Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
25mm Toggle Clamp With Hook, Horizontal Base, 1.4kN Closing Force, Zinc Plated - Kukamet
Take advantage of a compact, corrosion-resistant latch that delivers consistent clamping performance and reliable holding force for light industrial fixtures; its horizontal base and integrated hook ensure positive engagement and straightforward mounting. Order the clamp directly via Metav Werkzeuge or consult the team for specification support. 361 Kukamet toggle latch clamp — horizontal base, galvanised finish 361 is a galvanised toggle latch clamp with a horizontal base and hook, designed for secure fastening in workshop jigs, fixtures and enclosure doors where repeatable, positive latching is required Horizontal base for secure mounting Galvanised steel for corrosion resistance Hook-equipped for positive latching Holding force up to 1,650 N Robust clamping that speeds up assembly and inspection The galvanised toggle latch provides a dependable holding force of 1,650 N, translating into secure retention for small doors, access panels and light fixtures. The clamp’s mechanical action converts operator input into a compact, repeatable clamping result, reducing rework and inspection time. Built for workshop and light industrial environments, the mechanism is designed to maintain consistent force over many cycles, which supports a steady production flow and fewer fixture adjustments. Corrosion resistance for maintenance-free performance A galvanised finish protects the latch from environmental exposure, extending service life and lowering maintenance intervals. The protective coating, combined with the simple mechanical design, means fewer lubrication requirements and less downtime. For operations that demand durable attachments without specialised surface treatments, this finish offers a cost-effective balance between durability and ease of care while preserving reliable latching performance. Compact form and straightforward installation The horizontal base allows low-profile mounting where vertical clearance is limited, and the integrated hook ensures positive engagement even under vibration. With a total mass of 0.085 kg and a 25 mm thread length, the clamp is lightweight and easy to fit into existing fixtures using common fasteners. The compact dimensions favour retrofitting and toolroom applications, enabling rapid installation and repositioning on jigs or assembly benches without complex modifications. Practical applications and compatibility This latch is suited to workshop jigs, small access doors, transportation crates and light machinery guards where a secure, repeatable closure is required. The combination of a reliable holding force and corrosion-resistant surface makes it appropriate for general industrial use and maintenance tasks. Where positive engagement and compact mounting are priorities, the latch delivers functional benefits that improve operational safety and handling efficiency. For reliable toggle-latch solutions from Kukamet, contact Metav Werkzeuge for supply, specification advice and immediate order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 361-2-T GTIN: 8680731511086 Manufacturer: Kukamet Facts Maximum closing force: 1,400 N Maximum holding force: 1,650 N Weight: 0.085 kg Thread length: 25 mm eClass: 21041718 ETIM: EC011973 Special features Galvanised finish Horizontal base mounting With hook for positive latching Category: Clamps FAQ What is the maximum holding capacity of this latch? The Kukamet latch clamp provides a maximum holding force of 1,650 N, suitable for secure retention of light panels and fixtures. Is the latch suitable for outdoor or humid environments? The galvanised finish on the 361 offers corrosion resistance that is appropriate for general industrial and workshop environments, reducing maintenance needs. How is the clamp mounted? The clamp is designed for horizontal base mounting and can be fixed using common fasteners; it features a 25 mm thread length for attachment. Can this latch be used on jigs and fixtures with vibration? Yes, the hook-equipped design ensures positive engagement and maintains retention under moderate vibration typical in workshop applications. Who supplies this product and where can technical questions be directed? The latch is supplied by Kukamet; for procurement and technical queries contact Metav Werkzeuge at info@metav-werkzeuge.com or phone +49 2822 7131930. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Tool Holder E1 DIN 69880 For Indexable Drill With Internal Coolant, VDI40 - TECWERK
Take advantage of the combination of DIN‑compliant interface, VDI40 compatibility and internal coolant routing for stable, repeatable drilling cycles. Order the holder directly via Metav Werkzeuge or consult the technical team for application-specific integration. TECWERK Tool holder for indexable insert drills – VDI40, clamping ø25 mm (Form E1) The TECWERK tool holder for indexable insert drills is a DIN 69880 E1 clamping device for VDI40 turrets, designed for drilling and turning tools with internal coolant supply. DIN 69880 compliant clamping interface VDI40 shank for turret-mounted applications Clamping diameter 25 mm for insert drills Internal coolant supply compatible Predictable machining through standardised interface and rigidity The holder is built to the DIN 69880 specification and fitted for VDI40 spindles, which delivers a standardised connection that reduces setup time and simplifies tool changes. This standard conformity, combined with the Form E1 configuration, contributes to consistent concentricity and clamping stability during both drilling and light turning operations. For production environments where repeatability matters, the standardised interface translates directly into fewer scrap parts and more predictable cycle times. Stable clamping and dimensional data for accurate results Key geometry such as the 25 mm clamping diameter, a 40 mm mounting diameter and the specified axial and radial dimensions support secure seating of indexable heads and effective torque transmission. Measured values include d2 = 25 mm, d1 = 40 mm, d3 = 45 mm, d6 = 83 mm, h1 = 32.5 mm, l1 = 75 mm and l3 = 22 mm, which together define the mechanical envelope and help planners verify fitment in existing turrets. The precise dimensional definition reduces trial-and-error during integration and supports higher first‑pass yield when used with appropriately rated insert drills. Integrated coolant and workshop suitability for versatile use The provision for internal coolant routing ensures better chip evacuation and controlled cutting temperatures when paired with indexable insert drills, improving tool life and surface finish. The cylinder shank design for VDI40 mounting makes the holder suitable for a wide range of turret and toolpost systems used in small-series and industrial CNC turning centres. Combined with the holder’s standard compliance, the result is a component that integrates easily into workshop tooling racks while offering the operational benefits of cooled, stable drilling cycles. Contact Metav Werkzeuge for specification checks, rapid supply from Emmerich and advice on integrating this TECWERK holder into existing VDI40 setups Technical data Article number: 2000833668NW Product type: Tool holder for indexable insert drills Form: E1 Standard: DIN 69880 Shank: VDI40 Suitable for: indexable insert drills Internal coolant: yes Facts d2: 25 mm d1: 40 mm d3: 45 mm d6: 83 mm h1: 32.5 mm l1: 75 mm l3: 22 mm Special features Cylinder shank For drilling and turning tools with internal coolant supply Form E1 configuration Packaging unit: 1 FAQ Is the holder compatible with standard VDI40 turrets? Yes. The TECWERK tool holder is designed for VDI40 turrets and conforms to DIN 69880, making it compatible with standard turret interfaces when the dimensional envelope matches. Can the holder supply internal coolant to the cutting edge? Yes. The design includes an internal coolant routing compatible with indexable insert drill heads to improve cooling and chip control during drilling operations. What clamping diameter and mounting dimensions are relevant? Clamping diameter is 25 mm (d2); other key mounting dimensions are d1 = 40 mm, d3 = 45 mm and l1 = 75 mm, as stated for fitment checks. Is this holder suitable for both drilling and light turning tasks? Yes. The Form E1 configuration and robust clamping characteristics make it suitable for drilling and associated turning tasks when used with appropriate insert heads. Which article number should be specified when ordering? Order with article number 2000833668NW to ensure the correct TECWERK tool holder for indexable insert drills is supplied. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
25mm Tool Holder E1 For Indexable Drills With Internal Coolant, DIN 69880 - TECWERK
Take advantage of a compact, standardised holder that ensures repeatable positioning and effective internal coolant delivery; the combination of DIN 69880 conformity and a 25 mm clamping diameter supports smooth integration and reduced setup time. Order the holder directly via Metav Werkzeuge or ask the consultants for application advice. Tool holder for indexable drills, Form E1 (DIN 69880) – TECWERK A Tool holder for indexable drills, Form E1 (DIN 69880) intended for drills with internal coolant and a 25 mm clamping diameter, suitable for precision drilling and small turning operations DIN 69880 standardised interface Form E1 with internal coolant supply 25 mm clamping diameter for indexable drills Cylindrical shank, compact 71 mm length Consistent drilling performance through standardised design The holder, specified to DIN 69880, provides a predictable, repeatable interface that reduces alignment variability during changeovers. Built for indexable drills, the unit accommodates a 25 mm clamping diameter, which helps maintain axial run-out within tight tolerances when matched with high-quality inserts. The internal coolant provision supports chip evacuation and thermal stability, which in turn can extend insert life and lower overall machining costs. This focus on measurable process gains emphasises throughput and operational reliability in production environments. Seamless integration with machining systems and clear mechanical data Designed in Form E1 with a cylindrical shank and compact overall length, the holder simplifies fixture planning and tool magazine allocation on machining centres. Key geometric values such as a 71 mm overall length and defined diameters ensure predictable envelope management on turrets and tool turrets. The internal coolant channel is integrated so that coolant reaches the cutting edge without additional adaptors, enabling efficient cooling for challenging holemaking. The mechanical layout supports quick tool changes and consistent clamping force, reducing downtime and setup complexity. Trusted supply chain and practical suitability for workshops Selection of this TECWERK holder benefits from a reliable distribution and technical advisory route via Metav Werkzeuge, a partner known for making precision accessible. The compact construction and standard interface make the holder suitable for a broad range of drilling tasks where indexable tooling is preferred, while the integrated coolant option supports operations that demand stable cutting conditions. Proven stock management and a wide product range from the supplier support uninterrupted production planning and procurement certainty. Contact Metav Werkzeuge for tailored application support and to arrange delivery from Emmerich — the TECWERK Form E1 holder combines standard conformity with process-secure coolant management Technical data Article number: 2000833663NW Product type: Tool holder for indexable drills Brand: TECWERK Form: E1 Standard: DIN 69880 d2 (clamping diameter): 25 mm d1: 30 mm d3: 45 mm d6: 68 mm h1: 28 mm h2: 30 mm l1 (overall length): 71 mm l3: 22 mm Packaging unit: 1 For indexable (insert-tipped) drills Cylindrical shank Internal coolant supply for drilling and turning tools Compatible with VDI30 interface FAQ What materials is the holder intended for? The TECWERK tool holder for indexable drills is designed as a versatile clamping solution; material suitability depends on the chosen insert grade, while the holder itself supports applications across common metals when used with appropriate inserts. Will the holder fit a VDI30 turret or spindle? The holder is prepared for standardised tool interfaces in accordance with DIN 69880 and the product labelling indicates compatibility with VDI30-style connections when the machine-side interface matches the standard. Does the holder provide internal coolant to the cutting edge? Yes, the Form E1 holder integrates an internal coolant channel to supply cooling directly towards the cutting area, improving chip control and thermal consistency during drilling operations. How does the 25 mm clamping diameter affect tooling selection? A 25 mm clamping diameter defines the shank size of compatible indexable drills; matching the holder’s clamping diameter with the tool shank ensures correct centring and secure clamping for repeatable machining. Can the holder be used for both drilling and short turning operations? The component is specified for tools used in drilling and turning with internal coolant supply, offering flexibility for combined operations when indexable tooling suitable for each task is fitted. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Tool Holder E2 For Boring Bars With Internal And External Coolant, DIN 69880 - TECWERK
Take advantage of precise clamping, integrated coolant management and compatibility with DIN 69880 interfaces to reduce setup time and protect cutting tools; order this tool holder directly via Metav Werkzeuge or request application advice from our consultants. Tool holder for boring bars E2 (DIN 69880) – Clamping Ø25 mm, VDI30 (TECWERK) The Tool holder for boring bars E2 (DIN 69880) is a precision toolholder for clamping cylindrical-shank boring bars, engineered for machining centres using the VDI30 interface and offering internal and external coolant supply. DIN 69880 compatible interface VDI30 Clamping diameter 25 mm for boring bars Internal and external coolant supply No shortening of boring bar required Precise, repeatable clamping for stable machining The E2 toolholder is designed to deliver consistent axial and radial positioning for cylindrical-shank boring bars, meeting the DIN 69880 specification for standardised interfaces. The robust clamping for Ø25 mm bars prevents slippage under load and reduces run-out, which in turn protects the cutting edge and keeps components within tolerance. For workshops seeking reliable repeatability across batches, this holder translates into fewer reworks and predictable cycle times, supporting a smoother production flow and better overall process control. Integrated coolant routing that protects tools and surfaces Equipped with internal and external coolant feed, the holder improves coolant delivery directly to the cutting zone, enhancing chip evacuation and heat control. Better coolant routing reduces thermal expansion at the cutting edge and helps maintain surface finish without additional fixtures. Because no shortening of the boring bar is necessary, setup is faster and concentricity remains uncompromised; this minimises handling and the risk of setup errors, contributing to longer tool life and reduced consumable costs. Compatibility and efficient workshop integration Built for VDI30-equipped tool turrets and machining centres, the holder suits standardised setups and integrates into existing toolchange systems without modification. The E2 form and dimensional conformity simplify tool management and inventory planning. Clear technical specifications and adherence to recognized norms make procurement and qualification straightforward, while the compact design supports tight tool layouts and maximises turret space utilisation for multi-operation machining strategies. Application reassurance and service orientation For production environments processing a variety of steels, aluminium and cast materials, the holder’s standard interface and coolant capability make it a versatile option for roughing and finishing passes with boring bars. Metav’s position as a precision partner ensures transparent delivery and advice: product selection is supported by factual compatibility data and practical recommendations for clamping practice and coolant pressures, helping to match the holder to the application without ambiguity. Contact Metav Werkzeuge for application guidance or to discuss suitability for specific machining centres; technical advice is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930, and Metav can help ensure the holder integrates smoothly into existing setups. Technical data Article number: 2000833676NW SKU: 2000833676NW Brand: TECWERK Product type: Tool holder for boring bars Packaging unit: 1 Core dimensions Form: E2 Clamping diameter d2: 25 mm Shank diameter d1: 30 mm d6: 68 mm d8: 55 mm l6: 60 mm l3: 22 mm h1: 28 mm h2: 30 mm Standard: DIN 69880 Design & features For boring bars Cylindrical shank VDI30 interface Internal and external coolant feed No shortening of boring bar necessary Through-drilled: no FAQ How does the holder manage coolant supply? The holder provides both internal and external coolant feed, enabling directed coolant flow to the cutting zone to improve chip removal and temperature control for the boring bar. Is the holder compatible with VDI tool turrets? Yes, the holder is designed for the VDI30 interface and conforms to DIN 69880, making it compatible with VDI30-equipped turrets. Can the boring bar be shortened after installation? Shortening the boring bar is not required; the holder is designed so that no bar shortening is necessary, which speeds setup and preserves concentricity. What clamping size does the holder accept? The clamping diameter is 25 mm, intended for cylindrical-shank boring bars with that shank dimension. What is the article number for ordering and reference? The item is listed under article number 2000833676NW and is supplied by TECWERK as a tool holder for boring bars. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Tool Holder For Boring Bars E2 With Internal And External Coolant Supply, DIN 69880 - TECWERK
Take advantage of robust clamping, integrated coolant routing and standardised VDI compatibility to reduce set-up time and extend tool life; order directly through Metav Werkzeuge or consult our specialists for specification support. Tool holder for boring bars, Form E2 (VDI40) – TECWERK, DIN 69880, 25 mm clamping Tool holder for boring bars, Form E2 designed for cylindrical-shank boring bars with both internal and external coolant supply for precision turning and boring applications. Form E2 for cylindrical shank Internal and external coolant supply Clamping diameter 25 mm Compatible with VDI40 spindles Secure clamping that maintains concentricity and repeatability A high-precision Form E2 holder delivers stable, repeatable clamping for cylindrical-shank boring bars, improving surface finish and dimensional accuracy in serial production. The combination of a 25 mm clamping diameter and the VDI interface ensures a firm fit in standard tool turrets, reducing run-out and vibration. Compliance with DIN 69880 provides interchangeability across machines that use VDI tool holders, simplifying tool inventory and ensuring consistent results on lathes and turning centres. Integrated coolant routing minimises thermal distortion and tool wear The integrated internal and external coolant channels feed cutting fluid close to the cutting edge without modifications to the bar, which helps control cutting temperatures and evacuate chips more effectively. Because the design requires no shortening of the boring bar, set-up time is reduced and the original bar length is retained for future operations. This configuration supports higher productivity and longer tool life, particularly in demanding finishing operations where thermal stability is critical. Designed for straightforward compatibility and dependable shop-floor performance Built for compatibility with VDI40 systems and cylindrical shank bars, the holder is a practical choice for workshops aiming to standardise tooling across multiple machines. The robust construction and standard dimensions mean fewer changeovers and a lower risk of incompatible assemblies. For maintenance teams, the simple geometry eases inspection and reconditioning, while the standardised interface supports a predictable supply chain and fast replacement when needed. Contact Metav Werkzeuge today for tailored advice on TECWERK tool holders and to secure reliable delivery from our Emmerich distribution centre. Technical data SKU: 2000833683NW Product type: Tool holder for boring bars Form: E2 Manufacturer: TECWERK Packaging unit: 1 Core dimensions Clamping diameter d2: 25 mm d1: 40 mm d6: 83 mm d8: 55 mm h1: 32.5 mm l3: 22 mm l6: 75 mm Through-bored: no Special features Internal and external coolant supply Cylindrical shank compatibility Suitable for boring bars Standard: DIN 69880 VDI40 interface No shortening of boring bar required FAQ Is this holder compatible with VDI40 tool turrets? The TECWERK tool holder is built for the VDI40 interface and is compatible with standard VDI40 tool turrets that follow DIN 69880. Can coolant be supplied through the holder to the cutting edge? Yes, the holder offers both internal and external coolant supply channels to deliver cutting fluid close to the tool without modifying the boring bar. Is it necessary to shorten the boring bar before use? No shortening of the boring bar is required; the holder accepts cylindrical-shank boring bars in the specified clamping diameter. Which clamping diameter suits common boring bars? This holder is specified for a 25 mm clamping diameter (d2), matching bars manufactured to that nominal size. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Washer DIN 6340 For M24 Screws Thickness 8mm, Outer 60mm - AMF
Take advantage of the DIN 6340 conformity and the clearly specified dimensions — 25 mm bore, 60 mm outer diameter and 8 mm thickness — for reliable load distribution and predictable clamping behaviour in industrial assemblies. Order genuine AMF fastening washers via Metav Werkzeuge or consult the Metav team for compatibility advice and supply reliability. U-washer DIN 6340 for M24 screws (AMF) — 25 mm bore, 60 mm OD The U-washer DIN 6340 by AMF is a flat fastening washer engineered for use with M24 bolts in industrial and structural applications, providing standardised bearing and improved joint stability. Conforms to DIN 6340 standard 25 mm bore for precise bolt fit 60 mm outer diameter for load distribution 8 mm thickness for robust clamping Consistent fastening through standard compliance Conformity with DIN 6340 ensures interchangeability and uniform performance across production batches and suppliers. This standardised specification reduces uncertainty during procurement and assembly, as the washer's bore and form factor match established bolt sizes and seating geometries. The reliance on recognised norms supports quality assurance processes and simplifies documentation for audits and maintenance schedules. Improved joint security via larger bearing area A 60 mm outer diameter increases the bearing surface beneath the bolt head or nut, which reduces contact pressure and helps prevent material indentation on softer components. Combined with the 8 mm thickness, the washer delivers a stiffer clamp pack, limiting elastic compression under load. This results in more predictable preload retention and fewer loosening events in dynamic or vibrating environments, thereby supporting long-term joint integrity. Accurate fit and reduced assembly time The 25 mm inner bore is matched to M24 thread major dimensions, enabling a snug, concentric fit that aids rapid alignment during installation. The simple geometry of the ring-shaped washer streamlines automated or manual assembly, reducing orientation checks and handling time. Where repetitive fastening operations are performed, this predictability translates into measurable process efficiency gains and lower rework rates. Suitable applications and compatibility notes Designed primarily for standard industrial fastening tasks, the washer is suitable wherever M24 bolts are specified and a broad contact area is required for load distribution. The component is appropriate for structural connections, machine assembly, and heavy-duty fixtures that demand consistent clamp behaviour. For material-specific recommendations or to confirm compatibility with particular substrates, technical consultation is available via Metav Werkzeuge to ensure the correct selection for each application. For reliable sourcing of AMF DIN 6340 washers and guidance on selection, contact Metav Werkzeuge — Metav’s specialists provide product availability and application support from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833444NW Standard: DIN 6340 Type: Washer Brand: AMF SKU / UID: 4000833444NW Label: U-washer DIN 6340 for screws M24, bore 25 mm AMF Core measurements Bore diameter (D1): 25 mm Outer diameter (D2): 60 mm Thickness (S): 8 mm Bolt size compatibility: M24 Packaging unit: 1 Applications & features Industrial fastening Load distribution beneath nut or bolt head Standardised geometry for interchangeability Suitable for assembly and structural joints FAQ What standard does this washer comply with? The washer conforms to DIN 6340, which defines dimensions and form for this type of flat washer, ensuring reliable interchangeability. Is this washer compatible with M24 bolts? Yes — the washer is specified for M24 bolt compatibility, with a 25 mm bore designed for precise seating of the bolt shank. What are the key dimensions to check when specifying this washer? Important dimensions are the bore 25 mm, outer diameter 60 mm, and thickness 8 mm, as they determine fit, bearing area and stiffness. Can this washer improve joint stability in vibrating applications? The large outer diameter and solid 8 mm thickness increase bearing area and clamp rigidity, which helps maintain preload under dynamic conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25x250 mm Runout Test Mandrel With MK3 Shank Runout Accuracy 0.005 mm, Hardened Gauge Steel DIN 229 - Metav IndustryLine
Take advantage of the combination of industrial-grade runout precision, hardened construction and a compact, serviceable design to ensure reliable spindle alignment and repeatable inspections—order or request advice through Metav Werkzeuge for a smooth integration into the production workflow. Test mandrel MK3 — runout accuracy 0.005 mm, Ø25 × 250 mm (Metav IndustryLine) The Test mandrel MK3 is a precision gauge intended for runout testing and alignment of machine spindles with an MK3 taper, suited to quality control in toolrooms and production workshops. Extremely low runout 0.005 mm Hardened gauge steel construction MK3 Morse taper mounting Conforms to DIN 229 standard Minimise rework with industrial-grade runout control A stable reference shaft with runout accuracy 0.005 mm reduces measurement uncertainty and shortens inspection cycles. The mandrel serves as a repeatable datum for concentricity checks and balancing tasks, meaning faults are identified earlier in the process and costly rework is avoided. In practice, the low radial deviation improves detection of spindle and fixture errors, so quality assurance teams can document true machine condition rather than artefacts of the test setup. The combination of compact diameter and defined usable length provides a clear, measurable standard that integrates easily with existing inspection routines. Robust materials for reliable shop-floor performance Manufactured from hardened gauge steel and produced to DIN 229, the component offers mechanical stiffness that resists wear and deformation during routine handling. The hardened finish sustains dimensional stability across repeated insertions into the spindle taper, which prolongs service life and preserves the calibrated condition of the reference surface. The MK3 taper provides a common, secure interface with conventional spindles and adapters, reducing the need for bespoke fixtures. This robustness translates into fewer interruptions for repair and less frequent replacement, improving uptime on critical machines. Faster alignment and verifiable measurements With a usable shaft of Ø25 × 250 mm and a total length suited to the task, the mandrel balances reach and handling convenience. The weight and geometry aid stable seating in the spindle, supporting faster rough alignment followed by fine adjustment using dial indicators or measuring probes. Using a single, well-specified mandrel for both concentricity checks and alignment tasks streamlines procedures: one tool for runout measurement, balancing setup and verification of collets or chucks. Documentation of results becomes straightforward, supporting traceable quality workflows and supplier audits. Workshop-ready supply and brand assurance Sourced via Metav IndustryLine, this test mandrel benefits from a supplier approach that emphasises accessibility and consistent quality across a broad catalogue. Metav’s handling in Emmerich acts as a quality filter for the European market, offering secure logistics and product availability so that calibration programmes and maintenance schedules remain predictable. For organisations seeking dependable metrology tools without excessive supplier overhead, the combination of certified production standards and Metav’s distribution network supports both procurement simplicity and long-term process reliability. Contact Metav Werkzeuge for application advice or to request the Test mandrel MK3 for integration into production checks—technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: M318.933 GTIN: 4054469183923 Type: MK3 Standard: DIN 229 Facts Diameter × usable length: Ø25 × 250 mm Total length: 355 mm Weight: 2.5 kg Runout accuracy: 0.005 mm Special features Material: hardened gauge steel Application: Runout testing and spindle alignment with MK mounting Category: Gauges / Lehren Brand: Metav IndustryLine FAQ What level of runout can be expected from this mandrel? The mandrel delivers a runout accuracy of 0.005 mm as supplied; this specification applies to the Test mandrel MK3 (Metav IndustryLine, SKU M318.933). Is the mandrel compatible with standard spindle tapers? Yes, the tool is supplied with an MK3 (Morse taper 3) interface, allowing secure seating in spindles and adapters designed for that taper. Which material is used for the shaft and why does it matter? The shaft is made from hardened gauge steel, chosen for dimensional stability and wear resistance so that the reference surface remains reliable under repeated use. Can this mandrel be used for both concentricity checks and alignment tasks? Yes, the Ø25 × 250 mm usable shaft and the precise runout make it suitable for concentricity measurement, balancing preparations and spindle alignment operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25x30x19mm Step Block - Vertex
Take advantage of the compact dimensions and the step clamping geometry to save fixture space and improve repeatability; order the clamping element directly via Metav Werkzeuge or consult the team for integration advice. Vertex Step Block – compact clamping block, 25 x 30 x 19 mm A Vertex Step Block serving as a compact clamping element for step-fixturing in workshop and production environments Compact footprint 25 x 30 x 19 mm Designed for step clamping operations Compatible with modular fixture systems Geometry optimised for repeatable positioning Space-efficient fixturing that saves bench space The compact format of this clamping element allows denser layouts on tooling plates and fixtures. With a measured size of 25 x 30 x 19 mm, the unit reduces the space required for stepped support points while preserving access for tooling and coolant. This space economy helps to increase the number of workpieces per fixture, shortening changeover cycles and enabling higher throughput without enlarging the setup area. Consistent positioning for repeatable processes Built to serve as a step element within clamping assemblies, the component ensures repeatable positioning and stable contact points during machining or assembly operations. The stepped geometry translates small setup tolerances into reliable repeatability, reducing rework and inspection effort. For process planners, this means measurable improvements in cycle stability and a reduced rate of dimension-related rejects. Straightforward integration into modular systems The form factor and design intent of the block support rapid incorporation into existing modular fixtures and clamping rails. Where retrofitting is required, the small footprint and defined step profile make alignment and locating straightforward during assembly or replacement. This ease of integration reduces machine downtime and simplifies inventory management for repair or expansion projects. Supply reliability and quality assurance from Metav Sourced under the Vertex brand and listed as SKU 5114, the component is distributed via Metav’s European hub, which functions as a practical quality filter for workshop supplies. The local stock and systematic supply processes ensure timely availability for production runs and maintenance windows. Relying on a centralised supplier network supports continuous operation and provides certainty when planning production schedules. Contact Metav Werkzeuge today for availability, integration advice and to order the Vertex Step Block (SKU 5114) from our Emmerich warehouse Technical Data Article number: 5114 GTIN: 4061905083501 Designation: Step Block Brand: Vertex Facts Dimensions: 25 x 30 x 19 mm ECLASS: 21170107 Special features Application: step clamping element Category: Vertex Asset files available: 5114-technische-zeichnung.jpg, 5114-main.jpg, 5114-detail.jpg FAQ What are the exact dimensions of the step block? The Vertex Step Block (SKU 5114) measures 25 x 30 x 19 mm. What is the primary application of this component? The step block is intended as a clamping and locating element for step-wise fixturing in modular fixtures and workshop tooling. Is the component suitable for repeated production runs? Yes, the block’s stepped geometry provides stable contact points that support repeatable positioning and consistent machining cycles. Which product files are supplied for design integration? Available files include a technical drawing and product images: 5114-technische-zeichnung.jpg, 5114-main.jpg, and 5114-detail.jpg. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25x45x30mm T-Slot Clamping Jaw Set, 4 Pieces - Vertex
Compact dimensions combined with a four-piece delivery and a solid set weight make the CK-3718 an economical choice for secure fixture work in machine T-slots. Order the T-slot clamping jaws directly via Metav Werkzeuge or ask our consultants if needed. T-slot clamping jaws CK-3718 by Vertex — compact 25 × 45 × 30 mm, set of 4 A compact set of T-slot clamping jaws CK-3718 designed for secure fixturing in standard machine table T-slots, suitable for repetitive clamping tasks and confined setups. Compact 25 × 45 × 30 mm profile Delivered as a set of 4 pieces Suitable for machine T-slots Set weight 0.9 kg for stable handling Deliver consistent, repeatable clamping for production The CK-3718 supports precision clamping in repetitive setups by offering consistent geometry across the supplied components. Supplied as a set of 4, these fixture jaws simplify fixture preparation and reduce setup variation, which in turn improves process reliability. The compact geometry minimises obstruction on the table while maintaining stable contact behaviour, allowing for predictable tightening forces and reduced rework. Save space without sacrificing fixture stability With a profile of 25 × 45 × 30 mm, the jaws provide a low-profile solution for workshops where machine table real estate is limited. The combined 0.9 kg mass of the set contributes to a reassuring tactile stability during handling and positioning. This compact format supports tighter part spacing and makes the set suitable for fixtures where clearance is restricted, enabling more efficient use of the work area and quicker cycle preparation. Broad compatibility with standard T-slots and straightforward integration Engineered for use with conventional T-slot tables, the clamping jaws integrate into existing fixturing arrangements with minimal adaptation. Their uniform dimensions across the set aid in creating symmetrical clamping arrangements and consistent contact points, which supports improved part stability during machining. The straightforward form factor shortens planning time for jigs and makes the set a practical choice for both quick job changes and longer production runs. Request tailored advice from Metav Werkzeuge for the Vertex CK-3718 T-slot clamping jaws, available from our Emmerich warehouse Technical data Article number: CK-3718 GTIN: 4061905087431 Dimensions: 25 x 45 x 30 mm Weight (set): 0.9 kg Pieces per set: 4 Brand: Vertex Core data Weight: 0.9 kg Pieces per set: 4 Dimensions: 25 x 45 x 30 mm EClass: 21022190 Features Supplied as a set SKU: CK-3718 Suitable for T-slot tables Manufacturer: Vertex FAQ What material are the jaws made from? The available product information for the CK-3718 does not specify the material; enquiries about material composition can be directed to Metav Werkzeuge for clarification. Are these jaws compatible with all T-slot sizes? The CK-3718 is designed for standard T-slot applications; compatibility depends on slot dimensions and should be checked against the stated dimensions of 25 x 45 x 30 mm. How many pieces are included in one delivery unit? One set contains four pieces, supplied together for consistent fixture setups. Can the CK-3718 be used for repeatable series production? Yes, the uniform geometry and set delivery make the CK-3718 suitable for repeatable clamping and series production where consistent contact points are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25x47x30mm Step Block Steel Clamping Step With Serrated Face - Vertex
Take advantage of a compact, precision-focused clamping solution that improves setup repeatability and saves space on the tooling bench. The combination of robust step geometry and proven manufacturing quality supports consistent part location, while straightforward integration into modular clamping systems minimises downtime. Order the Step Block directly via Metav Werkzeuge or ask our consultants for application advice. Step Block — compact precision clamping block with defined step geometry (Vertex) Step Block is a compact clamping component intended for precise location and repeatable setups in workshop and machine-tool environments. Compact design 25 x 47 x 30 mm Precision step for reliable positioning Easy integration into modular clamping systems Supplied by Vertex, industrial quality Minimise setup time with compact, repeatable positioning The compact geometry of this clamping element provides a clearly defined locating surface that reduces trial-and-error during fixture assembly. With dimensions of 25 x 47 x 30 mm (L x W x H) the component suits confined workholding spaces while maintaining precision and stability. Where repeatable part location is required, the well‑defined step profile supports fast alignment and fewer adjustments, which improves machine utilisation and throughput. This benefit is particularly relevant for production-focused workshops seeking measurable gains in setup efficiency. Reliable manufacturing for consistent clamping performance Manufactured under Vertex quality standards, this step clamping component offers consistent form and surface integrity that contribute to predictable behaviour under load. The focus on dimensional accuracy enhances repeatability across multiple fixtures and batches, aiding process control and reducing scrap rates. Clear technical documentation and available drawings support planning and CAD verification prior to installation, making the component a practical element in standardised workholding strategies and jigs. Practical integration and measurable operational advantages Designed for compatibility with modular fixture arrangements, the step block simplifies the construction of stable clamping assemblies without complex machining. Its defined step surface functions as a positive location point, improving fixturing reliability when combined with clamps, pins or blocks. The measurable benefit is fewer reworks and quicker changeovers — a rational advantage for workshops aiming to increase productivity while keeping tooling complexity low. Images and technical drawings are available to confirm fitment and orientation during the design phase. Contact Metav Werkzeuge for tailored advice on integrating the Vertex Step Block into existing fixtures or to request CAD-ready drawings and procurement support from Metav Werkzeuge Technical Data SKU: 5124 GTIN: 4061905089411 ECLASS: 21170107 Dimensions: 25 x 47 x 30 mm (L x W x H) Facts Article number: 5124 GTIN: 4061905089411 ECLASS code: 21170107 Special features Step geometry for positive locating Compact footprint for confined setups Supplied with technical drawing and detail imagery Brand: Vertex FAQ What is the primary application of this component? The Step Block is used as a locating and clamping element in workshop and machine-tool fixtures where defined step positioning improves setup repeatability. Which dimensions define the block? Dimensions are 25 x 47 x 30 mm (L x W x H) for the Vertex Step Block, suitable for compact fixturing arrangements. Can the block be integrated into modular clamping systems? Yes, the Step Block is designed to be compatible with modular fixture setups and works effectively alongside common clamps and locating pins. How can installation and orientation be verified before procurement? Technical drawings and detail images for the Vertex Step Block (SKU 5124) are provided to check fitment and orientation during planning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25x47x59mm Step Block, Precision Machined Steel - Vertex
Take advantage of the combination of compact dimensions, reliable height support and easy integration into clamping setups for consistent workstation results. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Step Block 5134 – Precision clamping step block, 25 x 47 x 59 mm (Vertex) The Step Block is a compact, stepped support component for height positioning and clamping tasks in workshop fixtures and modular jigs. Compact stepped height support 25 x 47 x 59 mm Intended for clamping and height positioning Compatible with modular fixture setups Vertex industrial quality, SKU 5134 Precise height positioning for consistent setups The Step Block provides a straightforward solution for repeatable height positioning in clamping arrangements. Its 25 x 47 x 59 mm geometry creates defined contact planes that simplify setup and reduce adjustment time. For production and assembly tasks where repeatability matters, the clearly defined steps support uniform clamping heights and predictable part orientation. The compact footprint makes the component suitable for constrained fixturing environments while preserving access to the workpiece. Integrates cleanly with jigs and fixture systems With a simple stepped profile, the component is designed to be incorporated into existing fixture and jig systems without complex modification. The uncomplicated form factor aids rapid installation and alignment in modular assemblies, helping to shorten machine downtime during changeovers. Where process efficiency is key, the block’s compatibility with common clamping layouts supports faster set-up cycles and consistent part presentation to tools and inspection devices. Practical design for everyday workshop reliability A minimal, functional design emphasises robustness and straightforward handling during routine operations. The stepped arrangement provides multiple discrete support heights, which helps reduce the need for shims or custom spacers and streamlines adjustments on the shop floor. As a Vertex production component, the unit aligns with industrial expectations for durability and consistent manufacture. Traceable identification via SKU 5134 and the included gallery images supports verification and installation planning prior to procurement. Contact Metav Werkzeuge in Emmerich for technical clarification on the Vertex Step Block 5134 and to request specification support or procurement guidance from our precision team Technical data Article number: 5134 GTIN: 4061905090776 ECLASS: 21170107 Name: Step Block Manufacturer: Vertex Facts Dimensions: 25 x 47 x 59 mm GTIN: 4061905090776 SKU: 5134 Special features Intended for clamping and height positioning Category: Vertex Gallery images available FAQ What are the exact dimensions of this step block? The Step Block has dimensions of 25 x 47 x 59 mm, which define its stepped support geometry for clamping applications. Which type of applications is the block intended for? The block is intended for height positioning and clamping tasks within jigs, fixtures and modular setups in workshops and production cells. What is the SKU and GTIN for ordering and verification? The product is listed as SKU 5134 with GTIN 4061905090776 for order and inspection purposes. Are there images available to check the design before procurement? Yes, gallery images are provided to assist with visual inspection and planning prior to purchase. Who manufactures the component and where is it made? The component is manufactured by Vertex; the vendor information is provided for traceability and specification checks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
26 mm Step Clamp M24 Bolt, 50x150x32mm - Vertex
Take advantage of the combination of compact dimensions, a robust M24 stud and secure seating in a 26 mm T-slot for dependable fixture clamping; order directly via Metav Werkzeuge or ask the consultants for application advice. Step Clamp — Vertex compact clamping element with M24 stud for 26 mm T-slots The Step Clamp is a compact, step-style clamping element designed for secure workpiece retention in machining fixtures that use a 26 mm T-slot, offering a space-saving solution for versatile fixturing. Robust M24 stud for secure fixation Compatible with 26 mm T-slot systems Compact footprint: 50 x 150 x 32 mm Low mass of 1.15 kg for ease of handling Reliable clamping with fast set-up and repeatability Engineered for dependable workholding, the clamp uses an M24 stud that secures directly into a 26 mm T-slot, providing positive force transmission and simple mechanical engagement. The stepped geometry permits rapid vertical positioning on the fixture rail, which reduces set-up time and improves throughput. By converting the stud torque into consistent clamping pressure, this clamping element supports repeatable results across batches, helping to maintain machining tolerances and reduce costly rework. The combination of a proven fastening size and a defined T-slot interface ensures compatibility with standard fixture tables and fixturing plates. Space-saving design that simplifies fixture layouts With external dimensions of 50 x 150 x 32 mm and a mass of 1.15 kg, the component is optimised for dense fixture environments where usable table area is limited. The compact form factor allows several clamps to be installed close to the workpiece without obstructing tool paths, improving accessibility during multi-operation setups. Lower mass makes manual handling and rapid repositioning easier during frequent changeovers, while the slim profile reduces the risk of collision with rotating tools. The design therefore supports both efficient shop-floor ergonomics and better machine uptime. Compatibility across workshop environments and straightforward maintenance The step-style clamping element is suited to general clamping tasks in milling and machining centres that accept a 26 mm T-slot; compatibility with common fixture standards facilitates integration into existing setups. The component’s simple mechanical construction minimises maintenance needs: routine inspection of the stud and cleaning of the T-slot seating are typically sufficient to preserve performance. Where tighter process control is required, the clamp’s reliable seating contributes to predictable clamping forces and consistent part registration, supporting higher process stability and reduced scrap rates. Request supply of Vertex clamping solutions from Metav Werkzeuge to secure reliable M24 step clamping; contact our specialists in Emmerich by email (info@metav-werkzeuge.com) or phone (+49 2822 7131930) for tailored advice and order coordination Technical Data Article number: 6417 GTIN: 4061905087219 eClass: 21170107 Manufacturer: Vertex Facts Dimensions: 50 x 150 x 32 mm Bolt: M24 T-slot width: 26 mm Weight: 1.15 kg Special features SKU: 6417 Images: 6133-main.jpg, 6133-detail.jpg, 6133-technische-zeichnung.jpg Category: Vertex FAQ What T-slot does the clamp fit? The clamp is designed for a 26 mm T-slot and seats directly in that slot for secure fixation. Which bolt size secures the clamp? Fixation is via an M24 stud; the robust thread size provides reliable clamping force in standard fixture applications. What are the external dimensions and weight? External dimensions are 50 x 150 x 32 mm and the mass is 1.15 kg, making it compact and easy to handle. Is the clamp suitable for high-speed machining setups? The clamp provides positive mechanical seating in a 26 mm T-slot; stability during machining depends on the overall fixture design and application parameters. How is the clamp identified for ordering or replacement? Order or reference the component using SKU 6417 and GTIN 4061905087219 from Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
26 mm T-Slot Step Clamp M24 Threaded Bolt, 50x200x35mm - Vertex
Take advantage of the compact dimensions and the robust M24 bolt for reliable fixturing on 26 mm T‑slot tables; the compact footprint and 2 kg mass make for easy handling and low-profile clamping. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Step Clamp – Vertex compact step clamp with M24 bolt and 26 mm T‑slot compatibility The Step Clamp is a compact clamping device for machining tables and modular fixturing that secures workpieces at stepped heights for versatile setups in milling and drilling operations. Compact 50 x 200 x 35 mm footprint Robust M24 bolt for secure fastening Compatible with 26 mm T‑slot systems Lightweight design at approximately 2 kg Precision clamping that saves setup time This step clamping solution delivers a dependable balance between size and function. The compact 50 x 200 x 35 mm footprint minimises obstruction on the worktable while the M24 bolt provides the clamping force required for stable machining. For workshops where fixture space is limited, the low-profile design reduces collisions with toolpaths and allows more flexible placement of clamps and stops. The mechanical simplicity also shortens adjustment cycles, enabling quicker part changeovers and higher machine utilisation. Straightforward compatibility with T‑slot workholding Designed for use with standard T‑slot tables, the clamp matches 26 mm T‑slot dimensions for direct insertion and secure seating. The stepped top allows different height positions without additional shims, simplifying height alignment in multi‑operation setups. Where fixtures need repeatable positioning, the clamp reduces the need for bespoke adapters and keeps the fixturing modular. The physical dimensions are listed for easy verification against existing clamping systems before procurement. Built for reliable workshop performance Constructed for industrial use, this clamp combines a practical mass with a robust threaded connection to withstand machining loads. The approximately 2 kg mass contributes to stability without adding unnecessary weight during handling. The stepped geometry is engineered to transfer clamping force efficiently, reducing the chance of workpiece movement under cutting conditions. For manufacturing environments that require consistent outcomes, the clamp offers a simple yet effective way to maintain positional accuracy across runs. Easy integration into production workflows The clamp’s clear mechanical concept enables fast training for operators and straightforward inclusion in standard operating procedures. Its compatibility with common T‑slot widths and the standardised M24 fastening thread mean that adapters, bolts and related hardware are widely available and interchangeable. This promotes a predictable supply chain and faster replacement if required. For customers seeking to centralise procurement, the clamp fits well into a one‑stop supply approach for fixturing components. Secure precise fixturing with Vertex’s step clamp — contact Metav Werkzeuge for tailored application advice and reliable delivery from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 6427 GTIN: 4061905089268 Manufacturer: Vertex eClass: 21170107 Numbers / Core technical data Dimensions: 50 x 200 x 35 mm Weight: 2 kg T‑slot width: 26 mm Bolt thread: M24 Designs / Special features Step clamp design for height variation Low‑profile footprint for tight setups Suitable for modular fixturing systems FAQ What table systems is this clamp compatible with? The clamp is compatible with tables that have a 26 mm T‑slot, so it seats directly into standard T‑slot grooves used in many machining centres. Which thread size does the clamp accept for fastening? Fastening is via an M24 bolt connection; the thread size is integrated into the clamp’s design to provide a secure and standardised attachment. Is the clamp suitable for heavy milling operations? The clamp’s stepped geometry and M24 connection are intended for secure fixturing; suitability for specific heavy milling tasks should be assessed in conjunction with the machine and cutting parameters. What are the exact external dimensions and mass for planning fixture layouts? External dimensions are 50 x 200 x 35 mm and the mass is approximately 2 kg, providing a compact, low‑profile option for fixture planning. Who manufactures the clamp and how can more technical details be obtained? The clamp is supplied by Vertex; for further technical specifications or application guidance, consult the product listing or contact Metav Werkzeuge for support. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
26.5mm Rubber Flex Collet For Threading Attachment VTA7, Ø5.36–Ø9mm - Vertex
Take advantage of the combination of secure, damage‑reducing clamping and straightforward workshop checks for uninterrupted threading operations; order the collets directly via Metav Werkzeuge or consult our team for application guidance. Rubber-Flex collets FC for thread-cutting machine VTA7 — secure clamping, compact 26.5 mm diameter Rubber-Flex collets FC for thread-cutting machine VTA7 provide reliable clamping for thread-cutting applications on VTA7 systems and are designed for simple inspection with common workshop calipers Rubber-Flex design for secure gripping For VTA7 thread-cutting machines Compatible with calipers Ø5.36–Ø9 mm Diameter 26.5 mm, length 15 mm Reduced thread damage through elastic clamping The Rubber-Flex collet concept uses an elastic clamping surface that reduces radial point loading, which helps to preserve delicate thread profiles during cutting. By distributing clamping forces more evenly than rigid alternatives, the sleeve minimises distortion and burr formation; this results in consistent thread geometry and fewer rework cycles. The compact 26.5 mm diameter and short 15 mm length support tight tool envelopes and efficient use of spindle space, contributing to dependable throughput in repetitive operations. Engineered for VTA7 machines and rapid inspection Designed specifically for the VTA7 thread-cutting apparatus, this clamping sleeve aligns with common workshop inspection routines: the collet is compatible with handheld calipers in the range Ø5.36–Ø9 mm, enabling quick verification of gripping size and runout without special gauges. The clear compatibility reduces setup uncertainty and shortens quality checks, helping maintain steady production speeds. Where traceability is required, the product is listed under SKU FC-30 and GTIN 4061905086717 for cataloguing and procurement. Simple fit that keeps workshop throughput steady Installation and replacement are kept straightforward by the collet’s compact form factor and standardised interface for the VTA7 unit, which reduces downtime during tooling changes. The design focus on repeatable seating and elastic contact means fewer adjustments between cycles, delivering a practical benefit for workshops that prioritise uptime and predictable performance. The result is a component that supports efficient processes and integrates into existing tool control routines without extensive retraining. For procurement or technical advice on Vertex Rubber-Flex collets (FC-30) contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for reliable supply and application support from Emmerich Technical data SKU: FC-30 GTIN: 4061905086717 Article: Rubber-Flex collets for thread-cutting machine VTA7 Core measurements Diameter: 26.5 mm Length: 15 mm Caliper range: Ø5.36–Ø9 mm eClass: 21041712 Compatibility and features For thread-cutting machine VTA7 Designed for secure, elastic clamping Compatible with handheld caliper inspection Brand: Vertex FAQ Which machines is this clamping sleeve intended for? The Rubber-Flex collet is designed for the VTA7 thread-cutting machine and listed as SKU FC-30 for clear identification in procurement and maintenance records. What are the key dimensions to check during setup? Check the 26.5 mm diameter and 15 mm length; the gripping range is compatible with calipers from Ø5.36 to Ø9 mm for quick workshop inspection. How is runout or grip size verified? Use a handheld caliper within the specified range to verify external dimensions and seating; the collet’s compatibility with standard calipers simplifies routine checks for quality control. Is the product traceable for inventory and ordering? Yes; the collet is identified by SKU FC-30 and GTIN 4061905086717, facilitating ordering, stock management, and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
26.5mm Rubber Flex Collet For Threading Unit VTA7, Ø10.38–Ø14mm - Vertex
Reliable clamping for thread‑cutting operations: the combination of flexible rubber clamping, a precise diameter fit and compact installation length secures workpieces while minimising deformation. Order the collets directly via Metav Werkzeuge or consult our advisers for compatibility checks. Rubber‑Flex collets FC for VTA7 — flexible rubber clamping, precise diameter fit The Rubber‑Flex collets FC for VTA7 are flexible clamping inserts designed for thread‑cutting heads and compact fixtures where gentle, secure clamping is required without damage to soft or finished surfaces. Flexible rubber clamping insert Fits diameters Ø10.38–Ø14 mm Compatible with VTA7 thread‑cutting head Secure holding with minimal workpiece stress The flexible sleeve design provides a gentle yet secure grip, making these collets suitable for fixtures that must avoid marring or distorting delicate components. The Rubber‑Flex concept uses an elastic clamping surface to distribute contact pressure more evenly than hard‑metal alternatives; this reduces the risk of surface damage during thread cutting and makes handling fragile parts straightforward. The result is improved first‑pass quality and fewer rework cycles. Precision fit and quick inspection capability Designed for tight tolerances, the clamping insert accepts diameters from Ø10.38–Ø14 mm, enabling quick checks with a precision caliper and reliable repeatability between setups. The compact construction and defined inner diameter ensure concentricity in rotating applications on the VTA7 head, supporting consistent thread geometry and reduced scrap. The product is supplied as FC‑31, matching standard mounting interfaces for rapid replacement and traceability. Robust performance for production environments The clamping sleeve provides dependable performance in repetitive operations, preserving component finish while maintaining positional stability under cutting forces. Its compact length supports high‑density tooling layouts and simplifies changeovers in tight setups, contributing to uninterrupted production flow. Specified compatibility and a consistent manufacturing standard help integrate the collet into existing tool inventories with minimal adaptation. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability of Vertex FC-31 collets for VTA7 applications and secure a reliable supply for precision clamping needs Technical Data SKU: FC-31 GTIN: 4061905088995 Brand: Vertex Facts Diameter: 26.5 mm Length: 15 mm Suitable diameters: Ø10.38–Ø14 mm EClass: 21041712 Special features Clamping style: Rubber‑Flex flexible sleeve Compatibility: VTA7 thread‑cutting head Application: gentle clamping of finished or delicate workpieces FAQ What is the primary benefit of using these flexible collets? The flexible sleeve design provides secure holding with reduced surface stress, so the Rubber‑Flex collets help preserve finishes and lower rework rates in thread‑cutting tasks. Can these collets be used directly on a VTA7 thread‑cutting head? Yes, the FC‑31 collet is specified for compatibility with the VTA7 thread‑cutting head and matches standard mounting interfaces. What diameter range is supported and how is it checked? The clamping insert supports diameters from Ø10.38 to Ø14 mm, which can be verified using a precision caliper for quick and repeatable inspection. Is the product traceable for procurement and inventory? The collet is listed as SKU FC‑31 with GTIN 4061905088995 to aid inventory management and procurement tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2640N Holding Force 2500N Thrust Bar Clamp M8x50 Spindle Zinc Plated Without Foot - Kukamet
Take advantage of the combination of a galvanised body, measurable 2,500 N pressing force and a lightweight 0.36 kg design for dependable clamping and simplified fixture integration. Order the push-pull clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-pull clamp 513 — Galvanised push-pull clamp with M8x50 spindle and 2,500 N pressing force (Kukamet) Push-pull clamp 513 is a compact clamping device for fast, repeatable securing of workpieces in assembly and fixture applications Galvanised steel construction 2,500 N clamping force Compact 0.36 kg lightweight design Reliable clamping with measurable force The push-pull clamp delivers a repeatable linear action, converting spindle movement into secure holding pressure. With a rated pressing force of 2,500 N and a holding force of 2,640 N, this component provides measurable performance that reduces slippage and rework in production environments. The specified values help planners and engineers calculate fixture safety margins and cycle loads, supporting predictable process performance and higher first-time-right rates. The galvanised finish contributes to consistent behaviour over time by resisting surface corrosion and maintaining contact geometry under typical workshop conditions Space-efficient design speeds up fixture layout Designed without a foot, the clamp occupies minimal space on trolleys, plates and modular fixturing, enabling closer component placement and simpler fixture geometry. The integrated pressure spindle M8x50 provides standardised adjustment and compatibility with common tooling threads, while the low mass of 0.36 kg eases handling during set-up and reduces added inertia in moving fixtures. These attributes make the unit well suited for compact assembly lines, welding jigs and repetitive test rigs where footprint and swift changeovers are essential Low-maintenance component engineered for workshop use Constructed from galvanised material and featuring a straightforward push-rod mechanism, the clamp is designed for long service intervals with minimal upkeep. Linear motion and robust contacts mean fewer wearing parts; routine inspection and light lubrication are normally sufficient to preserve performance. The simple mechanical design supports quick replacement in modular systems and predictable behaviour in mixed-material applications, making it a practical choice for industrial workshops and technical maintenance departments that prioritise reliability and uptime Contact Metav Werkzeuge for advice on integrating the Kukamet push-pull clamp 513 into existing fixtures or to arrange rapid supply from Emmerich through Metav Werkzeuge's distribution network Technical data SKU: 513-3 GTIN: 8680731502725 ECLASS: 21041716 ETIM: EC011973 Facts Max pressing force: 2,500 N Holding force: 2,640 N Weight: 0.36 kg Pressure spindle: M8 x 50 Special features Galvanised construction Without foot (space-saving) Manufacturer: Kukamet FAQ What clamping force can be expected from this clamp? The Kukamet push-pull clamp 513 provides a rated pressing force of 2,500 N and a holding force of 2,640 N, values intended for planning safe fixture loads Is the clamp suitable for compact fixturing and welding jigs? Yes, the compact design and the fact that the clamp is supplied without a foot make it suitable for close-packed fixturing and welding applications where space is limited What type of spindle does the clamp use and how is it adjusted? Adjustment is made via the M8x50 pressure spindle; this standard thread and travel enable fine tuning of the rod position during set-up How resistant is the surface to workshop environments? The galvanised finish on the push-pull clamp 513 provides corrosion resistance appropriate for typical workshop conditions and supports long-term, low-maintenance use Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
265mm Morse Taper Extension Sleeve MT4×MT4 Hardened Ground, DIN 2187 - TECWERK
Take advantage of the combination of DIN 2187 conformity, fully hardened and ground surfaces and precise MK4 taper fit to maintain tool concentricity and production reliability; order directly via Metav Werkzeuge or consult the team for application advice. Extension sleeve DIN 2187 MK4×MK4 — hardened and ground, 265 mm overall length (TECWERK) The Extension sleeve DIN 2187 MK4×MK4 is a hardened, ground adapter for extending Morse taper tooling, designed for accurate tool holding and consistent centring in machine spindles and tailstocks. DIN 2187 standard, precision version Fully hardened and ground inside and out For tools with Morse taper MK4 to MK4 265 mm overall length, 48 mm diameter Reliable accuracy for repeatable machining results The extension sleeve is manufactured to DIN 2187, ensuring defined tolerances and a reproducible interface for Morse taper tooling. Its hardened and ground inner and outer surfaces reduce wear and maintain tight contact between tool and adapter, which improves concentricity and minimises radial deviation during machining. For production environments where tooling repeatability matters, the precision finish translates directly into fewer quality checks and less scrap. Straightforward compatibility and secure seating With both inner and outer tapers specified as MK4, the adapter matches standard Morse taper toolholders and accessories, enabling seamless integration into existing setups. The geometric dimensions — 48 mm outside diameter and an overall length of 265 mm with a usable L1 of 147.5 mm — provide predictable extension while preserving rigidity. Because the taper fits are ground to specification, seating is secure and the risk of slippage under load is significantly reduced, which supports consistent cycle times in workshop and light production use. Built for longevity and low maintenance in the workshop The all-hardened construction combined with precision grinding reduces fretting and surface damage, extending service life compared with non-hardened alternatives. The design requires minimal upkeep: regular inspection and light cleaning of the taper seats are usually sufficient to retain accurate seating. Given the material treatment and finish, the adapter offers a long service interval and reliable performance, contributing to stable production processes and lower total cost of ownership over time. For tailored technical advice or to secure supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and delivery details Technical Data Article number: 2000832366NW Standard: DIN 2187 Product type: Extension sleeve Inner taper: MK4 Outer taper: MK4 Overall length: 265 mm Diameter D: 48 mm Usable length L1: 147.5 mm Accuracy version Fully hardened and ground inside and out For tools with Morse taper Packaging unit: 1 FAQ Is this adapter compatible with standard MK4 toolholders? Yes. The Extension sleeve DIN 2187 MK4×MK4 from TECWERK is specified with both inner and outer MK4 tapers and is intended for use with standard Morse taper tooling (SKU 2000832366NW). What benefits does the hardened and ground finish provide? The hardened and ground surfaces on this extension sleeve increase wear resistance, improve seating accuracy and reduce runout compared with untreated adapters, enhancing machining consistency. What are the key dimensions to consider when fitting this sleeve? Key dimensions are an overall length of 265 mm, an outside diameter of 48 mm, and a usable length L1 of 147.5 mm, which determine extension and clearance in the machine setup. Can the sleeve be used for heavy-duty turning and milling? The precision finish and hardened construction improve load capacity compared with non-hardened adapters; suitability for heavy-duty operations should be assessed against specific machine and tooling loads. How often should the taper seats be inspected? Regular visual inspection and light cleaning after routine use are recommended; frequency depends on operating conditions, but inspections before critical runs help maintain accuracy. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
26x40mm Coupling M16x2mm Thread, 0.128kg - Vertex
The combination of a compact footprint, a standard M16x2mm threaded interface and low mass ensures reliable, space‑efficient assemblies with simplified handling. Order the coupling directly via Metav Werkzeuge or ask our consultants for application advice. 2615M coupling by Vertex — compact M16x2 threaded connector, 26 x 40 mm The 2615M coupling is a compact mechanical connector designed for precise, secure threaded connections in workshop and industrial assemblies. Compact 26 x 40 mm footprint M16x2mm standard threaded connection Lightweight: 0.128 kg per unit Vertex manufacturing quality Save installation space with a compact design The 26 x 40 mm format offers a small physical footprint that helps to reduce assembly bulk and improves machine layout flexibility. A compact connector like this enables closer packing of components without compromising structural integrity, which can be decisive in dense assemblies and retrofit situations. The reduced space requirement also simplifies access for inspection and maintenance, supporting efficient workshop workflows while maintaining precision alignment. Secure, standardised thread for consistent performance Built around a M16x2mm thread, the coupling provides a widely recognised and easily matched connection standard for metric systems. The standard thread pitch supports predictable assembly behaviour and repeatable clamping forces, which reduces variability in production and inspection. Specifying a coupling with a standardised interface simplifies inventory management and compatibility checks across fixtures and fasteners, contributing to reliable machine performance and reduced downtime. Low mass for easier handling and reduced dynamic load With a mass of 0.128 kg, the unit is deliberately lightweight to ease manual handling and to limit added inertia in rotating or moving subassemblies. A reduced component weight can lower wear on bearings and decrease the torque required for actuation, helping to extend the service life of adjacent parts. The light construction therefore contributes both to ergonomic benefits during assembly and to longer component lifecycles in dynamic applications. Workshop-suitable quality and dependable supply Manufactured by Vertex, the coupling reflects consistent production tolerances and established machining practices. Supplied through Metav Werkzeuge, the product comes with the backing of a distributor focused on democratising precision: a broad catalogue, robust logistics from Emmerich and decades of industry expertise mean dependable availability and suitability for industrial, trade and specialist retailers. This supply reliability supports continuous production and reduces the risk associated with sourcing critical small parts. For secure metric connections choose the Vertex 2615M coupling — contact Metav Werkzeuge for tailored application advice and reliable delivery from Emmerich: info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271 Technical data SKU: 2615M GTIN: 4061905092602 ECLASS: 21131711 Facts Dimensions: 26 x 40 mm Thread: M16x2mm Weight: 0.128 kg Special features Compact mechanical coupling Standard metric threaded interface Vertex brand manufacturing FAQ Is this coupling compatible with standard M16 fittings? Yes. The coupling features a M16x2mm thread and is compatible with standard metric M16 fittings suitable for matching threaded components. What are the exact external dimensions of the part? The external footprint is 26 x 40 mm, which helps when planning tight assemblies and ensuring clearance for adjacent parts. How heavy is the coupling and why does that matter? The unit weighs 0.128 kg; the low mass aids manual handling and reduces additional inertia in moving assemblies, improving overall machine dynamics. What identifiers are available for ordering and traceability? Order and identify the part by SKU 2615M or GTIN 4061905092602; the part is supplied under the Vertex brand. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
270mm Self-Centering Extra-Flat Three-Point 3-Jaw Turning Chuck, 2250 kgf Clamping Force - Vertex
Take advantage of the combination of self-centring performance, extra-flat profile and high clamping force for secure, repeatable turning operations; order the chuck directly via Metav Werkzeuge or consult our technical team for application advice. Vertex VNBK-8 three-jaw self-centring lathe chuck, extra-flat, Ø270 mm The VNBK-8 is a self-centring, extra-flat three-jaw lathe chuck designed for precision turning where reduced overhang and secure clamping are essential. Self-centring three-jaw design for concentricity Extra-flat profile for reduced overhang Ø270 mm nominal diameter 2,250 kgf clamping force for secure hold Steady hold for consistent surface quality The combination of a self-centring jaw system and a defined clamping force ensures stable workholding across repeated cycles. The chuck’s rated 2,250 kgf clamping force provides a measurable basis for process reliability: higher holding power reduces micro-movement during cutting, which in turn improves surface finish and repeatability. For shops focused on throughput, this translates into fewer reworks and more predictable cycle times. The design balances grip and accessibility so that common turning tasks benefit from both security and operational speed. Shorter overhang for stiffer setups and safer machining The extra-flat profile reduces the distance between the workpiece and the spindle face, increasing system stiffness and reducing deflection under load. For medium-sized components the Ø270 mm nominal diameter offers a good compromise between gripping range and compactness, allowing closer tool approach and improved cutting stability. A flatter chuck body also eases clearance for tooling and fixtures, which can be particularly helpful on machines with limited turret or tailstock travel. This mechanical advantage supports tighter tolerances and safer, more efficient set-ups. Practical design that speeds up shop routines Engineered as a three-jaw, self-centring unit, the chuck simplifies centring tasks: jaws move simultaneously to centre the workpiece, shortening set-up time and reducing alignment errors. The unit mass of 20.2 kg contributes to rotational stability without excessive inertial load on the spindle. Constructed to meet workshop demands, the chuck is suitable for repeated mounting and removal while maintaining consistent concentricity. The robust mechanical layout favours everyday use in production and jobbing environments where a balance of precision and practicality is required. Contact Metav Werkzeuge for tailored advice on selecting the right Vertex VNBK-8 configuration for specific turning tasks; call +49 2822 7131930, email info@metav-werkzeuge.com or message via WhatsApp +49 170 2837271 to discuss compatibility and delivery from Emmerich Technical Data Article number: VNBK-8 GTIN: 4061905086052 Manufacturer: Vertex Facts Diameter: 270 mm Weight: 20.2 kg Clamping force: 2,250 kgf Special features Self-centring three-jaw configuration Extra-flat profile SKU: VNBK-8 eClass: 21020401 FAQ What applications is this chuck suited for? The VNBK-8 three-jaw self-centring lathe chuck by Vertex is suited for general turning operations where reduced overhang and secure clamping are required, supporting repeatable machining processes. How much clamping force does the VNBK-8 provide? The VNBK-8 provides a clamping force of 2,250 kgf, giving a clear, measurable indicator of hold-down capability during cutting. Can the chuck be used on standard spindle noses? The VNBK-8 is designed as a back-mounted lathe chuck; mounting compatibility should be confirmed with spindle specifications and Metav Werkzeuge can assist with matching options. How does the extra-flat design benefit machining? An extra-flat profile shortens overhang, improving system stiffness and cutting stability; the Vertex VNBK-8’s flat body helps achieve tighter tolerances and easier tool access. What maintenance is recommended for long-term reliability? Regular cleaning of jaw guides and periodic lubrication of the mechanical components will help maintain concentricity and the secure clamping behaviour of the VNBK-8. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
273mm Hydraulic Chuck 4,800 kgf Clamping Force, 1,800 rpm Accuracy 0.03mm - Vertex
High clamping force and precise runout deliver consistent, vibration‑reduced turning for demanding workshop tasks; the combination of 4800 kgf clamping and 0.03 mm accuracy supports repeatable part quality. Robust construction and a Ø 273 mm face enable stable handling of larger workpieces. Order through Metav Werkzeuge or contact the consultants for specification advice. Clamping chuck VSK-10 — heavy‑duty lathe chuck with 4800 kgf clamping force A Clamping chuck VSK-10 for secure workholding in turning and machining applications, suited to larger, demanding components where repeatability and stability are required Diameter 273 mm Clamping force 4800 kgf Runout accuracy 0.03 mm Max speed 1,800 rpm Stable gripping for heavy workpieces and higher productivity The VSK‑10 is designed to convert its significant clamping force into reliable contact between chuck jaws and the workpiece, reducing slippage and enabling higher metal‑cutting stability. With a large Ø 273 mm face and substantial mass, the chuck supports repeatable set‑ups that shorten rework cycles and improve throughput. The mechanical advantage of the high clamping power is particularly valuable in process chains that demand consistent concentricity and tight tolerances; this results in fewer rejects and more predictable machining times. Precision where concentricity and surface finish matter The specified accuracy of 0.03 mm indicates tight radial runout control, which translates into better concentricity and improved surface finish on turned components. Combined with a rated top speed of 1,800 rpm, the unit suits a range of spindle speeds typical for medium‑ to heavy‑duty lathes. Maintaining low runout reduces vibration and tool wear, so the chuck helps to preserve cutter life and stabilise cycle times — a rational gain for production planning and cost control. Built for workshop reliability and straightforward integration Weighing 26.7 kg, the chuck provides mass that aids rotational stability during cutting while remaining manageable for mounting and maintenance. As a component from Vertex, the design focuses on durability and consistent performance under repetitive industrial use. Metav Werkzeuge’s role as a European quality filter and logistics hub ensures dependable delivery and traceable sourcing, supporting uninterrupted production runs and inventory planning. For robust, repeatable workholding choose Vertex quality — contact Metav Werkzeuge for technical clarification and secure supply from our Emmerich hub. Technical data SKU: VSK-10 GTIN: 4061905087158 Manufacturer: Vertex Facts Diameter: 273 mm Accuracy: 0.03 mm Max speed: 1,800 rpm Clamping force: 4,800 kgf Weight: 26.7 kg ECLASS: 21020590 Special features Product type: Clamping chuck (Spannfutter) Intended use: Heavy‑duty turning workholding Brand: Vertex Image available: VSK-4-main.png FAQ What maximum spindle speed is recommended for this chuck? The VSK‑10 is specified for up to 1,800 rpm, which matches many medium‑ to heavy‑duty turning operations. What clamping force does the chuck provide? The chuck offers a clamping force of 4,800 kgf, providing secure gripping for larger workpieces. What level of runout accuracy can be expected? Runout accuracy is rated at 0.03 mm, supporting close concentricity requirements in turning applications. What is the effective face diameter of the chuck? The working face diameter is 273 mm, suitable for handling bigger components or for applications needing a wide gripping surface. How heavy is the unit and what does that mean for operation? The chuck weighs 26.7 kg; the mass contributes to rotational stability during cutting and helps reduce vibration. Who manufactures the VSK‑10? The VSK‑10 is produced by Vertex and distributed via Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
273mm Three-Point Chuck, 4800 kgf Clamping Force, 1800 rpm, 0.03 Accuracy - Vertex
Take advantage of the 4,800 kgf clamping force and 0.03 mm runout accuracy to secure heavy or precision workpieces with confidence; the robust 273 mm diameter offers broad compatibility for medium-sized turning operations. Order the chuck directly via Metav Werkzeuge or consult Metav’s specialists for application guidance. Vertex VSC-10 three-jaw chuck – Ø273 mm, 4,800 kgf clamping force A three-jaw chuck VSC-10 engineered for secure workholding on lathes and turning centres, combining high clamping power with fine radial accuracy 273 mm nominal diameter 4,800 kgf clamping force 0.03 mm runout accuracy 1,800 rpm maximum speed Secure holding that reduces rework and downtime The combination of 4,800 kgf clamping force and a specified 0.03 mm runout accuracy delivers a stable grip and consistent concentricity, which translates into fewer rejects and less post-process correction. High radial precision means that turning and finishing passes run with predictable results, reducing fixture adjustments and improving first-pass yield. The design intent is to support both robust axial loads and fine-detail machining, making the device suited to demanding turning tasks. Controlled speed for reliable rotation and surface quality Rated for a maximum speed of 1,800 rpm, the chuck is optimised for medium-speed turning where balance between torque and surface finish is required. Operating within the specified speed range helps maintain the declared runout accuracy and prevents thermal or vibrational effects that could compromise tolerances. Clear alignment between rotational capability and mechanical clamping ensures repeatable surface quality and longer tool life on subsequent operations. Practical dimensions to match common workshop setups With a diameter of 273 mm, the chuck offers a versatile footprint for many workshop requirements without occupying excessive spindle real estate. The three-jaw configuration simplifies centring and shortens setup times on symmetrical workpieces, enabling quicker changeovers between batches. Where radial accuracy and robust clamping are priorities, this configuration supports efficient throughput while maintaining machining precision. Industrial consistency and traceable identification Designed as an industrial-grade workholding solution, the chuck is supplied under the Vertex line and identified as VSC-10, enabling straightforward stock management and traceability. The specification set—nominal 273 mm diameter, 4,800 kgf clamping force, 0.03 mm accuracy and 1,800 rpm rating—provides a clear technical basis for process planning and quality control. Documentation including technical drawings supports integration into standard operating procedures and inspection regimes. Choose the Vertex VSC-10 for dependable high-clamping performance and contact Metav Werkzeuge for an expert recommendation tailored to specific turning applications and supply from Emmerich. Technical data Article number: VSC-10 GTIN: 4061905086359 Manufacturer: Vertex Facts Diameter: 273 mm Clamping force: 4,800 kgf Accuracy: 0.03 mm Maximum speed: 1,800 rpm ECLASS: 21020590 Special features Three-jaw configuration High clamping force for axial stability Includes technical drawing and main image FAQ What clamping force does the chuck provide? The Vertex VSC-10 three-jaw chuck specifies a clamping force of 4,800 kgf, suitable for secure holding of medium-sized workpieces. What does 0.03 mm accuracy refer to? The 0.03 mm figure denotes the runout accuracy, indicating the radial deviation expected when the chuck is properly mounted and balanced. Is the chuck suitable for high-speed turning? The chuck has a maximum speed rating of 1,800 rpm, making it appropriate for medium-speed turning operations where balance between torque and finish is required. Which machines is the chuck compatible with? The chuck is intended for use on lathes and turning centres with a matching spindle and mounting; verification of spindle interface is recommended before installation. How is the chuck identified for ordering or inventory? The model is listed as VSC-10 under the Vertex brand and carries GTIN 4061905086359 for clear identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
275mm Machine Vice With Large Opening, Hydraulic Option, 60 kN Clamp Force - Vertex
Benefit from the combination of a 60 kN clamping force and a 0–275 mm opening for secure, repeatable workholding; order the VQC-160H machine vice via Metav Werkzeuge or consult our specialists for application advice. VQC-160H hydraulic machine vice by Vertex — 60 kN clamping force, 0–275 mm opening The VQC-160H is a hydraulic machine vice with a large opening, designed for secure clamping in machining and milling operations. 60 kN clamping force Large 0–275 mm opening Cast-iron construction for rigidity Stable, high-force clamping to improve machining quality The hydraulic vice delivers 60 kN of clamping force, which translates into significantly improved workpiece stability during heavy cutting and finishing operations. Higher clamping force reduces micro-movement and vibration, resulting in better surface finish and tighter tolerances. With a rated accuracy of 0.01 mm, the device supports precision machining tasks where repeatability and dimensional stability are required. Hydraulic actuation provides consistent pressure across repeated cycles, lowering the risk of loosening under load and enabling confident use on demanding components. Large opening and compact footprint increase flexibility A wide opening of 0–275 mm accommodates a broad range of part sizes without the need for multiple fixtures, while the overall dimensions of 170 x 580.5 x 165 mm (L x W x H) and a mass of 66 kg keep the vice compact enough for typical machine tables. The broad jaw span reduces the need for workpiece repositioning, which shortens setup time and minimises production interruptions. The measured footprint and weight also support straightforward mounting and secure clamping on vertical and horizontal machining centres. Robust cast-iron body with optional hydraulic operation for durability Constructed from cast iron, the vice offers excellent damping characteristics and structural rigidity, both of which contribute to consistent machining performance and extended service life. The hydraulic variant ensures repeatable clamping cycles with minimal operator effort, making the solution suitable for automated or high-throughput environments. The combination of material and hydraulic actuation reduces wear on contact surfaces and maintains clamping consistency over long production runs. Integration and workflow benefits for workshop efficiency Designed for machine-tool integration, this vice supports efficient workflow by reducing fixture changeovers and enhancing process reliability. The clear specification and SKU simplify procurement and inventory management, while the heavy-duty design lowers the likelihood of unscheduled downtime. For operations seeking predictable clamping behaviour and fewer setup iterations, the vice is a practical component of a rational machining strategy that emphasises throughput and part quality. Discuss hydraulic clamping options with Metav Werkzeuge and secure tailored advice for integrating the VQC-160H into production — contact Metav Werkzeuge for a customised quotation and technical consultation. Technical data Article number: VQC-160H GTIN: 4061905092671 Manufacturer: Vertex eClass: 21020601 ETIM: EC002173 Facts Clamping force: 60 kN Opening range: 0–275 mm Accuracy: 0.01 mm Dimensions: 170 x 580.5 x 165 mm (L x W x H) Weight: 66 kg Materials & special features Material: cast iron Type: hydraulic Large opening, optional hydraulic actuation SKU: VQC-160H FAQ What clamping force does the vice provide and why does it matter? The VQC-160H provides a clamping force of 60 kN, which improves workpiece stability during heavy cuts and reduces vibration, helping to achieve consistent surface finish and tighter tolerances. Which workpiece sizes can be clamped in this vice? The vice accepts workpieces within a 0–275 mm opening range, making it suitable for a wide spectrum of components without frequent fixture changes. Is the vice suitable for automated machining centres? Yes, the hydraulic variant of the machine vice is designed for repeatable actuation and is readily integrated into automated or semi-automated machining workflows. What material is the vice made from and what are the benefits? The body is made of cast iron, providing excellent damping and rigidity that contribute to stable machining conditions and extended service life. How precise is the clamping and what does the accuracy value indicate? The vice is specified with an accuracy of 0.01 mm, indicating high repeatability in jaw positioning and suitability for precision machining tasks where dimensional consistency is critical. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
27mm Clamping Screw M11 10mm Square For Quick-Change Holder - TECWERK
Take advantage of precise compatibility and straightforward replacement for rapid workshop servicing: the M11 thread and the 10 mm square head provide a secure clamping interface for TECWERK quick‑change holders, while the compact 27 mm length keeps assemblies compact and accessible. Order the required spare via Metav Werkzeuge or consult our specialists for fitment advice. Clamping screw size B M11 L 27 mm, 10 mm square – TECWERK The Clamping screw size B M11 L 27 mm, 10 mm square is a replacement clamping fastener for TECWERK quick‑change holders, designed for turning bars and prism clamping in workshop environments. Replacement part for TECWERK quick‑change holder M11 threaded clamping screw 27 mm overall length with 10 mm square head Secure fit that reduces setup variability The component is specified as a replacement part for TECWERK quick‑change systems and is built to restore original clamping geometry when a worn or damaged fastener is replaced. The M11 thread ensures a standardised engagement with the holder, while the 10 mm square head provides a positive drive for torque transfer without slippage. Restoring correct clamping geometry reduces rework and rejects, so process stability and part repeatability are maintained. Minimise downtime with simple spare‑part logistics Supplied as a single unit, this spare fastener simplifies stock keeping and maintenance planning. Keeping a small inventory of this clamping screw avoids prolonged machine standstills: when a replacement is fitted, the toolholder is returned to service immediately and calibration routines are typically retained. The compact 27 mm overall length keeps the assembly accessible, which speeds up interventions and lowers labour time per replacement. Practical compatibility for turning and prism clamping The design suits quick‑change turning bars and holders that use prism clamping; the four‑sided head is intended for secure manual or keyed tightening and prevents rotation under cutting forces. As a standardised, OEM‑compatible spare for TECWERK holders, the part supports consistent clamping force and helps maintain cutting tool performance. Where tool clamping precision matters, replacing a degraded fastener with an identical specification avoids margin creep and supports predictable machining results. Request the TECWERK replacement clamping screw through Metav Werkzeuge — our Emmerich team will advise on compatibility and delivery and can supply the part directly to the workshop. Technical data Article number: 2000832428NW Manufacturer: TECWERK Product type: Clamping screw Type designation: B Label: Spannschraube Größe=B M11 L.27mm 4-KT.10mm z.Wechselhalter TECWERK UID: 2000832428NW Facts Thread: M11 Overall length: 27 mm Square head: 10 mm Packaging unit: 1 Special features Replacement part to TECWERK quick‑change holder for turning bars and prism clamping Four‑sided head for secure torque transfer Compact length for accessible assembly FAQ Is this clamping screw compatible with TECWERK quick‑change holders? Yes. The clamping screw size B M11 L 27 mm is specified as a replacement part for TECWERK quick‑change holders used with turning bars and prism clamping. What are the key dimensions to check before ordering? The main dimensions are an M11 thread, 27 mm overall length and a 10 mm square head; these values should be checked against the holder specification. Is the part supplied individually or in a set? The item is supplied as a single unit (packaging unit 1) for targeted replacement needs. Can this screw be used for prism clamping applications? Yes. The specification indicates suitability for prism clamping in compatible TECWERK holders. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
27mm Hollow Spindle Stop Adjustable Clamping Range 27mm, Internal Jaw Lock - TECWERK
Benefit from a secure, rear-fit clamping solution that accommodates a 0–27 mm span and locks firmly against the inner wall of the spindle. The combination of reliable expansion jaws and simple axial adjustment with a special key supports repeatable, time-saving set-ups; order directly via Metav Werkzeuge or consult our specialists for application advice. Hollow spindle stop for spindle Ø20–27 mm — TECWERK rear-fit expandable stop The Hollow spindle stop for spindle Ø20–27 mm is a rear-insertable clamping device designed to secure position inside hollow spindles for turning and machining applications. Rear-fit insertion for hollow spindles Adjustable clamping range 0–27 mm Expansion jaws ensure secure seating Quick release and axial adjustment with key Secure clamping for repeatable set-ups The stop provides secure seating by expanding its jaws against the spindle’s inner wall when the clamping screw is tightened. This mechanical expansion creates a positive, frictional hold that reduces axial play and supports repeatable set-ups during machining operations. The design translates to fewer re-adjustments between operations and more consistent component tolerances, which is particularly valuable in production environments where repeatability is critical. Time-saving rear-fit installation and release Installed from the rear of the hollow spindle, the device is tightened and released using a special key, allowing straightforward assembly without the need to access the spindle front. The rear-fit insertion saves set-up time on machines with limited front access and simplifies changeover procedures. When the key is used to loosen the clamping screw, the stop can be moved axially for fine positional adjustment, enabling quick corrections without full disassembly. Flexible clamping range for diverse spindles With an adjustable clamping range of 0–27 mm, the stop suits a variety of hollow spindle inner diameters commonly encountered in light to medium machining tasks. The expandable jaws adapt to the internal bore, delivering stable contact across that span without requiring additional adapters. This flexibility reduces the number of different stops or adapters needed in the tooling inventory, streamlining workshop logistics. Robust operation with intuitive control Operation relies on a simple mechanical principle: turning the clamping screw forces the jaws outward to press against the spindle bore, ensuring a firm hold. This straightforward mechanism is easy to inspect and service, and it avoids complex hydraulic or pneumatic components that would require additional maintenance. The clear cause-and-effect behaviour—tighten for clamping, loosen for release—supports safe, predictable use in production and maintenance contexts. For reliable internal spindle positioning, request the TECWERK hollow spindle stop via Metav Werkzeuge or contact our advisors at Metav Werkzeuge for specification support and compatibility checks: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832501NW Product: Hollow spindle stop Brand: TECWERK Packaging unit: 1 Facts Clamping range: 0–27 mm Special features Inserted from rear into hollow spindle Tightened with a special key, expanding jaws press to inner wall Release and axial length adjustment with key Suitable for spindle diameters 20–27 mm FAQ How is the stop installed in the machine? The stop is inserted from the rear of the hollow spindle and secured by tightening the clamping screw with the supplied special key; this causes the expansion jaws to press against the inner wall for a firm hold. Which spindle diameters are covered by this device? The device accommodates internal spindle diameters within the 0–27 mm range and is therefore suitable for spindles specified as Ø20–27 mm as indicated in the product description. Can the position be adjusted once fitted? Yes. By loosening the clamping screw with the special key, the stop can be released and moved axially to fine-tune the position before re-tightening to lock it in place. Is this device suitable for high-precision set-ups? The expansion-jaw mechanism provides stable, repeatable contact against the spindle bore, which supports precision set-ups where axial stability and repeatability are important. What tool is required to operate the clamping screw? Operation requires the specified special key mentioned in the product details; this key is used both to tighten the jaws for clamping and to loosen them for axial adjustment. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com