Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
12mm Push Rod Clamp Horizontal Base 1,500N Thrust, Zinc-Plated Cast Body 0.63kg - Kukamet
Dependable holding force of 1,700 N combined with a compact 0.63 kg body ensures fast fixture changes and stable clamping in workshop environments; the galvanised cast construction increases corrosion resistance and service life. Order the push-rod clamp 535 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 535 – Horizontal-foot clamp with 1,500 N pressing force (Kukamet) Push-rod clamp 535 is a compact mechanical clamp for horizontal mounting, designed for repetitive fixture and workholding operations in workshops and light industry. Horizontal-foot mounting for stable installation Galvanised cast body for corrosion resistance Maximum pressing force 1,500 N Compact weight 0.63 kg for easy handling Consistent clamping performance for repeatable workflows The clamp delivers a maximum pressing force of 1,500 N and a holding force of 1,700 N, providing a clear performance margin for many assembly and machining tasks. These figures translate into reliable part retention during short-cycle operations and manual machining, reducing rework and misalignment. The mechanism converts operator action into a reproducible axial push, which is preferable where consistent clamping pressure is required. Such predictable behaviour supports planning of cycle times and tool paths in production processes. Durable construction that keeps the workshop running Built with a galvanised exterior and a cast body, the device resists routine wear and corrosive workshop atmospheres better than uncoated components. Galvanising protects exposed surfaces from oxidisation, while the cast main body provides the rigidity necessary to maintain alignment under load. Together these features help to extend mean time between replacements and limit unscheduled maintenance, supporting a steady production flow and lower lifetime operating costs. Fast mounting and compact handling for flexible setups The horizontal-foot design enables secure attachment to machine tables or fixture plates and supports a low-profile installation where space is restricted. The integrated pressure spindle (M8 x 50) allows fine adjustment of contact point and stroke, while the 12 mm piston diameter ensures an efficient transfer of force. At 0.63 kg, the unit is small enough to be repositioned quickly during fixture changes, which speeds set-up times and reduces downtime between jobs. Clear specifications to aid procurement and integration Technical clarity simplifies stocking and replacement planning: the clamp is supplied in a compact, ready-to-install format with standardised connection dimensions and a familiar mounting footprint. The combination of measured performance data—pressing force, holding force, piston diameter—and the robust build makes specification for jigs and fixtures straightforward. For purchasing and inventory control the product is listed under SKU 535-3-Q12-R with GTIN 8682843521236, facilitating traceability and reorder processes. For reliable workshop clamping choose the Kukamet push-rod clamp 535—contact Metav Werkzeuge for procurement advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 535-3-Q12-R GTIN: 8682843521236 SKU: 535-3-Q12-R EClass: 21041716 ETIM: EC011973 Facts Maximum pressing force: 1,500 N Holding force: 1,700 N Piston diameter: 12 mm Weight: 0.63 kg Special features Material: galvanised with cast body Mounting: horizontal foot Pressure spindle: M8 x 50 Category: Clamping FAQ What is the maximum pressing force of this clamp? The clamp provides a maximum pressing force of 1,500 N, enabling secure retention for many manual and light machining operations. Which mounting option does the clamp use? The unit is supplied with a horizontal foot for stable attachment to worktops and fixture plates. Is the clamp suitable for use in corrosive workshop atmospheres? With a galvanised cast body, the clamp offers improved resistance to oxidisation and general workshop humidity compared with uncoated components. What are the connection and adjustment specifications? Adjustment is via a M8 x 50 pressure spindle and the actuator uses a 12 mm piston diameter to deliver the specified force. How is the product identified for ordering and inventory? The product is listed under SKU 535-3-Q12-R and GTIN 8682843521236 for procurement and stock management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Base 2,500N Thrust, Zinc Plated 2960N Hold Force - Kukamet
Take advantage of a compact, zinc‑plated clamp that combines robust holding power and space‑saving installation for reliable fixture work; its 2,500 N clamping capacity and horizontal mounting foot make it suitable for repetitive operations in jigs and fixtures. Order directly via Metav Werkzeuge or contact the consultants for tailored specification advice. 521 Push‑rod Clamp (Horizontal foot, 2.5 kN) – Kukamet The 521 is a compact push‑rod clamp designed for horizontal mounting in fixtures and assembly jigs, delivering consistent clamping up to 2,500 N with a corrosion‑resistant zinc finish. Quick‑action clamping mechanism Horizontal mounting foot for fixture use Zinc‑plated for corrosion resistance 12 mm piston diameter for compact force transfer Robust holding where space is tight The compact design of this push‑rod clamp supports reliable fixture layouts where flange or rail space is limited. The horizontal mounting foot allows the unit to be secured close to the workpiece, reducing leverage and improving stability during repetitive cycles. With a zinc‑plated finish, the unit withstands humid workshop conditions while remaining easy to integrate into existing tooling. The small footprint and light weight lend themselves to both fixed production jigs and portable assembly rigs, enabling precise positioning without bulky attachments. Consistent clamping force for repetitive tasks Engineered for predictable performance, the device delivers a maximum clamping force of 2,500 N and a maximum holding capacity of 2,960 N, giving a clear safety margin between applied and retained forces. The 12 mm piston transfers clamping energy efficiently, which shortens cycle times and reduces the need for readjustment. For process planners this means fewer stoppages for re‑clamping and a measurable improvement in throughput when the clamp is used in repetitive assembly or inspection stations. Durable materials and practical mounting options Constructed with a zinc‑plated body, the clamp resists corrosion without requiring specialised maintenance. The horizontal foot fixing simplifies alignment and allows the use of common fasteners for installation. The robust thread spindle specification (M8x50) provides secure attachment with standard hardware. These features together lower total lifecycle effort and support predictable service intervals in busy workshops and small production lines. Integration, safety and workshop benefits The clamp’s compact actuation and clearly defined force ratings make it suitable for automated or manual applications where controlled clamping is essential. Because the design separates actuation and holding capacities, planners can select appropriate safety margins for different fixture tasks. For buyers seeking straightforward installation and straightforward spare‑part management, the unit’s standardised dimensions and familiar fastening mean shorter downtimes and easier stock management for maintenance teams. For durable, space‑efficient clamping choose Kukamet’s 521 and contact Metav Werkzeuge for specification support and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 521-3-Q12 GTIN: 8680731502756 Brand: Kukamet Weight: 0.39 kg Material: zinc‑plated Facts Maximum clamping force: 2,500 N Maximum holding force: 2,960 N Piston diameter: 12 mm Thread spindle: M8x50 ECLASS: 21041716 ETIM: EC011973 Special features Horizontal foot mounting Compact push‑rod actuation Suitable for fixture and jig work SKU: 521-3-Q12 FAQ What is the maximum clamping force of this clamp? The Kukamet 521 push‑rod clamp provides a maximum clamping force of 2,500 N, with a maximum holding capacity of 2,960 N for secure retention in fixture applications. Which mounting orientation is recommended for installation? The unit is supplied with a horizontal mounting foot designed for installation on flat fixture surfaces; the horizontal foot ensures stable engagement and straightforward alignment in jigs. What is the piston diameter and why does it matter? The piston has a 12 mm diameter, which concentrates force transfer in a small form factor and supports compact fixture designs while maintaining effective clamping power. Is the clamp protected against corrosion in workshop environments? Yes, the body is zinc‑plated, offering basic corrosion resistance suitable for standard workshop and assembly conditions without specialised coatings. Can this clamp be used in automated assembly lines? The clamp’s predictable force characteristics and compact actuation make it suitable for integration into automated or semi‑automated assembly stations where fixed clamping cycles are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Foot 2.5kN Thrust, Zinc Plated Cast Body 0.635kg - Kukamet
Take advantage of the combination of robust holding power, simple mounting and corrosion-resistant construction for reliable clamping in serial production. Order the Kukamet push-rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 531 — Kukamet horizontal-base clamp with 3.7 kN holding force The Push-rod clamp 531 is a horizontal-base push rod clamp designed for secure workholding in workshop and light industrial applications Horizontal base for stable mounting Holding force up to 3,700 N Zinc-plated cast body for long life Pressure spindle M8×50 for adjustable contact Consistent clamping for repeatable production A clamp that delivers measurable results reduces scrap and downtime. With a maximum holding force of 3,700 N and a maximum pressing force of 2,500 N, this device secures components reliably during machining, assembly or testing. The adjustable pressure spindle M8×50 permits fine contact pressure setting, making repeatable setups faster to achieve. Translating specification into benefit: fewer re-clamps and more consistent tolerances across batches. Built to withstand workshop environments Robust construction matters where tools are used daily. The unit features a zinc-plated cast body that combines structural rigidity with corrosion resistance, extending service life even in humid or oily surroundings. At approximately 0.635 kg, the clamp offers a favourable weight-to-stability ratio, simplifying handling during fixture changes while maintaining a solid feel when engaged. The material choice minimises maintenance and supports long-term reliability. Faster set-up and safe operation on the shop floor Fast, repeatable clamping reduces cycle time. The horizontal base allows secure bolting to fixtures or workbenches for immediate use, while the compact actuation mechanism and piston diameter 12 mm ensure a direct transfer of force with limited deflection. The mechanical principle is straightforward, enabling quick operator familiarisation and a lower risk of incorrect use compared with more complex systems. The compact design keeps the clamped area clear and accessible for machining operations. Versatile use across fixtures and applications This clamp is suited to general workshop fixturing, assembly stations and jigs where dependable lateral clamping is required. Its form factor and mounting style make it compatible with existing clamping arrays or bespoke fixtures. Where several identical clamps are required for series production, consistent performance supports process stability and predictable throughput. For procurement channels seeking an assured blend of functionality and stock availability, the supply via Metav Werkzeuge offers the additional reassurance of a European quality filter. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet push-rod clamp 531 into existing fixtures and to request technical compatibility information from Emmerich’s quality specialists Technical Data SKU: 531-3-Q12 GTIN: 8680731502800 Weight: 0.635 kg Material: zinc-plated with cast body Facts Maximum pressing force: 2,500 N Maximum holding force: 3,700 N Piston/rod diameter: 12 mm Pressure spindle: M8×50 Special features Horizontal base mounting Category: clamp / spanner Compact design for fixture integration Suitable for workshop and light industrial use FAQ What is the maximum holding force of this clamp? The Kukamet push-rod clamp 531 provides a maximum holding force of 3,700 N for secure workpiece retention. How is the clamp mounted to a fixture? Mounting is performed via the horizontal base; the design is intended for bolting to jigs, fixtures or workbench plates for stable installation. Is the finish resistant to workshop corrosion? Yes, the zinc-plated cast body offers corrosion resistance suitable for typical workshop environments. What adjustments are available for contact pressure? Contact pressure is adjusted using the M8×50 pressure spindle, allowing fine setting of pressing force for different workpieces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Quick-Change Insert SE 9mm Square Shank for DIN 374/376 M16, L3 5mm L4 35mm - TECWERK
Take advantage of a compact, quick-change solution that combines fast tool swaps with positive torque transmission via a 9 mm square shank for reliable threading to DIN 374/376 M16. The robust Size 2 insert delivers consistent clamping geometry and clear dimensional data for planning tool setups. Order the quick-change insert directly via Metav Werkzeuge or ask our consultants if needed. Quick-change insert SE 12 mm × 9 mm, Size 2 for DIN 374/376 M16 (TECWERK) The Quick-change insert SE 12 mm × 9 mm, Size 2 is a dedicated holder for tapping applications to DIN 374/376 M16, designed for rapid tool exchange in production and workshop environments Rapid tool changes with quick-change design Torque transmission via 9 mm square shank Compatible with DIN 374/376 M16 threading tools Clear dimensional data for process planning Efficient threading operations through fast changeovers The quick-change insert is engineered to reduce non-productive time by enabling fast replacement of threaded tools. With a defined 12 mm diameter interface and a 9 mm square shank, the insert provides stable seating for taps held by the quick-clamping mechanism. This results in shorter set-up times and higher machine utilisation, making it suitable for repetitive threading tasks in small-batch production as well as larger runs. Secure torque transmission for consistent thread quality Because the torque transmission is effected via the shaft square, the load is transferred positively and predictably to the tap. The design operates without a safety coupling, so torque is transmitted directly through the square shank; this ensures repeatable torque behaviour and consistent thread form when used with compatible tapping tools to DIN 374/376 M16. Users benefit from precise power transfer that supports reproducible quality in each cycle. Clear dimensions and measurable specification for process planning Detailed dimensional values support integration into tool lists and CAD fixtures. Key lengths and diameters are provided to facilitate fixture design, collision checks and inventory management. The compact footprint and the standardised interface simplify spare-part planning and make this insert straightforward to specify alongside existing toolholders and machine setups in workshops and production cells. Designed for workshop compatibility and flexible shank options The insert requires matching shank sizes for different toolholder variants, enabling a modular approach to tap holding. The construction allows taps to be retained by the quick-clamping device, while the square shank provides the positive drive. This modularity supports mixed tooling strategies and reduces the number of complete holders required, improving capital efficiency for maintenance and toolroom planning. For precise threading with TECWERK quick-change inserts, contact Metav Werkzeuge for tailored advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing tooling and order fulfilment Technical data Article number: 4000832646NW Type: Size 2 Diameter: 12 mm Square shank: 9 mm Suitable for: DIN 374/376 M16 Packaging unit: 1 Numbers / Core technical data L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm L1: 32 mm D1: 31 mm Special features / Versions without safety coupling inserts held by quick clamping device torque transmission via shaft square different inserts required for different shank sizes FAQ What tap standards is the insert compatible with? The quick-change insert is designed for tapping tools conforming to DIN 374/376 M16 and provides the standard interface for secure clamping and drive. How is torque transmitted to the tap? Torque is transmitted via the 9 mm square shank; the design transfers drive positively without a safety coupling for repeatable torque behaviour. Can the insert be used with different shank sizes? Different inserts are required for different shank sizes; the product supports a modular approach where matched inserts are selected for the corresponding shank. Which dimensions are critical for fixture integration? Key dimensions such as L1, L3, L4, D and D1 are provided to assist with fixture planning and collision checks when integrating the insert into a toolholding system. Is a safety coupling included with this insert? No, this insert is supplied without a safety coupling; torque is delivered directly through the square shank, which should be considered in process risk assessments. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm Quick-Change Insert SES 9mm Square, Adjustable Torque Safety Clutch, L3 30.5mm - TECWERK
Take advantage of a combination of precise torque control and rapid tool changes to reduce tap breakage and downtime; the adjustable safety clutch and 9 mm square torque transfer ensure consistent performance—order via Metav Werkzeuge or consult their specialists for fitment advice. Quick-change insert SES 12mmx9mm Size 2 for DIN 374/376 M16 — TECWERK, adjustable safety clutch The Quick-change insert SES 12mmx9mm Size 2 is a compact tap adaptor designed for tapping operations to DIN 374/376 M16, providing torque limitation and fast interchangeability for production and workshop environments. Adjustable safety clutch for torque limiting Prevents tap breakage under load Torque transfer via 9 mm square shank Compatible with DIN 374/376 M16 taps Consistent torque control reduces breakage and waste The central advantage of the insert is its adjustable safety clutch, which provides reliable torque limitation during tapping operations. By disconnecting or slipping at a preset torque threshold, the mechanism protects cutting tools from sudden overloads and the costly consequences of broken taps. This mechanical safeguard translates directly into fewer interrupted production cycles and lower consumable costs. The clutch design transmits rotation through the 9 mm square shank, ensuring predictable power transfer while the torque cap prevents excessive stresses that typically lead to tool failure. Exact fit and clear dimensions for simple integration Compatibility is assured through adherence to DIN standards: the adaptor is intended for taps to DIN 374/376 M16 and matches shafts via the 9 mm square interface. Key measurements support straightforward integration into existing tool sets: L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm, L1: 32 mm, D1: 31 mm. These dimensions permit planners and technicians to verify clearance and reach without lengthy trials. The quick-change format simplifies swapping between holders and spindles, reducing non-productive time and supporting a faster tool-change rhythm on the shop floor. Practical benefits for workshop efficiency and process reliability Designed for repeatable performance, the insert brings measurable gains in workshop efficiency: faster tool changes, reduced scrap from damaged threads, and lower maintenance frequency. The torque is transmitted over the shaft square for a secure drive link, while the clutch function mitigates the risk of tap fracture when encountering misfeeds or hardened inclusions. For varied shank standards, matching inserts are available to maintain the same safety and interchange benefits across different machines. Metav Werkzeuge supplies technical guidance and reliable delivery from Emmerich, helping to ensure the part fits the intended tapping application and production workflow. For tailored advice on compatibility or to secure supply of this TECWERK quick-change insert from Metav Werkzeuge, contact Metav Werkzeuge directly for product matching and guaranteed availability from their Emmerich quality hub Technical data Article number: 4000832680NW Product: Quick-change insert SES Brand: TECWERK Type: Size 2 Diameter: 12 mm Square shank: 9 mm Suitable for: DIN 374/376 M16 Packaging unit: 1 Measurements L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm L1: 32 mm D1: 31 mm Special features Adjustable safety clutch for torque limitation Torque transmission via shaft square Prevents tap breakage Quick-change format for rapid tool swaps Requires matching inserts for different shaft sizes FAQ What is the main function of this quick‑change insert? The quick‑change insert SES 12mmx9mm Size 2 from TECWERK limits torque via its adjustable safety clutch to protect taps and enable rapid tool changes in tapping applications. Which tap standards does this insert support? The insert is designed for tapping to DIN 374/376 M16 and interfaces via a 9 mm square shank for standard drive connections. How does the safety clutch benefit production? By capping torque, the clutch prevents sudden overloads and tap fracture, reducing downtime and consumable costs associated with broken taps. Are the dimensions sufficient for machine integration? The provided dimensions (L3, L4, L5, D, L1, D1) allow verification of clearance and fit; these values support fast integration into existing tooling setups. Is a different insert required for other shaft sizes? Yes, the torque is transferred via the shaft square and different shaft measurements require the corresponding insert size for correct fit and operation. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm T-Slot Clamping Screw Set M12 38-Piece Heat-Treated, Strength Class 8/10 - AMF
Take advantage of a robust combination of M12 thread compatibility, 12 mm T-slot fit and hardened components to ensure reliable clamping under repeated load; order the set directly via Metav Werkzeuge or consult the sales team for technical matching. AMF clamping screw set Nr. 6520 – 38-piece M12 set for 12 mm T-slots The AMF clamping screw set Nr. 6520 is a machine-table workholding kit designed for secure clamping in 12 mm T-slots on fixtures and milling tables. For 12 mm T-slots M12 threaded components All parts quenched and tempered Supplied in wooden case with hinged lid Secure clamping where it matters The set is engineered for dependable workholding on machine tables and modular fixtures. With M12 threads matched to a 12 mm T-slot, the kit provides consistent preload and repeatable positioning for medium to heavy machining tasks. The combination of standardised thread size and slot compatibility reduces set-up time and minimises the need for bespoke fasteners, supporting faster changeovers and steadier machining cycles. Built for high load and longevity All components are quenched and tempered, offering improved fatigue resistance and dimensional stability during repeated tightening cycles. The inclusion of strength class 8 and 10 parts means the hardware can tolerate higher tensile and shear loads compared with lower-grade fasteners, which supports safer clamping under increased cutting forces. This durability reduces replacement frequency and helps maintain consistent clamping performance over time. Organised kit for efficient workshop use Presented as a 38-piece assortment in a wooden case with hinged lid, the kit keeps components organised and accessible at the bench or in the toolroom. Clear arrangement and sturdy storage accelerate selection of the required part and protect the hardware from surface damage when transported. The compact case supports tidy workshop practices and helps maintain productivity by keeping essential clamping elements to hand. Compatibility, application and selection guidance The clamping kit suits general-purpose fixtures, machine-bed set-ups and modular fixturing systems that accept a 12 mm T-slot and M12 hardware. For specific machine tables or unusual slot profiles, the thread and slot combination should be checked before installation. The set is ideal where robust, standardised clamping is required and where organised storage reduces setup time and operational interruptions. Contact Metav Werkzeuge for tailored advice on the AMF clamping screw set Nr. 6520 and to confirm compatibility with specific machine tables; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 4000833381NW Type: Nr. 6520 Product: clamping screw set Manufacturer: AMF SKU: 4000833381NW Packaging unit: 1 Facts T-slot size: 12 mm Thread: M12 Content: 38 pieces Strength classes: 8 and 10 Special features For T-slots All parts quenched and tempered Supplied complete in wooden case with hinged lid FAQ What does the set contain? The AMF clamping screw set Nr. 6520 is supplied as a 38-piece kit intended to cover common clamping needs for machine tables; the SKU is 4000833381NW. Is this kit suitable for a 12 mm T-slot? Yes, the components are configured for use with a 12 mm T-slot and standard M12 clamping arrangements. Which thread size is included in the set? The kit contains M12 threaded clamping elements suitable for M12 tapped or bolted connections in fixtures. What is meant by strength class 8 and 10? Strength class 8 and 10 denote higher-grade fasteners with increased tensile and shear capability; the AMF set uses these classes to provide improved load capacity and longer service life under machining forces. Are the components hardened? All parts in the set are quenched and tempered, improving durability and resistance to wear during repeated clamping cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm T-Slot Nut DIN 508 10mm M8, Strength Class 10 - AMF
Take advantage of a compact, DIN‑compliant fastening solution that combines a low profile with a robust M8 thread and strength class 10, ensuring consistent clamping performance in standard 10 mm T‑slots — order via Metav Werkzeuge or consult the specialists for application advice. T-Nutenstein DIN 508 T-Nut 10mm M8 AMF — standard T-slot nut with M8 thread and 12 mm height The T-Nutenstein DIN 508 T-Nut 10mm M8 AMF is a DIN‑508 compliant T‑slot nut designed for secure clamping in 10 mm machine table slots and modular fixturing systems. DIN 508 standard fit for T-slot 10 mm M8 internal thread for common fixtures Strength class 10 for high clamping loads Compact 12 mm height for low-profile setups Consistent fit and repeatable clamping in standard T‑slots Compliance with DIN 508 guarantees a precise seating geometry for insertion into T-slot 10 mm profiles, reducing lateral play and enabling repeatable clamping cycles. The machined profile matches common machine table tolerances, so fixture alignment and repositioning run with minimal adjustment. The combination of the standardised form and the integrated M8 thread means compatibility with widely used bolts and clamping elements, simplifying procurement and reducing the variety of fasteners required on the shop floor. High load capacity where strength matters Specified as strength class 10, the component is intended for demanding clamping tasks where increased tensile and yield capacity are required. This elevated class reduces the risk of plastic deformation under higher clamping torques and contributes to longer service intervals in high‑cycle production. For operations that prioritise mechanical reliability, the higher property class delivers a rational performance advantage and supports stable machining conditions with predictable holding force. Rapid integration into existing fixtures and easy machining layout The 12 mm height and compact form factor allow installation into low‑profile setups and tight assemblies without sacrificing thread access. Detailed installation dimensions — A 9.7; E 15; K 6 — provide the necessary reference for CAD modelling and fixture design, enabling seamless integration into existing jigs and clamping systems. The internal M8 thread aligns with standard clamping bolts, which accelerates assembly time and reduces the need for specialised fasteners, delivering a clear efficiency benefit on the production line. Proven reliability and supply continuity for workshops As a standardised T‑slot fastener from AMF, the part supports steady sourcing strategies for production and toolrooms. Availability via Metav Werkzeuge links the component to a stable European supply chain and a broad product range, which helps consolidate procurement and lowers vendor complexity. The presence of a defined standard and clear dimensional data supports quality assurance processes and simplifies documentation for inspection and traceability in workshop environments. For secure, DIN‑compliant clamping select the AMF T‑slot nut and contact Metav Werkzeuge for stock status or technical clarification: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 4000833202NW UID: 4000833202NW Manufacturer: AMF Facts Height: 12 mm T-slot width: 10 mm Thread: M8 Addition: A 9.7; E 15; K 6 Strength class: 10 Packaging unit: 1 Special features Standard: DIN 508 Product type: T-slot nut SKU: 4000833202NW FAQ Which T-slot width does this nut fit? The AMF T‑slot nut is designed for a 10 mm T‑slot in accordance with DIN 508, providing the appropriate seating geometry for standard machine table slots. What thread size is provided in the nut? This T‑slot nut includes an M8 internal thread, matching common clamping bolts and fixture hardware used in workshop assemblies. What does strength class 10 mean for the application? Strength class 10 indicates a higher property class intended for elevated clamping forces; the AMF T‑slot nut rated as strength class 10 offers improved resistance to deformation under load compared with lower classes. Are detailed installation dimensions available for fixture design? Yes; the component data lists the addition values A 9.7; E 15; K 6, which serve as reference dimensions for CAD modelling and fixture layout when integrating the AMF T‑slot nut. Is this product standard compliant and suitable for repetitive clamping cycles? Manufactured to DIN 508, the T‑slot nut from AMF provides a standardised form that supports repeatable seating and reliable clamping performance across multiple cycles. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm T-Slot Nut M8 DIN 508 14mm Height, Strength Class 10 - AMF
Take advantage of a DIN 508-compliant fastening solution that fits 12 mm T-slots and provides an M8 internal thread for standardised fixturing; its strength class 10 rating ensures robust clamping and consistent repeatability in production environments. Order directly via Metav Werkzeuge or consult the team for application guidance. T-slot nut (DIN 508) — 12 mm T-slot, M8 thread — AMF A T-slot nut (DIN 508) engineered for securing fixtures and components in standard 12 mm T-slots, suitable for workshop and industrial clamping applications. DIN 508 compliant T-slot nut Fits 12 mm T-slots M8 internal thread Strength class 10 for high clamping forces Reliable clamping in standard T-slots The DIN 508 conformity guarantees compatibility with industry-standard T-slotted tables and profiles, enabling repeatable fixturing without trial-and-error adaptations. Built to sit precisely in a 12 mm slot and accept an M8 fastener, this component simplifies setup and reduces downtime during tool changes or rework. The standardised interface means fixtures and clamps from different suppliers align predictably, improving throughput and lowering setup variability. Built for strength and consistent repeatability Specified as strength class 10, the design supports elevated clamping forces while maintaining a secure seat in the T-groove. The factory-provided geometry values — A: 11.7; E: 18; K: 7 — define the critical seating and engagement dimensions that influence load distribution and torque transfer. This measured approach to geometry ensures that each unit delivers consistent mechanical behaviour across repeated cycles, which is essential for high-volume or precision assembly processes. Quick integration into assembly and fixturing workflows With a compact profile and standard thread form, the part integrates easily into existing fixturing systems and tooling kits. Supplied in single units, the item is identified by SKU/UID 4000603160NW for straightforward procurement and inventory control. Where fast replacement or exact-match parts are required, the standardised specification streamlines purchasing and reduces the risk of incorrect components entering the production line. The component supports efficient production planning by removing ambiguity about compatibility with common clamps and bolts. For secure, standard-compliant fixturing choose AMF T-slot nuts — contact Metav Werkzeuge for expert advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU / UID: 4000603160NW Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 12mm M8 AMF Manufacturer: AMF Dimensions / Standards Height: 14 mm T-slot width: 12 mm Thread: M8 Standard: DIN 508 Packaging unit: 1 Features / Special values Strength class: 10 Addition: A: 11,7; E: 18; K: 7 Product type: T-slot nut FAQ What slot width does this T-slot nut fit? The T-slot nut is specified for 12 mm T-slots and accepts an M8 fastener, as shown in the product specification for the AMF T-slot nut (SKU 4000603160NW). Is the nut compliant with industry standards? Yes — the component is DIN 508 compliant, ensuring standardised dimensions and interchangeability with compatible fixture systems. What does strength class 10 mean for performance? Strength class 10 indicates the component is designed for higher clamping loads and improved resistance to yielding under torque, supporting more demanding assembly and machining tasks. What are the A, E and K values listed in the data? The values A: 11.7; E: 18; K: 7 are factory-specified geometry figures that define the seating and engagement dimensions of the part; they are used to verify fit and load distribution in fixturing designs. Is the material specified for this T-slot nut? The provided product data for the AMF T-slot nut (SKU 4000603160NW) does not specify the material; consult the manufacturer's technical datasheet for material confirmation and surface treatment details. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12pcs ER-20 Collet Chuck Set SK-40-70L With ER Collets, 0.01mm Runout - Vertex
Combine rigid spindle engagement with precise ER‑20 clamping for reliable machining and reduced tool wear; the complete collet set ensures immediate use on compatible machines. Order the collet chuck set directly via Metav Werkzeuge or ask our consultants if needed. V-752 Vertex collet chuck set — ER‑20, SK‑40-70L The V-752 collet chuck set provides secure toolholding for milling and drilling operations where repeatable concentricity and robust spindle interface are required. ER‑20 compatibility for standard toolholding SK‑40 taper for rigid spindle fit Complete collet set included Consistent clamping for repeatable machining results A high‑precision collet chuck with ER‑20 clamping reduces runout and improves repeatability, which directly benefits surface finish and tool life. The clamping system converts axial and radial loads into a concentric hold, so cutters and drills remain stable under cut. For production shops and maintenance departments, this stability translates into fewer rejects and longer uninterrupted machining runs. Secure spindle interface for heavy and finish machining The SK‑40 taper specified as SK‑40-70L ensures a tight, taperled connection between the spindle and the chuck, delivering enhanced rigidity and torque transmission. This interface is particularly advantageous during heavier milling passes or finish operations where vibration control and concentricity are critical. The taper length supports precise axial positioning and simplifies regripping procedures when tool changes are required. Ready-to-install collet set to reduce downtime Supplied as a ready set, the chuck arrives with the matching collets to allow immediate installation and operation. Quick clamping and release of tools speed up changeovers and help maintain production flow without lengthy setup. Metav’s technical team can advise on collet selection and compatibility to match specific tool shanks and machine spindle requirements, supporting efficient integration into existing tooling systems. Contact Metav Werkzeuge today to discuss the Vertex V-752 collet chuck set, check machine compatibility and secure precise toolholding for improved production reliability Technical data SKU: V-752 GTIN: 4061905085178 Brand: Vertex Product: Collet chuck set Facts Weight: 3 kg Pieces per set: 12 Taper: SK‑40-70L ECLASS: 21020405 Special features Collet type: ER‑20 Set: yes Gallery image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/12/fc/9a/63/639afc12fb5a6051082e33e1/V-751-detail.jpg FAQ What collet type is supplied with the chuck? The V-752 is supplied with ER‑20 collets as part of the set for standard tool shank compatibility. Which spindle taper does this chuck require? The chuck fits an SK‑40-70L taper spindle; the longer taper engagement improves rigidity and axial positioning. Can the chuck be used for both milling and drilling? Yes, the Vertex collet chuck set is suitable for milling and drilling applications where precise toolholding and low runout are required. How does the collet system affect tool life? By improving concentric clamping and reducing vibration, the collet chuck system helps extend cutter and drill service life and maintains consistent part quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12pcs ER-20 Collet Set With MT-3 Collet Chuck, Includes Morse Taper Adapter - Vertex
Take advantage of a balanced combination of ER-20 clamping accuracy, an MT-3 Morse taper interface and a compact 12-piece configuration to secure repeatable toolholding and streamlined setup. Order the set directly via Metav Werkzeuge or consult the technical team for fitment advice. Collet set V-441 — ER-20 collets with MT-3 collet chuck (Vertex) The Collet set V-441 is a precision toolholding solution combining an ER‑20 collet system with an MT‑3 Morse taper shank for dependable machining and general workshop clamping tasks. ER-20 collet system for precision clamping MT-3 Morse taper shank for direct spindle fit 12-piece set for flexible diameter coverage Compact 1.35 kg workshop set for easy handling Consistent clamping for reliable production results The ER‑20 collet system provides a standardised method of clamping that favours repeatability and concentricity in machining operations. By using a uniform collet design, the set reduces runout variability compared with ad‑hoc clamping methods, which supports consistent part quality across batches. The standard format simplifies replacement and extends the usable lifetime of fixtures, while the integrated collet chuck design streamlines insertion and removal within routine tool changes. Direct taper mounting for fast integration Incorporating an MT‑3 Morse taper interface, the set is designed to mount directly to compatible spindles and taper adapters common in workshop environments. The direct taper connection minimises intermediate interfaces and helps maintain axial alignment under load. This configuration supports straightforward integration into existing toolholding stacks and reduces setup time, offering practical benefits for both short runs and longer production cycles. Practical set composition for everyday workshop use Delivered as a 12‑piece configuration, the set supplies a range of collets suitable for many standard diameters encountered in general machining and maintenance tasks. The compact weight of 1.35 kg makes storage and transport within the workshop straightforward, and the organised set format supports quick selection during job changes. Identified by SKU V-441, the package is suitable where a versatile, workshop‑grade clamping solution is required without overcomplicating inventory management. Choose the Vertex V-441 ER‑20 collet set for dependable clamping and contact Metav Werkzeuge in Emmerich for tailored advice and rapid delivery from the European quality hub, reachable via info@metav-werkzeuge.com or by phone for technical clarification Technical data Article number: V-441 GTIN: 4061905096297 Manufacturer: Vertex Data Weight: 1.35 kg Pieces per set: 12 ECLASS: 21022190 Special features ER-20 collet type MT-3 Morse taper shank Delivered as a collet set with collet chuck Brand: Vertex FAQ What taper does the set use and how does it mount? The V-441 collet set uses an MT‑3 Morse taper shank for direct mounting to compatible spindles or taper adapters, providing a straightforward mechanical connection for reliable axial alignment. Which collet standard is included in the set? The package comprises ER‑20 collets; the ER‑20 standard ensures interchangeability with other ER‑20 toolholding accessories and supports consistent clamping behaviour. How many pieces are supplied in the set and what is the SKU? The delivery contains 12 pieces and is sold under SKU V-441, offering a compact assortment suitable for general workshop needs. Is this set suitable for production use in a small workshop? Yes, the Vertex V-441 collet set is designed for workshop and light production environments where ER‑20 clamping and an MT‑3 interface meet common toolholding requirements. What is the weight of the set for handling and storage planning? The complete set weighs 1.35 kg, which facilitates simple handling and compact storage in a tool cabinet or workbench drawer. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12V/50W or 24V/50W Transformer With Bulb For Halogen Lamp VHL - Vertex
Take advantage of a compact replacement that combines reliable voltage options and an included lamp to keep workshop lighting running with minimal downtime. The combination of 12V/50W and 24V/50W compatibility, paired with a genuine Vertex bulb, ensures straightforward replacement for VHL halogen fixtures. Order directly via Metav Werkzeuge or ask the consultants for advice on matching the unit to existing installations. Vertex V-B16 Transformer and Bulb for VHL Halogen Lamp — 12V/50W or 24V/50W The V-B16 Transformer and Bulb is a compact replacement power unit designed for VHL halogen lamps, suitable for workshop and industrial task lighting requiring stable low-voltage operation. Dual voltage compatibility 12V/24V Compact, lightweight design Genuine Vertex replacement part Continuous, dimmable-feeling light where it matters The integrated transformer offers stable low-voltage supply in either 12V/50W or 24V/50W modes, ensuring consistent lamp output and preventing flicker that disrupts precision work. By converting mains voltage to the level required by halogen lamps, the unit supports steady heat and light characteristics that are familiar to metalworking and inspection tasks. Reliable illumination reduces rework and supports accurate visual checks, contributing to efficient production cycles. Small footprint, simple replacement and minimal downtime With a compact, lightweight form, this replacement unit is intended for fast swap-outs without complex rewiring. The included bulb eliminates the need to source a matching lamp separately and shortens maintenance intervals. The low mass of 0.009 kg minimises strain on lamp holders and keeps the fixture balanced. For workshops aiming to reduce equipment downtime, a ready-to-fit transformer and lamp pairing delivers practical time savings and predictable results. Compatibility-focused design for workshop environments Designed as a direct replacement for VHL halogen fixtures, the unit fits common mounting and connection setups used in industrial lighting. As a Vertex-branded component, it aligns with expectations for consistent manufacturing and serviceability. The use of a dedicated transformer is essential for halogen technology: it adapts line voltage safely and preserves the lamp’s luminous properties. For technical queries or assistance selecting the correct voltage option, Metav Werkzeuge offers guidance by email, phone or WhatsApp. Contact Metav Werkzeuge for genuine Vertex replacement units and expert advice on voltage selection or compatibility for VHL halogen installations Technical data Article number: V-B16 GTIN: 4061905092091 eClass: 27039101 Facts Weight: 0.009 kg Voltage / Power: 12 V / 50 W; 24 V / 50 W Special features Compatible with VHL halogen lamps Includes transformer and lamp bulb Brand: Vertex FAQ Is this unit compatible with my VHL halogen lamp? The V-B16 Transformer and Bulb is designed for use with VHL halogen fittings; confirm fixture connections and required voltage before installation. Which voltage should be chosen for a specific installation? Select 12V/50W or 24V/50W according to the lampholder and wiring of the fixture; the V-B16 supports both options for flexibility. Does the delivery include the bulb and transformer together? Yes, the V-B16 package contains both the transformer and the matched halogen bulb for immediate replacement. Can this component be used in industrial workshop lighting? The V-B16 is intended for workshop and industrial task lighting where VHL halogen fixtures are in use and a low-voltage supply is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12V/50W or 24V/50W Transformer With Replacement Bulb For Halogen Lamp VHL - Vertex
Take advantage of the combination of stable dual-voltage operation and compact, lightweight construction to ensure consistent halogen illumination with minimal downtime; order the unit directly via Metav Werkzeuge or consult our team for compatibility and stock confirmation. V-B15 Transformer and Bulb — Dual-voltage 12V/50W or 24V/50W, Vertex The V-B15 Transformer and Bulb is a compact replacement unit for VHL halogen lamps, designed to provide reliable 50 W illumination in inspection and task-lighting applications. Dual voltage: 12V or 24V 50 W halogen output Compact, lightweight design Consistent power delivery for reliable halogen light The combination of a dedicated transformer and matched halogen bulb ensures a steady light output at either 12 V or 24 V, both rated at 50 W, which reduces flicker and maintains luminous consistency during demanding tasks. This technical pairing benefits precision work where stable illumination supports accurate visual inspection and reduces rework. The integrated arrangement also simplifies replacement logistics compared with sourcing separate components, making maintenance cycles more efficient. Small form factor that minimises downtime and fits confined fixtures Weighing only 0.009 kg, the unit’s compact footprint allows quick installation in fixtures designed for VHL lamps. The small mass and compact profile mean less strain on mounting fittings and faster handling during lamp changes, which translates directly into shorter service intervals and lower indirect labour costs. The modest size also helps when retrofitting into machines or stands with limited space, enabling a tidy installation without major modifications. Clear compatibility and straightforward operating notes for workshop use Designed specifically for use with VHL halogen lamps, the unit is supplied by Vertex and is identifiable by SKU V-B15 and GTIN 4061905084447. For correct operation, the selected voltage must match the fixture and wiring; the transformer–bulb assembly is available in either 12 V / 50 W or 24 V / 50 W variants to suit different systems. When replacing the lamp, allow the bulb and transformer to cool before handling and ensure connections are secure. Metav’s stock handling and distribution from Emmerich provide a dependable supply chain, reducing lead times and supporting uninterrupted workshop operations. Contact Metav Werkzeuge in Emmerich for stock confirmation and technical advice on the V-B15 transformer and bulb — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V-B15 GTIN: 4061905084447 eClass: 27039101 Facts Weight: 0.009 kg Voltage / wattage: 12 V / 50 W; 24 V / 50 W Special features Compatible with VHL halogen lamp Brand: Vertex Images available: V-B15-main.png, V-B15-detail.png FAQ What voltage options are available for this transformer and bulb? The V-B15 transformer and bulb is available in two variants: 12 V / 50 W and 24 V / 50 W, allowing selection according to the fixture’s requirements. Is this unit compatible with VHL halogen lamps? Yes, the unit is specifically designed for compatibility with VHL halogen lamps and is supplied as a matched transformer-and-bulb assembly. How should the bulb be replaced to ensure safe operation? Allow the bulb and transformer to cool before touching, use appropriate gloves to avoid oil contamination, and ensure the correct voltage variant is fitted and electrical connections are secure. What identifies the product for ordering and stock checks? Order or request stock with SKU V-B15 or GTIN 4061905084447; the unit is supplied under the Vertex brand and listed in eClass 27039101. Is the unit suitable for tight or confined fixtures? Yes, the compact and lightweight design makes the assembly suitable for fixtures with limited space, facilitating retrofit and maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12V/6W LED Lamp Reinforced Arm 220x310mm, 220V - Vertex
Take advantage of a compact, energy-efficient LED unit with a 6W output and a reinforced 220 x 310 mm arm to improve inspection accuracy and reduce repositioning time; order the lamp directly via Metav Werkzeuge or ask for specification advice from our consultants. VLED-30M reinforced LED inspection lamp — 6W output, 220 x 310 mm arm (Vertex) A reinforced VLED-30M LED lamp designed for precise task illumination at inspection benches and production workstations. 6W LED light output for clear illumination Reinforced arm 220 x 310 mm for stable positioning Compatible with 220 V mains supply Robust build at 1.8 kg for industrial use Precise, energy-efficient illumination for inspection tasks The lamp delivers a 6W LED output operating from a standard 220 V mains supply while providing a low-voltage 12 V light source, combining safety with consistent brightness. The low-power LED design ensures energy-efficient operation and long service intervals compared with halogen alternatives. For quality control stations and visual inspection tasks, the stable light output supports reliable defect detection and reduces the need for repeat checks, contributing to smoother production flow and better throughput. Stable positioning that supports repeatable results An articulated arm measuring 220 x 310 mm and a reinforced support structure allow accurate placement and repeatable alignment across inspection cycles. The lamp’s mass (approximately 1.8 kg) contributes to mechanical stability, reducing vibration and drift during fine visual tasks. This stability translates into less operator fatigue and fewer readjustments, which is particularly advantageous in high-precision environments such as metrology benches, electronics assembly and small-part inspections. Built for workshop environments and simple integration The compact head and steady mounting geometry make the light unit suitable for integration beside microscopes, measuring fixtures and assembly jigs where localised illumination is required. The robust construction supports frequent handling and repositioning typical in busy workshops without compromising beam consistency. Clear, shadow-free illumination helps to speed up visual inspection and enhances the reliability of manual measurements and visual checks. Trusted sourcing and practical advantages for procurement Sourcing the unit from an established supplier reduces procurement risk: the lamp is a Vertex product and is listed with a clear SKU for ordering, streamlining stock control and replacement planning. Metav’s offering emphasises availability from the Emmerich warehouse, where quality is vetted for the European market; this supports predictable lead times and consistent restocking for production-critical lighting equipment. Contact Metav Werkzeuge in Emmerich for specification support on the Vertex VLED-30M and to confirm suitability for inspection benches — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VLED-30M Manufacturer: Vertex GTIN: 4061905094705 Eclass: 27110640 ETIM: EC001959 Facts Power supply: 220 V Light output: 12 V / 6 W Arm dimensions: 220 x 310 mm Weight: 1.8 kg Special features Reinforced version (verstärkt) Designed for workshop and inspection use SKU: VLED-30M FAQ What type of light source does the lamp use? The lamp uses a 6W LED light source; the Vertex VLED-30M provides a low-voltage 12 V output supplied from a 220 V mains input for consistent illumination. Is the arm suitable for precise positioning? Yes, the reinforced 220 x 310 mm arm on the VLED-30M provides stable positioning for repeatable inspection alignment and reduced vibration. Can the lamp be used on inspection benches beside microscopes? The compact head and steady mounting geometry of this Vertex lamp make it suitable for use alongside microscopes and measuring fixtures where localised, shadow-free illumination is required. How heavy is the unit and what does that mean for durability? At approximately 1.8 kg, the lamp offers a substantial feel that contributes to mechanical stability and resilience during frequent repositioning. Is this a Vertex product and is there an SKU for ordering? Yes, the lamp is a Vertex product listed under SKU VLED-30M, which simplifies ordering and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12x12x12" Angle Plate High-Strength Cast Steel 0.01mm Accuracy 42.9kg - Vertex
Benefit from the combination of high-strength cast steel construction and 0.01 accuracy for stable, repeatable right‑angle clamping; secure production quality and reliable set‑up stability. Order the angle plate directly via Metav Werkzeuge or ask our consultants for application advice. VR-1212 Angle Plate — precision right‑angle clamping in high‑strength cast steel VR-1212 is an angle plate designed for secure right‑angle clamping and repeatable machining setups in industrial workshops. High-strength cast steel construction Precision to 0.01 for repeatable setups Robust 42.9 kg base for stability Compact 12 x 12 x 12" footprint Consistent precision for demanding machining work The solid, high-strength cast steel body delivers dimensional stability that supports repeatable results in serial production. With an accuracy of 0.01, the component provides a verifiable baseline for right‑angle clamping and alignment tasks; this level of precision reduces the need for frequent re‑setting and helps maintain tolerances across batches. For those less familiar with metrology terms, accuracy 0.01 denotes a very small permissible deviation from the nominal right angle, ensuring components are clamped true to the machine axis and minimise rework. Stability that reduces vibration and movement A mass of 42.9 kg creates inertia that resists cutting forces and dampens vibration during milling and drilling operations. The heavy base contributes to a stable clamping platform, meaning tools and workpieces remain secure under load and surface finish improves as a direct consequence. In practice, a substantial base weight reduces micro‑movement and supports longer tool life, which in turn improves process economy in busy production environments. Integrating the angle plate into workshop workflows Engineered for fixture use on machine tables and in inspection stations, this angle plate simplifies set‑up times when paired with standard clamping elements. The robust material and precise faces allow the plate to serve as a repeatable datum for jigs and measuring operations. As part of a broader clamping strategy, the component supports quicker changeovers and consistent part quality, contributing to higher throughput and reduced downtime across shifts. Practical handling and upkeep for long service life Routine inspection of contact faces and a light cleaning regime preserve the precision and surface condition of the plate. The cast steel construction is durable but benefits from corrosion protection in humid environments; occasional lubrication of clamping interfaces and safeguarding of mounting surfaces will keep the plate performing to specification. When integrated into regular maintenance cycles, the tool extends its operational life and sustains the repeatability required for precision production. Contact Metav Werkzeuge in Emmerich to discuss how the Vertex VR-1212 angle plate can improve machining stability and process repeatability — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and local supply Technical data SKU: VR-1212 GTIN: 4061905092329 eClass: 21170130 Facts Dimensions: 12 x 12 x 12" Weight: 42.9 kg Accuracy: 0.01 Special features Material: high-strength cast steel Product images available FAQ What materials is this angle plate made from? The angle plate is manufactured from high‑strength cast steel, chosen for its dimensional stability and rigidity in machining applications. How precise is the VR-1212 for setup and alignment? The VR-1212 offers accuracy of 0.01, providing the repeatability needed for precise right‑angle clamping and consistent part quality. Is the plate suitable for heavy cutting operations? With a mass of 42.9 kg, the plate provides substantial stability and damping for many machining tasks; suitability for specific cutting forces should be assessed against the machine and clamping system in use. Can the angle plate be used as a datum in inspection fixtures? Yes, the precision faces and rigid construction make it suitable as a repeatable datum for inspection and jigging applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12x20x10mm Block for Guide Rail, M4 T-Slot, S45C Steel, Set of 4 - Vertex
Take advantage of a compact, robust guide-rail block that combines precise dimensions, machinable S45C steel and a threaded M4 fixing for reliable fixture assembly; order components directly via Metav Werkzeuge or request specialist advice from the consultants. Block 12TO12 – Guide-rail block, compact 12 × 20 × 10 mm (Vertex) A Block 12TO12 engineered as a compact guide-rail block for precise positioning and secure mounting in fixtures and small-scale assemblies Compact dimensions 12 x 20 x 10 mm Machined from S45C structural steel Threaded T-slot M4 for secure mounting Supplied as a set of 4 components Precise alignment in minimal space The compact 12 x 20 x 10 mm footprint delivers accurate positioning where space is restricted, ensuring consistent alignment without bulky hardware. Manufactured from S45C, a medium-carbon steel known for its machinability and strength, the component provides a stable base for repetitive operations and light assembly tasks. The design focuses on dimensional consistency and precision, reducing set-up time and minimising the need for frequent re-adjustments in jigs and fixtures. Secure fixing and straightforward integration A threaded T‑slot with M4 engagement enables direct, vibration-resistant fastening to standard guide rails and carrier plates. Supplied as a set of 4, the components simplify procurement for multi-point installations and replace worn blocks in matched groups to maintain parallelism. At 0.07 kg per block the low mass aids handling and keeps dynamic loads low, which benefits automated or semi-automated setups where minimised moving mass improves cycle stability. Robust performance for workshop use Designed for everyday workshop and light industrial environments, the block combines a machinable base material with a finish suitable for sliding and clamping applications on guide rail systems. The construction balances wear resistance with the ability to be reworked or adapted on conventional machine tools, supporting long service life and straightforward maintenance. The Vertex provenance signals consistent production standards, while compatibility with common mounting conventions keeps integration predictable and efficient. For technical clarification or to discuss suitability of Vertex components for specific fixtures, contact Metav Werkzeuge for expert guidance via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 12TO12 GTIN: 4061905084003 eClass: 23300402 Core specifications Dimensions: 12 x 20 x 10 mm Weight: 0.07 kg Mounting thread: M4 T-slot Pieces per set: 4 Materials & features Material: S45C Intended use: for guide rail applications Supply configuration: set of 4 Manufacturer: Vertex FAQ What is the primary application of this block? The Vertex Block 12TO12 is intended as a compact guide‑rail block for positioning and secure mounting in fixtures, jigs and small assemblies. Is the block sold individually or as a set? The component is supplied as a set of 4, allowing immediate multi-point installation or matched replacements. Which material is used and what are the benefits? Made from S45C, the block offers a balance of machinability and tensile strength, making it suitable for workshop machining and rework if required. Which thread and mounting standard does it use? The block features a threaded T‑slot with M4 engagement, compatible with common guide‑rail fastening practices. Can the block be used on non-ferrous rails such as aluminium? The Vertex Block 12TO12 is primarily specified by material and thread; compatibility with aluminium or other rail materials depends on the assembly design and is typically achievable with appropriate fasteners and surface treatments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12x8x9" Positioning Angle Block, High-Strength Cast Steel, 19.4kg - Vertex
The combination of a robust right-angle design, high-strength cast steel construction and substantial mass ensures stable, vibration-damped clamping for machining and inspection tasks; order the component directly via Metav Werkzeuge or consult the technical team for application advice. VR-120 angle plate by Vertex — high-strength cast steel, stable right-angle support The VR-120 angle plate provides stable right-angle clamping for machining, inspection and setup operations in metalworking and precision workshops. Robust high-strength cast steel construction Stable mass for vibration damping Right-angle accuracy for fixture alignment Compact footprint: 12 x 8 x 9" Stable clamping for consistent machining results The angle plate is engineered to deliver consistent right-angle support, translating into repeatable setups and fewer repositioning steps during production. Made from high-strength cast steel, the component's mass and rigidity reduce chatter and improve surface finish when used as a fixed clamping reference. For workshop managers and process engineers, this means more predictable cycle times and reduced scrap rates. The right-angle geometry supports perpendicular workholding and simplifies alignment when combining multiple fixtures. Durability that lowers maintenance effort A construction based on high-strength cast steel brings resistance to deformation and long service life under regular machining loads. The material choice offers high dimensional stability and contributes to maintenance intervals that are easier to plan and predict. This robustness supports continuous production environments and reduces the likelihood of unplanned downtime related to fixture wear. The solid design also aids in repeatable measuring and inspection tasks where fixture stability is critical. Improved precision handling and integration into workflows The component's design yields precision benefits in setup and inspection workflows: repeatable fixturing reduces measurement uncertainty and accelerates changeover between parts. The compact footprint (12 x 8 x 9") and mass of 19.4 kg ensure the plate stays anchored during clamping operations, while the right-angle faces provide reliable datum surfaces for jigs and gauges. Integrating the plate into modular fixturing systems supports lean production by simplifying reference transfer between machines and inspection benches. Contact Metav Werkzeuge today for tailored advice on integrating Vertex's VR-120 angle plate into production or inspection workflows and benefit from our Emmerich-based quality filter and logistics expertise Technical data SKU: VR-120 GTIN: 4061905094576 Manufacturer: Vertex Facts Weight: 19.4 kg Dimensions: 12 x 8 x 9" ECLASS: 21020601 Special features Material: high-strength cast steel Designation: Angle plate (Aufspannwinkel) FAQ What is the primary purpose of this angle plate? The VR-120 angle plate by Vertex is designed as a right-angle clamping reference for machining, inspection and fixture setups, providing stable perpendicular surfaces for accurate workholding. What material is used for the construction? The component is manufactured from high-strength cast steel, chosen for rigidity and long-term dimensional stability. What are the physical dimensions and mass of the plate? Dimensions are 12 x 8 x 9" with a mass of 19.4 kg, giving the plate sufficient weight for vibration damping and stable clamping. Can the plate be used for inspection as well as machining? Yes, the VR-120 supports inspection applications by offering reliable datum surfaces and stable mounting for gauges and measuring tools. How does the design influence production efficiency? The right-angle geometry and solid construction reduce setup time and repositioning, improving throughput and repeatability in machining and measuring operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
13-48mm Clamping Wedge for T-Slot 16mm with M16x125 Clamping Screw, 18mm Width - AMF
Take advantage of the combination of secure clamping, simple adjustability and a compact footprint for reliable fixturing in production and workshop environments; the compact M16 clamping screw, compatibility with T‑slot 16 mm and the adjustable clamp height 13–48 mm make repeatable set‑ups straightforward. Order the AMF Nr. 6314V clamping jaw directly via Metav Werkzeuge or ask our consultants if needed. Nr. 6314V Clamping Jaw — T‑slot 16 mm, adjustable height 13–48 mm (AMF) The Nr. 6314V clamping jaw is designed for machine tables and fixtures with a 16 mm T‑slot and provides a narrow 18 mm contact face for compact workholding in confined setups. Adjustable clamp height 13–48 mm Designed for T‑slot 16 mm Sturdy 18 mm clamp width Supplied with M16 x16 x125 screw Secure clamping for precise machining A compact clamping element with an M16 clamping screw delivers dependable holding force while the adjustable clamp height of 13–48 mm permits accommodation of varying workpiece thicknesses. This combination reduces re‑set times and minimises slippage during machining cycles, which improves process stability. The narrow contact profile maintains access to neighbouring operations and supports precise, repeatable workholding on assembly and milling tables. Quick integration into standard fixturing Fitting a 16 mm T‑slot is the core function of this clamping solution; the T‑slot 16 mm compatibility ensures plug‑and‑play alignment with common machine tables and fixture systems. The 125 mm overall length and compact 18 mm width balance reach and clearance, enabling rapid clamping without interfering with surrounding tooling. The supplied M16 x16 x125 clamping screw streamlines installation and avoids separate procurement of fasteners. Robust design that supports uptime and simple handling Built for repetitive use in workshop and light industrial environments, the component combines a straightforward geometry with proven thread size for predictable torque‑to‑holding results. The clamping jaw’s dimensions and included screw mean fewer separate parts to manage, supporting efficient inventory and faster set‑up. For unfamiliar terms: a T‑slot is the standard dovetail‑like track on machine tables that guides and locates clamping elements; the clamp height range denotes the vertical span the jaw can bridge between the table and the workpiece. For specification checks or to confirm fitment for a specific table or fixture, contact Metav Werkzeuge — our specialists will advise on the AMF Nr. 6314V clamping jaw and assist with supply and delivery from Emmerich; eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: 4000833074NW Type: Nr. 6314V Product: Clamping jaw Brand: AMF Packaging unit: 1 Dimensions & core data Clamping height: 13–48 mm T‑slot: 16 mm Width: 18 mm Thread: M16 Overall length: 125 mm Supplied screw: M16 x16 x125 mm A: 25 B2: 50 E1: 26 E2: 45 LS: 55 Special features Supplied clamping screw M16 x16 x125 mm Compatible with T‑slot 16 mm systems Compact 18 mm clamp face for tight setups Adjustable clamp height for variable workpiece thickness FAQ What T‑slot size does this clamping jaw require? The clamping jaw is designed for a T‑slot 16 mm and integrates directly with machine tables and fixtures using that slot dimension. Is a clamping screw included with the item? Yes, the delivery includes a M16 x16 x125 clamping screw for immediate installation with the AMF Nr. 6314V clamping jaw. What range of clamping heights is possible? The adjustable clamp height spans 13–48 mm, allowing the jaw to bridge a variety of workpiece thicknesses without additional spacers. Can this jaw be used in compact fixtures with limited lateral space? The narrow 18 mm clamp width and 125 mm overall length make it suitable for confined layouts where neighbouring clamps or tools are close. Are the dimensional values A, B2, E1, E2 and LS provided? Yes; the component’s auxiliary dimensions are: A: 25, B2: 50, E1: 26, E2: 45, LS: 55, which assist in precise fixture planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1300mm Torsion Spring For Milling Machines - Vertex
Combine the Ø43×0.6×25 mm precision with a lightweight 0.16 kg profile to ensure straightforward integration into milling assemblies; the Vertex component delivers consistent mechanical behaviour and is available via Metav Werkzeuge for reliable European supply. Order the part directly through Metav Werkzeuge or consult their specialists if further application details are required. VSP-R8 Torsion Spring for milling machines — Ø43×0.6×25 mm | Vertex The VSP-R8 is a torsion spring intended for use in milling machines, engineered to provide a compact, precision-controlled rotational force for mechanical subassemblies. Compact precision dimensions Ø43×0.6×25 mm Designed for milling machines Lightweight 0.16 kg for easy handling Proven Vertex component quality Precise fit that reduces setup uncertainties The component is manufactured to precision dimensions, listed as Ø43×0.6×25 mm, which allows it to be specified confidently where axial spacing and torque characteristics are critical. In workshop environments where tolerances are tight, a spring with consistent geometry will reduce adjustment time; measurable dimensions permit direct comparison with existing parts and simplify ordering for maintenance cycles. Where interchangeability is required, the documented geometry serves as a verifiable reference point. Practical handling and predictable performance With a listed mass of 0.16 kg, the element is lightweight, making replacement and handling in confined machine areas easier and safer. The spring has been designed so that installation can be carried out with standard tools and minimal fixture changes; this practical approach helps to keep machine downtime low. Because the part is a discrete mechanical component, wear behaviour is predictable and can be planned for in preventive maintenance schedules rather than leaving adjustments to chance. Integration into machine assemblies with clear expectations Compatibility with milling equipment is supported by the component’s declared purpose for milling machines and its compact form factor. Specifying this torsion spring means the required angular preload and mounting envelope are already considered, which simplifies parts lists and assembly documentation. Where definitive torque or material data are required for finite-element checks or regulatory documentation, the dimensional certainty provided here establishes a solid starting point for further technical validation. Supply reliability and sourcing advantage Sourced under the Vertex brand, the part benefits from an established supply chain and consistent part identification, which reduces procurement friction. Stocks are distributed through Metav Werkzeuge in Europe, a partner that positions itself as a "quality filter" for precision tools and parts; that relationship supports predictable restocking and traceable deliveries. For operations seeking to consolidate suppliers, this arrangement contributes to a more resilient procurement strategy without sacrificing component traceability. Contact Metav Werkzeuge to secure Vertex VSP-R8 torsion springs for milling applications and to verify compatibility with existing assemblies — supplied from Emmerich with professional consultation available Technical Data Article number: VSP-R8 GTIN: 4061905083334 Designation: Torsion spring Brand: Vertex Facts Dimensions: Ø43×0.6×25 mm Weight: 0.16 kg Length value: 1300 Special features Application: for milling machines Category: Vertex Gallery images available FAQ What are the exact external dimensions of the spring? The VSP-R8 is specified with dimensions of Ø43×0.6×25 mm, which define the outer diameter, wire thickness and usable axial length. Is the torsion spring suitable for milling-machine use? Yes — the part is designated for use with milling machines; compatibility with a specific machine should be confirmed against the listed dimensions and mounting arrangement. How much does the component weigh? The component has a mass of 0.16 kg as provided in the product data. Who manufactures the part and how is it identified? The spring is a Vertex product identified as VSP-R8 with GTIN 4061905083334. Are photos and detailed views available before ordering? Gallery images are provided for the item and can be used to check form and fit visually before procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
130mm Clamp Jaw No. 6313K for T-Slot 16+18mm, Clamping Height 0-55mm - AMF
Combining a compact total length of 130 mm with compatibility for T‑slot 16 + 18 mm, this clamping jaw delivers flexible fixturing and a wide clamping height range of 0–55 mm for varied workpieces. Order the component directly via Metav Werkzeuge or consult our specialists for integration support. Nr. 6313K clamping jaw — T‑slot 16 + 18 mm, clamping height 0–55 mm (AMF) A Nr. 6313K clamping jaw engineered for secure fixture in standard machine table T‑slots, offering adaptable height adjustment and straightforward integration with M16 clamping hardware. Fits T‑slot 16 + 18 mm Clamping height 0–55 mm Compatible with M16 clamping studs Total length 130 mm Versatile T‑slot compatibility for faster set‑ups The design targets rapid adaptation to common machine tables: the jaw accepts both 16 mm and 18 mm T‑slots, enabling fewer tool changes and condensed set‑up times. For workshop planners, this reduces the need for multiple specialised jaws and simplifies inventory. The geometry is optimised for standard clamping studs, so the component integrates smoothly into existing fixturing systems and supports repeatable positioning with minimal rework. Secure clamping across a wide height range Variable clamping is delivered through a broad clamping height range (0–55 mm) and defined axial offset (B2: 56 mm) that allow reliable contact with irregular or stepped workpieces. This range ensures firm contact pressure while maintaining accessibility for machining operations. The controlled height span improves stability during cutting or milling, helping to reduce vibration and improve surface finish in serial or single‑piece production. Compact form and straightforward installation With a total length of 130 mm and a nominal width of 18 mm, the jaw offers a compact footprint without sacrificing clamping surface area. The compact dimensions suit congested fixtures and make it simple to replace or rearrange elements on a machine table. Compatibility with M16 clamping hardware means existing studs and screws can be reused, lowering procurement effort and shortening downtime during changeovers. For precise, reliable fixturing with AMF components, contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603003NW Model: Nr. 6313K Label: Spannpratze Nr.6313K Gr.18 f.T‑Nut 16+18mm Spann‑H.0‑55mm AMF Facts T‑slot compatibility: 16 + 18 mm Width: 18 mm Total length: 130 mm Clamping height H1: 0–55 mm Secondary height H2: 42–84 mm Axial offset B2: 56 mm Suitable for: M16 Special features Product type: clamping jaw Brand: AMF Packaging unit: 1 SKU: 4000603003NW FAQ Is the jaw suitable for both 16 mm and 18 mm T‑slots? Yes. The clamping jaw is designed for T‑slot 16 + 18 mm, allowing it to be used on machine tables with either slot size. What clamping height can be achieved with this component? The jaw supports a clamping height range of 0–55 mm, providing flexibility for a variety of workpiece profiles. Can existing M16 studs be used with this jaw? Compatibility with M16 clamping studs is specified, so existing M16 hardware can generally be used for installation. What are the key installation dimensions to check before fitting? Refer to the total length 130 mm, width 18 mm, and the axial offset B2: 56 mm to ensure correct fit and clearance in the fixture layout. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
130mm Insert Prism Gr. B Clamping Ø 20mm For Quick-Change Holder - TECWERK
Take advantage of precise radial clamping and straightforward compatibility in one compact component; the prism insert delivers steady engagement for round shank bars and integrates easily with interchangeable holders — order the part directly via Metav Werkzeuge or consult the team for application advice. TECWERK Prism Insert Size B — 20 mm clamping Ø, 130 mm length The Prism Insert Size B secures round shank bars in interchangeable holders, providing repeatable radial positioning for machining and assembly tasks. Prism insert Size B compact design Clamping Ø 20 mm for round shanks Length 130 mm for stable engagement For interchangeable holders with prism Secure, repeatable clamping for round shank bars A prism insert is designed to transform a conventional holder into a reliable radial clamping system. This insert uses a V-shaped contact geometry to centre and stabilise cylindrical shanks, producing consistent axial alignment and reduced runout. With a clamping diameter of 20 mm and a length of 130 mm, the component offers a balance of engagement depth and compact form, helping to maintain machining accuracy without excessive overhang. The design reduces setup variability and supports efficient changeovers in production environments where consistent part positioning is critical. Compatibility with interchangeable holders and easy integration Engineered for use with interchangeable holders, the insert fits into standard prism-equipped change holders and adapts those assemblies for round shank components. The item is sized as Size B, which indicates the dimensional family and ensures predictable fitment in matching holder systems. Installation requires straightforward insertion into the prism pocket of the holder; once located, the insert provides an immediate clamping interface for cylindrical tooling or workpieces. This approach minimises the need for bespoke fixtures and simplifies inventory of clamping elements across different machines. Practical benefits for workshop and production use Adopting a prism insert for routine clamping tasks delivers operational advantages: improved repeatability, reduced rework and less time spent on manual alignment. The moderate length confers stability under light to medium loads while keeping the overall assembly compact for confined setups. For operations handling multiple identical shafts or bars, the insert supports rapid, consistent seating that preserves tool life and contributes to predictable cycle times. The component is particularly suited to setups where radial precision matters more than heavy axial loading. What to consider during selection and use When selecting a prism insert, confirm the holder compatibility and verify the effective clamping range after installation — here the system provides a maximum clamping Ø of 20 mm for round shank bars once the insert is in place. Size family (B) should match the holder specification to avoid play. Although this insert delivers precise radial support, its suitability for a specific machining task depends on load direction and cutting forces; match the component to the intended application to ensure optimal performance. For tailored advice on integrating TECWERK prism inserts into existing toolholding systems, contact Metav Werkzeuge in Emmerich for application guidance and parts availability — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000832142NW Manufacturer: TECWERK Product type: Prism insert (Einlegeprisma) Size designation: B Data Clamping diameter: 20 mm Length: 130 mm Packaging unit: 1 Special features For interchangeable holders with prism For round shank bars Clamping Ø = max possible clamping Ø after prism insertion FAQ How does the prism insert improve concentricity compared with plain clamping? The prism insert centres round shank bars by V-shaped contact surfaces, so the TECWERK prism insert Size B reduces radial runout and provides more consistent concentricity than unsecured seating. Which holder types accept this prism insert? The component is intended for interchangeable change holders equipped with a prism pocket; compatibility requires a Size B receptive pocket in the holder for correct seating. What is the maximum shank diameter that can be clamped with this insert? After the prism insert is fitted in the holder, the effective maximum clamping diameter is 20 mm for round shank bars. Is the prism insert suitable for heavy axial loads? The insert provides stable radial support and moderate axial stability; for heavy axial forces, verification against holder and application constraints is recommended before use. Can the insert be used for repeatable production indexing? Yes — the repeatable seating and centring behaviour of the prism insert supports consistent positioning across multiple workpieces in serial production. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
130mm Pneumatic Clamp With Massive Holding Arm, 95° Angle, 5 000 N Hold - Kukamet
A robust pneumatic toggle clamp with a 130 mm arm and galvanised construction delivers dependable, repeatable clamping with high force capacity. Combining a massive holding arm, a horizontal base for simple fixture mounting and 4,500 N clamping / 5,000 N holding forces supports secure workholding — order the 611 Pneumatic Toggle Clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 611 Pneumatic Toggle Clamp — 130 mm arm, galvanised, horizontal base The 611 Pneumatic Toggle Clamp is a durable pneumatic clamping solution designed for jigs, fixtures and automated production where secure, repeatable holding is required. Massive holding arm for secure clamping 130 mm arm for extended reach Galvanised body resists corrosion Horizontal base for simple fixture mounting Reliable pneumatic performance for repeatable production The pneumatic drive provides fast, controlled clamping cycles with consistent results. Equipped to deliver 4,500 N clamping force and 5,000 N holding force, this toggle clamp allows shorter cycle times and reduced rework through stable part retention. Pneumatic actuation ensures the force is applied smoothly and can be integrated with existing compressed-air control systems, offering a measurable improvement in process reliability for repetitive assembly or machining tasks. Built for heavy-duty use and long service life Thanks to a massive holding arm and galvanised finish, the 611 model is made to withstand harsh workshop environments and frequent operation. The robust arm reduces deflection under load, which translates into improved positional accuracy and fewer rejects. The corrosion-resistant coating prolongs component life and lowers maintenance frequency, supporting predictable uptime in metalworking and assembly lines. Simple integration into fixtures and automation The clamp’s horizontal base simplifies mounting to plates, jigs or modular fixturing systems and the 130 mm arm provides extra reach where clearance is limited. An operating angle of 95° facilitates a reliable over-centre lock typical for toggle clamps, so the force is maintained even if pneumatic pressure varies momentarily. Clear reference values such as clamping and holding forces make it straightforward to match the clamp to the required workpiece loads during design and procurement. Trusted supply and practical support from Metav Metav combines decades of industry experience with a broad product range to make precision workholding accessible for workshops and production sites. The partnership backing ensures transparent logistics from Emmerich and a practical supply chain for repeat orders, helping to keep fixtures stocked and production uninterrupted. For complex applications, technical advisors can confirm compatibility and suggest mounting or control adaptations to meet specific process requirements. For robust pneumatic clamping from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and fast delivery on the 611 model — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: 611-5-D-C1 Model: 611 ETIM: EC011973 ECLASS: 21021004 Facts Arm length: 130 mm Operating angle: 95° Max clamping force: 4,500 N Max holding force: 5,000 N Special features Material: galvanised Mounting: horizontal base Massive holding arm Pneumatic actuation (toggle clamp) Category: Toggle clamp FAQ Which materials can the clamp handle reliably? The 611 Pneumatic Toggle Clamp from Kukamet is designed for general industrial use; its massive holding arm and galvanised body make it suitable for standard metal and fixture materials in production environments. How much clamping force does the clamp provide? Specified clamping and holding forces are 4,500 N (clamping) and 5,000 N (holding) for the Kukamet 611, providing clear guidance when matching the clamp to workpiece loads. How is the clamp mounted in a fixture? The clamp uses a horizontal base for straightforward plate mounting; designers can fasten the base directly to jigs or subplates for rapid integration. Is the clamp suitable for automated cycles? Yes. Pneumatic actuation and the toggle lock mechanism make the 611 model appropriate for automated and semi-automated applications where repeatable, fast clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Semi-Universal Dividing Head With 5" Chuck, MT-2 Spindle - Vertex
Take advantage of a compact combination of precise angular indexing, a robust 5" chuck and an MT‑2 mounting for reliable setup and repeatable results. Order the indexing head directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Indexing head BS-0-J-5 – Semi‑universal dividing head with 5" chuck and MT‑2 taper (Vertex) The Indexing head BS-0-J-5 is a semi‑universal dividing head designed for precise angular indexing and machining set‑ups on milling and drilling equipment. Semi‑universal design for versatile use Integrated 5" chuck for secure clamping MT‑2 taper mounting for common spindles Stable 130 mm diameter body for low vibration Precise indexing that improves workflow The semi‑universal dividing head provides accurate angular positioning for repetitive machining operations, reducing setup time and minimising alignment errors. Its integrated 5" chuck secures workpieces during rotation, while the MT‑2 taper ensures a straightforward mechanical interface with many conventional spindles. For workshops focused on repeatability and throughput, the device offers a clear efficiency advantage, transforming manual dividing tasks into reliable, measurable processes. Robust design for stable machining results Constructed for heavy‑duty workshop use, the unit’s mass and geometry contribute to vibration damping and stable cutting conditions. The 130 mm diameter body and overall build deliver the rigidity required for precise finishing and indexed milling. Compatibility with a range of workpiece shapes is supported by the semi‑universal concept, which accommodates common clamping needs while maintaining concentricity and surface quality under load. Practical integration and application scope Mounting on standard spindles via the MT‑2 taper allows rapid installation and removal between jobs, helping to maintain machine uptime. Typical applications include angular division, slotting, spline work, and small gear prototyping where exact positioning is essential. The compact form factor and dependable clamping reduce repositioning effort, enabling consistent part quality and predictable cycle times with lower rework rates. Contact Metav Werkzeuge for tailored advice on the Vertex BS-0-J-5 indexing head and receive guidance on machine compatibility and ordering options Technical data SKU: BS-0-J-5 GTIN: 4061905089367 Brand: Vertex Diameter: 130 mm Weight: 24 kg ECLASS: 21020590 Semi‑universal dividing head MT‑2 taper mounting Supplied with 5" chuck Model designation: BS-0-J-5 FAQ What machines is the BS-0-J-5 suitable for? The BS-0-J-5 indexing head is intended for use on milling machines and drill spindles that accept an MT‑2 taper and benefit from a semi‑universal dividing head for angular indexing. Is the 5" chuck included with the unit? Yes, the Vertex BS-0-J-5 is supplied with a 5" chuck as a standard feature to ensure immediate clamping capability. How does the MT‑2 taper affect mounting? The MT‑2 taper on the BS-0-J-5 provides a conventional, mechanically secure interface for quick installation on compatible spindles and tailstocks. What kind of workpieces can be processed with this dividing head? The semi‑universal design of the BS-0-J-5 supports a wide range of small to medium workpieces for dividing, slotting and precision angular machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
130mm Semi‑Universal Dividing Head Three-Point, MT2 Taper, 40:1 Ratio, 90° Tilt, 130mm Flange Diameter - Vertex
Take advantage of the combination of precise angular control, robust construction and multi-position capability for reliable indexing in production and workshop tasks; order the Vertex BS-0 directly via Metav Werkzeuge or consult our specialists for application advice. Vertex BS-0 Semi-Universal Dividing Head — 40:1 gear ratio & MT2 taper BS-0 is a semi-universal dividing head for precise indexing and indirect cutting operations on milling machines and drill presses, suitable for vertical and horizontal use Semi-universal design for versatile indexing 40:1 gear ratio for fine angular control 130 mm divider flange for larger workpieces Hardened, ground worm and tapered bearings Accurate angular control for repetitive machining The dividing head delivers repeatable results through its gear ratio 40:1, which enables fine subdivision of rotations with minimal backlash. This level of control reduces rework and shortens setup time when producing evenly spaced features such as gear teeth, bolt circles or fluted profiles. The mechanism’s smooth indexing contributes to consistent finishing results, translating machine capability into measurable production reliability. Flexible mounting and multi-plane operation With an axis height 100 mm and a 130 mm divider flange, the unit accommodates a wide range of workpiece sizes while remaining compact. The head permits dividing in both vertical and horizontal positions and offers a tilt of ±90° for inclined indexing operations. Indexing plates allow subdivision of the circumference into 15–49 parts, which supports common workshop tasks without the need for additional adapters or complex calculations. Built for endurance and precision Critical load-bearing elements are designed for longevity: the unit features a hardened and ground worm and precision tapered roller bearings, providing durable meshing and stable rotation under intermittent loads. The internal MT2 Morse taper enables secure tool or mandrel mounting, while multiple fixing holes accept 16 mm fasteners for rigid attachment to machine tables. The overall mass of 19 kg contributes to vibration damping during cutting, improving surface finish quality. Practical setup and supplied accessories The dividing head arrives with practical accessories and interface features to speed integration: the accessory set includes a TS-1 tailstock, indexing plates, a flange and an MT2 centring tip, simplifying alignment and concentric mounting of work. A base 160 x 91 mm facilitates stable positioning on most machine tables, and the total unit height of 173 mm helps plan clearances during multi-axis operations. These options make the device a versatile indexing solution for both prototype work and small-series production. For precise indexing in the workshop, rely on Metav Werkzeuge to source the Vertex BS-0 and request tailored advice from our technical consultants in Emmerich for an efficient integration into existing machinery. Technical data Article number: BS-0 GTIN: 4061905083273 Manufacturer: Vertex Core technical data Dimensions: 188 x 160 x 173 mm Weight: 19 kg Axis height: 100 mm Divider flange diameter: 130 mm Gear ratio: 40:1 Base size: 160 x 91 mm Fixing hole size: 16 mm Special features Semi-universal dividing head for indirect cutting Smooth tilting 90° for angled indexing Dividing possible in vertical and horizontal position Dividing discs allow 15–49 part divisions Internal MT2 Morse taper for centring/fixtures Accessories: TS-1 tailstock, flange, centring tip Hardened and ground worm Precision tapered roller bearings FAQ What machines is this dividing head compatible with? The Vertex BS-0 dividing head is suitable for use on milling machines and drill presses where an MT2 spindle or appropriate adaptor is provided for secure mounting. How fine can the indexing be with this unit? Indexing is achieved via the 40:1 gear ratio and the supplied dividing discs, enabling divisions of the circumference into 15–49 parts for common workshop requirements. Can the head be tilted for angled work? Yes, the unit provides smooth tilting up to ±90°, allowing indexed features to be produced at inclines as required. Which accessories are included or recommended? Standard accessories shown in the product gallery include a TS-1 tailstock, dividing discs, a flange and an MT2 centring tip; these simplify setup and ensure concentric clamping. Is the construction suitable for heavy-duty workshop use? The presence of a hardened and ground worm together with precision tapered roller bearings and a mass of 19 kg make the head robust for repeated workshop tasks while damping vibration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
130mm Vertical Clamp 5,000N Holding Force, Massive Arm With Safety Lock - Kukamet
Take advantage of a robust, zinc-plated vertical toggle clamp that combines a massive holding arm with a reliable safety latch to secure workpieces and maintain steady production. The unit delivers a high holding force while remaining compact and lightweight for easy fixturing; order via Metav Werkzeuge or consult our advisors for application support. 211 Vertical Clamp — Zinc-plated vertical toggle clamp with 5,000 N holding force The 211 Vertical Clamp is a sturdy vertical toggle clamp intended for secure fixturing in machining, welding and assembly environments, offering a compact footprint and high repeatable clamping performance. Zinc-plated construction for corrosion resistance 130 mm robust holding arm Maximum holding force 5,000 N Horizontal mounting foot for stable attachment Consistent clamping performance for productive workflows The 211 vertical clamp delivers measured forces that translate into reliable part retention on fixtures and jigs. With a maximum holding force of 5,000 N and a maximum clamping (pressing) force of 4,500 N, the clamp provides defined mechanical limits that aid in process planning and safety assessments. These figures are useful for selection when a specific retention load is required; the distinct separation between pressing and holding values clarifies the expected behaviour during actuation. The robust force characteristics support repeatable positioning, reducing rework and contributing to improved throughput in repetitive production tasks. Durable construction that reduces maintenance and downtime Built from zinc-plated material and featuring a massive holding arm, the clamp resists surface corrosion and mechanical wear in workshop environments. The horizontal mounting foot affords a secure connection to fixtures or plates, while the integrated safety latch prevents accidental release when clamped. Together, these design features extend service intervals and lower the likelihood of unexpected stoppages. The compact mass (approx. 1.51 kg) makes the clamp easy to handle during set-up without compromising structural integrity, supporting quicker changeovers and safer handling on the shop floor. Practical integration across fixturing and assembly applications As a vertical toggle-style clamp, the unit operates with a lever mechanism that transforms manual actuation into a stable clamping action, enabling quick part placement and removal while maintaining repeatable clamping geometry. The 130 mm arm provides reach for a range of workpiece sizes, and the zinc-plated finish eases cleaning and inspection routines. The clamp is suited to fixtures used in small-batch production, welding benches and assembly stations where fixed-position retention and rapid cycle times are valued. For clarification on specific mounting details or compatibility with existing jigs, technical consultation is available to ensure correct integration. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 211 vertical clamp into production setups or request technical guidance from our Emmerich team for application-specific recommendations Technical data Article number: 211-5-D-L-C1 GTIN: 8680731501438 eClass: 21041717 ETIM: EC011973 Facts Weight: 1.51 kg Arm length: 130 mm Max pressing force: 4,500 N Max holding force: 5,000 N Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Safety latch Product type: vertical toggle clamp FAQ What holding and clamping forces does the 211 provide? The 211 vertical clamp offers a maximum holding force of 5,000 N and a maximum clamping (pressing) force of 4,500 N, values that support secure fixturing in repetitive tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal foot that allows stable attachment to fixture plates and jigs; the Kukamet 211 vertical clamp is designed for straightforward bolting to standard workbenches or fixture bases. Does the clamp include any safety features to prevent accidental release? Yes, the clamp includes a safety latch that secures the lever in the closed position, reducing the risk of unintended opening during handling or vibration. What materials and environments suit this clamp? The zinc-plated construction and robust arm make the clamp suitable for general workshop and light industrial environments where corrosion resistance and mechanical durability are required for assembly and machining fixtures. What are the physical dimensions and handling characteristics? The clamp has a 130 mm holding arm and an overall weight of approximately 1.51 kg, offering a balance between reach and manageable handling during set-up. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com