CNGN 120712 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of LX11 wear resistance and the 80° rhombic geometry for reliable, repeatable turning performance; compatibility with ISO holders ensures seamless integration in standard setups — order the insert via Metav Werkzeuge or consult our specialists for application advice. CNGN 120712 LX11 — Turning insert, ISO-standard rhombic, 80° geometry (Tungaloy) The CNGN 120712 LX11 is an ISO-standard rhombic indexable insert intended for general turning applications, offering robust edge life and predictable behaviour in production-oriented machining. ISO-standard rhombic insert 80° geometry LX11 grade with wear-resistant carbide 1.2 mm corner radius for stable cutting Compatible with ISO turning holders Longer tool life through optimised grade and substrate The LX11 designation denotes a Tungaloy-developed carbide grade that balances wear resistance and toughness for sustained cutting performance. Manufactured from cemented carbide, this insert minimises flank and crater wear in many turning scenarios, which reduces changeover frequency and supports longer production runs. As an indexable insert, it provides a cost-effective way to restore cutting edges without full-tool replacement, improving uptime and lowering per-part tooling cost. Seamless integration with ISO tooling for secure setups Designed to the ISO form and size conventions, the insert's 80° rhombic geometry and dimensional data (nominal 12 mm size and 7.94 mm thickness) ensure compatibility with standard turning holders. The 0° clearance specification and the insert’s tolerance class determine fit and repeatability; mounting is influenced by form, clearance angle, fastening method, size and thickness. This engineered compatibility simplifies tool selection and reduces setup time when matching inserts to holders and boring bars. Stable cutting and consistent surface quality A 1.2 mm radius at the corner offers a compromise between edge strength and surface finish, giving stable cutting forces and improved resistance to chipping. The lack of an integrated chipbreaker makes the insert suitable for applications where chip control is managed by tool path or coolant strategy rather than the insert geometry. With predictable edge behaviour, the component surface integrity benefits from fewer edge-related irregularities, leading to more consistent part quality and lower rework rates. For reliable, repeatable turning using Tungaloy LX11-grade inserts, contact Metav Werkzeuge for supply and tailored technical guidance via info@metav-werkzeuge.com or telephone +49 2822 7131930. Technical data Article number: 6801899 Manufacturer SKU: TUN6801899 Label: CNGN120712 LX11 Tungaloy-Wendeplatte Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: CNGN120712 Size: 12 mm Thickness: 7.94 mm Corner radius: 1.2 mm Geometry angle: 80° Clearance angle: 0° Hole: without hole Chipbreaker: without Special features Material: cemented carbide Grade: LX11 (Tungaloy) Plate form: rhombic Intended use: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What is the primary application of this insert? The CNGN 120712 LX11 insert is designed for general turning operations, providing an ISO-standard solution for both external and internal turning tasks. Which toolholders are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the CNGN120712 matches standard ISO turning holders built for 12 mm rhombic inserts. What benefits does the LX11 grade deliver? The LX11 grade from Tungaloy combines wear resistance and toughness to deliver stable edge life, reducing index changes and supporting consistent machining performance. Does the insert include a chipbreaker or mounting hole? This insert is supplied without a chipbreaker and without a hole, so chip control and clamping must be considered in the tool and process setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120712 TS200 Wendeplatten - Tungaloy
The combination of the TS200 cutting grade and a 1.2 mm corner radius delivers a balanced mix of wear resistance and edge strength for efficient turning operations; the rhombic ISO geometry ensures broad holder compatibility. Order the genuine insert directly via Metav Werkzeuge or consult the technical team for grade and holder matching. CNGN120712 TS200 – Turning indexable insert by Tungaloy The CNGN120712 TS200 is a rhombic, ISO-designated turning indexable insert designed for external and internal turning tasks across a wide range of materials. ISO rhombic insert CNGN 120712 Tungaloy TS200 grade for wear resistance 1.2 mm corner radius, 0° clearance Higher uptime through a wear‑resistant grade The TS200 grade is a Tungaloy-developed carbide combination that emphasises wear resistance while retaining sufficient toughness for interrupted or semi-stable cuts. In practice, this balance reduces flank wear and extends tool life compared with softer grades, which translates into fewer insert changes and higher machine availability. For production environments where consistent surface finish and repeatable tool life are priorities, the combination of carbide substrate and the TS200 coating characteristics supports stable chip formation and predictable regrinding cycles. Secure seating and repeatable set‑ups for faster changeovers Built to the ISO series dimensions, the geometry of this rhombic insert ensures compatibility with standard turning holders; important matching criteria include form, relief angle, tolerance class, attachment method, size and thickness. The specified 0° clearance and the 80° included angle provide a neutral machining geometry that helps achieve steady contact conditions in many turning set-ups. Because the insert conforms to ISO tolerances, clamping repeatability is improved and set-up time is reduced, which benefits batch production and mixed‑batch workflows. Practical machining scope and handling recommendations The holeless, rhombic design and a 1.2 mm corner radius make the insert versatile for medium feeds where edge strength matters without sacrificing contour fidelity. With a plate thickness of 7.94 mm the insert maintains rigidity under axial and radial loads, while the absence of a chipbreaker means the chip control strategy should be selected according to workpiece material and cutting conditions. Suitable for both external and internal turning, the insert works well when paired with a matching holder or boring bar and the correct clamp/shim set, forming a complete system that supports productive machining. Contact Metav Werkzeuge for application advice or to order genuine Tungaloy CNGN120712 turning inserts; technical specialists are available by e-mail info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6311051 Manufacturer SKU: TUN6311051 Manufacturer item number: 6311051 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: carbide Dimensions & measurable data Corner radius: 1.2 mm Insert size: 12 mm Thickness: 7.94 mm Included angle: 80° Clearance angle: 0° Design & features Rhombic plate form ISO designation: 120712 Grade/sort: TS200 No hole Chipbreaker: none Application: turning (external and internal) FAQ What materials is this insert suitable for? The CNGN120712 TS200 insert is designed as a versatile turning tool; the TS200 grade provides broad material coverage and is suitable for many steels and alloyed materials where wear resistance is required. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength compared with smaller radii, improving resistance to chipping while still allowing acceptable surface finish in general turning applications. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions (CNGN 120712), so compatibility with standard turning holders is determined by form, relief angle, tolerance class, attachment, size and thickness. Why is there no chipbreaker specified? This version is supplied without a chipbreaker to allow selection of the most appropriate chip control strategy for the workpiece material and cutting conditions; the absence of a chipbreaker can be advantageous in applications requiring specific chip shapes. How to order the genuine Tungaloy insert and which SKU to reference? Refer to article number 6311051 or manufacturer SKU TUN6311051 when ordering genuine Tungaloy turning inserts; Metav Werkzeuge can assist with selection and supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120712 TS300 Wendeplatten - Tungaloy
High wear resistance and a stable cutting edge make this ISO‑design insert ideal for consistent turning operations; its TS300 grade and robust carbide body deliver balanced toughness and abrasion resistance. Order directly via Metav Werkzeuge or request technical advice for optimal holder matching. CNGN120712 TS300 ISO turning insert — Tungaloy, rhombic 80° geometry The CNGN120712 TS300 is an ISO‑standard rhombic indexable insert designed for external and internal turning, engineered to combine wear resistance with cutting‑edge stability for general turning tasks. ISO‑compliant rhombic insert TS300 wear‑resistant grade 80° seating angle for secure clamping 1.2 mm corner radius for strength and finish Stable performance through material and grade selection The combination of a carbide substrate with the TS300 cutting grade provides a reliable balance of wear resistance and toughness, which reduces edge failure during interrupted cuts. The specialised grade complements the insert geometry to ensure steady cutting forces and extended tool life when machining a broad range of steels and alloyed materials. By choosing this insert, operations benefit from predictable tool behaviour and fewer unexpected tool changes, supporting higher process efficiency and reduced downtime. Rigidity and surface quality for consistent turning An insert thickness of 7.94 mm and an 80° seating geometry increase clamping stability in suitable holders, lowering vibration and improving surface finish during both external and internal turning. The 1.2 mm corner radius offers a compromise between edge strength and the ability to achieve good surface integrity; a larger radius boosts edge life, while a smaller one improves profile accuracy. These measurable characteristics translate directly into fewer rework cycles and steadier cycle times on production lines. System compatibility and application guidance The ISO designation encapsulates form, size and tolerance: a rhombic CNGN form with the 120712 size ensures straightforward matching with ISO‑compatible external holders or boring bars; the insert is supplied without a hole and has a 0° clearance angle, so the correct clamp or seat must be selected for secure fixation. Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness—verify these parameters when replacing inserts. The insert suits general turning; chipbreaker selection should be matched to the workpiece material, machining strategy and machine stability to optimise chip control. Practical benefits and machining recommendations Using a purpose‑matched insert delivers concrete economic benefits: longer uninterrupted cutting times, fewer tool changes and improved reproducibility of component quality. For general turning, pair this indexable insert with a rigid holder and adapt feed and speed to material and machine dynamics. If machining unstable setups or heavy interrupted cuts, select a geometry or chip control solution that prioritises edge strength. Clear labelling and ISO conformity simplify tool management and inventory control across production sites. Contact Metav Werkzeuge for application advice on Tungaloy TS300 inserts and fast delivery — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6182032 Manufacturer: Tungaloy Manufacturer SKU: TUN6182032 Model series: ISO turning inserts Core data ISO designation: CNGN120712 Corner radius: 1.2 mm Seating angle: 80° Plate thickness: 7.94 mm Plate size: 12 mm Materials and features Material: carbide Grade/coating: TS300 (Tungaloy) Plate form: rhombic Hole: without hole Clearance angle: 0° Application: turning Chipbreaker: none FAQ What materials is this insert suitable for? The CNGN120712 TS300 insert is formulated for a wide range of steels and alloyed materials; the TS300 grade provides balanced wear resistance and toughness for general turning tasks. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and contributes to improved surface finish under stable cutting conditions when using the CNGN120712 TS300 insert. Is the insert compatible with standard ISO holders? Yes — the ISO designation indicates compatibility with ISO‑compliant external holders or boring bars that match form, size, thickness and fastening method for the CNGN120712 TS300. Does this insert include a chipbreaker? This particular insert is supplied without a chipbreaker; chip control should be addressed via geometry selection or matched peripheral tooling depending on the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120716 FX105 Wendeplatten - Tungaloy
Benefit from the combination of the FX105 grade’s wear resistance and edge stability, the ISO‑standard CNGN form with an 80° included angle and a 1.6 mm corner radius for reproducible turning results. Order the insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. CNGN 120716 FX105 — Turning insert (CNGN120716-T1), 80° by Tungaloy The CNGN 120716 FX105 is an ISO‑standard indexable turning insert for external and internal turning, engineered to deliver stable cutting-edge performance and consistent chip control in a wide range of machining situations. ISO rhombic insert, 80° geometry Tungaloy FX105 grade for wear resistance Corner radius 1.6 mm for stable cutting Compatible with ISO turning holders Consistent tool life through balanced grade and geometry The combination of the FX105 Tungaloy grade and a carbide substrate provides a deliberate balance of wear resistance and toughness. This balance reduces unexpected edge breakage and extends service intervals, which supports predictable machining costs and fewer unplanned stoppages. The insert’s geometry and its T1 chipbreaker are optimised for controlled chip formation, so the result is a more stable cutting process and improved surface quality. For production environments where repeatability matters, the engineered durability of this insert keeps cycle times steady and finishing operations more reliable. Predictable fit‑up and quick tool change‑over Being an ISO‑design insert, the form factor and tolerance profile mean straightforward compatibility with a wide range of external holders and boring bars. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the insert requires the usual shim or clamp kit and replacement screws for secure clamping. The 80° included angle and 0° clearance specification translate into robust support in the pocket and lower vibration tendency when compared with more acute forms, while the 1.6 mm corner radius helps maintain edge strength for medium‑depth passes. These traits reduce setup time and simplify tool‑holder selection in mixed‑batch workshops. Practical selection advice for reliable results Intended for turning, the insert suits both external and internal operations when the correct chipbreaker and grade are matched to the part material and machine stability. Choose the FX105 grade where a combination of abrasion resistance and edge stability is required; the T1 chipbreaker is appropriate for general turning tasks where consistent chip control is needed. Using the correct insert geometry and grade supports improved surface finish and reduces the frequency of tool changes, which in turn lowers overall tooling expenditure. For difficult material mixes or when switching between roughing and finishing, consult machining data to select the suitable cutting parameters and maximise the insert’s lifetime. For technical consultation or to secure the CNGN 120716 FX105 insert for immediate dispatch, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930; specialists will advise on holder compatibility and recommended cutting data. Technical data Article number: 6801900 Manufacturer SKU: TUN6801900 Product SKU: 6801900-Tungaloy Model series: ISO turning inserts ISO designation: CNGN120716-T1 Numerical data Insert size: 12 Plate thickness: 7.94 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 80° Materials / Special features Material: carbide Grade: FX105 (Tungaloy) Chipbreaker: T1 Shape: rhombic Hole: without hole Intended application: turning (external and internal) System components: matching external holder or boring bar, shim/clamp kit, replacement screws FAQ What machining tasks is this insert suited for? The CNGN120716-T1 insert in FX105 grade is designed for both external and internal turning tasks where balanced wear resistance and edge stability are required. Which holder types are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance and fastening; the insert is compatible with standard ISO external turning holders and boring bars when matched to the CNGN form. How does the FX105 grade affect tool life? The FX105 Tungaloy grade combines wear resistance with toughness, which helps to extend tool life by reducing edge chipping and improving resistance to abrasive wear. When should the T1 chipbreaker be chosen? The T1 chipbreaker is suitable for general turning operations that require reliable chip control and a consistent cutting process across varying materials and stability conditions. Is any special clamping hardware required for this insert? The insert requires the regular shim or clamp kit and appropriate replacement screws for secure mounting in the holder pocket; no special bespoke hardware is necessary. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNGN 120716 LX10 Wendeplatten - Tungaloy
Benefit from a balanced combination of LX10 carbide grade and a precise T1 chipbreaker to improve cycle times and edge stability in turning operations. The insert’s rhombic form and 1.6 mm corner radius ensure reliable contact geometry and repeatable results. Order the CNGN120716-T1 LX10 Tungaloy indexable insert directly via Metav Werkzeuge or consult our specialists for application support. CNGN 120716 LX10 — Indexable turning insert for Turning (Tungaloy) CNGN120716-T1 LX10 Tungaloy indexable insert designed for general external and internal turning, offering a balanced mix of wear resistance, toughness and cutting-edge stability. ISO‑standard rhombic form 1.6 mm corner radius LX10 Tungaloy carbide grade 0° clearance angle for turning Optimised compatibility and predictable process stability The ISO-standard geometry delivers straightforward integration into suitable toolholders; compatibility depends on form, 0° clearance, tolerance class, fastening and plate dimensions. The rhombic profile with an approach angle of 80° provides a robust seating condition that contributes to consistent cutting forces and surface finish. For workshops requiring predictable performance, this insert’s mechanical layout reduces set-up variations and supports standardised tool inventories, which helps to shorten machine downtime and simplifies holder selection. Grade selection that balances wear resistance and edge strength The LX10 grade, a Tungaloy-engineered carbide, is formulated to add the necessary balance of wear resistance, toughness and edge stability to a given geometry. In practical terms, this means longer intervals between indexings and fewer edge failures when machining a broad range of steels and alloyed materials. The presence of a dedicated T1 chipbreaker further improves chip control under varying feeds and depths of cut, reducing rework and cleaning time while maintaining dimensional accuracy on turned components. Practical mounting and handling advice for safer operation Installation requires correct orientation and secure fastening in a compatible outside holder or boring bar, using the matching clamp plate and screw set. The insert has no centre hole and is specified as a top-clamped rhombic plate—this reduces the number of fasteners and simplifies changeover. The 1.6 mm corner radius suits general finishing to medium roughing passes; selecting the appropriate feed and depth of cut in line with the grade’s capabilities will extend life and preserve the cutting edge. For new setups, verify seat fit, torque on the clamping screw and machine rigidity to exploit the insert’s full potential. For reliable machining results with the LX10 Tungaloy grade, contact Metav Werkzeuge for bespoke recommendations and secure procurement through Metav Werkzeuge. Technical data Article number: 6852012 SKU: 6852012-Tungaloy Manufacturer SKU: TUN6852012 Facts Corner radius: 1.6 mm Plate size: 12 mm Thickness: 7.94 mm Clearance angle: 0° Approach angle: 80° ISO designation: CNGN120716-T1 Special features Material: carbide Grade: LX10 Chipbreaker: T1 Plate form: rhombic Hole: without hole Model series: ISO indexable turning inserts Application: turning Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The LX10 grade insert is designed as a versatile carbide solution; the CNGN120716-T1 LX10 Tungaloy insert performs well across a wide range of steels and commonly machined alloyed materials. How does the T1 chipbreaker influence machining? The T1 chipbreaker on this indexable insert helps control chip formation during turning, improving surface finish and reducing risk of built-up edge on the cutting edge. Which holder type is required for this insert? This rhombic, top‑clamped ISO insert requires a compatible ISO external holder or boring bar sized for a 12 mm plate and matching clamp and screw set; compatibility is guided by form and plate thickness. What cutting geometry parameters should be observed? Observe the 0° clearance angle, the 80° approach geometry and select feeds and depths of cut appropriate to the 1.6 mm corner radius to balance tool life and workpiece finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120716 LX11 Wendeplatten - Tungaloy
Benefit from the ISO-standard geometry and the LX11 Tungaloy grade: the combination of a 1.6 mm corner radius and an 80° rhombic form delivers stable cutting and consistent chip control for turning tasks; order via Metav Werkzeuge or consult our specialists for application support. CNGN 120716 LX11 Turning Insert — Tungaloy CNGN120716‑T1 (rhombic, 80°, 1.6 mm radius) A CNGN120716‑T1 LX11 ISO-standard turning insert designed for external and internal turning, engineered to provide reliable chip control and prolonged edge life. ISO-standard rhombic geometry 80° Tungaloy LX11 grade for wear resistance 1.6 mm corner radius for robust edges T1 chipbreaker for reliable chip control Consistent cutting performance and longer edge life The insert combines a wear-resistant LX11 carbide grade with a design optimised for repeatable performance under turning conditions. The T1 chipbreaker promotes predictable chip formation, which reduces the risk of built-up edge and supports a steady surface finish. By balancing wear resistance and toughness, the grade helps maintain a stable cutting edge over longer tool life, reducing the frequency of index changes and contributing to efficient production cycles. ISO compatibility that simplifies tool setup Manufactured to ISO dimensions, the insert ensures compatibility with standard holders when form, clearance angle, tolerance class, fixing method, size and thickness match. The rhombic 80° geometry and a clearance angle of 0° allow versatile positioning for both external and internal operations. With a size of 12 mm and thickness of 7.94 mm, the insert fits common CNGN pockets; note that it is supplied without a mounting hole, so secure clamping is achieved using the appropriate holder, underlay and clamping set. Practical workshop advantages: uptime and surface quality A 1.6 mm corner radius gives robust edge strength for interrupted cuts and improves load distribution, while the rhombic form supports versatile cutting angles. These attributes translate into fewer tool changes and more predictable component quality — clear advantages for job shops and production lines aiming to reduce downtime and maintain consistent results. The ISO-system approach also means straightforward stocking and fast replacement, which keeps set‑ups quick and predictable. For tailored machining recommendations or to request technical documentation for the Tungaloy LX11 CNGN120716‑T1 insert, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on holder compatibility and optimal cutting parameters. Technical data Article number: 6801901 Manufacturer: Tungaloy Manufacturer SKU: TUN6801901 Model series: ISO turning inserts Designation: CNGN120716‑T1 LX11 Core data ISO code: 120716 Insert size: 12 mm Thickness: 7.94 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Special features Material: carbide Grade: LX11 (Tungaloy) Chipbreaker: T1 Shape: rhombic Hole: without hole Application: turning System: ISO insert requiring suitable holder, underlay/clamping set and replacement screws FAQ Which machining operations is this insert suitable for? The CNGN120716‑T1 LX11 insert is intended for external and internal turning; select the chipbreaker and grade to suit workpiece material and machining stability. How is compatibility with holders ensured? Compatibility depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness to the holder; the CNGN geometry fits ISO CNGN pockets when these parameters align. What advantages does the LX11 grade provide? LX11 is a Tungaloy carbide grade that delivers a balance of wear resistance and toughness, supporting stable cutting edges and consistent tool life in turning applications. What effect does the T1 chipbreaker have on machining? The T1 chipbreaker controls chip formation for predictable evacuation, improving surface finish and reducing the risk of chip-related interruptions. Does the insert have a mounting hole? The CNGN120716‑T1 is supplied without a mounting hole and is held securely by the compatible holder, underlay and clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120716 TS200 Wendeplatten - Tungaloy
The combination of TS200 grade and cemented carbide construction ensures robust wear resistance and stable cutting-edge performance for both external and internal turning; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CNGN 120716 TS200 — Tungaloy Turning Insert, ISO Rhombic 80°, r1.6 The CNGN120716-T1 TS200 turning insert is an ISO‑standard rhombic insert designed for versatile external and internal turning where a balance of wear resistance and edge stability is required. ISO‑standard rhombic turning insert TS200 grade for balanced wear and toughness Corner radius r1.6 mm for edge strength Chipbreaker T1 for controlled chip formation Consistent productivity through material and grade The TS200 grade, combined with cemented carbide, delivers a careful balance of wear resistance and toughness that supports longer tool life and fewer interruptions in production. In practice, this means steadier component quality over extended runs and reduced tool-change frequency. The insert’s substrate and grade are tuned to maintain a stable cutting edge under typical turning loads, helping to secure predictable machining results and reduced scrap rates. Geometry engineered for reliable compatibility The ISO‑designation and rhombic shape with an 80° included angle provide mechanical stability and versatile approach angles for many turning operations. A corner radius of 1.6 mm increases edge robustness and helps absorb intermittent cutting forces, while the 0° clearance angle suits a range of holder geometries. Compatibility with a turning toolholder is determined by form, clearance, tolerance class, fastening method, size and thickness, so pairing with an appropriate external holder or boring bar yields best results. Controlled chip formation and application guidance The T1 chipbreaker geometry is intended for general turning tasks where predictable chip control improves cycle times and surface finish. For external and internal turning, select the chipbreaker and grade to match workpiece material, machining strategy and machine stability; the TS200 selection offers broad applicability and a pragmatic compromise between resistance to wear and edge integrity. If milling or non‑turning operations are required, choose purpose‑specific geometries instead. For reliable productivity with Tungaloy TS200 inserts, contact Metav Werkzeuge for purchase and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6153628 Manufacturer SKU: TUN6153628 Vendor SKU: 6153628-Tungaloy Dimensions & measurable data Insert designation: CNGN120716-T1 Size: 12 mm Plate thickness: 7.94 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 80° Materials & special features Material: Carbide (cemented carbide) Grade/coating: TS200 (Tungaloy) Chipbreaker: T1 Plate shape: Rhombic, without hole Application: Turning (external and internal) System setup: ISO insert, matching holder and clamping set required FAQ What turning applications suit this insert best? The CNGN120716-T1 TS200 insert is designed for both external and internal turning where a balanced wear resistance and edge stability are required. Which materials is the TS200 grade intended to machine? TS200 is a Tungaloy grade engineered to offer broad workpiece coverage by combining wear resistance and toughness, making it suitable for a wide range of steels and general turning tasks. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius increases edge strength and improves resistance to chipping, delivering greater robustness during interruptive cuts and helping to maintain surface quality. Is this insert compatible with standard ISO holders? The insert follows ISO dimensions; compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness—use a matching ISO external holder or boring bar for secure clamping. What role does the T1 chipbreaker play? The T1 chipbreaker promotes controlled chip formation for reliable evacuation and consistent surface finish in general turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGN 120720 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, LX11 wear‑resistant grade, and a robust carbide substrate for reliable external and internal turning. Order the insert directly via Metav Werkzeuge or consult our advisers for holder compatibility and process optimisation. CNGN120720 LX11 CNGN Turning Insert — ISO rhombic 80° (Tungaloy) A CNGN120720 LX11 indexable turning insert designed for ISO‑conforming external and internal turning applications, offering a rhombic 80° shape and a 0° relief angle for predictable cutting behaviour. ISO rhombic insert CNGN form Corner radius 2 mm for stable edges LX11 grade for wear resistance Carbide substrate for long tool life Consistent cutting geometry for repeatable results The rhombic CNGN shape with an included angle of 80° delivers a predictable engagement with the workpiece, which contributes to steady cutting forces and uniform chip formation. The 0° relief angle is defined to suit a wide range of turning operations, while the corner radius of 2 mm supports robust cutting edges that resist premature chipping. These geometric details translate into shorter set‑up times and more consistent part quality when the insert is used in appropriate ISO holders. Robust grade and substrate for extended productivity The LX11 grade, developed by Tungaloy, combines wear resistance and edge toughness to withstand interrupted cuts and varied material families. Backed by a carbide substrate, the insert maintains cutting performance over longer tool life compared with less wear‑resistant grades. The result is a reduced need for frequent insert changes and a higher overall productivity in batch turning or continuous production. Clear guidance on compatibility and application Compatibility with a chosen holder depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation ensures straightforward matching to standard toolholders. The insert is intended for turning and suits both external and internal turning tasks when the insert geometry, grade and cutting data are aligned with the workpiece material. Where chip control is critical, select a chipbreaker or grade appropriate to the material and process, noting this specific variant is supplied without a chipbreaker. Practical benefits in the workshop and on the shop floor Using a standardised ISO insert such as this reduces tooling complexity and simplifies inventory management. The combination of a rhombic form, 2 mm corner radius and LX11 composition supports robust machining of a broad range of steels and common alloyed materials, helping to increase uptime and stabilise part tolerances. For operators less familiar with insert selection, the predictable performance of an ISO‑conforming insert eases process transfer between machines and operators. Contact Metav Werkzeuge today for application advice on Tungaloy turning inserts or to confirm holder compatibility and delivery options. Technical data Article number: 6801902 SKU: 6801902-Tungaloy Manufacturer SKU: TUN6801902 Brand: Tungaloy Numbers / Core technical data Shape angle: 80° Relief angle: 0° Size designation: 12 Thickness: 7.94 mm Corner radius: 2 mm Designs / Special features Grade: LX11 Substrate: carbide Model series: ISO‑indexable turning inserts Intended application: turning (external and internal) Chipbreaker: none Mounting: compatibility by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The LX11 grade on a carbide substrate is formulated for broad material coverage; the insert is suitable for machining steels and many common alloyed materials when cutting data are adjusted accordingly. How does the 0° relief angle affect cutting performance? A 0° relief angle provides a neutral clearance suited to a variety of turning tasks; it delivers predictable engagement and is compatible with ISO holders specified for this geometry. Is a chipbreaker included with this variant? This specific CNGN120720 LX11 insert is supplied without a chipbreaker; chip control should be addressed through grade selection or alternative insert styles where required. Which holder features must be checked for compatibility? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the chosen ISO holder matches these criteria. What is the manufacturer article number and SKU? The manufacturer article number is 6801902 and the SKU is 6801902‑Tungaloy for ordering and inventory reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGR 32T15- AH976 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH976 for enhanced wear and chipping resistance, the ISO CNGR form for secure holder compatibility, and precise geometry for consistent surface quality — order directly via Metav Werkzeuge or ask the consultants for application support. CNGR 32T15- AH976 turning insert — PVD-coated carbide, rhombic 32, by Tungaloy CNGR32T15- AH976 is an ISO-standard rhombic turning insert designed for reliable external and internal turning in production environments. PVD-coated carbide AH976 for wear resistance ISO CNGR rhombic, size 32 0° clearance with 80° cutting angle Single-sided chipbreaker for controlled chips Reliable edge life and measurable process security The PVD-coated AH976 grade delivers a wear- and breakage-resistant cutting edge that is engineered for sustained performance in repetitive turning tasks. As an ISO-standard insert, it ensures predictable interchangeability: compatibility with a holder is defined by the insert's form, clearance angle, tolerance class, fastening method, size and thickness. This standardisation reduces setup variability and supports reproducible cycles, translating into lower process variation and improved overall equipment effectiveness. The use of carbide and a hard, PVD surface layer contributes directly to longer tool life and consistent component tolerance. Geometry tuned for stable cutting and consistent chip control The rhombic form with an 80° main cutting angle and 0° clearance is optimised for stability in both facing and light-depth turning. The 1.59 mm plate thickness and the single-sided chipbreaker promote controlled chip formation and reduced vibration, which benefits surface finish and dimensional accuracy. Selecting the correct chipbreaker and grade for the workpiece material and machining conditions improves throughput and reduces unplanned downtime by limiting edge chipping and unexpected insert failures. Clear identification of the insert geometry simplifies holder selection and clamping, ensuring a secure interface between insert and toolholder. Practical application guidance and integration into the production line This insert is intended primarily for turning operations where a sharp, secure cutting edge and process reliability are required. The insert is supplied without a hole and is compatible with holders and boring bars that match the CNGR form and the 32T15- ISO designation. When integrating into a production line, choose a holder that matches the insert's tolerance class and fastening type to maintain clamping stability. For abrasive or interrupted cuts, the robust PVD coating and the AH976 substrate provide additional protection against flank wear and chipping, supporting higher uptime and predictable maintenance intervals. For application advice, availability and delivery coordination for Tungaloy AH976 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultants are available to recommend the optimal chipbreaker and holder match for the intended turning tasks Technical data Article number: 6801904 Manufacturer SKU: TUN6801904 Item label: CNGR32T15- AH976 Tungaloy-Wendeplatte Key specifications Size: 32 Thickness: 1.59 mm Clearance angle: 0° Cutting angle: 80° Special features Grade/coating: AH976, PVD-coated carbide Plate form: rhombic Chipbreaker: single-sided Hole: none Model series: ISO turning inserts Material: carbide FAQ What holder features are required for safe use of this insert? Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness; the CNGR form and 32T15- designation guide correct holder selection for the CNGR32T15- AH976 insert. Which operations is this insert suited for? The insert is designed for external and internal turning where a sharp edge and process security are required; its PVD-coated AH976 grade supports wear resistance during repetitive turning. How does the AH976 coating benefit machining performance? AH976 is a PVD-coated carbide grade that increases resistance to wear and chipping, providing longer edge life and more consistent surface quality under typical turning conditions. Is the insert supplied with a central hole for screw clamping? No — this insert is supplied without a hole and must be used with a compatible holder that secures the insert by the appropriate clamping method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGX 120712 FX105 Wendeplatten - Tungaloy
Benefit from the combination of FX105 grade robustness, carbide construction and a precise R1.2 corner radius for reliable surface quality and long tool life; secure stock or request advice from Metav Werkzeuge to ensure optimal process integration. CNGX 120712 FX105 CNGX — Turning insert for ISO applications (Tungaloy) CNGX 120712 FX105 — an ISO‑standard rhombic insert engineered for external and internal turning with a pronounced focus on edge stability and wear resistance. ISO‑standard CNGX120712 insert FX105 grade for wear resistance Corner radius R1.2 for stable cutting Suitable for external and internal turning Consistent chip formation and tool life for productive turning The FX105 grade is a Tungaloy‑developed carbide composition that balances wear resistance and toughness, helping to extend service intervals in many turning tasks. The special chipbreaker configuration supports predictable chip formation, which reduces interruptive manual chip handling and maintains consistent surface finish. For process planners, the result is fewer tool changes and steadier production output, especially where repeatable dimensional quality matters. Precise fitting and predictable performance in ISO holder systems Compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; this insert conforms to the ISO geometry family for straightforward selection. The rhombic shape and standardised dimensions allow simple substitution into existing ISO‑compliant toolholders, while the 0° relief contributes to defined contact conditions between insert and workpiece. This clarity in mounting reduces setup time and supports stable cutting conditions across batch runs. Carbide construction and geometry tuned for versatile turning Made from solid carbide, the insert offers the mechanical foundation required for finishing and general turning operations. The R1.2 corner radius enhances edge strength, which improves resistance to chipping under intermittent cuts and when machining less stable setups. Given its specification, the insert is well suited to both external and internal turning applications where a balance of surface quality and tool life is required, particularly on a wide range of steel and alloyed materials. Contact Metav Werkzeuge for application advice and stock availability of the original Tungaloy CNGX 120712 FX105 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6815363 Manufacturer article number: 6815363 Manufacturer SKU: TUN6815363 SKU: 6815363-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: CNGX120712 Grade: FX105 Manufacturer: Tungaloy Application: Turning Plate shape: rhombic Plate size: 12 Plate thickness: 7.94 Facts Corner radius: 1.2 mm Relief angle: 0° Angle: 80° Plate thickness: 7.94 mm Plate size: 12 Special features Material: carbide Special chipbreaker Special hole and hole style Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness Intended for external and internal turning FAQ What materials is this insert suited for? The CNGX 120712 FX105 insert is designed as a general turning solution; the FX105 grade offers broad workpiece coverage, making it suitable for many steels and alloyed materials encountered in workshop turning. How does the R1.2 corner radius affect machining? A corner radius of 1.2 mm increases edge strength and improves resistance to chipping, which enhances surface integrity during finishing passes and under less rigid cutting conditions. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO‑standard geometry (CNGX120712) and is compatible with ISO‑compliant holders provided the holder matches the form, relief angle, tolerance class, fastening method, size and thickness. Does the FX105 grade require special cutting data? Cutting data depend on workpiece material and machine stability; the FX105 grade is engineered for a balance of wear resistance and toughness, reducing the need for conservative parameters in many turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNGX 120716 FX105 Wendeplatten - Tungaloy
Benefit from the combination of FX105 wear resistance, precise 80° rhombic geometry and a 1.6 mm corner radius for reliable external and internal turning; order directly via Metav Werkzeuge or consult our advisers for application-specific guidance. CNGX 120716 FX105 indexable turning insert — Tungaloy CNGX 120716 FX105 is an ISO‑compliant indexable insert designed for external and internal turning, combining a robust Tungaloy grade with a rhombic form for stable cutting performance ISO‑compliant rhombic geometry, 80° cutting angle FX105 Tungaloy grade with wear resistance Corner radius 1.6 mm for consistent finishes Plate thickness 7.94 mm for stable cutting Longer running life with predictable tool performance The FX105 cemented‑carbide grade delivers a balanced combination of wear resistance and edge toughness, which reduces insert change frequency and supports steady production rates. As an ISO‑standard insert, the component is optimised for repeatable seating and stable chip formation, helping to lower cycle variability in series turning. Clear technical choice of grade and chipbreaker reduces unscheduled downtime and contributes to a measurable improvement in throughput. Secure seating and dimensional accuracy for repeatable results ISO standardisation means compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; the rhombic shape with an 80° principal cutting angle and a 0° clearance angle ensures predictable engagement with external holders and boring bars. The 7.94 mm plate thickness and defined tolerance class improve clamping stability and reduce micro‑vibration, which benefits dimensional repeatability and surface quality on both external and internal operations. Improved surface quality and efficient chip control A corner radius of 1.6 mm provides a balance between edge strength and surface finish, while the special chipbreaker configuration supports controlled chip flow in a variety of turning conditions. Choosing the correct chipbreaker and the FX105 grade according to workpiece material and operation reduces burr formation and rework. The combined effect is fewer secondary operations and more consistent part finishing, particularly where repeatable surface requirements are critical. System integration and practical application notes The insert functions as part of a system that includes the ISO indexable plate, a matching external holder or boring bar, suitable backing/ clamp sets and replacement screws. Compatibility with a chosen holder must be checked against form, free angle, attachment method, size and thickness to ensure proper clamping. For applications where material, cut depth or stability varies, matching chipbreaker and grade to the operation optimises tool life and process security; expert advice is available for setup and selection. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts and to determine the optimal chipbreaker and holder combination: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6815364 Manufacturer SKU: TUN6815364 Our SKU: 6815364-Tungaloy Model series: ISO indexable turning inserts Material: cemented carbide Facts ISO designation: 120716 Insert designation: CNGX 120716 Corner radius: 1.6 mm Insert size: 12 Plate thickness: 7.94 mm Cutting angle: 80° Clearance angle: 0° Special features Grade: FX105 (Tungaloy) Shape: rhombic Hole style: special Chipbreaker: special Intended application: turning System components: insert, holder/boring bar, backing/clamp set, screws FAQ What materials is this insert intended for? The FX105 grade in the CNGX 120716 insert is engineered for general turning tasks; selection of the chipbreaker and cutter grade should be matched to the specific workpiece material and machining parameters to achieve optimal results. How does the 1.6 mm corner radius affect cutting? A 1.6 mm corner radius increases edge strength and contributes to a consistent surface finish; it is particularly suitable where a balance of finish and edge durability is required. Is the insert compatible with standard ISO holders? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the CNGX 120716 is ISO‑specified, so matching a holder with the corresponding seat and clamp arrangement ensures correct fit and performance. What are the main benefits of the FX105 grade? The FX105 cemented‑carbide grade provides increased wear resistance and good edge stability, supporting longer tool life and predictable performance in turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMA 090404 T515 Wendeplatten - Tungaloy
Optimise production with a cost‑efficient, CVD‑coated carbide grade that delivers consistent chip control and long tool life for cast iron turning. Order the insert directly via Metav Werkzeuge or ask consultants for holder compatibility and process setup. CNMA 090404 T515 — ISO turning insert for cast iron, Tungaloy The CNMA 090404 T515 is an ISO rhombic turning insert designed for efficient external and internal turning of cast iron components. ISO rhombic insert CNMA 090404 CVD‑coated carbide grade T515 Suited for cast iron machining 0.4 mm corner radius, 80° cutting angle Productivity gains with a CVD‑coated grade built for cast iron The CVD‑coated carbide grade T515 combines a wear‑resistant coating with a substrate engineered for stable cutting under interrupted and continuous cuts in cast iron. This configuration increases usable tool life and reduces the frequency of insert changes, translating into measurable cycle‑time savings on repetitive turning operations. The insert’s coating improves edge strength at elevated temperatures, allowing moderately higher cutting speeds while maintaining dimensional consistency and surface quality. The result is improved process economy and predictable performance in series production. Interchangeability and secure clamping for fast changeovers Designed to ISO dimensions, the rhombic insert ensures straightforward replacement across compatible holders. The geometry with an 80° main cutting angle and a 0° relief gives robust engagement for heavy cuts, while the 0.4 mm corner radius balances strength and edge roundness for both roughing and light finishing passes. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the insert is supplied with a cylindrical hole to suit conventional clamping systems. Choosing the correct holder and mounting torque keeps the insert seated securely and reduces vibration, which in turn extends tool life and improves surface finish. Practical advantages for workshop and production environments The plate thickness of 4.76 mm and ISO designation ensure mechanical stability in demanding cut conditions. With no chipbreaker, selection of an appropriate cutting geometry and feed rate is key to achieving controlled chip formation; this approach is often preferred when bespoke chip management strategies are applied or when machining complex cast iron alloys. The ISO‑normed shape and clear specification simplify inventory management and make the insert a dependable choice for jobbing shops and production lines seeking reproducible results with minimal setup time. Contact Metav Werkzeuge for tailored advice on Tungaloy T515 inserts and to confirm holder compatibility — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6760156 Manufacturer SKU: TUN6760156 SKU: 6760156-Tungaloy Model series: ISO turning inserts Designation: CNMA090404 T515 Material: carbide Core data Corner radius: 0.4 mm Main cutting angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 09 Special features CVD‑coated carbide, grade T515 For cast iron machining With cylindrical hole No chipbreaker ISO‑compliant rhombic geometry Suitable for external and internal turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for finishing work in cast iron? In many cases yes; the CNMA 090404 T515 insert (SKU 6760156‑Tungaloy) can be used for light finishing, though feed and depth of cut should be adapted to achieve the required surface finish. Which holder type is required for the CNMA 090404 T515? The insert is ISO‑normed and fits holders defined for CNMA‑type plates; selection of the correct holder must match form, relief angle, tolerance class, fastening and plate thickness. Does the T515 grade perform well with interrupted cuts? The CVD‑coated T515 grade is designed for stable chip formation and offers good performance under interrupted cutting typical of cast iron turning. How does the absence of a chipbreaker affect machining? With no chipbreaker on the plate, chip control relies on cutting parameters, tool overhang and the chosen holder; this can be advantageous where custom chip evacuation strategies are used. What does the ISO code 090404 mean for this insert? The ISO code indicates plate size and geometry; CNMA 090404 describes the rhombic shape, size 09 and the corner configuration — CNMA090404 T515 details can be cross‑referenced with holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMA 090408 T515 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide for economical machining, a robust 0.8 mm corner radius for improved edge life, and ISO conformity for straightforward toolholder compatibility — order the insert directly via Metav Werkzeuge or consult their specialists for application support. CNMA090408 T515 indexable insert for turning by Tungaloy — CVD-coated carbide, 80° geometry CNMA090408 T515 is an ISO‑normed turning insert designed for efficient machining of cast iron; the rhombic shape and cylindrical hole ensure secure clamping in standard holders. CVD-coated carbide for cast iron machining 80° rhombic geometry for stable cutting 0.8 mm corner radius for increased edge strength No chipbreaker for continuous cutting conditions Consistent, economical cutting performance for cast iron The CVD-coated carbide grade T515 combines wear resistance with attractive cost-efficiency, enabling economical machining of cast iron components. The coating promotes stable chip formation and extends tool life, which reduces tool changes and machine downtime. Compatibility with ISO toolholders is governed by form, clearance, tolerance class, fixing method, size and thickness; this standardisation simplifies tool inventory and supports reproducible process results. The rhombic geometry and 80° included angle provide a reliable compromise between cutting edge strength and access to profiles. Secure clamping and reliable surface quality in turning operations The insert’s cylindrical hole and defined tolerance ensure positive location and clamping force in compatible holders, yielding repeatable cutting geometry and consistent surface finish. A 0° clearance angle supports full-face engagement where required, while the 0.8 mm corner radius balances edge robustness with the ability to achieve the required workpiece contours. Where stability and interrupted cuts are a concern, choose an appropriate holder and feed rate to preserve edge life; the plate’s ISO geometry eases selection of matching toolblocks and boring bars. Application guidance for productive machining results Designed for external and internal turning, this insert performs best in stable setups and continuous cutting; the absence of an integrated chipbreaker means its strengths lie in steady material removal rather than aggressive chip control in highly interrupted cuts. For cast iron workpieces, select cutting data that reflect machine rigidity and workpiece support to exploit the insert’s T515 wear characteristics. Metav Werkzeuge can advise on holder matches, clamping sets and replacement screws within the defined ISO system to ensure rapid integration into production and predictable output. For tailored advice on integrating this Tungaloy insert into an existing turning process, contact Metav Werkzeuge for technical consultation and ordering support. Technical Data Article number: 6760157 Manufacturer SKU: TUN6760157 SKU: 6760157-Tungaloy Brand: Tungaloy Core specifications Geometry: CNMA 09 04 08 Included angle: 80° Corner radius: 0.8 mm Clearance angle: 0° Thickness: 4.76 mm Materials & special features Material: carbide Coating/sort: T515 (CVD-coated carbide) Application: turning, economical machining of cast iron Plate form: rhombic, size 09 Hole: with cylindrical hole Chipbreaker: without FAQ What materials is this insert best suited for? The CNMA090408 T515 insert is optimised for machining cast iron; the T515 CVD coating supports stable chip formation and extended tool life when turning such materials. Which toolholders are compatible with this insert? Compatibility is determined by the ISO geometry (CNMA 09 04 08), form, clearance angle and thickness; use holders and boring bars specified for ISO CNMA inserts and match the 80° rhombic configuration. Does the insert include a chipbreaker? This grade is supplied without a chipbreaker, so it is intended for continuous turning conditions; for heavy interruptions, consider inserts with dedicated chip control geometries. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius increases edge strength and resistance to chipping while maintaining an acceptable surface finish for many turning tasks, offering a balance between durability and profile accuracy. Can Metav Werkzeuge supply matching clamping sets and screws? Metav Werkzeuge can advise on and supply the correct underplates, clamping sets and replacement screws to ensure secure mounting and repeatable results with this Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 090412 T515 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, CVD‑coated carbide performance and a robust corner radius for stable production in cast iron turning; order the insert via Metav Werkzeuge or request application advice from the technical team. CNMA090412 T515 Tungaloy indexable insert for turning — CVD‑coated carbide, rhombic form The CNMA090412 T515 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for cast iron machining. ISO CNMA 090412 rhombic insert CVD‑coated carbide grade T515 Corner radius 1.2 mm for robust cutting With cylindrical hole and 80° included angle Consistent results for cast iron turning The ISO CNMA090412 geometry provides a predictable contact zone that promotes stable chip formation when turning cast iron. The rhombic shape and corner radius 1.2 mm reduce the risk of edge chipping under interrupted cuts, which leads to longer tool life and fewer insert changes. By choosing a grade matched to workpiece stability and cutting speed, the machining process becomes more cost‑effective: fewer stoppages and consistent dimensional results support higher throughput without compromising surface quality. Coating and material for reliable wear resistance A CVD‑coated carbide substrate underpins the insert’s resistance to abrasive wear and thermal loading during continuous turning operations. The T515 grade combines wear tolerance with economy, making it suitable where a balance of performance and cost is required. The coating improves heat management at the cutting edge, which helps to maintain a uniform surface finish and extends the service interval of the cutting edge compared with uncoated grades. This means fewer tool changes and a steadier process in repetitive production runs. System compatibility for straightforward integration Compatibility with toolholders is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The insert follows ISO conventions for holders and clamping, enabling straightforward integration into existing tool systems and reducing setup complexity. The presence of a cylindrical hole and the standard plate dimensions facilitate reliable fixation and repeatable positioning, which in turn minimises setup errors and helps to maintain process stability across batches. Practical guidelines for efficient turning operations The insert is supplied without a chipbreaker, so the selection of a matching chip control geometry should be considered according to the machining task and material condition. For heavy interrupted cuts or unstable setups the 80° included angle and the 1.2 mm corner radius provide robustness; for finer finishing passes a softer engagement or a smaller radius insert would be appropriate. This indexable solution supports both external and internal turning tasks and is particularly effective when paired with a holder and clamping set suited to the chosen cutting parameters. For availability, recommended cutting data and application support, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to request stock and process consultation. Technical data Article number: 6760158 Manufacturer SKU: TUN6760158 Vendor SKU: 6760158-Tungaloy Model series: ISO turning indexable inserts Facts Size: 09 Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD‑coated (T515) Plate form: rhombic Chipbreaker: none Application: turning (external and internal) Compatible with ISO‑standard holders FAQ What materials is this insert best suited for? The CNMA090412 T515 insert is formulated for economical machining of cast iron; the CVD‑coated carbide offers good wear resistance and chip behaviour for these materials. Is the insert compatible with standard CNMA holders? Yes, the insert follows ISO CNMA dimensions and is compatible with holders designed for CNMA 090412 inserts, provided form, clearance and clamping match the holder specifications. Does this variant include a chipbreaker? The supplied CNMA090412 T515 insert is without a chipbreaker; chip control should be addressed via holder choice or by selecting an insert grade with integrated chip control where required. What is the advantage of the 1.2 mm corner radius? A corner radius of 1.2 mm increases edge robustness under interrupted cuts and enhances tool life in applications where stability and moderate feed rates are required. How should cutting data be adapted for this grade? Cutting data should be selected based on workpiece condition and machine stability; the T515 grade supports moderate to high cutting speeds for cast iron while prioritising wear resistance and consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 090416 T515 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T515 and the ISO CNMA 090416 format for productive, cost-effective turning of cast iron; the rhombic design with a 1.6 mm corner radius and 4.76 mm thickness gives stable cutting and predictable tool life. Order directly via Metav Werkzeuge or consult the team for selection guidance. CNMA 090416 T515 CNMA turning insert — Tungaloy CNMA 090416 T515 is an ISO-standard rhombic turning insert designed for economical machining of cast iron in general turning operations ISO CNMA insert 090416 format CVD-coated carbide grade T515 for cast iron Rhombic 09 shape with 80° angle Central cylindrical hole for secure clamping Productive, economical machining of cast iron with predictable tool life The combination of a CVD-coated carbide substrate and the T515 grade yields a balance between wear resistance and edge stability, tailored for economic turning of cast iron. The insert’s rhombic shape (09) and 80° approach angle provide a broad contact area for stable cutting forces, while the 1.6 mm corner radius improves edge strength for heavier feeds. Thanks to the 4.76 mm thickness, the insert offers reliable seat stability in compatible holders; this reduces vibrations and supports steady metal removal rates. For users seeking reproducible component quality, the material pairing and geometry reduce the frequency of tool changes and help maintain cycle-time targets. Secure clamping and straightforward ISO compatibility to speed setup Compatibility with a toolholder depends on form, 0° clearance angle, tolerance class, attachment style, size and thickness; the central cylindrical hole on this insert ensures positive seating and reliable clamp engagement. The ISO CNMA format simplifies holder selection because dimensional standards are maintained across manufacturers; this makes integration into existing turning tool systems quick and predictable. In workshops where set-up time is critical, the standardised interface reduces adjustment effort and supports repeatable indexation. For interrupted cuts or unstable setups, selection of a holder with appropriate rigidity is advised to exploit the insert’s mechanical benefits. Selection guidance and practical implications of the geometry This insert is supplied without a chipbreaker, which should be considered when planning the machining strategy: smooth, continuous chips may be expected under steady cutting conditions, whereas a dedicated chip-control geometry could be required for certain interrupted or lightweight cuts. The T515 grade is intended for broad material coverage within cast irons; choose the grade and cutting data according to component stability and desired cutting speed to maximise performance and process economy. Tool life benefits are most apparent when cutting parameters are matched to the combination of workpiece rigidity and the insert’s edge geometry. Integration into modular turning systems and maintenance notes A typical system comprises the ISO indexable insert, a matching external holder or boring bar, a shim or clamping set and replacement screws; this insert’s standardised dimensions facilitate stocking of spares and simplify preventative maintenance planning. The CVD coating provides surface hardness and thermal resistance that improve wear behaviour at elevated cutting temperatures, while the substrate core maintains toughness. For engineering teams organising tool inventories, consolidating on ISO formats like CNMA 090416 reduces complexity and supports lean tool management. For specific cutting data or to confirm holder compatibility, technical consultation is recommended. Contact Metav Werkzeuge for tailored selection advice and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application requirements and to order the suitable insert for the production task Technical data Article number: 6760159 Manufacturer SKU: TUN6760159 SKU: 6760159-Tungaloy Facts Corner radius: 1.6 mm Thickness: 4.76 mm Size: 09 Approach angle: 80° Relief angle: 0° Hole: cylindrical Special features Material: Carbide (CVD-coated) Grade: T515 Shape: Rhombic Chipbreaker: none Application: Turning, cast iron FAQ What materials is this insert best suited for? This CNMA 090416 T515 insert is optimised for machining cast iron; the T515 grade and CVD-coated carbide composition provide a suitable balance of wear resistance and edge stability for economic cast-iron turning. How does the rhombic shape affect cutting behaviour? The rhombic 09 shape with an 80° approach angle delivers a wide contact area and good edge support, which helps stabilise cutting forces and improves performance during external and internal turning operations. Is a specific holder required for this ISO insert? The insert fits ISO-compatible CNMA toolholders; compatibility depends on form, clearance, tolerance class, attachment method, size and thickness, and the central cylindrical hole ensures secure clamping in appropriate holders. What does "without chipbreaker" mean for chip control? An insert marked as without chipbreaker produces continuous chips under steady cuts; for enhanced chip control in certain conditions, a dedicated chip-control geometry or holder modification may be necessary. How should cutting data be chosen for this grade? Cutting parameters should be selected based on workpiece rigidity, the T515 grade intended for cast iron, and the machining strategy (continuous vs interrupted cuts) to balance tool life and productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120404 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T5105, a 0.4 mm nose radius and ISO CNMA geometry for productive, high‑speed turning of cast iron under stable conditions; order via Metav Werkzeuge or consult the sales engineers for application support. CNMA 120404 T5105 — Turning insert (ISO CNMA) by Tungaloy, CVD‑coated carbide for high‑speed cast iron machining CNMA120404 T5105 is an ISO‑standard rhombic indexable turning insert designed for external and internal turning applications, optimised for high‑speed machining of cast iron under stable setups CVD‑coated carbide for high‑speed machining ISO rhombic CNMA geometry, 80° cutting angle 0.4 mm nose radius for fine profiles Cylindrical through‑hole for secure clamping Consistent productivity through tailored grade and coating The combination of the T5105 CVD‑coated carbide and the insert’s geometry delivers reliable performance for continuous turning operations. The chemical vapour deposition layer enhances wear resistance and keeps the cutting edge stable at elevated cutting speeds, which helps maintain longer tool life and consistent component quality. For shops processing cast iron, the mix of coating and substrate reduces flank wear and fosters predictable tool change intervals, supporting efficient production planning. Predictable machining results from controlled geometry The CNMA‑format rhombic shape with an 80° cutting angle and 0° clearance creates a stable cutting engagement that benefits both external and internal turning. The 0.4 mm nose radius balances surface finish and edge robustness: small enough for accurate profile work, yet generous enough to resist premature chipping when the setup is rigid. The standardised ISO geometry also means compatibility with a wide range of holders, with the fit determined by form, clearance angle, tolerance class, fastening method, size and thickness. Mounting, compatibility and clamping guidance for reliable changeovers This insert features a cylindrical through‑hole which enables secure clamping in holders designed for hole‑fixation. Compatibility depends on the holder’s seat and clamp system; ensure the toolholder matches the insert form, thickness (4.76 mm) and fastening method for repeatable positioning. The insert is supplied in the ISO indexable turning insert family and integrates into a system consisting of an external holder or boring bar, a shim/clamp set and replacement screws, simplifying inventory and changeovers in production environments. Application advice and selection criteria for best results Choose the T5105 grade and an appropriate chipbreaker according to workpiece material, cutting mode and machine stability: while this grade is optimised for cast iron and high speeds under stable conditions, different chip control geometries or grades may be preferable for interrupted cuts or less rigid setups. The absence of an integrated chipbreaker in this item places emphasis on matching the right breaker geometry where necessary to ensure safe chip evacuation and surface quality. Contact Metav Werkzeuge for technical matching, availability and to secure Tungaloy CNMA 120404 T5105 inserts for optimised turning performance Technical data Article number: 6850123 Manufacturer SKU: TUN6850123 SKU: 6850123-Tungaloy Designation: CNMA120404 T5105 Tungaloy indexable insert Dimensions & core data Inscribed circle / size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Lead / cutting angle: 80° Clearance angle: 0° Hole: cylindrical through‑hole Materials & special features Substrate: carbide Grade / coating: T5105 (CVD‑coated carbide) Plate shape: rhombic (CNMA) Series: ISO indexable turning inserts Application: turning Chipbreaker: none FAQ What materials is the CNMA120404 T5105 best suited for? The CNMA120404 T5105 insert is optimised for high‑speed machining of cast iron; the T5105 coating and carbide substrate support stable abrasive wear conditions typical for these materials. Does the insert include a chipbreaker and how does that affect use? This CNMA120404 T5105 insert is supplied without an integrated chipbreaker; chip control should therefore be addressed by selecting a suitable breaker geometry or adapting cutting parameters when necessary. How is the insert clamped in the holder? The CNMA120404 T5105 features a cylindrical through‑hole for clamping; secure fixation requires a compatible holder and clamp set that matches the insert form, thickness and ISO CNMA seating. Can the insert be used for internal turning as well as external turning? Yes, the ISO rhombic CNMA geometry of the CNMA120404 T5105 supports both external and internal turning applications when used with the appropriate boring bar or holder. What are the dimensional key points to check before fitting the insert? Verify the insert size (12 mm), thickness (4.76 mm), nose radius (0.4 mm) and the ISO CNMA form to ensure the holder provides correct seating and repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120404 T5115 Wendeplatten - Tungaloy
Reliable turning performance is achieved with the CVD‑coated T5115 carbide grade and the ISO CNMA geometry, delivering stable cutting in cast‑iron applications; the 0.4 mm corner radius and 80° insert angle help ensure consistent surface quality and tool life. Order directly via Metav Werkzeuge or ask their consultants for holder compatibility and ordering information. CNMA 120404 T5115 turning insert for turning by Tungaloy CNMA120404 T5115 is an ISO‑format indexable turning insert designed for efficient external and internal turning of cast iron, combining a CVD coating with a balanced carbide substrate for reliable edge stability. ISO‑standard CNMA geometry CVD‑coated carbide grade T5115 Suitable for cast‑iron machining 0.4 mm corner radius, 80° cutting angle Consistent tool life through a CVD‑coated carbide grade The combination of a CVD‑coated surface and a robust carbide substrate in this insert offers a predictable wear curve and improved resistance to abrasion compared with uncoated grades. The T5115 specification provides a balance between edge stability and wear resistance, making it suitable for longer tool life in interrupted cuts and varying cast‑iron compositions. For shop floors where repeatability and reduced tool changes matter, the coating helps maintain cutting performance and reduces unexpected downtime. ISO geometry for straightforward holder matching and setup Built to the ISO CNMA form, the insert’s profile, relief angle and tolerance class ensure compatibility with a broad range of standard external holders and boring bars. Correct alignment relies on matching the insert’s form, relief angle (0°), thickness (4.76 mm) and fastening arrangement; when these match the holder specifications, clamping stability and repeatable positioning follow. This standardisation simplifies tooling logistics and minimises setup time, supporting a smoother production flow. Practical advantages on workpieces and surface quality With a 0.4 mm corner radius and a nominal 80° included angle, the geometry favours stable cutting forces and predictable component geometry, helping to produce a consistent surface finish on cast‑iron parts. The insert is supplied without a chipbreaker, allowing the selection of the most suitable chip control solution for the machine rigidity and cutting conditions. Where vibration control and chip evacuation are critical, choosing an appropriate holder or a matched chipbreaker will enhance the overall productivity and final component quality. For tailored advice on holder compatibility and to procure genuine Tungaloy CNMA inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — their consultants can confirm fitment and availability Technical Data Manufacturer article number: 6850124 Vendor SKU: 6850124-Tungaloy Manufacturer SKU: TUN6850124 Designation: CNMA120404 Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 80° Special features Material: carbide Coating: CVD (T5115 grade) Shape: rhombic Mounting: cylindrical hole Chipbreaker: none Application: turning; suited for cast iron FAQ Is this insert suitable for machining cast iron? This CNMA120404 T5115 turning insert is a universal grade formulated for cast‑iron machining, offering a balance of wear resistance and edge stability tailored to that material class. How is holder compatibility determined for this insert? Compatibility depends on matching the insert’s form, relief angle, tolerance class, fastening method, size and thickness to the intended external holder or boring bar; ISO CNMA geometry simplifies this matching process. Can the insert be used without a chipbreaker? Yes — the insert is supplied without a chipbreaker; this allows selection of a chip control solution appropriate to the workpiece, machine rigidity and cutting parameters for optimal chip formation. What benefits does the CVD coating deliver? The CVD coating on the T5115 grade improves abrasion resistance and helps maintain a sharp cutting edge under varying cast‑iron conditions, supporting longer tool life and consistent component quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMA 120404 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO‑standard rhombic geometry, a CVD‑coated carbide grade (T5125) and a compact 0.4 mm corner to secure reliable performance when turning cast iron under interrupted conditions; order the insert directly via Metav Werkzeuge or ask our consultants if needed. CNMA 120404 T5125 CNMA120404 — Tungaloy turning insert, CVD‑coated carbide The CNMA120404 T5125 is a rhombic ISO turning insert for external and internal turning, designed for cast iron applications and intermittent cutting situations. CVD-coated carbide grade T5125 Optimised for cast iron and interrupted cuts Rhombic ISO CNMA120404, 80° cutting geometry 0.4 mm corner radius with cylindrical hole Maximised edge life through a tougher coating and substrate The combination of a CVD‑coated layer and a wear‑resistant carbide substrate provides a durable cutting edge that copes with fluctuating forces in interrupted machining. The tougher grade T5125 is formulated to maintain edge integrity when cutting cast iron under unstable conditions, which translates into fewer unplanned indexings and clearer process windows. For shops seeking predictable tool life, this cutting grade reduces risk of premature flank failure while keeping cutting performance consistent. Secure mounting and universal ISO fit for straightforward tool management The rhombic ISO CNMA120404 form and the presence of a cylindrical hole ensure stable clamping and repeatable positioning in compatible tool holders. The 80° cutting geometry supports standard external and internal turning set ups without bespoke fixtures, simplifying tool inventory and holder selection. Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness, so the standardised geometry aids rapid replacement and consistent seating during tool changes. Geometry tailored for interrupted cuts without a chipbreaker With a 0.4 mm corner radius and no chipbreaker, the insert is intended for operations where robust edge strength and uncomplicated chip flow are priorities. The lack of an integrated chipbreaker is compensated by the T5125 grade’s resilience, making this insert suitable for short, interrupted engagements and less rigid workholding. For turning tasks where chip formation is managed by process parameters or external chip control, the simple top geometry helps avoid fragile cutting edges. Practical advantages for workshop productivity and application flexibility As an indexable insert in the ISO turning family, the component supports quick replacement, straightforward stock management and predictable machining outcomes. The 4.76 mm plate thickness and standardised dimensions are easy to plan into tool setups, while the material pairing emphasises productivity when machining cast iron in less stable conditions. For manufacturers seeking a balance between durability and operational simplicity, this insert delivers a focused solution without complex auxiliary requirements. Contact Metav Werkzeuge for tailored application advice and to request the Tungaloy CNMA120404 T5125 insert; technical queries and orders can be sent to info@metav-werkzeuge.com or discussed by phone at +49 2822 7131930 Technical data Article number: 6850125 Manufacturer SKU: TUN6850125 Label / Name: CNMA120404 T5125 Tungaloy turning insert Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 80° Hole: with cylindrical hole Features and applications Coating: CVD Grade: T5125 Substrate: carbide Shape: rhombic Chipbreaker: none Typical application: external and internal turning Suited materials: cast iron (interrupted cuts) Series: ISO turning inserts FAQ What materials is this insert suitable for? The CNMA120404 T5125 insert is formulated for cast iron work, especially where interrupted cuts or less stable conditions occur. Does the insert include a chipbreaker? No, the insert is supplied without a chipbreaker; its T5125 grade and geometry are intended to provide edge robustness for interrupted operations. Which holders are compatible with this ISO insert? Compatibility requires matching the rhombic form, relief angle, tolerance class, clamping method, size and thickness; use holders specified for ISO CNMA120404 inserts. How does the 0.4 mm corner radius affect performance? A 0.4 mm radius increases edge strength and reduces susceptibility to chipping during interrupted engagements while offering a balance between edge robustness and surface finish. Can this insert be used for both external and internal turning? Yes, the rhombic ISO form and 80° cutting geometry make it suitable for both external and internal turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120404 TH10 Wendeplatten - Tungaloy
Combining the low cutting forces of the TH10 uncoated carbide grade with a precise 0.4 mm corner radius and an 80° rhombic geometry yields stable, clean finishes for non‑ferrous turning operations; order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge team for application advice. CNMA 120404 TH10 — Indexable turning insert, rhombic 80°, 0.4 mm radius — Tungaloy CNMA 120404 TH10 is an ISO‑designation indexable insert for general turning; suitable for external and internal turning where low cutting forces and fine surface quality are required. CNMA 120404 TH10 ISO rhombic 80° geometry Uncoated carbide for low cutting forces 0.4 mm corner radius for fine finishing Cylindrical hole; compatible with ISO holders Improve throughput with low cutting forces and consistent surface finish The combination of the TH10 uncoated carbide grade and a 0.4 mm corner radius reduces cutting forces and helps achieve consistent surface quality in finishing passes. The rhombic 80° plate form provides a neutral lead that is versatile for a range of turning tasks, allowing a single insert geometry to cover external and internal operations. In practice, the uncoated cutting edge lowers friction compared with coated alternatives in non‑ferrous materials, which contributes to reduced heat generation and extended tool life under appropriate cutting conditions. Optimised for non‑ferrous materials and precise finishing This indexable insert is designed primarily for machining non‑ferrous materials and situations where a sharp, uncoated edge supports low feed forces and clean chips. The absence of a chipbreaker means chip formation is governed by cutting parameters and material choice; this offers better surface integrity when a controlled, continuous chip is desirable. The cylindrical hole ensures secure clamping in standard clamping systems and supports repeatable seating, which is essential for maintaining dimensional accuracy during batch production. ISO compatibility and practical system integration for reliable production The ISO designation and standard geometry simplify selection of compatible holders and clamping sets, while the plate thickness of 4.76 mm and 12 mm inscribed circle match common ISO toolholders. Using the correct underlay, clamp set and replacement screws completes the system: ISO conformity reduces downtime by enabling swift insert changes and predictable performance. The robust indexable format supports economical operations by permitting multiple indexed edges; for complex jobs, Metav Werkzeuge can advise on holder matching and cutting data to suit machine rigidity and workpiece material. For machining tasks that prioritise low cutting forces and fine surface finishes, select the Tungaloy CNMA 120404 TH10 insert via Metav Werkzeuge or contact Metav Werkzeuge at info@metav-werkzeuge.com / +49 2822 7131930 for tailored selection support and cutting data. Technical data Article number: 6801914 Manufacturer SKU: TUN6801914 Merchant SKU: 6801914-Tungaloy Model series: ISO indexable turning inserts Application: turning ISO designation: CNMA120404 Grade: TH10 Facts Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 12 mm Lead/approach angle: 80° Relief (clearance) angle: 0° Hole: with cylindrical hole Special features Uncoated carbide grade TH10 No chipbreaker (finished‑cut applications) Rhombic plate form compatible with ISO holders Secure clamping via cylindrical hole Designed for non‑ferrous materials and low cutting forces FAQ Which materials are best machined with this insert? The CNMA 120404 TH10 insert and its TH10 uncoated carbide are optimised for non‑ferrous materials and finishing applications where low cutting forces and clean surfaces are required. Is this insert compatible with standard ISO turning holders? Yes. The ISO designation CNMA120404 and the rhombic 80° plate form ensure compatibility with standard ISO holders when the holder supports the specified size, thickness and clearance angle. Why is there no chipbreaker on this grade? The absence of a chipbreaker on this design favours finishing operations and applications where produced chips are managed by cutting conditions or downstream chip control; the TH10 edge promotes low friction and cleaner cuts. Can the insert be used for internal turning? Yes. The 80° rhombic geometry and 0.4 mm corner radius make the insert suitable for both external and internal turning tasks, provided the holder and setup accommodate the insert dimensions. What clamping and system components are required for safe use? Use a matching ISO external holder or boring bar, correct underlay and clamping set, plus replacement screws as needed to ensure stable seating and repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120408 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of durable carbide grade FX105 and ISO CNMA120408 geometry for stable cutting performance and predictable tool life; ideal for productive turning operations. Order the CNMA120408 FX105 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMA 120408 FX105 Tungaloy indexable turning insert — 80° rhombic, with cylindrical hole CNMA120408 FX105 is a rhombic, ISO-compliant indexable insert designed for ISO-standard turning applications and robust edge stability ISO-standard rhombic geometry 80° Carbide grade FX105 for long life 0.8 mm corner radius for robust cutting With cylindrical hole for secure clamping Productivity through consistent edge life and wear resistance The CNMA120408 FX105 insert pairs a purpose-engineered geometry with a wear-resistant carbide grade FX105, delivering predictable tool life under typical turning conditions. The 80° geometry provides a balanced cutting edge that supports both external and internal turning while reducing deflection in light to medium-duty cuts. As a result, production cycles become more reliable and downtime for insert changes is reduced, contributing directly to throughput and process efficiency. Fast, repeatable clamping for workshop efficiency Designed to the ISO specification, the rhombic indexable insert ensures compatibility with standard holders when matching form, clearance angle and tolerance class. The rhombic shape, cylindrical hole and a plate thickness of 4.76 mm allow firm seating and repeatable positioning, which lowers setup time and maintains cutting geometry between indexings. Clear dimensional conformity means replacement is straightforward and repeatable, supporting lean changeovers on the shop floor. Application scope and practical machining advice The insert, made from cemented carbide and supplied without a chipbreaker, is intended for general turning; select a chipbreaker and grade appropriate to the workpiece material and cutting strategy. The corner radius 0.8 mm offers a compromise between edge strength and surface finish, suitable for medium finishing and light roughing. For materials and parameters beyond standard turning tasks, consult the technical team to match insert geometry and clamping to the machining stability required. For reliable, productive turning with Tungaloy carbide technology, contact Metav Werkzeuge for ordering and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6822098 Manufacturer SKU: TUN6822098 SKU: 6822098-Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: CNMA120408 FX105 Tungaloy insert Facts Size: 12 mm Plate thickness: 4.76 mm Angle: 80° Corner radius: 0.8 mm Clearance angle: 0° Special features Rhombic plate form Cylindrical hole (with hole) Carbide grade FX105 No chipbreaker Intended application: turning ISO designation: CNMA120408 Material: cemented carbide FAQ Which holders are compatible with this CNMA120408 insert? Compatibility is determined by the holder form, clearance angle, tolerance class, fastening type, size and thickness; the CNMA120408 FX105 fits ISO-standard holders designed for CNMA inserts. Is the insert coated or uncoated? The CNMA120408 FX105 is supplied as a cemented carbide insert in the FX105 grade; coating details are not specified for this item and should be confirmed if coating is required. What cutting tasks suit a 0.8 mm corner radius? A 0.8 mm corner radius offers increased edge strength for light roughing and medium finishing, balancing durability and surface quality in typical turning operations. Can this insert be used for internal turning? Yes, the rhombic geometry and ISO conformity make the insert suitable for both external and internal turning when paired with an appropriate holder and machining strategy. Why is there no chipbreaker on this insert? This variant is offered without a chipbreaker to allow selection of the optimal chip control geometry for the specific workpiece material and process; choose a matching chipbreaker or insert variant as required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120408 FX105 Wendeplatten - Tungaloy
Take advantage of a compact solution that combines ISO‑standard compatibility, robust carbide construction and a balanced FX105 grade for reliable edge life and process stability; order the CNMA120408 FX105 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMA120408 FX105 Turning Insert – Tungaloy (ISO rhombic 80°; with cylindrical hole) CNMA120408 FX105 is an ISO‑standard indexable insert designed for general turning applications, offering a blend of wear resistance and edge stability for productive machining. ISO‑standard rhombic insert, 80° geometry FX105 carbide grade for mixed wear and toughness Cylindrical hole for secure clamping Corner radius 0.8 mm for finish and strength Predictable ISO‑compatible geometry for stable turning The ISO‑standard rhombic form with an 80° geometry ensures compatibility with a wide range of external and internal turning holders. The indexable design supports quick corner changes and predictable seating; compatibility with a given holder is determined by form, clearance, tolerance class, fastening method, nominal size and 4.76 mm thickness. This layout reduces machine downtime by simplifying insert replacement and helps maintain consistent part geometry across production runs. Balanced FX105 grade and carbide body for durable cutting The Tungaloy FX105 grade fuses wear resistance with toughness to extend tool life under mixed cutting conditions. Manufactured in carbide, the insert maintains cutting‑edge stability during interrupted cuts and medium‑to‑high material removal rates. Because the insert is supplied without a chipbreaker, process planners can choose appropriate cutting data and holder geometries to manage chip flow; the absence of an integrally formed chipbreaker can be an advantage when custom chip control is achieved at the toolholder level or when machining longer, continuous chips is acceptable. Secure clamping and machining benefits for finishing and roughing A cylindrical hole and matching clamping hardware offer reliable seat and repeatability when combined with a suitable clamping set and underlay. The corner radius 0.8 mm supports improved surface finish and reduces stress concentration at the cutting edge, while the 0° clearance geometry is part of the ISO configuration that influences cutter engagement and tool presentation. The insert’s 12 mm nominal size and 4.76 mm thickness provide mechanical stability for a range of turning tasks; selecting the correct holder and machining parameters yields both consistent finishes and economical tool consumption. For machining tasks that demand reliable edge stability and predictable insert changes, contact Metav Werkzeuge to request Tungaloy CNMA120408 FX105 inserts and specialist application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801915 Manufacturer item number: 6801915 Manufacturer SKU: TUN6801915 SKU: 6801915-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMA120408 FX105 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Thickness: 4.76 mm Nominal size: 12 mm Geometry angle: 80° Clearance (frewinkel): 0° Special features Material: carbide Grade: FX105 (Tungaloy) Plate form: rhombic, 80° Hole style: cylindrical hole Chipbreaker: none (without chipbreaker) Intended application: turning (external and internal) ISO‑standardised insert; holder compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What turning tasks is this insert best suited for? The CNMA120408 FX105 insert is intended for general external and internal turning where a balance of wear resistance and edge stability is required; it performs well in medium cutting conditions when combined with an appropriate holder. What does the FX105 grade mean for cutting performance? FX105 is a Tungaloy carbide grade developed to provide a compromise between wear resistance and toughness, giving consistent edge life in mixed material and interrupted cutting scenarios. Is there a chipbreaker on this insert? No; the item is supplied without a chipbreaker, so chip control is achieved via holder geometry, cutting parameters or separate chip‑control solutions rather than an integrated breaker. How is the insert secured in the toolholder? Retention is by a central cylindrical hole using a suitable clamping set and underlay; correct mating between insert and holder (form, size, thickness and tolerance) ensures repeatable seating. Can this insert be used for finishing operations? Yes; the 0.8 mm corner radius supports enhanced surface finish and edge strength, making the insert suitable for light finishing cuts when set up with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120408 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of precision finish, ISO compatibility and stable cermet performance for consistent turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMA 120408 NS520 Tungaloy turning insert (ISO) — finishing to light machining A CNMA120408 NS520 indexable insert for ISO‑standard turning, engineered for finishing and light cuts where surface quality and dimensional control are priorities. ISO‑standard rhombic CNMA geometry Coated cermet grade NS520 0.8 mm corner radius for fine finish With cylindrical hole; 4.76 mm thickness High‑quality surface finish and predictable wear The cermet-based NS520 grade is designed specifically for finishing to light machining of steel, delivering a stable wear pattern and consistent dimensional results. A 0.8 mm corner radius reduces edge chipping while enabling a fine surface texture, which lowers downstream rework. The combination of a hard cutting surface and a robust substrate ensures predictable flank wear, so process windows remain narrow and repeatable during batch production. Secure clamping and ISO compatibility for dependable setups The insert follows ISO specifications for form, tolerances and fixing, which simplifies toolholder selection and reduces setup time. Its rhombic 80° geometry and the provision of a cylindrical hole enable positive mechanical location and secure clamping in compatible holders. The plate thickness of 4.76 mm and the 12 mm size contribute to stable mounting and heat dissipation, supporting steady cutting conditions and reducing the chance of vibration‑related imperfections. Efficient machining strategy and system integration As part of a standard turning system — indexable insert, suitable external holder or boring bar, support pad and clamping set — this grade supports economical finishing operations with low tendency to build edge debris. The insert is available as cermet or coated cermet, offering a balance between wear resistance and surface quality. With no chipbreaker fitted, the geometry favours continuous, uniform chip flow in light cuts; selecting the appropriate holder and machining parameters will extend service life and maintain component tolerances. Contact Metav Werkzeuge for tailored application advice and to order the CNMA120408 NS520 insert directly from stock Technical Data Article number: 6801916 Manufacturer SKU: TUN6801916 SKU: 6801916-Tungaloy Model series: ISO turning inserts Manufacturer: Tungaloy Facts Shape: rhombic 80° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 12 mm Relief angle: 0° With cylindrical hole Materials & Features Grade: NS520 Cutting material: cermet / coated cermet Substrate: carbide Application: turning (finishing to light) Chipbreaker: none Compatibility: ISO holders; depends on form, clearance, tolerance class, fixing, size and thickness FAQ What applications is this insert best suited for? The CNMA120408 NS520 insert is intended for finishing and light turning of steel where surface finish and dimensional consistency are required. What does the NS520 grade offer compared with conventional grades? NS520 is a cermet grade developed for superior surface finish and even wear behaviour, making it suitable for finishing passes and parts requiring tight tolerances. How does the rhombic 80° form affect cutting performance? The rhombic 80° geometry offers versatile approach angles for external and internal turning, balancing edge strength with access to tight profiles. Is a chipbreaker included and what does that mean for chip control? This insert is supplied without a chipbreaker; that favours continuous chip formation and a smoother surface in finishing operations but requires appropriate parameters and coolant strategy. Which toolholders are compatible with this insert? Compatibility follows ISO standards; holders must match the insert form, relief angle, tolerance class, fixing method, size and thickness for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120408 T505 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide T505 grade, an 80° CNMA form and a 0.8 mm corner radius for efficient, reliable cast-iron turning; order the CNMA 120408 T505 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMA 120408 T505 turning insert (ISO) – Tungaloy A CNMA 120408 T505 indexable insert designed for economical external and internal turning, optimised for cast-iron applications. CVD-coated carbide grade T505 ISO CNMA 120408, 80° rhombic form 0.8 mm corner radius for precision Suitable for cast-iron turning applications Economical, repeatable cutting performance for cast iron The CVD-coated carbide grade T505 delivers a balance of wear resistance and economy for machining cast iron. The coating reduces adhesion and flank wear, enabling longer tool life and consistent dimensional results under stable machining conditions. Where interrupted cuts or varying stability occur, tool selection should match the setup rigidity and desired cutting speed to maintain productivity and surface quality. The insert form supports predictable chip flow and helps reduce rework in serial production. ISO compatibility and secure mounting for industrial workflows Designed to the ISO CNMA standard, the insert’s rhombic geometry and 80° wedge angle facilitate both external and internal turning operations with robust engagement. Compatibility with holders is determined by form, clearance angle (0°), tolerance class, fastening method, size and thickness (4.76 mm). The insert features a cylindrical hole for positive clamping and positioning in a suitable seat. These standardized dimensions simplify tool changeovers and inventory management across production lines. Durable design that reduces downtime and maintains surface quality With a 0.8 mm corner radius and a coated carbide substrate, the insert offers a compromise between strength and finish capability, enabling higher metal removal rates without sacrificing edge integrity. The absence of an integrated chipbreaker calls for process-aware parameter selection, but in return the indexable insert provides predictable behaviour and stable wear progression. For many machining cells, this results in fewer interventions, extended tool cycles and a steadier surface finish on workpieces. Contact Metav Werkzeuge for specification support or to order Tungaloy CNMA 120408 T505 inserts; technical advice and procurement assistance are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6793661 Manufacturer SKU: TUN6793661 SKU: 6793661-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: CNMA120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Wedge angle: 80° Clearance angle: 0° Special features Material: carbide Coating/grade: T505 (CVD-coated) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: none Typical application: turning (external and internal) Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited to machine? The CNMA 120408 T505 insert is designed primarily for machining cast iron; the T505 coating and carbide substrate provide good wear resistance and stable chip formation on ductile and grey cast irons. Can this insert be used in both external and internal turning? Yes. The ISO CNMA geometry and 80° angle make the insert suitable for both external and internal turning operations when paired with a correctly matched holder. How is the insert fixed to the holder? The insert has a cylindrical hole for positive clamping; compatibility requires matching form, clearance angle, tolerance class, fastening method, size and thickness with the chosen holder. Is a chipbreaker integrated in this grade? No, this insert is supplied without a chipbreaker; machining parameters should be adapted to the stability of the setup and the workpiece to ensure effective chip control. Which identifier should be used when ordering spare inserts? Use the article number 6793661 or the manufacturer SKU TUN6793661 when ordering the Tungaloy CNMA 120408 T505 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 120408 T5105 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T5105 and ISO compatibility for dependable high-speed machining of cast iron; the rhombic CNMA120408 geometry with a 0.8 mm corner radius provides consistent edge life and surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for selection advice. CNMA 120408 T5105 — Indexable turning insert for turning by Tungaloy CNMA120408 T5105 is an ISO‑standard rhombic indexable insert designed for turning operations, optimised for high‑speed machining of cast iron under stable cutting conditions CVD-coated carbide grade T5105 ISO CNMA120408 rhombic geometry Suitable for high-speed cast iron turning Cylindrical hole for secure clamping Consistent performance with a wear‑resistant grade The insert is manufactured from carbide and finished with a CVD coating to provide enhanced wear resistance during elevated cutting speeds. The T5105 grade is formulated for stable cutting of cast iron, enabling longer tool life and fewer insert changes, which improves uptime in batch production. In practical terms, the coating reduces flank wear and edge breakdown, while the substrate maintains toughness—this balance supports higher metal removal rates without sacrificing surface quality. Geometry and mounting that stabilise the process The rhombic shape (ISO CNMA120408) with an 80° included angle and a 0.8 mm corner radius gives a robust cutting edge suited to external and internal turning tasks. The insert is supplied with a cylindrical hole, ensuring secure clamping in standard ISO holders; compatibility is defined by form, relief angle, tolerance class, clamp style, size and thickness. The 4.76 mm plate thickness contributes to vibration dampening in less rigid set‑ups, helping to preserve dimensional accuracy and reduce tool chatter during continuous cuts. Practical benefits for workshop productivity Choosing this indexable plate reduces downtime through predictable wear behaviour and simplified inventory: one ISO CNMA120408 variant covers a range of cast iron turning jobs when used with the appropriate holder and cutting parameters. The absence of a dedicated chipbreaker on this grade means chip control must be matched to the machining conditions and coolant strategy, but the insert’s edge geometry favours stable, repeatable cuts that lower scrap rates and post‑process finishing. Selection guidance and application notes For best results in high‑speed cast iron machining, pair the insert with rigid tooling and moderate depths of cut; the 0° relief angle and rhombic profile favour finishing and medium‑cut conditions. When adapting to different cast iron types or interrupted cuts, consider tooling stability and feed adjustments rather than changing insert geometry. The ISO standard designation simplifies holder selection and replacement logistics across production lines. For process optimisation and a tailored recommendation for the Tungaloy CNMA120408 T5105 indexable insert, contact Metav Werkzeuge for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850134 SKU: 6850134-Tungaloy Manufacturer SKU: TUN6850134 Model series: ISO turning indexable inserts Core dimensions Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Insert angle: 80° Relief angle: 0° Features & materials Material: carbide Coating: CVD Grade: T5105 Shape: rhombic Hole style: cylindrical hole Chipbreaker: none Application: turning; suited for cast iron FAQ What materials is this insert suitable for? The CNMA120408 T5105 insert is designed primarily for high‑speed machining of cast iron; its CVD‑coated carbide composition delivers wear resistance appropriate for such materials. Does this insert fit ISO holders? Yes. The insert follows the ISO CNMA120408 designation, so compatibility with ISO turning holders is determined by form, relief angle, tolerance class, clamping style, size and thickness. What does the 0.8 mm corner radius affect? A 0.8 mm corner radius balances edge strength and surface finish: it increases edge robustness for repeated cuts while maintaining a fine finish for many turning applications. Is there a chipbreaker on the insert? This grade is supplied without a chipbreaker, meaning chip control should be managed through cutting parameters, toolholder selection and coolant application for the best results with cast iron. How should the insert be clamped? The insert features a cylindrical hole for positive clamping in compatible ISO holders; ensure the holder matches the insert’s geometry and thickness for stable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com