Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
3000 N Vertical Clamp 91mm Arm, Zinc Plated, Massive Holding Arm with Safety Lock - Kukamet
The robust holding arm and integrated safety locking secure fixtures reliably, while a zinc-plated finish combines corrosion resistance with low maintenance; the compact 91 mm reach and 3,000 N clamping force support efficient jig and fixture workflows. Order the vertical clamp directly via Metav Werkzeuge or consult the technical advisors if required. Vertikalspanner 213 — Vertical clamp with 3,000 N clamping force (Kukamet) The 213 vertical clamp provides secure vertical holding for jigs, fixtures and assembly operations in workshop and production environments *Massive holding arm with safety lock *3,000 N clamping force for firm fixing *Zinc-plated corrosion-resistant finish *91 mm arm reach for versatile setups Reliable clamping that reduces rework and downtime Built around a massive holding arm and a proven safety locking mechanism, this vertical clamping device delivers consistent, repeatable force that protects parts during machining and assembly. The specified 3,000 N clamping force translates into stable fixturing under load, lowering the risk of movement-related rejects and minimising the need for repeated adjustments. In environments where repeatability and process reliability are essential, the combination of robust mechanics and a secure lock reduces cycle interruptions and supports steady throughput. Compact layout for quicker setups and flexible fixturing A short reach of 91 mm and an angle foot mounting allow the clamp to be integrated into tight jigs and confined fixture layouts without sacrificing accessibility. The zinc-plated surface delivers corrosion resistance suitable for general workshop atmospheres, while the 0.93 kg mass keeps the component lightweight for easy handling during fixture changes. These characteristics shorten set-up times and simplify retrofitting in diverse production cells, enabling faster changeovers and improved machine uptime. Designed for workshop resilience and simple maintenance The construction combines a lever-driven action with a heavy-duty arm to provide a high holding capacity of 3,300 N, ensuring that clamped components remain secure during downstream operations. The lever-action arrangement gives tactile feedback and rapid operation, supporting repetitive manual procedures with minimal operator fatigue. Materials and finishes are chosen for durability, so routine upkeep is limited to occasional inspection and lubrication, keeping total cost of ownership low while guaranteeing dependable performance in daily use. Request availability or technical advice from Metav Werkzeuge for the Kukamet 213 vertical clamp with its 3,000 N clamping force — Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 213-4-D-L-C1 GTIN: 8680731502060 ECLASS: 21041717 ETIM: EC011973 Brand: Kukamet Facts Arm length: 91 mm Clamping force (max): 3,000 N Holding force (max): 3,300 N Weight: 0.93 kg Special features Material: zinc-plated Mounting: angle foot Massive holding arm and safety locking Lever-action mechanism Story trigger: lever clamp FAQ What clamping and holding forces are provided? The clamp delivers a clamping force of 3,000 N and a holding capacity of 3,300 N, making the Kukamet 213 suitable for firm, repeatable fixture tasks. Which mounting method is used for installation? The device uses an angle foot mounting, enabling secure attachment to fixtures and plates where vertical clamping is required. What materials and finishes ensure durability? Constructed with a zinc-plated finish and a robust holding arm, the unit resists corrosion and is designed for long-term workshop use. Is the mechanism suitable for frequent manual operation? Yes. The lever-action mechanism and safety locking provide quick, tactile clamping with secure engagement for repetitive workflows. What are the product identifiers for ordering and inventory? SKU: 213-4-D-L-C1; GTIN: 8680731502060 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000 N Vertical Clamp With M10x70 Pressure Spindle, Blackened Finish - Kukamet
Take advantage of a compact clamp with holding force 3,300 N and pressing force 3,000 N for secure vertical fixturing; its M10 x 70 pressure spindle and angle-foot mounting deliver dependable performance in repetitive setups. Order directly via Metav Werkzeuge or consult our technical advisors for application support. Vertical clamp 213 — Kukamet vertical clamp with angle base and 3.3 kN holding force Vertical clamp 213 is a workshop-grade vertical clamping device designed for stable, repeatable fixturing in machining and assembly applications. Robust blackened finish Holding force up to 3,300 N Compact weight 1.05 kg for easy fixture changes Angle base for secure mounting Secure clamping performance for repetitive production The clamp delivers a holding force of 3,300 N while providing a maximum pressing force of 3,000 N, ensuring components remain immobile during vertical operations. The integrated M10 x 70 pressure spindle is a standard thread and stroke combination that translates spindle travel into predictable clamping pressure, aiding process planning. This measurable performance reduces rework risk and supports stable cycle times, making the clamp a rational choice for production environments where repeatability matters. Small footprint, straightforward installation and corrosion-resistant finish Weighing just 1.05 kg, the unit is easy to handle during fixture changes and reconfiguration, while the blackened finish offers basic surface protection against wear and light corrosion. The angle base (angle-foot mounting) provides a compact mounting footprint, enabling placement close to workpieces and efficient use of tooling space. The solid, lean design reduces obstruction around the work area and shortens setup time — a practical benefit in busy shops. Versatile use across workshop fixturing tasks The device is suitable for general vertical clamping and assembly tasks where a stable clamp with predictable force values is required. Its simple mechanical concept supports integration into jigs and fixtures without specialised adapters, and the compact construction aids multi-station setups. Clear technical values and a standard pressure spindle make planning straightforward for engineering teams and reduce ambiguity when specifying fixtures. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet vertical clamp 213 into existing fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com for a quotation or application guidance Technical Data SKU: B213-4 GTIN: 8682843523360 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Facts Weight: 1.05 kg Pressing force max: 3,000 N Holding force max: 3,300 N Pressure spindle: M10 x 70 Special features Material/finish: blackened finish Fastening type: angle base Arm: not applicable Designation: vertical clamp, model 213 FAQ What is the maximum holding force of this clamp? The clamp achieves a maximum holding force of 3,300 N; the specification is provided for the Vertical clamp 213 by Kukamet (SKU B213-4) to support fixture design. Which spindle does the clamp use and what does it mean? The device uses an M10 x 70 pressure spindle; this indicates a standard M10 thread with a 70 mm spindle length, providing predictable travel and clamping engagement for the Vertical clamp 213. Can the clamp be mounted directly to a fixture plate? Yes, the angle base allows secure mounting to plates and jig frames; the compact foot reduces interference with nearby tooling and simplifies integration. Is the surface treated to resist corrosion? The clamp has a blackened finish that provides basic protection against wear and light corrosion, suitable for typical workshop environments. For which applications is the clamp particularly suitable? It is intended for vertical clamping and assembly tasks that require reliable, repeatable holding forces in machining and fixture operations; technical values facilitate planning and process stability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000 N Vertical Clamp With Safety Lock, M10x70 Plunger, Zinc Plated - Kukamet
Take advantage of the high holding force and the integrated safety lock to keep production processes stable and safe; combine durable galvanised construction with compact handling for long service life. Order the 212 vertical clamp directly via Metav Werkzeuge or consult the team for application advice. 212 Vertical clamp (Kukamet) — 3,300 N holding force, safety lock The 212 Vertical clamp is a galvanised vertical-foot clamping device designed for reliable, repeatable workholding in workshop fixtures and industrial jigs. Safety lock for secure clamping Holding force 3,300 N for firm fixation Clamping force 3,000 N for consistent pressure Galvanised finish for corrosion resistance Consistent fixation that keeps production moving With a holding force of 3,300 N and a clamping force of 3,000 N, this clamping device provides measurable, repeatable restraint that reduces part movement during machining or assembly. The forces are specified in newtons to allow straightforward comparison with other workholding components; this transparency supports planning for fixture loads and helps avoid over- or under-clamping. By using defined values rather than subjective descriptors, the unit supports process reliability and predictable cycle times. Designed for workshop environments and long service life The body is galvanised, offering enhanced resistance to corrosion in daily workshop use and in environments with occasional exposure to coolants or humidity. Mounted via a vertical foot, the clamp fits typical jig plates and fixture bases, allowing straightforward integration into existing setups. The compact mass of 0.9 kg keeps the component unobtrusive on the toolplate while contributing little to moving-mass calculations for automated systems. These design choices reduce maintenance frequency and simplify inventory decisions for production managers. Fast operation with a built‑in safety mechanism Operation is optimised for speed and safety. The clamp features a safety lock, which prevents accidental release once engaged and supports secure handling of workpieces under load. The M10x70 pressure spindle provides an accessible adjustment range for achieving the required contact pressure without special tools. Together, these elements offer both the quick action of a lever-style clamp and the controlled, fail-safe behaviour demanded in repetitive operations, improving both throughput and operator confidence. Compact integration and straightforward handling Engineered for straightforward retrofitting into benches, fixtures and custom jigs, the unit’s vertical-foot mounting and standard spindle dimensions facilitate interchangeability across tool setups. The compact footprint and galvanised surface make it suitable for mixed-material production lines where easy repositioning and resistance to surface wear are advantages. Clear technical data and standardised interfaces support efficient procurement and replacement planning for maintenance teams. Contact Metav Werkzeuge today for tailored advice on integrating the Kukamet 212 Vertical clamp into production fixtures and to arrange prompt delivery from the Emmerich warehouse. Technical data Article number: 212-4-L GTIN: 8680731501759 Manufacturer: Kukamet Model: 212 Facts Holding force: 3,300 N Clamping force (max): 3,000 N Weight: 0.9 kg Pressure spindle: M10x70 Special features Material: galvanised Mounting type: vertical foot Safety lock: yes Type: lever clamp eClass: 21041717 ETIM: EC011973 FAQ Is the clamp suitable for use in machining fixtures? Yes. The 212 Vertical clamp is designed for workshop and fixture use, offering defined clamping force and holding force values that make it suitable for many machining and assembly applications. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot, allowing secure attachment to standard fixture plates and straightforward replacement in existing jigs. What maintenance does the clamp require? Routine inspection of the safety lock and cleaning of the M10x70 pressure spindle threads is recommended; the galvanised finish reduces corrosion-related maintenance. Can the clamp be used where corrosion resistance is required? Yes. The galvanised surface improves resistance to moisture and workshop contaminants compared with untreated steel. Does the clamp allow quick adjustment of clamping height? Adjustment is achieved through the M10x70 pressure spindle, which permits accessible and tool-free height changes within its thread range. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000 N Vertical Clamp With Safety Lock, M10x70 Spindle, Black Oxide Finish - Kukamet
Take advantage of the combination of a compact lever mechanism, a safety lock and dependable clamping force to secure fixtures reliably and reduce set-up time; order the Kukamet 213 vertical clamp directly via Metav Werkzeuge or consult our advisors for specification guidance. Kukamet 213 Vertical Clamp — Compact vertical clamp with safety lock and angle base The 213 vertical clamp is a compact lever-style clamping component designed for fixture and jig applications where secure, repeatable clamping and fast cycle times are required Safety locking mechanism for secure hold Angle base for straightforward panel mounting Maximum clamping force 3,000 N Compact weight of 1.05 kg for easy handling Consistent clamping for dependable production The clamp delivers a maximum clamping force of 3,000 N and a holding force of 3,300 N, providing a measurable basis for process stability in small- to medium-sized fixtures. These figures translate into dependable part retention under lateral and transverse loads, reducing the need for rework. The mechanical design of this lever-style clamp produces a consistent applied force with each actuation, which supports repeatable setup times and predictable cycle performance on the shop floor. Fast, secure mounting that saves assembly time Engineered with an angle base, the unit can be mounted to t-slots, plates or bespoke jigs without extensive modification. The integrated pressure spindle is specified as M10x70, which permits straightforward connection to standard machine fixtures and ensures correct preloading where required. At 1.05 kg the component remains easy to position during assembly yet substantial enough for stable operation, helping to speed up fixture assembly and reduce operator strain during repeated set-ups. Robust finish for low maintenance and workshop longevity Finished in a blackened finish, the clamp resists surface wear while maintaining a professional appearance across repeated handling. This treatment reduces the visibility of scuffs and offers a basic level of corrosion protection, lowering the frequency of maintenance interventions. The material and surface specification are selected to balance durability with cost-effectiveness, making the component suitable for everyday use in production and maintenance environments where simple, reliable hardware is required. Safe operation that supports efficient workflows Equipped with a safety lock, the device prevents accidental release once clamped, supporting operator safety and process reliability. The lever clamp concept enables rapid actuation and release, shortening cycle times and simplifying manual handling in assembly or test stations. Together, these characteristics improve workplace ergonomics and reduce the likelihood of part movement during machining or inspection processes, aligning with rational production goals for throughput and uptime. Discuss specification options for the Kukamet 213 vertical clamp with Metav Werkzeuge — request a tailored recommendation or a technical data sheet by contacting Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B213-4-L GTIN: 8680731508048 eClass: 21041717 ETIM: EC011973 Core specifications Maximum clamping force: 3,000 N Maximum holding force: 3,300 N Weight: 1.05 kg Pressure spindle: M10x70 Materials and special features Surface: blackened finish Fastening type: angle base Safety lock: with safety locking mechanism Arm: not applicable Product type: vertical clamp Story trigger: lever clamp FAQ What maximum clamping force does the clamp provide? The Kukamet 213 vertical clamp provides a maximum clamping force of 3,000 N and a holding force of 3,300 N for secure part retention. How is the clamp mounted to a fixture? Mounting is via the supplied angle base; the clamp’s pressure spindle is specified as M10x70 for conventional fixture attachment. Is a safety device included with the clamp? Yes, the unit includes a safety lock that prevents accidental release once the clamp is set. What is the weight of the clamp and how does that affect handling? The clamp weighs 1.05 kg, which balances easy positioning during assembly with sufficient mass for stable operation. Which SKU should be referenced when ordering or requesting documentation? Reference SKU B213-4-L for the Kukamet 213 vertical clamp in all orders and technical enquiries. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000 N Vertical Clamp Zinc Plated, 3300 N Holding Force - Kukamet
Robust zinc-plated construction, a 3,000 N maximum clamping pressure and a compact 0.9 kg form factor deliver reliable, space-saving fixturing for light-duty production; order via Metav Werkzeuge or consult their advisors for specification support. Kukamet 212 Vertical Clamp — zinc-plated, 3,000 N clamping pressure The 212 Vertical Clamp is a compact vertical-foot clamping device engineered for secure fixture mounting in workshop benches and production jigs, offering high holding force in a lightweight package. Zinc-plated for enhanced corrosion resistance Compact vertical-foot mounting for space-saving 3,000 N maximum clamping pressure 3,300 N holding force for secure-fixture stability Reliable, measurable clamping performance for repeatable setups The clamp delivers a defined maximum clamping pressure of 3,000 N with a holding force of 3,300 N, providing measurable performance that supports repeatable fixture results. These figures describe the force applied by the clamping spindle and the resultant retention capacity, which helps production planners calculate safety margins and cycle loads. Specified forces reduce uncertainty during fixture design and enable quicker integration into existing clamping systems without over‑engineering. Durable finish and low-maintenance design reduce downtime A zinc-plated surface finish protects the device from corrosion typical in workshop environments, extending service life and lowering upkeep intervals. The combination of a protective coating and simple mechanical design means fewer interventions during routine production. For lighter applications, this treated surface preserves functional surfaces and maintains clamping accuracy over time, translating into fewer stoppages and more consistent part quality. Space-efficient mounting for flexible workshop layouts With a vertical-foot mounting configuration and a compact 0.9 kg body, the unit integrates into tight fixture arrangements while keeping mass low. The actuating spindle is specified as M10x70, which denotes the thread size and spindle length used for engagement; this dimension facilitates straightforward replacement or adaptation within common clamping assemblies. The small footprint supports denser tooling layouts and contributes to faster setup times when changing jobs on the shopfloor. For tailored advice on integrating Kukamet clamping solutions like the 212 into existing rigs, contact Metav Werkzeuge for qualified guidance and ordering support. Technical data SKU: 212-4 GTIN: 8680731501667 Manufacturer: Kukamet Facts Weight: 0.9 kg Maximum clamping pressure: 3,000 N Maximum holding force: 3,300 N Actuating spindle: M10x70 Special features Material / finish: zinc-plated Mounting type: vertical foot Arm: not applicable Special feature: none Category: Spanner eClass: 21041717 ETIM: EC011973 FAQ What maximum clamping pressure does this clamp provide? The 212 Vertical Clamp offers a maximum clamping pressure of 3,000 N and a holding force of 3,300 N, values that support secure retention in light to moderate fixture tasks. Is the clamp protected against corrosion? Yes, the device features a zinc-plated finish that improves corrosion resistance and helps maintain functionality in workshop conditions. How is the clamp mounted and which spindle does it use? Mounting is by a vertical foot; the actuating spindle is specified as M10x70, which indicates the thread and spindle length for integration into fixture assemblies. Is this clamp suitable for heavy industrial machining? The 212 is designed for light to medium fixturing applications where a compact, lightweight clamp is required; its 0.9 kg mass and rated forces make it ideal for workshop jigs rather than high‑mass industrial machining where larger clamps would be necessary. What maintenance is recommended for long service life? Routine inspection and occasional lubrication of moving parts will preserve performance; the zinc-plated finish reduces corrosion-related maintenance for the 212 Vertical Clamp (SKU 212-4). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000 N Vertical Clamp, Horizontal Base, M10x70 Spindle, 0.9 kg, Black Oxide Finish - Kukamet
Take advantage of a compact, robust clamp that delivers 3,000 N clamping force and 3,300 N holding force for reliable fixture work; the horizontal foot mounting and adjustable M10×70 pressure spindle simplify installation and set-up. Order the Kukamet vertical toggle clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertical toggle clamp 211 by Kukamet — 3,000 N clamping force, horizontal foot mounting The Vertical toggle clamp 211 is a compact, lever-operated clamp designed for secure vertical clamping in jigs, fixtures and assembly stations 3,000 N clamping force for secure fixation 3,300 N holding force for reliable work-holding Horizontal foot mounting for stable bench attachment Blackened finish with M10×70 pressure spindle Secure work-holding that speeds up production The vertical toggle design provides a high clamping force relative to its size, translating directly into reduced part movement and fewer rejects. With 3,000 N clamping force and a 3,300 N holding force, the clamp gives measurable stability for repetitive tasks on fixtures and assembly lines. The lever mechanism converts operator input into a consistent clamping result, which improves process repeatability and reduces time spent re-checking setups. This combination of force and repeatability supports efficient machining, welding and inspection operations where consistent component position is essential. Fast installation and simple adjustment for workshop use Fitted with a horizontal foot for a secure base attachment, the clamp is ready to be fixed to flat templates, bases or plates without complex adapters. The M10×70 pressure spindle allows fine adjustment of workpiece height and contact pressure, enabling precise setting for different part geometries. At 0.9 kg, the unit is lightweight enough to be repositioned when layouts change, while remaining stable during operation. These design choices reduce downtime during tooling changes and make the clamp a practical addition to both small workshops and larger production cells. Durable finish and ergonomic handling for daily use The blackened finish provides surface protection and a professional appearance while keeping maintenance straightforward. The lever or toggle action ensures rapid clamping and unclamping with minimal operator effort, increasing throughput and reducing fatigue during repetitive cycles. Built for a workshop environment, the design emphasises durability and ease of handling: components are accessible for inspection and the spindle permits straightforward replacement if required. The overall result is a dependable, low-maintenance clamp that supports consistent quality and a calmer workshop workflow. For tailored advice on integrating the Kukamet vertical toggle clamp 211 into production or for volume supply, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — and request assistance from their technical consultants Technical Data SKU: B211-4 GTIN: 8680731503838 Model: 211 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Clamping force: 3000 N Holding force: 3300 N Weight: 0.9 kg Pressure spindle: M10×70 Special features Mounting: horizontal foot Finish: blackened Type: vertical toggle clamp Operation: lever clamp FAQ What clamping capacity does this clamp offer? The clamp provides a clamping force of 3,000 N and a holding force of 3,300 N, making the Kukamet vertical toggle clamp 211 suitable for robust work-holding tasks. How is the clamp mounted to a fixture or bench? Mounting is via a horizontal foot, allowing the clamp to be bolted directly to flat bases, plates or jig components for a stable installation. Can the contact pressure be adjusted for different parts? Yes. The unit uses an M10×70 pressure spindle, which permits fine adjustment of the contact point and clamping height for varying part geometries. Is the clamp suitable for frequent repositioning or mobile tooling? At 0.9 kg the clamp is compact and light enough for repositioning when tooling layouts change, while still offering secure clamping during operation. What surface protection does the clamp have? The clamp features a blackened finish that improves surface resistance and keeps maintenance requirements low. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000 N Vertical Toggle Clamp 141mm Arm, Massive Holding Arm & Safety Lock, Zinc-Plated - Kukamet
Take advantage of the galvanised construction, massive holding arm and integrated safety lock for consistent clamping in serial production and jig work. Order the vertical clamp 213 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 213 by Kukamet — galvanised vertical lever clamp with safety lock The Vertical clamp 213 is a compact vertical lever clamp designed for secure workpiece holding in jigs, fixtures and assembly stations where repeatability and corrosion resistance are required. Galvanised construction for corrosion protection Massive holding arm with safety lock Max holding force 3,300 N Angle foot mounting for easy integration Consistent performance where it matters The 213 delivers reliable clamping performance through a combination of clamping force 3,000 N and a max. holding force 3,300 N, ensuring components remain secure during machining, welding or inspection steps. The robust lever mechanism translates manual input into a repeatable lock, reducing cycle-time variation and rework. Where repeatability is a priority, this clamp provides the measurable force values that support process stability and throughput improvement. Compact footprint with versatile mounting options Designed for straightforward integration, the device features an angle foot mounting and an arm 141 mm reach, allowing placement in confined fixtures without sacrificing access to the workpiece. At weight 0.93 kg, the clamp is light enough for modular tooling while remaining rigid in operation. These characteristics enable simple retrofitting into existing jigs or positioning on new assembly fixtures, saving fixture redesign time and facilitating flexible production layouts. Built for safety and low maintenance Constructed from galvanised steel with a massive holding arm and a positive safety lock, the clamp minimises accidental release and maintains secure engagement under vibration or incidental loads. Galvanising provides corrosion resistance that extends service life and reduces lubrication intervals. The straightforward mechanical design limits maintenance to routine inspection and keeps downtime low, supporting continuous operation in workshop and production environments. For secure, low-maintenance clamping with the Kukamet vertical clamp 213, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific fixtures and prompt supply Technical Data SKU: 213-4-D-L-C2 GTIN: 8680731502077 Brand: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 141 mm Weight: 0.93 kg Max clamping force: 3,000 N Max holding force: 3,300 N Special features Galvanised material Angle foot mounting Massive holding arm Safety lock Compact lever clamp design FAQ What maximum holding force does the clamp provide? The maximum holding force is 3,300 N for the Kukamet vertical clamp 213, enabling secure retention of components during processing. Is the clamp suitable for fixtures exposed to humidity or splashes? Yes — the galvanised finish on the vertical clamp 213 provides corrosion resistance suitable for workshop environments with occasional moisture exposure. How is the clamp mounted to a fixture or jig? Mounting is via an angle foot, which allows straightforward bolting to plates or fixture bases and simplifies alignment in assemblies. What are the main safety features of the clamp? A positive safety lock and a massive holding arm prevent accidental release and ensure reliable retention under load. Can the clamp be used for welding fixtures and similar heavy-duty tasks? With a clamping force of 3,000 N and a holding force of 3,300 N, the clamp is suitable for many welding and assembly fixtures where mechanical retention is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000 N Vertikalspanner 212, M10x70 Andruckspindel, senkrechter Fuß, 0,9kg - Kukamet
Der Kukamet Vertikalspanner 212 vereint 3.000 N Druckkraft mit 3.300 N Haltekraft in einem kompakten, nur 0,9 kg leichten Gehäuse und bietet damit belastbare Spannlösung für Werkstatt und Fertigung. Nutzen Sie die Kombination aus hoher Spannkraft, robuster Oberfläche und einfacher Montage für präzise Fixierung. Bestellen Sie das Gerät direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Vertikalspanner 212 von Kukamet Der Vertikalspanner 212 sichert Werkstücke vertikal bei Montage und Bearbeitung und ist ausgelegt für präzise, wiederholbare Spannvorgänge in Werkstatt und Produktion. Senkrechter Fuß für stabile Montage Druckkraft bis 3.000 N Haltekraft 3.300 N Andruckspindel M10x70 Gewinde Kompakt und leicht 0,9 kg Hohe Spann- und Haltekraft für sichere Bearbeitung Die Kombination aus 3.000 N Druckkraft und 3.300 N Haltekraft sorgt für zuverlässige Fixierung auch bei anspruchsvollen Fertigungsprozessen. Durch die gezielte Kraftverteilung bleibt das Werkstück während Bohren, Fräsen oder Messen formstabil, was Nacharbeit reduziert und Durchlaufzeiten verkürzt. Diese Eigenschaft macht den Spanner besonders geeignet für Serienfertigung und wiederkehrende Spannaufgaben. Kompakte Bauform erleichtert Einbau und Handhabung Mit einem Gewicht von nur 0,9 kg und der Befestigungsart senkrechter Fuß lässt sich der Spannknebel platzsparend montieren und bei Bedarf schnell transferieren. Die Andruckspindel M10x70 ermöglicht fein dosierten Anpressdruck; die Gewindeausführung sorgt für sichere Kraftübertragung ohne Spiel. Diese Konstruktion erleichtert das Einspannen an Tisch- und Vorrichtungsaufbauten. Robuste Oberfläche für lange Lebensdauer Die Oberfläche Schwarz brüniert bietet Schutz vor Korrosion und reduziert Lichtreflexe am Arbeitsplatz, was die Bedienung vereinfacht. Durch die robuste Ausführung bleibt die Funktionstüchtigkeit auch unter rauen Werkstattbedingungen erhalten. Die langlebige Materialwahl minimiert Verschleiß und senkt so die Gesamtbetriebskosten über den Lebenszyklus. Anwendungsfelder und Zielgruppe Der Spannmechanismus eignet sich für Metallbearbeitung, Montagevorrichtungen und Prüfanwendungen in Klein- und Mittelbetrieben. Entwickelt für Anwender, die Wert auf wiederholbare Präzision legen, bietet dieses Gerät eine kompakte Alternative zu größeren Spannsystemen. Die einfache Mechanik erlaubt auch Anwendern mit geringer Erfahrung eine schnelle Integration in bestehende Arbeitsabläufe. Für präzise Spannaufgaben empfiehlt Metav den Kukamet Vertikalspanner 212; Anfragen zur technischen Eignung oder zur Bestückung Ihrer Werkbank bitte an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 richten, alternativ per WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: B212-4 Marke: Kukamet Bezeichnung: Vertikalspanner 212 Daten Druckkraft max: 3000 N Haltekraft max: 3300 N Gewicht: 0.9 kg Besonderheiten Befestigungsart: senkrechter Fuß Andruckspindel: M10x70 Gewinde Material: Schwarz brüniert Einsatz: Hebelspanner Besonderheit: Keine FAQ Wie hoch ist die maximale Haltekraft des Spanners? Der Kukamet Vertikalspanner 212 bietet eine maximale Haltekraft von 3.300 N, was zuverlässige Fixierung bei typischen Werkstattprozessen ermöglicht. Welche Befestigungsart wird empfohlen? Für den Vertikalspanner 212 ist die Montage mit senkrechtem Fuß vorgesehen, dadurch lässt sich die Spannvorrichtung stabil an Tischen und Vorrichtungen befestigen. Welche Gewindegröße hat die Andruckspindel? Die Andruckspindel des Vertikalspanner 212 ist mit M10x70 Gewinde ausgeführt, was eine feinfühlige Kraftdosierung erlaubt. Für welche Anwendungen ist das Gerät besonders geeignet? Der Kukamet Vertikalspanner 212 eignet sich vor allem für Montage, Bohren und Fräsen kleiner bis mittlerer Bauteile, wo kompakte, wiederholbare Spannkraft gefragt ist. Wie schwer ist das Gerät und welche Vorteile ergibt das Gewicht? Mit einem Gewicht von 0,9 kg lässt sich der Spanner einfach handhaben und flexibel in Werkbänken oder Vorrichtungen einsetzen, ohne große Zusatzlast zu erzeugen.
3000N Vertical Clamp With M10x70 Spindle, Zinc Plated, 1.05kg - Kukamet
Take advantage of robust 3,000 N clamping performance together with a zinc-plated finish and compact 1.05 kg construction for reliable, repeatable fixturing. Order the Kukamet 213 directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet 213 Vertical Clamp — zinc-plated, 3,000 N clamping force Kukamet 213 is a compact vertical clamp engineered for secure workpiece fixation in jigs, fixtures and machine tool setups. Zinc-plated corrosion resistance 3,000 N maximum clamping force 3,300 N maximum holding force Angle-foot mounting for stable fixation Consistent, measurable clamping for production work The vertical clamp delivers a 3,000 N maximum clamping force and a 3,300 N holding capability, specified to ensure secure fixation under load. Clamping force denotes the active pressure applied by the spindle; holding force describes the static retention once the clamp is engaged. The supplied M10x70 spindle combines familiar thread sizing with sufficient engagement length for typical fixture plates, reducing the need for bespoke adaptors and supporting faster set-up times on the shop floor. Built for durability and straightforward installation Constructed with a zinc-plated surface, the clamp resists corrosion in workshop environments while remaining economical to deploy across multiple stations. The angle-foot mounting offers a low-profile, rigid interface to fixture bases and allows repeated installation without complex alignment procedures. At approximately 1.05 kg, the component is light enough for easy handling yet substantial enough to provide vibration-resistant clamping in assembly and machining contexts. Easy integration into existing tooling systems Designed as a compact vertical clamping device, it fits standard fixture layouts and complements both manual and CNC applications where reliable repeatability is required. Assembly is straightforward thanks to the angle-foot base and M10 spindle, and routine maintenance is limited to visual checks and occasional lubrication of moving parts. Supplied via Metav Werkzeuge’s Emmerich centre, availability and consistent quality are supported by a European distribution and quality-filter approach, helping purchasing teams reduce supplier complexity while keeping the production line moving. For robust fixture performance with proven material protection, request technical information or place an order for the Kukamet 213 through Metav Werkzeuge — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: 213-4 GTIN: 8680731502022 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Facts Max. clamping force: 3,000 N Max. holding force: 3,300 N Weight: 1.05 kg Spindle: M10x70 Special features Material: zinc-plated Mounting: angle-foot (Winkelfuß) Type: vertical clamp Special feature: none FAQ What is the maximum clamping capacity of this vertical clamp? The clamp provides a maximum clamping force of 3,000 N and a maximum holding force of 3,300 N for secure fixturing. Which thread and spindle length does the clamp use? The device is fitted with an M10x70 spindle, suitable for standard fixture plates and straightforward replacement parts. Is the clamp suitable for use in a humid workshop environment? Yes — the zinc-plated finish on the Kukamet 213 offers corrosion resistance appropriate for most workshop conditions. How is the clamp mounted to a fixture or baseplate? Mounting is by an angle-foot base, providing a rigid footprint for stable installation on assembly jigs and machine fixtures. Can the clamp be integrated into CNC fixturing systems? The compact design and standard spindle size make it suitable for integration into both manual and CNC fixturing arrangements; Metav Werkzeuge can advise on specific set-ups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000N Vertical Clamp With Safety Lock, M10x70 Actuating Spindle, 0.9kg Blackened Finish - Kukamet
The combination of a 3,000 N clamping capacity, integrated safety lock, and a compact, blackened design makes this clamp a reliable choice for secure vertical workpiece fixation. Benefit from quick setup with the M10x70 spindle and order the unit directly via Metav Werkzeuge or consult our advisors for application support. Kukamet Vertical clamp 212 — vertical clamp with safety lock and M10x70 spindle The Vertical clamp 212 is a vertical mounting clamp designed for secure workpiece retention in machining, assembly and fixture setups. Vertical mounting with foot base Safety locking mechanism included Max clamping force 3,000 N Compact blackened construction Engineered for secure, repeatable clamping The clamp delivers a max clamping force of 3,000 N and a max holding force of 3,300 N, values that translate directly into reliable workpiece retention during machining and handling. The lever-style clamping action provides a rapid mechanical advantage for fast engagement, while the integrated safety lock prevents unintended release under load. These technical characteristics reduce rework and increase process stability, as consistent clamping force minimises movement and vibration during operations. Simple mounting and durable finishing for workshop use Fitted with an M10x70 spindle, the device is prepared for standard fastening and straightforward integration into vertical fixtures or machine tables. The vertical foot mounting offers a compact footprint while the blackened, blued finish provides basic surface protection against corrosion and wear in a workshop environment. At approximately 0.9 kg, the unit combines light handling with robust construction, making it suitable for repetitive clamping tasks where quick repositioning and low mass are advantageous. Improves throughput and operator confidence on the shop floor By ensuring secure fixation with minimal adjustment time, the clamp helps to streamline setup procedures and maintain consistent cycle times. The measurable clamping and holding values support planning for fixture load cases and quality control, offering a rational basis for process decisions. Backing from Metav’s quality filter and distribution centre in Emmerich adds a further layer of assurance, reflecting decades of precision‑tool expertise and wide industrial adoption. Typical uses and safe handling recommendations This lever-style clamp is suited to vertical fixturing, jigs and assembly stations where firm, repeatable retention is required. The safety lock should be engaged once the spindle is brought to the required clamping position to prevent accidental release; inspection of the spindle thread and foot mounting during routine maintenance ensures continued performance. For adaptations or integration into bespoke fixtures, the technical data above provides the measurable parameters needed for engineering decisions. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertical clamp 212 into existing fixtures or to arrange supply from our Emmerich warehouse Technical data Article number: B212-4-L GTIN: 8680731507911 Model: 212 Weight: 0.9 kg Material: blackened (blued) finish Mounting: vertical foot Facts Max clamping force: 3,000 N Max holding force: 3,300 N Spindle: M10x70 Safety lock: yes Special features Safety locking mechanism Vertical foot mounting Lever-style clamping action Compact workshop design FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet Vertical clamp 212 (SKU B212-4-L) provides a maximum clamping force of 3,000 N and a maximum holding force of 3,300 N. How is the clamp mounted? Mounting is via a vertical foot; the unit is designed for vertical installation and secured using the M10x70 spindle. Does the clamp include a safety locking feature? Yes, the clamp is supplied with an integrated safety locking mechanism to prevent accidental release under load. Is the finish suitable for workshop environments? The blackened (blued) finish provides surface protection suited to general workshop conditions; routine maintenance limits wear over time. Can the clamp be used in jigs and fixtures for machining operations? The clamp is intended for fixture and jig applications where repeatable vertical workpiece retention is required; use the technical force values for planning fixture load cases. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3000N Vertical Clamp With Safety Lock, M10x70 Spindle, Zinc Plated, 1.05kg - Kukamet
Take advantage of the combination of robust zinc-plated construction, a 3,000 N pressing capacity and an integrated safety latch for secure, repeatable clamping in production and assembly. Order the part directly via Metav Werkzeuge or contact our consultants for specification support. 213-4-L Vertical clamp by Kukamet — zinc-plated, safety latch The 213-4-L is a vertical clamp engineered for dependable workholding in metalworking, assembly and general workshop fixtures, featuring an angle base for flexible mounting and a pressure spindle for precise contact control. Zinc-plated corrosion protection Safety latch for secure locking Angle base for flexible mounting 3,000 N pressing capacity Consistent clamping force for machining and assembly The vertical clamp delivers a 3,000 N maximum pressing force and a 3,300 N holding force, providing measurable performance for light to medium-duty fixture applications. These values indicate the clamp’s ability to maintain tool or workpiece position during machining, drilling or assembly operations, reducing the need for repeated re-setting. The integrated M10x70 pressure spindle allows controlled contact pressure and fine adjustment of the clamping length, enabling repeatable set-ups on jigs and fixtures. The specification-driven design supports predictable productivity gains and fewer rejected parts in serial tasks. Durable finish and compact handling reduce downtime Constructed with a zinc-plated surface, the clamp resists corrosion in workshop environments and requires little maintenance to retain function over time. At 1.05 kg the device is compact enough for retrofitting into existing fixtures without adding excessive mass, while still providing robust mechanical performance. The combination of a corrosion-resistant finish and a lightweight design simplifies storage and handling, shortening the time needed for equipment changes and lowering the operational overhead associated with upkeep. Safer operation through positive locking and secure mounting A built-in safety latch prevents unintended release of the clamping arm, improving operator safety and preserving set-up integrity during machine cycles or handling. The angle base permits right-angle mounting on fixtures and plates, offering flexible positioning where space or access is limited. Positive locking combined with a secure base reduces the risk of shift or vibration-induced loosening, which is particularly valuable during intermittent loading or when fixtures are moved between stations. Easy integration into workshop fixtures and production cells Designed as a practical clamping component for jig systems, the unit adapts to standard fixture layouts and is suitable for use in metalworking and general workshop contexts. The clamp’s straightforward geometry and standard thread for the pressure spindle allow compatibility with common assembly hardware and tooling plates. As part of a modular approach to workholding, this clamp supports rapid reconfiguration of benches and tools, facilitating lean workflows and efficient changeovers. Contact Metav Werkzeuge for technical advice and to arrange supply of the Kukamet 213-4-L vertical clamp for reliable, standards-based clamping solutions; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 213-4-L GTIN: 8680731502091 Manufacturer: Kukamet Facts Max pressing force: 3,000 N Max holding force: 3,300 N Weight: 1.05 kg Pressure spindle: M10x70 Special features Material: zinc-plated Mounting: angle base Safety latch included Category: clamp FAQ What clamping and holding forces does this clamp provide? The clamp offers a maximum pressing force of 3,000 N and a holding force of 3,300 N, values suitable for light to medium workshop and assembly applications with the 213-4-L. Which mounting options are available for installation? Mounting is via an angle base, allowing right-angle attachment to fixture plates or jigs; the design supports straightforward integration into standard workholding arrangements. Is the pressure spindle adjustable and what is its size? The pressure spindle is M10x70, permitting fine adjustment of contact length and pressure to suit varied workpiece geometries. How does the safety latch improve workshop use? The integrated safety latch secures the clamping position and prevents accidental release during handling or machining, enhancing process reliability when using the clamp. What material finish does the clamp have and how does it affect longevity? The device is zinc-plated, offering corrosion resistance that reduces maintenance needs and helps preserve function in humid or workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
300cc Hand Grease Pump 100 Kg/cm² Press Type, 70x290mm - Vertex
Take advantage of the combination of high-pressure performance and generous reservoir for predictable grease delivery and reduced servicing intervals. Order the unit directly via Metav Werkzeuge or consult the team for application advice and fast supply from our Emmerich warehouse. LA-2403 Hand lubricant pump by Vertex — manual push-down pump, 300 c.c, 100 kg/cm² The LA-2403 hand-operated push-down lubricant pump delivers targeted grease at workshop and industrial lubrication points with straightforward manual control. Manual push-down action for grease application 300 c.c capacity for extended service intervals 100 kg/cm² peak pressure for heavy-duty use Dependable lubrication that reduces downtime The LA-2403 is engineered for consistent, repeatable grease supply to bearings, joints and service points. With a 300 c.c reservoir, the dispenser lowers refill frequency, supporting uninterrupted workflows in maintenance bays. A rated output of 100 kg/cm² provides the force needed for thicker lubricants, enabling effective penetration into tight fittings and reducing the need for repeated applications. This reliability translates into measurable operational efficiency. Easy operation and compact footprint for busy workshops A simple manual push-down mechanism gives precise control without electrical power or complex fittings, making the pump suitable for mobile service trolleys and fixed maintenance stations alike. The compact dimensions 70x290mm make storage and handling straightforward, while the straightforward actuation minimises training time. Where rapid, on-demand lubrication is required, the pump’s design supports quick intervention and steady delivery under sustained use. Practical compatibility and clear maintenance benefits Designed specifically for grease application, the push-down operation is appropriate for a range of common industrial greases and routine workshop tasks. The reservoir volume helps reduce interruptions for topping up, and the visible construction aids inspection routines. Combined with Vertex’s established manufacturing, the unit represents a pragmatic choice for teams seeking conservative investment with dependable performance and a clear maintenance benefit. Choose the Vertex LA-2403 for reliable grease delivery—contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply. Technical Data SKU: LA-2403 GTIN: 4061905091810 ECLASS: 23069090 Manufacturer: Vertex Core specifications Capacity: 300 c.c Maximum pressure: 100 Kg/cm² Dimensions: 70x290mm Design & features Operation: Push-down operation (for grease) Type: Hand lubricant pump Intended use: Workshop and industrial lubrication points FAQ What types of lubricants can be used with this pump? The LA-2403 hand lubricant pump by Vertex is intended for grease application; its push-down operation is suitable for common industrial greases used in bearings and joints. What does a maximum pressure of 100 kg/cm² mean in practice? A peak rating of 100 kg/cm² indicates the pump’s ability to deliver grease under high resistance, helping the LA-2403 to force thicker lubricants into tight fittings and long grease lines. How often must the reservoir be refilled during continuous use? With a 300 c.c reservoir, refill intervals are extended compared with smaller dispensers, reducing service interruptions during routine maintenance tasks. Is the pump suitable for mobile maintenance trolleys? Yes, the compact dimensions (70x290mm) and manual operation make the Vertex LA-2403 well suited to mobile service trolleys and constrained workshop spaces. Are specialised fittings required to use the pump? The LA-2403 is designed for straightforward workshop integration with standard lubrication points; compatibility with specific fittings should be confirmed for specialised systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300cc Hand Pump For Machine Oil, 60 Kg/cm² Pressure Capacity - Vertex
Reliable press-type lubrication with a 300 cm³ reservoir and a maximum delivery pressure of 60 kgf/cm² provides efficient oiling for production equipment and maintenance benches; the compact 70 × 290 mm design reduces interference in confined work areas and lowers downtime risk. Order the LA-1403 via Metav Werkzeuge or consult our technical advisors for specification matching. LA-1403 – Vertex hand lubricant pump, 300 cm³ reservoir, 60 kgf/cm² A LA-1403 hand lubricant pump for press-type dispensing of machine oil, ideal for workshop maintenance and machine lubrication tasks *Press-action dispensing for machine oil *300 cm³ reservoir for extended operation *Up to 60 kgf/cm² pressure for powerful delivery *Compact 70 × 290 mm footprint for tight spaces Efficient lubrication that keeps machines running The press-action mechanism delivers a consistent, metered flow suitable for regular maintenance cycles. With a 300 cm³ reservoir, the unit reduces refill frequency and supports longer uninterrupted service intervals. The rated maximum pressure of 60 kgf/cm² (≈5.9 MPa) ensures sufficient force for oil to reach bearings and tight lubrication points, translating into quicker application and less machine downtime. This technical efficiency benefits production schedules by shortening maintenance windows and improving overall equipment availability. Small footprint, straightforward operation and predictable output A compact 70 × 290 mm footprint allows installation next to lathes, milling machines or service benches where space is limited. The pump’s stroke delivers approximately 2 cm³ per stroke, enabling predictable lubricant metering for routine tasks and simpler inventory planning for consumables. Designed for manual, press-down operation, the unit requires minimal training and reduces operator fatigue compared with awkward or improvised dispensing methods. The clear physical design supports rapid refilling and inspection, contributing to reliable workshop workflows. Purpose-built for machine oil and industrial use Specified explicitly for machine oil, the pump is tailored to common workshop lubricants and industrial maintenance needs. Built under the Vertex name, the construction emphasises robust components and straightforward mechanics that suit repetitive use in trade and industry environments. The combination of powerful delivery, measured output and compact design positions the pump as a practical, durable solution for routine lubrication tasks in manufacturing, repair and maintenance contexts. Discuss the Vertex LA-1403 with Metav Werkzeuge for tailored lubrication solutions from our Emmerich warehouse—contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fit and delivery options Technical data Article number: LA-1403 GTIN: 4061905092732 ECLASS: 23069090 Facts Capacity: 300 cm³ (300 ml) Max. pressure: 60 kgf/cm² (≈5.9 MPa) Dimensions: 70 × 290 mm Dispensed volume per stroke: 2 cm³/stroke Special features Type: press-down for machine oil Brand: Vertex Intended use: lubrication dispensing for machine oil FAQ What type of lubricant is this pump designed for? The pump is specified for machine oil and is optimised for dispensing common workshop oils used in equipment maintenance. How much oil does each stroke deliver? Each press delivers approximately 2 cm³ per stroke, providing predictable metering for regular lubrication tasks. Can the pump reach tight lubrication points? With a maximum of 60 kgf/cm², the unit provides the pressure needed to push oil into bearings and confined lubrication channels in typical maintenance scenarios. Is the reservoir large enough for continuous workshop use? The 300 cm³ reservoir reduces refill frequency and is suitable for routine maintenance cycles in small-to-medium workshop environments. What are the physical dimensions and suitability for constrained workspaces? The pump measures 70 × 290 mm, offering a compact footprint that fits beside machines and on crowded service benches. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Clamping Screw M16x2P, Heat‑Treated Steel - Vertex
Benefit from a robust combination of precision thread geometry, durable heat-treated steel construction and a 300 mm overall reach to ensure secure fixture in demanding clamping tasks; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. Clamping screw — M16×2P thread, 300 mm length (Vertex) Clamping screw for secure fixture tasks in metalworking and general workshop applications, featuring a precision M16×2P thread and heat-treated steel construction for repeated use. Robust heat-treated steel construction M16×2P precision thread 300 mm overall length for deep clamping Compatible with standard fixtures Consistent clamping performance for production environments The fastener is engineered to provide consistent clamping force across repetitive cycles, reducing the need for frequent retightening. With a precision M16×2P thread and a measured length of 300 mm, the design supports reliable axial engagement in a variety of jigs and fixtures. Precision of the thread form contributes directly to setup speed and positional repeatability, which in turn minimises machine downtime and supports steady throughput in small-batch and serial production runs. The combination of exact threading and solid construction delivers a pragmatic balance of accuracy and service life. Durable material treatment explained for long service life Constructed from heat-treated steel, the component resists wear and maintains clamping integrity under cyclic load. Thermal treatment increases surface hardness and enhances fatigue strength without compromising the component’s dimensional stability. The measured weight of 0.38 kg reflects a substantial cross-section that helps absorb operating stresses while remaining manageable for manual handling during setup. For applications where fixture reliability is critical, this treatment ensures the fastener maintains its mechanical properties over extended service intervals. Integration into workshop workflows and supply reliability Designed for straightforward incorporation into existing fixturing systems, the fastener interfaces with common mating parts via its standardised M16×2P thread, simplifying parts procurement and maintenance planning. Its specification supports compatibility with typical workshop torque tools and clamping hardware, enabling quick replacement and minimal inventory complexity. Supplied by a trusted manufacturer, the component contributes to a predictable supply chain and consistent tool performance, supporting efficient maintenance cycles and helping to keep production lines operating without unexpected interruptions. For application guidance, availability details or to arrange delivery from Metav Werkzeuge, please contact our consultants who can advise on suitability, lead times and integration options for Vertex clamping screws Technical data SKU: 13512M GTIN: 4061905088520 Manufacturer: Vertex Core technical data Thread: M16×2P Length: 300 mm Weight: 0.38 kg Materials and special features Material: Heat-treated steel ECLASS: 21022190 Brand: Vertex FAQ What thread specification does the clamping screw use? The clamping screw is specified with an M16×2P thread, providing a standard metric form for secure engagement. What is the overall length and weight of this fixing element? The fixing element measures 300 mm in length and has a weight of 0.38 kg, balancing reach with mechanical stability. Which material and treatment are used for enhanced durability? Manufactured from heat-treated steel, the product from Vertex is treated to improve hardness and fatigue resistance for repeated clamping operations. Is this component suitable for standard workshop fixtures? Yes, the standard M16×2P thread and robust construction make it compatible with common fixtures and torque tools used in workshops. How is the component identified for ordering? Order using the SKU 13512M or the GTIN 4061905088520 to ensure the correct Vertex clamping screw is supplied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Clamping Screw M18x2.5P, Heat-Treated Steel - Vertex
Engineered in heat-treated steel with an M18 x 2.5 metric thread and a 300 mm reach, this clamping solution provides dependable, repeatable fixture performance and reduced maintenance intervals. Benefit from robust construction and consistent axial positioning for steady production flow. Order directly via Metav Werkzeuge or consult our technical advisors for selection support. Clamping Screw 13612M – M18 x 2.5, 300 mm (Vertex) A robust Clamping Screw 13612M, designed for secure fixture use in tooling and industrial clamping applications. Heat-treated steel for enhanced strength M18 x 2.5 pitch metric thread 300 mm length for deep clamping reach Stable 0.5 kg mass for reliable engagement Consistent clamping life and measurable benefits Built from heat-treated steel, the Clamping Screw 13612M delivers long-term durability and repeatability in repetitive fixture operations. Heat treatment increases hardness and fatigue resistance, which reduces wear on the thread and contact faces and prolongs service intervals. The result is fewer unscheduled stops and a more predictable maintenance schedule, supporting continuous production and improved overall equipment effectiveness. Straightforward compatibility with standard metric fixtures The M18 x 2.5 specification ensures direct compatibility with standard M18 internal threads commonly used in tooling blocks and fixture plates. The 2.5 mm pitch provides a balance between fine axial adjustment and load-bearing capacity, enabling precise positioning without accelerated thread wear. Using a standard metric thread reduces stocking complexity and simplifies interchangeability across suppliers and existing clamping systems. Extended reach reduces setup complexity With a 300 mm overall length and a compact 0.5 kg mass, this design offers a deep clamping reach and stable engagement for thicker assemblies or layered fixtures. The extended reach eliminates the need for multiple adapters or extensions in many applications, decreasing set-up time and lowering the risk of assembly errors. For operations that require reliable access across a long clamping span, the component provides a pragmatic solution that supports faster fixtures and less handling. For reliable Vertex clamping components and local supply from Metav Werkzeuge in Emmerich, contact our advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and prompt delivery via our European distribution. Technical Data SKU: 13612M GTIN: 4061905093326 Manufacturer: Vertex Facts Thread: M18 x 2.5 pitch Length: 300 mm Weight: 0.5 kg EClass: 21022190 Special features Material: Heat-treated steel Metric thread for standard fixture systems Technical drawing and detail image available FAQ What thread does the clamping screw use? The component features a metric M18 x 2.5 thread, matching standard M18 internal threads in common fixture systems. Is the material suitable for heavy-duty use? Manufactured from heat-treated steel, the clamping screw offers increased hardness and fatigue resistance suitable for demanding industrial clamping tasks. Will the 300 mm length fit standard fixtures? The 300 mm overall reach accommodates thicker assemblies and layered fixtures; compatibility depends on available clearance and internal thread depth of the mating part. Can this clamping screw be interchanged with other M18 components? Yes. The standard M18 x 2.5 pitch is intended for interchangeability with other metric M18 components providing the mating threads conform to the same dimension standards. Are installation aids or drawings available? A technical drawing and detailed product images are provided to aid correct installation and integration into fixture layouts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Clamping Screw M20x2.5P, Heat-Treated Steel - Vertex
Taking advantage of the heat-treated steel construction and the M20x2.5P thread, this clamping screw delivers consistent holding force and long service life in industrial fixtures; order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw 13712M – M20x2.5P, 300 mm, Vertex The Clamping screw 13712M is a robust heat-treated steel fastener intended for industrial clamping and fixture applications, providing dependable contact force in production environments. Heat-treated steel construction M20x2.5P standard thread 300 mm length for deep clamping Robust clamping for heavy-duty fixtures Built from heat-treated steel, this clamping fastener is designed to withstand the mechanical stresses of repeated tightening and heavy loads. The thermal treatment increases hardness and reduces wear, which translates directly into fewer replacement intervals and lower maintenance effort. As a result, the fastener maintains consistent frictional behaviour and reliable seating in clamps and jigs, supporting uninterrupted production runs. The 0.65 kg mass contributes to a stable feel during manual handling while remaining manageable for assembly and replacement tasks. Precise thread form that speeds setup and reduces play The M20x2.5P thread provides a widely used metric pitch that ensures predictable axial movement per turn, simplifying preload adjustment and torque control in clamping systems. A standard thread form also aids interchangeability with commercially available nuts and threaded inserts, reducing the need for bespoke components. This predictability shortens setup time and helps maintain a constant clamping force, which improves machining accuracy and limits vibration transfer to the workpiece. The SKU 13712M identifies the exact configuration for procurement and inventory tracking. Length and weight balanced for practical installation With a 300 mm overall length, the fastener reaches into deeper fixtures where extended engagement is required without compromising rigidity. The combination of length and mass is optimised to offer sufficient lever for tightening while keeping the component compatible with common clamping assemblies. Durability and straightforward integration make this fastener a sensible choice for workshops and production lines seeking dependable, long‑term performance from standardised components. For supply and tailored advice on Vertex clamping solutions such as the 13712M, contact Metav Werkzeuge in Emmerich by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability for specific fixtures Technical data Article number: 13712M GTIN: 4061905088537 Manufacturer: Vertex Specifications Length: 300 mm Thread: M20x2.5P Weight: 0.65 kg Materials & features Material: heat-treated steel Industrial clamping application Standard metric thread for interchangeability FAQ What is the main material of this clamping screw? The clamping screw is made of heat-treated steel, chosen for wear resistance and long service life. Which thread standard does the fastener use? The fastener uses an M20x2.5P metric thread, suitable for standard nuts and threaded inserts. Is the 13712M suitable for deep clamping setups? Yes, the 300 mm length of the 13712M is intended for deeper fixtures where extended engagement is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Extension Sleeve MK4 to MK5 Hardened Ground, DIN 2187 - TECWERK
Take advantage of a hardened, ground construction and DIN 2187 conformity to maintain spindle accuracy while extending reach; the MT4→MT5 taper pairing and 300 mm overall length deliver reliable tool support and repeatable concentricity in metalworking applications. Order the extension sleeve directly via Metav Werkzeuge or consult the team for application advice. Morse taper extension sleeve MT4×MT5 — TECWERK, hardened and ground, DIN 2187, 300 mm The Morse taper extension sleeve MT4×MT5 provides a hardened, ground sleeve for extending Morse taper tooling, optimised for metalworking and drilling operations where increased reach and maintained accuracy are required DIN 2187 standard compliance Hardened and ground inside and out 300 mm overall length for extended reach 63 mm outer diameter for stable support Maintain machining accuracy over extended reach The hardened and precisely finished inner and outer surfaces are designed to preserve concentricity when a tool is mounted into a smaller spindle via a larger taper. Conformity with DIN 2187 ensures a standardised fit and predictable performance across compatible tooling systems. By combining a controlled MT4 outside taper with an MT5 inside taper, the sleeve reduces radial runout and vibration compared with ad hoc adapters, which helps to secure cutting performance and surface quality in everyday production. Built for industrial stability and repeatability Robust dimensions and surface treatment are the basis for long-term stability: an outer diameter of 63 mm and an overall length of 300 mm provide the mass and support needed for longer overhangs, while the L1 measurement of 182.5 mm defines the usable insertion depth. The fully hardened and ground execution resists wear at contact faces, so the adapter keeps its tolerance profile through repeated tool changes and heavy-duty cycles. This reliability benefits workshops seeking consistent, measurable results from their taper tooling. Simple integration and practical handling in the workshop The sleeve is intended for tools with a Morse taper interface and works as a direct mechanical solution to increase reach without compromising interchangeability; standard compliance allows straightforward replacement and compatibility checks. Install and remove the adapter using standard practice for Morse tapers—ensure clean, dry contact faces and verify seating to achieve optimal concentricity. For complex setups or specific material challenges, technical consultation is available to align the sleeve’s properties with the intended application. For application advice, stock availability and fast delivery from Emmerich, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TECWERK MT4×MT5 extension sleeve and compatibility with existing tooling. Technical Data Article number: 2000832367NW Label: Verlängerungshülse DIN 2187 MT4×MT5 gehärtet und geschliffen Manufacturer: TECWERK Facts Standard: DIN 2187 Overall length (L2): 300 mm Usable insertion length (L1): 182.5 mm Outer diameter (D): 63 mm Special features Hardened and ground inside and out Outside taper: MT4 (Morse taper 4) Inside taper: MT5 (Morse taper 5) For tools with Morse taper interfaces Packaging unit: 1 FAQ What standard does this extension sleeve conform to? The extension sleeve conforms to DIN 2187, ensuring standardised dimensions and fit for compatible Morse taper tooling. Can this sleeve be used with MT4 spindles and MT5 tools? Yes, the sleeve is designed with an MT4 outside taper and an MT5 inside taper to accept MT5 taper tools in MT4 applications while maintaining accuracy. What are the key dimensions to check for fitment? Relevant dimensions include the overall length 300 mm, usable insertion length 182.5 mm, and outer diameter 63 mm; these help assess reach and support for the application. Is the surface finish suitable for heavy-duty workshop use? The adapter’s fully hardened and ground surfaces are intended to resist wear and retain concentricity under frequent tool changes and industrial use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
300mm Magnetic Chuck Round Surface, 78mm Height, 30.4kg - Vertex
The combination of reliable holding performance, space-saving low profile and a stabilising mass ensures consistent machining results; order the unit directly via Metav Werkzeuge or consult our specialists for selection advice VGD-12 Round Magnetic Chuck – 300 mm diameter, 78 mm height (Vertex) The VGD-12 Round Magnetic Chuck is a compact clamping device for secure fixation of ferromagnetic workpieces on milling and grinding machines 300 mm diameter for medium-sized workpieces 78 mm compact height for low-profile setups 30.4 kg mass for vibration damping and stability Stable, accurate clamping for medium parts The VGD-12 delivers precision clamping for a wide range of medium-sized components thanks to its 300 mm diameter. Magnetic holding eliminates many mechanical clamps, allowing for unobstructed access to the workpiece and reducing repositioning time. For machining operations where repeatable alignment and uniform contact are crucial, the magnetic surface provides even attraction across the contact area, improving process consistency and reducing the need for frequent adjustments. This results in measurable time savings over repeated setups. Low-profile design that preserves machine clearance With a total height of 78 mm, the chuck is designed for applications with limited spindle or table clearance. The compact profile helps maintain the machine tool’s working envelope while allowing secure clamping at a low centre of gravity. This design advantage supports effective tool engagement and reduces the chances of collisions or interference with fixtures, making the chuck suitable for tight or nested arrangements on the machine table. Mass and build quality that reduce vibration and improve finish Weighing 30.4 kg, the device’s inherent mass contributes to vibration damping during cutting and finishing operations. Increased stability during machining lowers chatter and enhances surface finish without additional supports. The robust construction supports steady cutting conditions which, in turn, can extend cutter life and reduce rework rates. For operations that prioritise consistent surface quality, the stability provided by the chuck is a tangible production benefit. Practical integration in the workshop and procurement reliability Supplied under SKU VGD-12 with GTIN 4061905086632, this round magnetic chuck fits standard table setups and is easy to identify for inventory and procurement processes. Delivered through Metav Werkzeuge, the product benefits from a European quality filter and dependable logistics from Emmerich, supporting uninterrupted supply to industry and trade. The clear identification and compact footprint simplify planning for storage and machine allocation in busy shops. Consult Metav Werkzeuge about the Vertex VGD-12 for precise magnetic clamping solutions and availability from our Emmerich stock, or ask our consultants for help selecting the right chuck for specific machining tasks Technical data SKU: VGD-12 GTIN: 4061905086632 Product: Round magnetic chuck Manufacturer: Vertex Facts Diameter: 300 mm Height: 78 mm Weight: 30.4 kg eClass: 21020809 Special features Round design Compact low-profile height High mass for vibration damping Asset image available: vgd-06-main.PNG FAQ What are the key dimensions of the chuck? The VGD-12 round magnetic chuck has a diameter of 300 mm and a height of 78 mm, making it suitable for medium-sized setups where a low profile is required. Is the chuck suitable for heavy-duty machining? The chuck’s mass of 30.4 kg provides stabilising weight that helps reduce vibration during machining; assessment of suitability for specific heavy-duty operations should consider machine capacity and cutting parameters. Which workpiece materials can be held by this chuck? Magnetic chucks are generally intended for ferromagnetic materials; for confirmation on compatibility with particular alloys or parts, refer to the product specifications and consult technical guidance. How is the product identified for ordering and inventory? This device is listed under SKU VGD-12 with GTIN 4061905086632 for straightforward procurement and stock management. Can the chuck be used on different machine tables? The round design and compact height allow versatile placement on standard machine tables; ensure the table mounting and clamping arrangement are suitable for the intended operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Precision Cut And Grind Machine For Round Bars, 3600rpm, Accuracy 0.1mm - Vertex
Take advantage of the combination of high rotational speed and precision accuracy to maintain a steady production flow with minimal rework; the compact footprint and robust construction support stable processing of round bars. Order the VEC-300G directly via Metav Werkzeuge or ask our consultants if needed. Vertex VEC-300G Precision cutting and grinding machine — 3600 rpm, compact footprint The VEC-300G is a precision cutting and grinding machine for round bars, engineered for accurate end finishing and efficient throughput in small to medium production settings High-speed 3600 rpm for efficient machining Compact footprint 600x550x660 mm for tight spaces Accuracy 0.1 for repeatable results Robust 89 kg construction for reduced vibration Consistent throughput through engineered speed and control The unit combines a 3600 rpm spindle with a design focused on steady material feed to maximise throughput without compromising finish quality. High rotational speed reduces cycle times on short cuts, while the machine's mechanical stability maintains consistent results during repetitive operations. For manufacturers, this translates into predictable output and fewer interruptions, supporting lean workflows and improved capacity planning. Stable support and compact installation save workshop space With a compact footprint of 600x550x660 mm and a machine mass of 89 kg, the system occupies little floor area while offering a stable processing platform. The substantial weight dampens vibrations that commonly cause surface imperfections on turned or ground faces, so operators benefit from a cleaner finish and less time spent on rework. This configuration is particularly advantageous where floor space is limited but component quality must remain high. Accurate finishing and simple interpretation of results The machine delivers an accuracy 0.1, providing a reliable baseline for dimensional control when preparing round bars for assembly or secondary operations. Accuracy in this context means reproducible results across batches, reducing downstream inspection time and scrap. Technical terms such as accuracy and rotational speed are presented here to clarify how the machine influences part tolerance and surface quality for teams that may not be familiar with machining metrics. Practical design for production and workshop environments Designed specifically for round bars, the unit integrates functions for cutting and subsequent surface refinement in one compact station. This reduces handling between machines and shortens the overall process chain. The combination of precision capabilities and a small installation footprint supports both small workshops looking to upgrade capabilities and production lines needing a reliable periphery machine to maintain part conformity. Contact Metav Werkzeuge today to discuss how the Vertex VEC-300G's high-speed precision and compact design can be integrated into current production workflows and to arrange tailored advice from our consultants. Technical Data Article number: VEC-300G GTIN: 4061905084829 Manufacturer: Vertex Facts Dimensions: 600x550x660 mm Weight: 89 kg Speed: 3600 rpm Accuracy: 0.1 Special features Precision cutting and grinding for round bars Compact footprint suitable for benchtop or small shop installations Robust construction for reduced vibration and improved surface finish FAQ What materials can be processed with this machine? The VEC-300G is specified for cutting and grinding of round bars; material compatibility should be verified against tooling choices and operational parameters for each application. How does the machine's accuracy affect production quality? An accuracy rating of 0.1 supports consistent dimensional results, which reduces inspection time and the need for corrective machining on subsequent operations. Is the VEC-300G suitable for small workshops? Yes, the compact dimensions and integrated cutting-plus-grinding design make it well suited to shops with limited floor space that require precise finishing capability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Rotary Dividing Table Tiltable Horizontal/Vertical, 65mm Spindle Bore, 16mm T-Slot - Vertex
The combination of a 300 mm working diameter, tiltable orientation and 16 mm T-slots ensures stable, versatile positioning for demanding machining tasks; order the VUT-300 directly via Metav Werkzeuge or ask our consultants if needed. VUT-300 tiltable rotary table by Vertex — 300 mm diameter, horizontal/vertical The VUT-300 is a precision rotary table designed for tiltable setups in horizontal and vertical machining applications, offering a compact footprint and robust mass for accurate, repeatable operations. 300 mm precision rotary table Tiltable for horizontal and vertical use 16 mm T-slots for secure fixturing Robust 108 kg mass for stability Stable platform for high-accuracy work The substantial mass of the device, specified at 108 kg, creates a stable foundation that reduces vibration during cutting and improves surface finish consistency. A 300 mm working diameter provides a balance between a compact footprint and usable clamping area, allowing fixtures to be positioned close to the spindle for reduced overhang and better concentricity. Stability here translates directly into repeatable machining results and fewer set-up adjustments, which benefits production throughput and quality assurance. Flexible orientation to expand machining options The tiltable design enables both horizontal and vertical operation without the need for multiple dedicated fixtures, increasing workshop versatility. By permitting angular setups, the table simplifies tasks such as face milling, angular drilling and complex multi-axis clamping while keeping the workpiece in a fixed, controlled reference. This flexibility reduces cycle times by minimising repositioning and supports more efficient batching of diverse components in milling and drilling centres. Secure fixturing and straightforward integration Equipped with 16 mm T-slots, the unit accepts common clamping systems and modular fixturing, enabling secure attachment of vices, fixtures and custom adapters. The 65 mm central bore facilitates alignment and accommodates through-shaft clamping or auxiliary fixturing components where required. Clear, standardised interfaces make it straightforward to integrate the table into existing tooling sets, helping to preserve fixture investment while expanding capability. Compact dimensions with industrial-grade usability With a nominal footprint of 300 x 551 x 178 mm, the rotary table fits easily on many machine tables without sacrificing working area. The compact form, combined with the table’s mass and T-slot layout, supports precise indexing and stable operations even under moderate cutting loads. The design suits jobbing shops and production environments that require reliable, repeatable positioning without the footprint of larger rotary heads. Contact Metav Werkzeuge to discuss how the Vertex VUT-300 can be integrated into existing machining setups and to arrange supply from our Emmerich quality hub; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VUT-300 GTIN: 4061905093739 EClass: 36600610 Manufacturer: Vertex Numeric data Diameter: 300 mm Weight: 108 kg Dimensions: 300 x 551 x 178 mm Central bore: 65 mm T-slot width: 16 mm Features Type: Rundteiltisch (rotary table) Orientation: tiltable, horizontal/vertical T-slots: 16 mm for standard fixture systems SKU: VUT-300 FAQ What machining tasks is this table suited for? The Vertex VUT-300 rotary table is suited to milling, drilling and angular set-ups where repeatable indexing and stable clamping are required, particularly in small to medium-sized production runs. How are workpieces secured to the table? Workpieces are clamped using the 16 mm T-slots and the central 65 mm bore; standard clamps and modular fixture components are compatible with the table’s layout. What are the physical dimensions and mass of the unit? The rotary table has a working diameter of 300 mm, a nominal footprint of 300 x 551 x 178 mm and a mass of 108 kg, providing a stable base for machining operations. Can the table be used both horizontally and vertically? Yes, the unit is designed to be tiltable for both horizontal and vertical orientations, enabling flexible setup options without additional dedicated fixtures. Is the VUT-300 compatible with existing clamping systems? Yes, the T-slot configuration and central bore are compatible with common clamping systems, making integration with existing fixtures straightforward. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Runout Test Mandrel SK50 Ø40 Hardened Gauge Steel 0.002mm Runout, DIN ISO 7388-1 - Metav IndustryLine
Take advantage of ultra‑fine runout control and robust construction to keep spindle alignment and inspection reliable; the combination of 0.002 mm runout accuracy, hardened gauge steel and DIN ISO 7388‑1 conformity ensures consistent measurement results. Order the control mandrel via Metav Werkzeuge or consult the technical team for tailored advice. Control Mandrel SK 50 (SK50‑D40‑300L) – 0.002 mm runout accuracy, hardened gauge steel The Control Mandrel SK 50 is a precision checking mandrel for runout inspection and alignment of machine spindles with an SK50 taper, designed for demanding workshop and inspection applications. 0.002 mm runout accuracy Hardened gauge steel, HRC 58 SK50 taper for spindle alignment Compliant with DIN ISO 7388‑1 Reduce rework with micrometre‑grade runout control The mandrel offers a guaranteed runout accuracy of 0.002 mm, which translates into measurable reductions in rework and setup time when aligning spindles or verifying chuck concentricity. Constructed from hardened gauge steel, the shaft resists wear and preserves datum integrity over repeated use; the specified HRC 58 hardness supports long service life and repeatable contact conditions. For inspection routines that demand repeatability, the low runout figure and documented cylindricity <0.003 mm provide a solid basis for process decisions and traceable quality assurance. Practical benefits for alignment and inspection workflows The SK50 taper and a nominal shaft diameter of Ø40 mm give the mandrel direct compatibility with standard SK50 spindle noses and holding fixtures, simplifying insertion and removal during alignment tasks. With a working length of 300 mm, the mandrel balances reach and stiffness to enable accurate checks across typical spindle depths without excessive deflection. The robust mass (approx. 8 kg) contributes to stable seating during measurement, reducing vibration sensitivity and supporting faster, more confident adjustments in the machine tool environment. Designed for workshop durability and certified form Engineered to the DIN ISO 7388‑1 standard, the mandrel is produced and finished to the tolerances expected in professional metrology environments. The hardened finish and controlled geometry make the mandrel suitable as a reference shaft for concentricity and runout verification, and the documented features support integration into formal inspection plans. Where traceability and conformity matter, the mandrel’s specifications allow straightforward documentation within existing quality systems. For reliable spindle alignment and reproducible runout checks, choose the Metav IndustryLine Control Mandrel SK 50 (M318.975) — contact Metav Werkzeuge in Emmerich for technical consultation and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M318.975 GTIN: 4054469184722 Type: SK50‑D40‑300L Label: Control Mandrel SK 50, L = 300 mm, runout accuracy 0.002 mm Facts Runout accuracy: 0.002 mm Cylindricity: <0.003 mm Length (usable): 300 mm Diameter: Ø40 mm Weight: 8 kg Hardness: HRC 58 Standard: DIN ISO 7388‑1 Special features Material: hardened gauge steel Application: runout inspection and spindle alignment with SK50 taper Mount: SK50 Finish: hardened, precision ground FAQ What applications is this mandrel intended for? The mandrel is intended for runout inspection and alignment of machine spindles and chucks; the SK50 taper makes it suitable for SK50‑mount spindles and fixtures, as specified for the Control Mandrel SK 50 (M318.975). How precise is the runout performance? Runout performance is specified at 0.002 mm, providing high precision for verification tasks where concentricity and minimal eccentricity are critical. Is the mandrel suitable for regular workshop use? Yes. The hardened gauge steel construction and HRC 58 rating mean the mandrel is built for repeated workshop use while maintaining measurement integrity. Does the mandrel comply with recognised standards? The product is manufactured to conform with DIN ISO 7388‑1, ensuring its geometry and tolerances meet established industry requirements. What are the key dimensional data to consider when selecting this mandrel? Key dimensions are a shaft diameter of Ø40 mm, usable length of 300 mm and SK50 mount; total weight is approximately 8 kg, which aids stable seating during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Tilting Precision Rotary Table Horizontal/Vertical, Three-Point Indexing MT-4 - Vertex
Combine the 300 mm tilting rotary table with its precise angle indexing and robust MT-4 taper to increase setup flexibility and machining accuracy; order the VUT-12 directly via Metav Werkzeuge or consult our specialists for application advice. VUT-12 tilting rotary table — 300 mm diameter, MT-4 mounting, Vertex The VUT-12 is a compact tilting rotary table for horizontal and vertical machining that provides precise angular indexing and secure fixture attachment for versatile production and toolroom use. *300 mm working diameter *Tilts for horizontal and vertical use *MT-4 taper for spindle mounting *T-slot 16 mm for secure clamping Precise angle control that reduces setup time The tilting rotary table is designed to deliver consistent precision for indexed operations. With a per-spindle-revolution feed of 1° tilt and 4° table rotation, the device enables predictable angular shifts when adjusting via the handwheel. The integrated scale offers fine indication — 2' for tilt and 10" for the table — allowing repeatable positioning during multi-axis setups. This level of control reduces trial runs and tool adjustments, which improves throughput and lowers scrap rates in batch production. Flexible fixturing and quick integration into machining centres A compact footprint and a 300 mm diameter table make this solution suitable for toolrooms and production cells alike. The MT-4 taper mount allows straightforward connection to common spindle or tailstock interfaces, while the T-slot 16 mm top provides secure clamping of fixtures, vices or bespoke workholding. Because the unit is operable in both horizontal and vertical orientations, the same device supports cross-drilling, angular milling and indexing tasks without repeated remounting, saving time and preserving datum alignment across operations. Robust design for reliable workshop performance Constructed for stable operation under regular workshop use, the rotary table weighs 108 kg, giving it a steady base for machining forces. The compact external dimensions 300 x 551 x 178 mm and a height of 319 mm allow integration into limited spaces while maintaining accessibility for tool changes and adjustments. The combination of solid mass and precise indexing contributes to predictable surface quality and repeatability over long production runs, supporting efficient workflows and dependable output. Discuss how the Vertex VUT-12 with its 300 mm tilting table and MT-4 mounting can streamline machining processes; contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VUT-12 GTIN: 4061905092879 ECLASS: 36600610 Manufacturer: Vertex Facts Diameter: 300 mm Dimensions: 300 x 551 x 178 mm Height: 319 mm Weight: 108 kg T-slot: 16 mm Special features Design: Horizontal / vertical, tilting rotary table Mounting: MT-4 taper Indexing per spindle revolution: 1° tilt / 4° table rotation Scale reading: 2' (tilt) and 10" (table) FAQ What degree of angular movement does the table provide per spindle revolution? Per spindle revolution the table advances 1° for tilt and 4° for table rotation, enabling controlled angular indexing with the VUT-12 tilting rotary table from Vertex. Which mounting interface is used for connection to spindles or tailstocks? The unit uses an MT-4 taper mounting, compatible with standard MT-4 fittings for straightforward attachment in the workshop. Can the table be used for both horizontal and vertical machining? Yes, the device is designed for horizontal and vertical orientations, allowing versatile operations such as angled milling, cross-drilling and indexing without re-fixturing. What clamping options are available on the table surface? The top plate is fitted with a T-slot 16 mm, permitting secure clamping of vices, fixtures and bespoke workholding solutions. Is the VUT-12 suitable for small toolroom and production environments? With a 300 mm diameter and compact dimensions, the VUT-12 is suited to both toolrooms and production cells where precise angular positioning and reliable workholding are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x180x2mm Eye Protection Shield Splash Resistant - Vertex
Take advantage of a compact, robust protective solution that combines practical dimensions and low weight for efficient workshop use; the 2 mm shield thickness and rapid dispatch ensure minimal downtime—order directly via Metav Werkzeuge or consult the team for further technical clarification. VH-56 Eye Protection Shield — compact 300 x 180 x 2 mm protective panel by Vertex VH-56 is a compact eye protection shield designed for clear, reliable coverage in workshop and laboratory settings; its size and construction prioritise space-saving protection where visibility and manoeuvrability matter Compact 300 x 180 mm form factor 2 mm thickness for reliable barrier function Lightweight at 1 kg for easy handling Reliable protection with measurable dimensions The VH-56 presents a straightforward, measurable solution for localised eye protection: the 300 x 180 x 2 mm format provides defined coverage while keeping the unit lightweight for handheld or mounted applications. The specified 2 mm thickness gives a balance between rigidity and manageable bulk; in practice this means a durable barrier that does not overly restrict movement. Emphasis on exact dimensions supports planning for integration into workstations or personal protective equipment layouts. Practical benefits for daily workshop use Compact dimensions and modest mass translate into practical advantages in production and maintenance contexts. The shield’s format reduces storage footprint and simplifies handling during multiple shifts, supporting faster changeovers and reduced handling time. The visible, standardised sizing aids inventory management and ordering processes, while the lightweight construction facilitates temporary repositioning or stowage without special tools. These attributes deliver tangible efficiency gains in routine operations. Ease of specification and logistics From a procurement standpoint, clear identifiers such as the GTIN and SKU simplify stock management and traceability. The item’s compact footprint and predictable weight assist transport planning and on-site allocation. Rapid dispatch noted in the product listing reduces lead times, helping to avoid production delays. This practical logistics profile, combined with standardised data, supports cost-effective purchasing decisions and dependable workshop supply chains. For ready procurement or tailored advice on integrating this Vertex eye protection shield into existing PPE arrangements, contact Metav Werkzeuge for expert guidance and fast dispatch from Emmerich. Technical data Article number: VH-56 GTIN: 4061905083419 EClass: 40011590 Title: Vertex Augenschutzschild einfach sofort beziehen Facts Dimensions: 300 x 180 x 2 mm Weight: 1 kg Special features Brand: Vertex SKU: VH-56 Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/bc/2f/97/63/63972fbcc806fb82109e35de/VH-56-main.png FAQ What are the exact dimensions and weight of the shield? The shield measures 300 x 180 x 2 mm and has a weight of 1 kg, providing a compact, lightweight protective panel suitable for close-range tasks. Is the VH-56 suitable for use in tight workspaces? Yes, the compact format of the VH-56 eye protection shield is intended for situations where a reduced footprint and easy manoeuvrability are required. What information is available for procurement and stock management? The product is listed with GTIN 4061905083419 and article number VH-56 to support straightforward ordering and inventory control. Is the base material specified for this protection shield? Material details are not provided in the available data; consult the product datasheet or Metav Werkzeuge for material specifications and compatibility information. How does the shield help reduce operational downtime? The standardised size and lightweight construction enable quick handling and replacement, while rapid dispatch from stock reduces lead time for replenishment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x180x2mm Transparent Face Shield Magnetic Base 80Kg 60x50x55mm - Vertex
Take advantage of a transparent protective panel with a magnetic 80 kg base and compact dimensions to maintain clear sightlines at inspection stations while keeping adjustments quick and secure. Order the VH-57 directly via Metav Werkzeuge or consult our specialists for application advice. VH-57 Eye Protection Shield — transparent panel with 80 kg magnetic base by Vertex The VH-57 eye protection shield is a compact, magnetic-mounted safety barrier designed for machine guards and inspection workstations in industrial workshops. Transparent 300 x 180 x 2 mm panel Magnetic base, 80 kg holding force Compact 60 x 50 x 55 mm footprint Robust 1.6 kg overall weight Clear visibility for continuous inspection and safe handling The transparent panel delivers unobstructed visual access to processes, enabling uninterrupted monitoring at inspection benches and machine frontages. With dimensions of 300 x 180 x 2 mm, the screen preserves sightlines while acting as a physical barrier; this supports faster quality checks and reduces downtime associated with temporary shielding. The relatively lightweight 1.6 kg construction allows easy repositioning without sacrificing stability, so supervision and measurement tasks remain efficient and ergonomic. Fast, secure attachment with a high-hold magnetic base A magnetic base rated at 80 kg provides secure fixation to ferrous surfaces, enabling rapid mounting and removal where temporary or mobile protection is required. The base's compact footprint of 60 x 50 x 55 mm minimises obstruction at the workstation and is designed for stable contact on flat metal surfaces. This mounting method removes the need for permanent fixtures, supporting flexible workstation layouts and quick adaptation to changing production steps. Versatile use across inspection, assembly and machine guarding The compact shield is suited to a range of workshop tasks, from visual inspection and bench testing to acting as a localized safety barrier in assembly zones. The clear panel supports compliant inspection routines by keeping the operator able to visually assess components while maintaining a protective separation. Its compact dimensions and portable weight make the unit a practical option for toolrooms, quality-control stations and small-batch production environments that require frequent rearrangement of protective equipment. Contact Metav Werkzeuge for tailored advice on integrating the VH-57 magnetic eye protection shield into your workflow; supply and consultation are handled directly from Emmerich for reliable delivery and expert support Technical Data SKU: VH-57 GTIN: 4061905089763 Manufacturer: Vertex Core specifications Dimensions: 300 x 180 x 2 mm Weight: 1.6 kg Magnetic holding force: 80 kg Special features and materials Transparent panel Magnetic base 60 x 50 x 55 mm Suitable for machine guarding and inspection stations FAQ How is the VH-57 mounted and removed? The VH-57 uses a magnetic base with an 80 kg holding force for rapid attachment to ferrous surfaces and straightforward removal when relocation is required. Can the transparent panel be used on inspection benches and machine fronts? Yes, the transparent panel is designed for inspection stations and machine guarding where visual access to processes must be preserved while providing a physical barrier. What are the exact dimensions and weight of the protective shield? The protective screen measures 300 x 180 x 2 mm and has an overall weight of 1.6 kg, making it compact and portable for workshop use. Is the magnetic base suitable for uneven surfaces? The magnetic base is optimised for flat ferrous contact surfaces; secure holding is achieved on appropriately prepared metal surfaces with full base contact. Who manufactures the VH-57 and where is it produced? The VH-57 is produced by Vertex and supplied through Metav Werkzeuge; full manufacturer details are provided below. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com