Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
125mm Clamping Screw M10x1.5P, Hardened Steel - Vertex
Take advantage of the combination of heat-treated steel, a standard M10×1.5 thread and a compact 125 mm length for reliable clamping performance in production and workshop settings. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Clamping screw 1335M – M10×1.5 thread, 125 mm, Vertex The Clamping screw 1335M provides secure workpiece fixation for general clamping applications and light-to-medium assembly tasks Heat-treated steel for enhanced durability M10×1.5 thread for standardised mounting 125 mm overall length for extended reach Precision-manufactured Vertex component Reliable fixation for consistent production flow The clamping bolt delivers consistent clamping force thanks to its standard M10×1.5 metric thread combined with a precisely controlled shank length of 125 mm, allowing stable engagement in common clamping fixtures. This geometry reduces set-up time in repetitive operations and supports predictable clamping behaviour, which in turn contributes to improved throughput. The use of heat-treated steel increases wear resistance and maintains clamping integrity under cyclical loads, providing an efficient solution for workshop and industrial environments where repeatability matters. Minimal maintenance and long service intervals Made from heat-treated steel, the fastener requires little upkeep in standard operating conditions. The material choice minimises deformation under load and resists surface fatigue, extending replacement intervals and reducing unplanned downtime. The part’s compact mass of 0.06 kg makes handling straightforward while the standardised thread means replacement components are readily available, simplifying inventory management in maintenance and production departments. Compatibility with established metric systems The M10×1.5 thread conforms to widely used metric standards, ensuring compatibility with common clamping plates, threaded holes and accessories. This standardisation reduces the need for custom adaptors and supports flexible toolholding strategies across multiple machines. Precision manufacturing tolerances ensure smooth engagement and a secure fit, which helps to avoid misalignment and slippage during machining or assembly operations. Built for workshop practicality and traceability As a Vertex-manufactured component, this clamping screw combines simple geometry with robust material treatment to deliver a dependable fastening element. Traceability is supported by the clear SKU 1335M and GTIN record, facilitating stock control and reordering. Where precision and dependable fixation are priorities, this fastener functions as a practical, cost-effective component within broader clamping systems. For procurement or technical advice on Vertex clamping components contact Metav Werkzeuge — our consultants provide product guidance and compatibility checks from Emmerich, ensuring a reliable supply chain for precision workshop needs Technical Data Article number: 1335M GTIN: 4061905094408 Manufacturer: Vertex Facts Length: 125 mm Weight: 0.06 kg Thread: M10×1.5 pitch Special features Material: heat-treated steel Precision-made for clamping applications Standard metric thread for broad compatibility Vertex production quality FAQ What material is the clamping screw made from? The clamping screw 1335M is manufactured from heat-treated steel, offering increased wear resistance and durability for repeated clamping cycles. Which thread specification does the fastener use? The fastener uses a M10×1.5 metric thread, making it compatible with standard clamping plates and threaded fixtures common in industrial setups. Is the length suitable for deep clamping applications? With an overall length of 125 mm, this clamping bolt is designed to reach deeper engagement points while maintaining secure fixation in many workshop and assembly configurations. How is stock and reordering handled? The component is listed under SKU 1335M and GTIN 4061905094408 to facilitate inventory tracking and straightforward reordering through Metav Werkzeuge. Can this component be used in high-cycle production environments? Yes. The heat-treated material and precision manufacture of the clamping screw make it suitable for high-cycle applications where consistent clamping performance is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Clamping Screw M14x2P, Heat-Treated Steel - Vertex
Take advantage of a robust combination of heat‑treated steel construction and a standard M14x2P thread for reliable, repeatable clamping. The solid design and 125 mm length ensure secure engagement and long service life. Order the part or consult Metav Werkzeuge for specification support. Clamping screw 1345MA — M14x2P thread, heat‑treated steel (Vertex) A heavy‑duty clamping screw in heat‑treated steel, designed for secure fixturing and industrial workshop applications where consistent holding force and material resilience are required Robust heat-treated steel construction Standard M14x2P thread for secure mounting 125 mm overall length for deep engagement Precision-made for consistent clamping force Consistent clamping for reliable production flow The clamping screw provides a predictable clamping action thanks to its standardised M14x2P thread and controlled geometry. In production environments where repeatable setups matter, the combination of thread specification and 125 mm overall length reduces adjustment time and contributes to steady cycle times. The part’s measured mass of 0.13 kg supports precise load calculations during fixture design, enabling planners to balance clamping forces without guesswork. Durable construction that reduces maintenance interventions Constructed from heat‑treated steel, the component resists deformation under sustained load and keeps tolerances longer than untreated alternatives. The material treatment increases fatigue resistance and wear performance, which translates into fewer replacements and lower downtime across repetitive tasks. The Vertex origin and the coded article reference (1345MA) indicate consistent manufacturing traceability and batch-to-batch uniformity for quality‑oriented workshops. Easy specification and integration into existing setups The standardised thread pitch and nominal diameter align with common clamping fixtures, simplifying retrofit and new installations. Technical planners can use the clear numeric data — M14x2P, 125 mm, 0.13 kg — directly in CAD models and fixture lists without conversion. Where a metric thread standard is required, this component fits established tooling patterns, enabling fast procurement and reliable interchangeability within typical industrial clamping systems. Contact Metav Werkzeuge in Emmerich for application advice or to request compatibility checks with existing fixtures — direct support is available by email or phone and procurement can be arranged from stock Technical Data Article number: 1345MA GTIN: 4061905091537 Manufacturer: Vertex Facts Thread: M14x2P Length: 125 mm Weight: 0.13 kg Special features Material: Heat‑treated steel Product type: Clamping screw eClass: 21022190 FAQ What materials is this clamping screw made from? The clamping screw is manufactured from heat‑treated steel, offering higher wear resistance and improved fatigue performance compared with untreated steel. Is the thread compatible with standard metric fixtures? Yes, the M14x2P thread conforms to common metric thread standards and is suitable for integration with typical clamping hardware and fixtures. How long is the part and what is its mass? The overall length is 125 mm and the mass is 0.13 kg, values provided for fixture design and load calculations. Can the Vertex 1345MA be traced to a production batch? Yes, the item is listed under the article number 1345MA and GTIN 4061905091537, which supports traceability and quality control procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Clamping Screw M16x2P Heat-Treated Steel Length 125mm - Vertex
The combination of heat‑treated steel construction, a precise M16×2 thread and a 125 mm overall length ensures stable, reproducible clamping in fixture work; order the clamping screw directly via Metav Werkzeuge or contact the consultants for application advice. Vertex 1355M clamping screw — M16×2 thread, 125 mm length The Vertex 1355M clamping screw is a robust fastening component designed for workshop fixtures and industrial clamping applications, delivering reliable retention and consistent repeatability. Heat-treated steel construction M16×2 fine thread 125 mm overall length Precisely machined for secure clamping Consistent clamping force for repeatable setups A threaded clamping solution with a M16×2 thread and accurately turned shank provides dependable axial force across repeated cycles. The defined thread profile converts applied torque into predictable clamping pressure, which reduces variability between setups and supports process stability. This level of mechanical consistency is particularly valuable in jigs, toolholding and assembly fixtures where reproducibility is essential for quality control. Long service life from heat‑treated construction Manufactured from heat‑treated steel, the component combines strength with enhanced wear resistance. The thermal treatment increases hardness and fatigue endurance, so the screw sustains repeated loading without premature deformation. In environments with frequent assembly and disassembly, this material choice extends component life and lowers the frequency of replacements, contributing to reduced downtime and lower life‑cycle costs. Seamless integration into existing fixtures and jigs With an overall length of 125 mm and standard thread size, the part easily mates with common nuts, threaded inserts and clamping elements used across workshops. The geometrical compatibility enables straightforward retrofitting into existing fixtures without redesign, simplifying inventory management and ensuring that machine‑side adjustments remain minimal. The result is quicker changeovers and more efficient use of bench and machine time. Precision machining reduces setup time Careful machining and dimensional control minimise play and misalignment in assemblies. A precisely produced thread and shank reduce the risk of cross‑threading and enable smooth engagement, which shortens component replacement and tool setup times. Where repeat accuracy matters, engineered tolerances help to maintain positional stability under load, enabling faster inspection cycles and fewer corrective actions. Suited to workshop and industrial demands Compact and purposeful, the component balances weight and robustness; at around 0.16 kg, it is easy to handle while still providing solid mechanical performance. The combination of standard interface and durable construction makes it appropriate for small workshops as well as larger industrial operations that require dependable clamping hardware for fixtures, presses and assembly stations. For technical specification or supply enquiries regarding the Vertex 1355M clamping screw, contact Metav Werkzeuge in Emmerich for informed advice and secure delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 1355M GTIN: 4061905094453 Manufacturer: Vertex Core specifications Thread: M16×2 Length: 125 mm Weight: 0.16 kg Features Heat‑treated steel Precision‑machined thread Designed for fixture and clamping use FAQ What material is the clamping screw made from? The Vertex 1355M clamping screw is made from heat‑treated steel, chosen for enhanced hardness and wear resistance. Which thread size does the screw use and is it standard? The component features a M16×2 thread, a common metric size suitable for standard nuts and inserts. What is the overall length of the screw? The overall length is 125 mm, which facilitates integration into typical fixtures and jigs. Is the screw suitable for repeated assembly and disassembly? Yes, the heat treatment and precision machining of the Vertex 1355M make it well suited to frequent use with minimal wear. How much does one clamping screw weigh? A single unit weighs approximately 0.16 kg, balancing handling convenience with mechanical robustness. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Clamping Screw M20x2.5P, Heat-Treated Steel 125mm Length - Vertex
Benefit from a combination of heat-treated steel durability and a precise M20 x 2.5 thread for secure fixture retention and long service intervals; the 125 mm length allows deep engagement in demanding clamping setups. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw 1375M by Vertex — Heat-treated steel, M20 x 2.5 thread A clamping screw 1375M engineered for secure fixture and toolholding in industrial clamping systems and maintenance applications. Heat-treated steel for high wear resistance Metric thread M20 x 2.5 pitch 125 mm overall length for deep engagement 0.25 kg mass for predictable handling Engineered for repeatable clamping and component security The fastening geometry is designed to deliver consistent clamping with every installation. Constructed from heat-treated steel, the fastener resists deformation and preserves thread integrity under repeated torqueing, which reduces downtime for replacements. The M20 x 2.5 thread is a standard metric specification that ensures compatibility with common industrial fixtures and nuts; the coarse pitch helps convert torque into reliable axial force for secure holding in tooling plates and workholding assemblies. Simple integration into existing systems with clear mechanical benefits With an overall length of 125 mm, the fastener provides sufficient engagement for deep-seated connections while maintaining manageable installation effort. The defined mass of 0.25 kg contributes to predictable handling and balanced assembly processes, important in automated or manual fixture routines. The metric thread form and robust material choice simplify procurement and maintenance planning, supporting efficient inventory control and reduced machine stoppages through fewer fastener-related failures. Support for productive workflows and long-term reliability Selecting a component manufactured by Vertex delivers practical benefits in everyday shop-floor scenarios: fewer replacements, steady clamping performance and compatibility with standard metric accessories. The combination of wear resistance and precise thread dimensions contributes to lower life-cycle costs and steadier process outcomes, which supports lean production goals. Metav Werkzeuge acts as a local quality filter for the European market, offering a dependable supply chain and expert advice for integrating these fasteners into larger assemblies. For ordering advice, availability or specification checks for the Vertex clamping screw 1375M, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: 1375M GTIN: 4061905094484 Manufacturer: Vertex Facts Length: 125 mm Weight: 0.25 kg Thread: M20 x 2.5 pitch Special features Material: Heat-treated steel Product type: Clamping screw ECLASS: 21022190 FAQ What is the thread specification of this fastener? The clamping screw 1375M uses a metric M20 x 2.5 thread suitable for standard industrial fixtures and nuts. How long is the clamping screw and what does that mean for installation? The overall length is 125 mm, providing deeper engagement for secure connections in tooling plates or stacked fixture setups. What material is used and how does it affect service life? Manufactured from heat-treated steel, the 1375M offers improved wear resistance and reduced risk of thread deformation under repeated assembly cycles. Is this component suitable for repeat use in production fixtures? Yes, the combination of robust material and standard metric thread makes the Vertex clamping screw 1375M appropriate for repeated use in production and maintenance environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Clamping Wedge T‑Slot 12/14/16mm For M12 M14, DIN 6316 - AMF
Reliable, standard-compliant clamping for T-slots 12, 14 and 16 mm combined with compatibility for M12 and M14 fastenings supports predictable set-up and secure holding in common clamping systems. Order the component directly via Metav Werkzeuge or consult Metav's specialists for matching parts and delivery options. Clamping wedge DIN 6316 (AMF) — for T-slots 12 / 14 / 16 mm, 125 mm length A Clamping wedge DIN 6316 intended for securing fixtures and workpieces in standard T-slots, suited to M12 and M14 fastenings. Standard DIN 6316 compliance Fits T-slots 12 / 14 / 16 mm Length 125 mm for deep engagement Compatible with M12 and M14 fixtures Consistent fit with standard T-slot systems The DIN 6316 designation guarantees a familiar interface with common clamping rails and tables, simplifying procurement and replacement planning. Designed for T-slots 12 / 14 / 16 mm, the component provides a standardised mating geometry that reduces variation between suppliers. For workshops that rely on repeatable fixtures, this results in fewer adjustments during set-up and a predictable clamping envelope that integrates with existing tooling. Secure hold that shortens set-up time By combining a compact profile with a 125 mm engagement length, the wedge delivers stable contact across the slot, improving clamp stability under lateral loads. The component’s compatibility with M12 and M14 fastenings means common bolts and studs can be used without special adaptors, enabling faster assembly and fewer inventory items. The result is reduced machine downtime and more efficient batch changes on the shop floor. Predictable procurement through norm conformity Conformity to DIN 6316 is a practical advantage for purchasing and maintenance: the specification describes geometric and functional expectations, so replacements and spare parts remain interoperable. For purchasing departments, this lowers the risk of mis-matching components and supports a leaner spare-part inventory. Documentation and parts lists benefit from the norm reference when planning long-term toolroom supplies. Practical workshop considerations and applications The compact design and standardised dimensions make the element suitable for a wide range of clamping tasks in general workshop and industrial settings where T-slot tables are used. The simple geometry supports straightforward cleaning and inspection during maintenance cycles. For customised clamping assemblies, the wedge functions as a reliable basic element that pairs with standard bolts and clamp bars to build robust fixture systems. For supply enquiries or assistance selecting compatible fixtures for the AMF clamping wedge, contact Metav Werkzeuge for tailored advice and reliable delivery from Emmerich Technical Data Article number: 4000833058NW Standard: DIN 6316 Designation: Clamping wedge for T-slots (Spanneisen), AMF SKU / UID: 4000833058NW Facts T-slot compatibility: 12, 14, 16 mm Width: 14 mm Total length: 125 mm Suitable for: M12, M14 Packaging unit: 1 Enrichment codes: Addition: A: 20; B2: 40; B3: 20; C: 16; E1: 44; E2: 40 Special features Conforms to DIN 6316 Designed for standard clamping systems Intended for workshop and industrial fixtures Brand: AMF FAQ What T-slot sizes does the clamping wedge support? The clamping wedge supports T-slots of 12, 14 and 16 mm, matching standard machining table profiles. Which bolt sizes are compatible with this clamping element? Compatible bolt sizes are M12 and M14, enabling use with common clamping hardware. How long is the component and what does that mean for clamping stability? The element has a total length of 125 mm, which provides extended engagement in the slot for improved lateral stability during machining. Is the product standardised and easy to replace with equivalents? Yes; the item conforms to DIN 6316, which makes it straightforward to find equivalent parts with compatible geometry and function. What is the SKU for ordering or reference? The SKU / UID for ordering is 4000833058NW (AMF clamping wedge). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Fork Clamp Bar 14mm Slot For M12 M14 Clamping Screw, DIN 6315B - AMF
Take advantage of the DIN 6315B conformity and fork-style reliability for consistent, repeatable clamping. The 14 mm slot and 125 mm overall length provide secure seating and extended reach for standard clamping screws. Order the fork clamping wedge directly via Metav Werkzeuge or ask our consultants if needed. AMF Fork clamping wedge DIN 6315B (slot 14 mm, L 125 mm) The AMF fork clamping wedge DIN 6315B is a fork-design clamping wedge for workshop fixtures and vices, engineered to accept standard M12 and M14 clamping screws. DIN 6315B compliant fork design Compatible with clamping screws M12 and M14 14 mm slot width for secure seating 125 mm overall length for versatile clamping Stable fork design for predictable clamping results The fork-style construction delivers a consistent contact geometry that reduces lateral movement during tightening. Conformity with DIN 6315B means the part matches common fixture interfaces, helping to maintain repeatability across setups. The design focuses on straightforward mechanical function: fork engagement, screw tensioning and positive seating — all translated into reliable clamp behaviour in production environments. This section emphasises the measurable benefit of repeatable positioning and reduced rework. Compatibility with standard clamping screws and fixtures Specified for M12 and M14 clamping screws, the component integrates with widely used clamping hardware, simplifying parts procurement and replacement cycles. The 14 mm slot allows secure seating of the mating screw head or bolt, reducing the need for additional adaptors. For workshops standardising on metric screw sizes, this compatibility supports inventory rationalisation and faster changeovers between jobs. Practical dimensions that aid handling and reach The 125 mm overall length increases usable reach and offers added leverage when securing workpieces, especially in deeper or more crowded fixture assemblies. The compact yet extended format reduces the need for auxiliary extensions while preserving clearance for adjacent components. The item is identified as SKU 4000833023NW for ordering and stock reference; this simplifies reordering and traceability within procurement systems. For reliable fork-style clamping from AMF, contact Metav Werkzeuge in Emmerich for technical advice and fast fulfilment by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 4000833023NW SKU / UID: 4000833023NW Product type: Clamping wedge Design: Fork design Standard: DIN 6315B Brand: AMF Packaging unit: 1 Facts Slot width: 14 mm Overall length: 125 mm Suitable for clamping screws: M12, M14 Axite enrichment: A: 25; B2: 38; B3: 12; B4: 6 Packaging unit: 1 Special features DIN 6315B conformity Fork-style clamping wedge For clamping screw M12 / M14 Workshop-ready geometry for fixtures Identified as SKU 4000833023NW FAQ Which clamping screws are compatible with the AMF fork clamping wedge? The AMF fork clamping wedge is designed for M12 and M14 clamping screws, providing a standard interface for common workshop hardware. Does this component fit fixtures built to DIN 6315B? Yes, the AMF fork clamping wedge complies with DIN 6315B, enabling it to mate with fixtures and fixtures components manufactured to that standard. What are the principal dimensions to verify before ordering? Key measurements are a 14 mm slot width and a 125 mm overall length; these determine seating compatibility and reach in the fixture assembly. Is the AMF fork clamping wedge suitable for use in tight assemblies? The fork geometry and 125 mm length are intended to increase reach while preserving clearance; however, final suitability depends on the specific fixture layout and clearance requirements — verify dimensions against the assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Hydraulic Machine Vice Modular 30 kN Clamping Force, Cast Iron - Vertex
Take advantage of a robust, cast-iron construction combined with a 30 kN clamping force and 0.01 mm repeatability for reliable, high-precision workholding; order the hydraulic machine vice directly via Metav Werkzeuge or contact our consultants for configuration support. VNC-125FV Hydraulic Machine Vice — 30 kN clamping force, 0.01 mm accuracy (Vertex) A hydraulic machine vice, the VNC-125FV, designed for precision clamping in milling and machining operations across versatile fixture setups. 30 kN clamping force for secure workholding 0.01 mm repeatability for high-precision machining Modular design for flexible fixture configurations Cast iron body for damping and long-term stability Consistent precision that keeps production on track The vice delivers 0.01 mm repeatability, a level of precision that supports tight tolerances and reduces rework. With a sustained 30 kN clamping force the unit ensures workpieces remain stable during heavy cuts, which directly contributes to improved surface finish and longer tool life. The mechanism is engineered for minimal backlash so setup times are shortened; the result is a measurable increase in throughput and a reduction in scrap rates for small- to medium-batch machining. Modular system for flexible fixturing and fast changeovers A modular concept enables simple adaptation to different tasks: the vice accepts jaw configurations with 125 x 180 mm or 125 x 250 mm footprint options, allowing a single workholding platform to cover varied part geometries. This flexibility reduces the need for multiple dedicated fixtures and streamlines component handling on the machine table. The modular approach also aids inventory management by concentrating compatible accessories around one core unit. Robust construction that stabilises machining and lowers maintenance Built from cast iron, the vice’s mass and damping characteristics counteract chatter and vibration during aggressive cutting, supporting consistent machining results. The unit’s overall mass of 37 kg and a mounting height of 126 mm provide a stable centre of gravity for secure clamping; the choice of materials and hydraulic actuation reduces wear on mechanical linkages and cuts routine maintenance intervals. These design choices contribute to steady production with limited intervention. Contact Metav Werkzeuge in Emmerich for specification advice on the Vertex VNC-125FV hydraulic vice and to arrange delivery from our German stock: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: VNC-125FV GTIN: 4061905090721 Manufacturer: Vertex Facts Clamping force: 30 kN Accuracy / repeatability: 0.01 mm Weight: 37 kg Height: 126 mm Dimensions: 125 x 180 mm; 125 x 250 mm Special features Material: Cast iron Type: Hydraulic Modular design eClass: 21020601 ETIM: EC002173 FAQ What clamping force does the vice provide? The vice delivers a clamping force of 30 kN, giving secure workholding for demanding milling operations with the Vertex VNC-125FV hydraulic vice. How precise is the workholding? Repeatability is specified at 0.01 mm, enabling stable, high-precision results for components requiring tight tolerances. Which jaw widths are available for fixturing? The unit supports configurations with 125 x 180 mm and 125 x 250 mm footprints, allowing flexible adaptation to part sizes. What materials are suitable for machining with this vice? The vice’s robust cast-iron construction is suitable for typical metalworking applications; its stability benefits operations on steels, aluminium and similar workpiece materials when paired with appropriate cutting parameters. How heavy is the vice and what is the mounting height? The vice weighs 37 kg and has a mounting height of 126 mm, providing a stable base for machining and improved vibration damping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Independent Four-Jaw Lathe Chuck, 4Ă—M8 T-Slots, 1900 RPM - Vertex
Take advantage of the independent jaw operation, 125 mm nominal diameter and a 1,900 r.p.m. rating for reliable machining of non-cylindrical and uneven parts; order the component directly via Metav Werkzeuge or consult our advisors for fitment and mounting details. Vertex VKC-5 Independent Four-Jaw Chuck — 125 mm, 1,900 r.p.m. A Vertex VKC-5 independent four-jaw chuck designed for secure, adjustable clamping of irregular, square or asymmetrical workpieces on lathes and turning centres Independent four-jaw operation 125 mm nominal diameter Rated speed 1,900 r.p.m. T-slots 4 × M8 Precise, adaptable clamping for diverse workpieces The independently adjustable jaws deliver flexibility when handling off-centre or non-circular stock. By setting each jaw separately, the clamping device allows controlled positioning of the workpiece for turning or profiling operations while maintaining stable contact under load. This approach reduces the need for custom fixtures and speeds up set-up for small series or maintenance tasks, improving throughput without sacrificing repeatability. Balanced design for safe, high-speed operation With a nominal diameter of 125 mm and a maximum permitted speed of 1,900 r.p.m., the VKC-5 is sized for a broad range of medium-duty turning applications. The unit's mass of 5.1 kg contributes to mechanical stability while the mounting interface features T-slots 4 × M8, enabling secure attachment to standard spindle faces or adapter plates. These characteristics combine to support reliable rotational balance and compatibility with many workshop machines. Practical benefits that reduce setup time The unit's configuration simplifies clamping of square, rectangular or odd-shaped blanks, cutting down on improvisation and secondary tooling. Fewer bespoke fixtures mean shorter lead times and a more consistent workflow on the shop floor. Paired with Metav's logistics and product range, the chuck fits into an efficient supply chain that emphasises accessibility of precision components and dependable stock levels for industry users. For secure, versatile clamping choose the Vertex VKC-5 — order or request mounting advice from Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: VKC-5 GTIN: 4061905086588 Brand: Vertex Facts Diameter: 125 mm Rated speed: 1,900 r.p.m. Weight: 5.1 kg T-slots: 4-M8 eClass: 21020490 Special features Independent four-jaw design Suitable for clamping irregular and square workpieces Category: Vertex FAQ How do independent jaws affect clamping precision? Independent jaws allow individual adjustment of each jaw, so the VKC-5 can centre and secure non-round or eccentric parts with controlled contact and reduced need for special fixtures. Which machines is this chuck compatible with? The VKC-5 is intended for lathes and turning centres that accept a 125 mm chuck and can operate within the stated maximum speed of 1,900 r.p.m. How is the chuck mounted to a spindle face? Mounting uses T-slots (4 × M8) as specified; ensure appropriate adapter plates and correct torque on fastenings for safe operation. Can the chuck hold square or rectangular stock reliably? Yes — the independent jaw arrangement is particularly suited to square and rectangular workpieces, enabling stable contact points without special jaws. What basic maintenance does the chuck require? Regular cleaning of the jaw slides, light lubrication of moving parts and inspection of mounting fastenings prolong service life and preserve performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm L-Stop For VQC Vices, Adjustable L-Shaped Stop - Vertex
Combine precise L-stop geometry, compact dimensions and stable mass to secure repeatable workholding and reduce setup time. Order the L-stop directly via Metav Werkzeuge or consult our advisers for compatibility and fast supply. VQC-125FPM L-stop for VQC vices — compact 125 x 54 x 37 mm (Vertex) The VQC-125FPM is an L-stop designed for use with VQC machine vices to provide accurate and repeatable part positioning in milling and machining setups. L-stop for VQC vices Compact 125 x 54 x 37 mm Weighs 1.06 kg for stable positioning Ensures repeatable part positioning Accurate positioning that reduces machining time The L-stop delivers a straightforward method for establishing a fixed datum that improves cycle consistency and reduces indexing errors. By providing a defined lateral and vertical reference, the L-stop simplifies fixture set-up and shortens the time needed for repeated clamping operations. The design supports predictable toolpaths and minimises rework, helping to maintain throughput in batch production and small-series manufacture. Emphasis on stable locating surfaces translates directly into fewer adjustments and more efficient use of machine time. Compact format for flexible fixture layouts With overall dimensions of 125 x 54 x 37 mm and a weight of 1.06 kg, this locating stop fits into constrained vise beds without compromising rigidity. The compact footprint allows multiple stops or auxiliary fixturing to be arranged in close proximity, enabling nested workholding or multi-fixture setups on a single vice. The modest size assists in preserving access to tooling while the mass contributes to resistance against displacement under cutting forces, so clamping remains consistent throughout the machining cycle. Seamless integration with VQC clamping systems Intended specifically for VQC series vices, the locating device is described as an L-stop for VQC vices, ensuring compatibility with established clamping patterns and T-slot arrangements. Integration into an existing clamping system avoids the need for extensive retrofitting and supports swift changeovers between components. This compatibility reduces downtime during tool changeover and supports lean work processes where rapid, repeatable fixturing is required. Practical benefits and quality assurance Selecting this locating stop supports measurable improvements in repeatability and process reliability. The simple geometry means inspection and maintenance are straightforward, while the clear specification of dimensions and mass allows engineers to predict behaviour under load. Sourcing through a specialist partner provides the additional assurance of a controlled supply chain and consistent product quality, which is particularly important for workshops that standardise fixturing components across multiple machines. Request a compatibility check or order through Metav Werkzeuge in Emmerich — our consultants will advise on fitment and delivery from stock Technical Data SKU: VQC-125FPM GTIN: 4061905092428 Article designation: L-stop Designed for: VQC vices ECLASS: 21029210 Facts Dimensions: 125 x 54 x 37 mm Weight: 1.06 kg Special features Designation: L-stop Application: for VQC vices Gallery images available FAQ What is the primary function of this locating stop? The locating stop provides a fixed reference for lateral and vertical positioning when clamping components in a vice, improving repeatability in machining operations. Is the VQC-125FPM compatible with all VQC series vices? Compatibility is stated for VQC vices; the VQC-125FPM was designed to match common VQC clamping patterns and should integrate with standard VQC vice arrangements. How do the dimensions affect fixture planning? The compact 125 x 54 x 37 mm footprint allows close placement within the vice and supports multi-stop layouts without excessive space demand. Can the locating stop withstand heavy cutting forces? The mass of the part (1.06 kg) contributes to stable seating and resistance to displacement; however, overall performance depends on clamping strategy and cutting parameters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm M18x2.5P Clamping Screw, Hardened Steel Threaded Shaft - Vertex
The combination of heat-treated steel construction, an M18x2.5 thread and a 125 mm overall length delivers secure, repeatable clamping while keeping tool changeover simple; rely on robust fastening and consistent performance for uninterrupted production. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for application advice. Clamping Screw 1365M — M18x2.5 thread, 125 mm length, Vertex Clamping Screw 1365M for industrial fixture and workholding applications, designed to provide reliable, heat-treated fastening where secure, repeatable clamping is required Heat-treated steel construction M18x2.5 thread for secure fastening 125 mm overall length Robust yet lightweight at 0.2 kg Consistent clamping precision for production workflows The compact fastener is designed to translate torque into reliable axial force via its M18x2.5 thread, providing reproducible clamping results across batches. Manufactured from heat-treated steel, the component resists deformation under load, which reduces the need for frequent retorqueing and supports stable part dimensions during machining. This leads to fewer stoppages for adjustment and a measurable improvement in process repeatability, making the fastener suitable for jigs, clamps and fixture assemblies where consistent contact pressure is essential. Built for durability to minimise maintenance intervals A focus on material integrity and simple, standard geometry means longer service life and fewer replacements. The heat treatment enhances wear resistance and the robust thread profile maintains engagement under cyclic loading, which contributes to reduced toolroom downtime. By using a standard metric thread and proven manufacturing practices, the fastener supports predictable lifecycle planning and easier inventory management, helping to keep the production line running with limited unplanned interventions. Fast integration with existing fixtures and easy handling Standardised dimensions and a clear specification make integration straightforward: the 125 mm length provides ample reach for a range of clamping setups while the modest mass (0.2 kg) keeps handling simple during assembly and reduces fixture weight. The metric M18x2.5 thread aligns with common componentry in industrial environments, simplifying retrofits and enabling the replacement of worn parts without redesign. Clear, verifiable specifications ensure compatibility checks can be completed quickly and decisively. For reliable clamping backed by Vertex quality, contact Metav Werkzeuge in Emmerich for ordering or technical advice via info@metav-werkzeuge.com or call +49 2822 7131930; consultants can advise on fixture compatibility and supply options Technical data Article number: 1365M GTIN: 4061905090455 Manufacturer: Vertex Machinery Works Co., Ltd. Eclass: 21022190 Facts Length: 125 mm Weight: 0.2 kg Thread: M18x2.5P Materials & features Material: Heat-treated steel Product type: Clamping screw SKU: 1365M FAQ What thread specification does this clamping screw use? The clamping screw 1365M features an M18x2.5 thread suitable for standard metric fixtures. What material is used for the fastener? The component is made from heat-treated steel, providing increased wear resistance and dimensional stability. What are the overall length and weight of the fastener? The fastener measures 125 mm in length and weighs approximately 0.2 kg, giving good reach with manageable handling weight. Is the 1365M suitable for use in jig and fixture assemblies? Yes, the 1365M clamping screw is intended for workholding and fixture applications where repeatable clamping is required. Who manufactures the fastener and how is it identified? This clamping screw is manufactured by Vertex and is listed under the article number 1365M (GTIN 4061905090455). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Parallel Gauge Set Pair-Set Precision Ground 24 Pairs ±0.01 mm - AMF
Benefit from hardened, case‑stored precision and pairwise plan‑parallel finishing for reliable stackable shimming; order the AMF Parallel shim set directly via Metav Werkzeuge or consult the technical team for specification support. Parallel shim set No. 6348P - 125 by AMF — 24 pairs, 125 mm, case‑hardened The Parallel shim set No. 6348P - 125 is a precision shimming kit for exact height setting and gap compensation in jigs, fixtures and machine set‑up. Precision, pairwise ground and parallel Case‑hardened for lasting wear resistance 1 mm step coverage across the set Height tolerance IT5 ±0.01 mm Precision shimming for reproducible set‑up The AMF set delivers measured, repeatable results because each shim is pairwise ground and finished to be plan‑parallel. This manufacturing approach guarantees consistent contact surfaces when shims are stacked, so nominal build‑ups increase in exact increments. With a height tolerance of IT5 and a declared accuracy of ±0.01 mm, the kit supports fine adjustment tasks where micrometric control matters. The 1 mm step arrangement across the set simplifies calculation of cumulative heights, reducing trial‑and‑error and shortening set‑up time in series production or toolmaking. Durable construction and tidy storage for workshop use Components are case‑hardened, providing improved surface hardness and resistance to wear under repeated handling and clamping forces. The set is supplied in a protective wooden case, which keeps elements organised and prevents accidental mixing of pairs — a practical advantage for busy benches. Each shim measures 125 mm in length and the complete delivery contains 24 pairs, making the assortment suitable for a wide range of machine‑side and assembly tasks where stable, long‑term accuracy is required. Conformity, compatibility and operational benefits Manufactured with reference to DIN ISO 2768m, the shims offer standardised dimensional integrity and are suitable for integration into existing fixture systems and measurement routines. The clearly defined increments and traceable tolerance class help maintenance teams and quality departments to document adjustments and reproduce settings reliably. As a precision accessory for production and maintenance, the set reduces waste caused by incorrect shimming and supports efficient changeovers in both single‑piece flow and repetitive operations. Technical enquiries regarding suitability for specific applications are welcome. For hardened, high‑precision height setting, order the AMF Parallel shim set No. 6348P - 125 via Metav Werkzeuge or contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4123321021NW Type: Nr. 6348P - 125 Brand: AMF Product: Parallel shim set Content: 24 pairs Facts Length: 125 mm Step increments: 1 mm Height tolerance: IT5 ±0.01 mm Standard: DIN ISO 2768m Special features Case‑hardened Pairwise plan‑parallel fine ground Wooden storage case Sets cover step range with 1 mm increments FAQ What is the stated height tolerance of the set? The AMF Parallel shim set No. 6348P - 125 is specified with a height tolerance of IT5 and a nominal tolerance of ±0.01 mm. How many shims are included and what are their dimensions? The delivery contains 24 pairs of parallel shims; each element is 125 mm long and arranged to cover heights in 1 mm increments across the set. Are the shims suitable for repeated clamping and fixture use? Yes — the shims are case‑hardened to improve surface durability, making the set appropriate for frequent handling and clamping operations in workshop environments. Is the finish suitable for stacking without introducing tilt? Pairwise plan‑parallel finishing ensures flat contact faces; this pairwise ground quality limits cumulative error when shims are stacked for height build‑up. Which standard governs the remaining dimensions of the set? Remaining dimensions and general tolerances are produced in accordance with DIN ISO 2768m for consistent integration into tooling and fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Soft Jaws For VQC Vises - Vertex
Take advantage of precise, protective clamping with the soft jaws’ exact dimensions and reliable fit for VQC vices; the combination of secure holding, easy replacement and clear technical data keeps setup time low and rework minimal. Order the VQC-125MJ directly via Metav Werkzeuge or consult our specialists for application advice. VQC-125MJ Soft Jaws for VQC Vices — Soft clamping, 124.5 x 87 x 60 mm (Vertex) The VQC-125MJ soft jaws are a workshop accessory designed to provide protective clamping for VQC vices, ideal for delicate and finished surfaces where secure yet gentle holding is required. Soft clamping for delicate workpieces Precise dimensions 124.5 x 87 x 60 mm Compatible with VQC series vices Protect delicate workpieces while maintaining productivity Soft clamping surfaces reduce marking and deformation during machining and finishing operations. The soft jaws supply an even contact surface that distributes clamping forces, which helps to lower scrap rates and improve surface quality on sensitive components. For assembly and light machining tasks, this protective contact minimises the need for additional packing or bespoke fixtures, so set-up is faster and parts remain ready for subsequent operations without extra rework. Accurate fit and repeatable positioning for steady workflows Compatibility with VQC vices ensures a secure, repeatable interface between the accessory and the vice body. With external dimensions of 124.5 x 87 x 60 mm, the jaws align precisely to the vice mounting, simplifying changeovers and maintaining concentricity during clamping. The specification is listed under SKU VQC-125MJ for straightforward identification and ordering. A consistent fit contributes to predictable clamping behaviour and supports higher throughput in serial tasks. Operational benefits that support quality and efficiency By using purpose-made soft jaws, the risk to finished components is reduced while bench time remains efficient. The accessory’s design supports rapid replacement and integration into existing clamping routines, which helps to shorten downtimes and sustain production cadence. As a practical workshop solution, these jaws complement existing tooling kits and promote uniform handling of delicate parts, thereby enhancing overall process reliability and part quality. Contact Metav Werkzeuge today for tailored advice on selecting the correct soft jaws for VQC vices and ensure the right configuration for the workshop — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VQC-125MJ GTIN: 4061905087523 Weight: 4.73 kg Dimensions: 124.5 x 87 x 60 mm Facts Weight: 4.73 kg Dimensions (L x W x H): 124.5 x 87 x 60 mm GTIN: 4061905087523 Special features Soft jaws for protective clamping Compatible with VQC series vices Classification: eClass 21029107 Manufacturer: Vertex FAQ What applications are the soft jaws best suited for? The VQC-125MJ soft jaws are intended for holding delicate or finished components in VQC vices where protective clamping is required, for light machining, inspection and assembly tasks. How are the jaws fitted to a VQC vice? Fitting follows the vice’s standard jaw mounting; the accessory aligns to the vice flange and secures in place, providing a repeatable clamping surface for workshop operations. Will the soft jaws prevent surface marring on finished parts? Yes, the soft clamping surface on the VQC-125MJ significantly reduces the risk of marking, supporting higher first-pass yield for finished components. Is the VQC-125MJ compatible across the VQC product range? The accessory is designed for use with VQC series vices; compatibility is ensured by matching the vice mounting and the stated dimensions. How does the use of soft jaws affect setup times? Using dedicated soft jaws reduces the need for custom packing and rework, enabling faster changeovers and more consistent clamping behaviour during production. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Stud Bolt DIN 6379 Heat Treated Grade 8.8, M16 Thread - AMF
Take advantage of a standardised fastener with proven tensile performance: the DIN 6379 specification combined with tempering to property class 8.8 delivers dependable strength for mechanical joints, while the M16 thread and 125 mm overall length ensure straightforward integration in existing assemblies – order directly via Metav Werkzeuge or consult their specialists for configuration and supply. Stud bolt DIN 6379 M16x125 mm, tempered to property class 8.8 (AMF) A Stud bolt DIN 6379 M16x125 mm engineered for high-strength fastening in mechanical and structural applications DIN 6379 standardised stud bolt Tempered to property class 8.8 for strength M16 thread with 125 mm overall length Hex width 19 mm for common spanners Dependable strength designed for repeated loading The stud adheres to DIN 6379, providing a verified basis for specification in production and maintenance documentation. Tempering to property class 8.8 means a defined yield and tensile strength suitable for many bolted connections where a balance of ductility and load capacity is required. This combination reduces the risk of premature failure under cyclical loads and supports predictable torque behaviour during assembly, delivering measurable improvements in joint reliability. Clear, measurable dimensions for quick assembly Precise sizing reduces assembly time and fitment errors: the component features an M16 threaded section and an overall length of 125 mm, with an across-flats width of 19 mm for commonly used wrenches. An indicated unthreaded section of b: 75 mm provides a controlled shank length for locating or shear applications, supporting consistent clamp lengths and enabling repeatable preload in bolted joints. These objective values simplify part selection and inventory management for workshops and maintenance teams. Versatile application and streamlined procurement Manufactured by AMF, the part is suitable for a wide range of mechanical assemblies where a robust threaded stud is required, from fixture construction to machine repairs. The combination of standard compliance and documented mechanical class helps integrate the component into quality-management systems and parts lists. For purchasing efficiency and supply reliability, Metav Werkzeuge offers centralised access to this and related fasteners, reducing supplier complexity while maintaining traceability and batch control. For tailored advice on AMF stud bolts (SKU 4000833274NW) and to ensure the right specification for critical joints, contact Metav Werkzeuge in Emmerich or request a technical consultation by phone or e-mail. Technical data Article number: 4000833274NW Designation: Stud bolt DIN 6379 M16x125 mm, tempered to property class 8.8 (AMF) Label: Stiftschraube DIN6379 M16x125mm vergütet auf 8.8 AMF Dimensions & thread Thread: M16 Overall length: 125 mm Width (across flats): 19 mm Unthreaded section b: 75 mm Packaging unit: 1 Special features Standard: DIN 6379 Property class: 8.8 (tempered) Brand: AMF SKU: 4000833274NW FAQ What mechanical class does this stud bolt meet? The stud bolt meets property class 8.8, indicating defined yield and tensile strength suitable for many structural and mechanical fastening tasks. Which standard governs the design of this fastener? The component is manufactured to DIN 6379, ensuring compatibility with engineering specifications that reference this German industrial standard. What are the key dimensions to check before ordering? Check the M16 thread, the 125 mm overall length and the across-flats width of 19 mm to ensure correct fitment for intended assemblies. Is there an unthreaded shank and how long is it? Yes, the product data indicates an unthreaded section b: 75 mm, which is useful for locating or shear-plane applications. Who is the supplier and how can this item be ordered? The SKU 4000833274NW identifies the AMF stud bolt; procurement and further consultation are available through Metav Werkzeuge for ordering and supply logistics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Stud Bolt DIN 6379 Metric Fine Threaded Tempered Grade 8.8 - AMF
Take advantage of a high‑tensile, DIN‑compliant fastener: the M20 stud bolt, heat‑treated to property class 8.8 with an overall length of 125 mm ensures dependable clamping force and long service life; order directly via Metav Werkzeuge or consult the technical team for application advice. Stud bolt DIN 6379 M20×125, property class 8.8 — AMF The stud bolt DIN 6379 M20×125 is a heat‑treated, metric threaded fastener designed for secure mechanical joins in industrial and maintenance settings. Conforms to DIN 6379 standard Metric thread M20 for common assemblies Heat‑treated to property class 8.8 Overall length 125 mm for versatile use Consistent clamping performance for machinery assemblies The stud bolt is designed to deliver reliable clamping force where repeatable connections are required. Compliance with DIN 6379 establishes predictable geometries and tolerances, which supports consistent torque‑to‑preload behaviour in bolted joints. The M20 thread and property class 8.8 rating indicate a balance between tensile strength and ductility, reducing the risk of sudden brittle failure while enabling secure fixation under dynamic load. For procurement planners and maintenance engineers, these characteristics translate into predictable assembly behaviour and reduced rework. Simplified installation thanks to standard dimensions Standardised dimensions reduce complexity at the workbench and accelerate assembly cycles. The stud’s 125 mm overall length and thread specification match common nuts and clamping elements, enabling straightforward replacement in existing equipment without custom adaptations. A nominal width value of 27 mm supports compatibility with typical spanners and torque tools, so maintenance intervals can be completed faster and with conventional tooling. This dimensional clarity supports lean workshop processes and lowers downtime during repairs. Material treatment for durability under load The fastener is quenched and tempered to 8.8, providing strength suitable for many mechanical and structural applications while maintaining sufficient toughness. Heat treatment improves resistance to plastic deformation during tightening and service loads, which extends component life and maintains joint integrity. The construction ensures that the fastener sustains repeated assembly cycles and mechanical stresses common in industrial environments, offering a cost‑effective alternative to more exotic materials where extreme corrosion resistance or ultra‑high hardness are not required. Procurement and quality traceability for operations Specifying a fastener that adheres to established standards simplifies quality assurance. With the DIN reference and brand identification, batch traceability and conformity checks become straightforward steps in incoming inspection. The supplied packaging unit of 1 facilitates controlled stocking of critical spares, and the clear article identifier (SKU) supports efficient reordering and inventory management. Choosing a standardised stud from a recognised supplier minimises specification variance and supports uninterrupted production throughput. Contact Metav Werkzeuge for supply and specification support on AMF stud bolts conforming to DIN 6379 — available from our Emmerich warehouse; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 4000833283NW Brand: AMF Product type: Stud bolt Label: Stiftschraube DIN6379 M20x125mm vergütet auf 8.8 AMF Facts Standard: DIN 6379 Thread: M20 Overall length: 125 mm Width: 27 mm Packaging unit: 1 Special features Property class: 8.8 (quenched and tempered) SKU: 4000833283NW Intended use: industrial fastening and maintenance FAQ What standard does this stud bolt comply with? The stud bolt complies with DIN 6379, ensuring standardised dimensions and tolerances suitable for industrial assemblies. What is the tensile class of the fastener? The fastener is heat‑treated to property class 8.8, giving balanced tensile strength and toughness for general mechanical applications. Which thread and length are specified for this article? Thread is M20 and the overall length is 125 mm, matching common metric nuts and assembly requirements. Is the stud suitable for repeated disassembly and reassembly? Yes. The quenched and tempered 8.8 treatment improves resistance to deformation during tightening and reuse, so it is suitable for maintenance cycles. How is the product supplied for inventory purposes? The item is supplied in a packaging unit of 1, with SKU 4000833283NW for easy reordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Stud Screw DIN 6379 Heat Treated 10.9 M10 - AMF
High-strength fastening for critical assemblies: tempered to grade 10.9 and manufactured to DIN 6379 for predictable mechanical behaviour in industrial use. Order this stud bolt directly via Metav Werkzeuge or consult our specialists for selection and availability. AMF stud bolt DIN 6379 M10 x 125 mm, Grade 10.9 The AMF stud bolt DIN 6379 M10 x 125 mm is a tempered threaded stud intended for high-strength mechanical and structural fastenings in workshops and production environments. Tempered to grade 10.9 Conforms to DIN 6379 standard Thread size M10 x 125 mm Width across flats 13 mm Reliable high-strength performance for safety-critical joints Manufactured to a recognised metric strength class, the stud provides repeatable mechanical properties under load. The grade 10.9 heat treatment denotes quenched and tempered steel with elevated yield and tensile strength, which reduces deformation and the risk of thread failure in dynamic or heavily stressed assemblies. For procurement and maintenance planning, the combination of a standardised specification and robust material treatment enables long-term predictability and lowers the frequency of unscheduled replacements while ensuring component safety in machinery and structural fixtures. Standardised dimensions for efficient assembly and inspection Compliance with DIN 6379 and the metric thread M10 x 125 mm ensures interchangeability with existing fasteners and compatibility with standard tooling. The 13 mm width across flats simplifies torque application with common spanners and sockets, supporting consistent assembly practice and accurate torque control. Standard dimensions support streamlined inventory management and permit straightforward verification during quality control; inspection routines can rely on familiar reference values rather than bespoke measurements, improving throughput in production and maintenance operations. Consistent workshop durability and traceable supply Tempering to grade 10.9 delivers consistent hardness and mechanical characteristics that are suitable for bolted joints exposed to high loads. The fastener’s specification reduces uncertainty during design and replacement work, while the clear labelling and traceability—including SKU 4000833254NW—support orderly stock management and documentation. Where project specifications mandate standard-compliant fasteners, this stud offers a cost-effective, reliable choice that aligns with industrial quality requirements and the expectations of professional workshops. For reliable high-strength fastenings select the AMF stud bolt and contact Metav Werkzeuge in Emmerich for availability and specialist advice: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000833254NW Description: Stud bolt, DIN 6379, tempered to 10.9 Manufacturer: AMF Packaging unit: 1 Dimensions & thread Thread: M10 Overall length: 125 mm Width across flats: 13 mm Materials & standards Strength class: 10.9 (quenched and tempered) Standard: DIN 6379 Identification: SKU 4000833254NW FAQ What does grade 10.9 mean for the stud’s performance? Grade 10.9 indicates a quenched and tempered steel fastener with elevated yield and tensile strength; the AMF stud bolt in grade 10.9 delivers higher load capacity and reduced risk of plastic deformation under heavy service loads. Is this fastener compatible with standard M10 nuts and tapped holes? Yes, the stud’s M10 x 125 mm thread matches standard metric M10 fastening elements and can be used with corresponding nuts and tapped holes specified for M10 threads. Can the stud be used in structural or machinery applications? The stud, produced to DIN 6379 and tempered to grade 10.9, is designed for mechanical and structural fastening where higher tensile strength and predictable behaviour are required. How is the stud identified in stock and documentation? The fastener is identified by SKU 4000833254NW and the designation Stud bolt, DIN 6379, M10 x 125 mm, tempered to 10.9, which assists in procurement and traceability. What tooling is recommended for installation? Assembly is facilitated by the 13 mm width across flats, permitting the use of standard sockets or spanners sized to that dimension for consistent torque application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Stud Screw M12x125 Hardened 10.9 DIN 6379 - AMF
Take advantage of DIN 6379 conformity and property class 10.9 strength for secure, long-term assemblies; the M12 thread and 125 mm overall length enable reliable integration in deep or multi-layer joints. Order directly via Metav Werkzeuge or request advice from our consultants for specification matching. AMF Stud Bolt DIN 6379 – M12 x 125 mm, Property Class 10.9 The AMF Stud Bolt DIN 6379 is a hardened threaded stud designed for high‑strength industrial fastening and assembly applications. High tensile strength grade 10.9 Thread size M12 for standard fittings Overall length 125 mm for deep assemblies Conforms to DIN 6379 standard Secure fastening with measurable strength The component is manufactured and tempered to property class 10.9, which delivers high tensile strength and predictable elastic behaviour under load. Compliance with DIN 6379 ensures that the geometry and thread form meet established industrial tolerances, simplifying integration with standard nuts and mating components. This technical consistency reduces assembly rework and supports reliable load-bearing joints in machine construction and structural fastening. Compatibility that speeds up assembly A standard M12 thread combined with an overall length of 125 mm offers straightforward interchangeability with common fasteners and fixtures. The stud’s dimensions favour installations where depth and clamping length matter, enabling designers and fitters to calculate clamping forces and thread engagement with confidence. Clear, standardised specifications mean fewer bespoke parts, faster procurement cycles and reduced planning overhead on the shop floor. Traceability and practical supply for production Marked identification and the supplied article reference make stock control and reordering efficient; the item is supplied per packaging unit 1, suitable for precision replacement or single‑part assembly work. The robust mechanical properties and standardised form reduce the risk of premature failure, supporting uptime and predictable maintenance intervals. For workshops and production lines that rely on repeatable quality, this stud is a practical component to keep on the shelf. Contact Metav Werkzeuge for tailored procurement advice, specification confirmation and to secure the correct stud bolt for the application; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 4000833261NW Standard: DIN 6379 Thread: M12 Overall length: 125 mm Width: 15 mm Facts Property class: 10.9 Packaging unit: 1 SKU: 4000833261NW Special features Tempered to property class 10.9 Conformity with DIN 6379 Addition: b: 75 Manufacturer: AMF FAQ What material strength does the stud provide? The stud is specified as tempered to property class 10.9, providing high tensile strength and reliable performance in load-bearing applications. Is the thread compatible with standard nuts and fittings? Yes, the M12 thread matches standard metric M12 nuts and components, allowing straightforward integration into common assemblies. What standard certifies the stud’s dimensions and tolerances? The stud conforms to DIN 6379, which governs the dimensions and thread form relevant to this type of threaded stud. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm T-Nut Clamp For T-Nut 12+14+16mm, DIN 6314 - AMF
Benefit from a combination of DIN 6314 conformity, compatibility with 12/14/16 mm T‑slots and support for M12/M14 clamping hardware for dependable workstation clamping; order directly via Metav Werkzeuge or consult our specialists for tailored selection advice. AMF T‑slot clamp DIN 6314 – for T‑slots 12/14/16 mm, 125 mm length The AMF T‑slot clamp DIN 6314 is a robust clamping component designed to secure workpieces on machine tables and milling fixtures with standard T‑slots Compatible with T‑slots 12 / 14 / 16 mm 125 mm overall length for extended reach Compatible with M12 and M14 clamping bolts Reliable clamping across common T‑slot widths Conforming to DIN 6314, this T‑slot clamp delivers consistent positioning and repeatable clamping performance on standard machine tables. Compatibility with 12/14/16 mm slots reduces the variety of clamps required in a busy workshop, streamlining inventory and setup. The standardised form helps achieve precision in fixture builds, as the component mates cleanly with established table geometries and commonly used clamping elements. Where stability and reproducibility matter, the standard conformity is a practical guarantee of fit and function. Fast installation and secure hold with standard threads Designed for use with M12 and M14 fasteners, the clamp enables quick assembly and secure mechanical engagement without special adapters. A 125 mm overall length provides additional reach for deeper setups while maintaining a compact footprint for crowded jigs. The combination of familiar thread sizes and extended reach supports efficient cycle changes and reduces non‑productive time during machining operations. For workshop teams, this means fewer adjustments and a faster return to productive runs while retaining a reliable clamping force. Built for workshop resilience and broad workshop use The design suits routine production and jobbing environments where robust components are required for repeated use. Compatibility with standard clamping hardware makes the clamp a practical choice for retrofit fixtures as well as new setups. The component’s straightforward geometry allows easy inspection and replacement during maintenance intervals, supporting uptime and predictable process quality. For buyers seeking a dependable, standards‑based clamping element, this option balances flexibility and longevity while fitting seamlessly into established tooling systems. For specification advice, availability and ordering of the AMF T‑slot clamp, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — our technical team will assist with selection and delivery options Technical data Article number: 4000833004NW Product: T‑slot clamp (Spanneisen) Brand: AMF Standard: DIN 6314 Facts Overall length: 125 mm Width: 14 mm T‑slot compatibility: 12 / 14 / 16 mm Suitable for thread sizes: M12, M14 Packaging unit: 1 Special features Suitable for use with standard clamping bolts M12 and M14 Axite enrichment: Addition: A: 20; B2: 40; B3: 14; E1: 21; E2: 50 SKU / UID: 4000833004NW FAQ How does the clamp accommodate different T‑slot widths? The clamp is profiled for 12 / 14 / 16 mm T‑slots so it fits common machine tables; the DIN 6314 geometry ensures a correct seating across these widths. Is this clamp suitable for milling fixtures and machine tables? Yes — the AMF T‑slot clamp DIN 6314 is intended for securing workpieces on milling fixtures and machine tables where standardised clamping is required. Which fasteners are recommended with this clamp? Use M12 or M14 clamping bolts as specified; these thread sizes are supported to provide the required clamping force and compatibility. What is the overall length and when is it useful? The overall length is 125 mm, offering extended reach for deeper setups or when additional clearance is needed between the clamp and workpiece. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm T-Slot Clamping Bar For T‑Nut 16+18, DIN 6316 - AMF
Reliable clamping performance and DIN 6316 conformity combine with compatibility for 16 + 18 mm T‑slots and a compact 125 mm length to deliver stable workholding for small fixtures and machining setups. Order directly via Metav Werkzeuge or contact the technical team for fit verification and supply details. Clamping bar AMF (DIN 6316) for T‑slot 16 + 18 mm, 125 mm length A robust clamping bar designed to secure workpieces in T‑slot tables with 16 and 18 mm grooves, offering standardised mounting and compact length for tight set‑ups. DIN 6316 compliance Fits T‑slots 16 and 18 mm Length 125 mm for compact clamping Suitable for M16 and M18 fastenings Secure, standardised clamping for repeatable setups The clamping bar conforms to DIN 6316, which ensures predictable geometry and repeatable positioning when used with matching T‑nuts and bolts. This standardisation reduces setup variation and supports consistent machining results; the direct consequence is fewer rejects and less rework. Compatibility with M16 and M18 fastening systems allows the clamping element to be integrated into common fixturing layouts without the need for custom adapters, improving process efficiency and throughput. Compact design that integrates with existing tables With a 125 mm overall length and suitability for 16 + 18 mm T‑slots, the component is intended for compact fixturing where space is limited but rigidity remains essential. The reduced footprint permits multiple clamping points on small workpieces and simplifies the arrangement of stop blocks and parallels. By using standard T‑slot interfaces and conventional fasteners, the clamping bar minimises the need for special tooling and keeps clamping procedures straightforward for production and repair tasks. Robust conformity and lower downtime through predictable behaviour Manufactured for reliable performance, the clamping element delivers consistent clamping force across cycles, which helps to avoid loosening and vibration-related issues during machining. Compliance with recognised standards supports quality assurance processes and makes inspection and replacement straightforward. The compact, standardised design also supports lean inventory strategies: the single‑piece spec reduces variant complexity and helps to maintain a smooth supply to the workshop bench. For reliable, standardised clamping that fits common T‑slot tables, contact Metav Werkzeuge for availability and technical advice — Metav Werkzeuge provides local stocking and expert guidance from Emmerich. Technical data Article number: 4000833059NW SKU / UID: 4000833059NW Designation: Clamping bar DIN 6316 for T‑slot 16 + 18 mm L 125 mm Facts Standard: DIN 6316 T‑slot width: 16 + 18 mm Length: 125 mm Width: 18 mm Suitable for: M16, M18 Packaging unit: 1 Special features Manufacturer: AMF Product type: Clamping bar Axite enrichment: Addition: A: 25; B2: 50; B3: 25; C: 20; E1: 51,5; E2: 40 FAQ Which table grooves are compatible with this clamping bar? The clamping bar is designed for 16 + 18 mm T‑slot grooves and works with standard T‑nuts specified for those widths. Can this component be used with M16 and M18 bolts? Yes, the clamping bar is suitable for fastening with M16 and M18 bolts, providing secure attachment to matching T‑nuts. Does the clamping bar meet an industry standard? The component is manufactured to DIN 6316, ensuring standardised dimensions and repeatable positioning in fixture assemblies. What is the overall length and typical application area? With an overall length of 125 mm, the clamping bar is ideal for compact fixturing and small‑format machining tables where space is restricted. Is this item supplied singly or in sets? The item is supplied as packaging unit 1, intended for single‑piece replacement or incremental fixture assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm T-Slot Screw M20 Grade 8.8 DIN 787, T-Nut 20mm – AMF
Take advantage of the proven combination of DIN 787 conformity, Grade 8.8 strength and precise M20 threading for reliable clamping in 20 mm T-slots; order the fastening element directly via Metav Werkzeuge or consult the Metav specialists for selection support. AMF T-slot screw (DIN 787) – 20 mm T-nut, M20, 125 mm, Grade 8.8 A AMF T-slot screw (DIN 787) designed for secure clamping in machine table T-slots and fixture systems, offering standardised dimensions and robust tensile properties. DIN 787 standardised T-slot screw Fits 20 mm T-slots M20 thread, 125 mm overall length Grade 8.8 high tensile strength Consistent clamping performance for production environments Manufactured to DIN 787, this T-slot fastening delivers a precise fit in machine table grooves and fixture plates. The combination of M20 thread and 125 mm overall length ensures reliable engagement and consistent clamp pressure for medium to heavy-duty applications. The Grade 8.8 designation indicates a high-tensile fastener that maintains preload under dynamic loads; this regularity reduces retightening intervals and supports predictable process performance. Clear specification for correct selection and assembly The defined geometry — matched to a 20 mm T-slot — simplifies component selection and reduces setup time. The coarse thread size (M20) enables secure torque transmission while the overall length provides necessary engagement depth for many jigs and workholding arrangements. For customers less familiar with standards, DIN 787 denotes standardised T-slot dimensions, meaning compatible counterparts from other manufacturers will align without modification, aiding interchangeability on workshop equipment. Practical advantages on the shop floor and in maintenance Using a standardised, high-strength fastener reduces downtime caused by incorrect or underspecified hardware. The fastener’s geometry supports straightforward installation with common torque tools; retention in the T-slot is immediate once positioned and tightened. For complex assemblies or unusual configurations, Metav’s product data and advisors can clarify whether the AMF T-slot screw matches exact fixture requirements and recommend complementary components to complete the clamping system. For secure and standard-compliant clamping elements, order the AMF T-slot screw via Metav Werkzeuge or contact Metav’s consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and supply options Technical data Article number: 4000603236NW Product: T-slot screw (T-Nutenschraube) Manufacturer: AMF Standard: DIN 787 Facts Thread: M20 T-slot width: 20 mm Overall length: 125 mm Pack quantity: 1 Addition: A: 19.7; B: 85; E: 32; K: 12 Special features Grade 8.8 tensile class Standardised T-slot geometry Designed for machine table and fixture clamping Axite enrichment dimensional values included FAQ What T-slot size does this screw fit? This screw is specified for a 20 mm T-slot, ensuring compatibility with standard 20 mm machine table grooves. What does Grade 8.8 mean for load capability? Grade 8.8 indicates a high-tensile steel fastener; the AMF T-slot screw therefore provides elevated strength and maintains preload under typical workshop loads. Is the fastener compliant with an industrial standard? Yes, the T-slot screw is manufactured to DIN 787, which standardises T-slot fastening geometry for interchangeability. Which thread and length are provided? The product features an M20 thread and an overall length of 125 mm, suitable for medium to heavy clamping engagements. Can the dimensional additions A, B, E and K be used for fixture planning? Yes, the listed additions (A: 19.7; B: 85; E: 32; K: 12) supply the key dimensions needed for precise fixture and component layout. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Universal Jaws With Prism Stop For Round Stock, 0.01mm Accuracy - Vertex
Take advantage of precise measurement repeatability and secure clamping: the combination of 0.01 mm accuracy, a prism stop for round stock and compatibility with 125–140 mm caliper jaws delivers reliable results for everyday workshop tasks. Order the accessory directly via Metav Werkzeuge or consult the team for integration advice. Universal Jaws with Stop (VWSJ-5) — Caliper jaws with prism stop by Vertex The Universal Jaws with Stop (VWSJ-5) are a precision clamping accessory designed to convert standard calipers into a repeatable measuring and holding solution for round and irregular workpieces in metalworking and engineering shops. Precision to 0.01 mm Prism stop for round stock Compatible with jaws 125–140 mm Robust 1.7 kg assembly Reliable precision for routine measuring tasks These jaws deliver measurable benefits where consistent readings matter. With a stated accuracy of 0.01 mm, the accessory reduces measurement variability and supports tighter process control on inspection benches and assembly stations. The specified accuracy refers to the repeatability achieved when the clamping surfaces are used with a compatible caliper; in practice, this translates to fewer rejects and less rework when comparing serial parts. The solid construction also minimises deflection during clamping, so the caliper jaws maintain alignment under typical workshop handling. Secure handling of round and irregular stock A defining feature is the integrated prism stop, engineered to centre and stabilise cylindrical components during measurement or light machining set-ups. The prism profile prevents lateral movement and allows a consistent datum when repeatedly checking diameters or concentric features. The accessory fits jaws with a width range of 125–140 mm, making it suitable for a wide range of vernier and digital calipers commonly used in production and toolrooms. By converting handheld equipment into a stable measuring fixture, the device shortens set-up time and improves operator confidence in routine checks. Practical design for workshop integration Compact dimensions of 175 x 39 x 49 mm and a net weight of 1.7 kg make the unit robust yet easy to handle and mount. The design follows familiar attachment principles so retrofitting takes minimal time and no specialist tooling. For shops focused on efficiency, the result is straightforward: quicker checks, consistent contact points and a lower risk of human error during repetitive measurement tasks. The accessory is particularly advantageous for small-batch producers and maintenance teams who require dependable measurement aids without investing in dedicated fixtures. For tailored advice on integrating the Vertex accessory into existing workflows, contact Metav Werkzeuge in Emmerich; our consultants provide application guidance and availability details to ensure a smooth fit for workshop requirements Technical data Article number: VWSJ-5 GTIN: 4061905090868 Dimensions: 175 x 39 x 49 mm Weight: 1.7 kg Facts Accuracy: 0.01 mm Compatible jaws width: 125–140 mm Special features Prism stop for round pieces Suitable for fitting to standard caliper jaws Manufacturer: Vertex FAQ What calipers are compatible with these jaws? The Universal Jaws with Stop (VWSJ-5) are designed for use with caliper jaws that have a width between 125 and 140 mm; compatibility depends on the caliper's jaw mounting geometry and may require simple adjustment. How does the prism stop improve measurements? The prism stop centres round components and prevents lateral displacement, allowing repeatable contact points and more consistent diameter and concentricity checks when using the VWSJ-5 accessory. Is the stated accuracy of 0.01 mm guaranteed for all setups? The 0.01 mm figure describes the accessory's contribution to repeatability when used with a suitable caliper and correct technique; overall system accuracy will also depend on the measuring instrument and operator practice. Can the jaws be used for light machining or only for measuring? While primarily intended as a precision measuring aid, the robust construction and secure centring provided by the prism stop allow light holding tasks; heavy machining is not recommended. Which manufacturer produces this accessory? The accessory is supplied by Vertex and distributed under SKU VWSJ-5; Vertex production standards ensure consistent fit and finish for workshop use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Vertical Clamp With Angle Foot, 800 N Clamping Force, 1100 N Holding Force - AMF
Take advantage of the compact Size 1 design and an angled foot for flexible fixturing, combined with reliable clamping performance—800 N pressing force and 1,100 N holding force—to keep setups secure and reduce rework. Order the vertical clamp directly via Metav Werkzeuge or consult the team for application advice. Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF — vertical clamp with angled foot, Size 1 (AMF) A Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF is a vertical clamping device intended for compact fixtures and machine-table applications where a small footprint and stable holding are required. Vertical clamp with angled foot Size 1 for compact fixture use Max clamping force 800 N Holding force up to 1,100 N Secure workholding that lowers cycle risks and scrap The vertical clamp offers a controlled combination of pressing and holding forces—800 N pressing force for active clamping and 1,100 N holding force for static retention—which translates into fewer part movements during machining and less rework. The clamping action is concentrated and predictable, making the device suitable where repeatable part location and process stability are essential. Reliable holding reduces set-up corrections and supports efficient production flows in jigs and fixtures. Compact mounting and straightforward integration Installation is simplified by the compact Size 1 geometry and the angled foot, which allows mounting in constrained spaces or at non‑orthogonal positions on fixture plates. The device is supplied with a pressure screw specified as M5 x 30, and a series of precise dimensional data (A = 5 mm; B = 34.5 mm; C = 14 mm; H1 = 125 mm; L1 = 61 mm) ensures predictable integration into assemblies. These measurable values let engineers plan clearances and fastenings in advance, avoiding on‑the‑fly adjustments and minimising downtime during set-up. Built for consistent performance and dependable sourcing Manufactured by AMF, the clamp is designed for workshop and small-scale production environments where compact, repeatable clamping is required. Paired with Metav’s distribution and quality filtering from Emmerich, purchasing this clamping device gives access to reliable stock and expert advice. The combination of a purpose‑built clamping geometry and a recognised supplier network helps maintain throughput and parts quality across serial set‑ups and bespoke jigging tasks. For tailored advice on integrating the AMF vertical clamp into existing fixtures and for supply from Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich for prompt support and reliable delivery. Technical Data Article number: 4123590100NW Type: 6803 Label: Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF Product type: Senkrechtspanner Execution: mit Winkelfuß Manufacturer: AMF Packaging unit: 1 Facts Max pressing force: 800 N Max holding force: 1,100 N A [mm]: 5 B [mm]: 34.5 C [mm]: 14 D [mm]: 4.5 E [mm]: 18 F [mm]: 7 H [mm]: 45 H1 [mm]: 125 I [mm]: 10 K [mm]: 10 L1 [mm]: 61 M [mm]: 20 N [mm]: 30 O [mm]: 5 P [mm]: 30 a [°]: 98 Pressure screw: M5 x 30 Special features Size: 1 With angled foot Pressure screw M5 x 30 Compact footprint for tight fixtures Suitable for jig and fixture mounting FAQ What clamping and holding forces does the vertical clamp provide? The Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF offers a pressing force of 800 N and a holding force up to 1,100 N, providing secure retention for many fixture tasks. How is the clamp mounted in a fixture? Mounting uses the angled foot configuration and the integrated pressure screw (M5 x 30); the dimensional data (for example L1 = 61 mm, H1 = 125 mm) supports precise placement within a jig or on a machine table. Is Size 1 suitable for compact or multi‑station fixtures? Size 1 is aimed at compact fixture designs and multi‑station arrangements where a small footprint and predictable clamping behaviour are required. Are spare or replacement pressure screws available for this clamp? The clamp uses a standard M5 x 30 pressure screw; compatible replacement screws can be specified to the same thread and length to maintain the original clamping performance. What quality assurances support this clamping device? The device is an AMF vertical clamp distributed via Metav Werkzeuge; material traceability and dimensional specification enable consistent assembly and repeatable performance in production fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125x120x250mm Adjustable Jaw Chuck With 900 kgf Clamping Force, Includes 2x M12x75L & 2x M12x125L - Vertex
Combining 900 kgf clamping force, an adjustable mounting profile and a compact footprint, the FV-550 delivers stable, repeatable workholding for machining and inspection. Order the FV-550 adjustable jaws directly via Metav Werkzeuge or ask our consultants if needed. FV-550 Adjustable Jaws — 900 kgf clamping force, adjustable mounting (Vertex) The FV-550 adjustable jaws are a precision workholding accessory designed for machine vises and fixtures, offering controlled clamping and simple installation for a range of metalworking tasks. 900 kgf clamping force Adjustable, precision-machined profile Includes M12 bolts 2x75L & 2x125L Robust 23 kg construction Stable clamping for demanding machining The core advantage of these jaws is the 900 kgf clamping force, which provides high contact pressure without relying on excessive fixture mass. That level of force supports secure positioning for milling, drilling and light grinding operations, reducing part movement and improving surface finish. The profile is adjustable, allowing alignment with a variety of vice jaws and bespoke soft jaws; included M12 bolts (2x75L and 2x125L) simplify mounting and reduce set-up time. Overall, the combination of force and modularity enhances process reliability on the shop floor. Compact, heavy construction for vibration damping With a mass of 23 kg and external dimensions of 125 x 120 x 250 mm, the component combines a compact footprint with sufficient weight to dampen vibration during cutting. The substantial construction supports repeatable clamping pressure over extended cycles, contributing to consistent part tolerances. The design prioritises mechanical stability and straightforward integration into existing fixturing systems, making it suitable for batch work as well as prototype and toolroom applications. Practical handling, maintenance and selection Adjustment features are intentionally simple to service: the mounting interface and bolt sizes conform to common workshop standards, enabling quick replacement of fasteners without specialist tooling. Routine inspection of contact surfaces and mounting bolts ensures sustained accuracy. When selecting workholding components, consider the rated clamping force relative to the operation and material being machined; higher clamping figures like 900 kgf permit more aggressive feeds but require secure fixturing overall. The product’s precise machining and stable mass support long-term workshop use with minimal downtime. For dependable, high‑force clamping from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice or to secure the FV‑550 through our distribution channels — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: FV-550 GTIN: 4061905095733 Accessories included: 2x M12x75L and 2x M12x125L Facts Weight: 23 kg Dimensions: 125 x 120 x 250 mm Clamping force: 900 kgf Special features Adjustable design Suitable for machine vises and fixtures Robust construction for stable clamping FAQ What clamping force is provided by these jaws? The FV-550 adjustable jaws deliver a rated clamping force of 900 kgf, providing secure holding for typical milling and drilling operations. Which fasteners are supplied for installation? The set includes two M12x75L and two M12x125L bolts to facilitate mounting to standard vice or fixture interfaces. Are these jaws suitable for heavy‑duty machining? The FV-550, manufactured by Vertex, offers high clamping force and robust construction; suitability depends on the specific cutting parameters and machine setup rather than clamping component alone. What are the external dimensions and weight? Dimensions are 125 x 120 x 250 mm and the assembly weight is 23 kg, providing a compact but stable workholding solution. Can the jaws be adjusted to different workpiece profiles? Yes, the adjustable design permits alignment and adaptation to a range of workpiece geometries and vice configurations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125x160x80mm Modular Machine Vice, Precision 0.01mm Accuracy, 14.5kg - Vertex
Robust, compact and precise: the Vertex VMP-5L modular machine vice delivers 0.01 mm repeatability in a space-saving footprint, combining stability and adaptability for high-quality production. Its modular concept supports fast reconfiguration while the solid mass reduces vibration and improves cut consistency. Order the VMP-5L directly via Metav Werkzeuge or ask our consultants if needed. VMP-5L Modular machine vice — Compact 0.01 mm repeatability by Vertex The VMP-5L is a modular machine vice engineered for secure workholding on milling machines and machining centres, offering stable clamping in confined setups. Modular design for flexible clamping High repeatability 0.01 mm Compact 125 x 160 x 80 mm footprint Robust 14.5 kg base for stability Consistent precision that reduces rework The vice provides a measurable advantage where tolerance matters: 0.01 mm accuracy ensures reliable part-to-part repeatability, lowering the need for corrective operations. This level of precision is achieved through a stable build and finely engineered guideways, which together reduce positional deviation during cutting. For production environments focused on repeatability, the vice acts as a predictable fixture, enabling consistent cycle times and minimising scrap rates. The combination of compact form and exacting tolerance supports efficient batch processing without compromising quality. Flexible modular concept for faster setup A modular workholding system shortens fixture preparation and adapts to varied component geometries. The modular concept allows components of the vice to be reconfigured for different clamping schemes, reducing downtime between jobs. The compact footprint of 125 x 160 x 80 mm makes the unit suitable for smaller tables and tight nests, while the vice’s modularity supports staged fixturing for multi-operation setups. This flexibility translates into operational efficiency: fewer dedicated fixtures are required and changeovers become more straightforward, supporting leaner workflows. Stability and integration for demanding machining Weighing 14.5 kg, the vice offers a mass that dampens vibration and improves surface finish during aggressive cutting. The solid base and robust construction contribute to secure clamping under varying feed rates, helping to protect tool life and machine spindle bearings. Designed for integration with standard machining centres and milling machines, the vice supports straightforward mounting and stable operation in continuous production. For technicians and planners, the focus is on dependable clamping and reduced process variation, which together elevate throughput quality. For specification advice and delivery from Metav Werkzeuge—trusted partner for precision tools—contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VMP-5L GTIN: 4061905092404 Manufacturer: Vertex Machinery Works Co., Ltd. Type: Modular Eclass: 21020601 ETIM: EC002173 Core specifications Dimensions: 125 x 160 x 80 mm Accuracy: 0.01 mm Weight: 14.5 kg Materials & features Modular design Suitable for machine tool workholding SKU: VMP-5L Gallery images available FAQ What level of repeatability can be expected from this vice? The VMP-5L achieves repeatability to 0.01 mm, providing the precision required for tight-tolerance machining and consistent part interchangeability. Is the vice suitable for small-machine tables and tight setups? Yes. With compact dimensions of 125 x 160 x 80 mm, the unit is designed for confined machine tables and adaptable fixturing layouts. Can the modular concept reduce the number of dedicated fixtures? The modular design allows reconfiguration for varied clamping tasks, helping to reduce the need for multiple dedicated fixtures and shortening setup times. How does the weight affect machining performance? At 14.5 kg, the vice provides mass that dampens vibration and improves surface finish, contributing to steadier cutting conditions and longer tool life. Which machines is the vice intended to be used with? The vice is intended for mounting on milling machines and machining centres as a reliable workholding solution for diverse production tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125x160x80mm Modular Machine Vise, 0.01mm Accuracy, 14.5kg - Vertex
Take advantage of the combination of modular workholding, 0.01 mm repeatability and a compact footprint to stabilise production quality and reduce setup time. Order this vice directly via Metav Werkzeuge or consult our specialists for tailored configuration advice. VMP-55D Modular machine vice — 0.01 mm repeatability, compact design (Vertex) The VMP-55D is a modular machine vice engineered for precision clamping in milling and machining centres, offering adaptable workholding for a wide range of production tasks. Modular design for flexible workholding Precision clamping with 0.01 mm accuracy Solid construction, mass 14.5 kg Compact footprint 125 x 160 x 80 mm Consistent precision that reduces rework and scrap High-accuracy clamping effects process reliability and repeatability. With a measured accuracy of 0.01 mm, the vice secures components with minimal positional deviation, which lowers the need for rework and increases first-pass yield. For operations where tight tolerances determine part acceptance, this level of repeatability supports stable cycle times and predictable quality. The emphasis on precision is particularly beneficial when machining complex geometries or when subsequent measuring operations must align to exactly the same datum. Flexible modular workholding shortens setup time A modular approach to clamping enables rapid reconfiguration of the workholding layout without compromising rigidity. The vice’s modular workholding concept allows interchangeable jaws and add-on fixtures to be fitted for different part geometries, reducing fixture inventories and floor space. The compact footprint of 125 x 160 x 80 mm makes it suitable for crowded machine tables and multi-spindle setups, while maintaining clear access for tooling. For shops that run varied batches, the ability to adapt clamping quickly translates into fewer changeover minutes and improved throughput. Robust mass and stability for vibration damping A higher mass base contributes to machining stability by damping cutting forces and vibration. At 14.5 kg, the vice provides a stable platform that helps maintain tool life and improves surface finish consistency. The sturdy construction also supports heavy-duty cuts where resistance to lateral movement matters. Integration into existing machining centres is straightforward; the vice is intended for standard machine tables and can be combined with common fixturing components to create a reliable clamping solution that keeps downtime to a minimum. Discuss configuration options for Vertex modular clamping with Metav Werkzeuge — receive precise product matching and delivery from our Emmerich warehouse Technical Data SKU: VMP-55D GTIN: 4061905090363 Designation: Maschinenschraubstock (machine vice) Facts Dimensions: 125 x 160 x 80 mm Weight: 14.5 kg Accuracy: 0.01 mm eClass: 21020601 ETIM: EC002173 Special features Type: Modular Brand: Vertex Gallery images available FAQ What level of repeatability can be expected from this modular vice? The VMP-55D modular machine vice delivers a repeatability of 0.01 mm, supporting consistently tight tolerances across repeated setups. Can the vice be adapted for different part geometries? Yes, the modular workholding concept allows interchangeable jaws and fixtures so the vice can be reconfigured for varied shapes and batch types. Is the VMP-55D suitable for use on small machining centres? The compact footprint of 125 x 160 x 80 mm and solid mass make the vice suitable for small to medium machining centres and multi-station machines. How does the vice’s weight affect machining performance? At 14.5 kg, the vice provides effective damping of cutting forces, which helps to improve surface finish and extend tool life during demanding cuts. Who manufactures this machine vice? The vice is produced by Vertex and supplied under the SKU VMP-55D; Vertex is known for engineering robust clamping solutions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com