Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
120° Vertical Clamp 68mm Arm 1,500N Thrust, 5,000N Holding Force Black Oxide Massive Arm - Kukamet
Take advantage of a solid holding arm and a compact vertical foot combined with a holding force up to 5,000 N for reliable fixture performance. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Vertical clamp 242 — vertical clamping lever with solid holding arm and 5,000 N holding force by Kukamet Vertical clamp 242 is a compact, heavy‑duty clamping device intended for secure vertical fixturing in workshops and production environments *Solid holding arm, heavy-duty construction *Vertical foot for space-saving mounting *Max holding force 5,000 N *Patinated black finish, 68 mm arm Increased process reliability through concentrated clamping power The clamp delivers a holding force of up to 5,000 N and a pressing force rated at 1,500 N, providing dependable component retention during machining or assembly. In practical terms, the holding force indicates the maximum static grip the fixture can maintain, while the pressing force describes the clamping energy applied during engagement. These values translate into fewer repositioning operations and reduced cycle times, which supports consistent throughput in repetitive production tasks. Built for the clamping technology sector, the unit's performance reduces the risk of workpiece movement and scrap. Easy integration and compact mounting for flexible fixture layouts With a vertical foot mounting arrangement and a 68 mm arm, the device is suitable for space‑constrained fixtures and gantry stations where a low profile is essential. The vertical base allows the clamp to be anchored directly to plates or tooling blocks, simplifying layout design and shortening setup times. The compact format also makes it straightforward to place multiple clamps in close proximity, enabling balanced clamping across larger parts. Where quick reconfiguration is required, the rugged construction ensures repeatable alignment and minimal downtime during changeovers. Durable finish and robust construction for long service life The unit features a solid holding arm and a blackened, burnished finish that resists wear in daily shop‑floor conditions. The weight of approximately 1.186 kg and the sturdy build contribute to tactile stability when engaged; this robustness reduces the need for frequent replacement and supports lower total cost of ownership over the long run. Maintenance is straightforward: regular inspection of the lever and mounting points keeps clamping accuracy at specification. The product is designed for industrial use and complements existing tooling systems without complex retrofitting. Discuss application needs with Metav Werkzeuge — our specialists at Metav Werkzeuge can advise on fixture design and compatibility for Kukamet clamping elements; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data SKU: 242-4-D-C1 GTIN: 8682843520796 Weight: 1.186 kg Arm length: 68 mm Maximum holding force: 5,000 N Maximum pressing force: 1,500 N Mounting type: vertical foot Angle: 120° Material / finish: blackened, burnished Facts Category: Clamping technology Model designation: 242 Massiver Haltearm: yes Special features Solid holding arm Space-saving vertical base Robust industrial finish Compact footprint FAQ What is the maximum holding capacity of this clamp? The clamp provides a maximum holding force of 5,000 N; the pressing force during engagement is 1,500 N for secure retention. Can the clamp be mounted on standard fixture plates? Yes, the vertical foot design allows direct mounting to tooling plates and fixture blocks for compact integration. What does the 68 mm arm mean for practical use? A 68 mm arm indicates the projection from the mounting point to the clamping interface, balancing reach and rigidity for common workpiece sizes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 750 N Thrust, 2,500 N Hold Force, Black Oxide - Kukamet
Take advantage of the combination of compact design, reliable holding capability and a corrosion-resistant finish for dependable fixture work. Order the Vertical Clamp directly via Metav Werkzeuge or consult our specialists for tailored advice. Vertical Clamp 242 — vertical base lever clamp with 120° swing angle by Kukamet Vertical Clamp 242 is a robust lever-style vertical clamp designed for fixture and jig applications where space-saving mounting and consistent holding are required. Compact vertical base design Holding force 2,500 N Clamping force 750 N 120° swing angle for flexible positioning Consistent, measurable clamping performance for series operations The device delivers a holding force of 2,500 N and a clamping force of 750 N, values that define repeatable retention and secure pressure during handling or machining. The distinction between holding force (resistance to pull-out under load) and clamping force (applied compressive pressure at the clamp point) is crucial for fixture design; both figures enable planners to assess whether the component meets static and dynamic requirements. Measurable force ratings support quick comparison across clamps and reduce the need for iterative testing on the shop floor. Space-efficient mounting and ergonomic operation for tighter setups A vertical base mounting saves lateral space on assemblies and simplifies integration into stacked or side-by-side fixturing. The 120° swing angle increases positioning options, allowing the lever to be moved clear of tools or adjacent parts without disassembly. With a lightweight build (0.325 kg) the clamp minimises added mass on delicate jigs while remaining rigid under load. These characteristics shorten set-up times and support efficient workflows in repetitive production or repair tasks. Workshop durability and low-maintenance finish for everyday use The clamp is finished in blackened (black oxide) coating, offering corrosion resistance and reduced glare beneath machine lights. The lever-style mechanism provides rapid engagement and release, helping to speed cycle times while maintaining consistent pressure. The simple construction reduces maintenance needs; routine inspection and basic lubrication are sufficient to preserve function. As part of a reliable supply chain, the product benefits from quality control and availability through an established distribution partner for uninterrupted production planning. Request specification advice from Metav Werkzeuge or order the Vertical Clamp 242 via Metav Werkzeuge for a dependable addition to fixtures and jigs. Technical data SKU: 242-2 GTIN: 8680731505993 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Facts Weight: 0.325 kg Holding force: 2,500 N Clamping force: 750 N Swing angle: 120° Special features Vertical base mounting Blackened (black oxide) finish Lever clamp design Category: Spanner FAQ What forces are specified for this clamp? The Vertical Clamp 242 from Kukamet specifies a clamping force of 750 N and a holding force of 2,500 N, allowing straightforward selection for fixture requirements. Is the clamp suitable for vertical mounting in a compact fixture? Yes, the clamp features a vertical base for direct, space-saving installation in compact jigs and assemblies. What finish protects the clamp against corrosion? The clamp is supplied with a blackened (black oxide) finish, providing basic corrosion resistance and low surface reflectivity for workshop environments. How heavy is the clamp for fixture weight calculations? The device weighs 0.325 kg, supporting light-weight fixturing without compromising rigidity under specified loads. What is the SKU for ordering or referencing the product? The product is identified as SKU 242-2 and is supplied by Kukamet Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 86mm Massive Holding Arm 2000N Clamping Force 6000N Retaining Force Black Oxide Finish - Kukamet
Take advantage of a massive holding arm, holding force up to 6,000 N and a compact 86 mm reach for secure, repeatable fixturing; order the vertical clamp directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Vertical clamp 242 — 86 mm arm, 6,000 N holding force The Vertical clamp 242 is a robust lever clamp for vertical mounting, designed for workshop fixtures and production jigs where secure, repeatable clamping is required Massive holding arm for high stability 86 mm arm reach for compact setups Holding force up to 6,000 N Vertical foot mounting for secure attachment Consistent high-force clamping for reliable production The clamp delivers a holding force up to 6,000 N while requiring an actuation force of 2,000 N, which translates into secure workholding without excessive operator effort. This performance improves cycle stability and reduces rework caused by slippage. The lever mechanism converts input force into a dependable clamping action, making the device suitable for repeated operations on assembly lines or machining fixtures. The documented force data enables planners to calculate safety margins and plan tooling layouts with confidence. Space-saving arm and secure vertical mounting A compact 86 mm arm reach and a vertical foot mounting ensure the clamp integrates into confined jigs and tooling stacks with minimal interference. The 120° operating angle provides a clear path for loading and unloading components while maintaining contact force across the clamped area. At a mass of 2.12 kg, the unit is substantial enough to remain stable in use yet compact to retrofit into existing fixtures. These dimensions support efficient layout planning and a lower overall machine footprint. Durable finish and robust construction for long service life The body features a blackened finish that provides basic corrosion resistance and a professional appearance, while the massive holding arm increases fatigue resistance under repetitive loads. The materials and hardwearing design reduce maintenance intervals and contribute to consistent clamping geometry over time. Routine checks of pivot points and mounting bolts are sufficient for preventive care, keeping downtime to a minimum and preserving clamp performance throughout production cycles. Ready for straightforward integration into tooling systems Designed as a lever-style vertical clamp, the unit is compatible with common fixturing conventions and can be mounted directly to machine tables or fixture plates using the vertical foot. The clear technical values—arm length, forces and angle—support rapid engineering decisions during fixture design. Metav’s quality-filtered stock in Emmerich ensures dependable supply and traceable sourcing for industrial buyers who prioritise continuity and component consistency in their toolroom procurement. Contact Metav Werkzeuge for tailored fixturing advice and a quotation for the Kukamet 242 vertical clamp, supplied from Emmerich with fast, reliable delivery Technical data Article number: 242-6-D-C1 GTIN: 8682843520840 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 86 mm Actuation force max: 2,000 N Holding force max: 6,000 N Operating angle: 120° Weight: 2.12 kg Special features Blackened finish Vertical foot mounting Massive holding arm Category: Clamps FAQ What is the difference between actuation and holding force? Actuation force is the input required to operate the lever; holding force is the clamping force maintained on the workpiece. The Kukamet Vertical clamp 242 converts an actuation force of 2,000 N into a holding force up to 6,000 N. Can the clamp be fitted to existing fixture plates? Yes. The clamp is designed for vertical foot mounting and can be bolted to standard fixture plates or machine tables, enabling straightforward retrofitting into existing jigs. Is the finish corrosion resistant for workshop use? The unit has a blackened finish that offers basic corrosion protection and a durable surface for workshop environments; periodic inspection of pivot points is recommended to maintain long-term performance. What types of applications suit this clamp? The clamp is suitable for production jigs, assembly fixtures and machining setups where repeatable, high-force clamping is required; its compact arm length and robust design favour tight or modular fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 88.5mm Massive Arm, 750N Press Force, 2,500N Holding Force, Blackened - Kukamet
Take advantage of the combination of high holding force, a massive holding arm and compact installation dimensions to keep fixtures secure and production running smoothly; order the clamp via Metav Werkzeuge or consult our specialists for application advice. 241 Vertical clamp by Kukamet — heavy-duty vertical clamping with 2,500 N holding force A 241 Vertical clamp engineered for secure vertical clamping in jigs, fixtures and assembly stations, featuring a robust holding arm and a compact horizontal-foot mounting for stable installation. Massive holding arm, robust construction 2,500 N holding force for secure fixturing 88.5 mm arm length for versatile reach Horizontal-foot mounting for stable installation Consistent retention for production-critical fixtures The 241 Vertical clamp delivers measurable stability where repeated clamping cycles and precise positioning matter. With a holding force of 2,500 N and a closing force of 750 N, the clamp separates the initial actuation from static retention: the lever provides controlled engagement while the body maintains steadfast grip. This distinction reduces workpiece shift during machining or assembly and supports reliable tolerances in mass production. The numeric force values allow planners to compare clamping performance objectively and to specify the clamp in technical documentation with confidence. Robust design minimises downtime and maintenance Constructed with a massive holding arm and a blackened finish, the clamp resists wear while presenting a low-reflectivity surface that is beneficial in inspection and welding environments. The 120° lever angle permits compact actuation paths and prevents interference with adjacent tooling. At just 0.32 kg, the unit is lightweight enough for easy handling yet engineered for durability under frequent use. These characteristics translate into fewer replacements and predictable service intervals, supporting efficient workshop workflows and lower total cost of ownership in production settings. Flexible integration into fixtures and tooling concepts The horizontal-foot mounting and an arm length of 88.5 mm make this clamp suitable for a wide range of fixture geometries and workpiece contours. The compact footprint and defined lever travel simplify fixture design, enabling closer packing of clamps on plates and reduced obstruction of part handling. Where repeatable clamping is required—such as in assembly lines, welding jigs or inspection fixtures—the combination of measured forces, compact dimensions and a robust arm offers a practical balance between performance and ease of installation. Choose the Kukamet 241 Vertical clamp for dependable fixture retention and contact Metav Werkzeuge for technical advice or to place an order — Metav Werkzeuge provides centralised supply and fast, reliable delivery from Emmerich to European workshops Technical data Article number: 241-2-D-C2 GTIN: 8682843520581 Manufacturer: Kukamet Facts Arm length: 88.5 mm Holding force: 2,500 N Closing force: 750 N Weight: 0.32 kg Angle: 120° Special features Horizontal-foot mounting Massive holding arm Blackened finish Category: Clamps / Spanner FAQ What clamping forces does the 241 Vertical clamp provide? The 241 Vertical clamp provides a closing force of 750 N and a static holding force of 2,500 N, enabling secure retention in fixtures and jigs. Is the clamp suitable for compact fixture layouts? Yes, the horizontal-foot mounting and 88.5 mm arm length make the clamp suitable for close-packed fixture arrangements and tight installation spaces. What is the lever angle and why does it matter? The lever operates at a 120° angle, which reduces the required actuation path and helps avoid interference with neighbouring components during clamping cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp Horizontal Base 7,000 N Clamping Force Blackened Finish - Kukamet
Take advantage of a compact design with a 7,000 N clamping force and a horizontal base for stable mounting; order the 221 vertical clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Kukamet 221 Vertical clamp – heavy-duty 7,000 N, horizontal base The 221 vertical clamp provides secure, repeatable holding for jigs and fixtures in production and workshop environments. Heavy-duty clamping force 7,000 N Horizontal base for stable mounting 120° lever angle for compact operation Blackened, burnished finish Secure holding power that keeps production moving With a rated clamping force of 7,000 N, this vertical clamping device delivers consistent pressure where it matters most. The high clamping force reduces part movement during machining and assembly, lowering the risk of rework and improving throughput. The mechanism’s lever action is designed for rapid engagement and release, enabling quicker cycle times in repetitive assembly or machining tasks while maintaining a reliable hold. Compact mounting that saves space on fixtures The horizontal base enables straightforward installation on flat fixture plates or machine tables, making the clamp easy to integrate into existing jigs. The 120° lever angle keeps the operating envelope small, which is particularly useful in compact setups or when multiple clamps are placed close together. At a weight of 0.94 kg, the unit combines portability with robustness, simplifying both temporary and permanent fixture configurations. Robust finish and straightforward durability A blackened, burnished surface finish offers a uniform appearance and a hard-wearing outer layer. The surface treatment supports daily workshop use and helps the clamp retain its functional look over time. The construction focuses on low-maintenance operation: the simple lever and toggle design minimises moving-part complexity, which supports long service intervals and predictable performance in demanding production routines. Contact Metav Werkzeuge for ordering details, delivery options and compatibility checks for the Kukamet 221 vertical clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 221-4 GTIN: 8682843522714 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 Facts Clamping force (max): 7,000 N Angle: 120° Weight: 0.94 kg Special features Mounting: horizontal base Finish: blackened, burnished Category: Clamp (Spanner) FAQ What is the maximum clamping force of the clamp? The Kukamet 221 vertical clamp delivers a maximum clamping force of 7,000 N, suitable for demanding holding tasks in fixtures and jigs. How is the clamp mounted and operated? The unit is mounted using its horizontal base and features a 120° lever angle for compact, ergonomic operation; the item is listed as SKU 221-4. Does the surface finish provide corrosion protection? The Kukamet 221 is supplied with a blackened, burnished surface finish; the product data specifies the finish but does not quantify corrosion resistance. What is the weight of the device and is it portable? The clamp weighs 0.94 kg, combining a lightweight profile with robust clamping capability for easy repositioning or integration into fixtures. Which applications suit this type of clamp? As a vertical toggle clamp with high clamping force, the 221 is well suited to production fixtures, jigs and assembly tasks where secure, repeatable holding is required Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp Horizontal Base, 11 kN Clamping Force, Black Oxide - Kukamet
Take advantage of a compact, high-force clamping solution that combines a maximum 11,000 N hold with a lightweight body for fast, repeatable fixturing; order the clamp directly via Metav Werkzeuge or consult the Metav team for integration advice. 221 Vertical Clamp by Kukamet — 11,000 N, horizontal foot mounting The 221 Vertical Clamp is a lever-operated vertical clamping device designed for secure workholding in jigs, fixtures and machine setups across metalworking environments 11,000 N clamping force for firm workholding Horizontal foot for stable base mounting 120° lever angle for ergonomic operation Blackened finish for corrosion resistance Consistent, measurable holding power for reliable production With a rated max. clamping force of 11,000 N, this vertical clamping unit delivers a clearly quantifiable holding capability that supports consistent machining and assembly cycles. The high force rating reduces slippage and rework, improving throughput and process reliability. The clamp’s lever clamp mechanism converts operator input into a secure hold with minimal set-up complexity, simplifying repetitive fixture tasks while keeping adjustments straightforward. Small footprint and proven ergonomics cut setup time Weighing 1.82 kg, the unit combines a compact profile with a stable base that minimises added mass on fixtures while remaining robust in service. The horizontal foot allows direct, low-profile mounting to tables and plates, saving space in crowded setups. A 120° lever travel offers an ergonomic operating angle that reduces operator effort during frequent clamp/unclamp cycles, helping to speed changeovers without compromising safety or repeatability. Surface treatment and mechanical resilience for workshop use The component is supplied with a blackened, burnished finish, providing basic surface protection and a professional appearance that integrates well into established tooling systems. The treated surface reduces visible wear and helps prevent surface corrosion in everyday shop conditions. The simple mechanical design keeps maintenance minimal and permits easy inspection of wear-prone parts, supporting long service intervals and dependable performance. Where this clamp fits into production processes Engineered for general-purpose vertical clamping tasks, the device is suitable for fixture plates, assembly jigs and secondary operations where a firm vertical hold is required. The combination of compact footprint and high clamping capacity makes it appropriate for both manual and semi-automated stations where space and repeatability matter. Installation is straightforward thanks to the horizontal mounting foot, enabling rapid retrofitting into existing tooling layouts. For tailored guidance on integrating Kukamet clamping solutions into a production line, contact Metav Werkzeuge in Emmerich — Metav’s specialists provide application support and reliable supply from the European stock at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 221-6 GTIN: 8680731505894 Manufacturer: Kukamet Weight: 1.82 kg Core specifications Max. clamping force: 11,000 N Lever angle: 120° Weight: 1.82 kg Design & features Horizontal foot mounting Blackened, burnished finish Lever-operated vertical clamp No additional special features FAQ What maximum holding force does the clamp provide? The 221 Vertical Clamp (Kukamet, SKU 221-6) provides a maximum clamping force of 11,000 N, offering high holding power for reliable fixturing. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot configuration; the clamp’s base is designed for secure bolting to plates and fixture surfaces. What is the significance of the 120° lever angle? A 120° lever travel gives an ergonomic operating position and comfortable actuation, reducing effort during repeated clamp cycles. What finish does the clamp have and what does it provide? The clamp is supplied with a blackened, burnished finish, which improves surface resistance to everyday wear and gives a professional appearance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With 2000 N Thrust, Massive Holding Arm, Blackened Finish - Kukamet
Take advantage of a compact, heavy-duty clamp that combines a massive holding arm with reliable mounting and measurable clamping performance; order through Metav Werkzeuge for dependable supply and specification support. 241 Vertical Clamp by Kukamet — massive holding arm, horizontal-foot mounting 241 Vertical Clamp is a vertical lever clamp designed for secure workholding in assembly and machining tasks, fitted with a horizontal foot for stable fixture attachment. Massive holding arm for steady clamping Horizontal-foot mounting for simple installation 130 mm arm for extended reach Holding force 6,000 N for secure fixation Black blued finish for workshop durability Secure clamping performance that keeps production moving The clamp delivers a clear performance profile: a holding force of 6,000 N and a clamping (actuating) force of 2,000 N, providing repeatable fixation for medium to heavy-duty fixtures. These measurable values translate into predictable behaviour on the shop floor, reducing setup time and minimising rework. The mechanism is configured to maintain consistent pressure once engaged, which supports process stability and enhances throughput where reliable part retention is required. Robust arm and mounting for repeatable setup A 130 mm arm length extends reach without compromising stiffness, while the horizontal foot mounting simplifies integration into jigs or fixture plates. The massive holding arm and compact geometry reduce flex under load, so positioning remains exact from cycle to cycle. For production lines or machining centres that demand fast clamping actions and secure part retention, the solid construction supports rapid, repeatable set-ups and consistent component alignment. Workshop-ready finish and compact handling Finished in black blued steel, the clamp resists surface wear typical in workshop environments while maintaining a professional appearance. At approximately 2.222 kg, the unit is substantial enough for stable fixation yet compact for use in confined fixtures or assembly rigs. The combination of a durable surface treatment and modest mass makes the clamp suitable for frequent handling and long-term use without excessive maintenance demands. Easy integration into existing fixtures and toolrooms The clamp’s 120° operating angle and lever-style action facilitate rapid engagement and disengagement in assembly sequences. The toggle-style mechanism provides secure latching with a short actuation path, enabling ergonomic handling in repetitive operations. With a design that focuses on mechanical reliability and straightforward mounting, the clamp integrates into fixture arrays or bespoke tooling where dependable, quick clamping is an operational priority. The clear technical specification aids compatibility checks before installation. Contact Metav Werkzeuge for guidance on integrating the Kukamet 241 Vertical Clamp into production rigs and to benefit from direct supply and specification advice from our Emmerich centre — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data SKU: 241-6-D-C2 GTIN: 8680731507195 Model: 241 Category: Clamps eClass: 21041717 ETIM: EC011973 Facts Weight: 2.222 kg Arm length: 130 mm Holding force: 6,000 N Clamping force (actuating): 2,000 N Operating angle: 120° Special features Massive holding arm Horizontal foot mounting Black blued finish Toggle / lever clamp mechanism Robust construction for industrial use FAQ What holding and clamping forces does the clamp provide? The Kukamet 241 Vertical Clamp offers a holding force of 6,000 N and an actuating/clamping force of 2,000 N (SKU 241-6-D-C2), values suited to stable workholding in assembly and machining fixtures. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the clamp is delivered for secure attachment to a flat fixture plate or jig base. What reach does the clamp arm provide? The arm length is 130 mm, providing extended reach for parts that require clearance from the fixture base. Is the surface finish suitable for workshop environments? Yes. The clamp is supplied with a black blued finish that improves surface wear resistance and is appropriate for routine workshop use. What type of mechanism does the clamp use? The unit employs a toggle/lever clamp mechanism, designed for quick actuation and secure latching in repetitive operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With 750 N Thrust, 2,500 N Holding Force, Black Oxide Finish - Kukamet
Take advantage of a compact, reliable clamping solution with a black blued finish and a horizontal foot for simple integration. The combination of a high holding force (2,500 N) and a defined clamping force (750 N) ensures stable workholding and consistent processing. Order the vertical clamp via Metav Werkzeuge or consult our advisers for tailored selection. Vertikalspanner 241 – vertical clamp with horizontal foot and black blued finish (Kukamet) The Vertikalspanner 241 is a compact vertical clamp designed for secure workholding with a horizontal mounting foot, suited to light-industrial fixtures and workshop jigs. Vertical clamp 241 with horizontal foot Black blued finish for corrosion protection Holding force up to 2,500 N Compact design, weight 0.325 kg Stable clamping for repeatable production The clamp delivers a holding force of 2,500 N and a clamping force of 750 N, providing measurable, repeatable retention for short-cycle fixtures and manual operations. These figures describe how much load the device can resist once set and how much downward force the actuator generates; both are relevant when specifying a fixture for vibration-prone machining or for assembly tasks where part slippage must be avoided. The compact, low-mass construction contributes to quick tool changes and reduces the inertial load on the fixturing system, supporting steadier cycle times on the shop floor. Compact mounting and straightforward integration With a horizontal foot for mounting and a 120° operating angle, the clamp integrates easily into existing fixture plates or custom jigs without requiring complex adapters. The small footprint and 0.325 kg mass permit close-packed arrangements on a fixture plate, enabling multiple clamps to be used where space is limited. The design philosophy prioritises practical installation and minimal interference with machining paths, so the clamp can serve in both prototyping benches and light production cells. Durable finish and low-maintenance operation The black blued finish provides corrosion resistance and a professional appearance while keeping maintenance simple. The surface treatment reduces the need for frequent reconditioning in standard workshop environments and helps preserve sliding and bearing surfaces. For users seeking steady performance over time, the combination of robust surface protection and a solid mechanical design supports predictable service intervals and lower lifecycle disruption. Contact Metav Werkzeuge for bespoke advice on integrating Kukamet vertical clamps into fixtures and to secure reliable supply directly from our Emmerich distribution centre Technical Data SKU: 241-2 GTIN: 8680731505979 Manufacturer: Kukamet Facts Weight: 0.325 kg Holding force: 2,500 N Clamping force: 750 N Operating angle: 120° Special features Material/finish: black blued finish Mounting: horizontal foot Category: vertical clamp FAQ What is the maximum holding force of this clamp? The clamp provides a holding force of 2,500 N as stated for the Vertikalspanner 241 (SKU 241-2 by Kukamet), suitable for many fixture applications requiring secure retention. Can the clamp be mounted directly to a fixture plate? Yes, the horizontal foot allows direct mounting to standard fixture plates; the compact design supports close placement of multiple clamps on a plate. Is the surface protected against corrosion? The black blued finish on the clamp provides corrosion resistance and helps reduce routine maintenance compared with untreated steel surfaces. For which applications is this clamp best suited? The clamp is intended for light-industrial and workshop fixtures where a compact vertical clamping element with defined clamping and holding forces is required. Does the clamp require special maintenance procedures? Routine inspection and standard lubrication of moving surfaces are sufficient; the durable finish reduces the frequency of reconditioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With Horizontal Foot, 2.5 kN Thrust, 6.5 kN Holding Force, Blackened Finish - Kukamet
Take advantage of dependable holding and decisive clamping performance combined with compact, service-friendly design for consistent fixture results. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for tailored mounting advice. Vertical clamp 225 — 120° toggle, 2,500 N clamping force (Kukamet) The Vertical clamp 225 is a compact toggle clamp designed for vertical clamping operations, suited to jigs and fixtures that require a sturdy horizontal base for fixation Vertical clamp with 120° toggle angle Holding force up to 6,500 N Clamping force 2,500 N Horizontal base for secure mounting Consistent, measurable clamping performance for production environments The design delivers reliable clamping force with a rated 2,500 N closing capacity and a much higher holding force of 6,500 N, making the unit suitable where sustained restraint is essential. These figures translate into predictable fixture behaviour under load and reduce the need for repeat adjustments during run-on production. The mechanism’s 120° toggle action ensures positive lock and rapid operation, speeding cycle times while maintaining repeatability. For specification-driven procurement, this clamp offers clear technical benchmarks that support process stability and auditability. Robust finish and secure mounting that minimise downtime A blackened finish provides surface protection against wear and everyday workshop contamination, prolonging service intervals and preserving appearance in visible assemblies. The clamp’s horizontal base simplifies integration into existing tooling plates or subplates and reduces auxiliary brackets, lowering preparation time before first use. At 2.1 kg, the component is easy to handle during fitting yet substantial enough to resist vibration in medium-duty applications. The combination of durable surface treatment and compact mass translates into fewer maintenance interventions and predictable life-cycle costs. Designed for efficient workflows and trusted supply Integrating this toggle clamp into jigs and production fixtures reduces setup time through its direct mount and positive-toggle action, improving throughput without complex adjustments. The compact footprint and solid mechanical design mean fixtures can be built smaller and positioned closer together, saving bench space and improving ergonomics. Sourced from Kukamet and offered via Metav Werkzeuge, the clamp benefits from Metav’s quality filtering and stock continuity, which supports reliable replenishment and consistent batch quality for industrial and trade customers. For robust, repeatable clamping from Kukamet, request technical advice or place an order through Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 225-6 GTIN: 8682843523827 Manufacturer: Kukamet Core specifications Clamping force (max): 2,500 N Holding force (max): 6,500 N Weight: 2.1 kg Angle: 120° Features & materials Mounting: horizontal base Finish: blackened (brünierte) Category: Vertical clamp EClass: 21041717 ETIM: EC011973 FAQ What is the difference between clamping force and holding force? Clamping force refers to the operative closing force of the mechanism (2,500 N for this clamp), while holding force describes the maximum retained load the clamp can resist without slipping (6,500 N for the 225 vertical clamp). Can the clamp be mounted on a jig plate with standard holes? Yes, the clamp features a horizontal base for direct mounting to fixture plates; use the base holes to secure the clamp to a subplate or jig with appropriate fasteners. Is the surface finish suitable for industrial environments? The blackened finish offers improved wear resistance and protection against light corrosion, making it suitable for workshop conditions and repeated handling. How heavy is the clamp and does that affect fixture design? At 2.1 kg the clamp is substantial enough to resist vibration but light enough for straightforward fitting; its mass supports stable operation without imposing excessive load on light-weight fixtures. Is this clamp suitable for repetitive production cycles? Yes, the toggle mechanism and positive lock at 120° are intended for repeated clamping cycles, providing rapid operation and reliable repeatability for jig and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With Massive Holding Arm, 750 N Closing Force, 2,500 N Holding Force, Blackened - Kukamet
Take advantage of a robust, lever-type vertical clamp that pairs a massive holding arm with a compact footprint and clearly specified forces for reliable fixture work; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. 241 Vertical Clamp by Kukamet — Massive holding arm, 120° operating angle A 241 Vertical Clamp engineered for secure vertical clamping in fixtures and jigs, combining a heavy-duty holding arm with horizontal-foot mounting for straightforward installation Massive holding arm for stable clamping 138.5 mm arm length for deep reach 2,500 N holding force for secure fixation Horizontal-foot mounting for simple installation Robust design for repeatable, heavy-duty clamping The clamp features a massive holding arm and a lever-style mechanism that delivers 2,500 N holding force alongside a 750 N clamping force, providing a clear distinction between fixation capability and direct clamping action. This separation improves process reliability in repeat setups: the high holding force secures the workpiece against lateral movement, while the clamping force generates the contact pressure required for a secure hold. The 120° operating angle supports aggressive engagement without sacrificing repeatability, making the component appropriate for precision jigs where consistent results are essential. Compact mounting that speeds up set-up and changeover Fitted with horizontal-foot mounting, the device installs quickly onto fixture plates or tooling boards, reducing set-up time in small-series and jobbing environments. The 138.5 mm arm length provides sufficient reach for parts located away from the datum plane while the unit’s 0.354 kg weight keeps the overall fixture mass low. These characteristics translate into faster changeovers and lower handling effort during assembly, which in turn supports higher throughput and fewer interruptions on the shop floor. Practical compatibility and workshop benefits Designed as a lever clamp for vertical applications, the unit integrates into conventional clamping schemes without complex adaptations. The blackened finish gives the component surface protection and a subdued appearance that fits industrial settings. Delivered as a compact, ready-to-fit element, it reduces the need for custom fabrication and helps standardise clamping across multiple stations. Combined with Metav’s quality control and distribution from Emmerich, this clamp offers a pragmatic path to consistent clamping performance in production and maintenance operations. For robust, repeatable clamping choose the Kukamet 241 vertical clamp and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable supply. Technical Data Article number: 241-2-D-C3 GTIN: 8680731507188 Brand: Kukamet Facts Arm length: 138.5 mm Angle: 120° Weight: 0.354 kg Holding force (max): 2,500 N Clamping force (max): 750 N Special features Mounting: horizontal foot Finish: blackened finish Massive holding arm Lever clamp design FAQ What is the difference between holding force and clamping force? The 241 Vertical Clamp by Kukamet separates the two: the specified 2,500 N holding force resists movement of the workpiece once positioned, while the 750 N clamping force is the direct pressure applied to secure the part during processing. Can the clamp be mounted on standard fixture plates? Yes. The horizontal-foot mounting of the Kukamet 241 permits direct attachment to fixture plates and tooling boards, enabling quick integration into existing jigs. Is the arm length sufficient for offset parts? With a 138.5 mm reach, the arm on the Kukamet 241 is designed to access parts set back from the datum, offering practical clearance for many common fixture arrangements. What surface protection does the device have? The clamp is supplied with a blackened finish, providing surface protection and a low-reflective appearance suitable for industrial use. Which applications are suitable for this lever clamp? The Kukamet 241 is intended for vertical clamping tasks within fixtures and jigs, where repeatable fixation and compact mounting are required; it is suitable for production and workshop environments that use lever-style clamping solutions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertikalspanner, Haltearm mit 5000N Haltekraft, waagerechter Fuß, schwarz brüniert - Kukamet
Kukamet Vertikalspanner 222 überzeugt durch die Kombination aus robuster Haltekraft und kompakter Bauform; der massive Haltearm liefert 5000 N Haltekraft, die spezifizierte Druckkraft beträgt 1500 N, sodass wiederholbare und sichere Werkstückspannung gewährleistet ist. Kontakt und Bestellung über Metav möglich, technische Fragen gern per E‑Mail oder Telefon. Vertikalspanner 222 von Kukamet Der Vertikalspanner 222 ist ein kompakter Hebelspanner für präzise Werkstückspannung an Prüf‑ und Bearbeitungsplätzen. Vertikalspanner »222« von Kukamet Haltearm: 5000 N Haltekraft Druckkraft: 1500 N Befestigung: waagerechter Fuß Gewicht: 1,18 kg Robuste Spannung für wiederholbare Ergebnisse Der Haltearm des Spanners sorgt für stabile Fixierung und überträgt Kräfte zuverlässig, sodass Bearbeitungs‑ und Messprozesse reproduzierbar bleiben. Die Kombination aus 5000 N Haltekraft und einer Druckkraft von 1500 N ermöglicht sicherere Spannpositionen bei kleinen bis mittleren Werkstücken. Dieses Kraftprofil reduziert Nachspannungen und minimiert Stillstandzeiten in der Werkstatt. Kompakte Bauform erleichtert Einbau und Handhabung Dank des geringen Gewichts von 1,18 kg und der Auslegung auf einen waagerechten Fuß ist die Montage einfach und flexibel möglich. Die kompakte Konstruktion erlaubt die Integration in beengte Vorrichtungen und Prüfstände, ohne zusätzliche Ballastgewichte oder aufwändige Umrüstungen. Die geringe Masse unterstützt schnelle Einrichtprozesse und vereinfacht Handhabung sowie Lagerung. Präzision durch konstruktive Details Der Spanner arbeitet mit einem Winkel von 120°, der sichere Haltepunkte auch bei schräger Belastung bietet. Die Oberfläche ist schwarz brüniert ausgeführt, was Korrosionsschutz mit geringer Reibung verbindet und die Lebensdauer der Maschine unterstützt. Solche konstruktiven Merkmale tragen direkt zur Prozesssicherheit bei und schonen Spann‑ sowie Werkstückoberflächen. Vielseitiger Einsatz in Werkstatt und Produktion Als Hebelspanner eignet sich das Produkt für Spannaufgaben an Mess‑, Montage‑ und Bearbeitungsplätzen. Die Kombination aus Haltekraft und kompakten Abmessungen macht den Spanner geeignet für schnelle Wechselvorrichtungen, Prüfvorrichtungen und manuelle Spannplätze. Anwender profitieren von kürzeren Rüstzeiten und höherer Wiederholgenauigkeit bei Serien‑ und Einzelteilprüfungen. Einfache Montage und sichere Befestigung Der waagerechte Fuß erlaubt stabile Befestigung auf Maschinentisch oder Vorrichtung, Bohrbild und Schraubbefestigung richten sich nach der vorhandenen Vorrichtung. Die Handhabung ist auf Alltagstauglichkeit ausgelegt, sodass Umrüstungen ohne großen Aufwand möglich sind. Ersatzteilbedarf bleibt gering, wodurch Betriebsbereitschaft und Verfügbarkeit gesteigert werden. Empfehlung: Metav für Kauf und Beratung zum Kukamet Vertikalspanner 222 kontaktieren – E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 222-4-C Marke: Kukamet Bezeichnung: Vertikalspanner 222 Daten Druckkraft: 1500 N Haltekraft: 5000 N Winkel: 120° Gewicht: 1,18 kg Besonderheiten Befestigungsart: waagerechter Fuß Material: schwarz brüniert Haltearm mit 5000 N Haltekraft Hebelspanner FAQ Ist der Vertikalspanner 222 für Serienprüfstände geeignet? Der Vertikalspanner 222 von Kukamet ist aufgrund der hohen Haltekraft von 5000 N und der kompakten Bauform gut für Serienprüfstände geeignet; die robuste Konstruktion erlaubt wiederholbare Fixierung bei kurzen Rüstzeiten. Wie wird der Kukamet Vertikalspanner 222 montiert? Die Montage erfolgt über den waagerechten Fuß; übliche Schraubbefestigung an Maschinentisch oder Vorrichtung ist vorgesehen, wodurch eine sichere und formschlüssige Verbindung entsteht. Was bedeutet Haltekraft in Bezug auf den Vertikalspanner 222? Die Haltekraft beschreibt die maximale Zug‑/Halteleistung des Haltearms; beim Vertikalspanner 222 beträgt diese 5000 N und definiert die Belastungsgrenze für formstabile Fixierung ohne Verrutschen. Eignet sich das Gerät für präzise Messaufgaben? Ja, die konstruktive Auslegung und die definierten Kraftwerte des Kukamet Vertikalspanner 222 unterstützen präzise Messaufgaben, da Vibrationen und Verschiebungen durch die hohe Haltekraft reduziert werden. Welche Pflege ist für den Vertikalspanner 222 vorgesehen? Regelmäßige Sichtprüfung und leichte Schmierung der beweglichen Teile reichen in der Regel aus; bei Bedarf empfiehlt sich die Rückfrage beim Händler oder die technische Beratung von Metav mit Angabe der Artikelnummer 222-4-C.
123x83x83mm Demagnetiser Mini Unit 110VA AC‑110/220V, For Large Calipers - Vertex
Take advantage of a compact footprint and robust 110 VA performance to remove residual magnetism quickly, improving measurement accuracy and reducing rework. Order the device directly via Metav Werkzeuge or consult the Metav specialists for specification checks and delivery from Emmerich. VDM-9 Mini demagnetiser by Vertex — 110 VA, compact footprint The VDM-9 mini demagnetiser is a compact unit for demagnetising precision calipers and other measuring tools used on large workpieces. Compact footprint 123 x 83 x 83 mm 110 VA power for reliable demagnetising Dual AC 110/220 V supply voltage Lightweight at 1.8 kg for easy handling Improve measurement accuracy by removing residual magnetism Residual magnetism on measuring tools and workpieces can cause small but critical deviations in readings. The VDM-9 uses controlled demagnetising to reduce magnetic retention that leads to tool attraction and measurement offsets. With a rated 110 VA output, the device provides a stable demagnetising field that is effective for common workshop requirements; this translates into fewer rechecks, less rework and a more predictable quality process. For users of precision calipers, the result is more consistent readings and reduced risk of scrap. Space-saving design that supports workshop workflow A compact footprint of 123 x 83 x 83 mm and a weight of 1.8 kg make the unit easy to place on a busy bench or move between workstations. The small casing conserves bench space while the dual-voltage capability (AC‑110V/220V) ensures compatibility with varied power supplies across suppliers and sites. The combination of portability and compatibility helps integrate demagnetising into the normal inspection routine without requiring large, dedicated equipment, supporting faster throughput and less interruption to production. Straightforward operation and reliable integration Operation is intentionally simple so demagnetising can be carried out as part of routine inspection. The device is suitable for demagnetising measuring tools and items used on large workpieces, preventing magnetic build-up that can affect clamping and measurement. Built to support workshop needs, the unit aids in maintaining measuring tool condition and extends service intervals for gauging equipment. Clear specifications and a compact form factor make the unit easy to document in maintenance procedures and quality records. For technical advice or to arrange supply from Metav Werkzeuge in Emmerich, contact the Metav team at info@metav-werkzeuge.com or call +49 2822 7131930 — consultants are available to verify specifications and delivery options Technical Data Article number: VDM-9 GTIN: 4061905083624 Manufacturer: Vertex ECLASS: 21020801 Facts Dimensions: 123 x 83 x 83 mm Weight: 1.8 kg Power: 110 VA Supply voltage: AC-110V/220V Special features Suitable for precision calipers and large workpieces Compact design for limited bench space Portable handling FAQ How does a demagnetiser affect measurement accuracy? Demagnetising removes residual magnetism that can attract metallic particles or influence contact points; the VDM-9 mini demagnetiser reduces such influences to support consistent readings from precision calipers and other gauges. Is the unit suitable for use on large workpieces? Yes, the device is specified for applications involving large workpieces and for demagnetising measuring tools used in those contexts. What power supplies are supported? The VDM-9 accepts AC‑110V/220V, enabling use on commonly available mains supplies without additional transformers. Is the product portable for shop-floor use? The compact dimensions and weight of 1.8 kg make the unit easy to position and move between inspection points, enhancing shop-floor flexibility. Can the demagnetiser be integrated into regular inspection routines? Yes, the straightforward operation and small footprint allow it to be incorporated into routine quality-control checks and maintenance workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
124.5x78x40mm Hard L-Jaws for VQC Vises, Hardened Steel - Vertex
Robust, hardened L-jaws deliver durable clamping and a precise seating for VQC vises; their compact dimensions and substantial mass ensure stable grip and repeatable results in workshop and light industrial settings. Benefit from consistent workholding and straightforward replacement options — order via Metav Werkzeuge or consult the team for application advice. VQC-125FJL hardened L-jaws for VQC vices — precision fit, compact size The VQC-125FJL hardened L-jaws are designed as directly compatible clamping jaws for VQC vices, providing a maintenance-friendly solution for repetitive holding tasks in workshops and production cells. Hardened L-jaws for durable clamping Precision fit for VQC vices Compact dimensions: 124.5 x 78 x 40 mm Solid weight for stable grip 2.09 kg Consistent grip through hardened construction The hardened design of these L-jaws preserves the jaw geometry under repeated load cycles, delivering wear resistance and long-term dimensional stability. That resistance reduces the need for frequent dressing or replacement, which minimises process interruptions and supports continuous production. By keeping the clamping faces true, the accessory contributes to consistent part positioning and less rework in serial operations, improving overall throughput and process reliability. Precise seating and reduced setup time A precision fit with VQC vices ensures reliable alignment and repeatability during successive setups. The specified dimensions 124.5 x 78 x 40 mm allow quick verification against existing fixturing and support efficient planning for tool offsets and centrelines. For small-batch manufacturing and fixture-dependent tasks, a secure and predictable clamping interface shortens setup time and improves first-piece accuracy, which is especially valuable where tolerances and surface finish are critical. Stable mass and practical integration for workshop use At 2.09 kg, these jaws add mass to the vice assembly that suppresses vibration and helps maintain steady contact pressures during machining or inspection routines. Compatibility with VQC vices simplifies inventory management and replacement logistics in the workshop. The design emphasises straightforward integration and serviceability, supporting uninterrupted workholding without introducing complex maintenance procedures or special tools. Choose the Vertex VQC-125FJL hardened L-jaws from Metav Werkzeuge for dependable, repeatable clamping in production and workshop environments — contact Metav Werkzeuge for application guidance or to check stock availability in Emmerich. Technical Data Article number: VQC-125FJL GTIN: 4061905093487 Eclass: 21029107 Core technical data Dimensions: 124.5 x 78 x 40 mm Weight: 2.09 kg Materials & compatibility Fits VQC vices Hardened jaws Intended for workshop workholding FAQ Are these jaws compatible with all VQC vices? The VQC-125FJL is specified for VQC vices; compatibility with other vice models depends on mounting geometry and should be verified against the vice specifications. What are the exact external dimensions and weight? Dimensions are 124.5 x 78 x 40 mm and the mass is 2.09 kg, as stated in the product technical data. What material are the jaws made from and is a coating applied? The product data indicates hardened jaws but does not specify the base material or any coating in detail. How do these jaws affect clamping accuracy? Hardened, properly matched jaws maintain jaw geometry and reduce deformation, which supports repeatable clamping and better positional accuracy for successive workpieces. Is installation or special adaptation required to replace existing jaws? These jaws are designed for VQC vice compatibility; any adaptation depends on the current vice configuration and mounting provisions, which should be compared with the VQC-125FJL specifications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
124.5x91x60mm Soft Jaws for VQC Vises - Vertex
Take advantage of soft, protective clamping and a precision fit for VQC-series vises, combined with compact dimensions for space-saving workshop integration. Benefit from stable handling owing to the component mass and order the replacement jaws directly via Metav Werkzeuge or consult the team for application advice. VQC-125FJ Soft Jaws — replacement jaws for VQC vises, precision fit by Vertex The VQC-125FJ is a set of soft jaws designed to protect workpiece surfaces while providing a reliable clamping interface for VQC-series bench vises. Soft protective jaw faces Precision fit for VQC vises Compact 124.5 x 91 x 60 mm form Mass 4.96 kg for stable clamping Secure clamping that protects finished surfaces The primary advantage of soft jaws lies in secure holding without surface damage. Designed for use with VQC-series bench vises, these jaw inserts provide a cushioned contact area that minimises marring on coated, polished or delicate workpieces. The geometry ensures a precision fit, so repeatability is improved and setup time is reduced. For applications where appearance and dimensional integrity matter, the protected contact surface helps maintain tolerance chains and reduces the need for rework. Compact design that integrates into existing workflows With external dimensions of 124.5 x 91 x 60 mm, these jaws occupy minimal bench space while maintaining full functionality. The low-profile form factor allows straightforward installation into VQC clamping systems and supports efficient handling in constrained setups. The comparatively substantial mass of 4.96 kg contributes to steady holding forces during light to medium machining and assembly tasks, improving process stability without demanding additional fixturing. Practical advantages for everyday workshop use These soft jaw inserts simplify handling of sensitive components and expand the range of parts that can be safely clamped in a standard vise. The solution is suited to precision workshops, small-batch production and service environments where repeatable protection is required. The simple, application-oriented design reduces adjustment time and, when paired with a consistent clamping routine, supports higher throughput and fewer rejects. Technical teams will value the compatibility with VQC vises and the predictability it brings to routine operations. Contact Metav Werkzeuge for tailored guidance on integrating Vertex soft jaws into existing clamping systems and secure procurement from our Emmerich distribution hub Technical Data Article number: VQC-125FJ GTIN: 4061905091360 ECLASS: 21029107 Manufacturer: Vertex Facts Dimensions: 124.5 x 91 x 60 mm Weight: 4.96 kg Special features Soft jaws For VQC vises FAQ Are these jaws compatible with all VQC-series vises? Compatibility is specified for VQC-series vises; the VQC-125FJ soft jaws are designed to match the clamping geometry of VQC bench vises for a precision fit. What workpiece surfaces are protected by these soft jaws? The soft jaw faces on the VQC-125FJ reduce marring on painted, plated or polished surfaces and are suitable where surface appearance and tolerances are critical. How does the mass of the jaws affect clamping performance? The 4.96 kg mass contributes to stable clamping and helps resist vibration during light machining, enhancing the holding reliability of the VQC-125FJ set. Can the VQC-125FJ be used in small or crowded workspaces? Yes, the compact dimensions of 124.5 x 91 x 60 mm make these jaws a space-efficient option for workshops with limited bench area. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
124mm MT3 Taper Arbor With B12 Shank, Hardened And Ground, DIN 238 - TECWERK
The combination of a Morse taper 3 (MK3) seating and a B12 drill‑chuck arbor, together with a fully hardened and ground finish and a compact overall length of 124 mm, delivers secure mounting and long service life for routine workshop tasks; order via Metav Werkzeuge or consult their technical advisors for specification matching. Taper arbor MK3×B12, hardened and ground – TECWERK A taper arbor MK3×B12 designed for secure mounting of drill chucks on drilling and turning machines, compliant with DIN 238 and finished for consistent concentricity MK3 taper to DIN 238 standard B12 arbor for drill‑chuck mounting Fully hardened and ground construction 124 mm overall length for stable clamping Secure mounting for reliable machining The MK3 taper conforms to DIN 238, providing a standardised interface that ensures repeatable seating and low run‑out when used with compatible drill chucks. By combining the MK3 taper with a B12 arbor bore, the component creates a direct mechanical link between spindle and chuck, improving precision in hole‑making operations. This results in reduced rework and steadier tool behaviour during both drilling and light turning tasks, a rational advantage for workshops that prioritise measurable process stability. Durability that reduces downtime Manufactured in a fully hardened and ground execution, the arbor resists wear at the critical contact surfaces and preserves concentricity over extended service. The hardened finish limits fretting and deformation under repeated mountings, while the ground surface promotes accurate seating. Taken together, these properties extend maintenance intervals and contribute to predictable tooling performance, supporting efficient production flows in industrial and trade environments. Compatibility and practical workshop use With an overall length of 124 mm, the arbor offers compact handling and easy incorporation into existing setups. The design accepts standard drill chucks and is suitable for installation in drilling machines and lathes equipped to receive a Morse taper 3 spindle. The adherence to DIN 238 guarantees interchangeability with other standardised tooling, simplifying procurement and inventory management for maintenance departments and small workshops alike. The straightforward mechanical nature of the arbor makes it a practical, reliable choice for routine chuck mounting tasks. For reliable chuck mounting choose the TECWERK taper arbor and order through Metav Werkzeuge for fast delivery and technical assistance; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832332NW Standard: DIN 238 Manufacturer: TECWERK Product type: Taper arbor Facts Overall length: 124 mm Taper: MK3 (Morse taper 3) Arbor bore: B12 Special features Drill‑chuck taper to DIN 238 Fully hardened and ground For acceptance of drill chucks on drilling and turning machines Execution: hardened and ground FAQ Which machines is the taper arbor suitable for? The taper arbor MK3×B12 is intended for use on drilling machines and lathes that accept a Morse taper 3 spindle and is designed to receive standard drill chucks for general workshop applications. How is the arbor mounted and secured? Mount the MK3 taper into the spindle taper; the B12 arbor bore accepts the drill‑chuck mounting. The precise fits and DIN 238 conformity ensure stable seating and minimised run‑out for the chuck assembly. What benefit does the hardened and ground finish provide? The fully hardened and ground surface increases wear resistance at seating and contact zones, preserving concentricity and extending the service life of the arbor under frequent use. Is the arbor suitable for precision drilling tasks? Yes, the arbor’s standardised MK3 taper and careful finishing deliver the concentricity and secure clamping required for precise hole‑making with standard drill chucks. Does the arbor meet international standards for interchangeability? Compliance with DIN 238 ensures compatibility with other tooling produced to the same standard, simplifying replacement and integration into existing tool inventories. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
124mm Reducer Sleeve MK4 to MK1 Hardened Ground, DIN 2185 - TECWERK
Benefit from a robust taper adapter that meets DIN 2185, is fully hardened and ground, and converts between standard Morse tapers for straightforward tool changes. Order the reducing sleeve directly via Metav Werkzeuge or contact our consultants for specification support. Reducing sleeve DIN 2185 MT4 to MT1 — hardened and ground (TECWERK) A Reducing sleeve DIN 2185 MT4 to MT1 designed to adapt tools with a Morse taper for stable, repeatable mounting in toolholders and arbors DIN 2185 standard compliance Fully hardened and ground MT4 to MT1 taper conversion Overall length 124 mm Precision engineering for reliable taper transfer The Reducing sleeve DIN 2185 MT4 to MT1 is manufactured to the DIN 2185 standard, delivering a controlled interface between holders and tools with Morse taper shanks. The combination of full hardening and internal/external ground surfaces supports consistent seating and reduces the risk of misalignment during clamping. This results in improved precision during machining set-ups and fewer reworks caused by poor fit. Durable finish that supports repeatable set-up A hardened substrate with ground bores and cones provides a robust contact surface that resists deformation under normal clamping loads. The finished surfaces aid concentricity and ensure repeatable positioning across multiple insertions of tooling, which streamlines workshop processes and reduces time spent on re‑alignment. The construction is optimised for routine industrial use where dependable mechanical behaviour is essential. Compatibility and practical workshop benefits Designed for converting an external MT4 to an internal MT1 taper, the adapter sleeve suits a variety of toolholders, arbors and fixtures that accept Morse-taper shanks. The 124 mm overall length gives adequate engagement depth for stable mounting, while the adherence to DIN 2185 simplifies specification matching in procurement and maintenance documentation. This adapter supports efficient tool changes and helps maintain organised tool inventories in busy workshops. Choose the TECWERK reducing sleeve for proven hardness and precision — contact Metav Werkzeuge for delivery or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000832355NW Product type: Reducing sleeve Standard: DIN 2185 External taper: MT4 Internal taper: MT1 Dimensions & numbers Overall length: 124 mm Packaging unit: 1 Materials & features Fully hardened Internal and external ground For tools with Morse taper Execution: hardened and ground FAQ Which taper sizes does the adapter convert? The adapter converts an external MT4 taper to an internal MT1 taper, compliant with DIN 2185. Is the sleeve suitable for precision toolholders? Yes, the TECWERK reducing sleeve is fully hardened and ground to support precision seating in toolholders. What is the overall length of the reducing sleeve? The overall length is 124 mm (SKU 2000832355NW), providing sufficient engagement for stable mounting. Does the product meet a recognised standard? The reducing sleeve is manufactured to DIN 2185, ensuring standardised dimensions and interchangeability. Can the sleeve be used for repeated tool changes in a busy workshop? The hardened and ground finish of the sleeve is designed for repeatable use, maintaining concentricity and reducing rework in regular workshop operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
124mm Reducer Sleeve MK4 to MK2 Hardened Ground DIN 2185 - TECWERK
Combining DIN 2185 conformity with a fully hardened and ground finish and a compact 124 mm overall length, this reducing sleeve delivers precise taper adaptation with low runout and long service life. Order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice. Reducing Sleeve DIN 2185 MK4→MK2, hardened and ground — TECWERK A Reducing Sleeve DIN 2185 MK4→MK2 for adapting tools with Morse taper, hardened and ground to ensure accurate seating and repeatable clamping. DIN 2185 standard compliance Hardened and ground inside/outside Adapts MT4 to MT2 Morse taper Precise taper adaptation for consistent machining results The Reducing Sleeve DIN 2185 MK4→MK2 is designed to provide high precision in tool holding by following the DIN 2185 specification. The inner and outer surfaces are hardened and ground, so the sleeve seats with minimal radial play and reduced runout. That improved concentricity is translated into more consistent cuts, fewer rejects and less rework. The functional geometry of the taper is retained by the finish process, which helps maintain accurate alignment between spindle and tool during operation. Versatile compatibility that simplifies workshop logistics This taper adapter enables straightforward Morse taper matching between an MT4 external spindle interface and an MT2 internal tool shank. The adapter's compatibility reduces the need for multiple specialised holders and shortens changeover times, helping to streamline production flows. For users less familiar with tapers: a Morse taper is a self-locking conical connection used to mount tools or arbors; this sleeve converts one Morse size to another while keeping the mechanical fit tight and reliable. Durability and repeatability for daily industrial use The combination of full hardening and precision grinding delivers enhanced durability and long-term repeatability, so the seating surfaces resist wear and preserve accuracy over many cycles. The adapter's overall length of 124 mm offers a balance of reach and rigidity, helping to stabilise mounted tools without unnecessary overhang. As a result, maintenance intervals can be extended and tool-runout checks will remain within expected tolerances for longer, supporting uninterrupted workshop performance. For dependable taper conversion choose the TECWERK reducing sleeve supplied via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for technical guidance and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000832356NW Label: Reduzierhülse DIN 2185 MK4xMK2 geh.u.geschl.TECWERK Manufacturer: TECWERK Facts Overall length: 124 mm Internal taper: MK2 External taper: MK4 Packaging unit: 1 Special features DIN 2185 Hardened and ground inside and outside For tools with Morse taper Execution: hardened and ground FAQ What does compliance with DIN 2185 mean for this adapter? Compliance with DIN 2185 means the adapter's taper dimensions and tolerances are manufactured to an established German standard, ensuring interchangeability and predictable seating characteristics for taper connections. Which taper sizes are connected by this sleeve? The sleeve connects an external MT4 interface to an internal MT2 shank, facilitating the use of MT2 tooling in MT4 spindles while maintaining the mechanical fit required for reliable machining. How does the hardened and ground finish improve performance? Hardened and ground surfaces reduce wear and preserve seating accuracy, which lowers runout and supports repeatable clamping; this increases the service life of both sleeve and mounted tools. Why is the overall length relevant for machining stability? The 124 mm overall length provides a compromise between reach and rigidity: sufficient length for many setups while limiting overhang that can amplify vibration and deflection during cutting. How is the product delivered and identified? The adapter is supplied as a single unit (packaging unit 1) and can be identified by article number 2000832356NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
124x78x52mm Axial Drive With Smooth Jaws For VNC-FV - Vertex
Take advantage of the combination of axial drive reliability, smooth jaws for low-mark clamping and compact dimensions to streamline fixture setups and protect delicate components; order the product directly via Metav Werkzeuge or consult our specialists for compatibility guidance. VNC-5AD Axial Drive with Smooth Jaws – Clamping Accessory by Vertex The VNC-5AD is an axial-drive clamping accessory designed to deliver consistent holding force and gentle contact for parts on compatible VNC-FV clamping systems. Axial drive for consistent clamping Smooth jaws minimise workpiece marking Compact size 124 x 78 x 52 mm Lightweight construction at 2.08 kg Precise clamping that supports repeatable production The axial drive mechanism provides a direct, linear clamping action that converts spindle movement into uniform holding force. This design reduces lateral play and supports repeatable positioning, which is especially valuable in series production and inspection tasks. By avoiding variable radial forces, the unit helps maintain process stability and reduces rework, delivering measurable efficiency gains in every shift. Gentle jaws to protect finished surfaces Equipped with smooth jaws, this clamping accessory is optimised for components where surface integrity matters. The jaw finish spreads contact pressure more evenly than serrated alternatives, thereby reducing marking on soft or pre-finished parts. For applications where cosmetic appearance or tight tolerances are critical, the smoother contact improves first-pass yield and lowers downstream corrective work. Compact footprint for flexible integration With dimensions of 124 x 78 x 52 mm and a weight of 2.08 kg, the unit occupies minimal space on fixtures and is suitable for retrofitting into existing clamping stations. The compact form factor simplifies machine integration and leaves room for additional tooling or sensors, enabling more flexible cell layouts without compromising stability. The accessory’s format supports quick changeovers and keeps the work envelope efficient. Confidence through proven supply and local expertise Supplied by Vertex, the component is intended for use with VNC-FV systems and follows established standards for clamping accessories. Working with Metav Werkzeuge brings the benefit of a European quality filter: extensive product range, dependable logistics from Emmerich and decades of precision experience. This combination ensures reliable availability and specialist advice when adapting the unit to specific workflows. Contact Metav Werkzeuge to confirm compatibility with existing VNC-FV equipment and to arrange supply of the Vertex VNC-5AD axial drive with smooth jaws; Metav’s consultants in Emmerich are available by email or phone for technical clarification. Technical data Article number: VNC-5AD GTIN: 4061905092657 Compatible with: VNC-FV eClass: 21130302 Facts Dimensions: 124 x 78 x 52 mm Weight: 2.08 kg Special features Axial drive Smooth jaws Manufacturer: Vertex FAQ Is the unit compatible with other clamping systems? The VNC-5AD is specified for use with VNC-FV systems; compatibility with other systems should be checked against mounting interfaces and clamping stroke requirements. Will the smooth jaws prevent part marking on delicate materials? Smooth jaws on the Vertex VNC-5AD reduce localised pressure peaks and help minimise surface marking on sensitive components compared with serrated alternatives. How does the axial drive improve repeatability? Axial-drive action provides direct linear clamping force, reducing lateral force variation and supporting repeatable positioning in cyclic production. What are the installation space requirements? The compact dimensions (124 x 78 x 52 mm) and a weight of 2.08 kg make the unit suitable for tight fixtures; check available clearance on the VNC-FV station prior to installation. Is the VNC-5AD ready to install or are additional parts required? The accessory is supplied as described; any adapter plates or mounting hardware required for a specific machine interface must be confirmed before ordering. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1250mm Independent Four-Jaw Chuck, 150 rpm, 8-M20 T-Slots - Vertex
High-capacity clamping, precise independent jaw control and rugged construction combine for consistent heavy-duty turning of large components; benefit from the Ø 1250 mm capacity, the rated 150 rpm operating speed and the substantial 905 kg mass for stable machining. Order the VKC-50 independent four-jaw chuck directly via Metav Werkzeuge or ask our consultants if needed VKC-50 Independent four-jaw chuck – Ø 1250 mm, 150 rpm – Vertex The VKC-50 independent four-jaw chuck is a heavy-duty workholding solution designed for large-diameter turning on industrial lathes Independent four-jaw design for exact centring Large Ø 1250 mm gripping capacity Rated speed 150 rpm for heavy work Robust build, approx 905 kg mass High-capacity workholding for large components The VKC-50 delivers a Ø 1250 mm clamping range that enables secure handling of substantial parts. Its mass of 905 kg contributes to inherent stability during turning, reducing vibration and improving surface finish; this stability is particularly important when machining large diameters where rigidity determines process reliability. The result is a workholding device that supports continuous production runs in heavy industries by providing the structural basis for repeatable machining operations. Accurate, independent clamping for irregular and complex parts Thanks to its independent four-jaw concept, each jaw can be set separately, which enables precise centring of asymmetrical or irregular workpieces. This flexibility reduces the need for special fixtures and simplifies the setup of one-off or batch runs requiring individual jaw adjustment. The independent jaw control supports high precision clamping, making the chuck suitable for tasks where concentricity and part geometry demand careful alignment rather than relying on a single fixed centre point. Engineered for reliable operation on industrial lathes Operational parameters such as the rated 150 rpm indicate suitability for heavy turning rather than high-speed applications, aligning the chuck with slow, high-torque machining operations. The T-nut 8-M20 mounting arrangement offers a standardised interface for secure attachment to a variety of spindle faces or adaptors, ensuring compatibility within robust turning setups. The combination of deliberate speed rating and substantial mass optimises torque transfer and reduces centrifugal effects, supporting safe, stable use in demanding environments. Workshop integration and productivity benefits In a production context, the chuck’s capacity and independent jaw control help to cut setup time for non-standard parts and to reduce reliance on specialised clamping fixtures, contributing to improved workflow efficiency. Specifying this workholding element supports a pragmatic approach to heavy machining: the robust construction minimises unplanned downtime and the standardised mounting eases integration into existing machine fleets. For buyers seeking a dependable partner in precision, Metav’s supply chain and quality filter for the European market ensure consistent delivery and technical guidance. Contact Metav Werkzeuge for tailored configuration advice on the Vertex VKC-50 independent four-jaw chuck and to request detailed technical documentation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VKC-50 GTIN: 4061905094903 Manufacturer: Vertex ECLASS: 21020490 Facts Diameter: 1250 mm Speed: 150 rpm Weight: 905 kg Special features Type: Independent four-jaw chuck Mounting: T-nut 8-M20 Designation: Vierbackenfutter (independent) FAQ What maximum workpiece diameter can be clamped with this chuck? The VKC-50 provides a clamping capacity of 1250 mm, suitable for large-diameter components used in heavy turning operations. Is the chuck suitable for irregular or non-cylindrical parts? Yes; the independent jaw arrangement of the Vertex VKC-50 allows each jaw to be adjusted separately, enabling precise centring of asymmetrical or irregular workpieces. What is the recommended operating speed for this workholding solution? The VKC-50 is rated for 150 rpm, which matches heavy-duty, high-torque turning processes rather than high-speed machining. How is the chuck mounted to the machine spindle? Mounting is via a T-nut 8-M20 arrangement, providing a secure and standardised interface for attachment to compatible spindle faces or adaptors. For which workshop applications is this chuck intended? This Vertex independent four-jaw chuck is intended for industrial lathe applications where large diameters, rigid clamping and precise jaw adjustment are required, such as heavy fabrication, rotor turning and large-part servicing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm 14mm T-Slot Screw M12 Grade 10.9 With Nut And Washer DIN 787 - AMF
Robust Grade 10.9 construction combined with an M12 metric thread and a 125 mm overall length ensures secure clamping in industrial machine tables; the bolt is supplied complete with nut and washer. Order this T‑slot fastening directly via Metav Werkzeuge or consult our advisers for application support. T-slot bolt DIN 787 – AMF | M12 thread, 14 mm T-slot, 125 mm overall length A T-slot bolt DIN 787 engineered for dependable fixture of workpieces and tooling in 14 mm T‑slot systems on machine tables and modular clamping equipment. High-strength grade 10.9 For 14 mm T-slot systems M12 metric thread Includes nut and washer Reliable clamping for demanding industrial applications This fastening solution delivers high tensile strength through its Grade 10.9 specification, making it suitable for repeated load cycles in production environments. Compliance with DIN 787 denotes its design for T‑slot use on machine tables and modular rigs; the profile engages the slot securely and resists rotation under tightening. The material and heat-treatment implied by the grade provide greater resistance to shear and tensile stress than standard bolts, which reduces the need for frequent replacements and supports continuous operation in workshops and production lines. Straightforward compatibility and quick installation Fitting is straightforward: the bolt is dimensioned for a 14 mm T‑slot, features an M12 thread and an overall length of 125 mm, and is supplied complete with a nut and washer for an immediate installation. The M12 metric thread enables the use of common torque settings and standard tooling, simplifying assembly and maintenance tasks. For technical enquiries about fitment, torque recommendations or slot geometry, Metav Werkzeuge offers direct support via email or telephone to assist with correct selection and safe use. Engineered quality and dependable supply chain Manufactured to the DIN standard under the AMF label, this T‑slot fastener reflects industrial production tolerances and traceability appropriate for professional workshops and OEM assembly. Packaged per unit for controlled release into assembly processes, the component supports a lean inventory strategy where reliability and predictable performance matter. Choosing components with clear standards and vendor backing helps maintain uptime and reduces the administrative overhead associated with non-conforming parts. Choose the AMF T‑slot bolt for secure, repeatable clamping and contact Metav Werkzeuge for precise product matching or purchasing from the Emmerich warehouse at Metav Werkzeuge; our consultants will advise on integration and supply logistics. Technical Data SKU: 4000833320NW Standard: DIN 787 Product: T-slot bolt Brand: AMF Label: T-slot bolt M12, 14 mm T-slot, L 125 mm, Grade 10.9, incl. nut and washer Key measurements T-slot width: 14 mm Thread: M12 Overall length: 125 mm Axite enrichment: A: 13.7; B: 75; E: 22; K: 8 Pack unit: 1 UID: 4000833320NW Special features Compliance with DIN 787 High-strength Grade 10.9 Includes nut and washer Designed for machine table T‑slot systems FAQ What T-slot width does this bolt require? The fastening is designed for a 14 mm T‑slot and engages securely when used in appropriately sized machine table slots. Which thread size is used on this T‑slot bolt? The product features an M12 metric thread suitable for standard tooling and torque settings. Does the delivery include fastening hardware? Yes, the T‑slot bolt is supplied with the matching nut and washer to allow immediate assembly. Is this component compliant with any standard? This AMF T‑slot bolt is specified to DIN 787, indicating its intended form and fit for T‑slot applications. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Clamp Screw M24x3P Heat-Treated Steel - Vertex
Benefit from robust heat-treated steel, a precise M24×3 thread and a 125 mm length for secure clamping and consistent fixture performance. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw – Vertex, M24×3 thread, 125 mm Clamping screw designed for secure fixture and workholding in industrial clamping technology, offering reliable engagement and durable construction. Heat-treated steel construction M24×3 thread for strong engagement 125 mm length for deep clamping Precision-made, SKU 1385M Durable design for reliable workholding The robust construction, manufactured from heat-treated steel, delivers long service life and resistance to deformation under repeated load. This results in fewer interruptions for maintenance and a lower need for replacement parts, supporting continuous production. The solid build also reduces micro-movements in fixtures, improving overall repeatability and contributing to stable tolerances in serial machining and assembly. Precision thread for consistent clamping force A standard M24×3 thread with defined pitch ensures positive engagement with mating nuts or threaded holes, providing consistent axial force when torqued. The metric coarse pitch is chosen for high-load clamping situations and simplified mating with common fixture components. The geometric accuracy of the thread reduces the risk of cross-threading and supports predictable torque-to-preload behaviour, which enhances setup reliability and process efficiency. Faster setups and fewer production interruptions With a 125 mm length and carefully controlled dimensions, integration into jigs, fixtures and workholding systems is straightforward, reducing setup time and helping to maintain cycle-time targets. The component’s weight and profile are optimised for handling and installation, while the precise manufacture minimises the need for rework. Sourcing through Metav Werkzeuge provides access to a quality filter and dependable logistics, supporting steady supply to the workshop bench. Contact Metav Werkzeuge in Emmerich for procurement or technical advice on the clamping screw and complementary workholding components; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1385M GTIN: 4061905090264 Facts Weight: 0.35 kg Length: 125 mm Thread: M24x3P Special features Material: Heat-treated steel Manufacturer: Vertex FAQ What are the thread and overall length of this clamping screw? The clamping screw features a metric M24×3 thread and an overall length of 125 mm, suitable for deep clamping applications. What material is the component made from and why does it matter? The item is made from heat-treated steel, providing enhanced strength and wear resistance; this improves durability under repeated clamping cycles for Vertex clamping screws. Is the clamping screw suitable for standard fixture assemblies? Yes, the geometric accuracy and the M24×3 thread make the part compatible with standard nuts and tapped holes commonly used in jigs and fixtures. How does the clamping screw support repeatable setups? Precision machining of the thread and controlled length ensure consistent engagement and preload, which helps maintain repeatable clamping force across assemblies using the Vertex clamping screw (SKU 1385M). How is the product identified for ordering and inventory? Identification is by SKU 1385M and GTIN 4061905090264, both shown here for clear ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Clamp Screw M8x1.25 Thread, Heat-Treated Steel - Vertex
Take advantage of M8 x 1.25 thread accuracy and a heat-treated steel body to secure fixtures with consistent clamping force; combine that with the compact 125 mm length for deep or confined assemblies. Order directly via Metav Werkzeuge or consult our specialists for tailored advice and dependable European supply. Clamping screw 1325M – M8 x 1.25 thread, 125 mm, Vertex The Clamping screw 1325M is a metric clamping fastener designed for secure fixture applications where repeatable positioning and compact dimensions are required M8 x 1.25 metric thread precision 125 mm overall length for deep reach Heat-treated steel for high durability Lightweight at 0.04 kg for easy handling Consistent clamping where it matters The metric M8 x 1.25 thread provides a familiar standard for industrial fixtures and tooling, enabling reliable engagement with nuts and threaded holes. Accurate thread geometry reduces play and ensures precision when tightening, which translates into repeatable clamping forces and fewer re-adjustments during set-up. For workshops and small production lines this means faster fixture changes and less downtime, supporting a smoother workflow and higher throughput. Durable construction for long service life Manufactured from heat-treated steel, the component resists deformation under load and maintains its mechanical properties through repeated use. Heat treatment increases fatigue strength, so the screw retains clamping integrity over many cycles. The combination of a robust material and metric thread standards supports applications where longevity and resistance to wear are critical, offering a practical balance between toughness and machinability. Compact dimensions that improve accessibility With an overall length of 125 mm and a mass of roughly 0.04 kg, the fastener is suitable for confined spaces and multi-component assemblies where longer bolts would be impractical. The compact profile enables secure fixing within tight fixture layouts while keeping handled weight low for manual assembly tasks. Reduced mass also contributes to easier inventory handling and faster assembly operations. Specified for dependable sourcing and integration The SKU is supplied by Vertex and identified for procurement and traceability in industrial supply chains. As a standard metric clamping element, it integrates smoothly into jigs, fixtures and modular tooling systems that rely on consistent thread forms and dimensions. Procurement via a reliable distributor ensures steady availability and a transparent supply chain, supporting stable production planning. For reliable stock of Vertex clamping screws and expert advice on integrating the 1325M into production, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 1325M GTIN: 4061905090431 ECLASS: 21022190 Facts Length: 125 mm Thread: M8 x 1.25 Weight: 0.04 kg Special features Material: Heat-treated steel Compact metric clamping screw design Manufacturer: Vertex FAQ What thread form does the clamping screw use? The Vertex clamping screw (SKU 1325M) uses an M8 x 1.25 metric thread suitable for standard M8 fittings and threaded holes. What material is the fastener made from? The fastener is made of heat-treated steel, which improves strength and fatigue resistance for repeated clamping use. What is the overall length and mass of the part? The overall length is 125 mm and the weight is approximately 0.04 kg for the Vertex 1325M. Is the product identified for procurement and traceability? Yes, the part is listed with GTIN 4061905090431 and SKU 1325M for clear identification in ordering and inventory systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Clamping Iron For T-Slot 16+18mm, Suitable For M16/M18 - AMF
Take advantage of a robust T‑slot clamping solution that meets DIN 6314 standards and fits 16 + 18 mm T‑slots; the compact 125 mm length and 18 mm width enable precise, repeatable fixturing. Order directly via Metav Werkzeuge or consult the team for tailored mounting advice. AMF T-slot Clamping Bar (DIN 6314) — 125 mm for 16 + 18 mm T‑slots A AMF T-slot Clamping Bar (DIN 6314) for secure and repeatable workpiece clamping on machine tables with 16 mm and 18 mm T‑slots. DIN 6314 conformity for reliable compatibility Fits 16 + 18 mm T‑slots for universal clamping 125 mm overall length for compact setups Suitable for M16 and M18 fixation Secure, standardised clamping that reduces setup variance The DIN 6314 specification ensures a standardised interface between the clamping element and machine table, delivering consistent contact geometry and predictable clamping behaviour. With a compact 125 mm overall length and 18 mm nominal width, this clamping bar is designed to stabilise short to medium workpieces where a small footprint is required. The standard compliance simplifies fixture planning and reduces the need for bespoke adaptors, which in turn lowers setup time and increases repeatability on production or jobbing machines. Efficient integration with existing fixturing and bolts Compatibility with 16 + 18 mm T‑slots and thread sizes M16 / M18 enables direct use with common T‑slot bolts and clamping hardware, avoiding additional conversion parts. The geometry supports secure force transfer to the workpiece, helping to maintain machining accuracy under typical cutting loads. For operations that demand quick changeovers, the compact form factor allows fast repositioning, leading to improved throughput and fewer machine idle minutes while preserving machining stability. Compact design for versatile workshop use and predictable handling The clamping bar’s dimensions and adherence to DIN enable easy storage, handling and replacement planning within a standard workshop environment. Supplied in a single unit, the component is suitable for supplementing existing clamping kits or for targeted applications where a short, robust clamping element is required. Traceable identification via SKU and conformity markings supports inventory control and maintenance scheduling, ensuring consistent availability and diminished risk of mismatched parts. For tailored advice on integrating this DIN 6314 clamping bar into existing fixtures, contact Metav Werkzeuge for product guidance and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833005NW Standard: DIN 6314 Product type: T‑slot clamping bar Brand: AMF Facts Overall length: 125 mm Nominal width: 18 mm T‑slot compatibility: 16 + 18 mm Suitable for: M16, M18 fixation Packaging unit: 1 Special features Conforms to DIN 6314 Compact design for small fixtures Traceable SKU for inventory control Intended for machine table clamping applications FAQ What table slots does this clamping bar fit? The clamping bar is designed for 16 + 18 mm T‑slots, making it suitable for machine tables and fixtures that accept these standard slot widths. Which bolt sizes are compatible with this AMF clamping bar? Compatibility is stated for M16 and M18 fixation, allowing use with common T‑slot bolts and clamping hardware. What is the overall length and width of the clamping element? The component measures 125 mm in overall length with a nominal width of 18 mm, optimised for compact clamping arrangements. Does the product adhere to an industry standard? Yes — the clamping bar conforms to DIN 6314, ensuring standardised geometry and predictable interfacing with machine tables. How is the item supplied and identified? The item is supplied as a single unit and is listed under SKU 4000833005NW for inventory and ordering purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Clamping Screw For Heat-Treated Steel, M12x1.75P - Vertex
Take advantage of robust heat-treated steel, a standard M12×1.75 thread and a 125 mm overall length to secure reliable clamping and simplified inventory management. Order via Metav Werkzeuge for consistent supply or request technical guidance from the Metav consultants. Clamping screw 1345M — M12×1.75 thread, 125 mm length (Vertex) Clamping screw 1345M is a straightforward fastening solution for workshop and industrial clamping tasks, designed to provide long service life and dependable fixation in assembly and fixturing applications. Heat-treated steel for long service life M12×1.75 thread for standard compatibility 125 mm length for extended reach Lightweight 0.09 kg for easy handling Durable material and engineered geometry for secure clamping The use of heat-treated steel ensures increased hardness and improved resistance to wear compared with untreated alternatives, making the fastener suitable for repeated engagement in production environments. The engineered geometry of the shank and head supports consistent contact and clamping precision, reducing the risk of loosening under vibration. For procurement and maintenance planning, the combination of material quality and simple design minimises replacement frequency and supports predictable lifecycle costs. Standardised thread and dimensions for seamless workshop integration A genuine M12×1.75 thread provides compatibility with a broad range of nuts, threaded inserts and components commonly stocked in industrial supply chains, which reduces the need for special adaptors. The 125 mm overall length increases reach for assemblies with deeper clamp paths or thicker workpieces and helps avoid unnecessary modifications to existing tooling. Together, these standardised dimensions streamline stock management and enable quick retrofits in jigs and fixtures, enhancing operational efficiency. Practical handling and reliable supply for everyday operations At only 0.09 kg, the fastener combines sufficient mass for robust clamping with low weight for ease of handling during repetitive assembly tasks, shortening cycle times at assembly stations. The uncomplicated design supports straightforward inspection and replacement routines, while the Vertex origin underlines consistent manufacturing standards. For projects that demand predictable delivery and quality control, the availability through Metav Werkzeuge further strengthens supply-chain reliability and reduces procurement complexity. Contact Metav Werkzeuge for tailored quantities or technical advice on clamping solutions — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and lead times. Technical data Article number: 1345M GTIN: 4061905089237 Facts Length: 125 mm Thread: M12×1.75 Weight: 0.09 kg Special features Heat-treated steel Clamping screw Brand: Vertex FAQ What thread standard does this fastener use? The clamping screw 1345M is manufactured with an M12×1.75 thread, ensuring compatibility with standard M12 nuts and threaded components. What is the overall length of the fastener? The overall length is 125 mm, which provides additional reach for deeper clamping applications. What material is the fastener made from? This fastener is made from heat-treated steel, chosen for enhanced hardness and wear resistance suited to repetitive use. Is the fastener lightweight enough for manual assembly? Yes, at 0.09 kg the clamping screw 1345M offers low weight for comfortable handling during manual assembly while maintaining robust clamping capability. Can this clamp screw be integrated into existing jigs and fixtures? The standardised M12×1.75 thread and common length make integration straightforward; the fastener is suitable for retrofitting into existing fixtures without special adapters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com