CNMG 120416 T9205 Wendeplatten - Tungaloy
Benefit from a wear‑resistant CVD‑coated carbide T9205 grade combined with ISO CNMG geometry for reliable, high‑speed turning and stable chip formation; order original inserts via Metav Werkzeuge or consult our specialists for application support. CNMG120416 T9205 CNMG turning insert by Tungaloy — CVD‑coated carbide, 80° rhombic The CNMG120416 T9205 is an ISO‑standard, CVD‑coated carbide insert engineered for productive external and internal turning in stable machining conditions. ISO CNMG geometry, rhombic 80° CVD-coated carbide grade T9205 Corner radius 1.6 mm for robust cuts Double-sided chipbreaker, cylindrical hole High‑speed, wear‑resistant performance for turning The insert delivers defined performance through its CVD‑coated carbide substrate and T9205 grade, optimised for productive turning of steel at higher cutting speeds. The combination of coating and substrate increases wear resistance and supports consistent edge life, which reduces downtime for tool changes. As a consequence, machining cycles can be run more predictably and surface quality is easier to maintain. Specification and geometry follow ISO norms to ensure repeatable behaviour in production environments. Secure clamping and versatile geometry for reliable set‑ups Compatibility with toolholders is determined by form, clearance, tolerance class, attachment, size and thickness; the rhombic 80° shape and the cylindrical hole provide secure clamping and orientation in standard CNMG holders or compatible boring bars. The 0° relief enables particular insert orientations for facing and profiling, while a thickness of 4.76 mm adds rigidity to the cutting edge. These factors together reduce vibration and improve repeatability, turning a single insert into a dependable element of a robust tooling system. Practical selection and machining advantages The double‑sided chipbreaker and a 1.6 mm corner radius are balanced for medium to heavy cuts where chip control and insert life are priorities. Selecting this grade and chipbreaker is advisable where stable cutting conditions exist; if lower stability or interrupted cuts are expected, choosing a smaller radius or different breaker is recommended. The insert’s geometry supports both external and internal operations, and its dimensions make it suitable for standard turning programmes where a compromise between edge strength and finish is required. Quality assurance and system integration Each insert is part of a modular system comprising the ISO insert itself, a matching external holder or boring bar, an insert seat/clamping set and replacement screws; correct assembly ensures the CNMG120416 performs to its specification. The manufacturer article number and SKU identify original Tungaloy production, supporting traceability and consistent batch quality. Where machining tasks demand controlled chip formation, longer tool life and reproducible results, this grade and form offer an economical route to improved process stability. For tailored application advice or to order genuine Tungaloy CNMG120416 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team is available to advise on holder compatibility and optimal cutting parameters. Technical data Article number: 6785692 Manufacturer SKU: TUN6785692 SKU: 6785692-Tungaloy Model series: ISO turning inserts ISO designation: CNMG120416 Facts Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 80° Corner radius: 1.6 mm Hole: with cylindrical hole Special features Material: carbide Coating/grade: T9205 (CVD‑coated) Chipbreaker: double-sided Shape: rhombic Application: Turning System assembly: insert, matching external holder or boring bar, clamping set and replacement screws FAQ What materials is this insert suited for? The Tungaloy CNMG120416 T9205 insert is designed primarily for machining steel under stable conditions; the CVD‑coated T9205 grade supports wear resistance at elevated cutting speeds. Which chipbreaker and corner radius are fitted? This insert features a double‑sided chipbreaker and a 1.6 mm corner radius, optimised for robust cutting and controlled chip formation in conventional turning tasks. How does the 80° rhombic shape influence machining? An 80° included angle gives versatility for both external and internal turning, allowing effective access to workpiece features while maintaining edge strength. Is the insert compatible with standard CNMG holders? The insert follows ISO CNMG geometry (CNMG120416), and compatibility depends on holder form, clearance angle, tolerance class, attachment and thickness; proper matching ensures secure clamping. What identifiers confirm genuine Tungaloy product? Original inserts can be identified by the manufacturer article number 6785692 and manufacturer SKU TUN6785692, which correspond to the Tungaloy CNMG120416 T9205 production run. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide grade that combines high wear resistance with proven fracture toughness, ensuring long tool life and stable productivity. The ISO‑standard geometry simplifies integration with standard holders and reduces setup times. Order directly via Metav Werkzeuge or contact our consultants for tailored recommendations. CNMG 120416 T9215 turning insert by Tungaloy — CVD-coated carbide for medium-steel turning The CNMG120416 T9215 is an ISO‑standard turning insert designed for external and internal turning, offering a rhombic 80° profile and a 0° clearance angle for stable cutting. CVD-coated carbide for extended tool life ISO‑standard CNMG120416 geometry Double-sided chipbreaker for versatile turning Rhombic 80° profile with cylindrical hole Reliable productivity for medium-steel turning The T9215 grade is engineered as a first choice for medium steel machining, combining high wear resistance with dependable fracture toughness. This balance allows for productive turning in continuous to slightly interrupted cuts, reducing the frequency of tool changes and supporting longer uninterrupted runs. The result is a measurable increase in machine uptime and a lower cost per part when used in serial production or batch processing. Faster setup through ISO compatibility and stable geometry Thanks to the ISO‑standard CNMG form, the insert mates predictably with common external holders and boring bars; compatibility depends on matching form, clearance, tolerance class, fastening, size and thickness. The rhombic shape and 80° included angle give consistent cutting kinematics, while the 0° clearance supports precise axial positioning. Together, these features simplify tooling decisions and shorten the time required to bring a machine into full production. Effective chip control for improved surface quality A double-sided chipbreaker and a cylindrical locating hole ensure repeatable chip formation and evacuation. The insert’s 1.6 mm corner radius supports a good compromise between strength and finish, and the robust 4.76 mm plate thickness contributes to edge stability under load. Improved chip control leads to better surface finish and fewer secondary operations, which benefits throughput and overall process reliability. Coating and substrate engineered for long tool life A CVD-coated carbide substrate provides a hard, wear‑resistant surface layer bonded to a tough core, giving a combination of abrasion resistance and impact tolerance. This engineering reduces flank wear and maintains edge integrity across shifting cutting conditions. When integrated into a complete system — insert, compatible holder, clamping set and replacement screws — the result is a predictable, repeatable turning process that supports high productivity and consistent component quality. For application advice on the CNMG 120416 T9215 from Tungaloy or to verify fitment in a specific holder, contact Metav Werkzeuge – email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, practice‑oriented support Technical data Article number: 6796068 SKU: 6796068-Tungaloy Manufacturer SKU: TUN6796068 Facts Radius: 1.6 mm Plate thickness: 4.76 mm Insert size: 12 Clearance angle: 0° Included angle: 80° Special features Coating: CVD-coated carbide Grade: T9215 Insert form: rhombic Hole style: cylindrical Chipbreaker: double-sided Application: turning FAQ What materials is the CNMG120416 T9215 suited for? The CNMG120416 T9215 turning insert from Tungaloy is optimised for medium steel machining, delivering high wear resistance and good edge security for continuous to slightly interrupted cuts. Is the insert indexable and reversible? Yes, the CNMG120416 T9215 is double-sided and indexable, allowing the use of multiple cutting edges before replacement and providing economical edge utilisation. How is compatibility with toolholders determined? Compatibility for the CNMG120416 T9215 is determined by matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the chosen holder. What does the CVD coating provide? The CVD-coated carbide of the CNMG120416 T9215 offers a hard wear-resistant surface and a tough substrate, improving flank wear resistance and resistance to edge chipping under typical turning conditions. Which turning operations are suitable for this insert? The CNMG120416 T9215 is designed for external and internal turning operations where medium steel is machined and where a balance of productivity and surface quality is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance and a robust 80° rhombic geometry to keep turning cycles consistent and trouble-free; the double-sided design and central hole ensure quick index changes and dependable clamping. Order directly via Metav Werkzeuge or request specialist advice for optimal chipbreaker and holder pairing. CNMG 120416 T9215 indexable insert for turning — Tungaloy A CNMG120416 T9215 indexable insert designed for precision external and internal turning in medium steel applications, delivering high wear resistance and reliable performance in continuous to mildly interrupted cuts. CVD-coated carbide T9215 for medium steel Rhombic 80° geometry, 1.6 mm corner radius Double-sided insert with central cylindrical hole ISO CNMG120416 form for broad holder compatibility Consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 combines enhanced surface hardness with fracture resistance, making it particularly suited to medium steel machining where a balance of tool life and process stability is required. With its engineered coating, abrasion is reduced and flank wear slows, which translates into longer uninterrupted production runs and fewer tool changes. The result is improved productivity and lower per-part tooling effort during continuous or slightly interrupted turning cycles. The coating system provides a protective layer that reduces thermal and mechanical degradation at the cutting edge, enabling higher cutting speeds compared with uncoated grades while maintaining dimensional consistency. Secure clamping and predictable tool life for reliable set-ups The 80° rhombic geometry with a 1.6 mm corner radius supports robust edge strength and predictable cutting forces, which helps to stabilise component finishes and reduce chatter in less rigid set-ups. Compatibility with holders is determined by insert form, relief angle and tolerance class; the ISO CNMG120416 shape and the central hole allow secure fixing in standard CNMG holders and toolposts. The double-sided design doubles usable edges per insert, offering economical use of carbide while maintaining consistent cutting performance across each index. This predictable behaviour simplifies process planning and reduces downtime associated with unexpected insert failures. Practical handling and application guidance for day-to-day workshops Handling and implementation are straightforward: the rhombic insert shape, combined with the standardised dimensions and thickness, allows fast replacement and minimal requalification of the tool assembly. Select a chipbreaker and insert grade that match material, cut type and machine stability to maximise tool life and surface quality; the double-sided chipbreaker offers versatility across a range of feeds and depths of cut. For operations requiring fine finishes, the stable cutting edge and CVD protection support lower surface roughness without sacrificing productivity. If uncertainty remains about the ideal chipbreaker or holder combination for a specific job, technical consultation is available to match the insert to the process parameters. For tailored guidance on integrating the Tungaloy CNMG120416 T9215 indexable insert into production, contact Metav Werkzeuge for application advice and availability — Metav Werkzeuge provides prompt technical support and product supply. Technical data Article number: 6773874 Manufacturer SKU: TUN6773874 SKU: 6773874-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: CNMG120416 Grade / coating: T9215 (CVD-coated) Included angle: 80° Corner radius: 1.6 mm Thickness: 4.76 mm Insert size: 12 mm Special features Rhombic insert form Double-sided chipbreaker Central cylindrical hole ISO CNMG form for standard holders Suitable for external and internal turning Optimised for medium steel machining FAQ What materials is this insert best suited for? The CNMG120416 T9215 indexable insert is optimised for medium steel machining; the T9215 CVD-coated carbide provides high wear resistance and good fracture toughness for such materials. Can the insert be used in interrupted cuts? Yes, the T9215 grade and the robust 80° rhombic geometry make the insert suitable for continuous to lightly interrupted turning operations, offering reliable edge stability. How many cutting edges are available per insert? Due to the double-sided configuration, the insert provides multiple usable edges; the exact count depends on indexation practice, but the design effectively doubles service life versus single-sided types. Is the CNMG120416 compatible with standard CNMG holders? The ISO CNMG120416 form and the central hole enable compatibility with standard CNMG external and internal turning holders, subject to matching tolerance class and relief angle. What benefits does the CVD coating provide in practical use? The CVD coating on the T9215 grade increases thermal and abrasive resistance, leading to reduced flank wear and longer tool life, which supports higher cutting speeds and improved process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9215 with a robust 80° CNMG geometry and a 1.6 mm corner radius yields reliable wear resistance and process stability for medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for holder and grade selection. CNMG 120416 T9215 Tungaloy turning insert — ISO CNMG, 80° rhombic, CVD-coated carbide The CNMG120416 T9215 is an ISO-standard turning insert designed for external and internal turning of medium steels, offering a balanced combination of wear resistance, fracture safety and suitability for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 for medium steel ISO rhombic insert CNMG 80° geometry 1.6 mm corner radius for stable cutting Double-sided chipbreaker with cylindrical hole Faster, more consistent metal removal for medium-steel turning The CVD-coated carbide grade T9215 provides a high level of wear resistance while retaining sufficient toughness to avoid premature chipping under continuous or slightly interrupted cuts. The coating reduces flank and crater wear and extends effective edge life, which translates into improved operating efficiency and longer tool change intervals. For production environments where cycle time and repeatability matter, this specification supports higher metal removal rates and consistent component quality without sacrificing process reliability. Secure seating and broad compatibility with ISO holder systems As an ISO-design insert, compatibility with clamping systems is governed by shape, clearance angle, tolerance class, fastening, size and thickness. The rhombic 80° geometry confers mechanical strength and application versatility, while the cylindrical hole ensures positive locating and secure clamping in standard CNMG holders. Typical system components include the appropriate external holder or boring bar, a shim or clamping set and spare screws; selecting matched components reduces setup variance and improves overall process stability. Predictable surface finish and controlled chip formation The R1.6 corner radius and the double-sided chipbreaker are configured to support steady cutting forces and effective chip control, which together enhance final surface finish and reduce vibration. For medium-steel applications, this combination helps to maintain dimensional accuracy across long production runs and makes the insert suitable for both general turning and finish operations when machining conditions and rigidity are adequate. Selecting the correct chipbreaker and grade for the specific workpiece material and machine rigidity further optimises productivity. For tailored advice on holder compatibility or to order genuine Tungaloy inserts through Metav Werkzeuge, contact our application consultants — email info@metav-werkzeuge.com or call +49 2822 7131930 for swift, practice-oriented recommendations Technical Data Article number: 6772183 Manufacturer SKU: TUN6772183 SKU: 6772183-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Corner radius: 1.6 mm Insert thickness: 4.76 mm Inscribed circle size: 12 mm Approach angle: 80° Clearance angle: 0° Special features Carbide with CVD coating, grade T9215 Double-sided, rhombic CNMG geometry Cylindrical hole for secure locating Double-sided chipbreaker Suitable for external and internal turning Recommended for continuous to light interrupted cuts FAQ Which materials are best suited to this insert? The CNMG120416 T9215 turning insert is optimised for medium steel machining; the T9215 grade balances wear resistance and toughness for productive turning of such materials. How many usable cutting edges does the insert provide? Being double-sided and rhombic, the insert offers multiple indexable edges; the CNMG120416 Tungaloy insert (SKU 6772183-Tungaloy) is designed for economical indexing and extended tool life. What does the 80° geometry mean for operation? The 80° approach angle increases edge strength and stability, making the insert suitable for general turning tasks where robustness and versatility are required. Is the insert compatible with standard CNMG holders? Yes — as an ISO CNMG insert, compatibility depends on matching shape, size, thickness and fastening; secure clamping is supported by the cylindrical locating hole. When should a different chipbreaker or grade be chosen? If the application involves heavy interruptions, exotic alloys or very high cutting speeds, a different chipbreaker or grade should be selected to match rigidity and thermal demands; the T9215 grade suits continuous to lightly interrupted medium-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that pairs high wear resistance with fracture toughness for productive turning in medium steels; the rhombic, double-sided design and cylindrical hole ensure secure clamping and economical indexability. Order the inserts directly via Metav Werkzeuge or consult our specialists for cutting-parameter advice. CNMG 120416 T9215 CNMG turning insert by Tungaloy — CVD-coated carbide, 1.6 mm nose radius CNMG120416 T9215 is an ISO-standard rhombic turning insert designed for external and internal turning in medium steel applications, combining robust wear resistance with stable chip formation ISO rhombic CNMG form CVD-coated carbide grade T9215 Double-sided insert for economical indexing Cylindrical hole for secure clamping High productivity through wear-resistant CVD-coated carbide The first priority for efficient series turning is predictable tool life. The CVD-coated carbide T9215 offers a balance of high wear resistance and fracture toughness that supports longer tool life in continuous and lightly interrupted cuts. This behaviour reduces downtime for index changes and contributes directly to production-rate stability. The combination of coating and substrate allows for consistent edge condition over extended component runs, improving process economy in medium steel machining. Secure mounting and proven ISO compatibility reduce set-up time Compatibility with tooling systems is governed by geometry and tolerances. The ISO rhombic insert form, cylindrical hole, and standard dimensions simplify selection of a matching external holder or boring bar: form, clearance angle, tolerance class, fastening method, size and thickness determine fit. The double-sided geometry gives two cutting edges per pocket, lowering consumable cost per edge and ensuring rapid, repeatable tool indexation. The 0° clearance angle and 4.76 mm thickness contribute to stable seating and reduced chatter when the correct holder is used. Application guidance for reliable component quality This grade is optimised for turning of medium steel in continuous to light interrupted cutting conditions and is suitable for both external and internal operations. The 1.6 mm nose radius supports robust edge strength for general-purpose profiling while maintaining acceptable surface finish; for finer finishes, smaller radii should be considered. Selecting the matching chipbreaker and adapting speeds and feeds to the workpiece rigidity will yield the best balance between throughput and component quality, while the insert’s toughness helps resist edge chipping under variable cutting loads. Contact Metav Werkzeuge for tailored recommendations on cutting data and compatible holders for Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange specification support and fast supply. Technical data Article number: 6944564 Manufacturer SKU: TUN6944564 SKU: 6944564-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: CNMG120416 Grade: T9215 Material: Hartmetall Key dimensions Size: 12 mm Thickness: 4.76 mm Nose radius: 1.6 mm Clearance angle: 0° Included angle: 80° Special features CVD-coated carbide grade T9215 Double-sided chipbreaker Rhombic insert shape With cylindrical hole (for screw clamping) Intended for turning (external and internal) First choice for medium steel machining Compatible with ISO holders depending on form and tolerance FAQ What workpiece materials suit this insert best? This insert in grade T9215 is optimised for medium steels; the CVD-coated carbide provides wear resistance and toughness for continuous to light interrupted turns. How is the insert mounted in the tool holder? The rhombic CNMG geometry with a cylindrical hole requires a compatible ISO external holder or boring bar; compatibility depends on form, clearance, tolerance class, fastening, size and thickness. What cutting conditions are recommended for longest tool life? For the T9215 grade, stable setups with continuous cuts or only light interruptions deliver the best tool life; adjust speed and feed to workpiece rigidity and choose the appropriate chipbreaker. How many effective cutting edges does the insert provide? The double-sided configuration offers two usable edges per side, enabling economical indexing and reduced consumable costs. Is this insert suitable for interrupted cuts or unstable setups? It is suitable for light interruptions thanks to its fracture-resistant substrate, but heavy interruptions or unstable setups may require a tougher geometry or different grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable chip control and ISO compatibility for smooth turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. CNMG 120416 T9215 — Indexable insert for turning, Tungaloy CNMG120416 T9215 is an ISO-design indexable insert for turning, designed for medium steel machining and suitable for external and internal operations CVD-coated cemented carbide grade T9215 Designed for medium steel machining 80° rhombic geometry with 0° relief Double-sided chipbreaker with cylindrical hole Consistent productivity for medium-steel turning The T9215 grade combines CVD coating and a cemented carbide substrate to deliver extended tool life and consistent cutting performance in medium steel. This pairing improves resistance to abrasive wear while maintaining edge toughness, which translates into fewer insert changes and higher throughput. Specifying an insert with such wear properties supports steady production runs and predictable tool-change intervals, improving machine uptime and lowering overall machining costs. Straightforward compatibility with ISO holders reduces set-up time The ISO designation ensures that the insert fits standard tooling systems when the holder matches form, relief angle, tolerance class, fastening, size and thickness. The 80° rhombic geometry and 0° relief are common in many external and internal turning holders, enabling fast changeovers and reduced inventory complexity. Clear conformity to ISO standards aids procurement and tool management, allowing straightforward integration into existing workflows without additional adapter parts. Predictable chip control and improved surface finish The insert’s double-sided chipbreaker and 1.6 mm corner radius provide controlled chip formation for typical turning tasks, supporting a consistent surface finish and stable machining, even under varying cutting conditions. The rhombic profile with a cylindrical hole secures reliable clamping and positional repeatability; this mechanical stability reduces vibration and contributes to repeatable component quality in both serial production and single-part manufacturing. Practical selection guidance for workshop application Select the chipbreaker and grade according to workpiece material, cutting strategy and setup rigidity: the Tungaloy T9215 grade is optimised for continuous to lightly interrupted cuts in medium steel and is particularly effective where high productivity and dependable wear performance are required. For internal turning or less rigid set-ups, consider reduced depth of cut or conservative feeds to preserve edge life. If clarification on the best chipbreaker or holder pairing is needed, our technical team can recommend the correct configuration based on the specific machining scenario. Contact Metav Werkzeuge today to order the Tungaloy CNMG 120416 T9215 indexable insert or to request tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772200 Manufacturer SKU: TUN6772200 SKU: 6772200-Tungaloy Model series: ISO turning indexable inserts ISO designation: CNMG120416 Material: Cemented carbide Core data Corner radius: 1.6 mm Plate size: 12 mm Thickness: 4.76 mm Relief angle: 0° Insert angle: 80° With hole: yes Hole style: cylindrical hole Special features Grade: T9215 Coating: CVD Chipbreaker: double-sided Geometry: rhombic Application: Turning Typical use: external and internal turning Compatibility: ISO-standard insert dimensions and form FAQ What materials is this insert optimised for? The CNMG120416 T9215 indexable insert from Tungaloy is optimised for medium steel machining, offering a balance of wear resistance and fracture toughness for productive cutting. Is the insert suitable for interrupted cuts? The T9215 grade is intended for continuous to lightly interrupted cuts; for heavy interruptions, a different grade or more robust cutting strategy is recommended. Which holders are compatible with this insert? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the CNMG120416 fits holders designed for the CNMG profile and ISO-standard dimensions. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when the correct holder geometry and chip control are applied. How does the double-sided chipbreaker help in production? A double-sided chipbreaker offers balanced chip control and cost efficiency by allowing both sides to be used, extending useful insert life and maintaining consistent chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance, the 1.6 mm corner radius for controlled cutting engagement and the double-sided chipbreaker for extended tool life to keep turning operations productive and consistent; order the CNMG indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG120416 T9215 indexable turning insert — CVD-coated carbide, 80° rhombic, Tungaloy The CNMG120416 T9215 is a rhombic ISO indexable insert designed for general turning applications, offering a CVD-coated carbide grade tailored to medium steel machining and reliable performance in continuous to slightly interrupted cuts. CVD-coated carbide for wear resistance ISO CNMG form for standard toolholders Double-sided chipbreaker for versatile cuts 1.6 mm corner radius for secure engagement High productivity through a wear-resistant grade The selection of a CVD-coated carbide grade, designated T9215, translates into consistently high wear resistance combined with fracture toughness, making it a sensible choice for medium steel turning where productivity matters. This coating technology forms a hard, adherent layer that reduces flank wear and improves edge life under continuous cutting conditions. As a result, the insert supports longer tool intervals and steadier surface finish outcomes, contributing to reduced downtime and a more predictable production rhythm. Geometry engineered for compatibility and stability The rhombic CNMG geometry with an included angle of 80° and a clearance angle of 0° is a widely accepted standard, ensuring compatibility with many ISO-compliant holders and boring bars. Key dimensional data such as the inscribed circle size of 12 mm, a plate thickness of 4.76 mm and a corner radius of 1.6 mm combine to provide a stable contact area and dependable edge strength. The presence of a cylindrical central hole facilitates secure clamping and precise seating in the pocket, which reduces vibration and promotes repeatable cutting performance across batches. Process reliability and efficient chip control The insert’s double-sided chipbreaker provides two active cutting edges per side, doubling the usable life compared with single-sided designs and enabling economical indexing. The chip geometry has been optimised for medium steel, supporting effective chip segmentation and evacuation under typical cutting parameters. In practical terms, this reduces the likelihood of built-up edge and improves surface quality. The Tungaloy grade balances chip control and edge stability, delivering consistent removal rates while maintaining surface integrity and tool life. Guidance for selection and safe use The insert forms part of an ISO-standard system that includes the insert, a suitable external holder or boring bar, a clamping wedge and replacement fasteners; compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness. For turning applications in medium-strength steels select the T9215 grade and the double-sided chipbreaker for routine finishing and semi-finishing operations. Ensure holders are correctly torqued and indexed at the first sign of wear; appropriate speeds and feeds for the grade will depend on machine stability and workpiece condition. Storage in a clean, dry environment and regular inspection of seating surfaces will aid consistent performance. Contact Metav Werkzeuge for tailored setup recommendations for Tungaloy CNMG inserts and to request availability or technical datasheets Technical Data Article number: 6773907 SKU: 6773907-Tungaloy Manufacturer SKU: TUN6773907 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: CNMG120416 Insert size: 12 Plate thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 80° Special features Grade/sort: T9215 Coating/type: CVD-coated carbide Chipbreaker: double-sided Hole: with hole — cylindrical hole Plate form: rhombic Typical application: Drehen FAQ What materials is this insert intended for? The CNMG120416 T9215 insert from Tungaloy is primarily intended for medium steel machining; the CVD-coated carbide grade T9215 combines wear resistance and toughness suited to continuous and slightly interrupted turning. How does the double-sided chipbreaker affect tool life? A double-sided chipbreaker increases usable cutting edges per insert and supports controlled chip formation, which enhances overall tool life and reduces the frequency of indexing for the CNMG120416 T9215. Is the insert compatible with standard CNMG holders? Yes, the CNMG120416 designation and dimensions such as 12 inscribed circle and 4.76 mm thickness make the insert compatible with ISO CNMG holders that match the form, tolerance and clamping specifications. What benefits does the T9215 grade provide in production? The T9215 CVD-coated carbide grade delivers a balance of high wear resistance and fracture toughness, improving process reliability and enabling higher uninterrupted cutting times in routine turning operations. Which features ensure stable seating and reduced vibration? The combination of the rhombic plate form, cylindrical central hole and standard thickness contributes to secure clamping and repeatable seating, which helps to reduce vibration and improve surface finish when using the CNMG120416 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 1.6 mm nose radius for edge strength and the reliable T9215 grade for efficient medium-steel turning; order directly via Metav Werkzeuge or request application advice from the consultants. CNMG 120416 T9215 Tungaloy insert for turning — CVD-coated carbide, 80° geometry CNMG 120416 T9215 is an ISO‑compliant turning insert designed for general external and internal turning, offering a balanced solution for medium‑strength steels. CVD-coated carbide for wear resistance 80° geometry for robust general turning Double-sided chipbreaker for consistent chips 1.6 mm nose radius for durable cutting edge Consistent productivity for medium‑steel turning The combination of CVD‑coated carbide and the T9215 grade provides a high level of wear resistance while maintaining reasonable fracture toughness, making this insert a dependable choice for continuous and slightly interrupted cuts in medium steels. The 80° geometry delivers a stable cutting attitude that reduces vibration in most roughing and finishing scenarios. Specified as an ISO indexable insert, the component fits into standard holders when form, clearance angle, tolerance class, fixing method, size and thickness match, simplifying integration into existing toolsets and ensuring consistent cycle times. Robust edge life and reliable chip control A 1.6 mm nose radius increases edge strength and contributes to predictable tool life under typical turning feeds. The insert is double‑sided with a built‑in chipbreaker that supports controlled chip formation across a range of cutting parameters; this reduces downtime related to chip management and helps protect workpiece surface quality. The CVD coating forms a hard barrier against abrasive wear, enabling longer cutting intervals and stable performance in industrial production environments where high productivity is required. Designed for easy selection and secure mounting Compatibility depends on insert shape, clearance angle (this insert uses a 0° clearance), tolerance class, fixing style and thickness (4.76 mm). The insert includes a cylindrical hole for positive locating and secure fastening in the clamping set, which supports repeatable positioning and simple replacement. Specified as an ISO rhombic plate (size 12) with a standard 80° lead, the format is widely available and makes matching holders straightforward. Selecting the correct chipbreaker and grade for the specific material and machining stability will maximise process security. Application benefits and operational considerations Intended primarily for turning operations in medium‑strength steels, this CVD‑coated carbide insert offers a pragmatic balance of wear resistance and breakage safety, supporting higher feed rates and extended machining campaigns. The two usable cutting edges per side extend utilisation before indexation, and the standardised format reduces inventory complexity. For operations with frequent interruptions, consider machining parameters that protect the cutting edge from mechanical shocks; for continuous cuts the insert achieves its best economy through prolonged, steady production. Contact Metav Werkzeuge for tailored cutting data and delivery options for the Tungaloy CNMG 120416 T9215 turning inserts Technical Data Manufacturer article number: 6774081 SKU: 6774081-Tungaloy Manufacturer SKU: TUN6774081 Model series: ISO turning inserts Facts Geometry angle: 80° Nose radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 12 Clearance angle: 0° Special features Coating: CVD Grade: T9215 Insert material: carbide Plate shape: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Typical application: turning (external and internal) ISO designation: CNMG120416 FAQ What materials is this insert best suited for? The CNMG 120416 T9215 insert is optimised for medium‑strength steel machining; the T9215 grade and CVD coating together provide wear resistance suitable for continuous to slightly interrupted turning. How does the 1.6 mm nose radius affect performance? A 1.6 mm nose radius increases edge robustness and supports higher feed rates with improved tool life for the CNMG 120416 T9215 turning insert. Is this insert reversible and how many cutting edges are usable? The insert is double‑sided, offering multiple usable cutting edges that extend service life before indexation. What must be considered for holder compatibility? Holder compatibility is determined by insert form, clearance angle (0°), tolerance class, fixing style, size and thickness; ensure matching specifications for secure mounting of the CNMG 120416 T9215. Does the insert have a locating hole and what type is it? Yes, the insert is supplied with a cylindrical locating hole for positive fixing in a suitable clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Benefit from high wear resistance, reliable fracture toughness and full ISO compatibility for efficient, high‑productivity turning processes. The combination of a CVD‑coated carbide grade and a stable chipbreaker reduces tool changes and supports consistent part quality—order directly via Metav Werkzeuge or consult our technical advisors for matching holders and clamping parts. CNMG 120416 T9215 indexable turning insert by Tungaloy — CVD‑coated carbide, 0° relief, 80° The CNMG 120416 T9215 is an ISO‑standard indexable insert designed for external and internal turning in medium steels, offering a balance of wear resistance and toughness for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 ISO CNMG120416 rhombic insert Double-sided chipbreaker, 1.6 mm nose radius Cylindrical hole, 0° clearance, 80° included angle Consistent productivity for medium‑steel turning The CVD‑coated carbide composition of the insert and the specially developed T9215 grade provide elevated wear resistance while retaining sufficient toughness to resist edge chipping. This makes the insert particularly suited to productive operations on medium steel, where a balance between tool life and secure cutting performance is required. The coating enhances thermal and chemical resistance at the cutting edge, allowing for steady material removal rates and fewer unscheduled tool changes. Reliable fit and system compatibility Produced to ISO dimensions, the insert ensures straightforward integration into existing tool systems. ISO form and tolerance standards determine compatibility by shape, relief angle, tolerance class, fixation, size and thickness. The plate thickness of 4.76 mm and the standard CNMG form facilitate secure clamping in appropriate outer holders or boring bars; the complete system includes the insert, a matching holder, underplate or clamping set and replacement screws. Specifying the correct holder geometry and clamping components preserves tool accuracy and repeatability. Geometry engineered for surface quality and chip control The rhombic plate form with an 80° included angle and a 1.6 mm nose radius produces a reliable blend of strength and surface finish. The double‑sided chipbreaker provides controlled chip formation for a range of cutting parameters, improving swarf evacuation and reducing heat concentration at the cutting edge. The cylindrical hole and 0° clearance contribute to rigid seating and even load distribution, advantages that translate into stable cuts and consistent component surfaces. Economic benefits through longer tool life and fewer interventions CVD coating together with the robust carbide substrate enables predictable wear progression and a longer average life per edge compared with uncoated grades. The insert’s design supports productive turning by allowing higher cutting volumes with fewer indexings, which reduces machine downtime and lowers total tooling cost per part. For operations aiming to increase throughput while maintaining component tolerances, this insert offers quantifiable process improvements and easier process planning. For high‑productivity turning with reliable tool life, contact Metav Werkzeuge for advice on selecting suitable holders and clamping sets for the Tungaloy CNMG 120416 T9215 insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772179 Manufacturer SKU: TUN6772179 Brand: Tungaloy Article name: CNMG120416 T9215 indexable insert Facts Corner radius: 1.6 mm Thickness: 4.76 mm Plate size: 12 mm Included angle: 80° Relief angle: 0° Special features Material: carbide Coating: CVD Grade: T9215 Plate form: rhombic Hole: cylindrical, with hole Chipbreaker: double-sided Application: turning (external and internal) Compatible system: ISO turning insert, holder, shim/clamp, replacement screws FAQ What materials is this insert designed for? The CNMG 120416 T9215 indexable insert by Tungaloy is optimised for medium steel machining and performs well in continuous to slightly interrupted turning operations. How does the T9215 grade affect machining performance? The T9215 grade combines wear resistance and fracture toughness; in the CNMG 120416 configuration it supports higher productivity with predictable tool life and reduced risk of edge failure. Which holder and clamping components are required? Compatibility is determined by ISO form, relief angle, tolerance class, fixation, size and thickness; the CNMG120416 insert is used with a matching outer holder or boring bar, underplate/clamping set and replacement screws. What geometry features improve surface finish and chip control? The rhombic shape with an 80° included angle, 1.6 mm nose radius and a double‑sided chipbreaker deliver controlled chip formation and stable cutting, helping to improve surface finish on turned parts. Is the insert reversible and how many cutting edges are available? The double‑sided design allows indexing to a fresh cutting edge; the CNMG geometry offers multiple usable edges per insert, extending effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control and straightforward indexability for uninterrupted production. Order the CNMG120416 T9215 insert directly via Metav Werkzeuge or consult the technical advisors for compatibility and stock information. CNMG 120416 T9215 Tungaloy turning insert — ISO turning insert, CVD-coated carbide A CNMG120416 T9215 indexable insert designed for external and internal turning, optimised for medium steel and productive continuous to slightly interrupted cuts. CVD-coated carbide for high wear resistance Optimised for medium steel and productive turning Double-sided chipbreaker with rhombic 80° geometry Cylindrical hole for secure, repeatable clamping Reliable performance for medium-steel turning operations The CVD-coated T9215 grade combines carbide substrate strength with a robust coating to deliver extended tool life under continuous and lightly interrupted cutting conditions. This grade is presented as a balance between wear resistance and fracture toughness, making it a solid choice when consistent cycle times and predictable tool changes are priorities. With this performance profile, the insert supports higher productivity by reducing unscheduled tool interventions and maintaining stable cutting behaviour across batches. Geometry and clamping that ensure repeatable stability The rhombic 80° geometry and the 1.6 mm corner radius contribute to a predictable cutting edge engagement and dimensional control during turning. The insert is manufactured with a 0° clearance and a cylindrical hole, enabling straightforward fixation in standard ISO-compatible holders and boring bars. The plate thickness of 4.76 mm and the ISO designation ensure that holder compatibility is determined by form, clearance angle, tolerance class, fastening style, size and thickness—factors that together guarantee repeatable seating and reduced vibration when the system is set up correctly. Shop-floor benefits: chip control and efficient tool economy Equipped with a double-sided chipbreaker, the indexable insert offers improved chip formation and evacuation, which translates into consistent surface finishes and safer swarf handling. The double-sided nature of the plate delivers an economic advantage: two usable cutting edges per indexation, helping to lower tooling costs per part. Stable chip control also reduces the risk of rework and supports longer uninterrupted runs, which is particularly valuable in batch production or lights-out machining scenarios. Integration guidance and system setup for reliable use Successful implementation requires matching the chipbreaker and grade to the workpiece material and machining dynamics. The recommended system setup comprises the ISO-standard insert, a compatible external holder or boring bar, a support shim or clamp set, and appropriate fastening screws. Correct selection of holder geometry and stability class mitigates chatter and unlocks the T9215 grade’s potential for productive machining of medium steel. For machining strategies involving interrupted cuts or variable rigidity, choose the chipbreaker and holder that prioritise edge security over maximum cut depth. Contact Metav Werkzeuge for tailored recommendations on holder compatibility, availability of the CNMG120416 T9215 insert and guidance on optimising cutting parameters for specific steel grades. Technical data Article number: 6774102 SKU: 6774102-Tungaloy Manufacturer SKU: TUN6774102 Facts Geometry angle: 80° Insert size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Special features Material: carbide Coating/grade: T9215 (CVD-coated) Shape: rhombic, CNMG Chipbreaker: double-sided Hole style: cylindrical hole Clearance angle: 0° Application: turning (external and internal) ISO series: ISO-turning inserts FAQ What materials is this grade best suited for? The T9215 grade on the CNMG120416 insert is optimised for medium steel and combines wear resistance with fracture toughness for productive turning. How is the insert secured in the holder? The insert features a cylindrical hole for clamping and is designed for ISO-compatible holders; the CNMG120416 geometry ensures repeatable seating and secure fixation when used with the correct clamp set. Can this insert be indexed for multiple edges? Yes, the CNMG120416 is double-sided and indexable, offering multiple usable cutting edges to improve tool economy and reduce tooling costs per part. What are the key dimensions to check for holder compatibility? Important dimensions include the 12 mm insert size, 4.76 mm thickness and 1.6 mm corner radius; these must match the holder’s specifications for correct fit and seating. Is this insert suitable for interrupted cuts? The T9215 grade accommodates continuous to slightly interrupted cuts; for heavily interrupted machining, a different grade or reinforced clamping may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide geometry and a proven double‑sided chipbreaker to keep machining cycles steady and predictable; the CNMG120416 T9225 insert combines wear resistance, an ISO‑standard form and simple compatibility checks to support uninterrupted turning operations. Order the CNMG120416 T9225 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. CNMG120416 T9225 Tungaloy indexable insert for turning — CVD‑coated carbide, 80° rhombic A CNMG120416 T9225 indexable insert engineered for medium‑to‑heavy steel turning, suitable for both external and internal operations where stability and chip control are required CVD‑coated carbide for robust performance Universal T9225 grade for medium–heavy steel Rhombic CNMG geometry, 80° included angle Double‑sided chipbreaker, cylindrical hole design Consistent cutting performance under variable conditions The CVD‑coated carbide construction delivers wear resistance and thermal stability, which translates into longer cutting life in interrupted and varying engagement scenarios. The T9225 grade is formulated as a robust universal option for medium‑to‑heavy steel turning, offering a balance of toughness and hardness that reduces flank wear and diminishes the frequency of insert changes. The double‑edged layout inherent in this geometry further extends productive life by providing two usable cutting edges per insert, lowering tooling costs per component. Precision geometry for predictable setup and compatibility The rhombic CNMG form with an 80° included angle and 0° clearance is designed for broad holder compatibility; tool matching depends on form, free angle, tolerance class, clamping and plate thickness. The insert’s corner radius 1.6 mm and 4.76 mm plate thickness contribute to stable engagement and predictable surface finish in profile and plunge cuts. A cylindrical hole allows secure clamping with standard screws and underlays, simplifying changeover and ensuring repeatable positioning in ISO‑compliant toolholders. Shop‑floor benefits: chip control, versatility and system clarity Built‑in chip control via the double‑sided chipbreaker improves evacuation in both external and internal turning, lowering the risk of re‑cutting and surface damage. As part of an ISO insert system, the component integrates with an external holder or boring bar, shim/clamp set and replacement screws, enabling consistent assembly across the toolroom. The combination of indexable functionality and an industrially proven coating supports efficient material removal and helps maintain throughput in production batches with mixed engagement conditions. For reliable medium‑to‑heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge to place an order or request application guidance; our team can advise on holder compatibility and optimal cutting data Technical data Article number: 6780893 Manufacturer SKU: TUN6780893 Model series: ISO‑turning indexable inserts Designation: CNMG120416 Manufacturer: Tungaloy Material: carbide Facts Plate size: 12 Plate thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features Coating: CVD‑coated Grade: T9225 (robust universal for steel) Geometry: rhombic CNMG form Chipbreaker: double‑sided Application: external and internal turning System components: ISO insert, compatible holder or boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert suited for? The CNMG120416 T9225 insert is specified for medium‑to‑heavy steel turning; the T9225 grade provides toughness for variable engagement and lightly interrupted cuts. How does the CVD coating affect tool life? The CVD‑coated carbide surface reduces abrasive wear and increases heat resistance, which improves the service life of the insert under sustained cutting conditions. Is the insert compatible with standard CNMG toolholders? Yes — the CNMG120416 geometry conforms to ISO form standards; compatibility depends on holder form, relief angle, tolerance class, clamping method and plate thickness. What advantage does the double‑sided chipbreaker provide? The double‑sided chipbreaker offers improved chip control and two usable cutting edges per indexable insert, raising operational efficiency and reducing tooling costs per part. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD-coated carbide and the versatile T9225 grade that delivers stable chip control and reliable edge life in medium-to-heavy steel turning; the rhombic 80° form with 1.6 mm corner radius and a double-sided chipbreaker supports consistent productivity. Order the CNMG120416 T9225 turning insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG 120416 T9225 Turning Insert for Turning by Tungaloy CNMG120416 T9225 is an ISO-compatible indexable insert designed for turning, offering a robust universal grade and controlled chip flow for variable engagement and slightly interrupted cuts CVD-coated cemented carbide T9225 grade Double-sided chipbreaker for chip control 80° rhombic form with 1.6 mm corner radius Cylindrical hole and 0° clearance for stable clamping Stable productivity for medium-to-heavy steel turning The CNMG120416 insert combines a CVD-coated carbide substrate with the T9225 grade to balance toughness and wear resistance for demanding turning operations. The double-sided chipbreaker eases chip evacuation and reduces the risk of built-up edge during variable engagement, which supports steady cycle times and fewer interruptions. For workshops machining medium-to-heavy steel, this geometry helps maintain consistent dimensional control and surface finish while tolerating slight interruptions or changing cut depths. Geometry and edge security for repeatable results The 80° rhombic form with 0° clearance and a 1.6 mm corner radius provides an advantageous contact angle for external and internal turning where edge strength and load distribution matter. The cylindrical hole ensures secure fastening in compatible holders, while the 4.76 mm thickness contributes to mechanical stability under higher cutting forces. These combined features reduce the need for constant tool changes and support predictable tool-life planning, improving overall process reliability. System compatibility and practical handling in production As an ISO-design insert, this component fits a wide range of standard turning holders and boring bars when holder geometry, clearance and tolerance class match. The insert’s universality makes it suitable for shops that require flexible tooling strategies across different steel grades and turning tasks. Clear labelling and the manufacturer SKU allow streamlined replenishment and inventory control, supporting supply-chain efficiency and quicker setup in serial production. Contact Metav Werkzeuge for tailored application advice on Tungaloy CNMG120416 T9225 inserts and to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781276 SKU: 6781276-Tungaloy Manufacturer SKU: TUN6781276 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core specifications Size (inscribed circle): 12 Corner radius: 1.6 mm Thickness: 4.76 mm Clearance angle: 0° Form angle: 80° Special features Material: cemented carbide Coating: CVD coating Grade: T9225 (robust universal grade) Chipbreaker: double-sided Hole: cylindrical hole, with hole Plate form: rhombic Application: turning, suitable for medium-to-heavy steel machining System: ISO-compatible turning insert FAQ What materials is this insert optimised for? The CNMG120416 T9225 insert is optimised for medium-to-heavy steel machining; the T9225 grade balances toughness and wear resistance for variable engagement conditions. How does the chipbreaker support machining? The double-sided chipbreaker integrated on the insert promotes controlled chip formation and evacuation, improving process stability during turning operations with varying cut conditions. Which holder types are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert is ISO-compatible for standard turning holders and boring bars when these parameters match. What does the 0° clearance mean in practice? A 0° clearance indicates minimal relief behind the cutting edge, which improves support under heavy loads and contributes to reliable edge life in demanding turning tasks. Is the insert suitable for interrupted cuts? Yes, the T9225 grade is designed for robustness and increased toughness, making it suitable for slightly interrupted cuts and changing engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide in grade T9225, the 80° rhombic geometry and a 1.6 mm corner radius to achieve reliable metal removal and longer edge life in medium-to-heavy turning operations; order directly via Metav Werkzeuge or consult our specialists for tailored machining advice. CNMG120416 T9225 CNMG ISO turning insert – CVD-coated cemented carbide, 80° rhombic, 1.6 mm radius · Tungaloy The CNMG120416 T9225 is an ISO rhombic turning insert engineered for robust medium-to-heavy steel turning, offering toughness for variable engagement and light interruptions. ISO‑standard rhombic geometry 80° CVD-coated cemented carbide grade T9225 1.6 mm corner radius for strength Double‑sided chipbreaker with hole Consistent cutting performance with a robust universal grade The combination of a CVD-coated surface and T9225 grade provides a balance of hardness and toughness suited to medium-to-heavy steel work. This composition promotes stable chip control and extended edge life under changing engagement conditions. The CVD coating reduces flank wear at elevated temperatures while the cemented carbide substrate maintains mechanical strength, making the insert a cost-effective option for productive runs where occasional interruptions occur. The overall effect is fewer tool changes and improved process efficiency in serial turning tasks. Quick integration into ISO tool systems and repeatable clamping Designed to ISO geometry, the insert matches holders when shape, relief angle, tolerance class, attachment, size and thickness align. The 0° relief angle, cylindrical hole and rhombic form simplify positioning and indexing in standard holders, while the 12 mm size and 4.76 mm thickness ensure dimensional stability. A system approach — insert, compatible external holder or boring bar, shim/clamp set and replacement screws — supports rapid changeovers and repeatable setup. The result is reduced setup time and predictable tool behaviour across shifts. Practical guidance for turning strategies and edge use For external and internal turning, select the double‑sided chipbreaker and a matching grade to suit material, operation and machine rigidity. The 1.6 mm corner radius increases edge strength and resists chipping in interrupted cuts, while the 80° included angle provides versatility for a range of diameters and profiles. Where finish is critical, moderate feeds and cooled cutting help exploit the coating’s wear resistance; where heavy stock removal is required, prioritise rigidity and stable clamping to maintain repeatable cutting conditions. Clear specification of the chipbreaker and grade helps avoid trial-and-error and shortens process qualification times. Contact Metav Werkzeuge for application recommendations and stock details of the CNMG120416 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781267 Manufacturer SKU: TUN6781267 Brand: Tungaloy Model series: ISO turning inserts Material: Cemented carbide Grade: T9225 Core specifications Insert designation: CNMG120416 ISO code: 120416 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Relief angle: 0° Included angle: 80° Hole: cylindrical hole Special features CVD-coated grade for toughness Double-sided chipbreaker Rhombic plate shape With hole for secure fixing Application: Turning Compatible system: ISO insert, holder, shim and screws FAQ What materials is this insert best suited to? The CNMG120416 T9225 insert is specified for medium-to-heavy steel machining; the T9225 grade and CVD coating give toughness and wear resistance suitable for variable engagement conditions. Can the insert handle interrupted cuts? Yes. The combination of the 1.6 mm corner radius and the T9225 grade provides additional edge strength for light to moderate interruptions during turning. How is the insert secured in the holder? The insert uses a cylindrical hole and standard ISO clamping arrangements; compatibility depends on matching form, relief angle, tolerance, attachment and thickness with the chosen holder. Is the chipbreaker reversible and indexable? The insert is double-sided with a chipbreaker on both faces, enabling indexing to a fresh edge and extending overall tool life. Which components complete the system for use on the lathe? A proper system includes the ISO insert, a compatible external holder or boring bar, an underlay/shim or clamp set and replacement screws to ensure stable clamping and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of reliable wear resistance, proven ISO compatibility and efficient chip control for uninterrupted turning operations; order the inserts directly via Metav Werkzeuge or consult the advisors for application-specific recommendations. CNMG120416 T9225 Tungaloy indexable turning insert — CVD-coated carbide, 80° rhombic geometry CNMG120416 T9225 Tungaloy indexable turning insert is an ISO-standard insert intended for general turning applications, engineered for medium to heavy steel machining where intermittent cuts or changing engagement demand increased toughness. ISO rhombic insert, 80° cutting geometry CVD-coated carbide grade T9225 Robust for medium to heavy steel machining Double-sided chipbreaker, with cylindrical hole Consistent cutting performance and longer service intervals The CNMG120416 T9225 insert combines a CVD-coated carbide substrate with a robust universal grade designed to withstand the thermal and mechanical loads typical of medium to heavy steel turning. The coating increases abrasive wear resistance while the grade offers the toughness required for slightly interrupted cuts, resulting in improved tool life and a more consistent surface finish. For production environments where downtime affects output, the result is a measurable gain in process stability and fewer unscheduled tool changes. ISO compatibility for straightforward holder selection and secure clamping Built to the ISO-standard model series, the insert’s 80° geometry and cylindrical hole ensure reliable seating in compatible turning holders. Compatibility is determined by form, 0° clearance angle, tolerance class, attachment method, size and thickness; matching these parameters reduces vibration and improves repeatability. The ISO conformity simplifies stocking and reduces the risk of pairing errors on the shop floor, so changeovers are quicker and fixture requirements are predictable. Controlled chips and efficient material removal The double-sided chipbreaker provides consistent chip formation across typical turning operations, aiding coolant penetration and evacuation. The insert’s design focuses on dependable chip control under varying engagement and stability conditions, which supports stable cutting and higher average cutting parameters. This translates into economical component machining and enhanced overall productivity without complex process adjustments. Practical selection advice and system considerations For turning applications, select the chipbreaker and grade according to workpiece material, cut depth and machine/fixture rigidity; the grade T9225 is tailored for robust, general-purpose steel machining where some toughness is required. Ensure holder matching by verifying the insert form, thickness (4.76 mm), and clamping arrangement; having compatible underplates, clamping sets and replacement screws completes the system and preserves seating accuracy. For unusual workpiece materials or highly interrupted cuts, consider alternatives with greater toughness or different chip formers to balance wear and edge security. Contact Metav Werkzeuge for availability of Tungaloy CNMG120416 T9225 inserts and tailored holder recommendations — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Manufacturer article number: 6781306 SKU: 6781306-Tungaloy Manufacturer SKU: TUN6781306 Model series: ISO turning inserts Facts Corner radius: 1.6 mm Insert size: 12 mm Thickness: 4.76 mm Relief angle: 0° Approach angle: 80° Special features Material: carbide Coating/grade: T9225 (CVD-coated) Double-sided chipbreaker Rhombic insert shape Cylindrical hole for secure clamping Application: turning ISO-series compatible FAQ Which materials is this insert best suited for? The CNMG120416 T9225 insert from Tungaloy is optimised for medium to heavy steel machining and performs well where slightly interrupted cuts or changing engagement require higher toughness. How does the T9225 coating improve performance? The CVD-coated carbide grade T9225 enhances wear resistance while maintaining edge toughness, which helps to extend the service life of the insert and stabilise the machining process. Is the insert compatible with standard ISO turning holders? Compatibility is achieved through matching the ISO form, 0° clearance angle, size and thickness; the 80° geometry and cylindrical hole are designed for secure seating in standard ISO turning holders. What chip control does the insert provide? The double-sided chipbreaker delivers predictable chip formation under typical turning conditions, improving coolant access and helping to avoid long stringy chips in most steel turning operations. How should the chipbreaker and grade be selected? Choose the chipbreaker and grade based on workpiece material, depth of cut and machine/fixture rigidity; the T9225 grade is a robust universal choice for demanding steel turning where a balance of wear resistance and toughness is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, a universal T9225 grade for medium to heavy steel turning, and ISO compatibility for predictable production results — order directly via Metav Werkzeuge or request technical advice from our consultants. CNMG 120416 T9225 Tungaloy indexable turning insert — CVD-coated carbide for medium to heavy steel turning A CNMG120416 T9225 indexable turning insert designed for ISO-standard tool systems, offering a robust cutting grade and a double-sided chipbreaker for interrupted or variable cutting conditions CVD-coated carbide for enhanced wear resistance Universal T9225 grade for medium to heavy steel ISO CNMG120416 form for standard turning holders Double-sided chipbreaker; cylindrical hole Reliable cutting performance under varying conditions The insert delivers consistent cutting behaviour thanks to its CVD-coated carbide substrate and the T9225 grade, which is formulated for robustness in the face of changing engagement conditions. This combination increases resistance to abrasive wear while maintaining toughness where light interruptions or fluctuating feeds occur. The result is a more stable machining process, fewer unexpected tool changes and improved batch-to-batch repeatability — a clear advantage for workshops aiming for steady output and predictable cycle times. Simple integration with ISO tool systems, reducing setup time Built to the ISO CNMG120416 geometry, the component integrates directly with standard holders and boring bars when form, clearance, tolerance class, fastening and thickness are matched. The 80° rhombic form and cylindrical hole ensure secure clamping and repeatable positioning; the specified clearance angle of 0° supports positive rake arrangements. These measurable interface characteristics make tool planning straightforward and reduce machine downtime associated with trial-and-error fitting, helping production planners keep processes lean. Economical edge usage and process security The double-sided design and indexable nature extend usable tool life by offering additional cutting edges after indexing; this converts to lower tooling cost per part and less frequent replacement. The corner radius of 1.6 mm provides a balance between edge strength and surface finish, moderating cutting forces while enabling a controlled chip form. The integrated double-sided chipbreaker stabilises chip control in medium to heavy steel machining and supports safer swarf evacuation, which improves cycle reliability and operator confidence on demanding turning tasks. For availability, compatibility checks or tailored application advice for this Tungaloy CNMG120416 T9225 indexable insert, contact Metav Werkzeuge for prompt technical support and ordering assistance Technical data Article number: 6944565 Manufacturer SKU: TUN6944565 SKU: 6944565-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: CNMG120416 Corner radius: 1.6 mm Thickness: 4.76 mm Size: 12 mm Included angle: 80° Clearance angle: 0° Special features Material: Hartmetall Coating/type: CVD-coated carbide; grade T9225 Chipbreaker: double-sided Hole: cylindrical hole Application: Turning; medium to heavy steel FAQ What materials is this insert suitable for? The Tungaloy CNMG120416 T9225 insert is optimised for medium to heavy steel machining and performs well where toughness is required under variable cutting conditions. How does the CVD coating affect performance? A CVD-coated carbide surface provides improved wear resistance and thermal stability, helping the insert maintain edge shape and cutting life in demanding steel turning applications. Is the insert indexable and how does that save cost? Yes — the double-sided, indexable design allows reuse of cutting edges after rotation, extending service intervals and reducing tooling cost per part for workshop operations. Which holders are compatible with this geometry? Holders and boring bars conforming to ISO CNMG120416 geometry and matching form, fastening and tolerance class are compatible; the insert’s cylindrical hole and 80° rhombic form support secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that combines robust toughness and consistent wear resistance for medium to heavy steel turning; the ISO form ensures straightforward integration with standard holders. Order directly via Metav Werkzeuge or request tailored advice from our consultants for optimal grade and chipbreaker selection. CNMG120416 T9225 CNMG ISO 120416 Turning Insert by Tungaloy — CVD-coated carbide, universal grade A CNMG120416 T9225 indexable turning insert engineered for medium to heavy steel turning, offering a combination of toughness and wear resistance suited to interrupted cuts and variable engagement conditions CVD-coated carbide for enhanced wear resistance Universal T9225 grade for medium to heavy steel Rhombic CNMG shape with 80° cutting angle Double-sided insert with cylindrical hole Consistent cutting performance for medium to heavy turning The CVD-coated carbide composition of this indexable plate delivers a balance between toughness and abrasion resistance that is advantageous when machining steels under varying engagement. The selected grade is optimised to resist chipping during light interruptions while maintaining edge life during sustained cuts. For production environments, this results in fewer unplanned tool changes and a steadier process window, improving overall machine uptimes and effective productivity. ISO form and precise dimensions for reliable holder compatibility Built to ISO standards, the ISO CNMG120416 geometry simplifies tool planning and holder procurement across workshops. Key dimensions include a 12 mm inscribed circle, plate thickness of 4.76 mm and a corner radius of 1.6 mm, with a rhombic form and a nominal cutting angle of 80°. The insert is supplied with a cylindrical hole for secure fastening and a 0° relief angle. These standardised measurements allow predictable clamping behaviour and repeatable positioning in compatible external holders or boring bars. Improved chip control and process stability The double-sided design combined with a dedicated chipbreaker pattern supports controlled chip formation in a range of cutting conditions. Stable chip control reduces surface defects and minimises the risk of chip entanglement, which is especially important in automated or lights-out operations. The universal nature of the grade means operators benefit from a single inventory item that covers several turning tasks, lowering tooling complexity while maintaining component quality. Practical integration and handling for production settings Integration into existing tool systems follows the usual ISO indexable insert workflow: select a compatible external holder or boring bar considering form, relief angle, tolerance class, fastening method and plate thickness. A well-matched system — including the appropriate clamp set and replacement screws — ensures secure fastening and repeatable tool offsets. The insert’s construction supports predictable tool life and stable surface finishes, making it suitable for job shops and production lines seeking efficient, dependable turning solutions. For reliable medium- to heavy-duty turning select the Tungaloy T9225 grade — contact Metav Werkzeuge for availability, application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780834-Tungaloy Manufacturer SKU: TUN6780834 Manufacturer article number: 6780834 Model series: ISO-Drehwendeschneidplatten Application: Turning Material: Hartmetall Grade / coating: T9225, CVD-coated Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Cutting angle: 80° Relief (free) angle: 0° Hole: with hole (cylindrical) Special features Rhombic plate form (CNMG) Double-sided insert Cylindrical hole for secure fastening Designed for medium to heavy steel machining Suitable for interrupted cuts and variable engagement FAQ What materials is this insert suited for? The CNMG120416 T9225 insert is primarily designed for steel machining, offering robust performance in medium to heavy turning operations. How does the T9225 grade affect tool life? The T9225 CVD-coated grade provides a balance of toughness and wear resistance, which helps extend edge life under fluctuating cutting conditions and interrupted cuts. Is the insert compatible with standard CNMG holders? Yes, the CNMG geometry and ISO adherence mean the insert fits standard CNMG holders and boring bars when form, thickness and fastening are properly matched. What are the main dimensions to check when selecting a holder? Key dimensions to confirm are the inscribed circle (12 mm), thickness (4.76 mm), corner radius (1.6 mm) and the 80° cutting angle to ensure correct seating and clamping. Does the insert offer chip control features? The plate is equipped with a double-sided chipbreaker suited to a range of cutting parameters, improving chip formation and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9225 together with ISO CNMG geometry for productive, reliable turning of medium to heavy steels; the robust 1.6 mm nose radius and 80° rhombic form ensure stable cutting and longer tool life. Order directly via Metav Werkzeuge or ask our consultants for application advice. CNMG120416 T9225 ISO turning insert for turning by Tungaloy — CVD-coated carbide, rhombic 80° CNMG120416 T9225 is an ISO-standard rhombic turning insert designed for external and internal turning in demanding steel applications, offering a balance of wear resistance and toughness for changing engagement conditions. CVD-coated carbide grade T9225 80° rhombic geometry CNMG 1.6 mm nose radius for robustness Double-sided chipbreaker for chip control With cylindrical hole for secure clamping Greater productivity through proven cutting-material performance The combination of a CVD-coated cutting surface and the T9225 carbide grade delivers a balance of hardness and toughness that is tuned for the demands of medium to heavy steel turning. This means fewer tool changes and steadier machining cycles under variable engagement or slightly interrupted cuts, translating into measurable productivity gains. The coating improves wear resistance while the substrate maintains edge strength, making the insert suitable where both surface quality and tool life matter. By choosing this insert, operators benefit from consistent chip formation and reduced rework. Stable clamping and geometry for predictable machining results The 80° rhombic geometry and the presence of a cylindrical hole enable secure locating and clamping in ISO-compatible holders, which supports repeatable set-ups and high axial stability. A plate thickness of 4.76 mm and a plate size of 12 mm give the insert rigidity for heavier cuts, while the 1.6 mm nose radius helps to absorb shock during interrupted cutting. The double-sided chipbreaker provides controlled chip evacuation, reducing the likelihood of built-up edge and improving surface finish. These mechanical attributes result in predictable cycle times and fewer scrapped parts. Practical advantages for workshop efficiency and tool management Integration into existing tool systems is straightforward because the insert follows ISO CNMG conventions; matching holders and clamping kits are widely available. The two usable cutting edges per side extend working life and reduce tooling inventory turnover. For production planners, the predictable behaviour of this insert reduces downtime and simplifies machining parameter selection. Technical staff benefit from clearer selection criteria—matching the T9225 chipbreaker and grade to workpiece steel and stability needs—so set-up and process validation become faster and more reliable. Reliable choice backed by manufacturer expertise This insert is based on an established ISO format and is manufactured by a reputable toolmaker, ensuring consistent quality and traceability. The CVD-coated carbide construction supports stable edge retention and broad material coverage for industrial turning tasks. For operations that value reproducible results and lower overall tooling cost per component, the combination of geometry, material and chip control represents a practical and economic solution. For support selecting the correct Tungaloy CNMG120416 T9225 insert for a specific steel grade or machining condition, contact Metav Werkzeuge for application guidance and stock availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6781292 SKU: 6781292-Tungaloy Manufacturer SKU: TUN6781292 Model series: ISO turning inserts Designation: CNMG120416 Manufacturer: Tungaloy Specifications Nose radius: 1.6 mm Plate size: 12 mm Plate thickness: 4.76 mm Included angle: 80° Rake (relief) angle: 0° Features Material: carbide (CVD-coated) Grade: T9225, universal for medium–heavy steel turning Plate form: rhombic Mounting: with cylindrical hole Chipbreaker: double-sided Typical use: external and internal turning; ISO-compatible holders FAQ What materials is this insert best suited for? The CNMG120416 T9225 insert is designed primarily for medium to heavy steel turning and performs reliably under varying cut conditions due to the T9225 grade and CVD coating. How does the 1.6 mm nose radius affect machining? A 1.6 mm nose radius improves robustness during interrupted cuts and enhances surface integrity; the insert’s geometry helps maintain stability when taking heavier passes. Is the insert compatible with standard ISO CNMG holders? Yes, this ISO-standard rhombic insert is compatible with holders designed for CNMG geometry and features a cylindrical hole for secure clamping. How many cutting edges are available per insert? The insert uses a double-sided chipbreaker design, providing multiple usable edges to extend tool life and reduce replacement frequency. What benefits does the T9225 grade offer in production? T9225 combines wear resistance from its coating with core toughness to handle slightly interrupted cuts, yielding longer tool life and consistent chip control on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust T9225 CVD-coated carbide and an 80° rhombic geometry for consistent chip control and extended tool life; this results in reliable productivity for medium to heavy steel turning. Order the CNMG120416 T9225 insert directly via Metav Werkzeuge or consult the technical advisors for application support. CNMG120416 T9225 — ISO turning insert for medium to heavy steel turning, CVD-coated carbide, 80° rhombic The CNMG120416 T9225 is an ISO rhombic indexable insert engineered for external and internal turning where toughness and reliable chip control are required, especially under interrupted cuts. CVD-coated carbide grade T9225 Suitable for medium to heavy steel turning Double-sided chipbreaker for longer life Cylindrical hole for secure clamping High-performance grade for demanding steel turning The insert features a CVD coating applied to a carbide substrate, designated T9225, offering a balance of toughness and wear resistance tailored for medium to heavy steel machining. This combination extends edge life under variable engagement and intermittent cuts, reducing tool change frequency and improving throughput. The 80° approach angle and rhombic plate form produce a favourable cutting geometry that supports stable cutting forces and consistent surface finish, making the component well suited to robust production environments where productivity and repeatability matter. Designed for secure clamping and simple integration Produced to ISO dimensions, the indexable insert is compatible with standard ISO turning holders; compatibility depends on plate form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole and the rhombic shape ensure reliable seating and repeatable location in compatible toolholders, while the double-sided design provides two usable edges per indexation, effectively doubling the number of cuts between replacements. Where program stability and minimised setup time are priorities, the standardised form factor simplifies tool management and inventory control. Stable chip control and process reliability The integrated double-sided chipbreaker is optimised for steel applications and contributes to predictable chip formation and evacuation, lowering the risk of built-up edge and improving surface integrity. In applications with variable engagement or light interruptions, the T9225 grade supplies the necessary toughness to absorb shock without sacrificing wear resistance. For practices seeking measurable gains in cycle-time and tool life, this insert supports a consistent machining strategy that emphasises efficiency and quality. Contact Metav Werkzeuge today to discuss the CNMG120416 T9225 indexable insert for specific applications or to arrange procurement; technical advice is available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6796069 Manufacturer SKU: TUN6796069 SKU: 6796069-Tungaloy ISO designation: CNMG120416 Material: carbide Grade/coating: T9225 (CVD-coated) Plate form: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Facts Corner radius: 1.6 mm Thickness: 4.76 mm Inscribed circle size: 12 mm Approach angle: 80° Relief (free) angle: 0° Special features ISO-standard turning insert Double-sided indexable design Suitable for external and internal turning Engineered for medium to heavy steel machining Compatible with standard ISO holders FAQ What materials is this insert suited for? The CNMG120416 T9225 insert is engineered primarily for medium to heavy steel turning; the T9225 grade balances toughness and wear resistance for such applications. Is the insert double-sided and indexable? Yes, this indexable insert is double-sided, offering two usable cutting edges to extend service life before replacement. Which holders are compatible with the insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; CNMG120416 conforms to ISO dimensions for standard turning holders. What is the corner radius and how does it affect the cut? The corner radius is 1.6 mm; a larger radius improves edge strength and surface finish but may increase cutting forces—appropriate for medium to heavy operations. Does the insert support interrupted cuts? The T9225 grade, offering enhanced toughness, is suitable for interrupted cuts and variable engagement conditions where shock resistance is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the 1.6 mm corner radius for dependable performance under interrupted cuts and unstable conditions; combine robustness, predictable edge life and ISO-compatibility for uninterrupted turning operations. Order the CNMG120416 T9235 indexable insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. CNMG120416 T9235 CNMG — CVD-coated carbide insert for turning by Tungaloy CNMG120416 T9235 is an ISO‑standard indexable insert for turning, designed for external and internal operations where stability is limited and interrupted cuts occur CVD-coated carbide for robust performance Rhombic 80° geometry for versatile turning 1.6 mm corner radius for enhanced edge strength Double-sided chipbreaker for consistent chip control Reliable cutting where conditions vary The CVD‑coated carbide composition delivers a balance between toughness and wear resistance, making it suitable for steel at lower cutting speeds and in less stable setups. The T9235 grade is formulated to preserve the cutting edge during interrupted cuts, which reduces unexpected tool changes and maintains batch consistency. This predictable behaviour supports process reliability and contributes to measurable productivity improvements in small to medium series turning. Compatibility explained: mounts and fitment ISO compatibility depends on form, clearance, tolerance class, clamping and size; the rhombic 80° geometry and a 0° rake angle allow the insert to fit common indexable holders designed for CNMG profiles. The insert's cylindrical hole and standard thickness of 4.76 mm ensure secure fastening and repeatable positioning, simplifying tool setup. Clear reference to ISO geometry aids selection of the matching holder and clamping set, shortening setup times and reducing scrap from incorrect fits. Edge control and chip management for stable results A 1.6 mm corner radius strengthens the cutting edge against mechanical shocks and feed variations, while the double-sided chipbreaker promotes reliable chip formation across a range of feeds. Together these features lower the risk of built-up edge and assist in maintaining surface finish, which is particularly valuable when machining interrupted profiles or when rigidity is constrained. The result is improved first-pass quality and fewer in‑process adjustments. Operability and process benefits in everyday use With ISO standardisation and a clearly defined grade, this insert simplifies inventory and tool planning while offering long running times in demanding conditions. The carbide substrate combined with the CVD layer reduces flank wear under low-speed, heavy engagement scenarios, delivering longer periods between indexings. For operations seeking a robust turning solution that balances edge life with chip control, this insert provides both operational confidence and cost-effective tool life. Discuss application suitability with Metav Werkzeuge — contact Metav Werkzeuge for tailored recommendations and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6786035 SKU: 6786035-Tungaloy Manufacturer article number: TUN6786035 Model series: ISO-Drehwendeschneidplatten Label: CNMG120416 T9235 Tungaloy-Wendeplatte Facts Corner radius: 1.6 mm Thickness: 4.76 mm Plate size: 12 mm Main angle: 80° Rake (free) angle: 0° Special features Material: carbide Coating/type: CVD-coated carbide Grade: T9235 Geometry: rhombic Hole: cylindrical hole Chipbreaker: double-sided Application: turning, external and internal Compatibility: ISO-standard insert, fits holders by form, clearance and size FAQ What materials is the CNMG120416 T9235 suitable for? The CNMG120416 T9235 insert from Tungaloy is suitable for machining steel, with the grade optimised for lower cutting speeds and applications involving interrupted cuts. How does the insert mount to standard toolholders? Compatibility is determined by ISO geometry; the CNMG120416 uses a rhombic 80° form and a cylindrical hole with standard thickness (4.76 mm) to secure into compatible CNMG holders. Is the chip control effective for mixed or interrupted turning? Yes, the double-sided chipbreaker on the CNMG120416 T9235 promotes consistent chip formation and controlled evacuation, improving surface finish in interrupted operations. What is the benefit of the 1.6 mm corner radius? A 1.6 mm corner radius provides enhanced edge strength on the CNMG120416 insert, reducing the risk of chipping under variable feeds and contributing to stable tool life. Can this insert be used for internal and external turning? The CNMG120416 T9235 is designed for both external and internal turning when matched with the appropriate ISO‑compliant holder and under the recommended machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9235 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade with an 80° rhombic geometry and a 1.6 mm corner radius, this insert is optimised for stable performance in steel turning, especially under interrupted or unstable cutting conditions. Take advantage of its double-sided design and ISO compatibility for predictable indexability; order the CNMG120416 directly via Metav Werkzeuge or consult the specialists for holder matching and application advice. CNMG120416 T9235 Tungaloy indexable turning insert — 80° rhombic, double-sided chipbreaker The CNMG120416 T9235 is an ISO-standard indexable turning insert intended for external and internal turning of steel, providing a tough grade for lower cutting speeds and heavily interrupted cuts. CVD-coated carbide grade T9235 Designed for steel with interrupted cuts Rhombic 80° geometry, 1.6 mm corner Double-sided insert with cylindrical hole Consistent cutting life in unstable conditions The combination of a CVD-coated surface and a tough carbide substrate delivers predictable wear behaviour when machining steel under variable conditions. The T9235 grade is formulated to resist chipping and maintain edge stability at lower cutting speeds, making it suitable for applications where intermittent engagement or part vibration occurs. As a result, users can expect fewer unplanned tool changes and a more consistent component quality, which supports efficient production planning and reduced downtime. ISO compatibility and secure clamping for reliable indexing ISO standardisation simplifies the choice of a matching turning holder, but compatibility still depends on geometry and mounting details. The insert’s rhombic 80° form, 0° clearance angle and defined thickness mean that correct selection of an external or internal holder, a corresponding shim or clamp, and replacement screws is essential. When mounted correctly, the double-sided design enables quick index changes and reproducible seating, which reduces set-up time and ensures repeatable tool offsets in serial machining. Practical guidance for application and chip control This insert features a double-sided doppelseitig chipbreaker design (available on both faces) and a cylindrical hole for positive locating; these elements support stable chip formation and evacuation in turning tasks. The geometry and the 1.6 mm corner radius favour medium to heavy cuts where edge robustness is required. Select the chipbreaker and cutting parameters in line with workpiece rigidity and machine capability: the tougher T9235 grade is particularly effective in less rigid setups or when cuts are frequently interrupted, helping to extend the interval between index changes and lower tooling cost per component. For detailed holder compatibility or to confirm the CNMG120416 fit for a specific turning task, contact Metav Werkzeuge for application advice or configuration checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785919 Manufacturer SKU: TUN6785919 SKU: 6785919-Tungaloy Item name: CNMG120416 T9235 Tungaloy indexable insert Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Included angle: 80° Clearance angle: 0° Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Hole style: cylindrical Special features Material: carbide Coating: CVD-coated (T9235) Chipbreaker: double-sided Plate form: rhombic Application: turning (external and internal) System notes: ISO insert; compatibility depends on holder form, relief angle, tolerance class, clamping, size and thickness FAQ Which materials is this insert intended for? The T9235 grade is specified for machining steel; CNMG120416 T9235 is optimised for lower cutting speeds and applications with interrupted engagement in steel components. Is the insert reversible and how many cutting edges are available? This CNMG120416 insert is double-sided, providing two usable edges per face where applicable; the design supports economical indexing and reuse of the cutting edges. What geometry and corner radius does the insert offer? The insert uses a rhombic 80° geometry with a 1.6 mm corner radius, offering a balance of edge strength and versatility for a range of turning operations. How is chip control handled with this insert? A double-sided chipbreaker is integrated to promote stable chip formation in turning; chipbreaker selection should match the workpiece stability and cutting conditions for optimal results. Can the insert be used for internal turning as well as external work? Yes — ISO-standard configuration and the rhombic form make CNMG120416 suitable for both external and internal turning operations, provided the correct holder and clamping are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, stable 80° geometry and a 1.6 mm corner radius for reliable turning in unstable conditions; order directly via Metav Werkzeuge or ask the consultants for application support. CNMG 120416 T9235 turning insert by Tungaloy — CVD-coated carbide, 80° A CNMG120416 T9235 indexable insert designed for ISO-standard external and internal turning, optimised for interrupted cuts and unstable machining conditions ISO-standard rhombic insert CNMG form CVD-coated carbide grade T9235 80° geometry for robust turning Double-sided chipbreaker, with cylindrical hole Greater process stability when conditions are variable The combination of a CVD-coated carbide substrate and the T9235 tough grade delivers consistent performance in interrupted cuts and where fixture stability is limited. The insert’s 80° geometry reduces radial cutting forces, which helps to maintain tool-life under vibration-prone conditions. Where surface finish and tool change intervals influence productivity, this configuration supports predictable machining cycles and lowers overall setup risk. Simple integration into ISO tooling systems for efficient workflow Designed to the ISO profile, the rhombic indexable insert integrates with standard external holders and boring bars; compatibility depends on form, relief angle, tolerance class, fastening and plate thickness. The cylindrical hole and standardised dimensions enable fast seating and secure clamping, cutting setup times and simplifying the selection of replacement plates. Clear system compatibility helps to standardise tooling across production lines. Effective chip control and predictable wear for less downtime A double-sided chipbreaker matched to the insert’s geometry directs chips reliably in common steel turning tasks, improving evacuation and protecting the cutting edge. The 1.6 mm corner radius and 4.76 mm thickness balance strength with cutting precision, while the rhombic profile supports both external and internal turning operations. These attributes reduce unexpected tool failures and contribute to steady, repeatable results. Practical benefits in everyday shop-floor use Choosing this CVD-coated, tough-grade insert reduces the need for frequent replacements under interrupted cutting regimes and lowers the risk of edge chipping in unstable set-ups. The standardised CNMG 120416 size simplifies inventory management, allowing production planners to keep a compact selection of inserts that cover a wide range of turning tasks without sacrificing process reliability. For tailored recommendations or to secure CNMG 120416 T9235 inserts for your production, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930, and request application advice or availability details Technical Data Article number: 6785821 Manufacturer SKU: TUN6785821 Model series: ISO turning indexable inserts SKU: 6785821-Tungaloy Facts Size: 12 mm Corner radius: 1.6 mm Thickness: 4.76 mm Cutting angle: 80° Hole style: cylindrical Special features Material: carbide Coating / grade: T9235 (CVD-coated) Plate shape: rhombic Chipbreaker: double-sided With hole for secure fastening Application: turning FAQ What applications is this insert best suited for? This insert is intended for turning operations, especially external and internal turning where interrupted cuts occur; the T9235 grade performs well in steel machining. Can the insert be used in unstable clamping situations? Yes, the CNMG 120416 T9235 insert is designed as a tougher grade for lower cutting speeds and unstable conditions, reducing the risk of edge chipping. Is the insert reversible or single-use? The insert is double-sided with a chipbreaker on each side, allowing the plate to be indexed to a fresh cutting edge, which extends tool utilisation. What should be considered when matching a holder to this insert? Holder compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO CNMG profile and clamping arrangement. Which materials is the T9235 grade optimised for? T9235 is a tough, CVD-coated carbide grade formulated primarily for steel machining where interrupted cuts and unstable conditions are present. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120416 T9235 Wendeplatten - Tungaloy
Combining a wear‑resistant CVD‑coated carbide grade with an ISO rhombic geometry and a 1.6 mm corner radius, this insert delivers a balance of toughness and chip control for unstable turning and interrupted cuts. Order the CNMG 120416 T9235 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 120416 T9235 Turning Insert, CVD‑coated carbide – Tungaloy The CNMG 120416 T9235 is an ISO‑standard rhombic insert designed for external and internal turning, optimised for unstable conditions and interrupted cuts. ISO rhombic insert CNMG 120416 CVD‑coated carbide grade T9235 1.6 mm corner radius for robust cuts Double‑sided chipbreaker with cylindrical hole High reliability for interrupted and unstable turning The combination of a CVD coating on a carbide substrate and the T9235 grade gives predictable wear behaviour under challenging conditions. The coating reduces adhesion and improves oxidation resistance while the base material provides the toughness needed for variable loads, making the insert particularly suitable for applications where cuts are interrupted or tool stability fluctuates. This results in longer in‑process life and fewer unplanned tool changes, supporting a steady production flow. Clear compatibility and secure clamping for consistent results Being an ISO‑standard rhombic geometry, compatibility with holders is determined by form, clearance angle, tolerance class, fastening and thickness. The insert’s 0° clearance angle, 80° cutting angle and rhombic outline ensure predictable engagement with the workpiece and proper seating in standard toolholders. Correct matching of holder shape and tolerance class secures the insert and helps maintain repeatable positioning, which in turn benefits dimensional consistency and surface finish. Process advantages: chip control, reusability and part quality The insert features a double‑sided chipbreaker and a cylindrical hole, enabling reversible use and straightforward mounting. With a 1.6 mm corner radius and 4.76 mm thickness, the geometry supports stable cutting and improved heat distribution near the cutting edge. Effective chip control lowers the risk of entanglement, shortens cycle times for many turning routines and contributes to a more consistent surface finish, especially in steel applications where chip form and evacuation are critical. Practical guidance for optimal application and economy Select the T9235 grade and the appropriate chipbreaker according to material, cut depth and machine rigidity. The tougher grade performs well at moderate speeds and in conditions with vibration or interrupted cuts, prioritising tool life and process security over maximum cutting speed. Appropriate feed and speed adjustment together with correct holder selection will maximise tool life and minimise downtime, delivering an efficient balance of productivity and consistent machining quality. For application advice, stock checks or to request a matched holder recommendation for the Tungaloy CNMG 120416 T9235 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for fast, practical support Technical data Article number: 6785909 SKU: 6785909-Tungaloy Manufacturer SKU: TUN6785909 Manufacturer: Tungaloy Dimensions & numbers Corner radius: 1.6 mm Size: 12 mm Thickness: 4.76 mm Cutting angle: 80° Clearance angle: 0° Manufacturer article number: 6785909 Special features CVD‑coated carbide grade T9235 Rhombic insert shape (CNMG) Double‑sided chipbreaker Cylindrical hole for secure clamping Suitable for external and internal turning Optimised for interrupted cuts and unstable conditions FAQ What steels is this insert designed for? The CNMG 120416 T9235 insert is a tough CVD‑coated carbide grade optimised for machining a wide range of steels, especially where interrupted cuts or unstable conditions occur. Can the insert be used on both external and internal turning operations? Yes, the ISO‑rhombic geometry and the double‑sided design make the CNMG 120416 T9235 suitable for both external and internal turning applications when paired with the correct holder. How many usable edges are available on the insert? The insert is double‑sided, providing multiple cutting edges; both sides can be indexed to extend service life and reduce tooling costs. Which item reference should be quoted when ordering? Please quote the manufacturer article number 6785909 or SKU 6785909-Tungaloy when ordering the CNMG 120416 T9235 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-compliant geometry, durable PVD-coated carbide and reliable chip control for stable turning processes. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMG 160608 AH120 indexable turning insert, 80° rhombic form — Tungaloy CNMG160608 AH120 is an ISO-format indexable turning insert designed for external and internal turning applications, offering a durable PVD-coated carbide grade for consistent cutting performance. CNMG160608 geometry, 80° rhombic form PVD-coated carbide AH120 for wear resistance Double-sided chipbreaker for stable chip control 0.8 mm corner radius for a sharp, durable edge Precision and long tool life through optimised grade and coating The CNMG160608 AH120 insert pairs an ISO-standard geometry with a PVD-coated carbide substrate to deliver reproducible tool life and cutting-edge retention. The ISO designation guarantees interchangeability with compliant holders, while the AH120 grade is formulated for wear resistance and reduced chipping risk, which supports higher cumulative cutting volumes before indexation is required. This technical combination reduces downtime and increases process throughput in serial and batch turning operations. Consistent chip control and mechanical stability for reliable turning Built with a double-sided chipbreaker and a 0.8 mm corner radius, the insert ensures controlled chip formation and a robust cutting edge for both finishing and profile turning. The 6.35 mm thickness and 80° geometry add stiffness at the cutting zone, helping to minimise vibration and deliver repeatable surface finishes. The presence of a cylindrical hole simplifies secure clamping, contributing to mechanical stability and predictable cutting behaviour under varied cutting parameters. Clear compatibility guidance and selection for production demands Compatibility with toolholders depends on form, clearance angle, tolerance class, mounting method, size and thickness; selecting the correct chipbreaker and grade should match the workpiece material and required process stability. For operations demanding a sharp edge plus high process reliability, the AH120 grade offers a balanced solution that supports both precision and throughput. Technical selection advice and holder matching are available to help specify the insert for particular machines and setups, promoting efficient integration into existing turning cells. For reliable, productive turning with Tungaloy AH120 inserts, contact Metav Werkzeuge for ordering or application support at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6802233 Manufacturer SKU: TUN6802233 SKU: 6802233-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: AH120, PVD-coated Facts Insert designation: CNMG160608 Shape/angle: rhombic, 80° Size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Special features Double-sided chipbreaker Cylindrical hole for secure clamping ISO-compliant indexable turning insert Suitable for external and internal turning Designed for sharp cutting edge and process security FAQ Is this insert suitable for both external and internal turning? Yes. The CNMG160608 AH120 indexable turning insert from Tungaloy is intended for external and internal turning; compatibility with a specific holder must be checked against form, clearance angle and size. What benefits does the AH120 grade provide? The AH120 PVD-coated carbide grade offers improved wear resistance and reduced risk of edge breakage, supporting longer cutting intervals and consistent surface quality. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker delivers controlled chip formation and stable evacuation, which helps maintain process reliability and consistent surface finishes during turning operations. Can the CNMG160608 be used in different holder types? Yes, the ISO designation allows use with compatible holders; secure fit depends on matching the insert form, tolerance class, mounting and thickness to the chosen holder. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6802233 and the SKU is 6802233-Tungaloy for the CNMG160608 AH120 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, stable chip control and ISO compatibility for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for optimal grade and holder matching. CNMG 160608 AH8005 Tungaloy — ISO rhombic turning insert for stable machining The CNMG160608 AH8005 Tungaloy insert is an ISO‑standard rhombic turning insert intended for external and internal turning, designed to excel on heat‑resistant alloys and other hard materials. ISO-standard rhombic insert PVD-coated carbide AH8005 Double-sided chipbreaker design Cylindrical hole for secure clamping Consistent cutting performance for demanding materials The insert’s PVD-coated carbide grade AH8005 provides elevated wear resistance, which reduces flank wear and maintains edge integrity under thermal load. The coating, applied by physical vapour deposition, forms a thin, hard layer that improves substrate protection without compromising sharpness; this results in fewer interruptions for tool changes and a more predictable process. The benefit is a more efficient production flow and reduced scrap rates during turning of heat‑resistant alloys. Productivity gains through predictable tool life A double-sided chipbreaker and a rhombic geometry enable two cutting edges per index, supporting economical tool usage and stable chip formation. The insert is part of an ISO-standard system where compatibility with the toolholder is ensured by matching form, free angle, tolerance class, fastening and thickness; this modular approach simplifies inventory and shortens set‑up times. Predictable tool life translates into lower unit costs and improved spindle utilisation in batch and single‑piece machining alike. Secure mounting and precise engagement with the workpiece The insert features a cylindrical hole and a standard thickness that facilitate firm clamping and repeatable positioning in compatible holders. Key dimensions such as 6.35 mm thickness, 16 mm inscribed circle, and a 0.8 mm corner radius support robust engagement and edge strength for medium to heavy cuts. The insert’s 80° lead angle and 0° free angle contribute to consistent cutting forces, which helps to stabilise the machining process and to protect both the workpiece and the toolholder from undue vibration. Practical guidance for turning applications This grade and geometry are recommended for turning where material hardness and temperature resistance demand a wear‑resistant carbide; suitable operations include both external and internal turning, with the chip‑forming features matched to the machining stability. In practice, selecting the correct chipbreaker and ensuring rigid set‑up are the primary measures to exploit the insert’s advantages; the modular ISO system allows replacement inserts to be swapped with minimal downtime, supporting continuous production targets. Contact Metav Werkzeuge for tailored cutting data and current availability for the Tungaloy CNMG160608 AH8005 insert — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6741643 Manufacturer SKU: TUN6741643 Merchant SKU: 6741643-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade: AH8005 ISO designation: CNMG160608 Shape: Rhombic Size: 16 mm Thickness: 6.35 mm Hole: with hole Hole style: cylindrical hole Rake angle: 0° Chipbreaker: double-sided Corner radius: 0.8 mm Facts Inscribed circle: 16 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Lead angle: 80° Free angle: 0° Special features PVD-coated carbide grade AH8005 Designed for heat-resistant alloys and hard materials Double-sided chipbreaker for stable chip control ISO-standard system compatibility for holders Rhombic geometry with cylindrical hole for secure clamping Typical application: external and internal turning FAQ What materials are suitable for this insert? The CNMG160608 AH8005 Tungaloy insert is intended for heat‑resistant alloys and other hard materials; the PVD‑coated AH8005 grade is optimised for wear resistance under thermal load. Is the insert reversible and how many edges are available? Yes, the rhombic CNMG form with a double‑sided chipbreaker provides multiple usable cutting edges, which allows economical indexing and extended service life. How is compatibility with an existing holder determined? Compatibility is established by matching the insert’s form, free angle, tolerance class, fastening method, size and thickness; the ISO designation CNMG160608 indicates the standard geometry to be matched with ISO‑compliant holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com