CNMG 090402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and ISO interchangeability to keep turning cycles productive and predictable; order genuine inserts via Metav Werkzeuge or consult our specialists for holder compatibility. CNMG090402 T9215 turning insert, CVD-coated carbide, 0.2 mm radius – Tungaloy A CNMG090402 T9215 insert designed for external and internal turning, optimised for medium steel machining with continuous to slightly interrupted cuts CVD-coated carbide grade T9215 for medium steel ISO CNMG 09 rhombic insert with 80° included angle Double-sided chipbreaker with cylindrical hole 0.2 mm corner radius and 4.76 mm thickness Boosted productivity through wear-resistant cutting grade The T9215 grade combines a CVD-coated finish with a wear-resistant carbide substrate to provide elevated tool life under continuous and lightly interrupted turning. This material pairing reduces flank wear and preserves cutting edge integrity, which translates to fewer tool changes and steadier cycle times. The result is reliable, repeatable performance and a reduction in setup interruptions when machining medium-strength steels, supporting a more stable production flow. Robust geometry for secure cutting and versatility The ISO CNMG rhombic geometry with an 80° included angle and 0.2 mm corner radius gives a balance between strength and edge definition suitable for general turning tasks. The double-sided chipbreaker and cylindrical hole ensure stable clamping and predictable chip control, while the 4.76 mm plate thickness contributes to edge rigidity. These geometric choices make the insert appropriate for both light finishing and more demanding external operations when paired with a correctly matched holder. Simple integration into ISO tool systems Designed as an ISO-standard indexable insert, compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness. When mounted in a suitable CNMG-capable external holder or boring bar and secured with the appropriate backing/clamp set and screws, the insert delivers consistent seating and repeatable results. The combination of standard sizing and robust cutting grade simplifies inventory management and reduces the need for special tooling, aiding operational efficiency. Application guidance and practical advantages This insert is a first choice for medium steel machining, offering a productive compromise between wear resistance and fracture toughness for continuous to slightly interrupted cuts. The CVD-coated surface supports higher cutting speeds and improved surface finishes under stable conditions, while the rhombic form and double-sided chipbreaker broaden the range of compatible machining tasks. For best results, match the insert grade and chipbreaker to material, machining style and machine stability to exploit the grade’s full potential. Contact Metav Werkzeuge today for genuine Tungaloy CNMG090402 T9215 inserts, expert guidance on holder compatibility and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944521 Manufacturer SKU: TUN6944521 Name: CNMG090402 T9215 Tungaloy insert Brand: Tungaloy Facts Corner radius: 0.2 mm Plate thickness: 4.76 mm Insert size: 09 Included angle: 80° Clearance angle: 0° Hole style: cylindrical hole Chipbreaker: double-sided Special features Material: carbide Coating: CVD Grade: T9215 Insert shape: rhombic (CNMG) Application: turning (external and internal) Typical use: medium steel, continuous to slightly interrupted cuts System components: ISO insert, compatible holder or boring bar, backing/clamp set and screws FAQ What materials is this grade intended for? The T9215 grade is intended primarily for medium steel; the CNMG090402 T9215 insert performs well in continuous to slightly interrupted turning of steel variants. How does the chipbreaker affect performance? The double-sided chipbreaker provides reliable chip control across a range of feeds and depths, helping to maintain surface quality and reduce chip-related interruptions when using the Tungaloy CNMG insert. Is the insert reversible and how many cutting edges are available? The rhombic CNMG format with a double-sided chipbreaker is indexable; the insert provides multiple usable edges per index based on standard CNMG geometry. What must be considered for holder compatibility? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; selecting an ISO-compatible holder that matches these parameters ensures correct seating and clamping. Can this insert handle interrupted cuts? Yes—the T9215 grade is suitable for continuous to slightly interrupted cuts; for heavy or severely interrupted machining, a more robust grade or adjusted cutting data is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9215 Wendeplatten - Tungaloy
Combining CVD-coated cemented carbide T9215, a double-sided chipbreaker and the ISO CNMG090402 form yields a durable, high-productivity turning solution for medium-steel applications — order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process setup. CNMG 090402 T9215 – Tungaloy indexable turning insert for turning A CNMG090402 T9215 indexable insert for external and internal turning, engineered for medium-steel machining with high productivity and reliable edge life CVD-coated cemented carbide grade T9215 Double-sided chipbreaker for chip control ISO CNMG090402 rhombic form with hole 0.2 mm corner radius for robust edge life High productivity through a CVD-coated cutting grade The core advantage of this insert is the CVD-coated cemented carbide substrate matched to grade T9215, which combines elevated wear resistance with fracture toughness suitable for continuous to lightly interrupted cuts. This composition reduces flank wear and extends tool life, translating directly into fewer indexings and higher cumulative machining throughput. For workshops seeking consistent cycle times on medium-alloy steels, the combination of coating and substrate provides a measurable efficiency gain while maintaining surface integrity. Reliable compatibility and predictable set-up with ISO form The ISO CNMG090402 designation and the rhombic geometry with a central hole ensure straightforward integration into ISO-compatible turning holders. Compatibility is governed by form, clearance angle, tolerance class, clamping method, size and thickness; the rhombic form and 0° clearance are optimised for versatile orientation and repeatable clamping. Specifying the correct holder and underlay plate avoids unexpected run-out and secures the stated cutting performance, making tool changeovers faster and setup more predictable for production environments. Controlled chips and stable cutting under real conditions The double-sided chipbreaker and a 0.2 mm corner radius deliver controlled chip formation and a robust cutting edge for both external and internal operations. With a plate thickness of 4.76 mm, the insert offers structural stiffness that resists edge collapse during interrupted cuts, while the cylindrical hole enables secure clamping and easy indexation. This combination reduces unplanned downtime and improves surface finish consistency, contributing to lower unit costs and greater confidence in process stability. For guidance on holder selection or cutting parameters, the technical team at Metav Werkzeuge provides application support to match the insert to machine rigidity and workpiece material. Contact Metav Werkzeuge for tailored holder recommendations and to order the Tungaloy CNMG090402 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6782308 SKU: 6782308-Tungaloy Manufacturer SKU: TUN6782308 Model series: ISO turning indexable inserts Material: cemented carbide Numbers / Core Technical Data Thickness: 4.76 mm Corner radius: 0.2 mm Insert size: 09 Clearance angle: 0° Cutting edge angle: 80° ISO designation: 090402 Designs / Special features Rhombic plate form With hole — cylindrical hole Double-sided chipbreaker Grade T9215, CVD-coated cemented carbide Compatibility determined by form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert suited for? This Tungaloy CNMG090402 T9215 insert is designed primarily for medium-steel machining and provides a balance of wear resistance and toughness for productive turning operations. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker and the insert geometry; the grade T9215 and the rhombic form support consistent chip shaping under continuous to slightly interrupted cuts. Can this insert be used for internal turning? Yes, the rhombic geometry and secure clamping via the cylindrical hole make the insert suitable for both external and internal turning applications when used with appropriate holders. Which holders are compatible with the ISO CNMG090402 form? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; matching an ISO-compatible holder to the CNMG090402 form ensures correct seating and repeatable performance. What are the key dimensional details to check before ordering? Verify the insert thickness (4.76 mm), corner radius (0.2 mm), insert size (09) and the ISO designation 090402; these ensure correct fit and expected cutting behaviour with the chosen holder Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9215 Wendeplatten - Tungaloy
Combining the CVD‑coated T9215 grade with a 0.2 mm corner radius and a double‑sided chipbreaker yields a durable, productivity‑orientated turning solution for medium steel machining; order the insert directly via Metav Werkzeuge or consult our specialists for tailored application support. CNMG 090402 T9215 Tungaloy – ISO turning insert with CVD‑coated carbide, rhomboid form, 0° relief CNMG 090402 T9215 is an ISO‑standard turning insert designed for medium steel machining and compatible ISO holders; its rhomboid form and cylindrical hole ensure secure clamping and repeatable positioning. CVD‑coated carbide grade T9215 0.2 mm corner radius Double‑sided chipbreaker ISO CNMG compatibility High throughput with controlled wear for medium steel The CVD‑coated carbide composition of the T9215 grade delivers a robust combination of wear resistance and fracture toughness that is particularly suited to medium steel applications. The coating reduces flank and crater wear under continuous to lightly interrupted cuts, which translates into longer effective tool life and fewer index changes. Specifying an insert with a 0.2 mm corner radius helps maintain dimensional stability on external profiles while balancing edge strength; this trade‑off supports higher feed rates without sacrificing surface integrity. The overall result is a measurable improvement in machining consistency and productivity when replacing conventional uncoated or lower‑grade inserts. Secure fit and ISO compatibility to reduce downtime Belonging to the ISO turning insert series, the CNMG 090402 geometry is defined so that compatibility with the toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness. The rhomboid plate shape and the cylindrical centre hole provide reliable clamping and repeatable indexing in matched CNMG holders or boring bars. With a plate thickness of 4.76 mm and a nominal included angle of 80°, the insert sits stably in the pocket, reducing chatter and facilitating predictable wear patterns. Clear fitment standards lower the risk of incorrect assembly and shorten tool changeover times, contributing to smoother process flow on the shop floor. Optimised chip control for continuous productivity The double‑sided chipbreaker geometry is engineered to support effective chip formation and evacuation during routine turning operations. Good chip control reduces the likelihood of built‑up edge and workpiece marking, improving first‑pass quality and reducing rework. For continuous machining or light interruptions, the combination of the insert’s geometry and the T9215 grade maintains cutting stability, enabling longer uninterrupted runs and higher overall throughput. By reducing unexpected stops for edge changes and managing swarf more consistently, the insert helps maintain planned cycle times and labour efficiency. Grade and coating in plain terms The designation T9215 indicates a CVD‑coated carbide grade optimised for a wide range of steels; the coating provides a hard, heat‑resistant surface while the substrate retains core toughness, which helps prevent premature fracture under higher feed or interrupted cuts. The 0° relief means the insert is manufactured for neutral clearance suited to many turning setups; paired with the rhomboid CNMG shape, it supports both external and internal turning tasks when used with matching holders. For customers less familiar with coating technologies: CVD (chemical vapour deposition) creates a uniform, adherent layer that increases resistance to abrasive wear and thermal degradation, extending edge life in demanding production environments. For reliable medium‑steel turning with Tungaloy quality, contact Metav Werkzeuge for application advice or to arrange supply — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 — our specialists can confirm holder compatibility and recommended cutting strategies. Technical Data Article number: 6966067 Manufacturer SKU: TUN6966067 SKU: 6966067-Tungaloy Manufacturer: Tungaloy Facts Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 80° Relief angle: 0° Size: 09 Special features ISO designation: CNMG090402 Grade/coating: T9215 (CVD‑coated carbide) Plate form: rhomboid Hole: with hole, cylindrical hole Chipbreaker: double‑sided Application: turning FAQ What materials is this insert intended for? The CNMG 090402 T9215 insert is optimised for medium steel machining; the T9215 CVD‑coated carbide grade balances wear resistance and toughness for continuous to slightly interrupted turning operations. Will this insert fit existing CNMG holders? Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the CNMG090402 geometry matches standard CNMG toolholders when the pocket is specified for ISO CNMG inserts. What advantages does the T9215 coating provide? The CVD coating on the T9215 grade improves resistance to flank and crater wear and supports higher productivity by maintaining edge condition longer under elevated temperatures typical of continuous steel cutting. How does the double‑sided chipbreaker affect use? A double‑sided chipbreaker allows effective chip control on both usable faces of the insert, enhancing swarf management and surface finish during routine turning cycles. Is the corner radius suitable for profile turning? The 0.2 mm corner radius offers a compromise between edge strength and fine profile definition, making it suitable for many external turning profiles where a moderate radius is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Reliable machining for medium to heavy steel: CVD-coated carbide grade T9225 combines toughness with wear resistance, while the ISO CNMG090402 geometry and secure clamping deliver repeatable engagement; order directly via Metav Werkzeuge or consult our specialists for application advice and availability. CNMG 090402 T9225 turning insert – CVD-coated carbide, rhombic 80° – Tungaloy CNMG 090402 T9225 is a rhombic, ISO-format turning insert developed for external and internal turning in medium to heavy steel applications, offering robust performance where intermittent cuts and variable engagement demand extra toughness. CVD-coated carbide grade T9225 Universal for medium to heavy steel machining Rhombic 80° geometry, 0.2 mm corner radius Cylindrical hole and double-sided chipbreaker Consistent cutting performance that raises throughput The CVD-coated carbide composition of this insert delivers a balance of wear resistance and toughness, specifically formulated for the demands of medium to heavy steel turning. The T9225 grade provides stable chip formation under changing engagement conditions, which reduces unexpected downtime and supports more predictable tool life. Compatibility with ISO holders is governed by form, clearance angle, tolerance class, clamping method, size and thickness, so correct selection of the mating holder and clamping hardware is essential to realise the full productivity benefits. Geometry engineered for accuracy and repeatability The rhombic 80° shape combined with a 0° clearance and a 0.2 mm corner radius ensures reliable engagement and good surface finish in both external and internal turning. A plate thickness of 4.76 mm and the standard 09 size lend mechanical stiffness that improves stability at higher feeds. The cylindrical centre hole and double-sided chipbreaker design support quick indexing and economical usage of both sides, reducing per-cut costs while maintaining consistent cutting conditions across repetitive production runs. Clear guidance for application and tool selection Designed primarily for turning operations, the insert suits situations where slightly interrupted cuts or fluctuating contact require added toughness rather than a purely abrasive-resistant grade. The CVD coating protects the substrate at elevated temperatures and helps preserve the cutting edge when machining steel; carbide substrate ensures rigidity and fracture resistance. Choose the chipbreaker and clamping arrangement according to workpiece material, required surface finish and machine stability to achieve the intended balance of productivity and tool life. For reliable supply and application support of Tungaloy CNMG090402 T9225 inserts, contact Metav Werkzeuge for order placement and practical machining advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6787102 Manufacturer SKU: TUN6787102 Model series: ISO turning inserts Facts ISO designation: CNMG090402 Insert size: 09 Thickness: 4.76 mm Nose radius: 0.2 mm Clearance angle: 0° Approach angle: 80° Special features Grade: T9225 Material: carbide Coating: CVD-coated Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ Is this insert suitable for medium and heavy steel turning? Yes. The CNMG090402 T9225 turning insert from Tungaloy is a universal, robust grade designed for medium to heavy steel machining and for operations with variable engagement. How does the T9225 grade improve process reliability? T9225 combines a carbide substrate with a CVD coating to give enhanced toughness and wear resistance; the result is stable chip formation and repeatable performance in the face of interrupted or changing cuts. What must be considered for holder compatibility? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; ensure the chosen holder matches the CNMG090402 profile and the clamping hardware used. Can the insert be rotated or indexed on both sides? Yes. The double-sided chipbreaker and central cylindrical hole permit economical indexing and use of the second cutting edge, improving cost-efficiency per edge for repeat production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide T9225 combined with a 0.2 mm nose radius and ISO rhombic geometry delivers stable chip control and consistent tool life under medium-to-heavy cutting conditions. Compatibility with standard CNMG holders ensures rapid index changes and process reliability. Order the CNMG090402 T9225 directly via Metav Werkzeuge or ask our consultants if needed. CNMG090402 T9225 Turning insert — rhombic CNMG, 80° included angle | Tungaloy The CNMG090402 T9225 is an ISO-standard rhombic turning insert engineered for external and internal turning applications; designed as a robust universal grade for variable engagement conditions and lightly interrupted cuts in steel machining. ISO rhombic insert CNMG090402 CVD-coated carbide grade T9225 0.2 mm nose radius for versatile turning Double-sided insert with cylindrical hole Productive performance for medium-to-heavy steel turning The insert’s CVD-coated carbide T9225 grade offers a balance of abrasion resistance and toughness that supports sustained productivity when machining steel under changing engagement and intermittent cut conditions. The coating improves resistance to built-up edge and thermal wear, which translates into longer tool life and fewer indexings. Thanks to the universal character of the grade, the component is suitable for roughing and semi-finishing passes where consistent material removal rates and predictable flank wear are required, helping to reduce downtime and improve overall process efficiency. Precision geometry and reliable clamping for consistent results With a rhombic profile and an 80° included angle, the insert provides good edge strength and versatility across turning motions. The 0.2 mm nose radius supports a reliable surface finish while maintaining sufficient edge robustness for heavier cuts. The insert’s design, including a cylindrical hole, ensures secure mounting in ISO CNMG holders and compatibility with common external holders and boring bars; this reduces setup time and minimises vibration. Together, geometry and secure clamping enable repeatable dimensional accuracy and predictable tool performance across batch runs. Practical selection and process advice for stable chip control The double-sided chipbreaker configuration and the insert’s universal grade make it straightforward to select a cutting data window: choose the chipbreaker and insert grade to match the workpiece material and rigidity of the setup. Where interrupted cuts occur or workpiece support is limited, the tougher T9225 grade helps prevent premature edge chipping. For finishing passes a smaller nose radius and higher cutting speed may be used for improved surface quality, while roughing benefits from increased feed and a focus on stable clamping. The term CVD coating here refers to a chemical vapour deposition layer that enhances surface hardness and wear resistance without sacrificing substrate toughness. For reliable medium-to-heavy steel turning with Tungaloy performance, contact Metav Werkzeuge for tailored advice or to procure the CNMG090402 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6787098 Manufacturer SKU: TUN6787098 SKU: 6787098-Tungaloy Designation: CNMG090402 T9225 Tungaloy-Wendeplatte Facts Included angle: 80° Nose radius: 0.2 mm Thickness: 4.76 mm Size: 09 Free angle (rake): 0° Hole style: cylindrical hole Special features CVD-coated carbide grade T9225 Double-sided chipbreaker Rhombic plate form (CNMG) ISO-standard turning insert With hole for secure clamping FAQ Which turning operations suit this insert? The CNMG090402 T9225 is intended for external and internal turning; it performs well in medium-to-heavy steel removal where robustness and chip control are priorities. What materials are recommended for this grade? Tungaloy’s T9225 grade is a robust universal carbide suited primarily to various steel applications, especially where interrupted cuts or varying engagement demand increased toughness. How does the CVD coating benefit the tool life? The CVD-coated carbide construction reduces abrasive wear and improves thermal resistance; this combination extends the usable life of the cutting edge and stabilises performance during longer cutting cycles. Is the insert compatible with standard holders? Yes — the ISO CNMG geometry, cylindrical hole and specified dimensions make the CNMG090402 compatible with matching CNMG external holders and boring bars that accept ISO rhombic inserts. What should be considered when choosing the chipbreaker? Select a chipbreaker that matches the cutting mode and material: the double-sided chipbreaker on this insert provides flexibility to optimise chip formation for both roughing and semi-finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide and robust universal grade T9225 for stable chip control and extended tool life; the 80° rhombic geometry with a 0.2 mm corner radius ensures reliable performance in medium to heavy turning operations — order via Metav Werkzeuge or request advice from our consultants. CNMG 090402 090402 T9225 Turning insert — CNMG, CVD‑coated carbide, 80° rhombic by Tungaloy A CNMG090402 T9225 is an ISO‑standard rhombic turning insert developed for medium to heavy steel turning, offering a balanced mix of toughness and wear resistance for varying engagement conditions. CVD-coated carbide grade T9225 80° rhombic geometry, 0.2 mm radius Double-sided with cylindrical hole Designed for medium to heavy steel turning Reliable cutting performance for varying conditions The indexable insert combines a CVD‑coated carbide substrate with a robust universal grade, providing consistent cutting behaviour even under fluctuating engagement depths or briefly interrupted cuts. The T9225 formulation increases toughness, reducing the risk of chipping when conditions change; this contributes directly to process stability and fewer unplanned tool changes. In practice, stable chip formation improves surface finish and reduces cycle time, making the component valuable for production environments where predictable output is essential. Cost‑efficient use and simple indexing Being double‑sided and featuring a cylindrical hole, the insert delivers economical indexing: two usable cutting edges per side reduce tooling costs per part and speed up replacement procedures. The 0.2 mm corner radius balances edge strength and finish quality — a larger radius supports heavier cuts while still enabling acceptable surface integrity. The 80° rhombic geometry gives a versatile cutting orientation that suits both roughing and finishing passes, depending on toolholder choice and cutting parameters. Practical integration and holder compatibility Compatibility with a toolholder is determined by form, clearance angle (0°), tolerance class, fastening method, size and thickness; the ISO‑conformant design facilitates straightforward selection of matching holders and clamping sets. The plate thickness of 4.76 mm and size designation 09 make the insert suitable for standard external and internal turning holders. As a CVD‑coated carbide product designed for steel machining, the insert supports higher cutting speeds and improved edge life compared with uncoated grades, particularly where mixed cutting conditions demand additional toughness. Contact Metav Werkzeuge for application-specific advice on Tungaloy CVD‑coated carbide inserts and fast supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6966068 Manufacturer SKU: TUN6966068 SKU: 6966068-Tungaloy Manufacturer article number: 6966068 Facts Corner radius: 0.2 mm Geometry angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Size designation: 09 Special features Rhombic plate form (CNMG) CVD‑coated carbide grade T9225 Double‑sided with cylindrical hole Double‑sided chipbreaker Suitable for turning (external and internal) Designed for medium to heavy steel machining FAQ What materials is this insert intended for? The CNMG090402 T9225 insert is specified for medium to heavy steel machining; the CVD‑coated carbide and T9225 grade provide the toughness required for such applications. Is the insert indexable on standard ISO holders? Yes, the insert is ISO‑standard and compatible with holders that match its form, clearance angle, tolerance class, fastening method, size and thickness. How does the 0.2 mm corner radius affect cutting? A 0.2 mm radius increases edge strength for heavier cuts while still delivering a controlled surface finish; it is a compromise between robustness and fineness of finish. Can the insert be used for interrupted cuts? The T9225 grade offers enhanced toughness for fluctuating engagement and light interruptions, making it suitable for operations where the cut is not perfectly continuous. How many usable edges does the insert offer? The double‑sided design provides multiple indexing positions, reducing tooling costs and downtime through quicker edge changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD‑coated carbide grade, ISO conformity and a stable clamping design for consistent medium‑to‑heavy turning performance; order through Metav Werkzeuge or request tailored application advice. CNMG 090402 T9225 Turning Insert (ISO CNMG) — Tungaloy The CNMG090402 T9225 is an ISO‑standard rhombic indexable turning insert, CVD‑coated and designed for medium to heavy steel turning applications, featuring a 0.2 mm corner radius and a secure central hole for reliable clamping CVD‑coated carbide for robust performance Universal grade T9225 for medium–heavy steel ISO CNMG090402 rhombic insert, 80° cutting angle Consistent machining through a universal, wear‑resistant grade The combination of a CVD‑coated carbide substrate and the T9225 grade delivers a balance of toughness and wear resistance that suits interrupted cuts and varying engagement conditions. This means fewer tool changes and stable productivity during series production and batch work. The coating supports elevated cutting temperatures typical in steel turning, reducing flank wear while preserving the substrate’s fracture resistance. As a result, the component finish and repeatability remain reliable over longer tool lives. Secure clamping and dimensional conformity for process stability An ISO‑conforming rhombic geometry with a central cylindrical hole and an included thickness of 4.76 mm ensures repeatable seating in standard CNMG holders. The 80° cutting angle combined with a 0° clearance provides predictable cutting forces and easy toolpath programming. The central hole and standard tolerances contribute to vibration dampening and consistent seat contact, which in turn improves surface quality and reduces the risk of unexpected insert movement under load. Practical chip control and adaptability at the machine The double‑sided chipbreaker design supplies effective chip segmentation across a range of feeds, improving evacuation in both external and internal turning operations. Because chip control and cutting geometry are matched to the grade, the insert adapts well to changing depths of cut and interrupted surfaces, lowering the likelihood of built‑up edge and facilitating faster cycle times. For workshops that tackle mixed series or variable workpiece geometries, this adaptability reduces setup complexity and boosts overall throughput. Compatibility and system‑level benefits for workshop integration Being an ISO‑standard CNMG insert, compatibility with existing toolholders, clamping kits and replacement screws is straightforward where holders match form, clearance angle, tolerance class, fixing method, size and thickness. The insert integrates into standard turning systems consisting of an ISO insert, a suitable external holder or boring bar, and the necessary shims and screws, simplifying stock management and reducing procurement effort. Clear labelling and SKU alignment ease traceability in production environments. For application guidance or to check availability of Tungaloy CNMG090402 T9225 inserts, contact Metav Werkzeuge for personalised advice and order support via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6944522 Manufacturer SKU: TUN6944522 Material: Carbide Model series: ISO turning inserts Name: CNMG090402 T9225 Facts Cutting angle: 80° Insert size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Clearance (relief) angle: 0° Hole: with hole (cylindrical) Special features Grade/coating: T9225, CVD‑coated carbide Geometry: rhombic CNMG form Chipbreaker: double‑sided chip control Application: turning, external and internal turning System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The CNMG090402 T9225 insert is formulated for medium to heavy steel turning; the T9225 grade provides toughness for interrupted cuts and variable engagement conditions. Is the CNMG090402 compatible with standard CNMG holders? Yes—being an ISO‑standard rhombic insert, compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness; the insert is designed for standard CNMG toolholders. How does the T9225 grade affect tool life and process stability? The T9225 CVD‑coated grade balances wear resistance and toughness, which enhances tool life under moderate to heavy cutting conditions and improves process stability during interrupted machining. What advantages does the central hole offer? The cylindrical central hole improves clamping repeatability and seat stability, reducing micro‑movement and contributing to consistent surface finish and tool life. Can this insert be used for finishing operations? Yes; with appropriate feeds and speeds the insert and its chipbreaker can produce consistent finishes, while the grade supports longer tool life in mixed roughing and semi‑finishing tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AH120 Wendeplatten - Tungaloy
Combine the PVD-coated carbide AH120 with the 0.4 mm corner radius and ISO CNMG geometry for consistent chip control and reliable process security; order the CNMG090404 AH120 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG090404 AH120 Tungaloy turning insert — PVD-coated carbide, 0.4 mm radius The CNMG090404 AH120 Tungaloy insert is an ISO-compliant rhombic turning insert designed for external and internal turning where a sharp cutting edge and high process reliability are required. PVD-coated carbide grade AH120 0.4 mm corner radius for accurate profiles Rhombic CNMG shape, 80° cutting geometry Consistent cutting performance for stable production The combination of a PVD-coated carbide grade and the CNMG geometry delivers stable wear behaviour and reduced risk of chipping during standard turning tasks. The coated hardmetal layer of the AH120 grade is optimised for wear and fracture resistance, which supports longer tool life and fewer interruptions. The ISO-standard form ensures predictable seating in compatible holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and plate thickness, and the insert is intended to be used together with a suitable external holder, shim/clamp set and replacement screws. Accurate profiles and dependable surface quality A 0.4 mm corner radius produces precise contouring and improved surface finish while balancing cutting forces; for fine finishing or light profiling, this radius provides the necessary geometry without sacrificing edge stability. The insert’s double-sided chipbreaker contributes to consistent chip formation across a range of feeds and depths, easing chip evacuation and protecting the cutting edge. The cylindrical mounting hole and a plate thickness of 4.76 mm increase rigidity at the cutting point, which reduces vibration and helps achieve repeatable dimensional accuracy. Practical integration and application advice The insert is suitable for general turning applications and can be applied to both external and internal operations when combined with the correct holder and workpiece setup. Selection of the chipbreaker and grade should match the workpiece material, machining type and setup stability—choosing the AH120 grade and a matching chipbreaker will be advantageous when both a sharp edge and process security are required. For situations with variable workpiece materials or limited clamping stiffness, preference for a slightly lighter cutting engagement and closely matched holder geometry will improve performance and extend service intervals. For tailored recommendations and fast availability of Tungaloy turning inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert advice and order support Technical Data Article number: 6750461 Manufacturer SKU: TUN6750461 Label: CNMG090404 AH120 Tungaloy insert Model series: ISO turning inserts Material: carbide Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Cutting angle: 80° Clearance (relief) angle: 0° Size: 09 Mounting: cylindrical hole Special features PVD-coated carbide (AH120) Double-sided chipbreaker Rhombic CNMG shape ISO-compliant turning insert Suitable for external and internal turning Sharp cutting edge with high process security Compatible with appropriate holders, shims and clamps FAQ What work does this insert suit best? The CNMG090404 AH120 Tungaloy insert is intended for external and internal turning where a sharp cutting edge and reliable process control are required. Which materials can be machined with this grade? The AH120 PVD-coated carbide grade is designed for broad application and provides good wear and fracture resistance for a wide range of steels and alloyed materials when correctly matched with the chipbreaker and cutting parameters. How is the insert mounted? The insert uses a cylindrical mounting hole; secure seating with the corresponding external holder, shim/clamp set and replacement screws is required for stable operation. How does the 0.4 mm corner radius affect finishing? A 0.4 mm radius offers a balance between edge strength and surface finish, enabling accurate profiles while maintaining sufficient edge stability for many turning tasks. Is the insert indexable or single-use? This CNMG geometry is double-sided and indexable; both sides can be used until the cutting edges reach their wear limit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH120 Wendeplatten - Tungaloy
Benefit from a wear-resistant, PVD-coated AH120 grade and a double-sided chipbreaker that ensure reliable chip control and extended tool life; the rhombic CNMG090404 geometry with a 0° clearance angle offers secure clamping and consistent turning performance. Order the CNMG090404 AH120 Tungaloy insert directly via Metav Werkzeuge or contact the technical consultants for application support. CNMG090404 AH120 — ISO turning insert (CNMG) by Tungaloy A CNMG090404 AH120 indexable insert for turning, designed for ISO-standard holders and optimised for situations requiring a sharp cutting edge and high process security. PVD-coated AH120 carbide grade Double-sided chipbreaker for chip control Rhombic CNMG 09 geometry, 80° approach 4.76 mm thickness with cylindrical hole Consistent cutting performance through optimised grade and geometry The combination of a PVD-coated surface and a wear-resistant carbide substrate provides a stable cutting edge that resists flank wear and micro-chipping. The grade emphasises process security, maintaining dimensional stability across extended runs. The rhombic shape and the double-sided chipbreaker contribute to controlled chip formation, which reduces the likelihood of built-up edge and improves surface finish. These factors result in fewer tool changes and better machine utilisation during turning operations. Secure clamping and easy integration with ISO holders The insert’s CNMG geometry and the presence of a cylindrical hole enable reliable locating and secure fastening in compatible external holders or boring bars. The 0° clearance specification and a plate thickness of 4.76 mm increase rigidity at the cutting zone, aiding vibration damping and repeatable performance. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; maintaining these parameters ensures quick insert changes and predictable machining results. Versatile suitability and straightforward technical advantages Designed for general turning, the insert supports both external and internal turning when paired with the appropriate chipbreaker and grade selection. The PVD coating improves resistance to abrasive wear and heat, making the insert suitable where a sharp edge and good wear resistance are required. Choosing the correct chipbreaker for the workpiece material and machining stability delivers cleaner chips and reduces part rework, translating directly into time savings on the shop floor. Productivity gains and reliable brand performance Using a standardised ISO insert geometry reduces tooling complexity and inventory overhead while enabling fast replacement and minimal setup time. The AH120 grade targets a balance between wear resistance and edge toughness, promoting long tool life and stable metal removal rates. Together, geometry, coating and grade produce predictable results that support consistent cycle times and improved overall equipment effectiveness — a practical advantage for precision turning shops and production environments. For application guidance or to reserve CNMG090404 AH120 inserts from Tungaloy, contact Metav Werkzeuge for tailored recommendations and rapid supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793698 Manufacturer SKU: TUN6793698 Distributor SKU: 6793698-Tungaloy Designation: CNMG090404 AH120 Tungaloy insert Dimensions & core data Size: 09 Corner radius: 0.4 mm Thickness: 4.76 mm Clearance angle: 0° Approach angle: 80° Hole: cylindrical Materials & special features Material: carbide Coating: PVD Grade: AH120 Chipbreaker: double-sided Geometry: rhombic (CNMG) Application: turning Model series: ISO turning inserts System components: insert, suitable outer holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suited for? The CNMG090404 AH120 insert is designed for general turning; the AH120 grade and PVD coating suit applications that require a sharp cutting edge and reliable wear resistance—select the chipbreaker that matches the specific workpiece material and process stability. How does the 0° clearance angle affect machining? A 0° clearance angle increases edge support and rigidity at the cutting zone, helping to reduce vibration and enabling stable cutting when the insert is clamped in a compatible ISO holder. Can this insert be used in both external and internal turning? Yes; the CNMG geometry and double-sided chipbreaker permit use in external and internal turning when paired with an appropriate holder and correct cutting parameters. What are the advantages of the PVD coating on this insert? The PVD coating improves resistance to abrasive wear and heat, extending tool life and maintaining a sharper edge under sustained production conditions. Which SKU corresponds to this Tungaloy insert? The Tungaloy manufacturer SKU is TUN6793698 and the distributor SKU is 6793698-Tungaloy for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated carbide grade AH6225 and a 0.4 mm corner radius, the insert delivers a sharp, stable cutting edge for medium turning of stainless steels while maintaining good tool life. Order the genuine insert directly via Metav Werkzeuge or request application advice from our consultants. CNMG090404 AH6225 ISO turning insert for Drehen by Tungaloy The CNMG090404 AH6225 is an ISO-standard rhombic turning insert designed for reliable external and internal turning of stainless steels, featuring a PVD-coated carbide grade and a double-sided chipbreaker. PVD-coated carbide grade AH6225 Optimised for stainless steels machining 0.4 mm corner radius for versatility ISO CNMG 090404 with cylindrical hole Efficient turning performance for stainless steels The CNMG090404 AH6225 combines a PVD coating with a robust carbide substrate to provide a sharp, stable cutting edge that performs well under variable conditions. The AH6225 grade is engineered for medium cutting and general-purpose stainless steel workpieces, offering a balance between wear resistance and edge stability. This results in improved process reliability and fewer tool changes during batch production, which supports higher productivity and reduced downtime. Compatibility and quick tool changes for workshop efficiency As an ISO-standard insert, compatibility with holders is determined by form, relief angle, tolerance class, fastening, size and thickness; the rhombic shape and cylindrical hole support secure clamping in standard CNMG seats. The double-sided chipbreaker makes the insert indexable, effectively doubling usable edges and simplifying inventory. The nominal 0° relief and standard geometry mean straightforward replacement in common turning holders, enabling fast tool changes and consistent cutting performance across setups. Durability, geometry and practical application advice The 0.4 mm corner radius provides a versatile cutting profile suitable for both finishing and light roughing, while the 4.76 mm thickness and 80° wedge angle contribute to mechanical strength and vibration resistance. The PVD layer enhances high wear resistance, extending effective life when machining stainless steels, provided cutting parameters and coolant strategy are adapted to the workpiece and stability. Typical uses include external and internal turning; select the chipbreaker and grade AH6225 to match workpiece hardness and machine rigidity. For tailored cutting data and option selection, Metav Werkzeuge can provide practical recommendations to optimise cycle time and surface finish. Contact Metav Werkzeuge for tailored cutting data and to arrange supply of genuine Tungaloy CNMG090404 AH6225 turning inserts through Metav Werkzeuge. Article details Article number: 6946669 SKU: 6946669-Tungaloy Manufacturer SKU: TUN6946669 Model series: ISO turning insert series Designation: CNMG090404 AH6225 Tungaloy insert Core specifications Size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Wedge angle: 80° Relief angle: 0° Hole: with cylindrical hole Insert shape: rhombic Chipbreaker: double-sided Materials & features Material: carbide (Hartmetall) Coating: PVD Grade: AH6225 Application: turning (external and internal) Suitable for: stainless steels ISO-conform insert Compatible with appropriate holders and clamping systems Designed for medium machining and variable conditions FAQ What materials is this insert best suited for? The CNMG090404 AH6225 Tungaloy insert is formulated for stainless steels; the AH6225 grade and PVD coating deliver a balance of edge stability and wear resistance for such materials. Can this insert be used for internal turning operations? Yes, the CNMG090404 AH6225 is suitable for both external and internal turning; geometry and chipbreaker selection should match workpiece access and rigidity requirements. Which dimensions are most relevant for selecting the correct holder? Key dimensions are the size (09), thickness (4.76 mm), corner radius (0.4 mm) and the wedge angle (80°); the cylindrical hole and rhombic form determine the compatible clamping type. How does the double-sided chipbreaker benefit workshop logistics? A double-sided chipbreaker enables indexing of multiple edges, reducing inventory needs and enabling quicker edge changes to maintain consistent cutting performance with the CNMG090404 AH6225. Is the AH6225 grade suitable for varying machining conditions? The AH6225 grade is designed as a universal choice for stainless steels and performs well under changing conditions, providing a compromise between sharpness and durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of the PVD‑coated AH6225 carbide grade, the ISO CNMG090404 geometry and a sharp yet stable cutting edge for reliable stainless‑steel turning — order the CNMG090404 AH6225 Tungaloy insert directly via Metav Werkzeuge or request tailored advice from our consultants. CNMG090404 AH6225 Tungaloy indexable turning insert — ISO 090404 for turning The CNMG090404 AH6225 Tungaloy insert is an ISO‑standard indexable turning insert engineered for external and internal turning of stainless steels, offering a sharp, stable cutting edge and a double‑sided chipbreaker for versatile machining. PVD-coated AH6225 carbide grade ISO CNMG090404 rhombic insert geometry Optimised for stainless steel turning Double-sided chipbreaker, cylindrical hole Consistent geometry and a grade optimised for stainless steel The combination of ISO CNMG090404 geometry and the AH6225 PVD‑coated carbide provides predictable cutting behaviour under varying conditions. The rhombic form and the specified 0° clearance ensure steady contact with the workpiece, reducing chatter and supporting reproducible surface finish. For production environments where process stability matters, this geometry helps maintain cycle times and lowers the need for constant readjustment, so tool changes and setups become more efficient. Reliable chip control and edge stability for mid‑range turning A double‑sided chipbreaker and a cutting edge designed for a balance of sharpness and robustness enable consistent chip formation when machining stainless steel. The PVD coating enhances wear resistance and thermal stability during intermittent cuts, which is especially useful in mixed‑batch production or where cutting parameters vary. This leads to fewer unexpected tool failures and a more economical use of tool stock, improving overall shopfloor productivity. Practical compatibility and handling to simplify tooling decisions The insert is ISO‑standard and intended for use with matching CNMG holders; compatibility depends on form, relief angle, tolerance class, clamping and thickness. The insert features a cylindrical hole for secure fixing and a 0.4 mm corner radius, making it suitable for general external and internal turning tasks where a balance of edge strength and profile definition is required. Selecting a holder and clamping kit that match the ISO form will ensure correct seat contact and repeatable clamping torque, reducing assembly time and the risk of misalignment. Economic and operational benefits for workshop use Using a universal grade such as AH6225 simplifies inventory by covering a broad range of stainless‑steel applications at medium machining parameters. The PVD‑coated carbide provides enhanced tool life in many turning operations, reducing the frequency of insert changes and downtime. For workshops aiming for steady productivity and manageable stock levels, the combination of standardised form, reliable coating and a robust chipbreaking solution supports both planned series production and flexible small‑batch work. Contact Metav Werkzeuge for detailed application advice on the Tungaloy CNMG090404 AH6225 insert; technical consultation and order support are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6903156 Manufacturer SKU: TUN6903156 Label: CNMG090404 AH6225 Tungaloy‑Wendeplatte Facts Insert size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 80° Special features Grade: AH6225 (PVD‑coated carbide) Geometry: CNMG rhombic, ISO 090404 Hole: cylindrical, with hole Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The CNMG090404 AH6225 insert from Tungaloy is optimised for stainless steel machining and performs reliably in medium‑range turning operations. Is the insert reversible and how many cutting edges are available? The indexable design is double‑sided, providing multiple usable edges per insert and economical utilisation of the carbide blank. Which holders are compatible with this ISO form? Compatibility requires a matching CNMG‑type holder that corresponds to ISO 090404 in form, relief angle, clamping and thickness to ensure correct seating and clamping. What is the corner radius and how does it affect finishing? The insert has a 0.4 mm corner radius, which balances edge strength with the ability to produce defined contours and acceptable surface finish in general turning. Can this grade handle changing cutting conditions? Yes; the AH6225 PVD‑coated grade is designed for stable edge life under varying conditions, offering robustness alongside a sharp cutting profile. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of a sharp, stable cutting edge and PVD-coated carbide grade AH6225 for reliable turning of stainless steels, supported by an 80° rhombic geometry and a 0.4 mm corner radius for consistent surface quality. Order through Metav Werkzeuge or consult their specialists for application-specific recommendations. CNMG090404 AH6225 indexable turning insert — PVD-coated carbide, 80° rhombic (Tungaloy) CNMG090404 AH6225 is a PVD-coated indexable turning insert designed for external and internal turning; compatibility is governed by ISO form, clearance, tolerance class, clamping and thickness PVD-coated carbide AH6225 Sharp yet stable cutting edge Double-sided chipbreaker Rhombic 80° geometry, with hole Optimised process stability and consistent cutting performance The PVD-coated carbide grade AH6225 delivers a balance between edge sharpness and robustness that is particularly suited to machining stainless steels under variable conditions. The combination of a defined corner radius (0.4 mm) and a stable cutting edge reduces built-up edge formation and improves surface finish in medium-duty turning. This results in fewer interruptions for insert changes and a more predictable cycle time, which supports higher throughput and lower overall process costs. Simple integration into ISO holder systems for secure clamping Designed to the ISO indexable insert standard, the rhombic form and 80° approach angle ensure easy matching to common external holders and boring bars. The presence of a cylindrical hole facilitates positive location and secure clamping, while the insert thickness of 4.76 mm contributes to bending stiffness in interrupted cuts. Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters preserves tool life and ensures repeatable positioning. Chip control and versatile application in stainless steel turning The double-sided chipbreaker geometry offers controlled chip formation for the machining strategies typical in turning operations, aiding evacuation and reducing the risk of entanglement. As a universal grade for stainless steels, the design supports both external and internal turning tasks with an emphasis on repeatable performance and surface quality. The indexable format allows rapid turning of inserts to a fresh edge, maintaining productivity in batch and continuous production environments. Contact Metav Werkzeuge for tailored recommendations on tooling setups and to reserve stock of the Tungaloy CNMG090404 AH6225 insert; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6946692 Manufacturer SKU: TUN6946692 SKU: 6946692-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG090404 AH6225 Material: Carbide (Hartmetall) Grade/coating: AH6225, PVD-coated Core specifications Corner radius: 0.4 mm Thickness: 4.76 mm Insert size: 09 Clearance angle: 0° Geometry angle: 80° Hole: with cylindrical hole Special features Rhombic insert form Double-sided chipbreaker ISO-normed indexable insert Universal grade for stainless steels Application: external and internal turning FAQ Is this insert suitable for machining stainless steels? Yes. The CNMG090404 AH6225 Tungaloy indexable turning insert (SKU TUN6946692) is formulated as a universal grade for stainless steels and is optimised for stable cutting and good surface quality. Which holder parameters determine compatibility with the insert? Compatibility is determined by holder form, clearance angle, tolerance class, clamping method, size and thickness; matching these ensures secure seating and repeatable performance with the CNMG090404 AH6225. Can indexable inserts like this be reground? Indexable inserts are designed for economical replacement rather than regrinding; the CNMG090404 AH6225 is intended to be rotated or replaced to restore cutting performance. What chip control does the insert provide? The double-sided chipbreaker on this insert promotes controlled chip formation and evacuation, supporting safer machining and more consistent surface finishes in turning operations. Is the insert suitable for both external and internal turning? Yes; the geometry and hole-mounted design make the CNMG090404 AH6225 suitable for both external and internal turning applications, provided the correct holder and cutting parameters are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of economical performance, a stable cutting edge and straightforward indexability for consistent turning results; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNMG 090404 AH6225 turning insert by Tungaloy — PVD-coated carbide, rhombic 80° shape CNMG 090404 AH6225 is an ISO‑standard turning insert designed for general-purpose external and internal turning where a sharp, yet robust cutting edge is required ISO CNMG 090404 format PVD-coated carbide AH6225 for rostfreier Stahl Rhombic 80° geometry with cylindrical hole Double-sided chipbreaker for cost efficiency High-process reliability with an optimised cutting grade The insert combines a PVD-coated carbide substrate with the AH6225 grade, engineered as a universal solution for machining rostfreier Stahl under varying conditions. The coating improves wear resistance while the substrate maintains edge stability during medium cutting depths; this results in fewer interruptions and more predictable tool life. As part of an ISO series, the geometry is standardised so selection is based on holder compatibility and intended operation rather than bespoke tooling, which simplifies procurement and planning in production environments. Designed for secure clamping and repeatable indexability The rhombic CNMG form with a cylindrical hole and a plate thickness of 4.76 mm ensures reliable seating in compatible external holders or boring bars. The insert is double-sided, providing two usable cutting edges per index, which lowers cost per edge and reduces downtime for edge changes. Compatibility is determined by form, 0° relief angle, tolerance class, fastening and plate size; matching these parameters guarantees correct contact, repeatable clamping force and consistent cutting geometry across tool changes. Practical productivity advantages on the shop floor Using a universal grade such as AH6225 delivers a balance between edge sharpness and toughness, suitable for fluctuating cutting conditions common in batch and job shop work. The 0.4 mm corner radius supports a stable chipping behaviour while maintaining surface finish, and the 80° rhombic angle provides good access for external profiling tasks. The PVD coating helps control built-up edge and extend the effective life of the cutting edge, contributing to predictable maintenance intervals and improved overall productivity. Selection guidance and recommended setup Choose the chipbreaker and grade to match the workpiece material, machining type and fixture stability; the included double‑sided chipbreaker is a versatile starting point for general turning. Ensure the clamping set, underlay or screw meets the ISO form and tolerance requirements so that the insert seats without play. For less rigid set-ups or heavy interrupted cuts, select a more robust holder and verify that the insert orientation matches the required lead and clearance angles; correct matching reduces chatter, improves surface integrity and prolongs insert life. Contact Metav Werkzeuge for tailored application advice or to order the CNMG 090404 AH6225 turning insert — telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6903159 Manufacturer SKU: TUN6903159 SKU: 6903159-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 80° Relief angle: 0° Special features PVD-coated carbide (AH6225) Rhombic insert, CNMG format Cylindrical hole for clamping Double-sided chipbreaker ISO‑standard turning insert Application: Drehen (turning) Universal grade optimised for rostfreier Stahl FAQ What materials is this insert suitable for? The CNMG 090404 AH6225 turning insert is specified as a universal grade optimised for rostfreier Stahl and is primarily recommended for machining stainless-type steels under medium cutting conditions. Is the insert indexable and how many cutting edges are available? This indexable CNMG insert is double-sided, providing two usable cutting edges; each edge is identical when indexed and clamped correctly. Which dimensions and geometry should be matched in the holder? Holder compatibility depends on form, relief angle (0°), tolerance class, fastening method, size (09) and plate thickness (4.76 mm); matching these parameters ensures correct seating and secure clamping. What advantages does the PVD coating provide? The PVD coating on the AH6225 grade increases wear resistance and helps control built‑up edge during turning, supporting longer edge life and more consistent surface quality. What are the identification details for ordering? Order using Article number 6903159 or SKU 6903159-Tungaloy; the manufacturer SKU is TUN6903159 and the model is CNMG 090404 AH6225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Combine sharp, stable cutting performance with wide material coverage and simple mounting for consistent turning results; order the CNMG090404 AH6225 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG090404 AH6225 CNMG turning insert for Drehen — Tungaloy, PVD-coated carbide, rhombic shape The CNMG090404 AH6225 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a sharp yet robust cutting edge optimised for rostfreier Stahl. PVD-coated carbide grade AH6225 Universal for rostfreier Stahl machining Rhombic CNMG with 0.4 mm corner radius Double-sided chipbreaker, cylindrical hole Reliable cutting performance for rostfreier Stahl and mixed conditions The insert delivers a balance of sharpness and edge stability thanks to the PVD-coated carbide grade AH6225, which is formulated for medium-depth turning under varying conditions. This combination reduces the need for frequent tool changes and supports more consistent cycle times, improving process reliability. The engineered cutting edge produces predictable chip formation, making the system suitable for a broad range of rostfreier Stahl components where surface finish and repeatability matter. ISO compatibility and secure mounting for predictable results Designed to ISO dimensions, the rhombic CNMG geometry and the cylindrical hole ensure straightforward compatibility with standard holders and boring bars. Correct selection of holder form, clearance angle, tolerance class and clamping set determines seating precision; when paired correctly, the system reduces vibration and runout, supporting dimensional accuracy. The insert’s double-sided design also allows indexable usage, extending effective tool life and lowering tooling costs per part. Material and coating explained for non-specialists The substrate is a fine-grain carbide and the surface receives a PVD coating that increases wear resistance while preserving a sharp cutting edge. In practical terms, this means improved edge life when machining rostfreier Stahl and fewer interruptions for dressing or replacement. The 0° clearance and the 0.4 mm corner radius contribute to a smooth transition between passes and help protect the edge during interrupted cuts or variable feed conditions. Operational benefits and application guidance Using this insert in a stable setup yields tangible benefits: reduced spindle idle time, more predictable tool-change intervals and reproducible surface quality. For external and internal turning, choose feeds and cutting speeds tailored to the grade AH6225 and the specific rostfreier Stahl alloy; this maximises chip control provided by the double-sided chipbreaker. If process stability is limited, prioritise a rigid clamping arrangement and conservative cutting parameters to exploit the insert’s robust edge behaviour. For application advice or to order CNMG090404 AH6225 inserts from Tungaloy, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for direct support and fast delivery. Technical Data Manufacturer article number: 6966078 Manufacturer SKU: TUN6966078 Marketplace SKU: 6966078-Tungaloy ISO designation: CNMG090404 Brand: Tungaloy Facts Insert shape: CNMG (rhombic) Corner radius: 0.4 mm Clearance angle: 0° Included hole: with cylindrical hole Plate thickness: 4.76 mm Insert size: 09 Approach angle: 80° Special features Material: carbide Coating: PVD-coated (AH6225) Chipbreaker: double-sided Application: Drehen (external and internal turning) Compatibility: ISO-standard turning systems Designed for: rostfreier Stahl machining FAQ What materials is this insert best suited for? The CNMG090404 AH6225 insert is designed primarily for machining rostfreier Stahl and performs well across a broad range of stainless alloys when cutting parameters are adapted. How does the AH6225 coating help in production? The PVD-coated AH6225 grade on the CNMG090404 improves wear resistance and maintains a sharp edge, extending tool life and supporting consistent surface finish during medium-depth turning. Can the insert be indexed, and how many cutting edges are available? This rhombic CNMG insert is double-sided and indexable, allowing multiple cutting edges to be used before disposal, which reduces tooling costs per edge. What holder features are important for optimal performance? Holder form, tolerance class, correct clamping set and rigid mounting are essential for the CNMG090404 to minimise runout and vibration, ensuring precise cutting and chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated carbide in the proven CNMG geometry delivers a sharp yet stable cutting edge for medium turning of stainless steel; the rhombic ISO form with a cylindrical hole and 0° clearance simplifies secure clamping. Order the CNMG090404 AH6225 Tungaloy insert directly via Metav Werkzeuge or request consultation from our technical advisors. CNMG090404 AH6225 indexable insert for turning — Tungaloy, PVD-coated carbide, rhombic 80° The CNMG090404 AH6225 is an ISO-standard indexable insert designed for external and internal turning, optimised for stainless steel and for medium-duty operations where a balanced compromise between edge sharpness and stability is required. CNMG090404 format, rhombic size 09 PVD-coated carbide grade AH6225 Optimised for stainless steel machining Double-sided chipbreaker, cylindrical hole Reliable cutting performance for stainless steel machining The AH6225 grade combines a PVD finish with a wear-resistant carbide substrate to provide a sharp and stable cutting edge for turning applications. This composition supports consistent cutting behaviour when machining stainless steel, reducing the need for frequent edge changes during varied production runs. For operators less familiar with coatings: PVD (physical vapour deposition) creates a thin, hard layer that improves wear resistance and helps maintain edge geometry under thermal and mechanical stress, which translates into steadier component tolerances and fewer scrap parts. Secure seating and repeatable tool engagement Compatibility with standard toolholders is determined by the insert’s geometry and dimensions; the rhombic ISO-standard shape, cylindrical hole and a 4.76 mm thickness ensure dependable clamping. The plate’s 80° main cutting angle and 0° clearance contribute to a predictable cutting contact that is particularly useful in set-ups with limited rigidity. The modest 0.4 mm corner radius helps to balance edge strength and surface finish. Clear identification of these parameters simplifies holder selection and reduces set-up time, improving process repeatability and lowering the risk of vibration-related tool wear. Operational economy through doubled edges and controlled chips A double-sided chipbreaker and two usable cutting edges per face mean the insert offers an economical cost-per-edge compared with single-sided alternatives. The optimised chip geometry promotes stable chip formation, easing evacuation and reducing incidental tool interference, which in turn supports longer uninterrupted cycles and improved surface quality. Careful pairing of chipbreaker style and the AH6225 grade with machine stability and cutting data yields tangible gains in overall productivity and fewer unscheduled tool changes, contributing to lower production costs over time. For availability, technical guidance or to secure stock of this Tungaloy AH6225 grade insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, application-focused advice. Technical Data Article number: 6946783 SKU: 6946783-Tungaloy Manufacturer SKU: TUN6946783 Model series: ISO-Drehwendeschneidplatten Label: CNMG090404 AH6225 Tungaloy-Wendeplatte Facts Thickness: 4.76 mm Corner radius: 0.4 mm Main cutting angle: 80° Clearance: 0° Size: 09 Special features Material: PVD-coated carbide Grade/coating: AH6225 Plate form: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: Turning ISO designation: CNMG090404 Compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CNMG090404 AH6225 insert is designed primarily for stainless steel; the AH6225 grade and PVD coating give robust performance across a range of alloyed steels commonly found in stainless-steel turning. How does the insert secure to the holder? The rhombic form with a cylindrical hole and ISO-standard geometry provides a repeatable seating and clamping mechanism; compatibility is defined by holder form, tolerance class and the insert’s dimensions. Is the insert reversible to use multiple cutting edges? Yes, the double-sided chipbreaker design offers multiple usable edges per index, which extends service intervals and improves cost efficiency. Which features contribute to surface finish and tool life? The combination of the AH6225 grade, PVD coating and a modest corner radius supports a stable cutting edge, while the chipbreaker promotes controlled chips—together these factors enhance surface finish and extend effective tool life. Can this insert be used for internal turning as well as external turning? The ISO-standard CNMG geometry is suitable for both external and many internal turning tasks, provided the holder and overhang meet the necessary rigidity and clearance requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge, a PVD-coated AH6225 grade, and ISO compatibility for reliable turning results; order the inserts via Metav Werkzeuge or consult our technicians for matching holders and process parameters. CNMG090404 AH6225 Tungaloy turning insert — PVD-coated carbide, 0.4 mm nose radius, 80° rhombic A CNMG090404 AH6225 Tungaloy turning insert designed for external and internal turning of stainless steels, offering a balance of sharpness and edge stability for medium machining. PVD-coated carbide AH6225 Designed for stainless steels 0.4 mm nose radius for fine finishes 80° rhombic insert with central hole Double-sided chipbreaker, reusable Higher productivity through a balanced cutting concept The PVD-coated AH6225 grade is developed for consistent performance on stainless steels, combining a sharp cutting edge with sufficient edge strength for varying conditions. The PVD-coated surface reduces adhesion and improves wear resistance, which in practical terms means longer in-process life and fewer tool changes. For shops running mixed batches or changing setups frequently, this insert offers measurable gains in uptime and process stability without sacrificing surface quality. Secure system fit and straightforward handling for production environments As an ISO-standard insert, compatibility with holders depends on form, relief angle and tolerance class; the rhombic geometry with an 80° included angle and a central hole supports stable clamping and exact seating in standard toolholders. The plate has a thickness of 4.76 mm and uses a 0° relief angle, which affects how the insert engages the workpiece and how cuts are supported. Clear specification of these parameters simplifies tool selection and reduces setup time on lathes and bar-feed machines. Better chip control and extended edge life for cost-effective turning The double-sided chipbreaker provides controlled chip formation in a range of cutting conditions, improving coolant access and reducing rework caused by poor chip evacuation. The combination of carbide substrate and PVD finish helps maintain a stable cutting edge during medium-duty turning, resulting in a consistent surface finish and predictable tool-change intervals. This reliability supports planning for tool inventories and contributes to a lower cost per component over production runs. Practical applications and selection guidance for machinists Intended for turning operations, this insert suits both external and internal machining where stainless steels are predominant. The 0.4 mm nose radius favours fine finishing and dimensional control on turned parts; for roughing or heavier cuts, a different radius or an alternative chipbreaker should be chosen. When matching to a holder, verify form, thickness and fastening method to ensure correct seating. For additional application data or recommendations on holder pairing, technicians at Metav Werkzeuge can provide tailored support. Contact Metav Werkzeuge for tailored application advice or to request matching holder recommendations for the Tungaloy CNMG090404 AH6225 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903168 SKU: 6903168-Tungaloy Manufacturer SKU: TUN6903168 Manufacturer: Tungaloy Model series: ISO turning inserts Grade: AH6225 Material: Carbide ISO designation: CNMG090404 Type: Turning insert Facts Included angle: 80° Nose radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Size: 09 ISO code: 090404 Special features Rhombic plate form Central cylindrical hole Double-sided chipbreaker PVD-coated carbide grade Suited for turning of stainless steels Reusable indexable geometry FAQ What materials is this insert suitable for? This insert is supplied in the AH6225 grade and is optimised for machining stainless steels, offering a balance between sharpness and wear resistance. How does the PVD coating affect performance? The PVD-coated carbide combination increases wear resistance and reduces adhesion, which improves tool life and maintains cutting performance for the CNMG090404 AH6225 turning insert. Can the insert be used for internal and external turning? Yes, the insert geometry and mounting via the central hole allow both external and internal turning applications when paired with an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of a proven combination of PVD-coated cemented carbide AH6225, an 80° rhombic CNMG form and a 0.4 mm nose radius for reliable mid-range machining of stainless steel; order the CNMG090404 AH6225 insert directly via Metav Werkzeuge or contact our consultants for tailored advice. CNMG090404 AH6225 CNMG indexable turning insert for Drehen by Tungaloy — PVD-coated carbide, 0.4 mm radius The CNMG090404 AH6225 is an ISO rhombic indexable turning insert designed for external and internal turning, optimised for machining stainless steel with a sharp yet stable cutting edge. ISO rhombic CNMG 80° geometry PVD-coated cemented carbide AH6225 0.4 mm nose radius for accurate profiling Double-sided chipbreaker with cylindrical hole Consistent cutting performance and prolonged tool life The insert combines a PVD-coated surface with a robust cemented carbide core in grade AH6225, delivering a balanced mix of edge sharpness and stability that supports medium machining operations. The coating reduces built-up edge and improves wear resistance under variable conditions, which translates into more predictable tool life and fewer unscheduled indexings. For manufacturers seeking reduced cycle-time variation, the combination of grade and geometry contributes to reliable part quality and repeatable results when tackling stainless steel. Interchangeability and secure clamping in ISO tool systems Compatibility with standard holders is governed by insert form, relief angle, tolerance class, fastening and thickness; this ISO-normed CNMG insert fits common CNMG-compatible external holders and boring bars when these parameters match. The design includes a cylindrical hole for positive location and stable clamping, which simplifies tool setting and reduces run-out risk. As a result, workshop setups become more consistent, changeover times decrease and process stability improves, supporting higher first-pass yield in small- to medium-batch production. Application advantages for efficient stainless steel turning With an 80° geometry and a 0.4 mm nose radius, the insert offers a robust cutting profile that resists chipping while allowing precise contouring. The double-sided chipbreaker enables two effective cutting edges per index, increasing economic life per insert and lowering tooling costs. This insert is especially suitable for diverse turning tasks — from finishing to light roughing — where stainless steel is involved and where stable chip control and surface finish matter. For complex material mixes or special machining strategies, further technical guidance is available from Metav Werkzeuge to match chipbreaker and cutting data to the workpiece. Contact Metav Werkzeuge for precise tooling recommendations on the Tungaloy CNMG090404 AH6225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and cutting data Technical Data Manufacturer article number: 6966096 Manufacturer SKU: TUN6966096 SKU: 6966096-Tungaloy Designation: CNMG090404 AH6225 Tungaloy insert Numbers / Core technical data Insert size: 09 Thickness: 4.76 mm Geometry angle: 80° Relief angle: 0° Nose radius: 0.4 mm Special features PVD-coated cemented carbide (AH6225) ISO-indexable turning insert (CNMG) Rhombic shape, double-sided chipbreaker Cylindrical hole for secure clamping Suited for machining stainless steel Typical use: external and internal turning FAQ Which materials is this insert suited for? The CNMG090404 AH6225 insert from Tungaloy is optimised for stainless steel; its grade and coating offer good edge stability and wear resistance for a broad range of stainless steel turning tasks. How is compatibility with toolholders ensured? Compatibility depends on the ISO CNMG form, relief angle, tolerance class, fastening method, size and thickness; a matching CNMG-compatible holder or boring bar is required for correct clamping of the CNMG090404 AH6225. What benefits does the AH6225 grade provide? AH6225 is a PVD-coated cemented carbide grade designed to provide a sharp yet stable cutting edge at medium cutting conditions, improving surface finish and process reliability when machining stainless steel. Can this insert be used for both external and internal turning? Yes, the CNMG090404 AH6225 is suitable for both external and internal turning applications when mounted in the appropriate CNMG-compatible holder. What does the 0.4 mm nose radius influence? A 0.4 mm nose radius balances edge strength and profile accuracy, offering improved surface finish over larger radii while maintaining sufficient robustness for mid-range cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of precise geometry and a wear-resistant PVD coating to maintain production consistency and reduce tool changes; the combination of an 80° rhombic design and a double-sided chipbreaker supports stable chip control and reliable performance for rostfreier Stahl turning. Order the insert via Metav Werkzeuge or consult our specialists for application-specific advice. CNMG090404 AH6225 — ISO-indexable turning insert for turning (Tungaloy) The CNMG090404 AH6225 is an ISO-indexable turning insert designed for external and internal turning operations, delivering a sharp yet resilient cutting edge for medium machining of rostfreier Stahl and similar materials. PVD-coated carbide grade AH6225 Rhombic 80° geometry with cylindrical hole Double-sided chipbreaker for stable chips Corner radius 0.4 mm, 4.76 mm thickness Enhanced process stability through geometry and grade The rhombic 80° geometry combined with a 0.4 mm corner radius delivers consistent engagement and predictable cutting forces, which is especially beneficial for medium steel-turning applications. The PVD-coated carbide composition of the grade provides improved wear resistance under variable cutting conditions, so the tool maintains edge integrity over longer periods. These characteristics translate into fewer interruptions for regrinding or replacement and steadier machining results in series production. Reliable chip control and predictable tool life A double-sided chipbreaker supports controlled chip formation across a range of feeds and depths, reducing the risk of entanglement and stabilising surface finish. The coating system on this grade is optimised to protect the substrate while preserving a sharp cutting edge, enabling efficient metal removal without sacrificing edge stability. For operations on rostfreier Stahl, the combination of chip control and edge protection helps avoid work hardening and minimises the need for secondary finishing—an efficiency gain for busy workshops. Simple integration with ISO tooling systems Designed as an ISO-standard insert, the component fits holders compatible with form, relief angle, tolerance class, fastening, size and thickness criteria; the cylindrical hole allows secure clamping and straightforward indexing. The insert’s 4.76 mm thickness and rhombic shape suit a wide range of external and internal turning holders. Clear dimensional standards reduce setup time and support rapid replacement during tool changes, contributing to reduced machine downtime and easier inventory management. Efficiency and quality benefits for everyday production By combining a wear-resistant coating with a geometry aimed at stability, this insert balances cutting performance and service life to deliver measurable cost benefits over time. The design is particularly suited to medium-duty turning where surface finish and repeatability are priorities. Choosing this grade supports consistent part quality while keeping maintenance predictable—helpful for scheduling and process planning in production environments. Discuss your application with Metav Werkzeuge and request the Tungaloy CNMG090404 AH6225 insert for optimised rostfreier Stahl turning; technical advice and order assistance are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6946679 Manufacturer: Tungaloy Manufacturer SKU: TUN6946679 SKU: 6946679-Tungaloy Facts Thickness: 4.76 mm Corner radius: 0.4 mm Insert size: 09 Cutting angle: 80° Relief angle: 0° Special features PVD-coated carbide grade AH6225 Double-sided chipbreaker Rhombic geometry Cylindrical hole for clamping ISO-indexable turning insert Suitable for external and internal turning FAQ What materials is this insert best suited for? The AH6225 grade insert is formulated for machining rostfreier Stahl and performs well in medium turning operations where a sharp, stable cutting edge is required. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker design, which promotes consistent chip formation across typical feeds and depths for turning. Is this insert compatible with standard ISO holders? Yes, the CNMG090404 conforms to ISO indexable insert dimensions and secures via a cylindrical hole; compatibility depends on holder form, clearance angle and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6235 Wendeplatten - Tungaloy
Combining the PVD-coated AH6235 grade with a 0.4 mm corner radius and a double-sided chipbreaker delivers stable chip formation and reliable performance in stainless-steel turning; order the insert directly via Metav Werkzeuge or request advice from our consultants for optimal grade and holder matching. CNMG090404 AH6235 ISO turning insert for external and internal turning — Tungaloy A CNMG090404 AH6235 ISO-standard indexable insert designed for robust external and internal turning, optimised for stainless steel and interrupted cuts. PVD-coated carbide AH6235 grade Optimised for stainless steel and interrupted cuts Double-sided chipbreaker for stable chip control 0.4 mm corner radius, rhombic CNMG form High-process stability for stainless-steel turning The insert is engineered to support consistent results when machining stainless steel under challenging conditions. The PVD-coated carbide substrate of the AH6235 grade offers a balance of toughness and wear resistance, making it suitable for interrupted cuts and applications with increased risk of chipping. By combining a robust substrate with a tailored coating, the geometry maintains edge integrity over longer cycles, which reduces unplanned tool changes and contributes to a steadier production flow. The rhombic CNMG form with a 0.4 mm corner radius helps distribute cutting forces and supports repeatable dimensional accuracy. Predictable chip control and extended service life A clearly defined double-sided chipbreaker on this indexable insert promotes uniform chip formation and evacuation, which is particularly beneficial in variable feed and depth conditions. The 0° clearance angle and the CNMG090404 geometry ensure compatibility with a broad range of ISO holders; secure clamping is supported by the cylindrical hole design. These features together reduce the incidence of built-up edge and edge breakout, delivering smoother surface finishes and fewer rejects. The combination of chip control and the AH6235 grade leads to a measurable improvement in machining uptime and tool-life stability. Easy integration into ISO tool systems and efficient inventory management Being an ISO-standard insert simplifies selection of a matching external holder or boring bar: form, clearance, tolerance class, fixing method, size and thickness are the determining factors for compatibility. The plate’s 4.76 mm thickness, CNMG rhombic form and standard designation streamline stock-keeping and replacement procedures. For workshops running mixed materials, the insert’s versatility in handling interrupted cuts alongside stainless steels reduces the need for multiple specialised grades, supporting more economical tooling strategies and faster tool-change routines. For precise guidance on integrating the Tungaloy AH6235 CNMG090404 insert into specific turning operations, contact Metav Werkzeuge for technical consultation and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6903349 Manufacturer SKU: TUN6903349 Our SKU: 6903349-Tungaloy Model series: ISO indexable turning inserts Core dimensions Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 09 Lead/approach angle: 80° Relief (clearance) angle: 0° Features & materials Carbide substrate, PVD-coated (AH6235) Double-sided chipbreaker Rhombic plate form (CNMG) Cylindrical hole for secure clamping ISO-standard designation CNMG090404 Suitable for stainless steel and interrupted cuts FAQ What materials is this insert suitable for? The CNMG090404 AH6235 Tungaloy insert is particularly suitable for stainless steel and for operations with interrupted cuts, thanks to the tough PVD-coated carbide grade. How does the AH6235 grade affect performance? AH6235 provides a balance of toughness and wear resistance; with the CNMG geometry it improves edge stability and reduces the risk of chipping in demanding turning tasks. Is the plate compatible with standard CNMG holders? Yes, the ISO designation and the rhombic CNMG form ensure compatibility with matching ISO external holders and boring bars when the holder matches form, size and clamping specifications. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker on this insert promotes consistent chip formation and evacuation, which supports better surface quality and fewer interruptions in production. Which dimensions are critical when selecting a replacement? Key dimensions to match are the plate size (09), corner radius (0.4 mm), thickness (4.76 mm) and the CNMG form; confirming these ensures secure clamping and correct cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 carbide for heat-resistant alloys, the 0.4 mm corner radius for precise edge control and the ISO rhombic format for broad holder compatibility — all designed to maintain production stability and predictable tool life. Order the CNMG090404 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090404 AH8015 — ISO rhombic turning insert by Tungaloy for turning applications The CNMG090404 AH8015 Tungaloy insert is an ISO-standard rhombic turning insert with PVD-coated carbide, engineered for reliable performance in the machining of heat-resistant alloys and general turning tasks. PVD-coated carbide grade AH8015 ISO rhombic CNMG 09 format 0.4 mm corner radius for precision Double-sided chipbreaker, through-hole fix Consistent performance on heat-resistant alloys and mixed production The PVD-coated AH8015 grade combines wear resistance with edge stability, making it well suited for the machining of heat-resistant alloys and other demanding materials. The coating promotes a controlled microgeometry at the cutting edge, which reduces adhesion and thermal softening during extended cycles. Such properties translate into fewer unplanned tool changes, a steadier surface finish and more predictable tool life — factors that improve throughput and help meet production targets without compromising component quality. Easy integration into ISO tooling systems for productivity gains Designed to the ISO CNMG form, this rhombic insert benefits from full compatibility with standard external and internal turning holders when the holder’s form, clearance angle, tolerance class, clamping method, size and thickness match. The double-sided chipbreaker extends the usable edge life, while the through-hole (cylindrical hole) enables secure clamping and straightforward indexing. These design choices support efficient chip control and rapid index changes, which together reduce downtime and simplify tool management in a production environment. Practical edge geometry and handling guidance for reliable results With a 0.4 mm corner radius and a 0° relief angle, the insert delivers a balance between fine finishing and moderate-strength cutting. The small radius assists in producing consistent surface quality on small to medium depth cuts, while the reputable grade helps maintain edge integrity under intermittent higher thermal loads. For best results, match the chipbreaker style and grade selection to workpiece stability and feed/speed strategy; adequate clamping and correct holder geometry are essential to exploit the insert’s full benefits in both roughing and finishing cycles. Contact Metav Werkzeuge for tailored application advice and to secure the Tungaloy AH8015 CNMG090404 insert for your production needs Technical data Article number: 6946671 Manufacturer SKU: TUN6946671 Our SKU: 6946671-Tungaloy Model series: ISO turning inserts Core specifications Designation: CNMG090404 Grade/sort: AH8015 Insert size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Hole style: cylindrical through-hole Included angle: 80° Materials & features Material: carbide (PVD-coated) Application: turning (external and internal) Chipbreaker: double-sided Cutting edge stability and wear resistance ISO-compatible rhombic insert Compatibility: suitable holders and clamping sets FAQ What materials is this insert optimised for? The CNMG090404 AH8015 insert is optimised for heat-resistant alloys and general turning applications; the AH8015 grade provides balanced wear resistance and edge stability. Can this insert be used for both external and internal turning? Yes, the ISO rhombic format and through-hole clamping make the insert suitable for both external and internal turning when paired with the correct holder geometry. How does the 0.4 mm corner radius affect the machining result? A 0.4 mm corner radius provides a compromise between surface finish and edge strength, improving finish on lighter cuts while still tolerating moderate cutting forces. What does the 0° clearance angle require from the toolholder? A 0° clearance angle requires a holder designed to provide the correct relief and support; correct holder selection ensures stable cutting and prevents premature edge chipping. Is the grade AH8015 suited to high-temperature cutting? The PVD-coated AH8015 grade is specified for heat-resistant alloys and offers thermal stability and wear resistance suitable for higher temperature applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Benefit from a robust combination of precise geometry and a wear-resistant carbide grade: the PVD-coated AH8015 offers a balanced mix of edge stability and wear resistance for efficient turning of heat-resistant alloys, while the CNMG rhombic form and 0.4 mm corner radius support reliable dimensional control. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. CNMG 090404 AH8015 turning insert by Tungaloy — PVD-coated carbide, rhombic 09 The CNMG090404 AH8015 is an ISO indexable turning insert designed for general turning of heat-resistant alloys and for a wide range of external and internal turning operations. PVD-coated AH8015 carbide grade Rhombic 09 geometry, CNMG form 0.4 mm corner radius for controlled cutting Double-sided insert with cylindrical hole Boosted productivity with a balanced carbide grade The insert’s PVD-coated carbide substrate in grade AH8015 is engineered for a compromise between wear resistance and cutting-edge stability, making it a practical first choice for machining heat-resistant alloys. The protective coating reduces adhesive wear and helps preserve the cutting edge at elevated temperatures, which translates into longer effective tool life and fewer indexings. In production settings this balance lowers downtime and improves process stability, supporting a predictable rate of component output and reduced tooling costs per part. Precise geometry for consistent turning performance Manufactured to the ISO indexable insert standard 090404, the rhombic CNMG shape with an included angle of 80° delivers a dependable cutting profile for both facing and turning. The 0° clearance and a 0.4 mm corner radius provide a defined contact condition that improves part finish and repeatability when paired with a suitable toolholder. The insert is double-sided and features a cylindrical hole for secure clamping; its 4.76 mm thickness contributes to rigidity under typical cutting parameters. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness — matching these parameters ensures correct seating and clamping force for safe, repeatable turning. Practical system advantages and recommended use As an ISO-format indexable solution, the insert is intended to be used with an appropriate external holder or boring bar, together with a shim/retention set and replacement fastening screws; this system approach simplifies insert changes and supports consistent tool positioning. Selection of a suitable chipbreaker and the AH8015 grade should be aligned with the workpiece material, machining type and machine/tooling rigidity to achieve optimal chip control and surface quality. The economical nature of an indexable, double-sided insert means that component production can be scaled without frequent, time-consuming tool regrinds — a tangible efficiency gain for jobbing and series production alike. For application guidance or to order the CNMG 090404 AH8015 by Tungaloy, contact Metav Werkzeuge for tailored recommendations and direct procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6946821 Manufacturer SKU: TUN6946821 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Thickness: 4.76 mm Size: 09 Included angle: 80° Clearance angle: 0° Special features Grade/coating: AH8015, PVD-coated carbide Shape: Rhombic, CNMG Double-sided insert Cylindrical hole ISO designation: 090404 Application: Turning FAQ What materials is this insert best suited for? The PVD-coated AH8015 grade is optimised for machining heat-resistant alloys and offers a versatile balance of wear resistance and edge stability for general turning applications. How does the CNMG geometry affect holder selection? The CNMG rhombic form, 80° included angle and 0° clearance require a matching ISO-compatible holder whose form, tolerance class and fastening correspond to the insert’s dimensions for secure clamping and accurate positioning. Is the insert reversible and how many cutting edges are available? The insert is double-sided, providing two usable cutting edges per side depending on indexability and correct orientation in the compatible holder; this improves economy compared with single-edge solutions. Which chipbreaker should be chosen for reliable chip control? The chipbreaker must be selected according to the workpiece material, machining type and machine/fixture rigidity; pairing the AH8015 grade with an appropriate double-sided chipbreaker yields improved chip formation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of balanced wear resistance and PVD-coated carbide for consistent, productive turning of heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. CNMG090404 AH8015 Turning indexable insert by Tungaloy, PVD-coated carbide A CNMG090404 AH8015 indexable insert designed for external and internal turning, optimised for machining heat-resistant alloys with reliable chip control and stable cutting-edge performance PVD-coated carbide grade AH8015 Suitable for heat-resistant alloys Double-sided chipbreaker geometry Rhombic CNMG shape, 0.4 mm corner radius Productivity through optimised grade and coating The PVD-coated AH8015 grade combines wear resistance with cutting-edge stability to extend tool life during continuous turning operations. This composition is especially suited to high-temperature alloys where flank wear and edge chipping are common; the result is fewer tool changes and more consistent cycle times. The PVD-coated surface reduces built-up edge and improves surface finish, converting material properties into measurable gains in throughput and repeatability. System compatibility and safe clamping Designed to the ISO series for indexable inserts, the geometry and dimensions ensure straightforward integration into standard external holders and boring bars. Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert features a 0° clearance, a cylindrical clamping hole and a plate thickness of 4.76 mm, enabling secure fastening and predictable seating. Choosing the correct holder and clamping hardware translates directly into process stability and predictable part quality. Application-oriented geometry for reliable chip control The rhombic CNMG form with an 80° cutting orientation and a 0.4 mm corner radius provides versatility across finishing and semi-finishing tasks. The double-sided chipbreaker geometry supports efficient chip formation when machining demanding alloys, reducing recutting and heat concentration at the cutting edge. The insert’s central cylindrical hole simplifies clamping while its double-sided design allows economical index changes, contributing to a lower cost per edge and uninterrupted production. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to request the CNMG090404 AH8015 with matching holders; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966097 SKU: 6966097-Tungaloy Manufacturer SKU: TUN6966097 Brand: Tungaloy Key measurements ISO designation: CNMG090404 ISO code: 090404 Insert size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 80° Double-sided: yes Materials & special features Material: carbide Grade/coating: AH8015 (PVD-coated) Chipbreaker: double-sided Hole style: cylindrical hole Plate form: rhombic Model series: ISO turning indexable inserts Typical application: external and internal turning of heat-resistant alloys FAQ What materials is this insert best suited for? The CNMG090404 AH8015 insert by Tungaloy is optimised for machining heat-resistant alloys; the AH8015 grade balances wear resistance and edge stability to perform well on high-temperature materials. How does the insert clamp in standard holders? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s cylindrical hole and standard CNMG geometry allow secure clamping in compatible ISO holders and boring bars. Can the insert be used for both external and internal turning? Yes, the rhombic CNMG shape and chipbreaker design make it suitable for both external turning and internal boring when the correct holder and cutting parameters are applied. What benefits does the PVD coating provide? The PVD coating on the AH8015 grade reduces built-up edge, improves surface finish, and enhances wear resistance, which leads to longer edge life and more consistent production results. Is the insert reversible or indexable? This is a double-sided indexable insert; both sides can be used, allowing economical edge changes and reduced tooling costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Reliable turning performance achieved through the PVD-coated AH8015 grade and ISO‑standard geometry combines wear resistance with stable cutting edges; the double-sided CNMG090404 design with a 0.4 mm corner radius supports efficient external and internal turning. Order the CNMG090404 AH8015 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG090404 AH8015 Turning insert (PVD-coated, double-sided) by Tungaloy A CNMG090404 AH8015 ISO rhombic insert for turning, engineered for reliable machining of heat‑resistant alloys in external and internal turning operations ISO‑standard rhombic insert CNMG PVD‑coated carbide AH8015 Double‑sided with 0.4 mm radius Cylindrical hole, compatible holders Consistent chip control and predictable tool life The PVD‑coated AH8015 grade offers a balance between wear resistance and edge stability, making it well suited to the machining of heat‑resistant alloys. The coating reduces flank wear and improves high‑temperature performance, which extends component life and reduces unexpected downtime. In practical terms, this means fewer insert changes per shift and a more consistent surface finish when turning demanding materials. Fast integration into ISO toolsets Designed to the ISO‑standard CNMG geometry, the insert fits a wide range of external holders and boring bars once the form, relief angle, tolerance class, clamping method, size and thickness are matched. Compatibility is determined by these parameters rather than brand names; selecting a matching holder and correct clamp ensures repeatable seating and safe torque transmission. For workshop planning, this facilitates rapid tool changeover and reduces setup time. Stable cutting geometry for reliable results The rhombic shape with an 80° included angle, 0° relief angle and 0.4 mm corner radius provides a robust profile for general turning. The double‑sided configuration doubles the available cutting edges per insert, improving cost efficiency under stable cutting conditions. Stability in the cutting zone reduces vibration and produces consistent dimensional accuracy on both external profiles and internal bores. Clear application focus and efficiency gains Intended primarily for turning, the insert performs in both external and internal operations when paired with an appropriate chipbreaker and grade for the workpiece and cutting conditions. Choosing the matching chipbreaker and the AH8015 grade yields optimised chip formation and surface quality for heat‑resistant alloys. The predictable behaviour of the grade supports planning for tool consumption and production output, contributing to improved overall process reliability. For high process reliability with Tungaloy AH8015 inserts, contact Metav Werkzeuge for tailored selection and fast supply: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6946705 Manufacturer SKU: TUN6946705 SKU: 6946705-Tungaloy Designation: CNMG090404 AH8015 Model series: ISO turning inserts Facts Corner radius: 0.4 mm Relief angle: 0° Insert size: 09 Thickness: 4.76 mm Included hole: cylindrical Included angle: 80° Special features Material: carbide Coating: PVD Grade: AH8015 Double‑sided chipbreaker Rhombic CNMG form With cylindrical hole Application: turning (external & internal) ISO‑standard compatibility FAQ What materials is this insert suitable for? This CNMG090404 AH8015 Tungaloy insert is intended as a first choice for the general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How does the AH8015 grade improve tool life? The PVD coating and the AH8015 carbide composition on the CNMG090404 insert reduce high‑temperature flank wear and help maintain a stable cutting edge, which together extend usable tool life. Which holder features must be checked for compatibility? Compatibility requires matching form, relief angle, tolerance class, clamping method, size and thickness; using a holder designed for CNMG inserts ensures secure seating and repeatable performance with this Tungaloy insert (SKU 6946705‑Tungaloy). Can the insert be used for both external and internal turning? Yes; the rhombic CNMG geometry, double‑sided design and 0.4 mm corner radius allow the insert to be used for both external profiles and internal bores when the correct chipbreaker and holder are selected. How many cutting edges are available per insert and what is the benefit? The double‑sided CNMG090404 design provides multiple cutting edges per insert, effectively improving cost efficiency under consistent machining conditions and reducing tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide grade AH8015, ISO CNMG090404 geometry and a 0.4 mm corner radius for efficient, reliable turning of heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. CNMG 090404 AH8015 turning insert by Tungaloy — PVD‑coated carbide, 0.4 mm radius A CNMG 090404 AH8015 indexable turning insert designed for general turning of heat‑resistant alloys, compatible with ISO‑standard holders and intended for both external and internal turning operations ISO CNMG090404 geometry, rhombic shape PVD‑coated carbide grade AH8015 0.4 mm corner radius for consistent finishes Double‑sided chipbreaker, cylindrical hole Proven wear resistance for heat‑resistant alloys The PVD‑coated carbide grade AH8015 provides a balanced combination of wear resistance and cutting‑edge stability, making it a reliable choice for the general machining of heat‑resistant alloys. This grade is engineered to maintain edge integrity under elevated cutting temperatures, which helps to extend tool life and reduce unplanned tool changes. The result is a more predictable machining window and improved process efficiency in serial production. Consistent chip control and secure clamping A double‑sided chipbreaker and a cylindrical hole ensure repeatable chip formation and stable engagement with clamping systems. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; consequently, the insert is intended for use with ISO‑standard external holders, shims and fixing screws. Stable chip evacuation and firm clamping together reduce machining interruptions and contribute to steady cycle times. Geometry tailored for surface quality and flexibility The insert’s 80° rhombic form and 0.4 mm corner radius provide a compromise between robustness and fine surface finish, while the 0° clearance supports close control of the cut on light to moderate depths. A plate thickness of 4.76 mm and the rhombic outline permit reliable orientation in common CNMG pockets, offering versatility across finishing and light‑to‑medium roughing tasks. The geometry therefore supports consistent component quality with fewer secondary operations. Practical benefits for production environments Specified as a first choice for general turning of high‑temperature alloys, the design offers both operational stability and ease of integration into existing tool systems. Fewer tool changes and improved edge life translate into lower downtime and steadier output, enhancing overall productivity. When combined with correctly matched holders and cutting data, the insert supports cost‑effective machining and repeatable part quality across batches. For application advice or to secure supply of the Tungaloy CNMG090404 AH8015 turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: 6750463 Manufacturer SKU: TUN6750463 SKU: 6750463-Tungaloy Model series: ISO turning inserts Material: carbide Facts ISO designation: CNMG090404 Insert size: 09 Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 80° Special features Grade: AH8015 (PVD‑coated) Double‑sided chipbreaker Rhombic plate form Cylindrical hole (with hole) Intended use: turning (external and internal) System components: ISO insert, matching external holder, shim/clamping set, replacement screws FAQ Which materials are suitable for this insert? The CNMG090404 AH8015 insert by Tungaloy is specified for the general machining of heat‑resistant alloys and is balanced between wear resistance and edge stability for such materials. Is the insert compatible with standard ISO holders? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening and thickness; the CNMG090404 geometry is made for ISO‑standard external holders and appropriate clamping kits. Can the insert be used for both finishing and light roughing? Yes, the 0.4 mm corner radius and 80° rhombic form permit use across finishing and light‑to‑medium roughing operations when paired with suitable cutting data. Is the insert reversible and how many cutting edges are available? The CNMG090404 AH8015 is double‑sided with a chipbreaker on both sides, providing multiple usable cutting edges per insert and cost‑efficient indexable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com