Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
300x202x228mm Precision Clamping Angle, High-Strength Cast Steel, 0.01mm Accuracy - Vertex
Benefit from robust right-angle fixturing with high-strength cast steel and 0.01 mm repeatability for consistent production results. Order the VR-12 angle plate directly via Metav Werkzeuge or ask our consultants if needed. VR-12 angle plate by Vertex — high-strength cast steel, 0.01 mm accuracy A VR-12 angle plate engineered for secure right-angle workpiece clamping and repeatable fixturing in machining and inspection environments Heavy-duty cast steel construction Precision alignment to 0.01 mm Compact footprint 300 x 202 x 228 mm Solid 23.7 kg mass for vibration damping Stable fixturing for improved surface quality Made from high-strength cast steel, this workholding plate combines mass and rigidity to reduce micro-movements during machining. The substantial 23.7 kg body increases vibration damping, which in turn helps maintain cutting-edge engagement and leads to fewer surface imperfections and longer tool life. With the compact footprint of 300 x 202 x 228 mm, the unit integrates on machining and measuring tables while preserving access to the workpiece. The result is a tangible increase in process reliability and a more consistent production flow. Repeatable alignment that supports serial production The defined 0.01 mm accuracy rating ensures repeatable right-angle alignment when setting up fixtures or inspection jigs. In practice, this level of precision translates into predictable tolerances across batches, reducing the need for time-consuming rework and enabling tighter process control. The stated accuracy reflects the measured behaviour of the component under standard workshop conditions; for customers less familiar with metrology terms, this means the plate holds positional references very precisely, allowing downstream operations to run with higher predictability and lower scrap rates. Practical integration into workshop workflows Designed as a stable reference for clamping, the angle plate is suitable for a wide range of fixturing tasks where a reliable 90° datum is needed. The combination of robust material and weight provides a steady base for measurement or machining set-ups, simplifying alignment procedures and reducing downtime for adjustments. For operations requiring additional technical data or specific mounting advice, Metav Werkzeuge can supply application-oriented guidance to ensure the plate meets the intended process requirements while fitting established workshop routines. Contact Metav Werkzeuge in Emmerich for specification advice or to arrange procurement of the VR-12 angle plate Technical data Article number: VR-12 GTIN: 4061905092008 Manufacturer: Vertex Facts Dimensions: 300 x 202 x 228 mm Accuracy: 0.01 mm Weight: 23.7 kg eClass: 21020601 Materials & suitability Material: high-strength cast steel Function: angle plate for right-angle workpiece fixturing and measurement FAQ What level of precision can be expected from this angle plate? The VR-12 angle plate from Vertex offers a declared accuracy of 0.01 mm, providing a reliable datum for machining and inspection tasks where tight repeatability is required. Is the VR-12 suitable for heavy-duty machining setups? Yes, the VR-12’s high-strength cast steel construction and 23.7 kg mass support stable clamping and contribute to vibration damping in demanding workshop environments. What are the physical dimensions and how do they affect use? The unit measures 300 x 202 x 228 mm, a compact footprint that balances a stable reference surface with manageable handling and integration on machine or inspection tables. Who manufactures the angle plate and where is it produced? The angle plate is manufactured by Vertex; the VR-12 is part of Vertex’s range of workholding solutions designed for precision in industrial applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x220mm 90° Clamping Angle With T-Slots M16, 300x300mm Table, 59.2kg - Vertex
Take advantage of a precise 90° alignment, generous mounting surface and robust 59.2 kg construction for stable fixturing and consistent machining results. Order the clamping angle directly via Metav Werkzeuge or ask our consultants if needed. BP22-830 Clamping Angle — 90° with M16 T-slots by Vertex BP22-830 is a 90° clamping angle designed for rigid positioning and flexible fixturing in metalworking and inspection set-ups 90° alignment with integrated M16 T-slots Stable 59.2 kg construction for vibration damping 300 x 300 mm work table for flexible fixturing 300 x 220 mm base for secure machine mounting Accurate 90° positioning that improves process reliability The 90° configuration with M16 T-slots provides a clear technical basis for repeatable set-ups. T-slots are standardised channels that accept T-bolts and clamping elements; this allows secure attachment of clamps and fixtures without bespoke adapters. For shops where consistent squareness matters, the design reduces set-up variation and supports traceable fixturing steps, contributing to predictable machining and inspection outcomes. A substantial footprint that reduces vibration and movement A larger base and top surface enhance stability during cutting or measuring operations. With a 300 x 220 mm base and a 300 x 300 mm worktable combined with a 59.2 kg mass, the assembly reliably dampens vibrations that would otherwise affect surface finish and measurement repeatability. The increased inertial mass is especially beneficial when using heavier clamps or when performing medium-duty milling passes; the result is fewer reworks and tighter tolerances. Flexible integration for common workshop workflows The top table layout supports commonly used clamping patterns and standard components, enabling fast integration into existing fixturing plans. Compatibility with standard M16 clamping hardware means off-the-shelf bolts and clamps can be used without modification, saving setup time. The robust footprint and slot spacing allow the unit to serve as a permanent mounting solution on inspection benches or as a repeatable fixture on machining centres. Practical handling and application notes for everyday use The unit is designed for workshop use where durability and ease of use are priorities. The substantial weight improves stability but requires appropriate handling equipment during installation; once positioned, the clamping angle offers long-term positional stability. Regular inspection of clamping hardware and cleaning of T-slots will help maintain the original alignment characteristics and prolong service life. Discuss integration and availability with Metav Werkzeuge — our consultants will advise on mounting options and supply logistics for the Vertex clamping angle from Emmerich to your workshop Technical data SKU: BP22-830 GTIN: 4061905086403 Manufacturer: Vertex Dimensions & weight Base (foot): 300 x 220 mm Work table: 300 x 300 mm Weight: 59.2 kg T-slot size: M16 Features & suitability 90° configuration with T-slots eClass: 21020601 Category: Vertex FAQ What does the M16 T-slot specification mean for fixture choice? The M16 T-slots on the BP22-830 clamping angle accept standard M16 T-bolts and clamping elements, allowing direct use of common fixture hardware without special adapters. Is the BP22-830 suitable for use on both inspection and machining tables? Yes, the Vertex BP22-830 clamping angle is designed as a rigid fixturing component suitable for inspection benches and machining set-ups due to its 300 x 300 mm work table and robust mass. How should the clamping angle be handled during installation? Given the BP22-830’s weight of 59.2 kg, mechanical handling or team lifting is recommended for safe installation; once secured, the unit provides a stable platform for fixturing. Can standard clamps and bolts be used directly with this unit? Standard M16 clamps and T-bolts are compatible with the integrated T-slots, enabling direct use of off-the-shelf clamping hardware with the Vertex clamping angle. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x220mm Clamping Angle 90° With T-Slots, 62.5 kg - Vertex
Take advantage of the combination of robust stability, standard M12 T-slots and a compact working surface to streamline set-up and improve machining repeatability; order the Vertex BP22-30 angle plate directly via Metav Werkzeuge or ask our consultants if needed. BP22-30 Vertex 90° Angle Plate with M12 T-slots The BP22-30 is a 90° angle plate designed for secure workholding on milling machines, inspection tables and general fixture use. Heavy 62.5 kg solid construction 300 x 300 mm working table M12 T-slots for standard fixtures Precision 90° clamping angle Stable foundation that improves machining results A heavy, rigid workholding base reduces vibration and increases process stability; the 62.5 kg mass of this angle plate provides a damped platform that helps maintain cutting consistency and surface quality. By fixing the workpiece to a stable reference, the risk of chatter and micro-movement is reduced, which in turn decreases rework and scrap rates. The solid construction translates directly into higher first-pass yields and more predictable machining cycles, supporting efficient throughput in small to medium workshops. Quick integration with standard clamping systems The angle plate features M12 T-slots across a 300 x 300 mm working table to accept commonly used clamps, studs and fixtures. This standardised interface simplifies fixture planning and reduces the need for bespoke adapters; off-the-shelf components can be used to secure parts rapidly. The clear alignment of slots enables modular set-ups and repeatable positioning; installers and shopfloor planners will appreciate how straightforward component interchange becomes when the clamping interface follows established norms. Accurate right-angle set-ups that save time Engineered as a 90° right-angle reference, the plate aids fast alignment of parts for milling, drilling and measurement operations. A true right-angle datum shortens set-up time because edges and faces can be registered directly, avoiding complex jigs. The result is consistent part geometry from batch to batch and improved repeatability, which matters most where positional accuracy is paramount. Faster set-ups also free machining capacity for additional jobs, improving overall workshop productivity. Confidence through trusted supply and practical support Sourcing from a reliable partner streamlines procurement and reduces operational risk. Metav combines wide product availability with a pragmatic approach to order fulfilment from Emmerich, offering a concentrated selection of precision tools alongside practical expertise. That established supply chain and the concept of a European quality filter support continuity of supply and dependable delivery. For workshops seeking dependable workholding, this angle plate is backed by a supplier network that emphasises long-term reliability and pragmatic service. Discuss specification needs with Metav Werkzeuge and confirm whether the BP22-30 angle plate fits the intended fixture concept; contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical advice from the Metav team Technical data Article number: BP22-30 GTIN: 4061905083075 EClass: 21020601 Numbers Working table: 300 x 300 mm Base footprint: 300 x 220 mm Weight: 62.5 kg T-slot size: M12 Special features Designation: 90° with T-slots Product type: Angle plate Category: Vertex FAQ What are the tabletop dimensions? The BP22-30 angle plate provides a 300 x 300 mm working table suitable for compact fixtures and medium-sized components. Which T-slot size is fitted to the plate? This angle plate uses M12 T-slots, allowing connection of standard clamps and modular fixturing systems in common use. Is the plate fixed at a true right angle? The product is designed as a 90° reference plate for right-angle clamping and alignment operations on machine and inspection equipment. How heavy is the unit and what are the handling considerations? The Vertex BP22-30 weighs 62.5 kg; handling and installation should be planned using appropriate lifting equipment or team lifting to ensure safe mounting. Can the plate accept standard milling vises and clamps? Yes, the combination of M12 T-slots and the standard working surface enables the use of common milling vises, clamp sets and threaded studs with the BP22-30 angle plate. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x300mm Precision Indexing Table 15° Rotation Bidirectional, 14mm T‑Slot - Vertex
Compact and reliable: the combination of a 300 x 300 mm table and 15° indexing provides precise, repeatable angular positioning for machining and assembly tasks. Order the precision indexing table directly via Metav Werkzeuge or ask the consultants for tailored advice. VIT-300-15 Precision Indexing Table — 300 x 300 mm tabletop, 15° indexing — Vertex A VIT-300-15 is a precision indexing table designed for repeatable angular positioning in workshop and production environments. 300 x 300 mm rigid table surface 15° indexing for quick repositioning Rotates clockwise and counter-clockwise 14 mm T-slots for secure clamping Precision that keeps production on schedule The unit delivers consistent angular steps thanks to its 15° indexing, enabling fast, repeatable set-ups that reduce non-productive time. With an emphasis on measurable accuracy (listed as accuracy class 3), the rotary solution supports processes where positional certainty is essential. The generous 300 x 300 mm working surface simplifies fixture placement and, when combined with the indexing mechanism, decreases cycle variability—resulting in improved throughput and predictable component quality. Robust workholding for reliable processes Built for stability, the table’s substantial mass (94 kg) and integrated 14 mm T-slots provide a secure platform for clamping standard tooling and workpieces. The design allows rotation clockwise and counter-clockwise, which supports flexible machining sequences and eases toolpath planning in both manual and automated workflows. These mechanical properties translate into fewer re-clamps, reduced vibration during operation and a lower risk of setup-related rejects, so production runs remain consistent. Integration and set-up made straightforward The indexing table is engineered for straightforward integration into existing benches and machines, providing repeatable angular positioning without complex adjustments. Explanation: indexing means the table stops at defined angular increments (here 15°), so cuts, drilling or measuring steps can be executed with minimal alignment effort. The compact footprint and standard clamping interfaces support quick installation and compatibility with common workshop fixtures, helping to maintain a steady production flow with minimal training required. Contact Metav Werkzeuge for tailored technical advice and order handling; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: VIT-300-15 GTIN: 4061905084492 Eclass: 36600310 Manufacturer: Vertex Facts Table dimensions: 300 x 300 mm Height: 160 mm Indexing step: 15° T-slot width: 14 mm Weight: 94 kg Accuracy class: 3 Special features Rotates clockwise and counter-clockwise Precision indexing for repeatable angular positioning Rigid table surface for stable clamping Suitable for workshop and production environments FAQ What indexing increment does the table provide? The VIT-300-15 provides a 15° indexing increment for defined angular steps, suitable for rapid repositioning during machining and assembly. Can the table rotate in both directions? Yes, the Vertex precision indexing table rotates clockwise and counter-clockwise, enabling flexible operation sequences and easier alignment. What are the tabletop dimensions and clamping options? The tabletop measures 300 x 300 mm and includes 14 mm T-slots for secure attachment of fixtures and standard clamps. How heavy is the unit and what stability does that give? At 94 kg, the device offers a stable base that reduces vibration and improves repeatability, supporting reliable machining cycles. Is the table suitable for both manual and CNC-assisted setups? The precision index table from Vertex is designed for workshop and production use, integrating easily with manual benches and automated systems where repeatable angular positioning is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x300x150mm Precision Right Angle Clamping Block, Alloy Steel, Accuracy 0.005mm - Vertex
Combine 0.005 mm accuracy with a robust alloy steel construction to ensure stable, repeatable set-ups and reduced rework on demanding machining tasks. Order the VRS-1206 directly via Metav Werkzeuge or ask our consultants for application advice. VRS-1206 Precision Clamping Angle by Vertex — 0.005 mm accuracy, alloy steel The VRS-1206 Precision Clamping Angle is a rigid workholding component designed for exact angular set-ups and machine-shop fixturing, suitable for precision grinding, inspection and milling applications. High accuracy 0.005 mm Robust alloy steel construction Dimensions 300 x 300 x 150 mm Solid 32.3 kg for stable set-up Reliable accuracy that reduces rework and inspection time The device delivers a declared accuracy of 0.005 mm, providing a dependable reference for squaring and angular set-ups. Such a level of precision minimises iterative adjustments during machining and inspection, which in turn reduces scrap rates and secondary operations. In practical terms, this degree of tolerance supports high-precision tasks where consistent repeatability is essential; the specification is meaningful for calibration, gauging and production runs that demand tight alignment. Mass and dimensions for vibration damping and stable clamping With a substantial mass of 32.3 kg and external dimensions of 300 x 300 x 150 mm, the unit acts as a stable platform that resists chatter and movement during clamping or machining. The inherent mass improves damping characteristics compared with lighter fixtures, leading to better surface finishes and reduced tool wear in many applications. For process planners, the compact footprint allows installation on machine tables and inspection benches without extensive reorganisation of existing set-ups. Durable alloy steel construction for long service life Manufactured from alloy steel, the component offers mechanical robustness and sustained dimensional stability under routine shop-floor conditions. Alloy steel provides a balance between hardness and toughness, making the component resilient to handling and repeated fixturing cycles. When incorporated into a workholding strategy, this durability supports predictable performance over time and contributes to lower total cost of ownership through fewer replacements and less frequent recalibration. Practical integration into workshop workflows The design supports standard workholding practices and complements common fixturing accessories used in machining and inspection environments. As a precision reference, it can be combined with clamps, parallels and magnetic fixtures to create versatile set-ups for batch processing or one-off prototypes. Documentation of the nominal values and the known accuracy enables quality assurance teams to include the component in inspection plans and process audits, ensuring traceable, verifiable set-ups. Contact Metav Werkzeuge for tailored procurement and application guidance on the Vertex VRS-1206; our consultants can advise on integration into existing workflows and supply logistics from Emmerich. Technical Data SKU: VRS-1206 GTIN: 4061905096181 Manufacturer: Vertex Facts Dimensions: 300 x 300 x 150 mm Accuracy: 0.005 mm Weight: 32.3 kg Special features Material: alloy steel ECLASS: 21020601 FAQ What level of precision can be expected from this clamping angle? The VRS-1206 from Vertex is specified with an accuracy of 0.005 mm, making it suitable as a precision reference for alignment and inspection tasks. Is the VRS-1206 suitable for heavy-duty machining environments? Yes, the alloy steel construction and a mass of 32.3 kg provide stability and damping that are advantageous in many machining contexts. Can this component be used on standard machine tables and inspection benches? The dimensional envelope of 300 x 300 x 150 mm means the unit fits typical machine and bench layouts and integrates with common fixturing accessories. How does the material choice affect longevity and maintenance? Made from alloy steel, the Vertex unit balances hardness and toughness for long service life; routine cleaning and corrosion protection are advised to maintain reference surfaces. Is the VRS-1206 traceable for quality documentation? Yes, the product is supplied with identifying data (SKU VRS-1206 and GTIN 4061905096181) that can be recorded in inspection plans and process documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x450x177mm Small Parts Storage Box Set, 8 Compartments Per Set - Vertex
Take advantage of a space-saving, stackable design and the clearly defined 300×450×177 mm footprint to streamline parts handling; the set of 8 organisers reduces search times and simplifies inventory. Order the storage boxes directly via Metav Werkzeuge or ask the consultants if specification advice is needed. Storage boxes for small parts VHB-3045 — Set of 8, 300×450×177 mm (Vertex) The Storage boxes for small parts are a compact set designed for organised storage and clear identification of fasteners and small components in workshops and parts stores. Set of 8 stackable storage boxes Space-saving 300×450×177 mm format Lightweight total weight 1.88 kg Easy inventory with GTIN 4061905089886 Faster picking and tidier workspaces with a compact footprint The stackable organiser set provides a consistent, measurable footprint that optimises bench and shelf usage. With the 300×450×177 mm format, racking and workbench layouts can be planned precisely, reducing wasted space and enabling faster picking cycles. The uniform size supports systematic row-and-column storage, which contributes to shorter retrieval times and fewer misplaced items. A set format tuned to small-part logistics and traceability Delivered as a set of 8, the organisers simplify batch handling and replenishment: sets can be allocated per job, per machine or per shelf location to speed up resupply. The presence of a clear GTIN allows seamless integration into barcode-based inventory systems and supports consistent stock control, aiding purchasing and reducing downtime caused by missing parts. Practical benefits for workshop routines and maintenance tasks The modular design supports stacked storage and straightforward access during assembly or maintenance work, helping to reduce handling steps and task interruptions. Clear grouping of fasteners and small items lowers the risk of cross-contamination between batches and improves process reliability, which is particularly valuable in scheduled maintenance or high-mix production environments. Simple specification and integration into existing systems Specification is straightforward thanks to the fixed dimensions and set composition, enabling planners to calculate storage density and shelf allocation without guesswork. The compact, standardised format makes the organisers compatible with common storage systems and allows easy labelling and documentation within existing material management practices. Contact Metav Werkzeuge in Emmerich for order placement or technical advice — email info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271 Technical Data Article number: VHB-3045 GTIN: 4061905089886 Manufacturer: Vertex Measurements Dimensions: 300×450×177 mm Weight: 1.8825 kg Pieces per set: 8 Features Stackable design Set format ECLASS: 21100422 FAQ What materials are the storage boxes made from? The answer is not specified in the provided data for the Storage boxes for small parts VHB-3045 (Vertex); material information is not available. Can the organisers be stacked on standard shelves? Yes. The set of 8 units and the standardised dimensions of the Storage boxes for small parts VHB-3045 permit stable stacking and planned shelf allocation. How does the GTIN help with inventory control? The GTIN 4061905089886 enables barcode scanning and automated entry of the VHB-3045 SKU into inventory systems for faster stock checks and ordering. Is the set suitable for workshop and on-machine storage? The compact footprint and stackable format make these organisers suitable for workshop benches and localised on-machine parts storage for small components. How many boxes are included in one delivery unit? One delivery unit comprises a set of 8 boxes as indicated for the VHB-3045 organiser set. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x600mm Magnetic Chuck 26N/cm² Holding Force, 48mm Height - Vertex
Take advantage of the combination of a compact 300 x 600 mm footprint, a low 48 mm profile and a substantial mass of 73.5 kg for stable, repeatable workholding; order the VG-1224 magnetic clamping plate directly via Metav Werkzeuge or consult the sales engineers for tailored advice. VG-1224 Magnetic Clamping Plate – 300 x 600 mm, 48 mm profile | Vertex A VG-1224 magnetic clamping plate designed for secure, repeatable workholding of flat ferrous components in machine-shop environments. *Compact 300 x 600 mm footprint *Notable holding value 26 *Low 48 mm profile for tight setups Consistent magnetic holding for precise machining The VG-1224 delivers reliable magnetic holding characterised by a defined holding value of 26, which translates into consistent clamping force across the plate surface. This steadiness reduces workpiece movement under cutting loads and supports dimensional accuracy during milling and grinding. The magnetic action secures ferrous parts without mechanical clamps, simplifying set-up sequences and reducing obstruction in the machining envelope. The result is improved cycle stability and fewer reworks for precision-dependent operations. Space-efficient design that improves accessibility With a 300 x 600 mm working area and a slim 48 mm profile, the clamping plate is suitable where machine table clearance is limited. The low profile helps maintain minimal tool-to-workpiece distance and supports fixtures that require tight vertical tolerances. Smaller footprint equipment benefits from the plate’s compactness while still offering an ample magnetic surface for medium-sized components. This layout supports quicker access and easier toolpaths, promoting throughput in busy workshops. Mass and stability for vibration damping At 73.5 kg, the assembly provides intrinsic stability that assists in damping vibrations during cutting. The mass works in favour of improved surface finish and reduced chatter when paired with appropriate machining parameters. Handling and mounting should be planned in accordance with the plate’s weight; when installed on a machine table, the mass contributes to a solid foundation for repeatable operations, enhancing overall process reliability in series or batch production. Practical integration and straightforward maintenance The magnetic clamping principle means setup is often quicker than with mechanical clamps, reducing non-productive time between operations. The plate is compatible with standard machine tables and can be incorporated into existing workholding strategies. Routine maintenance focuses on keeping the contact surface clean and free of swarf or coolant residues to preserve magnetic holding performance and protect the plate geometry. The straightforward design supports long service life when standard workshop care procedures are observed. Contact Metav Werkzeuge to discuss how the Vertex VG-1224 magnetic clamping plate fits specific workholding needs; technical staff are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: VG-1224 GTIN: 4061905095436 Manufacturer: Vertex Data Dimensions: 300x600 mm Height: 48 mm Weight: 73.5 kg Magnetic force: 26 Special features ECLASS: 21020809 Image file: vg-407-main.jpg Product type: magnetic clamping plate FAQ What types of workpieces are suited to this magnetic clamping plate? The VG-1224 magnetic clamping plate is intended for flat ferrous workpieces; the magnetic system secures steel-based components for machining and finishing tasks. How does the magnetic holding value of 26 affect machining performance? A holding value of 26 indicates consistent magnetic clamping across the surface, aiding in stability and reducing the likelihood of workpiece movement during cutting on the Vertex VG-1224. Is the plate difficult to integrate into an existing machine table? Integration is straightforward: the VG-1224 mounts on standard tables and supports typical shop routines, with the plate’s compact dimensions easing positioning and set-up. What maintenance is required to preserve holding performance? Regular cleaning of the contact surface and removal of swarf and coolant residues will maintain the magnetic holding characteristics of the VG-1224 and extend service life. Does the weight of 73.5 kg impact handling and installation? The mass of 73.5 kg contributes to stability and vibration damping; appropriate handling equipment or assistance should be used during installation to ensure safe and accurate placement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x600mm Magnetic Chuck Very Fine Pole Distribution, 30 kgf Holding Force - Vertex
Take advantage of secure workholding and a very fine pole distribution to improve repeatability and reduce rework; the combination of a 300 x 600 mm clamping surface and a magnetic force rated 30 ensures stable machining performance. Order the magnetic clamping plate directly via Metav Werkzeuge or consult the team for specification guidance. Magnetic clamping plate VRTW-1224A — 300 x 600 mm, very fine pole distribution (Vertex) The Magnetic clamping plate VRTW-1224A is a Type A, heavy-duty workholding solution designed for precision machining where fine pole spacing and consistent holding power are required. 300 x 600 mm clamping surface Very fine pole distribution 50 mm plate height for stable support Magnetic force rated 30 for secure hold Robust construction, 77 kg mass Consistent holding for precision results A finely graded pole pattern combined with a clear magnetic force rating delivers repeatable clamping for delicate and small components. The very fine pole distribution reduces the need for additional fixtures, enabling secure contact across complex workpiece geometries and minimising movement during milling or grinding. The result is improved dimensional integrity and fewer secondary operations, which supports a more predictable production flow and higher first-pass yield. Designed for workshop integration and stability With a clamping surface of 300 x 600 mm and a plate height of 50 mm, the unit offers a compact footprint that still provides a generous working area for many machining tasks. At 77 kg, the construction adds mass where it matters, increasing damping and stability on the machine table without compromising positional accuracy. These dimensions make the plate straightforward to position on standard machine beds and allow for confident, vibration-resistant workholding during interrupted cuts. Faster setup for varied part sizes The Type A design and very fine pole spacing are suited to precise positioning of small to medium components, reducing reliance on elaborate mechanical fixtures. The pole layout provides multiple clamping points close together, allowing for better distribution of holding forces and fewer adjustments between jobs. For shops aiming to shorten setup times and increase throughput, this workholding system supports quicker changeovers and more flexible part orientation while maintaining safe clamping performance. Traceability and manufacturer quality Manufactured by Vertex, the clamping plate is identified for ordering and inventory by SKU VRTW-1224A and GTIN 4061905094910, facilitating procurement and traceable asset management. The robust build quality reflects workshop-grade expectations and supports consistent service life under normal machining conditions. For operations requiring clear documentation and durable equipment, the model integrates into existing workflows while offering straightforward identification for maintenance records. Contact Metav Werkzeuge in Emmerich for a tailored specification and to secure the Vertex VRTW-1224A for precision workholding Technical data Article number: VRTW-1224A GTIN: 4061905094910 Manufacturer: Vertex ECLASS: 21020809 Facts Dimensions: 300 x 600 mm Height: 50 mm Weight: 77 kg Magnetic force: 30 Special features Very fine pole distribution Type: A SKU: VRTW-1224A FAQ How does the fine pole distribution affect clamping performance? The very fine pole distribution on the Magnetic clamping plate VRTW-1224A increases the number of contact points, improving grip on irregular or small components and reducing the need for extra fixtures. Is the plate suitable for small, delicate parts? Yes. The fine pole spacing and Type A design allow delicate components to be held securely with lower local clamping pressure while maintaining positional stability during machining. What are the key dimensions and weight for machine setup? The clamping surface measures 300 x 600 mm, the plate height is 50 mm and the unit weight is 77 kg, enabling assessment of machine table compatibility and fixturing requirements. How can the VRTW-1224A be ordered or referenced? Order and inventory tasks can use SKU VRTW-1224A and GTIN 4061905094910 for precise identification and traceability when procuring the Vertex magnetic clamping plate. Does the product come from a recognised manufacturer? Yes. The magnetic clamping plate is produced by Vertex, a manufacturer known for machine tool accessories and workholding solutions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x600mm Tilting Clamping Table 45° Swivel, 25 Kg Load Capacity - Vertex
Take advantage of a compact, swivel-capable workholding solution that combines FC25 cast iron durability with a 300×600 mm table for reliable setup and machining of small fixtures; order the VP-600 directly via Metav Werkzeuge or consult our specialists if further advice is required. VP-600 Tilting clamping table by Vertex — 300×600 mm table, 45° swivel VP-600 is a robust tilting clamping table designed for precise fixturing and angled machining tasks in small-scale production and toolrooms. Cast iron FC25 body for long-term stability Swivels 45° for angled machining Table 300×600 mm for versatile clamping Max load 25 kg, height 202 mm for compact integration Stable groundwork for repeatable setups The solid FC25 construction provides a stable base that reduces vibration during machining, ensuring repeatable results across batches. With a machine mass of 85 kg, the unit benefits from natural damping that improves surface finish and measurement consistency. The material choice combines stiffness with corrosion resistance typical for workshop castings, so fixtures remain aligned over time. This stability translates directly into lower scrap rates and fewer setup iterations for production and toolroom environments. Flexible clamping for angled and multi-face work A 45° swivel function expands the range of accessible machining angles without the need for complex re-fixturing, enabling quicker transitions between operations. The 300×600 mm work surface offers ample room for modular clamps and bespoke jigs while keeping the footprint suitable for bench or machine-table installation. The specified 25 kg maximum load indicates suitability for small to medium fixtures and components; the table geometry supports precise positioning while maintaining clearances for cutting tools and probes. Easy integration and dependable service life At a height of 202 mm, the unit integrates cleanly with standard machine tables and measuring setups, simplifying alignment and reference-height calculations. Surfaces and mounting points are dimensioned for typical clamping systems, allowing compatibility with common tooling. The durable cast-iron design minimises maintenance intervals and supports long-term workshop availability, reducing downtime and supporting continuous operation. Supplied as a compact, ready-to-mount clamping table, the solution is well suited to both retrofit and new-machine applications. Contact Metav Werkzeuge in Emmerich to specify the Vertex VP-600 tilting clamping table for workshop use or to request detailed integration advice from our consultants Technical data SKU: VP-600 GTIN: 4061905094552 Manufacturer: Vertex Facts Weight: 85 kg Max load: 25 kg Table size: 300×600 mm Height: 202 mm Special features Material: FC25 (cast iron) Swivel range: 45° Product type: Tilting clamping table (workholding) FAQ What is the maximum load capacity of the VP-600? The VP-600 has a rated maximum load capacity of 25 kg, suitable for small fixtures and components typically used in toolrooms and small-batch production. Which material is the clamping table made from and why does it matter? The table is manufactured from FC25 cast iron, chosen for its rigidity and vibration-damping properties, which support repeatable machining and improved surface finishes. Can the VP-600 be used for angled machining operations? Yes, the integrated 45° swivel enables angled setups without complex re-fixturing, allowing faster changeovers and greater flexibility for multi-face work. What are the table dimensions and how do they affect fixture choice? The working surface measures 300×600 mm, providing space for modular clamps and bespoke jigs while remaining compact enough for bench or machine-table installation. Who manufactures the VP-600 and where can more information be obtained? The VP-600 is produced by Vertex; further technical details and ordering assistance are available via Metav Werkzeuge. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
305mm Milling Vise Extra Wide Opening 1500 kgf Clamp Force 0.02mm Accuracy - Vertex
Benefit from a secure combination of 0–305 mm opening and 1,500 kgf clamping force for stable, efficient milling. The large opening reduces repositioning, while the precise 0.02 mm repeatability supports consistent finishing. Order the VJ-600 directly via Metav Werkzeuge or ask our consultants if needed. VJ-600 Milling Vice by Vertex — extra‑large 0–305 mm opening, 1,500 kgf clamping force A VJ-600 milling vice engineered for heavy-duty workholding, offering wide-piece capacity and reliable mechanical clamping for workshop and machining-centre use. Extra-large 0–305 mm opening 1,500 kgf clamping force 0.02 mm positioning accuracy Robust 46 kg mechanical design Hold larger components with fewer setups for higher throughput The wide 0–305 mm opening allows secure clamping of larger or irregular workpieces, reducing the need for frequent re‑clamping and saving set‑up time. With a rated 1,500 kgf clamping force, the vice provides a high holding capacity that minimises vibration and workpiece movement during heavy cuts. The combination of width and force therefore translates directly into improved machining stability and fewer interruptions in production. Achieve reproducible results with fine positioning control A stated 0.02 mm accuracy denotes the vice’s capability for precise jaw positioning and repeatability. In practical terms, this level of precision helps to reduce finishing passes and rework by keeping the part datum consistent across multiple clamping operations. For users less familiar with technical tolerances: repeatability indicates how closely the vice returns to the same position after opening and reclamping, which is crucial for batch machining and toolpath reliability. Durable mechanical design for reliable daily use Constructed as a mechanical vice and weighing 46 kg, the unit combines mass and rigid construction to absorb cutting forces and deliver long service life without complex maintenance procedures. The heavy‑duty build supports workshop workflows where robustness is paramount, while the simple mechanical operation ensures predictable behaviour across shifts. Fewer moving parts mean easier inspection and lower likelihood of unexpected downtime. Integration and practical advantages on the shop floor The VJ-600 is engineered for straightforward mounting and operation in typical milling setups; its dimensions (546×290×175 mm) make the vice compact enough for many machine tables while still offering a substantial opening range. The vice’s precision characteristics help shorten quality-control loops, allowing operators to achieve target tolerances more quickly. Clear technical data such as SKU and GTIN support traceability in purchasing and inventory systems. Contact Metav Werkzeuge in Emmerich for tailored advice and to arrange supply of the VJ-600 milling vice with its wide opening and high clamping force. Technical data Article number: VJ-600 GTIN: 4061905086991 ECLASS: 21020601 ETIM: EC002173 Type: Mechanical Facts Dimensions: 546×290×175 mm Opening range: 0–305 mm Clamping force: 1,500 kgf Accuracy (repeatability): 0.02 mm Weight: 46 kg Special features Extra-large opening for big workpieces High clamping force for heavy cutting Robust mechanical construction Suitable for workshop and machining-centre use FAQ What is the maximum opening of the vice? The vice offers an opening range of 0–305 mm, allowing clamping of larger components without special fixtures. How strong is the clamping force? The VJ-600 provides a clamping force of 1,500 kgf, giving stable holding for demanding milling operations. What level of repeatability can be expected? Repeatability is specified at 0.02 mm, which supports consistent repositioning and reduces the need for corrective finishing. Is the vice suitable for heavy cutting? Yes. The combination of 1,500 kgf clamping force and a 46 kg robust construction makes the vice appropriate for substantial cutting forces. Which machine environments suit this vice? The vice is designed for standard milling and machining‑centre setups where a wide opening and strong, repeatable clamping are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
305mm Rotary Index Table Horizontal/Vertical, MT-4 Mounting, 4° Per Spindle Turn, 10" Graduations, 120 Kg Horizontal/60 Kg Vertical Capacity - Vertex
Take advantage of precise indexing, a compact 305 mm work surface and robust load ratings for reliable multi‑axis machining. Order the Vertex rotary table directly via Metav Werkzeuge or consult our specialists for compatibility advice. Rundteiltisch HV-12 — Rotary table for horizontal and vertical machining, 305 mm The Rundteiltisch is a compact rotary table designed for precision horizontal and vertical setups on milling machines and machining centres, combining a moderate footprint with high repeatability for toolpaths and indexing operations. 305 mm table diameter MT-4 spindle taper Load 120 kg horizontal / 60 kg vertical T-slots 6 × 16 mm 4° per spindle revolution, 10 arcsec readout High‑precision indexing for tighter tolerances The HV-12 delivers controlled angular positioning through a fine 4° per spindle revolution and a reading resolution of 10 arcseconds, which together reduce cumulative positioning error during repetitive operations. Such mechanical indexing accuracy benefits applications where consistent hole patterns, gear cutting preparations or multi‑facet machining are required. The MT-4 spindle taper offers a standard interface for drive and locking systems, ensuring robust torque transmission and predictable repeatability without additional adapters. Versatile orientation and stable load capacity A dual‑orientation design allows the table to be mounted for both horizontal and vertical machining, broadening its use across setup types while saving fixture changes. The rated capacity of 120 kg horizontally and 60 kg vertically supports medium‑sized workpieces and fixtures, allowing secure clamping for milling, drilling and light rotary operations. The 305 mm work surface provides a practical balance between usable area and machine table clearance, enabling integration on common vertical and horizontal mills without excessive overhang. Secure fixturing and compact integration Built with T-slots (6 × 16 mm) across the face, the table simplifies fixturing: standard clamps and cross‑slots can be used to locate vises, angle plates or bespoke fixtures quickly. The compact overall dimensions (388 × 330 × 123 mm) and a height of 125 mm make the unit straightforward to position on a machining table, while the 58.7 kg mass contributes to vibration damping in normal cutting conditions. Together, these attributes reduce setup time and increase process stability, which supports more consistent cycle times and part quality on the shop floor. Discuss Vertex HV-12 specifications with Metav Werkzeuge in Emmerich for tailored mounting advice and prompt delivery from our European warehouse Technical data SKU: HV-12 GTIN: 4061905089183 ECLASS: 36600610 Manufacturer: Vertex Core specifications Table diameter: 305 mm Dimensions (L×W×H): 388 × 330 × 123 mm Height: 125 mm Weight: 58.7 kg Max load horizontal: 120 kg Max load vertical: 60 kg Rotation per spindle turn: 4° Reading resolution: 10 arcseconds Special features Spindle taper: MT-4 Configuration: Horizontal / Vertical T-slots: 6 × 16 mm Brand: Vertex FAQ What degree of indexing precision can be expected from this rotary table? The Vertex HV-12 rotary table provides indexing with a 4° advance per spindle revolution and a readout resolution of 10 arcseconds, delivering the fine angular control required for precise patterning and multi‑axis setups. Is the table suitable for vertical mounting on a milling machine? Yes, the HV-12 is designed for horizontal and vertical use; the specification lists a maximum vertical load of 60 kg, so ensure the workpiece and fixturing remain within that limit. Which spindle interface is used to drive the table? Driving and locking are via an MT-4 spindle taper, a common standard that allows secure coupling to a variety of drive arrangements and ensures stable torque transmission. How does the table face support common fixtures and vises? The face includes T-slots (6 × 16 mm) for conventional clamping hardware; this enables fast mounting of vises, plates and custom fixtures without special adapters. What are the physical dimensions and weight for machine compatibility checks? The unit measures 388 × 330 × 123 mm with a height of 125 mm and weighs 58.7 kg, values that assist in verifying clearance and load capacity on the host machine. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
30mm Closure Plug Z2 DIN 69880 VDI30 Form Z2, 20mm A / 68mm D - TECWERK
Take advantage of a standardised interface and precise dimensional control to ensure consistent toolholder sealing in production. The combination of Form Z2 compatibility and clearly specified seat dimensions supports dependable installation and process repeatability; order directly via Metav Werkzeuge or consult the technical team for specification advice. TECWERK closure plug Z2 for DIN 69880 / VDI30 — compact sealing for VDI30 toolholders TECWERK closure plug Z2 for DIN 69880 / VDI30 is a purpose-made blanking device designed for the VDI30 interface and intended to give a precise mechanical fit in standardised toolholders. Form Z2 for VDI30 toolholders d1 30 mm for precise seat A 20 mm insertion depth D 68 mm overall diameter Precise interface compatibility reduces set-up uncertainty The closure component is engineered to meet the geometric demands of the VDI30 interface as referenced in DIN 69880, which ensures repeatable seating across compatible toolholders. With a nominal d1 30 mm seat and an A 20 mm insertion depth, the part provides a defined engagement that minimises radial play and positional variance. This dimensional transparency supports predictable set-up times and reduces the need for iterative adjustments on the machine spindle, contributing to higher first-pass accuracy on subsequent tool changes. Clear dimensional data enables straightforward planning Specification-driven procurement is simplified by the explicit measurements: D 68 mm overall diameter and the listed engagement depths. These values allow integration checks against existing turret or spindle fixtures during planning and spare-parts management. By relying on measurable characteristics rather than ambiguous descriptions, maintenance schedules and parts lists can be harmonised with inventory systems, supporting efficient material flow and reduced downtime in the production environment. Robust form and single-unit supply support workshop logistics The product is delivered as a single unit (packaging unit 1), suitable for targeted replacements and small-batch stocking. The Form Z2 geometry provides a standardised sealing solution that fits into established toolholding workflows, simplifying storage and reorder processes. For buyers consolidating suppliers, this standard form factor helps to reduce SKUs and eases identification in tool cabinets and ERP systems, improving procurement efficiency and traceability. Specification guidance and application relevance Intended for use with VDI30 toolholder interfaces, the part acts as a simple mechanical blanking device to close an opening according to the VDI/DIN standard geometry. The clear numeric data included with the item aids decision-making in workshops and production planning: the geometric values can be matched directly against toolholder drawings and machine documentation. For complex installations or non-standard toolholder variants, the Metav technical team can assist with compatibility checks and ordering advice. For tailored advice on specifying TECWERK closure plugs for a VDI30 system or to secure compatible stock, contact Metav Werkzeuge’s technical sales team in Emmerich — rapid clarification and supply from a dedicated precision partner are available by phone or email. Technical data SKU: 2000833696NW Article: Verschlussstopfen Z2 DIN 69880 VDI30 STA TECWERK Packaging unit: 1 Facts Form: Z2 d1: 30 mm A: 20 mm D: 68 mm Standard: DIN 69880 / VDI30 Special features Product type: closure plug / blanking plug Brand: TECWERK Supplied as single item FAQ What interface does this plug suit? The plug is designed for the VDI30 interface and conforms to the geometric references of DIN 69880 for Z2 form seating. Which dimensions are critical for fit verification? Key dimensions for verification are d1 30 mm, A 20 mm insertion depth and the D 68 mm overall diameter; these determine seat and clearance. Is this part supplied as a single unit or in sets? The item is supplied as a single unit (packaging unit 1), intended for individual replacement or selective stocking. Can this plug be used with other VDI interfaces? The component is specified for VDI30 with Form Z2 geometry; compatibility with other VDI sizes requires matching the corresponding form and dimensions. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
30mm Extension Nut M10 SW16mm Corner Size 17.8 - AMF
Take advantage of a compact, workshop-ready solution that combines standard M10 compatibility with a secure 16 mm spanner interface for reliable assemblies; order via Metav Werkzeuge or consult their specialists for application advice. Extension nut No. 6334 – M10 (SW 16 mm) by AMF Extension nut No. 6334 M10 extends threaded connections for assembly, repair and maintenance tasks where extra reach and a standard spanner fit are required. M10 thread for standard fastening Spanner width SW 16 mm for secure grip Overall height 30 mm for extended reach Robust design for workshop and maintenance use Faster assemblies with standard M10 compatibility The extension provides a straightforward way to lengthen an M10 threaded connection without altering the original component. With a clear designation of M10, this solution ensures compatibility with existing bolts and studs commonly used across industry and service workshops. By avoiding rework of base components, the element reduces machine downtime and simplifies maintenance planning. The compact form factor supports rapid handling during repetitive installation tasks while maintaining precise thread engagement. Secure torque transfer and improved access in confined spaces Designed with a spanner width of 16 mm and an overall height of 30 mm, the part delivers a secure contact surface for standard spanners and sockets, enabling consistent torque transmission. The recorded corner dimension of 17.8 mm aids clearance when working near flanges or recessed surfaces, reducing the risk of tool slippage and damage to adjacent parts. This combination of dimensions means assemblies can be accessed and tightened more reliably, improving operational safety and repeatability in workshop procedures. Workshop-grade reliability and streamlined supply Manufactured by AMF and supplied in single units, the component suits repair shops, plant maintenance teams and production support who prioritise consistent quality and immediate availability. The simple geometry and familiar interface make the part easy to stock and identify, contributing to efficient inventory management. For buyers seeking consolidated sourcing, Metav Werkzeuge offers a wide range of compatible fasteners and a practical supply chain anchored in Emmerich, combining accessibility with proven distribution expertise. For dependable M10 extensions and workshop-ready parts from AMF, contact Metav Werkzeuge for ordering and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833422NW Type: Nr. 6334 - M10 Label: Verlängerungsmutter Nr. 6334 M10 SW 16mm AMF Product type: Extension nut Manufacturer: AMF Packaging unit: 1 Facts Thread size: M10 Spanner width: 16 mm Overall height: 30 mm Corner dimension: 17.8 mm Special features Design: extension nut for threaded extension Application: assembly and maintenance Brand: AMF FAQ Is this compatible with standard M10 bolts? Yes. The AMF extension nut No. 6334 is specified for M10 threads and is compatible with standard M10 bolts and studs. Which tool size is required to tighten the part? A 16 mm spanner or socket is required; the product’s spanner width SW 16 mm provides a secure grip for standard workshop tools. What is the overall height and how does it affect accessibility? The overall height is 30 mm, offering added reach to access recessed or obstructed threaded connections compared with a standard nut. How is the item supplied for stock management? The product is supplied as a single unit (packaging unit 1) under article number 4000833422NW, suitable for targeted replenishment. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Extension Nut M10 SW17mm Corner Size 18.9 - AMF
Benefit from a compact, reliable thread extension that improves assembly reach and simplifies tightening with a standard 17 mm spanner; order directly via Metav Werkzeuge or ask the consultants for compatibility advice. AMF Extension Nut No. 6334 M10 – 30 mm, SW 17 The Extension Nut No. 6334 M10 is a precision extension nut designed to extend M10 threads in assembly, maintenance and fixture applications. Thread extension for M10 fittings 30 mm overall height for extended reach 17 mm wrench size for standard spanners Corner dimension 18.9 mm for compact seating Improved access and secure thread extension for assemblies The Extension Nut No. 6334 M10 provides a simple mechanical solution where an extended threaded connection is required. With an overall height of 30 mm, it enables reach past recessed components or through thicker panels without modifying existing fastenings. The primary advantage is operational efficiency: the component is designed for straightforward installation, so common tasks such as fitting into jigs or extending stud length are completed without auxiliary adaptors. The feature set supports consistent assembly processes and reduces the need for non‑standard parts. Reliable torque transfer with a 17 mm spanner fit A defined 17 mm wrench size allows controlled tightening with standard tools. The hex profile and the stated corner dimension of 18.9 mm ensure that torque is applied evenly and reliably, which helps to avoid rounding or slippage during assembly. In production or maintenance contexts, this predictable interface speeds up fastening cycles and reduces the risk of rework. Where precise clamping force is required, the hex size facilitates use of calibrated torque wrenches for repeatable results. Practical compatibility and stock handling for workshops Designed as a straight extension for M10 threads, the component is compatible with standard metric bolts and studs used across industrial, automotive and maintenance sectors. Supplied as a single unit (packaging unit: 1) and referenced by SKU 4000833423NW, it is simple to specify in procurement lists and inventory systems. The compact design supports efficient storage and fast retrieval, contributing to a streamlined workshop supply chain. Installation guidance and service resilience Installation is performed by engaging the nut onto the exposed thread and tightening with the correct spanner; routine checks of thread engagement depth are recommended to confirm secure seating. The simple geometry minimises potential points of failure and allows for quick replacement in service situations. For applications with specific material or surface treatment requirements, further technical details should be requested to ensure full compatibility with the operating environment. For secure M10 thread extensions trust AMF quality — contact Metav Werkzeuge for availability and expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833423NW Type: No. 6334 - M10 Label: Verlängerungsmutter Nr. 6334 M10 SW 17mm AMF Manufacturer: AMF Packaging unit: 1 Facts Overall height: 30 mm Wrench size: 17 mm Corner dimension: 18.9 mm Special features Product type: Extension nut Thread size: M10 Axial enrichment: Corner dimension 18.9 mm FAQ What thread size does this part support? The extension nut is specified for M10 threads and is intended for standard metric M10 bolts and studs. Which spanner or socket fits the hex profile? A 17 mm spanner is the correct tool size for the hex profile, matching the stated wrench size for consistent torque application. What is the overall height and why does it matter? The overall height is 30 mm, providing additional thread length for recessed or thick assemblies where extra reach is required. Is the corner dimension relevant for mounting? Yes, the corner dimension of 18.9 mm defines the seating envelope and helps ensure clearance in compact assemblies. How is the product supplied for ordering and stockkeeping? The item is supplied as a single unit (packaging unit: 1) under SKU 4000833423NW and is intended for straightforward procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Hex Nut M20 Flaired And Milled Strength Class 10, DIN 6331 - AMF
Take advantage of the combination of high tensile performance and precise fit to secure load-bearing joints with confidence; order directly via Metav Werkzeuge or consult the team for application advice. AMF hexagon nut DIN 6331 M20 — strength class 10, SW 30 mm The AMF hexagon nut DIN 6331 M20 provides a high-strength fastening solution for industrial and workshop assemblies, specified for M20 threads and designed for reliable clamping under load. Hexagon nut to DIN 6331 standard Thread size M20, strength class 10 Wrench size 30 mm for robust tightening Pressed and milled manufacturing, corner 33.5 mm Consistent high-strength performance for critical joints The M20 fastener is manufactured to DIN 6331 and rated strength class 10, delivering a clearly defined mechanical profile for demanding assemblies. This high strength classification indicates a fastener intended for elevated clamping forces and reduced risk of shear or tensile failure in service, which supports safer machine builds and structural joints. Specifying a component with a standardised class and norm reduces uncertainty in procurement and streamlines engineering documentation, making it suitable for production environments where reproducible results matter. Precise fit reduces assembly time and improves repeatability With a wrench size of 30 mm and an overall height of 30 mm, the geometry is optimised for mechanical accessibility and consistent torque application. The pressed and milled finish ensures accurate seating and minimal lateral play, while the corner measure 33.5 mm provides a clear reference for tightening tools and fixtures. These measurable dimensions simplify calibration of assembly processes and minimise rework: a tight fit and predictable tool engagement mean faster, safer installations and fewer interruptions on the shop floor. Industrial compatibility and predictable behaviour in assemblies Designed as a standard-compliant hexagon nut, this fastener integrates easily into existing bill of materials and clamping concepts. The production method and the strength class 10 rating contribute to long-term joint stability in applications subject to vibration or cyclical loading. For engineers and buyers seeking parts that conform to established specifications, the AMF part offers traceability and a dependable mechanical profile, supporting quality assurance routines and reducing the need for frequent replacements. For assistance selecting the correct AMF hexagon nut for specific applications or for ordering via Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s experts will advise on suitability and supply. Technical data Article number: 4000833415NW Manufacturer: AMF Product type: Hexagon nut Facts Thread size: M20 Standard: DIN 6331 Wrench size: 30 mm Overall height: 30 mm Corner measure: 33.5 mm Strength class: 10 Packaging unit: 1 Special features Pressed and milled manufacturing Designed for industrial assemblies Defined mechanical strength class FAQ What thread and standard does this nut follow? The AMF hexagon nut follows the M20 thread size and complies with DIN 6331 (SKU 4000833415NW), suitable for standardised engineering applications. What does strength class 10 signify for this fastener? Strength class 10 indicates a high-strength fastener designed for elevated clamping loads; the AMF nut’s classification supports use in applications requiring greater tensile performance. Which spanner or socket should be used for tightening? A 30 mm spanner or socket corresponds to the wrench size 30 mm specified for this hexagon nut and ensures correct tool engagement. How does the pressed and milled finish benefit assembly quality? The pressed and milled production reduces dimensional variation and improves seating, which helps achieve consistent torque results and reduces the need for rework. Is the material or coating specified for this nut? The provided product data for the AMF hexagon nut (SKU 4000833415NW) does not specify material or coating details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Hexagon Nut M20 DIN 6330B Strength Class 10, Corner Dimension 33.5 - AMF
Secure assemblies with the combination of Strength class 10, standard DIN 6330B conformity and M20 sizing for consistent performance; order directly via Metav Werkzeuge or consult our specialists for application guidance. Hexagon Nut DIN 6330B M20, SW 30 mm – AMF, Strength Class 10 A Hexagon Nut DIN 6330B M20 intended for high-tensile bolted joints in industrial and workshop applications. Conforms to DIN 6330B standard Strength class 10 for high loads M20 thread size for standard fittings Wrench size SW 30 mm for fast assembly Reliable connection for heavy-duty assemblies The Strength class 10 rating provides a clear, measurable advantage when securing load-bearing joints: higher tensile and proof loads reduce the risk of fastener failure under stress. Matched with the M20 thread size and a defined overall height of 30 mm, this hexagonal fastener ensures consistent thread engagement across repeated assemblies. Engineers and maintenance teams gain predictable clamping behaviour, which simplifies torque specification and quality checks in production or repair processes. Designed for efficient installation and maintenance A compact SW 30 mm hex profile speeds up manual and machine-assisted tightening, while the standardised geometry allows the use of common spanners and sockets across maintenance fleets. The nut’s conformance to DIN 6330B means interchangeability with other components specified to the same norm, reducing procurement complexity. Fewer tool changes and uniform torque targets translate into measurable time savings on assembly lines and during scheduled maintenance, supporting leaner workflows and lower downtime. Traceability and application fit for industry Marking and SKU traceability support inventory control and batch documentation for regulated sectors. The item is identified under SKU 4000833400NW and specified by its corner measure 33.5 mm and declared Strength class 10, which assists purchasing and quality departments in verifying compatibility with bolts and clamping elements. As a hexagonal fastener it suits a wide range of metal-joining tasks where standardised metrics and reproducible mechanical performance are priorities, from workshop repairs to machine assembly. Contact Metav Werkzeuge for tailored advice on integrating the AMF M20 hexagon nut into production processes and to request batch or specification data Technical data Article number: 4000833400NW Brand: AMF Type: M20 Facts Overall height: 30 mm Wrench size: 30 mm Thread size: M20 Corner measure: 33.5 mm Pack unit: 1 Strength class: 10 Standard: DIN 6330B Special features Hexagon profile for standard spanners High-strength designation for demanding joints Suitable for industrial and workshop applications FAQ What standard does this nut comply with? The nut is manufactured to DIN 6330B and delivered as the AMF M20 hexagon nut (SKU 4000833400NW), ensuring compatibility with components specified to the same norm. What mechanical class is the nut rated to? This fastener is specified as Strength class 10, providing elevated tensile and proof load capability for heavy-duty connections. Which spanner size is required for assembly? An SW 30 mm spanner or socket is appropriate for tightening the nut; the corner measure is specified as 33.5 mm for reference. Is the M20 size suitable for standard industrial bolts? The M20 thread size matches common industrial bolt dimensions and simplifies procurement and replacement workflows when standard metric fasteners are used. How is the product identified for ordering and inventory? Order and inventory identification can be made using SKU 4000833400NW; the listing includes the type M20 and strength class details for precise selection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Morse Taper Sleeve MK2 For Steel Tool Holder With Ejector Screw - TECWERK
Take advantage of precise adaptation between Morse taper spindles and interchangeable holders: robust compatibility with steel holder head A, MK2 taper seating and a 30 mm bore ensure repeatable clamping and quick changeover. Order the TECWERK taper sleeve directly via Metav Werkzeuge or consult our advisors for application advice. Morse taper sleeve for steel holder head A, MK2, ø30 mm — TECWERK The Morse taper sleeve for steel holder head A serves as a compact adaptor to fit MK2 interchangeable holders with a cylindrical bore into standard Morse taper toolheads for reliable clamping in metalworking environments Fits MK2 shaft taper Compatible with steel holder head A 30 mm bore diameter Supplied with ejection screw Secure adaptation for interchangeable holders that reduces setup time The adaptor sleeve converts between taper systems to permit the use of interchangeable holders in spindles designed for Morse tapers. By providing a concentric, repeatable seating surface, the component reduces axial play and improves tool run-out, which directly benefits machining accuracy. The MK2 taper specification and the 30 mm internal diameter are engineered to deliver a tight fit for holders with a cylindrical bore, decreasing the need for frequent re-clamping and streamlining changeovers in workshop workflows. Faster removal and safe handling thanks to the ejection mechanism An integrated ejection screw simplifies removal of the sleeve from the toolhead without resorting to excessive force or improvised extraction methods. This controlled removal protects both the spindle and the adaptor from damage, shortening maintenance intervals. The mechanical aid supports safer, more predictable operations during routine tool changes and reduces mechanical shock to assemblies, contributing to longer service life for connected tool-holding components. Clear compatibility and installation guidance for the workshop Designed for use with steel holder head A and MK2 shaft systems, the adaptor is suitable where interchangeable holders with cylindrical bores are already employed. The straightforward geometry means installation and alignment can be performed with standard workshop tooling; no special fixtures are required. For procurement and inventory purposes the sleeve is supplied as a single unit, making stock management and replacement planning simple for production teams and service departments. Robust choice for consistent clamping in mixed setups Manufactured under the TECWERK designation, the sleeve functions as a practical solution for shops aiming to unify tool-holding across machines with differing taper standards. The component emphasises functional reliability and repeatability rather than decorative finish; the result is dependable performance in daily machining tasks and reduced downtime from misfitted holders. For operations valuing predictable process quality, this adaptor supports consistent machining results across batches. For precise adaptation of MK2 holders to Morse taper toolheads, contact Metav Werkzeuge to arrange supply of the TECWERK Morse taper sleeve and benefit from direct assistance from our Emmerich team; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832176NW Label: Morsekonushülse f.Stahlhalterkopf A f.Wechselhalter MK2 AD 30mm TECWERK Manufacturer: TECWERK Core specifications Shaft version: MK2 Bore diameter: 30 mm Special features Suitable for: steel holder head A For interchangeable holders with cylindrical bore Includes ejection screw Packaging unit: 1 UID: 2000832176NW FAQ Is this adaptor compatible with MK2 toolholders? The Morse taper sleeve is specified for MK2 shaft versions and is designed to accept interchangeable holders with a cylindrical 30 mm bore, ensuring compatibility with MK2 toolholders. Can the sleeve be used with a steel holder head A? Yes, the component is intended for use with steel holder head A and provides a secure seating for such assemblies in Morse taper spindles. How is the sleeve removed from the spindle after use? Removal is facilitated by the supplied ejection screw; this allows safe and controlled extraction of the sleeve from the toolhead without impact on the spindle. Is the adaptor supplied as a single item or in sets? The product is supplied as a single unit (packaging unit 1) and is listed under SKU 2000832176NW for straightforward reordering. Does the TECWERK sleeve improve repeatability in tool clamping? By providing a concentric seating surface for interchangeable holders, the sleeve improves repeatability and reduces run-out, supporting more consistent machining tolerances. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
30mm Quick-Change Tool Holder Head AA With 12.5mm Bore, 40-Position Indexing - TECWERK
Take advantage of a combination of rapid tool changes, 0.01 mm repeatability, and hardened, ground contact surfaces for reliable set-ups and reduced downtime; order the component directly via Metav Werkzeuge or consult our specialists for integration advice. TECWERK Quick-change tool holder head Gr. AA — eccentric clamping, 40 indexing positions The TECWERK quick-change tool holder head Gr. AA is a compact clamping interface for rapid exchange of cutting tools while preserving high positioning accuracy in turning and live tooling applications. *Eccentric clamping for fast exchanges *Repeatability of 0.01 mm for consistent set-ups *40 indexing positions at 9° increments *Hardened and ground gearing and contact faces Faster changeovers with industrial repeatability The design centres on eccentric clamping, enabling quick replacement of cutting inserts and holders without lengthy re‑alignment procedures. Thanks to a declared repeatability of 0.01 mm, setups remain consistent across tool swaps, which reduces scrap and shortens machine idle time. For production environments where cycle time and reliable tolerances matter, this component provides a measurable productivity gain without extra calibration effort. Precise angular positioning for indexed tooling A hardened tooth ring with 40 indexing positions allows positional adjustments in 9° steps, offering flexibility when arranging tool angles or using multiple insert types. The hardened and ground gear and support surfaces deliver repeatable seating and low backlash; this ensures that each indexed position returns to its nominal orientation and maintains cutting geometry, which is especially beneficial for multi‑operation tool turrets and modular tool systems. Compact reach and secure central bore With a 12.5 mm centre bore and a 30 mm maximum reach, the tool holder head suits compact toolholders and short overhang configurations where rigidity is critical. The centre bore facilitates secure mounting to the central body, while a simple set screw allows fine adjustment of tip height, removing guesswork during final set-up. The combination of a short projection and precise adjustment reduces deflection and improves surface finish on turned components. Robust construction to lower maintenance needs Critical contact areas are hardened and ground, improving wear resistance and ensuring a long service life under repetitive indexing and clamping cycles. The eccentric clamping mechanism is engineered for reliable retention and quick action, which lessens the likelihood of unplanned stops for rework. When paired with proper maintenance intervals, this tool holder head supports sustained machine availability and predictable process capability. Contact Metav Werkzeuge for technical clarification or to discuss system compatibility for the TECWERK quick-change tool holder head Gr. AA — our Emmerich team will advise on integration and delivery from stock Technical data Article number: 2000832150NW Product type: AA Product name: Schnellwechselstahlhalterkopf Gr.AA TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Centre bore: 12.5 mm Max reach: 30 mm Indexing positions: 40 Index angle step: 9° Repeatability: 0.01 mm Special features Eccentric clamping for rapid tool changes Hardened and ground gearing and plan contact face Tip height adjustable via set screw Designed for repeatable exchanges of cutting tools FAQ What degree of repeatability can be expected from this tool holder head? The TECWERK quick-change tool holder head Gr. AA delivers a repeatability of 0.01 mm, ensuring consistent return to the preset position after each exchange. How many angular positions does the index allow and what is the step size? The tool holder head provides 40 indexing positions, each corresponding to a 9° increment for precise angular adjustment. Which bore diameter and maximum reach are provided? The central bore measures 12.5 mm and the maximum reach from bore centre to end edge is 30 mm, facilitating compact and rigid mounting. Is the contact surface wear-resistant for high-frequency use? Yes, the contact faces and the tooth ring are hardened and ground, improving wear resistance and maintaining seating accuracy over many cycles. Can the cutting tip height be adjusted after mounting? Tip height is settable via a set screw at the toolholder, allowing fine correction without removing the assembly. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
30mm Screw Vice Attachment Nr. 6441 With 12mm Insert Pin, Prism Jaw 65mm - AMF
Compact, low-profile clamping with a Ø12 mm insertion pin and prism jaw AD 65 mm for secure support of cylindrical parts; adaptable clamping range D1 22–100 mm. Order directly via Metav Werkzeuge or consult the technical team for integration advice. Schraubbockaufsatz No. 6441 — screw-vice adaptor with Ø12 mm insertion pin and prism jaw AD 65 mm (AMF) Schraubbockaufsatz No. 6441 is a compact screw-vice adaptor designed to provide stable, repeatable clamping for workshop and production environments using a prism geometry for cylindrical and profiled components Compact low-profile design with 30 mm height Insertion pin Ø 12 mm for secure mounting Prism jaw AD 65 mm for stable support Clamping range D1: 22–100 mm Stable prism support for round and profiled components The prism jaw geometry delivers reliable seating of cylindrical workpieces by spreading contact along a defined line rather than at a single point. The prism jaw AD 65 mm secures shafts and rods with reduced slippage and improved concentricity, which is particularly beneficial for turning-in-place or light finishing operations. With a clamping range of D1 22–100 mm, the adaptor covers a wide span of common workshop diameters, reducing the need for frequent jaw changes and streamlining setup procedures. Fast insertion and compact footprint shorten setup time Fitted with an insertion pin Ø 12 mm, the adaptor enables quick installation into compatible vice sockets, cutting downtime between jobs. The height 30 mm provides a low-profile solution that maintains clearance for machining operations while keeping the clamped centre close to the workplane, which helps preserve machining geometry and reduces vibration. These features together support higher throughput and simpler changeovers in repetitive or small-batch production. Designed for reliable workshop integration and consistent results Built as a dedicated screw-vice adaptor, the component ensures consistent positioning across repeated setups and is suited for general workshop machining tasks where accurate axial support is required. The clear specification of mounting and clamping dimensions simplifies machine planning and inventory management. Where precision seating and repeatability matter, this adaptor contributes to predictable process outcomes and reduced rework. Contact Metav Werkzeuge for tailored advice and reliable supply of the AMF screw-vice adaptor No. 6441, including information on matching vice sockets and application recommendations Technical Data Article number: 4000833137NW Type: Nr. 6441 Label: Schraubbockaufsatz Nr.6441 Einsteckzapfen-D.12mm Prisma AD 65mm AMF Product type: Schraubbockaufsatz Manufacturer / Brand: AMF Facts Height: 30 mm Insertion pin Ø: 12 mm Prism jaw AD: 65 mm Clamping range D1: min. 22 mm / max. 100 mm Packaging unit: 1 UID: 4000833137NW Special features Compact, low-profile adaptor Prism geometry for cylindrical support Quick-mount insertion pin Suitable for workshop and production setups FAQ What clamping diameters does the adaptor support? The adaptor supports a clamping range of D1 22–100 mm; the prism jaw AD 65 mm provides stable seating across that span for shafts and rods when using the Schraubbockaufsatz No. 6441 (AMF) What is the insertion pin diameter and mounting height? The adaptor uses an insertion pin Ø 12 mm and has a height of 30 mm, dimensions specified for straightforward mounting into vices that accept a 12 mm locating pin Is the adaptor suitable for cylindrical workpieces only? The prism jaw is optimised for cylindrical and profiled components, offering line contact that reduces slippage; it can also support certain profiled parts where a prism seating is appropriate Are material and coating details provided for the adaptor? Material and coating information are not specified in the available product data for the Schraubbockaufsatz No. 6441; further technical details can be requested if required Which product code identifies this adaptor? The adaptor is listed under article number 4000833137NW and type Nr. 6441, marketed by AMF Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Vertical Assembly Aid, DIN 69871A - Vertex
Take advantage of a compact, standards‑compliant mounting solution that pairs a DIN 69871A interface with a 30 mm tool connection for reliable vertical positioning; order the assembly aid via Metav Werkzeuge or consult the sales team for integration advice. VTS-SK30 Vertical Assembly Aid (DIN 69871A, 30 mm interface) The VTS-SK30 is a vertical assembly aid designed for precision mounting and stable positioning tasks in workshops and production environments. DIN 69871A interface for spindle compatibility 30 mm interface for standard toolholders Robust construction for stable mounting Compact vertical aid, 11.9 kg for secure positioning Precise vertical positioning for repeatable assembly results The VTS-SK30 functions as a dedicated vertical assembly aid, engineered to ensure consistent alignment during installation and fixture work. Its DIN 69871A compatibility guarantees straightforward integration with standard spindle systems, reducing setup complexity and downtime. Because the unit provides a firm connection through its 30 mm interface, operators benefit from improved repeatability and fewer alignment adjustments, which is especially relevant for serial assembly and precision retrofit tasks where every millimetre saved on rework translates into measurable productivity gains. Seamless integration into existing tooling systems Designed for direct fitment to spindle-compatible toolholders, this mounting solution simplifies tool exchange and machine layout planning. The 30 mm interface is compatible with common toolholder standards, enabling technicians to use familiar holders and adaptors without additional modification. Integration is thus faster and less error‑prone, supporting leaner workflows on the shop floor. Clear compliance with the DIN 69871A norm offers procurement and production planners a verifiable specification to include in technical documentation and machine compatibility checks. Stable construction that supports reliable operation At a net mass of 11.9 kg, the vertical aid provides a solid, vibration‑resistant base for assembly operations, improving contact steadiness and reducing the risk of positional drift during critical mounting steps. The device’s weight and design deliver stable mounting characteristics suitable for repetitive use in production cells and workshop benches. This stability contributes to lower scrap rates and higher first‑pass quality, a meaningful advantage where precise component seating and alignment influence downstream assembly performance. Contact Metav Werkzeuge today for procurement guidance or to discuss how the Vertex VTS-SK30 vertical assembly aid can be integrated into existing production setups, with logistic support and expert advice from our Emmerich team. Technical Data Article number: VTS-SK30 GTIN: 4061905083440 Norm: DIN 69871A Facts Interface diameter: 30 mm Weight: 11.9 kg eClass: 21029203 Special features Vertical assembly aid Compatibility with DIN 69871A toolholders Category: Vertex Product image available FAQ Is the VTS-SK30 compatible with standard tool spindles? The VTS-SK30 vertical assembly aid conforms to DIN 69871A, enabling compatibility with spindles and toolholders that follow this standard. What is the interface size and what does it mean for tool selection? This assembly aid uses a 30 mm interface, which accepts holders and adaptors designed for that diameter, simplifying tool choice and reducing the need for special adapters. How heavy is the unit and does that affect handling? The device weighs 11.9 kg, providing stable mounting during operation; handling considerations are typical for the weight class and suitable lifting aids are recommended for frequent repositioning. Can the VTS-SK30 be used in serial production environments? Yes, the robust design and standardised interface make the VTS-SK30 suitable for repetitive assembly tasks and production cells where consistent alignment and reduced setup time are priorities. Does the product require any special accessories to fit existing machines? In many cases the DIN 69871A compatibility and 30 mm interface allow direct integration with existing toolholders; confirmation against machine tool specifications is advised before procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
30mm x 20mm x 20mm Horseshoe Magnet AlNiCo 500 45N Holding Force, 5.2mm Bore - TECWERK
Take advantage of the compact AlNiCo 500 construction and 45 N holding force for reliable fixture and positioning tasks; the compact dimensions and 5.2 mm mounting hole enable quick integration into confined assemblies. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Horseshoe magnet L30 x 20 x 20 mm – AlNiCo 500, 45 N holding force (TECWERK) A horseshoe magnet L30 x 20 x 20 mm engineered for precise holding and positioning in workshop jigs, assembly fixtures and light industrial applications. Strong 45 N holding force for reliable fixing Compact dimensions 30 x 20 x 20 mm for tight spaces 5.2 mm mounting hole for secure attachment Reliable holding where space is limited The compact cast of this magnet combines a low installation footprint with a measurable holding force of 45 N, making it suitable for small jigs, temporary fixturing and component retention. The small overall size 30 x 20 x 20 mm minimises intrusion into assemblies and allows integration where larger magnets would be impractical. The clear numerical specification of the hold gives planners and technicians a predictable basis for fixture design, reducing trial-and-error during assembly layout and improving throughput in repetitive tasks. Simple, durable mounting and installation A dedicated 5.2 mm mounting hole provides a standardised fixing point for screws or studs, speeding up installation and ensuring repeatable alignment in production setups. The presence of a defined mounting aperture means the magnet can be anchored securely without bespoke adaptors, which shortens setup time and lowers the complexity of retrofits. The data also shows a lacquer curing temperature of 200 °C, which is relevant when the part is exposed to elevated temperatures during assembly processes that include painted or baked components. High-temperature capability and material clarity Constructed from AlNiCo 500, this magnet features a specified maximum operating temperature of 450 °C, allowing use in hotter environments where standard ferrite magnets would lose performance. That rated temperature provides a clear technical advantage for fixtures exposed to heat or for processes that include thermal steps. The explicit material listing and temperature figures help maintenance and design teams choose the correct magnetic solution without ambiguity, supporting long-term reliability in demanding conditions. Practical benefits for workshop and light industrial use Compact size, measurable holding force and a standardised mounting option translate into tangible savings in assembly time and fixture complexity. Where repeatable positioning and easy replacement are priorities, the physical specifications make decisions straightforward: planners can calculate expected retention, fit the magnet with standard fasteners and plan for thermal exposure up to the stated limit. The product’s concise technical data supports procurement and inventory decisions and reduces the need for specialist conversion parts. For temperature-critical fixtures or compact retention needs, consider the TECWERK horseshoe magnet and contact Metav Werkzeuge for tailored advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise application support Technical Data Article number: 4000832261NW SKU: 4000832261NW Brand: TECWERK Product type: Horseshoe magnet Facts Dimensions: 30 x 20 x 20 mm Holding force: 45 N Mounting hole diameter: 5.2 mm Maximum operating temperature: 450 °C Lacquer curing temperature: 200 °C Packaging unit: 1 Special features Material: AlNiCo 500 Compact horseshoe design Suitable for high-temperature applications Standardised mounting hole for simple fixing FAQ What is the holding capacity of this magnet? The magnet provides a holding force of 45 N, specified for the TECWERK horseshoe magnet (SKU 4000832261NW). Can this magnet be used in high-temperature environments? Yes. The magnet is made from AlNiCo 500 and is rated for a maximum operating temperature of 450 °C, which allows use in many elevated-temperature applications. How is the magnet mounted in an assembly? A 5.2 mm mounting hole is provided for secure attachment with standard screws or studs; the compact 30 x 20 x 20 mm form factor aids installation in confined spaces. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
30x300 mm Cylindrical Test Mandrel, Both Ends Centre‑Drilled, Runout Accuracy 0.005 mm - Metav IndustryLine
Take advantage of precise runout control and robust construction for consistent inspection results; the combination of 0.005 mm runout accuracy and hardened gauge steel provides measurable repeatability on shop and metrology benches. Order the inspection mandrel directly via Metav Werkzeuge or contact our consultants for specification advice. Inspection mandrel M318.911 — cylindrical test mandrel, Ø30×300 mm, runout accuracy 0.005 mm (Metav IndustryLine) An Inspection mandrel M318.911 designed for high-precision runout checks in component inspection and assembly fixtures, offering a compact diameter with extended length for versatile gauging tasks across production and quality control environments. Cylindrical inspection mandrel Ø30×300 mm Runout accuracy 0.005 mm Hardened gauge steel construction Both ends centred for secure mounting Consistent runout verification for reliable quality control The mandrel delivers a measurable runout accuracy of 0.005 mm, which translates into tighter process control and fewer escaped defects during assembly and finishing. By using a fixed-diameter, straight shaft the operator benefits from reduced measurement scatter and improved repeatability compared with ad‑hoc fixturing. Where concentricity and spindle alignment affect downstream performance, this tool enables quick go/no‑go checks and objective documentation of part condition, reducing rework and protecting downstream processes. Robust materials and centred mounting for stable measurements Manufactured from hardened gauge steel, the mandrel combines stiffness with wear resistance to preserve geometry over repeated use. The shaft’s Ø30 mm section and 300 mm overall length maintain adequate rigidity for medium-length components while the specification of both ends centred ensures reproducible mounting in chucks or fixtures. The resulting stability means fewer positional deviations during rotation, allowing measurement instruments and dial indicators to record truer values with less need for operator compensation. Practical integration into inspection workflows Designed as a straightforward go‑to tool for runout inspection, the mandrel fits into existing benches and inspection routines without complex setup. Its solid construction and clear dimensional spec simplify traceability in quality records and make it suitable for routine checks in machine shops, toolrooms and incoming inspection. The compact footprint eases handling between fixtures; the clear numeric tolerance facilitates immediate decision making in first‑article inspections or batch sampling. For assured runout control and integration into existing inspection setups, contact Metav Werkzeuge for ordering and technical advice on the M318.911 inspection mandrel Technical data Article number: M318.911 GTIN: 4054469183831 Material: hardened gauge steel Dimensions: Ø30×300 mm Weight: 3.3 kg Runout accuracy: 0.005 mm Facts Diameter: 30 mm Length: 300 mm Runout tolerance: 0.005 mm Weight: 3.3 kg Category: Gauges Special features Both ends centred for mounting Hardened gauge steel construction Category: Gauges (Lehren) Suitable for runout inspection and alignment checks FAQ What is the primary purpose of this inspection mandrel? The inspection mandrel M318.911 is intended for checking and verifying runout accuracy of shafts and bores, providing a fixed reference for concentricity and alignment checks. Which materials is the mandrel made from and why does that matter? The shaft is manufactured from hardened gauge steel, chosen for dimensional stability and wear resistance so that the mandrel maintains geometry and repeatable results over time. How is the mandrel mounted during an inspection? The mandrel features both ends centred, allowing secure mounting in chucks, collets or fixture spindles to ensure stable rotation and reproducible measurement conditions for runout assessment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
31.6mm Centre Drill Type 665 Full Tip 60° 160mm Overall Length MK4 - RÖHM
Take advantage of the proven combination of a 60° precision tip, a full solid point and a standard MT4 taper for reliable axial support and accurate alignment in routine turning operations; order directly via Metav Werkzeuge or consult the Metav team for application advice. Centre Point Type 665 (MT4) — RÖHM fixed full-point, 60° tip The Centre Point Type 665 (MT4) is a fixed centre designed to provide accurate axial support and repeatable alignment in machining applications, especially for turning and light drilling operations where a robust, full-point support is required. Solid centre point with full tip 60° precision tip angle MT4 Morse taper shank Hardened and ground tool steel Accurate alignment for consistent concentricity Designed as a workshop-grade centring solution, this fixed centre delivers precise axial locating with a 60° tip that matches standard lathe centres and tailstocks. The full point construction provides a continuous contact area under load, reducing point deflection and helping to maintain consistent concentricity during rotation. For production environments where repeatability matters, the combination of the tip geometry and the taper connection ensures minimal runout and clearer quality control of turned features. Robust construction for reduced maintenance Manufactured from tool steel and fully hardened and ground, the component resists wear and preserves its geometry under regular use. This hardening treatment prolongs the service life of the point, reducing the frequency of replacement and the associated downtime. The resilient design is particularly advantageous where axial loading or intermittent shock occurs during set-up and short production runs, enabling workshops to rely on the centre point as a durable locating element. Simple integration with standard machines The product uses a standard MT4 Morse taper shank, enabling straightforward mounting in compatible spindles, tailstocks and adaptor systems without special fittings. The taper provides secure retention and accurate axial positioning so the point can be transferred between machines with consistent performance. With a total length of 160 mm and a nominal diameter of 31.6 mm, the geometry is suited to common centre-holding setups while offering sufficient projection for a range of workpiece sizes. Practical benefits at the workbench Beyond technical performance, the component simplifies routine set-up and inspection tasks: the clear tip geometry makes contact points easy to visualise, and the solid construction reduces the risk of tip breakage during handling. For smaller shops and industrial lines alike, this results in faster set-ups and fewer interruptions. The product is offered as a single unit per package and carries the legacy of a recognised brand, which supports confidence in everyday workshop use. For a dependable RÖHM centre point with a hardened 60° tip and MT4 shank, contact Metav Werkzeuge for supply and tailored advice — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4121011131NW Type: Typ 665 Product: Centre point (fixed) Facts Diameter: 31.6 mm Total length: 160 mm Projection: 57.5 mm Tip angle: 60° Shank: MT4 Packaging unit: 1 Special features Fully hardened and ground Made from tool steel Full/solid centre point Fixed centre design Brand: RÖHM FAQ What machines are compatible with this centre point? The centre point is designed for machines with an MT4 Morse taper socket; it fits standard tailstocks and spindles that accept an MT4 shank and provides stable axial support during turning. How does the 60° tip affect performance? A 60° tip offers the common geometry for lathe centres, ensuring predictable contact and alignment; the full-point design of the Type 665 spreads load and reduces localised wear. Is the centre point suitable for heavy-duty turning? The fully hardened and ground tool steel construction increases wear resistance, but the fixed full-point design is optimised for axial support and medium-duty operations rather than large-scale heavy cutting. How should the point be maintained to preserve accuracy? Keep the full point clean and free from chips or coolant residue; periodic visual inspection and gentle cleaning after use will help maintain tip geometry and concentric performance. What is the exact designation for ordering? Order the RÖHM Centre Point Type 665 (MT4) using article number 4121011131NW for accurate reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
31.8mm Button Magnet With Split Contact Area And Through-Hole, Holding Force 48 N, Max Temp 450 °C - TECWERK
Take advantage of a compact magnetic fastening solution that combines AlNiCo 500 temperature resistance and a reliable holding force of 48 N for stable fixture work; order directly via Metav Werkzeuge or consult our specialists for delivery from Emmerich. Button magnet D31.8×H25.4 mm – TECWERK with split contact face and through-hole, high-temperature resistant The Button magnet D31.8×H25.4 mm by TECWERK is a compact magnetic fastening element designed for industrial fixtures and tooling where elevated temperatures and secure fixing are required. AlNiCo 500 magnet material for high-temp use Split contact surface for improved grip Through-hole Ø7.1 mm for secure fixing Holding force 48 N for compact fastening High-temperature performance for demanding applications Made from AlNiCo 500, this round magnetic element is engineered to maintain magnetic stability at elevated temperatures, enabling use in processes where heat resistance is essential. The specification of a maximum operating temperature of 450 °C means the magnet can be integrated into fixtures exposed to heat during soldering, brazing or thermal processing. Explaining the material: AlNiCo alloys combine aluminium, nickel and cobalt to provide predictable magnetic behaviour under heat; this reduces the risk of sudden demagnetisation and supports consistent performance in industrial cycles. Secure fixing thanks to split contact face and through-hole The combination of a split contact surface and a through-hole Ø7.1 mm offers both improved surface contact and reliable mechanical fastening. The divided face increases real contact area on uneven surfaces, improving shear resistance, while the central through-hole permits the use of a screw or pin for positive location. Together these features reduce slippage and make the element suitable for jigs, small fixtures and clamping aids where repeatable positioning and mechanical restraint are required. Compact design with dependable holding power Despite its modest size, this circular magnet delivers a holding force of 48 N, providing secure retention for small tooling parts and workpieces. The combination of compact geometry and magnetic strength allows integration into confined assemblies or retrofit of existing fixtures without major changes. In practice, the element serves as a space-efficient magnetic fastener when a balance of grip and compactness is required, and it performs best where moderate clamping is needed rather than heavy structural loads. Practical notes for installation and material handling The part is supplied individually and includes a through-hole for mechanical fixing, simplifying installation into plates or brackets. The product accepts a coating bake temperature of 200 °C, enabling painted or lacquered assemblies without compromising magnetic behaviour when following the stated bake limits. For procurement and delivery, the item is available as a single unit, and its features support use in production, assembly jigs and thermal process environments where a durable, compact magnetic solution is required. For high-temperature fixture needs, choose the TECWERK button magnet and contact Metav Werkzeuge for expert advice and reliable supply from Emmerich — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 4000832268NW Product type: Button magnet Material: AlNiCo 500 Execution: with split contact surface and through-hole Manufacturer: TECWERK Facts Diameter: 31.8 mm Height: 25.4 mm Through-hole diameter: 7.1 mm Holding force: 48 N Maximum operating temperature: 450 °C Coating bake temperature: 200 °C Packaging unit: 1 Special features Split contact surface Through-hole Ø7.1 mm for mechanical fixing High temperature resistance (AlNiCo 500) Suitable for heat-exposed fixtures and tooling FAQ What material is the magnet made from and why does that matter? The magnet is manufactured from AlNiCo 500; this alloy maintains magnetic stability at elevated temperatures, which is why the Button magnet D31.8×H25.4 mm (TECWERK, SKU 4000832268NW) is specified for applications up to 450 °C. How strong is the magnetic holding force? The component provides a holding force of 48 N, offering secure retention for light to medium clamping tasks in jigs and small fixtures. Can the magnet be mechanically secured? Yes — the device features a through-hole of 7.1 mm diameter that allows mechanical fixing with a screw or pin for positive location and improved resistance to shear forces. What are the temperature limits for use and coating? Maximum operating temperature for the magnet is 450 °C; the permitted coating bake temperature is 200 °C, so painting or lacquering processes must respect this limit. How is the product supplied? The item is supplied as a single unit (packaging unit 1); the SKU is 4000832268NW and the product type is a button magnet from TECWERK. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com