CNMG 160608 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced combination of PVD-coated carbide AH8015, a 0.8 mm corner radius and a double-sided chipbreaker for cost-effective, stable turning of heat-resistant alloys — order directly via Metav Werkzeuge or consult the specialists if further advice is required. CNMG 160608 AH8015 — Turning insert (Tungaloy), PVD-coated carbide, double-sided The CNMG160608 AH8015 is a rhombic ISO turning insert designed for general turning of heat-resistant alloys and compatible with ISO holders. PVD-coated carbide AH8015 Rhombic CNMG geometry for versatility Double-sided chipbreaker for economy Cylindrical hole for secure clamping Reliable performance for general turning of heat-resistant alloys The PVD-coated carbide grade AH8015 offers an engineered balance between wear resistance and cutting-edge stability, making it well suited for the general machining of heat-resistant alloys. The coating improves thermal resistance and reduces adhesion at elevated temperatures, which translates into longer tool life and fewer index changes. By selecting a grade that balances toughness and hardness, process consistency is enhanced and downtime for tool changes is reduced, supporting steady production flows. Geometry and dimensions that deliver repeatable results The CNMG rhombic form with a leading 80° approach angle and a 0° clearance offers a predictable cut geometry that supports stable chip formation and dimensional control. The insert thickness of 6.35 mm and the 0.8 mm corner radius contribute to mechanical rigidity and edge strength, suitable for both finishing and moderate roughing passes. The presence of a cylindrical hole enables secure clamping in standard ISO-compatible holders, ensuring repeatable seating and accurate indexing that preserve part tolerances over multiple insert changes. Cost-efficient indexing and reliable clamping for production environments Featuring a double-sided chipbreaker, the insert provides two usable cutting edges per index, improving economy without compromising surface quality. The standardised ISO design simplifies the selection of matching holders, clamp sets and replacement screws, reducing procurement complexity in mixed-tool fleets. For assistance with holder compatibility, selection of the appropriate chipbreaker and optimisation of cutting parameters, Metav Werkzeuge provides technical guidance and component sourcing to support productive machining. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and compatible holders — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultation and quick delivery options Technical data Article number: 6741644 Manufacturer SKU: TUN6741644 Model series: ISO turning inserts Designation: CNMG160608 AH8015 Application: Turning Material: Carbide Coating: PVD Brand: Tungaloy Core dimensions Insert size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Approach/lead angle: 80° Design & features Rhombic plate form (CNMG) Double-sided chipbreaker Cylindrical hole for fastening ISO-compatible geometry PVD-coated hardmetal grade AH8015 FAQ What materials is this insert suitable for? The CNMG160608 AH8015 insert is specified for general machining of heat-resistant alloys; the PVD-coated AH8015 grade balances wear resistance and edge stability for such materials. How does the double-sided chipbreaker affect cost efficiency? A double-sided chipbreaker provides two usable edges per index, improving edge economy and reducing the frequency of insert replacement in continuous production. Is the insert compatible with standard ISO holders? Yes, the ISO-design CNMG geometry and cylindrical hole ensure compatibility with ISO-standard turning holders, though holder choice must match form, clearance, size and thickness. What does the 0.8 mm corner radius mean for finishing? A 0.8 mm corner radius increases edge strength for stable cutting; it supports a good surface finish while offering resistance to chipping in interrupted or moderate-depth cuts. Where to get technical advice or order accessories like clamps and screws? For assistance with compatible holders, clamp sets and replacement screws, Metav Werkzeuge can provide tailored advice and supply the necessary components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 AH905 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH905 grade and the 0.8 mm corner radius for stable edge life and predictable performance in turning operations; order directly via Metav Werkzeuge or consult our technical team for compatibility advice. CNMG 160608 AH905 ISO turning insert, PVD-coated carbide — Tungaloy The CNMG160608 AH905 is an ISO rhombic turning insert engineered for general external and internal turning tasks where a sharp cutting edge and process security are required. PVD-coated carbide AH905 grade 0.8 mm corner radius for edge strength 80° rhombic ISO geometry Double-sided chipbreaker, cylindrical hole Reliable cutting performance for secure production The PVD-coated carbide composition combined with the AH905 grade delivers a balance of wear resistance and edge toughness that supports continuous turning operations. This insert is designed to maintain a sharp cutting edge under variable loads, which reduces the frequency of regrinding and tool changes and contributes to a steadier production flow. The technical design targets stable chip formation and lower scrap rates, so operators and process engineers can expect improved throughput without sacrificing component quality. Precise geometry for controlled chip flow and surface finish The 80° geometry and 0.8 mm radius create a robust edge that works well for both finishing and light roughing passes. The integrated double-sided chipbreaker promotes consistent chip control, preventing long, stringy chips and supporting safer, automated machining. In practical terms, the geometry reduces the need for additional finishing passes by improving the first-pass surface quality, while the modest corner radius balances strength with the ability to achieve acceptable tolerances on turned features. ISO conformity and handling that simplifies tool setup Compliance with ISO turning insert dimensions ensures interchangeability with common holders; the rhombic plate form and cylindrical hole enable secure clamping in standard indexable holders. The plate’s 6.35 mm thickness and 16 mm nominal size provide mechanical stability in the tool pocket, reducing vibration and improving repeatability. These features facilitate straightforward tool changes and minimise machine downtime, supporting leaner production cycles and quicker set-up times across multiple machines. Coating and grade benefits that reduce operational costs The AH905 coating and substrate pairing is engineered to withstand the small fractures and abrasive wear typical of mixed turning tasks, extending usable tool life and increasing process reliability. By delivering reliable chip formation and a predictable wear curve, the insert helps to lower per-part tooling costs and contributes to fewer in-process stoppages. The result is a practical improvement in total machining economy, especially in batch production environments where consistent output is critical. For ordering, technical enquiries or assistance with holder compatibility for this Tungaloy CNMG160608 AH905 insert, please contact Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6859522 Manufacturer SKU: TUN6859522 Material: Carbide Series: ISO turning inserts Designation: CNMG160608 AH905 Facts Insert size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Main angle: 80° Special features PVD-coated carbide AH905 grade Rhombic plate form Double-sided chipbreaker Cylindrical hole ISO-compatible For external and internal turning Manufacturer: Tungaloy FAQ How does the AH905 grade affect tool life? The AH905 grade on the CNMG160608 insert provides a PVD-coated surface and a carbide substrate designed to improve wear resistance and edge security, which typically extends usable tool life under suitable cutting conditions. Is the CNMG160608 compatible with standard ISO holders? Yes, the insert follows ISO dimensions and features a cylindrical hole and rhombic form for secure mounting in common ISO-compatible turning holders. What machining tasks suit this insert best? The insert is suited to general external and internal turning where a sharp edge and process stability are priorities; its geometry supports finishing and light roughing operations. Can the double-sided chipbreaker be used on both sides? The double-sided chipbreaker offers two indexed cutting edges; the CNMG160608 design allows both sides to be used, extending the number of available cutting edges per insert. What is the purpose of the 0° clearance angle? The 0° clearance angle contributes to the insert’s contact geometry with the workpiece, supporting a stable cutting action and consistent dimensional results when matched with an appropriate holder and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 T5105 Wendeplatten - Tungaloy
High wear resistance combined with precise ISO geometry and a reliable fit enables consistent, productive turning operations; the CVD-coated carbide grade T5105 extends tool life under high-speed cutting. Order the CNMG160608 T5105 directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMG 160608 T5105 Turning Insert (CNMG160608) – Tungaloy The CNMG160608 T5105 is an ISO-conforming rhombic turning insert intended for external and internal turning, optimised for stable high-speed machining of cast iron. ISO CNMG 160608 format CVD-coated carbide grade T5105 0° clearance, 0.8 mm corner radius Double-sided rhombic insert with hole Maximise cutting performance under stable conditions This CVD-coated carbide grade delivers excellent wear resistance during high-speed turning of cast iron, where consistent cutting forces and machine stability are present. The protective CVD coating reduces flank wear and promotes longer tool life, which lowers tooling costs per component and supports predictable cycle times. For production environments seeking repeatable surface finish and reduced changeover, the robust coating and substrate combination enables longer intervals between indexings and replacements. Reliable geometry ensures secure seating and precise chip control Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening, size and thickness; the rhombic 80° geometry combined with a 0° clearance angle gives a defined cutting edge orientation for both external and internal operations. The double-sided design and cylindrical hole permit straightforward clamping and indexing, while the 0.8 mm corner radius provides a balance between edge strength and achievable surface finish. Specifying the correct chipbreaker and grade helps to match chip formation to the workpiece and machining strategy. Practical selection guidance for efficient process planning Choosing the appropriate chipbreaker and grade requires consideration of workpiece material, stability of the setup and intended cutting parameters. The CVD-coated T5105 grade is aimed at high-speed processing of cast iron under stable conditions; softer or less rigid setups may benefit from alternative grades or smaller depths of cut. Where finish and dimensional control are priorities, the 16 mm seat size and 6.35 mm thickness support repeatable clamping and minimal runout when combined with ISO-compliant toolholders. Integration into production and maintenance routines The ISO standardisation of the insert family simplifies procurement and stocking: identical form and tolerances allow quick swaps between compatible holders. The insert’s construction supports common maintenance routines—indexing of the double-sided cutting edges extends component life, while predictable wear progression aids spare-part planning. For machining operations focused on throughput and consistency, the combination of geometry, grade and coating offers a pragmatic route to reduced downtime and stable process windows. Contact Metav Werkzeuge for tailored cutting recommendations and to order genuine Tungaloy CNMG160608 T5105 turning inserts; our technical team can advise on holder compatibility and optimal chipbreakers — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850148 Manufacturer SKU: TUN6850148 Product designation: CNMG160608 T5105 Tungaloy insert Facts Insert size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Relief/clearance angle: 0° Insert geometry angle: 80° Special features Material: carbide Coating: CVD-coated Shape: rhombic (CNMG) Double-sided with cylindrical hole Model series: ISO turning indexable inserts Typical application: external and internal turning, cast iron at high speed FAQ What materials is this insert suitable for? The CNMG160608 T5105 insert is a CVD-coated carbide grade designed primarily for high-speed machining of cast iron; it performs best under stable cutting conditions. How is holder compatibility ensured for this insert? Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO CNMG160608 geometry matches ISO-compliant turning holders when these parameters align. Is the insert indexable and how many cutting edges are available? The insert is double-sided with a cylindrical hole for secure clamping; each side provides cutting edges that can be indexed to extend service life for the CNMG160608 T5105 turning insert (SKU 6850148-Tungaloy). What corner radius and clearance angle does this geometry offer? This rhombic CNMG insert has a corner radius of 0.8 mm and a relief/clearance angle of 0°, chosen to balance edge strength and surface finish for turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 T5105 Wendeplatten - Tungaloy
Combining CVD-coated carbide wear resistance with ISO‑standard geometry, this insert delivers stable, high‑speed performance for machining cast iron. Benefit from the robust double‑sided chipbreaker and precise 80° cutting angle to maintain productivity and surface quality. Order the CNMG160608 T5105 insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG160608 T5105 ISO turning insert by Tungaloy — CVD‑coated carbide, 80° geometry The CNMG160608 T5105 is an ISO‑standard rhombic turning insert designed for external and internal turning, optimised for high‑speed machining of cast iron under stable cutting conditions. CNMG160608 ISO rhombic insert, 80° geometry CVD‑coated carbide T5105 for wear resistance Double‑sided chipbreaker for consistent performance Cylindrical hole for secure mounting Maximise productivity with high‑speed, wear‑resistant cutting The combination of CVD‑coated carbide and the T5105 grade provides a wear‑resistant cutting edge suited to high‑speed turning of cast iron. This results in longer tool life and fewer interruptions for insert changes, which directly improves cycle time and process efficiency. The 80° geometry promotes stable cutting forces for robust external and internal turning, while the double‑sided chipbreaker helps control chips and maintain a consistent surface finish. For production environments where uptime and repeatability are priorities, this configuration supports predictable, cost‑effective machining. Reliable fit and secure clamping for repeatable results Compatibility is governed by form, relief angle, tolerance class, fixing method, size and thickness; the insert’s rhombic shape, cylindrical hole and 16 mm size ensure straightforward integration with ISO‑compatible toolholders. The 6.35 mm thickness and corner radius 0.8 mm contribute to edge stability and allow consistent engagement with the workpiece. Selecting a holder that matches the insert’s 0° relief and 80° seating will maintain clamping accuracy and minimise vibration, yielding improved dimensional control and surface quality in serial production. Application guidance for cast iron turning and process security This grade is tailored for stable machining of cast iron, where thermal and mechanical loads are predictable. The CVD layer enhances abrasion resistance, reducing flank wear at elevated cutting speeds. For roughing and finishing passes under steady conditions, the insert provides a balance between productivity and surface integrity. Choose cutting parameters that reflect machine rigidity and workpiece setup; the insert’s chip control features simplify evacuation and reduce the risk of built‑up edge, helping to maintain consistent results across batches. Practical benefits and workshop integration As an ISO‑standard component, the insert makes tool management and inventory control simpler: identical geometry and dimensions allow quick replacement and reuse of holders across setups. The double‑sided design offers two usable cutting edges per index, lowering cost per edge and supporting efficient tool rotation strategies. Where process reliability and reproducible results matter, the combination of T5105 grade and ISO conformity contributes to predictable tool life and fewer unexpected stoppages, aiding production planning and throughput. For specification support or to discuss the suitability of the T5105 grade for a specific operation, contact Metav Werkzeuge—our consultants can advise on holder compatibility and cutting data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6852916 Manufacturer SKU: TUN6852916 SKU: 6852916-Tungaloy Model series: ISO turning inserts Type designation: CNMG160608 Application: Turning Core data Geometry angle: 80° Insert size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Design and features Shape: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Grade/coating: T5105, CVD-coated carbide Material: carbide FAQ Which materials is this insert designed for? The CNMG160608 T5105 insert (Tungaloy) is designed primarily for high‑speed machining of cast iron and performs best under stable cutting conditions. How is the insert clamped and how to ensure compatibility? Compatibility depends on form, relief angle, tolerance class, fixing, size and thickness; the insert fits ISO‑standard holders with 80° seating and a cylindrical hole for secure clamping. What advantages does the T5105 grade offer? The T5105 grade combines CVD protection with a wear‑resistant carbide substrate, providing improved abrasion resistance and extended edge life in cast‑iron turning. Is the insert indexable and how many edges are available? The insert is double‑sided with a double‑sided chipbreaker, offering multiple indexable edges to lower cost per edge and support efficient tool rotation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160608 T5115 Wendeplatten - Tungaloy
A CVD‑coated carbide insert in grade T5115 combines wear resistance with cutting‑edge stability for reliable cast‑iron turning; the ISO CNMG 160608 geometry with an 80° rhombic profile, 0.8 mm corner radius and 0° clearance delivers consistent contact and repeatable results. Order the insert through Metav Werkzeuge or request assistance for holder matching and fixture selection. CNMG 160608 T5115 — ISO turning insert for turning applications, Tungaloy The CNMG160608 T5115 is an ISO‑standard rhombic insert made for external and internal turning, optimised for cast‑iron machining with a balance of wear resistance and edge stability ISO‑compliant CNMG 160608 geometry CVD‑coated carbide grade T5115 Balanced wear resistance and edge stability Double‑sided chipbreaker with cylindrical hole Precision geometry that eases setup and increases uptime The rhombic 80° geometry and 0° clearance ensure a predictable tool path and stable contact with the workpiece. The insert’s 0.8 mm corner radius and 6.35 mm thickness contribute to robust edge strength and resistance to chipping, which in turn reduces unplanned tool changes and improves process reliability. As an ISO‑conforming insert, it fits into standard CNMG‑type toolholders provided the holder matches the insert form, tolerance and clamping arrangement; this compatibility simplifies inventory and shortens changeover times. The result is a measurable reduction in machine idle time through consistent repeatability. Coating and grade designed for cast‑iron productivity The CVD‑coated carbide composition in grade T5115 is formulated as a universal choice for cast iron, providing a compromise between abrasion resistance and cutting‑edge stability. The coating enhances thermal and chemical resistance, extending tool life in heavy interrupted cuts and continuous production runs. Stable chip formation is supported by the double‑sided chipbreaker, which maintains efficient evacuation and reduces heat buildup at the cutting edge. For workshops seeking steady surface quality and predictable wear behaviour, this insert offers a cost‑effective route to lower per‑part tooling costs. Practical system considerations for reliable machining In a typical setup the ISO insert is paired with a matching external holder or boring bar plus a shim or clamp kit and spare screws to form the complete system. Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness, so holders should be selected to match these parameters exactly. The insert’s cylindrical hole enables secure clamping and straightforward indexing when the edge is refreshed. For both roughing and finishing passes in cast iron, the combination of geometry and grade reduces vibration sensitivity and supports predictable cycle times. Productivity benefits and recommended applications The insert excels in external and internal turning operations where cast iron is the primary workpiece material; its universal grade allows use across a broad range of grey and ductile cast‑iron grades. The balance of wear resistance and edge strength helps maintain dimensional stability over longer tool lives, supporting higher process yields and fewer interruptions. Where higher cutting forces or interrupted cuts are expected, the robust 6.35 mm body and rhombic form provide the mechanical support required for stable cutting. For series production, the repeatable performance of this ISO insert contributes directly to throughput and part quality. For application advice, stock availability and assistance selecting the correct holder for the Tungaloy CNMG160608 T5115 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical guidance and supply options. Technical data Manufacturer article number: 6850149 SKU: 6850149-Tungaloy Manufacturer SKU: TUN6850149 Model series: ISO‑turning inserts Designation: CNMG160608 T5115 Brand: Tungaloy Material: carbide Facts Corner radius: 0.8 mm Plate thickness: 6.35 mm Insert size: 16 mm Geometry angle: 80° Clearance angle: 0° Hole style: cylindrical Special features CVD‑coated carbide grade T5115 Double‑sided chipbreaker Rhombic insert form (CNMG) Intended use: external and internal turning Optimised for cast iron machining ISO‑compliant for standard CNMG holders FAQ What applications suit this insert best? The CNMG160608 T5115 insert is intended primarily for external and internal turning of cast iron, where its CVD‑coated carbide grade T5115 offers a balanced combination of wear resistance and edge stability. How is the insert clamped and indexed? The insert is provided with a cylindrical hole for secure clamping and is double‑sided to allow indexing of the cutting edges; compatibility with holders depends on matching the ISO CNMG geometry and thickness. Can the insert be used for finishing passes? Yes — the geometry and 0.8 mm corner radius support finishing where a robust edge and good surface quality are required; choose cutting parameters and holder rigidity to match the desired surface finish. Which materials are recommended for use with this grade? The T5115 grade and CVD coating make the insert suitable for a broad range of cast‑iron materials, delivering stable chip formation and consistent wear behaviour in production turning. Is the insert supplied as a single piece or in kits? The item is offered as a single ISO insert (CNMG160608 T5115); tool systems typically require the matching external holder or boring bar plus a shim/clamp set and screws, which can be supplied separately. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160608 T5115 Wendeplatten - Tungaloy
Combining CVD-coated carbide longevity with an 80° rhombic geometry and 0.8 mm corner radius, this insert offers stable edge life and efficient cast-iron machining; order the CNMG160608 T5115 via Metav Werkzeuge or consult our specialists for application matching. CNMG160608 T5115 CNMG turning insert — Tungaloy (CVD-coated carbide, 0.8 mm radius, 80°) The CNMG160608 T5115 is an ISO-standard rhombic indexable turning insert designed for external and internal turning, optimised for cast-iron applications and compatible with ISO toolholders. CVD-coated carbide for consistent wear resistance Universal grade T5115 for cast iron machining Rhombic 80° geometry with 0.8 mm corner radius Double-sided chipbreaker, with cylindrical hole Greater productivity through reliable edge life The CVD-coated carbide substrate and the T5115 grade combine to deliver a balanced mix of wear resistance and edge stability, which translates into longer tool life and fewer indexings. For production environments where consistent part quality and predictable tool change intervals matter, this design reduces unplanned downtime and contributes to a more efficient machining cycle. The CVD coating helps resist abrasion and thermal stress during continuous turning operations, so the cutting edge maintains form over extended runs. Improved chip control lowers rework and cycle time The insert’s double-sided chipbreaker and rhombic 80° geometry are configured to influence chip formation positively during both roughing and finishing passes. Controlled chips minimise surface defects and ease chip evacuation from the cutting zone, reducing the need for manual intervention and cleaning. As a result, process stability improves and cycle times become more predictable—advantages that are particularly relevant in small-batch production as well as automated machining centres. Compatibility and handling for straightforward integration Constructed to ISO dimensions with a 6.35 mm thickness, a cylindrical hole and standard clamping interfaces, the insert integrates with common ISO toolholders when form, relief angle, tolerance class, fastening method, size and thickness match. The specified 0° relief angle and the rhombic plate form ensure compatibility with a wide range of external holders and boring bars. Where holder fitment or application-specific questions arise, matching is determined by those measurable parameters rather than by brand alone, simplifying retrofits and tool inventory management. Optimised for cast-iron applications — fewer compromises The T5115 grade is formulated as a universal solution for cast iron, offering a compromise between wear resistance and edge robustness that supports both stable roughing and accurate finishing. For shops that primarily machine grey or nodular cast iron, the grade reduces the need for multiple special-purpose inserts, aiding stock rationalisation and operational simplicity. Choosing the correct insert geometry and chip control for the specific cast-iron type further enhances surface quality and repeatability. Contact Metav Werkzeuge for personalised application advice on Tungaloy CNMG160608 T5115 inserts and secure original stock for reliable cast-iron machining Technical Data Article number: 6852917 Manufacturer SKU: TUN6852917 SKU: 6852917-Tungaloy Core specifications ISO designation: CNMG160608 Grade: T5115 Angle: 80° Corner radius: 0.8 mm Thickness: 6.35 mm Insert size: 16 Materials & features Carbide substrate, CVD-coated Rhombic plate form Double-sided chipbreaker Cylindrical hole (with hole) ISO-standard turning insert Application: turning, external and internal Universal for cast iron machining FAQ Is the CNMG160608 T5115 suitable for cast iron? The CNMG160608 T5115 insert is designed as a universal grade for cast iron and provides a balanced combination of wear resistance and cutting-edge stability for grey and nodular cast-iron machining. Can this insert be used in common ISO toolholders? Compatibility is ensured when holder form, relief angle, tolerance class, fastening method, size and thickness correspond; the CNMG160608 T5115 follows ISO dimensions for straightforward integration. Is the chip control effective for both roughing and finishing? The double-sided chipbreaker on the CNMG160608 T5115 is engineered to provide controlled chips in both roughing and finishing passes, improving surface quality and reducing rework. What are the key measurable specifications of the insert? The CNMG160608 T5115 has an 80° rhombic geometry, a 0.8 mm corner radius and a plate thickness of 6.35 mm as core dimensional characteristics. Does the insert require a specific clamping screw or seat? The CNMG160608 T5115 uses standard ISO clamping interfaces; precise fastening and seat requirements depend on the holder design, tolerance class and the intended machining stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide (T5125), a 0.8 mm nose radius and ISO-standard CNMG geometry for reliable interrupted cutting; order the inserts directly via Metav Werkzeuge or consult our technical advisers for application support. CNMG 160608 T5125 indexable insert for turning — Tungaloy, CVD-coated carbide, 0.8 mm radius CNMG 160608 T5125 is an ISO-standard indexable insert designed for general turning and particularly suited to interrupted cuts and less rigid set-ups CVD-coated carbide grade T5125 Optimised for interrupted cuts on cast iron Double-sided chipbreaker, rhombic CNMG form 0° clearance and cylindrical hole for stable clamping High, predictable productivity for interrupted turning The combination of CVD-coated carbide in grade T5125 with ISO CNMG geometry delivers a balance between toughness and wear resistance that benefits cycle times and tool life. The tougher substrate of this grade is engineered for interrupted cuts and operations where stability is limited; in practice, this reduces insert chipping and downtimes. The rhombic form and double-sided chipbreaker provide reliable chip formation and allow economical use of both sides before indexation. Reliable clamping and holder compatibility reduce setup risk Compatibility with toolholders depends on form, free angle, tolerance class, fixation and thickness; the insert’s 0° clearance, cylindrical hole and 6.35 mm thickness ensure positive seating and repeatable clamping. This leads to stable clamping, reduced vibration and more consistent surface finish when paired with an appropriate CNMG-capable holder. Specifying the correct holder and torque for the clamping screw is essential to exploit the insert’s design and to protect the cutting edge. Material technology that improves edge resilience and run-time The T5125 cutting grade uses CVD layering to enhance edge life where interrupted machining and tough workpiece materials are present. This results in improved resistance to mechanical shock and better preservation of the cutting edge under variable conditions. For components in cast iron and similar materials, the insert’s substrate and coating combination provide a measured increase in tool life and permit slightly higher feed rates without premature wear. Practical selection and handling guidance for consistent results Choose the insert when facing external turning or internal turning tasks with intermittent engagement; the nose radius 0.8 mm supports a balance of edge strength and surface quality. Install the insert with the specified torque and check the seat for cleanliness before clamping. When switching materials or moving from stable to less rigid set-ups, re-evaluate cutting data and consider a reduction in cutting speed to preserve edge integrity until the process is proven. For reliable interrupted cutting on cast iron and less rigid setups, request Tungaloy CNMG 160608 T5125 inserts from Metav Werkzeuge and obtain tailored application advice via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: 6850150 Manufacturer SKU: TUN6850150 Retail SKU: 6850150-Tungaloy ISO designation: CNMG160608 Grade: T5125 Key measurements Size: 16 mm Thickness: 6.35 mm Nose radius: 0.8 mm Included angle: 80° Clearance angle: 0° Design and features Shape: rhombic (CNMG) Hole: with cylindrical hole Chipbreaker: double-sided Material: carbide (CVD-coated) Typical application: turning, interrupted cuts, cast iron FAQ What materials is this insert best suited for? The CNMG 160608 T5125 insert is formulated for cast iron and similar materials; the T5125 grade offers improved toughness for interrupted cutting and less stable machining conditions. How does the insert indexation work with a double-sided chipbreaker? The double-sided chipbreaker allows the insert to be indexed and rotated to a fresh cutting edge; this extends service life and maintains consistent chip control when the insert is used on compatible CNMG holders. Can this insert be used for finishing operations? While the CNMG 160608 T5125 can achieve acceptable finishes, its primary optimisation is for interrupted cuts and robustness; for dedicated finishing, a finer nose radius or a grade optimised for surface finish may be preferable. What should be checked before mounting the insert? Before mounting, ensure the seat and clamping surfaces are clean, use the correct clamping screw for the cylindrical hole, and apply the recommended torque to achieve stable clamping without deforming the insert. How does the 0° clearance affect cutting performance? A 0° clearance reduces radial relief and supports stiffness at the cutting zone; this benefits interrupted cutting by offering a stable cutting geometry but may require correct setup to avoid rubbing in certain light-cut finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 T5125 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T5125, the 0.8 mm corner radius and the sturdy rhombic CNMG160608 geometry for reliable turning performance; order directly via Metav Werkzeuge or contact the consultants for application advice. CNMG 160608 T5125 — ISO turning insert CNMG for Turning by Tungaloy CNMG160608 T5125 Tungaloy insert for ISO-compliant external and internal turning, engineered for interrupted cuts and less rigid setups CNMG160608 ISO rhombic insert, 80° geometry CVD-coated carbide grade T5125 Double-sided insert with 0.8 mm corner radius Suited for turning cast iron under interrupted cuts Consistent chip control for interrupted turning operations The insert combines a CVD-coated surface with a tougher carbide substrate, designed to maintain cutting edge integrity in interrupted cutting conditions. The T5125 grade is specified for applications involving cast iron where shocks and vibration can occur; this results in fewer edge failures and extended usable life compared with uncoated grades. The double-sided chipbreaker offers repeatable chip formation on both cutting edges, reducing downtime for index changes and supporting a steady production flow. Geometry and mounting that simplify tool selection and clamping The rhombic CNMG form with an 80° included angle and a 0° relief provides stable contact conditions in a wide range of turning setups. The insert’s 0.8 mm corner radius balances edge strength and surface finish, enabling moderate feed rates without sacrificing edge life. The unit is supplied with a cylindrical hole for secure clamping; compatibility with holders depends on form, clearance angle, tolerance class, fastener type, size and thickness. Together, these attributes help to reduce setup iterations and improve process repeatability. Material suitability and practical benefits for the workshop Manufactured from solid carbide with a CVD coating, this insert is optimised for machining cast iron in less rigid conditions, where a tougher grade prevents premature chipping. The plate’s 6.35 mm thickness and standard ISO sizing support stable cutting when paired with a correct external holder or boring bar. For engineering teams seeking predictable tool life and consistent part quality, the combination of geometry, grade and chipbreaker design delivers measurable improvements in machining reliability and throughput. Contact Metav Werkzeuge today to discuss holder compatibility and order the CNMG160608 T5125 insert or request tailored application advice Technical data Article number: 6852898 SKU: 6852898-Tungaloy Manufacturer SKU: TUN6852898 Model series: ISO turning inserts Product name: CNMG160608 T5125 Tungaloy insert Manufacturer: Tungaloy Facts Insert size: 16 Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: CVD-coated Grade: T5125 Shape: rhombic Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert designed for? The CNMG160608 T5125 insert is specified for machining cast iron and is suitable for interrupted cuts where a tougher grade is required. Can the insert be used for both internal and external turning? Yes, the ISO CNMG form and the 80° geometry make the insert suitable for both external and internal turning operations when matched with the correct holder. How does the T5125 grade affect tool life? The T5125 grade provides a tougher substrate with a CVD coating to resist chipping under unstable conditions, which improves reliability and can extend edge life in interrupted cutting. Is the CNMG160608 compatible with standard ISO toolholders? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert is ISO-compliant and fits holders designed for CNMG160608 geometry. What is the advantage of the double-sided chipbreaker? A double-sided chipbreaker provides two usable cutting edges, enabling cost-efficient indexing and consistent chip formation across both edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control and ISO compatibility for reliable, productive turning. Order the CNMG160608 T9205 insert directly via Metav Werkzeuge or ask the consultants if additional information is required. CNMG 160608 T9205 CNMG turning insert for Turning — Tungaloy The CNMG160608 T9205 is an ISO‑standard rhombic indexable insert engineered for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide grade T9205 for high wear resistance Double-sided insert with integrated chipbreaker ISO-standard CNMG 160608 profile for secure fitting 0.8 mm corner radius and 6.35 mm thickness for stability Maximise productivity in steel turning with a wear-resistant grade The CVD-coated T9205 grade combines surface protection and substrate toughness to deliver consistently long tool life when machining steel. Designed for higher cutting speeds and stable set-ups, the insert reduces unscheduled tool changes and supports a steady production flow. The carbide substrate with its protective CVD-coated layer provides reliable performance and predictable wear behaviour, translating into less downtime and improved machining economy. Secure seating and geometry that support repeatable accuracy Thanks to its ISO-standard CNMG profile and rhombic form, the insert offers accurate seating and repeatable positioning in compatible toolholders. The combination of a 0.8 mm corner radius and 6.35 mm thickness provides rigidity, while the double-sided design ensures efficient use of material and quick index changes. This geometry is particularly useful for applications requiring tight tolerances in external and internal turning, where clamping stability and form fit are decisive for surface finish and dimensional control. Integrated chip control and handling for smoother cycles The built-in chipbreaker geometry is optimised for chip formation during conventional turning of steel, promoting manageable chips and helping to protect both the workpiece and the cutting edge. Under stable cutting conditions the insert contributes to improved surface integrity and reduced secondary operations. Where process consistency matters, this grade supports dependable outcomes and a more streamlined workflow. For high-performance turning with a proven carbide grade, contact Metav Werkzeuge to discuss application parameters or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 to consult on the best holder and cutting data for this Tungaloy insert Technical data Article number: 6785732 Manufacturer SKU: TUN6785732 SKU: 6785732-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG160608 T9205 Core specifications Size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included hole: cylindrical hole Included angle: 80° Material and features Material: carbide (CVD-coated) Grade: T9205 Chipbreaker: double-sided Shape: rhombic Application: turning (external and internal) Compatibility: ISO toolholders FAQ What materials is this insert best suited for? The CNMG160608 T9205 grade is formulated for productive turning of steel; the CVD-coated carbide performs well under stable cutting conditions with higher cutting speeds. Is the insert reversible or single-use? This is a double-sided indexable insert; both edges are usable, allowing reindexing to extend service life before replacement. Which corner radius and thickness does the insert have? The insert features a 0.8 mm corner radius and a thickness of 6.35 mm, offering rigidity for stable turning operations. Does the CNMG160608 fit standard ISO holders? The insert follows ISO CNMG geometry and is compatible with holders designed for CNMG 160608 inserts, provided the holder matches form, clearance and clamping specifications. How does the chipbreaker affect machining? The integrated chipbreaker promotes controlled chip formation during turning, improving chip evacuation and contributing to a consistent surface finish with fewer interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide and T9215 toughness for consistent productivity in medium steel turning; the CNMG rhombic form with a 0.8 mm corner radius and 80° geometry ensures reliable edge strength and simple indexability — order via Metav Werkzeuge or consult our experts for application guidance. CNMG 160608 T9215 CNMG160608 turning insert for medium steel, Tungaloy The CNMG160608 T9215 is an ISO‑standard rhombic turning insert designed for medium steel machining, combining a CVD‑coated carbide grade with a double‑sided chipbreaker for stable chip control in continuous to slightly interrupted cuts. CVD‑coated carbide for extended wear life Optimised for medium steel turning Rhombic CNMG 16 mm form with 80° angle Consistent cutting performance for medium steel The CVD‑coated T9215 carbide grade delivers a balance of high wear resistance and reliable toughness, making it a practical choice where sustained productivity is required. The coating reduces flank and crater wear under elevated temperatures, so the insert maintains a predictable life in long turning cycles. For shop floors seeking process stability, this combination reduces unplanned tool changes and supports an even surface finish, particularly when machining medium‑strength steels with continuous to slightly interrupted cuts. Secure mounting and precise fit for predictable results ISO compatibility depends on geometry and tolerances; the rhombic CNMG form and the included cylindrical hole ensure straightforward clamping in compatible holders. The 6.35 mm plate thickness and the 80° lead angle contribute to a stable seating and load distribution, while the 0° clearance angle supports geometries used in standard external and internal turning operations. The insert’s physical dimensions and hole style are designed for repeatable assembly, so toolholding systems that match form, size and fastening method will deliver reproducible running accuracy. Productivity through geometry and chip control A double‑sided chipbreaker extends the number of usable edges and improves chip formation across a range of cutting conditions, which lowers tooling costs per component and shortens downtime for index changes. The 0.8 mm corner radius provides a compromise between edge strength and surface integrity: sufficient robustness for moderate interruption, yet small enough to maintain required tolerances on turned profiles. Overall, the insert supports efficient material removal rates while helping to preserve component quality and minimise rework. Practical application and selection guidance The insert is intended for turning tasks where medium steel is predominant; selection of the chipbreaker and grade should be matched to workpiece material, cutting mode and machine stability. Compatibility is assessed by holder form, free angle, tolerance class, fastening method, size and thickness; these factors determine secure seating and optimum cutting geometry. The system comprises the ISO‑format insert, a corresponding external holder or boring bar, plus clamping accessories and replacement screws as required for assembly. For application advice or to secure Tungaloy inserts in T9215 grade for your turning operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and ordering support. Technical Data Article number: 6772193 SKU: 6772193-Tungaloy Manufacturer SKU: TUN6772193 Brand: Tungaloy Designation: CNMG160608 Data Corner radius: 0.8 mm Insert size: 16 mm Thickness: 6.35 mm Lead/attack angle: 80° Clearance angle: 0° Hole: cylindrical Special features CVD‑coated carbide, grade T9215 Rhombic CNMG geometry Double‑sided chipbreaker ISO‑standard turning insert Suitable for medium steel machining Compatible with matched holders for secure clamping Designed for continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The CNMG160608 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for productive results in typical steel turning applications. How is the insert mounted in a holder? Mounting uses the insert’s cylindrical hole and a compatible clamping system; correct fit depends on holder form, free angle, tolerance class, fastening and insert thickness to ensure secure seating. What benefits does the T9215 coating provide? The CVD coating on the T9215 carbide reduces wear at elevated temperatures and improves flank resistance, which helps to extend life and maintain surface finish in longer production runs. Is the insert indexed on both sides? The insert features a double‑sided chipbreaker, allowing multiple indexing options to extend effective tool life while maintaining consistent chip control. Which geometry details affect cutting behaviour? The rhombic CNMG form, 80° lead angle and 0.8 mm corner radius influence edge strength, cutting forces and surface finish; these parameters were chosen to balance robustness and dimensional control in turning tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160608 T9215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide and a 0.8 mm corner radius for robust edge life and steady chip control; the CNMG geometry ensures broad ISO compatibility and straightforward indexability. Order the CNMG160608 T9215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 160608 T9215 Turning insert — CVD-coated carbide, 0.8 mm corner radius (Tungaloy) A CNMG160608 T9215 indexable turning insert designed for productive medium-steel turning and compatibility with ISO toolholders. CNMG form for broad ISO compatibility CVD-coated carbide grade T9215 0.8 mm corner radius for robust edges Double-sided chipbreaker for consistent chip control High-productivity turning for medium steels The grade combines CVD-coated carbide with an optimised substrate so the insert maintains wear resistance even under sustained cutting. This brings a clear production advantage: reduced regrinds and fewer tool changes, which supports higher productivity in continuous to lightly interrupted turning operations. The coating provides thermal and abrasive protection, while the substrate balances toughness and hardness so the cutting edge resists both flank wear and chipping. Stable geometry for reliable surface quality The rhombic CNMG form with a 0° clearance and a 0.8 mm corner radius delivers predictable tool behaviour and a surface finish that is stable across serial production. Neutral clearance geometry helps in general turning applications and contributes to repeatable chip formation, while the moderate corner radius increases edge strength without compromising accuracy. The combination of shape, tolerance and fastening dimensions makes this insert compatible with a wide range of ISO holders. Practical compatibility and easy handling in the workshop As an indexable insert with a double-sided chipbreaker, the component offers economical use of cutting edges and fast indexing during servicing. The 6.35 mm thickness and cylindrical hole ensure secure clamping and reliable location in appropriate clamping sets. The ISO designation simplifies stocking and holder selection: an insert, suitable holder, a shim/clamp set and replacement screws form a complete system for efficient turning processes. For further technical details or application matching, the Metav Werkzeuge team provides support and specification advice. Contact Metav Werkzeuge to request the CNMG160608 T9215 insert or for application advice; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6780197 SKU: 6780197-Tungaloy Manufacturer SKU: TUN6780197 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Specifications Size: 16 Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle/wedge: 80° Design & features Coating: CVD Material: carbide ISO designation: CNMG160608 Shape: rhombic Hole: with hole — cylindrical hole Chipbreaker: double-sided Application: Turning Compatibility: determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CNMG160608 T9215 insert is formulated for medium steel machining; the CVD-coated carbide grade T9215 combines wear resistance and toughness suitable for productive steel turning. Can the insert be used on interrupted cuts? Yes, the T9215 grade and the rhombic geometry tolerate light interruptions; however, machining strategy and holder rigidity should match the cutting conditions to avoid shock loads on the insert. How is the insert clamped in the holder? The insert features a cylindrical hole for secure fastening; it is located and clamped in the matching ISO-compatible holder with the appropriate shim or clamp set. Is the chip control suitable for serial production? The double-sided chipbreaker offers consistent chip formation and repeatable behaviour, supporting stable surface quality in serial turning operations. What identifiers help when reordering this insert? Use the ISO designation CNMG160608, grade T9215 and the manufacturer SKU TUN6780197 to ensure correct reordering of the Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160608 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, reliable chip control and ISO compatibility for consistent turning results; order the insert directly via Metav Werkzeuge or consult the team for application advice. CNMG 160608 T9225 – ISO indexable insert for turning by Tungaloy CNMG 160608 T9225 – Tungaloy indexable insert is an ISO-standard turning insert designed for medium to heavy steel machining, offering a CVD-coated cemented carbide grade optimised for interrupted cuts and variable engagement. ISO‑compatible rhombic insert CVD‑coated cemented carbide grade T9225 Double‑sided chipbreaker for stable cutting 6.35 mm plate thickness for secure clamping High cutting reliability for demanding steel work The CVD‑coated carbide composition and the T9225 grade deliver a balance of toughness and edge stability suited to medium and heavy steel turning. The coating supports higher thermal resistance and improved wear behaviour, which helps to maintain cutting edge integrity under variable engagement or slightly interrupted cuts. This results in fewer indexings, longer productive life per edge and more predictable change intervals in batch production. Secure mounting and standard compatibility reduce setup time Built as an ISO indexable insert, compatibility with toolholders depends on geometry, 0° clearance angle, tolerance class, clamping method, size and thickness. The rhombic plate form, cylindrical hole and 6.35 mm thickness ensure a firm mechanical fit in properly matched holders and boring bars. Clear reference to the ISO designation eases selection of a matching outside holder or boring bar, helping to avoid mismatches that compromise rigidity or repeatability. Consistent chip control and surface quality The double‑sided chipbreaker geometry has been engineered to manage chips effectively during external and internal turning operations, reducing built‑up edge and ensuring steady evacuation. The 0.8 mm nose radius contributes to a robust cutting edge and helps achieve a reliable surface finish without sacrificing strength at the tip — a pragmatic trade‑off for shopfloor production where stability and repeatable finish yield operational gains. Practical selection guidance for shopfloor use Choose the chipbreaker and the T9225 grade according to the workpiece material, machining strategy and machine stability; the insert performs well where moderate to heavy material removal is required and where occasional interruptions occur. The ISO series is supplied as an insert, to be combined with a suitable outside holder, shim or clamping kit and replacement screws to complete the system. For validation of holder compatibility and process parameters, the supplier’s technical data and trial cuts remain the recommended route. For reliable medium‑to‑heavy steel turning with proven chip control, specify the Tungaloy T9225 CNMG 160608 insert and contact Metav Werkzeuge for tailored advice and order placement. Technical data Article number: 6780995 Manufacturer SKU: TUN6780995 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade: T9225 Facts Insert designation: CNMG160608 ISO code: 160608 Size: 16 mm Plate thickness: 6.35 mm Nose radius: 0.8 mm Clearance angle: 0° Included hole: with cylindrical hole Insert shape: rhombic Angle: 80° Special features Schneidstofftyp: CVD‑coated cemented carbide Chipbreaker: double‑sided Typical application: external and internal turning System components: ISO insert, matching outside holder or boring bar, shim/clamping set, replacement screws Suitability: robust universal grade for variable engagement and slightly interrupted cuts FAQ What materials is this insert intended for? The CNMG 160608 T9225 is designed primarily for medium to heavy steel machining, where toughness and edge stability under variable engagement are required. How does the T9225 grade affect tool life? The T9225 CVD coating enhances thermal resistance and wear behaviour, which typically increases edge life and reduces the frequency of indexings under comparable cutting conditions. Is the insert compatible with standard ISO holders? Yes; the ISO designation and the rhombic geometry mean the insert is compatible with holders that accept CNMG‑style inserts, provided the holder matches form, tolerance class, clamping method, size and thickness. What advantage does the double‑sided chipbreaker provide? The double‑sided chipbreaker offers reliable chip formation in both index orientations, improving evacuation and contributing to more consistent surface quality during turning. Can this insert be used for interrupted cuts? The CNMG‑shaped insert in T9225 is intended for applications where slightly interrupted cuts occur and where a tougher grade is beneficial for edge integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160608 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of high process reliability, robust CVD-coated carbide and optimised chip control for consistent turning results. Order the CNMG160608 T9235 indexable insert directly via Metav Werkzeuge or ask our consultants for tailored recommendations. CNMG 160608 T9235 Turning insert (ISO CNMG, CVD-coated carbide) by Tungaloy The CNMG160608 T9235 is a rhombic ISO-indexed turning insert designed for general turning of steel, offering a neutral 0° clearance and double-sided chipbreaker for improved chip control in interrupted and unstable cuts. CVD-coated carbide grade T9235 Double-sided chipbreaker design 0° clearance angle for neutral geometry Precise chip control for interrupted and unstable turning The insert's double-sided chipbreaker is engineered to secure reliable chip formation even under interrupted cuts and unstable conditions. By guiding the chip away from the cutting zone, the insert reduces the risk of re-cutting and tool damage, which translates into more predictable cycle times and fewer secondary operations. Advantages such as easier chip evacuation and lower tendency to form long, entangling chips are particularly relevant for shops facing variable workpiece stability or frequent step changes. Robust CVD-coated carbide for steel machining A CVD-coated carbide substrate is specified for the T9235 grade, providing a tough cutting edge that performs well at lower cutting speeds and under adverse process conditions. The coating increases surface hardness and wear resistance while the tough substrate maintains edge stability; together these characteristics prolong service life and help preserve component surface quality. This makes the insert especially suitable where interrupted cutting or lower speed strategies are chosen to protect the workpiece or to manage heat input. Compatibility and system integration for fast changeovers Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation ensures interchangeability with matching CNMG holders and boring bars. The insert is supplied with a cylindrical hole for secure clamping, and its rhombic shape with an 80° included angle offers a balance between strength and accessibility in external and internal turning. Replacement is straightforward and repeatable, supporting short tool-change cycles and consistent part accuracy. For process-oriented advice on using Tungaloy CNMG160608 T9235 inserts and immediate availability contact Metav Werkzeuge for tailored application support. Technical data Article number: 6785920 Manufacturer SKU: TUN6785920 Label / SKU: 6785920-Tungaloy Series: ISO turning indexable inserts Core data ISO designation: 160608 Size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Special features Material: carbide Coating: CVD-coated Shape: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert intended for? The CNMG160608 T9235 insert is designed primarily for machining steel, with the T9235 grade optimised for tougher conditions and lower cutting speeds. How does the chipbreaker affect machining stability? The double-sided chipbreaker on the insert improves chip control and evacuation, which enhances stability during interrupted cuts and reduces the chance of chip-related surface defects. How is compatibility with holders ensured? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; matching CNMG holders and clamping systems are required for correct mounting. What benefits does the CVD coating provide? The CVD coating increases surface hardness and wear resistance while the tough carbide substrate preserves edge integrity, together improving tool life and consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD‑coated carbide and a sharp cutting edge for extended tool life and consistent surface quality; the rhombic 80° geometry and double‑sided chipbreaker support flexible external and internal turning. Order the CNMG160612 AH120 insert via Metav Werkzeuge or consult our experts for holder compatibility and process optimisation. CNMG160612 AH120 — ISO turning insert for turning by Tungaloy CNMG160612 AH120 is an ISO‑standard indexable insert designed for versatile external and internal turning applications where a sharp edge and reliable process security are required. PVD-coated carbide for long tool life Sharp cutting edge for consistent surface finish ISO CNMG 160612 with 80° rhombic geometry Consistent edge performance for repeatable turning The indexable insert delivers stable cutting performance thanks to the combination of a PVD coating and a wear‑resistant carbide substrate. This pairing reduces flank wear and supports predictable tool life, which in turn lowers tooling costs per part. The sharp edge geometry is particularly effective when high process reliability is a priority, enabling steady chip formation and repeatable surface quality across batch production. Secure seating and versatile holder compatibility Constructed to ISO dimensions, the insert matches common clamping systems when the holder’s form, clearance angle, tolerance class, fastening method, size and thickness correspond. The rhombic 80° geometry and the cylindrical hole provide reliable positioning and secure clamping in compatible external holders or boring bars. Selecting the correct tolerance class and clamping accessories is central to achieving stable cutting conditions and minimising vibration during turning. Coating and substrate engineered for productivity The AH120 grade is a PVD‑coated carbide designed to resist wear and chipping under typical turning loads. The coating improves thermal and abrasive resistance while the substrate maintains edge integrity; the result is reduced cutting edge deterioration and fewer insert changes. For workshops aiming to boost throughput, this combination supports higher cutting speeds and prolonged uninterrupted machining cycles. Practical application and process advantages With a double‑sided chipbreaker and a 1.2 mm corner radius option, the insert adapts to a range of material families and turning tasks, from finishing passes to more robust light roughing. The ISO format and proven design reduce setup time when replacing inserts, supporting quick index changes and minimal downtime. Together, these attributes contribute to measurable productivity gains and consistent part quality. For assistance selecting compatible holders or to place an order for Tungaloy inserts, contact Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants are available to advise on process optimisation and holder matching Technical Data Article number: 6802250 Manufacturer article number: 6802250 Manufacturer SKU: TUN6802250 SKU: 6802250-Tungaloy Designation: CNMG160612 AH120 Tungaloy‑Wendeplatte Facts Geometry angle: 80° Clearance angle: 0° Plate size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Special features Material: carbide Coating: PVD coating (AH120 grade) Chipbreaker: double‑sided Plate shape: rhombic (CNMG) Hole: with cylindrical hole Model series: ISO turning indexable inserts Application: turning FAQ What machining tasks is this insert suitable for? The CNMG160612 AH120 insert is optimized for both external and internal turning operations, offering wear resistance and a sharp cutting edge suitable for finishing and light roughing. How does the AH120 grade affect tool life? The AH120 PVD coating combined with a carbide substrate increases wear and chipping resistance, so the CNMG160612 AH120 maintains cutting performance for longer intervals compared with uncoated grades. Is the insert compatible with standard ISO CNMG holders? Yes; the insert conforms to ISO CNMG dimensions and will fit compatible holders when form, clearance angle, tolerance class, fastening and size match the holder specifications. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160612 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide, robust 1.2 mm edge radius and ISO compatibility for consistent turning performance; order the CNMG160612 AH120 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 160612 AH120 – ISO turning insert for Drehen by Tungaloy The CNMG 160612 AH120 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a wear-resistant PVD-coated carbide grade for demanding machining tasks. CNMG160612 geometry, ISO-standard insert PVD-coated carbide AH120 for wear resistance 0° clearance angle, 80° included angle Double-sided with central hole for secure clamping Consistent process security through a wear-resistant grade The CNMG insert is supplied in the AH120 PVD-coated carbide grade, engineered for a balance of sharp cutting edge and high process security. The PVD coating reduces flank and crater wear, which translates into longer effective tool life and fewer indexings in serial production. Because the grade is optimised to resist both wear and chipping, operators benefit from predictable tool behaviour during interrupted cuts and medium-to-high cutting speeds. This reliability results in reduced machine downtime and more consistent part quality. Robust geometry for stable cutting and secure clamping With a 1.2 mm corner radius and a plate thickness of 6.35 mm, the geometry offers a durable cutting edge that tolerates moderate cutting forces while maintaining surface finish. The insert’s 80° included angle and 0° clearance angle make it suitable for general turning profiles where strength at the cutting edge is important. The central cylindrical hole and double-sided design enable secure mounting in ISO-compatible holders and two usable cutting edges per index, improving cost efficiency per edge and simplifying inventory handling for workshops. Application guidance and selection for optimal results Select a double-sided chipbreaker and the AH120 grade to match alloy and process stability: this configuration is particularly appropriate when a sharp cutting edge and process security are both required. The insert is intended for turning applications and integrates into a system comprising an ISO insert, compatible external holder or boring bar, support pad or clamp set, and replacement clamp screws. For best results, pair the insert with a holder that matches form, clearance, tolerance class, clamping method, size and thickness to ensure repeatable clamping accuracy and stable cutting conditions. For personalised assistance with tool selection, machining parameters or to order the CNMG 160612 AH120 from Metav Werkzeuge please contact our team via info@metav-werkzeuge.com or call +49 2822 7131930 — we will advise on the optimal grade and holder combination for the intended turning application. Technical Data Article number: 6811649 Manufacturer SKU: TUN6811649 SKU: 6811649-Tungaloy Model series: ISO turning indexable inserts Designation: CNMG160612 AH120 Tungaloy insert Facts Radius: 1.2 mm Thickness: 6.35 mm Insert size: 16 mm Included angle: 80° Clearance angle: 0° Hole: with central cylindrical hole Special features Coating: PVD Material: carbide Grade: AH120 Application: turning (external and internal) Chipbreaker: double-sided Plate shape: rhombic Double-sided for two usable cutting edges ISO-compatible geometry for standard holders FAQ What materials is this insert suitable for? The CNMG 160612 AH120 insert is a PVD-coated carbide grade intended for turning a broad range of materials where wear resistance and edge integrity are required; choose the specific chipbreaker and cutting data to match the workpiece material. How does the AH120 grade benefit production runs? AH120 provides improved wear and breakage resistance; in production it offers longer tool life and consistent performance, reducing the need for frequent indexing and helping to maintain dimensional stability across batches. Can the insert be used in both external turning and internal boring? Yes, the ISO rhombic geometry and 80° included angle allow the insert to be used in compatible external turning holders and in appropriate boring bars for internal turning applications. How many cutting edges are available per insert? The double-sided design gives two usable cutting edges; combined with secure clamping via the central cylindrical hole this enables efficient edge utilisation and reliable clamping repeatability. Which holders are compatible with this insert? Compatibility is determined by the insert form, clearance angle, tolerance class, clamping method, size and thickness; use ISO-compatible turning holders or boring bars that accept CNMG inserts to ensure correct fit and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120 for wear resistance, the CNMG160612 ISO geometry for secure clamping and the double-sided chipbreaker for reduced tool-change frequency — order directly via Metav Werkzeuge or consult our specialists for application support. CNMG160612 AH120 — ISO turning insert by Tungaloy, rhombic 80° The CNMG160612 AH120 is an ISO rhombic turning insert designed for external and internal turning where a sharp cutting edge and high process security are required. CNMG160612 insert for ISO turning PVD-coated carbide grade AH120 Double-sided chipbreaker for stable chips Rhombic 80° geometry, 1.2 mm corner radius Consistent edge life through advanced coating and grade The PVD-coated AH120 carbide combines a hard, wear-resistant surface with a substrate designed to resist chipping; this yields a consistent cutting edge and predictable tool life under varied operating conditions. For production environments seeking efficiency, the coating reduces flank and crater wear, contributing to longer intervals between indexings and fewer unscheduled tool changes. The outcome is improved uptime and a smoother machining flow, especially where repeatability and surface quality are priorities. Geometry and chip control that support stable turning operations The rhombic ISO form with an included angle of 80° and a 1.2 mm corner radius delivers a balance between edge strength and surface finish. The insert’s double-sided chipbreaker promotes controlled chip formation across different cutting depths, aiding evacuations and reducing the risk of built-up edge. Compatibility with the clamping system is determined by holder form, clearance angle, tolerance class, fastening, size and thickness, ensuring secure seating and stable cutting conditions when the correct holder and clamping set are selected. System approach for fewer tool changes and predictable costs Being double-sided and indexable, the insert reduces tooling consumption per part and simplifies inventory handling. The standardised ISO designation supports quick matching to commercial holders and clamping kits, while the 6.35 mm plate thickness and cylindrical centre hole allow simple, repeatable mounting. Together, these features support a cost-effective production rhythm and enable planning for tool-change intervals based on measured wear rather than guesswork. Practical application advice and process security Select the chipbreaker and grade to match workpiece material, machining type and machine stability; the AH120 grade is optimised for wear and chipping resistance where a sharp edge and reliable performance are demanded. The insert is supplied as part of an ISO insert system comprising the insert, a suitable external holder or boring bar, a backing/clamp set and replacement screws. Establishing the correct assembly and clamping torque ensures reproducible results and supports the rated performance of the cutting edge. For ordering or technical advice on Tungaloy ISO turning inserts such as this AH120 grade, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultancy and supply. Technical data Article number: 6802239 SKU: 6802239-Tungaloy Manufacturer SKU: TUN6802239 Model series: ISO-Drehwendeschneidplatten Material: carbide ISO designation: CNMG160612 Numbers / Core technical data Included angle: 80° Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 16 mm Free angle: 0° Centre hole: with hole (cylindrical) Special features / Versions Grade/coating: AH120, PVD-coated Insert shape: rhombic (CNMG) Chipbreaker: double-sided Application: Turning (external and internal) Compatibility defined by holder form, clearance angle, tolerance class, fastening, size and thickness FAQ What applications suit this insert best? The CNMG160612 AH120 insert is intended for external and internal turning where a sharp cutting edge and process security are required; it is designed to deliver stable performance in production turning tasks. How does the AH120 grade affect performance? The PVD-coated AH120 grade provides wear resistance and chipping protection, improving edge life and supporting predictable machining results with this indexable turning insert. How is holder compatibility ensured? Compatibility depends on matching holder form, clearance angle, tolerance class, fastening method, size and thickness; verify these parameters against the CNMG160612 dimensions before assembly. Is the insert indexable and easy to service? Yes — the double-sided chipbreaker on the CNMG160612 allows indexing to a fresh edge, reducing changeover frequency and simplifying tool handling on the shop floor. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 AH6225 Wendeplatten - Tungaloy
Efficient productivity and reliable edge life stem from the combination of a PVD‑coated carbide grade engineered for stainless steels and a 1.2 mm corner radius that balances sharpness with toughness; the ISO rhombic geometry and 80° included angle ensure broad holder compatibility and stable turning. Order the CNMG160612 AH6225 insert directly via Metav Werkzeuge or consult our specialists for application guidance. CNMG160612 AH6225 ISO rhombic turning insert — PVD‑coated carbide, 80° angle (Tungaloy) A CNMG160612 AH6225 rhombic ISO turning insert designed for external and internal turning, optimised for machining stainless steels under varying conditions ISO rhombic insert, 80° included angle PVD-coated carbide for stainless steels 1.2 mm corner radius for stable edges Double-sided chipbreaker, cylindrical hole Stable edges and wear resistance for stainless steel work The combination of a PVD‑coating with a robust carbide substrate gives the insert a sharp yet durable cutting edge that performs reliably in medium turning tasks on stainless steels. The AH6225 grade is formulated to maintain a stable cutting edge under fluctuating cutting conditions, reducing flank wear and edge chipping. This results in consistent component quality and longer intervals between indexings, supporting uninterrupted production runs and predictable tool-change schedules. Interchangeability and secure clamping for rapid setup Built to ISO form specifications, the rhombic geometry with an 80° included angle ensures compatibility across standard external holders and boring bars. The cylindrical hole facilitates secure clamping and correct seating in many clamping systems, minimising runout and vibration. Clear ISO conformity shortens setup times, simplifies tool inventory and enables fast replacement with matched tolerances, which collectively contribute to higher machine utilisation and reduced setup-related downtime. Controlled chips and improved surface quality The double-sided chipbreaker is engineered for reliable chip control during both external and internal turning. Effective chip management reduces the risk of entanglement in the cutting zone, helps maintain coolant contact and supports a consistent surface finish. In applications where process stability varies, this chip control capability assists in achieving repeatable results and reduces manual interventions, enhancing overall process reliability. Versatility, application scope and economic benefits With a 1.2 mm corner radius and a plate thickness of 6.35 mm, the insert is suited to medium turning operations where a compromise between finish and edge strength is required. The grade’s balanced properties make it a pragmatic choice for shops processing a range of stainless steel grades under changing conditions. The resulting combination of tool life and machining stability contributes to lower unit costs through fewer indexings and less scrap, supporting a demonstrable return on tooling investment over production cycles. Contact Metav Werkzeuge for tailored recommendations on integrating this Tungaloy insert into existing tool systems and to obtain the CNMG160612 AH6225 (SKU TUN6903181) for your machining needs Technical Data Article number: 6903181 Manufacturer SKU: TUN6903181 Supplier SKU: 6903181-Tungaloy ISO designation: CNMG160612 Grade: AH6225 Core dimensions Corner radius: 1.2 mm Included angle: 80° Thickness: 6.35 mm Size: 16 mm Special features PVD-coated carbide Rhombic plate form Cylindrical hole Double-sided chipbreaker Suitable for turning (external and internal) Compatible with ISO holders FAQ What materials is this insert suitable for? The CNMG160612 AH6225 insert is optimised for machining stainless steels, with the AH6225 grade and PVD‑coating tailored to resist built-up edge and maintain a stable cutting edge in such materials. What does the AH6225 grade signify? AH6225 denotes a PVD‑coated carbide grade designed to combine a sharp cutting edge with toughness, making the insert suitable for medium cutting conditions and varying stability when machining stainless steels. Will the CNMG160612 fit standard ISO holders? Yes — the CNMG160612 conforms to ISO rhombic dimensions with an 80° included angle and features a cylindrical hole for secure clamping, promoting compatibility with many standard external holders and boring bars. How does the chipbreaker affect machining performance? The double-sided chipbreaker assists in controlled chip formation and evacuation during turning, which helps preserve the surface finish, stabilise cutting forces and reduce manual chip handling in automated or semi-automated setups. What applications are recommended for this insert? This insert is recommended for external and internal turning in medium‑duty operations, where a balance between finish and edge strength is required; it performs especially well where stainless steels are predominant. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 AH6225 Wendeplatten - Tungaloy
Combine the PVD-coated carbide AH6225 with the 80° rhombic geometry and a 1.2 mm corner radius for stable, economical medium turning of rostfreien Stahl; robust chip control and the double-sided design reduce downtime and spare-part variety. Order the insert directly via Metav Werkzeuge or ask the Metav consultants for application guidance. CNMG 160612 AH6225 CNMG160612 indexable insert – PVD-coated carbide for turning (80° rhombic, 1.2 mm radius) by Tungaloy CNMG160612 AH6225 is an ISO-format indexable insert for general turning, designed for medium machining of rostfreien Stahl and variable production conditions PVD-coated carbide grade AH6225 Optimised for rostfreien Stahl turning 80° rhombic form with cylindrical hole Double-sided insert, 1.2 mm corner radius Consistent cutting performance under mixed conditions The PVD-coated carbide grade AH6225 delivers a balance between a sharp and stable cutting edge, specifically optimised for machining rostfreien Stahl in medium-duty operations. The combination of the coating and the substrate increases resistance to built-up edge and abrasive wear, which translates into longer effective cutting life and fewer tool changes. The 1.2 mm corner radius stabilises the edge for reliable chip formation while the rhombic 80° geometry provides a compromise between strength and access—benefits that improve cycle-time predictability and part finish without sacrificing economy. Quick integration into ISO tooling systems and secure clamping This ISO-format insert conforms to established holder interfaces; compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness, so the correct match with a suitable external holder or boring bar is essential. The insert measures with a nominal size of 16 and a plate thickness of 6.35 mm, presented double-sided with a cylindrical hole, enabling reversal to extend service life. The standardised design simplifies stocking: a single SKU covers two usable edges per side, supported by common shims, clamping kits and replacement screws for straightforward assembly in most ISO-compatible turning systems. Productivity advantages and application guidance The CNMG160612 AH6225 insert is intended for external and internal turning where moderate material removal and changing workpiece conditions occur. The double-sided chipbreaker design assists in controlled chip segmentation across varying feed rates, reducing interruptions and protecting the workpiece surface. Selecting the appropriate chipbreaker and grade according to component rigidity and cutting parameters optimises results; in less stable set-ups a smaller depth of cut or reduced feed helps maintain edge life. The combination of these design choices supports higher process reliability and efficient part output with predictable tool-change intervals. Contact Metav Werkzeuge for tailored selection advice on Tungaloy turning inserts and to ensure the correct holder and chipbreaker match for the intended rostfreien Stahl application Technical Data Article number: 6903172 Manufacturer SKU: TUN6903172 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH6225 Core measurements ISO designation: CNMG160612 Inscribed size: 16 Plate thickness: 6.35 mm Corner radius: 1.2 mm Geometry angle: 80° Hole style: cylindrical hole Special features Double-sided chipbreaker Rhombic plate form PVD-coated carbide Use: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert suitable for? This CNMG160612 AH6225 insert is formulated for rostfreien Stahl and general turning tasks where a durable, sharp cutting edge is required. Can the insert be flipped or reversed? Yes, the insert is double-sided; both sides can be used to extend service life, subject to correct orientation in the clamping system. Which holder characteristics must be checked for compatibility? Compatibility is determined by the insert form, clearance angle (0° free angle), tolerance class, attachment method, size and thickness; ensure the holder supports a CNMG 80° rhombic insert with a cylindrical hole. How does the PVD coating affect cutting performance? The PVD-coated carbide grade improves wear resistance and helps maintain a sharp edge under changing conditions, enhancing tool life and surface quality on rostfreien Stahl. Is this insert suitable for finishing and semi-finishing? The geometry and 1.2 mm corner radius make it suitable for medium machining and semi-finishing; for delicate finishing pass parameters should be adjusted to reduce edge load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 AH6235 Wendeplatten - Tungaloy
Benefit from a robust combination of a PVD-coated AH6235 grade and proven CNMG geometry for reliable turning of stainless steels and interrupted cuts; this ensures stable chip formation and extended tool life. Order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. CNMG 160612 AH6235 Tungaloy Turning Insert — CNMG160612, PVD-coated carbide, 80° rhombic A CNMG160612 AH6235 indexable turning insert designed for machining stainless steels and interrupted cuts, compatible with ISO-standard holders and modular turning systems PVD-coated AH6235 grade for toughness and wear resistance 80° rhombic geometry for stable external and internal turning 1.2 mm nose radius for balanced strength and finish Double-sided chipbreaker for extended insert life Outstanding performance for demanding stainless-steel turning The combination of a PVD-coated surface and the AH6235 tough carbide substrate delivers a balance between wear resistance and fracture toughness, specifically engineered for stainless steel and operations with increased breakout risk. This results in more consistent process behaviour under interrupted cuts and variable chip loads. The treated surface reduces built-up edge and improves tool life, while the substrate maintains edge integrity when encountering workpiece variability. Precise geometry reduces vibrations and setup time An ISO-conforming rhombic shape with an 80° geometry ensures predictable engagement with the workpiece and good support in standard turning holders. The cylindrical hole and standard seat dimensions make the insert straightforward to mount in compatible toolholders; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. The standardised geometry simplifies inventory and holder selection for production environments. Improved process reliability and surface quality A 1.2 mm radius provides a robust cutting point that balances surface finish and edge strength, reducing premature chipping when machining tough alloys. The double-sided chipbreaker aids in controlled chip formation, lowering the risk of tangles and facilitating efficient chip evacuation. These features support higher metal removal rates with predictable tool wear, contributing to improved throughput and fewer unscheduled tool changes. Practical integration into indexable systems and toolrooms The insert is part of an ISO turn insert series and forms an indexable system together with a compatible external holder, shim/clamp set and fastening screws. Its specification supports both external and internal turning operations; the selection of chipbreaker and grade should match the workpiece material and operation stability. For application matching, Metav Werkzeuge offers technical consulting and material-specific recommendations to ensure the insert is deployed where it performs best. Request application advice from Metav Werkzeuge for optimal deployment of Tungaloy CNMG160612 AH6235 inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical data Article number: 6903360 SKU: 6903360-Tungaloy Manufacturer item number: 6903360 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Application: Drehen Designation: CNMG160612 Grade: AH6235 Manufacturer: Tungaloy Facts Nose radius: 1.2 mm Cutting angle: 80° Clearance (relief) angle: 0° Plate thickness: 6.35 mm Plate size: 16 mm Mounting: with cylindrical hole Special features PVD-coated carbide grade AH6235 Double-sided chipbreaker Rhombic plate form Cylindrical mounting hole ISO-standardised turning insert Suited for stainless steel and interrupted cuts Compatible with standard indexable turning holders For use in external and internal turning applications FAQ Is this insert suitable for machining stainless steel? The CNMG160612 AH6235 Tungaloy insert is specifically designed for stainless steel applications and interrupted cuts, offering improved fracture resistance and stable chip control. Which holders fit this insert? Holders that accept CNMG-style inserts with an 80° rhombic seat and a cylindrical mounting hole are compatible; ensure the holder matches the insert thickness, size and tolerance class. What is the nose radius and why does it matter? This insert has a 1.2 mm nose radius; that radius provides a compromise between strength and surface finish, reducing the likelihood of chipping while maintaining good workpiece quality. Is the chipbreaker single- or double-sided? The insert features a double-sided chipbreaker, allowing index rotation and extended life before reconditioning or replacement. What coating and substrate does the insert have? The grade is AH6235, a PVD-coated carbide formulation chosen for toughness and resistance to thermal and mechanical stresses in demanding turning operations. Can this insert be used for both external and internal turning? Yes; the rhombic geometry and ISO-standard dimensions make it suitable for both external and internal turning when used with an appropriate holder and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 AH8005 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8005 carbide grade, ISO CNMG160612 geometry and a double‑sided chipbreaker to achieve longer edge life and consistent turning results; order directly via Metav Werkzeuge or consult our specialists for application support. CNMG 160612 AH8005 – Turning Insert (ISO CNMG160612, PVD-coated Carbide) by Tungaloy The CNMG160612 AH8005 is an ISO‑standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys and hard materials, offering wear resistance and process stability in demanding machining tasks ISO CNMG160612 format, rhombic 80° geometry PVD‑coated carbide AH8005 for wear resistance Double‑sided chipbreaker for stable cutting 16 mm size, 6.35 mm thickness, R1.2 corner Predictable cutting performance through hardened grade and coating The combination of a PVD‑coated surface and a wear‑resistant AH8005 carbide composition delivers reliable resistance to abrasion and thermal load. This results in more predictable tool life and fewer unexpected interruptions in production. For turning applications on heat‑resistant alloys and relatively hard workpieces, the treated cutting edge maintains form under steady cutting conditions, which supports consistent surface quality and reduces the need for frequent insert changes. The treated edge also assists in maintaining tolerance accuracy over longer runs. Quick interchangeability and stable clamping for reduced downtime Built to the ISO CNMG160612 format with a rhombic, 80° main cutting geometry and a cylindrical hole for secure fastening, the insert is compatible with standard CNMG holders when form, clearance angle and tolerance class match. The ISO standardisation supports straightforward replacement and inventory management, while the supplied geometry ensures a stable seating and minimal micro‑movement during cutting. The practical outcome is reduced setup time and improved repeatability across series production. Better chip control and process security with a double‑sided chipbreaker The integrated double‑sided chipbreaker promotes controlled chip formation across a range of feeds and depths of cut, lowering the likelihood of entangling or long, stringy chips that can harm the workpiece or tool. In combination with a stable machine setup, this feature enhances process reliability and helps to secure reproducible results in both roughing and finishing passes. Choosing the correct chipbreaker and grade according to the workpiece material and machining stability further optimises productivity. Geometry and dimensions that support versatile turning tasks With a 16 mm inscribed circle, 6.35 mm thickness and an R1.2 corner radius, the insert suits operations where a balance between edge strength and accuracy is required. The 0° clearance angle and rhombic shape make it suitable for a variety of external and internal profiles, while the robust carbide substrate provides the rigidity necessary for interrupted cuts in stable setups. These dimensions are especially useful where a compromise between fine surface finish and economical material removal is sought. For application advice, to check holder compatibility or to secure CNMG160612 AH8005 inserts for immediate delivery, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical support and ordering assistance Technical data Article name: CNMG160612 AH8005 Tungaloy turning insert Manufacturer article number: 6741645 SKU: 6741645-Tungaloy Manufacturer SKU: TUN6741645 Model series: ISO‑Drehwendeschneidplatten Facts Insert designation: CNMG160612 Shape: rhombic, 80° geometry Size: 16 mm (inscribed circle) Thickness: 6.35 mm Corner radius: R1.2 Relief angle: 0° Hole: with hole, cylindrical hole Chipbreaker: double‑sided Special features Carbide substrate (Hartmetall) PVD‑coated cutting surface Intended for turning (external and internal) Suited for heat‑resistant alloys and hard materials ISO‑standard format for compatibility with CNMG holders FAQ How well does this insert handle heat‑resistant alloys? The CNMG160612 AH8005 grade, with its PVD‑coating and wear‑resistant carbide composition, is engineered to withstand the thermal and abrasive stresses typical of heat‑resistant alloys, offering extended edge life under stable cutting conditions. Is the geometry compatible with standard CNMG holders? Yes—being ISO CNMG160612 format with a rhombic 80° geometry and a cylindrical hole, the insert is compatible with holders designed for CNMG inserts provided that form, free angle and tolerance class match the holder specifications. Which workpiece materials are recommended for this grade? The AH8005 grade is optimised for heat‑resistant alloys and harder materials; it also performs well on a broad range of steels when machining conditions and machine stability are appropriate. What benefit does the double‑sided chipbreaker provide? The double‑sided chipbreaker ensures controlled chip formation, improving process security and surface finish while reducing the risk of chip interference during both roughing and finishing operations. How should one choose the correct insert for a specific turning task? Select the insert based on workpiece material, machine rigidity and the stability of the setup; the CNMG160612 AH8005 is suitable where wear resistance and thermal stability are priorities—Metav Werkzeuge can advise on matching holder geometry and cutting data. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160612 AH8015 Wendeplatten - Tungaloy
Benefit from balanced wear resistance and edge stability together with ISO compatibility for dependable turning performance; the PVD-coated carbide grade extends tool life while the rhombic 80° geometry supports versatile external and internal turning. Order these indexable inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG160612 AH8015 CNMG 160612 Turning insert by Tungaloy — PVD-coated carbide, rhombic 80° geometry CNMG160612 AH8015 is a precision indexable turning insert designed for general-purpose and heat-resistant-alloy turning applications ISO-compatible CNMG geometry PVD-coated carbide AH8015 grade Double-sided chipbreaker for versatility 1.2 mm corner radius, 80° rhombic shape High productivity on heat-resistant alloys through balanced grade design The PVD-coated carbide of this insert delivers a balance between wear resistance and cutting-edge stability, making it a practical first choice for the machining of heat-resistant alloys. The coating improves thermal resistance and adhesion at the cutting edge, which reduces flank wear under elevated temperatures. With a corner radius of 1.2 mm and a robust edge form, the geometry supports stable chip formation and predictable tool life, lowering the cost per cutting edge in series production. Assured holder compatibility and secure mounting for stable cuts Compatibility with toolholders follows the ISO system: the fit depends on the insert form, relief angle (0°), tolerance class, fastening method, size and 6.35 mm thickness. The rhombic CNMG shape with a cylindrical hole ensures secure clamping in standard CNMG seats and simplifies index changes. This mechanical stability, combined with the 80° included angle, provides rigidity during heavier roughing passes while still permitting fine finishing, so machining setups remain both predictable and repeatable. Versatile chip control and economical edge usage The double-sided chipbreaker provides two usable cutting edges per side, extending effective life and reducing tooling costs. Selecting the correct chipbreaker style and the AH8015 grade according to workpiece material and machine stability optimises surface finish and cycle time. The geometry and coating together promote consistent chip flow and less edge chipping, which supports higher uptime and fewer in-process interruptions — an advantage for both job shops and production lines seeking process reliability. For machining heat-resistant alloys with reliable repeatability, choose the Tungaloy AH8015 CNMG insert and contact Metav Werkzeuge for tailored cutting-parameter advice and procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6741646 SKU: 6741646-Tungaloy Manufacturer SKU: TUN6741646 Model series: ISO turning inserts Designation: CNMG160612 Facts Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed size: 16 mm Included angle: 80° Relief angle: 0° Special features Material: Carbide Coating/grade: AH8015 (PVD-coated carbide) Insert shape: Rhombic Hole: with cylindrical hole Chipbreaker: Double-sided Application: Turning ISO designation: CNMG160612 FAQ What materials is this insert suitable for? The CNMG160612 AH8015 Tungaloy indexable insert (SKU 6741646-Tungaloy) is optimised for general machining of heat-resistant alloys, offering a balanced combination of wear resistance and edge stability. Will this insert fit standard CNMG toolholders? Yes, the CNMG160612 AH8015 insert is ISO-compatible; fit depends on holder form, relief angle, tolerance class, fastening and insert thickness, and it is designed for standard CNMG seats. What are the key dimensions to check when replacing an insert? Check the designation CNMG160612 for inscribed size (16 mm), thickness (6.35 mm), corner radius (1.2 mm) and the 80° geometry to ensure correct seating and clamping. How does the AH8015 grade affect performance? The AH8015 PVD-coated carbide grade provides an even balance between wear resistance and cutting-edge stability, making the insert suitable for demanding alloy machining while keeping tool-change frequency low. Is the chipbreaker reversible and economical? The insert features a double-sided chipbreaker, giving multiple usable edges per insert and improving cost efficiency through extended edge utilisation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 AH905 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, a rhombic 80° geometry and a double-sided chipbreaker for stable material removal and consistent surface finish; order the CNMG160612 AH905 directly via Metav Werkzeuge or request targeted application advice from their consultants. CNMG 160612 AH905 Turning insert — PVD-coated carbide, 80° rhombic — Tungaloy The CNMG160612 AH905 indexable insert is an ISO-standard rhombic turning insert designed for external and internal turning, offering a sharp cutting edge and high process security. Rhombic 80° insert geometry PVD-coated carbide AH905 grade Double-sided chipbreaker for stability Cylindrical hole, ISO holder compatible Greater process security with a sharp, wear-resistant cutting edge The CNMG160612 AH905 combines a PVD-coated carbide substrate with a grade developed for wear and chipping resistance, ensuring a consistently sharp cutting edge under stable cutting conditions. The PVD coating reduces adhesive wear and improves edge integrity, which translates into fewer unplanned tool changes and more predictable component tolerances. For operations that require repeatable quality—such as batch turning of critical diameters—the enhanced edge life contributes directly to reduced cycle variability and improved first-pass yield. Smooth integration into ISO turning systems for efficient set-up Designed to the ISO turning plate format, this rhombic insert with an 80° included angle and 0° relief fits standard external holders and boring bars when form, clearance angle, tolerance class, fastening, size and thickness match. The rhombic shape and cylindrical hole facilitate secure clamping and simple positioning, while the double-sided chipbreaker offers predictable chip control and can reduce inventory by providing two usable cutting positions. This compatibility simplifies toolset management on the shopfloor and supports faster changeovers in multi-operation cells. Practical benefits for workshop productivity and process reliability Beyond material advantages, the insert’s geometry and grade support stable chip formation and consistent surface finish, which benefits downstream operations and reduces rework. The double-sided design enhances cost-effectiveness by extending usable life per insert and the carbide core maintains cutting-edge strength at typical turning speeds. Technical advice and matching holder recommendations are available from Metav Werkzeuge to ensure the selected chipbreaker and grade align with component material and machining strategy, helping to optimise throughput and tool utilisation. For proven process security with a sharp cutting edge, contact Metav Werkzeuge to discuss application-specific recommendations and to secure the CNMG160612 AH905 turning insert from Tungaloy. Technical data Article number: 6859353 Manufacturer SKU: TUN6859353 SKU: 6859353-Tungaloy Model series: ISO turning indexable inserts Designation: CNMG 160612 AH905 Key figures Included angle: 80° Thickness: 6.35 mm Inscribed circle / size: 16 mm Corner radius: 1.2 mm Relief angle: 0° ISO code: 160612 Special features Material: Carbide Coating / grade: AH905 (PVD-coated) Plate shape: Rhombic Hole: With cylindrical hole Chipbreaker: Double-sided Application: Turning (external and internal) Compatibility: ISO-standard insert fit FAQ What benefits does the AH905 coating provide? The AH905 PVD-coated grade improves wear resistance and edge stability, helping the insert maintain a sharp cutting edge and reduce chipping during turning operations. Which turning tasks is this insert intended for? This rhombic insert is intended for both external and internal turning; the geometry and chipbreaker make it suitable where a sharp edge and process security are required. Will the insert fit standard ISO holders? Compatibility with ISO holders is determined by form, free angle, tolerance class, fastening, size and thickness; the CNMG160612 is manufactured to ISO dimensions and is compatible when the corresponding holder matches these parameters. How does the double-sided chipbreaker affect tool use? The double-sided chipbreaker offers repeatable chip control and extends usable life by allowing indexing to a second cutting position, increasing cost efficiency per insert. How can the product be identified for reordering? Use the designation CNMG160612 AH905 and the article number 6859353 or SKU 6859353-Tungaloy to ensure the correct Tungaloy turning insert is specified. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T5105 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for high-speed cast iron turning, combined with ISO CNMG geometry and a 1.2 mm corner radius for predictable tool life and surface consistency; order directly via Metav Werkzeuge or contact our consultants for application advice. CNMG160612 T5105 turning insert by Tungaloy — ISO rhombic geometry, CVD-coated carbide CNMG160612 T5105 is an ISO rhombic turning insert developed for high-speed external and internal turning of cast iron under stable machining conditions. ISO rhombic CNMG 160612 geometry CVD-coated carbide for high-speed cutting Double-sided chipbreaker for stable swarf Cylindrical-hole design for secure clamping Consistent high-speed performance for cast iron The CVD-coated carbide grade T5105 offers a balance of wear resistance and toughness tailored to high-speed machining of cast iron. The coating reduces flank wear and extends usable life during uninterrupted cuts, which translates into fewer insert changes and steadier cycle times. For production or job-shop environments that prioritise throughput, this grade maintains edge integrity while preserving workpiece quality. Reliable clamping and dimensional stability With a cylindrical hole and ISO CNMG form, this insert ensures precise seating and reproducible positioning in compatible holders. The 80° lead angle and 0° clearance geometry deliver predictable cutting forces, while the 1.2 mm corner radius smooths transitions to improve edge strength and reduce the risk of chipping. Clear compatibility depends on holder form, tolerance class, attachment type, size and thickness. Efficient chip control for safer, cleaner machining Equipped with a double-sided chipbreaker, the indexable cutting element breaks and guides swarf reliably in stable cutting conditions. This feature helps to avoid long, stringy chips and supports consistent surface finish on cast iron components. Explaining briefly: a chipbreaker modifies the way the cut material curls and fractures, improving evacuation and reducing re-cutting, which benefits both machine uptime and operator safety. Easy selection and integration into turning systems As an ISO-standardised insert, the component integrates with a wide range of external holders and boring bars when the matching specifications are observed. The 6.35 mm thickness and 16 mm size are common in turning tool systems, simplifying stocking and supplier logistics. Technical integration advice is available to confirm holder compatibility and optimal cutting parameters for a given machine setup. For production applications that require dependable high-speed cast iron turning, contact Metav Werkzeuge for procurement of Tungaloy CNMG160612 T5105 inserts and personalised machining recommendations; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance. Technical data Article number: 6852899 Manufacturer SKU: TUN6852899 Product label: CNMG160612 T5105 Tungaloy-Wendeplatte Specifications Corner radius: 1.2 mm Insert size: 16 mm Thickness: 6.35 mm Clearance angle: 0° Lead angle: 80° Special features Material: carbide Coating: T5105 (CVD) Chipbreaker: double-sided Hole: cylindrical Form: rhombic (CNMG) Typical application: turning (external and internal) FAQ What materials is this insert designed for? The T5105 grade is formulated for high-speed machining of cast iron; the CNMG160612 insert performs best under stable cutting conditions with appropriate holders. Can the insert be used on internal turning operations? Yes, the ISO CNMG form and cylindrical-hole configuration allow use in both external and internal turning setups when a compatible boring bar or holder is employed. How does the chipbreaker affect surface finish? The double-sided chipbreaker promotes controlled chip formation and evacuation, which supports a consistent surface finish on cast iron workpieces and reduces interruption from chip entanglement. Is the insert reversible or single-use per edge? The CNMG geometry is double-sided; each side provides a usable cutting edge, offering multiple indexing positions before replacement. Which parameters determine holder compatibility? Holder compatibility is governed by the insert form, clearance angle, tolerance class, attachment method, size and thickness; confirm these matches with the chosen toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T5105 grade and the robust 80° rhombic CNMG geometry for efficient, high-speed turning of cast iron under stable conditions; the insert’s secure cylindrical hole and tolerance to ISO mounting ensure repeatable assembly and reliable productivity. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. CNMG160612 T5105 CNMG Turning Insert for Turning by Tungaloy — CVD-coated carbide for cast iron machining CNMG160612 T5105 Tungaloy insert is a rhombic ISO indexable insert designed for turning operations, offering a wear-resistant CVD coating and geometry suited to high-speed machining of cast iron under stable setups. CVD-coated T5105 carbide grade 80° rhombic form with 1.2 mm radius Double-sided chipbreaker for stable cutting Cylindrical hole, compatible with ISO holders Faster cycle times with a wear-resistant CVD grade The T5105 grade is a CVD-coated cemented carbide developed for high-speed machining of cast iron, delivering prolonged tool life where cutting speeds are elevated and conditions are stable. The coating reduces flank wear and improves resistance to abrasive particles commonly found in grey and nodular cast irons, which in turn sustains dimensional accuracy across longer production runs. For manufacturers aiming to increase throughput without compromising surface quality, this insert provides a concrete performance advantage by lowering frequency of index changes and maintaining consistent cutting behaviour. Consistent part quality thanks to precision geometry The 80° rhombic plate form with a 1.2 mm corner radius produces a controlled cutting edge suitable for both external and internal turning. The specified 0° clearance and the rhombic outline ensure stable engagement in axial and radial cuts; this geometry supports predictable chip formation and helps reduce vibration when used with an appropriately rigid holder. The insert’s cylindrical hole and standard ISO dimensions promote repeatable clamping and alignment in ISO-compatible toolholders, which is essential for repeatable part tolerances and efficient toolchange procedures on the shop floor. System-level benefits and practical application guidance As part of an ISO insert system, the CNMG160612 requires a matching external holder or boring bar, a suitable clamping set or backplate, and replacement screws to complete the assembly; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The integrated double-sided chipbreaker supports controlled chip segmentation when paired with the correct feed and depth settings, reducing manual chip handling and improving operator safety. For setups with limited rigidity, select a chipbreaker and machining strategy that prioritises stability; where high material removal rates are achievable, the T5105 grade provides the wear resistance needed to maintain edge integrity and surface finish. Contact Metav Werkzeuge for application advice or to request a quote for Tungaloy CNMG160612 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, experienced guidance. Technical data Article number: 6850154 Manufacturer SKU: TUN6850154 Supplier SKU: 6850154-Tungaloy Model series: ISO turning indexable inserts Application: Turning Material: Carbide Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 16 mm Wedge angle: 80° Clearance angle: 0° Special features Grade/coating: T5105 (CVD-coated cemented carbide) Chipbreaker: double-sided Hole: cylindrical hole (with hole) Shape: rhombic (CNMG form) ISO designation: CNMG160612 Compatibility: ISO holders (form, clearance angle, tolerance class, fastening, size, thickness determine fit) FAQ Is this insert suitable for cast iron turning? The CNMG160612 T5105 insert is specified for high-speed machining of cast iron under stable cutting conditions; the T5105 CVD coating and carbide substrate enhance wear resistance for these applications. What holder compatibility is required? Compatibility depends on ISO form, clearance angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole and ISO dimensions allow mounting in standard ISO-compatible turning holders. Which chipbreaker does the insert use and what is its benefit? The insert features a double-sided chipbreaker, which promotes controlled chip formation for stable cutting and improved swarf control during turning operations. What are the key dimensions to check before ordering? Verify the ISO designation CNMG160612, plate size 16 mm, plate thickness 6.35 mm and corner radius 1.2 mm to ensure correct fit with the selected holder and clamping set. Can this grade be used for other materials besides cast iron? The T5105 grade is optimised for cast iron high-speed applications under stable conditions; performance on other materials is not specified and should be assessed with test cuts or by consulting application experts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com