Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
95° 62mm Pneumatic Clamp With Horizontal Foot, 1,200 N Closing / 1,400 N Holding, Galvanised Body - Kukamet
Robust galvanised construction, a 62 mm massive holding arm and up to 1,400 N holding force provide reliable, repeatable clamping for production fixtures—order the Pneumatic clamp 611 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 611 by Kukamet — horizontal foot, 1,400 N holding force Pneumatic clamp 611 is a compact pneumatic clamping solution designed for repeatable workpiece retention in jigs, fixtures and automated production stations, featuring a horizontal foot for stable mounting. Robust galvanised construction Horizontal foot for stable mounting 62 mm solid holding arm Holding force 1,400 N; clamping 1,200 N Secure clamping through engineered strength The 611 is built with a galvanised body and a massive holding arm, giving mechanical stability where consistent force and repeatability matter. A specified holding force of 1,400 N combined with a clamping force of 1,200 N ensures that components remain fixed during machining, assembly or inspection tasks. These numerical values allow planners to calculate fixture loads and safety margins precisely, reducing rework and downtime. The solid arm geometry also minimises deflection under load, which supports tighter process tolerances. Stable installation and fast pneumatic operation Designed with a horizontal foot, this clamp mounts flush to base plates and fixture frames for a low-profile, secure installation. The device operates by pneumatic actuation, offering short cycle times and straightforward integration with compressed-air control circuits. With an actuation angle of 95°, the mechanism produces a clear mechanical advantage for generating the rated forces while maintaining compact stroke travel. The combination of predictable motion and pneumatic speed makes the clamp well suited to semi-automated or fully automated production lines. Durable finish and workshop suitability The galvanised finish protects the clamp against corrosion in workshop environments and keeps maintenance demands low. Materials and surface treatment are chosen for long service life in industrial use, supporting continuous operation with minimal intervention. Supplied by an established partner network, the product benefits from consistent quality checks and spare-part availability, which helps sustain production uptime over the long term. Choose the Kukamet 611 for dependable pneumatic clamping in production—contact Metav Werkzeuge for application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 611-2-D-C1 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Category: Spanner Facts Clamping force max: 1,200 N Holding force max: 1,400 N Arm length: 62 mm Angle: 95° Materials and features Galvanised finish Massive holding arm Horizontal foot mounting Pneumatic actuation FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 1,400 N as specified for the Kukamet Pneumatic clamp 611 (SKU 611-2-D-C1). Is the clamp suitable for automated production lines? Yes. The model uses pneumatic actuation and a compact stroke profile, which supports short cycle times and integration into automated fixtures. How is the clamp mounted to a fixture? The clamp is mounted using its horizontal foot, which allows secure attachment to base plates and fixture frames for stable operation. What protection does the surface treatment provide? A galvanised finish reduces corrosion risk and lowers maintenance requirements, making the clamp suitable for workshop and industrial environments. Can the clamp handle heavy or vibrating operations? The combination of a massive holding arm and rated holding force of 1,400 N makes this clamp appropriate for many demanding tasks; assess application-specific loads when designing fixtures Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 67mm Pneumatic Clamp Horizontal Base Massive Holding Arm 2,000N Pressing Force, 2,500N Holding Force - Kukamet
Take advantage of the combination of a robust galvanised body, a massive holding arm and reliable pneumatic actuation to secure faster cycle times and consistent clamping force. Order the clamp via Metav Werkzeuge or consult the Metav team for specification support. Pneumatic Clamp 611 by Kukamet — 2,500 N holding force, 67 mm arm A Pneumatic Clamp 611 designed for horizontal-foot mounting, delivering heavy-duty clamping in production fixtures and assembly stations Robust galvanised construction Max holding force 2,500 N 95° locking angle for secure clamping Horizontal-foot mounting for stable fixing Built for repeatable, heavy-duty clamping The unit is engineered to deliver a consistent holding force of 2,500 N, with a maximum applied pressure force of 2,000 N, ensuring reliable fixation of workpieces under load. The clamp’s 67 mm arm length combines reach with stability, while the massive holding arm reduces bending and wear during repetitive cycles. Constructed from galvanised steel, the clamping device resists corrosion in workshop environments, so fixture integrity is maintained over long production runs. Where process repeatability matters, this clamping solution provides standardised performance that can be defined in fixture documentation and incorporated into automated cells. Faster setup and safer operation for production workflows Pneumatic actuation allows the clamping action to be completed quickly and without manual force, reducing cycle time and operator strain. The mechanism locks at a 95° angle, which enhances positional security and prevents unintentional release during machining or handling. The horizontal foot mounting method guarantees a low-profile, rigid attachment to fixture plates, enabling a compact layout and straightforward integration into jigs. Because the unit was conceived for industrial handling, fixture designers benefit from a compact footprint and repeatable actuation that supports throughput improvements and stable quality control. Long service life and versatile application scope The clamping unit’s galvanised finish and solid construction are tailored for continuous use in workshops and light industrial environments. The substantial arm and durable mechanism are suitable for repetitive clamping tasks in assembly, welding and general fixturing where secure holding is essential. The pneumatic design simplifies linkage to existing compressed-air systems and permits controlled actuation sequences when combined with valves or PLC control. The model 611 fits as a standardised component in a modular tooling strategy, offering longevity and predictable maintenance intervals to support operational continuity. Contact Metav Werkzeuge for specification assistance and secure supply of the Kukamet 611 pneumatic clamp — technical advice and reliable delivery from Emmerich are available. Technical data SKU: 611-3-D-C1 GTIN: 8680731504880 Model: 611 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Core data Arm length: 67 mm Locking angle: 95° Max pressure force: 2,000 N Max holding force: 2,500 N Mounting: horizontal foot Design & features Material: galvanised steel Actuation: pneumatic Massive holding arm Horizontal-foot mounting Robust construction for repetitive use FAQ What clamping force can be expected from this unit? The Kukamet Pneumatic Clamp 611 provides a maximum holding force of 2,500 N and a maximum applied pressure force of 2,000 N as stated in the technical data. Is the clamp suitable for integration into automated fixtures? Yes. The pneumatic actuation and horizontal-foot mounting make the unit suitable for integration into automated and semi-automated fixtures in production environments. What materials is the clamp made from and how is it protected against corrosion? The body is made from galvanised steel, providing corrosion resistance appropriate for workshop conditions and preventing premature surface degradation. Can the clamp be mounted on a flat fixture plate? Yes. The clamp is designed for a horizontal-foot mount, enabling secure attachment to flat fixture plates and stable performance during machining or assembly. How does the 95° locking angle benefit safety and process stability? The 95° locking angle improves positional security, reducing the risk of accidental release during machining or handling and contributing to safer, more stable processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 750N Pneumatic Clamp Horizontal Base Massive Holding Arm Zinc-Plated, 1000N Retention - Kukamet
Take advantage of precise, repeatable clamping with a robust galvanised construction and a compact 94 mm arm that suits confined fixtures; the combination of reliable pneumatic actuation and a 1,000 N maximum holding force supports steady production flow. Order the Pneumatic clamp directly via Metav Werkzeuge or ask the consultants for tailored fixture recommendations. Pneumatic clamp 631 — Galvanised, 1,000 N holding force by Kukamet A Pneumatic clamp 631 for automated workholding in jigs and fixtures, designed with a horizontal foot and a compact 95° actuation angle for secure, space-saving installation Galvanised steel body for corrosion resistance Pneumatic actuation with 750 N operating force Up to 1,000 N maximum holding force Horizontal-foot mount for stable fastening Consistent clamping performance for efficient production The clamp delivers pneumatic actuation with a rated actuation force of 750 N, producing a maximum holding force of 1,000 N. In practice, this difference between operating and holding force means a short, powerful clamp stroke that secures workpieces reliably while maintaining a safety margin against dynamic loads. Repeatability of pneumatic actuation reduces setup variation and shortens cycle times on assembly lines and machining fixtures. A 94 mm clamping arm provides practical reach in compact jigs without requiring additional counter‑bracing, supporting steady throughput and fewer stoppages for readjustment. Built for durability and low maintenance The body is finished in a galvanised finish, which protects bare metal from corrosion in humid or coolant‑exposed environments, extending service life and reducing maintenance frequency. A massive holding arm provides rigidity where it matters, limiting elastic deformation under load and keeping clamped parts immobile during machining. The robust construction translates into predictable clamping behaviour and fewer rejects caused by movement, cutting down rework and saving labour time over long production runs. Space-conscious mounting and fixture integration Designed with a horizontal foot for secure attachment, the clamp integrates cleanly into modular fixtures, pallets and machine tables. The 95° actuation angle offers compact kinematics that keep the tool path clear while enabling topside access for loading and unloading. Installation requires a regulated compressed-air supply and straightforward mounting; pneumatic piping and valve selection determine cycle speed and synchronisation with other clamping elements, allowing easy integration into automated sequences without complex redesign. Practical benefits for workshop and production planners As a lever-clamping solution, the item offers predictable clamping cycles with minimal operator handling, improving ergonomics and process safety. The galvanised surface and heavy-duty arm reduce lifecycle cost through longevity rather than component turnover. For industrial users seeking dependable repeatability in medium-duty fixtures, this clamp supports high uptime and consistent product quality while simplifying fixture design and maintenance planning. Contact Metav Werkzeuge for personalised fixture advice and procurement of the Kukamet Pneumatic clamp 631 — technical consultants available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss integration and delivery from Emmerich Technical data SKU: 631-1-D-C2 Model: 631 Type: Pneumatic clamp Manufacturer: Kukamet Category: Spanner Facts Arm length: 94 mm Operating force (max): 750 N Holding force (max): 1,000 N Actuation angle: 95° Finish: Galvanised Special features Massive holding arm Horizontal-foot mounting Pneumatic actuation Designed for lever-clamping applications FAQ What is the maximum holding force of this clamp? The Kukamet Pneumatic clamp 631 (SKU 631-1-D-C2) provides a maximum holding force of 1,000 N. Which actuation force should be expected during operation? Rated actuation force for the clamp is 750 N, which refers to the pneumatic drive force during the clamping stroke. What surface protection does the clamp have? The clamp is supplied with a galvanised finish to improve corrosion resistance in workshop environments. How is the clamp mounted in a fixture? Mounting is by a horizontal foot, allowing secure fastening to jigs, pallets or machine tables with standard fasteners. Is the 94 mm arm suitable for confined assemblies? A 94 mm arm length provides compact reach for confined fixtures while maintaining sufficient clearance for common loading operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 750N Pneumatic Clamp With 1,000N Holding Force, Horizontal Base, Zinc Plated, Massive Holding Arm - Kukamet
Compact, galvanised clamping unit with a 114 mm arm, 750 N pressing capacity and up to 1,000 N holding force — engineered for dependable, short-cycle workholding. Order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 631 — galvanised, horizontal‑foot mounting (Kukamet) A Pneumatic clamp 631 intended for secure fixture clamping in production and assembly environments, offering fast pneumatic actuation and robust retention. Galvanised body for corrosion resistance Robust 114 mm arm for stable clamping 1,000 N maximum holding force Horizontal-foot mounting for base fixation Consistent clamping performance for repetitive processes The compact clamping unit delivers defined actuation and repeatable retention thanks to its pneumatic operation and calculated force ratings. A specified 750 N pressing force achieves reliable contact during the clamping stroke while the separate 1,000 N holding capacity secures the workpiece under load. The 114 mm arm gives a stable lever length for fixtures where clearance and reach matter, and the approximately 95° operating angle provides a clear clamping travel that can be accommodated in compact jigs. Such measured values support predictable cycle times and reduce rework through improved positional stability. Robust construction to reduce maintenance intervals Constructed in galvanised steel and equipped with a massive holding arm, this clamping device resists corrosion and wear in workshop conditions. The surface treatment contributes to long service life in environments with regular handling and coolant exposure, while the heavy-duty arm resists deformation under repeated load. The horizontal‑foot mounting simplifies secure base attachment and distributes forces into the fixture plate, decreasing the likelihood of loosening during operation. Together, these design choices reduce downtime and the frequency of component replacement, supporting continuous production workflows. Integration and typical applications in fixtures and jigs The clamp is suited to assembly, machining fixtures and small-series production where pneumatic actuation accelerates cycle throughput. Its horizontal-foot configuration allows installation on horizontal fixture plates or subplates; the lever-style operation integrates well with guided slide systems and modular clamping rails. The unit’s geometry and force values make it suitable for: light to medium-duty holding, repeatable positioning in short-cycle milling and drilling operations, and automated assembly stations where reliable retraction and engagement are required. When specifying the device for a fixture, consider the listed forces and arm length to match holding requirements and prevent overloading adjacent components. Contact Metav Werkzeuge for a detailed specification sheet, application advice and supply from the Emmerich quality hub. Technical data SKU: 631-1-D-C3 Model: 631 Manufacturer: Kukamet Facts Arm length: 114 mm Operating angle: 95° Maximum pressing force: 750 N Maximum holding force: 1,000 N Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Pneumatic actuation FAQ What clamping and holding forces does this unit provide? The Kukamet pneumatic clamp 631 offers a pressing force of 750 N and a maximum holding force of 1,000 N as specified for consistent workpiece retention. How is the clamp mounted to a fixture? Mounting is achieved via a horizontal foot; the design suits attachment to horizontal fixture plates or subplates for stable base fixation. Is the construction suitable for humid or coolant‑exposed environments? Yes, the galvanised finish enhances corrosion resistance, supporting use in workshops where moisture or emulsions are present. What is the effective arm length and how does that affect fixture design? The arm measures 114 mm, providing reach for many small fixtures; selection should consider lever length to ensure required clamping travel and clearance. Can the clamp be used in automated short‑cycle applications? The pneumatic actuation and defined operating angle make the unit appropriate for short‑cycle automated fixtures where repeatable engagement and fast retraction are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 1,200 N Clamping Force, 1,400 N Holding Force, Galvanised Heavy-Duty Arm - Kukamet
Take advantage of a robust heavy-duty arm and a high holding capability to ensure stable workholding in repetitive operations; the galvanised finish offers corrosion resistance for workshop environments. Order the Pneumatic Clamp 612 directly via Metav Werkzeuge or consult our specialists for application advice. Pneumatic Clamp 612 — horizontal-foot pneumatic clamp with 1,400 N holding force (Kukamet) The Pneumatic Clamp 612 is a compact industrial clamp designed for secure fixture and repetitive workholding in machining, assembly and general workshop applications. Robust heavy-duty holding arm Horizontal foot for secure mounting 112 mm reach for versatile clamping Galvanised steel for corrosion resistance Consistent, measurable clamping power for reliable production The clamp delivers a 1,400 N holding force combined with a 1,200 N actuation force, providing measurable and repeatable retention for fixtures and jigs. These figures translate into dependable holding performance under pneumatic actuation, reducing the need for manual rework and improving cycle-time predictability. The performance metrics support rational decision‑making for production planners aiming to standardise on dependable workholding components. Simple integration and flexible mounting for diverse setups Equipped with a horizontal foot mounting, a 112 mm reach and a 95° closing angle, this clamp integrates into existing workstations and fixture plates with minimal adaptation. The horizontal base allows low-profile installation where vertical clearance is limited, while the arm reach offers accessibility to a broad range of workpiece geometries. Such mechanical options make this clamp suitable for assembly lines, CNC fixtures and repetitive manual operations where consistent positioning is required. Built for durability and straightforward upkeep in busy workshops Constructed with a galvanised steel finish and a massive holding arm, the unit resists corrosion and mechanical wear typical in industrial environments. The robust construction reduces maintenance intervals and contributes to long service life, supporting continuous production. For those seeking dependable workholding from a single component, this clamp offers straightforward handling and low lifecycle overhead when used in standard pneumatic systems. For reliable supply and specification support for the Kukamet Pneumatic Clamp 612, contact Metav Werkzeuge in Emmerich for tailored recommendations and secure delivery to the workshop. Technical Data SKU: 612-2-D-C2 Model: 612 Brand: Kukamet Facts Arm reach: 112 mm Maximum actuation force: 1,200 N Maximum holding force: 1,400 N Closing angle: 95° Material: galvanised steel ECLASS: 21021004 ETIM: EC011973 Special features Horizontal foot mounting Massive holding arm Galvanised finish Catalogue page available (PDF) FAQ What clamping forces does the clamp provide? The Kukamet Pneumatic Clamp 612 offers a maximum holding force of 1,400 N and a maximum actuation force of 1,200 N, enabling stable retention in repetitive processes. Is the clamp suitable for use in humid or workshop environments? Yes, the Pneumatic Clamp 612 is finished in galvanised steel, which gives enhanced resistance to corrosion common in workshop and industrial settings. How is the clamp mounted to a fixture plate? The unit uses a horizontal foot mounting that allows secure bolting to plates or bases, offering a low-profile installation for confined spaces. Can the clamp be used on CNC fixtures and assembly jigs? The combination of a 112 mm reach and a 95° closing angle makes this clamp suitable for a wide range of fixtures, including CNC setups and repetitive assembly applications. Where can detailed technical documentation be obtained? Technical documentation and the catalogue page for the Kukamet Pneumatic Clamp 612 are provided with the product listing; Metav Werkzeuge can supply additional datasheets on request. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 1200 N Push Force, 1400 N Hold Force, Zinc Coated Massive Arm, Horizontal Foot - Kukamet
Take advantage of a galvanised, heavy‑duty pneumatic clamp that delivers consistent clamping at a 95° angle and up to 1,400 N holding force; the robust horizontal‑foot mounting and 112 mm holding arm ensure secure fixturing and long service life. Order the unit directly via Metav Werkzeuge or consult Metav’s specialists for integration advice. Pneumatic Clamp 611 – heavy‑duty pneumatic clamping unit by Kukamet, galvanised, 1,400 N holding force The Pneumatic Clamp 611 is a pneumatic clamping unit designed for fixture and jig applications in production and assembly environments, featuring a horizontal‑foot mounting and a robust holding arm for repeatable, secure clamping. Robust galvanised construction 1,400 N maximum holding force 112 mm heavy-duty holding arm Horizontal-foot mounting, 95° clamping angle Dependable force and repeatability for productive workflows With a rated maximum holding force of 1,400 N and pneumatic actuation, the clamp provides reliable, repeatable fixturing that reduces rework and speeds up setup times. The pneumatic drive translates control signals into consistent clamping strokes, so cycle consistency is improved and process variability is reduced. This makes the device particularly suitable for medium‑ to high‑volume assembly where stable clamping pressure and fast actuation contribute directly to throughput. The combination of consistent force and a defined 95° clamping angle simplifies fixture design and ensures predictable part orientation during machining or assembly. Built to resist workshop conditions and lower maintenance burden The housing and arm are galvanised, providing corrosion resistance in humid or exposed workshop environments; the massive holding arm construction and 112 mm reach deliver mechanical stiffness that keeps parts firmly located under load. Horizontal‑foot mounting offers straightforward attachment to standard fixture plates, and the solid arm profile minimises flex during clamping. These design choices reduce the need for frequent adjustments and extend intervals between service, contributing to lower life‑cycle intervention and decreased downtime. Easy integration into existing jig and fixture systems The pneumatic design of the clamping unit allows direct integration with common compressed‑air control systems and valve banks, making it compatible with automated or semi‑automated production lines. The horizontal foot layout suits bench fixtures and tooling plates where lateral access is required; the compact arm length supports both small components and larger assemblies with a predictable clamping stroke. Clear specification of holding and actuation forces enables engineering teams to size valves and regulators correctly, supporting safe, efficient implementation on assembly lines or inspection rigs. Contact Metav Werkzeuge today for technical guidance and to arrange delivery of the Pneumatic Clamp 611 from Emmerich — Metav’s consultants can advise on fixture integration and supply options Technical data Article number: 611-2-D-C2 Name: Pneumatic Clamp 611 Manufacturer: Kukamet GTIN: 8682843523537 eClass: 21021004 ETIM: EC011973 Core measurements Arm length: 112 mm Maximum holding force: 1,400 N Maximum actuation force: 1,200 N Clamping angle: 95° Materials & special features Material: galvanised Mounting: horizontal foot Massive holding arm Pneumatic actuation Heavy‑duty construction FAQ What materials can the clamp be used with? The Pneumatic Clamp 611 from Kukamet is a general‑purpose clamping unit; material compatibility depends on fixture design rather than the clamp itself, and the 1,400 N holding force suits a wide range of metals and components when used with appropriate workpiece supports. How is the clamp mounted to a fixture plate? Mounting uses the horizontal‑foot interface; the 611 is designed for secure attachment to standard tooling plates and can be integrated into jigs where lateral access and a 95° clamping action are required. Is the clamping force adjustable? Clamping force is controlled via the pneumatic supply and valve settings; the Pneumatic Clamp 611 delivers up to 1,400 N holding force when supplied and regulated according to application requirements. Can the clamp operate in humid or corrosive shop environments? Yes, the galvanised finish and heavy‑duty arm improve resistance to corrosion and workshop wear, making the unit suitable for typical industrial conditions when maintained according to standard practice. Which SKU should be ordered for this model? Order reference: SKU 611-2-D-C2 for the Pneumatic Clamp 611 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 2,000 N Clamp Force, 2,500 N Holding Force, Zinc Plated Heavy-Duty Arm - Kukamet
Take advantage of the combination of fast, repeatable clamping and robust construction for uninterrupted production cycles; the galvanised finish and solid holding arm ensure long service life while the high clamping forces secure workpieces reliably. Order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 612 by Kukamet — Galvanised, 2,500 N holding force The Pneumatic clamp 612 is a horizontal-foot pneumatic lever clamp with a rigid 167 mm arm, designed for secure workholding in production and assembly environments Galvanised steel construction Robust 167 mm holding arm Holding force up to 2,500 N Horizontal-foot mounting Reliable clamping performance for continuous production The clamp delivers a holding force of 2,500 N and an actuation force rated at 2,000 N, providing consistent retention for repetitive tasks and medium-duty fixtures. These figures describe the mechanical capacity: holding force denotes the maximum static force the device resists before slip, while actuation force refers to the pneumatic input that moves the lever. The clear performance envelope supports process planning and contributes to predictable cycle times in industrial assembly and machining jigs. Durable materials and low-maintenance design Constructed in galvanised steel with a massive holding arm, the unit is engineered to withstand workshop wear and occasional exposure to moisture without rapid corrosion. The heavy-duty arm and reinforced pivot points reduce flex under load, which preserves clamp alignment and minimises adjustment frequency. This robustness translates into fewer interruptions for repair and a lower total cost of ownership over the service life. Compact mounting and reliable positioning Designed for horizontal-foot mounting, the clamp occupies a modest footprint while offering a 95° clamping angle for positive engagement and quick part release. The 167 mm arm gives a good reach-to-stability ratio for fixtures where access is limited but firm support is required. The lever-style arrangement combines mechanical advantage with pneumatic speed, making the component suitable for fixture plates, assembly lines and automated jigs where secure, repeatable positioning is essential. Faster cycles and safer handling with pneumatic actuation Pneumatic actuation provides rapid, hands-free clamping that improves throughput and operator safety compared with manual levers. The mechanism supports high repeatability, reducing part rework caused by inconsistent clamping. Integrated into a production cell, the clamp contributes to streamlined workflows and repeatable quality, especially when paired with standard pneumatic control valves and simple maintenance checks. Contact Metav Werkzeuge today to secure the Kukamet Pneumatic clamp 612 for dependable, low-maintenance workholding — our consultants in Emmerich will advise on integration and supply options Technical data Article number: 612-3-D-C3 Manufacturer: Kukamet Material: Galvanised steel Mounting: Horizontal-foot Arm length: 167 mm Angle: 95° SKU: 612-3-D-C3 Facts Actuation force max: 2,000 N Holding force max: 2,500 N Arm: 167 mm Angle: 95° eClass: 21021004 ETIM: EC011973 Special features Massive holding arm Galvanised finish Horizontal-foot mounting Lever-style pneumatic clamp FAQ What maximum holding force does this clamp provide? The Pneumatic clamp 612 from Kukamet offers a maximum holding force of 2,500 N, which secures workpieces reliably for many assembly and fixture applications. How is the clamp mounted to a fixture? Mounting is via a horizontal-foot base designed for secure attachment to fixture plates and jig bases. Is the clamp suitable for production environments with occasional moisture? Yes, the galvanised steel construction of the Kukamet pneumatic clamp provides enhanced corrosion resistance appropriate for workshop conditions. What is the effective reach of the clamping arm? The unit features a 167 mm holding arm, offering a practical balance between reach and rigidity for typical jig and fixture layouts. Which clamping angle does the device use? The clamp operates with a 95° clamping angle, providing positive engagement and quick release for repeatable positioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 2000 N Clamping Force, 2500 N Holding Force, Zinc Coated Massive Arm – Kukamet
Take advantage of the combination of robust pneumatic actuation and a massive holding arm for reliable, repeatable clamping in production and workshop fixtures; order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 631 Pneumatic Clamp — 2,000 N actuation, 2,500 N holding force The 631 pneumatic clamp is a compact pneumatic clamping element designed for fixture and jig applications in production and workshop environments. Robust zinc-plated construction 2,000 N pneumatic actuation force 2,500 N maximum holding force Horizontal-foot mounting for stability Reliable clamping performance that reduces rework The pneumatic drive delivers a clear, measurable actuation energy, with a 2,000 N nominal actuation force and a 2,500 N maximum holding force. This ratio ensures secure part retention during machining cycles, reducing movement-related rejects and downtime. The distinction between actuation and holding force is important for fixture design: the actuation value describes the force applied by the mechanism, while the higher holding value indicates the clamp’s capacity to resist separation under load — a practical advantage when repeatable, vibration-resistant clamping is required. Built for durability and stable installation Constructed from zinc-plated steel and fitted with a massive holding arm, the unit resists corrosion and mechanical wear typical of shop environments. The horizontal-foot mounting provides a low-profile, stable base that simplifies integration into fixtures or tooling plates and improves resistance to lateral loads. The 167 mm arm length offers an extended reach for deeper components while maintaining leverage for firm contact. These elements together extend service life and lower maintenance intervals. Easy integration into existing fixtures and minimal upkeep The device’s compact layout and standardised mounting allow quick installation into existing jigs; the horizontal-foot interface reduces alignment time on assembly stations. Fewer moving parts and the robust arm design limit routine adjustments, resulting in predictable maintenance cycles. For automated or semi-automated lines, the clamp’s pneumatic actuation is compatible with common compressed-air systems, enabling straightforward control via valves and pressure regulation while supporting consistent cycle times. For specification checks, integration advice or to request the Kukamet 631 pneumatic clamp (SKU 631-3-D-C3) for fixture trials, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 631-3-D-C3 GTIN: 8682843521625 Manufacturer: Kukamet Core specifications Actuation force (max): 2,000 N Holding force (max): 2,500 N Arm length: 167 mm Clamping angle: 95° Materials & features Zinc-plated construction Massive holding arm Horizontal-foot mounting ECLASS: 21021004 ETIM: EC011973 FAQ What maximum holding force does the clamp provide? The maximum holding capacity is 2,500 N; the Kukamet 631 pneumatic clamp is specified for secure retention in demanding cycles. Which mounting method is required for installation? The device is designed for horizontal-foot mounting, providing a stable interface for fixture plates and jigs. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation of the 631 is compatible with standard compressed-air systems and valve controls used in automated lines. What material and surface protection does the product have? The clamp is zinc-plated, offering corrosion resistance appropriate for workshop and production environments. What is the arm reach of the clamp? The holding arm measures 167 mm, allowing extended reach for deeper components while maintaining clamping leverage. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 2000 N Closing Force, 2500 N Holding Force, Galvanised Massive Arm Horizontal Base - Kukamet
Benefit from a robust, galvanised design, a 2,500 N maximum holding force and a compact 95° locking angle for precise, slip-free workholding; order the pneumatic toggle clamp 612 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Pneumatic Toggle Clamp 612 — 2,500 N holding force, galvanised finish 612 is a pneumatic toggle clamp engineered for secure fixture integration and fast cycle times in production and assembly applications *Robust galvanised construction *High holding force 2,500 N *117 mm heavy-duty arm *Horizontal-foot mounting for fixtures Secure clamping that reduces machining rejects The galvanised steel body provides a durable corrosion-resistant surface that maintains clamping integrity over many cycles. With a maximum holding force of 2,500 N and a pneumatic actuation input of up to 2,000 N, this clamp converts air pressure into reliable retention, reducing workpiece movement during machining or assembly. The result is fewer rejects, higher process stability and consistent part quality across repeat runs. Heavy-duty arm for dependable reach and clearance A 117 mm heavy-duty arm and a massive holding arm design deliver both reach and rigidity where it matters. The clamp’s 95° locking angle offers secure engagement with minimal overtravel, ensuring repeatable positioning in fixtures and jigs. This mechanical stability translates to predictable set-up times and lower fixture maintenance, supporting higher uptime in demanding production environments. Integration-friendly mounting for jigs and automation The horizontal foot mounting simplifies installation into existing tooling plates, modular fixture systems or automated workstations, allowing quick retrofit without major redesign. Pneumatic operation enables rapid cycle times and straightforward connection to shop compressed-air supplies, making the clamp suitable for semi-automated and automated lines. The galvanised finish also supports use in harsher shop-floor conditions. Clear technical data for engineering selection Specification essentials are presented plainly for procurement and design teams: galvanised material, holding force 2,500 N, actuation force 2,000 N, 117 mm arm length and horizontal-foot mounting. The compact form factor and repeatable performance make selection straightforward for engineers planning fixture layouts or upgrading existing clamping systems. The model is supplied with a clear SKU and GTIN for inventory tracking and BOM management. For reliable fixture performance and expert procurement support, request a detailed technical datasheet or place an enquiry for the Kukamet pneumatic toggle clamp 612 through Metav Werkzeuge — contact our advisors in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored guidance and fast supply Technical Data SKU: 612-3-D-C2 GTIN: 8680731501681 Manufacturer: Kukamet Mounting: horizontal foot Material: galvanised Facts Arm length: 117 mm Holding force max: 2,500 N Actuation force max: 2,000 N Locking angle: 95° Special features Massive holding arm Horizontal-foot mounting Galvanised finish eCl@ss: 21021004 ETIM: EC011973 FAQ What is the maximum holding force of this clamp? The maximum holding force is 2,500 N for the Kukamet pneumatic toggle clamp 612, specified for stable workpiece retention in production fixtures. Can the clamp be mounted directly to a fixture plate? Yes, the clamp features a horizontal foot mounting that permits direct installation into fixture plates and modular tooling systems. What material is the clamp made from and why does it matter? The clamp is made from galvanised steel; the galvanised finish improves corrosion resistance and extends service life in typical workshop environments. What arm length does the clamp provide and what benefit does that give? The clamp uses a 117 mm arm, providing increased reach and clearance for a variety of workpiece sizes while maintaining rigidity during clamping. Is the clamp suitable for automated cycles? Pneumatic actuation and compact mounting make the clamp well suited to semi-automated or automated processes where rapid, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 230mm Arm, 4.5kN Thrust / 5kN Hold, Horizontal Base, Galvanised – Kukamet
Secure and stable clamping is achieved with the Kukamet 631, combining a 5,000 N holding force with a galvanised, corrosion-resistant finish and a 230 mm reinforced clamping arm; order directly via Metav Werkzeuge or contact our consultants for specification advice. Kukamet 631 Pneumatic Clamp — Galvanised, 5,000 N holding force The 631 pneumatic clamp is a horizontal-foot mounted clamping solution for repetitive production tasks, offering robust holding capacity and extended reach for fixtures and jigs Robust 5,000 N holding force Galvanised construction for corrosion resistance Massively reinforced 230 mm clamping arm Horizontal-foot mounting for stable installation 95° open angle for flexible workpiece access Secure high-force clamping for consistent production The pneumatic clamp delivers a defined holding force of 5,000 N and an actuation force of 4,500 N, which translates into reliable workpiece fixation during machining and assembly. The 230 mm clamping arm provides extended reach while the massive holding arm construction reduces deflection under load, contributing to improved part accuracy and fewer reworks. Emphasis on repeatability and cycle stability makes this clamp suitable for serial production and automated fixtures where consistent force and positioning are required. Durable build for low maintenance and long service life Constructed with a galvanised finish and a reinforced arm, the device resists corrosion and mechanical wear in workshop environments. Pneumatic actuation reduces mechanical complexity compared with manual levers, lowering the frequency of wear-related interventions and simplifying routine checks. The robust materials and design support uninterrupted operation in heavy-use contexts, offering quality continuity across production batches and a dependable lifespan that supports cost-effective maintenance planning. Flexible mounting and ergonomic access to the workpiece Designed for a horizontal foot attachment, the clamp integrates easily into jigs, fixtures and modular tooling plates without occupying excessive vertical space. The 95° open angle allows uncomplicated loading and unloading of components, improving operator ergonomics and throughput. Stable foot mounting combined with the reinforced arm provides confidence when positioning larger or awkwardly shaped parts, enabling a simpler setup and reduced clamping adjustments between cycles. Efficient integration and safe handling in automated cells As a pneumatic clamping element, the unit is suitable for inline automation and can be controlled via standard compressed-air valves and controls. The clearly defined forces and compact footprint facilitate predictable cycle times and faster takt rates, improving overall equipment effectiveness. Safety and process reliability benefit from the repeatable actuation characteristics, which help to minimise unexpected part movement and contribute to consistent quality in series production environments. Contact Metav Werkzeuge to discuss how the Kukamet 631 fits specific fixtures and production requirements and to arrange supply from Emmerich with full technical support. Technical data SKU: 631-5-D-C3 Article name: Pneumatic clamp 631 Manufacturer: Kukamet Material: Galvanised Mounting: Horizontal foot Clamping arm length: 230 mm Max actuation force: 4,500 N Max holding force: 5,000 N Open angle: 95° Special feature: Solid reinforced holding arm ECLASS: 21021004 ETIM: EC011973 Core technical figures Arm length: 230 mm Actuation force: 4,500 N Holding force: 5,000 N Open angle: 95° Design and special features Galvanised surface treatment Horizontal-foot mounting Massive/reinforced clamping arm Pneumatic actuation Suitable for jigs and fixtures FAQ What is the maximum holding force of this clamp? The Kukamet 631 pneumatic clamp provides a maximum holding force of 5,000 N, ensuring secure fixation during machining and assembly operations. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the Kukamet 631 is designed for stable horizontal-foot installation on jigs and tooling plates. Is the clamp suitable for automated production cells? Yes, the pneumatic actuation and defined forces of the 631 make it suitable for integration into automated lines and valve-controlled clamping sequences. What protection against corrosion does the clamp offer? The 631 features a galvanised finish, providing enhanced resistance to corrosion in workshop and production environments. Which SKU should be referenced when ordering or requesting documentation? Please reference SKU 631-5-D-C3 for technical sheets, spare parts and ordering information for the Kukamet 631 pneumatic clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 600 N Push Force, 1000 N Hold, 16 mm Piston, Zinc Coated, Horizontal Base, Massive Arm - Kukamet
Take advantage of the combination of galvanised construction and a massive holding arm with reliable pneumatic actuation for consistent clamping in serial production and assembly fixtures. The device delivers 600 N actuation force with up to 1,000 N holding capacity, enabling stable workholding and reduced cycle variation. Order the Kukamet 611 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 611 Pneumatic Clamp – 600 N actuation, 95° stroke A robust 611 pneumatic clamp for industrial workholding and fixture applications, fitted with a horizontal mounting foot and a massive holding arm. Galvanised body for corrosion resistance Up to 600 N pneumatic actuation force Holding capacity up to 1,000 N Horizontal base with massive holding arm Consistent clamping for repeatable production results The air-operated design of this pneumatic clamp ensures repeatable strokes and consistent clamping pressure, which reduces process variability in production runs. With an actuation output of 600 N and a mechanical holding capacity of 1,000 N, the mechanism separates actuation force from final clamping capacity, improving safety margins in fixtures. The combination of pneumatic drive and a compact piston means quicker cycle times and less manual handling, supporting higher throughput in assembly and machining tasks. Built to withstand workshop demands while simplifying jig design Constructed in galvanised steel and supplied with a horizontal base, the unit resists corrosion and integrates cleanly into welded jigs or plate-mounted fixtures. The 94 mm arm delivers extended reach while maintaining rigidity, and the near-right 95° stroke angle allows secure positioning of odd-shaped components. These characteristics reduce the need for complex secondary supports and simplify fixture layouts, helping to shorten setup times and enhance process reliability. Straightforward integration and low-maintenance operation Designed for system integration with standard compressed-air supplies and basic pneumatic control valves, the clamp features a piston diameter 16 mm that balances compactness with force output. The robust design supports low maintenance intervals and easy inspections, which helps to keep toolroom downtime minimal. For specification matching and installation advice, Metav’s advisors can provide component-level data and mounting recommendations to suit bespoke fixture systems. Contact Metav Werkzeuge today for supply and technical advice on Kukamet pneumatic clamps such as the 611 with 600 N actuation and 1,000 N holding capacity Technical data SKU: 611-1-Q16-D-C2 GTIN: 8682843521564 Model: 611 Type: Pneumatic clamp Brand: Kukamet Core specifications Max actuation force: 600 N Max holding force: 1,000 N Arm length: 94 mm Piston diameter: 16 mm Stroke angle: 95° Features & materials Material: galvanised Mounting: horizontal foot Massive holding arm Category: Spanner eCl@ss: 21021004 ETIM: EC011973 FAQ What clamping force does the Kukamet 611 provide and how does it differ from actuation force? The Kukamet 611 pneumatic clamp delivers an actuation force of 600 N while the mechanical arrangement yields a holding capacity up to 1,000 N, meaning the actuator power and the final clamp retention are optimised independently for safer workholding. Is the 611 suitable for production fixtures exposed to humidity or coolant? Yes, the galvanised finish on the 611 provides enhanced corrosion resistance, making the clamp appropriate for workshop environments where moisture or coolant exposure is present. How is the Kukamet 611 mounted in a jig or fixture? The 611 is supplied with a horizontal foot for plate mounting; the horizontal base enables straightforward bolting to fixture plates or subplates for secure integration. What are the key dimensions to consider when planning a fixture with this clamp? Important measurements include the 94 mm arm reach, piston diameter 16 mm, and the 95° stroke angle; these determine clearances, reach and orientation within the jig design. Can the clamp be integrated into existing pneumatic control systems? The clamp is designed for standard compressed-air integration and can be controlled via conventional valves and fittings; Metav Werkzeuge can advise on compatible fittings and valve arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 600 N Push, 1000 N Hold, 16 mm Piston, Zinc Coated Heavy‑Duty Arm - Kukamet
Take advantage of a robust, galvanised pneumatic clamp that combines a massive holding arm with precise pneumatic actuation for reliable fixture retention and fast cycle times; order the clamp via Metav Werkzeuge or contact their advisors for technical guidance and supply from Emmerich. 611 Pneumatic Clamp by Kukamet — 600 N pneumatic force, 144 mm arm A 611 pneumatic clamp designed for secure fixturing in machining and assembly, mounted on a horizontal foot for straightforward integration into jigs and fixtures Massive holding arm, robust construction 144 mm reach for deep fixtures 95° swivel angle for flexible clamping Galvanised finish resists corrosion Consistent force and fast, repeatable cycles The unit is a pneumatic clamp engineered to deliver reliable actuation with a maximum pneumatic force of 600 N. The actuator uses a 16 mm piston, which translates air pressure into controlled linear motion and predictable clamping forces; this reduces variability between cycles and supports short cycle times in production environments. For operators and engineers, the technical benefit is clear: reduced set-up time and fewer adjustments during batch runs. The device’s design supports repeatable positioning, enabling consistent part quality across multiple operations. Rigid construction for secure fixturing and longevity A massive holding arm and galvanised body form the core of a clamp intended for heavy-duty use. The galvanised finish improves corrosion resistance in mixed workshop environments and contributes to long service life with minimal maintenance. The mechanism provides a maximum holding capacity of 1000 N, offering vibration-resistant retention for machining tasks where stability is essential. The combination of sturdy geometry and protective coating means fewer replacements and a lower total cost of ownership for the fixture system. Flexible mounting and straightforward integration into systems Installation is simplified by the horizontal foot mounting, which supports a compact footprint and easy locating in existing clamping plates or tooling blocks. With a reach of 144 mm and a 95° angle, the clamp adapts to varied part geometries and tight layouts without extensive fixture redesign. Identification for procurement and documentation is available as SKU 611-1-Q16-D-C3 and GTIN 8682843521571, enabling rapid replacement and inventory control. The design promotes compatibility with automated systems and manual jigs alike, improving workflow continuity in workshops and production lines. Choose the Kukamet 611 pneumatic clamp for dependable, repeatable clamping and contact Metav Werkzeuge in Emmerich for ordering or technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 611-1-Q16-D-C3 GTIN: 8682843521571 eClass: 21021004 ETIM: EC011973 Manufacturer: Kukamet Numbers / Core technical data Arm length: 144 mm Piston diameter: 16 mm Clamping force (max): 600 N Holding force (max): 1000 N Angle: 95° Special features Mounting: horizontal foot Material: galvanised Massive holding arm Category: pneumatic clamp Files: 611-612-631-651-652-katalogseite.pdf Image: 611-D-main.jpg FAQ What clamping force does the 611 pneumatic clamp deliver? The Kukamet 611 pneumatic clamp delivers up to 600 N of pneumatic clamping force with a maximum holding capacity of 1000 N; piston diameter 16 mm ensures stable actuation. How is the clamp mounted and what reach does it provide? Mounting is via a horizontal foot; the clamp offers a 144 mm reach and a 95° swivel angle for flexible positioning in fixtures. Is the clamp suitable for harsh workshop environments? Yes, the galvanised finish provides corrosion resistance and the massive holding arm improves durability for heavy-duty applications. Can the clamp be used in automated production? The pneumatic actuation and compact horizontal-foot mounting make the clamp suitable for integration into automated handling and assembly systems. Which parts of industry is this clamp intended for? The clamp is intended for machining, assembly, jigs and fixtures where stable, repeatable clamping is required; it is supplied as SKU 611-1-Q16-D-C3 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 62mm Arm, 1,200 N Push Force, 1,400 N Hold Force, Zinc Plated, Horizontal Foot - Kukamet
Take advantage of a robust combination of precise clamping force and durable construction: the galvanised body and massive 62 mm holding arm ensure consistent positioning and long service life, while the 1,200 N pneumatic actuation and 1,400 N holding capacity deliver reliable process stability. Order the clamp directly via Metav Werkzeuge or contact their consultants for technical advice. Pneumatic clamp 612 — horizontal-foot lever clamp with 1,200 N actuation (Kukamet) Pneumatic clamp 612 offers fast, repeatable lever clamping for fixture and jig applications in workshops and light production environments Pneumatic clamp with 1200 N actuation force Massive 62 mm holding arm Galvanised construction for corrosion resistance Horizontal foot for stable mounting Consistent clamping performance that speeds production The pneumatic actuation delivers a defined 1,200 N drive force combined with a 1,400 N maximum holding capacity, providing a clear separation between actuation and retention. This difference means the device closes quickly under pneumatic pressure and maintains workpiece position under load, reducing rework and cycle-time losses. The 95° lever geometry gives a compact movement path for short stroke installations. These technical values make the clamp particularly suitable where repeatability and throughput are primary concerns, providing measurable process reliability on assembly benches and inspection fixtures. Built for resilience and low maintenance Constructed from galvanised steel and equipped with a massive 62 mm holding arm, the unit resists corrosion and mechanical wear typical in workshop environments. The horizontal foot mounting ensures a low-profile attachment to plates and fixtures while spreading load for secure installation. The robust arm geometry improves contact stability and reduces deflection under side loads, which translates into fewer alignment checks and longer intervals between maintenance interventions. The durable finish supports long-term use, contributing to cost-effective operation over the lifetime of the tool. Simple integration and clear technical fit The clamp is supplied as a lever-type pneumatic unit with a horizontal mounting arrangement and a compact arm length of 62 mm, making it straightforward to incorporate into existing jigs and modular tooling plates. Actuation and holding forces are stated in newtons for direct engineering comparison; actuation force refers to the pneumatic drive available to move the lever, while holding force describes the maximum static retention once clamped. The model’s concise footprint and lever angle of 95° permit close-packed installations and predictable clearance planning. For specification matching and inventory queries, refer to the model SKU and consult Metav Werkzeuge for compatibility with fixture standards. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance, stock information and tailored supply solutions for the Kukamet Pneumatic clamp 612 Technical Data SKU: 612-2-D-C1 Model: 612 Manufacturer: Kukamet Arm: 62 mm Actuation force: 1,200 N Holding force: 1,400 N Angle: 95° Material: Galvanised Mounting: Horizontal foot Type: Pneumatic clamp Feature: Massive holding arm FAQ What clamping and holding forces does the unit provide? The pneumatic unit offers an actuation force of 1,200 N and a maximum holding capacity of 1,400 N, providing fast closure and secure retention for typical fixture tasks with the Pneumatic clamp 612. How is the clamp mounted to a fixture? The clamp uses a horizontal foot mounting system designed for secure attachment to plates and jigs; this arrangement is part of the 612 design for compact, stable installation. Is the clamp suitable for corrosive workshop environments? The body and arm are galvanised, offering enhanced resistance to corrosion and making the clamp suitable for standard workshop conditions where occasional exposure to humidity and shop contaminants occurs. What is the arm length and how does that affect installation? The holding arm measures 62 mm, providing a compact reach that allows close-packed placement of multiple clamps and predictable clearance when planning tooling layouts. At what angle does the lever operate? The lever operates at 95°, giving a short, controlled motion suitable for tight assemblies and quick actuation cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 67mm Arm, 2,000N Push / 2,500N Hold, Zinc Coated, Heavy-Duty Horizontal Base - Kukamet
Take advantage of the combination of robust clamping performance, a massive galvanised holding arm and simple horizontal-foot mounting for reliable, repeatable workholding. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. 612 Pneumatic Clamp — massive holding arm, 2,500 N holding force (Kukamet) The 612 is a horizontal-foot pneumatic clamp engineered for secure workpiece retention in industrial fixtures and jigs, combining compact reach with durable construction for continuous production use. Massive holding arm for high stability Up to 2,500 N holding force 67 mm arm reach for compact fixtures Consistent, measurable clamping that reduces rework The galvanised design and massive holding arm deliver a stable clamping point that reduces vibration and part movement during machining. With a rated holding force of 2,500 N, this clamp provides a clear, quantifiable improvement in fixture stability, which in turn lowers scrap rates and saves time on set-up checks. The robust build translates directly into fewer interruptions on the production line and a more predictable output. Simple integration into jigs and fixtures for faster set-up Mounting via the horizontal foot simplifies placement on plates and frames; the mount allows the clamp to be positioned flush to datum surfaces for repeatable alignment. The 67 mm arm reach is optimised for compact fixtures where space is limited but access and clearance are still required. The galvanised finish improves surface durability and resists corrosion in typical workshop environments, extending service life and reducing maintenance interventions. Pneumatic actuation tuned for industrial throughput Pneumatic actuation delivers a dependable pneumatic actuation force of 2,000 N, enabling rapid, repeatable clamp cycles suited to automated or semi-automated processes. The 95° operation angle ensures a secure locking position, while the compact format keeps the overall footprint small in multi-clamp setups. Supplied as a rugged, workshop-ready unit (SKU 612-3-D-C1) from Kukamet, the clamp is intended for demanding production use where repeatability and robustness are priorities. For robust, compact clamping choose the Kukamet 612—contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Product details Article number: 612-3-D-C1 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Core technical data Arm reach: 67 mm Pneumatic force: 2,000 N Holding force: 2,500 N Operating angle: 95° Materials & features Material: Galvanised Mounting: Horizontal foot Massiver Haltearm: yes Product type: Pneumatic clamp FAQ What maximum holding force does the clamp offer? The clamp provides a holding force of 2,500 N; this holding performance is suitable for a wide range of fixture applications with high repeatability. What is the pneumatic actuation capability? Pneumatic actuation supplies up to 2,000 N of force for rapid and repeatable clamping cycles on the Kukamet pneumatic clamp (SKU 612-3-D-C1). How is the clamp mounted in a fixture? The unit is designed for mounting with a horizontal foot, allowing flush installation on fixture plates and easy alignment with datum surfaces. Is the finish suitable for workshop environments? The galvanised finish delivers basic corrosion resistance suitable for typical workshop conditions and contributes to long service life. What reach does the clamp arm provide and where is it best used? The arm reach of 67 mm makes the clamp well suited to compact fixtures and jigs where space is limited but reliable access and clearance are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 750 N Push Force, 1,000 N Hold Force, Horizontal Foot, Massive Arm, Zinc-Plated - Kukamet
Take advantage of the combination of solid clamping performance, compact arm geometry and corrosion-resistant finish for reliable fixture work in automated or manual production. Order the 631 pneumatic clamping lever directly via Metav Werkzeuge or ask the consultants for tailored application advice. 631 Pneumatic clamping lever with horizontal foot, 750 N clamping force (Kukamet) A 631 pneumatic clamping lever designed for secure, repeatable fixture holding in production and assembly applications. Massive holding arm for stable clamping 44 mm arm for compact fixture layouts Horizontal-foot mounting for flush installation Galvanised finish for corrosion resistance Faster, measurable clamping for consistent production The pneumatic design delivers a defined 750 N clamping action and a 1,000 N holding capacity, providing measurable force values that support process control. Using a pneumatically driven actuator ensures short cycle times and consistent force application, which reduces variability between cycles and improves part quality. The lever-style action converts compressed-air energy into a robust locking motion, enabling straightforward integration into semi-automatic and fully automated workstations. Emphasis on repeatability and controlled clamping force makes this solution particularly suitable where process stability and throughput are priorities. Compact mounting that saves space without sacrificing strength With a 44 mm arm and a horizontal foot mounting, this clamping lever is built for compact fixture designs and low-profile installations. The massive holding arm provides a short lever moment while maintaining rigidity, which benefits machining and assembly operations with tight spatial constraints. A clamp angle of 95° offers a defined end position for reliable part retention and easy positioning during workpiece loading. The galvanised surface protects components in harsh workshop environments, extending service intervals and lowering the lifecycle cost through reduced corrosion-related wear. Designed for robust, low-maintenance operation on the shop floor Constructed for industrial use, the unit combines simple pneumatic actuation with minimal mechanical complexity to reduce maintenance demands. The combination of controlled clamping force and sturdy construction lessens the risk of slippage and part deformation, which in turn lowers rework rates and machine downtime. The clamp is suitable for repeated-cycle applications in fabrication, welding jigs and assembly fixtures where a balance of strength and speed is required. Technical integration is simplified by standardised mounting and clear specification of clamping and holding forces, supporting predictable machine setup and easier qualification in production processes. Choose the Kukamet 631 for dependable, compact pneumatic clamping — contact Metav Werkzeuge for application support and local supply from Emmerich. Technical data Article number: 631-1-D-C1 Brand: Kukamet Material: Galvanised Mounting: Horizontal foot Core data Arm length: 44 mm Maximum clamping force: 750 N Maximum holding force: 1,000 N Clamp angle: 95° ECLASS: 21021004 ETIM: EC011973 Special features Massive holding arm Galvanised finish Pneumatic actuation Category: Clamps FAQ What clamping force does the 631 deliver? The 631 pneumatic clamping lever provides a defined clamping force of 750 N and a maximum holding capacity of 1,000 N for reliable fixture retention. Which mounting orientation is required? The device is designed for horizontal-foot mounting to enable flush installation in fixtures and jigs. What material and surface protection does it have? The clamping lever is made with a galvanised finish to improve corrosion resistance for workshop environments. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and consistent force output make the 631 suitable for semi-automatic and fully automated production systems. How compact is the lever for tight fixture layouts? A 44 mm arm length allows compact fixture design while maintaining the necessary rigidity for secure clamping. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 1,200 N Push, 1,400 N Hold, Zinc Plated - Kukamet
Take advantage of a corrosion-resistant, galvanised design combined with dependable pneumatic actuation and measurable clamping performance for consistent fixture results; order via Metav Werkzeuge or request technical guidance from our consultants for fast supply from Emmerich. Kukamet Pneumatic Toggle Clamp 612 — galvanised, 1,200 N clamping force A 612 pneumatic toggle clamp engineered for secure, repeatable workholding in production jigs and workshop fixtures, providing rapid cycle control and stable part retention. Galvanised surface for corrosion resistance 1,200 N pneumatic clamping force 1,400 N maximum holding force Horizontal foot mounting, 95° lever angle Consistent, measurable force for repeatable production The pneumatic actuation delivers a controlled clamping force of 1,200 N, backed by a holding force rated at 1,400 N, which translates into reliable part fixation across repetitive cycles. Specifying a clamp with defined force values supports process planners and quality engineers by reducing variability at the workpiece interface; measured values make it straightforward to compare the clamp against alternative fixtures and to calculate safety margins for fragile or machined components. Corrosion resistance and compact mounting for tight installations A galvanised finish provides basic protection against corrosion, extending service life where ambient moisture or light contamination is present. The clamp’s horizontal foot mounting and 95° lever angle are optimised for integration into confined jigs and conveyor-mounted fixtures, allowing a compact footprint and straightforward alignment. This combination reduces rework time during assembly of fixtures and simplifies retrofit into existing tooling layouts. Lightweight construction and low maintenance for workshop use Weighing 0.535 kg, the unit is light enough to be handled easily during fixture assembly yet robust for industrial use. As a pneumatic toggle clamp, it converts compressed-air control into repeatable clamping strokes with a simple pneumatic valve, reducing mechanical wear compared with manually actuated levers. The galvanised steel construction requires minimal upkeep, supporting uptime-focused operations where straightforward replacement and predictable lifecycle planning are prioritised. Secure production clamping with the Kukamet 612 — contact Metav Werkzeuge for specification support and fast delivery from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 612-2 GTIN: 8680731501704 Manufacturer: Kukamet Facts Clamping force: 1,200 N Holding force: 1,400 N Weight: 0.535 kg Lever angle: 95° eClass: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot Design: pneumatic toggle clamp Catalog page: 612-katalogseite.pdf FAQ What is the rated clamping force of this clamp? The Kukamet 612 pneumatic toggle clamp has a rated clamping force of 1,200 N and a maximum holding force of 1,400 N. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, designed for secure bolting into jigs and fixture plates to ensure stable positioning. Is the surface treated for corrosion protection? Yes, the unit is galvanised, providing basic corrosion resistance suitable for workshop and light industrial environments. What is the weight of the clamp for handling and fixture calculation? The clamp weighs 0.535 kg, facilitating easy handling during assembly and minimal impact on moving fixture sections. Does this clamp require special maintenance or lubrication? Routine inspection and standard pneumatic maintenance are sufficient; the galvanised finish and pneumatic actuation minimise mechanical servicing needs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 2,000 N Push, 2,500 N Hold, Zinc-Plated - Kukamet
Benefit from a compact, corrosion-resistant pneumatic lever clamp that delivers up to 2,000 N of clamping force and a 2,500 N holding capacity; the horizontal foot ensures secure, repeatable mounting and short setup times. Order the 612 directly via Metav Werkzeuge or consult our technical team for specification support. 612 Pneumatic Lever Clamp — 2,000 N Force, Galvanised (Kukamet) A 612 pneumatic lever clamp for horizontal-foot mounting, designed to provide quick, reliable workholding in production and workshop fixtures Galvanised steel for corrosion resistance Horizontal foot mounting for stable set-up 2,000 N pneumatic force for rapid clamping 2,500 N holding capacity for secure workpieces Faster clamping cycles to increase throughput The pneumatic actuation of this lever clamp converts compressed-air input into a rapid, controlled clamping motion, enabling shorter cycle times and more consistent fixturing. With a rated 2,000 N pneumatic force, the mechanism applies sufficient power to engage workpieces quickly while the 2,500 N holding capacity maintains position during machining or assembly. This combination reduces manual rework and helps standardise production processes, supporting measurable efficiency gains on the shop floor. Robust construction that withstands workshop use Constructed from galvanised steel, the clamp offers enhanced corrosion resistance for long-term reliability in demanding environments. The unit weight of 0.86 kg keeps the component manageable for fixture assemblies while contributing minimal additional mass to the tooling. The 95° clamping angle provides a secure engagement geometry that is particularly useful for repetitive operations, where consistent clamping force and durability are essential for part quality and operator confidence. Compact mounting for simple integration into fixtures Designed with a horizontal foot mounting arrangement, the clamp integrates easily into modular tooling plates and jigs without requiring complex adapters. The flat mounting base facilitates precise alignment and stable attachment, so the component can be positioned close to the workpiece to save space and improve accessibility. The lever-style actuation delivers an intuitive motion, allowing rapid locking and unlocking in automated or manual workflows. Industrial suitability and application range This lever clamp is suited to general workshop and light industrial fixturing where pneumatic control and reliable holding are required. The galvanised finish and solid construction make it appropriate for repeated use in production cells, assembly benches or CNC setups. As a standardised clamping element, it supports lean tooling strategies by reducing setup variability and lowering the risk of workpiece displacement during critical operations. For dependable clamping performance with Kukamet quality, contact Metav Werkzeuge for ordering and detailed technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 612-3 GTIN: 8680731505245 ECLASS: 21021004 ETIM: EC011973 Facts Max. pneumatic force: 2,000 N Max. holding force: 2,500 N Weight: 0.86 kg Clamping angle: 95° Special features Material: galvanised steel Mounting: horizontal foot Arm: not applicable Special characteristic: none FAQ What maximum clamping and holding force does the clamp provide? The clamp delivers a pneumatic force of 2,000 N and a holding capacity of 2,500 N for secure workholding with consistent performance. Is the clamp suitable for use in corrosive workshop environments? The unit is made from galvanised steel, which offers improved corrosion resistance suitable for general workshop conditions. How is the clamp mounted to a fixture plate? The clamp uses a horizontal foot mounting that enables stable, space-saving attachment to tooling plates and jigs. What is the weight of the clamp and how does that affect fixture design? The clamp weighs 0.86 kg, allowing easy handling and minimal added mass to modular fixtures without compromising stability. Can the clamp be used for automated production cycles? Yes, the pneumatic actuation and lever-style motion are designed for integration into automated or semi-automated fixturing solutions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 3,000 N Thrust, Zinc-Plated - Kukamet
Take advantage of the combination of consistent pneumatic clamping, a 3,300 N maximum holding force and a compact, galvanised design for dependable workholding in small and medium production runs. Order the unit directly via Metav Werkzeuge or consult the team for application advice. 611 Pneumatic Clamp (Horizontal-foot) — galvanised, 3.3 kN holding force The 611 is a pneumatic clamp designed for secure workholding in metalworking and general workshop applications, providing rapid actuation and stable clamping with a horizontal-foot mounting. Galvanised surface for improved corrosion resistance Horizontal-foot mounting for simple installation 3,300 N maximum holding force for secure fixation Compact design at 1.69 kg for space-efficient setups Consistent pneumatic performance that stabilises processes The 611 delivers a predictable clamping cycle through its pneumatic actuation, converting compressed air into repeatable clamping motion. With an actuating force of 3,000 N and a holding force of 3,300 N, the device reduces variability at the clamping stage and supports a stable production flow. This controlled force profile shortens setup times and minimises rework by keeping components immobilised during machining or inspection. The mechanism’s defined 95° operating angle ensures a reliable contact geometry that aids repeatability in serial tasks. Compact mounting and corrosion protection for long service life Fitted with a horizontal foot, the clamp can be mounted on flat machine beds or fixtures without complex adapters, enabling fast retrofitting. The galvanised finish provides a protective layer against mild corrosive environments, extending service intervals where humidity or splashing oils are present. At only 1.69 kg, the unit is lightweight yet robust, allowing integration into fixtures where space and mass constraints matter. The combination of compactness and durable surface treatment supports both mobile jig systems and fixed production cells. Low-maintenance design geared to workshop reliability Engineered for practical workshop use, the clamp combines straightforward mechanical design with easily accessible mounting interfaces. The simple construction minimises routine maintenance and shortens downtime between shifts, while the galvanised components reduce the need for frequent replacements due to surface wear. Suitable for a wide range of general clamping tasks, the device contributes to leaner tooling inventories and predictable machine availability, supporting efficient workflows in both maintenance shops and production environments. Contact Metav Werkzeuge in Emmerich for availability and tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Product: Pneumatic clamp 611 SKU: 611-4 GTIN: 8680731502916 Manufacturer: Kukamet Facts Weight: 1.69 kg Actuating force: 3,000 N Holding force: 3,300 N Operating angle: 95° eClass: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Category: Spanner FAQ What clamping and holding forces are provided by this clamp? The 611 pneumatic clamp offers an actuating force of 3,000 N and a maximum holding force of 3,300 N, delivering secure fixation for typical workshop and light industrial tasks. How is the clamp mounted on a fixture or machine bed? Mounting is by the horizontal foot; the 611 is designed for straightforward bolting to flat surfaces and fixture plates to simplify integration into existing setups. Is the surface finish suitable for humid workshop environments? Yes, the galvanised coating on the 611 improves resistance to corrosion and surface oxidation, reducing maintenance in environments with occasional moisture or splashing oils. What advantages does pneumatic actuation bring to production? Pneumatic actuation in the 611 provides rapid, repeatable clamping cycles, supporting shorter setup times and consistent workholding that reduces rework and increases throughput. How much maintenance does the clamp require? The clamp’s simple mechanical design and protective galvanised finish minimise routine maintenance; regular checks of mounting fasteners and pneumatic connections are recommended to maintain consistent performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 600 N Stroke, Zinc-Plated 16 mm Piston - Kukamet
The robust combination of a compact 16 mm piston, 600 N actuation force and a galvanised finish ensures reliable clamping in automated fixtures; take advantage of consistent performance and easy integration for uninterrupted production. Order the component directly via Metav Werkzeuge or consult the team for application advice. 611 Pneumatic clamp by Kukamet — 95° pivot, 16 mm piston The 611 pneumatic clamp is a horizontal-foot clamping unit for industrial fixturing, engineered for rapid automated actuation and secure holding in production and assembly contexts. 600 N actuation force for swift clamping 1,000 N holding force for secure fixation Horizontal foot for stable base mounting 16 mm piston diameter for compact power Consistent clamping power that keeps production moving The compact actuator delivers a clear performance profile: 600 N of actuation force and a 1,000 N holding capacity provide a high force-to-size ratio that benefits short-cycle automation and repetitive jigs. The internal piston, specified at 16 mm, converts compressed-air input into controlled linear force; this mechanical advantage reduces fixture complexity and shortens cycle times. Presented as a precision clamping element, the unit supports predictable repeatability, helping to reduce rework and minimise process interruptions. Space-saving design eases integration and service A low-profile housing with a horizontal foot mount simplifies mechanical integration in existing tooling plates and multi-station fixtures. At 0.275 kg, the lightweight construction reduces inertial loading on moving subassemblies and enables faster indexing of rotary or linear positioning systems. The compact dimensions and standardised mounting allow straightforward replacement of manual clamps with pneumatic operation, improving throughput without major retooling. Routine maintenance is facilitated by accessible mounting points and a design that separates the actuator from the mounting interface. Corrosion resistance and application versatility The galvanised finish protects the component in workshop and moderate industrial environments, extending service life where coolant splash or humidity are present. Specified as a pneumatic lever-style clamp, the device is suitable for a range of clamping tasks on workpiece carriers, assembly jigs and CNC fixtures. Its design supports integration with common pneumatic control systems; the clear force ratings and piston size enable accurate calculation of required air supply and cycle timing. This makes the clamp appropriate for metalworking and general workshop use where a compact, repeatable clamp is required. Contact Metav Werkzeuge for tailored application support or to place an order for the Kukamet 611 pneumatic clamp; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 611-1-Q16 SKU: 611-1-Q16 GTIN: 8680731502879 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Actuation force: 600 N Holding force: 1,000 N Piston diameter: 16 mm Angle: 95° Weight: 0.275 kg Special features Mounting: horizontal foot Finish: galvanised Type: pneumatic lever clamp Category: Spanner FAQ What is the maximum clamping force of this pneumatic clamp? The Kukamet 611 pneumatic clamp provides a holding force of 1,000 N and an actuation force of 600 N as specified for fixture design. Which mounting method is used for installation? The unit features a horizontal foot mounting style suitable for direct attachment to fixture plates and sub‑bases. What is the piston diameter and why does it matter? The piston diameter is 16 mm; this dimension determines the actuator’s stroke force and is used to calculate required pneumatic pressure for the intended cycle time. Is the finish suitable for workshop environments with occasional coolant exposure? Yes, the galvanised finish enhances corrosion resistance, making the clamp suitable for workshop and light industrial conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 750 N Thrust, 1000 N Hold Force, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that delivers 750 N of pneumatic clamping force and up to 1,000 N holding capacity for reliable fixtures. The zinc‑plated design and a 20 mm piston diameter ensure consistent actuation and long service life — order the unit directly via Metav Werkzeuge or contact our consultants for application advice. 611 Pneumatic Clamp with 750 N Clamping Force (Kukamet) The 611 is a compact pneumatic clamp for secure workholding in production, automation and fixture assemblies. Zinc-plated compact construction 750 N pneumatic clamping force 1,000 N maximum holding force Horizontal base with 95° operating angle Consistent clamping performance for repeatable production The 611 pneumatic clamp combines a controlled pneumatic actuation with a 20 mm piston to produce a steady 750 N clamping force, providing reproducible results cycle after cycle. The listed 1,000 N holding force indicates the device’s ability to withstand shear and pull forces once engaged; this distinction between clamping and holding values is important when designing jigs or fixtures. The lightweight construction of 0.36 kg minimises added mass on moving fixtures while still delivering industrially relevant force levels, supporting efficient cycle times and stable part positioning. Compact mounting and corrosion-resistant construction for easy integration Engineered with a horizontal base, the clamp fits low‑profile layouts and is suitable for inline and side‑mounted fixtures where space is limited. The 95° operating angle defines the toggle travel and contact geometry, allowing predictable part engagement within tight envelopes. The zinc‑plated finish provides basic corrosion resistance for workshop and light industrial environments, reducing maintenance frequency and ensuring visible wear remains limited. Its compact footprint and nominal weight simplify retrofits and automation integration without extensive rework to existing tooling. Practical use cases and straightforward upkeep This actuated clamp suits repetitive clamping tasks in assembly, fixture and test stations where pneumatic supply is available. The robust mechanical design supports high cycle counts; regular checks of the pneumatic supply and mounting fasteners are the primary maintenance actions. When specifying applications, consider the separate values for actuation force and holding capacity to match clamping pads and workpiece materials. The clamp is identified as SKU 611-1-Q20 and can be referenced in procurement and spare‑parts lists for streamlined replacement and traceability. For purchase or technical consultation on the Kukamet 611 pneumatic clamp, contact Metav Werkzeuge — reliable supply and application support from Emmerich is available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 611-1-Q20 GTIN: 8680731502886 Manufacturer: Kukamet Weight: 0.36 kg Material: Zinc-plated Article category: Clamp (Spanner) Core figures Maximum clamping force: 750 N Maximum holding force: 1,000 N Piston diameter: 20 mm Operating angle: 95° eClass: 21021004 ETIM: EC011973 Features & materials Mounting: horizontal base Construction: compact pneumatic clamp Use: workholding, fixtures, automation Typical environments: production and workshop FAQ What clamping and holding forces does this clamp provide? The 611 pneumatic clamp delivers 750 N pneumatic clamping force and a 1,000 N maximum holding force; these values guide fixture design and safety margins. How is the clamp mounted in an assembly? Mounting is via the horizontal base; the 95° operating angle and compact footprint of the clamp allow straightforward integration into jigs and automation plates. Is the surface finish suitable for workshop environments? Yes, the zinc‑plated surface offers basic corrosion protection for general workshop and light industrial conditions, helping to extend service intervals. Which identifier should be used for ordering spare parts? Reference SKU 611-1-Q20 or GTIN 8680731502886 when ordering replacement units or checking stock. What maintenance is required for long service life? Periodic inspection of pneumatic connections, mounting fasteners and visible wear on contact surfaces is recommended to maintain reliable operation of the Kukamet clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base Zinc Plated, 4 500 N Push / 5 000 N Hold - Kukamet
Take advantage of a pneumatic clamping solution that combines fast pneumatic actuation, a maximum holding force of 5,000 N and a galvanised finish for dependable, low-maintenance performance on repetitive production tasks. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. 631 Pneumatic Clamp — Pneumatic lever clamp, galvanised, 5,000 N holding force (Kukamet) The 631 is a pneumatic clamp intended for repetitive clamping in workshop and production jigs, featuring a horizontal base and a 95° opening angle for easy access Pneumatic actuation for fast cycles Up to 5,000 N holding force Galvanised corrosion protection Horizontal base, 95° opening angle Consistent clamping to boost throughput The pneumatic actuation system delivers repeatable clamping with a maximum actuation force of 4,500 N and a maximum holding force of 5,000 N, which together ensure consistent retention once a workpiece is located. This consistency reduces rework and scrap by maintaining clamp pressure within narrow tolerances during each cycle. The pneumatic drive is designed for short cycle times and reliable repeatability, making the unit suitable for fixture work, assembly stations and repetitive CNC loading where predictable clamp force and fast operation translate directly into higher output. Built for long service in demanding environments Constructed with a galvanised finish and a robust mechanical layout, the clamp resists common workshop contaminants and offers corrosion protection that extends service intervals. The horizontal base mounting simplifies integration on flat fixture plates or jigs; the 95° opening angle provides improved access for loading and unloading, while the compact mass of 3.61 kg keeps additional load on the fixture low. The lever-style mechanism provides mechanical advantage and clear visual feedback when engaged, supporting both manual and automated workflows with modest maintenance requirements. Easy integration and practical handling for the production floor The clamp is designed to be connected to standard compressed-air systems and to work reliably as part of semi-automatic or fully automatic lines. The lever-type arrangement enables straightforward positioning of the clamp arm, and the galvanised surface reduces the need for frequent rework or replacement. For specific installation questions, dimensional checks or cycle-pressure recommendations, technical assistance is available; this helps to ensure that the clamp is matched to the correct cylinder pressure and control strategy for the intended application. For detailed technical data or application advice, contact info@metav-werkzeuge.com or call +49 2822 7131930. Choose the Kukamet 631 pneumatic clamp for reliable, repeatable production clamping and contact Metav Werkzeuge in Emmerich for tailored application guidance and prompt supply from our European stock Technical data SKU: 631-5 GTIN: 8680731504996 Manufacturer: Kukamet Material: galvanised Core technical data Weight: 3.61 kg Maximum actuation force: 4,500 N Maximum holding force: 5,000 N Opening angle: 95° ECLASS: 21021004 ETIM: EC011973 Features Mounting: horizontal base Type: lever clamp (pneumatic) Finish: galvanised Category: Spanner Special feature: none FAQ What is the difference between actuation force and holding force? Actuation force refers to the maximum force applied during the pneumatic closing action (4,500 N for this unit), while holding force describes the clamp’s static retention capacity once closed (5,000 N for the 631 pneumatic clamp by Kukamet). Can the clamp be mounted on a flat fixture plate? Yes, the 631 features a horizontal base designed for secure mounting on flat fixture plates and jigs, facilitating integration into existing tooling. Is the 631 suitable for automated production lines? Yes, the pneumatic actuation and lever arrangement make the 631 suitable for semi-automatic and fully automated systems where fast, repeatable clamping is required. What maintenance is recommended? Routine checks of pneumatic connections, a visual inspection of the galvanised surface and periodic verification of clamp engagement are recommended to maintain reliable operation of the Kukamet 631. Are dimensions and installation data available? Dimensional drawings and installation recommendations are available on request to support correct mounting and system integration for the 631 (SKU 631-5). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Foot 750 N Push, Zinc-Plated 0.47 kg - Kukamet
Take advantage of a robust, zinc-plated pneumatic solution that combines consistent clamping power and a compact, lightweight design for reliable fixture performance; order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Clamp 631 by Kukamet — horizontal-foot clamp with 750 N pressing force The Pneumatic Clamp 631 is a horizontal-foot pneumatic clamping device designed for workshop fixtures and light production assembly, offering rapid actuation and repeatable holding capacity. Kukamet pneumatic clamp »631« with horizontal foot Zinc-plated body for corrosion resistance Max pressing force 750 N, holding 1,000 N Lightweight design, net weight 0.47 kg Fast, repeatable clamping for efficient workflows This pneumatic clamping unit delivers a clearly defined clamping performance that supports process stability on assembly lines and jig applications. With a pressing force of 750 N and a holding capacity of 1,000 N, the device enables secure workpiece retention without overdesigning the fixture. The pneumatic actuation ensures rapid cycle times and consistent force delivery, which reduces rework and contributes to higher throughput. Technical terms explained: pressing force refers to the active clamping push, while holding capacity indicates the maximum static retention the clamp can sustain once actuated. Durable construction and compact footprint for easy integration Constructed with a zinc-plated body, the clamp resists corrosion in workshop environments and retains a finished appearance under frequent handling. The horizontal foot mount provides a low-profile attachment point for bench fixtures or modular tooling plates, while the compact mass—0.47 kg—keeps added inertia to a minimum for rotating or mobile fixtures. The unit’s 95° swivel angle facilitates clearance in tight arrangements and allows straightforward alignment of the clamping arm within a jig layout. These attributes simplify mechanical integration and reduce design iterations during installation. Practical handling and application advantages for daily use Designed for straightforward installation and low maintenance, the clamp offers practical benefits for toolrooms and production environments alike. The lightweight and corrosion-resistant characteristics help to lower long-term upkeep, while pneumatic operation eliminates manual fatigue in repetitive tasks. The compact form factor makes the device suitable for small-batch production and dedicated fixtures where space is limited. For users seeking stability and repeatability in clamping without complex control systems, this pneumatic solution provides a pragmatic balance between performance and simplicity. Select the Kukamet pneumatic clamp 631 for dependable clamping performance in jigs and fixtures — contact Metav Werkzeuge for specification support and procurement via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 631-1 GTIN: 8680731502992 Manufacturer: Kukamet Facts Net weight: 0.47 kg Max pressing force: 750 N Max holding force: 1,000 N Swivel/working angle: 95° Special features Material: zinc-plated Mounting: horizontal foot No additional special features indicated FAQ What is the maximum clamping force of this clamp? The Kukamet pneumatic clamp 631 provides a pressing force of 750 N and a holding capacity of 1,000 N for secure workpiece retention. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the unit is designed for low-profile attachment to bench plates and modular jigs. Is the clamp suitable for corrosive workshop environments? The zinc-plated finish on the clamp offers corrosion resistance suitable for typical workshop and production settings. What is the weight and how does that affect integration? The clamp weighs 0.47 kg, which keeps added inertia low and simplifies integration in compact or movable fixture designs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
970 N Hold Force Push Rod Clamp With Horizontal Foot, Stainless Steel - Kukamet
Compact stainless steel design with a horizontal foot and an M5×35 spindle provides dependable clamping and holding forces of 800 N / 970 N for light industrial fixtures; combine robustness, low weight and simple mounting for smooth fixture workflows. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 511 (S511-1) by Kukamet — stainless steel, horizontal foot, M5×35 spindle Push-rod clamp 511 is a compact horizontal-foot clamp designed for light-duty jigs and workholding where reliable, repeatable clamping is required Stainless steel construction Horizontal foot mounting Max clamping 800 N, holding 970 N Compact weight 0.135 kg Predictable holding performance for repeatable processes The clamp delivers defined mechanical values: a clamping force of 800 N and a holding force of 970 N, which ensures consistent fixation in small fixtures and assembly jigs. The difference between clamping and holding force reflects safe static retention versus active closing power; this distinction helps when designing clamping sequences and selecting suitable fasteners. The M5×35 spindle provides a standard thread connection for integration into existing fixture plates, while the stainless construction supports stable performance under regular workshop conditions. Easy integration and space-saving mounting A horizontal foot allows the device to be mounted on flat surfaces and positioned close to the workpiece, reducing overhang and minimising interference with tooling. With a compact weight of 0.135 kg, the unit adds minimal load to movable fixtures and can be installed in multiples without affecting balance. The low mass and standard fastening enable quick retrofitting into jigs and fixtures; installation uses commonly available M5 hardware and needs no special adapters, simplifying layout and reducing setup time. Durable material choice for low-maintenance operation Constructed from stainless steel, the clamp combines mechanical resilience with corrosion resistance, lowering the frequency of replacements in environments with occasional humidity or coolant exposure. Stainless components also support hygienic workspaces and reduce the need for surface treatments. The simple mechanical design minimises wear parts, enabling long service intervals and predictable maintenance planning for production lines and small-batch operations. Application scope and handling advantages Positioned as a light to medium workholding device, the clamp is suitable for repetitive assembly, prototyping fixtures and small-scale machining jigs where compact form and clear force figures are priorities. The mechanism offers quick actuation and secure retention, helping to speed up cycle times in manual or semi-automated processes. Its straightforward construction supports straightforward inspection and replacement of consumable parts, contributing to consistent quality and reduced downtime. Contact Metav Werkzeuge today to discuss how the Kukamet push-rod clamp 511 fits into existing fixtures or to request further technical clarification from Metav's consultants. Technical data SKU: S511-1 GTIN: 8682843520000 eClass: 21041716 ETIM: EC011973 Numbers Max clamping force: 800 N Max holding force: 970 N Weight: 0.135 kg Designs / Special features Material: stainless steel Mounting: horizontal foot Pressure spindle: M5×35 Special feature: none FAQ What maximum forces does the clamp provide? The push-rod clamp 511 offers a clamping force of 800 N and a holding force of 970 N for reliable fixation in light-duty fixtures. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot; the clamp is suitable for direct attachment to flat plates using standard fasteners compatible with the horizontal-foot arrangement. Which spindle thread is used on the device? A pressure spindle with an M5×35 specification is fitted, allowing straightforward connection with M5 threaded components. Is the clamp suitable for environments with moisture or coolant? The stainless steel construction of the 511 clamp supports increased corrosion resistance and reduces maintenance in environments with occasional moisture exposure. What size and weight should be expected when fitting multiple clamps? Each unit weighs 0.135 kg, enabling multiple installations without significant addition of mass to movable fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
97mm Clamp Height Compact Clamp 60mm Reach Closed Mounting Hole - BESSEY
Take advantage of the combination of reliable 97 mm clamping height, a compact 60 mm reach and an aluminium pressure pad for consistent, damage‑free clamping. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. BAS Compact Clamp by BESSEY — 97 mm clamping height, 60 mm reach A BAS Compact Clamp engineered for secure, space‑saving clamping in tight workshop environments, featuring an aluminium pressure pad and a closed mounting hole for fixed installation 97 mm clamping height for higher workpieces 60 mm reach for close‑quarter applications Aluminium pressure pad for even load distribution Closed mounting hole for secure fixed installation Secure clamping where space is limited The combination of a 97 mm clamping height and a 60 mm reach makes this compact clamp ideal for tasks where vertical capacity and short overhang are both required. The larger clamping height allows accommodation of thicker assemblies while the restrained reach keeps the tool manoeuvrable in confined jigs and benches. For production and repair work, this translates into fewer tool changes and faster setup times, improving workflow efficiency without sacrificing clamping force or reliability. Even pressure and surface protection for delicate components Equipped with an aluminium pressure pad, the clamping face distributes force across a broader area to reduce marking and distortion on softer or finished components. The pressure pad’s design enables even load distribution, which is particularly useful for laminates, thin panels and prep work before final fixing. This gentle yet secure contact supports repeatable, high‑quality results and reduces scrap caused by clamp damage, supporting consistent part quality across runs. Robust attachment and simple workshop integration The clamp’s closed mounting hole permits secure, permanent fastening to fixtures, benches or assembly jigs, enabling a fixed clamping station when needed. As a compact clamp, it is compatible with modular workshop setups and can be integrated into fixtures to save space and speed up repetitive operations. Built to the practical needs of craftsmen and small production lines alike, the tool offers dependable performance for day‑to‑day clamping tasks while remaining easy to handle and position. For precise clamping from a trusted brand, contact Metav Werkzeuge to request a technical consultation or to place an order for the BESSEY BAS Compact Clamp (SKU 4123716050NW) — our Emmerich team will assist with specifications and delivery arrangements Technical data Article number: 4123716050NW Type: BAS Product: Compact clamp Manufacturer: BESSEY Packaging unit: 1 Facts Clamping height: 97 mm Reach: 60 mm Special features Aluminium pressure pad Closed mounting hole Compact design FAQ What is the maximum clamping height of this clamp? The clamping height is 97 mm for the BAS Compact Clamp (BESSEY, SKU 4123716050NW), allowing secure holding of relatively tall workpieces. How far does the clamp reach from the fixing point? The clamp provides a 60 mm reach, designed for close‑quarter clamping and use in confined jigs or bench fixtures. Does the clamping face protect finished surfaces? Yes. The aluminium pressure pad on the BAS Compact Clamp delivers even load distribution to minimise marking and protect delicate surfaces during clamping. Can the clamp be fixed permanently to a workbench or jig? The closed mounting hole permits fixed installation, enabling secure attachment of the clamp to benches or custom fixtures for repeatable use. How many items are supplied per package? The item is supplied as a single unit (packaging unit: 1) for direct installation into the workshop. Manufacturer: BESSEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com