Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
1200 N Vertical Clamp With Horizontal Base, Safety Lock, Stainless Steel - Kukamet
Benefit from corrosion-resistant stainless steel, a compact horizontal base and a positive safety locking mechanism that together provide consistent, repeatable clamping in production fixtures; order the 211 vertical clamp via Metav Werkzeuge or contact our consultants for tailored advice. Kukamet 211 vertical clamp (S211-2-L) — stainless steel with safety lock The 211 vertical clamp (S211-2-L) is a stainless steel vertical lever clamp engineered for secure workholding in jigs, fixtures and light assembly applications where repeatability and safety are essential. Stainless steel construction Safety locking mechanism Horizontal base mount M6x40 clamping spindle Consistent hold for efficient production The 211 offers a precise clamping force 1200 N with a higher holding force 1400 N, delivering reliable retention for repetitive operations and short cycle times. The measurable forces translate into predictable part stability under load, reducing rework and stoppages. As a compact lever clamp, it supports quick manual actuation while maintaining consistent pressure, making it suitable for small-batch production and fixture-based assembly where cycle-time efficiency is valued. Safer handling and straightforward integration Equipped with a mechanical safety lock, the clamp secures the lever in the closed position to prevent unintended release during handling or transport. The horizontal base mounting enables simple incorporation into existing plates and tooling, while the M6x40 clamping spindle allows for fine pressure adjustment and secure contact with the workpiece. Installation takes minimal time and the design minimises moving-part exposure, supporting safer workshop processes and easier layout planning. Robust construction for workshop environments Manufactured from stainless steel, the clamp is corrosion-resistant and suited to demanding shop-floor conditions where humidity or coolant exposure can be factors. The low mass and compact footprint contribute to flexible fixture design without adding unnecessary bulk; the listed 0.23 kg weight keeps the clamp unobtrusive on precision jigs. Long-term maintenance demands are low due to the corrosion-resistant material and straightforward mechanical design, helping to preserve uptime and reduce total cost of ownership. For secure, repeatable clamping from Kukamet, contact Metav Werkzeuge for expert supply and advice — Metav Werkzeuge delivers from Emmerich with transparent handling and reliable logistics; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S211-2-L GTIN: 8680731509120 Material: Stainless steel Manufacturer: Kukamet Core figures Clamping force (press): 1200 N Holding force: 1400 N Spindle: M6x40 Weight: 0.23 kg Design & features Mounting: Horizontal base Safety lock: Yes Category: Clamp (spanner) eClass: 21041717 ETIM: EC011973 FAQ What is the maximum clamping force of this clamp? The clamp provides a clamping force of 1200 N and a holding force of 1400 N for secure positioning. Can the clamp be mounted on custom fixtures? Yes, the horizontal base design allows simple integration into bespoke fixture plates and jigs. Is the locking mechanism suitable for transport within an assembly line? The mechanical safety lock secures the lever in the closed position, preventing unintended opening during handling. What materials is the clamp compatible with? Constructed from stainless steel, the clamp is suitable for use in environments where corrosion resistance is required and is commonly used with metal workpieces in light assembly and fixturing. Does the spindle allow pressure adjustment? The M6x40 clamping spindle permits fine adjustment of contact pressure and compensates for slight workpiece height variations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With Safety Lock, Angle Base, Blackened Finish - Kukamet
Take advantage of a compact, right-angle mounting that delivers up to 1,200 N clamping force together with a safety lock for secure, repeatable operations. Order the clamp directly via Metav Werkzeuge or ask our consultants for application guidance. B213-2-L Vertical Toggle Clamp (Kukamet) — 1,200 N clamping force, safety lock The B213-2-L Vertical Toggle Clamp is a compact right-angle clamp designed for fixtures, jigs and assembly benches where secure, repeatable clamping and a minimal footprint are required Vertical toggle clamp with safety lock Right-angle base for bench or fixture Clamping force up to 1,200 N Holding force up to 1,400 N Secure, repeatable clamping that stabilises production The clamp combines a robust mechanical linkage with a safety lock to prevent accidental release during machining or assembly. The clearly defined clamping force of up to 1,200 N and a maximum holding force of 1,400 N give predictable results when used in repetitive operations, reducing rework and downtime. For applications that demand consistent part location—such as welding jigs, inspection fixtures or CNC setup—the device provides a dependable mechanical hold that is easy to verify and document. Space-saving mounting for cramped workstations Fitted with a right-angle base, the clamp is intended for mounting to vertical or horizontal fixture plates without occupying excessive bench space. Its compact design and blackened finish suit dense fixture layouts and offer a subdued appearance for production environments. The compact footprint enables closer part nesting and better use of the available workspace, which can shorten cycle times and increase throughput on small to medium batch runs. Easy integration and straightforward handling in the workshop Assembly and replacement are simplified by the supplied actuating spindle (M6x40) and the clamp’s lightweight construction. The device installs quickly into existing fixture plates and aligns reliably under repeated actuation. The B213-2-L’s mechanical simplicity minimises maintenance requirements while sustaining clamping performance throughout long production runs. For customers transitioning from makeshift holding methods to engineered fixtures, this clamp represents a practical step towards safer, more efficient workholding. Contact Metav Werkzeuge today for tailored advice and to source Kukamet B213-2-L vertical toggle clamps directly from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B213-2-L GTIN: 8680731507973 Manufacturer: Kukamet Facts Clamping force max: 1,200 N Holding force max: 1,400 N Weight: 0.265 kg Actuating spindle: M6x40 Special features Mounting: right-angle base Finish: blackened finish Safety lock: integrated Material: blackened/oxidised steel FAQ Is the clamp suitable for welding fixtures? The Kukamet B213-2-L vertical toggle clamp is suitable for welding fixtures where a secure mechanical hold and a safety lock are required; the blackened finish helps resist surface effects from typical workshop use. How is the clamp mounted to a fixture plate? Mounting is via the right-angle base; the actuating spindle specification (M6x40) supports straightforward installation into standard fixture plates. What forces can be expected during operation? Expected values are a clamping force up to 1,200 N and a holding force up to 1,400 N, providing consistent performance for assembly and machining tasks. Is a specific arm required for this clamp? No separate arm is required for normal use; the design is supplied for direct integration with a right-angle base and the included spindle. Can the clamp be used for inspection jigs and gauges? Yes, the clamp’s repeatable clamping and safety lock make it well suited to inspection jigs, gauges and other quality-control fixtures. Who supplies the clamp in Europe? Kukamet supplies the clamp; Metav Werkzeuge handles distribution and advice from its Emmerich warehouse. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With Safety Lock, Blackened Finish - Kukamet
Compact, high‑force clamping with a secure safety lock and easy integration into vertical jigs: the combination of 1,200 N clamping power, a safety lock, and a slim black oxide finish delivers reliable repeatability and space‑saving mounting. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 212 — Vertical toggle clamp, 1,200 N, Kukamet The Vertikalspanner 212 is a vertical clamp designed to secure workpieces in jigs and fixtures, offering robust toggle action for consistent holding in production and assembly settings. 1,200 N clamping force 1,400 N holding force Safety lock for secure operation Vertical foot mounting for jigs Consistent clamping that speeds production The vertical toggle design provides a reliable mechanical advantage so that a modest lever movement generates a 1,200 N clamping force with a 1,400 N holding capability. This results in fewer reworks and shorter cycle times when repeated positioning is required. The clamp’s toggle action converts operator input into secure contact pressure, ensuring reproducible clamping force where precision and throughput matter. Safe operation reduces downtime A built‑in safety lock prevents accidental release during handling and machine cycles, lowering the risk of workpiece movement and protecting both components and staff. The locking feature is mechanical and intuitive, reducing training time on new fixtures while maintaining a high level of process safety. The lightweight construction (approx. 0.23 kg) makes manual handling straightforward without sacrificing stability. Simple integration into fixtures and jigs Engineered for straightforward mounting, the clamp uses a vertical foot mounting that sits flush with standard fixture plates and can be secured quickly. Fine adjustment is provided by the M6 x 40 pressure spindle, allowing precise contact distance and repeatable setup. The compact toggle profile helps retain access to adjacent components, making it suitable for dense jig layouts and automated cells. Durable finish for workshop longevity A black oxide finish provides basic corrosion resistance and a low‑glare surface that reduces reflection in close‑tolerance assemblies. The compact metallurgy and construction are tailored for routine industrial use, offering a balance between durability and cost efficiency. The result is a dependable clamp for repetitive production tasks where consistent performance and easy replacement are priorities. Contact Metav Werkzeuge in Emmerich to discuss fixture compatibility and secure delivery of the Kukamet 212 vertical clamp. Technical data Article number: B212-2-L GTIN: 8680731507874 Model: 212 Category: Spanner Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Pressure spindle: M6 x 40 Special features Safety lock Black oxide finish Vertical foot mounting Toggle clamp action FAQ What clamping force does the clamp provide? The clamp delivers a maximum clamping force of 1,200 N, with a holding capability up to 1,400 N, suitable for many assembly and fixturing applications. Is the clamp easy to fit into existing jigs? Yes. The vertical foot mounting and the M6 x 40 pressure spindle allow rapid installation and fine adjustment, making the device straightforward to integrate. Does the clamp include a locking mechanism? The unit features a safety lock that secures the toggle in the clamped position, reducing accidental releases during handling and operation. What is the weight and finish of the clamp? The clamp weighs approximately 0.23 kg and is supplied with a black oxide finish for basic corrosion resistance and low reflectivity. Which SKU should be ordered for this model? Order SKU B212-2-L for the Kukamet vertical clamp, model 212, to ensure the correct configuration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With Safety Lock, Horizontal Foot, Zinc-Plated - Kukamet
Compact galvanised construction and an integrated safety lock provide secure, repeatable clamping up to 1,200 N with a holding force of 1,400 N; take advantage of the small footprint and low weight for flexible jig use. Order the Vertical clamp 211 directly via Metav Werkzeuge or consult our advisors for specification help. Vertical clamp 211 — Kukamet, galvanised with safety lock The Vertical clamp 211 is a compact vertical clamping device for secure fixture on machine tables and jigs, designed for horizontal-foot mounting. Compact galvanised design for corrosion resistance Safety lock for secure, repeatable clamping 1,200 N clamping capacity, 1,400 N holding force Horizontal-foot mounting for stable attachment Reliable clamping for repetitive production tasks The 211 model delivers consistent performance through a defined maximum clamping force of 1,200 N and a maximum holding force of 1,400 N. For production environments where repeatability matters, the combination of compact design and measured clamping values reduces variation during part processing. The safety lock prevents accidental release, supporting safe cycle operation and minimising rework. These measurable specifications serve as a reliable basis for process planning and cycle-time calculation. Fast integration and space-saving fixture design Thanks to the horizontal foot mounting, the unit installs quickly on machine plates or jigs without complex adapters. The small mass of 0.23 kg and the compact footprint make it suited to tight fixture layouts and multi-clamp setups where accessible clamping points are limited. The spindle detail M6x40 enables compatibility with common mounting fasteners, simplifying integration into existing tooling. Reduced set-up time and straightforward mounting contribute directly to higher throughput. Durable materials and low maintenance demands Made from galvanised steel, the clamp is protected against corrosion in typical workshop conditions, extending service intervals and lowering total cost of ownership. The lever-clamp style construction affords robust mechanical advantage while remaining simple to inspect and maintain. Where a dependable, low-maintenance fixture is required, the galvanised finish and mechanical safety features help sustain consistent clamping performance over many cycles. Practical advantages for workshop and light industrial use As a small yet capable clamping solution, this vertical clamp suits assembly benches, test rigs and light machining operations. The defined clamping and holding forces allow straightforward selection for soft to medium workpieces without excessive fixture overdesign. The presence of a mechanical safety lock supports operator confidence during manual handling and semi-automated processes. For operators seeking predictable behaviour and quick retrofit options, the 211 model offers a pragmatic balance of performance and simplicity. Request specification assistance from Metav Werkzeuge to select the Kukamet Vertical clamp 211 for your fixture layout — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for tailored guidance and supply from Emmerich Technical data Article number: 211-2-L GTIN: 8680731501209 Model: 211 Manufacturer: Kukamet Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Spindle: M6x40 eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Safety lock: Yes Type: vertical clamp Storytrigger: lever clamp FAQ What is the maximum clamping force of this vertical clamp? The Vertical clamp 211 from Kukamet provides a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for light industrial fixtures. Can the clamp be mounted on standard machine plates? Yes. The 211 model is designed for horizontal-foot mounting and uses an M6x40 spindle interface for common attachment methods. Is the surface treatment suitable for humid workshop environments? The clamp is galvanised, offering corrosion resistance appropriate for typical workshop conditions and reducing maintenance needs. Does the clamp include a safety mechanism to prevent accidental release? Yes. The Kukamet Vertical clamp 211 is fitted with a built‑in safety lock to secure the clamping position and prevent unintended opening. Which SKU should be referenced when ordering or requesting technical details? Refer to SKU 211-2-L when enquiring about the Kukamet Vertical clamp 211 for precise identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamping Toggle Clamp With 158mm Arm, Zinc Plated, Massive Arm & Safety Lock - Kukamet
Compact galvanised construction with a 1,400 N maximum holding force and an integrated safety lock delivers repeatable, secure clamping for jigs and fixtures. Combine robust performance, low weight and simple mounting for efficient production flow — order the vertical toggle clamp 213 via Metav Werkzeuge or ask our consultants for application advice. Vertical toggle clamp 213 — galvanised, 1,400 N holding force (Kukamet) A Vertical toggle clamp 213 designed for secure vertical clamping on fixtures and jigs, ready for angled-foot mounting in demanding workshop and assembly environments Robust galvanised steel construction 1,400 N maximum holding force Massive holding arm with safety lock Angled foot for secure mounting Consistent clamping that reduces rework and downtime The combination of a 1,400 N holding force and a 1,200 N pressing rating ensures reliable retention of workpieces during machining, welding and assembly. The toggle-style mechanism converts operator input into high clamping stability, reducing part movement and resulting in fewer rejects and less rework. This performance-oriented design supports efficient production sequences and shorter cycle times by maintaining repeatable fixture positioning, which is particularly valuable where consistent tolerances are required. Space-efficient design for quick integration into fixtures With a 158 mm arm and a compact footprint, the clamp integrates easily into bespoke jigs or standard fixtures without adding unnecessary bulk. The galvanised finish provides basic corrosion resistance, making the component suitable for workshop atmospheres and light industrial environments. At just 0.24 kg, the clamp is lightweight enough to be mounted on moveable fixtures while still providing the rigidity expected from heavier units, simplifying handling and reducing load on fixture frames. Built for durability and operator safety The massive holding arm and integrated safety lock safeguard clamped components and limit accidental release during operations that generate vibration or side loads. The angled-foot mounting provides a secure attachment point to fixture plates and baseframes, increasing shear resistance under load. Constructed for low maintenance, the mechanism requires only periodic inspection and lubrication to retain full functionality, supporting long service intervals and dependable daily use. Specify the Kukamet 213 vertical toggle clamp via Metav Werkzeuge for robust, repeatable clamping; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored selection and technical guidance Technical Data Article number: 213-2-D-L-C3 GTIN: 8680731501926 ECLASS: 21041717 ETIM: EC011973 Facts Maximum holding force: 1,400 N Maximum pressing force: 1,200 N Arm length: 158 mm Weight: 0.24 kg Special features Galvanised material Angled-foot mounting Massive holding arm Safety locking mechanism Toggle clamp type FAQ What materials can be clamped safely with this device? The vertical toggle clamp 213 secures a wide range of workpieces; the galvanised steel construction provides robust clamping for common metals and components used in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is achieved via the angled foot supplied; the clamp fastens to a baseplate or fixture frame using standard fasteners suited to the application. Is the safety lock suitable for continuous production use? Yes, the integrated safety lock prevents unintended release during operations with vibration and intermittent loading, supporting continuous production routines. What maintenance does the clamp require to remain reliable? Periodic inspection and light lubrication of the pivot points are recommended to maintain the toggle mechanism and the locking function in long-term use. Can this clamp be used in mobile or lightweight fixtures? Given its low weight and compact dimensions, the clamp is suitable for integration into moveable fixtures and portable assemblies where secure, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Clamping Toggle Latch With Metal Handle, Horizontal Foot Mount - Kukamet
Benefit from the combination of robust stainless-steel construction, a horizontal-foot mounting for simple installation and a reliable holding force of 1,200 N for consistent clamping performance. Order the toggle latch 361 directly via Metav Werkzeuge or ask our consultants if needed. Toggle latch 361 – stainless-steel closure clamp with horizontal foot and hook (Kukamet) Toggle latch 361 is a compact stainless-steel closure clamp designed for secure fastening tasks in production, assembly and workshop fixtures where a horizontal base is required. Stainless steel construction Horizontal-foot mounting Holding force 1,200 N Metal handle with hook Proven holding performance for repetitive clamping The toggle latch delivers dependable mechanical performance thanks to a holding force of 1,200 N and a maximum pressing force of 1,000 N, values that translate into secure retention under vibration and repeated cycles. These figures make the component suitable for medium-duty fixtures and transport closures where consistent clamp force is essential. The relation between pressing and holding forces ensures that components remain fastened without overloading the actuator, supporting predictable work processes and minimising rework. Simple mounting and precise adjustment save assembly time Equipped with a horizontal foot for fixed-base attachment and a thread length of 23 mm, the clamp can be mounted and adjusted quickly on sheet frames or jig plates. The compact design and a weight of approximately 55 g make the unit unobtrusive in tight assemblies while enabling quick alignment. The integrated hook and metal handle provide positive engagement and tactile feedback during operation, reducing the need for secondary locking and simplifying operator routines on the shop floor. Corrosion-resistant material and low-maintenance operation Constructed from stainless steel, the closure clamp resists corrosion and withstands humid or mildly corrosive environments common in industrial workshops. This material choice reduces the need for frequent replacement and supports long service life, contributing to an efficient parts inventory and fewer production stops. The latch’s simple mechanical principle means only routine inspection is required; worn items are identified visually and replaced without specialised tools, keeping maintenance straightforward for engineering teams. Contact Metav Werkzeuge for technical advice on applying the Kukamet toggle latch 361 in production fixtures and to arrange delivery from our Emmerich warehouse Technical data SKU: S361-1 GTIN: 8682843523346 Manufacturer: Kukamet Facts Weight: 0.055 kg Holding force: 1,200 N Pressing force: 1,000 N Thread length: 23 mm Special features Material: stainless steel Mounting: horizontal foot Handle: metal With hook: yes eClass: 21041718 ETIM: EC011973 FAQ What is the maximum holding force of this latch? The latch provides a holding force of 1,200 N, giving reliable retention for medium-duty fastening applications. Is the latch suitable for outdoor use? Made from stainless steel, the latch resists corrosion and is suitable for environments with moderate humidity and exposure; extreme marine conditions may require additional protection. How is the latch mounted to a fixture? The latch uses a horizontal-foot mounting arrangement and a 23 mm thread length for secure fastening to jig plates or frames. Can the metal handle accommodate repeated manual operation? Yes, the metal handle is designed for repetitive use and provides positive engagement together with the integrated hook. Which SKU should be ordered for this model? Order SKU S361-1 for this specific toggle latch model Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Toggle Clamp Horizontal Base, Metal Handle, Zinc Plated, 23mm Thread Length - Kukamet
Take advantage of a compact, galvanised toggle clamp that combines a high holding force with a sturdy metal handle for reliable fixturing; order the part directly via Metav Werkzeuge or consult the Metav team for specification support. Verschlussspanner 361 – Horizontal-foot toggle clamp, galvanised (Kukamet) Verschlussspanner 361 is a durable closure clamp designed for repetitive locking and secure fixtures in workshop and light industrial applications. Horizontal-foot for firm mounting Galvanised finish for corrosion resistance Metal handle for durable operation Consistent clamping performance for repeatable processes Built for repeated use, this toggle clamp delivers measurable force values that support predictable results. With a maximum pressing force of 1000 N and a holding force of 1200 N, the device provides the technical basis for secure workholding during assembly or light machining. The horizontal base plate ensures stable mounting on jigs or fixtures, reducing slippage and aligning with common workshop setups. The mechanical action converts handle movement into firm clamping pressure, allowing quick engagement and disengagement while maintaining repeatability. Compact design that speeds up installation and handling The compact dimensions and low mass make the clamp simple to integrate into existing tooling without adding unnecessary bulk. A thread length of 23 mm permits straightforward adjustment and fine positioning of the clamping point, while the overall weight of 0.055 kg keeps the unit unobtrusive on fixtures. The built-in hook option enables flexible anchoring positions, and the horizontal-foot arrangement aligns with standard mounting holes, cutting installation time and enabling fast changeovers on production or test benches. Corrosion resistance and robust grip for long service life Plated with a galvanised finish, the clamp resists surface corrosion in standard workshop environments, extending service intervals and lowering replacement frequency. The metal handle increases wear resistance compared with plastic alternatives and ensures tactile stability when operating the lever. These material choices translate into long-term economy: less downtime for maintenance and fewer unexpected part failures. For tasks where a secure mechanical latch is key, the combination of finish and construction contributes directly to operational reliability. Suitable applications and straightforward selection This closure latch is suitable for general fixturing, assembly work and light clamping tasks on standard materials. The hardware’s clear numeric specifications make it simple to compare with other clamping elements when designing production tooling. The galvanised surface and metal handle make the component appropriate for workshop environments where occasional exposure and frequent handling occur. When selecting clamping elements, prioritise match between the required holding force and the stated 1200 N retention capability to ensure safe and effective fixation. Contact Metav Werkzeuge for a technical consultation or to request the detailed product sheet for the Kukamet toggle clamp 361; assistance is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 361-1 GTIN: 8682843521076 SKU: 361-1 ECLASS: 21041718 ETIM: EC011973 Facts Maximum pressing force: 1000 N Maximum holding force: 1200 N Thread length: 23 mm Weight: 0.055 kg Special features Material: galvanised Mounting: horizontal foot Handle: metal handle With hook: yes FAQ What is the main clamping force of this toggle clamp? The Kukamet Verschlussspanner 361 provides a maximum pressing force of 1000 N and a holding force of 1200 N, suitable for light industrial and workshop fixtures. Is the clamp suitable for outdoor or humid environments? The galvanised finish on the closure clamp increases corrosion resistance, making it appropriate for standard workshop conditions; extreme outdoor exposure may require additional protection. How is the unit mounted to a fixture? Mounting is via a horizontal foot plate designed for secure attachment to jigs and fixture plates; the horizontal-foot arrangement matches common mounting patterns. Does the clamp include an adjustable spindle? Yes, the clamp includes an adjustable threaded spindle with a thread length of 23 mm for fine positioning of the clamping point. Which materials is the clamp intended to hold? The clamp is intended for general fixturing and assembly tasks on common workshop materials; verify that the stated holding force meets the application’s requirements before selection. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp Horizontal Base Zinc-Plated, M6x40 Spindle, 1400N Hold Force - Kukamet
Reliable clamping for everyday production: galvanised construction combined with a maximum 1,200 N clamping force and 1,400 N holding force ensures secure fixation and repeatable results. Lightweight at 0.23 kg and fitted with a horizontal base for compact mounting, the unit supports efficient setup and handling. Order the vertical clamp directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Vertikalspanner 211 – Vertical clamp with galvanised finish and M6x40 spindle (Kukamet) The Vertikalspanner 211 is a compact vertical clamping device designed for shop fixtures and production jigs, offering a space-saving mounting option and clear mechanical data for reliable workholding in repetitive tasks. Galvanised steel construction Max clamping force 1,200 N Holding force 1,400 N Horizontal base mounting Secure fixation with measurable force and corrosion protection The 211 delivers a defined 1,200 N clamping force and a 1,400 N holding force, values that translate directly into repeatable part security on fixtures and jigs. The difference between clamping and holding force is reflected in the device’s mechanical design: the clamping (actuating) force determines how firmly a workpiece is engaged, while the holding force indicates resistance to displacement under load. The galvanised finish provides a practical degree of corrosion resistance for workshop environments, reducing the need for frequent surface maintenance and supporting long-term dimensional stability of the clamped assembly. The pressure spindle is specified as M6x40, a common thread size that simplifies integration with standard tooling and retainer plates. Fast, flexible mounting that reduces set-up times Fitted with a horizontal base, this vertical clamp is intended for low-profile installation where tabletop or fixture-plate mounting is required. The compact footprint and lightweight 0.23 kg construction make repositioning and fixture reconfiguration quicker and less demanding on assembly staff, which in turn shortens set-up cycles on small- to medium-batch production runs. Absence of an extended arm keeps the working area clear and reduces collision risk during automated or manual operations. For applications requiring straightforward mechanical clamping without additional kinematics, the clamping device offers a pragmatic balance of size, force and repeatability. Robust design for consistent production results Constructed from galvanised steel, the clamping unit prioritises durability and dependable surface protection in typical industrial settings. The mechanical simplicity—clear specification of clamping and holding forces, a standard pressure spindle and a horizontal foot—translates into predictable behaviour during repeated cycles, which benefits quality control and fixture standardisation. Where process stability and traceability are important, the measurable performance figures enable planning for fixture loads and support risk assessments. The compact form factor supports integration into bespoke jigs or modular clamping systems without extensive redesign. Choose Kukamet’s Vertikalspanner 211 for dependable, space-saving workholding — contact Metav Werkzeuge in Emmerich for ordering or tailored application advice. Technical data Article number: 211-2 Model: 211 GTIN: 8680731501131 Manufacturer: Kukamet Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Pressure spindle: M6x40 Special features Material: galvanised Mounting: horizontal base Arm: not applicable Special feature: none FAQ What is the maximum clamping force of this vertical clamp? The maximum clamping force is 1,200 N as specified for the Vertikalspanner 211 from Kukamet. How is the clamping unit mounted to a fixture plate? Mounting is via the horizontal base; the design suits direct bolting to plates or modular fixture components. What thread is used for the pressure spindle? The pressure spindle is M6x40, a standard thread length and diameter for straightforward integration. Is the clamping device resistant to corrosion? Yes, the unit is galvanised, providing a protective coating suitable for general workshop conditions. What is the weight and how does that affect handling? The device weighs 0.23 kg, which facilitates easy repositioning and reduces the effort required during fixture setup. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp Stainless Steel Vertical Base, 1400N Holding Force - Kukamet
Take advantage of robust clamping performance combined with corrosion-resistant construction and compact installation for reliable fixture security. Benefit from a stainless steel build, 1,200 N clamping force and a vertical-foot mounting that keeps fixtures steady. Order directly via Metav Werkzeuge or consult the team for integration advice. Vertical clamp 212 – Kukamet vertical clamp, stainless steel, 1,200 N Vertical clamp 212 is a compact vertical clamping device designed for secure workholding in light to medium-duty assembly and workshop fixtures. Stainless steel for long service life Max clamping force 1,200 N Holding force up to 1,400 N Vertical-foot mounting, compact 0.23 kg Consistent, measurable clamping for reliable production The Vertical clamp 212 delivers a reproducible clamping action with a rated clamping force of 1,200 N and a holding force up to 1,400 N, providing measurable security for repeat operations. These force figures translate into stable fixtures during machining or assembly cycles, reducing rework and stoppages. The mechanism uses a threaded pressure spindle (M6x40) that permits fine adjustment of contact pressure; this feature allows integrators to set secure but non-damaging forces for delicate components. Specified values support planning for process forces and enable straightforward comparison with other workholding components. Space-saving mounting and quick integration into fixtures A vertical-foot mounting design simplifies attachment to plates and subplates and minimises the clamp’s footprint on the work surface. At 0.23 kg the unit is lightweight yet dimensionally stable, which aids in compact fixture layout and easier handling during assembly. The integrated M6x40 pressure spindle provides a standardised interface for contact and adjustment, enabling rapid adaptation to different workpiece heights without additional adapters. Where fixture density is a concern, the clamp’s compact profile helps maintain accessibility while keeping clamping elements out of the tool path. Durable materials and low-maintenance operation Constructed from stainless steel, the clamp resists corrosion and preserves surface finishes in workshop environments, reducing maintenance intervals and part replacement. The absence of special surface treatments or coatings simplifies cleaning and inspection routines, while the straightforward lever-type mechanism supports long service life under regular use. As part of Kukamet’s product range, this clamp is suitable for environments where hygiene or minimal contamination risk is desired, for example in light manufacturing and precision assembly lines. For secure, corrosion-resistant clamping with Kukamet precision, contact Metav Werkzeuge in Emmerich for ordering, technical advice or integration assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S212-2 GTIN: 8680731509205 Model: 212 Manufacturer: Kukamet Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Pressure spindle: M6x40 eClass: 21041717 ETIM: EC011973 Special features Material: Stainless steel Mounting: Vertical-foot Type: Lever clamp Special features: None FAQ What clamping and holding forces are specified for this clamp? The Vertical clamp 212 provides a clamping force of 1,200 N and a holding force up to 1,400 N, which makes the Kukamet S212-2 suitable for light to medium-duty fixture tasks. Is the clamp suitable for use in humid or corrosive workshop conditions? Yes, the clamp’s stainless steel construction gives the Vertical clamp 212 good resistance to corrosion, reducing maintenance and preserving function in demanding environments. How is the clamp mounted to a fixture plate? The device uses a vertical-foot mounting that allows the clamp to be secured upright to plates or subplates, enabling compact fixture designs and straightforward installation. What adjustment options are available for contact pressure? Adjustment is achieved via the M6x40 pressure spindle specified for the Vertical clamp 212, allowing precise setting of contact pressure to suit the workpiece. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp Three-Point With Massive Holding Arm And Safety Lock, Blackened - Kukamet
Robust, compact clamping for repeatable production: the Vertical toggle clamp 211 combines a 162 mm arm with a horizontal foot for stable bench mounting and a safety locking mechanism that secures workpieces under dynamic loads. With up to 1,400 N holding force and a 1,200 N clamping force, the device supports reliable cycle performance. Order the Vertical toggle clamp 211 directly via Metav Werkzeuge or consult the Metav team for technical advice. Vertical toggle clamp 211 – 162 mm arm, horizontal foot (Kukamet) The Vertical toggle clamp 211 is a compact vertical clamp designed for secure workholding in assembly, jigs and fixtures, and light production tasks. 162 mm robust holding arm Horizontal foot for bench mounting Safety locking for secure clamping Consistent clamping for assembly and fixtures The toggle clamp provides a consistent clamping action thanks to its lever geometry and safety locking. The defined mechanical travel and firm retention deliver a repeatable hold, which reduces rework and shortens setup times in repetitive assembly or small-series production. The 1,200 N clamping force converts to reliable contact pressure on the workpiece, while the 1,400 N holding force prevents unintended release during handling or vibration. This makes the clamp suitable where process reliability is essential rather than heavy machining. Space-saving construction with robust components A low-profile design combined with a 162 mm arm and a horizontal foot enables mounting on benches, fixture plates or jig bases with limited space. The body has a blackened finish, reducing glare and providing a corrosion-resistant surface in benign workshop environments. Weighing 0.235 kg, the unit adds minimal mass to moving assemblies and is easy to integrate into existing tooling. The presence of a massive holding arm improves leverage and increases long-term mechanical stability under frequent cycling. Safe, fast operation with minimal maintenance Operation is straightforward: the lever action permits rapid opening and closing, while the safety locking feature secures the clamp in its closed position to prevent accidental release. The simple mechanical construction minimises service needs; occasional inspection and light lubrication keep performance consistent. The clamp’s compact design supports ergonomic handling during fixture changes and helps maintain throughput in fast-paced production environments, offering a pragmatic balance between durability and usability. For a dependable, compact workholding solution, choose the Kukamet Vertical toggle clamp 211 and contact Metav Werkzeuge for expert advice and secure supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-2-D-L-C3 Manufacturer: Kukamet SKU: B211-2-D-L-C3 Facts Arm length: 162 mm Maximum clamping force: 1,200 N Maximum holding force: 1,400 N Weight: 0.235 kg eClass: 21041717 ETIM: EC011973 Special features Material / finish: blackened finish Mounting: horizontal foot Massive holding arm Safety locking mechanism Model designation: 211 Category: Spanner FAQ What clamping and holding forces does this clamp provide? The Vertical toggle clamp 211 offers a maximum clamping force of 1,200 N and a maximum holding force of 1,400 N, providing secure retention for assembly and fixturing tasks. How is the clamp mounted? Mounting is via a horizontal foot designed for bench or fixture plate installation; the horizontal-foot configuration suits compact setups and jig bases. What is the arm length and why does it matter? The arm length is 162 mm; this provides a balance between reach and leverage, enabling secure clamping without excessive protrusion from the fixture. What surface finish does the clamp have and how does this affect use? The unit has a blackened finish which reduces surface glare and offers basic corrosion resistance suitable for general workshop conditions. Is the clamp suitable for frequent production use? Yes. The 211 model’s robust arm, safety locking and mechanical design support repetitive cycle use in light to medium production environments; regular inspection and light maintenance keep it performing reliably. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With 108mm Arm, Massive Holding Arm & Safety Lock, Zinc-Plated - Kukamet
Take advantage of a galvanised construction and 1,200 N clamping force combined with a massive holding arm and safety lock for reliable fixture security in production and workshop environments; order the vertical clamp directly via Metav Werkzeuge or consult our technical team for application advice. 213 Vertical Clamp by Kukamet — galvanised, 1,200 N clamping force The 213 vertical clamp secures workpieces vertically with a robust holding arm and integrated safety lock, suited to jigs, fixtures and clamping stations in workshops and light production. Solid holding arm with safety lock Galvanised finish for corrosion resistance 108 mm reach with angled mounting foot 1,200 N clamping force, 1,400 N holding force Dependable clamping for daily workshop use The vertical clamp is designed to provide a clear benefit for routine fixture tasks: consistent clamping force and a secure locking mechanism reduce rework and minimise setup time. The galvanised surface gives added resistance against corrosion where humidity or coolant contact is likely, so the device maintains performance over time. With a compact reach of 108 mm from the mounting point, the unit integrates well into confined fixture layouts while the relatively low mass supports modular jigs without unnecessary additional weight. Built for repeatability and operator confidence A massive holding arm and a positive safety lock keep the workpiece engaged during machining or assembly, reducing the risk of movement under load. The specification shows a maximum clamping force of 1,200 N and a holding capability of 1,400 N, values that translate directly into handling small to medium components with predictable behaviour. The clamp’s angled mounting foot enables secure attachment to plates or tooling blocks, simplifying alignment and ensuring repeatable positioning across multiple stations. Practical installation and compatibility notes Installation is straightforward: the angled foot allows fixed attachment to horizontal or slightly inclined surfaces commonly used in production fixtures. The galvanised construction balances sturdiness with corrosion protection while keeping the unit lightweight for flexible use in mobile or small-bench setups. For integration into existing jigs, note the compact overall profile and the lightweight character, which helps maintain low inertia on moving assemblies; the device pairs well with standard fixture hardware and quick-change systems. For secure, repeatable clamping backed by Kukamet quality, contact Metav Werkzeuge to discuss suitability for specific fixtures or to request the SKU 213-2-D-L-C2 for procurement. Technical data Article number: 213-2-D-L-C2 GTIN: 8680731501919 Manufacturer: Kukamet Numbers / Core specifications Arm length: 108 mm Weight: 0.24 kg Maximum clamping force: 1,200 N Maximum holding force: 1,400 N eClass: 21041717 ETIM: EC011973 Designs / Special features Material: galvanised Mounting: angled mounting foot Special features: massive holding arm and safety lock Category: Spanner FAQ Which materials can be clamped with this device? The vertical clamp is suitable for a wide range of workshop materials; its galvanised construction and stated clamping/holding forces make the 213 appropriate for typical metal and mixed-material fixtures used in light production. How is the clamp mounted to a fixture plate? Mounting is via the angled mounting foot supplied with the unit; the foot is designed for secure bolting to horizontal or slightly inclined fixture plates in jigs and tooling assemblies. What do the clamping and holding force values indicate? The specified 1,200 N clamping force refers to the active force applied when the clamp is engaged; the 1,400 N holding force describes the static resistance to movement once the safety lock is engaged. Is the model suitable for repeated daily use in a production environment? Yes. The combination of a massive holding arm, safety lock and galvanised finish is intended to provide repeatable performance and corrosion protection suitable for routine production or workshop applications. Can the SKU be referenced for ordering or technical queries? For procurement or precise application checks, reference SKU 213-2-D-L-C2 when contacting Metav Werkzeuge or specifying the clamp in ordering documents. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With 158mm Arm, Massive Holding Arm And Safety Locking - Kukamet
Reliable vertical clamping with 1,200 N clamping force and a massive holding arm ensures secure fixtures and steady production. The compact angle-base mount and blackened finish combine durability with space-saving installation — order directly via Metav Werkzeuge or consult our specialists for precise application advice. Vertikalspanner 213 — Vertical toggle clamp, 1,200 N clamping force (Kukamet) The Vertikalspanner 213 is a vertical toggle clamp designed for secure workpiece retention in jigs, fixtures and assembly processes across workshops and light industrial lines Robust massiver Haltearm and safety lock 1,200 N clamping force with 1,400 N holding force Angle-base mounting for compact fixture integration Blackened finish for wear resistance and corrosion protection High-performance clamping for efficient production The clamp delivers a consistent 1,200 N clamping action and a measured 1,400 N retaining force, translating into reliable repeatability during batch work and assembly operations. The toggle mechanism converts short lever movement into strong clamping pressure, making setup faster and reducing cycle time — a clear benefit when throughput and stability matter. The massive holding arm gives a high moment resistance, which maintains alignment in fixtures and minimises rework. Space-saving mount that simplifies jig design With an angle-base mounting, the device integrates into tight fixture assemblies and on vertical or horizontal mounting plates without added bulk. The 158 mm arm reach is sufficient for common clamping depths while keeping the overall footprint small; at 0.24 kg the component adds negligible mass to portable fixtures. This compact architecture supports efficient workstation layouts and streamlines tool-change procedures without sacrificing holding power. Built for safety and long service life Safety is supported by a positive safety lock that secures the lever in the clamped position, preventing accidental release during handling. The blackened finish provides a protective layer against wear and light corrosion, extending service intervals and reducing lifecycle costs. For applications where consistent holding and operator safety are priorities, this clamp offers a durable combination of mechanical robustness and practical protection. Practical benefits for workshop and assembly use The clamp is especially suitable for fixtures in welding preparation, mechanical assembly and small-batch machining where a repeatable vertical hold is required. The simple lever action requires minimal training, while the robust construction supports long-term, low-maintenance operation. Clear numeric specifications help engineers verify integration: rated clamping and holding forces and a defined arm length facilitate fixture calculations and safety assessments. For tailored procurement or to discuss integration of this Kukamet clamp into specific jigs and fixtures, contact Metav Werkzeuge for technical guidance and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B213-2-D-L-C3 Manufacturer: Kukamet Clamping force (max): 1,200 N Holding force (max): 1,400 N Arm length: 158 mm Weight: 0.24 kg eClass: 21041717 ETIM: EC011973 Mounting type: Angle base Finish: Blackened Massive holding arm Safety lock Material appearance: Blackened/brüniert FAQ What clamping and holding forces does this clamp provide? The Vertikalspanner 213 provides a clamping force of 1,200 N and a holding force of 1,400 N, suitable for reliable fixture retention in light industrial applications. Can the clamp be mounted on vertical plates and compact fixtures? Yes, the angle-base mounting on the Vertikalspanner 213 allows compact integration on vertical and horizontal plates, aiding space-efficient jig design. Is the clamp suitable for repetitive production cycles? The Kukamet vertical toggle clamp B213-2-D-L-C3 is designed for repetitive use; its massive holding arm and safety lock support repeatability and operator safety in batch processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Horizontal Base, Massive Holding Arm & Safety Lock, Zinc Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a galvanised finish, a 162 mm heavy-duty arm and a 1,400 N holding force to secure workpieces reliably; order the clamp direct via Metav Werkzeuge or consult Metav's specialists for specification support. Vertical clamp 211 — galvanised vertical clamp with safety lock (Kukamet) A Vertical clamp 211 engineered for secure vertical holding in jigs and fixtures, featuring a horizontal mounting foot, robust holding arm and integrated safety lock for repetitive production tasks Galvanised steel construction 162 mm heavy-duty arm 1,400 N maximum holding force Horizontal mounting foot, safety lock Consistent clamping for repetitive production The clamp delivers a clearly defined holding force of 1,400 N while the maximum pressing force is 1,200 N, providing predictable performance for series production and fixture work. These figures describe the static retention and the applied clamp pressure respectively; engineers can rely on the values when designing fixture loads or selecting complementary locating elements. The compact, repeatable action of the lever-style clamping mechanism reduces set-up time and supports consistent part quality across batches. Durability where workshop conditions matter Constructed from galvanised steel and fitted with a heavy-duty arm, the unit resists corrosion and mechanical wear typical in industrial environments. The massive arm and robust joints reduce flex under load, extending service intervals and lowering lifetime maintenance needs. Lightweight at just 0.235 kg, the clamp offers longevity without adding significant mass to assemblies, enabling durable performance in both production lines and mobile jig applications. Simple integration into fixtures and tooling The horizontal mounting foot provides a compact interface for direct attachment to plates and frames, simplifying integration into existing jigs. With an arm length of 162 mm, the geometry suits raised or recessed clamping points while keeping the actuation path accessible. The lever clamp design supports rapid manual operation and straightforward bench or fixture mounting; measured values support CAD integration and ensure correct spacing and bolt selection during installation. Enhanced safety and targeted applications Equipped with a safety lock, the clamp prevents unintended release under vibration or incidental contact, increasing process safety in repetitive handling operations. As a lever-type clamp, it is suitable for woodworking jigs, metalworking fixtures and general workshop applications where vertical holding and quick manual actuation are required. The combination of secure locking and defined force ratings makes it a pragmatic choice for assembly tasks where consistent clamping and operator safety are priorities. Choose the Kukamet vertical clamp 211 for robust, repeatable clamping and contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 211-2-D-L-C3 GTIN: 8680731501193 SKU: 211-2-D-L-C3 Facts Arm length: 162 mm Maximum holding force: 1,400 N Maximum pressing force: 1,200 N Weight: 0.235 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: Galvanised Mounting: Horizontal mounting foot Massive holding arm Safety lock Clamping type: lever clamp Brand: Kukamet FAQ What load capacity does the clamp provide? The Vertical clamp 211 offers a maximum holding force of 1,400 N and a pressing force of 1,200 N, values suitable for many fixture and assembly tasks. Which materials is the clamp suitable for? The galvanised construction and lever clamping make the clamp suitable for general workshop applications including metal and wood fixtures; selection should be based on specific fixture geometry and applied loads. How is the clamp mounted? The unit mounts via a horizontal mounting foot designed for direct attachment to plates or frames; arm geometry of 162 mm assists in aligning clamping action with component geometry. Does the clamp include a locking mechanism? Yes, the clamp features an integrated safety lock to prevent unintended release under vibration or incidental contact. Is the clamp lightweight enough for mobile jig use? At 0.235 kg the clamp is compact and light, enabling use in mobile or modular jig systems without significantly increasing assembly mass. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Safety Lock, Angle Base, Zinc-Plated - Kukamet
Take advantage of the combination of compact design, robust holding power and an integrated safety lock for reliable fixture work; order the clamp directly via Metav Werkzeuge or request technical advice from our consultants. Vertikalspanner 213 – Vertical clamp with safety lock and angled base (Kukamet) The Vertikalspanner 213 is a vertical clamping device for general workshop and light industrial fixturing, designed to secure workpieces where rapid, repeatable clamping and a secure locked position are required. Zinc-plated corrosion protection 1,200 N maximum clamping force 1,400 N holding force Safety lock for secure clamping Consistent clamping performance for precise setups The vertical clamp delivers a defined 1,200 N clamping force with a 1,400 N holding force, providing measurable retention for routine fixture work. These figures indicate the device’s capacity to press and hold components during machining or assembly; the clamping force relates to the pressure applied by the spindle, while the holding force denotes the secure retention once the lock engages. The compact, lightweight construction contributes to rapid fixture changes and reduces inertia on adjustable tooling plates, supporting efficient changeovers in small-batch production. Robust construction and mounting for workshop durability Finished with a zinc-plated coating, the unit resists corrosion and is suitable for workshop environments where humidity or coolant exposure is present. The clamp is supplied with an angled base (Winkelfuß) which permits flexible mounting orientations and straightforward integration into existing fixture plates. The M6×40 pressure spindle provides a standard threaded contact for direct application of force, and the integrated safety lock prevents accidental release under vibration or shock, reducing the risk of workpiece displacement during processing. Practical benefits for supply and maintenance planning Weighing just 0.265 kg, the clamp is easy to handle during jig assembly and replacement cycles, while its simple design minimises maintenance requirements. The device’s straightforward mechanism supports easy inspection and replacement of wear items if necessary, which helps maintain uptime. As part of a broader clamping strategy, this vertical clamp from Kukamet suits workshops and trade operations seeking reliable, repeatable fixturing without complex adjustment procedures. Secure reliable clamping with the Kukamet Vertikalspanner 213—contact Metav Werkzeuge for technical guidance or to arrange supply from our Emmerich hub Technical Data Article number: 213-2-L GTIN: 8680731501933 Brand: Kukamet Material: Zinc-plated Mounting: Angled base Pressure spindle: M6×40 Safety lock: Yes Facts Maximum clamping force: 1,200 N Maximum holding force: 1,400 N Weight: 0.265 kg eClass: 21041717 ETIM: EC011973 Special features Safety locking mechanism Angled-foot mounting Category: Spanner FAQ What clamping and holding forces does the Vertikalspanner 213 provide? The Vertikalspanner 213 delivers a maximum clamping force of 1,200 N and a holding force of 1,400 N, values that define its capability to press and securely retain workpieces during processing. Which mounting option is supplied with this clamp? The clamp is supplied with an angled base for flexible mounting on fixture plates and jigs, enabling varied orientation in assembly and machining setups. What is the pressure spindle specification on this vertical clamp? This vertical clamp features an M6×40 pressure spindle, a standard threaded contact for transmitting the clamping force to the workpiece. Is the clamp corrosion-resistant for workshop environments? The Vertikalspanner 213 has a zinc-plated finish that provides corrosion resistance suitable for typical workshop and light industrial conditions. Does the unit include a safety mechanism to prevent accidental release? Yes, the device incorporates a safety lock to secure the clamped position and reduce the risk of accidental release under vibration or impact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Safety Lock, Horizontal Foot Mount, Blackened Finish - Kukamet
Take advantage of the combination of compact design, robust safety locking and straightforward integration for reliable fixture clamping; order directly via Metav Werkzeuge or consult our specialists for application support. Vertikalspanner 211 — vertical clamp with horizontal foot and safety lock (Kukamet) Vertikalspanner 211 delivers secure vertical clamping for fixtures and jig assemblies, featuring a horizontal foot for plate mounting and an integrated safety lock for repeatable, safe operation. Integrated safety lock Horizontal foot mounting Max clamping force 1,400 N Compact weight 0.23 kg Consistent clamping performance that supports production flow The vertical clamp offers defined 1,200 N pressing force and a 1,400 N maximum holding capacity, values that translate into dependable workpiece restraint during machining and assembly cycles. The clamping spindle is specified as M6x40, which enables standardised fastening into fixture plates and adapters; this thread dimension also simplifies replacement or retrofit into existing setups. By specifying forces in newtons, engineers gain an objective basis for matching the clamp to expected process loads, reducing the risk of vibration-induced movement and rework. The result is a component that supports steady throughput and predictable results in repetitive production tasks. Low mass and robust finish for long service life A blackened (blued) finish provides corrosion resistance and reduces reflected glare at the workbench, while the unit’s 0.23 kg mass and compact footprint simplify handling and positioning in tight fixtures. The built-in safety lock prevents unintended release under vibration or incidental contact, contributing to operator safety and avoiding clamp-related downtime. These design choices lower maintenance needs and extend service intervals; where replacement is required, the small mass keeps logistics and handling straightforward, particularly for benchtop and light-duty fixture applications. Integration made simple for jigs and fixtures The clamp’s horizontal foot mounting orientation is optimised for plate-mounted jigs and multi-axis fixtures, allowing the clamp to be bolted flat and provide vertical restraint from above. The product’s compact design and standard spindle thread make it suitable for retrofitting into existing clamping arrays and for modular fixture construction. Identification for procurement and inventory is straightforward with SKU B211-2-L and GTIN available in the technical data; traceable components support quality assurance and spare-part management in production environments. Technical enquiries are supported by Metav’s product specialists for correct specification and integration guidance. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertikalspanner 211 into your fixtures; our specialists in Emmerich will assist with application details and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: B211-2-L GTIN: 8680731507683 eClass: 21041717 ETIM: EC011973 Core specifications Max pressing force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Spindle thread: M6x40 Features & materials Mounting: horizontal foot Safety lock present Finish: blackened (blued) Category: Clamps FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet Vertikalspanner 211 specifies a pressing force of 1,200 N and a maximum holding force of 1,400 N, giving a clear load range for fixture planning. How is the clamp mounted to a jig or plate? Mounting is via a horizontal foot intended for bolting to fixture plates; the clamping spindle is M6x40 for standardised attachment. Does the clamp include a safety feature to prevent accidental release? Yes, the unit is fitted with an integrated safety lock to avoid unintended opening under vibration or impact. What finish and durability characteristics does the clamp have? The clamp is supplied with a blackened (blued) finish that improves corrosion resistance and reduces surface glare in workshop environments. Which SKU should be referenced when ordering spares or replacements? Use SKU B211-2-L for ordering and inventory to ensure the correct vertical clamp configuration is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Safety Lock, Stainless Steel, M6x40 Spindle - Kukamet
The combination of stainless-steel construction, an integrated safety lock and a compact vertical mounting makes this clamp a reliable choice for production fixtures where secure, repeatable holding is essential. Order the clamp directly via Metav Werkzeuge or consult the technical team for specification support. Kukamet Vertical toggle clamp 212 – stainless-steel vertical clamp, 1,200 N clamping force The Vertical toggle clamp 212 is a compact vertical clamp designed for secure fixture holding in assembly and machining jigs, combining corrosion resistance with a user-friendly safety lock. Stainless-steel construction Integrated safety lock Up to 1,200 N clamping force Vertical-foot mounting Secure, measurable clamping for production use The clamp delivers a clearly defined clamping action with a nominal clamping force of 1,200 N and a maximum holding force of 1,400 N, providing a measurable basis for fixture design and cycle planning. These figures allow engineers to calculate the required number and position of clamps for safe workholding, reducing the risk of part movement during machining. The safety lock prevents unintended release during handling or vibration, improving process reliability and worker safety while maintaining a short actuation travel typical for lever-style clamps. Compact footprint that integrates into tight jigs A vertical mounting foot and a lightweight build mean the device occupies minimal space on the fixture plate while contributing little mass to the assembly. With a unit weight of 0.23 kg, the clamp is suitable for portable fixtures and multi-station assemblies where low inertia is an advantage. The vertical-foot configuration enables straightforward integration into standard tooling plates and can be combined with locating pins and fasteners without complex rework, simplifying retrofits and new jig designs. Durable materials and straightforward operation for low upkeep Constructed from stainless steel, the clamp resists corrosion in workshop conditions and is suited to environments where longevity and low maintenance are priorities. The lever mechanism is designed for frequent operation and, together with the integrated lock, minimises accidental adjustments. As a lever-style clamp it offers tactile feedback and a clear open/locked state, which supports visual inspection routines and contributes to predictable cycle times in series production. Contact Metav Werkzeuge for advice on integrating Kukamet’s vertical toggle clamp 212 into existing fixtures or for order enquiries; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S212-2-L GTIN: 8680731509212 Manufacturer: Kukamet Material: Stainless steel SKU: S212-2-L Facts Clamping force (max): 1,200 N Holding force (max): 1,400 N Weight: 0.23 kg Spindle thread: M6 x 40 eClass: 21041717 ETIM: EC011973 Special features Vertical-foot mounting Integrated safety lock Lever-style clamp suitable for jigs and fixtures Corrosion-resistant stainless-steel design Compact design for tight assemblies FAQ What clamping and holding forces does the clamp provide? The Kukamet vertical toggle clamp 212 provides a clamping force of 1,200 N and a holding force of 1,400 N, figures that support reliable workholding in many assembly and machining tasks. Is the clamp suitable for use in humid or mildly corrosive workshop environments? Yes, the clamp’s stainless-steel construction improves corrosion resistance and is appropriate for workshops where moisture or light contaminants are present. How is the clamp mounted to a fixture plate? The device is designed for vertical-foot mounting and uses an M6 x 40 spindle thread for secure attachment to tooling plates or jig bases. Does the clamp include a safety mechanism to prevent accidental opening? An integrated safety lock is part of the clamp’s design, preventing unintended release during vibration or handling and supporting safer operation in production settings. Can the clamp be used in portable or lightweight fixtures? Yes, with a unit weight of 0.23 kg and a compact footprint, the clamp is suitable for portable fixtures and multi-station assemblies where low mass is beneficial. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamping Vice With 62mm Arm, Heavy Duty Hold Arm And Safety Lock - Kukamet
Benefit from dependable vertical clamping where compact dimensions, a 62 mm arm and a safety lock combine to secure workpieces reliably under production conditions; order through Metav Werkzeuge or consult our specialists for integration advice. 212 Vertical clamp by Kukamet — 62 mm arm, safety lock The 212 vertical clamp is a compact, vertically mounted clamping device designed to deliver secure holding in fixtures, jigs and small machines across workshop and light industrial environments. Massive holding arm with safety lock 62 mm arm for compact installation Up to 1,200 N clamping force Vertical-foot mounting for rigid fixing Secure clamping that keeps production running With a maximum clamping force of 1,200 N and a holding force of 1,400 N, this vertical clamping unit is engineered for repeatable restraint of components during machining and assembly. The robust clamping action reduces part movement and rework, supporting consistent cycle times and reliable quality control. The combination of measurable clamping values and a massive holding arm provides a tangible performance advantage when stability is critical in production sequences. Compact footprint for efficient fixture layouts A short 62 mm arm and a light overall mass (0.21 kg) allow integration into dense fixture arrangements without compromising rigidity. The vertical-foot mounting makes the clamp suitable for straightforward attachment to plates or bases where space is constrained, enabling more efficient use of fixture area and simpler toolpath planning. This compact design helps to reduce setup time and supports quicker changeovers between jobs. Built-in safety and durable finish for everyday use The integrated safety lock prevents unintended release under vibration or during handling, increasing operator safety and process reliability. The component’s black-oxide finish offers corrosion resistance and a professional appearance while standing up to workshop conditions. These design choices extend service life and reduce maintenance intervals, which in turn lowers total cost of ownership for routine production tooling. Practical compatibility and straightforward handling Designed as a lever-operated vertical clamp, the unit suits a wide range of workshop tasks where fast, repeatable clamping is required. The massive holding arm and safety locking mechanism facilitate secure operation during manual or semi-automated processes. Its modest mass and compact form factor simplify storage and handling, while the clear, quantified performance figures support straightforward specification in fixture design documents. For a robust vertical clamping solution from Kukamet, contact Metav Werkzeuge for availability and technical consultation — our team will advise on fitment and delivery from Emmerich. Technical Data SKU: B212-2-D-L-C1 Product: Vertical clamp 212 Brand: Kukamet ECLASS: 21041717 ETIM: EC011973 Core data Arm length: 62 mm Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.21 kg Special features Material finish: black-oxide Mounting: vertical foot Massive holding arm Safety locking mechanism Application: lever clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet 212 vertical clamp delivers a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for steady restraint of small to medium workpieces. Can the clamp be mounted on a fixture plate with limited space? Yes, the compact 62 mm arm and vertical-foot mounting make the clamp well suited to dense fixture layouts where space optimisation is required. Does the clamp include a mechanism to prevent accidental release? The unit features an integrated safety lock and a massive holding arm to reduce the risk of unintended opening under vibration. Is the finish suitable for workshop environments? The clamp is supplied with a black-oxide finish, providing basic corrosion resistance and a durable surface for regular workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200x1200mm Precision Indexing Table 1°/5° Readout, 22mm T-Slot, 8,100 kg Clamping Force, 340mm Height - Vertex
Take advantage of the combination of robust clamping force, large working surface and selectable indexing for reliable, repeatable positioning in heavy-duty production. Order the unit directly via Metav Werkzeuge or contact our consultants for application-specific advice. VIT-1200-5 Precision indexing table by Vertex — 1200×1200 mm, selectable 1°/5° indexing The VIT-1200-5 is a precision indexing table designed for heavy-duty positioning and fixture work in machining and production environments; the unit combines a large top plate with high clamping force for stable, repeatable operations Large 1200×1200 mm top plate High clamping force: 8100 Kgs 22 mm T-slots for secure fixturing Indexing selectable: 1° or 5° Rotates clockwise and anticlockwise Stable, heavy-duty support for demanding setups The indexing table delivers a 1200×1200 mm working surface that accommodates substantial jigs and multiple fixtures while its considerable mass of 2000 kg provides inherent stability against cutting forces. With a clamping force of 8100 Kgs and 22 mm T-slots, the unit ensures secure workholding for a wide range of setups. These characteristics reduce vibration and positional drift, which in turn preserves tool life and improves final part quality. The 340 mm mounting height integrates with standard machine beds and workstations without exotic adapters. Precise, selectable indexing for repeatable cycles Designed for controlled rotary positioning, the table offers selectable indexing at 1° or 5°, enabling coarse or fine step positioning depending on the application. The mechanism supports rotation both clockwise and anticlockwise, which simplifies programme logic and fixturing strategies on multi-axis cells. With an accuracy class 3, the device provides a reliable baseline for repeated operations where angular precision and repeatability are required, shortening setup times and improving throughput in batch manufacturing. Practical integration and long-term reliability The rotary top is engineered for continuous use in production environments and is compatible with common fixturing systems via the 22 mm T-slots. The ability to index in both directions and the robust clamping capability make the table suitable for sequential machining, inspection and assembly stages where positional security matters. The construction and specification focus on operational uptime and consistent performance; supplied through Metav’s European quality filter, the unit benefits from a dependable logistics and spare-parts approach that supports sustained production life. Contact Metav Werkzeuge to discuss how the Vertex VIT-1200-5’s large top plate and 8100 Kgs clamping force can be configured for specific machining or inspection processes and to arrange technical consultation Technical data SKU: VIT-1200-5 GTIN: 4061905092893 Model designation: Precision indexing table eClass: 36600310 Dimensions & measured values Top plate dimensions: 1200×1200 mm Height: 340 mm Mass: 2000 kg T-slot width: 22 mm Clamping force: 8100 Kgs Indexing resolution: 1° or 5° Accuracy: class 3 Special features & functions Table rotates clockwise and anticlockwise Indexing selectable between 1° and 5° Heavy-duty design for stable workholding Suitable for integration with standard fixturing systems FAQ How precise is the indexing of the VIT-1200-5? The indexing provides selectable steps of 1° or 5°; the unit is built to accuracy class 3, offering dependable repeatability for positioning tasks. Can the table rotate in both directions during a machining cycle? Yes, the worktable rotates both clockwise and anticlockwise, allowing flexible programme strategies and simpler toolpath planning for the Vertex VIT-1200-5. What holding options are available for securing workpieces? The top plate features 22 mm T-slots and a clamping capability listed as 8100 Kgs, enabling robust fixturing with standard clamps and modular fixtures on the VIT-1200-5. Is the VIT-1200-5 suitable for heavy fixtures and large components? With a 1200×1200 mm plate and a mass of 2000 kg, the table supports substantial fixtures and large components while maintaining stability during operation. Who supplies and supports the VIT-1200-5 in Europe? The VIT-1200-5 is supplied via Metav Werkzeuge, which provides European logistics, consultancy and parts support for Vertex rotary equipment Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
120mm Horizontal Clamp With Angle Foot M5 x 30 Pressure 800N Holding 1100N - AMF
Achieve secure fixturing with the AMF Horizontal clamp No. 6833, Size 1 with angular foot: the combination of a 1,100 N holding force, 800 N clamping force and compact construction supports reliable, repeatable setups. Order the clamp directly via Metav Werkzeuge or consult the Metav specialists for tailored fixture advice. AMF Horizontal clamp No. 6833, Size 1 with angular foot — compact fixturing with high holding power The AMF Horizontal clamp No. 6833, Size 1 with angular foot is a compact clamping unit designed for jigs and fixtures where space is limited and dependable workpiece retention is required. Compact size 1 for tight fixtures Holding force 1,100 N for secure clamping Clamping force 800 N for stable operations Pressure screw M5 x 30 for fine adjustment Reliable clamping performance for repeatable setups The horizontal clamping unit delivers a measurable holding force of 1,100 N and a clamping force of 800 N, ensuring that workpieces remain immobile under machining or assembly loads. These figures translate into fewer rejects and less rework, as the fixture holds parts consistently during cycles. The compact Size 1 format minimises interference with tooling paths while maintaining the necessary retention force for small to medium components, which helps to reduce set-up time and increase throughput on production lines. Flexible mounting thanks to the angular foot An integrated angular foot provides versatile mounting options for the clamp, enabling attachment on vertical or horizontal surfaces without additional adapters. The long base dimension L1 120 mm and the clearances indicated by H, H1, H2 allow predictable positioning in complex jig constructions. This adaptability supports efficient machine bed use and allows fixtures to be designed with shorter tooling envelopes, improving accessibility and reducing collision risks during operation. Precise pressure control for delicate adjustments Fine-tuning of clamping pressure is achieved via the M5 x 30 pressure screw, which permits gradual increase of contact force without abrupt shocks to the workpiece. This adjustability is particularly beneficial for fixtures handling delicate or thin-walled components where excessive force would cause deformation. The screw-based adjustment simplifies repeatable setups and allows maintenance of consistent clamping conditions across production batches. Built for workshop and industrial fixturing needs The clamp suits a wide range of shop-floor applications, from small-batch jigs to serial production fixtures. Its combination of compact form and robust retention supports reliable process control and reduces operator intervention. The measured parameters and standardised attachment points make integration into existing fixtures straightforward, accelerating project deployment and contributing to predictable cycle times and improved overall equipment effectiveness. Secure machining setups with AMF's compact horizontal clamp are available through Metav Werkzeuge — contact Metav Werkzeuge for availability and personalised fixture guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000604353NW Type: 6833 Product: Horizontal clamp Label: Waagrechtspanner Nr.6833 Gr.1 Winkelfuß AMF Brand: AMF Core figures Holding force max: 1,100 N Clamping force max: 800 N Pressure screw: M5 x 30 L1: 120 mm H: 57 mm H1: 68 mm H2: 49 mm A: 5 mm B: 32 mm C: 13.5 mm D: 5.2 mm E: 18.5 mm F: 4 mm I: 10 mm K: 8 mm M: 19 mm N: 31 mm P: 28 mm Angle a: 90° Special features With angular foot Size: 1 Pressure screw M5 x 30 Packaging unit: 1 FAQ What are the holding and clamping forces of this clamp? The AMF Horizontal clamp No. 6833 (SKU 4000604353NW) provides a holding force of 1,100 N and a clamping force of 800 N. How is the clamp mounted in a fixture? Mounting is via the angular foot, allowing attachment to vertical or horizontal surfaces; the base length L1 120 mm and standardised dimensions simplify positioning. Is the clamping pressure adjustable? Yes, clamping pressure is adjusted using the M5 x 30 pressure screw for fine, controlled changes in contact force. For which applications is this clamp best suited? The clamp is suitable for jigs and fixtures in workshop and industrial settings, especially where compact retention with reliable holding is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Horizontal Clamp With Horizontal Base, 800 N Clamping Force, 1 Pc - AMF
Take advantage of a compact, robust clamping solution that combines a Size 1 footprint with a low-profile horizontal foot and a reliable clamping force of 800 N, delivering secure holding of up to 1,100 N for fixture and jig applications. Order the AMF horizontal clamp directly via Metav Werkzeuge or consult our specialists for application guidance. AMF Horizontal Clamp No. 6830 (Size 1) with Horizontal Foot — 800 N clamping force The AMF Horizontal Clamp No. 6830 (Size 1) is a compact horizontal clamping device designed for fixture and jig work where a low-profile horizontal foot is required, providing dependable clamping and repeatable positioning in constrained spaces Compact size 1 for space-saving fixtures Horizontal foot for low-profile mounting Max clamping force 800 N, holding 1,100 N Includes M5 x 30 pressure screw Precise, space-saving clamping for jigs and fixtures The horizontal clamp offers a compact Size 1 construction that suits tight fixture configurations while keeping machining envelopes clear. Its low-profile horizontal foot reduces interference with adjacent components and allows mounting where vertical clearance is limited. The combination of compact dimensions and lateral mounting makes the unit ideal for repetitive production setups, assembly jigs and manual fixture stations where consistent lateral clamping is required. The incorporated M5 x 30 pressure screw permits secure adjustment and fine setting of the contact point, supporting reliable part location without additional adapter elements. Reliable holding and repeatable forces for process security Engineered for industrial use, the clamp provides a clamping force of up to 800 N and a holding force of 1,100 N, ensuring firm part retention during machining or assembly steps. The device’s adjustable elements — shown in the dimensional data — allow an adaptable clamping range for varying stock thicknesses, delivering reproducible pressure across cycles. For production planners and quality engineers, this means fewer rejects from part movement and more predictable process capability. The mechanism is straightforward to integrate into existing fixtures, translating force specifications into verifiable holding behaviour on the shop floor. Practical dimensions and adjustable range for flexible use Key dimensions and adjustment windows are provided to aid fixture design and NC programming. The item includes an adjustable clamping range (C: 13–14.5 mm) and stroke/height parameters that facilitate quick integration into bespoke workholding. These measurable values support precise CAD layout and help determine clearance envelopes. Where system robustness and repeatability are priorities, the unit’s physical parameters allow engineers to calculate leverage, contact pressure and potential interference, reducing trial-and-error during fixture assembly. For assured fixture performance and integration support, order the AMF Horizontal Clamp No. 6830 via Metav Werkzeuge — for technical advice and availability contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000833507NW Manufacturer: AMF Type: 6830 Product type: Horizontal clamp with horizontal foot Packaging unit: 1 Facts Max clamping force: 800 N Max holding force: 1,100 N A: 5 mm B: 42 mm C: 13–14.5 mm D: 5.2 mm E: 18.7 mm F: 8 mm H: 19 mm H1: 30 mm H2: 49 mm HW min.: −3 mm HW max.: 2.5 mm I: 10 mm K: 5.5 mm L1: 120 mm M: 18–21.5 mm N: 34 mm P: 34 mm Special features With horizontal foot Pressure screw M5 x 30 Size 1 Adjustable clamping range (C) Low-profile mounting for constrained spaces FAQ What clamping and holding forces does the clamp provide? The AMF Horizontal Clamp No. 6830 delivers a clamping force up to 800 N and a holding force up to 1,100 N, suitable for many light- to medium-duty fixture applications. Is the clamping range adjustable to accommodate different workpiece thicknesses? Yes, the clamp features an adjustable clamping range (C: 13–14.5 mm) and other dimensional allowances that enable adaptation to varying material thicknesses. Can the unit be mounted on horizontal surfaces with limited vertical clearance? The low-profile horizontal foot and compact Size 1 design permit mounting where vertical clearance is restricted, making the device suitable for confined fixture arrangements. Does the clamp include an adjustment screw and what is its specification? The assembly includes a pressure screw specified as M5 x 30 for contact-point adjustment and secure part seating within the fixture. Is the product identified by a specific SKU for ordering and traceability? Yes, the clamp is listed under SKU 4000833507NW for ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Machine Foot Size 2 Zinc-Plated, M16 x 1.5 x 120 Thread - TECWERK
Take advantage of a zinc-plated levelling mount with a M16 x 1.5 x 120 mm threaded stud and a Ø 120 mm support plate for secure, vibration-isolating support; suitable for lathes, milling machines and saws. Order the part directly via Metav Werkzeuge or consult the advisors for sizing and supply. ALBRECHT machine foot Size 2 – zinc-plated levelling mount, M16 thread (TECWERK) The ALBRECHT machine foot Size 2 is a zinc-plated levelling mount designed to provide stable support and vibration isolation for heavy workshop machinery such as lathes and milling equipment Zinc-plated for corrosion protection Threaded stud M16 x 1.5 x 120 mm Ø 120 mm base with 18 mm levelling travel Max static load 400–1000 kg per foot Secure levelling and dual vibration isolation The zinc-plated mount provides a dependable support platform, combining a M16 x 1.5 x 120 mm threaded stud with a Ø 120 mm base to distribute loads evenly across the shop floor. The specification lists a max static load of 400–1000 kg per foot and an overall installed height of 49 mm, delivering the mechanical stability required for precision operations. By isolating vibrations from the machine to the environment and shielding precision machines from external disturbances, this levelling mount helps preserve component tolerances and maintain consistent machining results. Correct sizing and straightforward installation for reliable operation Determining the right mount is a simple, rational process: establish the total machine mass, divide by the number of fixing points and compare the result with the foot’s rated load. The unit’s 18 mm levelling travel allows for fine adjustment on uneven floors, while the threaded stud simplifies secure attachment to machine bases. Proper selection and installation reduce wear on bearings and guides, lower the risk of misalignment and support uninterrupted production by preventing micro-movements and tilt during machining cycles. Durable finish and workshop-ready versatility A corrosion-resistant finish and a broad bearing surface make this levelling mount suitable for heavy-duty workshop environments where coolant, dust and humidity are present. The Ø 120 mm support plate resists indentation and spreads load over a larger area, reducing point loading on shop floors. Maintenance is minimal: scheduled inspections of the levelling plate and thread ensure ongoing performance, while the robust design contributes to long service life and dependable machine placement in both general engineering and precision workshops. For reliable levelling and effective vibration control, choose the TECWERK ALBRECHT machine foot Size 2 and contact Metav Werkzeuge for expert advice and dependable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832073NW Label: Maschinenschuh Gr. 2 ALBRECHT Product type: Maschinenschuh Manufacturer: TECWERK Packaging unit: 1 Facts Ø D: 120 mm Height incl. levelling plate H: 49 mm Levelling travel N: 18 mm Threaded stud G: M16 x 1.5 x 120 mm Max static load per foot: 400–1000 kg Special features Zinc-plated finish Suitable for lathes, milling machines, saws and other machines Dual vibration isolation (machine-to-environment and external-to-machine) Simple sizing via weight divided by number of fixing points FAQ What static load can each mount support? The ALBRECHT machine foot Size 2 is rated for a max static load of 400–1000 kg per foot; the allowable load per mounting depends on the machine’s total weight and the number of fixing points. How much levelling adjustment is available? This levelling mount offers 18 mm of levelling travel and an installed height of 49 mm, allowing for fine height correction on uneven floors. Is the finish suitable for humid or coolant-prone environments? The zinc-plated finish on the ALBRECHT mount provides increased resistance to corrosion, making it appropriate for workshop conditions with occasional coolant exposure or higher humidity. Which machine types are appropriate for this levelling mount? The levelling mount is suitable for heavy workshop equipment such as lathes, milling machines and saws, where stable positioning and vibration isolation improve process stability. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
120mm Machine Table Clamp 200mm Clamping Height, 22x10.5mm Rail Section - BESSEY
Take advantage of secure, high clamping height together with a compact rail profile for reliable machine-table operations; benefit from robust design and straightforward installation — order directly via Metav Werkzeuge or consult our specialists for specification matching. BESSEY machine table clamp – 200 mm clamping height, 120 mm reach A BESSEY machine table clamp engineered for firm, repeatable workpiece clamping on machine tables, offering a 200 mm clamping height and a 120 mm projection for flexible setup. 200 mm clamping height for large setups 120 mm reach for versatile positioning 22 x 10.5 mm rail cross-section for compact fit Designed for machine-table clamping applications Firm, repeatable clamping that speeds production The clamping solution provides a consistent clamping height of 200 mm, ensuring repeatable setups that reduce adjustment time between operations. The elevated jaw position simplifies handling of taller workpieces and minimises rework caused by inaccurate fixture heights. Built as a precision machine table clamp, the device translates setup consistency into measurable time savings on the production floor while supporting process stability. Flexible positioning with compact rail integration With a 120 mm reach, the clamping arm delivers the projection needed for off-centre fixtures without imposing excessive space requirements. The 22 x 10.5 mm rail cross-section allows integration into narrow machine table slots and keeps the clamping footprint compact. This combination supports versatile fixturing strategies, enabling quick repositioning on the table and easier adaptation to diverse component geometries. Practical design for industrial workshop use The unit is conceived for straightforward installation and reliable everyday use in industrial contexts. The construction emphasises durability and repeatability, making it suitable for serial production and maintenance tasks alike. As a reputable brand component, the clamp contributes to a dependable fixturing setup that reduces process variability and supports a safer, more efficient workshop environment. Speak to Metav Werkzeuge for tailored advice on integrating the BESSEY clamping range into existing setups and request specific delivery options from Emmerich via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Item number: 4123740030NW Product type: Machine table clamp Brand: BESSEY Clamping height: 200 mm Reach/projection: 120 mm Rail cross-section: 22 x 10.5 mm Packaging unit: 1 Facts Clamping height: 200 mm Reach: 120 mm Rail cross-section: 22 x 10.5 mm Packaging unit: 1 Special features Suitable for machine-table clamping Compact rail profile 22 x 10.5 mm Proven brand component for industrial use FAQ What is the maximum clamping height of this device? The clamp offers a maximum clamping height of 200 mm as specified for the BESSEY machine table clamp (SKU 4123740030NW). Can the clamp be used on narrow machine table slots? Yes, the 22 x 10.5 mm rail cross-section is designed for compact mounting and suits narrower table profiles. What does the 120 mm reach mean in practice? A 120 mm reach refers to the projection of the clamping arm, allowing positioning over off-centre or taller fixtures while keeping the clamp footprint small. Is this clamping solution suitable for serial production? The device is designed for repeatable setups and robust daily use, making it appropriate for serial operations where consistent clamping height and positioning are required. Which product type and brand is this item from? This is a machine table clamp from BESSEY, identified by SKU 4123740030NW, intended for secure table-mounted fixturing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Tapered Arbor MK2 to B18 Hardened And Ground With Drill Chuck Taper DIN 238 - TECWERK
Take advantage of the DIN 238 drill-chuck taper and the fully hardened and ground construction for consistent concentricity; the compact 120 mm length keeps the toolstack tidy and reduces overhang. Order the taper arbor directly via Metav Werkzeuge or consult the team for application advice. Taper arbor MT2 to B18 (TECWERK) — Morse taper to B18 drill-chuck adaptor, hardened and ground A taper arbor MT2 to B18 designed to accept drill chucks on drilling and turning machines and to ensure repeatable, standardised mounting. DIN 238 drill chuck taper Morse taper MT2 external taper Fully hardened and ground Total length 120 mm Accurate chuck mounting for repeatable machining The arbor is manufactured to the DIN 238 taper specification, providing a standardised interface between machine spindle or tailstock and the drill chuck. With an external Morse taper (MT2) on the shaft and a B18 receptacle for drill chucks, the component offers precise axial and radial location that reduces run-out. This reliable seating translates into improved hole quality and less time spent on rework, making the arbor a practical choice for tasks where concentricity matters. Robust construction that extends service life Constructed fully hardened and ground, the shaft resists wear from repeated insertions and removals, which preserves the fit and accuracy over prolonged use. The heat-treated surface hardness and the ground finish improve contact behaviour and reduce fretting, so maintenance intervals are extended and downtime is minimised. The 120 mm total length provides a compact profile that limits overhang while maintaining sufficient reach for common drilling operations. Straightforward integration into workshop workflows The taper adapter accepts chucks with a B18 shank and seats into any compatible MT2 receptacle, enabling fast retrofits and interchange between drilling and turning machines. Conformity with DIN standards simplifies spare-part planning and ensures compatibility across suppliers. The design is suitable for routine workshop use where secure chuck mounting and quick tool changes support efficient production and flexible tooling setups. For TECWERK quality and dependable chuck mounting solutions, contact Metav Werkzeuge in Emmerich for order placement and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832328NW Norm: DIN 238 Manufacturer: TECWERK Product type: taper arbor Data Total length: 120 mm Packaging unit: 1 External taper: MT2 Special features DIN 238 drill chuck taper (B18) Fully hardened and ground throughout For acceptance of drill chucks on drilling and turning machines External Morse taper MK2 (MT2) Shank / reception: B18 FAQ What machines is this taper arbor compatible with? The arbor fits into spindles or tailstocks with an MT2 receptacle and accepts drill chucks with a B18 shank, making it suitable for many drilling and turning machines that use these standard tapers. What does conformity to DIN 238 mean for everyday use? Conformity to DIN 238 indicates a standardised drill-chuck taper interface, so the arbor ensures interchangeability and predictable seating when mounting drill chucks designed to the same norm. How does the hardened and ground finish benefit workshop operations? The fully hardened and ground surface improves wear resistance and maintains accurate seating over many cycles, which reduces maintenance and helps sustain drilling precision in daily production. Is the arbor suitable for precision assembly and small-series production? Yes — the arbor’s standardised tapers and controlled finish provide repeatable concentricity, making it appropriate for precision assembly tasks and small-series manufacturing where consistent chuck alignment is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
120mm Toolholder For Steel Holder Head B With 40mm Cylindrical Bore, Quick-Change Compatible - TECWERK
Benefit from the robust quick-change design with a 40 mm cylindrical bore and a 120 mm overall length for reliable clamping and faster setup cycles; order the holder directly via Metav Werkzeuge or consult the team for application-specific advice. TECWERK Quick-change holder (for Steel Holder Head B) — 40 mm cylindrical bore, 120 mm length The TECWERK Quick-change holder (for Steel Holder Head B) is a precision clamping component designed to receive large boring bars and Morse taper sleeves directly for turning and boring operations 40 mm cylindrical bore for large shanks Direct mounting for big boring bars and MT sleeves 120 mm overall length for stable engagement Faster changeovers with proven repeatability The quick-change concept reduces machine downtime by enabling fast, repeatable swaps between tools. With a 40 mm cylindrical bore and an overall 120 mm length, the unit provides a consistent seating surface that maintains concentricity and minimises run-out during operations. In practice, this translates into shorter setup times and fewer re-measurements after tool changes, supporting lean production goals and higher machine utilisation. Designed for heavy boring bars and Morse taper sleeves Engineered for the direct acceptance of large boring bars and Morse taper sleeves, the holder offers the rigidity required for medium- to heavy-duty turning tasks. The cylindrical reception ensures an even load distribution along the shank, which improves cutting stability and surface finish. For users with mixed tooling—solid bars and MT-mounted tools—this reduces the need for additional adapters and simplifies tooling logistics. Built compatibility with Steel Holder Head B for straightforward integration The interchangeable unit is specifically suitable for Steel holder head B, allowing seamless integration into existing quick-change systems that employ this head type. The design eliminates intermediate clamping elements where possible, promoting a compact tool stack and reliable axial positioning. Clear dimensional data—40 mm bore and 120 mm length—supports accurate planning when laying out tool assemblies or verifying spindle clearance. Supply assurance and quality filter from a trusted partner Availability is backed by a structured supply chain and a dedicated distribution partner that acts as a European quality filter. Sourcing through this channel provides access to a broad portfolio of precision components and the assurance of consistent product verification. Traceability of the unit and concise technical data help procurement and production planners to align requirements without compromising on operational reliability. Contact Metav Werkzeuge for a compatibility check or to arrange immediate supply from Emmerich: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 2000832172NW Label: Wechselhalter f.Stahlhalterkopf B f.gr.Zylinderschäfte Spann-D.40mm TECWERK Product type: Quick-change holder Manufacturer: TECWERK UID: 2000832172NW Facts Bore diameter: 40 mm Overall length: 120 mm Packaging unit: 1 Special features with cylindrical bore for direct reception of large boring bars and Morse taper sleeves for quick-change steel holder head B suitable for large cylindrical shanks FAQ What is the clamping or bore diameter of the holder? The holder provides a 40 mm cylindrical bore as the clamping interface for large shanks. Is the unit compatible with Morse taper sleeves? Yes, the design allows direct mounting of Morse taper sleeves for quick tool swaps. Which holder head does this unit fit? This quick-change component is intended for use with Steel holder head B and integrates into compatible quick-change systems. What is the overall length of the holder? The total length is 120 mm, providing stable engagement and axial support. Can large boring bars be mounted directly? Yes, the holder is specified for direct acceptance of large boring bars, reducing the need for additional adapters. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com