Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
97mm Clamp Height Compact Clamp 60mm Reach Open Pressure Shoe, - BESSEY
Take advantage of a compact clamping solution that delivers precise 97 mm clamping height and a 60 mm reach for confined assembly tasks; the open aluminium pressure shoe protects workpieces while the open mounting hole enables flexible installation—order the unit via Metav Werkzeuge or consult our specialists for compatibility and supply. BAS Compact Spanner — 97 mm clamping height, 60 mm reach (BESSEY) The BAS Compact Spanner is a workshop-grade compact spanner designed for secure clamping in tight assemblies, offering a 97 mm clamping height and a 60 mm reach with an open aluminium pressure shoe for surface protection. 97 mm clamping height for deep work 60 mm reach for narrow spaces Open aluminium pressure shoe for gentle clamping Open mounting hole for flexible installation Secure clamping where space is limited The combination of 97 mm clamping height and 60 mm reach delivers reliable hold in confined setups. The increased clamping height permits taller workpieces to be fixed without sacrificing access, while the modest reach ensures the tool fits into restricted jig and fixture arrangements. This results in fewer workpiece movements and shorter set-up times, so processes are more efficient and downtimes are reduced. Precision and repeatability are supported by the compact form factor, which prevents unnecessary lateral play during tightening. Gentle contact for sensitive surfaces Fitted with an open aluminium pressure shoe, the clamping surface spreads load and reduces point pressure, lowering the risk of marring on softer materials. An aluminium pressure shoe functions as a sacrificial interface: it conforms slightly under load and can be replaced if heavily worn. For applications where surface finish matters, this feature preserves component integrity while maintaining secure clamping force. The open design also permits visual inspection of the contact area during operation, helping to ensure consistent positioning. Flexible fastening and installation options An open mounting hole is provided for straightforward fastening to workbenches, fixtures or custom jigs, enabling rapid integration into existing setups. The compact construction minimises interference with surrounding tools and allows several units to be mounted in close proximity for multi-point clamping. Because the spanner is compact, bench layout can be optimised for production flow, and fixture design simplified, which contributes to shorter retooling times and better shop-floor ergonomics. Built for routine industrial and workshop use Manufactured to meet practical daily demands, this compact spanner is suitable for repetitive assembly and clamping tasks in metalworking and general workshop environments. The straightforward mechanical design reduces the need for complex maintenance; components that experience wear are readily accessible and can be serviced without specialised equipment. Reliability in everyday use supports consistent production quality, while the compact footprint helps to maximise valuable bench space and streamline operations. Contact Metav Werkzeuge today to confirm compatibility and lead times for the BAS compact spanner—expert advice and secure supply from Emmerich are available by phone or email Technical data Article number: 4123716020NW Product type: Compact spanner Manufacturer: BESSEY Clamping height: 97 mm Reach: 60 mm Execution: open mounting hole; open aluminium pressure shoe Facts SKU: 4123716020NW Clamping height: 97 mm Reach: 60 mm Special features Open aluminium pressure shoe Open mounting hole for flexible installation Compact design for confined spaces FAQ What is the maximum clamping height of this spanner? The clamping height is 97 mm for the BAS compact spanner (SKU 4123716020NW), allowing secure fixation of taller workpieces within a compact footprint. How far does the spanner reach from the mounting point? The tool provides a 60 mm reach, suitable for use in narrow fixtures and confined assembly situations. What benefit does the aluminium pressure shoe provide? The open aluminium pressure shoe distributes clamping force to reduce surface marking and offers a replaceable contact surface for prolonged component protection. Can the spanner be fastened directly to a bench or jig? Yes, the spanner features an open mounting hole that enables direct fastening to benches, fixtures or custom jigs for straightforward integration. Is this spanner designed for workshop use? The BAS compact spanner is intended for routine workshop and industrial clamping tasks, offering a durable, compact solution for repetitive assembly operations. Manufacturer: BESSEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
97mm Clamping Height Compact Clamp Open Pressure Shoe, 60mm Throat - BESSEY
Reliable clamping is achieved by the combination of a 97 mm clamping height and a 60 mm reach, delivering a stable hold for taller workpieces while remaining suitable for confined workspaces; the open mounting hole allows fast, flexible attachment. Order the BAS clamp directly via Metav Werkzeuge or contact our consultants for application advice. BAS compact clamp by BESSEY — 97 mm clamping height, 60 mm reach The BAS compact clamp is a robust compact clamping tool designed for secure holding in metalworking and woodworking applications, offering fast set-up and versatile mounting options. 97 mm clamping height for taller workpieces 60 mm reach for flexible positioning Open mounting hole for quick attachment Compact design for tight workspaces Secure hold for larger and awkward parts The 97 mm clamping height provides a measurable advantage when working with taller fixtures or stacked components; this extra clearance reduces the need for secondary fixturing and shortens setup time. As a compact clamp, the unit balances substantial clamping range with a small footprint, making it suitable for benches and jigs where space is at a premium. The mechanical principle is straightforward: increased clamping height enables contact with higher surfaces while maintaining lateral stability, which contributes to a secure hold during machining or assembly. Fast, adaptable mounting that saves production time An open mounting hole simplifies attachment to existing fixtures or customer-specific plates, allowing through-bolting and easy alignment without disassembly. This feature supports repeatable positioning and speeds changeovers, a clear efficiency gain in series production or mixed-batch workshops. The 60 mm reach ensures the clamping force can be applied slightly offset from the fixing point, which helps when accessing complex geometries or when multiple clamps must share limited bed space. Designed for dependable everyday workshop use Built for routine industrial tasks, the clamp focuses on reliability and low-maintenance operation. The combination of a compact form and robust functional design reduces obstruction around the workpiece while delivering consistent performance across repeated cycles. For users seeking predictable results, the clamp’s specifications—especially the 97 mm clamping height and 60 mm reach—translate directly into fewer setup iterations and more stable processing. For further technical clarification, Metav Werkzeuge can supply detailed application guidance and compatibility notes. For precise advice on the BESSEY BAS compact clamp — featuring a 97 mm clamping height and 60 mm reach — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4123716030NW Type: BAS Product: Compact clamp Manufacturer: BESSEY Label: BAS Spannhöhe 97mm A.60mm o.AL-Druckschuh offen Bessey Facts Clamping height: 97 mm Reach: 60 mm Packaging unit: 1 Design & features Open mounting hole Compact design Open pressure shoe FAQ What is the exact clamping height of this clamp? The clamping height is 97 mm on the BESSEY BAS compact clamp (SKU 4123716030NW), providing clearance for taller workpieces. Can the clamp be fixed to custom fixtures or plates? Yes — the open mounting hole enables through-bolting to plates and fixtures for repeatable alignment and fast installation. Is the clamp suitable for use in tight benches or small jigs? The compact design and 60 mm reach make the clamp well suited to confined workspaces while still delivering effective positioning. What does the open pressure shoe mean in practice? An open pressure shoe allows direct contact with the workpiece and easy replacement or adaptation of the pressure interface to match specific parts. Does this clamp support quick changeovers in production? The combination of measured clamping height, practical reach and the open mounting hole reduces setup time and supports faster changeovers in serial operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
97mm Compact Spanner Closed Mounting Hole, 60mm Reach - BESSEY
Take advantage of a compact, reliable clamping solution with a 97 mm clamping height and 60 mm throat depth for precise, repeatable hold. The combination of generous clamping capacity and a closed mounting hole ensures stable fixture attachment in tight production environments. Order the clamp directly via Metav Werkzeuge or consult the team for application advice. BESSEY BAS Compact Clamp — 97 mm clamping height, 60 mm throat depth The BAS Compact Clamp is a compact bar clamp designed for secure holding in workshop, assembly and light production tasks where a tall clamping range and close-to-edge reach are required 97 mm clamping height for taller workpieces 60 mm throat depth for close-to-edge clamping Closed mounting hole for secure attachment Compact design for tight workspaces Secure hold for taller and awkward workpieces The 97 mm clamping height delivers a measurable advantage when working with thicker assemblies or stacked substrates. This increased vertical capacity allows a larger clamping range without switching tools, reducing setup time and improving throughput. In practice, the higher throat clearance enables clamping over jigs or fixtures while still applying consistent pressure across the workpiece. The result is reliable positioning and fewer reworks in repetitive tasks. Close-to-edge reach that improves accessibility With a 60 mm throat depth, the product provides a practical balance between reach and rigidity. The extended reach makes it possible to clamp near edges or into recesses where standard clamps cannot access, while the compact bar profile maintains stiffness under load. For users unfamiliar with the term: throat depth denotes the distance from the clamp bar to the clamping face, and a deeper throat means better access without relocating the workpiece. Stable attachment and long-term workshop reliability The closed mounting hole offers a secure method for fixing the clamp to workbenches, fixture plates or dedicated fixturing. This feature reduces lateral movement during operations and simplifies integration into permanent setups. Combined with the compact form factor, the clamp is especially suitable for benches with limited space, dedicated assembly stations and small-batch production lines where repeatable accuracy and a tidy workstation are priorities. Practical advantages for industrial and craft settings Built for frequent use, the design emphasises fast handling and dependable performance. The compact construction minimises storage footprint and allows multiple clamps to be deployed across assembly or fixture points. For production planners and workshop managers, this means fewer tool changes and smoother process flow. The clamp is targeted at craftsmen, maintenance teams and light production users seeking a robust, space-efficient clamping solution. Choose the BESSEY BAS compact clamp for dependable clamping performance and streamlined workflows — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 4123716060NW Manufacturer: BESSEY Type: BAS Product type: Compact clamp Packaging unit: 1 Facts Clamping height: 97 mm Throat depth / projection: 60 mm Article number / UID: 4123716060NW Special features Closed mounting hole Compact design for limited space Suitable for workshop and assembly applications FAQ What maximum clamping height does the clamp offer? The clamp provides a clamping height of 97 mm, as specified for the BESSEY BAS compact clamp, allowing secure holding of thicker workpieces. Is the clamp suitable for fixing to a workbench or fixture? Yes, the closed mounting hole enables secure attachment to benches or fixture plates for repeated, stable positioning. Can the clamp reach close to edges and recesses? The 60 mm throat depth permits close-to-edge clamping and access into shallow recesses while maintaining rigidity. Which SKU should be ordered for this configuration? Order SKU 4123716060NW for the BESSEY BAS compact clamp with a 97 mm clamping height and 60 mm throat depth. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
97mm Morse Taper MT1 To B16 Taper Shank, Hardened And Ground, DIN 238 - TECWERK
Benefit from the combination of DIN 238 compatibility, fully hardened and ground construction and an industry-standard MT1–B16 interface for reliable chuck mounting and long service life. Order the taper arbor directly via Metav Werkzeuge or consult our advisors for technical guidance. Taper arbor MT1×B16 (DIN 238) — hardened & ground — TECWERK Taper arbor MT1×B16 (hardened and ground) by TECWERK is a precision part for mounting drill chucks on drilling and turning machines, engineered for consistent concentricity and workshop durability DIN 238 drill‑chuck taper Fully hardened and ground MT1 to B16 interface Long-lasting precision for daily workshop use The fully hardened and ground construction delivers a high level of dimensional stability and wear resistance, making the component suitable for continuous use in metalworking environments. Thanks to the optimised surface finish and heat treatment, the arbor maintains concentricity over prolonged periods, reducing the risk of unexpected runout and improving hole quality. This focus on mechanical integrity translates into fewer rework cycles and steadier production output. Standardised mounting for wide compatibility Compliant with DIN 238, the arbor fits drill‑chuck tapers and allows secure seating of Jacobs‑type chucks via the B16 reception while accepting an Morse taper MT1 spindle. The standard interface simplifies tool logistics by enabling the use of conventional chucks between bench drills and lathes without adapters. For workshops that rely on quick chuck changes, the standardised connection streamlines setup times and supports consistent machining results. Practical workshop benefits and simple upkeep The compact overall length of 97 mm and robust design make the MT1×B16 taper arbor a low‑maintenance solution: routine checks for seating and cleanliness are typically sufficient to preserve precision. The hardened and ground surfaces resist deformation under clamping loads, so the component keeps mechanical tolerances with minimal intervention. When periodic inspections are carried out, focus on seating condition and runout to ensure ongoing performance. For secure, standard‑compliant chuck mounting and reliable workshop performance, contact Metav Werkzeuge for availability and technical advice on the TECWERK MT1×B16 taper arbor Technical data Article number: 2000832316NW Manufacturer: TECWERK Product type: Taper arbor Standard: DIN 238 Facts Overall length: 97 mm External taper: MK1 (Morse taper MT1) Chuck reception: B16 Packaging unit: 1 Special features Fully hardened and ground For mounting drill chucks on drilling and turning machines Drill‑chuck taper compatible with DIN 238 FAQ What standard does this taper arbor comply with? The taper arbor complies with DIN 238, ensuring compatibility with standard drill‑chuck tapers and established workshop practices. Which tapers are involved in the interface? The part features an external MK1 (Morse taper MT1) and a B16 reception for drill chucks, providing a direct connection between spindle and chuck. Is the arbor suitable for regular, industrial use? Yes; the TECWERK taper arbor is hardened and ground for durability and is designed for routine use on drilling and turning machines. How does the hardened and ground finish benefit machining? The heat‑treated and ground finish improves wear resistance and maintains concentricity, which reduces runout and supports consistent hole quality. What measurements should be checked during maintenance? During inspection, check seating surfaces and runout; ensuring clean, undamaged tapers keeps the arbor performing as intended. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
97mm Thread Cutting Holder M5-M22 With Quick-Change, Taper DIN 69871 Form A - TECWERK
Take advantage of precise torque transfer, built‑in axial compensation and a standard SK50 taper for reliable threading operations in production environments; order the tapping chuck directly via Metav Werkzeuge or consult our specialists for application-specific advice. TECWERK Tapping Chuck (DIN 69871A, SK50, M5–M22, 97 mm) The TECWERK tapping chuck is a precision tap holder for CNC and machining centres, designed for secure torque transfer and axial length compensation in metric thread sizes M5–M22. DIN 69871 Form A SK50 taper Length compensation under push and pull Quick-change insert for rapid tool change Ball-guided bushing for improved runout Consistent torque transfer to reduce tap breakage and downtime The quick‑change insert design ensures reliable torque transmission from spindle to tapping tool, keeping the driving force localised and predictable. For metric threads from M5–M22, the holder reduces slippage during interrupted cuts and reversible tapping cycles, lowering the risk of tap breakage and unscheduled stoppages. This mechanical coupling, combined with a robust clamping interface, helps maintain cycle times and stabilises thread quality across batch production. Built‑in axial compensation for uniform thread depth and tool life Equipped with axial compensation that acts on both compression and tension, the holder compensates for small axial variations in the machine or workpiece setup. The length compensation smooths out feed inconsistencies and protects the tap during axial run‑out or slight misalignment, improving thread concentricity and prolonging tool life. The ball‑guided bushing provides guided movement with reduced lateral play, which contributes to repeatable results and a more predictable process window. Standard taper and compact dimensions for easy integration Conforming to DIN 69871 Form A with an SK50 taper, the holder fits standard machining spindles without modification. Compact dimensions (d = 31 mm, overall length A = 97 mm, D = 53 mm) make it suitable for congested tool layouts and allow close tool spacing on multi‑spindle heads. The quick‑change execution simplifies maintenance and reduces tool change time, while the design supports a wide range of tapping operations frequently required in job shops and production departments. For application checks, compatibility confirmation or procurement of the TECWERK tapping chuck, contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical Data Article number: 2000832248NW SKU: 2000832248NW Label: Gewindeschneidfutter DIN 69871A M5-M22 SK50 A.-L.97mm TECWERK Facts Range: M5–M22 Standard: DIN 69871 Form A Taper: SK50 d: 31 mm A (length): 97 mm D: 53 mm Packaging unit: 1 Special features Axial compensation on compression and tension Ball-guided bushing Quick-change insert for torque transmission Quick-change execution Suitable for threading/tapping operations FAQ What thread sizes are supported by this holder? The holder supports thread sizes from M5 to M22 and is optimised for metric tapping applications using the TECWERK tapping chuck. Is the taper compatible with standard machining spindles? Yes, the SK50 taper and conformity with DIN 69871 Form A ensure compatibility with standard spindles and toolholders in CNC machines. How does the axial compensation benefit production? Axial compensation on both push and pull reduces stress on the tap during feed variations and misalignment, prolonging tool life and improving thread consistency when using the TECWERK tap holder. Can the holder be used for reversible tapping cycles? The quick‑change insert and secure torque transfer make the holder suitable for reversible and interrupted tapping cycles common in industrial production. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
97mm Thread Whirling Holder M5–M22 Quick-Change, Steep Taper DIN 69871 Form A - TECWERK
Take advantage of a robust steep taper, reliable axial compensation and the speed of a quick-change torque transfer to keep tapping operations consistent and productive. Order directly via Metav Werkzeuge or contact the consultants for tailored application advice. Thread Tapping Chuck (DIN 69871 Form A) – SK40, M5–M22, 97 mm – TECWERK The Thread Tapping Chuck DIN 69871 Form A is a SK40 toolholder engineered for precision tapping of M5–M22 threads, combining axial compensation with a quick-change system for efficient CNC and toolroom use DIN 69871 Form A steep taper Axial compensation for push and pull Ball-guided bush for precise alignment Quick-change insert for torque transfer Suitable for M5–M22 thread tapping Rigidity and repeatable clamping for reliable thread production The steep taper specified by DIN 69871 Form A and the SK40 mounting deliver high radial and axial rigidity, which is essential for consistent thread quality. By transmitting the torque through a clamped quick-change insert, the system reduces slip and runout so that taps are exposed to controlled forces. This engineering results in higher first-pass acceptance rates and more predictable cycle times, a clear advantage in series production and precision toolrooms. Built-in axial compensation and guided alignment to protect taps The integrated axial compensation for push and pull helps to absorb axial discrepancies during tapping cycles, reducing the risk of broken taps in through and blind-hole operations. Coupled with a ball guide bush, the holder guides the tapping tool concentrically, improving thread concentricity and surface finish. These features extend tool life and lower consumable costs by preventing common failure modes during thread cutting. Fast tool changes and workshop compatibility for smooth workflows Designed with a quick-change execution and standard dimensions (31 mm shank, 97 mm overall length, 53 mm max diameter), the chuck fits standard SK40 spindles and integrates smoothly into CNC machines and tapping units. Its range, M5–M22, covers a broad spectrum of metric applications, from light assembly threads to medium-duty components. The compact design balances accessibility at the spindle with sufficient clearance for chip evacuation and coolant flow, supporting uninterrupted production. Contact Metav Werkzeuge for precise application support and reliable supply of TECWERK thread tapping chucks from our Emmerich stock; technical advisors are available to confirm compatibility and optimise the setup. Technical data Article number: 2000832238NW Label: Gewindeschneidfutter DIN 69871A M5-M22 SK40 A.-L.97mm TECWERK Manufacturer: TECWERK Type: Thread tapping chuck Measurements / core data Standard: DIN 69871 Form A Mounting: SK40 Suitable for: M5–M22 d: 31 mm A: 97 mm D: 53 mm Packaging unit: 1 Features / special functions Steep taper DIN 69871 Form A Axial compensation on push and pull Ball-guided bush Torque transmission via quick-change insert Execution: with quick change FAQ What thread sizes does the chuck support? The chuck supports metric threads from M5 to M22, as specified for the TECWERK thread tapping chuck (SKU 2000832238NW). Is the holder compatible with SK40 spindles? Yes, the holder uses an SK40 mounting and complies with DIN 69871 Form A, making it compatible with standard SK40 tool spindles. How does axial compensation help tapping operations? The axial compensation absorbs push and pull movements during tapping cycles, reducing tap breakage and improving thread finish for a more reliable production output. Can the torque be transferred through a quick-change system? Torque is transmitted by clamping a quick-change insert, enabling fast tool swaps while maintaining secure torque transfer to the tap. Which dimensions should be checked before ordering? Confirm the d: 31 mm, A: 97 mm and D: 53 mm dimensions against spindle clearance and toolholder interface to ensure correct fitment. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
98mm Axial Drive With Smooth Jaws For VNC-FV, 98x76x45mm - Vertex
Take advantage of the axial drive and smooth jaws to achieve consistent clamping and reduced part marking in small workpieces; the compact footprint and low weight ensure simple handling and integration with existing chucks. Order the unit via Metav Werkzeuge or consult the Metav team for tailored advice. VNC-4AD — Vertex axial drive with smooth jaws (for VNC-FV) VNC-4AD is an axial-drive accessory with smooth jaws for the VNC-FV chuck, designed to deliver repeatable clamping for delicate and precision components in workshop environments. Compact 98x76x45 mm footprint Smooth jaws for delicate components Axial drive for consistent clamping force Lightweight 1.57 kg for easy handling Consistent clamping that reduces rework The combination of an axial drive mechanism and smooth jaws delivers a reproducible clamping action that reduces variation between cycles. By transferring axial movement directly into the jaw travel, the unit avoids lateral play common with some rotary-driven systems, resulting in precision clamping and fewer setup readjustments. For production runs where small deviations lead to scrap or additional machining, this ensures processes remain efficient and predictable. Compact design for tight fixtures and quick changeovers With a compact footprint of 98 x 76 x 45 mm and a mass of 1.57 kg, the unit fits into constrained spindle or fixture spaces without substantial modification. Its form factor supports quick integration into existing VNC-FV setups and minimises the need for additional fixturing. The small size also helps to streamline handling during tool changes, supporting faster changeovers and reducing downtime between operations. Gentle handling of sensitive parts for higher yield The smooth jaws provide a non-marking contact surface that is particularly suited to finished or soft materials. Where aesthetics or surface integrity matter, avoiding serrated clamping faces prevents indentation and subsequent rework. The axial actuation delivers a controlled closing action that spreads the clamping force evenly, helping to protect fragile components while maintaining sufficient retention for subsequent machining or inspection steps. Compatibility and workshop applicability Designed specifically as an accessory for the VNC-FV range, the device integrates with established clamping workflows and supports applications in precision engineering, small-batch manufacturing and specialist repair shops. Its straightforward mechanical principle makes it accessible to technicians with basic clamping knowledge while offering the repeatability required by more exacting quality processes. For operations seeking to standardise fixture behaviour, the unit forms a compact and reliable component of a consistent clamping strategy. Choose the Vertex VNC-4AD for dependable axial clamping and contact Metav Werkzeuge in Emmerich for expert purchasing advice and specification guidance — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: VNC-4AD GTIN: 4061905084423 Shop title: Axialer Antrieb und glatte Backen Vertex einfach Online besorgen Facts Dimensions: 98 x 76 x 45 mm Weight: 1.57 kg eCl@ss: 21130302 Special features Axial drive actuation Smooth jaw faces for delicate parts Compatible with VNC-FV chuck systems Gallery image available (detail and main views) FAQ What materials can be clamped with this accessory? The VNC-4AD is intended for general workshop use and, with its smooth jaws, is especially suitable for delicate and finished workpieces where marking must be avoided. Is the VNC-4AD compatible with existing VNC-FV chucks? Yes — the unit is specified for use with VNC-FV systems and is designed to integrate mechanically with that chuck family. How does the axial drive improve repeatability compared with rotary actuation? Axial drive converts linear motion directly into jaw travel, reducing lateral play and delivering more reproducible jaw positions and consistent clamping force across cycles. Does the unit require specialised maintenance? Maintenance is limited to routine inspection of moving parts and jaw faces; the straightforward mechanical design simplifies upkeep and reduces downtime. Can this accessory be used in small-batch production environments? Yes — the compact size and repeatable clamping behaviour make it suitable for small-batch and precision manufacturing where fixture space is limited. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
99.5x64x35mm Hardened L-Jaws For VQC Vises - Vertex
Take advantage of a hardened L‑jaw design and a compact 99.5×64×35 mm footprint for secure, repeatable clamping in VQC vises; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. VQC-100MJL Hard L‑Jaws for VQC Vises — Hardened Clamping, Compact Dimensions (Vertex) The VQC-100MJL is a hardened L‑jaw set developed for VQC series vises to provide secure, repeatable clamping for machining and inspection tasks. Hardened steel design for wear resistance Precision fit for VQC series vises Compact 99.5×64×35 mm footprint Stable clamping weight 1.15 kg Consistent clamping for repeatable machining The hardened L‑jaw set delivers consistent clamping force that reduces part movement and improves machining outcomes. Manufactured for durability, the jaw geometry maintains contact accuracy across repeated cycles, which lowers scrap rates and shortens setup time. The compact dimensions (99.5×64×35 mm) and moderate mass (1.15 kg) make the set easy to handle while preserving stiffness during milling, drilling and light grinding operations. This combination of rigidity and size supports workflows where both floor space and stability matter. Seamless integration with VQC vises for reliable setups Engineered specifically for the VQC series, the jaw profile and mounting surfaces are matched to the vise interface to ensure precise alignment and fast installation. Correctly fitted jaws reduce the need for ad‑hoc adjustments, enabling quicker changeovers between jobs and improving overall throughput. The hardened surface resists deformation under clamping pressure, maintaining repeatability over long production runs and contributing to predictable part tolerances. Durable construction to lower maintenance and downtime A wear‑resistant finish and robust construction extend service life and reduce the frequency of replacements. The design emphasises functional longevity rather than cosmetic features, so maintenance cycles are extended and workshop costs are contained. For shops standardising on VQC vises, the hardened L‑jaw set offers a dependable spare or upgrade that supports continuous operation and predictable scheduling — an advantage for both routine production and specialist tasks. For trusted clamping from Vertex and tailored advice from Metav Werkzeuge’s Emmerich team, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application suitability and supply options Technical Data Article number: VQC-100MJL GTIN: 4061905087387 Manufacturer: Vertex Facts Dimensions: 99.5×64×35 mm Weight: 1.15 kg Eclass: 21029107 Special features Hardened L‑jaw design For VQC series vises Stable clamping geometry Includes technical drawing in product gallery FAQ Are the jaws compatible with all VQC vise sizes? The jaw set is specified for the VQC series and fits the VQC interface as indicated; verify the vise model to ensure full compatibility with the VQC-100MJL jaw geometry. What materials are suitable for clamping with these jaws? The hardened construction of the VQC-100MJL makes it suitable for a wide range of workshop materials; avoid clamping delicate finishes without protective packing to prevent surface marking. How does the hardened surface affect long‑term precision? Hardened surfaces on the jaw set help retain the original contour under load, so the VQC-100MJL sustains repeatability and reduces wear-related variation over prolonged use. Is any special maintenance required? Regular inspection for burrs or chips and routine cleaning will preserve clamping performance; the durable finish minimises maintenance frequency compared with untreated jaws. Can the jaw set be used for inspection as well as machining? Yes — the stable contact and precise fit with VQC vises make the jaw set suitable for both machining setups and measurement tasks where positional repeatability is important. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
99.5x64x50mm Soft Jaws for VQC Vises, Pair - Vertex
Take advantage of precise clamping and reliable workpiece protection combined with a compact footprint for consistent results in small setups. The compatibility with VQC vises and straightforward procurement via Metav Werkzeuge make these soft jaws a practical choice for workshops seeking repeatable, damage-free clamping. Order the accessory directly through Metav Werkzeuge or consult their advisors for application matching. VQC-100MJ Soft Jaws for VQC Vises — Compact 99.5×64×50 mm (Vertex) The VQC-100MJ soft jaws are a protective clamping accessory designed for use with VQC vises, offering a compact profile and repeatable contact surfaces for delicate or finished components Soft jaws for VQC vises Compact 99.5×64×50 mm footprint Weight 2.65 kg for stable clamping Protects workpiece during clamping Minimal footprint with clear protection benefits These soft jaws are manufactured to provide a gentle clamping surface that reduces marking on finished or delicate parts while retaining firm hold. The compact dimension of 99.5 x 64 x 50 mm makes the accessory suitable for confined workspaces and small fixtures, allowing secure support without occupying excessive jaw travel. For operations that require occasional protective clamping, the compact format helps maintain machine accessibility and keeps setups tidy. Stable contact and consistent set-up With a mass of 2.65 kg, the accessory contributes to stable clamping and reduced vibration during light-to-medium machining and inspection tasks. The design supports consistent positioning of the clamped part, which helps to shorten setup times and increases throughput in repetitive operations. Clamping stability is particularly relevant when handling sensitive components where surface finish and dimensional integrity must be preserved. Integration into workshop workflows for repeatable results Designed specifically for compatibility with VQC-style vises, the jaws allow straightforward replacement of standard steel faces to achieve non-marring contact and improved part handling. The geometry and contact surfaces are engineered to support repeatability, so once the clamping position is established, subsequent parts can be secured with the same reference, reducing adjustment cycles. For shops aiming to streamline fixture changes while protecting workpieces, this accessory integrates smoothly into existing clamping routines. For tailored clamping solutions from Vertex, request the VQC-100MJ soft jaws via Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for precise application advice Technical data Article number: VQC-100MJ GTIN: 4061905094750 Name: Soft jaws for VQC vises Dimensions: 99.5 x 64 x 50 mm Weight: 2.65 kg Compatibility: for VQC vises ECLASS: 21029107 SKU: VQC-100MJ FAQ What machines are these jaws designed for? The VQC-100MJ soft jaws are designed specifically for use with VQC vises and their compatible clamping systems, providing protective contact surfaces for delicate parts. Will these jaws prevent marking on finished parts? Yes, the VQC-100MJ accessory replaces harder jaw faces with softer contact surfaces to reduce marking and support gentler clamping of finished components. How does the compact size affect workshop use? The compact footprint of the jaws allows installation in confined setups and small fixtures while preserving jaw travel and machine accessibility. Are these jaws suitable for repeating the same setup reliably? The machined contact geometry of the VQC-100MJ supports repeatable positioning, helping to reduce setup time for batch or series work. Is the VQC-100MJ compatible with other brands of vises? Compatibility is specified for VQC vises; for cross-brand mounting options, consult Metav Werkzeuge to verify fitment and necessary adapters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
99.5x73x35mm Hardened L-Jaws For VQC Vices - Vertex
Take advantage of a hardened jaw profile and precision fit to improve clamping reliability and reduce setup time; order directly via Metav Werkzeuge or consult our specialists for compatibility advice. VQC-100FJL Hard L-jaws — precision clamping for VQC vises, hardened profile VQC-100FJL hard L-jaws designed for secure, repeatable clamping in workshop and light industrial environments, compatible with VQC vises. Hardened steel construction for long service life Precision-machined fit for VQC vises Compact dimensions: 99.5 x 73 x 35 mm Weighs 1.27 kg for stable clamping Improve clamping reliability and cycle time The hardened jaw geometry delivers a consistent grip on workpieces, reducing movement during machining and inspection. A precision fit to the vise dovetail and jaw housing minimises play, which translates into fewer workpiece resets and lower scrap rates. From a rational perspective, less rework and faster set-ups improve throughput: the combination of a hardened contact surface and exact mating faces supports steady clamping forces throughout repeated cycles, enhancing production reliability. Durable, precision-machined construction for dependable use Manufactured to tight tolerances, these L-jaws provide a precision-machined contact area that preserves part geometry and prevents marking. The compact footprint, 99.5 x 73 x 35 mm, together with a mass of 1.27 kg, creates a stable clamping interface suited to short-run and repetitive tasks. Compatibility with VQC vises ensures straightforward replacement of worn jaws, while the robust design contributes to long service intervals and predictable performance in everyday workshop use. Smooth integration into workshop workflows The L-jaw form factor simplifies fixture changes and supports diverse part geometries without complex fixturing. Being tailored for VQC vises, the jaws slot into established clamping routines and reduce the need for bespoke adaptations. Beyond efficiency, the solid build provides tactile reassurance at the bench: the result is a calmer, more controlled workflow where technicians can focus on machining quality rather than compensating for unstable clamping. For fast supply and precise compatibility checks on Vertex VQC-100FJL hard L-jaws, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange immediate dispatch and expert advice Technical data SKU: VQC-100FJL GTIN: 4061905084331 Product name: Hard L-jaws Dimensions & weight Dimensions: 99.5 x 73 x 35 mm Weight: 1.27 kg ECLASS: 21029107 Compatibility & features For VQC vises Hardened L-jaw design Fast dispatch indicated in product description FAQ Are these jaws compatible with VQC vises? Yes. The VQC-100FJL hard L-jaws are designed specifically for use with VQC vises and match the standard jaw mounting geometry. Are the L-jaws hardened for durability? The product is specified as hard L-jaws, indicating a hardened contact surface to resist wear and maintain clamping performance over extended use. What are the exact dimensions and weight of the jaws? The jaws measure 99.5 x 73 x 35 mm and weigh 1.27 kg, providing a compact and stable clamping solution. Will these jaws reduce workpiece movement during machining? Yes. The precision-machined faces and hardened profile of the VQC-100FJL contribute to stable clamping and reduced part movement during operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
99.5x73x50mm Soft Jaws For VQC Vises - Vertex
Precision soft jaws built for stable, protective clamping: compact dimensions and a substantial mass combine to reduce workpiece marking and improve repeatability. Benefit from quick integration with Vertex VQC vises and confident handling of delicate components — order the VQC-100FJ via Metav Werkzeuge or consult the Metav team for compatibility advice. VQC-100FJ Soft Jaws for VQC vises — 99.5×73×50 mm, 2.97 kg (Vertex) The VQC-100FJ soft jaws are designed to provide protective, adaptable clamping for VQC vises in precision machining and assembly applications Compatible with VQC vises Compact 99.5×73×50 mm profile Weight 2.97 kg for stable clamping Increased protection for sensitive workpieces Soft-contact clamping provided by these soft jaws reduces surface damage and the need for secondary finishing. The compliant clamping faces distribute force more evenly than hard-steel jaws, lowering the risk of localised deformation during tightening. For operations where appearance or dimensional tolerances matter, this protection translates into fewer rejects and less rework, improving overall process yield and saving operator time. Compact footprint, greater bench flexibility The small external dimensions of 99.5×73×50 mm make these jaws suitable where space is limited or multiple fixtures share a workbench. Their compact profile supports flexible fixturing without adding undue bulk to the vise setup, enabling quicker changeovers and simpler handling during assembly or measurement tasks. The mass of 2.97 kg helps maintain positional stability under typical clamping loads, contributing to consistent results across batches. Seamless fit for VQC clamping systems Designed specifically for compatibility with Vertex VQC vises, the VQC-100FJ integrates without modification, allowing straightforward replacement of standard jaws. This direct fit reduces downtime during tool changes and simplifies inventory management for workshops using the VQC range. Clear alignment features and matching mounting points ensure reliable seating and repeatable clamping behaviour in every cycle. Robust service life that supports productivity A focus on practical durability underpins the design of these soft jaws: stable contact during holding phases and reduced need for retightening lead to smoother production flow. By preventing damage to finished surfaces, the jaws indirectly preserve downstream processes such as coating, inspection and assembly. The result is a workholding accessory that supports efficiency while protecting product quality. Contact Metav Werkzeuge to arrange supply of Vertex VQC soft jaws (VQC-100FJ) and receive tailored advice on integration and delivery from Emmerich — our consultants will confirm fitment and dispatch options Technical Data Article number: VQC-100FJ GTIN: 4061905084256 Brand: Vertex Data Dimensions: 99.5×73×50 mm Weight: 2.97 kg eClass: 21029107 Special features Designation: Soft jaws Application: for VQC vises Assets: Technical drawing and detailed images available FAQ What workpiece protection do the soft jaws provide? The VQC-100FJ soft jaws protect sensitive surfaces by distributing clamping force and reducing point loads, which lowers the chance of marks and the need for corrective finishing. Are these jaws compatible with all VQC vise sizes? Compatibility is intended for VQC vises; the VQC-100FJ fits standard Vertex VQC mounting interfaces. Check the vise model to ensure full alignment. Can the jaws be used for precision measurement setups? Yes, the soft clamping surface supports measurement tasks by reducing distortion and offering repeatable seating for delicate components. How does the weight affect clamping stability? At 2.97 kg, the jaw mass contributes to steady contact and helps resist shifts during tightening, improving repeatability in machining cycles. Is a modification required to fit these jaws to an existing vise? No modification is generally required for Vertex VQC systems; the VQC-100FJ is designed for straightforward installation on the corresponding vise models. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
99mm Morse Taper Reducer Sleeve MT3 to MT1 Hardened And Ground, DIN 2185 - TECWERK
Benefit from DIN 2185 compliance and a hardened, ground construction that secures accurate tool adaptation while reducing maintenance needs; order the TECWERK reduction sleeve through Metav Werkzeuge for dependable supply and expert advice. TECWERK Reduction Sleeve MK3 to MK1 – DIN 2185, Hardened & Ground A TECWERK reduction sleeve (MK3 to MK1) designed to adapt Morse taper shank tools reliably in larger MK3 spindles for workshop and light industrial machining. DIN 2185 standard compliant Hardened, heat-treated construction Inside and outside ground for precision fit Adapts MK3 spindles to MK1 taper tools Accurate toolholding with standardised geometry The sleeve follows DIN 2185, ensuring a defined interface between spindle and tool that supports concentricity and repeatable alignment. The standardised geometry reduces radial runout and provides a verifiable basis for machining quality when toolholders are exchanged. Because the component is ground inside and out, surface finish and taper fidelity are enhanced, which translates to improved concentricity during rotation and a more consistent cutting result for operations that demand tight tolerances. Robust construction for reduced downtime Manufactured in a fully hardened execution and subsequently ground, the adapter offers superior wear resistance compared with untreated alternatives. The heat treatment increases surface hardness and resilience, while precision grinding establishes the final dimensions required for secure seating. This combination prolongs service intervals and lowers the likelihood of vibration-induced tool failure, which supports uninterrupted production and a lower total cost of ownership for workshop equipment. Seamless compatibility and straightforward integration The component is engineered to convert an MK3 spindle to accept MK1 taper tools, enabling flexibility in tooling without modifications to the machine spindle. Installation is handled by seating the taper and securing with the appropriate drawbar or retention method specific to the machine; the adapter’s design guarantees stable clamping and repeatable remounting. For workshops standardising tooling across machines, this adapter simplifies tool management and reduces the need for multiple holders while maintaining safe and reliable operation. For reliable Morse taper adaptation and assured supply from Emmerich, contact Metav Werkzeuge for technical clarification or to order the TECWERK reduction sleeve (SKU 2000832353NW) — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832353NW Manufacturer: TECWERK Product: Reduction sleeve Standard: DIN 2185 Data Overall length: 99 mm Inner taper: MK1 Outer taper: MK3 Packaging unit: 1 UID: 2000832353NW Special features Hardened and ground inside and outside Suitable for tools with Morse taper Fully heat-treated execution Execution: hardened and ground FAQ What standard does the adapter comply with? The adapter complies with DIN 2185, ensuring standardised taper geometry for repeatable toolholding and reduced runout with the TECWERK reduction sleeve (MK3 to MK1, SKU 2000832353NW). Is this sleeve suitable for heavy-duty machining? The fully hardened and ground construction of this reducer sleeve provides enhanced wear resistance; suitability for heavy-duty use depends on the specific machine and cutting parameters where the sleeve will be employed. How is the reducer installed in the spindle? The Morse taper adapter is seated into the MK3 spindle and the MK1 tool is inserted into the internal taper; clamping is achieved by the machine’s drawbar or retention system to secure the assembly during rotation. Does the sleeve affect concentricity and runout? Precision grinding of the internal and external tapers improves fitting accuracy and helps to minimise radial runout relative to non-ground or worn adapters. Which tools can be used with this adapter? Tools with an MK1 Morse taper shank are compatible when adapted to an MK3 spindle via this sleeve; the component is intended specifically for Morse taper tool integration. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
9mm 5C Collet High-Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of the combination of repeatable clamping accuracy and compact form factor to maintain cycle stability. Order the 5C collet directly via Metav Werkzeuge or consult our advisors for integration support. 5C collet – 9 mm precision workholding by Vertex The 5C collet is a precision workholding component designed for secure clamping of 9 mm shanks in milling and turning setups, offering tight tolerance for repetitive machining tasks. Precision tolerance 0.02 mm For 9 mm shank diameter Compact length 87 mm Consistent clamping for accurate production results The primary benefit of this workholding solution is consistent clamping, realised through a rated 0.02 mm tolerance that reduces runout and scrap rates. Where part-to-part repeatability matters, a tight tolerance directly shortens setup time and lowers reject rates. The collet’s geometry is optimised for concentric gripping of cylindrical shanks, which translates into stable spindle behaviour and predictable tool life when used in regular production loops. This reliability supports predictable machining cycles and improved process capability. Designed for efficient workshop integration A compact format and modest mass make this collet straightforward to handle during tool changes and assembly operations. The length 87 mm and weight 0.21 kg enable quick engagement with standard 5C collet chucks and simple storage in workshop tool racks. This physical convenience pairs with repeatable performance to reduce downtime during clamping operations. For procurement and inventory planning, the component’s compatibility with 5C tooling systems simplifies replacement cycles and spare-part logistics. Compatibility and traceability for quality control Built under the Vertex brand, the collet supports traceable part identification to help maintain quality regimes on the shop floor. The 5C collet (SKU 5C-9) carries a GTIN for inventory systems and batch tracking, assisting workshop managers in audits and maintenance scheduling. Selecting a standardised clamping element such as this enables coherent tool management across multiple machines and departments, easing calibration and inspection workflows while preserving machining accuracy. Discuss technical suitability and order the Vertex 5C collet (SKU 5C-9) via Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for application advice Technical data Article number: 5C-9 GTIN: 4061905095146 Manufacturer: Vertex Facts Diameter: 9 mm Accuracy: 0.02 mm Length: 87 mm Weight: 0.21 kg ECLASS: 21041712 Special features 5C size collet Precision clamping for cylindrical shanks Compact dimensions for easy handling Brand: Vertex FAQ What clamping diameter does this collet support? The collet clamps a 9 mm shank; this is specified for the Vertex 5C collet (SKU 5C-9). What runout tolerance is specified? A tolerance of 0.02 mm is stated for the 5C collet, supporting precise and repeatable clamping. Which machines or chucks is it compatible with? The component is a 5C collet and is intended for use with standard 5C collet chucks and fixtures. What are the dimensions and mass of the collet? Length is 87 mm and weight is 0.21 kg for the Vertex 5C collet (GTIN 4061905095146). Is this an original Vertex component? Yes, the product is supplied under the Vertex brand and carries the SKU 5C-9 for traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
9mm ER 11 Collet Precision Clamping, 5 µm Runout, L 27mm - TECWERK
Data inconsistency detected for SKU 2000832920NW. The supplied information lists the product type as ER 11, while the product label and additional details refer to an ER 16 collet with a 9 mm clamping diameter (TECWERK). These two entries are mutually contradictory and prevent the creation of a reliable, production-ready product description. Please confirm which designation is correct — ER 11 or ER 16 — and verify the associated technical specifications (clamping diameter, overall length and body diameter) so the data set is consistent. Once the authoritative specification is provided, a complete, standards‑compliant description can be produced, including accurate technical data and application guidance. Until the discrepancy is resolved, no definitive product text will be generated. Please update the source data or advise which entry should be treated as the authoritative specification.
9mm ER 16-GB Collet With 7mm Internal Square For Thread Cutting, 15 µm Runout - TECWERK
Data inconsistency detected: the product record contains conflicting model and size information — the field "typ" is listed as ER 16-GB while the label indicates ER25-GB with a 9 mm clamping diameter. Because of these contradictions, an accurate product description cannot be generated. Please provide corrected and consistent product data so a complete technical and marketing text can be produced, ensuring that all details such as model type, size specifications, and clamping diameter are accurate and aligned to avoid further confusion or errors in documentation, which could impact product listings, customer understanding, and overall sales performance.
9mm ER 25-GB Collet With 7mm Internal Square For Thread Cutting, 15µm Runout - TECWERK
Benefit from precise runout accuracy 15 µm and an integrated 7 mm internal square that secures torque transmission for thread-cutting operations; compatibility with ER-style chucks ensures reliable toolholding and reduced setup times. Order the collet directly via Metav Werkzeuge or contact the consultants for further technical advice. Collet ER32-GB — clamping Ø 9 mm with 7 mm internal square (TECWERK) The Collet ER32-GB is an ER-design collet with an internal 7 mm square, engineered for thread-cutting applications and compatible with ER collet chucks and thread-cutting collet holders. Compatible with ER collet chucks Internal square 7 mm for thread cutting Runout accuracy 15 µm Accurate thread-cutting with industrial-grade concentricity The ER-GB design provides runout accuracy 15 µm, which minimises radial play and supports consistently accurate thread cutting and tapping operations. The combination of a clamping Ø 9 mm and a compact length 40 mm results in a compact toolholder that reduces vibration and wear on cutting tools. This level of precision translates into fewer rejected parts, longer tool life and a more predictable production process for workshop and light industrial environments. Efficient compatibility to streamline workshop workflows Designed according to DIN 6499, the collet integrates seamlessly with standard ER chucks and thread-cutting collet holders, enabling quick changeovers and stable torque transmission via the 7 mm internal square. The square drive permits engagement with taps or driving squares during machining, which means less auxiliary tooling and fewer setup steps. Such compatibility reduces machine downtime and harmonises with established clamping systems in small to medium-scale production. Robust specification and quality orientation from TECWERK The ER-GB collet is specified for a clamping diameter of 9 mm and a length of 40 mm, features that support stable clamping for common metric tooling. Conformity with DIN standards and the clearly stated runout accuracy 15 µm provide measurable assurance of performance rather than subjective claims. The design focus is on repeatability and reliable torque transfer, attributes that contribute directly to process stability and higher first-pass yield in thread-related machining tasks. Contact Metav Werkzeuge for ordering information on this TECWERK ER collet and for tailored advice on integrating ER-GB collets into the production line Technical Data SKU: 2000834973NW Manufacturer: TECWERK Product type: Collet GB Product name: Collet ER32-GB — clamping Ø 9 mm, internal square 7 mm Facts Clamping diameter: 9 mm Runout accuracy: 15 µm Length (L): 40 mm Internal square: 7 mm Special features ER-GB design according to DIN 6499 Internal square for thread-cutting applications Suitable for ER collet chucks and thread-cutting collet holders FAQ What is the intended application of this collet? The Collet ER32-GB is intended for precise thread-cutting and tapping operations where the 7 mm internal square provides secure torque transmission. Which chuck systems are compatible with this collet? Compatibility is ensured with standard ER collet chucks and thread-cutting collet holders; the ER-GB design is specified to fit ER-style toolholding systems. How precise is the clamping of the ER32-GB collet? The collet specification states a runout accuracy of 15 µm, which supports high concentricity for demanding machining tasks. What are the key dimensions to consider for setup? Key dimensions are clamping Ø 9 mm, length 40 mm and an internal square of 7 mm, all provided to simplify selection and setup. Is the ER32-GB suitable for heavy-duty tapping? The internal square enhances torque transfer for thread-cutting applications; suitability for heavy-duty tapping should be assessed against machine and tap specifications. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
9mm ER Collet 40mm Clamping Length, 5 µm Runout Accuracy - TECWERK
Combine 5 µm runout precision with full-length tool clamping and DIN 6499‑B compatibility for consistent machining results; order the TECWERK ER 32/470 E collet directly via Metav Werkzeuge or consult our specialists for fitment advice. ER 32/470 E Collet (9 mm Clamping Diameter) — TECWERK ER 32 clamping collet with 40 mm length A ER 32/470 E collet (9 mm) designed for secure, repeatable clamping in ER 32 collet chucks, suitable for precision toolholding in workshops and production environments. Precise 5 µm runout accuracy Full-length tool clamping capability Compatible with ER 32 collet chucks 9 mm nominal clamping diameter, 40 mm length Consistent precision that reduces rework and scrap The ER 32/470 E collet offers a documented runout and repeatability of 5 µm, which directly reduces tool vibration and improves surface finish. In practice, tighter runout means less tool deflection and more reliable hole and shaft tolerances, helping production processes meet stricter specifications with fewer rejects. For operations where part conformity is critical, this level of control supports higher first-pass yield and predictable machining results. Secure grip along the full clamping length for stable machining Tools are held along the entire clamping length, so the cutting tool receives even support across its shank rather than at a single point. This full-length engagement increases bending resistance and reduces chatter during milling or drilling. The collet can also be seated on the guiding chamfer, enabling secure clamping of tools with short shanks or slight runout, while the clamping diameter bridging (nominal minus 1.0 mm) provides practical tolerance for minor size deviations without interim sleeves. Engineered for ER 32 systems and industry standards Manufactured to DIN 6499‑B dimensions, the collet integrates seamlessly with ER 32 collet chucks and tooling systems. Compatibility with established standards ensures interchangeability and predictable behaviour when switching between toolholders and machines. The design removes the need for intermediate sizes, simplifying tool selection and reducing inventory complexity in busy workshops and service departments. Practical dimensions and workshop benefits Key dimensions—L: 40 mm, d: 9 mm, D: 33 mm—make this collet suitable for a wide range of general machining tasks, from drilling to light milling. The clear specification of geometric data allows straightforward verification and insertion into tool lists and CAM setups. When combined with standard ER 32 chucks, the collet supports rapid tool changes and stable operation, contributing to shorter setup times and improved overall equipment effectiveness. For secure, repeatable clamping with 5 µm accuracy, choose the TECWERK ER 32/470 E collet and contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832945NW Product type: ER 32 collet Brand: TECWERK Clamping diameter: 9 mm Package unit: 1 Core data L: 40 mm d: 9 mm D: 33 mm Runout / repeatability: 5 µm Clamping diameter bridging: nominal minus 1.0 mm Special features According to DIN 6499‑B Compatible with ER 32 collet chucks Tools held along full clamping length Can be clamped on the guiding chamfer No interim sizes required FAQ What level of runout precision can be expected from this collet? The TECWERK ER 32/470 E collet delivers a runout and repeatability of 5 µm, ensuring tight concentricity for precision machining tasks. Is the collet compatible with standard ER 32 chucks? Yes, the collet is manufactured to DIN 6499‑B and is compatible with ER 32 collet chucks and corresponding systems. Can shorter tools be clamped securely with this collet? The design permits clamping on the guiding chamfer and provides full-length engagement, allowing secure holding of tools with shorter usable shanks. What sizes does the collet cover and is an intermediate sleeve required? The nominal clamping diameter is 9 mm and the design bridges up to nominal minus 1.0 mm, so intermediate sizes are not required for typical tolerance offsets. Which dimensions are relevant when programming or setting up the machine? Important values are L: 40 mm, d: 9 mm and D: 33 mm; these should be entered into tool lists and setup sheets for correct offsets and clearances. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
9mm ER25 Collet Precision Hold; 34mm Length, 5 µm Runout - TECWERK
Taking advantage of precise standards conformity, minimal runout and reliable full‑length clamping, this collet ensures consistent concentricity and longer tool life in high‑precision setups; order the TECWERK ER 25 collet directly via Metav Werkzeuge or consult our advisers for specification support. TECWERK ER 25 collet – clamping diameter 9 mm, precision to DIN 6499‑B TECWERK ER 25/430 E collet for ER collet chucks, designed for accurate, full‑length tool clamping in machining and workshop environments DIN 6499‑B compliant for safe interchangeability Runout and repeatability 5 µm Holds tools along the full clamping length Clamping diameter bridging: nominal − 1.0 mm Consistent concentricity for repeatable production quality The ER 25 collet is engineered to deliver high concentricity: runout and repeatability of 5 µm keep the cutting edge on centre, reducing vibration and ensuring uniform surface finish. Compliance with DIN 6499‑B guarantees compatibility with standard ER collet chucks, making it straightforward to integrate into existing setups. Because the collet secures tools along the full clamping length, axial play is reduced and end‑mill and drill life is extended. For operations where tight tolerances and repeatable results matter, this clamping element supports improved productivity and fewer reworks. Simple integration and inventory efficiency Designed as an ER‑system component, the collet fits ER 25 chucks without intermediate inserts, so no extra spacer sizes are necessary. The compact dimensions L: 34 mm, d: 9 mm, D: 26 mm mean easy replacement and reduced spindle intrusion. The specification of clamping diameter bridging: nominal − 1.0 mm allows secure gripping when the chosen tool diameter lies below the nominal size, widening the usable range of a single collet and simplifying stock management. Clear dimensional data and standard conformity support predictable tool change routines and reduce machine downtime. Robust handling and practical workshop benefits Tools can be clamped on the chamfer or along the full length, enabling flexibility for different tool shank geometries and improving stability under load. The reliable clamping behaviour lowers the risk of radial slip during heavy cuts, which contributes to operator confidence and safer machining processes. For workshops seeking an economical way to raise consistency, this component offers durable performance with minimal maintenance. If further technical details are required for process planning or compatibility checks, Metav’s technical advisers are available to provide data sheets and application advice. Contact Metav Werkzeuge for precise supply and compatibility advice on the TECWERK ER 25 collet (SKU 2000832930NW) and secure fast delivery from our Emmerich facility. Technical Data Article number: 2000832930NW Type: ER 25 Product type: ER collet SKU: 2000832930NW Facts Clamping diameter: 9 mm Runout / repeatability: 5 µm Length (L): 34 mm Outer diameter (D): 26 mm Inner diameter (d): 9 mm Special features Standard: DIN 6499‑B Suitable for ER collet chucks Clamps tools on the full clamping length Clamping diameter bridging: nominal − 1.0 mm Can be clamped on the guiding chamfer FAQ What tolerance can be expected for concentricity with this collet? The TECWERK ER 25 collet offers a runout and repeatability specification of 5 µm, which supports high‑precision concentricity in machining tasks. Will this collet fit standard ER 25 chucks? Yes, the collet conforms to DIN 6499‑B and is compatible with standard ER 25 collet chucks for straightforward interchangeability. What dimensions should be checked before ordering? Check the key dimensions: L: 34 mm, d: 9 mm, D: 26 mm, and the clamping diameter of 9 mm to ensure compatibility with the intended tool shank and chuck. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
9mm Hexagon Nut DIN 6330B M6 Strength Class 10, SW 10mm - AMF
Take advantage of the DIN 6330B standard fit and strength class 10 for secure, repeatable connections; order this M6 fastening component directly via Metav Werkzeuge or request technical advice from our consultants. AMF Hexagon Nut DIN 6330B M6 — SW 10 mm, Strength class 10 The AMF Hexagon Nut DIN 6330B M6 is a high-strength fastening nut designed for industrial assemblies, offering standardised dimensions for reliable machine and fixture construction. Strength class 10 for high loads DIN 6330B compliant SW 10 mm wrench size Compact overall height 9 mm Consistent performance for demanding assemblies Compliance with DIN 6330B and classification as strength class 10 guarantee a repeatable mechanical performance in bolted joints. The M6 thread form provides familiar compatibility with standard metric fasteners, while the high strength rating supports connections subject to elevated tensile and shear forces. This technical consistency reduces the need for part-specific testing and simplifies process validation in production environments, enabling predictable safety margins and longer service intervals. Precision geometry for secure torque transfer A defined SW 10 mm hexagon across flats and an overall height of 9 mm combine to produce a compact, robust profile that transmits torque reliably. The corner measure of 11.05 mm minimises socket slip and ensures stable clamping during tightening operations. These geometric attributes result in less wear on tools and faster assembly times, which is especially valuable in repetitive or robotic assembly processes where tool engagement stability directly affects cycle time and quality. Suitable applications and integration into workflows Engineered for use in general machine construction, fixtures and plant maintenance, the hexagon nut provides a standard solution for industrial fastening tasks. The standardised dimensions facilitate straightforward substitution in repair and maintenance scenarios and simplify inventory management across workshops and assembly lines. The consistent specification supports procurement rationalisation and aligns with Metav Werkzeuge’s aim to supply dependable components that integrate seamlessly into shop-floor practices. Installation guidance and quality considerations For reliable joints, ensure correct thread engagement and the use of an appropriate SW 10 mm spanner or socket during assembly. Where vibration or thermal cycling is present, consider established locking methods or surface treatment combinations as appropriate for the application; such measures complement the nut’s strength class 10 properties and contribute to extended joint integrity. Traceability via the article number supports quality documentation and part control within maintenance records. For reliable high-strength fastening components from AMF, source this DIN 6330B M6 hexagon nut through Metav Werkzeuge — contact our consultants for specification checks at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000833390NW Description: Hexagon nut DIN 6330B M6 SW 10 mm strength 10 AMF Product type: Hexagon nut Brand: AMF Facts Thread size: M6 Key width: 10 mm Overall height: 9 mm Corner measure: 11.05 mm Strength class: 10 Packaging unit: 1 Special features DIN 6330B compliant High-strength fastening component Compact geometry for constrained spaces Article reference: 4000833390NW FAQ What standard governs the dimensions and tolerances of this nut? The nut is manufactured to DIN 6330B, ensuring standardised dimensions and interchangeability for metric M6 fastening systems. Which wrench size is required for assembly? A 10 mm spanner or socket (SW 10 mm) is specified for reliable engagement and torque transfer during installation. What are the key dimensional values relevant for design and procurement? Important dimensions are M6 thread, overall height 9 mm and corner measure 11.05 mm; these figures support precise component selection and tool choice. Is this component suitable for heavy-duty connections? With a strength class 10 rating, the AMF hexagon nut is intended for higher-load bolted joints typical in industrial and mechanical applications. How can the part be identified for orders and inventory? Refer to the article number 4000833390NW and the description Hexagon nut DIN 6330B M6 SW 10 mm strength 10 AMF when placing orders or updating stock records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Hexagon Nut DIN 6331 M6 Thread Strength 10, Corner Size 11.05 - AMF
Reliable fastening performance follows from DIN 6331 conformity and strength class 10, combined with precise corner machining for consistent torque transmission. The compact 9 mm overall height and SW 10 mm design allow space-saving assemblies. Order the hexagon nut directly via Metav Werkzeuge or ask our consultants for application-specific advice. Hexagon nut DIN 6331 M6 — pressed and milled, Strength class 10 (AMF) the Hexagon nut DIN 6331 M6 is a standard-compliant industrial fastener for high-strength mechanical and assembly applications DIN 6331 standard compliance Strength class 10 for high load Wrench size SW 10 mm Precision milled corners 11.05 mm Consistent clamping force for repeatable assemblies The DIN 6331 specification defines tight dimensional tolerances that enable reproducible fit and torque behaviour in series production. With a thread size M6 and strength class 10, the fastener provides elevated mechanical resistance compared with lower classes, which translates into increased load capacity in bolted joints. Engineers and purchasers benefit from fewer rework cycles because the fastener geometry and hardness are designed to maintain clamping force under cyclic loading. Durable manufacturing that reduces installation issues Manufactured by a combination of forming and machining, the pressed and milled production method ensures economical blanks with precision-corner machining where needed. The SW 10 mm flats and corner size 11.05 mm are milled to reduce rounding under spanners, improving serviceability in assembly lines and maintenance operations. The compact 9 mm overall height minimises axial space while retaining sufficient thread engagement for secure joints in confined assemblies. Simple integration into standard workflows As a metric hexagon nut, the component fits existing M6 bolt inventories and common tool sets without special adapters. Traceability is supported through the SKU and product labelling, enabling streamlined stock management and quality checks. The design reduces handling complexity on the workshop floor and supports predictable assembly times, which is particularly valuable in repetitive or automated fastening processes. Contact Metav Werkzeuge today for procurement guidance on AMF hexagon nuts (SKU 4000833405NW) and to arrange tailored supply and delivery from Emmerich. Technical data Article number: 4000833405NW Product type: M6 Standard: DIN 6331 Manufacturer: AMF Packaging unit: 1 Dimensions & measurable data Overall height: 9 mm Wrench size SW: 10 mm Corner dimension: 11.05 mm Thread size: M6 Strength class: 10 Manufacture & special features Pressed and milled Precision-corner machining Designed for industrial fastening FAQ What thread and bolt sizes are compatible with this nut? The Hexagon nut DIN 6331 M6 (AMF, SKU 4000833405NW) matches standard M6 metric threads and is compatible with M6 bolts and studs manufactured to corresponding metric specifications. What does strength class 10 indicate for this nut? Strength class 10 denotes a high mechanical resistance level for the AMF hexagon nut, indicating elevated tensile and yield performance relative to lower classes and suitability for higher-load bolted joints. Is the nut suitable for tight or confined assembly spaces? Yes — the compact 9 mm overall height and SW 10 mm flats make the hexagon nut DIN 6331 M6 suitable for space-restricted assemblies where reliable thread engagement is required. How precise are the external dimensions of the nut? Dimensions comply with DIN 6331 and include a milled corner measure of 11.05 mm, which is intended to ensure consistent spanner fit and minimise rounding during installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Quick-Change Insert SE 7mm Square Shank for DIN 374/376 M12, L3 4mm L4 21.5mm - TECWERK
Take advantage of the quick-change design and precise 7 mm square shank to cut downtime and keep tapping processes consistent; the compact Size 1 insert ensures a secure fit for DIN 374/376 M12 tapping. Order the insert directly via Metav Werkzeuge or consult the advisers for matching holders and integration guidance. TECWERK Quick-change insert SE 9 mm x 7 mm, Size 1 — for DIN 374/376 M12 The TECWERK Quick-change insert SE 9 mm x 7 mm (Size 1) is a compact tool-holding solution designed for secure retention of thread taps in quick-clamping systems used for DIN 374/376 M12 tapping operations. Quick-change design for fast tool swaps Square shank torque transmission 7 mm Compatible with DIN 374/376 M12 taps Compact Size 1 with precise dimensions Reduce machine downtime with fast, repeatable tool changes The quick-change insert is engineered to allow rapid replacement of taps where a quick-clamping device is used, so setup time is minimised and production flow is maintained. By using a standardised insert format with a defined 9 mm engagement and a 7 mm square shank for drive, exchange procedures are simplified and the time spent on changeovers is reduced. The design is oriented towards workshop efficiency and is compatible with established tap-holding systems, where the insert is clamped and the tap is held securely by the quick-clamping mechanism. Secure torque transfer through the square shank for reliable tapping Torque is transferred via the 7 mm square shank, which provides positive drive and reduces slippage compared with round-shaft solutions; this ensures consistent thread quality and repeatability. The insert is supplied without safety coupling, intended for assemblies where the clamping system provides the necessary protection; the torque path is therefore direct and mechanically robust. For users integrating the insert into existing tool posts or holders, the direct square-shank transmission facilitates straightforward compatibility checks and predictable torque behaviour under load. Precise dimensions for predictable fit and alignment Compact Size 1 geometry offers defined dimensions that aid in selecting the correct insert for a holder and for maintaining alignment in confined setups. Key measures include L1: 18.5 mm, L4: 21.5 mm and a head diameter of D: 30 mm, which combine to give a low-profile, stable interface between holder and tap. These dimensions are especially useful when planning tool layouts for multi-spindle machines or crowded tool turrets, because the predictable envelope simplifies interference checks and fixture design without sacrificing access to the workpiece. Practical integration notes for production environments Inserts of this type are intended for applications where thread taps are retained by a quick-clamping device; different shank sizes require matching inserts, so consistency across a tool set is recommended to avoid mismatches. The compact construction supports dense tool arrangements and is suitable for both one-off setups and serial production where frequent tool changes are expected. Documentation and measured dimensions support planning and spare-part provisioning, ensuring that changeovers remain quick and error-free. Contact Metav Werkzeuge for tailored advice on integrating TECWERK quick-change inserts into existing tapping systems and for assistance in selecting matching holders and spares Technical data Article number: 4000832639NW Manufacturer: TECWERK Type: Quick-change insert SE Packing unit: 1 Numbers / Core technical data Diameter: 9 mm Shank square: 7 mm L1: 18.5 mm L3: 4 mm L4: 21.5 mm L5: 7 mm D: 30 mm D1: 19 mm Designs / Special features Supplied without safety coupling Inserts for taps held by quick-clamping device Torque transmission via shank square Requires matching inserts for different shank sizes Suitable for DIN 374/376 M12 taps FAQ How is the thread tap held when using this insert? The insert works with a quick-clamping device that retains the thread tap while the insert provides the interface and drive via the 7 mm square shank. Is this insert compatible with DIN 374/376 M12 taps? Yes, the TECWERK Quick-change insert SE 9 mm x 7 mm (Size 1) is specified for use with DIN 374/376 M12 tapping applications. What are the key dimensions to check when fitting the insert into a holder? Check the shank square 7 mm, overall engagement 9 mm, and the axial dimensions such as L1: 18.5 mm and L4: 21.5 mm to ensure correct fit and clearance. Can the insert be used where a safety coupling is required? This item is supplied without a safety coupling; compatibility with safety devices depends on the holder and machine configuration rather than the insert itself. What is the SKU for ordering and identification? The SKU for this quick-change insert is 4000832639NW for reference when sourcing or requesting spares. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
9mm Quick-Change Insert SE 7mm Square Shank for DIN 374/376 M12, L3 5mm L4 35mm - TECWERK
Benefit from rapid changeovers, torque transfer via a 7 mm square shank and direct compatibility with DIN 374/376 M12; order the insert directly via Metav Werkzeuge or consult our advisors for installation support. Quick-change insert SE 9 mm x 7 mm, Size 2 — for DIN 374/376 M12 (TECWERK) The Quick-change insert SE 9 mm x 7 mm, Size 2 is a compact holding insert for taps conforming to DIN 374/376 M12, engineered for fast tool changes in workshop and production environments. Quick-change insert for tap holding Torque via 7 mm square shank Compatible with DIN 374/376 M12 taps Compact dimensions for tight setups Faster set-ups and uninterrupted production flow The quick-change design significantly reduces downtime during tap changes by allowing taps to be held securely by the integrated quick-clamping mechanism. This means changeovers are completed more quickly than with traditional fixed holders, supporting higher productivity on the shop floor. The insert is particularly suited to environments where frequent tool exchanges are required, enabling a smoother workflow and less machine idle time. Reliable torque transmission and clear mechanical behaviour Torque is transmitted through the 7 mm square shank, providing a direct and measurable path for power transfer between toolholder and machine spindle. The insert is supplied without a safety coupling, so torque behaviour is deterministic and suited to controlled production settings where overload protection is handled elsewhere in the process. Key length and diameter references are designed to integrate with standard tap geometries, ensuring consistent thread formation when used with DIN 374/376 M12 taps. Compact geometry that simplifies fixture planning With concise overall dimensions and a compact profile, the insert reduces interference in confined fixtures and multi-tool arrangements. The measured values for critical interfaces support reliable clamping: short engagement and accessible clearances make it simpler to position the tool accurately in tight nests. For workshops aiming to save space without compromising process stability, the compact form factor supports denser tool layouts and easier maintenance access. Practical compatibility and selection guidance Different shank sizes require corresponding inserts, so the insert is intended to be combined with matched holders depending on the shank standard in use. The design holds taps via the quick-clamping device, which stabilises the thread tap during operation and delivers repeatable results across batches. For mixed tooling fleets, keeping a small stock of matched inserts reduces set-up complexity and prevents downtime caused by incompatible interfaces. Contact Metav Werkzeuge for tailored advice on integrating TECWERK quick-change inserts into production setups and to confirm availability from the Emmerich warehouse. Technical data Article number: 4000832643NW Label: Schnellwechseleinsatz SE 9mmx7mm Gr.2 f.DIN 374/376 M12 Type: Größe 2 Manufacturer: TECWERK Packaging unit: 1 Core measurements Diameter (tap interface): 9 mm Square shank: 7 mm L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm D1: 31 mm Special features Compatible with DIN 374/376 M12 taps No safety coupling Taps secured by quick-clamping device Torque transmission via shaft square Different inserts required for different shank sizes FAQ Is this insert compatible with DIN 374/376 M12 taps? Yes. The quick-change insert SE 9 mm x 7 mm, Size 2 is designed specifically for use with taps to DIN 374/376 M12 and matches the relevant tap interface dimensions. How is torque transmitted through the insert? Torque is transmitted via the 7 mm square shank, providing a direct mechanical link between holder and spindle; this design ensures predictable torque transfer during tapping operations. Does the insert include a safety coupling? No. The insert is supplied without a safety coupling; overload protection must be provided elsewhere in the toolchain or machine control system. Are other shank sizes supported with the same insert? Different shank sizes require corresponding inserts. This particular insert uses a 7 mm square shank; for alternate shank dimensions, the matching insert must be selected. What are the key dimensions for fixture planning? Relevant interface dimensions are: diameter 9 mm, square shank 7 mm, L1: 32 mm, L3: 5 mm, L4: 35 mm, L5: 11 mm, D: 48 mm and D1: 31 mm. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
9mm Quick-Change Insert SES 7mm Square For DIN 374/376 M12, Adjustable Torque-Limiting Clutch - TECWERK
Benefit from the combination of a torque-limiting adjustable safety clutch and a compact 7 mm square drive for reliable tap protection and uninterrupted production—order directly via Metav Werkzeuge or consult the specialists for application advice. SES quick-change insert 9 mm x 7 mm, Size 1 for DIN 374/376 M12 (TECWERK) A SES quick-change insert 9 mm x 7 mm, Size 1 engineered to protect taps during thread forming and tapping to DIN 374/376 M12 through controlled torque transmission. Adjustable safety clutch for torque limitation Prevents thread tap breakage during operation Torque transmitted via 7 mm shank square Compact design suited to DIN 374/376 M12 Reduce downtime with controlled torque release The integrated adjustable safety clutch offers a practical safeguard against sudden overloads, which significantly reduces the risk of tap fracture and the associated stoppages. By limiting peak torque the unit helps protect both the tool and the workpiece, translating into fewer unscheduled tool changes and lower scrap rates. For production environments this means improved process reliability and predictable maintenance intervals. Secure power transfer through a precision interface Torque is conveyed through the 7 mm square shank, providing a direct, backlash-minimised connection between the driver and the tap. This method of torque transmission ensures consistent force application and reduces torsional play, which benefits thread quality and repeatability. The insert is compatible with taps to DIN 374/376 M12, and different shank sizes can be accommodated by selecting the appropriate SES insert for the respective driver. Compact form for tighter work envelopes and better control With a short overall length and compact footprint the unit reduces overhang and improves handling in confined setups. The compact geometry supports faster spindle acceleration and more predictable torque response, which is especially valuable in automated or semi-automated tapping stations. The design also enables straightforward replacement of worn inserts, maintaining operational continuity without complex adjustments. Practical compatibility and workshop convenience Installation and interchangeability are simplified by the standardised square shank interface and the clear designation of the size class. The insert’s torque-limiting function is a targeted measure to avoid costly tap breakage while preserving machining accuracy. For workshops seeking to streamline their tooling inventory, the SES insert offers a focused solution for controlled tapping in accordance with recognised DIN thread standards. Contact Metav Werkzeuge for expert selection guidance and reliable supply of TECWERK SES quick-change inserts, available from the Emmerich warehouse for fast delivery and technical advice. Technical data Article number: 4000832670NW Product name: Schnellwechseleinsatz SES 9mmx7mm Gr.1 for DIN 374/376 M12 Product type: Size 1 Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 9 mm Square drive: 7 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm L1: 18.5 mm D1: 19 mm Suitable for: DIN 374/376 M12 Special features Adjustable safety clutch for torque limitation Prevents thread tap breakage Torque transmission via shank square Requires appropriate insert for differing shank sizes FAQ What protection does the adjustable clutch provide? The adjustable safety clutch on the TECWERK SES quick-change insert limits peak torque to protect taps from overload, reducing the likelihood of fracture and unplanned downtime. Which tap standards are compatible with this insert? This quick-change insert is designed for taps conforming to DIN 374/376 M12 and transmits torque via the 7 mm square shank for a secure connection. Can the insert be used with different driver shank sizes? Different shank sizes require the corresponding SES insert; the TECWERK SES unit is part of a set of inserts allowing compatibility across a range of driver dimensions. How does the square shank affect thread quality? The 7 mm square shank provides a direct torque interface that minimises play and ensures consistent torque transfer, which supports repeatable thread quality. Is the clutch adjustable on-site or does it require recalibration? The clutch is adjustable to set a desired torque threshold; adjustment is straightforward and intended to be performed during normal tool setup to match tap and material requirements. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
9mm Quick-Change Insert SES 7mm Square Shank for DIN 374/376 M12, Torque-Limited Safety Clutch - TECWERK
Take advantage of the combination of controlled torque protection and quick-change convenience to reduce tap breakage and increase uptime in the workshop; order the part through Metav Werkzeuge or contact their advisers for application support and matching to other shank sizes. Quick-change insert SES 9 mm x 7 mm Size 2 – TECWERK The Quick-change insert SES 9 mm x 7 mm Size 2 is a compact exchange insert for M12 tapping applications, designed to limit torque and protect taps in production and repair environments. Adjustable safety clutch for torque limitation Reduces risk of tap breakage during threading Torque transmitted via 7 mm square shank Compatible with DIN 374/376 M12 tapping tools Minimise tap breakage with controlled torque transfer The core advantage of this insert is the adjustable safety clutch, which provides torque limitation to protect thread-cutting tools during interrupted or demanding operations. By disengaging at a preset torque, the mechanism reduces the likelihood of tap breakage, lowering scrap rates and maintenance time. For workshops that run mixed batches or repair tasks, this protective function improves process reliability and reduces the frequency of tool changeovers. Fast exchange and reliable drive connection for production speed Designed as a quick-change insert, the component enables rapid replacement of worn or different-size inserts without complex retooling, preserving machine uptime. The torque transmission via the 7 mm square shank ensures a positive mechanical drive connection that resists slippage under load. Compatibility with DIN 374/376 M12 tapping tools makes it straightforward to integrate into existing tapping holders; different shank sizes require the corresponding insert types to maintain correct fit and torque transfer. Defined dimensions for predictable engagement and fit Key dimensions are provided for precise planning and fixture adjustments: L1: 32 mm, L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm, D1: 31 mm, with a nominal tool diameter of 9 mm and a 7 mm square drive. These measurements inform how the insert engages with the tapping holder and determine achievable thread depth and clamping clearance. Clear dimensional data supports jig design and helps avoid interference during automated or manual tapping cycles. Built for workshop reliability and straightforward inventorying The unit is supplied as a single-piece pack and suits repair shops and production lines where predictable torque behaviour and quick serviceability matter. The integrated safety clutch not only protects tools but also contributes to consistent process outputs, which is especially valuable when threading on harder or variable materials. For operations seeking to standardise tooling, the SES quick-change format simplifies stockkeeping while maintaining the flexibility to match different shank standards. For application advice or to confirm the correct TECWERK quick-change insert for a specific holder or shank, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 4000832678NW SKU: 4000832678NW Product type: Quick-change insert SES Brand: TECWERK Packaging unit: 1 Dimensions Diameter D: 50 mm Diameter D1: 31 mm Nominal tool diameter: 9 mm Square drive: 7 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm Features & compatibility Adjustable safety clutch for torque limitation Prevents tap breakage Torque transmission via shank square For DIN 374/376 M12 Different inserts required for other shank sizes FAQ What thread sizes is this insert designed for? The SES quick-change insert is specified for use with DIN 374/376 M12 tapping tools and is matched to that standard for reliable engagement. How does the adjustable safety clutch protect taps? The adjustable safety clutch limits torque transmission once the set threshold is reached, which in the SES insert prevents sudden overloads that can cause tap breakage. Is the 7 mm square drive the only available shank size? This particular insert features a 7 mm square drive; other shank sizes require the corresponding SES variants to ensure correct torque transfer and fit. Can this insert be used in automated tapping heads? Yes, the quick-change format and defined dimensions such as L1, L3 and D support integration into automated tapping setups, provided the holder accepts the SES geometry. What is included in the delivery? The product is supplied as a single unit (packaging unit 1) ready for fitting into the matching quick-change holder. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com