grade for wear resistance 80° geometry for stable cutting Corner radius 1.2 mm for robustness Proven economy through controlled wear and longer service life The combination of a carbide substrate and the FX105 grade provides a balanced blend of wear resistance and toughness, which extends tool life under a wide range of turning conditions. This results in fewer indexings and reduced tooling costs over production cycles. The 80° approach angle contributes to a predictable cutting force direction, supporting stable machining and consistent dimensional results. For manufacturers seeking to reduce downtime, this balance offers measurable efficiency gains. Clear compatibility and mounting guidance for fast tool changes The insert is ISO‑compliant, rhombic in form and supplied without a hole, so compatibility is determined by the holder’s form, relief angle, tolerance class, clamping method, size and thickness. The specified relief angle 0° and thickness 7.94 mm allow straightforward selection of matching external holders or boring bars. Explaining these interfaces reduces setup time: when the holder matches the insert geometry, clamping stability and repeatability are ensured, lowering the risk of vibration-related wear. Reliable performance in external and internal turning tasks With a corner radius of 1.2 mm, the geometry is optimised for a wide spectrum of turning operations where edge strength is critical. The rhombic shape supports both roughing and finishing passes depending on feed and depth of cut, while the absence of a chipbreaker allows selection of cutting data and coolant strategies tailored to the material being machined. This insert is suitable where straightforward, repeatable turning operations are required and where a robust edge reduces the chance of unexpected failure. Practical benefits for production environments and operators Choosing a standardised ISO insert simplifies inventory and tool management across multiple machines. The carbide construction and Tungaloy grade are engineered to deliver stable cutting‑edge behaviour and predictable wear patterns, which aids in process planning and quality control. Combined with correct holder selection and machining parameters, the result is reliable surface finish and dimensional stability, supporting efficient workflow and lower scrap rates. Contact Metav Werkzeuge for specialist guidance on applying the Tungaloy FX105 grade and to discuss compatible holders and cutting parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6801898 Manufacturer SKU: TUN6801898 SKU: 6801898-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNGN120712 FX105 Tungaloy-Wendeplatte Manufacturer part number: 6801898 Facts Size: 12 mm Thickness: 7.94 mm Corner radius: 1.2 mm Relief angle: 0° Approach angle: 80° Special features Material: Carbide Grade: FX105 (Tungaloy) Shape: Rhombic Hole: without hole Chipbreaker: none Application: Turning (external and internal) System components: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suited for? The FX105 grade is a versatile Tungaloy solution intended for a broad range of materials; selection should be matched to the workpiece material and machining conditions for best results. How does the 80° geometry affect cutting? An 80° approach angle directs cutting forces in a way that often improves stability for external turning, helping to maintain consistent dimensional accuracy during production. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker, allowing process engineers to choose cutting data and chip control measures appropriate to the workpiece material and coolant strategy. What holder features must be checked for compatibility? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; ensuring these match the insert specifications secures proper seating and repeatability. Can the corner radius of 1.2 mm be used for finishing passes? A 1.2 mm corner radius offers a compromise between edge strength and finish capability; with reduced feeds and appropriate speeds it can deliver acceptable surface quality for many finishing tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120712 LX10 Wendeplatten - Tungaloy
Take advantage of ISO-conform geometry and the LX10 grade to combine edge stability with predictable tool life; the rhombic 80° design and 1.2 mm corner radius support reliable external and internal turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CNGN120712 LX10 indexable turning insert for turning by Tungaloy CNGN120712 LX10 Tungaloy indexable insert designed for ISO-standard turning applications, featuring an 80° rhombic form and a 1.2 mm corner radius for stable workholding and consistent surface results ISO CNGN format, 80° rhombic geometry LX10 grade for wear resistance and toughness Carbide substrate for high productivity 1.2 mm corner radius for smooth profiling Reliable geometry for consistent turning accuracy The ISO-design of this insert ensures predictable seating and repeatability in standard holders. The 80° rhombic shape provides a balanced cutting face suitable for both external and internal operations, while the 1.2 mm corner radius helps smooth tool engagement and reduces chatter on less rigid setups. Because the insert conforms to ISO dimensions, changeovers are straightforward and setup time is reduced, supporting uninterrupted production and consistent part quality. The neutral relief and standard form make the component straightforward to integrate into established tool systems. Grade and substrate engineered for longer runtimes The LX10 Tungaloy grade complements the insert geometry by balancing wear resistance and toughness, resulting in a cutting edge that retains form under intermittent loads and varying workpiece conditions. Manufactured on a carbide substrate, the insert is intended to provide stable performance across a range of turning tasks; the combination of grade and substrate reduces flank wear and supports repeatable surface finish. For operations where a compromise between edge life and impact resistance is required, this grade is designed to reduce unscheduled tool changes and maintain productivity. System compatibility and operational considerations Integration into a tool system requires attention to holder form, clearance, tolerance class, attachment and thickness; the insert pairs with matching external holders or boring bars and uses the correct shim/clamping set and replacement screws for secure fixing. The insert’s 0° relief denotes a neutral relief geometry that interacts with holder rake and insertion angle; toolmakers should verify holder geometry to achieve the desired cutting engagement. Supplied without a chipbreaker, the plate allows selection of chip control strategies tailored to the workpiece and machining stability—choose an appropriate chip control or adjust cutting parameters where required. Productivity benefits and typical applications Designed for ISO-conform turning tasks, the indexable plate supports efficient machining of turned parts with predictable maintenance intervals. Stable edge properties reduce rework and increase machine uptime, while the standardised format simplifies inventory and tool planning across multiple machines. Typical use cases include general external and internal turning where a robust corner radius and balanced grade improve surface finish and dimensional consistency. The construction aims to deliver reliable performance in production environments where changeover speed and repeatability are decisive advantages. For tailored selection advice or to order the Tungaloy LX10 insert for specific turning tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-focused support Technical Data Article number: 6851999-Tungaloy Manufacturer SKU: TUN6851999 Manufacturer item no.: 6851999 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 1.2 mm Included angle: 80° Relief angle: 0° Plate size: 12 mm Plate thickness: 7.94 mm ISO code: 120712 Special features Grade: LX10 (Tungaloy) ISO designation: CNGN120712 Plate form: Rhombic Hole: without hole Chipbreaker: none Application: Turning FAQ Is this insert suitable for both external and internal turning? Yes. The CNGN120712 LX10 Tungaloy insert is designed for ISO-conform external and internal turning applications; selection of holder and cutting parameters determines final performance. What benefits does the LX10 grade provide? The LX10 grade on this Tungaloy indexable plate combines wear resistance with edge stability, extending useful cutting life while maintaining consistent surface quality. How is the insert secured in the holder? The insert is mounted in a compatible ISO holder or boring bar, using the appropriate shim or clamping kit and replacement screws specified for the holder and the insert size. What does the 0° relief angle mean in practice? A 0° relief indicates a neutral relief geometry on the insert itself; final cutting clearance depends on holder geometry and seating, so verification of holder-insert combination is recommended. Does the insert include a chipbreaker? No, the insert is supplied without a chipbreaker, allowing chip control to be selected according to workpiece material and machining conditions Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com