CNMG 120416 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade tailored for stainless steels, a robust 80° rhombic geometry with a 1.6 mm corner radius, and a double-sided chipbreaker for consistent medium‑duty turning. Order the CNMG120416 AH6225 indexable turning insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG120416 AH6225 indexable turning insert for turning — Tungaloy CNMG120416 AH6225 is a standard ISO indexable turning insert designed for external and internal turning applications where a balance of sharpness and cutting edge stability is required ISO rhombic 80° geometry PVD-coated cemented carbide AH6225 1.6 mm corner radius for robust edges Double-sided chipbreaker with cylindrical hole Reliable performance for stainless steel machining The CNMG120416 AH6225 insert combines a PVD-coated cemented carbide substrate with a universal grade developed specifically for stainless steels, delivering a sharp yet durable cutting edge during medium machining operations. This balance reduces the frequency of tool changes and supports steady cycle times in small- to medium-batch production. The 80° rhombic shape provides stable cutting forces and good accessibility for external and internal profiles, while the 1.6 mm corner radius helps maintain edge strength under interrupted cuts. Such design choices translate into predictable tool behaviour and improved process stability on conventional and CNC turning centres. Improved chip control and edge life for consistent results A double-sided chipbreaker matched to the universal AH6225 grade promotes effective chip formation across varying cutting conditions, which reduces the risk of built-up edge and improves surface finish. The PVD coating enhances wear resistance at the cutting edge and contributes to a longer effective tool life, especially when machining work‑hardening stainless alloys. Where thermal and mechanical conditions change during a shift, this insert maintains a reliable cutting geometry, lowering scrap rates and supporting repeatable part quality — a practical advantage for manufacturers aiming for consistent throughput. System compatibility and straightforward handling The insert conforms to ISO standards; compatibility with a holder depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. The plate is double-sided and supplied with a cylindrical hole for secure clamping, enabling economical indexation and simple rotation for renewed cutting edges. Using standard ISO holders and the correct seat and clamp components ensures secure fixation and repeatable positioning. For workshops requiring quick tool changes, this indexable solution minimises downtime and simplifies inventory by using a universally recognisable insert shape and size. For application advice, holder compatibility checks or to arrange supply of CNMG120416 AH6225 inserts from Tungaloy, contact Metav Werkzeuge for tailored recommendations and prompt delivery support. Technical data Article number: 6946869 Manufacturer SKU: TUN6946869 Label: CNMG120416 AH6225 Tungaloy-Wendeplatte SKU: 6946869-Tungaloy Core dimensions Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Thickness: 4.76 mm Size designation: 12 Design & features Material: cemented carbide Coating: PVD Insert form: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert intended for? The CNMG120416 AH6225 insert is formulated as a universal grade for stainless steels, offering a good compromise between sharpness and edge stability for medium machining. Can the insert be rotated or indexed to a second edge? Yes, the plate is double-sided and designed for economical indexation to expose a fresh cutting edge, extending usable life per insert. Which insert geometry does CNMG120416 use and why does it matter? The insert features an 80° rhombic geometry, providing robust cutting force distribution and improved access for external and internal turning tasks. How does the PVD coating benefit production? The PVD coating increases wear resistance at the cutting edge, reducing flank wear and improving tool life under variable cutting conditions. Is this insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; matching the CNMG120416 dimensions to a corresponding ISO holder ensures correct fit and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, stable cutting edge and PVD-enhanced wear resistance for dependable medium turning on stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance and availability. CNMG120416 AH6225 Tungaloy turning insert — ISO rhombic, PVD-coated carbide for turning A CNMG120416 AH6225 Tungaloy turning insert for ISO-based external and internal turning, optimised for medium machining of stainless steels. PVD-coated carbide grade AH6225 Double-sided with chipbreaker ISO CNMG 120416, 80° rhombic shape Consistent cutting performance for stainless steels The AH6225 grade is a PVD-coated carbide designed as a universal solution for stainless steels, offering a balanced mix of a sharp and stable cutting edge under variable conditions. With this formulation, tool life and consistent surface finish are promoted in medium turning operations, while the coating improves wear resistance and reduces edge chipping. The insert supports applications where repeatable performance and predictable tool change intervals contribute to lower overall machining costs. Seamless integration with ISO tooling systems Delivered in the ISO CNMG 120416 format, the insert is compatible with standard rhombic holders when form, clearance angle, tolerance class, fastening, size and thickness match. The 80° geometry and rhombic shape ensure secure clamping and stable engagement for both external and internal turning. The insert’s double-sided design and cylindrical locating hole permit economical use of each cutting edge and straightforward replacement, supporting efficient tool management within an ISO-conforming tooling system. Reliable chip control and process stability A double-sided chipbreaker tailored to medium machining helps to direct and break chips consistently, enhancing process safety and surface integrity. The corner radius 1.6 mm produces a robust tool profile for general turning tasks, while the specified 0° clearance angle corresponds to neutral geometry that supports a balance between cutting force and edge stability. Together, these features promote steady metal removal rates and predictable machining behaviour, particularly when conditions vary during production runs. Contact Metav Werkzeuge for detailed application advice and current stock information on the Tungaloy CNMG120416 AH6225 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for consulting and ordering support Technical data Article number: 6903167 Manufacturer SKU: TUN6903167 SKU: 6903167-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Coating: PVD Dimensions & angles Insert size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Geometry angle: 80° Features & applications Rhombic indexable insert (CNMG) Double-sided, cylindrical hole PVD-coated carbide grade AH6225 Suitable for external and internal turning Optimised for stainless steels in medium machining ISO-compatible system FAQ Which materials is this insert optimised for? The CNMG120416 AH6225 Tungaloy turning insert is optimised primarily for stainless steels, offering a balance of sharpness and edge stability suitable for medium turning operations. Is the insert reversible and economical to use? Yes, the insert is double-sided with a cylindrical hole for secure locating; both sides are usable, which improves cost-efficiency per edge for the indexable plate. What are the key geometry and dimensional specifications? The insert follows ISO CNMG 120416 with an 80° rhombic geometry, 12 mm size, 4.76 mm thickness and a corner radius of 1.6 mm, providing a versatile profile for general turning tasks. How is compatibility with holders determined? Compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and correct seating in the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a universal, PVD‑coated cemented carbide grade and a compact rhombic form for reliable medium turning operations; order the insert directly via Metav Werkzeuge or consult our experts for tailored holder compatibility advice. CNMG 120416 AH6225 – Turning indexable insert by Tungaloy CNMG 120416 AH6225 is an ISO‑standard rhombic turning insert designed for medium machining tasks and universal use with rostfreie Stähle. PVD‑coated carbide grade AH6225 80° rhombic insert with 1.6 mm corner radius Double-sided chipbreaker, cylindrical hole ISO‑standard CNMG120416 for turning Consistent cutting performance for medium turning The CNMG120416 AH6225 indexable insert combines a PVD coating with a wear‑resistant cemented carbide substrate to provide consistent edge strength under changing conditions. The AH6225 grade is formulated as a universal option for rostfreie Stähle, offering a balance between sharpness and robustness; this means reliable engagement when switching between interrupted cuts and continuous finishes. Using a universal grade reduces tool changeovers and simplifies stock management, so production runs remain steady and predictable. Precision geometry that improves process stability A defined 80° rhombic form with a 1.6 mm corner radius ensures predictable tool behaviour and contributes to dimensional stability on external and internal turning. The insert’s geometry, combined with the double-sided chipbreaker, promotes controlled chip formation and helps maintain a consistent surface quality. Where surface finish is critical, the combination of stable edge geometry and the PVD layer reduces the risk of built‑up edge and fluctuation in part tolerances, supporting higher first‑pass yields and less rework. Seamless integration with ISO holders and clamping systems Compatibility with toolholders is determined by form, clearance angle, tolerance class, attachment method, size and thickness; the CNMG format follows ISO conventions to ease selection of matching external holders or boring bars. The presence of a cylindrical hole and standard thickness simplifies secure clamping and repeatable seating, reducing setup time. Choosing inserts that match holder specifications minimises vibration and improves tool life, making the workflow more efficient and less prone to stoppages. Practical advantages for mixed‑material shops For workshops processing a range of rostfreie Stähle and mixed batches, this insert delivers predictable wear behaviour and straightforward grade assignment. The reversible, double‑sided design doubles effective cutting edge life per insert and contributes to lower tooling cost per component. In short production runs or mixed production environments, the universal nature of the grade and the chip control features support quick changeovers and steady productivity without sacrificing surface integrity. Contact Metav Werkzeuge today for a bespoke recommendation on Tungaloy AH6225 inserts and holder matching; Metav Werkzeuge can provide technical guidance and order processing for CNMG 120416 AH6225 (SKU 6946906-Tungaloy) via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6946906 SKU: 6946906-Tungaloy Manufacturer item number: TUN6946906 Model series: ISO-Drehwendeschneidplatten Core data Corner radius: 1.6 mm Insert angle: 80° Thickness: 4.76 mm Size: 12 mm Hole style: cylindrical hole Special features Material: cemented carbide, PVD‑coated Grade: AH6225, universal for rostfreie Stähle Shape: rhombic, CNMG form Chipbreaker: double-sided Mounting: with hole, compatible with ISO holders FAQ What materials is this insert intended for? The CNMG 120416 AH6225 turning insert by Tungaloy is specified as a universal grade for rostfreie Stähle and performs well in medium turning operations across varied stainless steel compositions. Is the insert reversible and how does that affect economy? Yes, the CNMG format is double‑sided; using both edges of the indexable insert effectively doubles the number of available cutting edges and reduces tooling cost per part. How is holder compatibility ensured for this ISO insert? Compatibility is ensured by matching the CNMG form, clearance/freiwinkel, tolerance class, attachment and plate thickness to the holder; the ISO designation CNMG120416 aids straightforward selection of the correct external holder or boring bar. Does the PVD coating improve wear resistance on rostfreie Stähle? The PVD coating on the cemented carbide substrate enhances abrasion resistance and helps maintain a sharper cutting edge under the thermal and adhesive conditions typical of rostfreie Stähle. Which SKU and article number should be quoted when ordering? Quote SKU 6946906-Tungaloy or article number 6946906 when ordering the CNMG 120416 AH6225 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6225 grade for a sharp yet stable cutting edge and the ISO CNMG geometry for reliable turning performance; order via Metav Werkzeuge or consult the specialists for holder compatibility and optimal chipbreaker selection. CNMG 120416 AH6225 ISO turning insert — PVD-coated carbide, 80° (Tungaloy) CNMG120416 AH6225 is an ISO-standard rhombic insert designed for general external and internal turning of stainless steels and similar alloys ISO CNMG 120416 geometry, 80° lead angle PVD-coated carbide AH6225 for stainless steel Double-sided chipbreaker for stable cutting Rhombic insert with cylindrical hole High-performance grade for variable stainless-steel turning The CNMG120416 AH6225 insert combines a PVD-coated carbide substrate with a grade developed for stainless steels, delivering a balance between a sharp cutting edge and a robust edge line under varying cutting conditions. The AH6225 grade is tuned for medium-depth turning, offering consistent tool life where conditions change between interrupted cuts and continuous machining. As an ISO-standard turning insert, it simplifies inventory and replacement planning while maintaining predictable performance in production environments. Geometry and mechanical advantages for secure, repeatable machining The rhombic CNMG shape with an 80° corner angle provides a versatile approach angle suited to both external and internal turning. The insert is double-sided, which extends effective life per index and reduces tooling costs. A corner radius of 1.6 mm and a thickness of 4.76 mm contribute to edge strength and vibration resistance; the cylindrical hole ensures positive, repeatable seating in compatible holders. For best results, compatibility with a chosen holder should be checked by matching form, clearance angle, tolerance class, fastening method, size and thickness. Chip control and productivity in everyday production A dedicated chipbreaker on both rake faces supports controlled chip formation and evacuation, reducing the risk of entanglement and improving surface finish. This stability in chip flow translates into fewer interruptions and higher productive uptime. When combined with a suitable holder, shim and clamping set, the system enables efficient changeover and minimal set-up time in medium-production turning tasks. Selecting the appropriate chipbreaker and grade for the specific workpiece material and cutting parameters is crucial to maximise economy and surface quality. Understandable technical choices for workshop planners The insert’s PVD coating forms a thin, hard surface layer that increases wear resistance and maintains edge integrity during elevated cutting temperatures. A 0° clearance specification at the insert’s relief face affects contact conditions and should be considered when matching a holder to avoid rubbing or unintended contact. For users less familiar with insert selection: choose the chipbreaker and grade according to the workpiece material and the intended depth of cut; confirm holder compatibility by checking form, clearance angle, tolerance, fastening and thickness. Metav Werkzeuge can advise on correct holder and screw combinations. For reliable stainless-steel turning with Tungaloy’s AH6225 grade, contact Metav Werkzeuge for tailored advice and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796305 SKU: 6796305-Tungaloy Manufacturer SKU: TUN6796305 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Geometry: CNMG 120416 Corner radius: 1.6 mm Thickness: 4.76 mm Angle: 80° Size: 12 Special features Coating/type: PVD-coated carbide (AH6225) Chipbreaker: double-sided Plate shape: rhombic Hole: with cylindrical hole Clearance angle: 0° Application: turning (external and internal) FAQ What materials is this insert suited for? The CNMG120416 AH6225 insert is formulated for stainless steels and similar alloys; the PVD-coated carbide provides wear resistance and stability in medium turning operations. How does the corner radius affect machining? A 1.6 mm corner radius increases edge strength and reduces vibration, making the insert suitable for stable roughing and medium finishing where a stronger edge is advantageous. Is this insert reversible and how many cutting edges are available? The insert is double-sided and indexable; each side provides usable edges consistent with the CNMG geometry, extending life per insert compared with single-sided alternatives. Which holder features must be checked for compatibility? Compatibility depends on form, clearance angle, tolerance class, fastening type, size and thickness; match these parameters to ensure secure seating and accurate cutting performance. What benefit does the PVD coating provide? The PVD coating adds a hard, wear-resistant layer that improves tool life at elevated temperatures and helps maintain a sharp cutting edge during variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH6235 carbide and a double-sided chipbreaker for improved process security and reliable chip control; the insert’s 1.6 mm nose radius and ISO-conformant geometry enable consistent finishes and stable turning operations. Order the CNMG120416 AH6235 insert directly via Metav Werkzeuge or request application advice from our consultants. CNMG120416 AH6235 — CNMG turning insert, PVD-coated carbide, 1.6 mm by Tungaloy CNMG120416 AH6235 is an ISO-conformant indexable insert designed for external and internal turning, optimised for stainless steels and interrupted cuts PVD-coated carbide grade AH6235 Designed for stainless steel machining Double-sided chipbreaker for consistent chips 1.6 mm nose radius for stable finishes Greater process reliability for stainless steel turning The PVD-coated AH6235 grade is engineered for tougher applications and provides a balanced combination of toughness and wear resistance. On materials prone to work-hardening and built-up edge, such as stainless steels, the coating improves thermal resistance and adhesion control, while the carbide substrate delivers the mechanical strength required under interrupted cutting conditions. This results in superior chip control, reduced risk of edge breakout and fewer unplanned tool changes — a clear benefit for production environments where cycle time and consistent part quality are critical. Geometry and edge preparation for repeatable surface quality The insert’s 1.6 mm nose radius and rhombic CNMG geometry deliver a robust cutting edge capable of producing repeatable surface finishes with controlled cutting forces. The geometry, combined with the double-sided chipbreaker, allows two usable edges per index, improving tool utilisation and lowering tooling cost per part. The 80° approach angle and the ISO designation ensure predictable cutting behaviour and straightforward integration into standard turning holders, supporting accurate, repeatable results in both roughing and finishing passes. System compatibility that reduces setup complexity Compatibility with toolholders is determined by form, clearance, tolerance class, attachment, size and thickness; the ISO-Drehwendeschneidplatten system concept streamlines selection across inserts, external holders and clamping sets. The insert’s cylindrical hole and standard thickness simplify mounting and spare-part management, while the model-series approach supports consistent inventory and faster changeovers. By viewing the insert as part of a system — insert, holder, underlay/clamping set and replacement screws — shops achieve better process stability and fewer dimension-related errors during setup. Operational efficiency and measurable savings Using a grade tailored to the material and an effective chipbreaker leads to longer tool life and fewer interruptions for regrinding or replacement, which improves overall machine uptime. For production-focused shops, the result is higher productivity and a lower cost per component thanks to improved edge life and predictable performance. The combination of PVD-coated surface treatment and robust carbide core supports demanding stainless-steel applications while reducing scrap and rework — delivering tangible economic benefits over conventional grades. Contact Metav Werkzeuge for tailored advice on integrating the CNMG120416 AH6235 insert into production; our consultants can confirm holder compatibility and optimise cutting parameters for specific materials and machines. Email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical requirements. Technical Data Article number: 6903359 SKU: 6903359-Tungaloy Manufacturer: Tungaloy Core data Nose radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 12 mm Approach angle: 80° Clearance angle: 0° Special features ISO-Drehwendeschneidplatten model series ISO designation: CNMG120416 Grade/sort: AH6235 (PVD-coated carbide) Double-sided chipbreaker Rhombic plate form with cylindrical hole Application: Turning; suited to interrupted cuts and stainless steels FAQ Is this insert suitable for machining stainless steel? Yes. The CNMG120416 AH6235 insert uses a PVD-coated carbide grade optimised for stainless steels, offering improved thermal resistance and chip control for such materials. Can the insert be used for both external and internal turning? Yes. The CNMG120416 geometry and ISO conformity make the insert suitable for external and internal turning when mounted in the appropriate holder. What does the AH6235 grade offer compared with standard grades? The AH6235 grade provides increased toughness and a PVD surface that enhances wear resistance and reduces the risk of edge breakout in interrupted cuts. How is the insert fixed to the holder? The insert features a cylindrical hole for standard clamping; compatibility depends on holder form, tolerance class, attachment method, size and thickness. How many cutting edges are available per insert? The rhombic CNMG shape with a double-sided chipbreaker provides multiple usable edges, improving tool economy and lowering cost per cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade AH6235 insert with an 80° rhombic geometry and a 1.6 mm corner radius for robust turning performance; the combination offers reliable chip control in interrupted cuts and stable machining of stainless steel—order or consult Metav Werkzeuge for application advice. CNMG 120416 AH6235 — ISO turning indexable insert by Tungaloy, 80° rhombic, 1.6 mm radius CNMG120416 AH6235 is an ISO-standard rhombic indexable insert designed for turning applications, optimised for stainless steel and interrupted cutting where reduced chipping risk and secure edge life are important ISO-standard CNMG geometry, 80° included angle PVD-coated carbide grade AH6235 for durability Double-sided chipbreaker for controlled chips Cylindrical hole for secure mounting Reliable cutting performance for stainless steel turning The insert delivers consistent results when machining stainless steel due to its PVD coating and carbide substrate, which together improve wear resistance and reduce built-up edge. The AH6235 grade is formulated for tougher, more ductile materials and applications with a higher risk of edge breakout. In practice, this means fewer interruptions for insert changes and a higher probability of predictable tool life, so cycle times remain stable and component quality is maintained. Improved chip control and stability in interrupted cuts Built with a double-sided chipbreaker, the geometry supports efficient chip formation and evacuation, crucial in interrupted or unstable cuts. The 1.6 mm corner radius balances strength and edge engagement: it resists chipping better than a fine radius while still enabling acceptable surface finish. The 80° rhombic geometry contributes to cutting stability and versatile approach angles, making the insert suitable for both external and internal turning tasks where surface integrity and edge security matter. Easy integration and economical use in production Compatibility follows ISO standards: form, clearance angle, tolerance class, fixing method, size and thickness determine holder fitment. The insert’s cylindrical mounting hole and standard dimensions allow straightforward replacement in matched holders or boring bars, reducing setup time. Using a robust grade such as AH6235 can lower overall tooling costs by extending exchange intervals and improving process repeatability—leading to more cost-effective component throughput for routine and demanding turning operations. Choose the Tungaloy CNMG120416 AH6235 insert for demanding stainless steel turning and contact Metav Werkzeuge for selection support or application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6880508 Manufacturer SKU: TUN6880508 SKU: 6880508-Tungaloy Model series: ISO turning indexable inserts Material: carbide Coating / grade: PVD / AH6235 Primary application: turning Numbers / Core technical data Insert designation: CNMG120416 ISO code: 120416 Inscribed circle / size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 80° Relief angle: 0° Designs / Special features Rhombic insert shape Cylindrical hole for secure fastening Double-sided chipbreaker Suited for stainless steel and interrupted cuts FAQ Is this insert suitable for stainless steel machining? Yes. The CNMG120416 AH6235 insert from Tungaloy is specifically formulated with a PVD-coated carbide grade to handle stainless steel and applications with increased breakout risk. Can the insert be used for interrupted cuts and unstable conditions? Yes. The double-sided chipbreaker and the tougher AH6235 grade make the insert appropriate for interrupted cuts and situations demanding improved edge security. What holder compatibility is required for this ISO insert? Compatibility depends on the holder’s form, clearance and tolerance class; the CNMG120416 format follows ISO standards and requires a matching CNMG holder or boring bar with a cylindrical mounting seat. Does the insert have a standard mounting hole? Yes. The design includes a cylindrical hole for reliable fixing with standard clamping hardware. How does the 1.6 mm corner radius affect performance? The 1.6 mm radius increases edge robustness to reduce chipping while maintaining a balance between strength and surface finish for typical turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced wear resistance and edge stability of this PVD-coated carbide grade to maintain steady cycle times and low tooling costs; order via Metav Werkzeuge or request application advice from our consultants. CNMG120416 AH8015 indexable turning insert by Tungaloy CNMG120416 AH8015 is an ISO-format indexable insert for external and internal turning, designed for machining heat-resistant alloys with stable cutting edges. PVD-coated cemented carbide grade AH8015 Designed for heat-resistant alloy machining Rhombic CNMG 80° geometry, 1.6 mm corner radius Double-sided insert with cylindrical hole High productivity through a balanced carbide grade The PVD-coated cemented carbide grade AH8015 delivers a deliberate compromise between wear resistance and edge stability, making it suitable for a wide range of operations on heat-resistant alloys. The coating enhances surface hardness and reduces built-up edge, resulting in more consistent tool life and fewer interruptions for insert changes. For production-focused environments, this combination supports predictable cycle times and reduces overall tooling consumption, improving cost-efficiency per part without sacrificing finish quality. Reliable fit and straightforward integration into ISO systems Based on the ISO CNMG format, the insert ensures compatibility with standard toolholders when the holder’s form, free angle, tolerance class, clamping method, size and thickness match. The rhombic geometry with an 80° included angle and a 0° clearance angle provides a clear definition of where the insert will engage the workpiece, while the cylindrical hole ensures secure clamping and repeatable seating. These attributes simplify inventory management and speed up tool changes in mixed-production settings by relying on established ISO standards. Stable cutting performance and surface quality The double-sided design and 1.6 mm corner radius give strength at the cutting edge, which improves resistance to impact and edge chipping during interrupted cuts or unstable setups. A plate thickness of 4.76 mm contributes to rigidity and dampens vibration, aiding in attaining consistent surface finishes during both external and internal turning. The integrated chipbreaker geometry supports manageable chip formation on materials that tend to produce stringy or serrated chips, lowering the risk of workpiece damage and enhancing operator safety. Application guidance for process optimisation Select the double-sided chipbreaker and the grade AH8015 when machining heat-resistant alloys under medium to high cutting parameters or when stability is moderate to good. For less rigid setups, reduce feed or opt for a smaller corner radius to avoid excessive cutting forces. The PVD coating performs particularly well where thermal stability at the edge matters; however, correct holder rigidity and mounting are equally important to achieve repeatable results. If additional process data is required, Metav Werkzeuge provides technical guidance to match insert selection with machine capability and workpiece material. For secure supply and expert application advice on the Tungaloy AH8015 inserts, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and availability Technical data Article number: 6946870 Manufacturer SKU: TUN6946870 SKU: 6946870-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMG120416 AH8015 Tungaloy insert Core specifications Geometry: CNMG (rhombic), 80° included angle Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance (free) angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Materials & special features Substrate: cemented carbide Coating: PVD Grade: AH8015 Typical application: turning (external and internal) ISO-format insert compatible with matching holders FAQ What materials is this insert intended for? This insert in grade AH8015 is intended primarily for machining heat-resistant alloys and other demanding materials where a balance of wear resistance and edge stability is required. Which insert geometry and size does the CNMG120416 describe? CNMG120416 denotes a rhombic CNMG insert with an 80° included angle, a 1.6 mm corner radius and a plate thickness of 4.76 mm, suitable for ISO-compatible holders. Is the insert single- or double-sided and how does that affect use? The insert is double-sided, allowing indexation to the second cutting edge; this extends useful life and reduces replacement frequency under appropriate cutting conditions. What role does the PVD coating play for this insert? The PVD coating increases surface hardness and thermal resistance at the cutting edge, improving wear behaviour and reducing built-up edge during turning of heat-resistant alloys. How should the insert be mounted for best repeatability? For repeatable performance, mount the ISO CNMG insert into a matching holder that fits form, tolerance, clamping style, size and thickness; the cylindrical hole aids secure seating and correct alignment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of balanced wear resistance and cutting-edge stability for reliable turning of heat-resistant alloys; ISO conformity and a rhombic 80° geometry support predictable chip control and tool life. Order the CNMG120416 AH8015 insert directly via Metav Werkzeuge or consult our specialists for selection and clamping advice. CNMG120416 AH8015 CNMG ISO turning insert, 80° rhombic — Tungaloy The CNMG120416 AH8015 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a PVD-coated carbide grade optimised for heat-resistant alloys. ISO rhombic 80° geometry for stable cutting PVD-coated carbide AH8015 for heat-resistant alloys Double-sided chipbreaker with 1.6 mm nose radius Cylindrical hole, 4.76 mm thick for secure clamping Engineered for consistent turning performance The ISO rhombic geometry with an 80° included angle provides a robust seating and predictable cutting forces, which leads to stable machining and reduced vibration in serial production. The 1.6 mm nose radius offers a compromise between edge strength and surface finish, ensuring consistent dimensional accuracy for shafts and bores. Where cycle times and repeatability matter, this configuration reduces set-up variability and supports continuous productivity. Optimised for heat-resistant materials and long tool life The grade AH8015 is a PVD-coated carbide formulated as a first choice for machining heat-resistant alloys; it balances wear resistance and edge stability to withstand thermal and abrasive loading. The coating reduces adhesion and thermal softening on the cutting edge, which means fewer unscheduled insert changes and a steadier surface quality when machining demanding alloys. For operations prioritising uptime, this insert delivers predictable flank wear progression and extended service intervals. Secure clamping and chip control for efficient changeovers Designed with a cylindrical hole and a 4.76 mm plate thickness, the insert seats reliably in standard ISO toolholders, simplifying index changes and minimising downtime during production runs. The double-sided chipbreaker facilitates controlled chip formation across different depths of cut and feeds; this supports safer chip evacuation and reduces the risk of tool or workpiece damage. The ISO designation and standard dimensions make inventory management straightforward in mixed-production environments. Practical selection guidance for workshop integration When selecting an insert for turning, match the chipbreaker type and grade to the workpiece alloy and the machine’s rigidity; the combination of AH8015 and the rhombic form is particularly suitable for turning heat-resistant alloys where edge stability and process reliability are required. Consider using a complementary holder and clamping set compatible with the ISO form to exploit the insert’s full potential. For users less familiar with grade selection, the ISO-series design enables direct exchangeability and easy comparison across tool families. Contact Metav Werkzeuge for expert advice on Tungaloy CNMG120416 AH8015 inserts and guidance on optimal chipbreaker and clamping combinations — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: 6750495 SKU: 6750495-Tungaloy Manufacturer SKU: TUN6750495 Manufacturer article number: 6750495 Model series: ISO turning inserts Material: carbide Facts Nose radius: 1.6 mm Included angle: 80° Thickness: 4.76 mm Plate size: 12 mm Special features ISO designation: CNMG120416 Grade: AH8015 (PVD-coated carbide) Plate form: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert best suited for? The CNMG120416 AH8015 is optimised for heat-resistant alloys; the PVD-coated carbide grade AH8015 provides a balance of wear resistance and edge stability for those materials. Can the insert be used for both external and internal turning? Yes, the ISO rhombic form and secure hole clamping make this insert suitable for both external and internal turning operations. How does the 1.6 mm radius affect surface finish and strength? A 1.6 mm nose radius increases edge strength for tougher cuts while still delivering a good surface finish for typical turning tasks. Is the insert indexable on standard ISO holders? The insert follows ISO dimensions (CNMG120416) and the cylindrical hole with the specified plate thickness allows secure clamping in compatible ISO toolholders. What chip control can be expected with the double-sided chipbreaker? The double-sided chipbreaker promotes reliable chip formation across a range of feeds and depths of cut, aiding evacuation and reducing the risk of chip entanglement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability and the 1.6 mm corner radius for robust edge life and consistent component quality; order directly via Metav Werkzeuge or consult the technical team for holder compatibility and optimal cutting parameters. CNMG120416 AH8015 ISO turning insert, PVD‑coated carbide — Tungaloy CNMG120416 AH8015 ISO rhombic indexable insert for versatile external and internal turning in demanding alloy machining. ISO rhombic insert CNMG 120416 PVD-coated carbide AH8015 grade Double-sided chipbreaker for stable chips Cylindrical hole for secure clamping Durable grade for heat‑resistant alloy machining The PVD-coated carbide composition of this indexable insert, identified by the AH8015 grade, is balanced for both wear resistance and cutting-edge stability. This composition makes it a reliable choice for general machining of heat‑resistant alloys where a compromise between tool life and edge strength is required. The coating reduces adhesive wear and helps maintain consistent cutting behaviour over extended cycles, which supports predictable tool-change intervals and improved machine uptime. Geometry engineered for stable cutting and surface finish The rhombic CNMG form with an 80° cutting angle and a 1.6 mm corner radius strengthens the insert for interrupted cuts and heavier engagement while still permitting reasonable surface finish. The 0° relief configuration provides a neutral geometry suited to a range of turning operations; the 4.76 mm thickness contributes to insert rigidity. These geometric parameters influence chip formation and cutting forces: a larger corner radius increases edge strength and reduces the tendency for edge chipping, while the neutral relief simplifies application across different set‑ups. Chip control and clamping that enhance process security Equipped with a double-sided chipbreaker, the insert promotes predictable chip fragmentation across many alloys and feeds, improving evacuation and reducing rework risk. The cylindrical hole and standard ISO form facilitate secure clamping in compatible holders, supporting repeatable positioning and consistent concentricity. Selection of the appropriate chipbreaker and grade should match the workpiece material, operation type and machine stability to ensure optimal cutting conditions and enhanced productivity. System compatibility and practical application advice This insert is part of the ISO turning insert system: correct compatibility with a toolholder depends on the insert form, relief angle, tolerance class, fastening method, size and thickness. Typical use covers both external and internal turning; the system build usually comprises an ISO insert, a suitable external holder or boring bar, a shim/clamp set and fastening screws. For adaptations or specific machining strategies, technical data such as corner radius, thickness and hole style determine suitability for a given set‑up — further machining parameter guidance is available on request via Metav Werkzeuge. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy AH8015 CNMG120416 insert into existing tool systems and to confirm holder compatibility and recommended cutting parameters Technical Data Article number: 6946907 Manufacturer SKU: TUN6946907 Metav SKU: 6946907-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Corner radius: 1.6 mm Thickness: 4.76 mm Insert size: 12 mm ISO code: 120416 Cutting angle: 80° Relief angle: 0° Special features Material: carbide (Hartmetall) Grade/coating: AH8015, PVD-coated carbide Insert form: rhombic (CNMG) Hole: with hole — cylindrical hole Chipbreaker: double-sided System note: ISO indexable turning insert compatible with holders based on form, tolerance and fastening FAQ What materials is this insert suitable for? The CNMG120416 AH8015 Tungaloy indexable insert is engineered primarily for heat‑resistant alloys and general turning tasks; the AH8015 PVD‑coated carbide balances wear resistance and edge stability for a broad material range. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius on the CNMG120416 insert increases edge strength and improves resistance to chipping, which is beneficial for interrupted cuts and heavier depths of cut while still supporting acceptable surface finish. Is the insert reversible or single‑use per edge? This rhombic CNMG insert is double‑sided with two usable cutting edges per side depending on wear; the double‑sided chipbreaker extends the usable life before indexing. Which holder features must be checked for compatibility? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness — verify that the holder accepts CNMG form and 12 mm size with a 4.76 mm plate thickness and cylindrical hole clamping. Can this insert be used for internal turning operations? Yes — the geometry and neutral relief of this CNMG style, combined with the AH8015 grade, allow use in both external and internal turning applications when paired with a suitable boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a balanced PVD-coated carbide grade (AH8015), an 80° rhombic ISO form and a double-sided chipbreaker for consistent productivity in external and internal turning; order directly via Metav Werkzeuge or request tailored advice from the consultants. CNMG120416 AH8015 Turning Insert for Turning (PVD‑coated carbide, 80° rhombic) — Tungaloy A CNMG120416 AH8015 ISO turning insert designed for reliable external and internal turning, offering balanced wear resistance and edge stability for heat‑resistant alloys PVD-coated carbide grade AH8015 ISO CNMG 120416 form, 80° rhombic Double-sided chipbreaker, cylindrical hole 1.6 mm corner radius for robust finishing Reliable performance for heat‑resistant alloys The combination of a PVD-coated carbide substrate and the AH8015 grade provides a well‑balanced compromise between wear resistance and edge stability, which is especially valuable when machining heat‑resistant alloys. A stable cutting edge reduces flank wear and helps maintain dimensional accuracy over longer tool life, resulting in fewer indexings and steady part quality. Explaining the benefit in practical terms: higher retention of the nominal geometry means more predictable process windows and less frequent intervention during production. Controlled chips and steady metal removal The integrated double-sided chipbreaker controls chip formation across a range of cutting conditions, improving evacuation and reducing the risk of entanglement in deeper cuts. The 1.6 mm corner radius increases edge strength and supports interrupted cuts and heavier feed rates without premature edge chipping. For operators, this means more consistent surface finish and a lower rate of unexpected tool changes, which in turn supports uninterrupted production and better overall efficiency. Simple integration into ISO tooling systems As an ISO-standard CNMG120416 insert, compatibility with holders is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert’s 80° rhombic geometry and the 0° relief angle simplify orientation in conventional external holders and adapting it to boring bars for internal turning. Specifying matching clamping components and checking the tolerance class ensures repeatable seating and secure fixation, which directly affects cutting stability and part repeatability. Practical selection and process guidance This turning plate is intended as a first choice for general machining of high‑temperature alloys: select the AH8015 grade and the double-sided geometry when a balance between productive metal removal and tool life is required. Choose the chipbreaker variant to match material ductility and machine stability; for less stable setups, a more conservative feed or smaller corner radius may be preferable. The ISO plate’s reversibility and standard form support cost efficiency by offering multiple cutting edges before disposal. Contact Metav Werkzeuge for a specification check and fast supply of the Tungaloy CNMG120416 AH8015 insert; technical advice and ordering assistance are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data Article number: 6785511 SKU: 6785511-Tungaloy Manufacturer SKU: TUN6785511 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH8015 (PVD-coated) Core specifications Corner radius: 1.6 mm Included angle: 80° Relief angle: 0° Thickness: 4.76 mm Size: 12 mm ISO code: 120416 Design & special features Rhombic plate form Double-sided chipbreaker Cylindrical hole ISO-standard CNMG geometry Suitable for external and internal turning Balanced wear resistance and edge stability FAQ Which materials are best processed with this insert? The CNMG120416 AH8015 turning insert is optimised for heat‑resistant alloys and is suitable for general turning of alloys that demand a balance between wear resistance and edge stability. How is holder compatibility ensured for this insert? Compatibility depends on the insert form, relief angle (0°), tolerance class, clamping method, size (12 mm) and thickness (4.76 mm); checking these parameters against the chosen holder ensures secure seating for the CNMG120416 geometry. What distinguishes the AH8015 grade? AH8015 is a PVD‑coated carbide grade tailored to provide a compromise between wear resistance and cutting edge stability, making it a versatile choice for challenging turning tasks. Is the insert indexable and how many edges are available? The insert is double‑sided with a reversible design, providing multiple cutting edges before replacement and improving cost efficiency per edge. Why does the corner radius matter in turning? A 1.6 mm corner radius increases edge robustness, supports interrupted cuts and generally improves surface finish under stable cutting conditions, while also influencing recommended feed rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015, a robust corner radius of 1.6 mm and ISO‑conform compatibility for consistent turning performance; ideal for machining heat‑resistant alloys and reducing tool change frequency. Order the CNMG120416 AH8015 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG120416 AH8015 indexable turning insert — ISO‑normed PVD‑coated carbide by Tungaloy CNMG120416 AH8015 is an ISO‑format indexable insert designed for general turning tasks, optimised for heat‑resistant alloys and stable chip control in external and internal turning applications. ISO‑normed CNMG profile, 80° cutting geometry PVD‑coated carbide AH8015 for heat‑resistant alloys Double‑sided chipbreaker for stable chip control Cylindrical hole, 4.76 mm thickness for secure clamping Higher productivity through balanced wear resistance and edge stability The PVD‑coated carbide AH8015 combines enhanced wear resistance with reliable edge strength, creating a balance between longevity and toughness that benefits demanding machining tasks. The grade is intended as a first choice for the general machining of heat‑resistant alloys, where thermal loads can accelerate flank and crater wear. With a corner radius of 1.6 mm, the insert delivers robust cutting edges that reduce notch formation and maintain dimensional stability, resulting in fewer interruptions and a more predictable process window. Consistent clamping and ISO compatibility for repeatable results Designed as an ISO‑normed CNMG insert, compatibility with external holders and boring bars is defined by form, 0° relief angle, tolerance class, fastening, size and thickness. The CNMG120416 AH8015 indexable insert features a cylindrical hole and a 4.76 mm thickness, paired with an inscribed circle of 12 mm, which together ensure positive seating and secure clamping in standard toolholders. This mechanical certainty reduces vibration and improves surface finish repeatability across batches. Process clarity and system benefits for straightforward integration The double‑sided design with a double‑sided chipbreaker offers two usable cutting edges per index, lowering inventory needs and improving cost efficiency per edge. Selection of the appropriate chipbreaker and grade should match the workpiece material, machining strategy and machine stability to exploit the insert’s strengths. The typical system comprises the indexable insert, a matching external holder or boring bar, a shim or clamp set and replacement fixing screws, enabling rapid changeovers and simple stock keeping. The combination supports steady cycle times and reduces unexpected downtime, backed by recognised manufacturer expertise. For reliable machining of heat‑resistant alloys, choose the CNMG120416 AH8015 indexable insert by Tungaloy — contact Metav Werkzeuge for application advice and tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6947038 SKU: 6947038-Tungaloy Manufacturer SKU: TUN6947038 Manufacturer: Tungaloy Core technical data Inscribed circle / size: 12 mm Corner radius: 1.6 mm Thickness: 4.76 mm Cutting angle: 80° Relief angle: 0° ISO code: 120416 Hole: with hole Hole style: cylindrical hole Special features PVD‑coated carbide AH8015 Double‑sided chipbreaker ISO turning insert series Rhombic plate shape (CNMG) Suitable for turning (external and internal) Optimised for heat‑resistant alloys System components: insert, external holder/boring bar, shim/clamp set, spare screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The CNMG120416 AH8015 indexable insert is formulated for general machining and is particularly suitable for heat‑resistant alloys, where the AH8015 grade provides a balance of wear resistance and edge stability. How does the double‑sided chipbreaker help production? A double‑sided chipbreaker offers two usable cutting edges per insert, which reduces tooling inventory and increases cost efficiency per edge while maintaining consistent chip control. Is the insert compatible with standard CNMG holders? Yes. The insert follows ISO CNMG geometry; compatibility is ensured when holder parameters match the insert’s form, 0° relief angle, tolerance class, fastening, size and 4.76 mm thickness. Can this insert be used for internal turning as well as external turning? Yes. The series is intended for both external and internal turning, with chipbreaker and grade choice adapted to the workpiece material and machining conditions. What benefits does the AH8015 grade deliver compared with uncoated grades? The PVD coating on the AH8015 substrate improves thermal resistance and wear performance versus uncoated grades, extending edge life under higher temperature and load scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T505 Wendeplatten - Tungaloy
Take advantage of CVD‑coated cemented carbide in a proven ISO geometry for reliable cast‑iron turning; the rhombic 80° design with 1.6 mm corner radius ensures stable cutting and consistent chip control. Order inserts directly via Metav Werkzeuge or ask Metav Werkzeuge consultants for application advice and availability. CNMG120416 T505 ISO turning insert for cast‑iron machining by Tungaloy CNMG120416 T505 is an ISO‑standard rhombic indexable insert engineered for external and internal turning of cast iron, supplied in a CVD‑coated cemented carbide grade. CVD-coated cemented carbide grade T505 For efficient cast iron turning Rhombic CNMG 80° geometry, 1.6 mm radius Double-sided chipbreaker, with central hole Precision and economy in cast‑iron turning The combination of a CVD‑coated surface and a cemented carbide substrate delivers a balance between wear resistance and cost efficiency for short to medium run operations. The applied coating reduces flank wear and sustains cutting edge integrity, which translates into longer tool life and fewer index changes; this is especially relevant when machining grey and nodular cast iron where thermal and abrasive stresses are common. The design therefore supports more predictable cycle times and lower process interruptions. Compatibility, mounting and secure clamping Compatibility with toolholders depends on insert form, clearance angle, tolerance class, clamping arrangement and plate thickness. The rhombic CNMG form with an 80° approach angle and a 0° clearance makes the insert suitable for standard CNMG turning holders; the central cylindrical hole supports positive clamping and repeatable locating. For systematic replacement and inventory control, the ISO designation clarifies fitment across matched holders and underlay/clamping sets. Chip control, geometry and application benefits A double‑sided chipbreaker matched to the T505 grade helps to control chip formation during interrupted and continuous cuts, reducing the risk of built‑up edge and improving surface finish. The 1.6 mm corner radius provides a compromise between edge strength and finishing capability, offering improved robustness on stability‑challenging setups while maintaining achievable surface quality. Where stable clamping and correct machining parameters are applied, the insert supports efficient material removal while keeping rework to a minimum. For specification checks, cutting parameter recommendations or to reserve CNMG120416 T505 inserts from Tungaloy, contact Metav Werkzeuge for tailored application support and immediate availability via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6831204 SKU: 6831204-Tungaloy Manufacturer SKU: TUN6831204 Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Cutting angle: 80° Thickness: 4.76 mm Insert size: 12 Clearance angle: 0° Special features Grade/coating: T505, CVD‑coated cemented carbide Shape: rhombic CNMG (ISO CNMG120416) Chipbreaker: double‑sided Hole style: cylindrical with hole Application: Turning (external and internal) System: ISO indexable insert FAQ What materials is this insert best suited for? The CNMG120416 T505 insert is intended primarily for cast‑iron machining; the T505 grade and CVD coating are optimised for efficient, economical turning of grey and nodular cast iron. Is the insert compatible with standard CNMG toolholders? Yes, the ISO CNMG120416 designation, 80° geometry and central cylindrical hole make it compatible with standard CNMG turning holders that accept ISO‑standard rhombic inserts. How does the 1.6 mm corner radius affect cutting performance? A 1.6 mm radius increases edge strength and reduces the risk of chipping in less rigid set‑ups while still allowing acceptable surface finishes when correct cutting parameters are chosen for the Tungaloy grade. Can this insert be used for interrupted cuts? The CVD‑coated cemented carbide grade T505 combined with a robust chipbreaker provides improved resistance during interrupted cuts, though cutting parameters should be adapted to the specific workpiece and setup. What identifies the exact product for reordering? Reorder using the ISO designation CNMG120416, grade T505 and manufacturer article number 6831204 (SKU 6831204‑Tungaloy) to ensure the correct Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120416 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD coating, precise CNMG geometry and economical double-sided indexing for consistent production results; order original Tungaloy inserts through Metav Werkzeuge or request application advice from the consultancy team. CNMG120416 T5105 CNMG turning insert — CVD-coated carbide by Tungaloy The CNMG120416 T5105 is a CVD-coated carbide indexable insert designed for high‑speed turning of cast iron under stable machining conditions. CVD-coated carbide grade T5105 Designed for high-speed cast iron turning Rhombic CNMG 120416 geometry, 80° cutting angle Double-sided chipbreaker, cylindrical hole Increased productivity through high-speed wear resistance The CVD-coated carbide grade T5105 is formulated for high-speed machining of cast iron, delivering a balance between wear resistance and edge stability. This combination reduces flank wear during continuous cuts, which leads to longer tool life and fewer indexings per component lot. The engineered coating provides predictable performance in stable setups, so cycle times can be shortened without compromising surface finish. Selecting this grade supports a measurable increase in throughput where process parameters remain consistent. Secure clamping and geometry that ensures repeatable results With its ISO CNMG rhombic form and an 80° cutting angle, this indexable plate offers robust support in standard turning holders. The cylindrical hole and the specified tolerance classes are decisive for correct seating and torque transmission to the pocket; matching a holder by form, relief angle and size prevents chatter and preserves edge life. The corner radius 1.6 mm and plate thickness 4.76 mm balance strength and finish, enabling stable cuts on external and internal turning tasks while maintaining consistent dimensional control. Practical system benefits for workshop integration Being double-sided with a doppelseitig chipbreaker design, the insert gives two usable edges per indexing which improves cost efficiency in batch production. The plate size 12 and the 0° relief suit a wide range of external and internal turning operations when paired with the correct holder, clamp set and replacement screws. Good chip control from the integrated chipbreaker reduces heat buildup at the cutting zone, which benefits tool life and reduces rework. For reliable implementation, select the chipbreaker and grade according to workpiece material, machining method and fixture rigidity to achieve consistent surface quality and repeatable cycle times. Contact Metav Werkzeuge today for stock availability of the original Tungaloy CNMG120416 T5105 insert and to obtain machining recommendations tailored to specific cast iron turning processes. Technical Data Article number: 6852913 SKU: 6852913-Tungaloy Manufacturer SKU: TUN6852913 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Cutting angle: 80° Relief angle: 0° Plate size: 12 Plate thickness: 4.76 mm Hole style: cylindrical hole Special features CVD-coated carbide Grade T5105 Rhombic CNMG geometry Double-sided chipbreaker Indexable turning insert Intended application: turning Compatible with ISO turning holders Suitable for high-speed machining of cast iron FAQ What materials is this insert optimised for? The Tungaloy CNMG120416 T5105 insert is optimised for machining cast iron and performs best under stable, high‑speed turning conditions. How many cutting edges are available per insert? This CNMG indexable plate is double-sided, providing two usable cutting edges per index. Which holder features must be matched for correct compatibility? Compatibility requires matching form, relief angle, tolerance class, attachment style, size and thickness to the chosen ISO turning holder and clamping set. What are the key dimensions to check before ordering? Check corner radius 1.6 mm, plate size 12, plate thickness 4.76 mm and the presence of a cylindrical hole to ensure correct seating in the toolholder. Is this an original Tungaloy product and how is it identified? The item is supplied as an original Tungaloy indexable insert, identified by article number 6852913 and manufacturer SKU TUN6852913 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T5115 Wendeplatten - Tungaloy
Take advantage of the proven balance between edge stability and wear resistance offered by the CVD-coated T5115 grade, combined with the ISO CNMG profile for straightforward integration into standard turning tool systems. Order directly via Metav Werkzeuge or consult our specialists for selection support. CNMG 120416 T5115 Turning Insert — Tungaloy (CVD-coated carbide, 80°) A CNMG120416 T5115 indexable insert for external and internal turning, optimised for cast iron machining with a stable cutting edge and universal chip control. ISO CNMG 120416 rhombic 80° CVD-coated carbide grade T5115 Double-sided chipbreaker, cylindrical hole 1.6 mm corner radius, 4.76 mm thickness High-performance grade for consistent edge life The CVD-coated T5115 carbide grade offers a well-balanced combination of wear resistance and edge stability, making it suitable for a wide range of cast iron turning tasks. The chemical vapour deposition (CVD) layer increases resistance to abrasive wear at elevated cutting temperatures, which extends the effective service life of the insert while maintaining dimensional accuracy. This results in fewer tool changes and more predictable cycle times on batch and single-piece production alike, supporting a more efficient machining process. ISO compatibility simplifies toolholder selection The insert follows the ISO CNMG profile and is supplied in the standard CNMG120416 format, which ensures compatibility with common external holders and boring bars when matched by form, clearance angle, tolerance class, fixing method, size and thickness. The rhombic 80° shape and 0° clearance angle demand the correct seating and clamping; the insert’s cylindrical locating hole and double-sided design allow economical use of both cutting faces. This standardisation reduces setup complexity and helps to maintain repeatable clamping accuracy in everyday shop-floor conditions. Practical application advice for turning cast iron Designed primarily for turning operations on cast iron, the insert performs well in both external and internal turning when paired with an appropriate chipbreaker and toolholder rigidity. The 1.6 mm corner radius supports robust edge strength for interrupted cuts and general-purpose profiling, while the 4.76 mm plate thickness contributes to stability under moderate cutting forces. Select the double-sided chipbreaker and the T5115 grade to match the workpiece condition and machine stability; a stable setup and correct feed/speed settings will deliver the best surface finish and tool life. Contact Metav Werkzeuge for availability and tailored advice on integrating Tungaloy CNMG 120416 T5115 inserts into your turning applications Technical data Article number: 6852914 Manufacturer SKU: TUN6852914 Model series: ISO turning indexable inserts Grade: T5115 Material: carbide Facts ISO designation: 120416 Plate size: 12 Plate thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Included hole: with hole (cylindrical) Insert angle: 80° Special features CVD-coated hardmetal for wear resistance Double-sided chipbreaker Rhombic plate form Cylindrical locating hole Suitable for turning of cast iron System: ISO insert, compatible external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The CNMG120416 T5115 insert is primarily intended for machining cast iron; the CVD-coated carbide grade T5115 provides a balanced combination of wear resistance and edge stability for such applications. How does the T5115 coating affect performance? The CVD coating on the T5115 grade increases abrasion resistance at elevated temperatures, improving tool life and delivering consistent cutting performance during prolonged turning operations. Is this insert compatible with standard CNMG toolholders? Yes, the CNMG120416 format follows ISO dimensions and is compatible with standard CNMG holders when matched for form, clearance angle, tolerance class, fixing method, size and thickness. Can both sides of the insert be used? The insert is double-sided with a cylindrical locating hole, enabling economical use of both cutting faces and straightforward indexation. Which corner radius is supplied and what is it good for? This insert has a 1.6 mm corner radius, offering enhanced edge strength suitable for general profiling and interrupted cuts while maintaining a good surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T5125 Wendeplatten - Tungaloy
Reliable CVD-coated carbide combined with a double-sided chipbreaker and a 0° clearance angle provides stable performance for interrupted turning in cast iron; benefit from enhanced edge life and consistent chip control. Order the CNMG 120416 T5125 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 120416 T5125 — ISO turning insert for cast-iron turning by Tungaloy, CVD-coated carbide A CNMG 120416 T5125 ISO turning insert engineered for external and internal turning, optimised for interrupted cuts and less stable machining conditions. CVD-coated carbide for wear resistance Double-sided chipbreaker for interrupted cuts Rhombic CNMG form, 80° cutting angle 1.6 mm corner radius, cylindrical hole Maximise productivity in interrupted turning The combination of CVD-coated carbide and the tougher T5125 grade is designed to withstand the thermal and mechanical loads typical of interrupted cuts in cast iron. The CVD layer acts as a thermal barrier and improves wear resistance at elevated cutting temperatures, while the double-sided chipbreaker promotes consistent chip formation even when feed or depth of cut varies. For production environments where process stability fluctuates, this configuration reduces downtime by maintaining edge integrity and lowering the frequency of insert changes. Strong edge and reliable surface finish with fewer tool changes A 1.6 mm corner radius and a plate thickness of 4.76 mm give the insert mechanical strength and support during heavy engagement, which helps preserve the cutting edge and improves dimensional repeatability. The rhombic CNMG form with an 80° cutting angle provides a robust geometry for general turning while enabling controlled chip flow. Compatibility with the clamping system is defined by form, clearance angle, tolerance class, mounting and size; checking these parameters ensures the best fit with the chosen holder and contributes to consistent surface quality. Easy integration into ISO tool systems and versatile application As an ISO indexable insert, the component fits standard external holders or boring bars when the correct geometry and tolerance are observed. The cylindrical hole secures mounting and helps prevent rotation or misalignment during interrupted passes. System setup usually comprises the ISO insert, a matching external holder or boring bar, a backing plate/clamp set and replacement fixing screws. Selection of the appropriate chipbreaker and grade according to the workpiece material and machine rigidity results in predictable performance and economical machining cycles. For robust cast-iron turning with Tungaloy’s proven T5125 grade, contact Metav Werkzeuge for application advice and current availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852915 SKU: 6852915-Tungaloy Manufacturer SKU: TUN6852915 Manufacturer: Tungaloy Material: Carbide Model series: ISO turning indexable inserts Designation: CNMG120416 Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Inscribed circle (size): 12 mm Cutting angle: 80° Clearance angle: 0° Special features CVD-coated carbide grade T5125 Double-sided chipbreaker Rhombic CNMG form Cylindrical hole for secure mounting ISO designation CNMG120416 Application: Turning; suitable for cast iron, interrupted cuts System components: external holder/boring bar, backing/clamp set, spare screws FAQ Which machining tasks is this insert intended for? The CNMG 120416 T5125 insert is intended for external and internal turning operations, especially where interrupted cuts occur. Is this grade suitable for cast iron? Yes. The T5125 grade is a tougher CVD-coated carbide tailored for cast-iron machining under interrupted or less stable cutting conditions. How does the CVD coating benefit machining? The CVD layer on the carbide provides a hard, thermally resistant surface that reduces flank and crater wear, which helps the CNMG 120416 T5125 retain cutting performance at higher temperatures. What must be considered when choosing a holder? Holder compatibility depends on insert form, clearance angle, tolerance class, mounting, size and thickness; use an ISO external holder or boring bar that matches these parameters for the CNMG 120416 specification. What are the key dimensions to check before fitting the insert? Important dimensions are the 1.6 mm corner radius, 4.76 mm plate thickness, 12 mm inscribed circle, 80° cutting angle and 0° clearance angle, as specified for the CNMG 120416 T5125. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T515 Wendeplatten - Tungaloy
High machining economy from the T515 CVD-coated carbide combined with an 80° cutting geometry and a 1.6 mm nose radius ensures stable chip formation and productive turning cycles; order the CNMG120416 insert directly via Metav Werkzeuge or consult the technical team for suitability and application advice. CNMG120416 T515 Turning Insert (ISO CNMG 120416) — CVD-coated carbide, 1.6 mm radius | Tungaloy The CNMG120416 T515 is an ISO rhombic turning insert engineered for economical and reliable machining of cast iron in both external and internal turning operations CVD-coated carbide grade T515 ISO CNMG 120416 rhombic insert 80° approach angle, 1.6 mm nose radius Double-sided chipbreaker, cylindrical mounting hole Productive machining with optimised chip control The combination of a CVD-coated carbide substrate and the T515 grade results in consistently stable cutting performance when machining cast iron. The coating enhances wear resistance and reduces built-up edge, which extends tool life and maintains a predictable cutting-to-wear ratio. As a consequence, cycle times are minimised and tool-change intervals are spaced further apart, delivering measurable improvements in manufacturing efficiency and component consistency. Clear mounting and holder compatibility for reliable assembly The insert's rhombic form, cylindrical hole and defined geometrical parameters determine compatibility with indexable toolholders. Matching the insert to an appropriate holder requires checking the insert form, clearance angle (0°), tolerance class, clamping design, nominal size and plate thickness. The presence of a double-sided chipbreaker allows reversed indexing for economical use of cutting edges, while the cylindrical hole ensures secure seating and repeatable positioning during assembly and re-indexing. Practical application guidance and system context Designed within the ISO indexable turning insert system, the plate works best with a matched external holder or boring bar, shim/clamp set and the correct clamping screws. For interrupted cuts or less stable set-ups, selecting the appropriate chipbreaker variant and ensuring robust clamping will preserve edge integrity and surface finish. The insert supports both roughing and finishing passes when used with correct speeds and feeds for cast iron and is suitable where predictable process behaviour and ease of indexability are priorities. For application support, stock availability or to request technical datasheets for the Tungaloy CNMG120416 T515 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a specialist. Technical Data Article number: 6740135-Tungaloy Manufacturer item number: 6740135 Manufacturer SKU: TUN6740135 Manufacturer: Tungaloy Core Data Insert designation: CNMG120416 Insert size: 12 mm Plate thickness: 4.76 mm Approach/lead angle: 80° Clearance angle: 0° Corner radius: 1.6 mm Features & Applications CVD-coated carbide (T515) Material: carbide Double-sided chipbreaker Cylindrical mounting hole Rhombic insert form For turning (external and internal) Suited for cast iron machining ISO indexable turning insert series FAQ What materials is the insert suited for? The CNMG120416 T515 insert is optimised for cast iron machining; the T515 grade and CVD-coated carbide composition provide stable chip control when turning cast iron. How many cutting edges are available on this insert? Thanks to the double-sided geometry, the insert offers multiple usable cutting edges through indexing, improving economy per insert. Which holders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; holders designed for ISO CNMG 120416 inserts are appropriate. How does the 1.6 mm nose radius affect the process? The 1.6 mm radius balances edge strength and surface finish capability, making it suitable for medium-duty finishing and semi-finishing operations. Is this insert field-replaceable and easy to index? Yes. The rhombic form with a cylindrical hole and standard ISO dimensions enables straightforward indexing and replacement in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T515 Wendeplatten - Tungaloy
Benefit from the proven combination of CVD-coated carbide (T515) and an 1.6 mm corner radius for stable, economical cast‑iron turning; order the (CNMG120416 T515 Tungaloy) directly via (Metav Werkzeuge) or ask our consultants if needed. CNMG 120416 T515 CNMG turning insert for cast‑iron — Tungaloy A CNMG120416 T515 indexable insert designed for efficient external and internal turning of cast iron, compatible with ISO CNMG holders. CVD-coated carbide grade T515 Optimised for cast iron machining Rhombic CNMG shape, 80° lead angle Double-sided chipbreaker, 1.6 mm radius High productivity through tailored coating and substrate The combination of a CVD-coated surface and a carbide substrate delivers reproducible performance when machining cast materials. The T515 grade is formulated for economical processing of cast iron, offering secure cut control under interrupted cuts and varying rigidity conditions. This results in longer effective tool life and fewer indexings, reducing non‑cutting time and improving overall throughput. The technical design supports consistent chip formation and wear behaviour, making it a reliable choice for production environments. Geometry engineered for rigidity and precision The rhombic CNMG format with an 80° lead angle and a 0° clearance provides a stiff cutting geometry that helps maintain dimensional accuracy on external and internal turning operations. A corner radius of 1.6 mm increases edge strength where interrupted cuts or variable stability are encountered, while the 4.76 mm thickness ensures secure seating in the pocket. The presence of a cylindrical hole facilitates positive clamping and repeatable positioning in ISO‑standard holders, which supports stable cutting conditions and consistent surface finish. Economic advantage from insert design and chip control A double‑sided chipbreaker reduces the need for frequent tool changes and contributes to cost efficiency over multiple indexings. The insert’s T515 coating promotes controllable chip evacuation when paired with the correct holder and cutting parameters, minimising built‑up edge and protecting the cutting edge from premature wear. For shops seeking predictable costs per component, this insert offers a balance of tool life and cutting speed that often translates into lower machining costs per part compared with uncoated grades. Integration into ISO tool systems and recommended usage The product is an ISO‑standard turning indexable insert intended for use with appropriate CNMG external holders or boring bars, together with the matching shim and clamp set. Typical system components include the insert, a compatible holder, underlay or clamp set and replacement screws. Selection of the correct chipbreaker and grade should be aligned to workpiece stability, the presence of interrupted cuts and the desired cutting speed to fully exploit the T515 advantages in cast‑iron turning. For productive, reliable cast‑iron turning with Tungaloy tools choose the CNMG120416 T515 insert; contact Metav Werkzeuge (info@metav-werkzeuge.com | +49 2822 7131930) for tailored advice and rapid supply. Technical data Article number: 6793690 Manufacturer SKU: TUN6793690 Seller SKU: 6793690-Tungaloy Model series: ISO turning indexable inserts Core technical data Designation: CNMG120416 (ISO 120416) Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Lead/approach angle: 80° Clearance angle: 0° Hole: with cylindrical hole Grade/coating: T515 (CVD‑coated carbide) Material: carbide Special features Rhombic insert shape (CNMG) Double‑sided chipbreaker Intended application: turning (external and internal) System composition: insert + holder/shim/clamp/screws Compatibility: ISO CNMG holders and tooling systems FAQ What materials is this insert optimised for? The CNMG120416 T515 is optimised for machining cast iron, with the T515 CVD coating and carbide substrate designed to control chips and wear during cast‑iron turning. Which holder form is required for proper seating? The insert conforms to the ISO CNMG form and requires a matching CNMG external holder or boring bar that accepts the rhombic indexable insert with a cylindrical hole. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius increases edge strength and helps resist notch wear and chipping during interrupted cuts, improving process stability and dimensional consistency. Is the insert suitable for interrupted cuts? Yes; the T515 grade and the reinforced geometry make the insert well suited to interrupted cutting conditions commonly encountered in cast‑iron operations. What should be checked when selecting this insert for an application? Confirm the holder compatibility with the ISO CNMG form, evaluate workpiece stability, and choose the chipbreaker and cutting parameters that match the desired surface finish and productivity; the CNMG120416 T515 is especially effective where reliable chip control and cost efficiency are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T515 Wendeplatten - Tungaloy
Benefit from a combination of economical cast-iron machining, robust CVD-coated carbide and ISO compatibility for smooth turning operations; order the CNMG120416 T515 insert directly via Metav Werkzeuge or consult our advisors for application guidance. CNMG120416 T515 ISO turning insert for turning — Tungaloy A CNMG120416 T515 ISO turning insert engineered for efficient external and internal turning of cast iron, offering reliable chip control and proven CVD-coated carbide performance. CVD-coated carbide for economical machining ISO CNMG120416 form, 80° cutting angle Rhombic insert, 4.76 mm thickness Double-sided chipbreaker with cylindrical hole Maximise productivity with optimised coating and grade The combination of a CVD-coated surface and a wear-resistant cemented carbide substrate makes this insert particularly suited to productive machining of cast iron. The coating increases tool life at elevated cutting speeds while the substrate maintains a stable cutting edge under interrupted cuts. This results in a measurable improvement in material removal rates and a lower replacement frequency compared with uncoated alternatives, supporting continuous production and reduced machining costs. Precise geometry that simplifies toolholder matching Designed to the ISO CNMG form, the insert features an 80° cutting angle and a 1.6 mm corner radius, together with a 4.76 mm plate thickness and 12 mm size, which ensure consistent engagement and predictable cutting forces. The rhombic shape and the presence of a cylindrical hole support secure clamping and interchangeability between compatible ISO turning holders. Users gain repeatable positioning and predictable performance, reducing setup times and improving process reliability. Reliable chip control and application flexibility A double-sided chipbreaker tailored to the T515 grade delivers controlled chip formation for facing and turning operations, which eases swarf management and helps protect the workpiece surface finish. The grade is optimised for economic machining of cast iron, balancing toughness for interrupted cuts with good edge stability. Combined with the ISO geometry and robust carbide composition, this insert is suitable for a broad range of turning tasks where consistent results and uptime are priorities. For specification support or to place an order for the Tungaloy CNMG120416 T515 insert, contact Metav Werkzeuge — technical advice and prompt supply are available via info@metav-werkezeuge.com or by telephone at +49 2822 7131930 Technical data Article number: 6750491 SKU: 6750491-Tungaloy Manufacturer SKU: TUN6750491 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Insert size: 12 mm Cutting edge angle: 80° Clearance angle: 0° Hole: cylindrical Special features CVD-coated cemented carbide Double-sided chipbreaker Rhombic insert form (CNMG) With cylindrical hole for secure clamping ISO compatibility for external and internal turning Intended application: Turning Grade: T515 — optimised for cast iron FAQ What materials is this insert best suited for? The CNMG120416 T515 insert is designed primarily for economical machining of cast iron, with the T515 grade optimised to balance edge stability and toughness for interrupted cuts. Which toolholders are compatible with this insert? The insert conforms to the ISO CNMG form; compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness — the CNMG geometry matches standard ISO turning holders. How does the CVD coating benefit machining performance? The CVD-coated cemented carbide of this insert increases wear resistance at higher cutting speeds, extending tool life and maintaining cutting-edge integrity during continuous and interrupted turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 grade and the ISO CNMG 120416 form for consistent, productive turning of rostfreier Stahl; combine long tool life with predictable chip control and order the CNMG120416 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed CNMG 120416 T6215 turning insert by Tungaloy — CVD-coated carbide, 1.6 mm radius CNMG120416 T6215 is an ISO rhombic turning insert designed for external and internal turning applications, optimised for rostfreier Stahl under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO rhombic CNMG 120416 geometry 0° clearance angle for accurate profiling Central hole with cylindrical style Precision and extended tool life for rostfreier Stahl The CVD-coated carbide specification T6215 delivers high wear resistance and consistent edge stability, making it suitable for continuous production runs. The coating technology reduces flank wear and extends service intervals, which results in lower tool-change frequency and improved uptime. In practice, this means fewer interruptions and more predictable component quality when machining rostfreier Stahl with a robust, wear-resistant cutting edge. ISO conformity and seamless holder compatibility Built to the ISO CNMG 120416 standard, the insert fits ISO-compatible external holders when form, clearance, tolerance class, fastening and thickness match. The rhombic shape and the specified 0° clearance angle ensure precise seating and repeatable geometry. Compatibility depends on holder design; therefore, selecting a matched external holder, clamp set and replacement screws is essential to exploit the insert’s stability and repeatability. Chip control and cutting stability for reliable surface finish The double-sided chipbreaker is tailored to provide stable chip formation across common turning regimes, aiding continuous machining and short interruptions alike. The 1.6 mm corner radius balances strength and finish: it supports edge robustness while contributing to acceptable surface quality on cylindrical profiles. Where surface integrity and edge life are priorities, this geometry maintains process security and reduces rework. Clear technical benefits for process optimisation Choosing a CVD-coated indexable insert of this specification supports higher cutting speeds and consistent performance on rostfreier Stahl, with benefits in cycle time and tool economy. The central cylindrical hole and precise 4.76 mm thickness ensure secure clamping and repeatable indexing; the 80° insert angle provides good versatility for general turning tasks. Overall, the system approach—insert, holder and clamp—enables a controlled machining strategy with predictable outcomes For original Tungaloy quality and reliable machining of rostfreier Stahl, contact Metav Werkzeuge for availability and detailed advice: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6944572 Manufacturer SKU: TUN6944572 SKU: 6944572-Tungaloy Model series: ISO-Drehwendeschneidplatten Description: CNMG120416 T6215 Tungaloy insert Numbers / Core technical data Size: 12 Thickness: 4.76 mm Corner radius: 1.6 mm Relief angle: 0° Insert angle: 80° Mounting: with hole (cylindrical) Designs / Special features Material: Hartmetall Coating / grade: T6215 (CVD-coated) Shape: rhombic Chipbreaker: double-sided Application: Turning, rostfreier Stahl System components: insert, compatible external holder, clamp set, replacement screws FAQ What materials is this insert suitable for? The CNMG120416 T6215 insert is specified for rostfreier Stahl and similar challenging materials where wear resistance and stable cutting are required. How does the T6215 grade improve machining performance? Tungaloy's T6215 CVD-coated carbide provides enhanced flank wear resistance and edge life, helping to maintain dimensional accuracy and reduce tool-change frequency in turning operations. What geometric details ensure compatibility with holders? Compatibility relies on the ISO CNMG 120416 form, the 0° clearance angle, the 4.76 mm thickness and the rhombic shape; these dimensions must match the chosen holder and clamp set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T6215 and a double-sided chipbreaker for reliable, economical turning of stainless steels; the robust 1.6 mm corner radius and ISO CNMG geometry support consistent surface quality and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for selection guidance. CNMG 120416 T6215 — Indexable turning insert for stainless steel turning | Tungaloy A CNMG120416 T6215 indexable insert designed for turning applications, offering a wear-resistant CVD-coated carbide grade for stable to slightly interrupted cuts on stainless steels. CVD-coated carbide grade T6215 Optimised for stainless steel machining Rhombic 80° insert with 1.6 mm corner Double-sided chipbreaker, cylindrical hole Increased uptime through wear-resistant coating and grade The combination of a CVD-coated surface and T6215 cutting grade gives a clear performance advantage when machining stainless steel: the coating reduces flank wear and the substrate provides toughness against edge chipping. This results in longer tool life and fewer index changes, which directly improves process stability and reduces production interruptions. For shops aiming to raise throughput without sacrificing surface finish, the insert’s wear characteristics make it a dependable choice. Simple compatibility and secure clamping for predictable results Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic design with an 80° included angle and cylindrical hole matches standard CNMG-style holders; the 4.76 mm thickness and size 12 make it straightforward to pair with matching external holders or a boring bar. Using the correct underlay/clamp set and replacement screws ensures repeatable seating and consistent cutting geometry, which contributes to process reliability and reproducible part quality. Improved chip control and surface finish in stable conditions The double-sided chipbreaker is configured for turning operations and promotes efficient chip formation when combined with appropriate feeds and speeds. In stable to lightly interrupted cutting, the insert helps produce a consistent surface finish while managing chips safely out of the cut. Selecting the chipbreaker and grade according to the workpiece condition and machine rigidity delivers the best balance of productivity and component quality, supported by the Tungaloy design philosophy for productive cutting tools. For machining stainless steel with enhanced process security and extended tool life, contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts or request technical support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944548 SKU: 6944548-Tungaloy Manufacturer SKU: TUN6944548 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG120416 Grade: T6215 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Hole: cylindrical Special features Material: carbide Coating: CVD Chipbreaker: double-sided Insert form: rhombic (80°) Application: turning, stainless steel Mounting: for holders with cylindrical-hole fastening System components: insert, external holder or boring bar, underlay/clamp and replacement screws FAQ Which materials is this insert most suitable for? The CNMG120416 T6215 indexable insert (Tungaloy, SKU 6944548-Tungaloy) is designed primarily for stainless steel turning under stable to slightly interrupted conditions. How is compatibility with toolholders determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening type, size and thickness; the CNMG120416 fits standard CNMG holders when the holder matches the 12 mm size, 4.76 mm thickness and cylindrical-hole fastening. When should the double-sided chipbreaker be chosen? The double-sided chipbreaker is recommended when chip control and short-term stability are required; select this chipbreaker together with the T6215 grade for improved chip formation and surface quality on stainless steels. Is the insert indexable and how many cutting edges are available? The CNMG120416 insert is double-sided and indexable; each usable cutting edge should be rotated in sequence until wear dictates replacement. What dimensions should be checked before ordering the insert? Confirm the insert size (12 mm), thickness (4.76 mm), corner radius (1.6 mm), hole style (cylindrical) and clearance angle (0°) to ensure correct fit with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T6215 Wendeplatten - Tungaloy
Reliable turning performance for stainless steels is achieved through the combination of a CVD-coated carbide grade and an 80° rhombic geometry with a 1.6 mm corner radius; order this insert via Metav Werkzeuge or consult our specialists for application advice. CNMG120416 T6215 ISO turning insert — rhombic 80° for turning, Tungaloy A CNMG120416 T6215 indexable insert designed for ISO-compliant external and internal turning, optimised for stable to lightly interrupted machining of stainless steels CVD-coated carbide T6215 for wear resistance 80° rhombic geometry for versatile turning 1.6 mm corner radius for robust edge strength Double-sided chipbreaker for consistent chip control Cylindrical hole for secure mounting Improve process stability when machining stainless steels The insert's CVD-coated carbide grade provides elevated wear resistance and thermal stability during continuous turning operations, which translates into fewer interruptions and more predictable tool life. The moderate 1.6 mm corner radius reduces edge chipping risk during heavier engagement yet maintains a reliable profile for achieving consistent surface finish. Used in the correct cutting window, this geometry supports stable cutting and helps maintain dimensional tolerance in serial production. Simplify tooling management with ISO compatibility As an ISO-compliant CNMG form, the insert fits a wide range of standard holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The 80° rhombic geometry balances strength and accessibility for shoulders and profiles, while the cylindrical hole and standard thickness simplify clamping and replacement routines. The double-sided design and standardised dimensions reduce inventory complexity and enable rapid indexation during changeovers, contributing directly to improved shop-floor efficiency. Balance cutting performance and reproducibility The T6215 grade offers a wear-resistant coating tailored to the demands of stainless steel turning under stable to slightly interrupted conditions. Combined with a double-sided chipbreaker, the insert promotes controlled chip formation, reducing rework and machine downtime. This focus on reproducible cutting behaviour supports a favourable cost-per-part ratio by extending edge life and lowering the frequency of insert changes in medium- to high-volume runs. Practical selection and application guidance Selection of the correct chipbreaker and holder stiffness is essential: choose a breaker and grade that match the workpiece alloy and the expected interruption severity. The insert's geometry and coating are optimised for machining oxidising and work‑hardening alloys, but process variables such as feed, depth of cut and coolant strategy will determine the final cutting window. When paired with a suitably rigid toolholder and correct clamping, this insert offers a straightforward route to increased cycle stability and consistent surface quality in production turning. For robust stainless steel turning with Tungaloy reliability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and ordering options Technical Data Article number: 6944568 SKU: 6944568-Tungaloy Manufacturer SKU: TUN6944568 Model series: ISO-Drehwendeschneidplatten Designation: CNMG120416 T6215 Tungaloy-Wendeplatte Core data Corner radius: 1.6 mm Insert angle: 80° Thickness: 4.76 mm Plate size: 12 mm Special features Coating: T6215 (CVD) Material: carbide Chipbreaker: double-sided Geometry: rhombic (CNMG) Hole: with cylindrical hole Application: turning of stainless steels System: ISO insert compatible with suitable holder, shim/clamping set and fastening screws FAQ Is this insert suitable for machining stainless steels? Yes. The CNMG120416 T6215 insert is produced in a CVD-coated carbide grade specifically intended for turning rostfreiem Stahl under stable to slightly interrupted conditions. Which toolholders are compatible with this insert form? Compatibility follows ISO CNMG form factors; the insert matches holders that accept CNMG geometry with the correct clearance, tolerance class, size and fastening method. Can this insert be used for internal turning as well as external turning? Yes. The geometry and chip control make the insert suitable for both external and internal turning applications when paired with the appropriate boring bar and clamping. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker delivers consistent chip formation and improved chip evacuation, which assists in reducing rework and enhancing process stability during serial production. How should the insert be mounted and secured? The insert features a cylindrical hole for secure mounting; use the matching ISO holder, a suitable shim or clamp set and the recommended fastening hardware to ensure stable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215, precise CNMG geometry and a 1.6 mm corner radius for stable chip control and extended tool life; order directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. CNMG120416 T6215 ISO turning insert for turning applications — Tungaloy A CNMG120416 T6215 indexable turning insert designed for machining rostfreier Stahl under stable to slightly interrupted cutting conditions, supplied in ISO‑standard CNMG geometry CVD-coated carbide grade T6215 80° rhombic insert geometry Double-sided chipbreaker, with cylindrical hole Optimised for rostfreier Stahl turning High wear resistance and predictable performance for rostfreier Stahl machining The CVD‑coated carbide grade T6215 delivers a balance of wear resistance and toughness, making it suitable for continuous and slightly intermittent turning of rostfreier Stahl. The coating reduces flank wear and helps maintain cutting edge integrity, while the substrate provides shock tolerance during modest interruptions. In practice, this means longer in‑process life, fewer index changes and more predictable batch output, which supports efficient production planning and reduces unplanned downtime. Secure fit and standardised compatibility to simplify tooling selection Produced to ISO dimensions and featuring CNMG rhombic geometry with an 80° included angle, the insert is compatible with a wide range of external holders and boring bars when the holder matches form, clearance angle, tolerance class, fastening style, size and thickness. The insert's cylindrical hole and defined 4.76 mm thickness permit reliable clamping with standard shims and screws, ensuring repeatable concentricity and stable cutting conditions. Clear guidance on holder selection minimises trial‑and‑error and contributes to reproducible part quality. Cost‑effective system performance and recommended applications With a 1.6 mm corner radius and double‑sided chipbreaker, this indexable insert is aimed at both external and internal turning tasks where surface finish and edge life matter. The rhombic shape allows economical use of both major corners, improving cost per cutting edge. Typical use cases include general turning of shafts and rings in rostfreier Stahl, light profiling and stepping operations. The insert integrates into a standard system setup comprising a matching external holder or bar, a locating shim or clamp set and the appropriate replacement screws, thereby simplifying inventory management while supporting productive machining cycles. For further technical data or process recommendations, Metav Werkzeuge provides application support and detailed advice. Contact Metav Werkzeuge for tailored process recommendations and to source Tungaloy CVD‑coated CNMG inserts directly Technical data Article number: 6903021 Manufacturer SKU: TUN6903021 SKU: 6903021-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Geometry / designation: CNMG120416 Corner radius: 1.6 mm Thickness: 4.76 mm Size: 12 mm Included angle: 80° Clearance angle: 0° Hole style: with cylindrical hole Materials & features Material: carbide Coating: CVD-coated (grade T6215) Chipbreaker: double-sided Plate form: rhombic Application: turning Typical system: ISO indexable insert with matching holder, shim/clamp and screws Optimised for rostfreier Stahl FAQ What materials is this insert suited for? The CNMG120416 T6215 insert is optimised for machining rostfreier Stahl and performs well in stable to lightly interrupted turning operations. How does the T6215 coating benefit tool life? The CVD coating on the T6215 grade reduces flank wear and improves resistance to adhesive and abrasive wear, which extends the service interval of the insert during continuous rostfreier Stahl turning. Can the insert be used in internal and external turning? Yes, the rhombic CNMG geometry and double‑sided design make the insert suitable for both internal and external turning when paired with the appropriate holder and clamping components. How is compatibility with a toolholder determined? Compatibility depends on matching geometry, clearance angle, tolerance class, fastening arrangement, size and thickness; these parameters should align with the ISO‑standard dimensions of the insert. What system components are required to mount the insert? A compatible external holder or boring bar, a locating shim or clamp set and the correct replacement screws are required to secure the insert for machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a robust 1.6 mm corner radius and ISO compatibility to maintain steady productivity in turning operations; order the insert directly via Metav Werkzeuge or consult their specialists for application-specific advice. CNMG120416 T9205 — Tungaloy indexable turning insert, CVD-coated carbide, 80° rhombic the CNMG120416 T9205 is a CVD-coated carbide indexable insert designed for productive external and internal turning of steel under stable cutting conditions CVD-coated grade T9205 for high wear resistance 80° rhombic shape for general turning applications 1.6 mm corner radius for robust edge strength Double-sided design with cylindrical hole for secure clamp High wear resistance for sustained productivity The CVD-coated T9205 grade combines a wear-resistant surface with a tough substrate to extend edge life during continuous turning. This CVD-coated carbide formulation is optimised for higher cutting speeds in stable set-ups, which reduces the frequency of index changes and supports a smoother production flow. For operations focused on steel machining, the coating improves thermal stability and abrasion resistance, thereby lowering tooling costs per component and increasing uptime. ISO compatibility and secure clamping for reliable set-up Designed as an ISO-standard indexable insert, the component is dimensioned and toleranced for straightforward integration into established holder systems. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening type, size and thickness, all of which are standardised for this model series. The cylindrical hole and double-sided construction allow economical use of the insert, and the 80° rhombic geometry supports both external and internal turning, enabling versatile application across common turning tasks. Edge geometry that improves process stability The 1.6 mm corner radius delivers strengthened cutting edges that resist chipping under steady radial engagement and contribute to consistent surface finish. Combined with a double-sided layout and a plate thickness of 4.76 mm, the insert offers mechanical robustness for interrupted cuts and heavier feeds where edge security is crucial. Selection of the appropriate chipbreaker and grade should be matched to workpiece material and machine rigidity to ensure optimal chip control and to avoid built-up edge. System approach and practical application advice This insert is intended to be used as part of a system: ISO indexable insert, a compatible external holder or boring bar, a support shim/clamp set and replacement screws. Typical tasks include both roughing and finishing in steel, where stable conditions and correct holder rigidity unlock the full potential of the grade. By selecting the correct chipbreaker and adhering to suggested cut parameters, process reliability improves and machining cycles become more predictable, delivering measurable gains in productivity and repeatability. For tailored cutting-data recommendations or to request availability of the CNMG120416 T9205 from Tungaloy, contact Metav Werkzeuge for expert advice and fast processing at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6785684 Manufacturer SKU: TUN6785684 SKU: 6785684-Tungaloy Manufacturer article number: 6785684 Core measurements Plate designation: CNMG120416 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Design and special features Material: carbide (cemented carbide) Coating/grade: T9205, CVD-coated carbide Plate form: rhombic (80°) Hole: with cylindrical hole Chipbreaker: double-sided Application: external and internal turning; ISO-standard indexable insert FAQ What materials is this insert suited for? The Tungaloy CNMG120416 T9205 insert is intended primarily for machining steel in stable conditions; the grade and CVD-coated carbide construction favour abrasive and thermal resistance required for higher cutting speeds. Can the insert be used on both internal and external turning operations? Yes, the 80° rhombic geometry and the double-sided design make the insert suitable for both external and internal turning when mounted in the appropriate holder. How is the insert fixed to the toolholder? The insert is mounted using the standard clamping arrangement that corresponds to its cylindrical hole and ISO form; compatibility is determined by holder form, fastening type, tolerance class, size and thickness. What benefit does the 1.6 mm corner radius provide? A 1.6 mm corner radius increases edge strength, reduces the risk of chipping under steady radial engagement and contributes to a consistent surface finish in medium to heavy turning. Are there recommendations for chipbreaker selection? Chipbreaker choice should be matched to the workpiece material, machining type and machine rigidity; the plate supports double-sided chipbreaker options to balance chip control and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated, wear-resistant carbide grade and a stable rhombic geometry for efficient, repeatable turning. The double-sided chipbreaker and ISO compatibility ensure reliable chip control and fast insert changes — order directly via Metav Werkzeuge or consult our technical team for optimal holder matching. CNMG120416 T9205 ISO turning insert for turning — Tungaloy The CNMG120416 T9205 is an ISO-conforming rhombic turning insert designed for productive external and internal turning of steel under stable machining conditions. CNMG ISO insert, stable geometry CVD-coated T9205 for wear resistance Double-sided chipbreaker for consistent chips Rhombic 80° form with 1.6 mm nose radius Higher productivity through wear-resistant coating and optimised grade The combination of a CVD-coated surface and a wear-resistant carbide substrate in grade T9205 offers extended tool life in repetitive turning operations on steel. The coating reduces flank and crater wear at elevated cutting speeds, which translates into fewer indexings and less downtime for insert changes. For production environments seeking predictable performance, the insert’s material specification supports stable machining windows and contributes to consistent part quality. The grade is intended for productive turning where process stability and chip control are achievable. Predictable clamping and geometry for consistent results The rhombic, 80° insert geometry with a 1.6 mm corner radius and a plate thickness of 4.76 mm provides a robust cutting edge that resists edge chipping in moderate interrupted cuts and steady finishing passes. The insert is ISO-conforming, so compatibility with holders is governed by form, clearance angle (0°), tolerance class, fastening method, size and thickness. The insert’s cylindrical hole enables secure clamping with standard screws and shims, ensuring repeatable seating and concentricity when mounted in suitable ISO toolholders. Reliable chip control and system guidance for workshop efficiency Equipped with a double-sided chipbreaker, the insert supports stable chip formation across a range of feeds and depths, improving evacuation and reducing the risk of built-up edge. Selection of the appropriate chipbreaker and cutting data should follow the workpiece material, machining strategy and machine-tool rigidity. The cutting system comprises the insert, a matching external holder or boring bar, a shim/clamping set and replacement screws; matching these components ensures secure assembly and fewer changeovers. For tailored recommendations on holder selection and cutting parameters, the technical consultants at Metav Werkzeuge can assist with practical guidance. For application-specific advice and fast supply of Tungaloy CNMG120416 T9205 inserts, contact Metav Werkzeuge — our consultants provide holder matching and availability details to optimise turning performance. Technical Data Article number: 6785699 Manufacturer SKU: TUN6785699 Model series: ISO turning indexable inserts Core figures Corner radius: 1.6 mm Plate size: 12 mm Plate thickness: 4.76 mm Geometry angle: 80° Clearance angle: 0° Hole style: cylindrical hole Design and special features Material: carbide Grade/coating: T9205, CVD-coated carbide Shape: rhombic Chipbreaker: double-sided Application: turning (external and internal) System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert designed for? The CNMG120416 T9205 insert is specified for productive turning of steel; the T9205 grade and CVD coating favour wear resistance during higher cutting speeds under stable conditions. Which insert geometry and clamping details apply? This is a rhombic 80° insert with a 1.6 mm corner radius, 4.76 mm thickness and a cylindrical hole for standard ISO-compatible clamping systems. How does the double-sided chipbreaker benefit machining? The double-sided chipbreaker promotes consistent chip formation across varying feeds, improving evacuation and reducing the risk of built-up edge when machining under appropriate stability. Is the insert indexable and reversible? The indexable CNMG120416 insert is double-sided to extend usable edge life and facilitate economical index changes in production settings. Which holders are compatible with this insert? Compatible holders are ISO-standard external holders or boring bars that match the insert form, clearance angle, tolerance class, fastening method, size and thickness. When should a different chipbreaker or grade be chosen? If machining unstable setups, hard or exotic alloys, or when finishing at very low feeds, selecting a different chipbreaker geometry or a grade tailored to that application will provide better performance and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com