Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
250x500mm Magnetic Chuck 26N Magnet Force, 50mm Height - Vertex
Take advantage of the combination of high holding power, robust construction and a compact profile to improve machining repeatability; order the clamping solution directly via Metav Werkzeuge or consult the advisers for technical guidance. Magnetic Clamping Plate VG-1020 — 250 x 500 mm working surface, 50 mm height (Vertex) The Magnetic Clamping Plate VG-1020 is a workshop-grade magnetic chuck designed for secure workholding during milling, grinding and light turning operations in production and toolrooms. 250 x 500 mm working surface 50 mm plate height Robust 50.3 kg construction Consistent clamping for repeatable machining results A magnetic chuck delivers fast, reproducible workholding that reduces set-up time and minimises part distortion. The VG-1020 combines a substantial working surface with a low-profile 50 mm height to keep the machining centre of gravity stable while allowing good access for cutting tools. The measured magnetic force ensures reliable contact across the entire plate, which translates into higher repeatability between batches and fewer rework cycles. For workshops that prioritise cycle stability, this magnetic clamping solution supports steady, measurable improvements in throughput. Robust design that supports industrial workflows Heavy-duty construction provides a secure base for demanding tasks: the plate’s mass of 50.3 kg enhances vibration damping and helps maintain clamp integrity under load. The solid build reduces chatter and supports consistent surface finish quality when paired with standard milling or grinding processes. The combination of robust construction and a substantial work area enables longer uninterrupted machining runs, benefiting production environments where downtime for re-clamping is costly. Clear integration into existing fixtures and processes The plate’s rectangular 250 x 500 mm format is compatible with common machine table sizes, simplifying fixture planning and reducing the need for bespoke adaptors. The relatively low profile supports flexible fixturing, making it possible to use conventional parallels and supports without compromising the clamping field. Where magnetic workholding is preferred for speed and non-invasive contact, this clamping plate offers a pragmatic balance between accessibility and secure retention. Maintenance and reliability for continuous use Magnetic chucks require routine inspection and cleaning rather than complex maintenance procedures. With periodic surface cleaning and avoidance of heavy contaminants, the unit maintains its holding power and service life. The plate’s design emphasises longevity and predictable performance, helping workshops plan maintenance intervals in line with production schedules rather than reacting to unexpected failures. This predictability supports better planning and cost control over the lifecycle of the tool. Contact Metav Werkzeuge today for tailored advice on integrating the Vertex magnetic clamping plate into workshop operations and to discuss suitability for specific machining tasks Technical Data Article number: VG-1020 GTIN: 4061905086441 ECLASS: 21020809 Facts Dimensions: 250x500mm Height: 50mm Weight: 50.3 kg Magnetic force: 26 Special features Brand: Vertex UID: VG-1020 Image asset: vg-407-main.jpg FAQ How does a magnetic clamping plate improve setup times? A magnetic clamping plate, such as the Magnetic Clamping Plate VG-1020 from Vertex, reduces mechanical fixturing because parts are held by magnetic force, shortening fixture and alignment steps compared with mechanical clamping. Can the VG-1020 be used for precision milling and grinding? Yes, the VG-1020’s stable working surface and mass contribute to reduced vibration and improved surface finish, making it suitable for many milling and grinding applications in production and toolrooms. What maintenance is required to keep magnetic performance stable? Regular cleaning of the plate surface and removal of swarf and coolant residues will maintain magnetic performance; the VG-1020 benefits from simple, time-efficient upkeep rather than complex servicing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
250x600mm Precision Cross Table 500x400mm Base, 175 Kg Load, 0.02mm Accuracy, 1/2" T-Slot - Vertex
The combination of high positional accuracy, a robust load capacity and a compact footprint provides dependable results in inspection and light machining tasks. Take advantage of the stable construction and straightforward integration for consistent throughput. Order the unit directly via Metav Werkzeuge or consult our specialists for configuration advice. VCT-1024 Precision cross table — 0.02 mm accuracy, 175 kg load (Vertex) The VCT-1024 is a precision cross table designed for accurate XY positioning in inspection benches and machining set-ups, offering a compact measuring surface with industry-compatible T‑slots. High repeatability with 0.02 mm accuracy 250 x 600 mm measuring table for versatile fixturing Robust 175 kg static load capacity 500 x 400 mm rigid base for stable installation Precision that keeps production predictable This XY stage delivers consistent positional accuracy thanks to a specified tolerance of 0.02 mm, which stabilises measurement routines and repeatable machining tasks. The tight positional control reduces rework and inspection time by ensuring that adjustments and tool offsets remain constant between cycles. For non-specialists, 0.02 mm equates to a margin small enough for high-precision inspection, repeatable alignment and fine stepwise movements, making the stage suitable for quality control benches and light milling or drilling jigs where micron-level consistency is required. Built for heavy-duty positioning and stable set-ups The 250 x 600 mm measuring table pairs with a 500 x 400 mm base to create a compact, rigid platform that accommodates larger fixtures without sacrificing stability. With a rated static load of 175 kg, the stage supports robust clamping and multiple workpieces while maintaining accurate travel. The integrated T‑slot 1/2" enables standard fixturing hardware to be mounted directly, simplifying setup and reducing the need for custom adapters. This combination of table area, T‑slot compatibility and load rating shortens set-up times and enhances throughput in repetitive production environments. Integration and traceability to match industrial workflows Weighing 141 kg, the unit is substantial enough to resist vibration yet manageable for workshop installation by a small team. Identifiers such as SKU VCT-1024 and GTIN 4061905089695 support ordering, inventory control and traceability within procurement systems. As an XY stage from Vertex, the design aligns with common metrology and light machining toolchains and can be integrated into inspection rigs, coordinate measurement fixtures or milling sub‑assemblies. Minimal maintenance is required; routine checks of slide lubrication and screw pre‑tension keep travel smooth and preserve the stated positioning performance over time. For tailored configuration and delivery from Metav Werkzeuge’s Emmerich hub, contact Metav Werkzeuge for expert advice on integrating the Vertex VCT-1024 into existing workflows and for lead-time information. Technical data Article number: VCT-1024 GTIN: 4061905089695 Manufacturer: Vertex Facts Accuracy: 0.02 mm Table size: 250 x 600 mm Base footprint: 500 x 400 mm Weight: 141 kg Max load: 175 kg T‑slot: 1/2" Special features Precision cross table / XY stage Suitable for inspection and machining setups SKU: VCT-1024 FAQ What level of positional precision does this stage offer? The Vertex VCT-1024 specifies an accuracy of 0.02 mm, providing high positional repeatability suitable for inspection and fine machining tasks. What are the usable table dimensions for fixtures? The measuring surface measures 250 x 600 mm, offering ample room for multiple clamps or bulkier fixturing on the Vertex VCT-1024. How much load can the table carry? The cross table supports a static maximum load of 175 kg, enabling secure clamping of heavy jigs and multiple components. Which T‑slot size is provided for clamping? The unit is supplied with a 1/2" T‑slot configuration to accept standard industrial clamping elements. Are identification codes available for procurement and inventory? Yes; the stage is listed under SKU VCT-1024 and GTIN 4061905089695 for ordering and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
254mm Rotary Indexing Table 4° Per Spindle Turn, 10" Reading, 58mm Arbor, 310x160x285mm - Vertex
Combine 4° indexing per spindle turn with a 254 mm working plate and a robust 78.3 kg construction to achieve dependable, repeatable positioning for milling and drilling operations; order via Metav Werkzeuge or consult our specialists for application advice. Rotary Dividing Table "Super" (CS-8) by Vertex – 254 mm plate, 4° indexing Rotary Dividing Table "Super" (CS-8) designed for precise indexing and flexible workholding in milling and drilling applications 254 mm working plate diameter 4° indexing per spindle revolution 58 mm spindle bore for large mandrels Includes 3-jaw chuck and 250 mm faceplate Accurate indexing that reduces setup time The 4° indexing mechanism provides a clear, repeatable subdivision for common division tasks, allowing efficient production of regularly spaced features without complex gear changes. A fine vernier reading of 10" ensures adjustments can be set with precision; together these values translate into reliable angular positioning for jigs and fixtures. The compact footprint and clearly marked indexing make this solution suitable where controlled rotation and quick changeovers improve throughput. The design focuses on measurable performance, reducing setup iterations and supporting consistent results in small-batch and prototyping environments. Stable platform for secure machining Built with a substantial mass of 78.3 kg, the table gives a solid foundation that dampens vibration and maintains concentricity during cutting. The 254 mm working plate offers a practical balance between workpiece capacity and machine compatibility, while robust construction reduces deflection under load. This stability benefits surface finish and tool life by keeping the workpiece rigidly located during indexing and peripheral machining. The result is predictable machining behaviour, particularly where repeatability and dimensional control are paramount. Ready-to-use set with versatile workholding Delivered as a set, the unit includes a 3-jaw chuck, a 250 mm faceplate and multiple cover plates for common division counts, enabling immediate mounting and a wide range of clamping options. The 58 mm spindle bore accepts larger mandrels, increasing adaptability for through-work and external clamping setups. Providing these accessories as a set reduces the need to source additional fixturing, shortening the time between purchase and production start-up and helping to consolidate essential tooling for the workshop. Practical integration into everyday workshop tasks The compact dimensions (310 x 160 x 285 mm) and clear indexing make the dividing table suitable for use on milling machines and drill presses where controlled rotation is required. Tasks such as milling slots, drilling bolt patterns or producing splines benefit from the combination of consistent indexing and robust mounting. Supplied by Vertex, the model CS-8 is intended as a practical, long-term addition to a toolroom or production cell where reproducibility and straightforward operation are valued. Discuss technical suitability and fast delivery with Metav Werkzeuge in Emmerich—our specialists will advise on integration and accessory needs Technical data SKU: CS-8 GTIN: 4061905093388 Manufacturer: Vertex Machinery Works Co., Ltd. Set contents: 1x 3-jaw chuck, 1x 10"/250 mm faceplate, cover plates 2, 3, 4, 6, 8, 12 Facts Table diameter: 254 mm Overall dimensions: 310 x 160 x 285 mm (L x W x H) Weight: 78.3 kg Spindle bore: 58 mm Index per spindle turn: 4° Reading resolution: 10" Special features Set delivery with workholding accessories Model designation: Super EClass: 36600610 FAQ How precise is the indexing on this dividing table? The dividing table offers 4° indexing per spindle revolution with a vernier reading of 10", providing fine angular control suitable for most workshop indexing tasks. Which accessories are supplied with the unit? Delivery includes a 3-jaw chuck, a 250 mm faceplate and cover plates for common divisions, supplied as a set to allow immediate use. What spindle bore size does the table accept? The table features a 58 mm spindle bore, permitting larger mandrels for through-work and expanded clamping options. Is the table suitable for mounting on a standard milling machine? Yes, the compact footprint and robust construction make this indexing table suitable for mounting on typical milling machines and drill heads for slotting and pattern work. Who manufactures the unit and what is the model code? The unit is manufactured by Vertex and is supplied under the model code CS-8, representing the Super series. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
255mm Swivel Rotary Tilting Clamping Table With Rotating Base, T-Slot 16 mm - Vertex
Take advantage of a heavy, stable platform and a swivelling, rotating base to speed set-ups and reduce vibration for precise clamping. The combination of a 360 x 390 mm working table and a 16 mm T-slot delivers flexible fixture compatibility, while reliable supply and advice are available from Metav Werkzeuge for fast integration into the workflow. VP-380S clamping table with rotating base, 16 mm T-slot (Vertex) A VP-380S clamping table engineered for versatile fixturing and accurate part positioning across machine shops and inspection benches Robust 86 kg construction 360 x 390 mm working table 16 mm T-slot for flexible clamping Swivelling, rotating base for alignment Stable platform for precise fixturing A heavy clamping platform improves machining and measurement reliability by reducing vibration and movement during work. The 86 kg mass of the unit provides a solid base that minimises micro-movements when cutting forces or inspection probes are applied. Combined with a 360 x 390 mm top, the device accommodates medium-sized workpieces while keeping the setup compact. The result is enhanced stability and consistent repeatability, which directly supports tighter tolerances and fewer reworks. Faster alignment and greater positioning flexibility The rotating base with swivelling capability enables rapid orientation of the workpiece without repeated reclamping. This feature shortens set-up times and allows angular adjustments for multi-axis operations or inspection routines. When the base is rotated, fixturing stays secure thanks to the robust construction, so alignment can be changed swiftly while preserving the clamped position. This workflow efficiency contributes to higher throughput on bench-mounted processes. Compatible clamping for common workshop fixtures The integrated 16 mm T-slot accepts a broad range of standard clamps and T-nuts, simplifying the selection of fixturing hardware and supporting modular tooling systems. Clear compatibility with common fixture components reduces the need for bespoke adapters and accelerates changeovers between jobs. The table geometry delivers practical mounting options without sacrificing the secure hold required for machining and metrology tasks. Built for integration and dependable supply Designed as a practical fixturing solution, the unit fits directly into existing benches and machine tables thanks to its compact footprint and proven mechanical layout. The product is supplied and supported via Metav Werkzeuge, whose logistics and quality assurance act as a dependable filter for the European market. With established delivery channels and technical advice available, the clamping table can be introduced to production or inspection workflows with confidence. For tailored advice on fitting the Vertex VP-380S to specific fixtures or machines, contact Metav Werkzeuge to discuss delivery options and technical details at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VP-380S GTIN: 4061905094569 ECLASS: 21020702 Facts Weight: 86 kg Table size: 360 x 390 mm Height: 255 mm T-slot width: 16 mm Special features Product type: Clamping table Rotating base, swivelling Brand: Vertex FAQ What are the exact table dimensions? The working surface measures 360 x 390 mm, providing a balanced area for medium-sized fixtures and components with the Vertex clamping table. Which T-slot size is provided for clamping hardware? The unit features a 16 mm T-slot, compatible with standard T-nuts and clamps commonly used in workshop fixturing. How heavy is the table and why does that matter? The assembly weighs 86 kg, a mass that increases stability and reduces vibration for improved machining and inspection consistency. Can the base be rotated to change workpiece orientation? Yes, the clamping table includes a rotating base with a swivelling function to allow rapid angular adjustments without repeated reclamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
255x380mm Tilting Clamping Table 45° Swivel, 18 Kg Load Capacity - Vertex
Benefit from the combination of FC25 cast iron durability, a 255 x 380 mm working surface and an ±45° swivel for flexible, repeatable clamping of workpieces up to 18 kg; order the VP-380 directly via Metav Werkzeuge or consult our specialists if specification advice is required. VP-380 Clamping Table – swivel ±45°, FC25 cast iron (Vertex) The VP-380 is a swivel clamping table designed for precision holding in machine and workshop set-ups, enabling angled operations and secure fixture of small to medium workpieces. Swivelling table ±45° Working surface 255 x 380 mm FC25 cast iron construction Rated load 18 kg Stable support for precise machining results The VP-380 merges a robust FC25 cast iron body with a compact, precision-oriented working surface to deliver repeatable results in demanding setups. The 255 x 380 mm table provides a practical footprint for jigs, small fixtures and component work, while the solid mass reduces chatter and improves precision during milling, drilling and measurement tasks. This combination supports consistent tolerances and fewer reworks in production and repair environments. Flexible angled positioning speeds up set‑ups A true benefit for workshop workflows is the integrated ±45° swivel, which permits secure clamping at common angular positions without repeated re-fixturing. The swivel function simplifies alignment for bevels or angled holes and shortens cycle times by cutting handling steps. With a rated capacity of 18 kg, the table reliably carries typical fixtures and small assemblies, enabling faster transitions between operations while maintaining workpiece stability. Robust design and workshop compatibility for long service life A substantial mass of 56 kg gives the unit inherent damping, stabilising the clamping during cutting and measuring operations. At a height of 181 mm the table integrates smoothly with common machine and bench set-ups, easing alignment with vises and fixtures. Manufactured by Vertex, the component reflects established machining standards; supplied via Metav, it sits behind a European quality filter that supports dependable availability and clear specification guidance for industrial and trade customers. Choose the VP-380 for stiff, swivelling clamping and contact Metav Werkzeuge for tailored specification advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VP-380 GTIN: 4061905093722 Manufacturer: Vertex Key figures Weight: 56 kg Height: 181 mm Table size: 255 x 380 mm Max. load: 18 kg Materials and features Material: FC25 Swivelling: 45° Working surface: 255 x 380 mm FAQ What maximum load can the clamping table carry? The VP-380 clamping table from Vertex is rated for a maximum load of 18 kg, suitable for a wide range of small fixtures and assemblies. Is the table suitable for angled machining operations? Yes, the integrated ±45° swivel allows secure clamping at common angles, reducing the need for additional re-fixturing during angled machining. What material is the body made from and why does it matter? The device is manufactured from FC25 cast iron; this material offers good mass and damping properties that reduce vibration and improve machining accuracy. How does the table size affect workshop use? The 255 x 380 mm working surface provides a compact yet practical area for jigs and small workpieces, balancing space efficiency with secure fixture mounting. Who manufactures the product and who supplies it in Europe? The clamping table is produced by Vertex and supplied in Europe through Metav Werkzeuge, which applies a quality filter and offers specification support. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
258mm Clamping Ring For Soft Jaw Inserts – Vertex
Taking advantage of its precise fit and measurable dimensions, the clamping ring ensures repeatable, secure holding of soft jaw attachments to speed up setup times and reduce rework. Order the item directly via Metav Werkzeuge or consult our advisors for compatibility checks. Clamping ring VFR-10 – Ø 258 mm, for soft jaws | Vertex Clamping ring VFR-10 for secure retention of soft jaw attachments in workshop chucks Clamping ring for soft jaw attachments Diameter 258 mm for medium chucks Fits 10 in clamping jaws Robust 3 kg construction Reliable precision for soft-jaw clamping The VFR-10 clamping ring delivers a stable interface between the chuck and soft jaws, providing consistent seating and repeatable clamping positions. With a clearly stated Ø 258 mm diameter, the part supports predictable set-up routines and reduces the need for iterative adjustments. This measurable dimension enables straightforward planning in jigging and fixture design, helping to maintain process repeatability and part quality in serial operations. Faster changeovers and reduced machining downtime Designed for seamless integration into existing chuck arrangements that accept 10 in jaws, the ring shortens changeover times by enabling secure attachment of soft jaw inserts without additional adapters. The combination of defined diameter and compatibility with standard jaw sizes supports lean workflows; fewer tools are required for a given task, and machine uptime improves. This efficiency argument is backed by the ring’s straightforward mechanical function rather than by subjective claims. Clear compatibility and safe handling explained Compatibility is communicated through standardised values: fits 10 in clamping jaws and weighs 3 kg, which allows planners to assess handling and storage requirements in advance. Soft jaws are removable jaw inserts used to protect delicate workpieces or to provide specific clamping contours; the clamping ring creates a stable mounting surface for these inserts, preventing unwanted movement during machining. The concise, factual presentation of these data supports informed purchasing and operational decisions. Practical durability and straightforward maintenance Engineered to function as a workshop-grade component, the ring’s robust construction reduces the frequency of replacement and supports consistent clamping behaviour over time. Routine inspection focuses on seating surfaces and the interface with soft jaws; maintenance is limited to keeping the contact areas clean and free from chips or coolant residues. This pragmatic approach ensures long-term reliability without complex servicing schedules. Contact Metav Werkzeuge today for compatibility verification and prompt delivery from Emmerich — ask about the Vertex VFR-10 clamping ring and its fit with existing 10 in jaws Technical data SKU: VFR-10 GTIN: 4061905087608 ECLASS: 20069202 Facts Diameter: 258 mm Weight: 3 kg Special features For soft jaw attachments Suitable for 10 in clamping jaws Brand: Vertex FAQ What is the primary use of this clamping ring? The clamping ring is intended to provide a stable mounting surface for soft jaw attachments, improving repeatability when securing delicate or shaped workpieces. Will the VFR-10 fit existing 10 in chucks? Yes, the VFR-10 is specified to fit 10 in clamping jaws and is designed for direct integration with compatible chuck systems. How heavy is the clamping ring and what does that mean for handling? The ring weighs 3 kg, which informs manual handling considerations and storage; lighter lifting aids or two-person handling may be used depending on workshop practice. Does the clamping ring require special maintenance? Maintenance is limited to routine cleaning of the seating surfaces and inspection for wear; no specialised servicing is required for normal workshop use. Can the ring be used with custom soft jaws or only standard types? The ring is designed to accept soft jaw attachments; compatibility with custom jaws depends on the jaw design but the Ø 258 mm datum and the 10 in jaw compatibility provide the key interfaces for assessment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25mm 5C Collet, Precision 0.02mm Runout, 87mm Length - Vertex
High-repeatability clamping with a 25 mm nominal diameter and 0.02 mm runout tolerance ensures consistent part quality and reduced rework; compact 87 mm length provides access in constrained set-ups. Order the 5C-25 collet directly via Metav Werkzeuge or ask our consultants if needed. 5C-25 5C Collet – 25 mm diameter, 87 mm length (Vertex) The 5C-25 collet is a precision 5C clamping collet designed for secure toolholding in workshop and industrial machining applications *5C standard for broad compatibility *25 mm nominal diameter for robust clamping *Runout tolerance 0.02 mm for consistent concentricity *87 mm length for deep-reach operations Improved process quality through measurable precision A consistent clamp interface reduces scrap and rework; the precision of the construction delivers measurable gains on repeat jobs. The specified 0.02 mm runout indicates the collet’s ability to keep cutters and workpieces close to true centre, which benefits surface finish and tool life. Explained simply, lower runout means less vibration and fewer rejects, so production runs achieve higher first-pass yield and predictable tolerances. Compact dimensions for flexible integration With a 25 mm nominal gripping diameter and an 87 mm overall length, this collet combines compactness with effective clamping force. The 5C standard format ensures compatibility with existing 5C chucks and adaptors commonly used in lathes and milling heads, reducing retrofit effort. At approximately 0.21 kg, the component is light enough for straightforward handling while still offering the mass required for stable clamping, helping to cut changeover times between operations. Robust handling for everyday workshop demands Manufactured to Vertex specifications, the collet is aimed at routine shopfloor tasks where repeatability and operational confidence matter. The simple geometry supports quick inspection and maintenance, keeping downtime to a minimum. Supplied through Metav Werkzeuge, customers benefit from a European quality filter and reliable logistics, which supports uninterrupted production planning and a steady parts supply. Contact Metav Werkzeuge for tailored technical advice on the Vertex 5C-25 collet and to arrange supply from Emmerich with expert consultancy available Technical Data Article number: 5C-25 GTIN: 4061905090677 Manufacturer: Vertex Eclass: 21041712 Facts Diameter: 25 mm Length: 87 mm Runout accuracy: 0.02 mm Weight: 0.21 kg Special features 5C standard collet SKU: 5C-25 High repeatability Compact form factor FAQ What runout can be expected from this collet? The runout is specified at 0.02 mm, which indicates the 5C-25 collet delivers close concentricity for precision machining. Is the collet compatible with standard 5C chucks? Yes. The 5C-25 follows the 5C standard and is compatible with tooling and chucks designed for the 5C format. Which diameter and length does the collet have? The collet has a nominal diameter of 25 mm and an overall length of 87 mm as supplied in the 5C-25 specification. Who supplies this product and where is it manufactured? The collet is a Vertex product distributed via Metav Werkzeuge; refer to the manufacturer details below for full address information. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25mm Adapter Sleeve Form 2 Hardened And Ground, L71mm D40mm - TECWERK
Take advantage of a hardened and ground clamping solution with a 25 mm bore and 71 mm clamping length for reliable, repeatable setups in production. Order directly via Metav Werkzeuge or consult our technical advisers for application support. Reduction sleeve Form 2 (Ø25 mm, L 71 mm) – TECWERK A reduction sleeve Form 2 designed to adapt a 25 mm drill rod to a 40 mm holder, hardened and ground for demanding clamping applications Hardened and ground finish Bore Ø 25 mm Outer Ø 40 mm Clamping length 71 mm Consistent concentricity for repeatable machining The precisely hardened and ground inner bore minimises variance in runout and delivers stable concentricity when reducing a larger holder to a smaller shank. For workshops and production lines this means fewer setup checks and a lower scrap rate, since the component that secures the tool is produced to tight geometric tolerances. The Form 2 design integrates with standard clamping systems and is intended for use with Form E 2 drill rod holders, ensuring a defined mechanical fit and predictable behaviour under load. Clear dimensional compatibility for reliable integration With an inner diameter of 25 mm, an outer diameter of 40 mm and a clamping length of 71 mm, the sleeve offers a balanced contact length that helps increase axial grip and reduce vibration during cutting or drilling operations. These measurable values make it straightforward to assess compatibility with existing toolholders and machine spindles. The specification-driven approach aids planning for tool assemblies and retrofit tasks, so the reduction sleeve can be selected and fitted without guesswork. Robust design that supports uptime and handling The component's finish and form provide a durable interface that resists wear across repeated tool changes, translating into longer service intervals and lower maintenance effort for the clamping system. The robust construction is particularly valuable where frequent changeovers occur or when handling heavy-duty drilling operations. For technical clarification or to confirm suitability for a specific application, the Metav Werkzeuge team is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. For reliable integration and expert advice on the TECWERK reduction sleeve, contact Metav Werkzeuge for tailored guidance and supply options Technical data Article number: 2000834227NW Label: Reduction sleeve Form 2, bore Ø25 mm, outer Ø40 mm, clamping L 71 mm, TECWERK Type: Reduction sleeve Form: 2 Manufacturer: TECWERK Packaging unit: 1 Core dimensions Bore diameter: 25 mm Outer diameter: 40 mm Clamping length: 71 mm Special features Hardened and ground For drill rod holder Form E 2 FAQ Which holder types is this sleeve compatible with? The reduction sleeve is intended for use with Form E 2 drill rod holders and fits an outer holder diameter of 40 mm while reducing to a 25 mm shank. Does the sleeve improve runout accuracy? Yes, the hardened and ground bore of the TECWERK reduction sleeve reduces runout compared with untreated adapters, improving concentricity in the clamped tool assembly. What are the critical dimensions to check before ordering? Confirm the 25 mm bore, 40 mm outer diameter and 71 mm clamping length against the toolholder and shank to ensure proper fit and sufficient contact length. Is the sleeve suitable for frequent tool changes? The robust finish and form are designed to withstand repeated changeovers, helping to maintain reliable clamping over many cycles. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Centre Point HVL Pro With Extended Running Tip, 60° Angle, MK3 Shank, 95.5mm Projection - RÖHM
High-precision concentric support and extended reach reduce set‑up time and rework: the combination of minimal runout and robust load capacity keeps long shafts stable during turning. Order this centre point directly via Metav Werkzeuge or ask our consultants for application advice. HVL Pro MK3 centre point — precision version with extended rotating tip by RÖHM A HVL Pro MK3 centre point designed for precision turning, offering an extended rotating tip to support long workpieces and maintain concentricity in demanding workshop environments Precision runout ≤ 0.005 mm Extended tip for deeper reach Rated for speeds up to 5,000 min⁻¹ MK3 Morse taper shank Maintain concentricity with measurable precision The rotating centre is engineered for tasks where concentricity is critical: a maximum runout of 0.005 mm ensures that parts remain true to form during rotation, which reduces scrap and downstream grinding. The 60° tip angle is compatible with standard centre bores and, combined with the precision construction, provides repeatable support for turning operations. This level of accuracy is particularly beneficial when producing shafts and components that require tight tolerances and consistent surface quality. Extended reach and stable support for long components With an overall projection of 95.5 mm and a tip length of 47 mm, the extended running tip gives additional reach for longer workpieces while keeping the supported section close to the lathe bearings. The centre point is rated for a maximum workpiece weight of 400 kg, so heavy assemblies can be turned with confidence. The solid housing and mass distribution, shown by the 58.5 mm housing diameter and a unit weight of 1.3 kg, contribute to reduced vibration and enhanced surface finish during medium to heavy machining cycles. Compatible taper and speeds for modern lathes Fitted with an MK3 (Morse taper 3) shank and a precise shank diameter of 23.825 mm, the centre point integrates with common lathe tailstocks and adaptors. It is designed for rotational speeds up to 5,000 min⁻¹, matching many conventional and CNC turning regimes. The rotating tip minimises friction and heat at the contact point, promoting longer service intervals and consistent performance under continuous operation. Practical workshop advantages and reliability Constructed as a pro precision version with an extended running tip, the centre point is a straightforward choice for workshops seeking reliable centring without complicated maintenance. The reduced runout and robust build support higher first-pass yields and stable cycle times, while the familiar MK3 interface simplifies tool changes and inventory management. For operations handling medium to large shafts, the combination of reach, load capacity and rotational performance delivers measurable process stability. For precision turning tasks that demand minimal runout and increased reach, consult Metav Werkzeuge to discuss integrating the RÖHM HVL Pro MK3 centre point into current workflows or to request purchasing guidance from our specialists Technical data Article number: 4000832082NW Product: Centre point Brand: RÖHM Type: Pro precision version with extended rotating tip Facts Diameter: 25 mm Projection (reach): 95.5 mm Tip length: 47 mm Runout (max): 0.005 mm Workpiece weight (max): 400 kg Maximum speed: 5,000 min⁻¹ Housing diameter: 58.5 mm Weight: 1.3 kg Tip angle: 60° Shank diameter: 23.825 mm Shank execution: MK3 Special features Pro precision execution Extended running tip for deeper support Packaging unit: 1 SKU / Identifier: 4000832082NW FAQ What level of concentric accuracy does this centre point provide? The RÖHM HVL Pro MK3 centre point offers a maximum runout of 0.005 mm, providing the precision necessary for tight-tolerance turning and repeatable part geometry (SKU 4000832082NW). Can this centre point support heavy or long workpieces? Yes, the rotating centre is rated for a maximum workpiece weight of 400 kg and, with an overall projection of 95.5 mm, is well suited to support longer shafts while maintaining stability. Which taper does the shank use and will it fit standard tailstocks? The unit uses an MK3 (Morse taper 3) shank with a diameter of 23.825 mm, making it compatible with many conventional lathe tailstocks and adaptors. What rotational speed is permitted for continuous use? The centre point is specified for speeds up to 5,000 min⁻¹, aligning with typical turning parameters for both manual and CNC lathes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Centre Point MK3 60° 0.005mm Runout, 3500min⁻¹, 500kg Workpiece - TECWERK
Take advantage of the combination of high radial precision, robust MK3 taper compatibility and reliable high-speed performance for uninterrupted turning operations. Order the TECWERK live centre directly via Metav Werkzeuge or consult our specialists for application-specific advice. TECWERK Live Centre MK3 — rotating lathe centre with 60° tip and 500 kg capacity A TECWERK Live Centre MK3 engineered to support heavy turning applications on conventional and CNC lathes, delivering consistent concentricity and secure axial support for demanding workshop tasks. 60° precision tip for reliable centre support Max 500 kg workpiece capacity at secure support Max 3,500 rpm with ≤0.005 mm runout accuracy Consistent concentricity for improved surface finish A centre with a maximum radial deviation of ≤0.005 mm significantly reduces wobble during turning operations, which directly improves dimensional accuracy and surface quality. The fine tolerance of the rotating point minimises rework and scrap rates, making the component flow more predictable. Paired with its defined 60° tip, the centre provides a stable contact geometry for general turning and facing tasks, translating technical accuracy into measurable production gains. Robust MK3 taper and compact overhang for secure mounting The device features a MK3 (Morse taper 3) spindle taper and a precise shaft diameter of 23.825 mm, ensuring secure seating in standard lathe tailstocks or spindle sockets. The 79.5 mm overhang balances accessibility and rigidity, allowing access to deeper bores while maintaining stable support. The compact housing and a total weight of 1.3 kg offer a practical balance between handling and mass damping, which supports steady cutting conditions in everyday workshop use. High-speed capability without sacrificing precision Rated for up to 3,500 rpm, the rotating centre maintains its specified runout across typical machining speeds for medium to heavy turning. The combination of a stiff housing (60 mm diameter) and a 31 mm long tip provides reliable dynamic behaviour that reduces vibration and thermal deviation during longer runs. This makes the component suitable for operations where both rotational speed and concentricity are critical to part quality. Designed for straightforward integration and dependable service life The rotating design reduces friction compared with a static centre, lowering local heat generation and wear at the contact point. The centre's geometry and build quality facilitate rapid set-up and consistent repeatability between jobs, which supports shorter idle times and higher machine utilisation. Clear compatibility with standard Morse taper tooling and the defined dimensional data facilitate straightforward tool planning and inventory management in the workshop. Contact Metav Werkzeuge for tailored application advice and to secure this TECWERK live centre with proven ≤0.005 mm runout for demanding turning requirements — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832041NW Product: Live centre MK3 Manufacturer: TECWERK Packaging unit: 1 Core data Overhang: 79.5 mm Weight: 1.3 kg Diameter (point): 25 mm Shaft diameter: 23.825 mm Tip length: 31 mm Housing diameter: 60 mm Tip angle: 60° Max workpiece weight: 500 kg Max speed: 3,500 rpm Max runout deviation: 0.005 mm Design and special features MK3 Morse taper Live (rotating) centre design 60° precision tip geometry Compact 79.5 mm overhang for deep support 31 mm tip length for stable contact 60 mm housing diameter for rigidity FAQ What spindle taper does this centre use and how does it fit standard machines? The centre uses a MK3 (Morse taper 3) shaft that fits standard MK3 tailstocks and spindle sockets, allowing secure seating in conventional lathes and many retrofit adapters. What level of concentricity can be expected during operation? The rotating centre is specified with a maximum radial runout deviation of 0.005 mm, which supports high-precision turning and consistent repeatability. Which maximum workpiece weight is supported by the centre? The design allows reliable support of workpieces up to 500 kg when used within appropriate machine and clamping limits. Is the centre suitable for high-speed turning operations? Yes, the centre is rated to 3,500 rpm, combining rotational capability with the specified runout tolerance for stable high-speed performance. How does the 60° tip geometry affect machining? A 60° tip provides a balanced contact angle for general turning tasks, delivering dependable axial and radial support while simplifying alignment for standard centre lines. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm ER Collet For ER 25 Collet Chuck, 5 µm Runout Accuracy, L 46mm - TECWERK
Inconsistent product information detected for this collet: the product label indicates an ER 40 variant while the specified collet type is ER 25, and the listed clamping diameter of 25 mm with dimensions L 46 mm and D 41 mm does not clearly reconcile these entries. Because ER series sizes determine chuck compatibility and clamping ranges, these conflicting details prevent a reliable identification of the correct part and could lead to an incorrect order or unsafe assembly. Please have the item specification verified and provide the confirmed ER series, nominal clamping diameter and full dimensions so the entry can be corrected. For verification or further technical clarification, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930—our team will assist in resolving the discrepancy.
25mm Face Clamping Chuck DIN 69871 AD/B With 6mm Weldon Shank, Central Coolant Channels - TECWERK
Engineered for rigid fixation with a steep SK40 taper and a precise H4 bore tolerance, this face clamping chuck delivers consistent, vibration‑resistant toolholding and improved coolant control. Order the TECWERK unit via Metav Werkzeuge or consult the specialists for application‑specific guidance. TECWERK face clamping chuck DIN 69871 AD/B — SK40, 6 mm Weldon The TECWERK face clamping chuck designed for SK40 spindles combines a steep taper to DIN 69871 Form AD/B with central and lateral coolant feeds for precision milling applications. DIN 69871 Form AD/B taper Central coolant supply, resealable channels Lateral coolant channels for cylindrical shanks Bore tolerance H4 for accurate seating Rigid toolholding that meets industry standards The holder is built to DIN 69871 Form AD/B and fitted to an SK40 shank, delivering a steep taper that prioritises axial rigidity and repeatability. The internal bore is finished to H4 tolerance, ensuring a concentric, low‑runout fit with cutters and shanks. With a clamping diameter of 6 mm and flange dimensions A = 50 mm and D = 25 mm, the design reduces micro‑movement during heavy cuts, which supports higher surface quality and predictable cycle times. Integrated coolant management to protect cutters and workpieces A central coolant supply and resealable coolant channels at the flange keep cutting edges cooled directly through the tool, while additional lateral coolant channels accommodate tools with cylindrical shanks and a lateral drive flat to DIN 1835‑B. This configuration improves chip evacuation and temperature control at the cutting zone, which lowers thermal expansion and extends insert and tool life. The combination of internal feed and lateral delivery supports demanding operations where coolant penetration and stable cutting conditions are essential. Workshop efficiency and compatibility for production use Equipped with a Weldon drive for the 6 mm clamping diameter and matching the SK40 interface, the chuck offers straightforward integration with existing milling setups. The compact flange and standardised interface simplify tool changes and reduce spindle downtime, making it suitable for both precision jobbing and serial production. As a standardised toolholder, it supports consistent setup routines and predictable maintenance intervals, helping to streamline the supply chain and keep machining processes steady. Request a technical consultation or specification sheet from Metav Werkzeuge in Emmerich to confirm suitability and delivery options for the TECWERK face clamping chuck (SKU 2000833769NW) Technical data SKU: 2000833769NW Standard: DIN 69871 Form AD/B Shank: SK40 Clamping type: face clamping chuck Dimensional data A (projection): 50 mm D (flange Ø): 25 mm Clamping Ø d: 6 mm Bore tolerance: H4 Features Central coolant supply Resealable coolant channels at flange Lateral coolant channels for cylindrical shanks Lateral drive flat compatible with DIN 1835‑B Weldon drive for 6 mm clamping FAQ What taper and spindle interface does this holder use? The TECWERK face clamping chuck uses a steep taper to DIN 69871 Form AD/B and fits an SK40 spindle interface (SKU 2000833769NW). How is coolant delivered to the cutting edge? Coolant is routed via a central coolant supply with resealable channels at the flange and lateral coolant channels that service tools with a cylindrical shank and lateral drive flat per DIN 1835‑B. What ensures precise seating of the tool in the holder? A bore finished to H4 tolerance provides a concentric fit, combined with the DIN 69871 taper geometry to reduce runout and improve machining accuracy. Which tool shank types are compatible with the lateral channels? Tools with cylindrical shanks and a lateral drive flat (Weldon) to DIN 1835‑B are compatible with the lateral coolant channels and drive arrangement of this chuck. What are the key flange and clamping dimensions to consider when planning setups? Relevant dimensions are A = 50 mm, flange Ø D = 25 mm, and clamping diameter 6 mm, which inform tool projection and clearance requirements. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
25mm Face Clamping Chuck Weldon 6mm Bore, HSK-A63 DIN 69893 Form A - TECWERK
Take advantage of robust HSK‑A63 compatibility and precise 6 mm clamping for reliable tool retention; order directly via Metav Werkzeuge or contact our consultants for application advice. Face-clamping chuck DIN 69893 Form A (Weldon) – HSK‑A63, 6 mm clamping diameter — TECWERK A face-clamping chuck DIN 69893 Form A designed for HSK‑A63 toolholders to secure cylindrical‑shank tools with a Weldon drive flat, ensuring repeatable, vibration‑resistant clamping in machining centres Weldon flat for positive axial drive HSK‑A63 hollow shank taper DIN 69893 Form A 6 mm clamping diameter with H4 bore tolerance For cylindrical shanks to DIN 1835‑B Secure compatibility for HSK‑A63 systems The face‑clamping chuck is engineered around the HSK‑A63 interface and DIN 69893 Form A, delivering a precise mechanical fit that reduces run‑out and improves tool life. The combination of a hollow shank taper and a Weldon style lateral drive flat ensures axial and rotational positive drive for tools with cylindrical shanks to DIN 1835‑B. This compatibility means fewer setup checks, predictable repeatability and a measurable reduction in rework for production runs. Design features that reduce setup time and vibration Built for stability, the chuck’s 6 mm clamping diameter and H4 bore tolerance provide tight concentricity and consistent gripping force across batches. The Weldon flat offers an anti‑rotation interface that converts torque into controlled axial contact, diminishing micro‑slip under load. The result is lower tool wear, quieter operation and less need for frequent torque re‑checks, which together improve throughput and lower total operating cost. Where this clamp delivers practical benefits Ideal for machining tasks that use cylindrical shank cutting tools, the chuck supports secure holding during milling, drilling and finishing operations where positional accuracy matters. The hollow shank taper design allows rapid tool change while maintaining repeatability, making it well suited to CNC machining centres and automated tool magazines. For workshops seeking a durable, straightforward clamping solution, this clamp balances simplicity with industrial‑grade precision. For assured compatibility and application guidance for the TECWERK HSK‑A63 face‑clamping chuck, contact Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss specifications and integration into existing setups Technical Data Article number: 2000832385NW Standard: DIN 69893 Form A Mount: HSK‑A63 Manufacturer: TECWERK Facts Clamping diameter: 6 mm Body diameter (D): 25 mm Length (A): 65 mm Bore tolerance: H4 Special features Weldon lateral drive flat for positive torque transmission Hollow shank taper according to DIN 69893 Form A For tools with cylindrical shank and lateral drive flat to DIN 1835‑B SKU: 2000832385NW FAQ What interfaces does this chuck support? The TECWERK face‑clamping chuck is built for HSK‑A63 toolholders (DIN 69893 Form A), providing a precise mechanical fit. Can the chuck hold tools with a Weldon flat? Yes, the clamp is specified with a Weldon lateral drive flat to engage tools complying with DIN 1835‑B. What is the clamping diameter and tolerance? The clamping diameter is 6 mm with a H4 bore tolerance, ensuring close concentricity. Is this chuck suitable for automated tool change systems? The hollow shank taper and consistent clamping interface make the chuck suitable for CNC tool magazines and automated change‑over in production settings. How can the SKU be referenced for ordering or compatibility checks? Refer to SKU 2000832385NW when enquiring about the TECWERK face‑clamping chuck to ensure correct identification. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
25mm Face Clamping Chuck Weldon Shaft 6mm Bore, HSK-A63 DIN 69893 Form A - TECWERK
Take advantage of the combination of HSK‑A63 precision, a Weldon flat for positive lateral drive and a 6 mm clamping diameter to achieve repeatable toolholding and reduced setup time. Order the face clamping holder directly via Metav Werkzeuge or ask the consultants if application advice is required. Face clamping holder HSK‑A63, Weldon flat, 6 mm clamping – TECWERK Face clamping holder HSK‑A63, Weldon flat, ideal for clamping DIN 1835‑B cylindrical shanks in milling and drilling toolholders HSK‑A63 interface to DIN 69893 Form A Weldon flat for secure lateral drive Clamping Ø 6 mm for cylindrical shanks Bore tolerance H4 for precision fit Precise, repeatable clamping for productive setups The HSK‑A63 taper in accordance with DIN 69893 Form A provides a defined seating that improves repeatability between tool changes. Combined with the specified bore tolerance H4, the holder ensures a tight, consistent fit of the clamping element, which reduces runout and the need for frequent readjustment. This leads to shorter setup times and more predictable machining results when processing batches or switching tools frequently. Secure drive and broad compatibility with cylindrical shanks Equipped with a Weldon flat, the holder provides positive lateral engagement for tools with a driving face as per DIN 1835‑B, avoiding slippage under torque. The clamping Ø 6 mm is suited to common tool shank sizes that rely on a Weldon-style side drive, while the HSK‑A63 interface guarantees compatibility with machines designed for DIN 69893 Form A toolholders. The specified dimensions (A = 100 mm; D = 25 mm) support integration into standard tool chains without modification. Designed for workshop efficiency and confident procurement A compact length and standardised interface mean easier stock management and faster replacement when tools need swapping. The combination of a standardised HSK connection and a Weldon lateral drive delivers operational security for a wide range of milling and drilling operations. Where tolerance-sensitive applications are required, the bore tolerance H4 and the secure drive design contribute directly to consistent part quality and reduced scrap rates. Contact Metav Werkzeuge today for tailored advice on integrating TECWERK HSK‑A63 holders into the toolroom and to check immediate availability from our Emmerich warehouse Technical Data Article number: 2000832368NW Label: Flächenspannfutter DIN 69893A Weldon Spann-D.6mm HSK-A63 A.-L.100mm TECWERK Manufacturer: TECWERK Interface: HSK‑A Facts Norm: DIN 69893 Form A Length (A): 100 mm Outer diameter (D): 25 mm Clamping diameter (d): 6 mm Special features Weldon flat for lateral drive according to DIN 1835‑B Bore tolerance H4 Suitable for clamping tools with cylindrical shank and lateral driving face Conforms to DIN 69893 FAQ What spindle interface does this holder use? The holder uses an HSK‑A63 interface in line with DIN 69893 Form A, ensuring a defined seating for quick and precise tool changes. Can tools with a Weldon shank be clamped securely? Yes, the Weldon flat incorporated in the holder provides positive lateral engagement for tools with a driving face as specified in DIN 1835‑B, enabling secure torque transmission. What does the bore tolerance H4 mean for performance? A bore tolerance H4 indicates a tight, repeatable fit between the clamping element and holder bore, contributing to reduced runout and greater machining accuracy. Which shank diameter is supported by this holder? The face clamping holder is specified with a clamping Ø 6 mm, intended for cylindrical shanks that use a Weldon-style lateral drive. Are the dimensions compatible with standard tool assemblies? Yes, the listed dimensions (A = 100 mm, D = 25 mm) are aligned with common toolholder configurations and facilitate straightforward integration. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
25mm Face Clamping Chuck Weldon Shank DIN 69871 Form AD, 6mm Shank Bore - TECWERK
Benefit from precise clamping via the SK40 interface, the 6 mm clamping diameter and the H4 bore tolerance for consistently accurate tool positioning; order the face clamping chuck directly via Metav Werkzeuge or consult our advisers for tailored support. TECWERK face clamping chuck — SK40, Weldon, 6 mm clamping The TECWERK face clamping chuck is a DIN 69871 Form AD toolholder for secure mounting of cylindrical-shank cutters with lateral drive flat. Weldon shank for positive drive and axial security DIN 69871 Form AD steep taper for machine spindle compatibility 6 mm clamping diameter, H4 bore tolerance for concentricity SK40 taper with 50 mm projection length for deeper tool reach Precision alignment for repeatable machining The DIN 69871 Form AD interface combined with the SK40 taper ensures a stable machine-to-tool connection that reduces runout and improves reproducibility. With a 6 mm clamping diameter and H4 bore tolerance, the holder delivers consistent concentricity across tool changes, so the machining process requires fewer adjustments and yields more predictable part quality. This precision is especially beneficial where tight tolerances are demanded and where repeatable setup saves time in series production. Fast, secure tool retention for reduced downtime Equipped with a Weldon shank (drive flat) and designed to accept cylindrical shank cutters to DIN 1835‑B, the chuck provides positive lateral drive and reliable torque transmission. The 50 mm projection (A: 50 mm) gives extra reach while keeping the tool firmly seated, which reduces the risk of slippage under cutting loads. Faster tool exchanges and secure retention translate into improved throughput and less unplanned downtime during machining cycles. Built for standardised workflows and dependable supply The holder is manufactured to familiar industry norms, supporting straightforward integration into existing tool inventories and machine setups. The combination of standard conformity and measurable specifications—such as the H4 bore tolerance and the 25 mm body diameter—facilitates predictable performance across tool fleets. Supplied through Metav Werkzeuge from Emmerich, the product benefits from a quality filter and a dependable logistics backbone that helps maintain uninterrupted workshop operation. For enquiries about SK40 tooling, spindle compatibility or delivery from Metav Werkzeuge, contact our advisers for a personalised recommendation and prompt supply from Emmerich. Technical Data Article number: 2000833717NW Norm: DIN 69871 Form AD Product type: Face clamping chuck (Flächenspannfutter) Brand: TECWERK Facts Diameter (D): 25 mm Clamping diameter (d): 6 mm Projection/length (A): 50 mm Bore tolerance: H4 Spindle taper: SK40 Special features Weldon shank (lateral drive flat) For tools with cylindrical shank to DIN 1835‑B Steep taper per DIN 69871 Form AD Designed for repeatable, positive drive and secure retention FAQ What machines are compatible with this holder? The TECWERK face clamping chuck is designed for machines with an SK40 spindle taper and a DIN 69871 Form AD interface; compatibility depends on the machine spindle matching these standards. Which tool shank types can be used with this chuck? Tools with a cylindrical shank and a lateral drive flat to DIN 1835‑B are suitable for this Weldon-style face clamping chuck (SKU 2000833717NW). How does the H4 bore tolerance affect performance? The H4 bore tolerance ensures a tight, concentric fit around the clamping bore, reducing runout and improving repeatability during tool changes for consistent machining results. Is the 50 mm projection suitable for deep operations? The A: 50 mm projection provides extra reach while maintaining a secure connection; it is suitable for operations requiring modest additional tool length without compromising stability. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
25mm Face Clamping Chuck With 6mm Weldon Collet, Internal Coolant, DIN 69893 Form A - TECWERK
Benefit from a HSK‑A63 interface built to DIN 69893 Form A and integrated internal cooling for stable runs and effective chip evacuation; the Weldon 6 mm clamping diameter and lateral drive to DIN 1835 B ensure secure tool holding and repeatable positioning. Order this face clamping chuck directly via Metav Werkzeuge or consult their specialists for application advice. Face clamping chuck DIN 69893 Form A — HSK‑A63, 6 mm Weldon (TECWERK) A Face clamping chuck DIN 69893 Form A for HSK‑A spindles, designed to clamp cylindrical‑shank tools with internal coolant and side cooling channels for improved tool life and process stability HSK‑A63 interface (DIN 69893 Form A) — compact design Internal coolant for efficient chip removal Weldon clamp with 6 mm clamping diameter Side drive surface to DIN 1835 B specification Stable interface for consistent machining quality The hollow shank taper to DIN 69893 Form A provides a rigid and concentric connection to the spindle, which reduces runout and vibration. This stable interface supports consistent cutting conditions, helping to maintain dimensional accuracy and surface finish across production runs. The combination of standard conformity and solid mechanical design means the holder is suitable for machining environments that demand precision and repeatability. Integrated coolant and cooling channels extend tool life Equipped with internal coolant and side cooling channels, the holder actively directs cutting fluid to the cutting edge and the clamped area. This targeted coolant flow improves chip evacuation, lowers cutting temperatures and reduces thermal distortion during high‑load operations. The result is extended tool life and fewer unplanned tool changes, which supports higher uptime and lower operating costs over time. Secure clamping and standardised drive for reliable power transmission The Weldon clamping arrangement with a 6 mm clamping diameter provides secure axial and radial retention for cylindrical‑shank tools, while the lateral drive face conforms to DIN 1835 B, ensuring positive torque transmission. Bore tolerance H4 ensures a precise fit for tool shanks, reducing micro‑movement under load. These features together provide robust load transfer and make the holder appropriate for moderate to heavy milling and drilling tasks. Designed for workshop and production use with trusted supply This tool holder is engineered for integration into both busy shop floors and organised production lines: compact dimensions (A = 65 mm, D = 25 mm) allow close tool spacing, while standard interfaces simplify tool‑presetting and inventory management. Supplied by Metav Werkzeuge, the offering is backed by a broad portfolio and decades of distribution experience — a combination that supports dependable supply and a practical "quality filter" for the European market. The holder blends practical durability with industrial standards to meet modern machining demands. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this TECWERK HSK‑A63 holder into production. Technical Data Article number: 2000833835NW Manufacturer: TECWERK Product type: Face clamping chuck Interface: HSK‑A Data Length A: 65 mm Diameter D: 25 mm Clamping Ø d: 6 mm Bore tolerance: H4 Special features Hollow shank taper to DIN 69893 Form A Internal coolant Side cooling channels for cylindrical shank tools Lateral drive surface to DIN 1835 B FAQ What spindle interface does this holder use? The holder uses an HSK‑A63 spindle interface, compliant with DIN 69893 Form A, which is specified for rigid, low‑runout tool connections. Can this chuck supply coolant to the cutting zone? Yes, the TECWERK face clamping chuck is equipped with internal coolant and side cooling channels that deliver coolant directly to cylindrical‑shank tools to aid chip evacuation. What clamping diameter is supported by the Weldon feature? The Weldon clamping arrangement accommodates a 6 mm clamping diameter, ensuring secure retention for suitable tool shanks. Is the drive transmitted via a standardised lateral face? Drive is transmitted via a lateral drive surface conforming to DIN 1835 B, providing positive torque transfer for typical milling and drilling tasks. Which SKU identifies this product for ordering? This product is listed under SKU 2000833835NW and described as a face clamping chuck by TECWERK for HSK‑A63 spindles. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
25mm Flange According To DIN 6331, M12x1.75 Thread, 18mm Height - Vertex
Combining DIN 6331 standardisation with a secure M12 x 1.75 mm threaded connection and compact 25 mm diameter, this flange delivers reliable, interchangeable fit for clamping and tooling assemblies; order the flange directly via Metav Werkzeuge or ask our consultants if needed Flange CFN1219 (DIN 6331) — 25 mm, M12 x 1.75 — Vertex A Flange CFN1219 manufactured to DIN 6331 for standardised attachment in clamping and tooling assemblies DIN 6331 compliant flange M12 x 1.75 mm threaded connection 25 mm outer diameter, compact 18 mm height Lightweight: 0.03 kg for reduced spindle load Standardised fit for predictable assembly Manufactured to the DIN 6331 guideline, this flange provides a standardised interface that simplifies part selection and reduces assembly errors. The M12 x 1.75 mm threaded connection gives a common metric fit that is widely supported across tooling systems, allowing rapid replacement and straightforward interchangeability. With a clearly specified 25 mm diameter, the component matches typical clamping interfaces used in industrial fixtures and modular tooling, which supports smoother integration into existing production jigs and holders. Compact form factor that eases machine load The flange's compact dimensions — 18 mm height and a mass of only 0.03 kg — translate into tangible performance advantages. A lower rotating mass reduces inertial load on spindles and rotary couplings, which can improve balancing and minimise wear on bearings over time. The space-saving profile also helps when working in constrained tool pockets or on multi-component assemblies, enabling denser tool layouts without compromising mechanical stability. Clear specifications for confident procurement Thread and dimensional details are stated visibly to remove ambiguity: the metric thread follows the common pitch and diameter of M12 x 1.75 mm, while external sizing is standardised to facilitate compatibility checks. For non-specialist users, the thread designation means a 12 mm nominal diameter with a 1.75 mm thread pitch, a specification commonly used in fastening and clamping components. Such clarity supports procurement decisions and reduces the need for custom adaptors or additional machining. Reliable supply from a recognised manufacturer Produced by Vertex, the component benefits from established manufacturing routines and inspection procedures, ensuring consistent tolerances and repeatable fit. The flange is suitable for integration into a wide range of clamping systems and tooling fixtures where DIN conformity is required. Supplied via Metav Werkzeuge, customers gain from a European quality filter in Emmerich that pairs broad product availability with dependable logistics and long-standing industry expertise Contact Metav Werkzeuge in Emmerich to discuss compatibility and procurement for Vertex components such as the CFN1219 flange — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply and technical advice Technical data Article number: CFN1219 GTIN: 4061905094026 Manufacturer: Vertex Dimensions & weights Diameter: 25 mm Height: 18 mm Thread: M12 x 1.75 mm Weight: 0.03 kg Standards & classification Standard: DIN 6331 eClass: 37029205 Category: Vertex FAQ What thread specification does the flange use? The flange uses a metric M12 x 1.75 mm thread, specified for the Flange CFN1219 produced by Vertex (SKU CFN1219). Is the component compliant with industry standards? Yes, the part is manufactured to DIN 6331, which ensures standardised dimensions and interchangeability within compliant clamping systems. What are the key dimensions and weight? The flange has a 25 mm outer diameter, 18 mm height and a mass of 0.03 kg; these are the primary figures for the Flange CFN1219 from Vertex. Which applications are suitable for this flange? Typical uses include clamping and tooling assemblies, modular fixtures and adapters where a standard flange interface is required; the Flange CFN1219 is intended for integration into such systems. How can compatibility with existing toolholders be verified? Compatibility is confirmed by matching the DIN 6331 standard and the M12 x 1.75 mm thread and the 25 mm diameter to the specifications of the existing toolholder or fixture; the CFN1219 details support straightforward checks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25mm Flat Magnetic Holder With M4 Threaded Bush, 40N Holding Force, Up To 200°C - TECWERK
Combine compact dimensions with a reliable 40 N holding force and robust hard-ferrite construction for dependable, space-saving fixing in assemblies and jigs — order the magnet directly via Metav Werkzeuge or consult our advisors for application support. Flat magnetic holder D25×H15 mm with threaded bush — M4, 40 N, hard ferrite The flat magnetic holder D25×H15 mm is a compact magnetic mounting solution designed for secure, repeatable fixing in small fixtures, jigs and tooling applications. *Compact 25 mm diameter × 15 mm height *40 N holding force for small fixtures *Hard-ferrite magnet construction *Integrated M4 threaded bush for secure mounting Secure fixing in the smallest of spaces The compact 25 mm diameter and 15 mm height deliver a space-saving solution where conventional clamps cannot fit. Despite its small footprint, the component provides a holding force of 40 N, which is sufficient for light fixturing, positioning sensors and holding thin workpieces during assembly. The short profile reduces protrusion from the mounting surface and enables close packing of several magnetic holders for modular jigs. The robust hard-ferrite magnet material ensures stable magnetic performance and long service life in routine workshop use. Threaded fastening for precise alignment and repeatability An M4 threaded bush is integrated into the design so the holder can be mounted directly to fixtures, sensor brackets or tooling plates without additional adapters. The threaded interface supports repeatable alignment and straightforward replacement if a magnetic element needs changing. Installation is quick and reduces setup variability, which supports consistent process results and minimises downtime during tool changes or jig adjustments. Designed for workshop temperatures and short-term exposure The holder is specified with a recommended operating temperature of up to 100 °C and a maximum temperature tolerance of 200 °C, making it suitable for many production environments where elevated temperatures occur intermittently. This thermal resilience means the magnetic retention remains reliable during soldering near the fixture, heat-affected assembly steps or when used close to warm tooling, while prolonged exposure to the absolute maximum should be avoided to preserve magnetic strength. Practical uses and quick integration into existing tooling This flat magnetic component is ideal for applications such as temporary fixturing, locating small parts prior to fastening, or stabilising sensors and gauges during measurement. The low profile and threaded mounting make integration into custom fixtures straightforward, enabling flexible placement on jigs, machine guards or assembly benches. The compact magnet is a pragmatic choice where a discreet, reliable magnetic hold is required without heavy clamping equipment. For compact, reliable magnetic fixing contact Metav Werkzeuge for stock availability and tailored application advice — Metav Werkzeuge in Emmerich provides fast dispatch and expert consultancy via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832244NW Label: Magnet flat holder D25×H15 mm with threaded bush Material: hard ferrite Execution: with threaded bush Diameter: 25 mm Height: 15 mm Thread: M4 Holding force: 40 N Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C Packaging unit: 10 Facts Diameter: 25 mm Height: 15 mm Holding force: 40 N Thread: M4 Packaging unit: 10 Special features Hard-ferrite magnet material Integrated M4 threaded bush Compact flat profile for space-limited mounting Temperature tolerance up to 200 °C (short-term) Suitable for light fixturing and sensor mounting FAQ What holding capacity does the flat magnetic holder provide? The flat magnetic holder delivers a maximum holding force of 40 N, suitable for light fixturing and positioning tasks where a compact magnetic hold is required. How is the magnet mounted to a fixture? Mounting is via the integrated M4 threaded bush; the thread supports secure fastening and repeatable alignment when used in jigs or tooling plates. Which material is the magnet made from and what does that mean for longevity? The device uses hard-ferrite material, which offers stable magnetic performance and long service life for general workshop applications under normal conditions. What temperatures can the magnetic holder withstand? The holder has a recommended operating temperature up to 100 °C and a maximum short-term limit of 200 °C; prolonged exposure to the maximum should be avoided to preserve magnetic strength. Is the magnet suitable for heavy-duty clamping? This compact flat magnet is intended for light to medium fixturing tasks; applications requiring heavy clamping should use larger or higher-capacity magnetic systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Flat Magnetic Mount Without Threaded Bush 40N Holding Force, Max 200°C - TECWERK
Take advantage of the compact dimensions and reliable 40 N holding force for consistent part retention in production processes; the hard‑ferrite magnet offers temperature resilience up to 200 °C, while Metav Werkzeuge provides fast supply and specialist advice for seamless integration. TECWERK Magnetic flat holder D25 × H7 mm, 40 N holding force The TECWERK magnetic flat holder delivers a compact magnetic clamping solution for fixtures, jigs and small component handling in workshops and light industrial settings Compact D25 × H7 mm design Holding force 40 N Hard ferrite material Suitable up to 200 °C Accurate holding in a space‑saving format The hard ferrite construction provides a reliable magnetic field in a minimal footprint, making this component ideal where space is limited. With a diameter of 25 mm and a height of 7 mm, the unit achieves a holding force of 40 N, enabling secure retention of small parts during assembly or light machining. The compact dimensions reduce interference with neighbouring fixtures and help maintain clear access to workpieces, while the ferrite composition ensures wear‑resistant performance during repetitive use. Temperature resilience that supports process stability Designed for industrial environments, the magnet is specified with a recommended operating temperature of up to 100 °C and a maximum temperature of 200 °C, allowing use near heat‑generating processes. This thermal tolerance minimises loss of magnetic performance under warm conditions and supports consistent clamping force over cycles. For applications requiring heat exposure, the thermal data helps planners select suitable placement and cooling strategies to maintain operational integrity. Easy integration and dependable function without threaded bush Delivered without a threaded bush, the component simplifies direct bonding or press‑fit installation into fixtures and tooling plates, reducing design complexity for bespoke assemblies. The non‑threaded variant suits adhesive mounting or insertion into precision recesses and supports rapid retrofit into existing jigs. Backed by Metav's emphasis on traceable supply and quality control, the part contributes to predictable production outcomes and reduced rework rates. For ordering or technical consultation on the TECWERK magnetic flat holder, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for prompt delivery and expert advice. Technical Data Article number: 4000832234NW Product type: Magnetic flat holder Diameter: 25 mm Height: 7 mm Material: Hard ferrite Design: without threaded bush Holding force: 40 N Recommended operating temperature: up to 100 °C Maximum temperature: 200 °C Packaging unit: 10 Facts SKU: 4000832234NW Manufacturer: TECWERK Product category: Magnetic clamping element Special features Compact form factor for tight fixtures Suitable for adhesives or press fit installation Ferrite magnet for stable magnetic properties Engineered for repetitive holding tasks FAQ What is the holding capacity of this magnetic flat holder? The TECWERK magnetic flat holder provides a holding force of 40 N, suitable for securing small components in jigs and light assembly operations. Which materials is the magnet made from and how does that affect use? The unit is manufactured from hard ferrite, which offers good magnetic stability and wear resistance; ferrite is particularly appropriate where corrosion resistance and cost efficiency are required. Can the magnet be used near heat sources? Yes. The device has a recommended operating temperature up to 100 °C and can withstand a maximum of 200 °C, making it suitable for many warm industrial environments with appropriate placement. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
25mm Magnetic Rod Gripper Smooth, Holding Force 40N, AlNiCo 500 - TECWERK
Reliable compact holding that copes with high temperatures and confined spaces: a compact Ø 20 mm body combined with a 40 N maximum holding force and AlNiCo 500 magnet material supports secure short-term fixation in assembly and tooling. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Magnetic rod gripper D20×H25 mm — smooth, 40 N holding force (TECWERK) The Magnetic rod gripper D20×H25 mm smooth is a compact magnetic clamp designed for precise positioning and temporary holding of small ferrous components in production, assembly and inspection tasks. Smooth AlNiCo 500 surface Compact Ø 20 mm design Holding force 40 N Temperature resistance up to 450 °C Secure small-part holding with measurable performance The compact format provides a predictable holding characteristic: a cylindrical body with Ø 20 mm and a total height of 25 mm gives a stable contact area for small fixtures while keeping the footprint minimal. The specified 40 N holding force describes the peak pull capability under standard test conditions and translates into reliable short-term fixation for light assemblies, jigs or pick-and-place operations. This measured value supports process planning and reduces trial-and-error during fixture design. Material selection for thermal stability and magnetic consistency Built from AlNiCo 500, the magnet core offers stable magnetic properties at elevated temperatures and good demagnetisation resistance compared with standard ferrite magnets. AlNiCo 500 retains useful magnetic strength where heat is present, allowing operation up to 450 °C without rapid loss of performance. For production environments that include heat cycles or near-heat processes, this material choice reduces the need for frequent replacement and maintains holding performance over time. Precision fit and installation advantages Additional geometric data includes a dedicated dimension h: 5 mm with a h6 tolerance class; this defines a close-fitting datum for press or slip fits and ensures repeatable positioning in housings or tool plates. The h6 tolerance indicates a tight shaft fit commonly used in precision assemblies, reducing play and improving repeatability in repetitive operations. Clear dimensional control lowers setup time and contributes to consistent assembly quality. Gentle contact and versatile application range The smooth finish prevents unnecessary marking on mating parts and is therefore suitable for short-term contact with prepared surfaces. The combination of compact geometry and thermal resistance makes the component well suited to fixture points, temporary tacking in welding pre-assembly and sorting tasks where gentle magnetic support is required. The TECWERK magnetic rod gripper balances low profile design with practical holding capacity for everyday workshop and small-scale industrial tasks. For robust high-temperature magnetic holding choose the TECWERK magnetic rod gripper and contact Metav Werkzeuge for procurement and technical advice from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832255NW Product: Magnetic rod gripper Manufacturer: TECWERK Material: AlNiCo 500 Finish: smooth Packaging unit: 1 Facts Diameter: 20 mm Height: 25 mm Holding force: 40 N Operating temperature: up to 450 °C Dimension h: 5 mm; tolerance: h6 Special features Smooth execution AlNiCo 500 magnet material Compact design Packaging unit 1 FAQ What types of parts are suitable for magnetic holding? The magnetic rod gripper is designed primarily for ferrous components and supports temporary fixation of steel parts and similar magnetic materials. What is the maximum operating temperature? TECWERK specifies an operating temperature up to 450 °C for this magnetic rod gripper, reflecting the thermal resilience of the AlNiCo 500 material. What does the h6 tolerance mean for installation? A h6 tolerance indicates a close shaft fit; it ensures a snug installation with minimal play when the 5 mm h dimension is used as a locating feature. How strong is the grip in practical terms? The device provides a maximum holding force of 40 N, suitable for short-term holding and light fixture duties rather than heavy lifting. Will the finish mark delicate surfaces? The smooth execution reduces point marking and is intended for short-term contact where minimal surface impact is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Pneumatic Closure Clamp With Hook, Horizontal Base - Kukamet
Combining stainless steel construction with a compact horizontal‑base design and a secure hook, the result is a dependable clamp offering measurable holding performance (1,650 N) for repeatable fixturing; order the 361 directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Kukamet 361 Horizontal‑Base Toggle Clamp – stainless steel, with hook The 361 is a stainless‑steel horizontal‑base toggle clamp with hook, engineered for secure, repeatable retention in light to medium‑duty fixtures and assembly jigs. Stainless steel construction Holding force 1,650 N Horizontal base mounting Hook for easy engagement Repeatable clamping with quantifiable performance Built for predictable results, this toggle clamp provides a max holding force of 1,650 N and a max closing force of 1,400 N, values that allow planning of fixture layouts and safety margins. The measurable forces support process validation and help integrate the clamp into production documentation. Because the unit is made from stainless steel, corrosion resistance contributes to consistent clamping behaviour over time, reducing downtime for maintenance and replacement. The mechanical action is straightforward, so cycle times remain short and repeatability improves overall throughput. Robust material and simple integration into jigs The stainless steel body and the horizontal‑base footprint enable straightforward installation on workbenches and machine tables. The horizontal base provides a low profile, allowing the clamp to be mounted beneath or alongside fixtures without obstructing tooling paths. The built‑in hook offers rapid engagement with compatible fittings, making the component suitable for quick‑change pallets and modular clamping systems. Lightweight yet solid (0.085 kg), the device minimises added mass to moving subassemblies while maintaining structural rigidity where it matters. Practical benefits for workshop and light industrial use Design choices favour ease of use and durability: the hook simplifies engagement under varied workpiece geometries, and the thread length of 25 mm allows fine adjustment of the clamping point. In applications where cleanliness and corrosion resistance are required—such as food‑safe fixtures or humid environments—the stainless steel construction is an advantage. The compact format supports space‑constrained setups, and the clamp’s rated forces enable confident use in repeat assembly, inspection, or welding fixtures where predictable retention is essential. For reliable, corrosion‑resistant clamping choose the Kukamet 361 hook toggle clamp — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S361-2-T GTIN: 8680731509281 eClass: 21041718 Material: stainless steel Weight: 0.085 kg Category: Clamp (toggle clamp) Core specifications Max closing force: 1,400 N Max holding force: 1,650 N Thread length: 25 mm Weight: 0.085 kg Design & features Horizontal base mounting With hook Stainless steel construction Mounting style: horizontal base FAQ What holding capacity does this clamp provide? The Kukamet 361 toggle clamp delivers a holding force of 1,650 N and a closing force of 1,400 N, making it suitable for light to medium‑duty fixturing tasks. Is the clamp suitable for corrosive or humid environments? Yes, the stainless steel construction of the 361 increases resistance to corrosion and is appropriate for environments where moisture or mild chemicals are present. How is the clamp mounted? The unit is supplied for horizontal base mounting; the flat footprint is intended for attachment to benches, plates or fixture modules. Can the clamping position be adjusted? Adjustment is facilitated by the threaded engagement (thread length 25 mm), allowing the clamping point to be set for a range of workpiece geometries. Which category does this product belong to? This item is a toggle clamp (clamp category) intended for secure, repeatable workpiece retention in assembly and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Quick-Change Insert SES 20mm Square Gr.3 for DIN 374/376 M33 with Adjustable Torque-Limiting Safety Coupling - TECWERK
Take advantage of the adjustable safety coupling and robust torque transfer to reduce tap breakage and unplanned downtime; the compact design and clear compatibility with DIN 374/376 M33 make this insert a practical choice for production and toolroom environments — order through Metav Werkzeuge or contact the Metav experts for application advice. Quick-change insert SES 25 mm x 20 mm Size 3 by TECWERK — adjustable safety coupling for torque limiting Quick-change insert SES 25 mm x 20 mm Size 3 is a compact tap-holding insert designed for use with taps to DIN 374/376 M33 in production and workshop settings, combining secure clamping with an integrated safety coupling. Adjustable safety coupling for torque limiting Prevents tap breakage in interrupted cuts Torque transmitted via 20 mm square shank Compact 25 mm diameter for tight tool setups Minimise tap failure and keep production moving The adjustable safety coupling built into this quick-change insert is engineered to protect taps from overload by limiting transmitted torque. When a predetermined torque is exceeded, the coupling disengages so that a forced fracture of the tap is avoided; this mechanism is particularly useful when machining interrupted threads or when chip‑control is unpredictable. The result is fewer tool replacements and more consistent cycle times. The insert’s torque-limiting function is easy to set and, because the torque is transferred through the 20 mm square shank, the drive path remains direct and reliable under normal operating conditions. Fast changeover and secure clamping for busy toolrooms Designed for quick tool changes, the insert fits into standard holders where a 20 mm square drive is specified and presents a 25 mm diameter body that is compact enough for confined setups. The mechanical interface transmits power via the shank square, ensuring minimal backlash and predictable stiffness; for different holder drives, matching inserts are required, which allows flexible integration into varied tool racks and spindle adaptors. Clear, standard dimensions (L3, L4, L5, D, L1, D1) support planning and reduce errors during tooling changes, contributing to faster set-ups and reduced idle time. Built for production use and straightforward servicing This insert was conceived for professional environments where reliability and maintainability are paramount. The mechanical safety function reduces the risk of costly thread‑tap failures and repeat machining, which improves overall process yield. Routine inspection is limited to visual checks of the coupling and shank engagement; replacement is straightforward when wear occurs, so maintenance intervals can be planned rather than urgent. The compact design also supports nested or multi‑axis fixtures where space is at a premium. Application suitability and practical benefits Compatibility with DIN 374/376 M33 means the insert is suitable for thread‑cutting operations specified to that standard, while the torque‑limiting feature makes it a sensible choice for mixed batches and varied material conditions. The combination of precise torque control and standardised shank interface helps stabilise production outputs and reduces scrap rates. For workshops seeking to rationalise tooling without sacrificing safety, the insert offers a pragmatic balance between performance and operational resilience. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the TECWERK Quick-change insert SES 25 mm x 20 mm Size 3; Metav Werkzeuge provides expert guidance from Emmerich and reliable dispatch to the workbench — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832692NW Product: Quick-change insert SES Size: Size 3 Manufacturer: TECWERK Facts Diameter: 25 mm Square shank: 20 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm Packaging unit: 1 Special features Adjustable safety coupling for torque limiting Prevents tap breakage Torque transmission via shaft square Compatible with DIN 374/376 M33 Different shank sizes require specific inserts FAQ What types of taps are compatible with this insert? The Quick-change insert SES 25 mm x 20 mm Size 3 from TECWERK is compatible with taps made to DIN 374/376 M33; the torque is transmitted via the 20 mm square shank and the insert is intended for that thread specification. How does the adjustable safety coupling work? The adjustable safety coupling in the insert disengages when a preset torque threshold is exceeded, limiting transmitted torque to protect the tap from breaking and reducing the need for unplanned tool changes. Can the torque setting be changed on the shop floor? Yes, the torque limit is adjustable; the setting procedure for the TECWERK SES insert is mechanical and designed to be performed during routine set-up by trained personnel. Is the insert suitable for interrupted threading operations? Yes, the torque-limiting feature is specifically beneficial in interrupted threading or when cutting conditions are variable, as it helps to avoid sudden overloads that can cause tap fracture. Are matching inserts needed for different holders? Different drive or shank dimensions require corresponding inserts; the SES series uses the square shank for torque transmission, so inserts must match the holder’s shank size. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Reduction Bushing Form 2, Hardened and Ground, for Drill Rod Holder Form E2 - TECWERK
Combining a hardened and ground finish with a precise 25 mm bore and a 32 mm outer diameter, this reducing sleeve delivers stable clamping and repeatable concentricity for drill rod holders; order the part directly via Metav Werkzeuge or consult the technical team if clarification is required. Reducing sleeve Form 2 – 25 mm bore, 32 mm outer diameter (TECWERK) The Reducing sleeve Form 2 is a hardened, ground reduction bushing designed to adapt a 32 mm adapter diameter to a 25 mm drill rod bore for secure clamping in Form E 2 holders. Hardened and ground finish for long life Compatible with Form E 2 drill rod holders Inner bore 25 mm for standard drill rods Clamping length 56 mm for stable support Precision and durability for repeatable clamping The design ensures consistent concentricity by combining a precisely machined inner bore with a hardened and ground surface treatment. This construction reduces runout and wear during repeated tool changes, which improves process stability on production lines and in jobbing workshops. The robust finish extends service intervals, making the sleeve a reliable component where maintenance windows are limited and accuracy matters. Secure fit and proven compatibility with Form E 2 systems The sleeve adapts a 32 mm adapter diameter to a 25 mm internal bore, providing a direct mechanical transition for Form E 2 drill rod holders. The specified 56 mm clamping length supplies axial support to the rod, reducing deflection under cutting loads and helping to maintain tool life. Compatibility with standard drill rod dimensions makes the component suitable for retrofitting existing chucks or holders without complex rework. Operational benefits and easy replacement strategy Because the bushing is hardened and ground, the part resists deformation and maintains fit tolerances under continuous use, which reduces the likelihood of unexpected downtime. The simple geometry allows for quick replacement when wear occurs, keeping machine uptime high and spare part handling straightforward. In combination with a clear article number and traceability, workshop planning and inventory management become more efficient. For application advice or to order TECWERK reducing sleeves, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and delivery from our European stock Technical data Article number: 2000834217NW Product type: Reducing sleeve Form 2 Brand: TECWERK Packaging unit: 1 Numerical data Bore (d1): 25 mm Outer diameter (d): 32 mm Clamping length (L): 56 mm Form: 2 Special features Hardened and ground For drill rod holders Form E 2 FAQ What are the main dimensions of this reducing sleeve? The reducing sleeve has a 25 mm internal bore, 32 mm outer diameter and a clamping length of 56 mm; the article number is 2000834217NW. Is the component suited to heavy-duty or repetitive use? Yes, the TECWERK reducing sleeve is hardened and ground to withstand repeated clamping cycles and to maintain concentricity under continuous operation. Which holder systems is the sleeve compatible with? Compatibility is specified for Form E 2 drill rod holders; the sleeve provides a direct reduction to a 25 mm rod size for these systems. How is the sleeve identified for ordering and stock management? Order or specify the part by article number 2000834217NW and reference TECWERK reducing sleeve Form 2 for accurate replenishment. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Toggle Clamp Horizontal Base Stainless Steel With Hook, 1.65kN Holding, 1.4kN Thrust - Kukamet
Benefit from a corrosion-resistant stainless steel construction, a compact mass of 0.14 kg and reliable holding performance of up to 1,650 N for consistent fastening. Order the closure clamp directly via Metav Werkzeuge or consult our specialists for application advice. Closure clamp S362 by Kukamet — stainless steel latch with horizontal-foot mounting and integrated hook The Closure clamp S362 is a stainless steel horizontal-foot latch clamp designed for secure fastening and quick engagement in workshop and light industrial assemblies. Stainless steel body for corrosion resistance Horizontal-foot mounting for flat surfaces Integrated hook for positive engagement Holding force up to 1,650 N Secure fastening that supports reliable processes The compact latch is engineered to deliver dependable clamping performance where repetitive securing is required. With a holding force of 1,650 N and a pressing capability of 1,400 N, the device ensures consistent retention under load, reducing the risk of movement during machining or transport. The stainless construction provides corrosion resistance, keeping mechanical tolerances stable over time. For buyers seeking measurable improvements in fixture repeatability, this clamp offers a clear, quantifiable benefit in production environments. Fast mounting and straightforward integration Fitted with a horizontal-foot base and a 25 mm thread length, the unit allows for rapid installation on flat fixtures and tooling plates. The integrated hook permits positive engagement without additional components, which shortens set-up times and simplifies fixture design. The lightweight design (0.14 kg) minimises added mass on assemblies while maintaining structural rigidity. Technical terms: the horizontal-foot mounting refers to a base plate that sits flush on the support surface; the hook provides a form-fit connection that reduces slippage compared with friction-only clamps. Built for durability and low upkeep Constructed from stainless steel, the clamp resists environmental influences that commonly degrade mild-steel components, such as corrosion or surface pitting. This increases service life and reduces maintenance intervals. The straightforward mechanical design avoids electronics or complex assemblies, enabling quick inspections and simple replacements where necessary. Where quality assurance matters, the robust materials and clear load ratings support traceable fixture performance in scheduled maintenance and process documentation. Contact Metav Werkzeuge today for application guidance and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S362-1 GTIN: 8680731509571 Brand: Kukamet Facts Weight: 0.14 kg Max pressing force: 1,400 N Max holding force: 1,650 N Thread length: 25 mm Special features Material: Stainless steel Mounting: Horizontal foot Hook included FAQ What maximum holding capacity does the clamp provide? The clamp offers a maximum holding force of up to 1,650 N, making the Closure clamp S362 suitable for many light industrial securing tasks. Is the clamp suitable for outdoor or humid environments? The stainless steel construction of the S362 enhances corrosion resistance, improving suitability for humid or mildly corrosive environments compared with untreated steel clamps. How is the clamp mounted to a fixture? Mounting is achieved via the horizontal-foot base; the clamp includes a 25 mm thread length for secure attachment to flat plates and benches. Does the latch require additional parts for engagement? No additional parts are required for basic engagement — the integrated hook enables positive retention without extra hardware. Can the clamp be used for repeatable positioning in assembly jigs? Yes, the S362’s defined holding and pressing forces, together with its robust stainless construction, support repeatable fixture positioning in jigs and assembly fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com