40mm Screw-In Face Mill for APKT 1003 Indexable Inserts 5 Teeth, M16 Thread, 35.5mm Cutting Height - Teknik Makina
€83.00
Product information "40mm Screw-In Face Mill for APKT 1003 Indexable Inserts 5 Teeth, M16 Thread, 35.5mm Cutting Height - Teknik Makina"
Take advantage of the robust compatibility with APKT/APXT 1003 indexable inserts and the secure M16 screw-in mounting to reduce setup time and increase process stability; order the VT148TM via Metav Werkzeuge or consult our specialists for application advice.
VT148TM screw-in milling head — Ø40 mm, M16 threaded mounting (Teknik Makina)
The VT148TM screw-in milling head is a compact, industrial-grade cutter designed for indexable-insert milling with APKT/APXT 1003 inserts, suitable for demanding production and reconditioning tasks in metalworking environments.
- M16 threaded screw-in mounting
- Ø40 mm cutting diameter
- Compatible with APKT/APXT 1003 inserts
- Five cutting edges with 90° cutting angle
Stable clamping and consistent indexable-insert performance
The combination of an M16 thread with a defined threaded engagement height provides a rigid connection to the tool holder, which improves repeatability and reduces run-out during machining. With a Ø40 mm cutting diameter and a classic 90° cutting angle, the head is optimised for square-shoulder operations and predictable toolpaths. This mechanical stability translates into fewer re‑setups, more consistent part tolerances and a lower incidence of insert misalignment in serial production.
Built for reliability and vibration resistance
A measured 60 mm overall length with a 35.5 mm cutting height concentrates mass where it supports stability while keeping overhang low. The head weighs 0.266 kg, which helps to reduce tip deflection in short‑to‑medium reach operations. Secure fastening is achieved with a dedicated Torx M2.5x5.5 screw, tightened via a T8 key, ensuring the clamping force remains constant under intermittent loads. The result is reduced chatter, steadier cutting forces and extended insert life when process parameters are respected.
Fast insert changes and broad insert compatibility
Designed for use with APKT 1003 style indexable inserts and noted as suitable for APXT 1003 inserts, the VT148TM supports common insert geometries and sizes from established suppliers such as Korloy, enabling straightforward replacement and inventory alignment. The standardised screw and key combination simplifies maintenance routines so insert swaps are rapid and predictable, which reduces downtime on the shop floor and streamlines tooling logistics.
Application focus and expected benefits in production
The tool head is a practical choice for industrial milling applications where indexable inserts are preferred for economy and quick reconditioning. With five cutting edges and a secure screw-in mount, the head offers an efficient compromise between cutting capacity and compactness for dedicated machining centres and milling spindles supporting M16 screw-in tooling. Expect improved process stability, simplified tool management and reproducible results in repetitive milling tasks.
For tailored advice on integrating the VT148TM screw-in milling head into existing tool setups, contact Metav Werkzeuge for stock information and application support at info@metav-werkzeuge.com or +49 2822 7131930
Technical Data
-
SKU: VT148TM
-
Type: Screw-in milling head for indexable inserts
-
Designation: for APXT 1003 Indexable Inserts
-
eClass: 21180806
-
ETIM: EC011860
-
Diameter: 40 mm
-
Thread: M16
-
Threaded engagement height: 24.5 mm
-
Cutting height: 35.5 mm
-
Overall length: 60 mm
-
Cutting edges: 5
-
Cutting angle: 90°
-
Weight: 0.266 kg
-
Compatible inserts: APKT 1003; APXT 1003
-
Recommended insert maker: Korloy
-
Mounting screw: Torx M2.5x5.5
-
Required key: T8
-
SKU identifier: VT148TM
FAQ
Which inserts fit the VT148TM?
The VT148TM accepts APKT 1003 style indexable inserts and is described for APXT 1003 indexable inserts; compatible inserts from Korloy are suitable for standard applications.
What mounting thread is used on the tool head?
The cutter uses an M16 screw-in thread with a threaded engagement height of 24.5 mm for secure mounting.
How many cutting edges does the milling head offer?
The VT148TM features five cutting edges and a 90° cutting angle, designed to support repeatable shoulder milling tasks.
What fastener and tool are required to change inserts?
Insert clamping is done with a Torx M2.5x5.5 screw that is tightened or released with a T8 Torx key.
Is the overall length suitable for compact toolholders?
With a 60 mm overall length and a weight of 0.266 kg, the head is compact and suitable for many short-reach toolholder setups.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Cutting angle: | 90.0 |
|---|---|
| Designation: | Einschraubfräser |
| Diameter-1: | 40mm |
Passende Wendeplatten MetavCUT
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Design details APKT 100304 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT100304-Aluminium Facts and Figures: ISO-Code: APKT100304 Clearance Angle: 11° Angle: 85° Thickness: 3,18mm Radius: 0.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-100304-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts APKT 100304 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT100304-Stainless Facts for the tool: ISO-Code: APKT100304 Clearance Angle: 11° Angle: 85° Thickness: 3,18mm Radius: 0.4 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-100304-Stainless Steel-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications APKT 100304 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT100304-Steel Facts for the tool: ISO-Code: APKT100304 Clearance Angle: 11° Angle: 85° Thickness: 3,18mm Radius: 0.4 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-100304-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product specifications for APKT 100308 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT100308-Aluminium Facts for the tool: ISO-Code: APKT100308 Clearance Angle: 11° Angle: 85° Thickness: 3,18mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-100308-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts APKT 100308 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT100308-Stainless ISO-Code: APKT100308 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,18mm Radius: 0.8 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-100308-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts APKT 100308 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT100308-Steel ISO-Code: APKT100308 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,18mm Radius: 0.8 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-100308-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Design details APKT 1003PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1003PD-Aluminium ISO-Code: APKT1003PD Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,18mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1003PD-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for APKT 1003PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1003PD-CastIron ISO-Code: APKT1003PD Usage for: Cast steel Material: cemented carbide Form: parallelogram Usable to the work on: Cast Iron Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,18mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1003PD-Cast Iron-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product features APKT 1003PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1003PD-Stainless Dataand Figures: ISO-Code: APKT1003PD Clearance Angle: 11° Angle: 85° Thickness: 3,18mm Radius: 0 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1003PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 1003PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1003PD-Steel ISO-Code: APKT1003PD Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,18mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1003PD-Stahl-MetavCUT 40END