Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° Pneumatic Clamp With Massive Holding Arm, 1200 N Push / 1400 N Hold, Zinc-Plated - Kukamet
Take advantage of a robust, galvanised design, 1,400 N holding force and compact 162 mm reach for dependable production clamping. Order the pneumatic clamp directly via Metav Werkzeuge or request advice from our consultants for seamless integration. 652 Pneumatic Clamp – Vertical-foot, 1,400 N holding force (Kukamet) The 652 pneumatic clamp is a vertical-foot, 90° clamping device designed for repetitive holding tasks in workshop and light industrial production settings. Massively reinforced holding arm Galvanised construction for corrosion resistance 1,400 N maximum holding force Vertical-foot mounting for bench or fixture fit Reliable clamping performance that keeps lines moving The device delivers consistent, measurable clamping through pneumatic actuation, combining a maximum holding force of 1,400 N with a separate actuation force of 1,200 N. This separation of holding and actuation values supports secure workholding without overstressing components, which improves cycle reliability. The vertical-foot mounting provides a compact footprint and straightforward integration into jigs and fixtures, while the 162 mm arm reach enables clamping across typical workpiece geometries. For operations where repeatability and throughput are priorities, this configuration reduces setup time and minimises rework. Built for durability and low-maintenance operation Constructed in galvanised steel with a massive holding arm, the clamp withstands shop-floor conditions and resists surface corrosion that can impair repetitive assemblies. Pneumatic actuation architecture keeps mechanical complexity low: fewer moving parts mean simplified maintenance and longer intervals between inspections. The robust design translates into predictable life-cycle performance, lowering total cost of ownership through reduced downtime and fewer replacements. Practical integration and safe handling in production A 90° clamping angle facilitates secure positioning for welding, machining or assembly steps where angular retention is essential. The unit’s pneumatic operation allows for rapid, tool-free actuation via existing compressed air systems and supports automation or semi-automatic fixtures. Technical staff benefit from a clear separation of clamping and holding forces, which simplifies cycle tuning and ensures that clamping pressure can be adjusted to the process requirement without compromising fixture stability. The compact footprint and vertical mounting plate ease retrofitting onto existing workstations. Specification-led benefits for procurement and production planners Because the clamp is presented as a finished industrial component with defined force and mounting parameters, planners can specify it directly into bills of materials and fixture drawings. The compact 162 mm arm and fixed 90° angle reduce the need for custom adapter work, accelerating fixture build times. The galvanised finish supports use in workshops where humidity or coolant exposure would otherwise require additional protective measures. Discuss specification and supply of the Kukamet 652 pneumatic clamp with Metav Werkzeuge for fast delivery, technical clarification and fixture-matching advice Technical data SKU: 652-2-D-C3 GTIN: 8680731506068 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Core measurements Arm length: 162 mm Clamping angle: 90° Actuation force (max): 1,200 N Holding force (max): 1,400 N Materials & special features Material: galvanised steel Mounting: vertical foot Massive holding arm present Pneumatic actuation Category: clamps Storytrigger: lever clamp FAQ What maximum holding force does the clamp provide? The Kukamet 652 pneumatic clamp provides a maximum holding force of 1,400 N; the pneumatic actuation delivers up to 1,200 N of actuation force. How is the clamp mounted to a fixture or bench? Mounting is by a vertical foot plate designed for direct attachment to workbenches, fixture plates or custom jigs; the vertical-foot arrangement keeps the unit compact on the assembly surface. Is the surface finish suitable for humid shop environments? Yes, the galvanised finish gives corrosion resistance suitable for many workshop conditions and helps protect the clamp in everyday use. Can the clamp be used for automated lines? The pneumatic actuation is compatible with automated or semi-automated systems and can be integrated with existing compressed-air control circuits for cycle-timed operation. Which reach does the clamp offer for typical workpieces? The clamp features a 162 mm arm reach, which covers common clamping distances in small- to medium-sized fixtures and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Vertical Handle And Solid Holding Arm, 2,000 N Force, Galvanised - Kukamet
Benefit from a robust combination of high clamping force, corrosion-resistant construction and a compact 167 mm reach that keeps fixtures secure and accessible. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 651 Pneumatic clamp — vertical-handle 90° clamp by Kukamet, galvanised, 2,500 N holding force A 651 Pneumatic clamp engineered for reliable 90° clamping in industrial fixturing, featuring a vertical foot mount and a solid, galvanised holding arm. Vertical handle for fast actuation Massive galvanised holding arm 167 mm reach for flexible positioning 2,500 N maximum holding force Consistent clamping force for dependable cycle times The pneumatic design delivers a controlled clamping sequence, with a maximum 2,000 N actuation force producing up to 2,500 N holding force, ensuring secure fixation of workpieces during machining and assembly. This relationship between actuation and holding values means repeatable clamping pressure across cycles, reducing rework and improving throughput. The force figures are useful when matching the clamp to existing jigs or calculating fixture safety margins; the numerical ratings allow direct comparison with other industrial clamps and support decision-making during fixture design. Built for harsh workshop environments and long service life Constructed from galvanised steel with a massive holding arm, the unit resists corrosion and mechanical wear typical in metalworking shops. The vertical handle and compact lever geometry concentrate actuation into a short, ergonomic motion, while the 90° orientation suits right‑angle locating and common fixture layouts. These attributes contribute to lower maintenance intervals and a longer effective service life, translating into fewer interruptions and a more predictable production rhythm. Easy integration into existing fixtures and safer operation A 167 mm reach provides practical access to clamping points without requiring layout changes, and the vertical foot mounting simplifies installation on horizontal plates or tooling blocks. The clamp’s lever-style actuation and clear mechanical travel make it straightforward to incorporate into pneumatic circuits and automated systems where pneumatic toggle clamps are required. Operator handling is more consistent with a vertical grip, reducing the risk of improper engagement and supporting safer, faster changeovers at the workbench. Contact Metav Werkzeuge for tailored fixturing advice or to request the Kukamet 651 pneumatic clamp for your production line; our consultants in Emmerich will advise on application suitability and integration options Technical Data Article number: 651-3-H-D-C3 Manufacturer: Kukamet Material: Galvanised Mounting: vertical foot Core technical data Arm (reach): 167 mm Angle: 90° Maximum actuation force: 2,000 N Maximum holding force: 2,500 N eClass: 21021004 ETIM: EC011973 Special features Vertical handle for lever-style actuation Massive, solid holding arm Suitable for right-angle clamping Corrosion protection by galvanising Catalogue page available (see product assets) FAQ What clamping force can be expected from this clamp? The Kukamet 651 pneumatic clamp provides up to 2,500 N holding force, with a maximum actuation force of 2,000 N, suitable for medium to heavy-duty fixturing tasks. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot, designed for secure attachment to horizontal tooling plates or fixture blocks; the vertical orientation supports compact layout and stable clamping at 90°. Is the holding arm suitable for harsh workshop environments? Yes, the holding arm is massive and the clamp is galvanised, offering enhanced resistance to corrosion and mechanical wear common in manufacturing environments. What reach does the clamp provide for positioning workpieces? The clamp has a reach of 167 mm, allowing flexible positioning of the clamping point relative to the mounting location. What is the product SKU for ordering and reference? The clamp is listed as SKU 651-3-H-D-C3 and marketed as the Kukamet 651 Pneumatic clamp, useful for procurement and spare-part identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp 1400 N Clamping Force, 1625 N Holding Force, Galvanised - Kukamet
Take advantage of a compact, galvanised lever clamp that pairs a sturdy vertical-foot mount with high clamping and holding forces for reliable workholding in jigs and fixtures. Benefit from the combination of corrosion resistance, measurable performance and simple integration into existing fixtures. Order the vertical clamp directly via Metav Werkzeuge or request application advice from their specialists. Vertikalspanner 252 — Vertical lever clamp with galvanised finish and vertical-foot mounting (Kukamet) The Vertikalspanner 252 is a compact vertical lever clamp designed for secure, repeatable clamping in fixtures and jigs across workshop and light industrial environments. Galvanised steel construction for corrosion resistance Vertical-foot mounting for sturdy installation Max clamping force 1,400 N; holding 1,625 N Robust construction that keeps production moving The clamp is built as a compact lever clamp with a galvanised finish, offering durable protection against corrosion and wear. This construction reduces downtime for maintenance and preserves clamping accuracy over repeated cycles. The solid design delivers consistent performance, supporting stable production processes where repeatability is essential. As a consequence, fixture lifecycles are extended and quality control is simpler to maintain without frequent replacements. Quick and secure integration into jigs and fixtures With a vertical-foot mounting arrangement, the unit is intended for straightforward attachment to plates and bases commonly used in jigs. The mounting style simplifies alignment and secures the clamp against lateral movement during operation, which reduces setup time and makes the component suitable for series production or frequent changeovers. The compact footprint also helps when space in a fixture is limited, enabling tighter nesting of workpieces without sacrificing accessibility. Measurable clamping performance for safer machining The clamp delivers a max clamping force of 1,400 N and a max holding force of 1,625 N, values that translate directly into reliable workpiece retention during machining, assembly or inspection tasks. These figures allow planners to match the component to process forces, reducing the risk of slippage and rework. The clear numerical specification supports engineering decisions and helps quantify safety margins for process design, making load calculations and fixture validation more straightforward. Practical choice for workshops and small production lines Lightweight yet robust, the unit suits both craft workshops and production environments where a compact, dependable clamp is required. The combination of durable surface treatment and measurable force characteristics positions it as an effective solution for repeatable clamping tasks. Metav’s application advisers can provide guidance on fixture layout and integration, helping to align the clamp’s capabilities with the specific demands of machining or assembly processes. For durable clamping with clear performance data from Kukamet, contact Metav Werkzeuge in Emmerich for ordering and tailored technical advice by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 252-3 GTIN: 8680731504545 ETIM: EC011973 ECLASS: 21041717 Article: Vertikalspanner 252 Manufacturer: Kukamet Core specifications Material: galvanised steel Max clamping force: 1,400 N Max holding force: 1,625 N Weight: 0.27 kg Mounting: vertical foot Special features Compact lever clamp design Durable corrosion protection Suitable for fixture and jig integration Product images and datasheet available FAQ What is the mounting method for this clamp? The vertical-foot mounting secures the clamp to plates and bases; the Vertikalspanner 252 is designed for fixed attachment in fixtures. What clamping and holding forces does the clamp provide? The unit offers a max clamping force of 1,400 N and a max holding force of 1,625 N, suitable for secure retention in many machining and assembly tasks. Is the clamp suitable for series production use? Yes, the galvanised finish and compact lever design make this vertical clamp from Kukamet appropriate for repeatable operations on production lines. How heavy is the clamp and does weight affect fixture design? With a weight of 0.27 kg, the clamp is lightweight, allowing denser fixture layouts without significant added mass. Are technical documents or images available for planning? Datasheet and product images are available and referenced for the Vertikalspanner 252 to assist with fixture planning and integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base 1,400 N Clamping Force, 1,625 N Holding Force, Black Oxide - Kukamet
Take advantage of a compact lever clamp that combines a 1,400 N clamping force, a robust 1,625 N holding capacity and a space-saving horizontal foot to keep production and fixtures reliable; order the Vertical clamp 251 directly via Metav Werkzeuge or ask our consultants if needed Vertical clamp 251 – vertical lever clamp with 1,400 N clamping force The Vertical clamp 251 is a 90° lever clamp designed for stable fixturing and repeatable clamping in small to medium workshop assemblies Vertical lever clamp, 90° design Clamping force up to 1,400 N Holding force up to 1,625 N Horizontal foot for stable mounting Consistent clamping for repeatable production The 90° lever clamp delivers a defined 1,400 N clamping force that keeps components secure during machining and assembly. The separate holding specification of 1,625 N describes the maximum resistance against opening once set, which supports process stability in repetitive operations. By converting these numeric values into reliable fixture behaviour, the device reduces repositioning and inspection time, enabling more consistent cycle output and fewer stoppages caused by loose workpieces. Space‑saving mounting and fast fixture integration A horizontal foot base allows the clamp to be mounted on flat plates or fixture blocks without additional adapters, simplifying integration into existing jigs. Its right‑angle (90°) orientation positions the clamping arm clear of the workpiece, optimising accessibility and tool paths. At only 0.27 kg, the unit is lightweight for quick handling but rigid enough for stable operation, making it suitable for compact fixtures where footprint and easy reconfiguration matter. Durable surface and maintenance‑friendly design The blackened/brunished surface finish provides basic protection against wear and reduces glare at the workplace, while the simple lever mechanism avoids complex moving parts that require frequent servicing. The mechanical design is straightforward to inspect and lubricate, which shortens maintenance intervals and keeps downtime low. Supplied as a lever clamping element, the component is ideal where robust, no‑frills clamping is preferred over hydraulic or pneumatic alternatives. For reliable, compact clamping delivered through Metav Werkzeuge, contact our sales team to discuss the Vertical clamp 251 (SKU B251-3) and ensure the right fixture integration for your application Technical data Article number: B251-3 GTIN: 8680731508123 eClass: 21041717 ETIM: EC011973 Facts Clamping force (max): 1,400 N Holding force (max): 1,625 N Weight: 0.27 kg Angle: 90° Special features Mounting: horizontal foot Finish: blackened / brunished Type: lever clamp Manufacturer: Kukamet SKU: B251-3 FAQ What maximum clamping force does this clamp provide? The Vertical clamp 251 offers a maximum clamping force of 1,400 N, providing secure holding for typical workshop fixtures. How much holding force can be expected after clamping? Holding force for the unit is specified as 1,625 N, which indicates the resistance to opening once the lever is engaged. How is the clamp mounted to a fixture plate? Mounting is carried out via the horizontal foot, enabling direct attachment to flat plates or blocks without special adapters. What angle does the clamping arm have relative to the base? The clamping arm is positioned at 90°, which keeps the arm clear of the workpiece and simplifies tool access. Is the surface treated to reduce wear and corrosion? The component features a blackened / brunished finish that offers surface protection and reduced reflectivity for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base 2,000 N Thrust, 3,370 N Holding Force, Black Oxide Finish - Kukamet
Take advantage of reliable clamping performance and compact design to streamline fixture setup; the combination of 2,000 N clamping force, a robust blackened finish, and a stable horizontal base supports consistent results in small-series production. Order the clamp directly via Metav Werkzeuge or consult their specialists for application-specific advice. Vertical clamp 251 — Kukamet, 90° lever clamp with horizontal base and 2,000 N clamping force The Vertical clamp 251 is a horizontal-base lever clamp designed for 90° clamping applications in jigs, fixtures and assembly stations, offering rapid engagement and secure holding for repeatable production steps. Horizontal base for stable mounting Clamping force 2,000 N Holding force up to 3,370 N Consistent clamping that speeds up production The lever design delivers a defined clamping stroke and a clear mechanical advantage, providing a reproducible clamping force of 2,000 N and a holding force of 3,370 N. This results in uniform part retention across cycles, reducing rework and inspection time. The mechanical principle is simple to integrate into fixture plates and ensures the clamp remains engaged under process vibrations; the controlled action supports higher throughput when multiple clamps are used in parallel. Built for workshop durability and compact integration A blackened finish provides corrosion resistance and a subdued surface that minimises glare at the workbench. The compact unit, weighing 0.71 kg, mounts via a horizontal base and locates parts at a precise 90° angle, making it suitable for confined fixture spaces where robust contact and compact geometry are required. The construction supports long service life under normal workshop conditions and simplifies replacement without extensive rework of existing tooling. Faster set-up and simple handling for operators As a lever clamp, the device enables quick manual operation and rapid part changeovers, which translates into shorter setup times and improved takt in assembly processes. The clamp is well suited to repetitive tasks in small-batch production and fixturing; its mechanical action is easy to understand for operators and maintenance staff, reducing training effort. If uncertainty remains about compatibility with a specific fixture layout, Metav's technical advisors can provide guidance on integration and positioning. Contact Metav Werkzeuge for tailored fixture recommendations and specify the Kukamet vertical lever clamp 251 (SKU B251-4) for reliable 2,000 N clamping performance in your production setup Technical data SKU: B251-4 GTIN: 8680731508147 Manufacturer: Kukamet Category: Spanner Model: 251 Facts Clamping force (max): 2,000 N Holding force (max): 3,370 N Angle: 90° Weight: 0.71 kg EClass: 21041717 ETIM: EC011973 Special features Mounting: horizontal base Finish: blackened Type: lever clamp Special feature: none FAQ What clamping and holding forces does the clamp provide? The vertical clamp 251 provides a maximum clamping force of 2,000 N and a holding force of up to 3,370 N, suitable for reliable retention in assembly and fixturing tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal base; the unit is designed for secure attachment to fixture plates where a 90° clamping orientation is required. Is the surface finish suitable for workshop environments? Yes, the blackened finish offers basic corrosion protection and a low-reflective surface that is appropriate for standard workshop conditions. Can the clamp be used for quick manual part loading? The lever mechanism is intended for rapid manual operation and supports fast changeovers and straightforward handling in repetitive processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base Zinc Coated 470 N Thrust, 700 N Holding Force - Kukamet
Take advantage of a reliable, galvanised vertical clamp that combines robust holding force with compact installation; its horizontal foot mounting and 90° orientation make it suitable for repetitive jigs and fixtures. Order the unit directly via Metav Werkzeuge or contact our consultants for technical clarification. Vertikalspanner 251 – Vertical toggle clamp with galvanised finish and 90° angle (Kukamet) Vertikalspanner 251 is a compact vertical toggle clamp designed to secure workpieces at a fixed right angle in fixtures, assembly jigs and production aids. Galvanised steel construction Compact 90° vertical clamping Holding force up to 700 N Secure, measurable clamping for repeatable assembly The 251 model delivers precise, repeatable retention thanks to a defined clamping force and a higher holding force that keeps components stable during machining or assembly. The specified values of 470 N (clamping) and 700 N (holding) indicate the forces available during engagement and static retention respectively; this distinction helps when selecting a fixture for dynamic operations versus static holding. Using clear numerical data supports integration into process planning and risk assessment, ensuring the clamp meets required safety and functional margins. Built for workshop durability with a corrosion-resistant finish Constructed from galvanised steel, the clamp resists corrosion and routine workshop wear, extending maintenance intervals and reducing downtime. Its lightweight design at approximately 0.065 kg keeps added mass on moving fixtures minimal, which is beneficial for manual jigs or automated handlers where inertia and balance matter. The protective finish also simplifies cleaning and inspection routines, translating technical longevity into tangible productivity for everyday shop-floor use. Simple integration into fixtures and precise 90° positioning The clamp’s horizontal foot mounting enables straightforward attachment to plates and bases commonly used in jig construction, while the fixed 90° angle ensures consistent part orientation without adjustments. As a lever-operated toggle clamp, it offers rapid engagement and release, making it suitable for high-frequency production sequences and manual assembly stations. For bespoke fixture layouts or verification of compatibility with existing tooling, Metav’s specialists can provide application guidance and specification checks. Contact Metav Werkzeuge for personalised advice on the Kukamet Vertikalspanner 251, technical compatibility and delivery options from our Emmerich facility Technical data Article number: 251-2 GTIN: 8680731504231 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Clamping force: 470 N Holding force: 700 N Angle: 90° Weight: 0.065 kg Special features Material: galvanised steel Mounting: horizontal foot Type: vertical toggle clamp Special feature: none FAQ What forces does this clamp provide? The Vertikalspanner 251 provides a clamping force of 470 N and a holding force of 700 N, values intended for secure retention in assembly and light machining tasks. Is the clamp suitable for corrosive workshop environments? Yes, the galvanised finish on the Vertikalspanner 251 offers enhanced resistance to corrosion and workshop contaminants. How is the clamp mounted to a fixture? The clamp uses a horizontal foot mounting arrangement, allowing direct attachment to base plates and fixture boards used in jigs. Can the clamp be used for high-frequency manual assembly? Its lever-operated toggle mechanism is designed for rapid engagement and release, making the clamp well suited to frequent manual cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base, 470 N Thrust, 700 N Holding Force, Blackened - Kukamet
Take advantage of the combination of compact design, reliable holding force and straightforward fixture integration to maintain consistent production flow; order the clamp directly via Metav Werkzeuge or contact the consultants for application advice. Vertical clamp 251 by Kukamet — 90° vertical clamping, horizontal-foot mounting A Vertical clamp 251 intended for secure vertical workholding in light fixtures and jigs, offering reliable clamping and low installation footprint 90° clamping angle for vertical operations 700 N holding force for secure positioning Robust blackened finish for surface protection Lightweight 65 g for compact fixture design Stable clamping that reduces rework and setup time The clamp delivers a clear performance specification: 470 N as maximum clamping force and 700 N as maximum holding force. The first value describes the active closing force produced at the lever, while the second indicates the resistance against pull-out under load. This distinction matters for fixture design because higher holding force reduces the risk of workpiece movement during machining or assembly. The compact form factor supports dense placement in modular fixturing systems and is intended to improve throughput by lowering setup time and rework rates. Bold mechanical figures provide a verifiable basis for engineering decisions. Low-profile finish and simple mechanical integration A blackened finish provides basic surface protection and a uniform appearance suited to workshop environments; the finish also minimises reflections where visual inspection is required. The component mounts via a horizontal foot, which allows the clamping arm to operate at a fixed 90° angle relative to the base plate, simplifying mechanical integration into existing jigs. At only 65 g, the clamp imposes minimal additional mass on movable subassemblies, which benefits balance and reduces wear on positioning elements. These attributes support quick retrofitting and compact fixture layouts without the need for specialised mounting hardware. Where this clamp fits and why Metav supply matters The device is aimed at light engineering, small-batch production, assembly benches and inspection jigs where a dependable vertical clamping action is required. The straightforward mechanical concept makes it suitable for repetitive positioning tasks and temporary fixture setups. Procurement through Metav Werkzeuge ensures access to a wide range of complementary components and a consistent quality filter from a central European warehouse. That supply reliability helps maintain production continuity and reduces the administrative overhead associated with sourcing multiple vendors. For reliable light-duty vertical clamping, choose the Kukamet 251 and contact Metav Werkzeuge for technical advice and stock information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B251-2 GTIN: 8680731508109 Manufacturer: Kukamet Weight: 0.065 kg Facts Clamping force (max): 470 N Holding force (max): 700 N Angle: 90° Weight: 65 g Special features Material/finish: blackened (Schwarz brüniert) Mounting: horizontal foot Type: vertical clamp No special additional features FAQ What is the maximum clamping force of this clamp? The Kukamet vertical clamp 251 provides a maximum clamping force of 470 N and a maximum holding force of 700 N (SKU B251-2). How is the clamp mounted to a fixture? Mounting is done via a horizontal foot; the Kukamet 251 is designed for simple attachment to base plates or fixture blocks. Is the surface treated for corrosion resistance? The clamp has a blackened finish (Schwarz brüniert) which offers basic protection suitable for workshop environments on the Kukamet 251. What applications is this clamp best suited to? The clamp is intended for light engineering, assembly jigs and small-batch production where a compact 90° vertical clamping action is required. How heavy is the clamp and does that affect fixture balance? At 65 g (0.065 kg), the Kukamet 251 is lightweight and suitable for dense fixture arrangements without significantly affecting balance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Foot, Safety Lock, 1.4 kN Thrust, Zinc-Plated, 1625 N Holding Force - Kukamet
Take advantage of the combination of compact design, robust clamping force and built‑in safety locking for secure, repeatable fixturing in production and assembly. Order the clamp directly via Metav Werkzeuge or consult our specialists for mounting options. Vertical clamp 251 – zinc‑plated vertical clamp with safety lock by Kukamet A Vertical clamp 251 designed to secure workpieces at a 90° angle with a horizontal mounting foot, suited to jigs, fixtures and small‑batch production. Safety lock for secure clamping Zinc‑plated corrosion protection Max clamping force 1,400 N Horizontal mounting foot, 90° orientation Consistent clamping performance for repeatable processes The 90° clamping arrangement and measurable force ratings deliver consistent clamping across repeated cycles. With a max clamping force of 1,400 N and a holding force of 1,625 N, operators benefit from predictable fixture behaviour that reduces rework and shortens setup validation times. The integrated safety lock prevents unintended release during machining or handling, translating technical specifications into practical reliability on the shop floor. This performance focus supports faster throughput while maintaining component integrity. Built to withstand workshop conditions with compact handling The device’s zinc‑plated finish provides basic corrosion resistance, making the clamp suitable for standard workshop environments and intermittent exposure to coolant or humidity. At a compact weight of 0.27 kg, the component is easy to position and incorporate into modular fixturing systems without adding excessive mass to the assembly. The horizontal mounting foot enables low‑profile installation on fixtures and plates, saving space and simplifying alignment. These construction choices reduce maintenance needs and extend service life under normal operating conditions. Simple integration into fixtures and jigs Designed for straightforward installation, the clamp mounts in a fixed 90° orientation via its horizontal foot, offering repeatable alignment for series production or single‑station work. The unit’s clear mechanical function and minimal moving parts mean that setup and replacement are rapid, supporting lean workflows. For special applications, the clamp can be combined with other holding elements to create bespoke clamping arrangements. Product identification and compatibility are traceable via the supplied article and SKU references to support spare‑part management and inventory control. For tailored advice on Kukamet clamping solutions and to discuss how the Vertical clamp 251 fits specific fixturing needs, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange product selection and technical guidance. Technical data Article number: 251-3-L SKU: 251-3-L GTIN: 8680731504538 Manufacturer: Kukamet Key figures Max clamping force: 1,400 N Holding force: 1,625 N Angle: 90° Weight: 0.27 kg EClass: 21041717 ETIM: EC011973 Features & materials Material: Zinc‑plated Mounting: Horizontal foot Special feature: Safety lock Category: Spanner FAQ What maximum clamping force does the clamp provide? The Kukamet Vertical clamp 251 offers a maximum clamping force of 1,400 N and a holding force rated at 1,625 N. Is the clamp suitable for standard workshop environments? Yes, the zinc‑plated surface of the clamp gives basic corrosion resistance suitable for general workshop use and intermittent exposure to coolants. How is the unit mounted in a fixture? Mounting is via the horizontal foot in a fixed 90° orientation, allowing low‑profile attachment to plates and modular fixture systems. What is the weight of the clamp and how does that affect handling? The clamp weighs 0.27 kg, which makes it easy to position and replace in fixturing setups without adding undue mass. Does the clamp include a safety feature to prevent accidental release? A built‑in safety lock secures the clamping element in position and prevents unintended opening during machining or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Senkrechter Foot 2,000 N Thrust, 3,370 N Holding Force, Zinc-Plated - Kukamet
Take advantage of a compact, high-performance clamping solution that combines secure holding with corrosion-resistant durability; the unit delivers up to 2,000 N clamping force and a 3,370 N holding capability while remaining lightweight for easy fixture integration. Order the clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertical toggle clamp 252 — Kukamet vertical-foot clamp with 2,000 N clamping force A Vertical toggle clamp 252 designed for dependable workholding in fixtures, jigs and assembly stations where repeatable vertical clamping and a compact footprint are required Kukamet vertical toggle clamp, vertical-foot mount 2,000 N clamping force for secure holding 3,370 N maximum holding force Zinc-plated finish for corrosion resistance Consistent clamp force for repeatable production quality The vertical-foot toggle offers a defined clamping force of 2,000 N, ensuring repeatable contact pressure across cycles. In practice, this means reduced variability in parts positioning and fewer rejects when the clamp is used in jig-mounted operations. The difference between the specified clamping force and the 3,370 N holding force is deliberate: the clamping force denotes the active squeeze applied to the workpiece, while the holding force indicates the maximum load the mechanism can resist once closed. For production planners this translates into reliable fixture performance and predictable process control. Compact design that simplifies integration and maintenance With a compact mass of 0.71 kg and a vertical-foot mounting arrangement, the device fits into tight assemblies without compromising accessibility. The zinc-plated finish provides a protected surface that slows corrosion in workshop environments, extending service life and reducing downtime for replacement. The 90° orientation positions the handle clear of tooling zones, enabling safe actuation and straightforward retrofitting into existing clamping banks. The simple lever mechanism minimises moving-part complexity, supporting fast maintenance and low total cost of ownership. Practical benefits on the shop floor and in fixture design Specified as a robust toggle clamp for general-purpose fixturing, the unit supports a wide range of applications from light assembly to machining set-ups where vertical clamping is required. The design facilitates quick part loading and secure retention during secondary operations, improving throughput and operator ergonomics. Its galvanised surface and compact footprint make it suitable for mixed-material production environments where corrosion resistance and space efficiency matter. The clamp’s predictable behaviour aids process optimisation and simplifies operator training. For tailored advice on integrating the Kukamet vertical-foot toggle into existing fixtures, or to place an order through Metav Werkzeuge, contact our team for expert support and delivery details Technical data Article number: 252-4 GTIN: 8680731506006 SKU: 252-4 Manufacturer: Kukamet Core figures Clamping force (max): 2,000 N Holding force (max): 3,370 N Weight: 0.71 kg Angle: 90° Materials & design Material: zinc-plated Mounting: vertical-foot Category: clamp (Spanner) FAQ What is the difference between clamping force and holding force for this clamp? The clamping force of 2,000 N refers to the active squeeze applied to the workpiece when the Vertical toggle clamp 252 is engaged; the 3,370 N holding force specifies the maximum load the closed mechanism can resist without release. Can the clamp be mounted on a drill jig or assembly fixture? Yes, the vertical-foot mounting is intended for installation on jigs and fixtures where a vertical clamping action is required; the compact Kukamet unit integrates easily into standard fixture plates. Is the surface treatment suitable for humid or corrosive workshop conditions? The clamp’s zinc-plated finish provides corrosion resistance appropriate for general workshop environments and helps extend service life compared with untreated steel. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Vertical Base, 2,000 N Clamping Force, 3,370 N Holding Force, Blackened - Kukamet
The compact combination of high clamping capacity and a slim mounting footprint ensures dependable fixture performance; the 2000 N clamping force and 3,370 N holding force provide consistent workpiece security. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertical clamp '252' (B252-4) by Kukamet — 2000 N clamping force, 90° mounting The Vertical clamp '252' (B252-4) is a lever-operated vertical foot clamp designed for 90° workholding in jigs, fixtures and assembly stations. 2000 N clamping force for secure fixing 3,370 N holding force under load Vertical foot mounting at 90° operation Black oxide finish resists wear Reliable force for repeatable clamping Designed for industrial workholding, the Vertical clamp '252' (B252-4) delivers a 2000 N clamping force with a rated 3,370 N holding capability, ensuring consistent part retention during machining, assembly or inspection processes. These numerical ratings describe the peak clamping pressure and the static holding resistance respectively; in practice, the values translate into fewer repositions, reduced scrap rates and steadier cycle times. The specification supports applications where repeatability and process stability are priorities, allowing engineers to factor measured forces into fixture design and risk assessments. Space-saving mounting that speeds up fixture layout The clamp's vertical foot mounting and fixed 90° operating angle make it suitable for compact tooling arrangements and multi-level fixture plates. With a mass of 0.71 kg, the component keeps dead weight low and simplifies handling during assembly of jigs. The vertical mounting foot aligns the clamping arm for perpendicular engagement, which reduces interference with adjacent tooling and allows closer part nesting on plates. For workshop planners this means more efficient use of fixture real estate and quicker cycle integration, while maintaining the mechanical stability required for repeat operations. Durable finish and straightforward lever action for daily use Surface protection is provided by a black oxide finish, offering corrosion resistance and a matt appearance that reduces glare in production environments. The lever clamp operation is deliberately simple: a mechanical toggle action converts manual input into reliable clamping force with minimal maintenance. The finish combined with the straightforward mechanism results in long service life under normal workshop conditions and helps keep downtime low. Where routine cleaning and lubrication are scheduled, the clamp will continue to perform without complex servicing or specialist tools. For dependable 90° workholding from Kukamet, contact Metav Werkzeuge in Emmerich for ordering details or application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: B252-4 GTIN: 8680731508208 eClass: 21041717 ETIM: EC011973 Model: 252 Facts Max clamping force: 2000 N Max holding force: 3370 N Weight: 0.71 kg Operating angle: 90° Mounting type: vertical foot Special features Material / finish: black oxide finish Type: lever clamp Mounting: vertical foot Special features: none noted FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 2000 N; the holding capacity is specified at 3,370 N for the Vertical clamp '252' (B252-4). Which mounting method is required for installation? Installation uses a vertical foot mounting with a fixed 90° operating angle, suitable for integration into jigs and fixtures that require perpendicular clamping. What material and finish does the clamp have? The unit is supplied with a black oxide finish, which improves corrosion resistance and wear behaviour while keeping the visible surface matt. Is this clamp suitable for machining and assembly fixtures? Yes. The combination of 2000 N clamping force and 3,370 N holding force makes it suitable for many machining and assembly applications where secure, repeatable workholding is required. How heavy is the clamp and does it affect fixture design? The clamp weighs 0.71 kg, which supports compact fixture layouts and minimises added mass on movable or lightweight fixture plates. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With 1,400 N Push Force, 1,625 N Holding Force, Blackened Finish - Kukamet
Benefit from holding force 1,625 N, a 90° vertical mount and a compact, blackened finish for secure clamping in confined jigs and fixtures. Combine robust mechanical performance, low fixture weight and simple integration for uninterrupted production. Order the Vertical toggle clamp B252-3 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Vertical toggle clamp B252-3 – 90° vertical mounting, 1,625 N holding force The Vertical toggle clamp B252-3 is a lever-operated workholding device designed for vertical fixtures where reliable, repeatable retention is required in assembly, welding and machining operations. Vertical mount with 90° clamping angle Holding force 1,625 N for secure workholding Compact weight 0.27 kg for minimal fixture load Blackened finish for corrosion resistance Secure clamping that reduces rework and cycle times The clamp delivers a holding force of 1,625 N and a clamping force of 1,400 N, providing a measurable basis for fixture design and process reliability. These values translate directly into reduced part movement during operations, which helps lower scrap rates and minimise rework. The mechanism is a classic toggle clamp, which locks mechanically under load; this means the clamping action remains stable even during vibration-prone processes. For planners and production engineers, the documented forces enable straightforward calculation of safety margins and fixture requirements. Compact fixture design with easy vertical mounting With a mass of 0.27 kg and a vertical foot attachment, the component offers a very small footprint for space-constrained jigs. The compact design reduces inertial load on moving assemblies and simplifies multi-clamp layouts, enabling closer clamp spacing without compromising accessibility. Installation is designed to be systematic: the vertical mounting orientation secures parts from above and is particularly suited to operations where a perpendicular clamping force is advantageous. The small weight also contributes to faster handling during fixture assembly and easier logistics for modular tooling systems. Durable finish and consistent 90° positioning for long service life The item is supplied with a blackened finish, which provides basic surface protection and reduces glare in workshop lighting. The fixed 90° clamping angle ensures perpendicular retention and simplifies alignment checks during set-up. These characteristics together support consistent clamp positioning and extended service intervals. Where fidelity of repetitive positioning matters—such as in short-run assembly or precision welding—the combination of mechanical lock and protective surface reduces the likelihood of downtime due to surface wear or accidental slippage. Practical applications and integration into production workflows Engineered for jigs, welding fixtures, inspection stands and light machining fixtures, the clamp is suited to repetitive tasks where quick actuation and dependable retention are priorities. The mechanical locking principle shortens cycle times compared with manual fastening methods, and the measurable force data supports process validation and quality documentation. Integration into modular pallets and fixture plates is straightforward thanks to the vertical mounting arrangement, enabling rapid changeovers and consistent part location across production batches. For secure, space-efficient clamping choose the Kukamet vertical toggle clamp B252-3 — contact Metav Werkzeuge for procurement advice and technical clarification by e‑mail or telephone. Technical Data SKU: B252-3 GTIN: 8680731508185 Manufacturer: Kukamet Material: blackened finish Mounting: vertical foot Clamping angle: 90° Max clamping force: 1,400 N Max holding force: 1,625 N Weight: 0.27 kg ECLASS: 21041717 ETIM: EC011973 Core data Max clamping force: 1,400 N Max holding force: 1,625 N Weight: 0.27 kg Clamping angle: 90° Special features Blackened finish Vertical foot mounting Toggle clamp (lever clamp) No additional special features FAQ What types of fixtures suit this clamp? The clamp fits vertical jigs, welding fixtures and inspection pallets where perpendicular retention is required; the Vertical toggle clamp B252-3 integrates readily into modular fixture plates. How strong is the clamping action compared with holding force? The device provides a clamping force of 1,400 N and a holding force of 1,625 N, indicating a secure mechanical lock suitable for light to medium production loads. Which materials is the clamp appropriate for? The clamp is a general-purpose workholding device; use it for metal and fabricated components in assembly and light machining where the specified forces meet process requirements. How should the clamp be mounted? Mount on a prepared vertical plate using the vertical foot arrangement; ensure the fixture layout accommodates the 90° clamping angle for correct part engagement. Is any special maintenance required? Routine inspection and light lubrication of the pivot points is recommended to maintain reliable operation; the blackened finish provides basic corrosion protection but does not replace periodic checks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With 470 N Thrust, 700 N Holding Force, Black Oxide Finish - Kukamet
Compact design, positive toggle action and a sturdy blackened finish combine to deliver secure, repeatable clamping in confined fixtures; the combination of 470 N clamping force and 700 N holding capacity ensures reliable part retention. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 252 — Kukamet vertical lever clamp, 470 N, 90° The Vertical toggle clamp 252 is a vertical lever clamp designed for fixture and jig applications, offering a positive locking action at a 90° actuator angle for secure part retention in assembly and light machining tasks Vertical foot mounting for secure attachment 470 N maximum clamping force 700 N holding force for stable retention Blackened finish for surface protection Secure vertical clamping for production fixtures The Vertical toggle clamp 252 delivers a compact yet robust solution for repetitive fixture work. With a maximum clamping force of 470 N and a holding force of 700 N, the device secures components during machining and assembly; clamping force refers to the squeeze applied when the lever is engaged, while holding force describes the resistance to displacement once closed. The vertical lever action creates a positive lock that minimises movement under load and improves process reliability for jigs and small-batch production. Faster cycle times through simple lever operation A short stroke and a positive toggle mechanism enable rapid locking and release, reducing handling time and increasing throughput on both manual benches and semi-automated stations. The 90° actuator geometry keeps the operating lever clear of the workpiece while the low moving mass (0.065 kg) lowers inertia, aiding quick reciprocation and reducing wear on adjacent components. This combination of features supports consistent clamp engagement across repeated cycles, contributing to measurable efficiency gains in fixture operations. Durable finish and straightforward mounting for workshop rigs The clamp is finished in a blackened finish, which provides basic surface protection and a non-reflective appearance suited to industrial environments. Installation is via a vertical foot that simplifies attachment to fixture plates or tooling blocks and allows precise alignment at the required angle. As a compact lever clamp from Kukamet, it is intended for demanding, repetitive holding tasks where space, repeatability and dependable locking are decisive factors for process stability. For procurement and tailored technical advice on the Kukamet vertical toggle clamp 252, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com — our specialists can advise on fixture integration and delivery options. Technical data Article number: B252-2 GTIN: 8680731508161 Manufacturer: Kukamet Numbers / Core technical data Weight: 0.065 kg Max clamping force: 470 N Max holding force: 700 N Angle: 90° Special features Material: blackened finish Mounting: vertical foot Type: vertical toggle clamp FAQ What clamping and holding forces does the clamp provide? The Vertical toggle clamp 252 from Kukamet delivers up to 470 N clamping force and 700 N holding force, suitable for light to medium-duty fixture applications; SKU B252-2. How is the clamp mounted to a fixture? Mounting is via the vertical foot; the clamp aligns at a 90° orientation to the workpiece and is designed for attachment to fixture plates or tooling blocks. What does the blackened finish mean for workshop use? The blackened finish on the clamp offers basic surface protection against corrosion and a non-reflective appearance, making it suitable for industrial bench and jig environments. Is the clamp suitable for frequent automated cycles? The short stroke and toggle mechanism provide fast, repeatable action; the low weight (0.065 kg) reduces moving mass and supports frequent cycling with minimal inertia. Who supplies this clamp and what is the SKU? This clamp is supplied by Kukamet and is available via Metav Werkzeuge; product SKU is B252-2 and GTIN 8680731508161. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, 1.4 kN Thrust, Zinc Plated, 1.625 kN Holding Force - Kukamet
Take advantage of a compact, galvanised design paired with a reliable safety lock and measurable clamping performance — the result is steady, repeatable workholding for jigs and fixtures. Order the vertical clamp directly via Metav Werkzeuge or consult the product experts for integration advice. Vertical clamp 252 by Kukamet — galvanised, safety lock The Vertical clamp 252 is a compact, 90° toggle clamp engineered for secure vertical clamping in fixtures and jigs across production and workshop environments. Galvanised steel for corrosion resistance Integrated safety lock for secured clamping 90° orientation for vertical clamping operations Holding force up to 1,625 N Consistent clamping force for reliable machining The clamp delivers a defined clamping force of 1,400 N, which provides predictable holding performance in repeat operations. Measurable values such as the holding force of 1,625 N allow process planners to evaluate fixture safety margins and cycle stability. In practice, this means reduced repositioning, fewer interruptions during processing and a clear basis for fixture design decisions. The compact, low-mass construction contributes to agility in small assemblies while still supporting robust clamping behaviour. Built to last with low maintenance demands A galvanised finish offers effective corrosion protection, making the unit suitable for workshop environments where humidity or coolant exposure can occur. The device’s 0.27 kg mass and compact footprint facilitate integration into confined tooling layouts, and the vertical foot mounting ensures a firm anchoring point on plates or bases. These attributes combine to lower lifecycle maintenance needs and to keep downtimes to a minimum, supporting uninterrupted production sequences. Safe, ergonomic operation for repetitive tasks The built-in safety lock secures the clamp in the engaged position, preventing accidental release during handling or vibration-prone processes. The fixed 90° orientation is optimised for vertical clamping operations, enabling straightforward alignment of workpieces in vertical planes. Quick engagement and repeatable indexing reduce set-up time in jigs and fixtures, enhancing throughput without compromising operator safety or part integrity. Practical integration and quality assurance Supplied under Kukamet quality standards and bearing SKU 252-3-L, the clamp is suitable for standard fixture designs and straightforward to specify using the listed technical values. The construction and clearly stated forces support rational selection for tasks from light assembly to more demanding holding requirements. For buyers seeking a dependable component from a supplier with a European quality filter, Metav’s logistics and product range provide an easy path to procurement and inventory consolidation. Contact Metav Werkzeuge for technical matching and procurement assistance with the Kukamet vertical clamp 252 and ensure the component aligns with fixture specifications Technical data Article number: 252-3-L GTIN: 8680731504552 SKU: 252-3-L Facts Weight: 0.27 kg Clamping force (max): 1,400 N Holding force (max): 1,625 N Angle: 90° eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: vertical foot Safety feature: integrated safety lock Brand: Kukamet FAQ What clamping force does the clamp provide? The clamp offers a clamping force of 1,400 N and a holding force up to 1,625 N, allowing clear specification for fixture load calculations. Is the surface treated for corrosion resistance? Yes, the component is galvanised, providing protection against corrosion in workshop conditions. Can the clamp be mounted on a plate or base? The clamp uses a vertical foot mounting which is suitable for secure attachment to plates and fixture bases. Is there a locking mechanism to prevent accidental opening? An integrated safety lock secures the clamp in the engaged position to prevent unintentional release. Which SKU identifies this model for ordering and documentation? The product is listed under SKU 252-3-L and GTIN 8680731504552 for procurement and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, 2 000 N Thrust, Zinc Plated, 3 370 N Holding Force - Kukamet
Benefit from a compact, galvanised vertical clamp with a secure safety lock and defined clamping and holding forces for reliable workholding; order the unit directly via Metav Werkzeuge or ask our consultants for application advice. Vertical toggle clamp 252-4-L — Kukamet vertical clamp, galvanised with safety lock, 2,000 N clamping force A Vertical toggle clamp 252-4-L engineered for vertical mounting and secure 90° clamping in fixtures, jigs and assembly benches Galvanised steel construction for corrosion resistance Safety lock for secure engagement Vertical base with 90° clamping orientation 2,000 N nominal clamping force Consistent, measurable clamping performance for repetitive production The device delivers a nominal clamping force of 2,000 N, complemented by a maximum holding force of 3,370 N, which together provide reproducible retention for repetitive tasks. The distinction between the clamping and holding values means the clamp applies the required compressive force while retaining components against lateral movement or vibration. Built around a lever mechanism, the unit enables rapid engagement and release, reducing cycle time in fixture operations and supporting efficient throughput in small-batch and light industrial production. Designed for durability and safe operation in workshop environments Constructed from galvanised steel, the clamp resists corrosion in typical workshop atmospheres, which extends service life and lowers maintenance frequency. The integrated safety lock prevents unintended opening during handling or machining, increasing operator confidence and process reliability. Its vertical foot mounting and fixed 90° angle make the component straightforward to fit to vertical plates or fixture frames, while the compact mass of 0.71 kg minimises added load on subframes and jigs. These attributes support long-term availability and predictable performance in daily use. Simple integration into jigs, benches and assembly stations The lever-style mechanism offers a familiar interface for fitters and fabricators, enabling fast retrofitting into existing workholding setups or new fixture designs. The clamp’s footprint and mounting orientation allow for space-efficient placement where right-angle retention is required. For further specification checks—for example, to confirm compatibility with a particular fixture plate or to discuss batch supply—the item is supplied via Metav Werkzeuge, a precision partner with comprehensive distribution and technical support, ensuring consistent availability from the Emmerich warehouse. For tailored advice on implementing the Kukamet Vertical toggle clamp 252-4-L in specific fixtures or to arrange supply from Metav Werkzeuge’s Emmerich facility, please get in touch with our consultants Technical data Article number: 252-4-L GTIN: 8680731504590 Manufacturer: Kukamet ETIM: EC011973 ECLASS: 21041717 Facts Clamping force (max): 2,000 N Holding force (max): 3,370 N Weight: 0.71 kg Angle: 90° Special features Galvanised steel Vertical foot mounting With safety lock Category: Clamps FAQ What clamping force can be expected from this clamp? The Kukamet Vertical toggle clamp 252-4-L provides a nominal clamping force of 2,000 N and a maximum holding force of 3,370 N for reliable retention during assembly and light machining tasks. How is the clamp mounted in a fixture? Mounting is by a vertical foot arrangement designed for attachment to vertical plates or frames; the clamp secures components at a fixed 90° orientation. Does the surface finish resist workshop corrosion? Yes, the clamp is galvanised, giving protection against corrosion and improving longevity in standard workshop environments. What safety features are included? A mechanical safety lock is integrated to prevent accidental release of the lever during operation or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, 470 N Thrust, 700 N Hold Force, Zinc Plated - Kukamet
Take advantage of a corrosion‑resistant galvanised finish, an integrated safety lock and reliable clamping performance to keep fixtures secure and repeatable; order the Vertical Toggle Clamp 252 directly via Metav Werkzeuge or ask our consultants if needed. Vertical Toggle Clamp 252 — galvanised with safety lock (Kukamet) The Vertical Toggle Clamp 252 is a compact vertical clamp for secure fixture clamping at a 90° angle in production jigs and workshop assemblies Galvanised steel construction Integrated safety lock Vertical foot, 90° clamping angle Holding force up to 700 N Secure clamping with compact operation The clamp delivers controlled, repeatable holding thanks to a defined clamping force of 470 N paired with a higher holding force of 700 N, which secures parts during machining and assembly. Designed for compact fixtures, the device combines a small footprint with positive mechanical engagement, making it suitable where space is limited but consistent clamping is required. The safety lock prevents accidental release, supporting uninterrupted production flow and safer handling in repetitive applications. Durable construction for long service life Constructed with a galvanised finish, the unit resists corrosion in workshop environments and retains functional reliability over time. The lightweight yet robust design contributes to easy placement within modular jigs while reducing moving‑mass inertia during actuation. This balance of durability and low weight ensures the clamp remains dimensionally stable under regular load cycles, offering predictable behaviour for both manual and semi‑automatic fixtures. Fast integration into fixtures and jigs Fitted with a vertical foot and set for a 90° clamping angle, the toggle clamp is straightforward to mount on flat plates or locating blocks. Installation supports quick alignment and ensures repeatability when used in indexing fixtures or assembly stations. The compact mechanism permits direct use in small batches or series production, where secure, fast clamping improves throughput and reduces rework resulting from movement during processing. Contact Metav Werkzeuge for tailored advice on Kukamet's Vertical Toggle Clamp 252 and its integration into fixtures; reach our Emmerich team at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 252-2-L GTIN: 8680731504514 SKU: 252-2-L Facts Weight: 0.065 kg Clamping force: 470 N Holding force: 700 N Clamping angle: 90° eClass: 21041717 ETIM: EC011973 Materials & features Galvanised finish Mounting: vertical foot Integrated safety lock Category: Spanner Manufacturer: Kukamet FAQ What clamping and holding forces does the clamp provide? The Vertical Toggle Clamp 252 offers a clamping force of 470 N and a holding force of 700 N, providing secure retention for typical workshop and fixture tasks. Is the clamp suitable for use in humid or corrosive workshop conditions? Yes, the galvanised finish on the Kukamet Vertical Toggle Clamp 252 enhances corrosion resistance for improved service life in standard workshop environments. How is the clamp mounted in a fixture? The clamp features a vertical foot for direct mounting on fixture plates or blocks and is set up for a 90° clamping orientation for straightforward integration. Does the device include a safety mechanism to prevent accidental release? An integrated safety lock is provided on the Kukamet Vertical Toggle Clamp 252 to secure the clamping position and reduce the risk of unintended opening during handling. Is the clamp appropriate for small, space‑constrained jigs? Yes, the compact dimensions and lightweight design of the 252 make it suitable for small jigs and modular fixture systems where space and repeatability are key. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, Horizontal Base, 2 000 N Thrust, 3 370 N Holding Force, Zinc-Plated - Kukamet
The combination of robust galvanised construction and a 2,000 N maximum clamping force ensures dependable performance in production fixtures; the integrated safety locking provides secure fixation for repetitive operations. Order the unit directly via Metav Werkzeuge or consult our advisors for application guidance. Kukamet 251 vertical clamp – galvanised construction, 2,000 N clamping force The 251 vertical clamp is a compact clamping device designed for secure 90° mounting in jigs and fixtures across workshop and industrial environments. Galvanised steel construction for corrosion resistance 2,000 N maximum clamping force Safety locking mechanism for secure fixation Horizontal foot for stable 90° mounting Consistent clamping power for repetitive production tasks A solid galvanised finish combines corrosion resistance with a low-maintenance surface suited to workshop environments where durability matters. The unit delivers a maximum clamping force of 2,000 N and a holding force of 3,370 N, values that translate into reliable workpiece retention during machining, assembly or inspection routines. Thanks to the right-angled mounting and horizontal foot, fixture design is simplified, reducing setup time while maintaining consistent force transmission for repeatable results. Safer, quicker operation with integrated locking and lever action The clamping device features a safety locking mechanism that secures the clamp once engaged, reducing the risk of accidental release during handling or vibration-prone processes. The lever clamp principle enables rapid engagement and disengagement, supporting efficient cycle times on production lines and in manual jig operations. At just 0.71 kg, the component is lightweight for ease of positioning without compromising the robustness expected from an industrial clamp. Designed for integration and long-term reliability Compact dimensions and a horizontal mounting base make this clamp straightforward to incorporate into bespoke fixtures or standard tooling plates. The galvanised surface protects against surface corrosion, extending service life and lowering maintenance intervention. Specifying a compact vertical clamping device such as this supports lean tooling strategies by reducing the need for frequent replacements and by providing a predictable mechanical interface for repeatable assembly or machining processes. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 251 vertical clamp into production fixtures and for reliable delivery from Emmerich. Technical data Article number: 251-4-L GTIN: 8680731504576 Brand: Kukamet Material: galvanised steel Weight: 0.71 kg Facts Maximum clamping force: 2,000 N Holding force: 3,370 N Angle: 90° Weight: 0.71 kg Design & features Horizontal foot mounting Safety locking mechanism Galvanised finish Category: clamp FAQ What is the maximum clamping force of this clamp? The Kukamet 251 vertical clamp provides a maximum clamping force of 2,000 N and a holding force of 3,370 N for secure fixation. Is the clamp suitable for repeated use in a production environment? Yes, the galvanised construction and safety locking mechanism make the 251 appropriate for repetitive production cycles and long-term use. How is the clamp mounted? Mounting is via a horizontal foot designed for 90° installation, enabling stable integration into jigs and fixture plates. What is the unit weight and does that affect handling? The clamp weighs 0.71 kg, which aids manual positioning and installation without sacrificing mechanical stability. Does the clamp include a locking feature for safety? A safety locking mechanism is integrated to secure the clamp in the engaged position and reduce the chance of accidental release during operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, Horizontal Base, 470 N Thrust, 700 N Hold, Zinc Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a safety lock, reliable holding capacity and a space-saving horizontal base for quick integration into fixtures. The product delivers 470 N clamping force and 700 N holding force, ensuring steady workpiece fixation — order via Metav Werkzeuge or consult our specialists for tailored selection. Vertikalspanner 251 — Vertical clamp with safety lock and horizontal base (Kukamet) A Vertikalspanner 251 is a vertical toggle clamp designed for secure workpiece fixation in jigs and fixtures where a 90° clamping action and compact mounting are required. Safety lock for secure positioning 700 N holding capacity for stable fixation Zinc-plated finish for corrosion resistance Horizontal base for straightforward mounting Reliable fixation thanks to an integrated safety lock The clamp features an integrated safety lock that prevents unintentional release during handling and machining. With a rated 470 N clamping force and 700 N holding force, the device offers a predictable and quantifiable grip suitable for repetitive tasks in production and assembly lines. The zinc-plated finish provides corrosion resistance, which maintains consistent performance over time and reduces maintenance intervals. This results in fewer interruptions during batch processing and a more dependable clamping routine in fixtures and jigs. Space-saving mounting and straightforward installation This vertical clamp has a horizontal base that simplifies attachment to plates, fixtures or modular locating systems, enabling quick retrofitting without major design changes. At approximately 0.065 kg, its compact construction allows multiple units to be deployed across a fixture plate without adding significant mass or obstructing access. The right-angle actuation at 90° ensures predictable motion paths and clearance, aiding tool access and reducing collision risk during automated handling or manual loading. Built for repeatable workflows and industrial use Designed for repetitive clamping operations, the component supports consistent cycle times and improved repeatability in production processes. Its robust holding values and corrosion-resistant surface make it suitable for general workshop environments and light industrial applications where reliable part securing is essential. Integration into existing jigs is eased by the standardised mounting footprint and toggle action, helping to standardise fixture design and reduce set-up time. For specific application advice or clarification of technical details, Metav’s consultants are available to provide informed guidance and selection support. Secure reliable clamping for your fixtures through Metav Werkzeuge — contact our technical team via info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: 251-2-L GTIN: 8680731504491 Manufacturer: Kukamet Facts Max clamping force: 470 N Max holding force: 700 N Angle: 90° Weight: 0.065 kg Special features Horizontal base mounting Safety locking mechanism Zinc-plated finish Brand: Kukamet FAQ How is the clamp mounted to a fixture? The Vertikalspanner 251 is mounted via its horizontal base; the base permits simple bolting to fixture plates and modular tooling systems. What holding capacity can be expected for small workpieces? The device provides a holding force of 700 N and a clamping force of 470 N, values specified for the Vertikalspanner 251 to ensure stable fixation in assembly and jig applications. Is the surface protected against corrosion? Yes, the clamp is zinc-plated, giving the unit improved resistance to corrosion suitable for typical workshop environments. Which applications suit this vertical toggle clamp best? The product is intended for jigs, fixtures and light production tasks where compact, repeatable vertical clamping and a safety lock are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Upright Base 470 N Thrust, Zinc Plated 700 N Hold Force - Kukamet
Combining a 90° vertical mounting, a galvanized finish and a strong holding force of 700 N, the clamp provides dependable, repeatable clamping for jigs and fixtures. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for application support. Vertikalspanner 252 — Vertical lever clamp with 90° mounting by Kukamet Vertikalspanner 252 is a compact vertical lever clamp engineered for secure 90° fixturing in production lines and workshop jigs, offering corrosion resistance and a high holding capacity for repetitive operations. Vertical mounting with 90° angle Galvanized finish for corrosion resistance Holding force 700 N, clamping 470 N Compact design, only 65 g weight Secure vertical clamping for repeatable fixtures The vertical lever design delivers a consistent holding force of 700 N while the operating mechanism provides a clamping force of 470 N, which together ensure components remain stable during machining and assembly. These measurable forces translate into fewer reworks and faster cycle times, improving process reliability. The clamp’s behaviour under load is predictable, supporting stable setups in serial production and reducing time spent on manual repositioning. Corrosion-resistant, lightweight construction for long service life Manufactured in galvanized steel and weighing just 0.065 kg (65 g), the unit combines low mass with robust surface protection to resist rust in workshop environments. The compact footprint eases integration into narrow fixture plates and keeps overall jig weight down, which is beneficial when tooling is frequently swapped. The galvanized finish reduces maintenance intervals and preserves clamping accuracy over prolonged use, supporting sustainable uptime. Fast handling and smooth integration into jigs Designed with a vertical foot mounting and a fixed 90° angle, the clamp fits standard fixture patterns and provides rapid actuation for repetitive tasks. The lever mechanism enables quick manual engagement and disengagement, speeding up clamping cycles without special tools. With its small form factor and clear mechanical specification, the component simplifies fixture design and allows consistent operator handling, contributing to a smoother workflow on the shop floor. For reliable 90° vertical clamping from Kukamet, contact Metav Werkzeuge for supply and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific jigs and applications Technical data SKU: 252-2 GTIN: 8680731504507 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 Numbers / Core technical data Holding force: 700 N Clamping force (max): 470 N Weight: 0.065 kg (65 g) Angle: 90° Special features Material: galvanized Mounting type: vertical foot Type: lever clamp No special features listed FAQ What is the maximum holding force of this clamp? The vertical clamp offers a holding force of 700 N as specified for secure clamping in repetitive fixtures. Can this clamp be used where corrosion resistance is required? Yes, the clamp has a galvanized finish to provide enhanced corrosion resistance for workshop environments. How heavy is the clamp and why does that matter? At 0.065 kg (65 g), the unit is very lightweight, which helps keep fixture mass down and simplifies handling during tool changes. Is the clamp suitable for integration in 90° fixturing systems? The clamp features a fixed 90° vertical mounting and a vertical foot, making it suitable for standard right-angle fixture arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Zinc Plated Horizontal Foot, 2,000 N Thrust / 3,370 N Holding Force - Kukamet
Take advantage of a compact, high-force clamping solution that combines reliable holding power and corrosion-resistant finish for long service life. Order directly via Metav Werkzeuge or contact our advisors for application support. Vertical lever clamp 251 by Kukamet — galvanised, 2000 N clamping force The Vertical lever clamp 251 is a compact vertical clamping device for rapid workpiece fixation in fixtures and jigs, engineered for secure 90° positioning with a horizontal foot for straightforward mounting. 2000 N clamping force 3370 N holding force Galvanised steel finish Horizontal foot, 90° mounting Consistent clamping power for repeatable production The clamp delivers a rated 2000 N clamping force and a 3370 N holding force, ensuring reproducible fixation in repetitive operations. These figures indicate the maximum active clamping pressure and the static retention capacity respectively; the distinction matters when setting stop blocks or designing fixtures. The robust force values reduce slippage and rework, improving throughput and process stability while lowering inspection overhead. The galvanised surface adds corrosion resistance, so the mechanical performance is retained in workshop environments where humidity or coolant exposure is present. Compact mounting for versatile fixture layouts Designed with a horizontal foot and a fixed 90° clamping orientation, the unit integrates simply into modular tooling plates and welded fixtures. With a mass of 0.71 kg, the clamp minimises additional load on moving subassemblies and allows multiple units to be deployed without excessive weight build-up. The horizontal foot simplifies alignment: the base fastens to the mounting plane and the lever action provides a clear vertical clamping travel, making cycle timing predictable and repeatable in automated or manual setups. Durable construction and straightforward function Constructed from galvanised steel, the clamp resists surface corrosion while offering the mechanical toughness expected for daily shop-floor use. The lever mechanism is a proven toggle-style design, converting operator or actuator motion into high clamping force with positive lock at the end position; this ensures the workpiece remains secured even under vibration. The Kukamet unit (SKU 251-4) is thus suitable for production jigs, assembly stations and maintenance tooling where quick engagement and reliable holding are essential. Basic installation requires common fasteners and minimal adjustment, which keeps setup time low and maintenance tasks simple. For reliable repeat clamping and fast integration, consider the Kukamet vertical lever clamp 251—contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 251-4 GTIN: 8680731504569 Brand: Kukamet Material: galvanised Data Clamping force (max): 2000 N Holding force (max): 3370 N Weight: 0.71 kg Angle: 90° Special features Mounting: horizontal foot Category: Clamps No special additional features indicated FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum active clamping force of 2000 N; the static holding capacity is 3370 N for the Kukamet vertical lever clamp (SKU 251-4). Can the clamp be mounted on standard fixture plates? Yes — the unit features a horizontal foot for straightforward attachment to fixture plates and is designed for a 90° clamping orientation suitable for most jig layouts. What material is the clamp finished in and how does that affect durability? The clamp is galvanised, which improves corrosion resistance for workshop conditions and helps maintain mechanical reliability over time. Is the clamp suitable for automated actuation or manual use? The toggle lever principle delivers repeatable mechanical advantage for both manual operation and mechanical or pneumatic actuation; the compact mass (0.71 kg) supports integration into automated stations. Which applications are typical for this type of clamp? Typical uses include production jigs, assembly fixtures, and maintenance tooling where quick engagement, predictable clamping travel and secure retention are required — as provided by the Kukamet vertical lever clamp 251 (SKU 251-4). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
91mm Vertical Clamp 3000N Thrust, Massive Holding Arm, Zinc Plated - Kukamet
The compact design and galvanised steel construction deliver reliable, low-maintenance clamping with a 91 mm arm and a robust holding arm rated to 3,300 N, ensuring secure workholding and consistent production quality. Order directly via Metav Werkzeuge or consult our specialists for specification support. 213 Vertical Clamp — 91 mm arm, galvanised (Kukamet) The 213 Vertical Clamp is a compact vertical clamping device for secure, repeatable workholding in workshop and light production environments, suited to assembly fixtures and jigs. Massive holding arm for stable clamping 91 mm arm length for compact workstations Galvanised steel body for corrosion resistance Consistent clamping for reliable production flow The clamping unit offers a consistent holding force that supports repeatable positioning and reduces rework. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device provides measurable performance for specification-driven processes. These figures enable planners and buyers to compare the unit directly with other workholding elements and to calculate fixture safety margins. The compact 91 mm arm minimises intrusion into the machining envelope while the relatively low mass contributes to easy handling during fixture assembly. Durable design reduces lifecycle maintenance Constructed from galvanised steel and fitted with a massive holding arm, the clamping device is designed for daily workshop demands. The protective galvanised finish lowers corrosion risk in humid environments and extends service intervals compared with untreated components. The angle-base mounting provides a secure connection to frames or plates, simplifying integration into modular fixturing systems. Overall, the design reduces downtime and supports continuous operation with minimal upkeep. Clear data for specification and integration Technical characteristics are compact and directly applicable to fixture design: arm length, clamping forces, material and mounting type define compatibility with existing assemblies. The device is supplied as a ready-to-install vertical clamp with an angle base for secure attachment. Its sub-kilogram weight makes it suitable for applications where added mass must be limited. Where documentation is required, the SKU and GTIN permit exact identification for purchasing, stocking and traceability in production logistics. For robust, specification-backed clamping from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 213-4-D-C1 GTIN: 8680731502039 eCl@ss: 21041717 ETIM: EC011973 Facts Arm length: 91 mm Max pressing force: 3,000 N Max holding force: 3,300 N Weight: 0.921 kg Special features Material: galvanised steel Mounting: angle base Massive holding arm Category: clamp (spanner) FAQ What clamping forces does the 213 Vertical Clamp provide? The 213 Vertical Clamp delivers a maximum pressing force of 3,000 N and a holding force of 3,300 N, values suitable for many light production and fixture applications. Which mounting method is used for the clamp? The clamp is fitted with an angle-base mounting for secure attachment to frames, plates or modular fixture systems. What material and finish does the clamping unit have? The clamping device is manufactured from galvanised steel to enhance corrosion resistance and reduce maintenance intervals. Is the arm length suitable for compact fixtures? With a 91 mm arm length, the clamping element is intended for compact workstations and fixtures where space is limited. Can the clamp be identified for ordering and traceability? Yes. The unit is available under SKU 213-4-D-C1 and GTIN 8680731502039 for precise ordering and inventory control. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
91mm Vertical Clamp With Angle Base, Solid Holding Arm, 3,300 N Hold Force, 3,000 N Thrust - Kukamet
Take advantage of a robust, compact clamping solution that combines a solid 91 mm holding arm, a high clamping force of 3,000 N, and a compact weight for easy fixture integration; order the clamp directly via Metav Werkzeuge or request advice from our consultants if technical details are required. Kukamet Vertical clamp 213 — vertical clamping device with 91 mm arm and massive holding arm Kukamet Vertical clamp 213 is a compact vertical clamping device designed for secure workholding in jigs, fixtures and small assembly stations, combining a sturdy holding arm with a space-saving angled base for flexible installation. Solid 91 mm holding arm for deep clamping Angle-base mounting for stable positioning High clamping force up to 3,000 N Blackened finish resists wear Confident, measurable clamping for reliable production The clamp delivers a measured clamping force of 3,000 N and a maximum holding force of 3,300 N, providing quantifiable retention for repeatable processes. These force values (expressed in newtons) indicate how much linear force the device exerts and retains under load; this makes the unit suitable where defined clamping performance is required. The solid holding arm and compact design reduce elastic deflection during operation, which in turn improves process stability and reduces rework. For production planners and workshop managers the result is predictable fixturing and fewer rejects. Flexible installation that fits tight assembly layouts An angle-base mounting allows the clamp to be secured to fixture plates or machine tables without consuming excessive vertical space; the design supports quick integration into existing tooling layouts. At 91 mm arm length the device reaches into shallow recesses while keeping the overall footprint small. With a weight of approximately 0.921 kg, the clamp is light enough for modular fixture assemblies yet heavy enough to feel solid in use. These characteristics facilitate retrofitting into assembly jigs and make the clamp well suited for batch production or maintenance fixtures where space economy and rigidity are both priorities. Built for durability and low maintenance Constructed with a massive holding arm and a blackened finish, the clamp is prepared for continuous workshop use. The robust arm geometry resists bending under cyclical loads and the surface treatment reduces visible wear from handling and contact. The straightforward mechanical design minimises service points and simplifies routine inspection, which helps keep downtime and maintenance costs low. Where continuous uptime matters, the device’s simple, sturdy construction supports long-term reliability. Practical applications and workshop compatibility The clamp is intended for use in fixtures, assembly benches and jigs where vertical retention is required. Typical applications include securing components during machining setups, holding parts for welding or soldering operations and stabilising workpieces in inspection fixtures. Its compact form and standard mounting allow straightforward incorporation into bespoke fixtures or modular tooling systems, offering a practical alternative where a compact, high-force vertical clamp is needed. Select Kukamet quality for secure, compact clamping — contact Metav Werkzeuge for ordering or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification and integration Technical Data Article number: B213-4-D-C1 GTIN: 8680731508017 Model: 213 Brand: Kukamet Facts Arm length: 91 mm Clamping force (max): 3,000 N Holding force (max): 3,300 N Weight: 0.921 kg eClass: 21041717 ETIM: EC011973 Special features Mounting: angle base Massive holding arm Finish: blackened FAQ What is the maximum clamping force of this clamp? The Kukamet Vertical clamp 213 provides a maximum clamping force of 3,000 N, with a holding force rating up to 3,300 N, which gives a clear performance metric for secure fixturing. How is the clamp mounted to a fixture or plate? The Kukamet Vertical clamp 213 is fitted for an angle-base mounting, permitting secure attachment to fixture plates or machine tables and enabling low-profile installation. What is the usable reach of the holding arm? The clamp’s holding arm has a reach of 91 mm, offering access into shallow recesses and suited for compact jig and fixture arrangements when space is limited. What finish and construction quality can be expected? The Kukamet Vertical clamp 213 features a massive holding arm and a blackened finish, designed for durability and reduced visible wear during regular workshop use. Which production tasks is this clamp best suited to? This vertical clamp is intended for fixturing, assembly and machining set-ups where compact, repeatable vertical clamping is required; the Kukamet Vertical clamp 213 integrates easily into jigs, fixtures and modular tooling systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
92/102mm Quick-Change Tool Holder Head Gr. C With Eccentric Clamp, 40° Indexing 40mm Bore - TECWERK
Take advantage of rapid tool changes with eccentric clamping and repeatability of 0.01 mm for consistent production quality; order the component directly via Metav Werkzeuge or consult our specialists for application-specific advice. Quick-change toolholder head Gr. C (TECWERK) — eccentric clamping with 40-position indexing The Quick-change toolholder head Gr. C is designed for rapid swapping of turning tools while preserving precise alignment and repeatability in metalworking setups. Eccentric clamping for fast tool swaps Repeatability of 0.01 mm for consistent parts 40-position indexing in 9° increments Hardened and ground gearing and seating surfaces Reduce setup time with precise quick changes The combination of eccentric clamping and a secure seating design enables significantly faster changeovers compared with conventional clamping methods, reducing machine downtime and increasing throughput. The mechanism maintains a repeatability of 0.01 mm, which translates into fewer adjustments after each swap and less scrap. The tip height is adjustable via a set screw, allowing correct tool alignment without shims; this feature simplifies setup routines for both single-piece flow and batch production. Greater flexibility through indexed positioning and reach control With 40-position indexing offering 9° steps, the head allows fine angular adjustment of cutting tools to suit a variety of operations and geometries. The central bore of Ø 40 mm and a maximum reach of 92 / 102 mm (centre of bore to end/edge) provide clear information for planning tool envelopes and collision checks. These measurable parameters help integrators and workshop planners to layout fixtures and determine clearance quickly, supporting efficient cell design and predictable cycle times. Robust construction for long service life and consistent accuracy The drive teeth and contact faces are hardened and ground, reducing wear and preserving the locating accuracy over extended use. The hardened planar seating and precision-cut teeth ensure that the indexed positions remain stable under cutting loads, which reduces recalibration frequency and life-cycle costs. The design therefore supports a higher degree of process reliability and contributes to dependable part conformity in demanding turning applications. For tailored advice or to obtain a quote for the TECWERK quick-change toolholder head Gr. C, contact Metav Werkzeuge — our specialists in precision solutions can assist with compatibility checks and order processing. Technical Data Article number: 2000832153NW Manufacturer: TECWERK Product type: Quick-change toolholder head Gr. C SKU: 2000832153NW Facts Bore diameter: 40 mm Max reach: 92 / 102 mm Repeatability: 0.01 mm Indexing positions: 40 (9° steps) Special features Eccentric clamping for rapid tool changes Tip height adjustable by set screw Hardened and ground gearing Hardened and ground seating/planar contact 40 teeth enabling 40 angle settings FAQ How accurate is the positioning after a tool change? The head provides a repeatability of 0.01 mm, ensuring consistent repositioning after each change. What angular resolution is available for tool orientation? Indexing is available in 40 positions with 9° increments, allowing fine adjustment of the cutting edge orientation. What is the bore diameter and how does it affect mounting? The central bore is 40 mm; it is the diameter of the main body bore used for mounting and alignment in the turret or toolpost. Can the tip height be corrected without shims? Yes — the tip height is set using a set screw on the toolholder, permitting straightforward height adjustment during setup. What ensures long-term durability of the indexing mechanism? The teeth and seating faces are hardened and ground, which minimises wear and keeps indexed positions stable under load. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
92mm Reduction Sleeve MK2 to MK1 Hardened Ground DIN 2185, Inner and Outer Ground - TECWERK
Benefit from conformity with DIN 2185, a fully hardened and ground finish, and a precise MT2-to-MT1 fit that supports reliable tool holding and repeatable setups — order directly via Metav Werkzeuge or consult our specialists for application advice. Reducing sleeve DIN 2185 MT2→MT1, hardened and ground — TECWERK A reducing sleeve (DIN 2185) designed to adapt MT2 tooling to an MT1 spindle, fully hardened and ground for precision workshop use. DIN 2185 standard compliance Hardened and ground inside/outside Converts MT2 to MT1 interfaces Overall length 92 mm Precise taper adaptation for consistent machining results The reducing sleeve delivers a controlled taper transition between a larger and a smaller Morse interface, ensuring accurate concentricity and repeatable positioning. Conforming to DIN 2185, the component is intended for setups where a reliable mechanical fit is essential. By converting an MT2 holder to accept MT1 tooling, the sleeve reduces the need for multiple holders, simplifying tool management and saving setup time in production and repair environments. Robust, serviceable construction to reduce downtime Manufactured in the hardened and ground execution, the sleeve offers elevated wear resistance and stable contact surfaces. The internal and external finishing — hardened and ground — helps maintain seating accuracy over repeated insertions and removals, which translates into fewer indexing errors and lower maintenance frequency. For workshops that prioritise uptime, the material treatment and precision grinding contribute directly to longer service intervals and consistent part quality. Easy integration into workshop workflows and tool holders Installation is straightforward: the component mates directly with standard Morse taper interfaces, enabling rapid tool changes without special adapters. The 92 mm overall length provides sufficient engagement depth for secure holding while remaining compact for tight spindle envelopes. Because the sleeve follows an established standard, it integrates seamlessly with existing chucks, arbors and tailstocks that accept Morse tapers, supporting flexible utilisation across milling, drilling and reconditioning tasks. Reliability and traceability through industry standards Choosing a sleeve produced to DIN 2185 offers clear technical expectations: dimensional accuracy, surface finish and hardness are governed by recognised norms, which supports quality control and documentation in industrial environments. The TECWERK execution emphasises precision finishing and hardened surfaces, which is particularly relevant for operations that expect consistent repeatability across batches and demand confidence in clamping interfaces. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK reducing sleeve into existing toolholding systems — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for technical clarification and order support Technical data Article number: 2000832352NW Standard: DIN 2185 Type: Reducing sleeve Facts Overall length: 92 mm Inner taper: MT1 Outer taper: MT2 Packaging unit: 1 Special features Fully hardened and ground inside and outside For tools with Morse taper interfaces Execution: hardened and ground Suitable for conversion of spindle/toolholder taper sizes FAQ What taper sizes does the reducing sleeve convert? The reducing sleeve converts an MT2 outer taper to an MT1 inner taper; the TECWERK reducing sleeve (SKU 2000832352NW) is specified for this MT2→MT1 adaptation. Is the sleeve compliant with recognised standards? Yes, the sleeve is manufactured to DIN 2185, which defines the dimensional and finishing requirements for this type of taper adapter. How does the hardened and ground finish benefit workshop use? The hardened and ground surfaces on the TECWERK reducing sleeve improve wear resistance and maintain seating accuracy over repeated use, supporting consistent concentricity and longer service life. Can this component be used in milling and drilling setups? The sleeve is suitable for general toolholding applications where a Morse taper adaptation from MT2 to MT1 is required; it integrates with standard chucks and holders that accept Morse tapers. What is the overall length and why is it relevant? The overall length is 92 mm, which provides adequate engagement for secure holding while remaining compact enough for typical spindle and arbor arrangements. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
94mm Massiver Haltearm Vertikalspanner, 750N Druckkraft, senkrechter Fuß - Kukamet
Kompakt, robust und funktional: Der Vertikalspanner bietet mit seinem massiven Haltearm, der Haltekraft von 1.000 N und einer Druckkraft von 750 N zuverlässige Spannlösungen für Werkstatt und Fertigung. Die Bauform mit senkrechtem Fuß ermöglicht einfache Montage und stabile Positionierung; bei offenen Fragen technische Details oder Bestelloptionen direkt über Metav anfragen. Vertikalspanner von Kukamet Der Vertikalspanner ist ein Hebelspanner für präzise Spannaufgaben in Werkstatt und Produktion und wurde für stabile Haltekräfte und einfache Montage konzipiert. **Vertikalspanner»212« von Kukamet Massiver Haltearm für sichere Spannkräfte Haltekraft bis 1.000 N für stabile Fixierung Kompakter Arm: 94 mm Reichweite Befestigung über senkrechten Fuß möglich Dauerhafte Konstruktion für wiederholte Belastung Der Spanner überzeugt durch seinen massiven Haltearm, der aus schwarz brüniertem Material gefertigt ist und dauerhafte Resistenz gegen Verschleiß bietet. Diese robuste Ausführung reduziert Nacharbeit und erhöht die Lebensdauer in stärker beanspruchten Arbeitsumgebungen. Dank der kompakten Bauweise bleibt die Spannvorrichtung handlich, ohne Stabilität einzubüßen, was sie besonders geeignet macht für Werkstätten mit begrenztem Platz. Leistung und Sicherheit bei Spannprozessen Mit einer Druckkraft von 750 N und einer Haltekraft von 1.000 N eignet sich das Spannmittel für Anwendungen, bei denen konstante Fixierung wichtig ist. Die Kraftwerte ermöglichen sicheres Halten auch bei wiederkehrenden Bearbeitungen, wodurch Werkstücke weniger verrutschen und Fertigungsqualität steigt. Das erleichtert präzise Bearbeitungen und minimiert Nacharbeit. Einfache Montage und flexible Verwendung Die Befestigungsart mit senkrechtem Fuß erlaubt eine direkte Montage auf Maschinentisch oder Vorrichtung und sorgt für platzsparende Integration. Der 94 mm lange Arm bietet eine nützliche Reichweite für die übliche Spannhandhabung, das geringe Gewicht von 0,163 kg erleichtert Austausch und Positionsanpassung. Dadurch wird die Handhabung im Alltag effizienter und ergonomischer. Zielgruppe und empfohlene Einsatzgebiete Entwickelt für Handwerk und Industrie, richtet sich das Spannmittel an Anwender in Metallverarbeitung, Maschinenbau und Montage. Dort wird Wert gelegt auf schnelle Fixierung, Wiederholgenauigkeit und robuste Komponenten. Durch die einfache Befestigung und kompakte Abmessungen eignet sich das Produkt besonders für Arbeitsplätze mit häufigem Rüsten und kurzen Umrüstzeiten. Empfehlung: Das Kukamet Vertikalspanner 212 für zuverlässige Spannlösungen direkt über Metav beziehen — bei technischen Fragen oder Bedarf an weiteren Daten gerne per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: B212-1-D-C2 Marke: Kukamet Bezeichnung: Vertikalspanner 212 Zahlen Gewicht: 0,163 kg Arm: 94 mm Druckkraft max: 750 N Haltekraft max: 1.000 N Besonderheiten Befestigungsart: senkrechter Fuß Material: Schwarz brüniert Massiver Haltearm Storytrigger: hebelspanner FAQ Wie hoch ist die maximale Haltekraft des Vertikalspanner von Kukamet? Der Vertikalspanner von Kukamet erreicht eine maximale Haltekraft von 1.000 N und eignet sich damit für sichere Fixierung bei vielen Bearbeitungsaufgaben. Ist der Haltearm des Kukamet Vertikalspanner 212 besonders belastbar? Ja, das Modell 212 verfügt über einen massiven Haltearm, der für erhöhte Dauerfestigkeit konzipiert ist und sich für wiederholte Spannvorgänge eignet. Auf welche Weise wird der Vertikalspanner B212-1-D-C2 montiert? Die Montage erfolgt über den senkrechten Fuß, wodurch das Bauteil einfach auf Maschinentischen oder Vorrichtungen befestigt werden kann.
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com