CNMG 090308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that combines toughness and wear resistance with an ISO-standard rhombic form and a practical 0.8 mm corner radius for dependable medium-to-heavy steel turning; Order the CNMG090308 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090308 T9225 Turning insert by Tungaloy — CVD-coated carbide, ISO rhombic form A CNMG090308 T9225 ISO-standard rhombic turning insert designed for medium to heavy steel machining and intermittent cuts, providing a balance of toughness and edge stability for demanding turning operations. CVD-coated carbide grade T9225 for steel machining Rhombic CNMG 09 form with 80° cutting angle 0° relief angle and 0.8 mm corner radius Double-sided chipbreaker, with cylindrical hole High-performance grade for stable, productive steel turning The insert is manufactured in a CVD-coated carbide grade engineered for a wide range of steel applications, offering increased resistance to abrasive wear while retaining the toughness required for interrupted or variable engagement. The combination of the T9225 grade and the rhombic geometry ensures a reliable cutting edge under fluctuating cutting forces, which translates into fewer unexpected tool changes and steadier cycle times. As the insert is intended for turning, the geometry supports consistent chip formation and reduces the likelihood of workpiece damage in medium-to-heavy machining operations. ISO compatibility and system integration for straightforward tool planning Produced to ISO specifications, the rhombic CNMG form integrates into standard toolholder systems when matched for form, relief angle, tolerance class, fastening and thickness. The insert’s 0° relief angle, 80° cutting angle and the presence of a cylindrical locating hole mean that selection of a compatible outside holder, backing pad and clamping hardware is crucial for repeatable mounting and cutting performance. Compatibility is defined by physical dimensions and tolerances rather than brand alone, allowing planners to use existing holders where dimensions and clamping method match the insert parameters. Practical advantages that reduce downtime and increase output Thanks to the universal performance profile of the grade and the double-sided chipbreaker, the insert supports extended cutting intervals and stable surface finish in steel turning tasks, which helps lower overall tooling costs through better edge life and less frequent indexing. The rhombic CNMG form with a 0.8 mm corner radius offers a pragmatic compromise between strength and finish capability, enabling productive roughing and reliable semi-finishing without excessive tool inventory. The CVD coating contributes to thermal and adhesive wear control, supporting consistent results across batch and single-part production. Selection advice and safe handling for workshop use When choosing this insert for machining operations, attention should be paid to holder rigidity, clamping torque and suitable cutting data for the material in question; the insert performs best when mounted in holders that match the CNMG form and thickness specification. Inserts should be stored in protective pockets to avoid edge contact and should be inspected for edge damage before setting cutting parameters. For detailed matching of holder geometry or to confirm suitability for specific steels and cut conditions, technical consultation is recommended to ensure optimal process security and productivity. For fast supply and application advice on the Tungaloy CNMG 090308 T9225 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for immediate support and availability Technical data Article number: 6780752 Manufacturer SKU: TUN6780752 SKU: 6780752-Tungaloy Material: carbide Grade: T9225 Designation: CNMG090308 Model series: ISO turning inserts Application: Turning Facts Corner radius: 0.8 mm Cutting angle: 80° Relief angle: 0° Plate thickness: 3.18 mm Plate size: 09 Special features CVD-coated carbide grade for wear resistance Rhombic CNMG form with cylindrical hole Double-sided chipbreaker Suited to medium-to-heavy steel machining Designed for intermittent and variable cuts FAQ What materials is this insert suitable for? The CNMG090308 T9225 insert is formulated for medium-to-heavy steel machining; the T9225 grade provides toughness for interrupted cuts and good wear resistance during continuous turning. How does the 0° relief angle affect cutting performance? A 0° relief angle improves edge strength and support in this rhombic configuration, which helps maintain stability under heavy or variable engagement typical in turning operations with the CNMG form. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO geometry for the CNMG form; compatibility requires matching the holder by form, tolerance, thickness and fastening method to ensure secure mounting and repeatable performance. What benefit does the double-sided chipbreaker provide? The double-sided chipbreaker enables effective chip control on both indexable sides, supporting reliable chip formation and easing the transition between edges when the insert is indexed. What does the designation CNMG090308 indicate? The ISO designation describes the rhombic CNMG form, plate size 09, and the corner radius 0.8 mm; the full label CNMG090308 T9225 identifies the geometry together with the T9225 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide substrate and the T9225 universal grade delivers robust performance for medium to heavy steel turning, while ISO standardisation ensures straightforward replacement and interoperability. Order genuine inserts via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNMG090308 T9225 indexable insert for turning — Tungaloy The CNMG090308 T9225 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering high toughness for variable engagement conditions. CVD-coated carbide for high wear resistance Robust T9225 grade for medium–heavy steel Rhombic CNMG format, 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole High toughness and consistent cutting performance The insert combines a CVD-coated carbide substrate with the T9225 grade to provide a balance of hardness and toughness suited to medium to heavy steel machining. The coating improves wear resistance and reduces crater wear, which extends edge life under varying engagement conditions. Thanks to the universal nature of the grade, performance remains stable when occasional interruptions or changing cut parameters occur, reducing unplanned stoppages and contributing to predictable production runs. Better chip control and surface quality for productive turning Equipped with a double-sided chipbreaker, this indexable insert promotes controlled chip formation and evacuation during both external and internal turning. Improved chip control lowers the risk of recutting, protects the toolholder, and supports improved surface finish on finished components. For production environments where consistent part quality and reduced post-process work are priorities, the chipformer design contributes directly to productivity and reduces the need for secondary finishing operations. Compatibility and practical mounting guidance Compatibility with toolholders depends on matching insert geometry: form, relief angle, tolerance class, fastening method, size and thickness. The rhombic shape and 0° relief angle deliver a strong cutting edge, while the 0.8 mm corner radius balances edge strength and surface integrity. The insert’s 3.18 mm thickness and CNMG size ensure interchangeability within ISO systems when the holder accepts CNMG090308 geometry. Use a suitable clamp, shim and replacement screws to secure the insert and maintain repeatable positioning. Shop-floor benefits and selection advice For many turning tasks the combination of grade and chipbreaker yields lower tool consumption and higher process stability, translating into a favourable cost-in-use. The universal characteristics of this insert help to simplify tooling inventories while still handling demanding steel turning. When machining unfamiliar alloys or when stability is limited, select the chipbreaker and cutting parameters to prioritise toughness. Metav Werkzeuge’s specialists can advise on optimal holder combinations and feeding strategies to match machining stability and part tolerance requirements. For application advice or to source genuine Tungaloy CNMG090308 T9225 indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780823 Manufacturer article number: 6780823 Manufacturer SKU: TUN6780823 SKU: 6780823-Tungaloy Name: CNMG090308 T9225 Tungaloy indexable insert Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: T9225, CVD-coated Application: Turning Facts ISO designation: 090308 Insert size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° With hole: yes (cylindrical) Chipbreaker: double-sided Special features Rhombic insert form (CNMG) Double-sided chipbreaker for chip control Cylindrical hole for screw clamping CVD-coated cemented carbide substrate Universal grade for medium to heavy steel machining ISO-standard format for interchangeability Compatibility requires matching holder form, relief angle, tolerance class, fastening, size and thickness FAQ What applications is this insert suitable for? The CNMG090308 T9225 insert is intended for external and internal turning operations, particularly where medium to heavy steel machining requires a robust, tough cutting edge. Which materials can be machined with this grade? The T9225 grade and CVD-coated carbide substrate are optimised for a broad range of steel applications, especially medium to heavy turning; selection of chipbreaker and parameters should match the specific alloy and stability. What does the T9225 designation indicate? T9225 denotes a universal, CVD-coated carbide grade engineered for toughness under interrupted cuts and varying engagement conditions, offering reliable edge life in demanding turning tasks. How is the insert secured in the toolholder? This insert features a cylindrical hole for screw clamping; it is double-sided and indexed, so the clamp, shim and replacement screws used in the ISO holder must match the insert’s form, size and thickness for secure, repeatable mounting. How does the corner radius affect performance? The 0.8 mm corner radius increases edge strength and is a compromise between toughness and surface finish, providing improved resistance to chipping during deeper cuts while still supporting good finished surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a tough CVD-coated carbide T9235 grade and the proven CNMG geometry for reliable performance in unstable turning conditions; increased tool life and consistent chip control support efficient production. Order the CNMG090308 T9235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090308 T9235 ISO turning insert – Tungaloy A CNMG090308 T9235 indexable turning insert engineered for external and internal turning, optimised for steel applications under interrupted or unstable cutting conditions. CVD-coated carbide grade T9235 Designed for unstable cutting conditions Double-sided chipbreaker for reliable chips Rhombic CNMG shape with 0.8 mm corner radius Robust grade for demanding steel turning The use of a CVD-coated carbide in grade T9235 provides a measured balance between toughness and wear resistance, making the insert particularly suitable for turning steel at lower cutting speeds and in operations with interrupted cuts. This composition reduces the risk of chipping at the cutting edge and prolongs effective tool life, which translates into fewer indexings and lower tool cost per component. The material choice is a rational, productivity-driven decision: stable chip formation and predictable flank wear result in consistent cycle times and fewer process interruptions. Geometry and chip control that stabilise the cut The rhombic CNMG form with an 80° included angle and 0.8 mm corner radius gives mechanical rigidity and a defined contact area that helps to damp vibrations in unstable setups. A double-sided chipbreaker supports reliable chip control on both faces, while the 0° clearance angle and 3.18 mm plate thickness maintain secure clamping and a stable cutting edge. The insert’s cylindrical hole facilitates secure fastening in compatible holders and simplifies re-indexing. These geometric choices are designed to convert tool features into measurable benefits: improved surface finish consistency and reduced risk of sudden edge failure under interrupted cutting. System compatibility and practical considerations Produced as part of an ISO-compliant indexable insert series, compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s designation and dimensions (size 09, thickness 3.18 mm) must match the holder’s specifications for safe, repeatable clamping. The CNMG geometry is widely supported by standard external and boring tool systems; selecting the correct holder and clamping set ensures the insert’s advantages—tough CVD coating and chip control—are delivered on the workpiece. For tailored advice on holder selection or process parameters, technical consultation is available to match cutting data to workpiece material and machine conditions. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 For process reliability with Tungaloy’s T9235 grade, contact Metav Werkzeuge for a recommended holder and cutting-parameter package tailored to the application Technical data Article number: 6785974-Tungaloy Manufacturer article number: 6785974 Manufacturer SKU: TUN6785974 Material: Carbide Grade/coating: CVD-coated, T9235 Shape: Rhombic (CNMG) Size designation: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 0° Hole: with hole, cylindrical Chipbreaker: Double-sided Application: Turning (external and internal) Facts Included angle: 80° Corner radius: 0.8 mm Thickness: 3.18 mm Size: 09 SKU: 6785974-Tungaloy Manufacturer article number: 6785974 Special features CVD-coated carbide for toughness and wear resistance Grade T9235 optimised for steel at lower cutting speeds ISO-standardised indexable insert format Compatibility determined by holder form, clearance, tolerance, fastening, size and thickness FAQ Which materials are best suited for this insert? The CNMG090308 T9235 is a CVD-coated carbide insert optimised chiefly for steel machining and performs well in interrupted cuts and less-stable setups. How does the T9235 grade influence tool life and performance? Grade T9235 offers enhanced toughness with a CVD coating for improved edge stability; the combination reduces edge chipping and supports longer service life under interrupted or unstable cutting compared with harder, more brittle grades. What should be checked for holder compatibility? Compatibility requires verification of holder form, clearance angle, tolerance class, fastening method, and the insert’s size and thickness; correct pairing ensures secure clamping and repeatable performance with the CNMG geometry. How many usable cutting faces does the insert provide? The double-sided chipbreaker design supplies usable cutting faces on both sides of the plate, enabling indexable reuse and economical edge rotation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 T9235 Wendeplatten - Tungaloy
Take advantage of a combination of stable chip control, robust CVD-coated carbide and ISO compatibility to maintain steady production under interrupted cutting conditions; the reliable performance and double-sided design also help to reduce tooling costs and machine downtime. Order the insert directly via Metav Werkzeuge or consult the specialist team for application advice. CNMG 090308 T9235 ISO turning insert for external and internal turning — Tungaloy The CNMG090308 T9235 is an ISO-form turning insert designed for general turning where interrupted cuts and variable stability demand a tough, CVD-coated carbide grade. CVD-coated carbide for stable cutting Designed for steel and interrupted cuts Rhombic shape with 80° lead angle Double-sided insert with cylindrical hole Increased process stability for interrupted turning The CVD-coated carbide grade T9235 is formulated for stable chip formation in lower-speed operations and under unstable cutting conditions. The coating provides thermal and abrasive resistance, which helps to deliver longer tool life when machining steel. As a result, cycle times remain predictable and service intervals are extended, supporting higher overall equipment effectiveness. The double-sided geometry and the double-sided chipbreaker design reduce tooling costs by offering two usable cutting edges per index; this translates into fewer tool changes and less production stoppage. Secure mounting and ISO-compliant compatibility Built to ISO standards, the insert’s compatibility with toolholders depends on form, 0° clearance, tolerance class, fastening method, size and thickness. The rhombic plate form and 80° lead angle provide a stable contact surface and favourable cutting direction for many external and internal turning tasks. The insert features a cylindrical hole for positive clamping and a plate thickness of 3.18 mm, which together ensure reliable seating and repeatable positioning. Explaining briefly: a 0° clearance angle means a neutral flank geometry that supports robust contact and is beneficial when facing variable setups or interrupted cuts. Practical advantages in everyday turning operations For workshops machining steel with intermittent cuts, the insert offers direct, measurable benefits: consistent edge behaviour in unstable conditions and predictable wear characteristics because of the CVD-coated carbide substrate. The modest 0.8 mm corner radius balances strength and profile accuracy, enabling comfortable surface finishes without sacrificing edge robustness. Selecting the appropriate chipbreaker and grade for the material and cutting mode secures the best compromise between surface quality and productivity, while the ISO form keeps the insert compatible with a wide range of external holders and boring bars. For availability and tailored advice on the Tungaloy T9235 grade for turning applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific setups Technical data Article number: 6785973 SKU: 6785973-Tungaloy Manufacturer SKU: TUN6785973 Designation: CNMG090308 Model series: ISO turning inserts Facts Corner radius: 0.8 mm Plate thickness: 3.18 mm Lead angle: 80° Clearance angle: 0° Plate size: 09 Special features Material: carbide Coating: CVD Grade: T9235 Shape: rhombic Hole style: cylindrical hole Double-sided insert Double-sided chipbreaker Application: turning (external and internal) ISO-compliant geometry for holder compatibility FAQ What cutting tasks is this insert best suited for? The CNMG090308 T9235 insert is intended for turning operations, especially external and internal turning where interrupted cuts or variable stability occur; its CVD-coated carbide composition and chipbreaker suit steel machining. How does the T9235 grade help with interrupted cuts? Tungaloy’s T9235 grade combines a tough carbide substrate with a CVD coating to promote stable chip formation and resist edge chipping under interrupted cutting, thereby extending the usable life of the insert. Can this insert be used in any ISO holder? The insert follows ISO geometry, but compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; ensure the holder matches the CNMG090308 dimensions and clamping style. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a compromise between edge strength and surface finish, improving robustness during heavy or interrupted cuts while maintaining acceptable part accuracy and finish. Is the insert reversible and economical? Yes, the double-sided design and double-sided chipbreaker supply two usable edges per index, reducing tooling consumption and lowering per-part tooling costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH120 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade and a defined 0.2 mm corner radius ensures durable, sharp cutting edges and reliable surface finish in turning operations; order the insert via Metav Werkzeuge or consult our team for selection and clamping compatibility. CNMG 090402 AH120 – rhombic ISO turning insert for external and internal turning (PVD-coated carbide, 80°) by Tungaloy The CNMG 090402 AH120 is an ISO rhombic turning insert designed for external and internal turning, offering a wear-resistant cutting edge that balances process security and sharpness for a wide range of turning tasks. PVD-coated carbide for high wear resistance Double-sided geometry for cost-effective use 0.2 mm corner radius for precise finishes ISO rhombic 80° form with cylindrical hole Productive chip control for consistent cycle times The indexable insert delivers predictable chip formation through its double-sided chipbreaker and PVD surface treatment. The AH120 grade, a PVD-coated carbide, is engineered to combine a durable cutting edge with reduced flank wear, which helps maintain cutting parameters over longer tool life. For shops running medium to heavy cutting conditions, this means fewer insert changes and steadier cycle times. The 80° rhombic geometry provides a robust cutting edge that is well suited to turning shoulders and general external operations while still enabling internal machining when holder accessibility permits. Improved surface quality with a sharp, stable edge A small corner radius of 0.2 mm delivers improved surface finishes on turned components without sacrificing edge stability. The insert’s PVD coating enhances wear resistance and reduces built-up edge tendencies on common steels and alloyed materials, promoting repeatable part quality. Where dimensional tolerance and surface integrity are critical, the controlled edge form and consistent chip evacuation of this insert support high-quality outputs, reducing rework and inspection iterations. Clear compatibility and mounting for reliable setup The ISO designation and standard dimensions facilitate selection of a matching external holder, clamping set and replacement screws. The insert is supplied with a cylindrical hole, ensuring secure fastening in compatible clamps and backplates; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. For practical workshop planning, the 4.76 mm plate thickness and size 09 format are typical values required when matching to toolholders. This clarity shortens setup times and reduces uncertainty in tool sourcing for production cells. Contact Metav Werkzeuge for application advice, holder matching and to arrange supply of the CNMG 090402 AH120 insert; our specialists are available to advise on process parameters and clamping options Technical Data Article number: 6793697 Manufacturer SKU: TUN6793697 Stock SKU: 6793697-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide (cemented carbide) Coating: PVD (AH120) Core data ISO designation: CNMG090402 Size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Included hole: with hole (cylindrical) Geometry angle: 80° Clearance angle: 0° Special features Double-sided chipbreaker Rhombic plate form PVD-coated grade AH120 for wear and fracture resistance Suitable for external and internal turning applications Compatible with ISO-standard turning holders and clamping sets FAQ What materials is this insert suitable for? The CNMG 090402 AH120 insert, a PVD-coated carbide grade, is suitable for a broad range of turning applications; select the chipbreaker and grade AH120 for optimal performance with steels and alloyed materials according to machining stability. How does the 0.2 mm radius affect finishing? A 0.2 mm corner radius on the CNMG 090402 AH120 promotes finer surface finishes and improved dimensional control while retaining edge strength for general machining tasks. Is the insert reversible and how many cutting edges are available? The indexable CNMG090402 form is double-sided with two usable cutting edges per side, offering economical use before replacement is required. Which holder features are required for correct clamping? Secure clamping of the CNMG 090402 AH120 requires a compatible ISO rhombic holder matched for form, clearance angle, tolerance class, fastening method, size and plate thickness; the cylindrical hole ensures positive location in standard clamps. Can the AH120 grade handle interrupted cuts? The AH120 PVD-coated carbide grade is engineered for wear and fracture resistance; it is suitable for operations where a sharp cutting edge and process security are needed, including many interrupted cutting scenarios when combined with suitable cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930
CNMG 090402 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade AH6225, 80° rhombic geometry and a double-sided chipbreaker for stable, medium-duty turning of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our advisors for application guidance. CNMG 090402 AH6225 ISO turning insert for Drehen — Tungaloy The CNMG090402 AH6225 is an ISO turning insert designed for external and internal turning, offering a sharp and stable cutting edge for medium-duty machining of rostfreier Stahl. PVD-coated carbide for wear resistance 80° rhombic geometry for stable turning Double-sided chipbreaker for flexible use Cylindrical-hole design for secure clamping Consistent cutting performance and grade advantages The AH6225 grade is a PVD-coated carbide engineered as a universal solution for rostfreier Stahl, balancing a sharp cutting edge with edge stability under varying conditions. This combination supports predictable tool life and reduced interruptions in production, as the coating improves wear resistance while the substrate maintains toughness. For shops seeking reliable medium-duty performance, the insert’s geometry and grade together promote process stability and consistent surface quality without excessive tool changes. Secure fit and ISO compatibility for reliable setup As an ISO-series insert, compatibility with a toolholder depends on form, clearance angle (0° in this case), tolerance class, fastening and the plate’s size and thickness. The rhombic shape with an 80° included angle and a nominal thickness of 4.76 mm ensures a robust engagement in suitable holders. A 0.2 mm corner radius provides a compromise between edge strength and surface finish, while the cylindrical hole facilitates secure clamping and repeatable positioning in standard clamping systems. These design details reduce setup time and help maintain repeatable cutting conditions across batches. Application-focused benefits and recommended use Intended for turning operations, the insert’s double-sided chipbreaker enables economical use of both edges and provides reliable chip control for external and internal turning. In medium-duty cuts the combination of the AH6225 grade and the chipbreaker produces good surface finish and dimensional stability, especially when machining rostfreier Stahl. Where conditions vary, selecting the matching chipbreaker and feed parameters according to workpiece stability will maximise productivity and extend effective edge life, supporting efficient batch and single-part production alike. For precise medium-duty turning with the PVD-coated AH6225 grade from Tungaloy, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6946678 SKU: 6946678-Tungaloy Manufacturer SKU: TUN6946678 Brand: Tungaloy Facts ISO designation: CNMG090402 Size: 09 Plate thickness: 4.76 mm Corner radius: 0.2 mm Insert angle: 80° Clearance angle: 0° Special features Grade: AH6225 PVD-coated carbide Double-sided chipbreaker Rhombic plate form Cylindrical hole Application: Turning FAQ What materials is this insert suited for? The AH6225 grade is formulated for rostfreier Stahl; the CNMG090402 AH6225 insert from Tungaloy performs well in medium-duty machining of stainless-type steels. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the CNMG090402 designation follows ISO standards and fits holders specified for 09-sized rhombic inserts. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert improves chip control and allows use of both cutting edges, increasing cost-efficiency and maintaining consistent surface finish during turning. Can both sides of the insert be used? Yes; the double-sided geometry enables indexable use of both edges, reducing tool change frequency and supporting uninterrupted production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH6225 Wendeplatten - Tungaloy
Combining a PVD‑coated carbide grade that is optimised for rostfreier Stahl with the ISO CNMG geometry delivers consistent edge stability and versatile performance for external and internal turning. Order directly via Metav Werkzeuge or consult the team for matching holders and process settings. CNMG 090402 AH6225 ISO turning insert — PVD‑coated carbide, 80° rhombic (Tungaloy) The CNMG 090402 AH6225 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a sharp yet stable cutting edge for machining rostfreier Stahl and similar materials. PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl machining Double-sided chipbreaker for stability ISO CNMG geometry, 0.2 mm corner radius Stable edge life for consistent rostfreier Stahl turning The PVD-coated grade AH6225 is a mid‑range, carbide‑based cutting material developed for a balance of sharpness and robustness when machining rostfreier Stahl. The physical vapour deposition layer improves wear resistance and reduces built‑up edge, which in turn helps to maintain a consistent cutting edge under varying conditions. Combined with the rhombic ISO geometry and an included angle of 80°, the insert supports steady metal removal rates and predictable tool life, reducing set‑up frequency and downtime. ISO compatibility simplifies toolholder selection The ISO designation ensures straightforward interchangeability with standard CNMG toolholders. Compatibility is governed by form, tolerance class, size and thickness; the ISO series approach means holders and clamping sets that accept CNMG‑type inserts will accept this grade without special adaptation. The insert is manufactured with a cylindrical hole, aiding reliable locating and clamping in a wide range of external and internal turning fixtures and borescope holders where secure fastenings are required. Controlled chip formation and surface quality A double‑sided chipbreaker delivers consistent chip segmentation for many turning scenarios, improving chip evacuation and reducing heat buildup at the cutting zone. The small 0.2 mm corner radius is suited to finishing and semi‑finishing passes where dimensional accuracy and surface integrity are essential. The plate thickness of 4.76 mm contributes to stiffness in the cutting edge, helping to minimise vibration when performing light to medium cuts. For tougher interruptions or less rigid set‑ups, select a matching holder and adjust feed/speed to preserve the insert’s stable cutting behaviour. Contact Metav Werkzeuge for tailored advice on selecting the correct Tungaloy CNMG 090402 AH6225 insert for specific rostfreier Stahl applications and for information on compatible holders and delivery options. Technical data Article number: 6946667-Tungaloy Manufacturer item no: 6946667 Manufacturer SKU: TUN6946667 Model series: ISO-Drehwendeschneidplatten Core data Thickness: 4.76 mm Corner radius: 0.2 mm Insert size: 09 Relief angle: 0° Included angle: 80° Special features PVD-coated carbide (AH6225) Double-sided chipbreaker Rhombic plate shape (CNMG) With cylindrical hole ISO CNMG090402 designation Suitable for external and internal turning Universal grade for rostfreie Stähle FAQ What machining tasks is this insert best suited for? This CNMG 090402 AH6225 insert is designed for external and internal turning operations, particularly where a balance of sharp cutting action and edge stability is required for rostfreie Stahl components. Is the insert compatible with standard CNMG holders? Yes, the ISO CNMG geometry of this Tungaloy insert ensures compatibility with standard CNMG toolholders that match the size, thickness and clamping style. How does the AH6225 grade perform on rostfreie Stahl? The AH6225 PVD‑coated carbide provides reliable wear resistance and stable cutting edges under the variable conditions typical of rostfreie Stahl machining, helping to reduce built‑up edge and improve process stability. What finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius offers a fine edge suitable for finishing and light semi‑finishing passes, enabling good surface quality while maintaining dimensional control. Can the insert be used on internal boring operations? Yes, the CNMG 090402 geometry and cylindrical hole location are suitable for many internal turning and boring set‑ups when paired with an appropriate holder and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH6225 Wendeplatten - Tungaloy
Take advantage of a sharp, stable cutting edge and universal PVD-coated AH6225 grade for reliable performance in stainless steel turning; the ISO CNMG form ensures straightforward integration into existing tooling systems. Order this insert through Metav Werkzeuge or consult the Metav team for application-specific guidance. CNMG 090402 AH6225 – Tungaloy ISO turning insert, PVD-coated carbide, 80° The CNMG 090402 AH6225 is an ISO-format rhombic turning insert designed for external and internal turning, providing a balanced combination of a sharp cutting edge and edge stability for variable conditions. PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl machining Rhombic CNMG 80° geometry Double-sided chipbreaker, cylindrical hole Consistent performance for rostfreier Stahl turning The insert is based on a PVD-coated carbide substrate formulated as grade AH6225, which combines a sharp cutting edge with sufficient toughness for medium-duty operations. The coating reduces built-up edge and improves friction behaviour, so the result is a more stable cutting process when machining rostfreier Stahl under varying feed and speed conditions. This means fewer interruptions for edge changes and a steadier surface finish, making the component quality more predictable and repeatable. Secure seating and ISO compatibility for easy integration The rhombic CNMG form with an 80° nose angle and a cylindrical hole offers reliable clamping and straightforward compatibility with ISO-standard holders. The defined relief angle and tolerance class ensure the insert seats correctly, which promotes consistent tool orientation and repeatable geometries across batches. As a result, setup times are reduced and tool changes proceed with predictable alignment, supporting efficient shopfloor workflows. Controlled chip formation for safer, faster cycles The double-sided chipbreaker geometry is optimised to manage chip shape during both external and internal turning, reducing the risk of entangling long swarf. Improved chip control contributes to safer machining and can support higher uninterrupted cycle times. For operations that prioritise process stability, the combination of chip control and the AH6225 grade supports steady material removal without sacrificing tool life. Practical benefits for production use With a corner radius of 0.2 mm and a plate thickness of 4.76 mm, the insert suits medium-precision turning tasks where a fine balance between edge strength and form accuracy is required. The format is double-sided, offering economical indexability, while the PVD coating enhances wear resistance at moderate cutting speeds. For production environments seeking predictable tool performance, this solution offers tangible improvements in uptime and part consistency. For application advice or to request specific batch availability of the Tungaloy CNMG 090402 AH6225 insert, contact Metav Werkzeuge – the Metav team provides practical support and fast delivery options suited to industrial machining needs. Technical data Article number: 6946777 Manufacturer SKU: TUN6946777 SKU: 6946777-Tungaloy Core technical parameters Designation: CNMG090402 Corner radius: 0.2 mm Plate thickness: 4.76 mm Relief angle: 0° Insert geometry: Rhombic, 80° Special features and materials Material: carbide Coating: PVD Grade: AH6225 Chipbreaker: double-sided Mounting: with cylindrical hole Typical application: turning (external and internal) FAQ What materials is this insert suited for? The CNMG 090402 AH6225 insert is specified for rostfreier Stahl and is suitable for a wide range of medium-duty stainless steel turning applications thanks to its universal AH6225 grade. How does the PVD coating benefit machining? The PVD coating on the AH6225 grade reduces friction and helps prevent built-up edge, which improves component finish and extends the interval between indexings for the Tungaloy turning insert. Can this insert be used in existing ISO holders? Yes, the ISO-format CNMG geometry and cylindrical hole ensure compatibility with standard ISO holders when the form, relief angle and tolerance class match the clamping system. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker improves chip control in both external and internal turning, promoting safer machining and enabling longer uninterrupted cutting cycles. What is the recommended corner radius for fine finishes? The insert offers a 0.2 mm corner radius, which balances edge strength with the ability to achieve fine surface finishes on turned components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH6225 Wendeplatten - Tungaloy
Combine a sharp, stable cutting edge with a PVD‑coated cemented‑carbide grade optimised for stainless‑steel turning and ISO compatibility to maintain steady production. Order genuine inserts via Metav Werkzeuge or consult the team for application-specific selection and clamping advice. CNMG 090402 AH6225 — Indexable turning insert for Drehen (Tungaloy) CNMG 090402 AH6225 is an ISO‑standard, rhombic indexable turning insert designed for external and internal turning of stainless steels and similar materials. PVD-coated cemented carbide for stainless steel Sharp, stable cutting edge for medium turning Double-sided insert with cylindrical hole ISO-compliant geometry for standard holders Consistent machining of stainless steels with a universal grade The AH6225 grade is a PVD‑coated cemented‑carbide formulation developed for reliable performance when machining rostfreier Stahl. The coating reduces built‑up edge and improves wear resistance under varying cutting conditions, while the substrate provides a balance between toughness and hardness. For medium cutting operations the combination yields improved surface finish and predictable tool life, making this insert suitable for batch and series production where repeatability is essential. ISO compatibility ensures simple integration into existing tool systems The insert follows the ISO designation and geometry rules for CNMG‑type inserts, so compatibility with standard external holders and boring bars is determined by form, relief (0° rake angle), tolerance class, clamping method, size and thickness. The rhombic profile with an 80° included angle and cylindrical hole enables secure clamping and straightforward replacement, reducing setup time and simplifying inventory management across machines and toolrooms. Productivity gains from double‑sided use and optimised edge design Being double‑sided, the insert offers two effective cutting edges per index, halving the cost per usable edge compared with single‑edged alternatives. The small corner radius (0.2 mm) supports a compromise between edge strength and surface finish, permitting modest depths of cut with stable metal removal. The included chipbreaker geometry is designed to support controlled chip formation, which helps maintain cycle times and reduces the risk of interruption from poor chip evacuation in long or interrupted cuts. Practical application advice for secure process results Selection of the correct chipbreaker and grade is decisive: the AH6225 variety performs best in turning operations where a sharp but robust edge is required. Typical uses are external and internal turning of medium‑hard stainless steels and similar alloys. For interrupted cuts or poor workpiece support, choose a slightly larger corner radius or adjust cutting parameters to reduce shock loads. The insert’s PVD coating and carbide substrate work together to sustain edge stability under variable feeds and speeds, helping to avoid premature wear in mixed‑batch production. For genuine Tungaloy CNMG 090402 AH6225 indexable inserts and targeted application support, contact Metav Werkzeuge for availability and technical consultancy at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6966072 Manufacturer SKU: TUN6966072 Model series: ISO‑Drehwendeschneidplatten Designation: CNMG090402 AH6225 Tungaloy‑Wendeplatte Material: Cemented carbide Facts Insert size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Relief (rake) angle: 0° Included angle: 80° Hole: with cylindrical hole Special features Grade: AH6225 (PVD‑coated cemented carbide) Suitable for: Turning (external and internal) Chipbreaker: double‑sided Shape: rhombic (CNMG) Compatibility: ISO‑standard geometry for standard holders FAQ What applications suit this insert best? The CNMG 090402 AH6225 insert is designed primarily for external and internal turning, especially for rostfreier Stahl and similar alloys where a sharp, stable edge at medium cutting conditions is required. Is the insert reversible and how many usable edges are available? Yes, the insert is double‑sided and provides two cutting edges per index, offering cost‑effective edge rotation and extended service life compared with single‑edged options. How does the AH6225 grade improve process stability? The AH6225 PVD coating reduces built‑up edge and enhances wear resistance, while the carbide substrate provides toughness; together they promote consistent cutting behaviour under variable conditions. Which holder features are essential for correct fitment? Proper fitment depends on the ISO geometry: correct holder form, clearance angle, tolerance class, clamping method, size and thickness ensure secure seating and repeatable cutting performance with this insert. Can the insert handle interrupted cuts? The grade provides a balance of sharpness and toughness, but for severe interruption a larger corner radius or adjusted cutting parameters is advisable to avoid edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced combination of PVD-coated AH8015 carbide and the ISO CNMG 090402 geometry for consistent turning of heat-resistant alloys; the secure cylindrical‑hole clamping and double-sided chipbreaker support repeatable machining and lower downtime. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and process setup. CNMG 090402 AH8015 Turning indexable insert — rhombic 80° (Tungaloy) The CNMG 090402 AH8015 is an ISO‑standard rhombic turning indexable insert engineered for external and internal turning, offering a robust PVD‑coated carbide grade suited to heat‑resistant alloys. PVD-coated carbide grade AH8015 80° rhombic geometry for stable cuts Double-sided chipbreaker for chip control 0.2 mm corner radius for finishing High productivity through balanced wear resistance and edge stability The AH8015 PVD‑coated carbide provides a deliberate balance between wear resistance and cutting-edge stability, making it a solid choice for the general machining of heat‑resistant alloys. The coating enhances flank wear performance at elevated temperatures while the carbide substrate maintains edge integrity under intermittent cutting loads. This combination reduces insert changes and contributes to more predictable tool life, which increases machine uptime and lowers unit costs per component. Secure clamping and standardised geometry for easy integration Built to the ISO CNMG form, the insert features an 80° rhombic geometry and a cylindrical hole for positive axial and radial positioning. The hardened‑centre hole and standardised form ensure compatibility with a wide range of external holders and boring bars when the holder’s form, clearance, tolerance class, fastening and thickness match the insert. The specified 4.76 mm thickness and 0.2 mm corner radius help to define the cutting engagement and are decisive when selecting a holder for repeated, vibration‑controlled turning. Reliable chip control for consistent surface quality The double-sided chipbreaker topology supports controlled fragmentation and evacuation of chips across a range of feeds and depths, aiding process stability and surface finish. A modest 0.2 mm corner radius provides a compromise between smooth finishing and edge strength; it limits burr formation while preserving edge robustness during interrupted cuts. For operators unfamiliar with chipbreaker geometry, its role is to shape the chip curl and reduce the risk of long, entangling swarf that can interrupt automated machining. Practical system considerations and application range This insert is supplied as part of an ISO turning system consisting of the insert, a matching external holder or boring bar, pads/clamping kit and replacement screws. The AH8015 grade is presented as a first choice for the general machining of heat‑resistant alloys, offering broad material coverage and stable chip formation. When specifying tooling for a process, match the chipbreaker and grade to the workpiece material, machining operation and machine stability to achieve the expected productivity gains. For reliable machining of heat‑resistant alloys choose the Tungaloy AH8015 CNMG 090402 insert and contact Metav Werkzeuge for fast supply and holder compatibility advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793716 SKU: 6793716-Tungaloy Manufacturer SKU: TUN6793716 Designation: CNMG090402 AH8015 Tungaloy indexable insert Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core data Insert size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Lead/angle: 80° Hole style: cylindrical hole Special features Coating / grade: AH8015 (PVD-coated carbide) Plate shape: rhombic Chipbreaker: double-sided Application: Turning (external and internal) System components: insert, holder/boring bar, pad/clamping set, screws FAQ What materials is this insert best suited for? The CNMG 090402 AH8015 insert is optimised for the general machining of heat‑resistant alloys; the AH8015 PVD coating and carbide substrate balance wear resistance and edge stability for such materials. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius on the CNMG 090402 insert supports improved surface quality while retaining sufficient edge strength for interrupted or semi‑finishing cuts. Is the insert reversible or single‑use per side? The CNMG 090402 is double‑sided with a reversible geometry; each indexed face offers the same chipbreaker and cutting edge for multiple uses until wear criteria are met. What should be considered when selecting a holder for this insert? Select a holder that matches the ISO CNMG form: the holder must align in form, clearance angle, tolerance class, fastening method, insert size and thickness to ensure secure clamping and repeatable cutting geometry. Does the AH8015 grade require special cutting parameters? AH8015 is designed for a broad range of cutting conditions in heat‑resistant alloys; adjust cutting speed and feed according to machine rigidity and material hardness to exploit the grade’s wear resistance and edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8015 carbide for extended edge life, the double‑sided chipbreaker for flexible use, and the rhombic CNMG geometry for stable turning operations; order the CNMG090402 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090402 AH8015 Tungaloy turning insert for turning The CNMG090402 AH8015 Tungaloy insert is a rhombic, ISO‑standard turning insert designed for precision external and internal turning of heat‑resistant alloys. PVD‑coated carbide grade AH8015 Double‑sided chipbreaker for versatility Rhombic CNMG shape, 80° cutting angle Cylindrical hole, secure face clamping Efficient machining of heat‑resistant alloys with balanced wear resistance The PVD‑coated AH8015 grade combines wear resistance with edge stability, making it suitable as a first choice for general machining of heat‑resistant alloys. The substrate is carbide, optimised to provide consistent performance under elevated temperatures and interrupted cuts. For production environments where tool life and repeatability matter, the coated surface reduces adhesive wear and assists in maintaining dimensional accuracy over longer tool life cycles. The coating also helps to lower built‑up edge formation, which in turn supports stable surface finish and predictable tool change intervals. Geometry and clamping that support reliable turning processes The insert’s rhombic CNMG form with an 80° cutting angle and a 0.2 mm corner radius delivers a compromise between strength and accessibility into tight contours. The plate is double‑sided, offering two usable cutting edges per side, and features a cylindrical hole for secure face clamping on compatible holders. A 0° clearance angle and a plate thickness of 4.76 mm provide rigidity under higher cutting forces. These geometric details determine the contact mechanics with the workpiece and should be matched to the chosen holder and clamping system to ensure optimal repeatability and vibration damping during turning. System considerations and selecting the right chipbreaker In practice, successful turning requires selection of a chipbreaker and grade that suit the workpiece material, machining mode and machine stability. The CNMG format integrates into an ISO‑compliant system comprising an external holder or boring bar, shim/clamp sets and replacement screws; compatibility is governed by form, clearance angle, tolerance class, fixation and plate dimensions. The double‑sided chipbreaker offers flexibility across a range of cutting conditions, while the PVD coating assists with thermal barriers in sustained cuts. For customers less familiar with coating types, PVD (physical vapour deposition) is a thin, hard surface layer that improves wear resistance without substantially altering the insert geometry. For selection advice and supply of Tungaloy CNMG090402 AH8015 inserts contact Metav Werkzeuge for application‑oriented recommendations and immediate assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6946778 Manufacturer SKU: TUN6946778 Model series: ISO‑Drehwendeschneidplatten Name: CNMG090402 AH8015 Tungaloy‑insert Material: Hartmetall Core dimensions ISO designation: 090402 Size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 80° Features and materials Coating / grade: AH8015 (PVD‑coated carbide) Plate form: rhombic (CNMG) Hole style: cylindrical hole Chipbreaker: double‑sided Application: Drehen (external and internal turning) FAQ What materials is this insert intended for? The CNMG090402 AH8015 Tungaloy insert is specified for general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for these materials. Is the insert compatible with standard CNMG holders? Compatibility is determined by plate form, clearance angle, tolerance class, fixation, size and thickness; the CNMG090402 follows ISO dimensions and fits holders designed for CNMG inserts. How many cutting edges are available per plate? The plate is double‑sided with indexed edges, offering multiple usable cutting edges to maximise tool economy during production. What does the PVD coating provide? PVD coating on the AH8015 grade improves wear resistance and reduces adhesive wear, which supports longer tool life and a more stable surface finish in challenging cutting conditions. Which chipbreaker should be chosen for interrupted cuts? For interrupted cuts, select a chipbreaker and grade aligned with the workpiece stability and cutting parameters; the double‑sided chipbreaker on this plate offers flexibility across different turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 cemented‑carbide grade, a precise rhombic 80° geometry and ISO compatibility to secure stable cutting edges and reproducible turning results; order the insert directly via Metav Werkzeuge or consult our technical advisors for tailored recommendations. CNMG 090402 AH8015 – Indexable turning insert (ISO 090402) by Tungaloy A CNMG090402 AH8015 indexable insert designed for general turning of heat‑resistant alloys and other demanding materials, supplied as an ISO‑standard rhombic insert for compatibility with standard holders ISO‑standard rhombic insert, 80° cutting angle PVD‑coated cemented carbide, AH8015 grade Double‑sided chipbreaker for versatile turning Compatible with standard clamping systems Reliable edge life through material and coating The combination of cemented carbide substrate and a PVD coating in the AH8015 grade delivers a balanced mix of wear resistance and edge stability. This grade is specified for the general machining of heat‑resistant alloys, where sustained hardness at elevated temperatures matters. The coating reduces adhesion and flank wear, which in turn supports predictable tool life and fewer unplanned interruptions. For production environments that value reproducibility, the graded hardness and coating chemistry translate into measurable process stability and consistent surface quality. Geometry that improves process efficiency and chip control A rhombic insert form with an 80° cutting angle and a 0° clearance specification provides robust cutting engagement and reduced radial deflection on the workpiece. The 0.2 mm corner radius contributes to a good compromise between edge strength and surface finish. The double‑sided chipbreaker is engineered to control chip shape across a range of feeds and depths of cut, reducing the frequency of chip‑related stoppages and facilitating safer, faster material removal. These geometry choices shorten cycle times by enabling higher material removal rates while maintaining surface integrity. Broad applicability on the shop floor for consistent results Designed as an ISO‑standard turning plate, the insert suits external and internal turning tasks where a durable cutting edge is required. The AH8015 grade has been optimised for heat‑resistant alloys but offers a balanced performance on a wide range of steels and alloys when paired with the correct chipbreaker and machining parameters. Choosing the correct chipbreaker and stable setup leads to higher productivity and lower cost per component, particularly in batch production and mixed‑lot manufacturing where flexibility and repeatability are important. System compatibility, handling and replacement benefits Compatibility with holders is determined by the ISO form, thickness (4.76 mm), size (09) and the clamping and tolerance class. The insert is supplied with a cylindrical hole for secure indexing and retention. System assembly consists of the ISO insert, a matching outside holder or boring bar, a support shim/clamping set and replacement screws. The standardised format simplifies stocking and reduces setup time, while the double‑sided design provides economical indexing and rapid replacement without adjustments to holder geometry. For availability and expert advice on application‑specific grades and holders, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to request tailored recommendations and immediate order processing. Technical Data Article number: 6966073 Manufacturer SKU: TUN6966073 SKU: 6966073-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CNMG090402 AH8015 Facts ISO code: 090402 Cutting angle: 80° Thickness: 4.76 mm Corner radius: 0.2 mm Size: 09 Special features Material: cemented carbide Coating: PVD (AH8015) Plate form: rhombic Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The CNMG090402 AH8015 insert and its AH8015 PVD coating are specified as a first choice for machining heat‑resistant alloys, while offering balanced performance on a range of steels and similar materials when used with the appropriate chipbreaker. Is the insert compatible with standard ISO holders? Yes; the insert conforms to the ISO 090402 form and fits holders and boring bars that accept CNMG‑format plates with a 4.76 mm thickness and the corresponding clamping system. How does the double‑sided chipbreaker benefit production? A double‑sided chipbreaker provides two usable cutting edges, reliable chip formation across varied cuts and easier indexing, which supports uninterrupted production and improves cost efficiency per edge. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius offers a compromise between edge strength and surface finish: it improves robustness against edge chipping while still delivering good surface quality for many turning tasks. Can this insert be used for internal turning operations? Yes; the rhombic shape and the standard hole design allow use in both external and internal turning when mounted in the correct holder and when machining parameters are adjusted for tool reach and rigidity. Which system components are required to mount the insert? Mounting requires a compatible outside holder or boring bar, a support shim/clamping set and the correct replacement screws; the ISO‑standard dimensions ensure interchangeability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, an ISO‑conforming rhombic form and a double-sided chipbreaker to secure stable cutting and consistent edge life; order directly via Metav Werkzeuge or consult the technical team for holder compatibility and availability. CNMG 090402 AH8015 — ISO rhombic turning insert, PVD-coated carbide, Tungaloy CNMG090402 AH8015 is an ISO‑standard rhombic turning insert designed for general turning of heat‑resistant alloys and versatile workshop applications PVD-coated carbide grade AH8015 ISO CNMG 090402 rhombic insert Double-sided chipbreaker for stable cutting Cylindrical hole for secure clamping 0.2 mm corner radius, 80° lead angle Efficient turning of heat‑resistant alloys with balanced wear resistance The PVD-coated carbide grade AH8015 offers a balanced combination of wear resistance and edge stability, making it a reliable choice for machining heat‑resistant alloys in general turning operations. The coating reduces built‑up edge and adhesion at elevated temperatures, which translates into longer intervals between indexings and fewer interrupted production cycles. This results in improved process economy while maintaining dimensional stability on workpieces that demand consistent results. Reduced setup time and dependable clamping for production workflows As an ISO‑standard insert in the CNMG format, compatibility with holders is determined by geometry, relief angle, tolerance class, fastening and plate thickness. The cylindrical hole and standardised form allow secure positioning and repeatable clamping, which reduces setup time during tool changes and supports predictable tool behaviour across different toolholders. Clear component matching minimises fixture errors and helps maintain cycle time in serial production. Consistent surface quality and repeatable edge life for finishing demands The double-sided chipbreaker and a 0.2 mm corner radius contribute to stable chip formation and improved surface quality on external and internal turning operations. The combination of a small corner radius and controlled chip evacuation reduces vibration influence on the cutting edge, yielding a consistent surface finish and repeatable part tolerances. For customers seeking reduced rework and reliable batch uniformity, these characteristics lower overall production costs by limiting scrap and secondary processes. Practical guidance for application selection and process reliability Selection of the correct chipbreaker and grade should follow the workpiece material, machining method and set‑up rigidity. In general turning tasks, the rhombic plate form with an 80° lead angle offers a compromise between strength and accessibility for profile work. For demanding or unstable set‑ups, choosing a holder with adequate support and checking tolerances before machining enhances economical machining and extends the useful life of the cutting edge. When assemblies are complex, matching insert geometry to holder specifications preserves productivity and reduces unplanned downtime. For technical clarification or to secure stock of the CNMG090402 AH8015 insert from Tungaloy, contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6946668 Manufacturer article number: 6946668 Manufacturer SKU: TUN6946668 SKU: 6946668-Tungaloy Designation: CNMG090402 AH8015 Tungaloy insert Facts Corner radius: 0.2 mm Insert size: 09 Thickness: 4.76 mm Lead angle: 80° Relief angle: 0° Special features PVD-coated carbide grade AH8015 Double-sided chipbreaker Cylindrical hole (secure clamping) Rhombic plate form (CNMG) Application: turning; suitable for heat-resistant alloys FAQ What materials is this insert best suited for? The CNMG090402 AH8015 insert is specified for general machining of heat‑resistant alloys; the PVD-coated carbide composition balances wear resistance and edge stability for such materials. Is the insert compatible with standard CNMG holders? Yes — the insert follows ISO CNMG geometry; compatibility depends on holder form, relief angle, tolerance class, fastening and thickness matching. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker provides controlled chip formation on both indexable faces, improving chip evacuation and contributing to a stable cutting edge and consistent surface finish. Can the insert be used for both external and internal turning? The rhombic form and 80° lead angle make the insert versatile for both external and internal turning tasks when paired with an appropriate holder. Which SKU should be referenced when ordering? Use the SKU 6946668-Tungaloy or manufacturer SKU TUN6946668 when ordering or enquiring about stock and compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090402 GT9530 Wendeplatten - Tungaloy
The coated cermet grade GT9530 combines fine‑finishing capability with extended tool life for stable turning operations; its ISO‑standard CNMG form and rhombic 80° geometry ensure reliable seating and reproducible results. Order matching holders and spares via Metav Werkzeuge or consult the team for application advice. CNMG 090402 GT9530 — Turning indexable insert (Tungaloy) The CNMG090402 GT9530 is an ISO‑format indexable insert designed for external and internal turning, offering wear‑resistant finishing performance in stable machining conditions. Coated cermet grade GT9530 for extended life ISO‑standard CNMG insert for turning operations Radial nose radius 0.2 mm for fine finishing Rhombic 80° geometry with central cylindrical hole Achieve consistent finishes with a wear‑resistant cermet grade The coated cermet composition of the GT9530 grade is engineered for wear‑resistant finishing, delivering improved surface quality and longer service intervals when machining steel under stable conditions. Cermet is optimised for low built‑up edge and reduced adhesion, which translates into a more consistent part finish compared with uncoated ceramics. The insert’s small nose radius of 0.2 mm helps produce precise edge definition with minimal tool mark visibility, making it suited to light turning and finishing passes where dimensional accuracy and surface integrity are priorities. Faster setup and predictable process security through ISO compatibility Compatibility with toolholders is defined by ISO designation, relief angle, tolerance class, mounting method, size and thickness, so the CNMG form is widely supported across commercial turning holders. The standardised form of this insert simplifies inventory management and reduces setup time because holders and spare screw kits are interchangeable in many systems. In practice, this means process planners can rely on repeatable clamping behaviour and predictable runout characteristics, which supports higher throughput and lower scrap rates when combined with appropriate holder damping and stable cutting parameters. Geometry and system design that support versatility and tool economy The rhombic 80° geometry provides a balanced approach between accessibility and robustness, while the central cylindrical hole and double‑sided chipbreaker permit reversible indexing to maximise usable edges. With a 4.76 mm thickness and size 09 body, the insert is compatible with common external holders or boring bars and is used together with a shim/clamping set and replacement screws as part of a complete system. The doubled chipbreaker design improves chip control on both cutting directions, and the coated surface enhances resistance to flank wear, extending useful life under steady‑state cutting. For tailored application recommendations for Tungaloy GT9530 inserts and to order compatible holders or spare screws, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797210 Manufacturer SKU: TUN6797210 Metav SKU: 6797210-Tungaloy Model series: ISO turning indexable inserts Full designation: CNMG090402 GT9530 Tungaloy insert Core dimensions ISO code: 090402 Designation: CNMG090402 Size: 09 Thickness: 4.76 mm Nose radius: 0.2 mm Relief angle: 0° Cutting angle: 80° Design & features Shape: Rhombic Hole: with central cylindrical hole Chipbreaker: double‑sided Grade: GT9530 (coated cermet) Application: Turning (external and internal) System composition: insert, suitable external holder or boring bar, shim/clamping set and replacement screws FAQ Which materials is this insert best suited for? The GT9530 grade is a wear‑resistant cermet developed for finishing and light universal use on steel; it provides good surface quality and extended life in stable conditions. Can the insert be used for both external and internal turning? Yes, the CNMG090402 geometry is designed for both external and internal turning when mounted in a compatible holder or boring bar. Is the insert reversible and how does the chipbreaker behave? The insert is double‑sided with a two‑sided chipbreaker, enabling reversible indexing to use multiple cutting edges and improving chip control in both orientations. What are the key dimensions and identification codes to check before ordering? Check designation CNMG090402, ISO code 090402, size 09, thickness 4.76 mm, nose radius 0.2 mm and manufacturer SKU TUN6797210 to ensure correct fit. How is holder compatibility determined for this ISO insert? Compatibility depends on the CNMG form, relief angle 0°, tolerance class, mounting type, size and thickness; these factors determine correct seating and clamping in a given holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090402 GT9530 Wendeplatten - Tungaloy
Achieve consistent finishing and extended tool life through the combination of the GT9530 coated cermet and a fine 0.2 mm corner radius, ensuring stable long-run performance for turning operations; order the insert directly via Metav Werkzeuge or request consultant support for application-specific advice. CNMG 090402 GT9530 indexable insert for turning — Tungaloy A CNMG090402 GT9530 indexable insert engineered for precision external and internal turning, optimised for fine surface finish and prolonged tool life in stable machining conditions GT9530 coated cermet for wear resistance 0.2 mm corner radius for fine surface finishes Double-sided chipbreaker for economical indexing ISO CNMG shape; 4.76 mm plate thickness Consistent surface quality from a wear-resistant grade The GT9530 is a coated cermet developed for wear-resistant finishing and light-general-purpose turning where surface quality and extended life are priorities. Cermet combines a ceramic matrix with metallic binders, which increases hardness and reduces flank wear compared with conventional inserts; this results in more consistent dimensional accuracy and a finer finish on common workpiece materials. In practice, the grade performs best under stable cutting conditions, where reduced built-up edge and predictable flank wear allow longer intervals between indexings and fewer interruptions to production. Precise geometry and quick integration into ISO tooling systems Designed to the ISO CNMG standard, the insert matches common external holders when form, relief angle, tolerance class, fastening, size and thickness are compatible. Key geometry features include a 0° relief angle, a 0.2 mm corner radius and a 4.76 mm thickness, which together deliver predictable cutting forces and controlled chip flow. The presence of a cylindrical hole enables secure fastening and repeatable clamping, while the rhombic shape offers access for both through-tool and conventional turning setups. Where higher stability is available, the double-sided chipbreaker allows economical re-indexing and reduces tooling cost per part. Application guidance for efficient and reliable turning This insert is intended principally for turning tasks that demand fine finishing and reliable life—external and internal profiles, light semi-finishing and finishing passes. When machining harsher or more abrasive alloys, pairing the grade with an appropriate chipbreaker and optimising feed and speed will preserve the cutting edge. The carbide substrate beneath the coating provides impact resistance during interrupted cuts, while the coating reduces adhesive wear during continuous operations. For cycle planning, the double-sided design halves the effective tooling cost by offering two usable edges per insert and simplifies inventory management in production environments. For precision finishing with the GT9530 coated cermet, contact Metav Werkzeuge for tailored application advice and immediate availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6797228 Manufacturer SKU: TUN6797228 SKU: 6797228-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: CNMG090402 GT9530 Tungaloy-Wendeplatte Facts Corner radius: 0.2 mm Included angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 09 Special features Material: carbide Grade/coating: GT9530 coated cermet Shape: rhombic (CNMG) Hole: with hole — cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) ISO designation: CNMG090402 FAQ What materials is this insert best suited for? The GT9530 grade is optimised for turning of common steels and provides improved surface finish and wear resistance when used under stable cutting conditions; select the chipbreaker and parameters according to the specific workpiece material. How does the double-sided chipbreaker affect cost-efficiency? A double-sided chipbreaker offers two usable edges per insert, which reduces tooling cost per edge and simplifies inventory management while maintaining consistent cutting performance. Is the CNMG090402 compatible with standard ISO holders? Compatibility depends on matching form, relief angle, tolerance class, fastening, size and thickness; the insert conforms to ISO CNMG standards, facilitating integration with corresponding external holders. Why is a 0° relief angle specified and what does it mean in practice? A 0° relief angle provides a stable cutting geometry for finishing passes; it reduces clearance requirements and helps maintain consistent cutting forces for superior surface quality. What is the purpose of the cylindrical hole in the insert? The cylindrical hole allows robust and repeatable clamping with compatible screws and pads, improving positional accuracy and reducing the risk of movement during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and low cutting forces for efficient production. The uncoated cermet grade NS9530 and the 0.2 mm nose radius ensure consistently high surface quality and reduced rework. Order the inserts directly via Metav Werkzeuge or request advice from our consultants for application-specific recommendations. CNMG 090402 NS9530 Tungaloy indexable turning insert (ISO 090402) The CNMG 090402 NS9530 is an ISO-format indexable turning insert designed for finishing steel; it provides a sharp cutting edge and low cutting forces for continuous turning operations. ISO-formatted CNMG 090402 insert Uncoated cermet NS9530 for finishing Sharp cutting edge for low cutting forces 0.2 mm nose radius, rhombic 80° geometry Double-sided chipbreaker, with cylindrical hole Optimised finishing performance with minimal cutting forces The combination of an uncoated cermet grade and a fine 0.2 mm nose radius makes this insert particularly well suited to finishing passes on steel where surface integrity and dimensional accuracy are critical. The NS9530 grade provides a sharp cutting edge that reduces cutting forces and the tendency for built-up edge during continuous cuts, which in turn lowers spindle load and improves feed stability. For production environments that prioritise surface quality and repeatability, this insert reduces downstream polishing or rework and supports stable cycle times. ISO compatibility and secure clamping for reliable tool changeovers Delivered in the ISO 090402 format, the insert fits standard holders when matching is made by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic 80° geometry and 0° clearance are common in turning holders, simplifying holder selection and inventory management. The central cylindrical hole ensures positive seating and repeatable clamping torque, while the double-sided chipbreaker permits indexation, doubling the available cutting edges per insert and reducing tool change frequency. This standardisation supports predictable set-up times and consistent part quality. Material, grade and process benefits explained Built on a carbide substrate with an uncoated cermet cutting material, this insert balances edge sharpness and wear resistance for finishing on steels. The design emphasises low cutting forces and excellent surface finish rather than heavy-duty roughing; it is therefore best selected for small depths of cut and continuous feed conditions. The double-sided configuration provides economical usage of the carbide body, while the precise geometry helps maintain stable chip formation and reduces the risk of vibration in light-turning operations. Using the correct chipbreaker and matching the grade to the workpiece material will extend insert life and secure repeatable results. Practical application and productivity advantages For external and internal turning, the insert excels in producing fine surface finishes and tight tolerances on steel components. When combined with a suitably rigid holder and correct clamping, the geometry minimises spring-in and promotes steady cutting. The predictable performance of the ISO-format insert reduces inspection failures and supports higher first-pass yields. Specifying this grade for finishing steps can lower cycle times by decreasing secondary operations and by enhancing tool-change planning through indexable use. For application guidance or to secure a batch of CNMG 090402 NS9530 Tungaloy inserts for finishing operations, contact Metav Werkzeuge for a tailored recommendation and rapid supply. Technical data Article number: 6797235 Manufacturer SKU: TUN6797235 Model series: ISO turning indexable inserts Label / product name: CNMG090402 NS9530 Tungaloy indexable insert Facts Insert size: 09 Thickness: 4.76 mm Nose radius: 0.2 mm Geometry angle: 80° Clearance angle: 0° Special features Material: carbide substrate Grade: uncoated cermet NS9530 Shape: rhombic Hole: with hole, cylindrical hole style Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The CNMG 090402 NS9530 insert is formulated as a finishing grade for steel; the uncoated cermet composition delivers a sharp edge and low cutting forces ideal for continuous turning on steel. How does the double-sided chipbreaker affect productivity? Using the double-sided chipbreaker allows indexation of the insert, effectively doubling usable edges and reducing the frequency of insert replacements in production. Is this insert compatible with standard ISO holders? Yes; the ISO 090402 format, the rhombic 80° geometry and the 0° clearance support compatibility with standard turning holders when form, fastening and tolerance class match. What cutting conditions are recommended for the NS9530 grade? The NS9530 uncoated cermet is optimised for finishing passes with small depths of cut and continuous feeds to achieve high surface quality and reduced cutting forces. Does the insert require a coated variant for abrasive materials? For more abrasive or interrupted cutting conditions, a coated or differently graded insert should be considered; the listed insert is primarily tailored for fine finishing on steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of an uncoated cermet cutting grade and an ISO-standard rhomboid geometry for consistent finishing results and low cutting forces; order directly via Metav Werkzeuge or request application advice from our consultants. CNMG090402 NS9530 Tungaloy indexable insert — ISO turning insert, uncoated cermet, 0.2 mm corner radius A CNMG090402 NS9530 Tungaloy indexable insert designed for precision external and internal turning, optimised for fine finishing of steel components. ISO-standard rhomboid geometry for broad compatibility Uncoated cermet grade NS9530 for fine finishing 0.2 mm corner radius for precise surface control Double-sided insert with cylindrical hole for secure fixing Consistent finishing and reliable cutting performance The insert combines a cermet cutting grade with a sharp edge geometry to deliver low cutting forces and an excellent surface finish on steel. Cermet is a ceramic–metal composite that maintains a fine edge longer than many cemented carbides in finishing operations; this makes it particularly suitable for continuous cuts and small depths of cut where surface quality is the priority. The result is reduced rework and more predictable process outputs in series production. Secure mounting and holder compatibility reduce setup time Designed to ISO dimensions, the rhomboid shape and cylindrical hole ensure reliable clamping in standard turning holders. Compatibility is governed by form, relief angle and tolerance class, so the insert fits a wide range of external holders and boring bars when the correct seat and fastenings are used. The double-sided design doubles the usable life per index, improving cost-efficiency without complicating the tool change procedure. Technical advantages for finishing operations With a 0.2 mm corner radius and a relief angle of 0°, the geometry supports delicate engagement with the workpiece, lowering vibration and enabling consistent dimensional control. The uncoated NS9530 grade preserves a razor-sharp cutting edge that produces minimal built-up edge, which in turn helps to maintain tight surface roughness figures and repeatable part quality across batches. Practical use and process guidance The insert is best applied for turning operations where fine surfaces and low cutting forces are required. As an ISO-standardised component, it fits established tool systems and streamlines inventory management. For those unfamiliar with cermet characteristics, the main practical benefit is a longer edge retention in finishing, reducing the frequency of index changes and contributing to smoother workflows on the shop floor. For application advice or to secure the CNMG090402 NS9530 Tungaloy indexable insert for your next production run, contact Metav Werkzeuge for expert recommendations and fast delivery options. Technical data Article number: 6966074 SKU: 6966074-Tungaloy Manufacturer SKU: TUN6966074 Designation: CNMG090402 NS9530 Tungaloy indexable insert Core data Corner radius: 0.2 mm Relief angle: 0° Included angle: 80° Plate thickness: 4.76 mm Size: 09 ISO code: 090402 Special features Material: carbide Cutting grade: uncoated cermet NS9530 Geometry: rhomboid (CNMG) Hole style: cylindrical hole, with hole Double-sided insert Typical application: turning (external and internal) Suitable for fine finishing and continuous cuts FAQ What machining tasks suit this insert best? This insert is intended for precision external and internal turning, particularly finishing cuts on steel where low cutting forces and a high surface finish are required. How does the NS9530 grade affect tool life and finish? The NS9530 uncoated cermet grade provides a sharp cutting edge with good edge retention for finishing operations, helping the insert maintain part quality over longer runs. Is the CNMG090402 insert compatible with standard ISO holders? The ISO-standardised CNMG geometry and cylindrical hole mean the insert is compatible with a wide range of standard turning holders when the correct seat and fastening are used. Can this insert be indexed to use both sides? Yes, the insert is double-sided, offering two cutting edges per side and improving cost-efficiency through extended usable life. Which materials is the insert primarily recommended for? The grade and geometry are optimised for machining steel in finishing operations; continuous cuts and small depths of cut are typical use cases. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 NS9530 Wendeplatten - Tungaloy
Take advantage of a sharp uncoated cermet cutting edge and 0° clearance for superior finishing and low cutting forces; the ISO CNMG090402 form and robust double-sided chipbreaker support reliable, productive turning operations — order or request guidance via Metav Werkzeuge. CNMG090402 NS9530 Tungaloy turning insert — uncoated cermet finishing grade for turning CNMG090402 NS9530 is a rhombic ISO insert for finishing turns and internal profiling, engineered to deliver low cutting forces and excellent surface quality. Cermet finishing grade NS9530 Sharp cutting edge for low forces 80° rhombic shape, 0° clearance Double-sided chipbreaker with cylindrical hole Consistent finishing performance for steel turning The NS9530 grade is an uncoated cermet developed for finishing operations on steel, providing a consistently sharp cutting edge that reduces cutting forces and improves part appearance. For continuous cuts and small depths of cut the composition and edge geometry help lower built-up edge and preserve dimensional accuracy. The result is a measurable improvement in surface quality with reduced rework, making the insert particularly suitable where high finish standards are required. Reliable ISO compatibility and secure clamping Delivered in the ISO CNMG090402 format, the insert's compatibility with toolholders depends on shape, clearance angle, tolerance class, fixation, size and thickness. The rhombic 80° geometry and 0° clearance ensure predictable tool orientation, while the 4.76 mm thickness and size 09 conform to common ISO holders. Selecting a matching external holder or boring bar and the correct clamping pad preserves edge life and contributes to stable cutting conditions, reducing vibration and cycle-time variability. Operational efficiency through chip control and indexing A double-sided chipbreaker improves chip formation and evacuation during continuous finishing passes, while the cylindrical hole accommodates standard clamp systems for secure retention. Being indexable on multiple edges extends usable life per insert and reduces tooling costs per component. In production contexts where throughput and repeatability matter, the combination of sharp cermet edge and effective chip control enhances both productivity and process reliability. Contact Metav Werkzeuge for application advice and to source genuine Tungaloy CNMG090402 NS9530 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797209-Tungaloy Manufacturer SKU: TUN6797209 Manufacturer article number: 6797209 Label: CNMG090402 NS9530 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Core data Included angle: 80° Corner radius: 0.2 mm Plate thickness: 4.76 mm Plate size: 09 Clearance angle: 0° Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Rhombic plate form (CNMG) Cylindrical hole ISO designation CNMG090402 Compatible with ISO holders FAQ What materials is this grade suitable for? The NS9530 uncoated cermet grade is engineered for finishing on steel and is particularly effective in continuous turning where a fine surface finish is required; the CNMG090402 NS9530 insert (SKU 6797209-Tungaloy) offers a sharp edge tailored to low cutting forces. Which turning operations is the insert intended for? The insert is intended for external and internal turning, especially finishing passes and small depths of cut where surface quality and low cutting forces are priorities; the double-sided chipbreaker supports stable chip formation in these applications. Is the insert coated? No — this is an uncoated cermet insert (NS9530), optimised for sharpness and superior finishing rather than coated wear resistance. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker improves chip control and allows indexing to the opposite cutting edge, extending usable tool life and reducing tooling costs per part in serial production. How can compatibility with a holder be verified? Compatibility is determined by the insert form (CNMG), clearance angle, tolerance class, fixation method, size 09 and 4.76 mm thickness; verify these parameters against the chosen holder specifications before assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 NS9530 Wendeplatten - Tungaloy
Benefit from a combination of high-surface finish and low cutting forces thanks to the NS9530 cermet grade, paired with a stable 80° rhombic geometry and precise clamping compatibility for uninterrupted production. Order these ISO turning inserts directly via Metav Werkzeuge or consult the team for process-matched recommendations. CNMG 090402 090402 NS9530 — Tungaloy ISO turning insert for finishing CNMG090402 NS9530 is a precision ISO turning insert engineered for finishing turning operations on steel, offering a sharp cermet edge for excellent surface quality. CNMG 090402 80° rhombic insert NS9530 uncoated cermet finishing grade Sharp edge for low cutting forces Double-sided chipbreaker for stable chips Cylindrical hole and 0.2 mm corner radius Exceptional surface quality with low cutting effort The NS9530 uncoated cermet grade is formulated specifically for finishing applications on steel, delivering a sharp cutting edge that reduces cutting forces and improves surface integrity. As a consequence of the material's chip-shearing behaviour, operators benefit from fewer vibrations and a more consistent finish during continuous cuts and small depth-of-cut operations. Compatibility with ISO tooling systems ensures predictable performance when paired with an appropriate external holder or boring bar. Geometry and clamping that enhance process stability The rhombic 80° geometry combined with a 0.2 mm radius provides a balance between edge strength and fine surface generation, while the 0° clearance supports accurate profile reproduction. The insert is supplied with a cylindrical hole for positive indexing and repeatable clamping, and the double-sided chipbreaker aids chip control across both cutting edges. Together these features increase rigidity, reduce chatter risk and allow longer uninterrupted cycles in production environments. Practical system considerations and application advice Designed as an ISO indexable insert, the component integrates into a system consisting of the insert, a suitable external holder or boring bar, a shim/clamping kit and replacement screws; compatibility depends on insert form, clearance, tolerance class, fastening method, size and thickness. This grade excels in external and internal turning where a fine finish is required; selecting the correct chipbreaker and holder for the workpiece stability will extend edge life and maintain consistent surface quality. For process optimisation, consult data sheets on recommended speeds and feeds for continuous cuts with small ap values. For precision finishing with Tungaloy NS9530 inserts, contact Metav Werkzeuge for tailored advice and fast supply coordination Technical Data Article number: 6797227 Manufacturer SKU: TUN6797227 Label: CNMG090402 NS9530 Tungaloy turning insert Manufacturer: Tungaloy Model series: ISO turning inserts Facts Angle: 80° Corner radius: 0.2 mm Clearance angle: 0° Thickness: 4.76 mm Size: 09 Hole: cylindrical Chipbreaker: double-sided Special features Material: cemented carbide (carbide body) Cutting material type: uncoated cermet NS9530 Application: turning (finishing) System build: ISO insert, holder or boring bar, shim/clamping set, replacement screws Suitable for continuous cuts and small depths of cut Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert optimised for? The NS9530 cermet grade is optimised for finishing operations on steel and is particularly effective where a high surface quality and low cutting forces are required. Can the insert be used for both external and internal turning? Yes, the ISO-format insert is suitable for both external and internal turning when mounted in a compatible external holder or boring bar. How does the cylindrical hole affect clamping and indexing? The cylindrical hole provides positive indexing and repeatable clamping, improving positional accuracy and enabling reliable edge changes on the CNMG090402 NS9530 insert. What process benefits does the double-sided chipbreaker provide? The double-sided chipbreaker supports consistent chip formation and evacuation on both cutting edges, enhancing process stability and reducing the risk of chip-related interruptions. Which system components are needed to fit this insert? A complete system includes the ISO insert, a matching external holder or boring bar, a shim/clamping kit and replacement screws; compatibility depends on geometry and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T6215 Wendeplatten - Tungaloy
Take advantage of a proven combination of CVD‑coated carbide and precise geometry to maintain productive turning of stainless steels with consistent chip control and long tool life; order directly via Metav Werkzeuge or contact our technical consultants for compatibility advice. CNMG 090402 T6215 Turning insert — Tungaloy The CNMG090402 T6215 is an ISO‑standard rhombic turning insert designed for external and internal turning, optimised for machining stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Rhombic 80° geometry with 0° clearance angle 0.2 mm corner radius for robust cutting edges Cylindrical hole, ISO-compatible mounting Consistent chip control for stainless steel turning The CVD‑coated carbide substrate delivers reliable wear resistance when machining stainless steels, reducing flank wear and maintaining dimensional stability over longer runs. The insert’s double‑sided chipbreaker is engineered to control swarf formation under steady cutting conditions, which leads to more predictable cycle times and fewer interruptions. This precision behaviour supports improved process stability and fewer component reworks, particularly in serial production. Geometry and mounting for secure, repeatable performance An 80° rhombic geometry combined with a 0° clearance angle provides a balanced cutting profile that supports both external and internal operations, while the cylindrical hole enables secure fastening in ISO‑compatible holders. The 0.2 mm corner radius increases edge strength without compromising the ability to achieve close tolerances, resulting in reproducible surface finishes and reduced risk of chipping during medium‑duty turning tasks. Substrate and coating engineered for longer tool life The toolgrade T6215 is a CVD‑coated carbide grade formulated for wear resistance in corrosive and adhesive materials typical of stainless steels. The coating reduces adhesion tendencies and heat‑related wear, extending the interval between indexings. For manufacturers seeking economical throughput, this combination of substrate and coating contributes to lower tool consumption and consistent part quality over extended production runs. Practical application guidance to improve process outcomes Use the insert in stable setups with appropriate rigidity to exploit its chip control and coating properties; select the chipbreaker and grade when matching material, cut depth and machine stability. The ISO‑standard form ensures compatibility with a broad range of holders, simplifying inventory management and enabling quick changeovers between part families. For interrupted cuts, verify clamping and feed settings to maintain edge life and consistent surface integrity. For reliable stainless steel turning with the Tungaloy T6215 grade, contact Metav Werkzeuge for technical consultation or to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944494 Manufacturer SKU: TUN6944494 SKU: 6944494-Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data ISO designation: 090402 Size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 80° Relief angle: 0° Designs / Special features CVD-coated carbide (T6215) Rhombic plate form Double-sided chipbreaker Cylindrical hole for ISO mounting Suitable for turning stainless steels under stable to slightly interrupted conditions FAQ What materials is this insert suitable for? The Tungaloy CNMG090402 T6215 insert is specified for machining stainless steels, with the CVD coating and substrate tailored to resist adhesive wear common in these alloys. Is the insert compatible with standard ISO holders? Yes, the rhombic CNMG090402 form and cylindrical hole comply with ISO standards and fit matching ISO toolholders when the holder geometry and tolerances match. How does the T6215 grade affect tool life? The T6215 CVD‑coated carbide offers enhanced wear resistance and heat tolerance, which typically extends tool life and reduces flank wear in steady turning operations. Can this insert be used for interrupted cuts? The insert is designed for stable to slightly interrupted conditions; for severe interruptions, review setup rigidity and cutting parameters before use to avoid premature edge chipping. What are the key geometric features to consider when specifying a holder? Consider the 80° rhombic geometry, 0° clearance angle, 0.2 mm corner radius and the plate thickness (4.76 mm) to ensure correct fit and clamping in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade and CNMG geometry for reliable wear resistance and consistent chip control; this insert supports stable to lightly interrupted turning of stainless steels while remaining compatible with ISO holders. Order the CNMG090402 T6215 Tungaloy insert directly via Metav Werkzeuge or consult their advisors for application guidance. CNMG090402 T6215 CNMG ISO 090402 — Tungaloy indexable insert for turning A CNMG090402 T6215 indexable turning insert engineered for external and internal turning, offering a wear-resistant CVD coating and a double-sided chipbreaker for controlled chip formation. CVD-coated carbide grade T6215 Rhombic CNMG 09 geometry, 0° clearance Double-sided chipbreaker, good chip control Compatible with ISO turning toolholders Consistent surface finish through controlled chip formation The combination of a CVD-coated surface and a wear-resistant carbide substrate delivers extended edge life under typical turning loads. The integrated double-sided chipbreaker reduces the risk of long, stringy chips and promotes repeatable chip segmentation; this reduces interruptions and contributes to a predictable surface finish during both external and internal turning operations. The insert’s 0° clearance and rhombic CNMG geometry help maintain stable cutting engagement, while the CVD layer resists abrasive wear common when machining stainless steels. Straightforward indexing and broad ISO compatibility Constructed to the ISO CNMG form, the indexable plate features a central cylindrical hole and standard dimensions that support secure mounting in many commercial holders. Compatibility with a holder depends on geometry, clearance angle, tolerance class, fastening method, size and thickness; the modular system comprises an ISO insert, a matching external holder or boring bar, a shim/clamping kit and replacement screws. Quick indexing restores a fresh cutting edge without complex setup, enabling efficient tool management and reduced machine downtime. Productivity gains in stable and lightly interrupted turning The T6215 grade offers a balance between wear resistance and toughness suitable for machining stainless steels under stable to slightly interrupted conditions. This yields longer tool life and lower cost per component in medium- to high-volume production runs. The insert’s rhombic 09 size and 80° included angle provide rigidity for heavier cuts while remaining versatile for finishing passes. For process engineers, the result is a measurable improvement in cycle-time consistency and fewer unscheduled tool changes. Contact Metav Werkzeuge today for tailored advice on using Tungaloy T6215 inserts in your turning processes and to check current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944523 Manufacturer SKU: TUN6944523 SKU: 6944523-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMG090402 T6215 Tungaloy insert Facts Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle: 09 Included angle: 80° Clearance angle: 0° Plate form: Rhombic Special features Material: carbide Coating / grade: CVD-coated, T6215 Chipbreaker: double-sided Hole: with cylindrical hole Free angle: 0° Application: turning (external and internal) Suitable for: stainless steels under stable to lightly interrupted conditions System components: ISO insert, matching holder/boring bar, shim/clamping kit, spare screws FAQ Which materials is this insert suitable for? The CNMG090402 T6215 Tungaloy indexable insert is specified for machining stainless steels and performs well under stable to lightly interrupted turning conditions. Is the CNMG090402 compatible with standard ISO toolholders? Yes, the CNMG090402 conforms to ISO CNMG geometry; compatibility depends on holder shape, clearance angle, tolerance class, attachment method, size and thickness, so match the insert to an ISO holder with the correct specifications. What is the coating and what are its benefits? The insert uses a CVD-coated carbide in grade T6215, providing a wear-resistant surface that improves flank and crater wear behaviour during turning of stainless steels. How does the chipbreaker affect machining? The double-sided chipbreaker on the CNMG090402 promotes controlled chip segmentation and safer chip evacuation, aiding in consistent surface finish and reduced risk of chip-related interruptions. What should be considered when selecting a holder and clamping system? Selection should account for the insert’s rhombic geometry, 0° clearance, thickness and central hole style; the typical system includes the ISO insert, a compatible external holder or boring bar, a shim/clamping kit and suitable replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO CNMG090402 geometry and a double-sided chipbreaker for consistent stainless steel turning performance; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal machining setups. CNMG090402 T6215 CNMG 090402 Turning Insert by Tungaloy — CVD-coated carbide for stainless steel turning A CNMG090402 T6215 indexable turning insert designed for ISO-compatible holders, providing wear-resistant performance in stable to lightly interrupted turning of stainless steel. CVD-coated carbide grade T6215 ISO CNMG090402 rhombic insert Double-sided chipbreaker for stability Cylindrical central hole for secure clamping High-performance grade for stainless steel turning The insert uses a CVD-coated carbide substrate, T6215, developed for prolonged tool life when machining stainless steel. The coating improves wear resistance at the cutting edge, reducing flank wear and preserving geometry under continuous operation. For production environments this translates into fewer tool changes and more predictable component quality. The wear behaviour of the grade is suited to stable to slightly interrupted cuts, so the benefit is lower process downtime and improved machining economy. Precise geometry and secure clamping for repeatable results Configured as an ISO CNMG rhombic insert with an 80° included angle and 0° clearance, the geometry supports robust cutting engagements while maintaining form accuracy. The cylindrical central hole and standard tolerance classes ensure consistent seating in compatible holders, while the 4.76 mm plate thickness and 0.2 mm corner radius enable reliable strength and defined corner transitions. These characteristics reduce vibration and help achieve repeatable dimensional control when paired with a correctly matched holder. Improved chip control and machining stability The double-sided chipbreaker offers chip control adapted to turning operations, guiding swarf away from the cutting zone and reducing the risk of re-cutting. Stable chip formation contributes to better surface finish and predictable cycle times, especially when machining long or contoured stainless parts. The insert’s combination of geometry and chipbreaker design supports higher process reliability, which is particularly valuable in batch production and when consistent surface integrity is required. Practical guidance for selection and integration The insert is part of an ISO-indexable system: select a suitable external holder or boring bar that matches the insert form, clearance angle, thickness and fastening method. When integrating into a toolset, consider the workpiece material, depth of cut and stability of the setup to choose the most effective chipbreaker and cutting parameters. If uncertain about holder compatibility or optimal cutting data, the technical team at Metav Werkzeuge can advise on clamping options and parameter tuning to maximise tool life and component quality. For tailored machining advice or to confirm holder compatibility for the CNMG090402 T6215 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss recommended setups and product availability. Technical Data Manufacturer article number: 6944488 Manufacturer SKU: TUN6944488 Internal SKU: 6944488-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Plate size: 09 Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Corner radius: 0.2 mm Special features Grade/coating: T6215, CVD-coated carbide Plate shape: rhombic Hole: with hole (cylindrical) Chipbreaker: double-sided Typical application: turning stainless steel System: ISO indexable insert series FAQ What materials is this insert intended for? The CNMG090402 T6215 insert is designed primarily for machining stainless steel and performs best in stable to lightly interrupted turning conditions. How does the insert secure to the holder? The insert features a cylindrical central hole and ISO-standard form that allow secure clamping in compatible external holders or boring bars when assembled with the correct clamping set and screw. Can this insert be used for interrupted cuts? Yes, the T6215 grade is formulated for stable to lightly interrupted machining; heavier interruptions may require a different geometry or grade for optimal performance. What benefits does the CVD coating provide? The CVD coating on this carbide grade improves wear resistance and edge life, leading to longer tool life and more consistent surface quality during production turning. Is the chip control suitable for long-turning operations? The double-sided chipbreaker supports improved chip guidance and is beneficial for many turning tasks, helping to maintain surface finish and reduce the risk of re-cutting chips. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, precise ISO CNMG geometry and a CVD-coated carbide grade to keep turning operations productive and repeatable. Order the genuine insert via Metav Werkzeuge or request application advice from our consultants for optimal holder compatibility. CNMG 090402 T6215 Tungaloy turning insert — ISO rhombic, 80° geometry for turning A CNMG090402 T6215 indexable insert designed for external and internal turning, offering wear-resistant CVD-coated carbide for stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 ISO rhombic CNMG 09, 80° geometry 0.2 mm nose radius for improved surface finish Cylindrical hole and double-sided chipbreaker Maximum process stability through advanced coating and grade The CVD-coated carbide composition of this insert delivers consistent wear resistance and prolonged edge life under standard and slightly interrupted cuts, which reduces changeover frequency and tool inventory. The T6215 grade is tailored for turning stainless steels where adhesion and built-up edge are common concerns; the coating limits surface diffusion and abrasive wear. In practical terms, this means fewer rejects and longer uninterrupted machining cycles, supporting a predictable production cadence and lower unit cost over time. Precise geometry for secure clamping and fine surface quality The ISO CNMG rhombic form with an 80° cutting angle and a 0.2 mm nose radius enables a balance between robustness and surface finish. The cylindrical hole provides reliable mechanical location in compatible holders, while the double-sided chipbreaker permits indexing to a fresh edge and maintains controlled chip formation. For users less familiar with tooling language: an indexable insert such as this is designed to be clamped into a matching holder; the specified form, clearance and thickness determine compatibility and performance, so matching holder geometry and tolerance class is essential for achieving the stated benefits. Designed for efficient turning workflows and flexible applications Configured for conventional turning tasks, the insert supports both external and internal operations when combined with the appropriate holder and clamping set. The double-sided design effectively halves tooling cost per usable edge compared with single-sided alternatives, while the CVD coating and substrate combination ensure stable edge life in repetitive production runs. Choosing the right chipbreaker and grade for the workpiece material and machining stability will result in predictable surface quality and fewer tool-indexing events, helping to keep cycle times tight and throughput high. For tailored tooling recommendations or to procure genuine Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and batch supply options. Technical Data Manufacturer SKU: TUN6966070 Article number: 6966070 SKU: 6966070-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Nose radius: 0.2 mm Plate thickness: 4.76 mm Insert size: 09 Insert angle: 80° Clearance angle: 0° Special features Shape: rhombic (CNMG) Grade/coating: T6215, CVD-coated carbide Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) Material: carbide FAQ Is this insert suitable for stainless steel machining? Yes. The T6215 CVD-coated grade in this CNMG090402 insert is formulated for turning stainless steels under stable to lightly interrupted conditions, providing improved wear resistance and surface quality. How does the CNMG 09 geometry affect holder selection? Holder compatibility depends on the insert form, clearance, tolerance class, fastening method, size and thickness; the CNMG 09 rhombic geometry and 80° angle require a matching ISO CNMG external or internal holder. Can the insert be indexed to use both cutting edges? Yes. This is a double-sided indexable insert with a cylindrical hole and a double-sided chipbreaker, allowing rotation to a fresh edge to extend tool life and reduce tooling cost per edge. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius supports finer surface finishes and lower cutting forces compared with larger radii, making it suitable for operations where improved part appearance and tighter tolerances are desired. Which components are required for a complete turning setup with this insert? A complete system includes the ISO indexable insert, a compatible external or internal holder or boring bar, a backing/locking set and replacement screws; correct holder matching ensures repeatable positioning and cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 for high wear resistance and ISO‑standard geometry for reliable holder compatibility; the defined 0.2 mm corner radius and double‑sided chipbreaker support steady productivity in medium‑steel turning. Order the insert directly via Metav Werkzeuge or consult the team for application matching. CNMG090402 T9215 – ISO turning insert, CVD‑coated carbide, 0.2 mm radius | Tungaloy The CNMG090402 T9215 is an ISO‑indexable turning insert designed for medium‑steel machining, offering a rhombic form with a cylindrical central hole, double‑sided chipbreaker and a 0° relief angle for stable external and internal turning operations. CVD‑coated carbide T9215 for medium steel ISO rhombic insert, size 09 0.2 mm corner radius for defined cutting edge Double‑sided chipbreaker with cylindrical hole Reliable material removal for continuous production The CVD‑coated T9215 grade provides a balance of wear resistance and fracture toughness that supports sustained machining under continuous to slightly interrupted cuts. As a carbide indexable insert, it is optimised for medium‑strength steel where consistent tool life and minimal downtime contribute directly to production efficiency. The coating reduces flank wear and helps maintain dimensional stability across longer tool lives, which in turn lowers total machining costs per component. Defined edge geometry for consistent surface finish With a 0.2 mm corner radius and a rhombic 09 form, the insert gives a repeatable cutting geometry that aids in achieving uniform surface finishes and predictable tool behaviour. The 0° relief angle contributes to controlled cutting forces and a clear contact geometry between insert and workpiece. For applications requiring tight tolerances, the precise edge definition reduces the need for frequent adjustments and ensures reproducible results across batches. System compatibility and straightforward integration ISO‑standard designation ensures compatibility with a wide range of holders; compatibility is determined by insert shape, relief angle, tolerance class, clamping style, size and thickness. The CNMG090402 format, with a cylindrical hole and standard mounting, simplifies replacement and reduces setup time in mixed‑tool environments. Clear ISO conformity also helps when specifying tool inventories and matching inserts to existing toolholders in the toolroom. Grade and chip control tuned to the task The double‑sided chipbreaker geometry supports efficient chip formation and evacuation when machining steel, while the CVD coating helps manage heat and abrasive wear. The T9215 grade is recommended as a first choice for medium‑steel applications where a compromise between productivity and tool life is needed; selecting the chipbreaker and grade according to workpiece stability and cutting conditions yields the best balance of surface quality and throughput. Contact Metav Werkzeuge for a tailored recommendation on holder compatibility and application‑specific cutting data for the Tungaloy CNMG090402 T9215 turning insert Technical data Manufacturer article number: 6782304 Manufacturer SKU: TUN6782304 SKU: 6782304-Tungaloy Model series: ISO‑indexable turning inserts Designation: CNMG090402 T9215 Dimensional data Size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 80° Material and features Material: carbide Coating: CVD Grade: T9215 Chipbreaker: double‑sided Hole: with cylindrical hole Shape: rhombic Application: turning Typical use: medium steel, continuous to slightly interrupted cuts FAQ What workpiece materials are suitable for this insert? The CNMG090402 T9215 insert is developed for medium‑steel machining; the T9215 CVD‑coated carbide provides wear resistance and toughness appropriate for a broad range of steel grades. Can the insert be used for both external and internal turning? Yes. The rhombic form, 0° relief and double‑sided chipbreaker make the insert suitable for both external and internal turning applications when combined with a compatible holder. How does the chipbreaker influence performance? The double‑sided chipbreaker on the CNMG090402 promotes controlled chip formation and evacuation, improving surface finish and reducing risk of built‑up edge during steady cutting conditions. What should be considered when matching holders? Holder compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; use the ISO‑conformant geometry of the CNMG090402 to select a matching external holder or boring bar. Is this insert indexable on both sides? Yes; the double‑sided design permits indexation to the unused cutting edge, extending service life per insert and offering economical use in production settings. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com