Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —

Summary and Technical Data for KERN Y-Schnittstellenkabel :Manufacturer: KERNSeries: CFSModel: Y-SchnittstellenkabelOrder your new Y-Schnittstellenkabel now Online!

Take advantage of the combination of KERN reliability, rapid dispatch and straightforward integration with weighing systems for uninterrupted measurement workflows; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Analogue Module KFB-A04 – KERN accessory for scales with reliable signal conversion The Analogue Module is a compact accessory designed for integration with weighing equipment, converting and routing analogue signals for measurement and logging applications. Rapid dispatch from Emmerich warehouse Compatible with standard weighing systems Manufactured by KERN for measurement reliability Compact module for analogue signal integration Seamless integration for measurement workflows The analogue module provides a direct route to add analogue outputs to weighing installations, enabling straightforward connection to indicators, data loggers or control systems. Engineered by KERN, the unit focuses on signal conversion and stable transmission, reducing the need for additional interface hardware. For workshops and small production lines this means fewer connection errors and lower setup time, which supports more efficient daily operation without complex configuration. Clear advantages for procurement and logistics Supplied with fast dispatch from our Emmerich centre, the unit shortens lead times and simplifies replenishment planning. Metav Werkzeuge acts as a reliable logistics partner and quality filter for the European market, consolidating supply needs and offering a wide range of measurement accessories. The compact format supports storage efficiency and rapid deployment across multiple workstations, helping to keep production continuity where measurement reliability matters most. Practical technical benefits explained The module handles analogue signal transmission and can be used where a continuous voltage or current output is required for external devices. In plain terms, the unit translates the scale’s output into a standard signal that is easier to record or process by other equipment. This improves data transfer precision and reduces the likelihood of drift or interference, which is particularly valuable in regulated inspections or batch documentation where consistent measurement traces are required. Reliable partner for long-term precision Built by a recognised manufacturer, the accessory is intended for environments that prioritise measurement stability and repeatability. The design emphasises minimal installation complexity and robust performance under routine use, delivering dependable operation without frequent adjustments. For purchasers seeking to centralise supplies, Metav Werkzeuge’s broad catalogue and experienced consultancy further support long-term equipment planning and system compatibility checks. For procurement assistance or technical clarification on the KERN analogue module (KFB-A04), contact Metav Werkzeuge—technical consultants available via e‑mail, phone or WhatsApp and ready to advise on integration and delivery from Emmerich. Technical data Product name: Analogue Module Manufacturer: KERN SKU: KFB-A04 Model code: KFB ECLASS: 27261604 UID: KFB-A04 Facts Category: Scales accessory Delivery note: rapid dispatch Stock location: Emmerich Special features Function: analogue signal conversion Application area: weighing systems and measurement setups Supplier role: Metav Werkzeuge as distributor and quality filter FAQ What interfaces does the module support and how is it connected? The KERN analogue module (SKU KFB-A04) provides standard analogue outputs for connection to indicators and data loggers; connection details vary by installation and should be confirmed with the Metav Werkzeuge technical team. Is the unit compatible with existing scales from different manufacturers? Compatibility is typical for standard weighing systems; the KERN analogue module has been designed for general use with scales, but Metav Werkzeuge can advise on specific compatibility scenarios. Can the module be used for continuous production data logging? Yes, the unit supports continuous analogue signal transmission suitable for production monitoring and data acquisition when paired with a compatible logger or control system. Who supplies the module within Europe and how quickly is delivery arranged? Metav Werkzeuge supplies the KERN analogue module from its Emmerich facility with fast dispatch; contact details are available for precise delivery timing. Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271

Take advantage of the precise integration and proven compatibility of this analogue interface from KERN — a compact module that supports seamless connection to industrial weighing systems and aids consistent measurement workflows. Order the module directly via Metav Werkzeuge or consult our specialists for compatibility checks and technical advice. KERN Analogue Module KFB-A05 — analogue interface for scales and weighing systems The KERN Analogue Module KFB-A05 is a compact analogue interface designed to integrate with industrial scales and weighing equipment for reliable signal handling in production and laboratory environments. Analogue interface for scales and weighing systems Compact format for simple integration Manufacturer: KERN quality assurance Suitable for retrofit in weighing installations Reliable signal integration for consistent weighing results The KERN analogue module serves as an interface that channels analogue outputs from weighing instruments into connected control or display units, helping to maintain signal integrity across production processes. By providing a stable analogue path, the module supports repeatable measurement chains and reduces the need for repeated calibration cycles. This contributes to predictable process control and helps avoid unnecessary stoppages in measurement-critical workflows. Built for straightforward installation and retrofit efficiency A compact design allows the module to be mounted into existing enclosures or integrated during routine equipment upgrades, simplifying installation and minimising downtime. Clear labelling and a concise connection scheme reduce wiring complexity, enabling technicians to complete retrofits more quickly and with fewer errors. The result is faster commissioning of weighing electronics and a shorter route back to full production capacity. Dependable operation that supports production quality Engineered with industrial metrology in mind, the interface focuses on delivering stable analogue outputs that preserve the fidelity of the original weighing signal. This emphasis on reliability supports quality assurance processes by ensuring measurements remain consistent over time. Where consistent readouts are a prerequisite for decision-making, the module helps to safeguard process outcomes and maintain traceable measurement records. Documentation and professional support for installation decisions Technical documentation accompanies the module, detailing connection schemes and typical application scenarios for scales and weighing systems. For organisations requiring compatibility checks or integration advice, Metav Werkzeuge provides expert guidance grounded in decades of metrology experience. This assistance complements the module’s technical data and helps to align the product with specific production or laboratory requirements. For precise integration of weighing electronics, contact Metav Werkzeuge in Emmerich am Rhein for tailored advice and ordering — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: KFB-A05 Manufacturer: KERN Model name: Analogue module ECLASS: 27261604 Numbers / Facts SKU: KFB-A05 Art.-nr.: KFB Special features / Versions Analogue interface for scales Intended for integration with weighing systems Compact format suitable for retrofit FAQ What is the primary function of this analogue module? The analogue module KFB-A05 from KERN provides an analogue interface for scales and weighing systems, enabling stable signal transfer to displays or control units. Can the module be retrofitted into existing weighing installations? Yes. The design of the KFB-A05 supports retrofit installation and is intended for straightforward integration into already-installed weighing equipment. Does the module include documentation for wiring and connection? Documentation for connection schemes and typical applications is provided with the KERN analogue module KFB-A05 to assist technicians during installation. Is the KFB-A05 suitable for laboratory and industrial weighing applications? The module is intended for use with industrial and laboratory scales where analogue signal transmission and consistent measurement integrity are required. Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271