Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° Horizontal Clamp With 5,000 N Holding Force, Massive Arm, Zinc-Plated - Kukamet
Take advantage of the combination of a 229 mm arm, galvanised construction and a compact footprint for repeatable clamping in production and jig applications. Order the horizontal toggle clamp directly via Metav Werkzeuge or contact the consultants for specification support. Kukamet Horizontal toggle clamp »112« — 229 mm arm, galvanised The Horizontal toggle clamp 112 secures workpieces at a 90° clamping angle with high holding capability for fixtures and production tooling. Robust 229 mm arm for deep clamping reach Massive holding arm for long-term stability Galvanised finish for corrosion resistance 5,000 N holding force, 4,500 N clamping force Consistent clamping performance for reliable production The 229 mm arm and lever mechanism deliver a highly repeatable clamping action, reducing cycle-time variation on jigs and fixtures. With a 5,000 N holding force and 4,500 N clamping force, the unit separates static holding capacity from initial clamping pressure, ensuring that once set the workpiece remains secure during machining or assembly. The compact mass and efficient toggle geometry allow rapid engagement and disengagement, supporting faster throughput without compromising stability. The robust mechanism is suited to repetitive tasks where predictable force and quick operation are decisive for process reliability. Durable construction reduces maintenance and downtime A galvanised finish and a massive holding arm combine to extend service life in workshop environments. The galvanised surface provides corrosion resistance where occasional moisture or workshop contaminants are present, while the solid arm construction limits flex under load and preserves alignment over time. At a mass of 1.6 kg, the unit balances solidity with easy handling during installation. The base is designed for a vertical foot mounting, creating a secure 90° interface that integrates cleanly into clamps, fixtures or bespoke jigs and minimises the risk of movement under lateral loads. Practical mounting and performance that supports diverse workflows Designed for repetitive clamping tasks, the clamp offers a defined 90° clamping position and accepts quick incorporation into standard fixture plates via the vertical foot. The lever action gives tactile feedback and reliable lock-up for manual and semi-automated stations, reducing set-up times and supporting operator confidence. The compact dimensions and clear force ratings simplify specification: choose this model where a long reach, robust retention and corrosion-resistant finish are required. The product’s measured parameters support informed decisions when matching a clamp to fixture geometry and expected load cases. Contact Metav Werkzeuge for tailored advice on integrating this Kukamet clamp into production tooling; call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt specification support and procurement guidance Technical Data SKU: 112-5-D-C3 GTIN: 8680731500677 Model: Horizontal toggle clamp 112 Facts Arm length: 229 mm Weight: 1.6 kg Holding force: 5,000 N Clamping force: 4,500 N Clamping angle: 90° Special features Material: galvanised Mounting: vertical foot Massive holding arm eClass: 21041719 ETIM: EC011973 FAQ What is the difference between holding force and clamping force? The holding force refers to the sustained retention capacity (5,000 N) while the clamping force (4,500 N) indicates the initial pressure applied during engagement on the Horizontal toggle clamp 112 Can the clamp be mounted on plates and jigs? Yes, the vertical foot design allows direct plate mounting and straightforward integration into jigs and fixture assemblies Is the finish suitable for humid workshop environments? The galvanised finish on this Kukamet clamp provides corrosion resistance suitable for typical workshop conditions What are typical applications for this clamp? The clamp is intended for fixture work, assembly jigs and production tooling where a long reach and secure, repeatable clamping are required; the SKU is 112-5-D-C3 for ordering How compact is the clamp for tight fixture layouts? With a 229 mm arm and a weight of 1.6 kg, the clamp offers a long reach while maintaining a compact footprint for confined fixture spaces Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 5 000 N Holding Force, 4 500 N Closing Force, 229mm Arm, Zinc Plated, Heavy-Duty Arm & Safety Lock - Kukamet
The combination of a massive holding arm, a secure safety lock, and a galvanised finish ensures reliable clamping with low maintenance demands; use this robust solution to keep jigs and fixtures stable and productive. Order the clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Horizontal clamp 112 by Kukamet — galvanised lever clamp with 4,500 N clamping force A Horizontal clamp 112 for fixed installation with a vertical base, engineered to provide secure 90° holding for jigs, fixtures and repetitive assembly tasks. Massive 229 mm holding arm Safety lock for vibration protection Galvanised finish for corrosion resistance Vertical base for 90° fixed mounting Reliable clamping for consistent workflows The clamp delivers measured holding and clamping values that support reproducible production steps: 4,500 N clamping force and 5,000 N maximum holding force reduce part movement during machining or assembly. The lever action converts operator input into a strong, repeatable clamping load, cutting cycle variability. The integrated safety lock prevents accidental release under vibration or inertia, improving process reliability and reducing rejects in batch work. Durable construction for workshop conditions Constructed from galvanised steel with a massive holding arm, the unit resists surface corrosion and stands up to daily workshop use with minimal upkeep. The 229 mm arm length provides good reach into fixtures while maintaining rigidity, and the overall mass of 1.42 kg balances portability with solidity. The plated finish simplifies cleaning and helps preserve clamping accuracy over time, lowering life-cycle effort and supporting continuous operation in industrial environments. Easy mounting and straightforward integration into fixtures Designed for installation on a vertical base, the clamp fixes at a 90° working angle to suit standard jig plates and assembly frames. The compact footprint and lever-style actuation make it suitable for tight layouts and repetitive handling stations. Supplied with a clear SKU and traceability for procurement, the component fits typical workholding patterns and streamlines assembly preparation. Metav’s supply chain ensures steady availability from Emmerich for production replenishment and replacement parts. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal clamp 112 into existing fixtures and securing timely delivery from Emmerich. Technical data Article number: 112-5-D-L-C3 GTIN: 8680731500707 Manufacturer: Kukamet Facts Clamping force (max): 4,500 N Holding force (max): 5,000 N Arm length: 229 mm Weight: 1.42 kg Angle: 90° Special features Material: galvanised Mounting: vertical base Massive holding arm Safety locking mechanism Category: Spanner eCl@ss: 21041719 ETIM: EC011973 FAQ What clamping capacity does the clamp offer? The clamp provides a clamping force of 4,500 N and a maximum holding force of 5,000 N, suitable for many industrial jigs and fixtures. Is the clamp suitable for workshop environments with humidity or light exposure? Yes, the galvanised finish increases corrosion resistance and suits standard workshop conditions, extending service life. How is the clamp mounted to a fixture plate? The unit is designed for fixed installation on a vertical base at a 90° working angle, compatible with common jig plates and assembly frames. Does the clamp include a safety feature to prevent accidental opening? A mechanical safety lock is integrated to secure the lever in the closed position and prevent unintended release under vibration. Which product identification should be used when ordering spare parts? Refer to SKU 112-5-D-L-C3 and GTIN 8680731500707 to ensure correct ordering and traceability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 66mm Arm, Massive Holding Arm And Safety Lock, 1,200N Hold Force - Kukamet
Take advantage of a compact, heavy-duty clamping solution that combines a massive holding arm, a safety locking mechanism and clear force specifications for predictable fixture retention. Order the clamp via Metav Werkzeuge for reliable delivery and expert consultation from an established precision partner. Horizontal lever clamp 111 — heavy-duty horizontal clamp with 90° hold and safety lock The Horizontal lever clamp 111 is a horizontal clamping device for production and workshop jigs, designed to secure workpieces at a right angle with a compact footprint Heavy-duty holding arm Safety locking mechanism Clamping force up to 1,000 N Compact 66 mm arm length Secure retention through defined clamping and holding figures The clamp delivers a clamping force of 1,000 N and a holding force of 1,200 N, values that give clear, comparable performance when selecting clamps for fixtures and jigs. These figures describe the effective compressive push during actuation and the continuous retention capacity once engaged. Measured force values reduce trial-and-error in set-up planning and support predictable cycle times on production lines. The presence of a safety lock prevents unintended release, improving operator safety and reducing the risk of lost parts or rework. Compact mounting that preserves workspace and improves throughput With an arm length of 66 mm and a horizontal-foot mounting, the clamp integrates into tight assemblies and modular tooling with little overhang. Its small mass (approx. 0.2 kg) keeps added inertia low on moving fixtures and simplifies retrofitting into existing jigs. The 90° clamping orientation is suited to vertical workpiece faces and bracket assemblies, enabling quicker part loading and unloading and therefore higher throughput per shift. The compact design helps to keep the clamping station organised and accessible for fast adjustments. Robust finish and construction for dependable daily use Constructed with a blackened finish and a massive holding arm, the device resists common workshop wear and presents a low-maintenance interface. The blackened surface reduces glare and offers basic corrosion resistance where oil and coolant exposure occur. The lever-style actuation provides tactile feedback during engagement and the incorporated safety locking mechanism gives long-term retention reliability. For metalworking and general assembly jigs, this clamp is a practical choice where consistent repeatability and simple mechanical operation are required. Contact Metav Werkzeuge for specification matching and immediate ordering—Metav Werkzeuge handles European distribution from Emmerich and can advise on integration and quantities; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: B111-2-D-L-C1 Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Clamping force: 1,000 N Holding force: 1,200 N Arm length: 66 mm Angle: 90° Weight: 0.2 kg Horizontal foot mounting Massive holding arm Safety locking mechanism Blackened finish FAQ What is the maximum clamping force and how is it specified? The maximum clamping force is 1,000 N; the specification refers to the nominal actuation force provided when the clamp is engaged on the Horizontal lever clamp 111 (SKU B111-2-D-L-C1). Can the clamp be mounted in confined jig spaces? Yes, the compact 66 mm arm and horizontal foot mounting make the clamp suitable for tight fixtures and constrained assembly areas. Is the finish resistant to workshop conditions? The clamp features a blackened finish that offers basic protection against corrosion and wear in typical workshop environments. Does the device include a safety feature to prevent accidental release? A mechanical safety locking mechanism is integrated to secure the lever in the closed position and prevent unintentional opening. Which applications is this clamp intended for? Designed for fixture and jig clamping at 90°, it is suitable for general assembly, metalworking jigs and production tooling that require repeatable retention. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 850 N Clamping Force, Zinc Plated - Kukamet
Robust galvanised construction, a compact 0.125 kg body and up to 1,000 N holding force deliver dependable fixing for light‑duty jigs and fixtures. Order the Horizontal clamp 111 directly via Metav Werkzeuge or consult our specialists for help selecting the right clamping solution. Horizontal clamp 111 — Kukamet horizontal lever clamp, galvanised, 1,000 N holding force The Horizontal clamp 111 is a compact horizontal lever clamp for secure mounting in production fixtures and workshop jigs, offering a 90° lever position and a galvanised finish for corrosion resistance. Galvanised for corrosion resistance Holding force up to 1,000 N Compact weight: 0.125 kg Horizontal base for 90° mounting Consistent hold where it matters The clamp provides a defined clamping force of 850 N and a maximum holding force of 1,000 N, which ensures steady retention of small workpieces in repeat operations. These forces are achieved through a simple, mechanical lever design that transfers the actuation into a reliable securing action. The result is reduced setup variation and fewer reworks in assembly or light machining tasks, as the component remains fixed once the lever is engaged. Compact design that integrates easily A low mass of 0.125 kg and a horizontal base mounting mean the unit is easy to fit into confined fixtures and tight layouts without adding significant inertia. The M5x35 pressure spindle offers a standardised contact point that can be adjusted for slight height differences or fitted with protective pads if surface protection is required. The 90° lever position allows clear access for actuation while keeping the clamp profile low, simplifying layout planning for jigs and assembly stations. Built for routine workshop use Constructed from galvanised material, the clamp resists surface corrosion in typical workshop environments, supporting long service life with minimal upkeep. The tool's simple geometry and lack of complex moving parts reduce maintenance demands and allow for quick replacement if required. As a lever clamp from Kukamet, it is suitable for light‑to‑medium fixture tasks where repeatable mechanical securing is needed and where space and weight are limiting factors. For reliable clamping with a galvanised finish choose the Kukamet Horizontal clamp 111 — order via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice Technical data Article number: 111-1 GTIN: 8680731500035 EClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Holding force: 1,000 N Clamping force: 850 N Weight: 0.125 kg Angle: 90° Pressure spindle: M5x35 Special features Material: galvanised Mounting: horizontal base Lever clamp design Arm: not applicable Special features: none FAQ What materials is the clamp suitable for? The Horizontal clamp 111 is a general‑purpose lever clamp; material compatibility depends on fixture design and contact pads — the unit itself is galvanised for corrosion resistance. How is the clamp mounted in a fixture? Mounting uses the horizontal base; the clamp is designed for horizontal installation with a 90° lever orientation for straightforward integration in jigs and fixtures. What adjustment options are available for contact pressure? Adjustment is made via the M5x35 pressure spindle, enabling fine setting of the contact point and compensation for small height differences. Is the clamp suitable for heavy machining tasks? The clamp provides up to 1,000 N holding force and is intended for light‑to‑medium securing tasks; for heavier machining, a higher‑capacity clamping system should be considered. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 850 N Thrust, 1,000 N Holding Force, M5x35 Spindle, Black Oxide - Kukamet
Secure production with compact fixtures thanks to the combination of a 1,000 N holding force, 850 N clamping force and an angled-foot mounting that keeps set-ups stable. Order the clamp directly via Metav Werkzeuge or consult our advisors for integration support. Horizontal clamp 113 — angled-foot, 90° lever clamp with M5x35 spindle (Kukamet) A robust Horizontal clamp 113 engineered for 90° clamping tasks in jigs and fixtures, offering compact dimensions and precise adjustment for repeatable set-ups Angled-foot mounting for 90° positioning Holding force 1,000 N for secure clamping Pressure spindle M5x35 for fine adjustment Blackened finish for corrosion resistance Stable workholding that reduces rework The holding force of 1,000 N combined with a clamping force of 850 N delivers consistent retention for small to medium fixtures, reducing vibration and slippage during machining or assembly. This reliability translates directly into fewer rejects and less rework; the clamp’s force values are intended as design parameters for engineers planning fixture loads and safety factors. The described performance supports precision workflows where repeatability is essential. Compact design for efficient integration With an angled-foot mounting and a compact mass of 0.155 kg, the clamp integrates easily into modular jig plates and assembly rigs, occupying minimal space on the workbench. The 90° operating angle suits lateral clamping needs and permits close-packed arrangements of multiple clamps. The included M5x35 pressure spindle enables micro-adjustment of contact pressure, allowing calibration of the clamp’s point load without additional shims or spacers. Durable finish and straightforward maintenance The blackened finish gives basic corrosion protection and low reflectivity for machine‑vision environments, while simple cleaning preserves function over prolonged use. The clamp’s mechanical principle is accessible for workshop technicians: the spindle sets the contact pressure and the lever locks the arm, creating a predictable clamp travel and repeatable seating. Minimal maintenance—occasional lubrication and inspection—keeps the device serviceable with little downtime. For compact, reliable clamping with the Kukamet Horizontal clamp 113, contact Metav Werkzeuge in Emmerich for specification advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B113-1 GTIN: 8680731507379 Manufacturer: Kukamet Facts Holding force: 1,000 N Clamping force (max): 850 N Weight: 0.155 kg Operating angle: 90° Pressure spindle: M5x35 Special features Material/finish: blackened finish Mounting: angled-foot Arm: not applicable SKU: B113-1 FAQ What clamping and holding forces does the clamp provide? The clamp offers a clamping force of 850 N and a holding force of 1,000 N, values intended for secure workholding in fixture and assembly applications. How is the clamp mounted to a fixture plate? Mounting is via an angled-foot arrangement that allows secure bolting at 90° orientation for compact fixture layouts. How is contact pressure adjusted on the clamp? Contact pressure is adjusted with the M5x35 pressure spindle, enabling fine tuning of the clamp point without additional parts. What finish does the clamp have and what maintenance is required? The clamp features a blackened finish providing basic corrosion resistance; periodic cleaning and light lubrication of moving parts is recommended. Which SKU identifies this model for ordering? The model is listed as SKU B113-1, sold under the Kukamet brand for compact horizontal clamping tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 93mm Arm, 850N Closing Force, Galvanised Massive Holding Arm - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a massive holding arm with reliable holding force for consistent jig work; order the item directly via Metav Werkzeuge or contact our consultants for application advice. 112 Horizontal toggle clamp by Kukamet — galvanised, 1,000 N holding force 112 is a horizontal clamp for secure workholding in jigs and fixtures, designed for repetitive clamping tasks where a robust arm and corrosion resistance are required Robust galvanised construction Massive 93 mm holding arm Holding force 1,000 N Vertical-foot mounting for stability Consistent clamping force for repeatable production The clamp delivers measurable performance through a holding force 1,000 N and a closing force 850 N, values that ensure components remain fixed during machining, welding or assembly operations. As a compact toggle clamp, it converts manual actuation into dependable clamping pressure, reducing cycle-time variability and supporting process stability in small-batch and series production. The mechanical action is straightforward to integrate into custom fixtures, offering an efficient solution where repeatability matters. Durable construction reduces maintenance and downtime Constructed from galvanised steel with a massive holding arm, the device resists surface corrosion while maintaining structural rigidity under load. The robust build minimises deformation and extends service intervals compared with lighter designs, translating to fewer replacement cycles and lower indirect costs for the workshop. The lightweight overall mass also keeps additional load on fixturing low while the plated finish supports a long service life in standard workshop environments. Fast, accurate installation for stable jigs and fixtures A vertical foot mounting provides a compact footprint and secure anchorage, while the right-angled geometry at 90° supports precise positioning relative to the workpiece. The 93 mm arm length gives a practical reach for many common clamping tasks, allowing easy engagement with parts of varying sizes without sacrificing clamp leverage. Clear mechanical travel and defined clamping points simplify alignment during setup, so fixtures remain consistent from one cycle to the next. For workshop-ready workholding with the Kukamet 112 horizontal clamp, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability and delivery options Technical data Article number: 112-1-D-C2 GTIN: 8680731501292 Type: Horizontal clamp Brand: Kukamet Facts Arm length: 93 mm Closing force: 850 N Holding force: 1,000 N Angle: 90° Weight: 0.136 kg SKU: 112-1-D-C2 Special features Material: galvanised Mounting: vertical foot Massive holding arm Category: Clamp FAQ What holding and closing forces does this clamp provide? The Kukamet 112 horizontal clamp provides a holding force of 1,000 N and a closing force of 850 N, values suitable for stable workholding in jigs and fixtures. How is the clamp mounted to a fixture? Mounting is via a vertical foot; the design secures the clamp at a 90° orientation for compact and repeatable fixture integration. What is the arm reach and why does it matter? The arm reach is 93 mm; this provides practical access to a variety of part sizes while maintaining effective leverage for reliable clamping. Is the clamp suitable for use in workshop environments? The galvanised finish and massive holding arm give the clamp enhanced durability for typical workshop conditions and frequent operation by hand. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Angle Base, 850 N Thrust, 1 000 N Holding Force, Zinc Plated - Kukamet
Stable 90° clamping combined with a galvanised steel body and up to 1,000 N holding force ensures dependable fixture for light assembly and jigs; order the Horizontal clamp 113 directly via Metav Werkzeuge or request guidance from our technical consultants. Horizontal clamp 113 — horizontal toggle clamp, galvanised, 90° angle base (Kukamet) Horizontal clamp 113 designed for secure 90° positioning in light assembly, jig and fixture applications, offering compact dimensions and reliable holding performance *Galvanized steel construction *90° mounting with angle base *Holding force up to 1,000 N *M5x35 pressure spindle included Consistent clamping performance for light production The horizontal toggle design delivers a controlled, repeatable clamping action that suits assembly, inspection and small-batch production. The device provides a clamping force of 850 N and a holding force of 1,000 N; the first figure denotes the force applied during engagement, while the second indicates the maximum static retention the clamp can sustain without slippage. This distinction matters when planning fixture layouts and sequencing operations, because higher holding force reduces repositioning and increases process reliability. The compact mass and mechanical simplicity mean quick cycle times and low maintenance requirements, preserving uptime on shop-floor tooling and fixtures. Durable finish and flexible mounting for workshop use Constructed in galvanised steel, the clamp resists corrosion where occasional moisture or coolant exposure occurs, extending service life in busy work environments. The angle base (Winkelfuß) provides a firm 90° mounting interface, allowing integration into jigs, plates or tooling blocks with minimal adaptation. At just 0.155 kg, the component is lightweight enough for modular fixtures yet robust enough for repeated actuation. The combination of finish and form factor supports both portable jigging and permanent fixture installations, making the part suitable for both maintenance workshops and production benches. Practical installation and adjustment explained Adjustment is performed via the M5x35 pressure spindle, which enables fine positioning of the contact point and straightforward replacement if wear occurs. The clamp does not include an additional lever arm, keeping the profile low and the mechanism simple to service. For design engineers planning fixture interfaces, the compact body and right-angle mount simplify CAD incorporation and reduce interference with adjacent tooling. Supplied by Kukamet and distributed by Metav Werkzeuge, the component benefits from established quality control and wide availability across spare parts and complementary fastening items. For dependable 90° clamping with galvanised durability, contact Metav Werkzeuge for supply or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 113-1 GTIN: 8680731500721 ECLASS: 21041719 ETIM: EC011973 Core specifications Holding force: 1,000 N Clamping force: 850 N Weight: 0.155 kg Angle: 90° Materials & features Material: galvanised steel Fixing type: angle base Pressure spindle: M5x35 Brand: Kukamet FAQ What materials can be clamped with this toggle clamp? The clamp is suitable for general workshop materials; its galvanised body and holding capacity make the Horizontal clamp 113 appropriate for many light-metal and composite fixtures. How does clamping force differ from holding force? Clamping force (850 N) refers to the action during engagement; holding force (1,000 N) is the static retention capacity of the clamp under load when closed on a workpiece. How is the spindle adjusted and replaced? Adjustment is via the M5x35 pressure spindle, which can be rotated for fine contact-point positioning and replaced using standard M5 tools if renewal is required. Can the clamp be mounted to jigs and plates at 90°? Yes, the angle base offers a 90° mounting interface intended for direct fastening to plates, blocks or jigs, simplifying integration in fixture assemblies. Is the clamp suitable for frequent actuation? The simple toggle mechanism and galvanised finish support frequent actuation in light to moderate duty cycles typical of assembly and inspection tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Angle Foot, Zinc Plated, 1,000 N Thrust / 1,200 N Hold - Kukamet
Galvanised construction, a compact 0.27 kg body and up to 1,200 N holding force provide dependable, repeatable clamping for jigs and fixtures. Order the horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — galvanised angle-base clamp with 1,200 N holding force (Kukamet) The horizontal clamp 113 is a compact angle-base lever clamp designed for secure fixture in jigs, fixtures and general workshop applications where consistent holding force and a small footprint are required. Galvanised steel construction Holding force 1,200 N Clamping force up to 1,000 N Angle base, 90° orientation Reliable clamping for repetitive production tasks The compact lever clamp delivers consistent holding force across repeated cycles, ensuring components remain steady during machining or assembly. Constructed from galvanised steel, the unit resists corrosion in workshop environments while remaining lightweight at 0.27 kg, making it suitable for modular jigs and mobile fixtures. The combination of a clearly specified holding force of 1,200 N and a maximum clamping force of 1,000 N supports predictable process stability and reduces the need for frequent rework, helping to maintain throughput in production or repair workflows. Simple integration and secure mounting for fixtures Designed with an angle base (Winkelfuß) and a 90° orientation, the clamp accommodates standard fixture plates and allows straightforward positioning in complex assemblies. The M6x40 pressure spindle gives adjustable contact pressure and straightforward replacement if needed. Where interchangeability and repeatable setup matter, this compact clamp fits quickly into existing tooling layouts and can be mounted with common fasteners, limiting downtime during changeovers. Clear numeric specifications aid planners in selecting the right clamping force for a given task without trial-and-error. Practical benefits for workshop and light industrial use Beyond the technical data, the device offers operational benefits: reduced fixture weight, corrosion protection from the galvanised finish and a small footprint that supports denser tool layouts. The plain design means low-maintenance operation and uncomplicated inspection routines, while the defined force ratings support engineering calculations for safe clamping. For shops and suppliers seeking dependable, entry-level clamping with transparent performance metrics, this lever-style horizontal clamp is a pragmatic choice that balances durability and simplicity. Choose the Kukamet horizontal clamp 113 for consistent clamping performance; contact Metav Werkzeuge for procurement advice and fast delivery from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 113-2 GTIN: 8680731500745 Manufacturer: Kukamet Facts Holding force: 1,200 N Clamping force (max): 1,000 N Weight: 0.27 kg Angle: 90° Pressure spindle: M6x40 Special features Material: galvanised Mounting: angle base SKU: 113-2 No special features FAQ What materials is this clamp suitable for? The Kukamet horizontal clamp 113 is a general-purpose lever clamp; its galvanised steel construction is suitable for typical workshop materials and fixtures rather than specific workpiece materials. How is the clamp mounted in a fixture? Mounting is by an angle base (90°); the clamp is designed for secure attachment to fixture plates using common fasteners compatible with the base geometry. What is the difference between holding force and clamping force here? Holding force (1,200 N) indicates the static retention capability, while clamping force (1,000 N) refers to the maximum adjustable pressure applied via the pressure spindle M6x40 on the clamp. Is the pressure spindle replaceable? Yes, the pressure spindle specified as M6x40 can be adjusted or replaced as part of routine maintenance to restore correct contact pressure. Can the clamp be used outdoors or in humid conditions? The galvanised finish improves corrosion resistance compared with bare steel, offering increased durability in humid workshop environments, though long-term outdoor exposure should be evaluated for specific conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With M5x35 Plunger, 850 N Closing Force, Stainless Steel - Kukamet
Take advantage of robust stainless‑steel construction, a compact form factor and reliable clamping performance to keep fixtures secure with minimal setup time. Order the horizontal clamp directly via Metav Werkzeuge or consult the specialists for application advice. Horizontalspanner 111 — Horizontal clamp in stainless steel with 850 N clamping force The 111 horizontal clamp by Kukamet is a compact toggle clamp for secure fixture and jig workholding in production and assembly environments. Horizontal clamp "111" by Kukamet, stainless steel Clamping force up to 850 N Holding force up to 1,000 N Horizontal foot mount, 90° lever position Secure, corrosion‑resistant clamping for dependable throughput The compact design delivers robust workholding without excessive mass: constructed from stainless steel, the clamp resists corrosion while remaining lightweight (0.125 kg) for flexible fixture layouts. The specified 850 N clamping force and 1,000 N holding force provide quantifiable retention; these figures indicate the maximum force transmitted during actuation and the static load the device can sustain respectively. For production planners, this translates into predictable part retention under repeatable cycle conditions and reduced rework due to workpiece movement. Quick mounting and precise adjustment to save assembly time A horizontal foot mount and a lever set at 90° permit low‑profile installation onto plates and modular tooling systems, keeping adjacent components accessible. The integrated spindle specified as M5x35 allows fine adjustment of contact pressure and compensates for part tolerances without additional shims. These mechanical choices shorten fixture changeover and reduce setup time, improving line efficiency and machine availability in cell‑based manufacturing. Compact footprint with industrial durability for varied workstations The toggle mechanism offers a compact footprint suitable for tight jigs and confined fixtures while maintaining industrial durability. The combination of corrosion‑resistant material and a straightforward mechanical design yields low maintenance intervals and long service life under normal workshop conditions. The clamp’s modest mass and form factor make it compatible with both bench‑level assemblies and machine‑mounted workholding solutions, enabling consistent clamping in repetitive operations. Practical fit: predictable performance and straightforward integration Specification clarity—material, forces, spindle dimensions and mounting type—simplifies component selection for engineers and buyers when integrating clamp elements into larger assemblies. The robust specification supports rational decisions based on measurable performance rather than subjective claims, aiding procurement and production planning. For further technical clarification, Metav Werkzeuge can supply detailed drawings and compatibility advice to ensure seamless integration into existing tooling. Contact Metav Werkzeuge for tailored advice and fast supply from Emmerich—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss fixture requirements and delivery options Technical data Article number: S111-1 GTIN: 8680731503920 Model: 111 Facts Clamping force: 850 N Holding force: 1,000 N Weight: 0.125 kg Angle: 90° Spindle: M5x35 Special features Material: stainless steel Mounting: horizontal foot Type: horizontal clamp eClass: 21041719 ETIM: EC011973 Special features: none FAQ What does the 850 N clamping force mean in practice? The 850 N value indicates the maximum dynamic force applied by the clamp during actuation; in the 111 horizontal clamp it defines the peak retention capacity for securing components during machining or assembly. How is the clamp mounted and what does horizontal foot mean? The clamp installs via a horizontal foot which is fastened to a fixture plate or base; the 90° lever orientation keeps the actuator parallel to the mounting surface for compact integration. Can the clamping contact be adjusted for different workpiece thicknesses? Yes, the M5x35 spindle provides micrometric adjustment of the contact face, enabling compensation for varying part heights without additional shims. Is the clamp suitable for use in corrosive workshop environments? Constructed from stainless steel, the clamp offers enhanced resistance to corrosion compared with standard steels, making it suitable for general workshop and assembly settings where moderate exposure may occur. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive 143mm Holding Arm, 850N Closing Force, 1,000N Holding Force, Blackened - Kukamet
Take advantage of a compact, durable clamping solution that combines a massive holding arm with a horizontal foot for stable mounting; the result is reliable repeatability and efficient bench workflows. With up to 1,000 N holding force and a compact 143 mm arm, this clamp supports secure set-ups across metalworking and assembly tasks. Order the horizontal clamp directly via Metav Werkzeuge or ask the consultants for tailored advice. Kukamet Horizontal clamp 111 — compact lever clamp with 1,000 N holding force Horizontal clamp 111 is a lever-actuated, bench-mounted clamp designed for workshop and industrial fixturing; it secures components at a right angle for stable machining and assembly operations. Massive holding arm for rigid clamping Horizontal foot for secure bench mounting Holding force up to 1,000 N Blackened finish for wear resistance Reliable clamping performance for repetitive tasks The clamp delivers consistent, measurable performance thanks to its holding force specification and robust lever mechanism. Rated at 1,000 N holding force with a maximum pressing force of 850 N, it enables precise retention of workpieces during machining, inspection or assembly cycles. The combination of defined force values and a rigid lever means set-ups can be standardised, reducing variation between runs and improving throughput. For novices, this translates into fewer re-clamps and less scrap, while experienced technicians gain a dependable, repeatable fixture element. Rugged construction and straightforward mounting Constructed with a massive holding arm and finished in a blackened finish, the device resists everyday workshop wear while maintaining a compact footprint. The horizontal foot mount provides a secure interface to a workbench or fixture plate, allowing the clamp to bear lateral loads at a 90° angle. The arm length of 143 mm offers practical reach without excessive leverage that could destabilise the set-up. Parts and toolmakers will appreciate the simple mechanical design that reduces maintenance and avoids reliance on pneumatics or hydraulics for basic clamping tasks. Versatile across fixturing and light machining applications This horizontal lever clamp is suitable for a wide range of workshop applications, from general fixturing to light-duty machining operations where a reliable mechanical hold is required. The compact mass and low weight support flexible placement in modular jigs, while the clear force ratings allow planners to match the clamp to the specific load case. The unit’s straightforward function—lock, hold, release—makes it well suited to repeat operations on small to medium components, contributing to faster set-up times and a more predictable production flow. For robust, repeatable clamping solutions from Kukamet, contact Metav Werkzeuge to discuss the Horizontal clamp 111 and its integration into existing fixtures and benches Technical data SKU: B111-1-D-C3 GTIN: 8680731506938 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 0.152 kg Arm length: 143 mm Angle: 90° Holding force max: 1,000 N Pressing force max: 850 N Special features Horizontal foot mounting Massive holding arm Blackened finish Compact lever clamp design Category: Clamps Version: 111 FAQ What maximum holding force does the clamp provide? The clamp offers a maximum holding force of 1,000 N, which is suitable for many workshop fixturing tasks where stable retention is required. Can the clamp be mounted on a standard bench or fixture plate? Yes. The horizontal foot design allows secure attachment to workbenches and fixture plates, providing a rigid base for the lever-action clamp. Is the finish suitable for industrial environments? The unit features a blackened finish that improves surface wear resistance and helps protect against everyday workshop abrasion. What is the reach of the clamp arm? The clamp is fitted with an arm length of 143 mm, offering practical reach for small to medium components without excessive lever-induced motion. Is this clamp suitable for automated or high-speed production? The clamp is a mechanical lever device intended for manual or semi-automated fixturing; it is best used where robust, repeatable mechanical clamping is required rather than full automated actuation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive 167mm Arm, 5 000 N Holding Force, Zinc Plated - Kukamet
Benefit from a robust combination of galvanised construction, a 167 mm heavy-duty arm and a standout 5,000 N holding force for dependable clamping in repetitive production tasks. Secure supply and expert advice are available from Metav Werkzeuge; order the component directly via Metav or consult the technical team for application support. Horizontal clamp 113 — horizontal lever clamp with 5,000 N holding force (Kukamet) Horizontal clamp 113 is a horizontal lever clamp designed for secure fixture work in jigs and assembly stations, providing strong holding capacity at a right angle. Galvanised steel construction 5,000 N maximum holding force 4,500 N clamping power Angled-foot mounting for secure fit Durable clamping where repeatability matters The clamp delivers consistent holding strength thanks to a rated 5,000 N holding force and a 4,500 N clamping force, which are specified values for static retention and active clamping respectively. These figures indicate that the device will keep fixtures immobile under load and provide sufficient closing power for most light-to-medium assembly tasks. The 167 mm arm provides reach while maintaining leverage, reducing the need for frequent repositioning. By choosing a lever-style horizontal clamp, workshop processes gain repeatable fixture positioning and reduced rework, which supports higher throughput and predictable quality. Stable mounting and precise alignment for fixtures Mounting via the supplied angled-foot creates a compact, low-profile connection to base plates or jigs and supports the specified 90° operating angle, ensuring the clamp works reliably in right-angled arrangements. The model’s massive holding arm transfers forces directly into the fixture, decreasing deflection during clamping. For engineers and technicians this translates into accurate part registration and fewer alignment checks, improving cycle-time stability on assembly lines and manual workstations alike. Corrosion resistance and low-maintenance operation Constructed from galvanised steel, the clamp is finished to resist corrosion in workshop environments, extending service life and maintaining consistent performance with minimal upkeep. At a weight of 1.808 kg, the unit is robust yet manageable for assembly into fixtures or tooling plates. The simple lever mechanism is suited to repetitive operation and requires only routine inspection rather than complex maintenance. For operations that seek dependable components with straightforward integration, this clamp offers a balance of durability and ease of use that supports long-term uptime. For application-specific advice or to arrange supply of the Kukamet horizontal clamp, contact Metav Werkzeuge in Emmerich for precise recommendations and dependable logistics from stock — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com. Technical data Article number: 113-5-D-C2 GTIN: 8680731501025 Brand: Kukamet Material: Galvanised Weight: 1.808 kg Facts Holding force: 5000 N Clamping force (max): 4500 N Arm length: 167 mm Operating angle: 90° SKU: 113-5-D-C2 eClass: 21041719 ETIM: EC011973 Special features Mounting: Angled foot Massive holding arm Story trigger: lever clamp Category: Spanner FAQ What is the difference between holding force and clamping force? Holding force denotes the maximum static retention (here 5,000 N); clamping force is the active closing force during engagement (4,500 N) for the horizontal clamp 113. Can the clamp be mounted on a custom jig plate? Yes, the angled-foot mounting is suitable for secure attachment to jig plates and fixture bases designed for right-angled clamps. Is the surface treatment suitable for humid shop floors? The galvanised finish provides corrosion resistance appropriate for standard workshop environments; it reduces the need for frequent surface treatment. What is the arm reach and how does it affect fixture design? The arm length is 167 mm, which gives extended reach for many fixture layouts while preserving mechanical leverage for secure clamping. Which industries or applications suit this clamp? The clamp is appropriate for assembly, fixture building, small-batch production and repair workshops that require reliable, repeatable horizontal clamping. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive 43mm Arm, 850N Thrust 1000N Hold, Blackened Finish - Kukamet
Combine compact dimensions with robust clamping performance to keep fixtures secure and cycle times consistent; the combination of a massive holding arm and clear force ratings supports reliable production. Order the Kukamet Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Horizontal clamp 112 – horizontal lever clamp with massive arm and vertical-foot mounting Kukamet Horizontal clamp 112 is a horizontal lever clamp designed for integration into jigs, fixtures and assembly equipment, providing secure holding with a compact footprint. Massive holding arm for stable clamping 1000 N holding force for secure fixtures 850 N pressing force for repeatable cycles Blackened (blued) corrosion-resistant finish 43 mm arm length for compact integration Engineered clamping performance for consistent production The clamp delivers clearly specified forces: a holding force of 1000 N and a pressing force of 850 N, which ensures reproducible results in repetitive tasks. Holding force refers to the maximum static load the clamp sustains without slip, while pressing force indicates the peak clamping pressure during engagement. These numerical specifications allow planners and production engineers to match the device precisely to fixture requirements and to calculate safety margins. The measurable values reduce uncertainty in procurement and support efficient layout planning for assembly lines. Robust construction that fits into tight setups Built with a massive holding arm and a blackened (blued) finish, the clamp combines durability with low visual glare—helpful where reflective surfaces impair visual inspection. The vertical-foot base means the unit is mounted with a vertical foot, which simplifies integration into plates and bases used in tooling and fixture systems. Despite the solid construction, the component remains light at 0.114 kg, enabling compact tool nests without adding unnecessary mass. The result is a practical balance between strength and space efficiency that supports both manual and semi-automated operations. Designed for jig, fixture and repetitive assembly tasks As a lever clamp with a 43 mm arm and a fixed 90° operating angle, the device is suited to repetitive clamping cycles in production and workshop environments. The lever-style actuation gives quick engagement and reliable repeatability, reducing setup time between operations. Where short overhangs and confined spaces are common, the compact arm length and horizontal orientation make this clamp a straightforward choice for fixture designers. Clear force ratings and the simple mounting concept aid straightforward documentation and spare-part management in maintenance schedules. For procurement or technical advice on the Kukamet Horizontal clamp 112 contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for supply and integration support. Technical Data SKU: B112-1-D-C1 GTIN: 8680731509250 eClass: 21041719 ETIM: EC011973 Facts Arm length: 43 mm Angle: 90° Pressing force (max): 850 N Holding force (max): 1000 N Weight: 0.114 kg Special features Massive holding arm Vertical foot mounting Blackened (blued) finish Lever clamp design FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal clamp 112 offers a maximum holding force of 1000 N, specified for static fixture retention. Can the clamp be mounted to horizontal plates? Yes, the clamp is supplied for vertical-foot mounting so it can be fastened to plates and bases used in fixture assemblies. What materials and surface protection are used? The clamp features a blackened (blued) finish on steel, providing surface protection and reduced glare during inspection. Is the clamping angle fixed or adjustable? The device is designed with a fixed 90° operating angle to ensure consistent actuation and repeatable positioning. Which SKU identifies this model for spare parts and orders? The SKU for ordering and documentation is B112-1-D-C1 for the Kukamet Horizontal clamp 112. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Arm, Safety Lock, 850 N Thrust, 1000 N Hold Force, Blackened Finish - Kukamet
Benefit from a secure, repeatable clamping solution thanks to the massive holding arm and integrated safety lock, which deliver consistent force and safe operation in fixture applications. Order the clamp directly via Metav Werkzeuge or consult our advisors for application support. Horizontal clamp 111 by Kukamet — 850 N clamping force, 90° locking The Horizontal clamp 111 is a compact, foot-mounted lever clamp designed for horizontal mounting in jigs, fixtures and workshop setups, offering reliable 90° locking for routine production and assembly tasks. Massive holding arm with safety lock Horizontal base for secure mounting 850 N clamping force for repeatable hold Blackened finish for corrosion resistance Robust clamping performance for repeatable setups The 111 clamp combines a massive holding arm with a positive locking mechanism to produce a consistent clamping force suited to repetitive tasks. With a rated pressing force of 850 N and a holding force of 1000 N, the unit separates the applied clamp force from the residual holding capacity, ensuring components remain secure after engagement. This distinction supports process stability in assembly and short-run production, reducing rework and inspection time by providing predictable workpiece retention during machining, welding or assembly operations. Compact design that simplifies fixture layout A short 43 mm arm and a horizontal foot mounting make the device easy to integrate into confined fixtures and jig plates. The compact footprint minimises interference with adjacent tooling while the 90° locking angle provides a defined end position for the lever, speeding cycle times and reducing operator variability. The relatively low mass—approximately 0.1 kg—allows multiple clamps to be installed without significantly increasing fixture weight, preserving machine dynamics and making the solution suitable for mobile fixtures or lightweight assemblies. Built for safety and reliable daily use Safety features are central to the clamp’s design: the safety lock prevents accidental release under vibration or incidental contact, and the massive arm construction reduces deformation under load. The clamp’s operational principle is intuitive—lever actuation with a defined locked position—supporting fast manual clamping while maintaining a secure hold. These attributes lower the risk of slippage during handling and support compliance with shop-floor safety practices, contributing to uninterrupted workflows. Durable finish and workshop readiness Finished in a blackened surface treatment, the clamp offers enhanced resistance to corrosion typical in humid or coolant-exposed environments. The robust finish reduces the need for frequent replacement due to surface wear, supporting long-term availability of clamping performance. Designed for straightforward mounting on a horizontal base, the device is ready for direct installation into existing fixtures, making it a practical choice for workshops seeking durable, low-maintenance clamping elements. For secure, repeatable clamping in fixtures, order the Kukamet Horizontal clamp 111 via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored technical advice and ordering support Technical data SKU: B111-1-D-L-C1 eClass: 21041719 ETIM: EC011973 Facts Arm: 43 mm Angle: 90° Weight: 0.1 kg Max pressing force: 850 N Max holding force: 1000 N Special features Mounting: horizontal base Material: blackened finish Massive holding arm Safety lock FAQ What clamping and holding forces does this clamp provide? The Kukamet Horizontal clamp 111 delivers a pressing force of 850 N and a holding force of 1000 N, providing consistent engagement and secure retention during handling and short machining steps. How is the clamp mounted and integrated into fixtures? Mounting is by a horizontal base designed for footprint installation on jig plates and fixture blocks; the unit’s compact base and 43 mm arm simplify layout in crowded assemblies. Is the locking position defined for repetitive operation? Yes, the clamp locks at a 90° lever angle, giving a repeatable end position that speeds cycle times and reduces positional variability during manual or semiautomatic processes. What finish and durability can be expected from the clamp? The clamp is supplied with a blackened finish that improves resistance to corrosion and surface wear, suitable for workshop environments with occasional exposure to coolant or humidity. Is the clamp suitable for use in small-series production and assembly? Designed with a robust holding arm and a safety lock, the 111 clamp is intended for frequent manual operation and short production runs where secure, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm And Safety Lock, 2.5 kN Hold Force, 2.3 kN Thrust - Kukamet
A compact horizontal toggle clamp with a massive clamping arm, safety locking mechanism and a 2,500 N holding capacity provides reliable workholding in jigs and fixtures. Benefit from secure 90° clamping, a 168 mm arm and a robust horizontal foot for efficient, repeatable production; order the clamp directly via Metav Werkzeuge or ask the consultants for integration advice. 111 Horizontal Toggle Clamp — horizontal clamp, 2,500 N holding force (Kukamet) A robust 111 Horizontal Toggle Clamp designed for secure workholding in production jigs and fixtures with a 168 mm arm and integrated safety lock. Massive clamping arm and safety lock 2,500 N maximum holding force 168 mm clamping arm length Horizontal foot mounting, 90° clamp angle Reliable clamping performance for repetitive tasks The compact lever design delivers a consistent 2,500 N holding force and a maximum pressing capacity of 2,300 N, ensuring components remain stationary during machining, welding or assembly. The element is engineered for repeatability: the massive clamping arm and the 90° clamp angle translate into predictable contact points and reduced repositioning time. In practice this means fewer rejects, less setup time and a measurable improvement in cycle stability when used in production fixtures or modular workholding systems. Straightforward mounting and durable finish for workshop use Fitted with a horizontal foot for secure attachment, the clamp integrates easily into plates, bases and jig plates without added adapters. The blackened finish gives basic corrosion resistance while keeping the footprint compact — weight is approximately 0.3 kg, so multiple units add little mass to a fixture. The robust construction and safety locking mechanism provide long service life under frequent actuation, making the clamp suitable for demanding shop-floor environments and small-batch production alike. Safety and handling that support productive workflows The safety lock prevents unintended release during handling and transport of clamped assemblies, reducing the risk of workpiece movement and operator intervention. Clear numerical capacities (holding and pressing forces) allow planners to match the clamp to the required clamping load, avoiding overspecification and ensuring efficient use of materials and space. The lever clamp concept supports rapid actuation — a practical advantage for applications that prioritise throughput without compromising secure fixation. Specify the Kukamet 111 in fixture layouts and contact Metav Werkzeuge for technical guidance and prompt supply from Emmerich. Technical Data Article number: B111-3-D-L-C3 Model: 111 Brand: Kukamet Facts Clamping arm length: 168 mm Weight: 0.3 kg Max pressing force: 2,300 N Max holding force: 2,500 N Clamp angle: 90° eClass: 21041719 ETIM: EC011973 Special features Massive clamping arm Safety locking mechanism Horizontal foot mounting Blackened finish Compact lever clamp design FAQ What is the maximum holding force of the clamp? The Kukamet 111 horizontal clamp provides a maximum holding force of 2,500 N as specified for secure fixture workholding. Can the clamp be mounted on standard jig plates? Yes, the product’s horizontal foot mounting is designed for direct attachment to jig plates and bases without special adapters. Is the clamp suitable for high-cycle production use? The massive clamping arm and safety locking mechanism make the Kukamet 111 suitable for frequent actuation and repetitive production tasks. What are the key dimensions to consider for integration? Important dimensions include the 168 mm clamping arm length and the 90° clamp angle; these determine reach and seating within fixtures. Does the finish offer corrosion protection? The blackened finish gives basic protection suited to workshop environments; specific corrosion resistance requirements should be confirmed for specialised applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm And Safety Lock, 2.5 kN Hold Force, 2.3 kN Thrust - Kukamet
Benefit from a robust combination of a massive holding arm, a secure safety lock and a compact 108 mm reach for dependable fixture clamping; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal toggle clamp 113 — 108 mm arm, safety locking mechanism by Kukamet A compact horizontal toggle clamp 113 for secure workpiece fixation in jigs, fixtures and assembly stations at a 90° orientation Massive holding arm Safety locking mechanism 108 mm reach Holding force up to 2,500 N Consistent clamping that speeds up production The horizontal toggle clamp delivers repeatable fixation through a robust mechanical design that reduces repositioning time. The combination of a massive holding arm and a secure safety lock ensures a stable hold during repetitive operations, which translates into fewer rejects and faster cycle times. The arm reach of 108 mm permits versatile positioning in confined fixtures; the compact footprint supports tight nest layouts without compromising accessibility. Built for safety and longevity on the shop floor Aimed at workshop and industrial use, the clamp features a mechanical lock that prevents accidental release once engaged, increasing process safety. The blackened finish provides a wear-resistant surface treatment suited to everyday handling, while the construction supports a holding capacity of 2,500 N and a clamping force rating of 2,300 N, values that indicate suitability for medium-duty securing tasks. The robust design minimises maintenance needs and extends service intervals in busy production environments. Straightforward mounting and integration into jigs Mounting is carried out via an angle foot that fixes the device at a 90° orientation, simplifying alignment in bespoke fixtures and enabling quick retrofitting to existing workstations. The compact weight of 0.42 kg reduces added load on fixture frames, and the toggle principle allows rapid manual operation with clear mechanical feedback. For applications that require reliable holding without complex pneumatics, this mechanical clamp offers an economical and durable solution. For fixtures that demand secure, repeatable clamping choose the Kukamet 113 — contact Metav Werkzeuge for tailored technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: B113-3-D-L-C2 Manufacturer: Kukamet Category: Toggle clamp / horizontal clamp Data Arm length: 108 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Weight: 0.42 kg Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Material/finish: blackened finish Mounting: angle foot Heavy-duty holding arm Safety locking mechanism Compact, manual toggle operation FAQ What clamping and holding forces does this clamp provide? The Kukamet horizontal toggle clamp 113 (SKU B113-3-D-L-C2) specifies a clamping force of up to 2,300 N and a holding force of up to 2,500 N. Is the clamp suitable for use in jigs and fixtures on an assembly line? Yes, the robust arm and safety lock make the clamp suitable for jigs and fixtures where manual or semi-automatic fixture clamping is required. How is the clamp mounted and positioned? The device uses an angle foot mounting for 90° orientation and offers a reach of 108 mm for adaptable positioning within fixtures. What is the surface finish and expected durability? The clamp has a blackened finish designed for wear resistance during regular workshop use and a construction aimed at long service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, 2.3 kN Thrust, 2.5 kN Holding Force, Blackened Steel - Kukamet
Take advantage of the combination of a robust holding arm, compact dimensions and reliable clamping performance to streamline fixture assembly and production jigs; order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if technical clarification is required. Horizontal clamp 113 — Kukamet horizontal clamping lever with 2,500 N holding capacity A Horizontal clamp 113 designed for right-angle fixture mounting and fast, repeatable clamping in workshop and production environments. *Massive holding arm for sustained stability *58 mm arm length for compact clamping *Up to 2,500 N holding force *Right-angle base (90°) for secure mounting Consistent clamping performance for precision work The 113 horizontal lever clamp delivers measured clamping and holding values that support reproducible processes: a maximum clamping force of 2,300 N with a holding force of 2,500 N, enabling secure fixation of components during machining or assembly. The lever action converts operator input into a stable clamping result, reducing cycle-time variability and improving process repeatability. For batch production and jigs where consistent pressure is essential, this clamp contributes to fewer rejects and steadier component positioning. Space-saving design that simplifies jig construction A short arm and compact footprint make the clamp particularly suitable where space is constrained on modular fixturing plates. The 58 mm arm length and overall low mass of 0.37 kg allow integration into tight assemblies without adding excessive inertia. The right-angle mounting foot provides a stable interface to fixture plates at 90°, enabling predictable alignment during installation and helping to save board or table surface area while maintaining access for tools and operators. Durable finish and robust mechanical construction Built with a robust holding arm and a black oxide finish, the clamp resists wear from repeated operation and provides a subdued, anti-reflective surface that minimises shop-floor glare. The solid construction ensures that the clamping geometry remains stable under repeated load cycles, supporting long service intervals and predictable maintenance schedules. The lever mechanism is engineered for quick engagement and reliable retention, supporting both frequent manual use and integration into semi-automatic assembly workflows. Practical applications and straightforward installation The clamp is designed for use in jigs, fixtures and tooling stations where horizontal lever action and secure right-angle mounting are required. Installation is simplified by the angle base which offers a fixed 90° orientation, and the compact dimensions make retrofitting into existing fixture layouts straightforward. Where quick manual operation and dependable holding are priorities, this lever clamp offers a low-complexity solution that integrates easily into standard clamping arrangements and reduces set-up time per job. Request a technical consultation from Metav Werkzeuge to specify the ideal clamping layout for your application or to place an order for Kukamet Horizontal clamp 113 (SKU B113-3-D-C1) Technical data SKU: B113-3-D-C1 GTIN: 8680731507454 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 58 mm Weight: 0.37 kg Angle: 90° Maximum clamping force: 2,300 N Maximum holding force: 2,500 N Special features Mounting: angle base (right-angle foot) Finish: black oxide Massive holding arm Category: horizontal clamp / lever clamp FAQ What clamping forces can be expected from this clamp? The Kukamet Horizontal clamp 113 delivers a maximum clamping force of 2,300 N and a maximum holding force of 2,500 N, suitable for securing components in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is via a right-angle base (90° angle foot) that provides a stable interface for connection to fixture plates and ensures consistent alignment. Is the clamp suitable for compact fixture designs? Yes. The 58 mm arm length and overall compact construction make the clamp well suited to tight layouts and retrofitting into existing jig systems. What surface protection does the clamp have? The clamp is finished with a black oxide (blackened) surface that enhances wear resistance and reduces reflective glare on the shop floor. Which SKU should be ordered for this model? Order using SKU B113-3-D-C1 for the Kukamet Horizontal clamp 113 to ensure the correct model and spec are supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, 5000 N Holding Force, Galvanised - Kukamet
Take advantage of the combination of a massive holding arm, high clamping capacity and corrosion-resistant finish for dependable fixture performance. Order the clamp directly via Metav Werkzeuge or consult the specialists for specification matching and rapid delivery. Horizontal clamp 113 — Kukamet toggle clamp with zinc-plated finish and 5,000 N holding force The Horizontal clamp 113 is a 90° toggle clamp designed for robust workholding in production jigs and assembly fixtures Robust solid holding arm 5,000 N maximum holding force 4,500 N maximum clamping force 217 mm reach arm length Zinc-plated corrosion protection Secure clamping that reduces rework and boosts throughput The clamp delivers 5,000 N of maximum holding force and a clamping pressure of 4,500 N, providing a secure connection between workpiece and fixture. The massive holding arm transfers force evenly, which reduces movement during machining and assembly and thus lowers the risk of rejects. Specified forces allow planners to calculate safety margins and cycle reliability, supporting efficient production sequences and measurable process stability. Rapid integration into fixtures and compact set-ups With an effective 217 mm reach and a dedicated angle foot mounting, this toggle clamp mounts cleanly to perpendicular jig plates and workbench edges. The 90° orientation simplifies positioning in common fixture geometries and the unit’s modest mass (approx. 1.906 kg) eases handling during assembly. These attributes shorten installation time, simplify retrofits and minimise fixture redesign, enabling faster changeovers and consistent part locating. Built to last in workshop conditions Constructed from zinc-plated steel, the clamp resists corrosion in workshop atmospheres while remaining straightforward to maintain. The robust construction supports repetitive cycles in production environments without frequent replacement, improving total cost of ownership through longevity and reduced downtime. Traceable identification is provided for stockkeeping and planning, supporting transparent logistics and predictable inventory management. Contact Metav Werkzeuge for specification advice or a tailored quotation for the Kukamet Horizontal clamp 113 with angle-foot mounting and 217 mm reach Technical Data SKU: 113-5-D-C3 GTIN: 8680731501032 Manufacturer: Kukamet Core specifications Arm length: 217 mm Maximum holding force: 5,000 N Maximum clamping force: 4,500 N Weight: 1.906 kg Angle: 90° Features & materials Material: Zinc-plated steel Mounting: Angle foot Solid heavy-duty holding arm eClass: 21041719 ETIM: EC011973 FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 113 offers a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, values that support secure positioning in jigs and fixtures. How is the clamp mounted to a fixture? Mounting is via an angle foot, designed for 90° attachment to fixture plates or bench edges, allowing neat integration into standard jig designs. What is the reach of the clamping arm? The clamp has a 217 mm arm reach, suitable for a wide range of part sizes and for applications that require extended access from the mounting plane. What material is the clamp made from and how resistant is it to corrosion? The clamp is manufactured from zinc-plated steel, providing enhanced corrosion resistance for typical workshop and production environments. Is the clamp suitable for repetitive production cycles? Yes, the heavy-duty design with a massive holding arm and zinc-plated finish is intended for repetitive use in industrial and workshop fixtures, delivering consistent performance over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, 5 000 N Hold, 4 500 N Press Force, Blackened - Kukamet
Robust construction with a massive holding arm, 5,000 N holding force and a secure safety lock delivers consistently reliable clamping in repetitive production tasks; the compact 229 mm arm and horizontal foot simplify fixture integration. Order the clamp directly via Metav Werkzeuge or request technical advice from our consultants in Emmerich. Horizontal clamp 111 — 5,000 N holding force, 229 mm arm (Kukamet) The Horizontal clamp 111 is a horizontal lever clamp engineered for secure workpiece holding in jigs and fixtures, combining a massive holding arm with a mechanical safety lock for reliable industrial use. Solid holding arm and safety lock 5,000 N maximum holding force 4,500 N clamping force Horizontal foot for stable mounting Consistent, measurable clamping for repeatable results The lever design provides a clearly defined clamping force, delivering 4,500 N of clamping action while the device maintains a 5,000 N holding force when locked. These values translate into lower micro-movement and improved positional stability, which supports higher repeatability in batch production and reduces rework. The distinction between clamping and holding force is practical: clamping force is the active pressing force during engagement, while holding force describes the secured state after the safety lock is applied, ensuring parts remain stationary during machining or inspection. Durable mechanics that fit workshop workflows A massive holding arm with an integrated safety lock and a horizontal foot for mounting create a compact yet robust fixture element. The 229 mm arm gives sufficient reach for most jig arrangements without adding unnecessary bulk, while the black oxide finish increases surface resistance to handling and workshop conditions. The unit’s construction focuses on low-maintenance durability: wear-critical components are concentrated in the lever mechanism so that routine inspections are quick and replacement parts can be serviced without long downtimes. Faster setups and safer operation for frequent cycles The 90° lever geometry produces a controlled toggle action that converts operator effort into high clamping efficiency while limiting over-travel. This results in shorter setup times and reduced operator fatigue when used in repeated clamping cycles. The integrated safety lock adds a passive layer of protection that prevents unintentional release, making the device suitable for both production lines and precision assembly stations. The combination of swift handling and mechanical security supports higher throughput without compromising operator confidence. For procurement or detailed specification support for the Kukamet Horizontal clamp 111, contact Metav Werkzeuge in Emmerich for reliable supply and expert advice Technical data Article number: B111-5-D-L-C3 Model: 111 Type: Horizontal clamp Finish: black oxide Mounting: horizontal foot Facts Arm length: 229 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Angle: 90° Weight: 1.4 kg eCl@ss: 21041719 ETIM: EC011973 Special features Massive holding arm and safety lock Horizontal foot for stable mounting Lever (toggle) action for efficient operation Robust workshop finish Category: Clamps FAQ What are the clamping and holding forces of this clamp? The clamping force is 4,500 N and the holding force is 5,000 N for the Kukamet Horizontal clamp 111 (SKU B111-5-D-L-C3), values that support secure positioning in fixtures. How is the clamp mounted to a jig or workbench? Mounting is via a horizontal foot; the Horizontal clamp 111 is designed for stable attachment to fixture plates and jig bases. Is the clamp suitable for repetitive production use? Yes, the lever (toggle) geometry and the massive holding arm make the Kukamet clamp suitable for frequent cycles and short setup times in production environments. What finish does the clamp have and why does it matter? The clamp is supplied with a black oxide finish, which improves surface resistance to handling and workshop conditions and contributes to longer service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 1,200 N Hold Force, 1,000 N Thrust - Kukamet
Combining a 116 mm solid holding arm, a safety locking mechanism and reliable clamping up to 1,000 N, this horizontal toggle clamp ensures secure, repeatable fixation for jigs and fixtures; order directly via Metav Werkzeuge or contact the consultants for application guidance. Horizontal toggle clamp 111 – horizontal clamp with 116 mm arm and safety lock (Kukamet) A robust horizontal clamping solution, the Horizontal toggle clamp 111 is designed for secure workpiece retention in assembly, welding and fixture applications, offering a compact footprint and rapid manual operation. Robust 116 mm solid holding arm Safety locking mechanism for secure clamping Horizontal foot mounting for stable setup Clamping force up to 1,000 N Lightweight: 0.2 kg for easy positioning Consistent force and clear load ratings for process reliability The clamp delivers a clearly defined clamping force of 1,000 N and a maximum holding force of 1,200 N, values that allow straightforward capacity planning for production jigs and small-batch fixtures. Specified forces denote two different functions: the clamping force refers to the active force applied during engagement, while the holding force indicates the resistance to displacement under load. This separation supports reliable selection for applications where repeatable tension and secure retention are essential, reducing the need for trial-and-error in the workshop. Space-efficient mounting that streamlines fixture design With horizontal foot mounting and a working angle of 90°, the device integrates into compact toolings and table-mounted fixtures without obstructing adjacent components. The combination of a short 116 mm arm and a total weight of 0.2 kg permits close-packed layouts and quick manual handling during set-up changes. The modest mass also helps when arranging multiple clamps across a jig plate, keeping clamping points accessible and simplifying adjustments during assembly tasks. Durable construction and inbuilt safety to cut downtime Constructed with a solid holding arm and finished in a blackened finish, the clamp is engineered for long service life in demanding workshop environments. The safety lock prevents inadvertent release during machining or handling, thereby reducing the risk of loose workpieces and unplanned interruptions. Together these features support a low-maintenance workflow: robust mechanics minimise wear-related adjustments, while positive locking increases operator confidence in repeated processes. For secure and repeatable clamping in production fixtures, rely on Kukamet quality — contact Metav Werkzeuge for order placement or application consultation at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: B111-2-D-L-C2 Manufacturer: Kukamet EClass: 21041719 ETIM: EC011973 Facts Arm length: 116 mm Working angle: 90° Clamping force (max): 1,000 N Holding force (max): 1,200 N Weight: 0.2 kg Special features Mounting: horizontal foot Material / finish: blackened finish Solid holding arm Safety locking mechanism FAQ What clamping and holding forces does this clamp provide? The Kukamet horizontal toggle clamp 111 (SKU B111-2-D-L-C2) supplies a maximum clamping force of 1,000 N and a maximum holding force of 1,200 N. How is the clamp mounted to a fixture or workbench? Mounting is via a horizontal foot, designed for bolting to jig plates or table surfaces for a stable attachment. What are the key dimensions relevant for fixture design? Relevant dimensions include an arm length of 116 mm and a working angle of 90°, together with a compact mass of 0.2 kg. Does the clamp include a device to prevent accidental release? Yes, the unit features a safety locking mechanism that secures the clamped position and reduces the risk of unintended opening. Which workshop applications suit this clamp best? The clamp is suited to assembly jigs, welding fixtures and small-batch production where compact, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 1,200 N Hold, 1,000 N Closing Force - Kukamet
Rely on the compact 90° horizontal clamp with a massive holding arm and a safety latch for secure, repeatable fixturing; its high holding force and slim footprint support efficient jig design. Order the Horizontal clamp 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 111 — 90° horizontal lever clamp with 166 mm arm by Kukamet The Horizontal clamp 111 is a compact 90° horizontal lever clamp designed for secure fixation of small workpieces in jigs, fixtures and assembly stations. Massive holding arm and safety lock 90° horizontal mounting foot Max holding force 1,200 N Consistent clamping for repeatable production The clamp delivers a reliable holding force of up to 1,200 N with an actuation force rated at 1,000 N, engineered to maintain secure contact under cyclic use. The combination of a massive holding arm and a mechanical safety latch reduces the risk of unintentional release, which supports process stability and reduces rework. These mechanical properties are presented as measurable values to aid in fixture design and process planning. Space-saving design that simplifies jig integration With an arm length of 166 mm and a 90° horizontal mounting foot, this clamp occupies minimal lateral space while still providing robust clamping. The compact footprint and low weight (approx. 0.2 kg) enable straightforward incorporation into tight fixtures and modular tooling systems. The horizontal mounting orientation supports common fixture geometries, allowing equipment designers to optimise throughput without complex adaptations. Durable finish and robust mechanical construction The component is finished in a blackened surface that provides basic corrosion resistance and a professional appearance. The massive arm construction increases rigidity and reduces deflection, improving positional accuracy of the clamped part. Where repeatable positioning and long service life are required, this lever clamp offers a low-maintenance solution that integrates easily into industrial jigs and manual assembly rigs. For proven clamping reliability from Kukamet, request a technical quote or discuss fixture integration with Metav Werkzeuge in Emmerich — our consultants provide tailored advice and delivery from stock Technical data SKU: B111-2-D-L-C3 Model: 111 Product: Horizontal clamp Manufacturer: Kukamet Facts Arm length: 166 mm Max actuation force: 1,000 N Max holding force: 1,200 N Angle: 90° Weight: 0.2 kg ECLASS: 21041719 ETIM: EC011973 Special features Mounting: horizontal foot Finish: blackened Massive holding arm Safety latch Lever-style clamp suitable for jigs and fixtures FAQ What maximum holding force does the Horizontal clamp 111 provide? The Horizontal clamp 111 provides a maximum holding force of 1,200 N and an actuation force of 1,000 N for secure fixation in jigs and fixtures. Is the clamp suitable for tight fixture spaces? Yes, the compact design with a 166 mm arm and a 90° horizontal mounting foot allows integration into confined fixture layouts while maintaining rigidity. What protection does the finish offer against corrosion? The blackened finish on the clamp offers basic corrosion resistance and a robust surface for workshop use without specialised coatings. Can the clamp be used in repetitive assembly operations? The combination of a massive holding arm and safety latch makes the clamp well suited for repetitive clamping cycles in production and assembly environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 2.3 kN Thrust, Galvanised - Kukamet
The combination of a galvanised construction, a massive holding arm and an integrated safety lock ensures reliable long-term clamping at a fixed 90° angle; the compact 168 mm arm and low weight support fast fixture changes and repeatable cycles. Order the Kukamet 111 horizontal clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Kukamet 111 horizontal clamp – galvanised lever clamp with safety lock The 111 horizontal clamp is a horizontal lever clamp designed for secure 90° holding in jigs and fixture plates, suited to repetitive production, assembly and welding tasks. Robust galvanised construction Massive holding arm with safety lock Horizontal foot mounting for stable installation Consistent, measurable clamping for production use Built for predictable results, this lever clamp delivers clear numerical performance: a maximum pressing force of 2300 N and a maximum holding force of 2500 N, values that translate into secure workpiece retention during machining or assembly. The defined forces reduce variation in clamping pressure, which in turn supports process stability and fewer rejects. For production planning, these figures enable direct comparison with existing fixtures and clear specification of clamping capacity for component handling. Durable materials and integrated safety for everyday workshop demands Constructed from galvanised steel and fitted with a massive holding arm, the device resists corrosion and maintains functional integrity in demanding environments. The built-in safety lock prevents accidental opening under load, offering an operational safeguard during handling and transport of clamped parts. Together, these characteristics reduce maintenance intervals and contribute to a longer service life, lowering total cost of ownership in small-batch and continuous manufacturing contexts. Compact design that simplifies fixture integration With an arm length of 168 mm and a compact overall mass of 0.3 kg, the clamp combines leverage with low bulk, allowing integration into tight jigs and modular fixtures without excessive added mass. The horizontal foot mounting ensures a stable attachment point on fixture plates or tooling bars and keeps the clamping motion parallel to the workpiece plane. This compact form factor speeds cycle times by making manual or pneumatic actuation straightforward and aids ergonomic handling during frequent set-ups. For secure, long-lasting clamping choose the Kukamet 111 via Metav Werkzeuge — contact our Emmerich-based specialists for tailored fixture advice and reliable supply from stock. Technical data SKU: 111-3-D-L-C3 GTIN: 8680731500196 Model: 111 Key figures Arm length: 168 mm Closing angle: 90° Max pressing force: 2300 N Max holding force: 2500 N Weight: 0.3 kg eClass: 21041719 ETIM: EC011973 Materials & features Material: galvanised Mounting: horizontal foot Solid holding arm and safety lock Suitable for repetitive clamping and fixture use FAQ What clamping forces can be expected from this clamp? The Kukamet 111 horizontal clamp provides a maximum pressing force of 2300 N and a maximum holding force of 2500 N, suitable for secure retention in many fixture applications. How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the horizontal foot design allows stable attachment to fixture plates or tooling bars for parallel clamping action. Is the clamp suitable for use in humid or corrosive environments? The galvanised finish on the Kukamet 111 offers improved corrosion resistance compared with untreated steel, supporting use in workshops where exposure to moisture occurs. Can the clamp prevent accidental release during handling? Yes, the clamp is fitted with a safety locking mechanism and a massive holding arm that together reduce the risk of unintended opening under load. What are the physical dimensions relevant to fixture design? Key dimensions for planning are an arm length of 168 mm and a closing angle of 90°, with a compact weight of 0.3 kg for straightforward integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 2300 N Thrust, 2500 N Grip, Blackened Finish - Kukamet
Take advantage of the combination of robust clamping performance, a compact 68 mm arm and an integrated safety lock for secure, repeatable fixturing. Benefit from a lightweight design that simplifies installation while delivering 2,300 N closing force and 2,500 N holding force for demanding workshop and production tasks. Order the horizontal lever clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Horizontal lever clamp 111 — compact 90° horizontal clamping with safety lock A Kukamet horizontal lever clamp designed for secure fixture clamping in production and assembly; features a massive holding arm and horizontal foot mounting for stable installation Massive holding arm and safety lock 68 mm arm for compact fixture design 2,300 N closing force, 2,500 N holding force Horizontal foot mounting for simple installation Reliable clamping performance for consistent production results The clamp delivers a clear technical advantage with a 2,300 N closing force combined with a 2,500 N holding force, providing dependable restraint during machining, assembly and testing tasks. The difference between closing and holding force is explained by the clamping geometry and locking mechanism: the first refers to the actuation force applied when engaging the clamp, while the latter indicates the sustained force that keeps the workpiece secure once the clamp is locked. The massive holding arm contributes to rigidity under load and reduces elastic deformation, which helps maintain repeatability across multiple cycles. These characteristics support efficient process control and reduce rework caused by movement under load. Compact design that saves space and speeds up fixture assembly With a 68 mm arm and a 90° swivel orientation, this clamp is tailored for confined setups and multi-clamp jigs where footprint matters. The horizontal foot mounting enables direct attachment to fixture plates or tooling blocks without complex adapters, cutting assembly time and simplifying toolroom logistics. At just 0.3 kg, the unit is lightweight enough to reposition during tooling optimisation but sturdy enough to withstand regular industrial use. The blackened finish provides a protective surface that minimises visible wear and offers straightforward visual inspection of the clamping surface over time. Practical safety and ergonomic benefits for workshop use Ergonomics and operational safety are addressed by the built-in safety lock, which prevents accidental release during handling or vibration-heavy processes. The clamp's 90° lever action suits manual or semi-automatic actuation, allowing quick engagement and release while maintaining a low profile in the fixture. The combination of a lever clamp mechanism and a massive holding arm creates a balance between fast operation and secure locking, which is particularly valuable in repetitive production runs and assembly lines where cycle time and operator safety are both priorities. Contact Metav Werkzeuge for advice on integrating the Kukamet Horizontal lever clamp 111 into existing fixtures or for availability from the Emmerich warehouse Technical data Article number: B111-3-D-L-C1 ECLASS: 21041719 ETIM: EC011973 Core specifications Arm length: 68 mm Angle: 90° Closing force: 2,300 N Holding force: 2,500 N Weight: 0.3 kg Materials & special features Surface: blackened finish Mounting: horizontal foot Feature: massive holding arm Feature: safety lock Product type: lever clamp FAQ What clamping forces does this clamp provide? The Kukamet Horizontal lever clamp 111 provides a closing force of 2,300 N and a holding force of 2,500 N, ensuring secure retention once locked. Is the clamp suitable for confined or compact fixtures? Yes, the compact 68 mm arm and 90° orientation make the clamp well suited to tight fixture designs and multi-clamp jigs. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot, allowing direct fixation to tooling plates or blocks without additional adapters. Does the clamp include a safety mechanism to prevent accidental release? The unit is equipped with an integrated safety lock that prevents unintentional opening under vibration or during handling. What finish and weight can be expected for the clamp? The clamp features a blackened finish and weighs approximately 0.3 kg, balancing durability with easy handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 850 N Thrust / 1,000 N Hold - Kukamet
Take advantage of a compact, high‑performance clamp that combines robust holding power and a secure safety lock for reliable fixture work. The design and mounting options support efficient jigs and repeatable clamping cycles. Order the horizontal clamp directly via Metav Werkzeuge or consult the team for specification advice. Horizontal clamp 113 — Kukamet horizontal lever clamp with 90 mm arm and 1,000 N holding force Horizontal clamp 113 is a horizontal lever clamp designed for secure workholding in fixtures, jigs and assembly aids Robust 90 mm holding arm Up to 1,000 N holding force Safety locking mechanism Angle foot mounting at 90° Consistent clamping for repeatable production The compact lever clamp delivers consistent, measurable holding power that reduces rework and speeds up cycle times. With a 90 mm arm and a holding force of 1,000 N, the device is suited to small to medium fixture tasks where repeatability matters. The lever action converts operator input into reliable clamping force, while the moderate overall mass keeps the component inert in automated or manual setups. The blackened finish provides corrosion resistance and a professional appearance in the work environment. Safety features that protect processes A safety locking mechanism prevents unintended opening during machining or handling, contributing to operator confidence and fewer stoppages. The clamp’s 850 N maximum pressing force ensures firm contact without excessive stress on delicate workpieces, enabling controlled clamping for a range of materials. The positive lock also facilitates safe unclamping procedures during tool changes and part removal, supporting a smoother workflow and lower risk of accidental release. Compact mounting for space‑conscious fixtures Designed with an angle foot (Winkelfuß) for 90° installation, this clamp integrates cleanly into vertical or horizontal fixture plates. The lightweight construction (approx. 0.155 kg) minimises added mass on moving assemblies while the massive holding arm provides the rigidity required for stable contact. Where space is limited, the clamp offers a compact footprint without compromising on effective force transmission or locking reliability. Practical choice for workshop and production environments Built as a lever clamp for general clamping applications, the model supports rapid fixturing and repeated part handling. The blackened finish resists wear and keeps components presentable in a production setting. Thanks to straightforward mechanics and proven clamping geometry, the device is easy to integrate into existing jigs and fixtures, reducing engineering time and enabling faster set‑ups. For procurement or technical enquiries about Kukamet’s horizontal clamp 113, contact Metav Werkzeuge for sourcing and specification assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B113-1-D-L-C2 Manufacturer: Kukamet Model: 113 Category: Spanner eClass: 21041719 ETIM: EC011973 Facts Arm length: 90 mm Holding force: 1,000 N Maximum pressing force: 850 N Weight: 0.155 kg Angle: 90° Special features Angle foot mounting (Winkelfuß) Blackened finish Massive holding arm Safety locking mechanism Lever clamp type Storytrigger: lever clamp FAQ What clamping forces does the clamp provide? The Horizontal clamp 113 from Kukamet offers a holding force of 1,000 N and a maximum pressing force of 850 N, suitable for many fixture applications. How is the clamp mounted in a fixture? Mounting is via an angle foot designed for 90° installation, enabling straightforward integration into plates and jig assemblies. What is the arm length and overall weight? The holding arm measures 90 mm, and the clamp weighs approximately 0.155 kg, making it compact and lightweight for tight setups. Does the clamp include a safety feature to prevent accidental release? Yes, the device incorporates a safety locking mechanism to secure the clamped position during handling and processing. What finish and material protection does the product have? The clamp is supplied with a blackened finish that offers basic surface protection and a uniform appearance for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Metal Handle, Vertical Foot, Stainless Steel, 450 N Thrust / 520 N Holding - Kukamet
Take advantage of a compact, corrosion-resistant toggle clamp that combines stainless steel construction with reliable holding performance — ideal for repetitive fixture work where space and durability matter. Use the robust vertical mounting foot and M4x25 pressure spindle to integrate the clamp into jigs and fixtures quickly; order the Kukamet clamp directly via Metav Werkzeuge or consult our specialists for specification support. Horizontal toggle clamp "112" (S112-0-M) — stainless steel, 520 N holding force (Kukamet) The Horizontal toggle clamp "112" secures components at a 90° angle with a vertical mounting foot and a metal handle, intended for jigs, fixtures and repeatable holding tasks in light to medium-duty production Stainless steel construction 520 N holding force 450 N clamping force Vertical mounting foot Metal handle for durable grip Consistent clamping for precision work The toggle design delivers repeatable holding with clearly specified force values: a maximum holding force of 520 N and a clamping push of 450 N, both measured for reliable fixture performance. The presence of an M4x25 pressure spindle allows fine adjustment of contact pressure, so the clamp can be tuned to the workpiece without reconfiguring the fixture. This precision reduces part movement during machining or assembly and supports consistent quality control in serial processes. Built to last in workshop environments Constructed from stainless steel, the clamp resists corrosion and wear where regular cleaning or humid conditions are expected. A metal handle increases durability under frequent actuation and keeps the control feel consistent over long production runs. Despite robust materials, the device is compact and lightweight (0.042 kg), which simplifies placement on small fixtures and reduces added mass on movable tooling plates. Quick integration into jigs and fixtures The clamp’s vertical mounting foot and 90° actuation angle make it straightforward to incorporate into existing setups or new bespoke fixtures. Installation is aided by standardised connection points and the adjustable M4x25 pressure spindle, permitting a close fit against various workpiece geometries. The compact form factor also allows multiple clamps to be positioned closely for multi-point support without obstructing tool access, increasing process flexibility on benches and CNC fixtures alike. Specify the Kukamet horizontal toggle clamp "112" through Metav Werkzeuge for robust, space-saving clamping — contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S112-0-M GTIN: 8680731508932 Manufacturer: Kukamet Facts Weight: 0.042 kg Clamping force (max): 450 N Holding force (max): 520 N Angle: 90° Pressure spindle: M4x25 eClass: 21041719 ETIM: EC011973 Special features Material: stainless steel Vertical mounting foot Metal handle Designed for jig and fixture use FAQ What holding force does the clamp provide? The Kukamet horizontal toggle clamp "112" provides a maximum holding force of 520 N for secure fixation during light to medium-duty operations. Is the clamp suitable for humid or corrosive workshop conditions? Yes, the clamp is made from stainless steel, giving the device increased resistance to corrosion and making it suitable for harsher shop environments. How is contact pressure adjusted? Contact pressure is adjusted via the M4x25 pressure spindle; this enables fine tuning of clamp contact without altering the fixture. Can the clamp be mounted to a fixture plate? The clamp features a vertical mounting foot designed for straightforward attachment to plates and bespoke jigs, supporting compact layouts. What is the difference between clamping force and holding force for this clamp? Clamping force (450 N) refers to the push applied by the spindle during locking, while holding force (520 N) indicates the maximum resistance to pull-out once the clamp is engaged. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com