Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
2500 N Pneumatic Push‑Rod Clamp Horizontal Foot, Zinc‑Plated Cast Body, 14 mm Piston - Kukamet
Take advantage of a compact, robust clamping unit with reliable pneumatic actuation and high holding capacity to keep production running smoothly. The combination of a zinc‑plated cast body, 2,500 N actuation thrust and 4,000 N holding force supports repeatable clamping in assembly and machining tasks. Order the unit directly via Metav Werkzeuge or ask the consultants for application advice. Kukamet 671 Pneumatic Push‑rod Clamp — pneumatic actuation, horizontal foot mounting The 671 pneumatic push‑rod clamp is a compact clamping device designed for secure, repeatable holding in assembly, fixture and workshop applications, fitted with a horizontal foot for straightforward installation. Pneumatic actuation, 2,500 N force 4,000 N holding force Zinc‑plated cast body Horizontal foot mounting Consistent clamping performance for series production A pneumatic clamping solution offers fast, repeatable strokes that reduce cycle times and increase throughput. The unit delivers 2,500 N of actuation thrust and a 4,000 N holding capacity, values that are relevant when stable part fixation is required during machining or assembly. The specified forces enable reliable restraint of workpieces while pneumatic control allows integration into automated sequences. This results in measurable productivity gains and fewer stoppages caused by loose or shifting parts. Compact installation with flexible mounting options Engineered for confined workspaces, the clamp’s horizontal foot facilitates direct mounting to machine tables, fixtures or jigs without complex adapters. At 1.25 kg, the compact mass minimises additional load on the fixture while maintaining structural rigidity. The small footprint combined with pneumatic actuation supports dense fixture layouts where several clamping units are used in parallel, improving workspace efficiency and simplifying fixture design. Durable construction for workshop environments Corrosion resistance is provided by the zinc‑plated cast body, which ensures long service life even under workshop conditions where coolant, chips and oils are present. The robust casing protects internal components and reduces maintenance intervals. The clamp is designed to withstand the mechanical demands of industrial use; as a result, downtime caused by component degradation is reduced and total cost of ownership is improved. Technical fit and simple integration The clamp uses a piston with a 14 mm diameter, a dimension that influences stroke stability and force transmission. Pneumatic control permits straightforward pressure adjustment and can be paired with the plant’s existing compressed‑air system. The unit is suitable for fixed fixtures and automated workstations where dependable actuation and mechanical holding are required. Where precision fixturing is needed, the described characteristics support predictable behaviour and easy commissioning. Contact Metav Werkzeuge for expert application advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 671-3-Q14 GTIN: 8680731503173 Manufacturer: Kukamet Facts Weight: 1.25 kg Piston diameter: 14 mm Actuation thrust: 2,500 N Holding force: 4,000 N eClass: 21041716 ETIM: EC011973 Special features Material: zinc‑plated with cast body Mounting: horizontal foot Category: Clamping device / Spanner Suitable for integration into pneumatic systems FAQ What applications is this clamp suited for? The clamp is intended for assembly, fixture and light machining tasks; the Kukamet 671 pneumatic push‑rod clamp delivers fast actuation and reliable holding for repetitive production processes. How much force does the clamp produce and hold? Actuation thrust of the unit is 2,500 N and the maximum holding capacity is 4,000 N, values that ensure secure fixation in standard workshop applications. What are the installation requirements for the clamp? The horizontal foot design allows direct attachment to machine tables and fixtures; pneumatic supply and basic mounting hardware are required for commissioning. Is the body corrosion‑resistant? Yes, the clamp features a zinc‑plated cast body which provides enhanced resistance to workshop environments and reduces maintenance frequency. Which piston diameter is used and why does it matter? The piston diameter is 14 mm; this influences stroke stability and force transmission, helping to ensure consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Push Rod Clamp 12 mm Piston Diameter Horizontal Foot Zinc-Plated Cast Body, 3700 N Hold Force - Kukamet
Taking advantage of 2,500 N clamping force and a zinc‑plated cast body, the unit offers dependable fixture performance and long service life; secure the Pushrod clamp directly via Metav Werkzeuge or contact their consultants for tailored advice. Pushrod clamp 536 by Kukamet — 2,500 N clamping force, zinc‑plated cast body The Pushrod clamp 536 is a compact rod clamping unit designed for horizontal mounting in workshop fixtures and jigs, combining compact mass with robust holding characteristics for repetitive production use. 2,500 N maximum clamping force 3,700 N holding capacity Zinc‑plated cast body for durability Horizontal foot for secure mounting Robust clamping for consistent production results The clamping unit delivers a clear technical advantage through its 2,500 N maximum clamping force paired with a 3,700 N holding capacity, ensuring stable fixation during machining and assembly operations. These values describe the active push force and the passive retention the device can provide; the higher holding capacity reduces the risk of workpiece shift under shock loads. The combination of force ratings supports short cycle times and predictable fixture behaviour, which can translate into fewer rejects and more consistent downstream processing. Compact construction that simplifies integration Engineered for easy installation, the clamp features a horizontal foot mounting style and a lightweight construction of 0.59 kg, helping to keep fixture mass low and maintain machine dynamics. The zinc‑plated cast body offers corrosion resistance and mechanical stiffness, reducing deformation under load and extending service intervals. A 12 mm piston diameter and an M8x50 pressure spindle enable fine adjustment of clamp travel and contact pressure, making the component suitable for precise positioning tasks without bulky ancillary parts. Designed for workshop and fixture applications As a dedicated clamping element for jigs and assembly fixtures, the rod clamp provides reliable repeatability and straightforward mechanical operation. The compact profile facilitates use in stacked or multi-point clamping arrangements where space is limited; only minimal additional hardware is required for secure attachment. The robust finish and cast construction support longevity in production environments, while the clear technical specs allow planning for lifecycle and maintenance routines based on measurable performance criteria. Contact Metav Werkzeuge today for expert guidance and to reserve the Pushrod clamp 536 (SKU 536-3-Q12) from stock in Emmerich for immediate fixture upgrades Technical data SKU: 536-3-Q12 GTIN: 8682843521250 eClass: 21041716 ETIM: EC011973 Measured values Maximum clamping force: 2,500 N Holding capacity: 3,700 N Piston diameter: 12 mm Weight: 0.59 kg Materials & features Zinc‑plated with cast body Horizontal foot mounting Pressure spindle: M8x50 Category: Clamps / Spanner FAQ What clamping and holding forces does the unit provide? The Pushrod clamp 536 offers a maximum clamping force of 2,500 N and a holding capacity of 3,700 N, values that support secure fixation in jigs and fixtures. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, allowing the rod clamp to be fastened to plate or fixture bases for stable lateral fixation. What material and finish does the product have? The unit features a zinc‑plated, cast body, giving corrosion resistance and structural rigidity suitable for workshop environments. Which adjustment elements are supplied? The clamp is equipped with a M8x50 pressure spindle and a 12 mm piston diameter, enabling controlled contact pressure and precise clamping travel. What is the item weight and how does that affect fixture design? The clamp weighs 0.59 kg, supporting low overall fixture mass and easier handling during assembly planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Push Rod Clamp 14 mm Piston, Zinc Coated Cast Body, 4000 N Hold Force - Kukamet
Benefit from a robust combination of zinc-plated cast construction, a high holding force of 4,000 N and a compact 0.61 kg mass for reliable, repeatable clamping in production fixtures. Order the pushrod clamp directly via Metav Werkzeuge or ask the consultants for application advice if needed. 532 pushrod clamp by Kukamet — zinc-plated cast body, 4,000 N holding force The 532 pushrod clamp is a compact clamping element designed for industrial fixturing and repetitive assembly tasks, offering a low-mass solution with a horizontal-foot mounting for stable integration. Zinc-plated cast body for industrial durability Holding force up to 4,000 N Compact weight, only 0.61 kg Horizontal-foot mounting for stable installation Consistent clamping for high-throughput processes The clamp delivers a clear separation between actuation and retention: a pressing force of up to 2,500 N provides reliable actuation while the holding force of 4,000 N secures the workpiece during machining or assembly. The device uses an M8x50 pressure spindle together with a 14 mm piston, which translates limited operator movement into steady clamping pressure. This mechanical ratio reduces cycle-time variability and supports repeatable positioning on automated jigs, improving process stability and lowering rejection rates. The design rationale is focused on long-term productivity gains through dependable mechanical performance. Integrates easily into fixtures and jigs A horizontal-foot mounting simplifies installation on plates and modular fixture systems, allowing the clamp to be fastened flush and aligned with existing tooling. At 0.61 kg, the unit is deliberately lightweight, which reduces added inertia on moving assemblies and supports compact fixture design. The compact footprint and standardised spindle thread make retrofitting straightforward in both manual and semi-automated lines. These attributes increase layout flexibility and help maintain short set-up times, which contributes to a smoother production flow and reduced machine downtime. Built to last with low maintenance needs Constructed from a zinc-plated finish and a cast body, the clamp resists corrosion and mechanical wear common in workshop environments. The robust materials and simple mechanical actuation ensure low maintenance frequency and straightforward service when required. The 14 mm piston diameter and the solid mounting arrangement contribute to long contact life, making the component suited to repetitive clamping cycles. This durability reduces the total cost of ownership by decreasing replacement intervals and preserving fixture accuracy over time. Contact Metav Werkzeuge to discuss the 532 pushrod clamp for your fixtures, request application advice and arrange assured delivery from Emmerich. Technical Data Article number: 532-3-Q14 Manufacturer: Kukamet GTIN: 8680731504453 ECLASS: 21041716 ETIM: EC011973 Facts Holding force: 4,000 N Max pressing force: 2,500 N Piston diameter: 14 mm Weight: 0.61 kg Pressure spindle: M8x50 Special features Material: zinc-plated with cast body Mounting: horizontal foot Design: lever clamp style FAQ What is the difference between holding force and pressing force? The holding force refers to the clamp’s ability to keep a workpiece secured (4,000 N), while the pressing force (2,500 N) indicates the actuation power delivered by the spindle; the 532 pushrod clamp uses the pressing action to achieve the higher holding result. Can this clamp be used in automated fixture systems? Yes, the combination of an M8x50 pressure spindle, compact mass and horizontal-foot mounting makes the 532 suitable for integration into semi-automated and automated jigs and fixtures. Which mounting method is required for installation? A horizontal-foot mounting is specified for stable fastening; the clamp is designed to be bolted directly to plates or fixture modules. How does the zinc-plated cast body help in workshop environments? The zinc-plated surface and cast construction protect against corrosion and wear, extending service life in industrial conditions. What are the essential dimensions to consider for layout planning? Key dimensions include the 14 mm piston diameter and the M8x50 pressure spindle thread; weight and mounting type should also be factored into fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Push Rod Clamp Horizontal Foot Zinc-Plated, 2640 N Holding Force - Kukamet
Take advantage of a compact, robust clamping solution that combines a galvanised finish, a 2,500 N maximum clamping capacity and a practical horizontal-foot design for stable fixture integration; order through Metav Werkzeuge or request tailored advice from our consultants for specification matching. Rod clamp 511 — horizontal-foot clamp, galvanised finish by Kukamet The Rod clamp 511 is a compact horizontal-foot clamping element designed for secure holding in assembly jigs and fixture setups where space and reliable repeatability matter most. Galvanised corrosion protection Max clamping force 2,500 N Horizontal foot for stable mounting Compact weight 0.49 kg Secure force and clear technical performance for reliable fixtures The 511 combines a defined maximum clamping force of 2,500 N with a holding force of 2,640 N, making it suited to repetitive operations where consistent pressure is required. The clamping element includes a pressure spindle sized M8 x 50, which allows fine adjustment of contact pressure and straightforward integration into existing jigs. The galvanised surface treatment resists corrosion in workshop environments and reduces the need for frequent replacement, while the modest mass (0.49 kg) keeps moving masses low and contributes to safer, predictable fixture dynamics. These measurable parameters provide a clear basis for fixture design decisions and support effective process planning. Fast integration and durable operation to keep production moving Fitted with a horizontal foot, the clamp mounts directly to flat surfaces for a low-profile installation that saves vertical space and preserves access to the workpiece. The geometry supports stable mounting and reduces vibration transfer during clamping cycles. The simple design avoids complicated maintenance: lubricate the moving parts periodically and check the spindle engagement; the galvanised finish reduces corrosion-related wear. Because adjustment is made via a standard spindle thread, replacement parts and adjustments follow conventional workshop practice, shortening downtime and simplifying stock keeping for spares. Practical applications and confidence in everyday use This clamp is engineered for assembly, welding jigs, small-batch fixtures and maintenance work where reliable holding and repeatable positioning are required. The robust construction ensures repeatability and a long service life, while the compact form factor allows use in confined fixture arrangements. Buyers benefit from the product’s transparent technical attributes when planning tooling layouts: quantified forces, standard spindle dimensions and a mounting style that is easy to model into CAD assemblies. If further data is required for integration, Metav’s technical team can assist with drawings and compatibility checks to support a smooth installation. Contact Metav Werkzeuge for a precise recommendation on the Kukamet rod clamp 511 or to request technical drawings and application advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 511-3 GTIN: 8680731502626 Manufacturer: Kukamet Core measurements Max clamping force: 2,500 N Holding force: 2,640 N Weight: 0.49 kg Pressure spindle: M8 x 50 mm eClass: 21041716 ETIM: EC011973 Features and materials Galvanised finish Horizontal foot mounting No special additional features indicated Category: Spanner FAQ What maximum clamping force does the clamp provide? The rod clamp 511 delivers a maximum clamping force of 2,500 N and a holding force of 2,640 N for secure fixture use. How is the clamp mounted to a fixture? Mounting is via the horizontal foot; the clamp 511 is designed for bolting to flat surfaces to provide a low-profile, stable attachment in jigs and fixtures. Which spindle is used for pressure adjustment? Adjustment is performed with the pressure spindle specified as M8 x 50, allowing precise contact pressure control and easy replacement with standard hardware. Is the surface treated against corrosion? Yes, the clamp is supplied with a galvanised finish that improves resistance to corrosion in workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Holding / 2000N Clamping Vertical Clamp With Safety Lock, Stainless Steel - Kukamet
Reliable clamping with a compact footprint and a secure safety lock supports consistent production flow; stainless steel construction and robust holding capability from 2,500 N ensure long-term stability. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 — Kukamet vertical clamp with safety lock, stainless steel Vertical clamp 212 combines corrosion-resistant construction and a safety latch for reliable workholding in jigs, fixtures and repetitive workshop tasks. Stainless steel construction Safety lock for secure clamping Max holding force 2,500 N Vertical-foot mounting Reliable force for repeatable clamping cycles The clamp delivers a clearly defined 2,000 N clamping force with a 2,500 N holding capacity, ensuring consistent performance across repeated cycles. Such predictable figures reduce setup variability and help maintain process quality on production lines. The lever-style actuation provides quick engagement and release, which shortens cycle times and improves throughput for repetitive tasks. The mechanical design focuses on efficiency and measurable results, supporting rational purchasing decisions for process stability. Corrosion resistance for workshop and light industrial use Constructed from stainless steel, this workholding device resists moisture and workshop contaminants, extending service life and reducing maintenance frequency. A corrosion-resistant body means less downtime for part replacement and a lower total cost of ownership over time. The material choice also suits applications where cleanliness is important or where components are exposed to oil and cutting fluids. The robust finish supports dependable function in demanding environments. Space-saving mounting with precise pressure control The vertical foot mount keeps the footprint small and simplifies integration into existing fixtures and tooling plates. The integrated M8x50 pressure spindle allows fine adjustment of contact pressure and reach, enabling accurate alignment and secure grip without additional adapters. At just 0.415 kg, the unit is light enough for compact assemblies yet rigid enough to maintain clamping accuracy. These attributes make the clamp suitable for confined setups where space economy and reliable contact are priorities. Built-in safety and straightforward compatibility A mechanical safety lock secures the clamping position once engaged, preventing accidental release during handling or vibration. The design is lever-operated and does not include a swing arm, which simplifies fitting into custom fixtures. Classification codes such as ECLASS 21041717 and ETIM EC011973 facilitate procurement and cataloguing in industry systems. The combination of safety features and standardised identifiers supports compliance and easier parts management on the shop floor. For precise delivery information, technical clarification or to request a tailored quotation for the Kukamet vertical clamp 212 (SKU S212-3-L), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S212-3-L GTIN: 8680731509236 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 0.415 kg Max clamping force: 2,000 N Max holding force: 2,500 N Pressure spindle: M8x50 Special features Material: stainless steel Mounting: vertical foot Safety lock included No arm (not applicable) Lever-type clamp FAQ Is the clamp suitable for corrosive environments? Yes. The Kukamet vertical clamp 212 is made from stainless steel, offering corrosion resistance suitable for workshop and light industrial settings (SKU S212-3-L). What are the clamping and holding forces? The device provides a clamping force of 2,000 N and a holding force of 2,500 N, values that support secure workholding in repetitive operations. How is the clamp mounted and adjusted? Mounting is via a vertical foot; adjustment is possible with the M8x50 pressure spindle supplied with the clamp. Does the clamp include a safety feature to prevent accidental release? Yes. A mechanical safety lock secures the clamp in its engaged position to reduce the risk of unintended opening. Can this clamp be used with a swing arm or is it fixed? This model is designed with a vertical-foot mounting and does not include a swing arm; it is intended for fixed installations and fixture plates. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Holding Force 2000N Clamping Force Vertical Clamp With Safety Lock, Galvanised - Kukamet
Reliable production benefits from the combination of galvanised construction, a safety lock and a 2.5 kN holding capacity, ensuring consistent clamping performance and low maintenance. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants for application advice and stock availability. Kukamet 212 Vertical Clamp — Safety Lock, 2.5 kN Holding Force The 212 vertical clamp is a compact lever clamp for upright mounting, engineered to secure components in fixtures and jigs for general workshop and production use. Safety lock for secure clamping Vertical base for upright mounting Galvanised steel construction Holding force 2.5 kN, clamping force 2.0 kN Consistent clamping power that speeds up workflows The vertical lever device delivers predictable results through a clear separation of functions: a 2.0 kN clamping force for workpiece engagement and a 2.5 kN holding force for retention. The built-in safety lock prevents accidental release during processing, reducing stoppages and rework. The adjustable spindle (M8x50) allows fine correction of clamp travel, ensuring repeatable positioning without complex setup. This combination supports higher throughput and reduces cycle-time variability in repetitive tasks. Durable, low-maintenance construction for long service life Constructed from galvanised steel, the clamp resists corrosion and maintains surface integrity in workshop environments. The lightweight body (approx. 0.415 kg) minimises added mass on fixtures while preserving structural stability, making it suitable for modular jigs and transportable setups. Galvanisation extends service intervals and lowers total cost of ownership, since routine maintenance is limited to occasional lubrication and inspection of the locking mechanism. Simple integration into fixtures and machines The clamp’s vertical base is designed for upright mounting on tooling plates and frames, saving horizontal space and aligning the clamping force with gravity for secure hold-down. The M8x50 contact spindle provides a standard interface for many fixtures; it can be exchanged or adjusted to suit varying workpiece heights. The compact footprint and standardised connections make this lever clamp an effective solution for automated assembly stations as well as manual workbenches. Operator safety and process reliability combined A mechanical interlock with visible engagement ensures the clamp remains locked under load, improving safety for operators and downstream processes. The straightforward mechanism reduces potential failure modes compared with more complex pneumatic systems, and the galvanised finish protects moving parts against early wear. For manufacturers seeking dependable manual or semi-automatic clamping, this lever clamp delivers a balance of safety, repeatability and easy inspection. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 212 vertical clamp into production fixtures or for immediate supply from our Emmerich warehouse Technical data Article number: 212-3-L GTIN: 8680731501650 Manufacturer: Kukamet SKU: 212-3-L Facts Weight: 0.415 kg Holding force: 2500 N (2.5 kN) Clamping force: 2000 N (2.0 kN) Contact spindle: M8x50 ECLASS: 21041717 ETIM: EC011973 Special features Material: galvanised steel Mounting: vertical base (upright foot) Safety lock: yes Application: lever clamp for fixtures and jigs FAQ How much clamping and holding force does the clamp provide? The Kukamet 212 vertical clamp offers a clamping force of 2.0 kN and a holding force of 2.5 kN, suitable for light to medium-duty fixture applications. Is the spindle adjustable or replaceable? Yes, the contact spindle is M8x50, allowing adjustment for workpiece height and replacement with compatible M8 parts. Can this clamp be used in corrosive workshop environments? The galvanised steel construction of the 212 provides enhanced corrosion resistance for standard workshop conditions and reduces the need for frequent surface maintenance. What mounting method is required for installation? The clamp is designed for upright mounting on a vertical base; the vertical foot simplifies integration into plates and frames used in fixtures. Does the clamp include a safety feature to prevent accidental release? The device is fitted with a safety lock that secures the lever in the clamped position to prevent unintended opening during machining or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Horizontal Clamp With Hook, 41mm Thread Length, Black Oxide Finish - Kukamet
Take advantage of the combination of secure holding force, a compact horizontal mounting, and a corrosion-resistant finish for reliable part retention and fast cycle times. Order the toggle latch clamp directly via Metav Werkzeuge or ask our consultants for application support. Toggle latch clamp 411 by Kukamet — horizontal base, hook-equipped, blackened finish Toggle latch clamp 411 is a lever-operated closure clamp designed for stable fixture mounting and dependable retention in production and assembly applications. Horizontal base for stable mounting Holding force up to 2,500 N Closing force 2,000 N Blackened finish resists corrosion Precise, measurable clamping for repeatable processes The Toggle latch clamp 411 delivers defined mechanical performance that supports reproducible set-ups on jigs and fixtures. With a holding force of up to 2,500 N and a closing force of 2,000 N, the device ensures workpieces remain secure during machining, assembly or transport operations. The clearly specified forces allow planners to calculate safety margins and fixture designs with confidence, reducing rework and downtime through predictable behaviour. Compact mounting that speeds up integration Fitted with a horizontal base, the clamp offers a compact footprint that simplifies installation on flat fixture plates and rails. The integrated hook ensures quick engagement and a positive lock without complex alignment steps. This design shortens setup times and lowers cycle variability, which improves overall throughput. The low mass (0.325 kg) contributes to reduced load on moving fixtures while maintaining robust performance. Durable finish and material choice for workshop environments The blackened finish provides an economical layer of surface protection that helps resist corrosion in standard workshop atmospheres and keeps the clamp looking uniform over repeated use. Combined with its solid lever mechanism, the latch is engineered for regular operation with low maintenance requirements. The result is a pragmatic, long-lived clamping solution that supports continuous production without unnecessary complexity. Contact Metav Werkzeuge for tailored technical advice on Kukamet toggle latch clamps and reliable supply; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: B411-3 GTIN: 8680731508611 ECLASS: 21041718 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 0.325 kg Closing force: 2,000 N Holding force: 2,500 N Thread length: 41 mm Special features Horizontal base mounting Hook-equipped latch Blackened finish Category: Clamps / Toggle latch FAQ What load capacities can be expected from this clamp? The Kukamet toggle latch clamp 411 offers a closing force of 2,000 N and a holding force up to 2,500 N, values intended for planning secure retention in fixtures and transport applications. How is the clamp mounted to a fixture plate? Mounting uses the horizontal base, allowing the clamp to be fastened directly to flat plates or rails; the compact base supports simple integration into existing jig layouts. Is the finish suitable for industrial workshops? The blackened finish provides corrosion resistance appropriate for typical workshop conditions and helps maintain consistent surface appearance over repeated use. Does the clamp include a hook or striker? Yes, the model is delivered with an integrated hook for immediate engagement and positive locking during operation. Which applications suit this latch clamp best? The device is suited to assembly, small-series production and transport securing where a compact, repeatable clamping action with defined forces is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pneumatic Pushrod Clamp 14mm Piston, 3200N Holding Force, Zinc-Plated - Kukamet
Take advantage of a compact, mechanically robust clamp that combines pneumatic actuation with a high holding force, ensuring repeatable clamping cycles and stable fixture performance on the shop floor. Order the clamp via Metav Werkzeuge or consult their specialists for integration advice. Pneumatic Push‑rod Clamp 621 – Kukamet | 2.5 kN thrust, horizontal foot The Pneumatic Push‑rod Clamp 621 is a compact pneumatic clamp designed for industrial jigs and fixtures where consistent linear thrust and secure holding are required. Robust galvanised construction Maximum thrust 2,500 N Holding force up to 3,200 N Consistent linear force for automated clamping The 621 delivers a dependable thrust of 2,500 N and a holding force of 3,200 N, values that support repeatable clamping in short-cycle production and machining setups. Pneumatic actuation converts compressed-air pressure into a straight push motion via a piston Ø 14 mm, providing precise linear displacement with minimal mechanical backlash. For procurement and process planning, these figures translate into predictable clamp behaviour during pick-and-place operations, transfer systems and stationary fixtures, reducing rejects caused by inconsistent clamping. Space-saving mounting and corrosion resistance Thanks to the horizontal foot mounting the unit installs neatly on fixture plates or machine beds without extending the assembly height. The galvanised finish offers basic corrosion protection suitable for industrial environments, while the clamp’s compact mass of 1.31 kg keeps added inertia low on moving sub‑assemblies. Together, these attributes enable denser fixture layouts and easier retrofitting of existing tooling, improving floor-space efficiency and simplifying mechanical integration. Low-maintenance reliability for continuous use Engineered for industrial use, the clamp’s simple pneumatic mechanism limits wear points and facilitates straightforward maintenance routines. The galvanised components reduce the frequency of surface corrosion checks, and the linear push‑rod concept avoids complex linkages, lowering lifecycle service effort. In practice, this means fewer unscheduled stops and a clearer maintenance schedule, supporting higher equipment availability and predictable production throughput. Identification and procurement made practical The clamp is listed under SKU 621-3-Q14 and GTIN 8680731502954, with classification codes ECLASS 21041716 and ETIM EC011973, which helps in ERP ordering and parts management. The technical numbers — 2,500 N thrust, 3,200 N holding force, piston Ø 14 mm, and weight 1.31 kg — allow engineers and buyers to verify compatibility with pneumatic supply, valve sizing and fixture load requirements before procurement. The clear identification streamlines spare-parts logistics and supports traceable purchasing for long-term asset management. For reliable, repeatable clamping solutions based on Kukamet technology, contact Metav Werkzeuge to discuss the Pneumatic Push‑rod Clamp 621 and suitability for specific fixtures or automated cells. Technical data Article number: 621-3-Q14 GTIN: 8680731502954 Manufacturer: Kukamet ECLASS: 21041716 ETIM: EC011973 Facts Maximum thrust: 2,500 N Maximum holding force: 3,200 N Piston diameter: 14 mm Weight: 1.31 kg Special features Galvanised finish Horizontal foot mounting Compact design for fixture integration FAQ What clamping force does the Pneumatic Push‑rod Clamp 621 provide? The Pneumatic Push‑rod Clamp 621 offers a maximum thrust of 2,500 N and a holding force of 3,200 N suitable for many industrial fixture applications. What mounting style does the clamp use and how does it save space? The clamp features a horizontal foot mounting that enables low-profile attachment to plates and machine beds, optimising fixture density and reducing overall assembly height. Which material resists corrosion on this clamp? The clamp is finished galvanised, providing basic corrosion resistance appropriate for general industrial environments. What are the key procurement identifiers for this clamp? Relevant identifiers include SKU 621-3-Q14, GTIN 8680731502954, ECLASS 21041716 and ETIM EC011973 to assist in ERP systems and spare-parts management. Is the clamp suitable for automated production cycles? Yes, the pneumatic linear actuation and compact design make the clamp well suited to repeated, short-cycle clamping in automated cells and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pneumatic Pushrod Clamp Horizontal Base, 14mm Piston Dia, 3200N Hold Force, Zinc Plated - Kukamet
Take advantage of the combination of high clamping and holding forces, compact construction and corrosion-resistant zinc plating for reliable fixture performance. Order the Pneumatic push-rod clamp 662 directly via Metav Werkzeuge or contact the advisors for application-specific guidance. Pneumatic push-rod clamp 662 — 2.5 kN clamping force, zinc-plated A 662 pneumatic push-rod clamp designed for secure, repeatable workholding in industrial fixturing and assembly applications 2.5 kN pneumatic clamping force 3.2 kN holding force for secure fixturing Zinc-plated corrosion-resistant finish Faster, more consistent clamping for productive workflows The pneumatic push-rod clamp delivers a clamping force of 2,500 N combined with a holding force of 3,200 N, ensuring consistent contact pressure during machining and assembly. The compact actuator, driven by a 14 mm piston, provides fast response times and repeatable strokes for short-cycle production. This results in reduced setup time, fewer rejected parts and more predictable process capability. The zinc-plated surface adds an element of corrosion resistance that helps maintain clamp performance over repetitive cycles, reducing the frequency of component replacement and downtime. Reliable construction that supports continuous operation Constructed with a sturdy mounting arrangement and an integrated horizontal foot, the clamp provides a low-profile footprint that is simple to fit into existing fixtures. With a net weight of approximately 1.026 kg, the component balances robustness and ease of handling during installation. The combination of compact dimensions and proven actuator technology supports long-term stability under industrial loads, making the clamp well suited to repetitive operations where secure workholding is essential. If additional technical details are required for integration, Metav’s technical consultants can be consulted for specification matching. Easy integration into clamping systems and diverse applications The design prioritises straightforward mounting and dependable force transmission, enabling secure fixturing for a variety of materials and operations. The clamp’s horizontal mounting and compact piston allow integration in machining, assembly and testing jigs where space is limited but reliable restraint is critical. Clear, measurable performance values—2,500 N clamping and 3,200 N holding—support objective selection during planning and help justify fixture choices within production engineering specifications. The robust finish and compact mass make the component suitable for series production environments that demand durability and repeatable results. For secure, high-force pneumatic clamping choose the Kukamet 662 via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and order handling Technical data Article number: 662-3-Q14 GTIN: 8682843521694 Manufacturer: Kukamet Material: Zinc-plated Mounting: Horizontal foot Core specifications Clamping force: 2,500 N Holding force: 3,200 N Piston diameter: 14 mm Weight: 1.026 kg eClass: 21041716 ETIM: EC011973 Additional features Category: Clamps SKU: 662-3-Q14 Asset: product image and catalogue sheet available FAQ What clamping and holding forces does the clamp provide? The Kukamet pneumatic push-rod clamp 662 provides a clamping force of 2,500 N and a holding force of 3,200 N. Which piston diameter is used in this actuator? The actuator uses a 14 mm piston; this compact diameter enables quick actuation and repeatable strokes in confined fixtures. Is the clamp suitable for corrosive workshop environments? The clamp has a zinc-plated finish for enhanced corrosion resistance, suitable for standard workshop conditions and environments where surface protection is beneficial. How is the clamp mounted in a fixture? The clamp features a horizontal foot for secure mounting; the low-profile arrangement supports integration into machining and assembly jigs. Which SKU should be referenced when ordering or enquiring? Reference SKU 662-3-Q14 when ordering or requesting technical details for the Kukamet pneumatic push-rod clamp Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pneumatic Push‑Rod Clamping Cylinder 14mm Piston, 4000N Hold Force, Zinc Plated Cast Body - Kukamet
The compact design and robust construction deliver reliable, repeatable clamping with 2,500 N clamping force and a galvanised cast body, ensuring long service life in production fixtures; order the pneumatic push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic push-rod clamp 641 by Kukamet — 2,500 N clamping force, horizontal foot mounting Pneumatic push-rod clamp 641 is a compact industrial clamp for fast, repeatable clamping in jigs and fixtures, suited to automated and semi-automated production environments. 2,500 N clamping force 4,000 N holding capacity Galvanised cast body Horizontal foot mounting Reliable force and predictable performance for series production Engineered for consistent operation, this clamp provides 2,500 N clamping force with a 4,000 N holding capacity, allowing stable fixture retention during machining and assembly. The combination of a piston Ø 14 mm and a compact actuator stroke translates into fast cycle times and reduced fixture downtime. The device’s specification emphasises measurable performance: cycle consistency reduces part rework and contributes directly to higher throughput. Where process reproducibility is a priority, the mechanical design supports integration into pneumatic circuits, making the unit suitable for both manual and automated clamping stations. Engineers benefit from clear, numeric performance data when designing clamping layouts. Durable construction for workshop and light industrial use A galvanised cast body provides corrosion resistance and structural stiffness, while the total weight of 1.55 kg keeps the component compact for space-constrained fixtures. The surface finish protects the housing in humid or industrial environments, and the cast construction resists deformation under repeated load. This durability minimises maintenance intervals and supports predictable life-cycle costs. When compared with lighter-sheet designs, the solid cast body reduces the risk of bend or misalignment under lateral loads, preserving tool contact geometry and part quality over extended production runs. Practical mounting and low-maintenance operation Fitted with a horizontal foot mounting, the clamp is straightforward to attach to plates and fixtures, enabling standardised placement and easy replacement in modular tooling systems. Pneumatic operation keeps moving parts simple and serviceable; routine maintenance is limited to standard pneumatic checks and occasional lubrication where specified. The clamp’s straightforward mechanics reduce the need for specialised service skills, which is advantageous for shops seeking dependable performance with minimal downtime. For complex installations or bespoke fixture concepts, Metav Werkzeuge’s technical advisors can provide integration advice and parts matching. For ordering, integration advice or to discuss Kukamet clamp variants, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com — request the 641 series via Metav Werkzeuge for dependable supply and expert guidance. Technical Data Article number: 641-3-Q14 SKU: 641-3-Q14 GTIN: 8680731503043 Manufacturer: Kukamet Facts Clamping force (max): 2,500 N Holding capacity (max): 4,000 N Piston diameter: 14 mm Weight: 1.55 kg ECLASS: 21041716 ETIM: EC011973 Special features Material: galvanised with cast body Mounting: horizontal foot Category: clamps Asset: catalogue PDF and image available FAQ What clamping and holding forces does this clamp provide? The pneumatic push-rod clamp 641 from Kukamet offers a maximum clamping force of 2,500 N and a holding capacity of 4,000 N, giving a clear performance envelope for fixture design. Is the clamp suitable for automated production lines? Yes, the 641 is designed for integration into pneumatic circuits and automated fixtures; its repeatable actuation suits cyclical production and indexed stations. What materials and environments is the clamp designed for? The clamp features a galvanised cast body, making it appropriate for workshop and light industrial environments where corrosion resistance and structural rigidity are required. How is the clamp mounted in a fixture? The unit uses a horizontal foot mounting, allowing secure attachment to base plates and modular fixture systems; the mounting type simplifies replacement and standardisation. What routine maintenance is required? Maintenance is limited to standard pneumatic system checks and recommended lubrication points; the solid construction reduces the frequency of mechanical service. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Push Rod Clamp 14mm Piston Dia, Horizontal Foot, Zinc-Plated Cast Body, 4000N Holding Force - Kukamet
Take advantage of the combination of 4,000 N holding force, a zinc‑plated cast body and a compact 0.61 kg mass for dependable clamping in jigs and fixtures; order the 536 push‑rod clamp directly via Metav Werkzeuge or consult our specialists for integration advice. 536 Push‑rod Clamp »536-3-Q14« – Horizontal base, 4,000 N holding force (Kukamet) The 536 push‑rod clamp delivers compact, high‑force clamping for production fixtures and workshop jigs, mounted via a horizontal base for stable positioning. 4,000 N maximum holding force 2,500 N maximum pressing force Zinc‑plated cast body for corrosion resistance Horizontal base mounting for stable installation M8×50 pressure spindle included Consistent high clamping performance for production use The clamp offers a maximum holding force of 4,000 N and a maximum pressing force of 2,500 N, making it suitable for repetitive fixture operations where precision retention is essential. These figures denote the device’s capability to maintain component position under load and to apply a reliable press action during assembly or machining. The combination of measurable force ratings and a defined piston diameter of 14 mm supports process planning and simplifies cycle time calculations, helping engineers specify the right clamp for medium‑duty applications without over‑engineering fixtures. Space‑saving design that eases fixture layout Weighing only 0.61 kg, the clamp brings high force density to confined clamp stations and multi‑point fixture arrays. The compact footprint afforded by the horizontal base means fewer clashes with adjacent tooling and easier routing of jig components. For fixture designers, the reduced mass lowers inertial loads during automated handling, while the clear mechanical design aids repeatable placement and quick retrofitting into existing plates. The clamp’s geometry supports tight packing of multiple clamps where several datum points are required. Durable construction and straightforward mounting Constructed with a zinc‑plated cast body, the unit resists corrosion in workshop environments while retaining the rigidity required for secure clamping. The horizontal base mounting simplifies installation on plates or beam fixtures and is compatible with standard shop drilling patterns. An included M8×50 pressure spindle allows fine adjustment of the contact point and clash compensation on uneven workpieces. All mechanical connections are designed for industrial use, enabling predictable life cycles and reduced maintenance intervals compared with lightweight alternatives. Practical applications and safe operation guidance This clamp is intended for jigs, assembly fixtures and light machining fixtures where repeatable holding is required. Typical uses include positioning small components for drilling, tapping and inspection without loss of datum. Safe operation is supported by the defined force values and fixed mounting; nevertheless, correct fixture design and regular inspection of the spindle and mountings are recommended to maintain performance and avoid unintended loosening. The robust construction also makes the clamp suitable for serial production environments where tool reliability reduces downtime. Contact Metav Werkzeuge today to specify the Kukamet 536 push‑rod clamp for fixture projects; the Emmerich team will advise on integration and supply the SKU 536-3-Q14 directly Technical data SKU: 536-3-Q14 GTIN: 8682843521267 Manufacturer: Kukamet Numeric data Weight: 0.61 kg Maximum holding force: 4,000 N Maximum pressing force: 2,500 N Piston diameter: 14 mm Materials & features Zinc‑plated with cast body Horizontal base mounting Pressure spindle M8×50 ECLASS: 21041716 ETIM: EC011973 FAQ What maximum holding and pressing forces does the clamp provide? The Kukamet 536 push‑rod clamp provides a maximum holding force of 4,000 N and a maximum pressing force of 2,500 N, suitable for medium‑duty fixture tasks. How is the clamp mounted in a fixture? Mounting is via the horizontal base; the clamp is secured to fixture plates or beams, enabling stable installation for jigs and assembly fixtures. What materials and surface finish does the clamp have? The clamp features a zinc‑plated cast body, combining rigidity with corrosion resistance for workshop environments. Is an adjustable spindle included and what size is it? Yes; the unit includes an M8×50 pressure spindle to allow precise contact adjustment and compensation for workpiece variances. Which applications are most suitable for this clamp? Best suited for jigs, assembly fixtures and light machining fixtures where repeatable holding and compact installation are required; the clamp’s defined force ratings support predictable fixture performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Push Rod Clamp Vertical Base, Zinc Plated, Holding Force 2640N - Kukamet
Take advantage of a compact, galvanised clamp that delivers reliable holding with a 2,500 N rated clamping force and a 2,640 N holding force, keeping components secure in repetitive production. Order the Kukamet 512 push‑rod clamp directly via Metav Werkzeuge or consult our specialists for fixture integration and supply solutions. Kukamet 512 Push‑rod Clamp — galvanised, 2.5 kN clamping force A robust 512 push‑rod clamp engineered for fixture workholding, offering vertical‑foot mounting for stable installation in jigs and assembly fixtures. Galvanised finish for corrosion resistance Clamping force up to 2,500 N Holding force rated 2,640 N Vertical-foot mounting with M8x50 spindle Secure holding for repetitive production cycles The galvanised construction provides long‑term corrosion protection while the nominal clamping force of 2,500 N ensures workpieces remain immobile during machining or assembly. This robustness reduces rework and scrap by keeping tolerances stable throughout series production. The combination of a strong applied force and a rated holding force of 2,640 N creates a safety margin that is relevant where vibration or intermittent loads occur, supporting consistent process quality and fewer stoppages. Simple integration into existing fixtures Mounting is straightforward thanks to the vertical-foot design and the M8x50 spindle, which facilitates secure attachment to fixture plates and jigs. The compact geometry allows the clamp to be positioned close to the workpiece without obstructing tools or operators, promoting efficient setup. Where quick interchangeability and repeatable positioning are required, the clamp’s form factor streamlines retrofit into modular systems and reduces setup times at the start of each production run. Low mass, high durability for daily workshop use At 0.49 kg, the unit imposes minimal additional load on moving fixtures and contributes little to cycle inertia, while the zinc plating withstands workshop environments. Mechanical simplicity means fewer wear parts and straightforward preventative maintenance: periodic inspection and lubrication preserve clamping performance. The galvanised finish plus solid mechanical design make this solution suited to profiled jigs, light assembly lines and repetitive clamping tasks where uptime matters. Fit for diverse metalworking and assembly tasks Designed for general clamping technology applications, the clamp performs well in small‑batch manufacturing, prototyping and production testing. Its specification supports use with steel and aluminium components in milling, drilling and fitting operations. The robust specification and compact dimensions place it as a pragmatic choice for workshops seeking a reliable lever‑style clamping element that balances performance with ease of handling and integration. Discuss mounting options and availability with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and dependable supply from Emmerich Technical data Article number: 512-3 GTIN: 8680731502671 Manufacturer: Kukamet Facts Weight: 0.49 kg Clamping force (max): 2,500 N Holding force (max): 2,640 N Spindle: M8x50 Special features Material: galvanised steel Mounting: vertical foot Type: push‑rod / lever clamp Category: Spanner eClass: 21041716 ETIM: EC011973 FAQ What is the main application of the 512 push‑rod clamp? The 512 push‑rod clamp is intended for fixture and workholding tasks in assembly and machining, delivering secure clamping where repeatability is required. How is the 512 push‑rod clamp mounted to a jig plate? Mounting uses the vertical‑foot arrangement and the M8x50 spindle; the design suits direct bolting to fixture plates or dedicated mounting pads. Does the galvanised finish protect against workshop corrosion? Yes, the galvanised surface on the 512 push‑rod clamp provides enhanced resistance to rust and common workshop contaminants. What is the difference between clamping force and holding force for this clamp? Clamping force (2,500 N) is the applied force when engaging the clamp; holding force (2,640 N) indicates the rated residual capacity to resist separation under load. Is the 512 push‑rod clamp suitable for light‑weight fixtures? Yes, with a weight of 0.49 kg the clamp integrates well into lightweight fixtures and modular tooling without adding significant mass. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Push Rod Clamp, Vertical Base, M8x50 Spindle, 2640N Holding Force, Blackened - Kukamet
Combine compact design, robust holding force and a durable finish for consistent fixture performance; order the Kukamet push-rod clamp B512-3 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet push-rod clamp B512-3 — vertical-base clamp with M8x50 pressure spindle A push-rod clamp B512-3 designed for secure, repeatable workpiece clamping in jigs and small production fixtures, featuring a vertical base and an M8x50 pressure spindle Compact design, only 0.49 kg Max holding force 2,640 N M8x50 pressure spindle Vertical-base mounting for stability Consistent clamping power that supports production flow The compact clamping element delivers a clearly defined holding force that reduces slippage in routine operations. With a rated holding force of 2,640 N and a maximum pressure force of 2,500 N, the device is suited to fixture tasks where repeatability and secure retention are required. The specified forces provide a measurable basis for fixture design and risk assessment; they enable planners to match clamping performance to workpiece mass and machining loads. The integrated pressure spindle (M8x50) allows precise adjustment of contact pressure, making the clamp suitable for both light milling tasks and assembly jigs where consistent contact is essential. Space-saving construction for compact jigs and easy integration At 0.49 kg, the unit is deliberately light to minimise added mass on tooling plates and movable fixtures. The vertical-base mounting concentrates the clamping footprint, which simplifies layout in dense assemblies and conveyor-mounted stations. The M8 thread size and spindle length permit straightforward fastening and fine height adjustment without additional shimming. The compact geometry helps integrators keep cycle times low while maintaining fixture rigidity; where space and repeatability matter, the design supports efficient cell layouts and quicker changeovers. Hard-wearing finish and simple upkeep for workshop use A black oxide finish provides corrosion resistance and a low-reflectivity surface that reduces visible wear in daily handling. The component is engineered for robust, low-maintenance service in workshop and light industrial environments. The characteristic lever-style action delivers rapid clamping and release, supporting high-frequency operation with minimal setup time. The Kukamet push-rod clamp B512-3 is suitable for jigs, assembly fixtures and repeatable holding tasks where dependable performance and easy maintenance are priorities. For reliable, compact clamping solutions request the Kukamet push-rod clamp B512-3 from Metav Werkzeuge — contact our specialists in Emmerich for technical advice or a suitability check via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B512-3 GTIN: 8680731508710 ECLASS: 21041716 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 0.49 kg Holding force: 2,640 N Max pressure force: 2,500 N Pressure spindle: M8x50 Design and features Material: black oxide finish Mounting: vertical base Category: clamp Type: push-rod clamp FAQ What clamping forces does the clamp provide? The Kukamet push-rod clamp B512-3 offers a holding force of 2,640 N and a maximum pressure force of 2,500 N, values intended to guide fixture design and ensure secure retention under typical workshop loads. How is the clamp mounted in a fixture? Mounting is via a vertical base, which concentrates the footprint and simplifies integration into jigs and tooling plates; the M8x50 pressure spindle allows secure fastening and fine height adjustment. What is the surface finish and its benefit? The item is supplied with a black oxide finish, offering corrosion resistance and a discreet, hard-wearing surface that reduces visible wear and eases routine maintenance. For which applications is this clamp suitable? The clamp is suited to jigs, assembly fixtures and light production work where repeatable holding and fast actuation are required; its compact form factor supports dense fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pushrod Clamp Horizontal Foot, Black Oxide Finish, M8x50 Spindle - Kukamet
Take advantage of the robust combination of 2,500 N clamping force, a compact 0.49 kg body and a horizontal foot mount for fast, reliable fixture clamping; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. Push‑rod clamp 511 — Kukamet push‑rod clamp with 2,500 N clamping force A compact Push‑rod clamp 511 designed for horizontal mounting in jigs, fixtures and production tooling where repeatable, high‑force clamping is required. Push‑rod clamp 2,500 N clamping force Holding force up to 2,640 N Horizontal foot mounting Blackened finish, lightweight 0.49 kg Engineered for consistent clamping performance The Push‑rod clamp 511 delivers a rated clamping force of 2,500 N and a maximum holding force of 2,640 N, values that translate into secure workholding while machining or assembling. These figures are expressed as objective, comparable data to assist selection for specific applications: the rated clamping force indicates the usable actuator output under normal operation, while the holding force shows the maximum static resistance once engaged. This technical clarity supports efficient planning of fixture layouts and process parameters, reducing rework and downtime. Compact design that simplifies fixture integration A low mass of 0.49 kg and a horizontal foot base allow the clamp to be installed in confined spaces and on slim fixture plates without compromising stability. The unit’s compact profile minimises interference with tool paths and eases retrofitting into existing jigs. The horizontal mounting arrangement is suitable for lateral actuation and supports standard fixture geometries, enabling straightforward mechanical integration and predictable motion paths for automated cells. Robust finish and material choices for long service life Finished in a blackened surface treatment, the clamp offers improved resistance to wear and light corrosion in workshop environments while maintaining tight manufacturing tolerances. The simple mechanical design, with an M8x50 spindle interface for pressing or adjustment, reduces service complexity and facilitates quick replacements of consumable items. The combination of a rugged finish and a compact construction yields an economical component that consistently supports repetitive clamping cycles in small to medium production runs. Where this clamp adds value in production Ideal for fixture builders, maintenance workshops and small‑batch production, the clamp is suited to applications that require reliable push‑rod actuation, such as assembly fixtures, inspection jigs and light machining setups. The clear specification of force, mass and mounting orientation assists engineers and technicians in calculating clamping loads and ensuring safe, repeatable operation. The clamp’s straightforward mechanical function supports simple maintenance routines and predictable in‑service behaviour, contributing to smoother production flow. For secure fixture clamping from a trusted partner, request the Kukamet Push‑rod clamp 511 through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical Data SKU: B511-3 GTIN: 8680731503876 Article number: 511 Manufacturer: Kukamet eClass: 21041716 ETIM: EC011973 Facts Clamping force (max): 2,500 N Holding force (max): 2,640 N Weight: 0.49 kg Spindle thread: M8x50 Special features Mounting: horizontal foot Surface: blackened finish Design: push‑rod / lever‑type actuation Material finish: blackened (brünierter) FAQ What clamping force can be expected from this clamp? The Push‑rod clamp 511 provides a clamping force of 2,500 N and a holding force up to 2,640 N as stated in the technical specification. Is the clamp suitable for tight fixture spaces? Yes. The clamp’s compact mass of 0.49 kg and horizontal foot mounting make it suitable for integration into confined fixture plates and tight assemblies. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot interface; the clamp is designed to be fastened to fixture plates in a lateral orientation to suit common jig geometries. What surface protection does the clamp have? The unit is supplied with a blackened finish, providing enhanced wear resistance and basic corrosion protection for workshop environments. Can this clamp be used in automated production cells? The Push‑rod clamp 511 is designed for repetitive actuation and is appropriate for automated fixtures where mechanical push‑rod clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pushrod Clamp M8x50 Horizontal Foot, Zinc Plated Cast Body 14mm Piston, 4000N Holding Force - Kukamet
The combination of a zinc‑plated cast body, a compact horizontal mounting foot and robust force ratings (2,500 N pressing, 4,000 N holding) ensures dependable clamping with low setup effort; order the push‑rod clamp directly via Metav Werkzeuge or request advice from our consultants if further specification is required. Push‑rod clamp 531 (Kukamet) — horizontal foot, 2.5 kN pressing force The Push‑rod clamp 531 is a compact horizontal‑foot clamp for workshop and industrial fixturing, designed to provide repeatable pressing and holding performance in assembly, welding and general clamping tasks. Horizontal mounting foot for stable fixing Holds up to 4,000 N for secure clamping Pressing force 2,500 N for reliable actuation Zinc‑plated cast body for corrosion resistance Stable fixture that saves space and simplifies integration The compact design with a horizontal mounting foot and a total mass of only 0.645 kg delivers a high strength‑to‑size ratio that eases integration into existing jigs and fixtures. The zinc‑plated cast body combines rigidity with corrosion protection, reducing the need for frequent replacements and ensuring constant clamping geometry. This results in predictable repeatability and fewer set‑up interruptions during batch runs. Reliable actuation and holding for consistent processing With a maximum pressing force of 2,500 N (2.5 kN) and a maximum holding force of 4,000 N (4.0 kN), the clamp provides a clear force window for secure part retention. The 14 mm piston diameter enables efficient force transmission while limiting lateral play, which contributes to consistent contact pressure across cycles. Those force figures translate into dependable performance for operations that require firm, repeatable clamping without over‑engineering the fixture. Durable, low‑maintenance components for workshop use Equipped with a M8x50 pressure spindle, the unit uses a common, serviceable threaded component that is easy to replace should wear occur. The corrosion‑protected cast housing minimises surface degradation in workshop environments and reduces maintenance intervals. At the same time, the clamp’s modest weight and footprint make handling and retrofitting tasks straightforward, supporting quicker changeovers and improved process uptime. For procurement or technical clarification regarding the Kukamet push‑rod clamp 531, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to check stock and compatibility with specific fixtures Technical Data Article number: 531-3-Q14 GTIN: 8680731502817 eClass: 21041716 ETIM: EC011973 Facts Pressing force (max): 2,500 N Holding force (max): 4,000 N Piston diameter: 14 mm Weight: 0.645 kg Special features Material: zinc‑plated with cast body Mounting: horizontal foot Pressure spindle: M8x50 Category: Spanner FAQ What maximum pressing force does the clamp provide? The push‑rod clamp 531 delivers a maximum pressing force of 2,500 N (2.5 kN), suitable for secure actuation in typical workshop and light industrial fixtures. Can the clamp hold parts reliably during machining operations? Yes, the unit’s maximum holding force of 4,000 N (4.0 kN) and rigid cast body provide stable retention for many assembly and light machining tasks, contributing to repeatable results. What mounting method is required for this clamp? The clamp is designed for a horizontal mounting foot, providing stable fixation on flat fixture plates or tooling boards. Which spindle specification is used and is it replaceable? The clamp uses an M8x50 pressure spindle, a standard threaded component that can be replaced or adjusted as part of routine maintenance. Who manufactures this clamp and where can more product details be obtained? Kukamet produces the model; for availability, technical drawings or integration advice contact Metav Werkzeuge as listed below. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Three-Point Vertical Clamp 2000N Thrust, Blackened Finish - Kukamet
Take advantage of the combination of 2,000 N clamping force, 2,500 N holding force and a compact 0.415 kg design for dependable, space-saving fixturing; order the Vertikalspanner 212 directly via Metav Werkzeuge or ask our consultants if needed Kukamet Vertikalspanner 212 — Vertical clamp with 2,000 N clamping force The Vertikalspanner 212 is a vertical lever clamp designed for secure workpiece holding in fixtures and jigs across light industrial and workshop settings Vertical foot mounting for stable installation Clamping force up to 2,000 N Holding force up to 2,500 N Compact blackened design, 0.415 kg Consistent clamping where production demands repeatability The vertical holding device delivers a reliable clamping force that supports repeatable processes on the shop floor. With a maximum clamping force of 2,000 N and a peak holding force of 2,500 N, the component secures parts during machining, assembly or inspection operations, reducing rework and downtime. The mechanism is a classic lever clamp design, engineered to convert operator action into a stable, repeatable hold. For engineers specifying fixtures, the pronounced force ratings make it straightforward to calculate safety margins and cycle stability without over‑engineering the mounting system. Compact mounting and straightforward mechanical integration A small footprint and the vertical foot fastening make the unit suitable for tight fixture layouts where height is the critical axis. The integrated M8x50 pressure spindle allows fine adjustment of contact pressure and compensates for slight part height variations, while the overall mass of 0.415 kg keeps the clamping assembly lightweight. The blackened finish offers surface protection and a low-reflective appearance that blends into machine beds and jigs. These attributes mean the clamp can be fitted into existing setups with minimal modification, shortening retrofitting time and lowering integration costs. Durable operation for everyday workshop use Constructed with a protective surface and a straightforward mechanical design, the clamp is intended for regular cycle use in workshops and small-batch production. The robust holding characteristics paired with a compact, corrosion-resistant finish result in a tool that supports both manual and semi-automated processes. The simple geometry and standardised spindle thread allow for easy replacement of wear parts and predictable behaviour over long series runs. For procurement, the combination of mechanical reliability and simple maintenance represents an efficient balance between performance and cost of ownership For ordering or technical advice on the Kukamet Vertikalspanner 212, contact Metav Werkzeuge for fast, expert support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B212-3 GTIN: 8680731507881 Model: 212 Manufacturer: Kukamet Core specifications Clamping force max: 2,000 N Holding force max: 2,500 N Weight: 0.415 kg Pressure spindle: M8x50 Features and applications Mounting type: vertical foot Finish: blackened Category: Clamping device Intended use: vertical clamping in fixtures and jigs FAQ What maximum clamping and holding forces can be expected from this clamp? The Kukamet Vertikalspanner 212 offers a maximum clamping force of 2,000 N and a holding force of 2,500 N, suitable for light industrial fixturing. How is the clamp mounted to a fixture? Mounting is by a vertical foot arrangement; the clamp is designed to be fastened upright for secure, space-efficient installation. Which spindle size is fitted for contact adjustment? The unit is supplied with a pressure spindle sized M8x50 for fine contact adjustment. Is the surface treated for workshop environments? Yes, the clamp has a blackened finish that provides surface protection and a subdued appearance appropriate for machine beds and fixtures. What is the weight of the clamping device? The device weighs 0.415 kg, offering a compact and lightweight option for fixture integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N U‑Foot Toggle Clamp With Hook, Stainless Steel, 2000N Thrust 41mm Thread Length - Kukamet
Benefit from corrosion-resistant construction, a reliable U‑foot mounting and high holding capability for secure fastening in demanding environments. Combine the stainless steel build with a positive-engagement hook and precise thread length for consistent clamping performance; order the latch directly via Metav Werkzeuge or consult our specialists for technical advice. Toggle Latch Clamp 413 — Kukamet, stainless steel with U‑foot mounting Toggle Latch Clamp 413 is a robust closure clamp designed for secure fastening in fixtures, transport boxes and industrial assemblies. Stainless steel construction U‑foot mounting for secure attachment Holding force up to 2,500 N Integrated hook for positive engagement Secure fastening for fixtures and transport The Toggle Latch Clamp 413 delivers dependable clamping where repeatable closure and high retention are required. The combination of a corrosion-resistant stainless steel body and an integrated hook creates a positive-engagement system that resists loosening under vibration. Installed with a U‑foot mounting, the clamp spreads load across a stable base, reducing point stresses on assemblies. For production lines or mobile containers, this latch provides a balance of strength and longevity that supports uninterrupted operation. Built to withstand industrial conditions The latch's material choice and mechanical layout prioritise long-term reliability. The use of stainless steel offers inherent corrosion resistance, reducing maintenance intervals and preserving appearance even in humid or outdoor settings. The mechanism is engineered to convert manual lever action into a high retention force while keeping wear low; the result is a clamping element that keeps fixtures closed securely without frequent adjustment. Where cleanliness and material compatibility matter, the metal finish also minimises contamination risk compared with plated alternatives. Measurable performance for specification sheets Key operational values simplify selection for engineers: a holding force of 2,500 N and a maximum pressing force of 2,000 N indicate the clamp’s capacity to resist shear and tensile loads under service. The thread length of 41 mm provides sufficient engagement for secure bolting into panels or brackets. The compact mass—0.285 kg—helps to keep overall assembly weight low while maintaining mechanical integrity. These quantifiable attributes make the latch straightforward to compare against other closure options and easy to include in procurement specifications. For corrosion-resistant clamping solutions from Kukamet, contact Metav Werkzeuge for availability, precise dimensions and supply logistics — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement through Metav Werkzeuge. Technical data Article number: S413-3 GTIN: 8680731509618 Manufacturer: Kukamet Material: Stainless steel Mounting: U-foot With hook: Yes Core data Weight: 0.285 kg Holding force: 2,500 N Pressing force: 2,000 N Thread length: 41 mm eCl@ss: 21041718 ETIM: EC011973 Special features Corrosion-resistant stainless steel construction U‑foot mounting for stable attachment Integrated hook for positive engagement SKU: S413-3 GTIN: 8680731509618 FAQ What materials is this latch suitable for? The Kukamet toggle latch is made from stainless steel and is suitable for use on metal panels and wooden or composite assemblies where a robust closure is required. How much holding force does the clamp provide? The clamp achieves a holding force of up to 2,500 N; the specification for the Toggle Latch Clamp 413 (SKU S413-3) clarifies its capacity for retention under load. What mounting method does the latch use? Mounting is via a U‑foot, which provides a stable base for bolting the latch to a panel or frame and spreads the load across the attachment area. Is the latch suitable for outdoor or humid environments? The stainless steel construction gives the 413 latch good corrosion resistance, making it appropriate for humid or outdoor applications where exposure is expected. What are the key dimensions relevant to installation? Relevant installation values include a thread length of 41 mm and a compact weight of 0.285 kg; these allow straightforward integration into most fixture designs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm Arbor Wrench For Collet Ø32mm, DIN 6368 Hardened Steel - TECWERK
Take advantage of the DIN 6368 conformity, the fit for a 32 mm arbor and the 250 mm length to ensure secure tightening and safe access to cutter clamping screws; order the item directly via Metav Werkzeuge or ask the consultants for further specification support. TECWERK milling arbor key DIN 6368 – for 32 mm arbor, 250 mm length The milling arbor key DIN 6368 is designed for tightening and loosening milling cutter clamping screws on 32 mm arbors, ensuring compliant and repeatable clamping in production and workshop environments. DIN 6368 standardised design For arbors with 32 mm diameter 250 mm overall length for good reach Special hardened steel with blued finish Precision fit reduces setup time and rejects The tool delivers a DIN 6368 conforming interface that matches industry-standard arbors and clamping screws, which reduces calibration and setup variance. Because the key is matched to a 32 mm arbor diameter, spindle interfaces seat consistently, lowering the risk of incorrect torque application and minimising costly rework. The standardised design supports leaner changeover routines and contributes directly to steady production flow. Robust construction for long service life Manufactured from special hardened steel and finished to a blued tone, the implement resists wear and surface corrosion under workshop conditions. The heat-treated core increases resistance to edge deformation during repeated use, so tool life is extended and replacement intervals are reduced. This durability translates into lower downtime and a more predictable maintenance cadence for machining operations. Designed for safe access and confident handling The 250 mm overall length provides additional reach for cutters recessed in adapters or tight set-ups, while preserving manual control during torque application. The geometry focuses force transfer to the clamping interface, making the action of tightening and loosening the clamping screws efficient without overstressing adjacent components. In practice, this improves operator comfort and reduces the chance of slippage that could damage tooling. Standards compliance and clear application scope Tool function is specified for use with cutter clamping screws in accordance with DIN 6367, ensuring compatibility with common arbor assemblies. Marked conformity gives procurement and quality teams an objective reference when specifying tools for machining stations, enabling straightforward integration into existing tool inventories and maintenance procedures. The compact specification supports both production lines and specialist workshops requiring reliable, standards-based equipment. For reliable DIN 6368 conformity and efficient arbor servicing, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for procurement and technical guidance on the TECWERK milling arbor key (SKU 4000832441NW). Technical data Article number: 4000832441NW Product type: Milling arbor key Manufacturer: TECWERK Standard: DIN 6368 Packaging unit: 1 Core measurements Overall length: 250 mm Suitable for arbor diameter: 32 mm Special features For tightening and loosening cutter clamping screws (DIN 6367) Special steel, hardened and blued finish Conforms to DIN 6368 FAQ What arbor diameter is this key intended for? The TECWERK milling arbor key is intended for arbors with a 32 mm diameter and is specified accordingly in the product documentation. Does the tool meet an industry standard? Yes, the key is manufactured to DIN 6368 and is suitable for use with clamping screws specified under DIN 6367. What is the total length and why does it matter? The overall length is 250 mm, which gives improved reach into recessed assemblies while maintaining control during tightening and loosening. What material and finish are used for durability? The key is made from special hardened steel and is tempered to a blued finish to enhance wear resistance and surface protection. Can this key be used for other arbor sizes? The tool is dimensioned for a 32 mm arbor; use on non‑specified diameters is not recommended as it may compromise clamping security and compliance. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
250mm Chip Guard Shield Arm 350mm, Plastic - LOC-LINE
Reliable protection for the machining zone is provided by a compact chip guard with a 190 x 250 mm shield and a 350 mm arm for extended reach; benefit from straightforward replacement and simple integration into existing LOC-LINE installations by ordering via Metav Werkzeuge or consulting the Metav team for fitment advice. LOC-LINE Chip Guard Shield 190 x 250 mm with 350 mm Arm A LOC-LINE chip guard shield designed for chip and coolant control on machine tools and CNC workstations. Chip guard 190 x 250 mm 350 mm arm length for extended reach Compatible with LOC-LINE modular fittings Supplied as single unit Robust protection for the machining zone without compromise The compact chip guard provides a targeted barrier that limits splash and swarf spread around the cutting area, reducing cleaning intervals and protecting surrounding fixtures. With a shield footprint of 190 x 250 mm, the device concentrates containment where it matters most while maintaining a low profile that avoids interference with tooling and workpiece access. The containment effect supports cleaner benches and reduces part rework associated with stray debris. Precise positioning enabled by the 350 mm arm A 350 mm arm delivers the necessary reach for many common machining setups and can be routed to avoid tool paths while keeping the shield in the optimal position. The mounting system is compatible with LOC-LINE modular fittings, which enables quick alignment and repeatable placement. This arrangement improves process reliability because the guard remains stable during machining, helping to preserve tool life and reduce unplanned downtime. Easy replacement and workshop integration for efficient workflows Supplied as a single unit, the component is intended for swift replacement during maintenance or reconfiguration, minimising machine idle time. Integration into standard LOC-LINE layouts is straightforward, allowing retrofit to existing coolant hoses and modular supports. The practical format supports lean workshop routines: fewer adjustments, faster serviceability and consistent protection across shifts. Practical advantages for procurement and operations The compact design and established LOC-LINE interface reduce the need for bespoke mounts, streamlining spare-part lists and procurement. The shield's geometry focuses containment without obstructing operator sight lines or access, improving operator confidence at the machine. Where a documented back-up strategy is required, the simple specification and clear dimensions assist in planning and inventory control. Contact Metav Werkzeuge to arrange supply of the LOC-LINE chip guard with 350 mm arm and confirm fitment for specific machines or to request technical clarification Technical data Article number: 4000833453NW Product: Chip guard shield (LOC-LINE) Packaging unit: 1 Facts Shield dimensions: 190 x 250 mm Arm length: 350 mm SKU: 4000833453NW Special features Brand: LOC-LINE Product type: Chip guard shield Supplied as single unit FAQ What machines is the chip guard suitable for? The LOC-LINE chip guard shield is suitable for machine tools and CNC workstations where a compact 190 x 250 mm shield and 350 mm arm provide effective coverage without obstructing tool access. How is the shield mounted and positioned? Mounting is via the LOC-LINE interface; the 350 mm arm allows flexible positioning and repeatable placement of the chip guard shield to direct chips and coolant away from critical areas. Is the material specified for the shield? Material details are not provided in the available data for the LOC-LINE chip guard shield (SKU 4000833453NW); please consult Metav Werkzeuge for material confirmation if required for specific applications. Can the shield be replaced quickly during maintenance? Yes, the chip guard shield is supplied as a single unit to enable rapid replacement and minimise machine downtime. Does the product include additional mounting hardware? The supplied data lists the chip guard shield and arm length; further mounting accessories should be checked with Metav Werkzeuge to ensure compatibility with the existing LOC-LINE layout. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Chuck Jaw Set, Stepped Hardened Jaws, 3 Pieces - RÖHM
Take advantage of the combination of a hardened, stepped jaw design, compatibility with 250 mm chucks and the convenience of a complete three-piece set to reduce setup time and improve clamping reliability on turning centres. Order the jaw set directly via Metav Werkzeuge or consult the team for selection and compatibility advice. RÖHM jaw set for 250 mm chuck — hardened, stepped jaws, 3-piece The RÖHM jaw set for 250 mm chuck offers hardened, stepped jaws designed for reliable clamping in turning and general workshop applications. Hardened, stepped jaw design For chuck Ø 250 mm compatibility Includes 3-piece set Optimised fit for 250 mm chucks reduces setup time This jaw set is engineered for direct use with chucks of Ø 250 mm, providing a clear and verifiable compatibility specification that simplifies procurement and planning. The three-piece set supplies a complete jaw complement for standard three-jaw chucks, which minimises downtime during changeover. By choosing a set that matches the chuck diameter, rework on adapters or time-consuming modifications is avoided, creating a more efficient production flow. Durable, precise clamping for consistent machining results The hardened surface and stepped jaws design deliver enhanced wear resistance and a secure contact profile across multiple diameters, which helps to maintain concentricity and repeatability during turning operations. Hardened jaws resist deformation under clamping loads, so runout remains stable and part tolerances are easier to hold. For shops seeking predictable results on medium-sized workpieces, this combination supports reliable part quality and reduced scrap rates. Practical handling and integration into workshop processes The set is supplied as a compact, ready-to-install package containing three dedicated jaws, so fitting and replacement are straightforward and quick. Clear identification of chuck compatibility (Ø 250 mm) aids stock management and prevents wrong-part usage on the shop floor. When paired with routine inspection and sensible maintenance, the component life is extended and service intervals become more predictable, supporting continuous production with minimal interruptions. Contact Metav Werkzeuge for tailored advice on the RÖHM jaw set for 250 mm chucks and to confirm fitment for specific machines — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4121269250NW Manufacturer: RÖHM Product type: Jaw set Facts Chuck compatibility: Ø 250 mm Packaging unit: 1 Set contents: 3 pieces Special features Hardened, stepped jaws Designed for three-jaw chucks Original label retained for identification FAQ Are these jaws suitable for standard three-jaw chucks? The RÖHM jaw set is designed as a complete three-piece set for use with three-jaw chucks specified at Ø 250 mm, matching the common mounting and geometry for that chuck size. What does “stepped jaws” mean in practice? Stepped jaws provide a series of discrete contact levels so a range of diameters can be clamped securely without intermediate adapters; the RÖHM stepped profile allows progressive clamping positions while retaining stable contact. Are the jaws heat-treated or surface-hardened? Yes, the product description specifies hardened jaws, which improves wear resistance and reduces deformation under clamping loads, supporting consistent concentricity during machining. How many pieces are supplied and what is the article number? The set contains three pieces; the article number is 4121269250NW and the set is labelled for chuck Ø 250 mm compatibility. Can these jaws be used for both external and internal clamping? The stepped form is typically advantageous for external gripping across multiple diameters; final suitability for internal clamping should be verified against the chuck and jaw geometry in the specific application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Chuck Key 12mm Square Shank With Spring-Loaded Sleeve, For 50mm Chuck Ø - RÖHM
Take advantage of a compact, workshop-ready tightening tool that combines a 12 mm square drive with a spring-mounted sleeve to reduce the risk of the key remaining in the chuck; reliable handling and simple storage support smoother work processes. Order the RÖHM chuck key directly via Metav Werkzeuge or ask the consultants for compatibility advice. RÖHM Spannschlüssel for chuck, 12 mm square drive with spring-mounted sleeve RÖHM Spannschlüssel f.Futter-D.250mm 4-KT.12mm RÖHM is a purpose-built chuck key designed for secure engagement with compatible four-sided square drives and everyday workshop use. 12 mm square drive for secure engagement Spring-mounted sleeve prevents key jamming Compact design for simple storage Suitable for standard four-sided chuck drives Precise engagement for repetitive tightening tasks The primary advantage of a high-quality chuck key lies in consistent force transmission and positive engagement. With a 12 mm square drive, this tool delivers a reliable interface to a four-sided chuck drive, reducing play and ensuring repeatable tightening sequences. In practice, this means less time checking jaw seating and more predictable clamping behaviour when preparing parts for machining. The robust drive geometry supports routine operations across general workshop and light industrial settings, providing a straightforward mechanical interface without the need for auxiliary adapters. Design that prevents accidental locking in the chuck A notable practical safeguard is the spring-mounted sleeve, which is engineered to prevent the key from becoming unintentionally lodged in the chuck. This feature reduces downtime caused by stuck keys and avoids minor incidents that interrupt the workflow. The insert square connection ensures the tool locates positively in the chuck drive and withdraws cleanly when the sleeve is actuated. For workshops where quick tool changes and operator safety are priorities, this design detail enhances both convenience and operational safety without adding complexity. Built for everyday workshop routines Handy and compact, the key is suitable for being carried in a toolbox or mounted on a workstation rail for immediate access. The straightforward construction focuses on dependable mechanical function rather than electronic or adjustable components, which makes it particularly well suited to maintenance teams, toolroom staff and metalworking technicians who require a no-frills tightening implement. The absence of electronic parts or consumable elements means predictable service life and low maintenance effort, helping to keep routine operating costs down while preserving consistent clamping performance. Clear compatibility cues and selection advice Compatibility is primarily determined by the 12 mm square drive and the four-sided chuck interface; when selecting a tightening key, verify that the chuck accepts a 12 mm square insert. The tool’s features — including the spring-mounted sleeve and insert square configuration — are intended to match standard four-sided drives used in many chucks. For bespoke or non-standard drive forms, consult technical documentation or request brief verification to confirm fit. Metav Werkzeuge can provide rapid clarification on matching this key to specific chuck models, ensuring the right tool arrives at the workbench first time. For purchasing information or to confirm compatibility of the RÖHM chuck key with existing chucks, contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich. Technical data Article number: 4121409080NW SKU: 4121409080NW Brand: RÖHM Product type: Chuck key Packaging unit: 1 Facts Square drive: 12 mm Four-sided drive type: 4-KT (four-sided) UID: 4121409080NW Special features Spring-mounted sleeve prevents key from remaining in the chuck Insert square for positive engagement Compact format suitable for workshop storage FAQ What square drive size does this chuck key use? The RÖHM chuck key features a 12 mm square drive, providing positive engagement with standard four-sided chuck drives. Does the key prevent accidental jamming in the chuck? Yes, the tool includes a spring-mounted sleeve designed to reduce the risk of the key being left in the chuck after use. Is this key suitable for heavy industrial chucks? The tightening key is intended for standard four-sided chuck drives; confirm the chuck’s drive format and load requirements before use to ensure suitability. How is the RÖHM chuck key supplied? The item is supplied as a single piece per packaging unit, listed under SKU 4121409080NW. Can the insert square be removed or replaced? The tool uses an insert square connection for secure engagement; consult technical specifications or Metav Werkzeuge for guidance on service or replacement options. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Clamping Screw M16x2P, Heat-Treated Steel - Vertex
Taking advantage of the M16x2P thread, heat-treated steel construction and a 250 mm overall length, this clamping solution delivers reliable, repeatable workholding with high tensile strength and low deformation risk. Order the Vertex clamping screws directly via Metav Werkzeuge or consult the Metav team for specification guidance. Clamping screws — M16x2P thread, 250 mm length, Vertex The Clamping screws are a workholding fastener designed for secure, repeatable clamping in industrial fixtures and jigs, combining robust heat-treated steel construction with a standard metric thread for straightforward integration. Heat-treated steel for high strength M16x2P metric thread for standard fittings 250 mm length for deep clamping reach Robust design for repeatable workholding Secure and consistent clamping for production workflows Engineered for demanding workshop environments, this clamping bolt offers a combination of tensile strength and dimensional stability derived from its heat-treated steel construction. The thermal treatment increases hardness and wear resistance, reducing elongation under load and helping to maintain clamping accuracy over repeated cycles. As a result, fixture setups benefit from repeatable clamping and fewer readjustments, which supports steady production throughput and reduces downtime. Simple integration with standard fixtures and jigs The M16x2P thread is a widely adopted metric standard, enabling direct replacement in many existing assemblies and simplifying spare-part logistics. With a 250 mm overall length, the component provides extended reach for deep clamping tasks without the need for additional extensions. The standard thread form also supports compatibility with common nuts and tapped holes, making the item a practical choice for retrofits and new fixture designs alike, while maintaining predictable mechanical behaviour under load. Durable performance and measurable specifications Weighing approximately 0.31 kg, the clamping fastener combines mass and material properties to resist bending and provide stable pressure transmission during operation. The robust manufacturing process and material selection focus on longevity, so maintenance intervals can be planned around predictable wear patterns rather than unexpected failures. Clear technical parameters, such as thread specification and length, enable precise selection for engineering calculations and quality control documentation. Contact Metav Werkzeuge to specify Vertex clamping screws for reliable, repeatable workholding in production; order via email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast, European distribution from Emmerich Technical Data Article number: 13510M GTIN: 4061905089244 Eclass: 21022190 Manufacturer: Vertex Data Length: 250 mm Thread: M16x2P Weight: 0.31 kg Special features Material: Heat-treated steel SKU: 13510M Brand: Vertex FAQ What thread specification does the clamping screw use? The clamping screw uses a standard M16x2P metric thread, allowing integration with common tapped holes and nuts. What is the overall length and suitability for deep clamping? With a 250 mm overall length, the Vertex clamping screw is suitable for applications requiring extended reach and secure engagement in deep fixtures. What material is the fastener made from and why does it matter? The fastener is made from heat-treated steel, providing increased hardness and improved wear resistance for prolonged service life under clamping loads. Is the clamping screw heavy-duty enough for repetitive production use? The Vertex clamping screw is designed for repeatable workholding; its heat-treated material and mass offer stable clamping pressure over multiple cycles, supporting continuous production processes. Which article or SKU should be quoted when ordering? Please quote SKU 13510M and the GTIN 4061905089244 to ensure the correct Vertex clamping screw is supplied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
250mm Clamping Screw M18x2.5P, Heat-Treated Steel - Vertex
Benefit from a robust combination of heat‑treated steel construction, an M18×2.5 threaded shank and a 250 mm overall length for dependable, repeatable clamping in industrial fixtures; order or request advice directly via Metav Werkzeuge for reliable supply and specification support. Clamping screw – M18×2.5 thread, 250 mm (Vertex) The clamping screw is a heavy‑duty fastening component designed for secure clamping in fixtures and jigs across workshop and industrial applications. Heat-treated steel for long service life M18×2.5 threaded shank for secure fixing 250 mm overall length for deep clamping reach Designed for industrial fixtures and jigs Durable clamping for uninterrupted production Constructed from heat‑treated steel, this clamping fastener delivers high wear resistance and consistent performance under load. The thermal treatment increases surface hardness and fatigue strength, which reduces the frequency of replacements and minimises unplanned downtime. For assembly lines and jigs where sustained clamping force is required, the robust material selection supports a longer service life and predictable behaviour during repeated cycles, contributing directly to improved process reliability. Precision thread engagement for repeatable setups The metric M18×2.5 thread offers reliable axial engagement and a moderate pitch that balances torque control with fine positional repeatability. In practice, this means fixtures set with this fastener achieve consistent clamping depth and force from one setup to the next, reducing rework and setup time. The defined thread geometry also eases integration with standard metric tapped holes and nuts, supporting compatibility in mixed tooling environments and aiding efficient machine‑side or bench reconfiguration. Extended reach to simplify complex clamping With a 250 mm overall length, the component provides substantial reach for clamping deeper workpieces or securing thick assemblies without additional extensions. The extended shank reduces the need for intermediate adapters and allows direct clamping in many fixture layouts, which shortens assembly sequences and lowers the number of components required. The relatively low mass of the fastener supports easy handling while still providing mechanical robustness for demanding tasks. Practical advantages for workshop integration Delivered under the Vertex name, the design emphasises serviceability and straightforward use in industrial contexts. The combination of durable material and standard thread form reduces inventory complexity: one proven fastener can serve multiple fixtures. Routine maintenance is limited to basic inspection and cleaning of the thread; lubrication with an appropriate light oil will preserve thread life where required. The overall specification supports a pragmatic balance of strength, repeatability and ease of integration for engineering and maintenance teams. Contact Metav Werkzeuge for current availability, technical clarification on the Vertex clamping screw 13610M and assistance with specification matching to production needs Technical Data Article number: 13610M GTIN: 4061905092794 Manufacturer: Vertex Facts Thread: M18×2.5 Length: 250 mm Weight: 0.4 kg Special features Material: Heat-treated steel Design: Clamping screw for fixtures and jigs Intended use: Heavy‑duty industrial clamping FAQ What are the exact dimensions and thread of the clamping screw? The clamping screw has an overall length of 250 mm and a metric thread of M18×2.5; the item is listed under SKU 13610M. Which material is the fastener made from? This Vertex clamping screw is manufactured from heat‑treated steel to enhance durability and fatigue resistance. Is the item suitable for heavy‑duty applications? The Vertex clamping screw 13610M is designed for industrial clamping tasks where sustained force and repeated cycles are expected. What is the weight of the clamping screw? The clamping screw weighs 0.4 kg. How can the product be identified for ordering? Refer to article number 13610M or GTIN 4061905092794 when specifying or reordering this clamping screw. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
250mm Clamping Screw M20x2.5P, Hardened Steel - Vertex
Take advantage of a robust fastening solution that combines heat-treated steel construction with a standard M20 x 2.5 metric thread and a long 250 mm reach for secure, repeatable clamping. Order the part directly via Metav Werkzeuge or ask our consultants for specification support. Clamping screw (13710M) – M20 x 2.5 pitch, 250 mm, Vertex A clamping screw engineered for heavy-duty fixtures and workshop jigs, offering deep engagement and consistent tightening performance in industrial assemblies Heat-treated steel for improved durability Metric thread M20 x 2.5 pitch 250 mm overall length for deep clamping Secure, repeatable fastening for production use The design focuses on consistent clamping force and long-term reliability, helping to reduce setup times and minimise rework. By using a single, standardised metric thread and a long shank, this component enables straightforward integration into existing jigs and fixtures while delivering predictable mechanical behaviour under load. This reliability translates into fewer interruptions on the production line and a more efficient assembly routine. Material performance that prolongs service life Constructed from heat-treated steel, the component benefits from increased hardness and improved wear resistance compared with untreated alternatives. Heat treatment refines the microstructure of the steel, which enhances fatigue strength and reduces the risk of thread deformation during repeated tightening. For workshop environments where robust mechanical performance matters, this material choice lowers life-cycle costs through extended service intervals and reduced replacement frequency. Metric dimensions for compatibility and reach The M20 x 2.5 thread is a widely used metric standard that ensures compatibility with common nuts and threaded receptacles, simplifying procurement and maintenance. The 250 mm overall length provides substantial reach for deep clamping tasks or when additional clearance is required between the clamping head and the secured part. Explaining the thread: the “2.5” figure denotes the thread pitch in millimetres, a key parameter for matching nuts and tapped holes accurately. Practical fitment and workshop benefits With a compact mass of approximately 0.5 kg, the component is sturdy yet manageable for manual handling and automated assembly alike. Supplied by Vertex, the item is identifiable under SKU 13710M and is suitable for incorporation into standard fixture designs. The straightforward geometry and familiar thread form reduce the need for bespoke components, saving design time and simplifying stock management for maintenance teams. Contact Metav Werkzeuge in Emmerich for ordering and technical matching of the Vertex clamping screw 13710M — email info@metav-werkzeuge.com for detailed specifications Technical data SKU: 13710M GTIN: 4061905089251 Manufacturer: Vertex Core specifications Length: 250 mm Thread: M20 x 2.5 pitch Weight: 0.5 kg eClass: 21022190 Materials & special features Material: Heat-treated steel Function: Clamping screw for fixtures Brand: Vertex FAQ What thread standard does the clamping screw use? The clamping screw is manufactured with a metric M20 x 2.5 thread, compatible with standard M20 nuts and tapped holes. What is the overall length and why does it matter? The overall length is 250 mm, which offers extended reach for deep clamping applications and additional clearance in complex fixtures. What material is the component made from and what are the benefits? Made from heat-treated steel, the component provides increased hardness and wear resistance, improving fatigue life and reducing replacement frequency. Is the part suitable for heavy-duty industrial fixtures? Yes; the design and material selection make the component appropriate for demanding workshop and industrial fixture applications where secure, repeatable clamping is required. How can the part be identified for reordering? Reference SKU 13710M and the manufacturer Vertex to ensure correct replenishment and compatibility. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com