CNMA 160612 T5125 Wendeplatten - Tungaloy
Combine CVD-coated carbide durability with a 1.2 mm corner radius and robust geometry for reliable performance in interrupted cuts; order the CNMA160612 insert directly via Metav Werkzeuge or consult our technical advisors for tailored selection support. CNMA 160612 T5125 — Turning indexable insert, rhombic 80°, Tungaloy The CNMA160612 T5125 is an ISO-format indexable insert for turning, engineered for external and internal machining and optimised for cast iron under interrupted cutting conditions. ISO turning insert CNMA 160612 T5125 CVD-coated carbide grade T5125 Rhombic shape with 80° included angle 1.2 mm corner radius, 6.35 mm thickness Stable cutting under interrupted conditions for predictable productivity The CVD-coated carbide formulation and the tougher T5125 grade deliver increased resistance to chipping during interrupted cuts, which translates into fewer unplanned tool changes and more consistent cycle times. The combination of a rhombic plate form and an 80° included angle provides a balance between edge strength and versatility for turning tasks. By selecting a grade designed for less stable conditions, operators gain improved process stability and a clearer path to maintaining production throughput on mixed or challenging workpieces. Simple integration in ISO tool systems for fast tool changes As an ISO-standard indexable insert, compatibility is determined by plate form, clearance angle, tolerance class, fastening method, size and thickness. The CNMA format with a cylindrical hole and specified dimensions (16 mm across, 6.35 mm thickness) fits common external holders and boring bars when matched correctly. Knowing the insert’s key parameters — including the 0° clearance angle and 1.2 mm corner radius — helps machining planners choose an appropriate holder and clamping set, reducing setup time and minimising ambiguity at the machine. Material focus and surface quality advantages for cast iron components The T5125 composition is tailored for machining cast iron, providing predictable chip control and a compromise between toughness and wear resistance. In practice, this means more consistent surface finish and repeatable part geometry when turning both external and internal features. Selecting the correct chipbreaker and inserting a grade matched to the part material reduces the risk of edge failure and supports extended tool life, improving overall cost-efficiency per component and lowering scrap rates in production. Practical guidance for selection and application Choose the insert grade and chipbreaker to match the specific casting type, depth of cut and machine stiffness; smoother cast irons with lighter interruptions permit more aggressive parameters, while heavily interrupted or less rigid setups benefit from the tougher T5125 grade. Corner radius and included angle affect both strength and finish—1.2 mm corner radius offers a robust contact edge while maintaining acceptable surface quality. For any uncertainty regarding holder compatibility or process parameters, consulting technical documentation or a tooling specialist ensures the correct combination of holder, shim and screw for the application. Contact Metav Werkzeuge for technical selection assistance and prompt supply of Tungaloy CNMA160612 turning inserts Technical Data Article number: 6850162 Manufacturer SKU: TUN6850162 SKU: 6850162-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide (Hartmetall) Facts Plate size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Special features Rhombic plate form (CNMA) Cylindrical hole CVD-coated carbide, grade T5125 Designed for turning; suitable for cast iron and interrupted cuts ISO-compatible indexable insert FAQ What materials is this insert best suited for? The CNMA160612 T5125 turning insert is optimised for cast iron applications and performs well under interrupted cutting conditions thanks to the tougher T5125 grade. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the CNMA 160612 format fits standard ISO-compatible external holders and boring bars designed for CNMA plates. What does the T5125 designation indicate? T5125 denotes a CVD-coated carbide grade formulated for increased toughness, making the insert suitable for less stable conditions and intermittent machining of cast iron. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and reduces the likelihood of chipping, improving durability in interrupted cuts while still providing acceptable surface finish. Is this insert suitable for internal turning? Yes, the ISO CNMA geometry and the 6.35 mm thickness allow use in appropriate boring bars for internal turning, provided the holder supports CNMA inserts. How to identify the insert for reordering? Order using the designation CNMA160612 T5125 and the manufacturer article number 6850162 or SKU 6850162-Tungaloy to ensure the correct Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 160612 T515 Wendeplatten - Tungaloy
Take advantage of the combination of an economical T515 grade and robust 80° rhombic geometry for consistent, productive cast iron turning; compatibility with ISO holders ensures straightforward replacement and integration. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored application advice. CNMA 160612 T515 – ISO turning insert for turning, CVD-coated carbide (Tungaloy) The CNMA160612 T515 is an ISO rhombic turning insert engineered for the economical machining of cast iron, featuring a CVD-coated carbide grade and an 80° cutting geometry for reliable performance. ISO rhombic insert CNMA 160612 T515 CVD-coated carbide for cast iron machining 80° geometry with 1.2 mm corner radius Cylindrical-hole design, 6.35 mm thickness Economical cast iron machining with CVD-coated carbide The combination of CVD-coated surface technology and carbide substrate in grade T515 is designed to deliver stable chip formation and extended tool life when turning cast iron. The chemical vapour deposition layer improves wear resistance and reduces edge breakdown, which results in fewer tool changes and lower overall machining costs. For operations where interrupted cuts, varying stability and moderate to high cutting speeds occur, this insert offers a balanced performance that supports continuous production with predictable tool-life behaviour. Geometry and clamping that secure repeatable results The rhombic 80° geometry with a 1.2 mm corner radius provides a secure cutting edge for external and internal turning, promoting dimensional control and improved surface quality on cast iron components. The insert is supplied with a cylindrical hole to match standard ISO clamping systems and has a 6.35 mm thickness, which contributes to mechanical rigidity in the toolholder. Compatibility with the holder is determined by form, clearance angle (0° relief), tolerance class, clamping method, size and thickness, ensuring interchangeability within ISO systems and straightforward tool set-up in automated or manual turning centres. System benefits that raise workshop productivity This insert is part of an ISO insert system that includes a matching external holder or boring bar, a backing/clamping kit and replacement screws; these system elements together reduce downtime during tool changes and simplify inventory management. The straightforward specification—ISO designation, T515 grade, rhombic form—makes it easier to select a matching holder and to maintain consistent cutting parameters across batches. For procurement and process planning this results in measurable gains: fewer set-ups, consistent component quality and economical use of carbide grades for high-volume cast iron turning. For application support or to confirm holder compatibility for Tungaloy inserts, contact Metav Werkzeuge for expert advice and immediate availability information. Technical data Article number: 6745262 Manufacturer SKU: TUN6745262 SKU: 6745262-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMA160612 T515 Tungaloy-Wendeplatte Core dimensions Insert size: 16 mm Thickness: 6.35 mm Cutting edge angle: 80° Corner radius: 1.2 mm Relief angle: 0° Materials & features Material: Carbide (cemented carbide) Coating: CVD Grade: T515 Hole style: cylindrical hole Geometry: rhombic insert Application: Turning; suited for cast iron machining Chipbreaker: none FAQ Which materials is this insert suitable for? The CNMA160612 in grade T515 is optimised for the economical machining of cast iron; the CVD-coated carbide substrate supports stable chip formation in such applications. How does the T515 grade influence cutting performance? T515 combines a wear-resistant CVD-coated surface with a carbide base to provide economic, repeatable performance—especially where cast iron is processed with variable stability and moderate to high cutting speeds. What determines holder compatibility for this insert? Compatibility depends on insert form, relief angle (0°), tolerance class, clamping type, size (16 mm) and thickness (6.35 mm); these parameters define proper matching with ISO toolholders for secure clamping. Is there a chipbreaker on this insert? This rhombic insert is supplied without a chipbreaker, allowing selection of cutting parameters and downstream chip control appropriate to the machining set-up. What are the key mounting dimensions and identification numbers? Key dimensions: 16 mm size, 6.35 mm thickness, 80° geometry, 1.2 mm corner radius and cylindrical hole; identification: Article number 6745262, Manufacturer SKU TUN6745262. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 160616 T515 Wendeplatten - Tungaloy
Take advantage of the combination of a proven CVD-coated carbide T515 grade and the ISO CNMA form for efficient, reliable cast iron turning; compatibility with standard CNMA holders reduces changeover time and improves process stability. Order the original inserts via Metav Werkzeuge or ask the consultants for holder compatibility. CNMA 160616 T515 Turning insert — Tungaloy CNMA160616 T515 is an ISO rhombic turning insert designed for economic machining of cast iron in ISO CNMA systems CNMA 160616 ISO designation CVD-coated T515 carbide grade Designed for cast iron turning Rhombic form with 80° included angle Consistent performance in cast iron turning The CNMA160616 design combines a CVD-coated carbide substrate with the T515 grade to provide wear resistance and stable edge behaviour during continuous cutting of cast iron. The CVD coating (chemical vapour deposition) forms a hard outer layer that improves abrasion resistance and extends effective tool life, which translates into fewer insert changes and higher productive uptime. For practical use this means consistent surface finish and predictable tool-change intervals in serial turning operations. Secure clamping and ISO compatibility for reliable production Compatibility is determined by form, clearance angle 0°, tolerance class, fastening, size and thickness; the rhombic geometry with an 80° included angle and a cylindrical central hole ensures secure seating in standard CNMA-compatible toolholders. Secure clamping reduces chatter and vibration, improving both tool life and dimensional consistency. The indexable insert format simplifies tool replenishment and reduces setup-related downtime in a production environment. Practical dimensions and machining benefits for workshop efficiency With a nominal size of 16 mm, a thickness of 6.35 mm and a corner radius of 1.6 mm, this insert balances edge strength and cutting performance: the 1.6 mm radius increases corner robustness for medium-heavy cuts while still allowing acceptable surface quality. The absence of an integral chipbreaker means this insert is best applied where chip evacuation is uncritical or where external chip control measures are in place; selecting an appropriate holder and cutting parameters optimises chip flow. For tailored recommendations on speeds and feeds for specific cast iron grades, Metav Werkzeuge provides technical guidance. Contact Metav Werkzeuge today to request genuine Tungaloy CNMA 160616 T515 inserts and professional advice on holder compatibility and cutting data for cast iron turning. Technical Data Article number: 6744795 SKU: 6744795-Tungaloy Manufacturer SKU: TUN6744795 Model series: ISO turning inserts Designation: CNMA160616 Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 1.6 mm Thickness: 6.35 mm Plate size: 16 mm Included angle: 80° Clearance angle: 0° Designs / Special features Rhombic plate Cylindrical hole for secure location CVD-coated carbide (T515) No chipbreaker For turning (Drehen) ISO CNMA compatibility FAQ What materials is this insert suited for? The CNMA160616 T515 insert is engineered primarily for machining cast iron; the T515 CVD-coated carbide grade offers abrasion resistance suitable for a broad range of grey and ductile cast irons. How does the 1.6 mm corner radius affect cutting? A 1.6 mm corner radius provides enhanced corner strength for medium to heavy cutting, reducing the risk of edge chipping and supporting stable tool life under higher feed rates. Is a chipbreaker required with this insert? This insert is supplied without a chipbreaker; pairing the insert with a compatible holder and optimised cutting parameters is recommended to control chip formation and evacuation. Which holders are compatible with this insert? Compatibility depends on holder form, tolerance class, fastening method, size and thickness; use holders specified for CNMA inserts with an 80° included angle and matching seat geometry for secure clamping. What benefits does the CVD coating provide? The CVD coating improves surface hardness and wear resistance, leading to longer edge life and consistent cutting performance, especially in abrasive cast iron applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 190612 T5115 Wendeplatten - Tungaloy
Benefit from a balanced combination of edge stability and wear resistance provided by the CVD-coated T5115 grade for productive cast iron turning; the robust rhombic geometry and secure cylindrical hole ensure consistent mounting and repeatable results. Order the CNMA190612 insert directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. CNMA 190612 T5115 Turning Insert (CNMA) – 80° Rhombic, CVD Carbide, Tungaloy CNMA 190612 T5115 is a turning insert designed for external and internal turning, offering a universal carbide grade optimised for cast iron machining CVD-coated carbide grade T5115 Universal grade for cast iron turning Rhombic 80° geometry, 1.2 mm nose radius Cylindrical hole for secure clamping Consistent wear resistance for demanding cast iron operations The CVD-coated T5115 carbide grade combines surface hardness with a stable cutting edge to extend tool life during cast iron machining. This universal grade was developed to provide a compromise between wear resistance and edge stability, which reduces the frequency of index changes in continuous production. As an indexable insert, the design focuses on delivering reproducible cutting results and minimised downtime through predictable wear behaviour and a coating that helps resist built-up edge under typical turning conditions. Geometry and mounting that support process reliability The 80° included angle and rhombic shape deliver a versatile cutting geometry suitable for a wide range of turning tasks, while the 1.2 mm nose radius supports both profile accuracy and strength at the cutting edge. Plate dimensions such as 6.35 mm thickness and 19 mm size contribute to stiffness in the assembly. The cylindrical hole provides a secure location for the fixing screw and helps maintain repeatable seating in compatible holders. Holder compatibility is determined by form, clearance angle, tolerance class, fixing, size and thickness, so the matching of insert and clamping system is essential for achieving the advertised performance. Application guidance and machining advantages Engineered primarily for turning of cast iron (Gusseisen), the insert is supplied without a chipbreaker, which permits flexible selection of cutting parameters and external chip-control measures depending on the machining task. Inserting the component into a correctly specified external holder or toolpost bar ensures stable cutting, while coolant strategy and feed selection influence surface finish and tool life. The combination of a robust carbide substrate and the CVD layer aims to deliver productive machining with reproducible surface quality, especially in medium to heavy interrupted cuts or continuous finishing passes. Contact Metav Werkzeuge for detailed application advice on the Tungaloy CNMA190612 T5115 turning insert and to confirm holder compatibility or stock availability. Technical data Article number: 6850173 SKU: 6850173-Tungaloy Manufacturer SKU: TUN6850173 Product name: CNMA190612 T5115 Tungaloy indexable insert Core data Included angle: 80° Clearance angle: 0° Nose radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Features & applications Material: carbide Coating: CVD (T5115) Shape: rhombic Hole style: cylindrical hole Chipbreaker: none Application: turning (external and internal) FAQ Is the insert suitable for cast iron turning? Yes. The CNMA190612 T5115 insert uses a CVD-coated carbide grade formulated as a universal solution for cast iron, providing a balance of wear resistance and edge stability. How is the CNMA190612 clamped in the holder? The insert features a cylindrical hole for screw fastening; correct clamping requires a compatible holder that matches the insert form, clearance angle, tolerance class, size and thickness. What does the T5115 designation indicate? T5115 denotes the CVD-coated carbide grade tuned for general cast iron applications, emphasising wear resistance and reliable edge performance for turning tasks. Can this insert be used for internal turning? Yes. The geometric design and 80° rhombic shape make the insert suitable for both external and internal turning when mounted in an appropriate internal boring holder. Does the insert include a chipbreaker? No. The CNMA190612 is supplied without a chipbreaker, which allows process engineers to select cutting conditions and chip-control strategies suited to the specific operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 190612 T5125 Wendeplatten - Tungaloy
Combining a CVD-coated carbide T5125 grade with the CNMA190612 geometry and an 80° included angle yields a robust solution for interrupted turning of cast iron; the rhombic form and 1.2 mm corner radius support consistent edge life and reliable chip control under less stable conditions. Order the insert directly via Metav Werkzeuge or request consultation for application-specific advice. CNMA 190612 T5125 Turning insert (ISO) by Tungaloy — rhombic 80° geometry, CVD-coated CNMA190612 T5125 Tungaloy insert designed for ISO-standard turning applications, offering a tougher CVD-coated carbide for interrupted cuts and less stable setups CVD-coated carbide grade T5125 for toughness ISO CNMA190612 rhombic insert, 80° included angle 1.2 mm corner radius for robust edge strength Cylindrical-hole fixing; 6.35 mm plate thickness Consistent performance for interrupted turning The CVD-coated carbide composition of this indexable insert is formulated as grade T5125, which gives a tougher cutting edge suitable for cast iron and operations with interrupted cuts. The rhombic geometry with an 80° included angle provides a favourable balance between strength and accessibility, reducing the risk of edge chipping when machining unstable setups. In practice, this means a steadier cycle time and fewer unplanned tool changes, supporting higher uptime in serial production. Secure interface and simple integration with holders Compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic insert is supplied with a cylindrical hole to enable positive clamping in standard ISO CNMA pockets. The 6.35 mm plate thickness and standard sizing simplify selection of a matching outer holder or boring bar, while shims and clamping sets provide the correct seating and repeatability. Where interrupted turning is frequent, selecting the corresponding holder and clamping kit ensures stable cutting conditions and repeatable part quality. Material suitability and process advantages This grade is optimised for cast iron applications and less stable cutting conditions: the tougher carbide substrate resists edge fracture and tolerates shock loads better than more wear-focused grades. With a 1.2 mm corner radius, the cutting edge delivers improved load distribution and enhanced edge life on roughing passes, while the absence of an integrated chipbreaker makes the insert suitable for applications where manual chip control or specific coolant strategies are used. Overall, the combination of CVD coating and geometry supports predictable tool life and consistent surface finish, contributing to efficient material removal and lower overall machining costs. For tailored recommendations on Tungaloy CVD-coated inserts and application matching, contact Metav Werkzeuge for fast technical advice and supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6850174 Manufacturer SKU: TUN6850174 Model series: ISO turning inserts Material: Carbide Label: CNMA190612 T5125 Tungaloy-Wendeplatte Core specifications Insert designation: CNMA190612 Insert size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Design & features Grade/coating: T5125, CVD-coated Shape: Rhombic Hole: With cylindrical hole Chipbreaker: None Application: Turning; suitable for interrupted cuts and cast iron Typical system: ISO insert + matching outer holder/boring bar + shim/clamping set + spare screws FAQ What materials is this insert best suited for? The CNMA190612 T5125 Tungaloy insert is optimised for cast iron machining and performs reliably in interrupted cutting where a tougher grade is required. Can this insert be used in standard CNMA holders? Yes — compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the rhombic shape and cylindrical hole of this insert suit standard ISO CNMA pockets when the correct clamping set and shim are used. Why choose grade T5125 for this geometry? Grade T5125 combines a tougher substrate with a CVD coating, reducing the risk of edge fracture during interrupted cuts and in less stable clamping conditions, which extends productive tool life. Is there an integrated chipbreaker on this insert? This variant is supplied without a chipbreaker, so chip control relies on process parameters, toolpath strategy and coolant application rather than an integral chipbreaker geometry. What is the manufacturer article number and SKU for ordering? Manufacturer article number 6850174, available under SKU TUN6850174 for the CNMA190612 T5125 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 190612 T515 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and ISO conformity for reliable shop-floor productivity; the 80° rhombic geometry with a 1.2 mm corner radius ensures robust edge strength for cast iron turning. Order the CNMA190612 T515 insert directly via Metav Werkzeuge or consult our technical team for application advice. CNMA190612 T515 turning insert by Tungaloy — CVD-coated carbide, 80° rhombic A CNMA190612 T515 turning insert designed for economical turning of cast iron in ISO-standard tool systems CVD-coated carbide for extended tool life ISO rhombic CNMA form, 80° cutting angle 1.2 mm corner radius for robust finishes Designed for economical cast iron turning Proven performance for productive turning The CVD-coated grade T515 combines wear-resistant layers with a tough carbide substrate to deliver consistent edge life when machining grey and nodular cast iron. The coating reduces flank wear and maintains the cutting geometry over longer runs, which improves process stability and lowers tool-cost per component. For establishments aiming to raise throughput, the result is fewer indexings and predictable tool-change intervals, supporting continuous production with measurable efficiency gains. System compatibility and secure clamping Built to the ISO CNMA family, this rhombic insert fits common 80° turning holders; compatibility is governed by form, relief angle and nominal size. The plate thickness of 6.35 mm and the designated with hole (cylindrical hole) make mechanical locating and clamping straightforward in standard holders and boring bars. The nominal size 19 mm matches ISO sizing conventions, which simplifies tooling procurement and reduces the need for adapter kits when integrating the insert into existing tool systems. Application guidance and cutting behaviour With a 1.2 mm corner radius, the geometry balances edge strength and surface finish: larger radii support interrupted cuts and roughing passes, while still permitting a controlled finish where stability allows. The grade is optimised specifically for cast iron turning; absence of an integrated chipbreaker recommends pairing the insert with a holder or cutting strategy adapted to chip control, depending on workpiece form and stability. Selecting the correct cutting data and clamping setup will exploit the CVD coating’s thermal and abrasive resistance for best results. Handling, stock and selection tips The rhombic plate shape and 80° cutting angle offer versatility for both external and internal turning tasks, reducing the number of plate geometries needed in a tooling bin. As the insert is supplied to ISO dimensions, replacement and stock rotation are simplified. For interrupted cuts or unstable setups, choose a higher-stability holder and consider smaller depth-of-cut increments to protect the cutting edge. For further specification matching or material-specific recommendations, Metav Werkzeuge provides detailed technical support and parts availability. Contact Metav Werkzeuge for tailored application advice on the Tungaloy CNMA190612 T515 insert and to confirm current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6747810 Manufacturer SKU: TUN6747810 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 1.2 mm Thickness: 6.35 mm Size: 19 mm Cutting angle: 80° Clearance angle: 0° Special features Rhombic plate form (CNMA) CVD-coated grade T515 With cylindrical hole for mechanical locating Without chipbreaker Intended application: turning Optimised for cast iron machining FAQ What materials is this insert best suited for? The CNMA190612 T515 insert is optimised for cast iron turning; the CVD-coated T515 grade provides abrasion and thermal resistance suited to graphite-containing materials. Will the plate fit existing ISO CNMA holders? Yes, the CNMA190612 conforms to ISO CNMA dimensions and works with holders that accept 19 mm CNMA plates with a 6.35 mm thickness and cylindrical locating hole. How does the 1.2 mm corner radius affect machining? A 1.2 mm radius increases edge strength for interrupted cuts and roughing, improving stability and reducing premature chipping compared with finer radii. Is a chipbreaker included with this insert? This grade is supplied without a chipbreaker; chip control should be achieved via holder geometry, cutting parameters or an appropriate clamping strategy. What does the "with hole" designation mean for mounting? The plate’s cylindrical hole provides positive mechanical location and secure clamping with standard CNMA clamping sets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 190616 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T5125, an 80° rhombic geometry and a 1.6 mm corner radius for reliable turning in interrupted or less stable conditions; these characteristics support stable chip formation and extended tool life. Order the CNMA190616 T5125 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMA190616 T5125 — ISO turning insert CNMA 190616 T5125 for turning, Tungaloy A CNMA190616 T5125 indexable insert engineered for external and internal turning, especially where interrupted cuts or unstable set-ups demand a tougher, CVD-coated carbide grade. CVD-coated carbide grade T5125 Optimised for interrupted cuts 80° rhombic shape with 1.6 mm radius Precision and reliability for demanding turning operations The insert’s CVD-coated surface and T5125 grade deliver a balance of toughness and wear resistance that benefits components produced from brittle or variable materials. The substrate of carbide provides the hardness needed for sustained cutting, while the coating reduces flank wear and increases edge life. In practice, this results in fewer tool changes and steadier component quality when machining cast components or mixed-material batches. The geometry helps convert vibrations into controlled chip formation, so surface finish and process repeatability improve under interrupted cutting cycles. Seamless integration into ISO tool systems for efficient setup Designed to ISO dimensions, the plate fits holders determined by form, clearance and dimensional tolerances, reducing set-up time and inventory complexity. The 80° rhombic form with a 0° clearance angle and the standard size of 19 mm × 6.35 mm ensure compatibility with common external holders and boring bars. A cylindrical hole secures the insert reliably in the pocket and simplifies indexation. The net effect for production: faster changeovers, predictable clamping accuracy and lower risk of incorrect mounting. Robust choice where interrupted cuts or instability occur The tougher CVD-coated grade is specified for machining cast iron under interrupted cutting or less stable conditions; this means the insert resists chipping and maintains a usable edge longer than standard grades. With a 1.6 mm corner radius, the cutting edge offers enhanced strength, which reduces the likelihood of edge fracture and supports higher feed rates when permissible. The lack of a chipbreaker on this plate calls for compatible cutting strategies or dedicated chip management, but it also leaves flexibility for customised chip control via cutting parameters or holder-integrated features. For procurement or application advice on Tungaloy CVD-coated inserts such as the CNMA190616 T5125, contact Metav Werkzeuge for expert guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850180 Manufacturer SKU: TUN6850180 Model series: ISO turning inserts Material: carbide Coating/grade: T5125 (CVD-coated) Core specifications Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Cutting angle: 80° Special features Shape: rhombic With cylindrical hole Chipbreaker: none Application: turning (external and internal) Suited for cast iron and interrupted cuts ISO-normed indexable insert FAQ What materials is this insert suitable for? The CNMA190616 T5125 Tungaloy turning insert (SKU TUN6850180) is formulated for machining cast iron and similar materials where interrupted cuts or unstable conditions occur; its CVD-coated carbide grade increases resistance to chipping. Which holder characteristics ensure compatibility? Compatibility requires a holder matching the CNMA form, the 19 mm size and 6.35 mm thickness, the rhombic profile and the 0° clearance; correct fastening, tolerance class and pocket geometry ensure secure clamping of the insert. What does the T5125 designation indicate? T5125 denotes a CVD-coated carbide grade optimised for toughness; the coating improves wear resistance while the substrate supports impact strength, making it suitable for interrupted machining. Is there a chipbreaker on this insert? This plate is supplied without a chipbreaker; machining strategies should account for chip control via cutting parameters or use of toolholders that assist chip evacuation. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge robustness, reduces risk of fracture under interrupted loads and can permit higher feed rates, while slightly influencing achievable fine-profile machining radius. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMA 190616 T515 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T515 and a robust 1.6 mm corner radius for economical, reliable cast-iron turning; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. CNMA 190616 T515 — ISO turning insert (CNMA) for cast iron by Tungaloy The CNMA 190616 T515 is an ISO-format rhombic indexable insert designed for efficient external and internal turning of cast iron, offering a strong cutting edge and good chip control. CVD-coated carbide grade T515 ISO CNMA190616 rhombic 80° form 1.6 mm corner radius for robust edge 6.35 mm thickness with cylindrical hole Efficient cast-iron machining with CVD-coated carbide The CVD-coated carbide grade T515 is optimised for the economical machining of cast iron, combining wear resistance with consistent cutting performance. The CVD layer reduces flank wear under continuous cutting conditions, which translates into longer intervals between indexings and fewer tool changes. Because the cutting material is engineered for cast-iron properties, stable chip formation and predictable surface integrity are achieved, improving process reliability and lowering overall machining costs. Designed for secure clamping and ISO compatibility Compatibility with toolholders is determined by the insert’s form, rake angle, tolerance class, clamping and dimensions — all defined by the ISO format used for this series. The rhombic 80° geometry provides a large effective cutting edge and flexible approach angles, while the cylindrical hole and standard tolerance allow repeatable mounting in compatible CNMA holders. This means the insert can be mounted and secured with established holder systems, ensuring repeatable positioning and minimal set-up time. Practical guidance for turning applications The insert is intended for both external and internal turning operations; the absence of an integrated chipbreaker makes it suitable where customised chip control strategies are preferred or where rigid setups enable smooth swarf evacuation. Selection of a matching chipbreaker and the correct grade should be based on the workpiece stability, cutting interruptions and the desired cutting speed. When used under recommended conditions, the insert supports steady cutting and is particularly effective for continuous finishing passes on cast-iron components. Productivity gains and process safety in daily use By combining a robust 1.6 mm corner radius with a 6.35 mm plate thickness, the design increases edge strength and reduces the risk of premature chipping in heavier cuts. The ISO CNMA geometry offers versatile seating for varying depths of cut and feed rates, so cycle times can be optimised without compromising surface quality. For production environments seeking consistent results, the insert provides a sound balance between productivity and tool life, while compatibility with standard holders simplifies inventory and tool management. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and availability of the CNMA 190616 T515 insert. Technical data Article number: 6747811 SKU: 6747811-Tungaloy Manufacturer SKU: TUN6747811 Facts ISO designation: CNMA190616 Corner radius: 1.6 mm Plate size: 19 mm Plate thickness: 6.35 mm Insert angle: 80° Rake/free angle: 0° Hole style: cylindrical hole Special features Material: cemented carbide Coating: CVD-coated (grade T515) Geometry: rhombic CNMA, ISO-format Designed for: turning (external and internal) Chipbreaker: without integrated chipbreaker Compatibility: determined by form, rake angle, tolerance class, clamping, size and thickness FAQ Which materials is this insert best suited for? The CNMA 190616 T515 insert (SKU 6747811-Tungaloy) is principally intended for machining cast iron, with the CVD-coated carbide grade T515 optimised for that material group. Can the insert be used for internal turning as well as external turning? Yes, the CNMA geometry and the ISO CNMA190616 format are suitable for both external and internal turning operations when used with compatible holders. Is there an integrated chipbreaker on this insert? This particular insert is supplied without an integrated chipbreaker, enabling bespoke chip control through the choice of holder, cutting parameters or secondary chip-control devices. What are the benefits of the 1.6 mm corner radius? A 1.6 mm corner radius provides a robust cutting edge that resists chipping under heavier depths of cut and contributes to consistent surface finish and predictable tool life. How is holder compatibility ensured for ISO turning inserts? Compatibility is achieved via standardised dimensions and tolerance classes; the insert’s form, free angle, clamping provisions, size and thickness must match the chosen ISO-format holder for reliable mounting and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090304 AH6225 Wendeplatten - Tungaloy
Take advantage of a proven ISO geometry combined with a PVD-coated AH6225 grade to maintain production stability and surface quality when machining stainless steels; the sharp yet robust cutting edge and double-sided chipbreaker reduce changeovers and help sustain throughput — order the insert directly via Metav Werkzeuge or consult its specialists for application support. CNMG090304 AH6225 indexable insert for turning (Tungaloy) The CNMG090304 AH6225 is an ISO rhombic turning insert designed for external and internal turning of stainless steels, offering a sharp yet stable cutting edge for medium machining and variable conditions ISO CNMG090304 geometry, 80° included angle PVD-coated AH6225 carbide grade Optimised for stainless steel machining Double-sided chipbreaker, rhombic insert Reliable geometry for consistent chip control and repeatable results The ISO CNMG090304 geometry combines an 80° included angle with a rhombic outline and a 0° clearance to give rigid seat and reliable cutting orientation. This layout enhances tool stability during lateral and axial cutting, which translates into reduced vibration and more consistent surface finishes. The double-sided chipbreaker supports controlled chip formation across a range of feeds, lowering the frequency of manual interventions and contributing to uninterrupted production cycles. Such geometry is particularly beneficial in mixed-batch environments where repeatable results are essential. Advanced grade and coating for stainless steel performance The insert’s AH6225 grade is a PVD-coated carbide designed as a universal solution for stainless steel applications, balancing a sharp cutting edge with sufficient chipping resistance. The PVD layer increases wear resistance and reduces the tendency for built-up edge formation, which often jeopardises surface integrity when machining work-hardenable alloys. As a result, operators obtain steadier tool life and a better-quality component finish under medium cutting conditions, while tool change intervals are stabilised — a tangible contribution to productivity and cost-efficiency. Practical compatibility and handling advantages for workshop workflow With a 3.18 mm plate thickness, 0.4 mm corner radius and a rhombic 09 size, the insert fits standard ISO holders when matched by form, clearance, tolerance class and fastening method. The cylindrical hole enhances secure clamping and positional repeatability, while the double-sided design effectively doubles available cutting edges per seat. For procurement and inventory planning, the manufacturer SKU TUN6903154 and article number 6903154 identify the genuine component; technical support and selection guidance are available through Metav Werkzeuge to ensure the chosen chipbreaker and grade match the specific material and stability conditions of the operation. Contact Metav Werkzeuge for original Tungaloy CNMG090304 AH6225 inserts and tailored selection advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903154 SKU: 6903154-Tungaloy Manufacturer SKU: TUN6903154 Material: cemented carbide Grade / coating: AH6225 (PVD-coated) Model series: ISO turning indexable inserts Application: turning Core data Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 09 Included angle: 80° Clearance angle: 0° Special features ISO CNMG090304 geometry Rhombic insert shape Cylindrical hole for clamping Double-sided chipbreaker Designed for stainless steel machining Compatible with ISO holders and bores FAQ What materials is this insert suited for? The CNMG090304 AH6225 insert is optimised for machining stainless steel; the AH6225 PVD-coated carbide grade reduces built-up edge and improves wear resistance during medium cutting. What are the key geometric specifications to check for holder compatibility? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; the CNMG090304 uses a rhombic 09 size, 3.18 mm thickness and 0° clearance which should be matched to ISO holders. How does the AH6225 grade affect tool life and surface finish? The AH6225 grade provides a sharp yet stable cutting edge with a PVD coating that enhances wear resistance and lowers built-up edge, resulting in steadier tool life and improved surface quality under typical stainless steel conditions. Is this insert reversible and how does that impact cost-efficiency? The double-sided chipbreaker design allows the insert to be indexed for additional cutting edges, effectively increasing usable life per insert and reducing tooling cost per component. Which identifiers should be used when ordering the original part? Order using the manufacturer article number 6903154 or the SKU 6903154-Tungaloy to ensure the genuine Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090304 NS9530 Wendeplatten - Tungaloy
Conflicting product data detected: the specification lists both "Hartmetall" and an "uncoated cermet" cutting grade (NS9530), which are incompatible. This discrepancy suggests a potential error in the source documentation or a misunderstanding in the classification of the materials, as "Hartmetall" typically refers to cemented carbide, while "uncoated cermet" represents a distinct material category with different properties and applications. Please verify and correct the source data for the material/cutting-grade information to ensure accuracy and consistency in the product description, as such errors could lead to confusion or misrepresentation of the product's intended use and performance characteristics.
CNMG 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 uncoated cermet finishing grade and the precise CNMG090304 geometry for consistent high-quality turning results; compatibility with ISO holders is ensured by matching form, clearance and thickness. Order via Metav Werkzeuge or consult the team for holder matching and application advice. CNMG 090304 NS9530 Tungaloy turning insert — uncoated cermet finishing grade, rhombic 09 form CNMG090304 NS9530 Tungaloy is a precision finishing insert for external and internal turning of steel, designed for continuous cuts and small depths of cut Finishing cermet grade NS9530 Sharp edge for high surface finish Rhombic 09 form, 80° included angle Double-sided chipbreaker, cylindrical hole Superior finishing performance for steel turning The uncoated cermet grade NS9530 is engineered for finishing operations where a sharp cutting edge and low cutting forces deliver excellent surface quality. As a finishing sort, this grade excels on continuous cuts and small depths of cut, reducing the need for secondary finishing. The substrate and edge geometry combine to produce a consistent contact between insert and workpiece, which helps to achieve repeatable surface integrity on steels while keeping process forces modest. Reliable fit within ISO tool systems Being an ISO-standard rhombic insert, compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness. The system comprises the ISO insert together with a suitable external holder or boring bar, plus the correct clamp set and replacement screws. Specifying the rhombic 09 form and checking the 0° clearance specification ensures the insert seats correctly and maintains clamping stability, reducing vibration and improving tool life in well-set machines. Efficient chip control and process economy The double-sided chipbreaker design improves chip control during finishing, promoting steady evacuation in continuous turning conditions. The uncoated cermet cutting edge minimises built-up edge formation and keeps cutting forces low, which in turn can reduce cycle time and the need for rework. This rational approach to tool selection supports a cost-effective workflow by lowering machining variability and preserving surface quality directly from the cut. Practical selection and installation guidance Choose the CNMG090304 variant that matches machine rigidity and component clamping: the rhombic 09 shape, 3.18 mm thickness and 0° clearance suit holders designed for precise finishing cuts, while the cylindrical hole ensures secure fastening. For stable results, pair the insert with a holder whose form and tolerance class correspond to the insert geometry; select the chipbreaker and grade appropriate to the material and the depth of cut. The article designation and SKU assist in ordering and matching: CNMG090304 NS9530, SKU 6998136-Tungaloy. Contact Metav Werkzeuge for tailored holder matching and to place enquiries for the CNMG090304 NS9530 Tungaloy insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998136 Manufacturer SKU: TUN6998136 SKU: 6998136-Tungaloy Model series: ISO turning inserts Designation: CNMG090304 NS9530 Tungaloy Core dimensions Size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 80° Clearance angle: 0° Features and materials Material: carbide Cutting material: uncoated cermet (NS9530) Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning (external and internal) Free angle: 0° FAQ What materials is this insert designed for? The CNMG090304 NS9530 insert is a finishing grade optimised for steel; the NS9530 uncoated cermet provides a sharp edge and low cutting forces suited to continuous finishing cuts on steel. How is holder compatibility determined for this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; for the CNMG090304 check that the holder accepts a rhombic 09 insert with 3.18 mm thickness and the specified hole style. Can this insert be used for internal turning operations? Yes, the CNMG090304 NS9530 Tungaloy turning insert is suitable for both external and internal turning where finishing cuts and small depths of cut are employed. What chip control can be expected from this geometry? The double-sided chipbreaker on the CNMG090304 helps to control chips in continuous turning, supporting stable evacuation and consistent surface quality. Is the insert coated? This insert uses an uncoated cermet cutting material (NS9530), chosen to maintain a sharp edge and low cutting forces for finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090304 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T6215 and ISO CNMG geometry for reliable stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. CNMG 090304 T6215 indexable insert for turning — Tungaloy, CVD-coated carbide CNMG090304 T6215 is an ISO‑standard indexable insert for external and internal turning, engineered for machining stainless steel under stable to slightly interrupted cutting conditions. CNMG geometry ISO 090304 rhombic shape CVD-coated carbide grade T6215 Double-sided with central cylindrical hole 0° rake angle and 0.4 mm corner radius Consistent wear resistance for demanding stainless‑steel operations The CVD‑coated carbide grade T6215 delivers a balanced mix of wear resistance and edge strength that suits continuous and lightly interrupted turning of stainless steel. The coating reduces adhesion and flank wear, which leads to more predictable tool life and consistent surface finish. For production environments where repeatability matters, the coated substrate helps maintain process stability and reduces the frequency of tool changes, contributing to improved uptime and lower overall machining costs. Geometry and chip control for stable productivity The rhombic CNMG form with a 0.4 mm corner radius and a 0° rake provides a neutral, robust cutting edge that favours stable cutting conditions and controlled chip formation. The insert is double‑sided and equipped with a cylindrical hole for secure clamping in ISO‑compatible holders; this design supports repeatable seating and orientation. Selecting the appropriate chipbreaker and grade according to workpiece material and machining stability ensures efficient chip evacuation and consistent dimensional results with minimal intervention. ISO compatibility and practical handling for workshop integration As part of the ISO turning insert series, the plate size 09 and thickness 3.18 mm match standard holder pockets when form, relief angle, tolerance class, fastening and size are correctly paired. The insert’s CVD‑coated carbide construction and double‑sided layout make it a compact, economical choice for batch production and series work where predictable performance is required. Compatibility is determined by the holder geometry and clamping system; verify seat fit and clearance to ensure optimal engagement and to avoid unexpected stresses on the cutting edge. Contact Metav Werkzeuge for application advice or to request a quotation for the Tungaloy CNMG090304 T6215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903011 Manufacturer SKU: TUN6903011 SKU: 6903011-Tungaloy Designation: CNMG090304 T6215 Tungaloy indexable insert Facts Size: 09 Corner radius: 0.4 mm Thickness: 3.18 mm Included angle: 80° Rake angle: 0° Hole: cylindrical Double-sided: yes Special features Coating: CVD-coated carbide (T6215) Material: carbide Chipbreaker: double-sided Shape: rhombic Application: turning (stable to slightly interrupted cuts) System: ISO turning insert series FAQ Which machining tasks suit this insert best? The CNMG090304 T6215 insert is intended for external and internal turning, especially when machining stainless steel under stable to lightly interrupted conditions where wear resistance and consistent edge life are priorities. How is holder compatibility determined? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the ISO‑standard pocket and clamping system match the CNMG form and the 3.18 mm thickness. What benefits does the T6215 grade provide? The T6215 CVD‑coated carbide grade offers improved wear resistance and adhesion control on stainless‑steel alloys, supporting longer tool life and more consistent surface finishes in turning operations. Is the insert suitable for interrupted cuts? The insert is designed for stable to slightly interrupted machining; choose appropriate machining parameters and a matching chipbreaker when interruptions increase or when the workpiece condition is less stable. What clamping features does the insert have? The insert is double‑sided and supplied with a central cylindrical hole for secure clamping in ISO holders, supporting repeatable seating and orientation during indexation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090304 T9215 Wendeplatten - Tungaloy
Take advantage of CVD‑coated carbide and a 0.4 mm corner radius for reliable medium‑steel turning; the ISO‑standard geometry ensures straightforward replacement and consistent part quality. Order the insert directly via Metav Werkzeuge or consult the technical advisors if further compatibility details are required. CNMG 090304 T9215 ISO turning insert (CNMG 09, 0.4 mm) – Tungaloy The CNMG090304 T9215 is an ISO‑standard rhombic turning insert intended for turning applications, combining a CVD‑coated carbide grade with a 0.4 mm corner radius for productive machining of medium steel. CVD-coated carbide grade T9215 Optimised for medium steel machining 0.4 mm corner radius for versatile profiles ISO CNMG 09 rhombic insert, 80° approach angle Productive medium‑steel turning with controlled wear The insert features a CVD‑coated carbide substrate in grade T9215, a combination that balances wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD (chemical vapour deposition) creates a uniform hard coating that reduces abrasive wear and extends tool life under typical steel cutting conditions. The result is a consistent surface finish and longer intervals between indexings, which supports steady production output and reduces tool change frequency. Compatibility and straightforward mounting for reliable uptime Compatibility with a toolholder is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic CNMG form (size 09) with an included angle of 80° and a 0° clearance specification fits standard CNMG holders when the holder matches the insert seat and clamping arrangement. The insert is supplied with a cylindrical hole, enabling secure fastening; ensure the holder’s pocket and screw pattern correspond to the CNMG090304 profile to guarantee repeatable positioning and mechanical stability. Operational benefits and typical applications With a 0.4 mm corner radius, the plate offers a balance between strength at the cutting edge and the ability to produce detailed contours. The double‑sided chipbreaker geometry supports chip control during external and internal turning, helping to avoid chip entanglement and improving process reliability. Given the cutting material characteristics and the grade’s design, this insert is a first choice for medium steel machining where productivity and consistent tool life are priorities. The indexable design allows cost‑effective edge renewals, and the ISO‑standard sizing simplifies inventory management. For dependable medium‑steel turning select the Tungaloy CNMG090304 T9215 insert; contact Metav Werkzeuge for availability and precise compatibility guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773946 SKU: 6773946-Tungaloy Manufacturer SKU: TUN6773946 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: T9215 (CVD-coated carbide) Facts Plate thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 80° Plate size: 09 Clearance angle: 0° Hole: with hole (cylindrical) Special features Rhombic plate form (CNMG) Double-sided chipbreaker Cylindrical hole for secure fastening Suited for medium steel machining Recommended for continuous to slightly interrupted cuts Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ Which materials is this insert suitable for? The CNMG090304 T9215 insert is optimised for medium steel machining; the CVD‑coated carbide grade provides abrasion resistance and edge stability for typical steel turning applications. Can the insert be used for interrupted cuts? The Tungaloy grade T9215 is suitable for continuous to slightly interrupted cuts; heavily interrupted operations may require a different geometry or tougher grade. How is holder compatibility confirmed? Compatibility depends on the holder’s seat form, clearance angle, tolerance class, fastening method, size and thickness; match the CNMG090304 profile and the 3.18 mm plate thickness to ensure secure clamping. What does the T9215 designation indicate? T9215 denotes a CVD‑coated carbide grade developed for balanced wear resistance and fracture toughness, aimed at productive medium‑steel turning. Which identifiers are useful when ordering? Use the manufacturer article number 6773946 and the SKU 6773946‑Tungaloy when ordering the CNMG090304 T9215 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 0.4 mm corner radius and the rhombic 80° geometry for consistent productivity in medium steel turning; order the CNMG090304 T9215 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG 090304 T9215 — CNMG090304 indexable insert for turning by Tungaloy A CNMG090304 T9215 Tungaloy insert engineered for turning applications in medium steel, offering a CVD-coated carbide grade optimised for productive, continuous to lightly interrupted cuts CNMG 09 format, rhombic 80° geometry CVD-coated carbide grade T9215 for steel Double-sided chipbreaker with cylindrical hole 0.4 mm corner radius and 0° clearance Reliable wear resistance for steady production The insert delivers consistent tool life through its CVD-coated carbide composition and the T9215 grade, selected for mid-range steel machining. This coating enhances oxidation and abrasion resistance, helping to maintain cutting-edge integrity during sustained operations. The rhombic 80° geometry supports robust cutting forces while the 0.4 mm corner radius balances strength and surface finish. Compatibility with standard ISO holders ensures integration into common turning setups without complex adjustments. Predictable cutting behaviour and process security Designed with a double-sided chipbreaker and a cylindrical hole for secure clamping, the component offers repeatable chip control and stable force distribution. The 0° clearance specification and a plate thickness of 3.18 mm contribute to tool stability, reducing vibration during continuous and slightly interrupted cuts. This results in predictable cycle times and fewer unscheduled tool changes, supporting higher throughput and lower per-part costs in serial production. Clear selection logic and easy holder matching Selection and fit are determined by insert form, relief angle, tolerance class, clamping method, size and thickness, so the correct combination with an ISO-compliant holder is straightforward. The ISO-series design simplifies replacement and inventory management across similar turning operations. For mixed batch production, the insert’s balance of wear resistance and fracture toughness reduces setup variation and helps maintain consistent component quality across shifts. Contact Metav Werkzeuge for personalised application support on the Tungaloy CNMG090304 T9215 insert and to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772171 SKU: 6772171-Tungaloy Manufacturer SKU: TUN6772171 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG090304 Facts Geometry angle: 80° Corner radius: 0.4 mm Clearance (relief) angle: 0° Thickness: 3.18 mm Size: 09 Hole: with hole — cylindrical Special features CVD-coated carbide Grade T9215 for medium steel Double-sided chipbreaker Rhombic insert form (CNMG) For continuous to lightly interrupted turning Compatibility depends on holder form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The T9215 grade CVD-coated carbide is specified for medium steel machining; it combines wear resistance with fracture toughness for productive turning. How does the CNMG090304 format affect machining? The CNMG 09 rhombic shape with 80° geometry and a 0.4 mm corner radius provides stable cutting behaviour suitable for external and internal turning operations. Is the insert reversible or single-use? This is a double-sided indexable insert, allowing rotation and reuse of additional cutting edges until all edges reach wear limits. What determines compatibility with a toolholder? Compatibility is defined by insert form, relief (clearance) angle, tolerance class, clamping method, size and thickness; matching these parameters ensures correct fit with ISO holders. What is the manufacturer part number for ordering? The manufacturer article number is 6772171 and the product is listed as CNMG090304 T9215 Tungaloy insert (SKU 6772171-Tungaloy) Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, ISO CNMG090304 geometry and the T9225 universal grade for reliable medium-to-heavy steel turning; robust chip control and reversible design reduce tool changes and support continuous production. Order original inserts via Metav Werkzeuge or consult the specialists for application advice. CNMG 090304 T9225 turning insert by Tungaloy — CVD-coated carbide for medium-to-heavy steel turning CNMG090304 T9225 is an ISO-format turning insert for versatile external and internal turning applications, offering robust performance where interrupted cuts or variable engagement demand higher toughness. CVD-coated carbide for robust steel turning Universal grade T9225 for interrupted cuts ISO CNMG 090304, 80° rhombic geometry 0.4 mm corner radius, double-sided insert Increased uptime through a tough, coated grade The combination of CVD-coated carbide and the T9225 grade delivers a balance of hardness and toughness suited to medium-to-heavy steel machining. The coating improves wear resistance at elevated cutting temperatures, which helps to maintain a consistent cutting edge and prolongs in-process life. Fewer tool changes translate into improved machine availability and lower handling time, supporting steady production cycles and predictable turnaround for batch and single-part manufacturing. Secure mounting and standardised compatibility for fast tool changes Designed in the ISO CNMG format, the insert fits established 80° rhombic holders when dimensions match; compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. The 80° rhombic geometry and a 0.4 mm corner radius provide a robust contact area and a favourable cutting edge for a range of turning tasks. The central cylindrical hole with screw clamping enables firm seating in a matched holder, while the double-sided configuration doubles the effective life per insert and reduces inventory turnover. Predictable chip control and flexible application choices The insert’s double-sided chipbreaker design supports controlled chip formation across various depths of cut and feed rates, improving surface finish and lowering the risk of vibration under unstable conditions. Selection of the appropriate chipbreaker and grade should follow the material, cutting strategy and machine rigidity; for unstable setups, the T9225 universal grade offers additional toughness to ride through light interruptions. The reversible nature of the component makes it a cost-effective choice for job shops and production lines that require quick index changes and consistent part quality. Practical guidance for selection and use Ensure the chosen holder matches the ISO geometry and thickness to maintain clamping reliability and tool life. When replacing inserts, verify the tolerance class and fastening screw condition to avoid micro-movements that affect surface quality. For applications that combine high cutting speeds with interrupted cuts, choose conservative parameters initially and adjust feeds to balance tool life with productivity. If further data is required—material recommendations, preferred chipbreaker options or application examples—the team at Metav Werkzeuge can provide tailored guidance; contact details are available for technical consultation. For robust medium-to-heavy steel turning with original Tungaloy grade T9225, contact Metav Werkzeuge for ordering and application advice Technical data Article number: 6780734 SKU: 6780734-Tungaloy Manufacturer SKU: TUN6780734 Designation: CNMG090304 ISO designation: 090304 Material: carbide Application: turning Shape: rhombic Hole: with hole (cylindrical hole) Clearance angle: 0° Included angle: 80° Thickness: 3.18 mm Corner radius: 0.4 mm Chipbreaker: double-sided Grade/coating: T9225, CVD-coated Dimensions & measurable data Corner radius: 0.4 mm Thickness: 3.18 mm Insert size: 09 Clearance angle: 0° Included angle: 80° Features & suitability CVD-coated carbide grade T9225 For external and internal turning Double-sided, reversible insert Central cylindrical hole for screw clamping Compatible with ISO CNMG holders; check form, tolerance and thickness Robust universal grade for medium-to-heavy steel machining FAQ What materials is this insert suitable for? The CNMG090304 insert in grade T9225 is designed primarily for medium-to-heavy steel machining and performs well under slightly interrupted cuts thanks to the CVD-coated carbide composition. How does the insert mount in a holder? This ISO-format rhombic insert uses a central cylindrical hole and screw clamping; correct holder compatibility depends on matching form, clearance angle, tolerance class, size and thickness for secure seating. Is the insert reversible and what is the benefit? Yes, the double-sided indexable insert offers two usable cutting edges, which effectively doubles service life per insert and reduces replacement frequency for the workshop. Which chipbreaker should be chosen for fine surface finish? For improved surface finish, select a chipbreaker suited to the actual feed and depth of cut; the built-in double-sided chip control of this insert helps maintain consistent chips and surface quality under stable conditions. How to identify the exact product? The item is listed as CNMG090304 in grade T9225 with article number 6780734 and manufacturer SKU TUN6780734, supplied as an original Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090304 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD‑coated carbide T9225 grade and the standard CNMG 090304 geometry for reliable medium‑to‑heavy steel turning; combine wear resistance and toughness for longer tool life and consistent surface finish. Order directly via Metav Werkzeuge or consult our specialists for matching holders and system components. CNMG 090304 T9225 – Turning Indexable Insert (ISO CNMG090304) by Tungaloy A CNMG 090304 T9225 indexable insert engineered for robust turning operations in steel, offering a universal CVD coating and a geometry optimised for interrupted cuts and variable engagement CVD-coated carbide T9225 Universal grade for medium‑to‑heavy steel Rhombic CNMG geometry, 80° approach Double‑sided insert with cylindrical hole Engineered for consistent performance in steel turning The CVD‑coated T9225 grade is a carbide compound designed to balance toughness and wear resistance for demanding turning tasks. As a universal choice for medium‑to‑heavy steel machining, this insert tolerates varying cut conditions and short interruptions without premature failure, which translates to fewer tool changes and improved process stability. The combination of robust substrate and chemical vapour deposition delivers reliable flank and crater wear behaviour, helping maintain part tolerances across series production. Clear compatibility with standard ISO tooling systems Specified to ISO geometry, the CNMG090304 form ensures straightforward integration with common external holders. The rhombic shape and 80° approach angle produce a stable cutting engagement for a broad range of turning operations, while the 0° rake angle supports a neutral cutting action that is easier to control under mixed conditions. The insert’s cylindrical hole and standard thickness enable secure clamping with compatible clamps, shims and screws; the system approach means replacement inserts fit predictable tolerance classes for fast changeovers and reliable assembly. Efficient chip control and extended tool life Chip formation is managed by a double‑sided chipbreaker that promotes stable evacuation and consistent surface quality when paired with the right feed and speed. The CVD treatment enhances abrasive wear resistance and helps preserve the cutting edge during sustained engagement, improving overall tool life and reducing downtime. In practice, choosing the correct chipbreaker style and the universal T9225 grade for steel will result in fewer interruptions and a more predictable productivity profile on batch and continuous turning tasks. Practical application guidance and system overview This insert is recommended for both external and internal turning of steel when variable engagement or slight interruptions require a more tenacious grade. The machining system comprises the indexable insert, a matching external holder or boring bar, and the required backing or clamp set with replacement screws. Selecting feeds and speeds that suit the T9225 grade will optimise edge life and surface finish; for unfamiliar setups, refer to holder compatibility parameters such as form, clearance angle, tolerance class, fixation method, size and thickness to ensure correct assembly. Contact Metav Werkzeuge for tailored advice on selecting Tungaloy CVD‑coated inserts and matching holders to specific turning tasks Technical Data Article number: 6780787 SKU (manufacturer): TUN6780787 SKU: 6780787-Tungaloy Model series: ISO-Drehwendeschneidplatten Item label: CNMG090304 T9225 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Approach angle: 80° Rake angle: 0° Thickness: 3.18 mm Size: 09 Hole style: with cylindrical hole Edge radius: 0.4 mm Special features Material: Carbide Coating: CVD Grade: T9225 Geometry: Rhombic (CNMG) Chipbreaker: double-sided Application: Turning Compatibility: ISO holders and standard clamping systems System components: holder, shim/clamp set, spare screws FAQ What materials is this insert best suited for? The CNMG 090304 T9225 insert is optimised for steel machining; the T9225 grade and CVD coating provide a balance of wear resistance and toughness for medium‑to‑heavy steel turning. Can the insert be used for interrupted cuts? Yes, the T9225 grade and robust carbide substrate are intended for situations with variable engagement or slight interruptions, offering improved resistance to chipping. How many usable cutting edges does this insert provide? As a double‑sided CNMG indexable insert, the CNMG090304 form provides multiple reversible cutting edges; each side can be indexed according to wear and application needs. Which holder types are compatible with this geometry? ISO‑compatible external turning holders and suitable boring bars designed for CNMG inserts will accept this geometry; ensure holder clearance angle and clamping method match the insert’s specifications. Does the insert require specific clamping hardware? The insert is secured via its cylindrical hole and standard clamping sets; use the appropriate backing plate, clamp and replacement screws as per holder manufacturer guidelines to maintain correct tolerance and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH6225, a 0.8 mm corner radius and ISO compatibility for consistent stainless steel turning; the insert delivers a stable, sharp cutting edge with predictable chip control. Order the CNMG090308 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG090308 AH6225 CNMG ISO 090308 rhombic turning insert, PVD-coated carbide — Tungaloy The CNMG090308 AH6225 is an ISO rhombic turning insert designed for reliable external and internal turning of stainless steel under varying machining conditions. ISO rhombic insert CNMG 09 PVD-coated carbide AH6225 for stainless steel 0.8 mm corner radius, 80° lead angle Cylindrical hole, double-sided chipbreaker Reliable edge performance for demanding stainless steel turning The combination of PVD-coated carbide and the AH6225 grade is aimed at providing a balance between sharpness and edge stability when machining stainless steel. The PVD layer increases wear resistance and reduces built-up edge formation, so tool life is extended under medium cutting conditions. Because the grade was developed for fluctuating conditions, surface finish consistency is improved without sacrificing productivity, and the life of the insert is made more predictable for shop planning. Smooth integration with established ISO tool systems Designed to the ISO standard, the rhombic geometry and the standard dimensions ensure straightforward fitting into compatible toolholders. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, which are standardised for this series. The insert is intended to be used with an appropriate external holder or boring bar, a supporting shim/clamp set and replacement screws, allowing rapid changeovers and minimising downtime on the machine. Predictable chip control and dimensional security The double-sided chipbreaker promotes consistent chip formation across a range of feeds, helping to avoid long stringy chips and reducing interruptions. The 0.8 mm corner radius provides a compromise between strength and profile definition: it supports edge robustness for medium cuts while producing a controlled cutting edge radius that benefits surface finish. The rhombic form and 80° lead angle lend stability in both external and internal turning operations, enhancing process reliability in production runs. Practical workshop benefits and handling The insert is manufactured from carbide with a PVD coating and is double-sided, so one insert provides two cutting edges before indexing. The plate thickness of 3.18 mm and the cylindrical hole are designed for secure clamping, reducing the risk of movement under load. Traceable article and manufacturer SKUs support inventory control and reordering, while the standardised format simplifies tool management across machines. For customers seeking a robust, universal solution for stainless steel turning, this insert offers a pragmatic balance of performance and usability. For tailored technical advice or to arrange supply of the CNMG090308 AH6225 by Tungaloy, please contact Metav Werkzeuge via email or phone; our consultants will recommend the best holder and cutting data for the application. Technical Data Article number: 6903155 Manufacturer SKU: TUN6903155 SKU: 6903155-Tungaloy Model series: ISO turning inserts Material: Carbide Grade / coating: AH6225, PVD-coated Application: Turning Core technical data Corner radius: 0.8 mm Plate thickness: 3.18 mm Size: 09 ISO code: 090308 Lead/approach angle: 80° Clearance angle: 0° Special features Rhombic plate format (CNMG) Double-sided chipbreaker Cylindrical hole for secure clamping Universal grade for stainless steels Compatible with standard ISO holders and shims FAQ What materials is this insert suited for? The CNMG090308 AH6225 insert is a PVD-coated carbide grade developed primarily for stainless steel machining and is suitable for medium cutting conditions where a sharp, stable edge is required. Can the insert be used for both external and internal turning? Yes, the rhombic CNMG geometry and an 80° lead angle make the insert appropriate for both external and internal turning applications when used with a suitable holder. How does the chipbreaker affect machining performance? The double-sided chipbreaker on this Tungaloy insert supports controlled chip formation, reducing the risk of long chips and improving process reliability during continuous production. What does the 0.8 mm corner radius mean for my parts? A 0.8 mm corner radius offers a compromise between edge strength and the achievable surface finish: it increases edge robustness for medium cuts while still producing an acceptable profile on the workpiece. Which identifier should be used when reordering this insert? Use the article number 6903155 or the manufacturer SKU TUN6903155 to ensure the correct CNMG090308 AH6225 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 GT720 Wendeplatten - Tungaloy
Take advantage of the combination of high‑quality GT720 cermet, precise CNMG geometry and a robust rhombic form for consistently improved surface finish and tool life; order the insert directly via Metav Werkzeuge or contact the consultants for compatibility advice. CNMG 090308 GT720 indexable turning insert — ISO turning insert for finishing and light turning, Tungaloy The CNMG 090308 GT720 is an ISO‑standard indexable turning insert engineered for finishing to light turning of steel, offering a fine surface finish and controlled, even wear. ISO CNMG 090308 geometry for stability Cermet grade GT720 for superior finish Double‑sided chipbreaker for flexible indexing 0° relief angle for finishing operations Precision finishing and consistent surface quality The GT720 grade is a cermet cutting material optimised for finishing and light turning of steel; it delivers a refined surface finish and improved dimensional accuracy compared with standard grades. The material formulation promotes uniform wear across the cutting edge, which reduces variation between indexed positions and extends productive cutting life. For process planners this translates into fewer part reworks and longer intervals between insert replacements, supporting a more predictable production flow and lower unit costs. Secure clamping and clear holder compatibility The rhombic CNMG geometry with a nominal size 09 and an included angle of 80° provides reliable cutting edge stability when paired with a compatible external holder or boring bar. The insert features a 0° relief and a 0.8 mm corner radius, offers a plate thickness of 3.18 mm, and is supplied with a cylindrical hole for secure fastening. Compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; selecting the correct combination ensures repeatable clamping, minimised vibration and consistent part quality in turning applications. Recommended use and process considerations Designed for external and internal turning, this grade and geometry suit finishing to light roughing of steel where surface quality and dimensional control are priorities. The double‑sided chipbreaker enables two usable cutting edges per index, improving cost efficiency, while the rhombic form allows straightforward indexing and edge rotation. For best results, pair the insert with a stable holder and an appropriate underlay or clamp set; confirm that the chosen chipformer and grade match the workpiece material and process stability to maintain tool life and surface integrity. Choose the Tungaloy GT720 CNMG 090308 via Metav Werkzeuge for improved finishing performance and predictable tool life — contact Metav Werkzeuge for tailored compatibility and ordering guidance. Technical data Article number: 6849134 Manufacturer SKU: TUN6849134 SKU: 6849134-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: CNMG090308 GT720 Tungaloy-Wendeplatte Manufacturer: Tungaloy Application: Drehen UID: 6849134-Tungaloy Facts Thickness: 3.18 mm Corner radius: 0.8 mm Size: 09 Included angle: 80° Relief angle: 0° Special features Cermet grade GT720 Double‑sided chipbreaker Rhombic plate form Cylindrical hole (with hole) ISO designation CNMG090308 Compatible with appropriate holders, underlay/klemmsatz and replacement screws FAQ What machining tasks is this insert best suited for? The CNMG 090308 GT720 indexable turning insert is best suited for finishing and light turning of steel, offering a combination of surface quality and dimensional control. How does the GT720 grade improve surface finish? GT720 is a cermet grade formulated to promote even wear and a fine cutting edge, which helps to produce a consistent, high‑quality surface finish during finishing operations with the CNMG geometry. Can the insert be used on internal turning operations? Yes, the geometry and form are suitable for both external and internal turning, provided the correct holder and clamping arrangement are used to ensure stability. How many cutting edges are available per insert? The insert features a double‑sided chipbreaker, which provides two usable cutting edges per index and supports economical edge rotation. What should be checked for holder compatibility? Compatibility is determined by form, relief angle, tolerance class, fastening type, size and thickness; confirm these parameters against the holder specifications before fitting the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 NS9530 Wendeplatten - Tungaloy
CNMG 090308 NS9530 – Tungaloy Wendeplatte zum Drehen CNMG090308 NS9530 ist eine ISO-genormte rhombische Drehwendeschneidplatte zur präzisen Schlichtbearbeitung von Stahl ISO-genormte CNMG-Form für standardisierte Halter Schlichtsorte NS9530 für hohe Oberflächengüte Doppelseitiger Spanbrecher für konstante Spanbildung Rhombische Platte mit zylindrischem Loch für stabile Befestigung Eckenradius 0,8 mm für feine Konturtreue Hervorragende Schneidstoffeigenschaften für feine Oberflächen Die CNMG090308 NS9530 nutzt einen unbeschichteten Cermet-Schneidstoff, der speziell als Schlichtsorte für Stahl entwickelt wurde. Dadurch entstehen niedrige Schnittkräfte und eine deutlich verbesserte Oberflächengüte, was Nachbearbeitung reduziert und die Prozesssicherheit erhöht. Anwender profitieren von einer scharfen Schneidkante, die besonders bei kontinuierlichen Schnitten und kleinen Zustellungen stabile Ergebnisse liefert. Systemkompetenz und Einsatzbereich für produktive Fertigung ISO-Drehwendeschneidplatten wie diese sind Teil eines kompletten Systems: Platte, Außenhalter oder Bohrstange, Unterlage und Befestigungsschraube bestimmen die Gesamtperformance. Dank der rhombischen Form und des doppelseitigen Spanbrechers eignet sich die Platte für Außen- und Innendrehen; die Wahl von Spanbrecher und Sorte richtet sich nach Werkstoff, Bearbeitungsart und Stabilität der Aufspannung. So lässt sich in der Fertigung eine konstante, produktive Zerspanung realisieren. Wirtschaftlichkeit und Zielgruppe in der Zerspanung Für Fertigungsbetriebe, die auf konstante Oberflächen und wirtschaftliche Prozesse achten, bietet die Platte eine hohe Wiederholgenauigkeit und lange Standzeit bei Schlichtoperationen. Ein Eckenradius 0,8 mm gewährleistet feine Konturen bei Präzisionsbauteilen. Anwender aus Serienfertigung und Einzelteilbearbeitung finden hier eine praxisnahe Lösung, die Durchsatz und Teilequalität nachhaltig verbessert. Empfehlung: Die CNMG090308 NS9530 von Tungaloy ist die erste Wahl für anspruchsvolle Schlichtbearbeitungen an Stahl – technische Beratung per EMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6998133 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CNMG090308 Daten Eckenradius: 0,8 mm Plattendicke: 3,18 mm Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: NS9530 — Schlichtsorte für Stahl Schneidstofftyp: unbeschichtetes Cermet Plattenform: rhombisch Plattengröße: 09 Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch Einsatz: Drehen Typische Anwendung: Außen- und Innendrehen FAQ Für welche Werkstoffe ist die Platte geeignet? Die CNMG090308 NS9530 Wendeplatte von Tungaloy ist speziell als Schlichtsorte für Stahl ausgelegt und erzielt dort niedrige Schnittkräfte und hohe Oberflächengüten. Welche Vorteile bietet der unbeschichtete Cermet-Schneidstoff? Unbeschichtetes Cermet in der CNMG090308 NS9530 sorgt für eine scharfe Schneidkante und geringe Schnittkräfte, was besonders bei kontinuierlichen Schnitten und kleinen Zustellungen zu besseren Oberflächen und längeren Standzeiten führt. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,8 mm bietet eine feine Konturtreue und reduziert gleichzeitig Spitzenbeanspruchungen, wodurch präzise Konturen mit stabiler Spanbildung möglich sind. Ist die Platte auf Standardhalter kompatibel? Ja, die CNMG090308 NS9530 ist ISO-genormt; die Kompatibilität zum Halter wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichergestellt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 090308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing, low cutting forces and ISO conformity for efficient production. The uncoated cermet grade NS9530 delivers superior surface quality in continuous turning operations; order the CNMG090308 NS9530 Tungaloy insert directly via Metav Werkzeuge or consult the technical team for tailored application advice. CNMG 090308 NS9530 — Turning insert (ISO CNMG), uncoated cermet, Tungaloy CNMG090308 NS9530 is a rhombic ISO turning insert designed for fine finishing of steel under continuous-cut conditions and small depths of cut ISO‑standard CNMG 090308 geometry Uncoated cermet grade NS9530 for fine finishing Low cutting forces and high surface finish Double-sided insert with cylindrical hole Reliable finishing for continuous turning and fine surfaces The CNMG090308 NS9530 insert is engineered as a finishing grade for steel, combining a sharp cutting edge with low cutting forces to reduce chatter and improve stability during continuous cuts. The uncoated cermet grade NS9530 offers a predictable wear pattern and maintains a clean cutting edge, which directly translates into a high surface finish and reduced need for subsequent dressing or rework. For operations requiring consistent part-to-part quality, this geometry supports repeatable results with small depths of cut. Quick holder compatibility and reduced machine downtime The ISO rhombic form ensures straightforward interchangeability with standard CNMG holders; compatibility depends on geometry, relief, tolerance class, fastening, size and thickness. The insert has an included angle of 80° and a relief angle of 0°, with a plate thickness of 3.18 mm and a corner radius of 0.8 mm, which aids in predictable tool behaviour. The cylindrical hole provides reliable clamping and rapid indexation, so tool changes become faster and setup times are minimised, improving overall productivity in batch or single‑piece production. Stable chip control and productive cutting strategy Equipped with a double-sided arrangement and a double-sided chipbreaker, the insert supports two usable cutting edges and improved chip formation. Selecting the correct chipbreaker and grade according to the workpiece material, machining method and system rigidity is essential: a suitable chipbreaker ensures stable evacuation, reduces thermal load on the insert and supports continuous operation. The tooling system typically comprises the ISO turning insert, a matching external holder or boring bar, a support pad/clamping set and replacement screws — arranging these components optimally enhances process reliability. Application guidance for efficient finishing and tool life As a finishing solution, the insert is best applied to operations with small radial or axial engagement and stable machine conditions; this setup exploits the NS9530 grade’s ability to maintain a sharp cutting edge and deliver consistent surface integrity. The combination of ISO conformity and the finishing cermet grade supports predictable tool performance, allowing planning of tool indexing intervals and spare‑part provisioning. For complex setups or borderline materials, consultation on holder choice and chipbreaker selection helps to maximise the insert’s productive life and minimise cycle variability. Contact Metav Werkzeuge for application guidance and to request the Tungaloy CNMG090308 NS9530 finishing insert. Technical data Article number: 6998137-Tungaloy Manufacturer article number: 6998137 Manufacturer SKU: TUN6998137 Model series: ISO-Drehwendeschneidplatten Type designation: CNMG090308 Facts Included angle: 80° Relief angle: 0° Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 09 Double-sided insert With cylindrical hole Special features Uncoated cermet grade NS9530 Designed for turning (finishing) of steel Double-sided chipbreaker ISO‑standard geometry for holder compatibility System components: insert, outer holder/boring bar, support pad/clamping set, spare screws Manufacturer: Tungaloy FAQ What materials is this insert suitable for? The CNMG090308 NS9530 insert is a finishing grade for steel, optimised for continuous cuts and small depths of cut to achieve a high surface finish. How many cutting edges are available per insert? The insert is double-sided, providing two usable cutting edges and enabling economical indexation. Which geometry and angles does the insert use? The geometry is ISO CNMG with an included angle of 80° and a relief angle of 0°, suited for standard CNMG holders. Is the insert supplied with a chipbreaker? Yes, the product features a double-sided chipbreaker; selecting the correct chipbreaker and grade is recommended based on material and machining stability. How is the insert fastened in the holder? The insert comes with a cylindrical hole for secure clamping; compatibility with a holder depends on form, tolerance class, fastening method, size and thickness. Can this insert be used for heavy roughing operations? The NS9530 grade is a finishing cermet intended for low cutting forces and fine surface quality; it is not designed for aggressive roughing cuts. What is included in the tooling system for this insert? A complete system typically includes the ISO insert, a matching external holder or boring bar, a support pad/clamping set and replacement screws to ensure correct mounting and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 T6215 Wendeplatten - Tungaloy
Taking advantage of the combination of CVD-coated carbide grade T6215 and a stable ISO rhombic geometry delivers reliable performance when machining stainless steels; the result is consistent tool life and predictable component quality. Order the insert via Metav Werkzeuge or consult the technical team for material- and holder-specific recommendations. CNMG 090308 T6215 ISO turning insert for turning — Tungaloy CNMG 090308 T6215 is a rhombic ISO turning insert designed for external and internal turning operations; the insert suits stable to slightly interrupted cuts and is optimised for machining stainless steels with a CVD-coated carbide grade. ISO rhombic CNMG 090308 geometry CVD-coated carbide grade T6215 Double-sided chipbreaker for stainless steel 0° clearance and 3.18 mm thickness Durable grade for steady production runs The CVD-coated carbide T6215 offers high wear resistance, which reduces the frequency of index changes in batch and continuous production. The coating stabilises the cutting edge under the heat and work-hardening tendencies of stainless steel, so tool life becomes more predictable and process planning simpler. This controlled wear translates into fewer machine stops and a more economical machining cycle without compromising dimensional stability or repeatability. Geometry and clamping that improve process security The ISO rhombic geometry in combination with the 0° clearance and the 3.18 mm thickness provides a rigid contact area between insert and holder. The cylindrical hole and standard ISO form ensure compatibility with widely used external holders and boring bars, reducing the risk of incorrect seating and vibration. As a result, setup consistency is improved and the likelihood of chatter or uncontrolled deflection during turning is minimised, supporting higher-quality surface finishes. Chip control and surface integrity for stainless applications Equipped with a double-sided chipbreaker, the insert shapes chips reliably when turning ductile, work-hardening alloys. The designed chip flow reduces the tendency to form long, stringy chips and eases evacuation from the cutting zone, which helps maintain steady cutting forces and prevents rubbing. The outcome is improved surface integrity and fewer secondary operations for rework, which supports tighter production schedules and better first-pass yields. Fast integration into existing tool systems and dependable supply Being an ISO-standard insert, the item integrates into established toolholding systems with minimal adjustment. The standardised dimensions and the proven CVD-coated carbide construction simplify tool selection across mixed-material production. Backed by Tungaloy’s manufacturing expertise, the insert supports reproducible results and consistent edge quality, giving process engineers a pragmatic combination of performance and reliability for production turning. For application-specific advice or to secure supply of Tungaloy CNMG 090308 T6215 turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and ordering support Technical Data Article number: 6903012 Manufacturer SKU: TUN6903012 SKU: 6903012-Tungaloy Designation: CNMG090308 Grade: T6215 Numbers / Core technical data Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Size: 09 Special features / Versions CVD-coated carbide Rhombic insert (CNMG) Double-sided chipbreaker With cylindrical hole ISO-standard turning insert Suitable for turning stainless steels For stable to slightly interrupted cuts FAQ Is the insert compatible with standard CNMG holders? The CNMG090308 T6215 insert follows ISO rhombic dimensions and the cylindrical-hole design, so it is compatible with standard CNMG external holders and boring bars when the holder accepts the 09 size and the specified thickness. Which materials are recommended for this grade? The T6215 grade is formulated and coated for stainless steel machining under stable to lightly interrupted conditions; it performs well where work hardening and abrasion are primary concerns. Can the insert be used in interrupted cuts? This insert is suitable for stable to slightly interrupted cuts; heavy interruptions or highly unstable setups may require a geometry or grade tailored for shock resistance. How does the double-sided chipbreaker benefit the process? The double-sided chipbreaker improves chip control for ductile alloys, promoting short, controllable chips and reducing the risk of chip entanglement, which supports surface quality and unattended run times. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090308 T9205 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide T9205 with the ISO‑standard CNMG geometry delivers wear resistance and stable chip control for productive steel turning; the double‑sided chipbreaker and 0.8 mm corner radius support consistent surface finish at higher cutting speeds. Order genuine Tungaloy inserts through Metav Werkzeuge or consult our technical advisors for machining recommendations. CNMG090308 T9205 Tungaloy insert — ISO rhombic turning insert for steel turning The CNMG090308 T9205 is an ISO‑standard rhombic turning insert designed for productive external and internal turning of steel under stable machining conditions. CVD‑coated carbide grade T9205 Optimised for productive steel turning Double‑sided chipbreaker for consistent chips Corner radius 0.8 mm, 0° clearance Faster cycles with a wear‑resistant grade The T9205 CVD‑coated carbide offers elevated wear resistance compared with uncoated grades, which enables higher cutting speeds and longer intervals between indexings. In practical terms, the coating reduces flank wear under stable setups, supporting sustained productivity in medium‑ to high‑speed turning operations. For workshops aiming to increase throughput without compromising surface quality, the combination of a robust coating and a stable substrate delivers measurable cycle time gains. Secure compatibility and straightforward clamping ISO‑standard geometry ensures straightforward selection of a matching holder: compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert features a cylindrical hole for reliable fixing and a 3.18 mm plate thickness that matches common ISO holders. Clear identification of geometry and tolerance makes it easier to select a suitable external holder or boring bar, reducing setup time and the risk of mismatched components. Predictable chip control and surface finish The double‑sided chipbreaker is engineered for steady chip formation when machining steel, lowering the likelihood of stringy chips and improving swarf evacuation. Paired with the 0.8 mm corner radius, the insert contributes to consistent surface integrity and dimensional stability on turned parts. Where finish and repeatability matter, this geometry supports predictable results under stable clamping and correct feed/speed settings. Application guidance and material suitability Designed primarily for turning applications, the insert is best deployed in external and internal turning of steel under stable conditions. Selection of the appropriate chipbreaker and grade is essential: the T9205 grade suits productive machining of steel at increased speeds, while correct holder choice and machining parameters safeguard tool life. If further process data is required—cutting speed, feed or coolant advice—contact the technical team for tailored recommendations. Contact Metav Werkzeuge for genuine Tungaloy T9205 inserts and expert machining guidance—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785689 SKU: 6785689-Tungaloy Manufacturer SKU: TUN6785689 Brand: Tungaloy Material: Carbide Model series: ISO‑Drehwendeschneidplatten Application: Turning Facts Insert designation: CNMG090308 Grade: T9205 Thickness: 3.18 mm Insert size: 09 Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° Hole: with cylindrical hole Chipbreaker: double‑sided Special features CVD‑coated carbide grade T9205 Rhombic insert form (ISO) Suitable for external and internal turning of steel Compatibility depends on form, relief angle, tolerance, clamping, size and thickness FAQ What materials is this insert designed for? The CNMG090308 T9205 insert is formulated for productive turning of steel; the CVD coating enhances wear resistance in such applications. How does the T9205 grade improve machining performance? The T9205 CVD‑coated carbide reduces flank wear at increased speeds, allowing longer tool life and more consistent surface finish on steel components. How is the insert fixed in the holder? The insert features a cylindrical hole and is designed to be clamped in ISO‑compatible holders; correct matching of form, relief angle and tolerance class is essential. Is this insert suitable for both external and internal turning? Yes—this ISO rhombic insert is suitable for external and internal turning, provided stable clamping and an appropriate chipbreaker are used. What benefits does the double‑sided chipbreaker provide? The double‑sided chipbreaker promotes reliable chip formation and evacuation, which helps maintain consistent machining and reduces interruptions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090308 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9215 grade together with the ISO rhombic geometry to achieve higher productivity and consistent wear resistance in medium‑steel turning; the double‑sided chipbreaker and stable 0.8 mm corner radius contribute to reliable chip control and longer tool life. Order the inserts directly via Metav Werkzeuge or consult our specialists for application support. CNMG 090308 T9215 — ISO rhombic turning insert by Tungaloy (CVD‑coated carbide, double‑sided chipbreaker) The CNMG090308 T9215 is an ISO‑standard rhombic turning insert designed for external and internal turning in medium‑steel applications, combining a robust CVD coating with a geometry optimised for productivity and process stability. ISO rhombic insert CNMG090308 CVD‑coated carbide T9215 for medium steel Double‑sided chipbreaker for consistent control 0.8 mm corner radius and 3.18 mm thickness Reliable cutting performance for medium‑steel turning The combination of a CVD‑coated carbide base with the T9215 grade provides a balanced mix of wear resistance and fracture toughness, making it a practical choice for continuous to slightly interrupted cuts in medium steels. The coating reduces abrasive wear and thermal loading at the cutting edge, which translates into longer effective tool life and improved process consistency. For production lines focusing on throughput, this balance supports higher metal removal rates while maintaining acceptable edge stability and surface integrity. Geometry that supports setup simplicity and edge strength The ISO rhombic shape with an included angle suitable for general turning offers predictable engagement and simple seat‑up in compatible toolholders. The insert's 0° relief angle, 0.8 mm corner radius and 3.18 mm thickness increase edge support and reduce the risk of chipping under moderate interruptions. These geometric choices help maintain dimensional accuracy over longer tool life and simplify holder selection, since compatibility is governed by form, relief angle, tolerance class, fastening, size and thickness — standard parameters for ISO‑type turning systems. Chip control and process stability for consistent results The double‑sided chipbreaker is engineered to promote controlled chip formation when machining medium steels, reducing chip tangling and improving evacuation from the cut. Better chip control reduces secondary operations and machine downtime while enhancing surface quality, which supports repeatable parts production. In automated or semi‑automated turning cells, this predictable chip behaviour contributes directly to higher overall equipment effectiveness and fewer unplanned interventions. Practical integration into production workflows Integration of the insert into a turning system is straightforward: pair the insert with a suitable external holder or boring bar, underlay/shim and the recommended clamp and screws. Attention to holder compatibility and correct mounting ensures the intended cutting geometry and repeatability. For selection, match the chipbreaker and grade to the workpiece material and process stability; where vibration or heavy interruptions are expected, opt for more robust clamping and consider adjusting feed to benefit from the insert's supported edge strength. For specific cutting data or series production parameters, rely on supplier recommendations or consult technical support. For tailored cutting data, availability and to source the CNMG 090308 T9215 inserts from Tungaloy, contact Metav Werkzeuge for expert guidance and prompt supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6772172 Manufacturer SKU: TUN6772172 Model series: ISO turning inserts Designation: CNMG090308 Material: carbide Core specifications Corner radius: 0.8 mm Thickness: 3.18 mm Insert size: 09 Included angle: 80° Relief angle: 0° Hole: cylindrical Features Coating: CVD‑coated carbide (T9215) Chipbreaker: double‑sided Plate form: rhombic Application: turning (external and internal) System note: compatibility via form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert intended for? The CNMG090308 T9215 insert is specified for medium‑steel machining and performs best in continuous to slightly interrupted turning operations on steel grades within that range. What advantages does the T9215 grade offer? The T9215 grade combines CVD coating and a carbide substrate to deliver enhanced wear resistance with good fracture toughness, supporting higher productivity and dependable edge life in medium‑steel turning. Is this insert indexable and reversible? Yes — the insert is double‑sided with a chipbreaker on both faces, allowing indexing to a fresh cutting edge and therefore multiple effective cutting positions per insert. What are the key geometric values to consider for holder selection? Important values are the corner radius (0.8 mm), thickness (3.18 mm), insert size (09), relief angle (0°) and the rhombic plate form; holders must match these parameters and the ISO designation for secure and repeatable clamping. How should chip control be managed with this insert? Use the built‑in double‑sided chipbreaker and select appropriate feeds and depths for the workpiece stability; the chipbreaker promotes compact chips and improved evacuation, reducing secondary handling and machine interruptions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090308 T9215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and reliable edge security combined with easy integration into ISO tool systems for steady productivity. Order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. CNMG090308 T9215 indexable turning insert for turning – Tungaloy CNMG090308 T9215 is an ISO rhombic indexable insert for external and internal turning, optimised for medium steel machining and continuous to light interrupted cuts CVD-coated carbide grade T9215 Rhombic CNMG 09 profile, 80° lead angle 0.8 mm corner radius for robust edge Double-sided chipbreaker, cylindrical hole High productivity through optimised grade and coating The insert combines a CVD-coated carbide substrate with the T9215 grade, offering an advantageous balance between wear resistance and fracture toughness. This composition is particularly effective in demanding medium-steel applications, where steady tool life reduces changeover frequency and improves overall throughput. The CVD-coated carbide surface helps maintain edge integrity at elevated temperatures, which translates directly into consistent part quality and fewer unscheduled stops. Precise geometry for reliable clamping and predictable results Designed to the ISO CNMG form, the insert features an 80° lead angle, 0° clearance, 3.18 mm thickness and a 0.8 mm corner radius, all of which contribute to stable machining forces and repeatable surface finish. Compatibility with holders depends on form, clearance, tolerance class, fixing method, size and thickness; this standardised approach simplifies tool selection and reduces fitting errors. The double-sided chipbreaker and cylindrical hole further support secure mounting and straightforward indexing, helping maintain process stability in batch and single-piece flows. Practical benefits for shop-floor efficiency and process security Choosing this insert supports higher productivity through fewer tool changes and predictable wear behaviour in continuous to lightly interrupted cuts. The T9215 grade is aimed at delivering long, reliable edge life while retaining enough toughness to withstand minor interruptions, making it a practical choice for mixed-production environments. For specific holder matching or optimisation of cutting data, Metav Werkzeuge offers technical advice to ensure the insert integrates into existing tool systems without compromising cycle time or surface quality. For application-specific advice and quick supply of the CNMG090308 T9215 insert, contact Metav Werkzeuge for tailored recommendations: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6773900 SKU: 6773900-Tungaloy Manufacturer SKU: TUN6773900 Model series: ISO-Drehwendeschneidplatten Facts Thickness: 3.18 mm Corner radius: 0.8 mm Lead/approach angle: 80° Clearance angle: 0° Size: 09 Special features Material: carbide Coating: CVD-coated Grade: T9215 Plate form: rhombic (CNMG) Chipbreaker: double-sided Hole style: cylindrical hole Application: turning; external and internal System components: ISO insert, clamping set and matching holder FAQ What materials is this insert intended for? The T9215 grade in the CNMG090308 insert is optimised for medium steel machining, combining good wear resistance with toughness for continuous to lightly interrupted cuts. How is compatibility with holders determined? Compatibility depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; these parameters ensure correct seating and clamping in ISO-compatible holders. Is the insert coated and what does that mean for performance? Yes, the CNMG090308 uses a CVD-coated carbide which improves thermal resistance and reduces flank wear, resulting in more consistent edge life under heavy-duty steel turning. Does the insert offer indexable edges or single-use edges? The insert features a double-sided chipbreaker, providing multiple indexable cutting edges that allow rotation and reuse until the edges are worn. What are the key dimensions to check before ordering? Important dimensions include the plate size (09), thickness (3.18 mm), corner radius (0.8 mm) and lead angle (80°); these must match the holder specifications for safe and accurate machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com