APKT 100304 Indexable Insert for Stahl - MetavCUT

High-efficiency milling with reliable insert compatibility: the combination of a 25 mm cutting diameter, 20 mm shank and compatibility with APKT 1003 indexable inserts delivers consistent surface finish and straightforward tool changes; order the milling cutter body directly via Metav Werkzeuge or consult the technical team for application advice. Schaftfräser S768TM – milling cutter body for APKT 1003 indexable inserts, Ø 25 mm, 20 mm shank (Teknik Makina) A Schaftfräser S768TM engineered as an indexable-insert milling cutter body for light-to-medium milling operations, offering stability and fast insert replacement for production and workshop settings Ø 25 mm cutting diameter 20 mm shank for secure clamping Holds APKT 1003 indexable inserts Four cutting edges for balanced cutting Precise compatibility that reduces setup time The S768TM is designed as an indexable-insert milling cutter body compatible with APKT 1003 inserts, enabling rapid tool resets and predictable results. Using standardised inserts from Palbit keeps tool inventory manageable and simplifies procurement. The holder accepts the common indexable geometry so that insert changes are completed with the supplied retention method, maintaining consistent cutting geometry and minimising cycle-to-cycle variation. This compatibility translates into fewer interruptions on the shop floor and more repeatable part quality. Stable clamping and predictable machining performance With a 20 mm shank and Ø 25 mm cutting diameter the tool body provides a rigid connection to the spindle for improved runout behaviour and dimensional consistency. The four cutting edges distribute cutting forces evenly, which reduces vibration and supports a steadier surface finish. For users unfamiliar with technical terms: reduced runout means the tool revolves with less wobble, which directly improves accuracy and prolongs insert life. These mechanical traits support efficient feeds and speeds in serial production where tool stability is decisive. Fast, serviceable insert changes to cut downtime Insert retention uses a Torx M2.5x5.5 screw secured with a T8 key, permitting quick replacements and low-maintenance operation. The retention design is serviceable with standard workshop tools, so routine maintenance does not require specialised fixtures. This design choice shortens non-productive time during insert swaps and reduces the risk of incorrect seating. Clear access to the screw head and a robust clamping interface ensure the insert is held securely under cutting loads while remaining straightforward to remove and index. Practical application guidance and sourcing The cutter body is suitable for general face and slot milling tasks where indexable inserts are preferred for economy and repeatability. Specifying the correct insert grade and geometry for the workpiece material remains essential; the S768TM affords the flexibility to use a range of APKT 1003 grades from recognised insert makers. For production planners and buyers, the combination of standard insert compatibility and a compact 25 mm diameter makes this body a practical choice where tool-change frequency and tooling standardisation are priorities. For technical clarification or machining recommendations, Metav Werkzeuge provides application support and stock information. For availability, application advice or to place an order for this Teknik Makina milling cutter body, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance Technical Data Article number: S768TM Manufacturer: Teknik Makina Product: milling cutter body for APKT 1003 indexable inserts Compatible inserts: Palbit APKT 1003 Dimensions & Key Figures Diameter: 25 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 4 Features & Mounting Torx screw: M2.5x5.5 Torx key size: T8 Suitable for APKT 1003 indexable inserts Compatible insert manufacturer: Palbit FAQ Which indexable inserts fit this cutter? The S768TM accepts APKT 1003 indexable inserts; compatibility with Palbit APKT 1003 grades is confirmed for standard operations. What are the key dimensions of the tool body? Shank diameter is 20 mm, cutting diameter 25 mm and overall length 150 mm, as specified for the S768TM. How many cutting edges does the cutter provide? The body is configured for four cutting edges, offering balanced load distribution and improved surface finish. How are inserts secured in the cutter body? Inserts are fastened with a Torx M2.5x5.5 screw that requires a T8 key for installation and removal. Is the cutter suitable for serial production? Yes; the combination of standard insert compatibility, secure shank clamping and quick insert changes makes the S768TM suitable for repetitive milling tasks in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust shank design, compatibility with APKT 1003 indexable inserts and secure Torx clamping for uninterrupted production. Order the indexable milling cutter directly via Metav Werkzeuge or consult the team for application-specific advice. Indexable milling cutter S767TM – 20 mm shank, 3 cutting edges by Teknik Makina Indexable milling cutter S767TM designed for efficient face and shoulder milling with APKT 1003 indexable inserts, suitable for general-purpose machining in workshop and light production environments. 20 mm shank diameter 90 mm overall length For APKT 1003 indexable inserts 3 cutting edges for stable cutting Torx screw M2.5×5.5, Torx key T8 Consistent performance through solid shank and secure clamping The combination of a 20 mm shank and a compact 90 mm overall length provides a stable toolholder interface and reduced overhang, which directly improves stiffness and repeatability in milling operations. With a rigid connection between tool and spindle, vibration is minimised and the achievable surface finish is improved. The supplied Torx screw M2.5×5.5 with T8 drive ensures positive clamping of the insert seat, lowering the risk of insert movement under load and extending productive tool life. Optimised cutting behaviour with three cutting edges Featuring three cutting edges, the cutter balances chip load and feed per tooth to deliver efficient material removal while keeping cutting forces moderate. The design is tailored for indexable inserts in the APKT 1003 format, enabling quick index changes and consistent geometry across edges. Using standardised inserts from Palbit simplifies supply logistics and reduces set-up time, making the tool a pragmatic choice for batch runs and mixed-material jobs where insert rotation and replacement are preferred over regrinding. Seamless integration into workshop workflows and maintenance The tool’s geometry and fastening system support fast insert replacement and straightforward maintenance, contributing to shorter tool-change times and higher machine uptime. Compatibility with widely available APKT 1003 inserts means stock management is simplified, while the defined Torx fastening keeps consumables consistent across the production line. For production planners and maintenance teams, this results in fewer interruptions and predictable tool performance, which supports stable cycle times and easier process standardisation. Contact Metav Werkzeuge for tailored technical advice on Teknik Makina indexable milling cutters and to request further specifications by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: S767TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core measurements Shank diameter: 20 mm Cutting diameter: 20 mm Overall length: 90 mm Number of cutting edges: 3 Torx screw: M2.5×5.5 Torx key: T8 Compatibility & features For APKT 1003 indexable inserts Compatible with Palbit inserts Indexable insert type: APKT 1003 Fastening: Torx screw M2.5×5.5 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; Palbit-manufactured APKT 1003 inserts are compatible with the S767TM from Teknik Makina. What are the key dimensions to check for toolholder compatibility? Check the shank diameter of 20 mm and the overall length of 90 mm to ensure correct fitment in the intended toolholder and sufficient clearance for the application. How many cutting edges does the tool provide and what is the benefit? The S767TM has three cutting edges; this geometry balances material removal rate and cutting forces to deliver stable machining and improved surface quality. What fastening hardware is supplied and which key is required? Fastening uses a Torx screw M2.5×5.5 and requires a T8 Torx key for secure insert clamping and straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a modular, reliable solution for indexable insert milling: the solid shank design with a 16 mm shank and two cutting edges delivers consistent engagement and straightforward insert changes, while compatibility with APKT 1003 inserts keeps tooling cost and downtime low — order via Metav Werkzeuge or consult the specialists for application advice. Schaftfräser S766TM – Indexable insert milling cutter, Ø 16 mm shank, Teknik Makina The Schaftfräser S766TM is a solid-shank milling cutter developed for indexable APKT 1003 inserts, intended for industrial milling stations and workshop tooling where rapid insert changes and consistent repeatability are required Compatible with APKT 1003 indexable inserts Ø 16 mm solid shank Overall length 85 mm Torx M2.5x5.5 fastener, key T8 Consistent production through indexable-insert modularity The combination of APKT 1003 compatibility and replaceable cutting tips provides a cost-effective route to sustained productivity. When a cutting edge wears, only the insert needs replacing rather than the entire cutter body, which reduces overall tooling expenditure and simplifies inventory management. This modular approach also shortens machine downtime for changeovers, supporting higher overall equipment effectiveness in batch and serial production. Secure clamping and dimensional reliability for repeatable results A solid Ø 16 mm shank and an 85 mm overall length provide a compact, rigid interface that aids concentricity and stability during milling. The head accepts two cutting edges, which balance chip load and help maintain cutting forces within predictable limits. Fastening is via Torx M2.5x5.5 screw secured with a T8 key, ensuring repeatable clamp torque and low risk of insert movement — key factors for maintaining surface quality and dimensional tolerance across series parts. Practical deployment with industry-standard inserts Designed specifically for the APKT 1003 family of indexable inserts (insert manufacturer: Palbit), this cutter integrates into common tooling systems without the need for special adapters. The tool body supports the established insert geometry, allowing familiar cutting parameters and toolpaths to be applied. For operations already standardised on APKT 1003 tips, the S766TM offers a direct upgrade path that preserves programming and process knowledge while refreshing the cutter hardware. Supply reliability and technical backing from a trusted partner Sourcing this cutter through Metav Werkzeuge brings the advantages of a broad industrial offering and a dependable logistics base in Emmerich. Metav’s proposition to democratise precision is backed by a wide product range and many satisfied customers, which supports fast replenishment and consistent quality control. For procurement teams and workshop planners, that translates into predictable supply and straightforward integration into existing tool sets. Choose the Teknik Makina S766TM for reliable indexable-insert milling; contact Metav Werkzeuge in Emmerich for technical guidance and supply details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S766TM Manufacturer: Teknik Makina Product: Shaft cutter for APKT 1003 indexable inserts Compatible inserts: APKT 1003 (Palbit) ECLASS: 21180806 ETIM: EC011860 Core measurements Diameter: 16 mm Shank diameter: 16 mm Overall length: 85 mm Number of cutting edges: 2 Features & compatibility Fastening: Torx M2.5x5.5 Torx key size: T8 Suitable for indexable insert milling systems Insert manufacturer reference: Palbit FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts as specified; Teknik Makina designed the S766TM to work with APKT 1003 geometry and Palbit-manufactured tips. What is the shank diameter and overall length? The S766TM has a Ø 16 mm shank and an overall length of 85 mm, dimensions that suit many common milling setups and collet systems. How are the inserts secured to the cutter? Inserts are clamped with a Torx M2.5x5.5 screw; assembly and removal are performed using a T8 Torx key to ensure consistent clamp torque for the S766TM. Is this cutter suitable for automatic insert changes in production? The S766TM is designed for indexable-insert workflows where inserts such as APKT 1003 are replaced as part of normal maintenance; Teknik Makina engineered the tool for repeatable insert seating and straightforward servicing. Where can technical data and purchasing support be obtained? For detailed technical specifications and procurement, Metav Werkzeuge can supply application guidance and availability information for the Teknik Makina S766TM (SKU S766TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure mounting, straightforward insert replacement and stable geometry for consistent milling performance; order the VT150TM screw-in cutter directly via Metav Werkzeuge or ask our consultants if needed VT150TM screw-in cutter by Teknik Makina – Ø42 mm, M16 thread A VT150TM screw-in cutter designed for use with APKT 1003 indexable inserts, offering compact dimensions and a robust M16 mounting for reliable CNC milling setups Ø42 mm diameter for compact milling heads M16 screw-in mounting for stable clamping Compatible with APKT 1003 indexable inserts Fast insert changes that save setup time The screw-in cutter is engineered for rapid indexable-insert replacement, significantly reducing downtime in production. The insert fastening is secured with a Torx M2.5x5.5 screw actuated by a T8 key, ensuring repeatable clamping torque and minimised play. This arrangement means inserts are retained securely while still being straightforward to exchange; unskilled operators can be instructed quickly and maintenance remains efficient. The compact head and standardised fixing reduce tool change complexity and support lean workflow practices on the shop floor. Stable mounting and precise cutting geometry A solid M16 thread and a screw-in depth of 24.5 mm provide a rigid connection to the toolholder, which reduces vibration and enhances surface finish consistency. The cutter’s Ø42 mm diameter and overall length of 60 mm combine with a cutting height of 35.5 mm to offer a balance between reach and stiffness. With 5 cutting edges and a 90° cutting angle, the toolhead maintains cutting stability across a variety of operations. The low mass of 0.294 kg contributes to dynamic stability at typical spindle speeds while keeping inertial loads manageable for tool changers and automatic systems. Designed for proven insert systems and straightforward logistics Compatibility with APKT 1003 indexable inserts from Korloy allows the integration of widely available grades and geometries, giving process planners flexibility when specifying grades for different tasks. The cutter’s configuration supports efficient inventory management by aligning with common insert ranges. The compact design and familiar thread standards mean replacement and stocking are uncomplicated; the machining cell benefits from predictable tool behaviour and simplified procurement. Practical benefits for production and workshop use Specifying the VT150TM as part of a tooling package brings operational advantages: the standardised mount and screw fixings reduce set-up variance, the multi-edge head extends effective cutting life before an index is required, and the lightweight construction aids faster acceleration during cyclic machining. The tool is suitable where quick insert swaps and a compact, rigid head are priorities. Detailed dimensions and fastening data are provided below to assist integration into existing toolholding schemes and CAM tool libraries. Contact Metav Werkzeuge for tailored advice and procurement from the Emmerich hub; discussion on tool compatibility and delivery can be arranged via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VT150TM Manufacturer: Teknik Makina Product type: Screw-in cutter Diameter: 42 mm Thread: M16 Total length: 60 mm Screw-in depth: 24.5 mm Cutting height: 35.5 mm Number of cutting edges: 5 Cutting angle: 90° Weight: 0.294 kg Torx screw: M2,5x5,5 Torx key size: T8 Compatible inserts: APKT 1003 Insert compatibility note: referenced as APXT 1003 in some documentation Suitable insert manufacturer: Korloy SKU: VT150TM FAQ Which inserts fit this cutter? The VT150TM is specified for APKT 1003 indexable inserts; the tool is set up to accept common grades supplied by Korloy for that insert family. What fastening hardware is required to change an insert? Insert retention uses a Torx screw sized M2.5x5.5; a T8 Torx key is required for tightening and loosening. What are the key mounting dimensions for integration? The cutter mounts via an M16 screw-in thread with a screw-in depth of 24.5 mm and an overall length of 60 mm. How many cutting edges are available per head? The milling head provides 5 cutting edges, supporting index changes without full-tool replacement. What is the cutter’s diameter and cutting height? The head diameter is 42 mm with a cutting height of 35.5 mm, delivering a compact but rigid geometry for many milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust compatibility with APKT/APXT 1003 indexable inserts and the secure M16 screw-in mounting to reduce setup time and increase process stability; order the VT148TM via Metav Werkzeuge or consult our specialists for application advice. VT148TM screw-in milling head — Ø40 mm, M16 threaded mounting (Teknik Makina) The VT148TM screw-in milling head is a compact, industrial-grade cutter designed for indexable-insert milling with APKT/APXT 1003 inserts, suitable for demanding production and reconditioning tasks in metalworking environments. M16 threaded screw-in mounting Ø40 mm cutting diameter Compatible with APKT/APXT 1003 inserts Five cutting edges with 90° cutting angle Stable clamping and consistent indexable-insert performance The combination of an M16 thread with a defined threaded engagement height provides a rigid connection to the tool holder, which improves repeatability and reduces run-out during machining. With a Ø40 mm cutting diameter and a classic 90° cutting angle, the head is optimised for square-shoulder operations and predictable toolpaths. This mechanical stability translates into fewer re‑setups, more consistent part tolerances and a lower incidence of insert misalignment in serial production. Built for reliability and vibration resistance A measured 60 mm overall length with a 35.5 mm cutting height concentrates mass where it supports stability while keeping overhang low. The head weighs 0.266 kg, which helps to reduce tip deflection in short‑to‑medium reach operations. Secure fastening is achieved with a dedicated Torx M2.5x5.5 screw, tightened via a T8 key, ensuring the clamping force remains constant under intermittent loads. The result is reduced chatter, steadier cutting forces and extended insert life when process parameters are respected. Fast insert changes and broad insert compatibility Designed for use with APKT 1003 style indexable inserts and noted as suitable for APXT 1003 inserts, the VT148TM supports common insert geometries and sizes from established suppliers such as Korloy, enabling straightforward replacement and inventory alignment. The standardised screw and key combination simplifies maintenance routines so insert swaps are rapid and predictable, which reduces downtime on the shop floor and streamlines tooling logistics. Application focus and expected benefits in production The tool head is a practical choice for industrial milling applications where indexable inserts are preferred for economy and quick reconditioning. With five cutting edges and a secure screw-in mount, the head offers an efficient compromise between cutting capacity and compactness for dedicated machining centres and milling spindles supporting M16 screw-in tooling. Expect improved process stability, simplified tool management and reproducible results in repetitive milling tasks. For tailored advice on integrating the VT148TM screw-in milling head into existing tool setups, contact Metav Werkzeuge for stock information and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: VT148TM Type: Screw-in milling head for indexable inserts Designation: for APXT 1003 Indexable Inserts eClass: 21180806 ETIM: EC011860 Diameter: 40 mm Thread: M16 Threaded engagement height: 24.5 mm Cutting height: 35.5 mm Overall length: 60 mm Cutting edges: 5 Cutting angle: 90° Weight: 0.266 kg Compatible inserts: APKT 1003; APXT 1003 Recommended insert maker: Korloy Mounting screw: Torx M2.5x5.5 Required key: T8 SKU identifier: VT148TM FAQ Which inserts fit the VT148TM? The VT148TM accepts APKT 1003 style indexable inserts and is described for APXT 1003 indexable inserts; compatible inserts from Korloy are suitable for standard applications. What mounting thread is used on the tool head? The cutter uses an M16 screw-in thread with a threaded engagement height of 24.5 mm for secure mounting. How many cutting edges does the milling head offer? The VT148TM features five cutting edges and a 90° cutting angle, designed to support repeatable shoulder milling tasks. What fastener and tool are required to change inserts? Insert clamping is done with a Torx M2.5x5.5 screw that is tightened or released with a T8 Torx key. Is the overall length suitable for compact toolholders? With a 60 mm overall length and a weight of 0.266 kg, the head is compact and suitable for many short-reach toolholder setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of secure screw-in mounting, Ø 35 mm cutting diameter and fast insert changes for reliable, high‑productivity milling; order through Metav Werkzeuge or ask the consultants for application advice. Screw-in milling cutter for APXT 1003 indexable inserts — Teknik Makina, Ø 35 mm, M16 thread A screw-in milling cutter designed for stable face and shoulder milling with APKT/APXT 1003 indexable inserts in general workshop and light production environments. Screw-in design with M16 thread Ø 35 mm cutter diameter 4 cutting edges for stable machining Compatible with APKT 1003 inserts Stable mounting for consistent machining results The screw-in design with an M16 thread provides a secure interface that reduces runout and vibration, which translates into improved surface finish and predictable tool life. With a Ø 35 mm diameter and a compact 60 mm overall length the tool offers a rigid cutting geometry that supports higher feed rates without sacrificing repetition accuracy. This robustness is especially beneficial where short setup times and low scrap rates are required, making the holder a practical choice for repetitive shoulder and face milling operations. Fast insert changes and reliable clamping cut downtime Designed for APKT 1003 (APXT 1003) indexable inserts, the tool accepts common triangular inserts from major suppliers such as Korloy, ensuring broad availability and choice. The cutting inserts are secured by a Torx screw M2.5x5.5 driven with a T8 key, enabling quick, repeatable replacement with minimal recalibration. Fewer and faster insert changes reduce non‑productive time and support continuous shopfloor throughput, while the standardised interface helps keep inventory and tooling planning straightforward. Compact dimensions that suit varied set-ups With a cutting height of 35.5 mm and a thread height of 24.5 mm, the cutter balances reach and stiffness for many common milling fixtures. The tool’s 90° cutting angle is optimised for square shoulders and precise face milling, while a mass of 0.225 kg keeps handling simple during tool changes and inventory handling. These measured dimensions make the component well suited for modular toolholders and compact milling heads where space is limited yet stability remains essential. Request a technical consultation from Metav Werkzeuge to confirm fitment and production suitability — Metav Werkzeuge can advise on inserts, clamping torque and optimal feeds for the Teknik Makina screw‑in milling cutter (VT146TM) Technical data Article number: VT146TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter for indexable inserts Compatible inserts: APKT 1003 / APXT 1003 Core technical data Diameter: 35 mm Thread: M16 Number of cutting edges: 4 Overall length: 60 mm Cutting height: 35.5 mm Thread height: 24.5 mm Cutting angle: 90° Weight: 0.225 kg Torx screw: M2.5x5.5 Torx key: T8 SKU: VT146TM ECLASS: 21180806 ETIM: EC011860 Special features Screw-in mounting for low runout Compatible with Korloy and equivalent inserts Compact, rigid design for face and shoulder milling Quick‑change Torx clamping system Suitable for APKT/APXT 1003 indexable inserts FAQ What inserts fit this screw-in milling cutter? The screw‑in milling cutter accepts APKT 1003 / APXT 1003 indexable inserts; common manufacturers such as Korloy supply compatible grades for varied materials. Is the cutter suitable for shoulder milling on steel? Yes, the VT146TM cutter’s Ø 35 mm diameter and 90° cutting angle deliver the rigidity and geometry required for precise shoulder milling in typical steel applications. How is the insert secured and what tool is needed? Inserts are secured with a Torx screw M2.5x5.5; a T8 Torx key is used for tightening to achieve repeatable clamping. Can the cutter be used in compact toolholders? The 60 mm overall length and M16 screw‑in interface make the cutter compatible with many compact toolholder systems while maintaining stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: VT143TM Item: Modular End Mill usable with APKT 1003 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 32mm Cutting Edges: 4 Weight: 0.195kg Total length: 60mm Cutting Height: 35.5mm Thread: M16 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a compact, screw-in design combined with proven compatibility for APXT 1003 indexable inserts to reduce tool change time and maintain consistent machining results; available directly via Metav Werkzeuge or through specialist advice from our team. Screw-in Cutter VT140TM — 25 mm diameter, M12 thread by Teknik Makina The Screw-in Cutter VT140TM is a compact milling head designed for indexable-insert turning and milling applications, offering secure clamping and straightforward insert replacement for production and maintenance environments 25 mm cutter diameter M12 screw-in thread Fits APXT 1003 indexable inserts Three cutting edges for steady cutting Faster insert changes through secure Torx clamping The robust Torx screw (M2.5x5.5) and corresponding T8 key deliver a positive clamping interface that simplifies insert replacement and reduces downtime. This secure fastening system keeps the insert pocket consistently aligned, so cycle times remain stable and rework is minimised. For workshops moving from brazed or solid tools to indexable systems, the reduced handling and simplified spare-part management translate into measurable time savings per tool change, while compatibility with Korloy-produced inserts broadens sourcing options. Consistent cutting performance with compact geometry With a 25 mm diameter, three cutting edges and a 90° cutting angle, the tool provides a balanced mix of rigidity and accessibility for standard face and shoulder operations. The cutter’s cutting height (33 mm) and overall length (55 mm) are optimised to keep overhang low and vibration under control, improving surface finish and tool life. Operators unfamiliar with indexable tooling will find the geometry predictable: one can expect steady chip evacuation and reliable contact conditions, which reduces the need for frequent process adjustments. Practical workshop integration and predictable handling The screw-in interface with an M12 thread and a 22 mm thread engagement offers simple mounting into compatible holders and systems, keeping inventory lean. At 0.135 kg, the head is light enough for rapid handling yet substantial enough to contribute to cutting stability. Designed for APXT 1003 indexable inserts, this head supports a cost-efficient approach to tooling by allowing selective use of inserts for wear-prone operations while the body remains reusable. Technical buyers and production planners benefit from this separation: replacement cost is limited to the insert, not the entire tool body. For a tailored quotation or to discuss workshop integration with the VT140TM, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and delivery options. Technical Data SKU: VT140TM Brand: Teknik Makina Product: Screw-in cutter for indexable inserts Compatibility: for APXT 1003 indexable inserts ECLASS: 21180806 ETIM: EC011860 Diameter: 25 mm Overall length: 55 mm Cutting height: 33 mm Thread: M12 Thread engagement height: 22 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.135 kg Torx screw: M2.5x5.5 Torx key: T8 Compatible insert manufacturer: Korloy Design: screw-in milling head Application: indexable-insert milling FAQ What inserts are compatible with this cutter? The cutter accepts APXT 1003 indexable inserts; Korloy inserts listed as compatible are suitable for the VT140TM head. Which toolholder interface is required for mounting? A holder with an M12 screw-in thread and sufficient clearance for the head’s 55 mm overall length is required to mount the VT140TM securely. What size and type of screw secures the insert? Insert clamping is performed with a Torx screw M2.5x5.5; the recommended driver size is a T8 bit for consistent torque. Is the cutter suitable for heavy shoulder milling? The compact geometry, three cutting edges and 90° cutting angle provide stable contact suitable for routine shoulder and face milling; suitability for heavy roughing depends on specific machine and process parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Information: Order Number: VT138TM Item: Modular End Mill usable with APKT 1003 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Numbers and Data: Diameter: 20mm Cutting Edges: 3 Weight: 0.097kg Total length: 55mm Cutting Height: 35mm Thread: M10 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, precise 90° cutting geometry and straightforward insert compatibility for consistent face-milling results; order directly via Metav Werkzeuge or consult their advisors for matching inserts and setup assistance. Screw-in Milling Cutter VT136TM — 90° shank cutter for APKT 1003 indexable inserts by Teknik Makina The Screw-in Milling Cutter VT136TM is a compact, 90° screw-in cutter intended for precision face milling and short overhang operations with Korloy APKT 1003 indexable inserts. 90° cutting angle for reliable face milling Compatible with Korloy APKT 1003 inserts M8 screw-in shank, Ø 16 mm Torx fastener M2.5x5.5, keyed with T8 High-precision mounting and stable tool geometry for repeatable results The VT136TM is engineered as a screw-in milling cutter with a screw-in shank (M8) and a compact diameter of Ø 16 mm, enabling a low overhang and predictable tool behaviour. Compatibility with Korloy APKT 1003 indexable inserts ensures that proven insert geometries are available for a wide range of face-milling tasks. The design reduces setup variability: the central threaded connection and clear reference surfaces permit consistent orientation, while the cutter’s defined 90° cutting angle produces square shoulders and accurate board finishes. This combination supports process stability in repeated cycles and simplifies tool selection in mixed-production environments. Rapid insert changes and secure clamping to reduce downtime The tool uses a single Torx fastener (size M2.5x5.5) tightened with a T8 key for insert clamping, which provides a straightforward and secure retention method. With 2 cutting edges and an overall length of 41 mm, the cutter is optimised for short, controlled engagements where fast indexable-insert replacement keeps cycle times low. The compact dimensions and low mass (approx. 0.05 kg) contribute to lower centrifugal loads and make it well suited to machines with limited tool magazine capacity. Where quick changeovers are required, the simple Torx fixation minimises handling time and the risk of incorrect seating. Practical applications and workshop benefits for everyday production This screw-in tool is intended for workshops and production lines that require accurate face milling with standard APKT 1003 inserts and a robust 90° geometry. The compact form factor supports tight set-ups and confined work envelopes, while the proven insert family from Korloy provides options for finishing and general-purpose cutting. For users seeking predictable results and reduced set-up complexity, the unitary screw-in mounting and standardised insert interface make tool management more efficient and less error-prone. If further clarification on fitting or suitable insert grades is needed, Metav’s technical advisors can be consulted for application-specific guidance. For delivery, technical matching and procurement of the Teknik Makina VT136TM screw-in milling cutter contact Metav Werkzeuge for supply and expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT136TM Manufacturer: Teknik Makina Facts Diameter: 16 mm Thread: M8 Thread height: 16 mm Cutting-edge height: 25 mm Cutting angle: 90° Number of cutting edges: 2 Overall length: 41 mm Weight: 0.05 kg Torx fastener: M2.5x5.5 Torx key: T8 Compatible inserts manufacturer: Korloy Special features Screw-in mounting Compatible with APKT 1003 indexable inserts Compact design for reduced overhang Torx-secured insert clamping FAQ Which inserts are compatible with this cutter? The cutter is compatible with Korloy APKT 1003 indexable inserts; the APKT family provides a range of grades for finishing and general-purpose milling. What is the required fastening tool for insert changes? Insert clamping is secured with a Torx fastener M2.5x5.5 and requires a T8 key for correct torque application. How does the cutter’s geometry affect machining? The 90° cutting angle creates square shoulders and precise face finishes; the compact Ø 16 mm body reduces overhang for improved rigidity during short engagements. Is the cutter suitable for automated tool magazines? With an overall length of 41 mm and a mass of approximately 0.05 kg, the design is compatible with many automatic tool-change systems and smaller tool magazines. What machine applications are recommended for this type of cutter? The tool is intended for face milling and short-reach operations in small to medium series production where standard APKT 1003 inserts deliver the required surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid cutter body with a Ø32 mm shank and a 45 mm effective cutting length for stable, reproducible milling results; order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Indexable milling cutter S038TM — for APKT 1003–1604 indexable inserts, Ø32 mm, 4 cutting edges (Teknik Makina) The Indexable milling cutter S038TM is a shank-mounted cutter body designed for finish and semi-finish face and shoulder milling with APKT 1003–1604 indexable inserts, offering a compact 150 mm overall length for standard workshop tool posts Ø 32 mm shank diameter 45 mm effective cutting length Holds APKT 1003 inserts (YG‑1 compatible) Torx M2.5x7 fastening, T8 key required Greater rigidity for consistent machining results A larger shank diameter is the simplest way to increase tool stability in milling operations: the Ø32 mm shank of this milling cutter reduces deflection under load and improves surface finish consistency when compared with smaller holders. The 150 mm overall length keeps the tool projection moderate, which further reduces vibration and enables higher feed rates with predictable tool life. For production environments where process repeatability matters, the combination of shank size and compact geometry translates into fewer reworks and more predictable cycle times. Secure insert clamping and simple serviceability The cutter body is supplied to accept APKT 1003 indexable inserts and is compatible with YG‑1 insert geometries, simplifying procurement and inventory. Insert retention uses a Torx M2.5x7 screw tightened with a T8 key, ensuring repeatable clamping torque and straightforward insert changes at the machine. Indexable inserts let workshops separate cutting-edge wear from the expensive cutter body: worn edges are replaced in seconds, keeping downtime to a minimum and cost per cutting edge low. The 90° cutting angle offers reliable shoulder clearance and predictable chip flow for general-purpose milling. Optimised geometry for efficient machining Equipped with 4 cutting edges, the cutter body balances material removal with smooth engagement, spreading cutting forces across multiple edges for reduced load per insert. The 45 mm cutting length provides ample axial engagement for many face and shoulder operations without overextending the insert life. These characteristics support efficient material removal while maintaining control over heat and chip evacuation—advantages that improve throughput and lower the total cost of machining per component. Practical workshop details and integration With a mass of approximately 0.946 kg, the tool body is easy to handle during tool changes and inspection routines. The design suits general workshop tool posts and common milling spindle configurations; the compact overall length aids storage and tool magazine organisation. For traceability and ordering within a controlled procurement process, use SKU S038TM when requesting the cutter body or spare fastening screws from Metav Werkzeuge. As a reliable partner, Metav supports selection and logistics so that precision tools arrive quickly and without administrative friction. For tailored advice on application, compatibility or to secure the Teknik Makina S038TM from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request a quotation or technical guidance Technical Data Article number: S038TM Manufacturer: Teknik Makina SKU: S038TM Compatible inserts: APKT 1003 Compatible insert maker: YG-1 Fastening screw: M2,5x7 (Torx T8) Numbers / Core technical data Shank diameter: 32 mm Effective cutting length: 45 mm Overall length: 150 mm Weight: 0.946 kg Number of cutting edges: 4 Cutting angle: 90° Special features / Versions For APKT 1003–1604 indexable inserts Torx screw clamping system M2,5x7 Compatible with YG‑1 insert geometries Compact 150 mm overall length FAQ Which insert grade and size fits this cutter? The cutter accepts APKT 1003 indexable inserts; matching grades from YG‑1 are compatible and commonly used with this cutter body. What toolholder shank does the body require? The body presents a Ø32 mm shank interface; compatibility with a specific spindle or adaptor depends on the machine’s toolholder system. How is the insert secured and what key is needed? Inserts are fastened with an M2.5x7 Torx screw; a T8 key is required to achieve the correct clamping. Is the cutter suitable for shoulder milling with light overhangs? Yes. The 90° cutting angle, 45 mm cutting length and Ø32 mm shank offer good rigidity for face and shoulder milling with moderate overhang. What identifier should be quoted when ordering spare parts or replacements? Use SKU S038TM and reference the Teknik Makina cutter body when ordering replacement screws, inserts or spare bodies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust balance of stability and serviceability: a 25 mm shank with a 60 mm cutting length ensures secure clamping and effective material removal, while compatibility with APKT 1003–1604 indexable inserts keeps tooling costs predictable; order this tooling through Metav Werkzeuge or consult their specialists for integration into existing tool holders. Shank cutter S037TM – 25 mm shank, 3 cutting edges | Teknik Makina The Shank cutter S037TM is a precision indexable insert milling tool designed for face and shoulder milling where replaceable APKT 1003–1604 inserts are preferred for efficient chip control and simplified regrinding. 25 mm shank diameter for stable clamping 60 mm cutting length for deep passes Compatible with APKT 1003–1604 inserts Three cutting edges for smooth material removal Stable cutting performance for repeatable results The S037TM is engineered to deliver consistent machining through a combination of a 25 mm shank and a 90° cutting angle, which together reduce deflection during heavy cuts. The tool’s three cutting edges distribute cutting forces evenly, producing a more uniform surface finish and lowering the risk of chatter. For production environments, this translates into fewer rejects and a more predictable process window, as the cutter remains rigid across successive operations without frequent realignment. Quick insert changeover and secure retention Maintenance and set-up time are minimised thanks to a straightforward insert clamping system: the insert is fixed with an M2.5x5.5 Torx screw, tightened using a T8 key. The holder accepts standard APKT 1003–1604 indexable inserts, including sizes supplied by YG-1, so replacement parts are widely available. Indexable inserts mean only the cutting edge is replaced when worn, not the whole tool body, improving overall cost efficiency and shortening downtime for tool changes. Versatile dimensions for workshop integration With a 60 mm cutting length and an overall length of 150 mm, the tool offers reach suitable for many shoulder and face milling tasks while keeping the overhang moderate to preserve rigidity. The nominal 25 mm diameter aligns with common tool-holding systems, allowing straightforward integration into existing setups. The cutter’s net weight of 0.541 kg simplifies handling during changeover and storage, while the compatibility with APKT-style inserts keeps inventory manageable for medium-volume production. For reliable high-performance milling with the Teknik Makina shank cutter, contact Metav Werkzeuge in Emmerich for precise tool matching and ordering: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: S037TM ECLASS: 21180806 ETIM: EC011860 Manufacturer: Teknik Makina Numbers / Core technical data Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 25 mm Number of cutting edges: 3 Weight: 0.541 kg Cutting angle: 90° Special features / Versions For APKT 1003–1604 indexable inserts Compatible insert manufacturer: YG-1 Torx screw: M2.5x5.5 Torx key size: T8 SKU: S037TM Designation: Shank cutter for APKT 1003–1604 indexable inserts FAQ Which indexable inserts fit this cutter? The cutter accepts APKT 1003–1604 indexable inserts; compatible inserts from YG-1 are suitable for the S037TM. What is the shank diameter and why does it matter? The shank diameter is 25 mm, providing a stable interface with the tool holder that helps reduce deflection and improve surface finish. How are the inserts secured in the holder? Inserts are clamped with an M2.5x5.5 Torx screw, tightened using a T8 key for reliable retention during machining. What are the cutting and overall lengths? The tool offers a 60 mm cutting length and an overall length of 150 mm, balancing reach with rigidity for typical face and shoulder milling. How many cutting edges does the tool have? The S037TM features three cutting edges, designed to provide smooth material removal and even load distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise indexable-insert compatibility, a compact 20 mm shank and a 60 mm cutting length for consistent milling performance — order directly via Metav Werkzeuge or consult the Metav team for application advice. Shank milling cutter S036TM by Teknik Makina — 20 mm diameter, for APKT 1003–1604 indexable inserts The Shank milling cutter S036TM is a compact indexable-insert milling tool engineered for reliable shoulder and face milling with APKT 1003–1604 inserts 20 mm diameter shank 60 mm cutting length 3 cutting edges for stable milling Compatible with APKT 1003–1604 inserts Productivity through proven insert compatibility The S036TM is built around the proven economy of indexable inserts. Accepting APKT 1003–1604 types and matching common suppliers such as YG‑1, the tool reduces downtime associated with regrinding: worn cutting edges are replaced in seconds rather than hours. This approach yields a clear operational advantage — consistent geometry across changes preserves cycle times and contributes to a predictable production process. For procurement and production planners, the combination of insert interchangeability and a compact tool body contributes to lower lifecycle costs and simplified tooling logistics. Stable cutting performance and predictable results With a 20 mm shank diameter and a 60 mm cutting length, the tool provides a balance between rigidity and reach. The 3 cutting edges and a 90° cutting angle are optimised for shoulder milling and facing tasks where square corners and flat surfaces are required. Engineers benefit from reduced vibration and improved surface finish because the cutter geometry maintains cutting forces within predictable ranges. For teams unfamiliar with insert terminology: indexable inserts are replaceable carbide tips mounted to the cutter body, combining the affordability of consumable tips with the accuracy of a solid tool system. Secure clamping and simple maintenance The insert clamping is executed with a Torx screw (M2.5×5.5) tightened with a T8 key, ensuring a repeatable and robust seat for each insert change. This standardised fastening minimises the risk of incorrect torque and supports safe operation under typical milling loads. Maintenance routines are therefore straightforward: inspect, loosen the Torx screw, replace the insert and retorque to specification. The light overall mass and compact footprint make handling simple on the shop floor while supporting frequent insert changes without special equipment. Application fit and workshop efficiency Designed as an insert milling solution, the cutter suits workshops seeking flexibility between roughing and finishing by varying insert grades and geometries. The tool’s compatibility with a common insert family allows rapid adaptation to different materials and cutting strategies without replacing the entire cutter body. For production managers, the core benefit is clear: fewer toolholders to stock, faster tool changes, and the ability to scale cutter performance through insert selection. The S036TM therefore functions as a practical building block in modular tooling systems. Contact Metav Werkzeuge today for tailored application advice and to secure the Teknik Cutting Tools shank milling cutter S036TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific operations Technical data SKU: S036TM Type: Shank milling cutter for APKT 1003–1604 indexable inserts Brand: Teknik Makina Core measurements Diameter: 20 mm Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.368 kg Compatibility & special features Compatible inserts: APKT 1003–1604 Suitable insert manufacturer: YG‑1 Torx screw: M2.5×5.5 Torx key: T8 FAQ Which insert types fit this cutter? The shank milling cutter S036TM is designed for APKT 1003–1604 indexable inserts and is compatible with inserts from manufacturers such as YG‑1 What are the main dimensions to check for machine setup? Key dimensions are 20 mm diameter, 60 mm cutting length and 150 mm overall length; these determine tool clearance and holder compatibility How is the insert secured and which key is required? Inserts are secured with a Torx screw (M2.5×5.5) using a T8 key for reliable clamping on the S036TM How many cutting edges are available and what do they offer? The cutter provides 3 cutting edges, offering a balance of cutting stability and efficient chip evacuation for shoulder and face milling Is the S036TM suitable for rapid insert changes on the shop floor? Yes — the design and standard Torx fastening enable quick, repeatable insert changes to support efficient shop‑floor workflows Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise compatibility with APKT 1003–1604 indexable inserts, a robust 16 mm shank and a 50 mm effective cutting length for dependable, high‑productivity milling; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S035TM – 16 mm shank, for APKT 1003–1604 indexable inserts (Teknik Makina) The Shank milling cutter S035TM is engineered for efficient face and shoulder milling with APKT 1003–1604 indexable inserts, suitable for CNC and automated toolholders across light to medium machining tasks 16 mm shank diameter Compatible with APKT 1003–1604 inserts 50 mm cutting length Torx screw M2.5x5.5, T8 key Higher throughput through proven indexable insert compatibility The cutter delivers measurable productivity gains by using industry-standard APKT 1003–1604 indexable inserts, enabling rapid insert changes and consistent cutting performance. With a 16 mm shank and a 50 mm cutting length, the tool offers a balance between rigidity and reachable engagement depth; this reduces vibration and supports stable cutting forces. The two-flute geometry provides a controlled chip evacuation rate, which helps maintain cycle times while protecting workpiece integrity during face and shoulder operations. Simple handling and secure clamping reduce downtime Tool changeover and repeatable clamping are simplified by the standardised fixing: a Torx M2.5x5.5 screw tightened with a T8 key ensures repeatable torque and a secure seat for the indexable insert. The robust overall length of 150 mm gives sufficient reach for many setups without compromising rigidity. Together, these attributes reduce adjustment time at the machine and lower the risk of incorrect seating, supporting continuous production and fewer stoppages. Practical benefits for the workshop workflow Specifically designed for compatibility with YG‑1 insert systems, the cutter supports flexible inventory management and easy sourcing of replacement inserts. Its 90° cutting angle makes it well suited to shoulders and square faces, delivering clean finishes with minimal secondary machining. The tool’s modest mass (0.32 kg) contributes to straightforward handling and less wear on toolholders during frequent changes. For operations where consistent insert indexing and predictable results matter, this shank cutter is an efficient, cost‑conscious choice. Contact Metav Werkzeuge for tailored specification checks and ordering advice on the Teknik Makina Shank milling cutter S035TM to ensure exact compatibility with existing APKT 1003 insert stocks Technical data Article number: S035TM Manufacturer: Teknik Makina SKU: S035TM Designation: Shank milling cutter for APKT 1003–1604 indexable inserts Facts Shank diameter: 16 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.32 kg Special features Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Torx screw: M2.5x5.5 Torx key size: T8 FAQ What inserts fit this cutter? The cutter accepts APKT 1003–1604 indexable inserts; compatibility with YG‑1 variants is indicated in the technical data for the S035TM. Is the shank size suitable for standard toolholders? Yes, the 16 mm shank conforms to common toolholder specifications used in many CNC milling setups, providing good balance between rigidity and reach. What applications is the cutter best for? The tool is optimised for face and shoulder milling with a 90° cutting angle, offering clean finishes and efficient material removal in light to medium machining tasks. How is the insert secured? Insert clamping uses a Torx M2.5x5.5 screw, tightened with a T8 key, which ensures repeatable torque and reliable seat retention. Can this cutter reduce changeover time? Yes; the indexable insert system and standardised fixing method are designed to speed insert replacement and reduce machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust geometry, straightforward insert compatibility and secure clamping for dependable milling results; order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank Milling Cutter S034TM – 32 mm Ø, 4 flutes (for APKT 1003–1604 Indexable Inserts) — Teknik Makina The Shank Milling Cutter S034TM is a tool body designed to accept APKT 1003–1604 indexable inserts for versatile face and slot milling in industrial production environments. Ø32 mm cutting diameter 4 cutting edges for stable machining 25 mm shank diameter, 35 mm cutting length Compatible with APKT 1003 indexable inserts Reliable cutting geometry for steady material removal The S034TM milling body delivers consistent performance through its standardised geometry: a Ø32 mm cutting diameter combined with 4 flutes and a 90° cutting angle ensures predictable chip formation and even radial engagement. This results in improved surface quality and reduced vibration during passes. The design supports repeatable tool setting and facilitates reliable process control on series production parts. By using indexable inserts, the assembly limits downtime to a rapid insert change, sustaining production throughput. Secure clamping and easy maintenance for production continuity Designed with a 25 mm shank and a 35 mm effective cutting length, the cutter body offers a balanced connection between spindle and tool, enhancing rigidity for medium-duty operations. Fastening is secured with an M2.5x5.5 Torx screw, operated with a T8 key, enabling quick insert replacement without special tooling. The compact mass of 0.768 kg supports controlled dynamics in the tool holder and simplifies handling during changeovers. Routine maintenance focuses on torque checks and insert inspection, which keeps machine downtime to a minimum and supports predictable scheduling. Practical compatibility and straightforward shop-floor integration The tool is specified for use with APKT 1003 indexable inserts and aligns with inserts from YG-1, making it a flexible option where these insert systems are already standardised. Its universal insert interface and common fixation method reduce the need for unique spare items in the tool crib, lowering logistical complexity. The combination of indexable technology and the cutter body’s features supports an efficient cost-per-cut strategy: worn cutting edges are replaced rather than the entire tool, delivering economical operation over many cycles. Contact Metav Werkzeuge to discuss how the Teknik Makina S034TM can be integrated into existing tooling setups and to arrange delivery from our Emmerich stock Technical Data SKU: S034TM Manufacturer: Teknik Makina Product: Shank milling cutter for APKT 1003-1604 indexable inserts Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Facts Cutting diameter: 32 mm Shank diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.768 kg Special features Torx screw: M2.5x5.5 Torx key: T8 Indexable-insert system: APKT 1003–1604 compatibility Balanced design for reduced vibration Rapid insert-change capability FAQ What inserts fit this milling body? The Shank Milling Cutter S034TM is specified for APKT 1003 indexable inserts and supports the APKT 1003–1604 range; compatible inserts from YG-1 are suitable for this cutter body. How is the insert secured to the cutter? Insert retention uses an M2.5x5.5 Torx screw tightened with a T8 key, which enables quick and repeatable insert changes for the Teknik Makina S034TM cutter body. Which shank size is required for the tool holder? The tool features a 25 mm shank diameter; holders and adaptors sized for a 25 mm shank are appropriate when using the S034TM milling body. What cutting diameter and flute count does the tool offer? This cutter provides a Ø32 mm cutting diameter with 4 flutes, offering a balance between material removal rate and surface finish for standard milling tasks. Is this cutter suitable for high-speed machining? The S034TM is designed as a robust insert-carrying cutter body; cutting speed suitability depends on the chosen APKT inserts and machining parameters rather than on the body alone—select inserts and settings matched to the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high rigidity, precise insert compatibility and straightforward maintenance to keep production running smoothly; the 25 mm shank and 3-cut configuration ensure stable chip evacuation and repeatable results. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Indexable shank cutter (Schaftfräser) for APKT 1003–1604 — 25 mm shank, 3-flute | Teknik Makina The Indexable shank cutter (Schaftfräser) is a compact milling solution designed for use with APKT 1003–1604 indexable inserts, aimed at efficient shoulder and face milling in CNC and milling centres. 25 mm shank diameter 3 cutting edges for stable machining Compatible with APKT 1003–1604 inserts (YG‑1) 90° cutting angle for shoulder milling Consistent rigidity and predictable cutting performance for reliable production The tool’s 25 mm shank and overall 100 mm length combine to give a stiff, compact assembly that reduces chatter and improves surface finish compared with longer, slender holders. Fitted for APKT-type indexable inserts, the cutter converts insert geometry into consistent cutting results: the 3 cutting edges support balanced load distribution and improved tool life when compared with higher-flute tools in similar diameters. For operators unfamiliar with indexable systems, APKT inserts are mounted and secured on a pocketed cutter body, enabling straightforward replacement of the wear element without regrinding, which reduces setup time and maintains reproducible geometry across batches. Quick insert changes and secure fastening to cut downtime Insert replacement is achieved using the supplied Torx fastening arrangement: the M2.5x7 Torx screw kept under the insert pocket and a T8 Torx key for secure tightening. This familiar clamping standard minimises the risk of incorrect torque and secures repeatable seating of the insert, which is critical for precision work. The indexable concept allows rapid switching between insert grades and chipbreaker geometries when moving from finishing to roughing operations. The result is a system that supports planned maintenance practices and keeps spindle time productive, delivering measurable throughput improvements in job-shop and production environments. Application-focus: geometry, reach and working angle explained A 90° cutting angle means the cutter is optimised for shoulder milling and accurate face operations where square shoulders and tight tolerances matter. The 35 mm cutting length provides sufficient engagement for shallow slots and shoulder passes while limiting overhang that can compromise stiffness. Weighing 0.376 kg and featuring a nominal 25 mm diameter, the tool is suited to medium-duty milling work where indexable insert economics are preferred. Operators selecting insert grade and coating should pair the cutter with APKT 1003–1604 inserts from recognised suppliers such as YG‑1 to match workpiece material and cutting conditions for best results. For application support or to specify the Teknik Makina indexable shank cutter for a particular machine or material, contact Metav Werkzeuge for tailored advice via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants assist with insert selection and process integration. Technical data SKU: S033TM Manufacturer: Teknik Makina Article designation: Indexable shank cutter for APKT 1003–1604 indexable inserts Facts Shank diameter: 25 mm Cutting length (shank): 35 mm Overall length: 100 mm Diameter: 25 mm Cutting edges: 3 Weight: 0.376 kg Cutting angle: 90° Special features Compatible with APKT 1003–1604 indexable inserts Insert supplier: YG-1 Torx screw: M2.5x7 Torx key size: T8 FAQ What types of inserts fit this cutter? The cutter accepts APKT 1003–1604 indexable inserts; compatibility is specified to those APKT sizes and standard geometries. Is a specific torque required for the Torx screw? Use the recommended Torx key size T8 and ensure the M2.5x7 screw is tightened to the insert supplier’s torque guidance to guarantee correct seating and repeatable results. Can the cutter be used for shoulder milling on hardened materials? The tool’s 90° cutting angle suits shoulder milling, but for hardened materials consult the insert grade and coating recommendations; Metav Werkzeuge can advise on suitable insert choices. What are the key dimensions to check when selecting this holder? Key dimensions are 25 mm shank diameter, 35 mm cutting length, 100 mm overall length and the nominal 25 mm cutter diameter; these define reach, rigidity and machine-holding requirements. Which insert manufacturers pair well with this cutter? The tool is specified as compatible with APKT inserts and is commonly used with inserts from suppliers such as YG‑1; Metav Werkzeuge can recommend alternative insert brands and grades. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid Ø20 mm shank, 3 cutting edges and a 30 mm cutting length for consistent milling performance; the compact 100 mm overall length keeps setups precise. Order the S032TM directly via Metav Werkzeuge or ask our consultants if needed. S032TM indexable milling cutter — for APKT 1003-1604 indexable inserts, Ø20 mm shank (Teknik Makina) S032TM is an indexable milling cutter designed to accept APKT 1003–1604 inserts and to deliver stable material removal in CNC and production milling applications Ø20 mm shank diameter for standard toolholders Compatible with APKT 1003 indexable inserts 3 cutting edges for balanced material removal 30 mm effective cutting length for deeper passes Torx screw M2.5x5.5; T8 key for secure clamping Enhanced rigidity for repeatable production results The solid Ø20 mm shank and compact 100 mm overall length reduce deflection during high-speed milling, which results in more predictable toolpaths and consistent part quality. With 3 cutting edges, the tool body balances chip load across the circumference, lowering vibration and promoting even wear across inserts. The geometry — a 90° cutting angle — supports perpendicular face milling and stable engagement, so cycle times can be kept tight without sacrificing finish quality. These mechanical properties translate directly into measurable production benefits: improved surface consistency and fewer reworks. Fast insert changes and secure clamping to cut downtime Insert retention is handled by a Torx system ( M2.5x5.5 screw) operated with a T8 key, enabling repeatable clamp torque and quick insert swaps on the shop floor. The cutter accepts APKT 1003 indexable inserts and is compatible with inserts from YG-1, allowing use of common insert grades and geometries for different materials. Indexable inserts mean only the cutting insert is replaced when worn, not the whole tool body, supporting cost-effective tooling management and straightforward maintenance procedures in busy production environments. Practical fit for workshop and industrial milling tasks This indexable cutter is specified for applications where a moderate depth of cut and reliable toolholding are priorities: the 30 mm cutting length provides ample engagement for pocketing, face milling or slotting passes within its diameter range. The compact mass (approx. 0.342 kg) simplifies handling and reduces spindle load during tool changes. As a component in a coordinated tooling strategy, the body complements standard toolholders and is suited to machine shops and production lines seeking dependable repeatability with indexable insert systems. For buyers prioritising procurement certainty, Metav’s European distribution ensures a practical supply route and technical consultation where required. For technical advice or to arrange supply of the Teknik Makina S032TM from Metav Werkzeuge — including availability and interchange options for APKT 1003 inserts — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, workshop-focused support. Technical data SKU: S032TM Manufacturer: Teknik Makina Product: Indexable milling cutter for APKT 1003-1604 indexable inserts Shank diameter: 20 mm Cutting length (shank): 30 mm Number of cutting edges: 3 Cutting angle: 90° Overall length: 100 mm Diameter: 20 mm Weight: 0.342 kg Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Torx screw: M2.5x5.5 Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; compatible insert grades from YG-1 are commonly used with this body. What is the shank diameter and overall length? Shank diameter is 20 mm and overall length is 100 mm, suited to standard toolholders for compact setups. How many cutting edges does the tool body provide? The body is built for 3 cutting edges, which helps balance chip load and reduce vibration during milling. What fixing hardware is used for insert clamping? Insert clamping uses a M2.5x5.5 Torx screw tightened with a T8 key to ensure repeatable clamp torque. For which machining tasks is this cutter intended? The design is aimed at milling operations utilising APKT 1003 inserts where a 30 mm cutting length and stable perpendicular engagement (90°) are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid 16 mm shank diameter, a 90° cutting angle and a compact 100 mm overall length for highly stable face milling with indexable inserts. The modular insert system reduces tooling cost while the included Torx screw and key ensure fast mounting. Order the S031TM directly via Metav Werkzeuge or ask our consultants if needed. Shank cutter S031TM — for APKT 1003‑1604 indexable inserts, 16 mm shank (Teknik Makina) A robust shank cutter designed for face milling and light shoulder operations with APKT 1003 / APKT 1604 indexable inserts, optimised for stability and fast indexable‑insert changes Shank Ø16 mm for high rigidity Compatible with APKT 1003/1604 inserts 90° cutting angle for face and shoulder milling Includes M2.5x5.5 Torx screw and T8 key Stable machining with a rigid 16 mm shank for consistent results The S031TM is engineered as a compact, high‑rigidity shank milling cutter with a 16 mm shank diameter and a 100 mm overall length that together reduce deflection under load. With two cutting edges and a 90° cutting angle, the tool produces clean faces and reliable shoulder finishes while maintaining dimensional accuracy. Using indexable inserts means only the insert needs replacing after wear, lowering per‑cutting cost and downtime compared with solid‑carbide alternatives. The cutter body’s mass and geometry contribute to vibration damping so cycle times can be kept tight without compromising surface quality. Fast set‑up and predictable maintenance for production schedules The holder is supplied ready for mounting with an M2.5x5.5 Torx screw and a T8 key, enabling secure clamping of APKT inserts from recognised suppliers such as YG‑1. This reduces setup time and minimises the risk of incorrect fastening, which is crucial in batch production and just‑in‑time workflows. The indexable‑insert approach supports quick tool reconditioning: when an edge is worn, replace or reindex the insert and continue — no regrinding, no long tool lead times. The modest weight (0.275 kg) and compact form factor make handling straightforward on bench or in a tool magazine. Practical benefits for workshops and CNC shops seeking efficiency Designed for CNC milling and manual set‑ups where repeatability matters, this cutter combines predictable cutting geometry with economic operation. Compatibility with APKT 1003 inserts (also APKT1604) gives access to a wide range of grades for steel, stainless steel or cast materials depending on the chosen insert grade. The 2‑edge configuration balances metal removal and surface finish, offering a cost‑effective solution for light to medium machining tasks. For purchasing and logistics, Metav provides a transparent supply channel and quick dispatch from stock, supporting continuous production without long waits. For procurement or technical advice on integrating the S031TM into an existing toolset, contact Metav Werkzeuge — reliable delivery from Emmerich and expert consultancy are available to ensure the right insert grade and cutting parameters are selected. Technical data Article number: S031TM Manufacturer: Teknik Makina Suitable for indexable inserts: APKT 1003 / APKT 1604 Compatible insert manufacturer: YG‑1 Dimensions & weights Shank diameter: 16 mm Cutting length (shank cutting): 30 mm Overall length: 100 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.275 kg Features & fittings Torx screw: M2,5x5,5 Torx key size: T8 Insert type fitted: APKT 1003 Application: face and shoulder milling with indexable inserts FAQ What insert types fit this cutter? The cutter accepts APKT 1003 / APKT 1604 indexable inserts; APKT 1003 is the primary insert designation for this cutter. Which insert manufacturers are compatible? The body is compatible with inserts from YG‑1 and other suppliers that offer APKT 1003 / 1604 plates. Is the tool ready to mount straight away? Yes. The S031TM is delivered with an M2.5x5.5 Torx screw and requires a T8 key for secure mounting. What machining tasks is this cutter best for? It is optimised for face milling and light shoulder operations where a 90° cutting angle and stable shank are beneficial. How does using indexable inserts save costs? Replacing worn inserts is faster and cheaper than regrinding solid tools, reducing downtime and per‑edge tooling cost in series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable, high‑performance milling with a 50 mm diameter and five cutting edges delivers consistent material removal and reduced vibration; the 25 mm shank provides secure clamping for stable operation. Order the tool directly via Metav Werkzeuge or consult the technical team for application and compatibility advice. S350TM Shaft milling cutter – 50 mm, 5‑flute, for APKT 1003 (Teknik Makina) The S350TM is a robust shaft milling cutter engineered for heavy face and peripheral milling using F75° APKT 1003 indexable inserts, offering a balance of removal rate and surface quality for workshop and production environments. 50 mm cutting diameter Five cutting edges for balanced removal 25 mm shank for secure clamping Compatible with APKT 1003 indexable inserts Consistent removal and predictable process performance The milling tool combines a 50 mm diameter with five cutting edges to reduce harmonics and distribute cutting forces evenly. This geometry supports higher feed per tooth at stable chip formation, which leads to a more predictable cycle time and consistent surface finish. Using indexable inserts like APKT 1003 means cutting edges can be renewed quickly without regrinding the tool body, keeping machine uptime high and reducing overall tooling cost per part. Secure clamping and straightforward insert handling A 25 mm shank ensures rigidity in common toolholders and reduces radial runout under load, improving tool life and repeatability. Insert retention uses an M2.5×5.5 screw secured with a Torx T8 key, enabling rapid insert changes while maintaining correct seating and cutting geometry. Clear access to the screw and standardised fixing means less downtime during maintenance and a straightforward replacement routine for operators and technicians. Efficient in face and peripheral milling operations Designed with an F75° insert seat and a 90° cutting angle, the tool is optimised for both face and light peripheral milling tasks where a compromise between material removal and surface quality is required. The overall length of 100 mm offers reach without excessive overhang, helping to control deflection. This combination supports tight process windows and makes the cutter suitable for batch production where repeatability and throughput are priorities. Built for workshop reliability and simple logistics Weighing 0.583 kg, the tool body is compact yet robust, allowing quick handling and easy storage. Compatibility with APKT 1003 inserts from established vendors such as Korloy simplifies procurement and spare‑parts management. The modular nature of the system reduces total cost of ownership: worn inserts are replaced rather than the complete cutter, and standard fixing hardware keeps inventory needs minimal. This results in dependable performance across shifts and operators. For a tailored compatibility check or to secure supply of the Teknik Cutting Tools S350TM shaft milling cutter, contact Metav Werkzeuge in Emmerich for prompt technical advice and reliable delivery. Technical data Article number: S350TM Manufacturer: Teknik Makina Description: Schaftfräser for F75° APXT 1003 Indexable Inserts Core dimensions Diameter: 50 mm Cutting edges: 5 Overall length: 100 mm Shank diameter: 25 mm Cutting length: 35 mm Weight: 0.583 kg Cutting angle: 90° Compatibility & features Compatible with APKT 1003 indexable inserts Fixing screw: M2.5×5.5 Torx key: T8 Suitable insert manufacturer: Korloy Geometry: F75° FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; the seat is designed for the F75° geometry used with these inserts. What is the required fixing hardware for insert changes? Insert retention uses an M2.5×5.5 screw tightened with a Torx T8, ensuring secure seating and easy replacement. What shank size is needed for correct clamping? A toolholder that accepts a 25 mm shank is required; the shank diameter supports stable clamping for the stated cutting conditions. What milling tasks is the tool best suited for? The cutter is optimised for face and peripheral milling where a balance of material removal and surface finish is needed, benefitting batch and serial production. Who manufactures and supplies the S350TM shaft milling cutter? The S350TM is supplied by Teknik Makina (Teknik Cutting Tools) and distributed via Metav Werkzeuge, with compatibility and technical support available from the distributor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution that combines stable engagement and straightforward maintenance: a 45 mm cutting diameter with 4 flutes and a 75° cutting angle provides consistent material removal, while the 25 mm shank and precise Torx clamping enable rapid insert changes and reliable seating—order directly via Metav Werkzeuge or request application advice from our technical team. Shaft milling cutter S348TM – Indexable insert milling cutter, Ø45 mm, 4 flutes (Teknik Makina) Shaft milling cutter S348TM designed for heavy-duty indexable insert milling with APKT 1003 style inserts, suited to versatile milling applications where stable engagement and fast insert replacement are priorities Ø45 mm cutting diameter for high stock removal Compatible with APKT 1003 indexable inserts (Korloy) 75° cutting angle for secure cutting engagement Secure clamping via M2.5x5.5 Torx screw, T8 key Increase throughput with a stable 75° cutting geometry The S348TM is engineered to keep cutting forces predictable: the 75° cutting angle reduces radial shock and promotes steady chip formation, while the 4 flutes provide a balanced distribution of cutting load. With a Ø45 mm cutting diameter and a 35 mm effective cutting length, the tool achieves higher material removal rates with fewer vibrations compared with less optimised geometries. This translates into shorter cycle times and reduced need for secondary passes, supporting more efficient production planning and machine utilisation. Quick setup and reliable insert system for minimal downtime Designed for indexable-insert workflows, the cutter accepts APKT 1003 inserts and uses a Torx clamping screw M2.5x5.5 tightened with a T8 key for positive, repeatable seating. The 25 mm shank and 100 mm overall length ensure secure mounting in standard toolholders while keeping the assembly compact for operator handling. The modular insert system means worn cutting edges are replaced in seconds, improving uptime and simplifying tool inventory management for maintenance teams. Robust geometry that supports consistent machining results Although lightweight at 0.535 kg, the tool’s geometry and flute configuration have been optimised for balance and steady engagement across a range of milling operations. The tool’s 35 mm cutting length provides a good compromise between reach and rigidity, making it suitable for shoulder milling and light profiling without unnecessary overhang. The combination of precise clamp hardware and engineered cutter body produces reproducible results job after job, helping to maintain surface quality and dimensional stability on recurring production runs. Contact Metav Werkzeuge for availability of the Teknik Cutting Tools S348TM shaft milling cutter and for tailored recommendations on insert selection and toolholder setup Technical data SKU: S348TM Eclass: 21180806 ETIM: EC011860 Facts Cutting diameter: 45 mm Number of cutting edges: 4 Shank diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Weight: 0.535 kg Special features Compatible inserts: APKT 1003 (Korloy) Cutting angle: 75° Torx screw: M2.5x5.5 Torx key size: T8 FAQ Which indexable inserts fit this cutter? The S348TM accepts APKT 1003 indexable inserts; Korloy-compatible grades are commonly used with this cutter. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter and the 100 mm overall length when selecting a collet or holder for the S348TM to ensure secure clamping and sufficient rigidity. Which screw and key are required for insert clamping? Insert clamping is performed with a M2.5x5.5 Torx screw using a T8 Torx key, ensuring consistent and repeatable seating of the insert. How long is the effective cutting edge and what does that mean for reach? The S348TM offers a 35 mm cutting length, providing a balance between reach and rigidity suitable for shoulder milling and moderate-depth passes. Is the cutter suitable for heavy removal operations? The cutter’s Ø45 mm diameter and 4-flute layout support effective stock removal; correct cutting data and secure clamping are essential for heavy cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid cutter that combines a 40 mm cutting diameter, a 75° cutting angle and compatibility with APKT 1003 indexable inserts for reliable, repeatable milling results; order the tool directly via Metav Werkzeuge or contact the consultants for application advice. Shaft Milling Cutter S346TM – 40 mm diameter, for APKT 1003 indexable inserts (Teknik Makina) The Shaft Milling Cutter S346TM is a shank-mounted milling tool engineered for indexable-insert applications with a 75° cutting geometry, suitable for medium‑duty slotting and face milling where tool stability and simple insert replacement are priorities 40 mm cutting diameter Four cutting edges Shaft Ø 25 mm Compatible with APKT 1003 inserts High material removal with controlled cutting geometry The cutter’s 40 mm diameter and the 75° cutting angle deliver an effective combination of axial engagement and radial support, allowing consistent chip formation while reducing load peaks on each insert. With four cutting edges, the tool balances productivity and surface finish: every rotation engages multiple edges for steady material removal, while indexable inserts ensure quick restoration of cutting performance. The documented geometry is particularly useful where reproducible results are required across series production runs, and the 75° angle improves flank support compared with more acute geometries, lowering the risk of premature insert chipping. Stable shank design for accurate set‑up and low vibration A robust Ø 25 mm shank and a total length of 100 mm combine to provide secure clamping in standard tool holders and reduced overhang effects during milling. The 35 mm cutting length gives an effective balance between reach and rigidity; as a result, runout and chatter are minimised, which benefits dimensional accuracy and tool life. The tool’s modest mass (0.494 kg) contributes to predictable dynamics on the spindle, simplifying process calculations for feeds and speeds and helping to maintain a consistent surface quality in repetitive machining tasks. Fast serviceability and broad insert compatibility Maintenance is straightforward: the insert seat accepts APKT 1003 indexable inserts and is compatible with Korloy‑type geometries, allowing access to a wide range of cutting grades. Fast clamp replacement is achieved using the supplied Torx screw specification M2.5x5.5 and a T8 Torx key, making insert changes quick and safe on the shop floor. Indexable inserts reduce downtime compared with regrindable tooling and, combined with the cutter’s standardised interface, permit rapid adaptation to different cutting materials or cutting edge specifications without replacing the holder. Contact Metav Werkzeuge for a technical quotation on the Teknik Cutting Tools S346TM, request compatible APKT 1003 inserts or arrange an application consultation from our Emmerich team Technical data Article number: S346TM Manufacturer: Teknik Makina Weight: 0.494 kg Facts Cutting diameter: 40 mm Shaft diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Cutting edges: 4 Cutting angle: 75° Special features Compatible with APKT 1003 indexable inserts Suitable for Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 FAQ How are the indexable inserts secured on this cutter? The S346TM holds APKT 1003 indexable inserts with an M2.5x5.5 Torx screw; a T8 key is used for tightening and loosening during service. Which insert manufacturers fit the tool seat? The cutter is compatible with Korloy‑type inserts and specifically set up for APKT 1003 geometries, enabling use of standard indexable grades. What dimensions are relevant for machine set‑up? Use the cutter’s 40 mm diameter, Ø25 mm shank, 35 mm cutting length and 100 mm overall length for holder selection and tool offset programming with the S346TM. How many effective cutting edges are available per revolution? The tool features four cutting edges, which promotes smooth cutting action and balanced chip removal on each spindle rotation. What is the article number and who supplies the tool? The article number is S346TM; it is produced by Teknik Makina and supplied via Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact solution that combines robust insert compatibility with a stable shank design for consistent results and reduced changeover times; order directly via Metav Werkzeuge or consult their specialists for application advice. Shank milling cutter for F75° APKT 1003 indexable inserts – Teknik Makina Shank milling cutter for medium-duty face and shoulder milling with indexable inserts, suited to operations that prioritise quick insert changes and machining stability Compatible with Korloy APKT 1003 inserts 32 mm cutting diameter, 25 mm shank 75° cutting angle for versatile face milling Three cutting edges for stable material removal Consistent results through proven geometry and insert compatibility The Shank milling cutter is built around a defined cutting geometry that supports reliable chip formation and surface finish. With a 75° cutting angle and a 32 mm cutting diameter, the tool enables controlled face and shoulder milling on a range of workpieces. Compatibility with APKT 1003 indexable inserts from Korloy reduces toolholder complexity and makes insert procurement straightforward. The three-flute design ensures stable cutting forces and helps maintain dimensional accuracy during interrupted cuts. Technical specifications like the 25 mm shank and 100 mm overall length make the cutter suitable for standard arbors and extensions commonly found in workshop setups. Faster changeovers and predictable tool life for productive shops Tool changes are simplified by the supplied fastening arrangement: a M2.5x5.5 Torx screw (T8) secures each insert, allowing quick replacement and minimising downtime. The indexable-insert concept separates cutting geometry from the body, so wear on the cutter body does not directly affect cutting performance; worn edges are swapped for fresh ones, restoring cutting behaviour without complex regrinds. The combination of insert standardisation and a compact shank contributes to predictable maintenance intervals and lower lifecycle costs, while the measured mass of 0.413 kg ensures manageable handling during tool changes. Practical handling, integration and workshop benefits Workshops benefit from a compact package that integrates easily into existing toolrooms: the 25 mm shank diameter fits common collets and holders, while an overall length of 100 mm balances reach with rigidity. Three cutting edges distribute the load for smoother engagement and reduced vibration, which supports improved surface quality and longer insert life. The tool’s design aligns with corporate metrology and quality expectations by providing consistent repeatable results in production environments. For users who require tailored advice on machining parameters or holder compatibility, Metav Werkzeuge provides technical guidance from its Emmerich location to ensure efficient implementation. For professional milling operations using Teknik Makina components, contact Metav Werkzeuge for application guidance and assured supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S344TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Cutting diameter: 32 mm Shank diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Number of cutting edges: 3 Cutting angle: 75° Weight: 0.413 kg Designs / Special features Compatible inserts: APKT 1003 (Korloy) Torx screw: M2.5x5.5 (T8) Indexable-insert system Three-flute geometry FAQ What inserts fit this shank milling cutter? The cutter is designed for APKT 1003 indexable inserts; compatibility with Korloy inserts is specified for reliable seating and cutting geometry. Is the shank suitable for standard tool holders? Yes, the 25 mm shank diameter conforms with common collet and holder sizes used in general workshop and production environments. How are the inserts secured? Inserts are fastened with an M2.5x5.5 Torx screw (T8), enabling quick and secure replacement without special tooling. What machining tasks does this cutter cover best? The tool is intended for face and shoulder milling where a 75° cutting angle and three-edge geometry deliver stable chip evacuation and consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high removal rates and secure clamping: the cutter’s 32 mm tool holder and 46 mm cutting height enable deeper passes while maintaining stiffness, and the compatibility with APKT 1003 inserts from Korloy keeps tooling costs predictable; order directly from Metav Werkzeuge or consult the specialists for integration advice. Igelfräser — Indexable insert milling cutter with 32 mm holder, 46 mm cutting height (Teknik Makina) A Igelfräser designed as an indexable milling head for efficient roughing and face milling applications, compatible with standard APKT 1003 inserts and tailored to stable, high‑material‑removal operations. 32 mm tool holder diameter Compatible with APKT 1003 inserts 46 mm effective cutting height 15 cutting edges for high material removal Faster cycle times with stable clamping and deeper cuts The combination of a 32 mm tool holder and a 46 mm cutting height delivers a balance of rigidity and reach that benefits high‑volume machining. This configuration reduces chatter and allows for more aggressive axial engagement, which in turn shortens cycle times and increases throughput. By accepting APKT 1003 indexable inserts, the head simplifies inventory management and keeps regrinding or retooling downtime to a minimum, so operational efficiency is improved without complex changeovers. Predictable performance through standardised inserts and secure fixing Compatibility with Korloy APKT 1003 inserts creates a predictable performance envelope: insert geometry and grade selection define cutting forces and surface finish, while the proven clamping method — fixed with M2.5x5.5 Torx screws and the T08 key — ensures repeatable seating and quick index changes. For workshops that value repeatability, this results in consistent part quality and lower scrap rates. The indexable system also supports cost‑efficient maintenance since worn inserts are exchanged rather than the whole cutter. Designed for heavy material removal with many cutting edges With 15 cutting edges, the cutter head distributes cutting load across multiple inserts, reducing per‑edge wear and enabling higher material removal per revolution. This arrangement is particularly effective on roughing passes and large surface engagements where productivity is prioritised. The head’s overall length of 200 mm gives sufficient overhang for common setups while keeping deflection low, and the modest mass of 1.144 kg contributes to controlled dynamics in spindle‑driven operations. Choose this Teknik Makina milling head for robust roughing performance and streamlined insert logistics — order through Metav Werkzeuge for reliable supply and application guidance from the Emmerich‑based specialists Technical Data Article number: HF17TM Manufacturer: Teknik Makina Diameter: 32 mm Tool holder diameter: 32 mm Effective cutting height: 46 mm Overall length: 200 mm Weight: 1.144 kg Cutting edges: 15 For indexable inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T08 FAQ What insert type does this milling head require? The milling head uses APKT 1003 indexable inserts; selecting the appropriate grade determines wear resistance and surface finish for the task. Is the cutter compatible with Korloy inserts? Yes — the tool is specified for use with inserts from Korloy, ensuring interchangeability with commonly stocked grades. What is the shank or holder diameter of the tool? The tool features a 32 mm tool holder diameter, providing a stable connection to the spindle or arbor. How deep can the cutter engage axially? The cutter provides an effective cutting height of 46 mm, enabling deeper axial cuts compared with short‑reach heads. Which fasteners are used for insert clamping? Inserts are secured with M2.5x5.5 Torx screws and a T08 Torx key for reliable, repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, indexable design with a 25 mm diameter and 8 cutting edges ensures efficient material removal and precise profiling; the 37 mm cutting height supports deeper passes where required. Order the insert milling cutter HF16TM via Metav Werkzeuge or request specialist advice from our consultants for seamless integration into production. Teknik Makina HF16TM insert milling cutter — 25 mm diameter, 8 cutting edges The Teknik Makina HF16TM insert milling cutter is an indexable milling tool for APKT 1003 inserts, engineered for precise profiling and finishing operations in CNC milling and production environments. 25 mm diameter for compact profiling Eight cutting edges for sustained productivity 25 mm shank for secure clamping Compatible with Korloy APKT 1003 inserts Efficient material removal with consistent results The HF16TM’s combination of a 25 mm diameter and 8 cutting edges delivers stable cutting conditions and a high material removal rate while preserving surface quality. The 37 mm cutting height allows for deeper engagement without frequent step-overs, reducing cycle times in repetitive passes. As an indexable milling cutter, it separates cutting geometry from the holder, enabling fast recovery of cutting performance by simply rotating or replacing an insert rather than regrinding the tool. This design reduces per-part tooling cost and supports continuous, predictable output in batch production. Fast insert changes and secure fixing minimise downtime Maintenance cycles are shortened by the straightforward insert arrangement for APKT 1003 inserts and the use of a standard Torx fixing. The cutter uses an M2.5x5.5 Torx screw and a T08 key size, ensuring secure clamping and rapid exchange under shop-floor conditions. Compatibility with Korloy replacement inserts widens sourcing options and helps maintain spindle uptime. The indexable concept also keeps tool balance and repeatability stable, benefitting both high-feed finishing and contouring tasks where repeat accuracy matters. Robust holder geometry for reliable clamping and rigidity The tool’s 25 mm shank and 200 mm overall length were configured to balance accessibility and rigidity for common milling setups. The solid shank diameter supports conventional collet and chuck systems, reducing chatter risk and improving tool life when used within recommended parameters. The cutter’s multi-edge configuration distributes cutting forces across several inserts, lowering load per insert and enabling more consistent wear behaviour, which gives predictable tool-change intervals and simplifies production planning. Seamless supply and technical assurance from Metav Metav Werkzeuge combines broad inventory with a technical quality filter in Emmerich, ensuring that high-precision tools are accessible to workshops and production lines across Europe. With a wide product range and decades of expertise, Metav supports integration of machining tools like this indexable cutter into existing workflows and offers clarity on logistics and availability. The HF16TM benefits from that reliable supply chain and the option to consult experienced specialists for application-specific recommendations, helping to reduce the risk of unsuitable tooling choices. Secure reliable stock and technical guidance from Metav Werkzeuge — request application advice or a tailored delivery proposal for the Teknik Makina HF16TM insert milling cutter directly from Metav Werkzeuge by e‑mail or phone. Technical data Article number: HF16TM Manufacturer: Teknik Makina Diameter: 25 mm Shank diameter (d): 25 mm Cutting height: 37 mm Number of cutting edges: 8 Overall length: 200 mm Weight: 0.727 kg For indexable inserts: APKT 1003 Compatible insert supplier: Korloy Torx screw: M2.5x5.5 Torx key size: T08 Tool type: Insert milling cutter (indexable) FAQ What inserts are compatible with this cutter? The HF16TM is designed for APKT 1003 indexable inserts and is compatible with Korloy insert variants specified for that geometry. How is the insert secured in the cutter? Inserts for the HF16TM are fastened with an M2.5x5.5 Torx screw; a T08 key is used for tightening and removal to ensure secure clamping. What clamping systems suit the HF16TM? The tool’s 25 mm shank is suitable for standard collet chucks and precision holders capable of accepting a 25 mm diameter shank for optimal rigidity. Can the cutter handle finishing as well as roughing? The multi-edge arrangement of the HF16TM provides a balance between material removal and surface finish; using appropriate feed and depth settings yields efficient roughing while maintaining acceptable finishing quality. Who supplies technical support and availability for this tool? Metav Werkzeuge supplies the Teknik Makina HF16TM and provides application advice and logistics support to assist with tool selection and procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Characteristics: Order Number: HF15TM Item: Shoulder Milling usable with APKT 1003 Indexable Inserts of Korloy Brand: Teknik Makina Quantitative Specifications: Diameter: 20mm Cutting Edges: 6 Weight: 0.481kg Total length: 200mm Cutting Height: 28mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the HF13TM's combination of compact dimensions, high cutting-edge count and simple insert replacement to increase throughput while keeping maintenance time low; order directly via Metav Werkzeuge or consult the product specialists for integration advice. Igelfräser HF13TM — Rotary cutter head, Ø 40 mm, 18 cutting edges (Teknik Makina) The Igelfräser HF13TM is a rotary cutter head designed for indexable-insert milling with APKT 1003 inserts, offering a compact profile for profiling and high-feed surfacing on machines with a 32 mm toolholding interface. Ø 40 mm head diameter 18 cutting edges for smooth material removal Compatible with APKT 1003 inserts 32 mm shank for secure mounting Faster cycle times through increased cutting density A high tooth count is the central performance driver: with 18 cutting edges distributed on a compact Ø 40 mm head, chip load per edge is reduced while material removal remains efficient. The result is a more constant cutting force and reduced vibration, which translates into shorter cycle times and improved surface quality. The design is especially beneficial where frequent shallow passes are preferred over aggressive single cuts; quieter operation and lower spindle load contribute to extended tool life and more predictable production scheduling. Quick indexable-insert changes cut downtime The cutter accepts APKT 1003 indexable inserts from recognised suppliers such as Korloy, enabling rapid replacement of worn tips without remounting the entire tool. Insert retention uses Torx fastenings (M2.5x5.5), tightened with a T08 key, which simplifies maintenance and standardises workshop tooling. This indexable system reduces consumable costs compared with brazed or solid tools: only the small insert bodies are replaced, while the cutter body remains in service. Clear labelling of compatible inserts and standardised fixing hardware supports lean spare-part management and faster operator training. Stable mounting and predictable geometry for consistent results Mechanical stability starts with the connection: a 32 mm shank provides a robust interface for many common toolholders, while the 55 mm cutting height and 150 mm overall length offer a practical balance between reach and rigidity. The cutter's mass (approximately 1.1 kg) helps damp minor resonances, and the compact overall geometry reduces deflection at typical feed rates. For production environments where repeatability is essential, this geometry supports consistent component tolerances from part to part. Compatibility with standard insert formats also means known cutting parameters can be transferred quickly between machines. Contact Metav Werkzeuge for project-specific advice on integrating the HF13TM into existing toolsets and to arrange supply from our Emmerich warehouse — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: HF13TM Manufacturer: Teknik Makina Data Diameter: 40 mm Cutting edges: 18 Shank diameter: 32 mm Cutting height: 55 mm Overall length: 150 mm Weight: 1.1 kg Special features Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T08 FAQ What inserts are compatible with this cutter head? The cutter head is designed for APKT 1003 indexable inserts; Korloy is listed as a suitable insert manufacturer for the HF13TM rotary cutter head. How is the insert secured and which tool is needed for changes? Inserts are retained by Torx screws (M2.5x5.5) and require a T08 Torx key for tightening and removal on the HF13TM. What shank diameter is required for mounting the cutter? The tool features a 32 mm shank diameter and is intended for holders compatible with that toolholding interface. Can the HF13TM be used for profiling and surface removal? Yes, the combination of 18 cutting edges and 55 mm cutting height makes the HF13TM suitable for profiling and controlled surface removal tasks where many small, stable cuts are preferred. What are the physical dimensions and mass of the cutter head? The HF13TM has a 40 mm head diameter, 150 mm overall length and weighs approximately 1.1 kg, providing a balance between reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact Ø63 mm diameter and 6 cutting edges for efficient face milling; the secure Torx fastening (M2.5x7 / T8) and a 22 mm bore ensure rigid clamping and reliable chip control — order via Metav Werkzeuge or consult the product specialists if required. Face milling head for APKT 1604 and APXT 1003 indexable inserts — Teknik Makina Face milling head designed for heavy-duty face milling operations with modern indexable inserts Compact Ø63 mm cutter head Accepts APKT 1604 and APXT 1003 inserts Six cutting edges for efficient cut Torx M2.5x7 fastening with T8 key Increased throughput with compact, rigid tooling The compact milling head delivers measurable productivity gains thanks to its Ø63 mm diameter combined with a short overall length of 45 mm, which reduces overhang and improves stiffness on the spindle. A 22 mm bore ensures a secure fit to the toolholder, lowering vibration and enabling higher stable feed rates. With 6 cutting edges, the toolhead supports sustained material removal while maintaining predictable tool life. These characteristics translate into shorter cycle times and fewer interruptions on the shop floor, making the component particularly suitable where consistent face milling performance is required. Reliable clamping and swift insert changes Secure clamping is achieved by the specified Torx assembly: M2.5x7 fixing screws tightened with a T8 key. This combination ensures consistent repeatability after insert changes and reduces the risk of movement under load. The head is engineered for common indexable geometries and is compatible with APKT 1604 and APXT 1003 types, including inserts from Korloy, which simplifies stockkeeping and tool preparation. The design supports quick replacement of cutting edges, helping to keep machine downtime to a minimum and supporting predictable production planning. Compact mass and pragmatic shop-floor benefits At just 0.63 kg, the milling head is light enough to limit additional spindle load yet robustly constructed to withstand regular machining cycles. The modest mass, paired with the reduced tool overhang, contributes to lower spindle wear and improved surface finish consistency. The installed 75° cutting angle helps achieve effective chip formation on typical face-milling routines, while the geometry supports both roughing passes and medium-finish operations without complex setup changes. Compatibility-focused design for efficient tooling systems Created as an indexable-insert holder, the head accepts APKT-style plates and is also listed for APKT 1003 variants, offering flexibility across similar insert formats. The specified interface dimensions and fastening standard allow integration into existing tool sets without the need for bespoke holders. For procurement and workshop managers, this means simplified inventory, fewer toolholders to maintain and a direct route to replacing wear items with a component that aligns with widely used insert standards. For reliable supply of this Teknik Makina face milling head (SKU T452TM) and tailored advice on integrating it into an existing tooling set, contact Metav Werkzeuge — our consultants in Emmerich will assist with selection and delivery. Technical Data Article number: T452TM Manufacturer: Teknik Makina Product: Face milling head Compatibility: for APKT 1604 and APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Facts Diameter: 63 mm Cutting edges: 6 Overall length: 45 mm Bore / shank diameter: 22 mm Weight: 0.63 kg Cutting angle: 75° Special features Torx screw M2.5x7 Torx key T8 required Suited for APKT 1003 insert type ECLASS: 21181015 FAQ Which insert types fit this milling head? The face milling head is designed for APKT 1604 and APXT 1003 indexable inserts; it is also suitable for APKT 1003 plate formats and compatible with Korloy insert geometries. What fastening hardware is required for installation? Assembly uses M2.5x7 Torx screws tightened with a T8 key as specified for the Teknik Makina head (SKU T452TM). How does the 22 mm bore benefit machining performance? A 22 mm bore provides a rigid interface with the toolholder, reducing vibration and enabling more stable cutting conditions for improved surface finish and tool life. What are the principal dimensions and mass of the tool? Key dimensions are Ø63 mm diameter, 45 mm overall length, and a mass of 0.63 kg, supporting compact setups with limited overhang. Can this head be used for both roughing and finishing? Yes. The geometry and 75° cutting angle provide versatility for robust material removal as well as medium-finish operations when paired with appropriate inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of quick insert changes, sturdy clamping and compact dimensions to keep machining cycles efficient and repeatable; order the tool via Metav Werkzeuge or consult our specialists for technical clarifications. Igelfräser HF12TM — 32 mm indexable-insert milling cutter (APKT 1003 compatible) by Teknik Makina The Igelfräser HF12TM is a compact indexable-insert milling cutter designed for high-efficiency peripheral milling with quick insert replacement and secure fastening for industrial shop-floor use Indexable APKT 1003 compatible 32 mm tool diameter 46 mm cutting height Secured with M2.5x5.5 Torx screws T08 Faster set-up through standardised inserts and secure fixing The HF12TM is built around compatibility with APKT 1003 indexable inserts, a common triangular insert format that simplifies inventory and replacement. By accepting standard inserts from manufacturers such as Korloy, the cutter reduces procurement complexity and downtime associated with bespoke tooling. The Torx M2.5x5.5 fixing screws and specified T08 key enable repeatable clamping torque, which supports consistent tool behaviour between changeovers. For production environments where set-up time equals lost minutes on the shop floor, the combination of standard inserts and secure screw fixing delivers a measurable improvement in process reliability. Compact dimensions that retain cutting capacity With a nominal diameter and shank of 32 mm and an overall length of 150 mm, this cutter offers a compact footprint while maintaining a significant cutting zone. The 46 mm cutting height and 15 cutting edges provide extended contact length suitable for continuous passes and shallow-step high-feed operations. The balanced geometry reduces vibration and supports stable chip formation; this stabilisation improves surface finish and reduces the likelihood of premature insert wear. The relatively modest mass (approx. 1.12 kg) further helps to limit spindle load and preserve spindle bearings during repetitive cycles. Practical handling and serviceability for workshop efficiency Designed for straightforward maintenance, the indexable concept removes the need for regrinding and enables quick in‑situ replacement of worn tips. The use of standardised APKT inserts means that stocking a small range of grades covers a wide array of routine tasks without complex logistics. The tool’s construction permits rapid inspection and replacement of the small Torx screws, keeping planned maintenance brief. Over time, this approach reduces total tooling cost and keeps machines productive by favouring predictable, fast service intervals rather than lengthy downtime. Where the cutter fits into production routines This indexable-insert milling solution is particularly well suited to workshops and production cells that prioritise predictable cycle times, low inventory complexity and fast recoverability after insert changes. The HF12TM functions as a flexible peripheral cutter in mixed-production contexts where standard inserts such as APKT 1003 are already used, allowing teams to harmonise tooling across machines. Where process planners aim to simplify tool control and ensure consistent clamping and repeatability, this cutter offers a balanced compromise between compact design and useful cutting engagement. For technical advice or stock details on the HF12TM from Teknik Cutting Tools, contact Metav Werkzeuge for precise availability information and application guidance at +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: HF12TM Manufacturer: Teknik Makina Product name: Igelfräser eClass: 21180806 ETIM: EC011860 Facts Diameter: 32 mm Shank/holder diameter: 32 mm Cutting height: 46 mm Overall length: 150 mm Weight: 1.12 kg Cutting edges: 15 Special features Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key size: T08 SKU: HF12TM FAQ Which insert type does this cutter accept? The cutter accepts APKT 1003 indexable inserts; the HF12TM is prepared for this common triangular insert geometry. Which insert brands are compatible with the tool? The HF12TM is compatible with inserts from Korloy and other suppliers offering APKT 1003-format inserts. What are the key dimensions to note for machine setup? Key dimensions are 32 mm diameter, 46 mm cutting height and 150 mm overall length for the HF12TM, which should be checked against spindle and toolholder clearance. How are the inserts secured? Inserts are fastened using M2.5x5.5 Torx screws; the specified key size is T08 for reliable clamping. Is this tool heavyweight for its size? At approximately 1.12 kg, the cutter offers a compact, balanced mass that is appropriate for most toolholders and reduces spindle load. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 25 mm working diameter, eight cutting edges and a 37 mm cutting height that deliver efficient, repeatable material removal; purchase arrangements are available via Metav Werkzeuge and technical consultants can be consulted for application details. Igelfräser HF11TM — Indexable milling cutter, Ø25 mm, 8 cutting edges (Teknik Makina) A versatile Igelfräser HF11TM indexable milling cutter engineered for high‑rate roughing and profile machining with APKT 1003 inserts Ø 25 mm shank for rigid clamping Eight cutting edges for high material removal 37 mm cutting height for deep profiles Compatible with APKT 1003 Korloy inserts Faster cycles through stable geometry and high metal removal The compact design with a 25 mm working diameter and eight cutting edges provides consistently high stock removal while maintaining dimensional stability. The cutter’s geometry reduces vibration and enhances process reliability, which in turn shortens cycle times and raises throughput. This configuration suits operations that prioritise efficiency and repeatability, offering a direct productivity benefit without complex setup changes. Reduced downtime with an indexable insert system Using the APKT 1003 insert family—compatible with Korloy—permits swift insert indexing and predictable wear management. The insert clamping uses M2.5x5.5 Torx screws and a T08 key for secure fastening, making maintenance straightforward and repeatable. Because worn edges are replaced rather than the whole tool, tooling costs are controlled and machine uptime is improved, which supports a lean production environment. Compact, balanced design for workshop flexibility An overall length of 150 mm combined with a tool weight of 0.515 kg yields a well‑balanced cutter that is easy to integrate into standard toolholders and adaptors. The assembly is engineered to deliver stiffness where it matters, so the setup remains reliable even during demanding passes. The indexable concept lowers inventory complexity: stocking a small range of inserts keeps replacement cycles simple and cost‑effective while preserving machining quality. For procurement or application advice on the Teknik Cutting Tools indexable system HF11TM, contact Metav Werkzeuge to discuss suitability for specific setups and to arrange supply: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Article number: HF11TM Brand: Teknik Makina Manufacturer SKU: HF11TM Core specifications Diameter: 25 mm Shank diameter: 25 mm Cutting edges: 8 Cutting height: 37 mm Overall length: 150 mm Weight: 0.515 kg Additional features Compatible inserts: APKT 1003 Fits inserts by: Korloy Torx screw: M2.5x5.5 Torx key: T08 FAQ What insert type does this cutter use? The cutter is designed for APKT 1003 indexable inserts; Korloy inserts are a listed match for this system. How many cutting edges does the tool provide? This indexable milling cutter features eight cutting edges, which supports high material removal rates and smoother engagement. What are the key dimensions to check for holder compatibility? Relevant dimensions are a working and shank diameter of 25 mm and an overall length of 150 mm, which should be checked against the machine spindle and holder envelope. Which fastening hardware is required for insert changes? Insert clamping uses M2.5x5.5 Torx screws tightened with a T08 key; the secure fastening ensures repeatable seating of the inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine economical tooling with reliable indexable compatibility and a compact 20 mm shank for smooth milling cycles; the HF10TM offers six cutting positions and a 150 mm overall length to reduce downtime and tooling costs. Order the cutter via Metav Werkzeuge or consult our specialists for integration advice. Igelfräser HF10TM — Indexable cutter body, 20 mm shank (Teknik Makina) The Igelfräser HF10TM is a compact indexable milling cutter body designed for light to medium machining with APKT 1003 inserts, suitable for use in CNC machining centres and toolrooms For APKT 1003 indexable inserts 20 mm shank diameter for compact setups Six cutting edges for extended tool life 150 mm overall length for reach and stability Precision and productivity in a compact tool body The HF10TM is engineered as a stable indexable cutter body that accepts APKT 1003 inserts, providing a cost-effective alternative to solid tooling. The use of indexable carbide inserts keeps tooling costs controllable: worn edges are simply indexed or replaced, which shortens maintenance intervals and reduces inventory of full-diameter cutters. With a 20 mm shank and a balanced design, the assembly maintains run-out control in compact spindles, supporting repeatable results and steady cycle times. This configuration supports rational decision-making for production planners by linking measurable features—shank size, insert type, and number of cutting edges—to predictable operating behaviour. Secure clamping and straightforward handling for consistent results Clamping and insert retention are deliberately simple: the cutter is supplied with a Torx M2.5x5.5 screw (T08) for reliable fixation of the APKT inserts, reducing the risk of loosening under moderate loads. The six cutting edges arrangement spreads cutting forces and enables multiple indexing operations before replacement, improving throughput per tool. The tool’s cutting height of 28 mm and 150 mm overall length give sufficient engagement for many finishing and semi-finishing passes while keeping the tool overhang moderate. With a mass of 0.326 kg, the body is easy to handle during set-up yet substantial enough to dampen small vibrations in shorter overhang applications. Compatibility, workshop efficiency and supply confidence Delivered as a cutter body compatible with Korloy APKT 1003 inserts, the HF10TM simplifies spare-part logistics for workshops already using that insert family. The modular nature of the system shortens downtime: insert changes are fast, and a stock of APKT inserts covers multiple diameters and grades. The compact 20 mm attachment aids integration into smaller toolholders and machining centres where space is limited. For procurement and ongoing supply, Metav Werkzeuge acts as a local quality filter for European customers, combining availability from Emmerich with technical counselling so that the cutter body can be matched to the correct insert grade and machining strategy. For tailored advice on integrating the HF10TM into existing tool cycles, contact Metav Werkzeuge for product availability and recommended insert grades – phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: HF10TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core figures Diameter: 20 mm Shank diameter: 20 mm Cutting height: 28 mm Overall length: 150 mm Number of cutting edges: 6 Weight: 0.326 kg Torx screw: M2,5x5,5 Torx key size: T08 Special features For indexable inserts APKT 1003 Compatible insert manufacturer: Korloy Indexable cutter body design Compact form factor for small holders FAQ What inserts fit this cutter body? The HF10TM is designed for APKT 1003 indexable inserts; Korloy variants are compatible and commonly used with this cutter body. What is the shank diameter and why does it matter? The cutter has a 20 mm shank, which enables use in compact toolholders and helps maintain rigidity for short to moderate overhangs. How many cutting positions are available before replacement? The body accepts inserts arranged to provide six cutting edges, allowing multiple indexings to extend tool life before full replacement. Is the HF10TM suitable for CNC machining centres? Yes, the HF10TM’s indexable design, 20 mm shank and straightforward clamping make it suitable for integration into CNC machining centres for light to medium milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise indexable cutting and a compact Ø 40 mm body with 18 cutting edges plus a robust 32 mm shank for secure clamping; the design supports fast setup and consistent material removal. Order this solution via Metav Werkzeuge or request application advice from our technical consultants for an optimised integration into production. Hedgehog-style indexable milling cutter HF09TM — Ø 40 mm, 18 flutes, Teknik Makina The Hedgehog-style indexable milling cutter HF09TM is a specialised milling head for efficient peripheral and face milling applications where modular inserts are preferred over solid tools, suitable for industrial CNC and high-repeatability workshop operations. Indexable for APKT 1003 inserts Ø 40 mm cutting diameter 18 cutting edges for smooth stock removal 32 mm shank for secure clamping High productivity through modular design and repeatable results The modular head is engineered to combine the flexibility of indexable inserts with the stability of a solid tool body. Its geometry, featuring 18 cutting edges, delivers continuous chip engagement that reduces cycle interruptions and supports steady material removal rates. The Ø 40 mm working diameter and cutting height 55 mm provide a compact footprint while maintaining effective cutting area, making the tool suitable for series production and smaller batch runs that demand repeatability and short setup intervals. Where changeover times are critical, the insert system minimises downtime and permits on-the-fly tool maintenance. Compatibility and quick changeover for efficient workflows Compatibility with APKT 1003 inserts and acceptance of Korloy-produced plates ensures broad availability of grades and chipbreakers for adapting to different workpiece materials. The 32 mm shank enables secure clamping in common toolholders, limiting runout and improving finish quality. Fast and reliable fixing is supported by the specified fastening hardware (Torx M2.5x5.5, key T08), which streamlines reassembly and reduces the time required for routine servicing. These characteristics are aimed at shops that value straightforward logistics and the ability to swap cutting grades quickly. Cutting performance and application guidance The tool’s multiple-edge configuration is designed to spread cutting forces and heat across several teeth, which can lead to improved surface quality during light to medium depth cuts. The combination of cutter diameter, number of flutes and cutting height 55 mm is particularly well suited to operations where a balance between material removal rate and surface finish is required. For unfamiliar users, selecting insert grade and cutting data according to the workpiece material is the best practice; the modular concept permits optimisation without replacing the whole tool body. Durability, handling and maintenance The body’s dimensions and mass (0.873 kg) strike a balance between rigidity and manageability when fitting or removing the head. Regular inspection of insert seats and correct torqueing of the Torx screw reduces the risk of runout or insert movement. Replacement inserts are indexed quickly and repeatability is maintained when securing inserts with the specified M2.5x5.5 fastening screws and T08 key. Routine checks of clamping surfaces and light cleaning after each shift prolong service life and support consistent machining outcomes. Where the cutter delivers most value The head is intended for production environments and specialist workshops that prefer the cost and logistical advantages of indexable systems. Its combination of a compact Ø 40 mm tool body, multiple cutting edges and a robust 32 mm shank makes it a good match for jobs requiring repeatable results and straightforward tool maintenance. The modular approach reduces inventory complexity while enabling tailored cutting strategies through the choice of APKT 1003 insert grades. Contact Metav Werkzeuge for a specification check and to secure the HF09TM hedge‑style indexable milling cutter for tailored machining tasks Technical Data Article number: HF09TM Manufacturer: Teknik Makina Product name: Hedgehog-style indexable milling cutter HF09TM Facts Diameter: 40 mm Shank diameter: 32 mm Cutting height: 55 mm Overall length: 125 mm Number of cutting edges: 18 Weight: 0.873 kg Special features Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Fastening screw: M2.5x5.5 (Torx) Required key size: T08 Indexable design for reduced downtime FAQ What workpiece materials are suitable for this cutter? The HF09TM hedge‑style indexable milling cutter accepts APKT 1003 inserts and can be adapted to a wide range of materials by selecting the appropriate Korloy insert grade; machining strategy should follow the chosen insert specification. How is the cutter secured in the spindle? The tool body uses a 32 mm shank for clamping; correct holder selection and proper clamping are essential to maintain repeatability when using the HF09TM from Teknik Makina. Which inserts are recommended for finishing applications? For finishing, fine‑grain or polished‑surface APKT 1003 inserts from Korloy are suitable; the HF09TM design allows quick replacement to optimise surface quality without changing the body. What maintenance routines extend tool life? Routine inspection of insert seats, correct torque on the M2.5x5.5 Torx screws and light cleaning after use will keep the HF09TM performing reliably. Is the tool balanced for high‑speed milling? The modular design supports stable running when correctly clamped; balancing should be checked in high‑speed applications and adjusted according to the machine tool manufacturer’s guidance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of rapid material removal and simple insert service: the HF08TM provides a 32 mm cutting diameter with 15 cutting edges and is compatible with APKT 1003 indexable inserts for efficient milling operations. Order or discuss application details directly via Metav Werkzeuge for reliable supply and expert advice. Hedgehog cutter HF08TM — indexable insert milling cutter, Ø 32 mm, APKT 1003 compatible A Hedgehog cutter HF08TM engineered for insert-based milling where compact diameter and multiple cutting edges reduce cycle times in component machining Teknik Makina HF08TM, Ø 32 mm Compatible with APKT 1003 inserts (Korloy) 15 cutting edges for efficient removal Torx fixing M2.5x5.5, key T08 Faster throughput from compact geometry The milling head is designed to convert a modest footprint into substantial material removal. With a 32 mm diameter and 15 cutting edges, the tool reduces the number of passes required on many conventional operations, which translates into shorter cycle times and improved throughput. The use of APKT 1003 indexable inserts means cutting edges can be renewed instantly, keeping setup time low and production steady. Secure insert retention and straightforward servicing Maintenance is simplified by a standard Torx fixing system. The M2.5x5.5 Torx screw and T08 key allow secure clamping of inserts while enabling fast changes during shift breaks. The compact mass (approximately 0.627 kg) keeps spindle load predictable and makes balancing simpler, so downtime for maintenance is limited and repeatability is supported by a robust mechanical interface. Deep cutting capacity in a compact tool The cutter offers a substantial cutting height of 46 mm within an overall length of 120 mm, providing enough engagement for many profiling and face-milling tasks without excessive overhang. This geometry balances stiffness and accessibility: the effective cutting range helps to perform deeper passes where permitted by machining strategy, cutting fewer grooves and reducing time spent on finishing operations. Ready integration with common inserts and tooling systems Designed for indexable insert workflows, the head accepts APKT 1003 inserts and pairs well with Korloy-specified cutters, enabling straightforward procurement of replacement parts. The 32 mm shank diameter is compatible with standard collet and holder systems, which simplifies integration into existing tool assemblies and supports consistent clamping performance across multiple machines. Contact Metav Werkzeuge to discuss HF08TM application suitability, recommended inserts and delivery options — Metav Werkzeuge provides expert guidance and reliable supply from Emmerich. Technical data Article number: HF08TM Manufacturer: Teknik Makina Diameter: 32 mm Cutting edges: 15 Cutting height: 46 mm Overall length: 120 mm Shank diameter (aufnahme): 32 mm Weight: 0.627 kg Compatible insert: APKT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T08 Special features Indexable inserts for rapid edge renewal High cutting-edge count for improved material removal Compact overall length for reduced overhang Standard Torx fixing for simple servicing Suitable for insert-based milling operations FAQ Which inserts fit this cutter? The HF08TM is specified for APKT 1003 indexable inserts; the tool accepts inserts from Korloy as listed and is aligned with common APKT insert geometries. How are the inserts secured and changed? Inserts are clamped with a Torx screw (M2.5x5.5). A T08 key is used for removal and installation, allowing quick, secure service of the cutting edges. Can the head be used in standard toolholders? Yes. The shank (32 mm) matches common collet and holder interfaces, permitting straightforward integration into standard machining setups. What benefits does the high number of cutting edges bring? A larger number of cutting edges spreads wear and increases material removal per revolution, which often reduces the number of tool passes and improves productivity in batch and series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, rigid tool that combines a 25 mm shank with an indexable-insert system and eight cutting edges for stable, efficient milling; order the tool through Metav Werkzeuge or consult the technical team for application advice. Indexable-insert rotary cutter HF07TM — 25 mm shank, 8 cutting edges (Teknik Makina) The indexable-insert rotary cutter HF07TM is a compact milling solution for operations that use APKT 1003 inserts, engineered to deliver consistent chip control and reduced changeover times in production and workshop environments 25 mm shank for secure toolholding Accepts APKT 1003 indexable inserts Eight cutting edges for smooth material removal Stable clamping for accurate, vibration‑reduced machining A rigid 25 mm shank and compact overall length create a stable tool system that reduces deflection during milling. The combination of a short, well‑balanced body and multiple cutting edges means loads are distributed across eight flutes, which improves surface quality and extends insert life. Where process reliability is essential, this configuration supports repeatable results and minimises scrap rates by keeping the cutting geometry consistent throughout the operation. The design promotes steady chip flow and reduced chatter for better finish and dimensional stability. Insert flexibility that keeps production moving Compatibility with APKT 1003 indexable inserts provides flexibility in grade selection and application tuning. Using industry‑standard inserts from suppliers such as Korloy allows quick adaptation to different materials and cutting conditions without replacing the cutter body. The modular approach reduces inventory costs for full‑body cutters and shortens downtime, because worn inserts can be replaced individually. This setup supports both high‑volume repetition and small batch runs where rapid tool changes and consistent results are required. Fast, reliable clamping and serviceability Maintenance and insert exchange are simplified by the proven fastening concept: replacement inserts are secured with M2.5x5.5 Torx screws (Torx key T08). The clear screw specification and standard key size enable rapid, repeatable clamping torque and minimise the risk of incorrect assembly. As a lightweight tool (approx. 0.404 kg) with an overall length of 120 mm, it is easy to handle during setup and inspection while remaining robust enough for routine production use. These features contribute to lower throughput interruptions and predictable maintenance intervals. Practical applications and workflow advantages With a cutting height of 37 mm and a nominal diameter of 25 mm, the cutter suits compact milling operations where space and rigidity matter. The use of indexable inserts makes the system cost‑effective over time, especially for shops that need quick turnaround between jobs. The HF07TM is particularly appropriate where a balance of tool stability, easy serviceability and adaptability to standard insert families is valued. For further technical clarification or to confirm fitment with existing toolholders, the Metav Werkzeuge team provides tailored guidance and specification checks. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina HF07TM and to arrange supply directly from Emmerich — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HF07TM Manufacturer: Teknik Makina Type designation: Indexable-insert rotary cutter Facts Diameter: 25 mm Shank diameter: 25 mm Cutting height: 37 mm Number of cutting edges: 8 Overall length: 120 mm Weight: 0.404 kg Special features Accepts APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M2,5x5,5 Torx key: T08 FAQ Which insert form fits this cutter? The HF07TM accepts APKT 1003 indexable inserts; Korloy‑type APKT inserts are compatible. What is the shank diameter and why does it matter? The shank diameter is 25 mm, providing a rigid connection to the holder and reducing deflection during milling. How many cutting edges does the cutter have and what is the benefit? The tool has eight cutting edges, which spreads cutting forces and improves surface finish while extending insert life. What fastening hardware is required for insert replacement? Insert clamping uses M2.5x5.5 Torx screws and a T08 Torx key for secure, repeatable clamping. Is the HF07TM suitable for compact machining setups? Yes — with an overall length of 120 mm and a compact diameter, the cutter is designed for situations where stability and reduced overhang are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, indexable-insert system that combines repeatable accuracy with fast insert changes; the robust 20 mm shank and six cutting edges ensure stable material removal for reliable production. Order directly via Metav Werkzeuge or consult their specialists for application advice. HF06TM Rotary Cutter – indexable-insert cutter with 20 mm shank and six cutting edges (Teknik Makina) The HF06TM rotary cutter is a compact, CNC-capable tool designed for indexable APKT 1003 inserts and general face or profile milling in industrial workshops 20 mm shank for stable clamping Accepts APKT 1003 indexable inserts Six cutting edges for smooth material removal Stable clamping for consistent machining results The compact design centres on a 20 mm shank, which provides high torsional stiffness and reduces runout compared with smaller shanks. This stability translates into repeatable machining tolerances and extended insert life, so production runs remain consistent from the first part to the last. Suitable for constrained set-ups, the robust shank diameter also simplifies toolholding logistics on standard collet or chuck systems. Efficient material removal with an indexable system Equipped for APKT 1003 indexable inserts and compatible with Korloy grades, this cutter delivers efficient cutting with predictable chip control. The arrangement of the six cutting edges and a 28 mm cutting height allows steady material removal while keeping cutting forces balanced. For workshops moving from solid-tool strategies to indexable systems, the result is lower machining costs per part and quicker on-machine insert changes. Compact overall length for flexible mounting With a 120 mm overall length and a nominal diameter of 20 mm, the tool is designed to fit tight work envelopes without sacrificing reach. The low weight (0.265 kg) contributes to reduced spindle load and minimises unwanted vibration at higher spindle speeds. This compact footprint makes the cutter a practical choice for busy CNC centres where accessibility and rigidity are equally important. Practical handling and maintenance on the shop floor Insert changes and clamping maintenance are straightforward: the cutter uses an M2.5×5.5 Torx screw and a T08 key for secure, repeatable fastening of the inserts. Clear access to the fixing screw shortens tool change time and reduces downtime. For users unfamiliar with indexable insert geometry, the system offers predictable seating and orientation, ensuring correct rake and clearance without specialist adjustments. For a tailored recommendation on the Teknik Cutting Tools HF06TM rotary cutter and quick supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability for the intended application and lead times Technical data Article number: HF06TM Manufacturer: Teknik Makina Diameter: 20 mm Shank diameter (D): 20 mm Cutting edges: 6 Cutting height: 28 mm Overall length: 120 mm Weight: 0.265 kg Accepts insert type: APKT 1003 Compatible insert manufacturer: Korloy Fixing screw: M2.5×5.5 Torx Torx key size: T08 FAQ What insert type does this cutter use? The cutter accepts APKT 1003 indexable inserts; this makes insert sourcing straightforward and compatible with Korloy grades. Is the shank suitable for standard collet systems? Yes, the 20 mm shank diameter is compatible with common collet and chuck toolholding systems for stable clamping. How many cutting edges are fitted and what is the cutting height? The tool has six cutting edges and a cutting height of 28 mm, designed for balanced material removal. Can the HF06TM be used for both face and profile milling? The cutter’s geometry and insert type make it well suited to both face and profile milling tasks in general machining. What is required for insert fastening and replacement? Insert fastening uses an M2.5×5.5 Torx screw and a T08 key for secure, repeatable changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust turning solution with a 90° cutting angle, compatibility with APKT 1003 indexable inserts and a sturdy 27 mm shank for stable toolholding; order or discuss tooling requirements directly via Metav Werkzeuge for reliable supply and expert advice. Eckmesserkopf T179TM — 90° corner turning head for APKT 1003 inserts by Teknik Makina The Eckmesserkopf T179TM is a compact corner turning head designed for precision external turning and profiling using APKT 1003 indexable inserts, suitable for workshop and production environments 90° cutting angle for precise profiling Compatible with APKT 1003 indexable inserts Fits Korloy APKT 1003 insert geometry 27 mm shank with 80 mm head diameter Engineered rigidity for consistent turning results Built with a focus on stability, the head’s Ø 80 mm diameter and 27 mm shank deliver a rigid connection to the toolpost, reducing vibration and supporting repeatable part geometry. The 90° cutting angle provides predictable engagement for external profiling and square shoulder operations, enabling consistent surface finish and dimensional control. The stated weight of 1.205 kg contributes to mass damping without excessive tool overhang, which helps maintain concentricity and prolong insert life. Fast, secure insert changes minimise downtime Maintenance and index changes are simplified thanks to compatibility with APKT 1003 indexable inserts and a straightforward fastening system. The insert is secured with an M2.5x5.5 Torx screw operated by a T8 key, which allows quick tightening and reliable clamping force for repeatable seating. The Eckmesserkopf T179TM from Teknik Makina supports efficient shopfloor routines: reduced set‑up time and fast insert exchange mean less idle machine time and higher productivity per shift. Practical dimensions and simplified inventory management The head’s 50 mm overall length and compact profile make it suitable for confined setups and multi‑operation fixtures, while the availability for Korloy APKT 1003 inserts reduces the need for specialised spare stocks. With eight cutting edges the configuration supports indexed tool life extension when combined with multi‑edge inserts, and the standardised interface facilitates integration into existing toolholder systems. Clear, measurable data such as shank diameter and head Ø simplify purchasing decisions and ensure interchangeability across compatible toolholders. Contact Metav Werkzeuge for tailored application advice and delivery options for Teknik Makina tooling: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T179TM Manufacturer: Teknik Makina Designation: Eckmesserkopf for APXT 1003 Indexable Inserts Facts Weight: 1.205 kg Head diameter: 80 mm Shank diameter: 27 mm Overall length: 50 mm Cutting angle: 90° Number of cutting edges: 8 Special features Compatible inserts: APKT 1003 Compatible insert brand: Korloy Torx screw: M2.5x5.5 Torx key size: T8 FAQ Which insert type fits this turning head? The Eckmesserkopf T179TM is designed for APKT 1003 indexable inserts; Korloy APKT 1003 geometry is explicitly compatible. How is the insert fastened to the head? Insertion is secured with an M2.5x5.5 Torx screw, tightened using a T8 Torx key for consistent clamping. What are the key dimensions to check for mounting? Relevant dimensions are head Ø 80 mm, shank 27 mm and overall length 50 mm; weight is 1.205 kg. Is the head suitable for 90° profiling and shoulder turning? Yes, the integrated 90° cutting angle is configured for precise profiling and square shoulder operations. Can other insert brands be used with the same geometry? The head accepts inserts matching the APKT 1003 geometry; brands that adhere to that ISO form, such as Korloy, will be compatible. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact 90° corner turning solution that combines repeatable accuracy with rapid insert changes; the robust 22 mm shank ensures stable clamping and reduced vibration for cleaner cuts. Order the Eckmesserkopf directly via Metav Werkzeuge or contact our consultants for specification support. Eckmesserkopf T178TM — Corner turning head for APXT 1003 indexable inserts, 90° cutting angle (Teknik Makina) The Eckmesserkopf T178TM is a purpose-built corner turning head engineered for precise external turning and profiling using APKT/APXT 1003 indexable inserts in standard turning stations. 90° cutting angle for precise corner turning Compatible with APKT 1003 / APXT 1003 inserts 22 mm shank diameter for stable clamping Torx M2.5 fastening; T8 key for quick assembly Consistent corner accuracy for repeatable parts The 90° cutting geometry delivers a defined cutting datum that simplifies setup and reduces machining variation. With a clear 90° cutting angle, the tool head produces reproducible corner radii and shoulder faces, which supports tighter tolerances and less post-process rework. The controlled geometry is especially beneficial in batch production where consistent part-to-part accuracy reduces scrap rates and improves downstream assembly quality. Robust clamping and rapid insert changes to cut downtime Designed with a 22 mm shank for secure mounting and a Torx fastening system, the head uses a Torx M2.5 screw tightened with a T8 key to hold the insert firmly. This combination provides stable clamping that minimises vibration and tool deflection, improving surface finish and tool life. The compatibility with APKT 1003 / APXT 1003 insert formats means insert replacement is swift and standardised, turning maintenance windows into brief service intervals and supporting a more efficient production rhythm. Compact dimensions that integrate easily into workshop setups With a 63 mm diameter, overall length 40 mm and a mass of 0.543 kg, the turning head balances rigidity with a compact footprint for tighter toolpost arrangements. The moderate weight and compact size ease handling during tool changes and reduce cantilever loads on the turret, helping to preserve machine accuracy. Compatible with Korloy insert geometries, the tool head integrates with common indexable insert portfolios, allowing workshop standardisation and simplified stocking of spare parts. For reliable corner turning with Teknik Cutting Tools components, contact Metav Werkzeuge for personalised technical advice and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T178TM Manufacturer: Teknik Makina Product name: Eckmesserkopf For inserts: for APXT 1003 Indexable Inserts Key measurements Diameter: 63 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.543 kg Cutting angle: 90° Cutting edges: 7 Features & compatibility Compatible with APKT 1003 indexable inserts Suitable for Korloy insert geometries Torx screw M2.5x5.5; Torx key T8 90° corner turning head design FAQ Which indexable inserts fit this turning head? The Eckmesserkopf T178TM is designed for APKT 1003 / APXT 1003 insert formats and is compatible with Korloy geometries that follow the same seat and dimension standards. What fastening hardware is required for assembly? Assembly uses a Torx M2.5x5.5 screw, which is tightened with a T8 key to secure the insert in the seat. What are the main dimensions to consider for turret planning? Key values: diameter 63 mm, overall length 40 mm and shank diameter 22 mm; the head weight is 0.543 kg, useful for assessing cantilever effects. For which machining tasks is this head suitable? The head is intended for 90° corner turning and external profiling where a defined shoulder or corner is required, offering repeatable geometry for series production. Can inserts from other manufacturers be used? Inserts that conform to the APKT 1003 / APXT 1003 geometry and seating will be compatible; check the insert seat dimensions and manufacturer recommendations before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise geometry and secure clamping: the corner tool head ensures consistently square shoulders thanks to its 90° cutting angle and firm retention via the Torx M2.5×5.5 screw; compatibility with standard APKT 1003 indexable inserts keeps tooling flows simple and cost-effective. Order directly via Metav Werkzeuge or consult the Metav specialists for application matching. Eckmesserkopf T177TM — Corner tool head with 90° cutting angle for APKT 1003 indexable inserts (Teknik Makina) Eckmesserkopf T177TM is a compact corner cutting head designed for shoulder and face-turning operations with indexable inserts, offering a sturdy 22 mm shank and secure Torx clamping for industrial turning applications. 90° cutting angle for precise shoulder turning Compatible with APKT 1003 indexable inserts 22 mm toolholder shank diameter, robust fit Torx M2.5×5.5 screw with T8 key for secure clamping Consistent square shoulders and reliable cycle times The head’s defining geometry provides a 90° cutting angle, which produces exact right-angled shoulders without additional setup work; this reduces secondary operations and shortens cycle times. Thanks to the rigid 22 mm shank and a compact overall length, the toolholder delivers improved stability in the bore of a turret or live tool, so vibrations are minimised and insert life is extended. Such mechanical stability translates into fewer interruptions and a more predictable production rhythm. Simple integration with industry-standard inserts and holders Designed for use with APKT 1003 indexable inserts from mainstream manufacturers such as Korloy, the tool head fits established insert routines and inventory lists. The unit’s retention system is built around a Torx M2.5×5.5 screw operated with a T8 driver, enabling fast, repeatable insert changes and secure clamping without exotic tooling. For workshops seeking to harmonise tooling across multiple lathes, this compatibility reduces the need for specialised inserts and simplifies procurement and logistics. Compact dimensions for versatile machining positions With a 50 mm diameter, an overall length of 40 mm and a weight of 0.398 kg, the head is compact yet substantial enough for heavy engagement when indexable inserts are used for turning and facing. The relatively short projection supports close-in work and reduces overhang, which benefits finish quality and dimensional control. Fewer passes are required to reach tolerance, producing a net gain in throughput and a reduction in tool costs over time. Order the T177TM corner tool head via Metav Werkzeuge for matched tooling supply and expert application advice, or request assistance from the Metav team to confirm suitability for your turning centres Technical data Article number: T177TM Designation: Eckmesserkopf Manufacturer: Teknik Makina Weight: 0.398 kg Facts Diameter: 50 mm Overall length: 40 mm Shank diameter (mount): 22 mm Cutting angle: 90° Number of cutting edges: 6 Special features Torx screw: M2.5×5.5 Torx key size: T8 Suitable for indexable inserts: APKT 1003 Compatible insert manufacturer: Korloy FAQ Which inserts fit this corner tool head? The corner tool head T177TM is specified for use with APKT 1003 indexable inserts; inserts from Korloy in that designation series are compatible. What clamping hardware is required for insert changes? Insert retention on the T177TM is secured with a Torx M2.5×5.5 screw and requires a T8 key for tightening and release. Can this head be mounted in standard toolholders? The head has a 22 mm shank diameter suitable for holders that accept a 22 mm mount; check turret or toolpost compatibility before installation. Is the tool head suitable for close-in shoulder work? Yes — the compact 50 mm diameter and 40 mm overall length make the unit well suited to close-in shoulder and face turning with reduced overhang. How does the geometry affect cutting stability? The 90° cutting angle produces square shoulders and, combined with the robust shank and secure clamping, reduces vibration for improved finish and extended insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑rigidity tool head that delivers precise 90° shoulder milling and fast insert changes; the combination of a 16 mm shank, ø40 mm head and compatibility with APKT 1003 indexable inserts ensures stable cuts and consistent cycle times. Order via Metav Werkzeuge or consult product specialists for application-specific advice. Corner milling head – 90° head for APKT 1003 indexable inserts (Teknik Cutting Tools) The corner milling head is a 90° indexable tool head designed for precise shoulder and face milling with APKT 1003 inserts, suitable for compact toolholders and stiff machine setups. 90° cutting angle for precise shoulder milling Fits APKT 1003 indexable inserts by Korloy 16 mm shank, ø40 mm head for compact setups Secured with M2.5×5.5 Torx screw (T8) Consistent shoulder accuracy with minimal runout The compact indexable tool head has been engineered for repeatable shoulder and face milling, where a true 90° geometry reduces secondary operations. The combination of a 16 mm shank and a ø40 mm head delivers high rigidity, so cutting forces are transmitted cleanly into the holder and machine spindle. This stability translates into improved surface quality and dimensional adherence, lowering rework rates and keeping cycle times stable across batch runs. Familiar machining terminology is used throughout so decision making is straightforward for production planners and operators. Quick insert changes and reliable clamping minimise downtime Compatibility with APKT 1003 indexable inserts from Korloy supports familiar tooling standards and simplifies inventory management. The insert is secured by an M2.5×5.5 Torx screw and fitted using a T8 key, providing a dependable clamping method that avoids accidental loosening under heavy feed. Fewer and faster insert changes mean shorter tool‑change intervals on the shop floor and higher machine availability. Technical queries and requests for additional data are handled through Metav Werkzeuge’s consultancy services to support integration into existing tool setups. Compact footprint for versatile machine application With an overall length of 40 mm and a head diameter of 40 mm, the head’s compact form factor suits confined tool magazines and close‑quarter toolholders without compromising stiffness. The nominal mass of 0.277 kg balances inertial forces while remaining light enough for quick handling during setup. Designed for industrial use, the head supports practical shop workflows and is compatible with common indexable insert geometries, helping to rationalise tooling across milling operations and reduce supplier complexity. Contact Metav Werkzeuge for application recommendations, stock status and tailored advice on integrating the Teknik Cutting Tools corner milling head T176TM into existing machining centres Technical data Article number: T176TM Designation: Corner milling head for APKT 1003 indexable inserts Brand: Teknik Cutting Tools (Teknik Makina) Facts Shank diameter: 16 mm Head diameter: 40 mm Overall length: 40 mm Weight: 0.277 kg Cutting angle: 90° Cutting edges: 5 Special features Compatible with APKT 1003 indexable inserts (Korloy) Secured with M2.5×5.5 Torx screw; Torx key T8 Compact design for confined toolholders FAQ Which inserts fit the tool head? The head accepts APKT 1003 indexable inserts; compatibility is confirmed for Korloy inserts designed to that designation. What mounting shank is required? A 16 mm shank holder is required; the head was manufactured for use with 16 mm toolholders and compact setups. How is the insert fixed to the head? The insert is clamped using an M2.5×5.5 Torx screw and tightened with a T8 key for secure retention during milling. Is the head suitable for heavy roughing operations? The compact geometry and high rigidity make the head well suited to common shoulder and face milling tasks; selection should be matched to machine power and feed rates for optimal life. What are the key dimensions to check before ordering? Verify the 16 mm shank, ø40 mm head, and overall length 40 mm against the machine’s toolholder envelope and magazine capacity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com