Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° Horizontal Clamp Zinc-Plated Quick-Action Lever Clamp, 4.5 kN Thrust 5 kN Hold - Kukamet
Take advantage of the combination of robust holding capacity and corrosion-resistant galvanised construction for secure, repeatable clamping in production and assembly environments. Order the clamp directly via Metav Werkzeuge or consult our specialists for installation guidance. Kukamet Horizontal Toggle Clamp 133 — galvanised, 90° angle base The Kukamet Horizontal Toggle Clamp 133 is a horizontal lever clamp designed to lock workpieces at a fixed right angle for assembly, welding and general fixture applications Galvanised steel finish 90° angle mounting base M12x80 pressure spindle Holding force 5,000 N Reliable, measurable clamping performance for production use The unit delivers a clamping force 4,500 N and a holding force 5,000 N, providing mechanically predictable restraint for repeat operations. These rated forces mean fixtures remain stable during light to medium machining, welding and assembly tasks, reducing rework and improving cycle time. The toggle mechanism converts short lever travel into high clamp pressure, which supports quick clamping cycles and consistent part positioning in jigs and tooling. Corrosion resistance that extends service life in workshop settings A galvanised surface finish protects the clamp against moisture and workshop contaminants, so the component maintains functional integrity in humid or exposed environments. The corrosion-resistant coating reduces the need for frequent replacement and helps preserve the clamping geometry over time. Built from robust materials and finished for durability, this clamp supports a maintenance-friendly approach to fixturing where longevity and reliability matter. Compact mounting and fine adjustment for precise set-up Engineered with a right-angle angle base for secure mounting at 90°, this lever clamp integrates into fixtures with minimal modification. The M12x80 pressure spindle allows fine adjustment of the contact point to match workpiece height and compensate for wear, while the unit's low mass of 1.191 kg minimises additional load on fixtures. The compact footprint and repeatable toggle action support efficient workflow and straightforward replacement within modular clamping systems. Discuss mounting options and batch availability with Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering assistance Technical Data Article number: 133-5 GTIN: 8680731504910 Material: galvanised steel Mounting: angle base Pressure spindle: M12x80 Weight: 1.191 kg Facts Clamping force max: 4,500 N Holding force max: 5,000 N Angle: 90° Weight: 1.191 kg Special features Surface: galvanised Mounting type: angle base Special feature: none Classification: eClass 21041719, ETIM EC011973 FAQ What maximum clamping and holding forces does this clamp provide? The horizontal toggle clamp offers a clamping force of 4,500 N and a holding force of 5,000 N, values that support reliable restraint in many assembly and light machining tasks. Can this clamp be mounted at a right angle to a fixture? Yes — the clamp features an integrated angle base for 90° mounting, making it suitable for fixtures that require perpendicular clamping positions. Is the contact point adjustable to accommodate different workpiece heights? Adjustment is possible via the M12x80 pressure spindle, which permits fine tuning of the contact point for precise contact pressure and wear compensation. Is the finish suitable for humid or workshop environments? The galvanised finish provides corrosion resistance for extended service life in typical workshop and production settings. What is the unit weight and how does that affect fixture design? The clamp weighs 1.191 kg; its compact mass reduces added load on modular fixtures and simplifies replacement without major rebalancing Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 1,000 N Clamping Force, Stainless Steel, Wafer Mount - Kukamet
The combination of stainless steel construction, a max. clamping force of 1,000 N, and a compact horizontal foot provides reliable, repeatable clamping for light assembly and fixture work; secure supply and expert advice are available from Metav Werkzeuge if further guidance is required. 111 Horizontal toggle clamp by Kukamet — stainless steel, 1,000 N clamping force The 111 horizontal toggle clamp is a compact horizontal-foot clamp designed for repeatable workpiece securing in light assembly, jigs and fixture applications. Stainless steel construction Max clamping force 1,000 N Holding force up to 1,200 N Horizontal foot with 90° locking angle Consistent clamping for repeatable production quality The robust toggle mechanism delivers a consistent clamping force, rated at 1,000 N, which converts into steady workholding and fewer positional shifts during processing. This repeatable performance reduces rework and supports predictable cycle times on assembly lines or manual fixtures. Where parts must remain stationary during measurement or secondary operations, the reliable holding capability, specified at 1,200 N, ensures that components stay in place without additional bracing. Durable materials to minimise maintenance intervals Constructed from stainless steel, the clamp is resistant to corrosion in typical workshop environments and requires less frequent replacement than untreated parts. The compact design and low mass (approx. 0.225 kg) limit inertia and wear on mounting points, while the M6x40 spindle provides an accessible clamp spindle thread for straightforward adjustment or replacement. These material choices contribute to lower total cost of ownership through reduced downtime and maintenance needs. Easy integration into fixtures and jigs The horizontal foot format with a 90° locking angle allows direct mounting on flat surfaces and simple incorporation into bespoke jigs or production fixtures. Its compact footprint and toggle-style actuation suit repetitive manual clamping as well as semi-automated stations where space is limited. The stainless construction and standard spindle thread permit standardised replacement parts and predictable assembly procedures, supporting efficient workshop workflows. For enquiries about Kukamet clamps and tailored fixture solutions, contact Metav Werkzeuge for local availability and technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: S111-2 GTIN: 8680731503937 Manufacturer: Kukamet Material: Stainless steel Weight: 0.225 kg Core data Max. clamping force: 1,000 N Max. holding force: 1,200 N Spindle: M6x40 Locking angle: 90° Special features Horizontal foot mounting Toggle clamp design No additional special features specified Compact, lightweight construction FAQ What clamping performance can be expected from this horizontal clamp? The 111 horizontal toggle clamp provides a maximum clamping force of 1,000 N and a holding force of up to 1,200 N, suitable for secure workholding in light assembly and jig applications. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the stainless steel construction of the Kukamet clamp enhances corrosion resistance and lowers the need for protective maintenance in standard workshop conditions. How is the clamp mounted and what orientation is intended? The clamp is supplied with a horizontal foot for mounting on flat surfaces and is designed for horizontal locking at a 90° angle for repeatable fixture integration. Can the spindle be adjusted or replaced if required? The clamp uses an M6x40 spindle, which allows straightforward adjustment and replacement using common workshop hardware. Which applications are typical for this type of toggle clamp? The toggle format and compact footprint make the clamp appropriate for jigs, fixtures, light assembly tasks and other situations requiring repeatable manual or semi-automated clamping. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 160mm Arm, 1,000N Press Force, Massive Holding Arm With Safety Lock - Kukamet
Take advantage of secure, repeatable clamping provided by a massive holding arm, safety locking mechanism and a compact angle-foot mount to streamline jig assembly and short-run production. Order the clamp directly via Metav Werkzeuge or consult Metav’s specialists for integration advice. Horizontal toggle clamp 113 — compact 160 mm lever, safety lock Horizontal toggle clamp 113 is a horizontal workholding clamp designed for secure fixture applications where consistent clamping force and space-saving mounting are required Massive holding arm with safety lock 90° angle foot mounting Holding force up to 1,200 N 160 mm lever arm length Consistent, measurable clamping for repeatable processes The clamp delivers reliable holding force with a maximum rated 1,200 N, ensuring stable fixation for repetitive operations. The robust lever-arm design and clearly defined clamping force make it suitable for short runs and jig-based production where process stability is essential. The mechanical locking feature reduces the risk of inadvertent release during handling, which supports reproducible cycle times and lowers rework rates. Space-efficient mounting with secure connection An angle foot mounting enables installation in confined fixture layouts and allows the clamp to be fastened at a 90° orientation for compact toolroom arrangements. The 160 mm lever provides sufficient reach while keeping the overall footprint small, so the component presentation on the fixture remains unobstructed. The blackened finish enhances surface durability and reduces light reflection in assembly cells, contributing to safer and neater workstations. Durability and safety designed into the tool Constructed with a massive holding arm and a positive safety locking mechanism, the device combines mechanical strength with operator protection. The blackened surface treatment offers corrosion resistance in standard workshop environments and supports long service life under regular use. Where ergonomic handling and straightforward locking are priorities, the clamp’s mechanical simplicity reduces maintenance complexity and improves uptime. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal toggle clamp 113 into fixtures and jigs — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: B113-2-D-L-C3 E-class: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Lever arm length: 160 mm Holding force: 1,200 N Clamping force: 1,000 N Weight: 0.27 kg Clamp angle: 90° Special features Mounting: Angle foot Massive holding arm Safety locking mechanism Finish: blackened Category: Spanner FAQ What materials can this clamp be used with? The Kukamet Horizontal toggle clamp 113 is a mechanical workholding device suitable for a wide range of fixture-mounted parts; material compatibility depends on the fixture design and contact points rather than the clamp itself How is the clamp secured to a jig or base plate? Securing is achieved via the angle-foot mounting; the Horizontal toggle clamp 113 is fastened through the foot at 90° for compact installation and predictable alignment Does the clamp offer a positive lock to prevent accidental release? Yes, the clamp incorporates a safety locking mechanism that secures the lever in the clamped position, preventing unintended opening during handling Is the specified holding force guaranteed during production use? The holding force rating (1,200 N) for the Kukamet clamp is a design value; actual clamping performance depends on correct installation, fixture geometry and contact-pad condition What maintenance is recommended to ensure service life? Regular inspection of the pivot points and locking mechanism on the Kukamet clamp, occasional lubrication of moving joints and protection of the blackened finish from aggressive chemicals will support reliable service Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 2.3 kN Closing Force, 2.5 kN Holding Force, Blackened Steel - Kukamet
Combining a 2,500 N holding capacity with a 2,300 N clamping force and a compact 0.42 kg body, this clamp delivers secure, repeatable fixture retention while keeping set-ups light and manageable. Order the Kukamet Horizontal clamp 113 directly via Metav Werkzeuge or request application advice from our specialists. Horizontal clamp 113 — Kukamet horizontal lever clamp with 2,500 N holding force and right-angle foot The Horizontal clamp 113 is a compact right-angle lever clamp engineered for dependable workholding in jigs, fixtures and production benches where space efficiency and repeatable clamping matter Holding force up to 2,500 N Clamping force 2,300 N Right-angle foot mounting Blackened finish for surface protection Reliable clamping that improves cycle stability Designed for repetitive production tasks, this lever-style horizontal clamp provides a measurable holding force of up to 2,500 N and a clamping force of 2,300 N. Those figures translate directly into more consistent part retention and fewer rejects during machining, assembly or inspection. The compact design reduces mass in moving fixtures, helping to maintain cycle times; the relatively low unit weight also simplifies manual handling when configuring small to medium-sized jigs. Space-saving mounting for versatile fixtures Equipped with a right-angle foot, the clamp integrates cleanly into corner fixtures or machine tables without extending the clamping lever into obstructive areas. The M8x50 pressure spindle provides a standardised interface for contact elements and can be paired with existing fixture hardware, enabling rapid retrofitting. For engineers and technicians, this means shorter set-up time and straightforward incorporation into modular clamping systems, supporting efficient changeovers on the shop floor. Durable finish and user-oriented handling The component is supplied with a blackened finish, offering improved surface protection and a professional appearance that endures everyday workshop conditions. At 0.42 kg, the unit combines robustness with a compact weight, making it easy to position and align during assembly. The simple lever mechanism requires minimal maintenance; periodic inspection and light lubrication are sufficient to ensure long service life, reducing planned downtime and maintenance cost in production environments. Suitable applications and workshop benefits This horizontal lever clamp is suitable for general workholding tasks in metalworking and fabrication fixtures, assembly jigs and inspection setups. The fixed 90° clamping angle is ideal where lateral access is limited and a firm hold is required without complex mounting. Used as part of a clamping strategy, it contributes to process reliability and operator confidence: fewer re-clamps, more stable machining and consistent outcomes across production runs. For robust right-angle clamping, request the Kukamet Horizontal clamp 113 via Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for availability and technical advice. Technical Data Article number: B113-3 GTIN: 8680731507447 Manufacturer: Kukamet Designation: Horizontal clamp 113 ETIM: EC011973 ECLASS: 21041719 Facts Holding force: 2,500 N Clamping (pressing) force: 2,300 N Weight: 0.42 kg Clamping angle: 90° Pressure spindle: M8x50 Special features Mounting type: Right-angle foot Finish: Blackened finish Category: Spanner Story trigger: lever clamp FAQ What materials is this clamp intended for in workshop fixtures? The Kukamet Horizontal clamp 113 is designed for general fixture workholding and is suitable as a mechanical clamping element in jigs and fixtures used for metalworking and assembly processes. How is the unit mounted and aligned in a fixture? Mounting is via the right-angle foot; the 90° orientation allows secure attachment at fixture corners or bases, and the M8x50 pressure spindle accepts common contact elements for alignment. What forces can be expected during operation? Rated values for the clamp are 2,300 N clamping force and 2,500 N holding capacity, giving a clear indication of the mechanical performance that can be relied upon in production settings. Does the surface finish require special care? The blackened finish offers basic surface protection; routine cleaning and occasional light lubrication of the moving parts are sufficient to maintain reliable function. Which SKU should be referenced when ordering or specifying? Refer to SKU B113-3 when specifying or ordering the Kukamet Horizontal clamp 113 to ensure the correct item is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 2.3 kN Closing Force, Zinc Plated, Vertical Foot Mount - Kukamet
Take advantage of a compact, galvanised lever clamp that combines reliable clamping force (2,300 N) with a high holding force (2,500 N) for consistent fixture security; order directly via Metav Werkzeuge or request advice from our consultants if clarification is needed. Horizontal clamp 112 — Kukamet, galvanised lever clamp with M8x50 spindle and 90° lock The Horizontal clamp 112 is a robust lever clamp for workshop and production fixtures, designed for repeatable horizontal clamping in jigs and assembly stations Galvanised steel construction Clamping force up to 2,300 N Holding force up to 2,500 N 90° locking angle Faster, more reliable clamping for repetitive production The galvanised lever design delivers a consistent clamping force that reduces process variability and minimises rework. With a maximum clamping force of 2,300 N and a maximum holding force of 2,500 N, this small fixture provides secure seating for parts during machining, assembly or inspection. The corrosion-resistant galvanised finish extends service life in workshop environments, lowering replacement frequency and supporting a continuous production flow. By converting clamping parameters into repeatable results, the clamp supports lean workflows and predictable cycle times. Compact mounting and clear mechanical adjustment A vertical-foot mounting arrangement enables straightforward attachment to fixturing plates and bases, keeping the clamp footprint minimal while preserving stability. The integrated M8x50 spindle provides an easily adjustable contact point, allowing fine tuning of clamp engagement without complex tools. The lever locks at a 90° angle to indicate secure engagement and to save space when the clamp is open. Because the unit weighs only 0.34 kg, it is simple to handle during fixture setup and can be positioned in tight assemblies where a larger device would not fit. Practical fit for workshops and small series production Designed as a dependable component for fixtures, the clamp suits general workshop use, jigs, and small-batch production where durable, repeatable clamping is required. The simple mechanical construction keeps maintenance straightforward and spare-part variety low, which supports predictable uptime and easy stock-keeping. Sourcing through Metav ensures reliable supply from Emmerich and benefits from an established distribution channel that puts precision within reach of workshops and trade customers. For tailored advice on integrating the galvanised Kukamet horizontal clamp into existing fixtures, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for secure supply and expert guidance Technical data Article number: 112-3 GTIN: 8680731500486 Brand: Kukamet Facts Clamping force max: 2,300 N Holding force max: 2,500 N Weight: 0.34 kg Angle: 90° Spindle: M8x50 Special features Material: galvanised Mounting: vertical foot Category: Clamp SKU: 112-3 FAQ Is the clamp suitable for use in humid workshop environments? The Horizontal clamp 112 features a galvanised finish that improves corrosion resistance, making the Kukamet clamp appropriate for typical workshop conditions where moisture is present. Can the spindle length be adjusted for different workpiece heights? Yes, the clamp’s M8x50 spindle allows mechanical adjustment of the contact point so the clamp can be set to suit varying part heights and fixture clearances. What does the 90° locking angle mean for fixture design? A 90° locking angle ensures a clear, compact locked position; the horizontal clamp 112 secures parts without encroaching on adjacent workspace when engaged. Is the clamp suitable for automated production cells? The clamp’s robust mechanical locking and repeatable forces make the Kukamet horizontal clamp 112 a practical choice for jigs and fixtures in semi-automated or manual production; full automation integration depends on the cell’s specific handling interfaces. How heavy is the unit and does that affect fixture loading? At 0.34 kg the clamp is lightweight, simplifying fixture handling and reducing additional load on tooling plates while maintaining the specified clamping and holding forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 3.5 kN Clamping Force, Safety Lock, Blackened Finish - Kukamet
Benefit from robust clamping with a 3,650 N holding force, compact mounting and an integrated safety lock for secure, repeatable setups; order the device via Metav Werkzeuge or consult our specialists for application guidance. Horizontal toggle clamp 111 — Horizontal clamp with 3,650 N holding force and safety lock (Kukamet) The Horizontal toggle clamp 111 provides secure horizontal clamping for jigs, fixtures and assembly work in workshops and light industrial environments. 3,650 N maximum holding force Integrated safety locking mechanism Horizontal base mounting for fixtures M10x70 pressure spindle, 90° clamping angle Secure, repeatable clamping that protects production flow The clamp delivers a 3,650 N holding force that ensures workpieces remain fixed during machining and assembly, reducing rework and cycle interruptions. The built-in safety lock prevents accidental release during handling and vibration, increasing process safety and operator confidence. Where repeatability matters, the mechanical locking action provides consistent positioning without electrical controls, contributing to a predictable setup time and fewer stoppages. Compact mounting and easy adjustment for fast fixture integration Designed for horizontal mounting with a horizontal base, the unit weighs 0.81 kg, allowing quick attachment to fixtures and jigs without substantial counterweighting. The M10x70 pressure spindle enables fine adjustment of clamp travel and contact pressure, so clamping force can be adapted to varying workpiece profiles. The black oxide finish offers a degree of corrosion resistance while maintaining a low-reflectivity surface suitable for workshop environments. Practical choice for workshop and light-industry fixtures This toggle clamp suits repeated clamping tasks in small-series production, assembly benches and test fixtures; its 90° clamping angle provides a compact footprint and clear access to the clamped area. The mechanical simplicity supports low-maintenance operation and straightforward replacement in modular fixtures. Technical documentation and a product image are available for verification of dimensions and mounting details prior to integration. Purchase through Metav Werkzeuge for reliable delivery and application advice — our specialists will assist with selection and mounting recommendations for the Kukamet Horizontal toggle clamp 111 (SKU B111-4-L) Technical data Article number: B111-4-L Model designation: 111 GTIN: 8680731507065 Manufacturer: Kukamet Numbers / Core technical data Max. clamping force: 3,500 N Max. holding force: 3,650 N Clamping angle: 90° Weight: 0.81 kg Pressure spindle: M10x70 Design / Special features Horizontal base mounting Safety locking mechanism Black oxide finish Toggle clamp category SKU: B111-4-L FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 3,650 N, ensuring secure retention of workpieces during machining and assembly. Can the clamping pressure be adjusted? Yes, the M10x70 pressure spindle allows manual adjustment of contact height and clamping pressure to suit different workpiece thicknesses. How is the clamp mounted to a fixture? Mounting is via a horizontal base; the design is intended for secure attachment to jigs, fixtures and assembly benches. Is there a safety mechanism to prevent accidental release? An integrated safety locking mechanism secures the clamp in the closed position to prevent unintended opening under vibration or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 3.5 kN Clamping Force, Zinc-Plated Wafer Base - Kukamet
Take advantage of a galvanised construction, high clamping and holding forces, and a compact design to secure repeatable fixture results. Order the clamp directly via Metav Werkzeuge or request technical advice from our consultants. 111 Horizontal toggle clamp by Kukamet — galvanised, 90° lever The 111 Horizontal toggle clamp is a horizontal-base lever clamp engineered for secure, repeatable holding in industrial fixtures and jigs. Galvanised finish for corrosion resistance 90° lever for secure horizontal clamping M10x70 pressure spindle included Compact weight 0.81 kg for easy handling Reliable clamping force for series work The lever clamp delivers a clear performance benefit for repetitive production tasks: a clamping force of 3,500 N with a holding force of 3,650 N, providing a secure grip under cyclic loads. The difference between clamping and holding force is intentional — the clamping force denotes the operational closing pressure while the holding force indicates the maximum retained load once engaged. This distinction helps planners select the right device for batch processes where repeatability and part stability are crucial, reducing rework and inspection cycles. Galvanised body for long-term workshop use A galvanised finish shields the mechanism against surface corrosion, making the clamp suitable for workshop environments where moisture and coolant residues are present. The galvanised surface reduces maintenance frequency and helps preserve the mechanical linkage over time. At a weight of 0.81 kg, the unit balances robustness with manageable handling during fixture assembly, allowing engineers to mount or reposition clamps without special lifting aids. Fast integration into fixtures and jigs Engineered with a horizontal base, a 90° lever travel and an M10x70 pressure spindle, the clamp is ready for direct mounting on bespoke fixtures or machine tables. The horizontal base simplifies alignment in production jigs and provides a low-profile clamp point, which helps maintain clear access to the workpiece. The M10x70 spindle enables straightforward adjustment of contact pressure and compensates for minor workpiece height variation, supporting quick setup and minimal tool changeover time. Choose the Kukamet 111 horizontal toggle clamp for secure, repeatable holding in production fixtures — contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 111-4 GTIN: 8680731500226 Manufacturer: Kukamet Facts Weight: 0.81 kg Clamping force: 3,500 N Holding force: 3,650 N Angle: 90° Special features Galvanised material Horizontal base Pressure spindle: M10x70 90° lever clamp design FAQ What maximum holding capacity does this clamp provide? The Kukamet 111 horizontal toggle clamp provides a holding force of 3,650 N and a clamping force of 3,500 N (SKU 111-4), suitable for secure retention in many fixture applications. Is the surface protected against corrosion? Yes, the body is galvanised, giving the clamp enhanced resistance to surface corrosion and reducing routine maintenance. How is the clamp mounted in a fixture? The unit uses a horizontal base for mounting and includes an M10x70 pressure spindle for height adjustment; this allows direct integration into bespoke jigs and machine tables. Can the spindle be adjusted to accommodate different workpiece heights? The clamp is supplied with an M10x70 pressure spindle that permits straightforward adjustment of the contact point to match workpiece variations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 4.5 kN Closing Force, 5 kN Holding Force, Zinc-Plated Wafer Base - Kukamet
Reliable clamping performance, a corrosion‑resistant zinc finish and a compact 1.52 kg design make this horizontal clamp a practical choice for repeatable fixturing; order the Kukamet Horizontalspanner 111 directly via Metav Werkzeuge or consult our advisors for application guidance. Horizontalspanner 111 — horizontal clamp with 4,500 N clamping force (Kukamet) Horizontalspanner 111 is a horizontal lever clamp engineered for secure, repeatable fixture in workshop and light industrial applications, combining a zinc‑plated finish with a robust M12×80 pressure spindle. 4,500 N clamping force 5,000 N holding force Zinc‑plated corrosion resistance Horizontal base for stable mounting Secure force where it matters The clamp delivers a 4,500 N clamping force and a 5,000 N holding force, providing reliable contact pressure for machining, assembly and fastening operations. The distinction between clamping and holding force is important: clamping force refers to the active downward pressure applied during closure, while holding force indicates the static retention capability once the lever is engaged. This separation ensures predictable behaviour during repetitive cycles and reduces rework caused by movement under load. Durable finish for demanding environments A zinc‑plated surface protects the mechanism against corrosion, extending service life in workshop environments where coolant splash or humidity may be present. The surface treatment keeps tolerances intact and minimises maintenance intervals, enabling steady production throughput. The compact mass of 1.52 kg keeps the clamp lightweight for fixture plates without compromising stability, allowing integration into jigs where limited payload is a consideration. Practical design for fast, repeatable clamping Designed as a horizontal lever clamp with a horizontal base for mounting, the device secures workpieces at a 90° operating angle and features an M12×80 pressure spindle for fine pressure adjustment. The lever mechanism converts manual input into repeatable holding action, shortening cycle times in batch work and ensuring consistent positioning in assembly processes. Where quick clamping and clear visual engagement are required, this design reduces operator effort while maintaining safety margins. Simple integration and clear specifications Installation requires only horizontal mounting and standard fastening; the compact footprint suits modular fixture plates and dedicated jigs. Clear, measurable specifications such as clamping/holding forces, spindle thread and overall weight support straightforward planning for fixture design and load calculations. The clamp’s robust mechanical concept means predictable performance in fixtures where reliable, repeatable retention is a priority. Contact Metav Werkzeuge today to discuss Kukamet clamps and secure local supply from Emmerich for your production fixtures Technical data SKU: 111-5 GTIN: 8680731500301 ECLASS: 21041719 ETIM: EC011973 Brand: Kukamet Model: 111 Core specifications Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.52 kg Pressure spindle: M12×80 Mounting: horizontal base Operating angle: 90° Materials and features Zinc‑plated finish Type: horizontal lever clamp Mounting style: horizontal base No additional special features FAQ What load capacities can be expected from this clamp? The Kukamet Horizontalspanner 111 offers a clamping force of 4,500 N and a holding force of 5,000 N, suitable for many workshop and light industrial fixturing tasks. Is the clamp suitable for integration into modular fixture plates? Yes, the horizontal base and compact weight of 1.52 kg make the clamp compatible with modular plates and bespoke jigs where space and payload are limited. How is clamping force adjusted on this model? Adjustment is achieved via the M12×80 pressure spindle, which allows fine tuning of contact pressure for varying workpiece thicknesses. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 850 N Closing Force, 1,000 N Holding Force, Blackened - Kukamet
The compact design combines a horizontal foot for stable mounting with a clamping force of 850 N and a holding capacity of 1,000 N, delivering reliable fixture performance for small jigs and repeatable production tasks. Order the clamp directly via Metav Werkzeuge or contact our consultants for specification support. Horizontal clamp 111 by Kukamet — horizontal base, 850 N clamping force the Horizontal clamp 111 is a compact horizontal clamping device designed for jigs, fixtures and small-scale production applications where a secure 90° hold and quick actuation are required Compact horizontal base design Clamping force up to 850 N Holding force up to 1,000 N Black blued corrosion resistance Secure clamping with measurable force and dependable repeatability The clamp delivers a consistent clamping force of 850 N, backed by a holding force of 1,000 N, which translates into secure workholding for recurring operations. This measurable performance reduces part slippage and rework, improving throughput. The compact geometry means integration into existing fixtures is straightforward; minimal workspace is occupied while the force figures remain suitable for many metalworking and assembly tasks. The result is a balance between performance and space efficiency that supports steady production flow. Fast integration and straightforward mounting for fixtures Mounting is achieved via a horizontal foot, enabling fixed placement on jigs and fixture plates. The actuator uses an M5x35 spindle for contact pressure adjustment and a fixed 90° pivot that keeps the clamping arm aligned with the workpiece. These design elements shorten setup times and simplify repeat installations across multiple stations. For engineers specifying equipment, the compact weight of 0.125 kg aids dynamic balancing where several clamps are used in one assembly, and the defined thread size supports standard tooling for maintenance or replacement. Corrosion-resistant finish and service-friendly construction A black blued finish protects key surfaces against corrosion and provides a low-reflective surface suitable for workshop environments. The choice of finish reduces the need for frequent cosmetic maintenance while helping the clamp retain functional precision over time. The mechanism is constructed to allow basic adjustment and replacement of wear parts without complex procedures, keeping downtime low and maintenance predictable for production planners. Designed for practical workshop and light industrial use This horizontal clamping device suits a range of materials and tasks where a compact, repeatable clamp is required — from assembly benches to small machining fixtures. The robust mechanical values make it appropriate for repeatable holding in medium-duty operations and for use in modular tooling systems. The SKU B111-1 and associated identifiers support traceability in procurement and inventory processes, simplifying reordering and stock management for purchasing teams. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal clamp 111 into production fixtures — Metav Werkzeuge is available at +49 2822 7131930 or info@metav-werkzeuge.com for specification guidance and supply from Emmerich Technical data SKU: B111-1 GTIN: 8680731503753 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Clamping force max: 850 N Holding force max: 1,000 N Angle: 90° Weight: 0.125 kg Special features Mounting: horizontal foot Spindle: M5x35 Finish: black blued Category: Spanner FAQ What clamping and holding forces does this clamp provide? The clamp offers a clamping force of 850 N and a holding capacity of 1,000 N, providing reproducible fixation for light to medium-duty tasks with the Horizontal clamp 111. Is the clamp suitable for fixture plates and jigs? Yes, the horizontal foot mounting and compact footprint make this clamp appropriate for integration into jigs, fixture plates and modular tooling systems. How is the contact pressure adjusted? Contact pressure is adjusted via the supplied M5x35 spindle; the thread size uses common tooling for simple on-site adjustment or replacement. What protection does the surface finish provide? The black blued finish provides corrosion resistance and a low-reflective surface, which helps maintain component appearance and functional durability in workshop environments. Can this clamp be used for repeated production cycles? The mechanical design and specified force ratings support repeatable production use; the clamp is intended for recurring clamping in assembly and light machining tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, M8x50 Spindle, 2.3 kN Thrust, 2.5 kN Holding Force, Blackened - Kukamet
Take advantage of a compact lever clamp that combines high holding capacity, a low weight of 0.34 kg, and a robust blackened blued finish for reliable, repeatable fixturing. Order the Kukamet horizontal clamp directly via Metav Werkzeuge or consult the Metav team for application advice. 111 Horizontal Clamp by Kukamet — horizontal foot, lever-style, M8×50 spindle 111 is a compact horizontal clamp designed for secure holding in jigs and fixtures, offering defined clamping and holding forces for repeatable production processes. Up to 2,300 N clamping force 2,500 N holding force for fixtures Horizontal foot for stable mounting M8×50 pressure spindle fitted Consistent, measurable holding performance for fixtures The lever-style clamp delivers a clear mechanical advantage thanks to its specified clamping force (2300 N) and holding force (2500 N), which provide secure fixation for medium-duty machining and assembly tasks. The defined force values help to calculate fixture strength and safety margins, making planning more straightforward. The integrated M8x50 pressure spindle allows precise contact pressure adjustment, ensuring reliable repeatability for batch setups while limiting workpiece deformation. Compact mounting that speeds up set-up times Designed with a horizontal foot and a fixed 90° lever position, this clamp is tailored to fit into tight fixture layouts where space is at a premium. The lightweight construction (only 0.34 kg) reduces added mass on movable elements and simplifies handling during manual set-up. Wherever short cycle times and fast changeovers matter, the compact form factor and lever mechanism help reduce set-up time and improve workplace ergonomics. Durable finish and dependable supply chain for workshop use The blackened blued finish provides basic surface protection and a uniform appearance, reducing the need for frequent maintenance in standard workshop environments. Manufactured by Kukamet and distributed through Metav Werkzeuge, the product benefits from a European supply filter that emphasises consistent quality and availability. Metav’s experience in precision tools and broad product range supports reliable delivery and long-term availability for production and trade customers. For application-specific guidance and to order the Kukamet 111 horizontal clamp, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for existing fixtures Technical data Article number: B111-3 GTIN: 8680731503777 Brand: Kukamet SKU: B111-3 Facts Clamping force max: 2300 N Holding force max: 2500 N Weight: 0.34 kg Angle: 90° Pressure spindle: M8×50 Special features Mounting: horizontal foot Finish: blackened blued finish Style: lever clamp Arm: not applicable FAQ How is the clamp mounted in a fixture? The Kukamet 111 horizontal clamp is mounted via a horizontal foot and secures at a 90° lever position; the pressure spindle is M8×50 for direct fixture integration. What are the clamping and holding capacities? The unit provides a maximum clamping force of 2300 N and a holding force of 2500 N, values suitable for reliable medium-duty fixturing. Does the surface finish protect against corrosion? The blackened blued finish on the clamp offers basic corrosion resistance and a low-maintenance surface for standard workshop conditions. Is this clamp suitable for compact jigs and fast set-ups? Yes. The lever-style design, horizontal foot and light weight (0.34 kg) make the clamp well suited to compact jigs and applications that require quick changeovers. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Kopf
Technische Daten: Bezeichnung: Kopf Vollhartmetall Durchmesser: 138 mm bis 190 mm Geeignet für: Bohrkopfdurchmesser 85,725-86mm (Typ NT) oder Bohrkopfdurchmesser 85,725/100/105/110/115mm je nach Ausführung Gewicht: 12,5 kg - 18 kg Geschwindigkeit: Max. 2000r.p.m. Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
90° Pneumatic Clamp 2,000 N Push Force, 2,500 N Hold Force, Vertical Base, Zinc-Plated, Massive Holding Arm - Kukamet
Combine quick pneumatic actuation, a massive 117 mm holding arm and a galvanised body to achieve reliable, repeatable clamping in production fixtures; order the unit directly via Metav Werkzeuge or consult the team for tailored fixturing advice. Pneumatic Clamp 652 — Kukamet pneumatic lever clamp with 117 mm arm and galvanised body Pneumatic Clamp 652 is a compact pneumatic lever clamp designed for vertical-foot mounting in jigs and fixtures, delivering high holding force for repeatable production clamping. Pneumatic actuation for fast clamping Massive 117 mm holding arm Galvanised body resists corrosion Faster cycles and reproducible clamping for production lines The pneumatic drive provides consistent, repeatable motion with short cycle times, enabling higher throughput and fewer rejects. With pneumatic actuation capable of delivering up to 2,000 N of operating force and a holding force of 2,500 N, the clamp secures workpieces reliably during machining or assembly operations. The controlled pneumatic stroke reduces operator variability, so fixture repeatability improves and process stability is increased — a clear efficiency gain for batch and continuous production. Robust construction that endures workshop conditions A galvanised body and a massive holding arm provide mechanical stability and corrosion resistance for long service life in demanding environments. The 117 mm arm length gives a favourable leverage ratio for firm engagement while the vertical foot mounting ensures a compact footprint and secure attachment to tooling plates. The 90° orientation suits typical lever-clamp geometries, simplifying integration into existing fixtures and reducing design iteration time. Simple integration and predictable maintenance for uptime The clamp is engineered for straightforward installation and routine inspection: the vertical base allows quick positioning on standard tooling plates, and the solid arm minimises deformation under load. Specifying this pneumatic lever unit streamlines the assembly of clamping systems, helping to avoid complex bespoke solutions. For integration planning, the product’s SKU 652-3-D-C2 and core performance figures support rapid selection and procurement decisions, while standardised pneumatic connection practices keep maintenance predictable. Contact Metav Werkzeuge for supply and configuration of the Kukamet Pneumatic Clamp 652 (SKU 652-3-D-C2) and benefit from local stock and technical advice from Emmerich Technical data Article number: 652-3-D-C2 Manufacturer: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Arm length: 117 mm Max pneumatic force: 2,000 N Max holding force: 2,500 N Angle: 90° Special features Material: galvanised Mounting: vertical foot Massive holding arm Category: Clamps FAQ What is the maximum holding force of this clamp? The clamp offers a maximum holding force of 2,500 N, providing secure retention for typical fixturing and light machining tasks. Can the unit be mounted directly on a tooling plate? Yes — the vertical foot mounting is intended for direct attachment to standard tooling plates and fixture bases for compact integration. Is the body treated against corrosion? The construction is galvanised, offering enhanced resistance to corrosion in workshop environments. Which applications suit this pneumatic lever clamp? The device is suited to jigs, fixtures and production clamping where repeatable, pneumatic actuation and robust holding force are required. What is the exact product designation to order? Order using Pneumatic Clamp 652, Kukamet, SKU 652-3-D-C2 to ensure correct supply and configuration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Horizontal Base Without Pneumatic Cylinder, 4,000 N Thrust / 18,000 N Hold - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines galvanised construction with clear performance figures — 4,000 N clamping force and 18,000 N holding force — for dependable fixture security in production and jigs. Order the clamp directly via Metav Werkzeuge or consult our advisors for integration recommendations. 681 Pneumatic clamp — horizontal-foot clamp, galvanised (Kukamet) The 681 pneumatic clamp is a robust industrial clamping device for 90° applications, designed for horizontal-foot mounting and supplied without a pneumatic cylinder for flexible system integration. Robust galvanised steel construction 4,000 N maximum clamping force 18,000 N maximum holding force Horizontal-foot mounting, 90° clamping angle Reliable clamping performance for demanding fixtures The clamp delivers precise and repeatable clamping results thanks to its defined 4,000 N actuation capability and substantial 18,000 N static holding capacity. These two values describe different but complementary properties: the first refers to the active pressing force applied during engagement, the second to the maximum load the device resists once closed. This separation ensures a secure hold of components under load while allowing control over the actuation dynamics. The galvanised finish contributes to long-term dimensional stability by resisting corrosion in workshop environments, supporting uninterrupted production cycles and predictable fixture behaviour. Simple integration and flexible actuation options Equipped with a horizontal foot and a fixed 90° clamping orientation, the unit is intended for straightforward mounting on fixture plates and tooling frames where transverse clamping is required. As it is supplied without pneumatic cylinder, the clamp can be paired with a customer-selected actuator or an existing pneumatic system, allowing specification of stroke, speed and cushioning to match cycle requirements. The compact design and a moderate mass of 4.6 kg permit installation in both manual jigs and semi-automated assemblies while keeping the overall fixture footprint economical and serviceable. Durability and low-maintenance design that keeps production running Constructed from galvanised steel and engineered for workshop use, the device prioritises longevity and simple upkeep. The substantial holding characteristic reduces slipping and the need for frequent repositioning, lowering process disruptions and rework. Maintenance is limited to visual inspection and lubrication at scheduled intervals; the absence of a built-in cylinder reduces the number of wear items supplied with the clamp and makes replacement or upgrade of the actuator straightforward. These qualities help achieve consistent output and reduced downtime across assembly and machining tasks. Speak with Metav Werkzeuge for a technical consultation on the Kukamet 681 pneumatic clamp and receive tailored installation guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 681-6-M GTIN: 8680731505061 Manufacturer: Kukamet Facts Weight: 4.6 kg Maximum clamping force: 4,000 N Maximum holding force: 18,000 N Clamping angle: 90° Special features Material: galvanised steel Mounting: horizontal foot Delivered without pneumatic cylinder Category: clamp / clamping device FAQ What is the difference between clamping force and holding force? Clamping force describes the active pressing capability (the 4,000 N figure for the 681 pneumatic clamp), while holding force denotes the maximum static load the closed clamp can resist (18,000 N) without slipping. Is a pneumatic cylinder included with the clamp? No, the clamp is supplied without pneumatic cylinder to allow selection of an actuator that matches cycle speed and stroke requirements. Can the clamp be mounted on a horizontal plate? Yes. The unit features a horizontal-foot mounting arrangement and a fixed 90° clamping orientation suitable for plate-mounted fixtures. What materials is the clamp made from, and how does that affect service life? The main components are galvanised steel, providing corrosion resistance that supports long service life in standard workshop atmospheres and reduces the frequency of surface maintenance. How can the clamp be integrated into an existing pneumatic system? The clamp’s actuator interface accepts an external pneumatic cylinder; selection of cylinder size and cushioning allows tuning of actuation speed, stroke and impact behaviour for the specific application and cycle. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Horizontal Foot, No Pneumatic Cylinder, 2,500 N Clamping Force, Zinc-Plated - Kukamet
Benefit from robust 90° clamping, galvanised corrosion resistance and a compact 3.1 kg design that supports reliable fixture setups; order the 682 pneumatic clamp directly via Metav Werkzeuge or consult the specialists for integration guidance. 682 Pneumatic Clamp (lever clamp, galvanised, horizontal foot) 682 Pneumatic Clamp is a compact lever-style clamp engineered for secure 90° workholding with a horizontal foot mount and supplied without a pneumatic cylinder. Galvanised construction for corrosion resistance Horizontal foot mounting for easy bench fixing Clamping force up to 2,500 N Holding force rated at 9,000 N Consistent, measurable clamping that improves throughput The 682 delivers a defined clamping force of 2,500 N and a holding force of 9,000 N, values that convert to predictable part retention during machining or assembly. Specifying force in newtons (N) allows direct comparison with other fixtures and helps planners calculate safety factors for tooling and jigs. The compact mass of 3.1 kg keeps the fixture lightweight for repositioning, while the lever clamp mechanism provides quick actuation and visibly repeatable clamping, reducing cycle-time variability and the need for rework. Simple mounting and integration for workshop systems A horizontal foot configuration simplifies attachment to plates and benches without complex adapters, enabling rapid fixture assembly on standard tooling plates. The clamp is supplied without pneumatic cylinder, which permits selection of a cylinder to match existing pneumatic infrastructure or specific stroke requirements. The 90° clamping angle is well suited to typical right-angle locating tasks in welding, inspection and light machining setups, and the galvanised finish helps maintain appearance and function in workshop environments. Robust materials and service life for frequent use Manufactured in galvanised steel, the clamp resists surface corrosion and preserves contact geometry over extended use, supporting long-term repeatability. The lever-style design reduces component count and simplifies maintenance: worn or damaged actuator components can be identified and replaced without full fixture overhaul. For procurement and planning, the model’s compact footprint and clear force ratings make it straightforward to include in fixture lists for production cells where durable, reliable clamping is required. For tailored advice on integrating the Kukamet 682 into existing jigs or for procurement via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists provide application support and supply from Emmerich. Technical data Article number: 682-4-M GTIN: 8680731505085 Manufacturer: Kukamet Facts Weight: 3.1 kg Clamping force (max): 2,500 N Holding force (max): 9,000 N Clamping angle: 90° ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot Supplied without pneumatic cylinder Lever clamp design FAQ What clamping force does this clamp provide? The 682 pneumatic clamp provides a clamping force of 2,500 N and a holding force rated at 9,000 N for secure workholding. Is a pneumatic cylinder included with the clamp? No, the clamp is supplied without a pneumatic cylinder to allow integration with an existing pneumatic system or the selection of a cylinder to match stroke and force requirements. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot, which enables straightforward bolting to bench plates or fixture bases for stable right-angle clamping. Which material finish is used and what are the benefits? The clamp is made from galvanised steel; the finish offers enhanced corrosion resistance and long-term preservation of contact geometry. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Base Without Handle, 2 000 N Push / 2 500 N Hold, Zinc Plated - Kukamet
Reliable clamping with a 2,500 N maximum hold and 2,000 N pneumatic push force delivers secure, repeatable workholding for production processes; the compact, zinc-plated design and vertical-foot base simplify integration into fixtures. Order the Kukamet 651 pneumatic clamp directly via Metav Werkzeuge or contact our consultants for application support. Kukamet 651 Pneumatic Clamp — Vertical-foot pneumatic clamp with 90° actuation The 651 pneumatic clamp is a 90° actuation workholding device designed for stable, repetitive clamping in assembly lines, jigs and production fixtures. Pneumatic actuation, 2000 N push force Holds up to 2,500 N clamping force Vertical-foot mounting for stable setup Zinc-plated corrosion protection Secure, high-force clamping for efficient workflows Built to provide consistent repeatability, this pneumatic clamping unit converts compressed-air actuation into a reliable holding force of up to 2,500 N, with a maximum push of 2,000 N. The right-angled actuation at 90° is particularly suited to applications where the clamping movement must clear components or tooling, reducing handling steps and helping to shorten cycle times. The result is a measurable improvement in process reliability and throughput when used in repetitive production tasks. Compact design that simplifies fixture integration Weighing just 0.91 kg, the unit offers a compact footprint and a vertical-foot mounting option that eases installation on plates and tooling blocks without requiring elaborate substructures. The absence of a manual handle reflects the pneumatic-only operation, making the device suitable for automated stations or where manual clearance is needed. The zinc-plated finish provides basic corrosion resistance, helping to maintain appearance and function in standard workshop environments. Reliable operation with low upkeep for continuous use Mechanical simplicity and pneumatic actuation mean fewer wear parts and straightforward maintenance routines. The clamp delivers repeatable clamping cycles with minimal adjustment, supporting stable quality control in assembly tasks. For production environments seeking dependable workholding that integrates easily with pneumatic control systems, this clamp offers a balance of holding power, compactness, and robustness that helps reduce downtime and protect workpiece integrity. Choose Kukamet reliability for consistent workholding — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 651-3 GTIN: 8680731503098 eClass: 21021004 ETIM: EC011973 Facts Weight: 0.91 kg Maximum clamping force: 2,500 N Maximum actuation (push) force: 2,000 N Angle: 90° Special features Material: zinc-plated Mounting: vertical-foot Special feature: without handle Type: pneumatic clamp FAQ What clamping and actuation forces does this clamp provide? The 651 pneumatic clamp (Kukamet, SKU 651-3) delivers a maximum clamping force of 2,500 N and a pneumatic push force up to 2,000 N for secure workholding. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and absence of a manual handle make the clamp well suited to automated stations and integration with pneumatic control systems. How is the unit mounted to a fixture or base? The device uses a vertical-foot mounting that allows direct attachment to plates or tooling blocks for a stable installation. What material protection is applied to the clamp? The clamp is zinc-plated, offering basic corrosion protection appropriate for standard workshop and production environments. Does the clamp require special maintenance? Maintenance is straightforward due to the simple pneumatic actuation; routine inspection of pneumatic connections and seals is recommended to ensure long service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Base Without Handle, 3,000 N Thrust, Zinc Plated - Kukamet
Robust galvanised construction and a 3,000 N pneumatic clamping capacity provide secure, repeatable holding for confined fixtures; the compact vertical mounting foot and handle-free design simplify integration on jigs and production lines. Order the 651 pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. 651 Pneumatic Clamp — Vertical foot, 3,000 N clamping force (Kukamet) A 651 pneumatic clamp engineered for secure, repeatable clamping in production, assembly and jig applications. Vertical mounting foot Galvanised corrosion-resistant finish 3,000 N pneumatic clamping force Without handle for compact installation Secure clamping that keeps production moving The galvanised pneumatic clamping unit combines corrosion resistance with a high clamping output to deliver reliable performance on busy production floors. With a rated clamping force of 3,000 N, the device provides consistent pressure for repeatable cycles, reducing part movement during machining or assembly. The robust finish helps protect against shop-floor contamination and humidity, extending service life and reducing the frequency of replacements, which supports uninterrupted workflows and predictable maintenance intervals. Measurable holding and safety benefits explained Rated holding capacity of 3,300 N gives a safety margin above the active clamping force; this difference ensures the fixture maintains position even under intermittent loads. Clamping force refers to the active force applied during engagement, while the holding value describes the maximum static load the clamp resists when closed. The clear numerical ratings allow straightforward integration into process calculations and risk assessments, enabling planners and engineers to match the clamp to specific applications with confidence. Compact installation for confined jigs and fixtures Designed with a vertical mounting foot and a fixed 90° actuation angle, the clamp fits tight layouts where horizontal space is limited. The handle-free configuration reduces profile height and potential interferences on multi-clamp fixtures, while a unit mass of 1.945 kg keeps the overall fixture weight low, which can simplify handling and reduce load on positioning devices. These attributes make the unit particularly suitable for automated cells, assembly jigs and presses where clearance and repeatability are critical. Practical reliability and partner support for workshop use Manufactured to be robust and straightforward in operation, the device minimises downtime through a simple, durable design. Routine maintenance is limited to periodic inspection of pneumatic connections and the clamping surface; the galvanised coating helps reduce corrosion-related wear. Combined with Metav Werkzeuge’s position as a quality filter for the European market, customers gain access to centralised procurement, product breadth and the assurance of consistent supply from a trusted partner. For ordering or technical advice on the Kukamet 651 pneumatic clamp, contact Metav Werkzeuge for expert guidance and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 651-4 GTIN: 8680731503104 EClass: 21021004 ETIM: EC011973 Facts Clamping force: 3,000 N Holding force: 3,300 N Weight: 1.945 kg Angle: 90° Special features Material: galvanised Mounting: vertical mounting foot Handle: without handle Design: lever-type pneumatic clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet 651 pneumatic clamp provides a clamping force of 3,000 N and a holding capacity of 3,300 N, specified for secure retention in production fixtures (SKU 651-4). How is the clamp mounted in a fixture? The clamp is supplied for vertical mounting via its dedicated foot; the vertical mounting foot and fixed 90° actuation are designed for compact jig and fixture integration. Is a handle included for manual actuation? No; the unit is delivered without a handle to reduce profile height and allow closer spacing in automated or multi-clamp fixtures. What surface protection does the clamp have for shop-floor use? The clamp features a galvanised finish, which improves corrosion resistance and helps extend component life in humid or contaminated environments. Which industries or applications suit this clamp best? The unit is intended for production, assembly and jig applications where repeatable pneumatic clamping is required; its compact design is ideal for automated cells and confined fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Base Without Handle, 4,500 N Thrust 5,000 N Hold, Zinc-Plated - Kukamet
Take advantage of the combination of high holding power and corrosion-resistant construction to secure workpieces reliably in automated fixtures; order the unit directly via Metav Werkzeuge or consult our specialists for application support. Pneumatic clamp 651 — Vertical-foot clamp, 90° stroke (Kukamet) The 651 pneumatic clamp is a compact pneumatic clamping unit designed for fixture and jig applications in production and workshop environments, providing robust 90° clamping and stable vertical-foot mounting. Vertical base for secure mounting Galvanised housing resists corrosion 90° clamping angle for firm fixture Up to 5,000 N holding force Consistent clamping power for repeatable results The clamping unit delivers a clear separation between actuation and retention: a 4,500 N maximum pressing force provides fast, positive engagement while a 5,000 N maximum holding force secures the workpiece during machining. These figures describe the peak actuator pressure and the static retention capacity respectively; together they reduce vibration and positional drift, which improves repeatability across batches and shortens inspection cycles. The performance data supports process reliability and fewer reworks in medium-duty production environments. Durable construction for long service life The body is galvanised, giving a corrosion-resistant surface that withstands coolant mist and typical shop-floor conditions. With a compact mass of 3.678 kg, the unit balances solidity and ease of installation. The vertical base (vertical-foot) design simplifies integration into t-slotted plates or fixture blocks and saves lateral space on the workbench. The clamp’s 90° orientation provides a low-profile locking direction that is compatible with many standard tooling concepts and reduces interference with machining operations. Suitable for automated and manual workflows Actuated pneumatically, this clamping device eliminates the need for manual levers and is supplied without a handle, making it ideal for automatic sequences and guarded cells where human access is limited. Pneumatic actuation allows precise cycle timing and easy integration with compressed-air controls. For users less familiar with pneumatic systems: the unit converts compressed-air pressure into linear clamping motion, enabling short clamp/release times and consistent clamping force independent of operator strength. Practical benefits for workshop logistics and procurement The compact format and standard mounting arrangement make the clamp straightforward to replace or upgrade within existing fixtures, reducing downtime during maintenance. As a component from Kukamet, the unit offers industrial-grade reliability while fitting into centrally supplied tool inventories. When ordered via Metav Werkzeuge, customers benefit from consolidated sourcing and a European distribution point that supports predictable replenishment and quality filtering for the workshop supply chain. Contact Metav Werkzeuge for tailored fixture advice and availability of the Kukamet 651 pneumatic clamp (SKU 651-5), including delivery options from Emmerich and application guidance by our specialists Technical Data Article number (SKU): 651-5 GTIN: 8680731504958 Manufacturer: Kukamet Core specifications Weight: 3.678 kg Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Clamping angle: 90° Materials & features Material: galvanised Mounting: vertical base Special feature: without handle Classification: eClass 21021004 ETIM: EC011973 FAQ What maximum holding force does the clamp provide? The Kukamet 651 pneumatic clamp offers a maximum holding force of 5,000 N, suitable for medium-duty fixture applications where stable retention is required. How is the clamp mounted to a fixture plate? Mounting is achieved via a vertical base; the vertical-foot design allows secure attachment to t-slots or custom fixture blocks using standard fasteners. Can the clamp be used in automated production cells? Yes. The pneumatic actuation and handle-free design make the 651 suitable for guarded or automated cells where pneumatic control and compact geometry are required. What material is the housing made from and how does it resist corrosion? The housing is galvanised, providing a protective zinc layer that helps resist corrosion from coolants and humid shop-floor conditions. Is the pressing force the same as the holding force? No. The pressing force (4,500 N) refers to the actuator’s engagement force, while the holding force (5,000 N) indicates the static retention capacity once the clamp is closed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Base Zinc-Plated 1,200 N Holding Force, 1,400 N Clamp Force - Kukamet
Take advantage of a compact, zinc‑plated pneumatic clamp that combines reliable clamping and holding forces with a vertical‑foot mounting for straightforward integration into fixtures; order via Metav Werkzeuge or consult the team for application guidance. Pneumatic clamp 652 — Kukamet zinc‑plated, 90° vertical‑foot The Pneumatic clamp 652 is a zinc‑plated pneumatic clamping unit designed for secure fixture holding in production and workshop environments. Zinc‑plated corrosion protection Vertical‑foot mounting Clamping force 1,200 N Holding force 1,400 N Faster, repeatable clamping for continuous production The Pneumatic clamp 652 delivers controlled pneumatic actuation that enables rapid, repeatable cycles, reducing fixture set‑up time and increasing throughput. With a maximum clamping force of 1,200 N and a holding force of 1,400 N, the device secures components consistently under load, so fixtures remain stable during machining or assembly. The pneumatic operation is suitable for automated sequences and reduces manual handling, supporting smoother production workflows and predictable process outcomes. Corrosion‑resistant finish for longer service life A zinc‑plated surface provides effective corrosion resistance in workshop atmospheres, extending service intervals and reducing maintenance effort. The galvanised finish protects the mechanical surfaces from rust and wear in mixed‑use production areas, which helps preserve functional tolerances and prolongs the unit’s operational life. For operations that prioritise uptime, the low‑maintenance nature of a treated surface supports dependable performance over repeated cycles. Compact vertical mounting that simplifies integration Designed with a vertical foot mounting and a 90° locking angle, the clamp integrates easily into jigs and fixtures where upright attachment is required. The compact body and a mass of 0.57 kg allow installation in space‑constrained assemblies without adding unnecessary inertia. The defined 90° locking orientation provides clear mechanical positioning for repeatable clamping, while the vertical mount keeps the force vector aligned with many common tooling arrangements. Application focus: fixtures, jigs and repetitive tasks Suited to general workshop and industrial fixturing, the unit is particularly effective where a robust, fast pneumatic clamp is needed for repetitive tasks. The combination of modest weight, zinc‑plated durability and measurable clamping/holding figures makes it a practical choice for production lines, assembly stations and test fixtures where reliable part retention is essential. Integration into pneumatic control systems is straightforward, and the clamp’s specification supports consistent process control across batches. Contact Metav Werkzeuge today to specify the Kukamet pneumatic clamp 652 for fixture projects or request tailored technical advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data SKU: 652-2 GTIN: 8680731503906 Brand: Kukamet eClass: 21021004 ETIM: EC011973 Key figures Weight: 0.57 kg Clamping force: 1,200 N Holding force: 1,400 N Angle: 90° Mounting: Vertical foot Materials & features Finish: Zinc‑plated Material: Zinc‑plated steel Mounting type: Vertical foot Arm: Not applicable Special features: None FAQ What forces does the clamp provide? The Kukamet pneumatic clamp 652 offers a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for consistent fixture retention. Is the clamp suitable for use in production fixtures? Yes, the unit is designed for jigs and fixtures in production environments where repeatable pneumatic clamping and a fixed 90° lock are needed. What finish and corrosion protection does it have? The device features a zinc‑plated finish that provides corrosion resistance appropriate for workshop and light industrial conditions. How is the clamp mounted? Mounting is via a vertical foot, enabling upright installation and direct force transmission into the fixture base. What is the weight and are full dimensions available? Weight is 0.57 kg; for full dimensional drawings refer to the product catalogue or technical datasheet included with the item. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Handle, 2000 N Thrust, Zinc Plated, 0.985 kg - Kukamet
The compact design and robust construction combine fast pneumatic actuation, galvanised corrosion resistance and a high holding force of 2,500 N for reliable fixture performance; order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. 651 Pneumatic Clamp by Kukamet — vertical-foot mounting, 2,500 N holding force The 651 Pneumatic Clamp is a compact pneumatic clamping solution for jigs and fixtures, engineered for vertical-foot mounting and equipped with a vertical handle for space-saving operation. Pneumatic actuation for fast clamping Vertical handle and vertical-foot mounting Galvanised construction for corrosion resistance Holding force up to 2,500 N Faster cycle times through pneumatic actuation The pneumatic drive delivers consistent, repeatable motion, shortening cycle times and reducing setup variance. With a max clamping force of 2,000 N and a holding force of 2,500 N, the unit secures workpieces reliably during machining cycles. The pneumatic mechanism removes the need for manual leverage, enabling faster fixtures and fewer operator steps. For production environments where throughput and repeatability matter, the clamping system contributes directly to process efficiency and predictable output. Robust construction for long service life A galvanised housing and simple mechanical layout minimise corrosion and wear, supporting long service intervals and predictable replacement planning. The vertical handle and vertical-foot mounting reduce interference in dense fixture arrangements, allowing closer part nesting and more compact tooling designs. At under 0.985 kg, the assembly is lightweight while still offering substantial holding performance, making it suitable for modular fixtures and clamping frames where mass and balance are considerations. Clear technical advantages and practical maintenance Understanding the difference between clamping and holding values helps when designing fixtures: clamping force refers to the active force applied during actuation, while holding force indicates the residual securement under load. The unit’s sealed pneumatic components require only routine inspection and basic pneumatic maintenance—periodic checks for air leaks, seal condition and lubrication keep performance constant. The simple geometry of the device makes integration into existing fixtures straightforward and supports rapid replacement when reconfiguration is needed. Contact Metav Werkzeuge for tailored fixture advice and to secure a Kukamet 651 pneumatic clamp with reliable supply from our Emmerich warehouse Technical data Article number: 651-3-H GTIN: 8680731503500 eClass: 21021004 ETIM: EC011973 Core technical data Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.985 kg Clamping angle: 90° Features & construction Pneumatic clamp Galvanised finish Vertical handle Vertical-foot mounting FAQ What is the difference between clamping force and holding force? Clamping force is the actuation force applied during operation, while holding force is the maximum static retention; the 651 Pneumatic Clamp lists 2,000 N clamping and 2,500 N holding force. How is the clamp mounted in a fixture? The device uses a vertical-foot mounting and a vertical handle, allowing secure attachment to fixture plates and space-saving orientation in jigs. Is the finish suitable for harsh shop environments? The galvanised finish on the Kukamet pneumatic clamp provides corrosion resistance suitable for standard workshop and production atmospheres. Can the clamp be integrated into modular tooling systems? Yes; the compact form factor and sub-1 kg mass facilitate integration into modular fixture assemblies and rapid reconfiguration. Are maintenance requirements complex for this clamp? Maintenance is straightforward: check pneumatic seals and connections, inspect for wear, and keep components clean to maintain consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Horizontal Base, 2.5 kN Thrust, 9 kN Holding Force, Zinc Plated - Kukamet
Take advantage of robust performance, fast pneumatic actuation and reliable corrosion protection for consistent workholding in production and jigs. Benefit from compact mounting with a horizontal base and high holding capacity to reduce fixture downtime. Order the Pneumatic toggle clamp 681 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic toggle clamp 681 by Kukamet — horizontal base, zinc-plated finish The Pneumatic toggle clamp 681 is a pneumatic workholding device designed for secure fixture tasks where rapid, repeatable clamping and strong holding capacity are required. Zinc-plated finish for corrosion protection Horizontal base for secure bench mounting Pneumatic cylinder enables rapid clamping Max clamping force 2,500 N for firm fixation Holding force 9,000 N for safe workholding Faster cycle times through pneumatic actuation and defined forces The combination of a pneumatic cylinder and toggle geometry provides fast, repeatable actuation, which reduces cycle times in batch production and jig applications. With a max clamping force of 2,500 N and a holding force of 9,000 N, the device delivers clear, measurable performance that supports process reliability and part repeatability. The high holding capacity is particularly useful where vibration or secondary operations might otherwise unsettle the workpiece. The zinc-plated surface offers basic corrosion resistance, keeping the clamping surfaces serviceable in workshop environments and minimising unplanned maintenance. Robust design for secure fixtures and simplified integration The clamp’s horizontal base design allows stable bench or fixture mounting and simplifies alignment in existing tooling. The combination of lever-style mechanics and pneumatic drive results in a compact actuator with a predictable clamping stroke, making it suitable for repetitive production, assembly fixtures and inspection jigs. Because the device is zinc-plated, wear points are protected against surface corrosion, which supports longer uptime and steadier repeatability. The overall mass of 5.565 kg contributes to a solid feeling during operation while remaining manageable for fixture designers. Practical installation and straightforward upkeep for long service life Installation is straightforward: the horizontal mounting foot permits direct bolting to plates or tooling blocks at a right angle (90°), and the pneumatic actuation is compatible with standard compressed-air systems. Routine upkeep is limited to checking pneumatic connections and ensuring sliding or pivot surfaces remain clean; the protective finish reduces corrosion-related wear. For applications that demand consistent clamping force and fast cycles, this model integrates reliably into both small-series and medium-volume production setups, providing a balance between compact design and measurable holding performance. Contact Metav Werkzeuge in Emmerich to confirm mounting details and secure the Kukamet Pneumatic toggle clamp 681 for prompt delivery from stock. Technical Data Article number: 681-4 GTIN: 8680731506600 Brand: Kukamet Facts Max. clamping force: 2,500 N Max. holding force: 9,000 N Weight: 5.565 kg Angle: 90° Special features Material: Zinc-plated Mounting: Horizontal base Actuation: Pneumatic cylinder Model: 681 SKU: 681-4 FAQ What is the maximum clamping force of this clamp? The Kukamet Pneumatic toggle clamp 681 provides a maximum clamping force of 2,500 N and a holding force rated at 9,000 N. Can the clamp be mounted directly to a workbench or fixture plate? Yes; the horizontal base is designed for direct bolting to bench tops or fixture plates at a 90° orientation. Is the surface finish resistant to workshop conditions? The device is zinc-plated, which offers corrosion protection suitable for many workshop environments and helps extend service intervals. Which actuation media does the clamp require? The clamp uses a pneumatic cylinder and is compatible with standard compressed-air supplies; it is intended for integration with pneumatic control lines. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Horizontal Base, 6.5 kN Thrust, 30 kN Holding Force, Zinc-Plated - Kukamet
Gain dependable clamping performance by combining robust galvanised construction, pneumatic actuation and a holding force of 30,000 N; ideal for repeatable production cycles and secure fixture retention. Order the pneumatic clamp directly via Metav Werkzeuge or consult the technical team for integration advice. Pneumatic clamp 681-8 — Horizontal-base clamp with pneumatic cylinder by Kukamet The pneumatic clamp 681-8 is a horizontal-base industrial clamp designed for 90° workholding tasks, offering high holding capacity and pneumatic actuation for rapid, repeatable clamping in production environments Pneumatic cylinder actuation Horizontal base mount Holding force 30,000 N Galvanised steel corrosion resistance Reliable hold for serial production and safety-critical fixtures The unit delivers a holding force of 30,000 N combined with a maximum pressing force of 6,500 N, giving a measurable safety margin for many clamping tasks in metalworking and assembly. These numeric values translate directly into lower slippage risk and improved process stability, which helps reduce rework and scrap rates. Where consistent repeatability matters, the mechanical design ensures every cycle applies the same clamping effort, aiding quality assurance and predictable throughput in production lines. Faster cycles through pneumatic actuation and simple integration Equipped with a pneumatic cylinder, the clamp converts compressed air into reliable clamping movement, shortening cycle times compared with manual or mechanically driven options. The horizontal base configuration simplifies mounting to fixture plates or machine tables and supports compact station layout. At approximately 20.475 kg, the unit is robust enough for industrial use yet manageable for integration into jigs and automated cells. Pneumatic operation reduces operator effort and supports automation, resulting in measurable efficiency gains on the shop floor. Durable construction and low-maintenance operation for long service life Constructed from galvanised steel, the clamp resists corrosion in typical workshop atmospheres and demands minimal surface care. The lever-style concept translated into a pneumatically driven mechanism combines proven mechanical simplicity with modern actuation, lowering service needs. Routine inspection of seals and a light lubrication schedule for pivot points are usually sufficient to maintain performance over time. Supplied as an industrial-grade component, the unit is suitable for demanding environments where uptime and consistent clamping are priorities. For reliable, high-capacity clamping in production, contact Metav Werkzeuge to discuss supply and application support for the Kukamet pneumatic clamp 681-8 and bespoke integration options from our Emmerich facility. Technical Data SKU: 681-8 GTIN: 8680731506617 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Material: Galvanised Key figures Holding force: 30,000 N Pressing force (max): 6,500 N Weight: 20.475 kg Materials & special features Galvanised steel With pneumatic cylinder Horizontal foot mounting Lever-style clamp design FAQ Is the clamp suitable for heavy-duty workshop fixtures? Yes. The pneumatic clamp 681-8 provides a holding force of 30,000 N and a pressing force of 6,500 N, making it suitable for demanding fixture applications in metalworking and assembly. How is the unit mounted to a fixture or machine table? The clamp is mounted via a horizontal base (horizontal foot), which allows bolting to plates or tables for secure and repeatable positioning. Does the construction protect against corrosion? The component is galvanised, offering enhanced corrosion resistance for typical workshop environments and reducing the need for intensive surface maintenance. Can the clamp be integrated into existing pneumatic circuits? Yes. The clamp features a pneumatic cylinder that can be connected to standard compressed-air supplies; for exact connection details and required air parameters, refer to the product documentation or consult Metav Werkzeuge. What maintenance is required to ensure long service life? Periodic inspection of pneumatic seals, checking for secure mounting, and light lubrication of moving joints will maintain reliable operation and long service life for the clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Horizontal Foot, 4 000 N Cylinder Force, 18 000 N Holding Force, Zinc Plated - Kukamet
Take advantage of the combination of high holding force, fast pneumatic actuation and robust galvanised construction for reliable fixture clamping in production environments. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic Clamp 681 — Horizontal-base toggle clamp with pneumatic cylinder (Kukamet) The Pneumatic Clamp 681 is a pneumatic toggle clamp designed for secure workpiece holding in production fixtures, welding jigs and assembly lines. Pneumatic cylinder for fast actuation Horizontal foot for stable mounting Galvanised finish for corrosion resistance Secure clamping where stability matters The Pneumatic Clamp 681 delivers a clear mechanical advantage for demanding fixtures: a holding force of 18,000 N combined with an actuation force of 4,000 N gives both secure retention and energy-efficient operation. The distinct separation between actuation and holding forces means smaller pneumatic components can be used to generate reliable clamp pressure, reducing cycle times and compressed-air consumption. The 90° toggle geometry provides a positive locked position, limiting movement under vibration and improving repeatability on production runs. Designed for durable workshop use and straightforward mounting Constructed with a galvanised finish and a horizontal foot for mounting, this toggle clamp resists corrosion in workshop and shop-floor environments while offering a stable platform for fixture integration. The integrated pneumatic cylinder reduces manual effort and wear on mechanical linkages, which lowers maintenance intervals and keeps downtime to a minimum. At approximately 9.66 kg, the assembly balances robustness and handling for straightforward incorporation into modular jigs without excessive ballast. Efficient integration into fixtures and process improvement This clamp is suited to automated and semi-automated cells where consistent clamping force and repeatability improve throughput and quality. The pneumatic actuation provides quick actuation for short cycle times, while the toggle lock ensures parts remain stationary during machining, welding or inspection operations. Using a standardised clamp such as this simplifies spare-part management and reduces setup variation across multiple stations, supporting lean production and better first-pass yield. Contact Metav Werkzeuge for a tailored quotation, technical drawings and advice on integrating the Kukamet Pneumatic Clamp 681 into existing fixtures Technical data SKU: 681-6 GTIN: 8680731509908 Manufacturer: Kukamet Facts Weight: 9.66 kg Max actuation force: 4,000 N Max holding force: 18,000 N Toggle angle: 90° ECLASS: 21021004 ETIM: EC011973 Special features Galvanised material With pneumatic cylinder Horizontal foot mounting Category: Spanner FAQ What is the difference between actuation force and holding force for this clamp? Actuation force refers to the pneumatic force required to move the mechanism (listed as 4,000 N), while holding force is the clamping retention once locked (listed as 18,000 N) for the Kukamet Pneumatic Clamp 681. Can the clamp be mounted directly to a fixture plate? Yes. The clamp features a horizontal foot designed for secure mounting to fixture plates and modular tooling systems. Is the surface finish suitable for humid workshop environments? The galvanised finish provides corrosion resistance suitable for typical workshop conditions and helps extend component life. Which applications are best suited to this pneumatic toggle clamp? Typical applications include welding jigs, assembly lines and machining fixtures where fast, repeatable clamping and positive locking are required. Does the clamp require special pneumatic controls? No specialised controls are required; standard pneumatic valves and fittings are sufficient to operate the cylinder at the specified actuation force. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com