Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
310mm Chuck Precision 0.03mm Accuracy 5700 kgf Clamping Force 1800 rpm - Vertex
Robust clamping performance with precise concentricity and a 310 mm gripping diameter make this workholding solution well suited for heavy turning tasks; the combination of 5,700 kgf clamping force and 0.03 mm accuracy supports consistent part quality and fewer rework cycles. Order the VSK-12 chuck directly via Metav Werkzeuge or ask our consultants if needed. Vertex VSK-12 310 mm chuck — 5,700 kgf clamping force, 0.03 mm accuracy The Vertex VSK-12 is a precision chuck designed for demanding workholding in turning and heavy-duty machining applications. High clamping force 5,700 kgf 310 mm gripping diameter for large parts Accuracy 0.03 mm for consistent concentricity Rated top speed 1,800 rpm Engineered for secure heavy-duty clamping The workholding device delivers a clamping force of 5,700 kgf, which translates into reliable retention of heavy or high-torque components during machining. A larger 310 mm diameter increases the usable clamping surface, enabling secure handling of sizeable workpieces without resorting to complex fixtures. By concentrating on measurable performance, the chuck reduces the likelihood of slippage and vibration, supporting uninterrupted production cycles and improving overall throughput. Precision that lowers rejects and machining time With a stated accuracy of 0.03 mm, the chuck ensures close concentricity between the spindle axis and the clamped part, which directly reduces setup time and the need for corrective finishing. The specified maximum speed of 1,800 rpm allows safe operation within common turning ranges while maintaining the declared tolerance. These characteristics make the device appropriate where dimensional consistency matters, converting technical performance into tangible cost-saving benefits through fewer rejects and less downstream grinding or rework. Workshop integration and operational reliability Weighing 39.3 kg, the chuck balances mass for stability with practical handling in a machine-shop environment. The component’s design supports straightforward installation on compatible spindles and stable operation under load, contributing to predictable cycle times. For procurement and supply security, Metav provides access to comprehensive assortments and logistical support from Emmerich, acting as a quality filter for European workshops and ensuring steady availability of precision workholding solutions. For robust heavy-duty turning applications, specify the Vertex VSK-12 and consult Metav Werkzeuge for configuration advice and reliable delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance Technical data Article number: VSK-12 GTIN: 4061905086816 Manufacturer: Vertex Facts Diameter: 310 mm Clamping force: 5,700 kgf Accuracy: 0.03 mm Max. speed: 1,800 rpm Weight: 39.3 kg eClass: 21020590 Special features Product type: Chuck Category: Vertex SKU: VSK-12 Image available: yes FAQ What materials is this chuck suitable for clamping? The Vertex VSK-12 chuck is a general-purpose workholding device intended for a wide range of turning operations and is commonly used with ferrous and non-ferrous components within the machine’s and tooling system’s limits. How does the stated accuracy affect finished parts? An accuracy of 0.03 mm with the VSK-12 minimises runout, resulting in improved concentricity and reduced need for secondary machining, which helps maintain consistent part tolerances. Can the chuck run at high spindle speeds? The VSK-12 is rated to a maximum of 1,800 rpm; this specification should be matched with the machine and tooling to ensure safe, vibration-free operation. What does the clamping force value indicate in practice? A clamping force of 5,700 kgf indicates the holding strength under normal operating conditions, supporting the secure retention of larger or heavier workpieces during machining cycles. Is the chuck compatible with standard lathe spindles? Compatibility depends on the spindle interface; the VSK-12 is designed for common industrial machine arrangements, but spindle mounting details should be confirmed against the machine’s specification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
310mm Self-Centring Four-Jaw Square Lathe Chuck, 2,250 kgf Clamping Force, 0.03mm Accuracy - Vertex
Take advantage of the combination of 2,250 kgf clamping force and 0.03 mm accuracy to secure heavy workpieces reliably while maintaining concentricity; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. VMJ-12 four-jaw self-centring chuck — 2,250 kgf clamping force, 0.03 mm accuracy VMJ-12 is a four-jaw, self-centring chuck designed for secure holding of square and round workpieces in demanding turning operations Self-centring four-jaw design for quick set-up 2,250 kgf clamping force for heavy-duty holding 0.03 mm accuracy for precise concentricity Robust 62.8 kg construction for vibration damping Secure heavy-duty clamping with measurable holding power The VMJ-12 combines a self-centring mechanism with high mechanical grip to deliver repeatable holding force where rigidity matters. The rated 2,250 kgf clamping force ensures firm contact between jaws and workpiece, reducing slippage during heavy cuts and interrupted machining. For production environments that demand consistent torque transmission and reduced rework, this chuck offers a reliable physical solution that shortens set-up time and increases spindle utilisation. Achieve accurate concentricity for precision turning With an indicated accuracy of 0.03 mm, the chuck supports tight concentricity tolerances required for fine turning and finishing operations. This level of precision translates into improved part run-out, better surface finish and reduced secondary machining. For users less familiar with metrology terms: 0.03 mm indicates the maximum deviation from true rotation under specified conditions, so fixtures and tools can be adjusted with confidence to meet inspection criteria. Stability and mass for vibration control and surface quality The unit’s substantial mass (62.8 kg) and compact footprint (310 x 380 x 141 mm) contribute to mechanical stability on the spindle, attenuating vibrations that otherwise compromise tool life and dimensional consistency. The solid construction benefits heavy-duty and medium-duty lathes where inertia helps maintain steady cutting conditions. Reduced chatter and improved heat dissipation during long cycles are direct advantages of the chuck’s robust design. Simple integration and durable operation for industrial workflows The four-jaw, square-capable concept enables flexible clamping of diverse geometries without complex backplates; setup is straightforward and repeatable, supporting lean workflows. The chuck is classified under ECLASS 21020590, reflecting its positioning within industrial clamping technology. Routine maintenance is limited to standard lubrication and jaw checks, keeping downtime low and ensuring a long service life when paired with regular inspection practices. The Vertex design focuses on durability and compatibility with conventional turning centres. For demanding turning tasks, select the Vertex VMJ-12 with its 2,250 kgf holding capacity — contact Metav Werkzeuge in Emmerich for tailored application advice and assured delivery from our European hub. Technical data SKU: VMJ-12 GTIN: 4061905086380 Type: Four-jaw self-centring chuck Facts Clamping force: 2,250 kgf Accuracy: 0.03 mm Weight: 62.8 kg Dimensions: 310 x 380 x 141 mm Special features Self-centring four-jaw design Suitable for square and round workpieces ECLASS: 21020590 Manufacturer: Vertex FAQ What holding force can be expected from this chuck? The VMJ-12 provides a rated clamping force of 2,250 kgf, designed for secure holding during heavy-duty turning. How precise is the concentricity of the clamping system? Concentricity is specified at 0.03 mm, which supports tight run-out tolerances for precision turning operations. Is the chuck suitable for square stock as well as round bar? Yes, the self-centring four-jaw design accepts both square and round workpieces, enabling flexible setup for various part geometries. How does the mass of the chuck affect machining performance? At 62.8 kg, the chuck’s mass improves stability and vibration damping, contributing to better surface finish and extended tool life. Which standard or classification applies to this clamping device? This chuck is referenced under ECLASS 21020590, indicating its classification within industrial clamping equipment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
310mm Three-Jaw Chuck High Clamping Force 0.03mm Accuracy 5700 kgf, 1800r.p.m. - Vertex
Take advantage of a combination of strong clamping force and reliable precision for consistent turning results; the three-jaw chuck delivers secure holding at up to 1,800 rpm, supporting uninterrupted production. Order directly via Metav Werkzeuge or consult the team for application advice. VSC-12 three-jaw chuck – 310 mm diameter, 5,700 kgf clamping force (Vertex) The VSC-12 three-jaw chuck is a robust workholding device for turning applications, designed to grip a wide range of cylindrical parts securely and maintain concentricity during machining. Large 310 mm diameter for big workpieces High 5,700 kgf clamping force for secure hold Precision 0.03 mm runout accuracy Rated up to 1,800 rpm operational speed Stable clamping for uninterrupted turning The chuck’s design focuses on dependable holding power: with a 5,700 kgf clamping force and a 310 mm diameter capacity, the device secures medium to large components for turning operations. That level of grip reduces slippage and tool interruptions, which directly improves throughput. The mechanical configuration of the three-jaw chuck ensures uniform load distribution, so the workpiece remains centred under load—translating technical strength into a measurable production advantage. Precision that reduces rework and improves finish Accuracy plays a central role in reducing scrap. Featuring 0.03 mm runout accuracy, this chuck minimises off-centre turning and vibration, helping to achieve tighter tolerances and a better surface finish. For shops moving parts between setups, consistent concentricity reduces alignment cycles and secondary operations. The precise clamping performance therefore shortens machining times and lowers the risk of rework, delivering a clear return in efficiency and component quality. Engineered for workshop workflows and safe operation Rated for operation up to 1,800 rpm, the chuck is suitable for a wide range of lathe speeds while maintaining balance and stability. The three-jaw configuration is well suited to quick chucking and repeatable setups, which supports lean workflows on production lines and jobbing shops alike. Built to integrate into standard turning equipment, the device contributes to smoother changeovers and predictable cycle times — a practical advantage for busy workshop schedules. Discuss the Vertex VSC-12 with Metav Werkzeuge to ensure optimal integration in the production line; Metav Werkzeuge can advise on mounting and application requirements and supply directly from Emmerich. Technical Data Article number: VSC-12 GTIN: 4061905085932 Brand: Vertex Designation: Spannfutter Variant: with 3 jaws ECLASS: 21020590 Facts Diameter: 310 mm Clamping force: 5,700 kgf Accuracy (runout): 0.03 mm Max speed: 1,800 rpm SKU: VSC-12 Special features Three-jaw configuration High clamping force for robust holding Balanced for operation up to 1,800 rpm FAQ What size of workpiece can be held by this chuck? The chuck accommodates workpieces up to a nominal 310 mm diameter; the VSC-12 three-jaw chuck is intended for medium to large cylindrical parts. How does the specified accuracy affect turning quality? With 0.03 mm runout accuracy, the chuck helps maintain concentricity during machining, which improves surface finish and reduces the need for corrective rework on parts produced with the VSC-12. Is the VSC-12 suitable for high-speed turning? The device is rated up to 1,800 rpm, and it is balanced to operate reliably at that speed for standard turning applications. What kind of machines is this chuck compatible with? The three-jaw configuration is compatible with conventional lathes and turning centres that accept a chuck of this diameter and mounting type; specific mounting requirements should be confirmed for each machine. Can the chuck maintain grip on irregular or slightly tapered parts? The three-jaw design provides uniform radial clamping for round and near-round geometries; for irregular shapes, specialised jaws or workholding solutions may be required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
310x141mm Cross Slide Table 115mm Height, 16mm T-Slot, 20 Kg Load Capacity - Vertex
Take advantage of the combination of compact benchtop dimensions, secure 16 mm T-slot fixturing, and a 20 Kg load capacity for consistent, repeatable setups; order the unit directly via Metav Werkzeuge or contact our consultants for specification support. VCT-512 Cross Table by Vertex — 310 x 141 mm table, 16 mm T-slot The VCT-512 is a compact cross table designed for precision positioning and fixturing in small machine-shop and inspection applications, offering a stable platform for light milling, drilling and measurement tasks. Precision table 310 x 141 mm 16 mm T-slot for versatile fixturing Max load 20 Kg for stable machining Consistent positioning for accurate results The cross slide delivers repeatable travel across both axes, based on a machined table area of 310 x 141 mm that supports precise workpiece alignment. The solid construction and a listed weight of 16.5 kg reduce vibration during cutting and measuring, which improves surface finish and measurement reliability. For workshops seeking predictable throughput, the combination of compact size and mass reduces the need for frequent rework and simplifies set-up times. Secure clamping reduces rework and downtime Integrated 16 mm T-slot configuration enables flexible clamping with standard fixtures and clamps, allowing modular setups without custom adaptors. A rated maximum load of 20 Kg means the table handles typical small-part machining and inspection duties while maintaining positional integrity. Explaining the term: a T-slot is a standard channel for bolt-head engagement, making fixture changes quick and mechanically secure, which cuts fixture-change time and lowers risk of clamping errors. Compact footprint for easy integration on the bench With a base footprint of 225 x 200 mm and an overall height of 115 mm, the table fits onto crowded benches and machine tables while providing sufficient travel surface. The compact form factor supports flexible placement beside mills, drill presses or measuring rigs without significant reorganisation of the workstation. The result is a practical compromise between stability and space efficiency that benefits small shops and labs where bench real estate is at a premium. Request a specification check from Metav Werkzeuge to confirm mounting, clamping options and to reserve the Vertex VCT-512 for the next production run Technical Data Article number: VCT-512 GTIN: 4061905083198 Manufacturer: Vertex Facts Table size: 310 x 141 mm Base (foot) dimensions: 225 x 200 mm Height: 115 mm Maximum load: 20 Kg Weight: 16.5 kg T-slot width: 16 mm Special features Type: Cross table Suitable for light milling, drilling and inspection fixtures Compact benchtop design FAQ What are the exact table dimensions? The table surface measures 310 x 141 mm, which on the VCT-512 provides a versatile working area for small parts. What is the load capacity for clamping operations? The Vertex VCT-512 is rated for a maximum load of 20 Kg, suitable for typical small-workpiece machining and inspection tasks. Which T-slot size is provided for fixturing? A 16 mm T-slot is fitted to the cross table for standard clamp and fixture compatibility. How much space does the unit occupy on the bench? The base dimensions are 225 x 200 mm with an overall height of 115 mm, allowing easy placement on crowded workbenches. Is the table heavy enough to reduce vibration during cutting? With a weight of 16.5 kg, the cross table offers sufficient mass to dampen minor vibrations for improved finish and measurement stability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
315mm Fork Clamp Bar DIN 6315B Slot 22mm for M20 M22 Screw - AMF
Robust fork‑type construction with a 22 mm slot and 315 mm overall length ensures standard‑compliant interchangeability and reliable clamping for workshop fixtures; pair this with the compatibility for M20 and M22 clamping screws to reduce setup time and avoid mismatches. Order the AMF clamp bar directly via Metav Werkzeuge or consult our specialists for tailored application advice. AMF fork-type clamp bar — DIN 6315B, 22 mm slot, 315 mm The AMF fork-type clamp bar is a DIN‑compliant clamping component intended for secure fixture mounting where M20 and M22 clamping screws are used, ideal for workshop and production jigs. Fork-type clamp bar, DIN 6315B compliant 22 mm slot width for M20/M22 clamping screws 315 mm overall length for deeper clamping reach Designed for fast, repeatable fixture assembly Predictable, standard-compliant performance for less downtime Reliance on the DIN 6315B standard offers predictable interchangeability and simplifies procurement across production lines. Conformance to this specification means that replacement parts and mating components follow defined dimensions and tolerances, which reduces the risk of assembly errors and speeds up maintenance windows. The standard compliance also supports long‑term planning for spare part inventories and minimises unexpected compatibility issues during machine changeovers. Faster set‑up and secure holding with the fork design The fork execution and 22 mm slot width are engineered for compatibility with common clamping screws M20 and M22, enabling immediate engagement and secure axial support. The 315 mm overall length increases reach into deeper fixtures, so fewer intermediate adapters are required; this shortens set‑up times and simplifies toolholding routines. A clear mechanical restraint from the fork shape improves repeatability of clamping forces, translating into consistent part quality and fewer reworks. Practical workshop benefits and applications Made for routine use in jigs, fixtures and retrofit operations, this clamp bar supports efficient workshop workflows by reducing alignment complexity and avoiding bespoke machining for every fixture change. The simple geometry permits quick inspection and replacement, while the compatibility with widely used clamping screw sizes ensures broad applicability across turning, milling and assembly jigs. Delivered as a single unit (packaging unit 1, SKU 4000833031NW), the component is ready for immediate integration into existing clamping systems. Contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com to confirm fitment for your clamping screws and secure reliable supply of the AMF fork-type clamp bar (SKU 4000833031NW) Technical data Article number: 4000833031NW Brand: AMF Product type: Fork‑type clamp bar Packaging unit: 1 Facts Standard: DIN 6315B Slot width: 22 mm Overall length: 315 mm Suitable for: M20, M22 Special features Fork execution Label: Gabelspanneisen DIN 6315B Schlitz-B.22mm L.315mm f.Spannschraube M20,M22 AMF Type: Gabelausführung FAQ Which clamping screw sizes are compatible with this clamp bar? The clamp bar is designed for use with M20 and M22 clamping screws and provides a 22 mm slot to accommodate these thread sizes reliably. Is this component compliant with an established standard? Yes — the component conforms to DIN 6315B, ensuring dimensional compatibility with other standardised clamping elements. What advantages does the fork execution offer in a fixture? The fork‑type design enables positive engagement around the clamping screw and improves axial restraint, resulting in repeatable clamping and quicker assembly compared with non‑fork alternatives. How does the 315 mm length benefit workshop applications? An overall length of 315 mm gives additional reach into deeper fixtures, reducing the need for extenders or special adapters and speeding up set‑up operations. Is the part ready for immediate installation on delivery? The item is supplied as a single unit (packaging unit 1, SKU 4000833031NW) and is intended for direct integration into compatible fixture systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Fork Clamp Bar Slot Width 26mm For M24 Clamping Screw - AMF
A fork-style clamping bar offering secure fork engagement with a 26 mm slot and compatibility with M24 clamping screws, paired with a 315 mm length for extended reach — ideal for stable fixture setups and reduced repositioning. Order the clamp directly via Metav Werkzeuge or consult our advisors for specification support. Fork-style clamping bar No. 6315GN — 26 mm slot, 315 mm length (AMF) A fork-style clamping bar No. 6315GN engineered for machining fixtures and workshop clamping, designed to work with standard M24 clamping screws for dependable part retention in production environments. Fork design for reliable workpiece engagement 26 mm slit width for standard clamping screws 315 mm overall length for deep setups Compatible with M24 clamping screw Precision clamping for consistent machining The fork geometry provides a concentrated contact area that improves repeatability during clamping cycles. By combining a fork-style clamping bar with a defined 26 mm slot and suitability for M24 clamping screws, the element minimises lateral movement and maintains alignment under cutting forces. This leads to fewer micro-adjustments during setup and contributes to consistent part quality across batches. The design is particularly advantageous for fixtures where lateral stability and controlled clamping pressure are decisive for surface finish and dimensional tolerance. Built for workshop endurance and straightforward integration Constructed for integration into existing fixtures and bolting systems, the clamp’s 315 mm length gives additional reach, reducing the need for repositioning and allowing more flexible workpiece placement. Dimensional clearances such as A: 40 mm, B2: 70 mm and B3: 43 mm ensure predictable fitment in standard tooling plates and vice setups, while L2: 83 mm and L3: 56 mm define the engagement geometry for straightforward CAD placement. The uncomplicated form factor simplifies retrofitting and inventory management, making the component a pragmatic choice for production shops seeking reliable, low-complexity clamping solutions. Faster setups and safer handling in daily use Routine handling benefits from the fork profile because the workpiece can be located and clamped with fewer iterative adjustments, contributing to reduced setup time and lower cycle variability. The clear compatibility with M24 screws streamlines spare-part logistics and tooling standardisation, supporting lean workshop organisation and predictable maintenance intervals. For teams aiming to increase throughput without sacrificing safety or repeatability, this clamp provides a pragmatic balance between robust hold and uncomplicated assembly. For secure, standardised clamping with the AMF fork-style clamping bar No. 6315GN, contact Metav Werkzeuge for ordering and technical clarification — info@metav-werkzeuge.com or +49 2822 7131930 — our consultants will assist with specification matching and delivery options Technical Data Article number: 4000603071NW Manufacturer: AMF Product type: Clamping bar (spanneisen) Design: Fork version No. 6315GN Suitable for: M24 clamping screw Dimensions Slot width: 26 mm L1 overall length: 315 mm A: 40 mm B2: 70 mm B3: 43 mm L2: 83 mm L3: 56 mm Packaging unit: 1 Special features Fork execution for focused engagement Label: Gabelspanneisen No.6315GN Schlitz-B.26mm L.315mm f. Spannschraube M24 AMF SKU / UID: 4000603071NW FAQ What clamping screw fits this fork-style clamping bar? The fork-style clamping bar No. 6315GN from AMF is designed for use with an M24 clamping screw, providing standardised compatibility for common fixture systems. Which dimensions determine the installation depth and reach? Key installation dimensions are the overall length L1 = 315 mm and the slot width of 26 mm; additional clearance values are A = 40 mm, B2 = 70 mm and B3 = 43 mm as specified for fixture planning. Is this clamping bar suitable for retrofitting into existing fixtures? Yes, the geometry and standardised M24 interface make the clamp well suited for retrofitting and replacement in conventional machining and workshop fixtures. How is the product identified for ordering or spare parts? Order identification is via SKU 4000603071NW and the designation fork-style clamping bar No. 6315GN (AMF), which should be quoted for exact matching. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Fork Jaw Clamping Wedge Slot 22mm For M20 M22, Fork Design - AMF
Take advantage of a secure fork design and a precise 22 mm slot combined with a practical 315 mm length for reliable fixture clamping; benefit from compatibility with standard M20 and M22 clamping screws. Order the fork clamping wedge directly via Metav Werkzeuge or ask our consultants if needed. Fork clamping wedge No. 6315GN — Fork design, 22 mm slot, 315 mm length (AMF) The Fork clamping wedge No. 6315GN is a fork-style clamping element intended for fixture and vice applications, designed to accept M20 and M22 clamping screws for robust and repeatable workholding. Fork design for secure engagement Slot width 22 mm for standard fittings Length 315 mm for extended reach Compatible with M20 and M22 clamping screws Faster, more repeatable clamping for productive setups The fork-style execution provides a straightforward mechanical engagement that reduces setup time and increases repeatability. A 22 mm slot offers a defined contact area for standard clamping hardware, while the 315 mm length permits deeper reach or offset mounting in modular fixture assemblies. For production environments where cycle time and consistency matter, this clamping element translates directly into fewer re-adjustments and a steadier process flow. Broad compatibility that simplifies integration Designed to accept both M20 and M22 clamping screws, the component fits established clamping standards common in shop fixtures and machine vices. The fork geometry allows secure engagement with mating parts, which results in a stable clamping interface and reduced risk of slippage under load. Specifying this clamping wedge streamlines parts procurement and reduces the need for custom adapters in many typical workshop configurations. Practical handling and durability for everyday use The long form factor supports a variety of fixture arrangements while maintaining a compact footprint when mounted. The slotted engagement ensures quick placement and removal during changeovers, contributing to lower downtime. Although material specifics are not listed, the design focus is on mechanical reliability and workshop compatibility, making it suitable for repetitive industrial tasks where steadfast clamping is required. For procurement or tailored advice on integrating the AMF fork clamping wedge No. 6315GN into existing fixtures, contact Metav Werkzeuge for expert guidance and ordering assistance. Technical data Article number: 4000603070NW Type: Fork design No. 6315GN Product type: Clamping wedge Manufacturer: AMF Packaging unit: 1 Facts Slot width (B): 22 mm Length (L1): 315 mm Suitable for screws: M20, M22 Additional dimensions: A: 40; B2: 60; B3: 35; L2: 68; L3: 45 Design features Fork execution Slotted engagement For clamping screws M20 and M22 SKU/UID: 4000603070NW FAQ Which clamping screws are compatible with this fork clamp? The fork clamping wedge No. 6315GN from AMF is specified for use with M20 and M22 clamping screws, allowing integration with commonly used sizes in fixtures and machine vices. How does the fork design affect fixture stability? The fork execution provides a positive mechanical engagement that concentrates contact on the 22 mm slot, improving lateral stability and reducing the tendency for the clamped part to shift during machining. Is the clamping wedge suitable for deeper or offset mounting? Yes — the 315 mm length gives extended reach, which is advantageous for offset or deeper mounting arrangements within modular fixture systems. What dimensions should be checked before selection? Key dimensions are the 22 mm slot width and the 315 mm length; additional measures provided (A, B2, B3, L2, L3) help verify fit within the intended fixture geometry. Can the component be swapped quickly during tool changes? The slotted, fork-style interface is designed for straightforward placement and removal, enabling relatively fast changeovers and reducing downtime in repetitive operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Fork Style Clamping Iron Slot B.26mm For Clamping Screw M24 DIN 6315B - AMF
Take advantage of standardised compatibility and reliable clamping force: the combination of DIN 6315B conformity, a 26 mm slot and M24 screw compatibility ensures consistent seating and simple integration into existing fixtures. Order the fork-style clamping bar directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Fork-style clamping bar DIN 6315B — 26 mm slot, 315 mm length (AMF) The Fork-style clamping bar delivers a standard-compliant clamping interface for vices and fixture systems, designed for secure use with M24 clamping screws. Fork design to fit M24 clamping screws DIN 6315B standardised interface 26 mm slot width for stable seating 315 mm overall length for versatile reach Reliable clamping through a standard interface The DIN 6315B conformity of this fork-style clamping element guarantees a predictable interface for fixtures and modular setups, reducing alignment guesswork during production planning. A 26 mm slot accurately locates the mating screw or pin and promotes repeatable contact conditions, which directly improves clamping accuracy and operational consistency. This standardised approach shortens set-up times in serial applications and facilitates interchangeability across clamping systems without additional adaptors. Fork design for secure force transfer and stability The fork configuration channels clamping loads into a defined contact zone, ensuring stable force transfer and limiting lateral movement during machining or assembly operations. With a 315 mm overall length, the component offers extended reach for deeper clamping positions while maintaining rigidity across its span. The geometry helps to distribute stress evenly, which preserves seat integrity and supports sustained performance in demanding workshop environments. Straightforward integration with M24 systems Designed specifically for use with M24 clamping screws, this clamping element fits seamlessly into established clamping architectures, avoiding the need for custom hardware. Compatibility with common screw sizes and the standard interface speeds procurement decisions and simplifies inventory management. The product’s straightforward mounting characteristics enable faster fixture changes and a leaner tooling footprint on the shopfloor, contributing to measurable workflow improvements. Practical benefits for workshop and production use Beyond basic compatibility, the fork-style clamp reduces handling complexity: the defined slot and standardised dimensions lower the risk of incorrect seating and support reliable repeatability from one operation to the next. Built for routine industrial use, the component supports consistent cycle times and helps maintain quality standards in both repair and production settings. The clear specification and industrial focus make it a practical choice where dependable clamping and straightforward maintenance are required. For purchasing advice, technical clarification or to specify the correct variant, contact Metav Werkzeuge in Emmerich for reliable delivery and expert assistance: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number / SKU: 4000833034NW Manufacturer: AMF Product type: Spanneisen Standard: DIN 6315B Facts Slot width: 26 mm Overall length: 315 mm Compatible screw: M24 Packaging unit: 1 Special features Fork-style execution (Gabelausführung) Designed for clamping screw M24 Axite enrichment: A: 40; B2: 66; B3: 20; B4: 10 Label: Gabelspanneisen DIN 6315B Schlitz-B.26mm L.315mm f.Spannschraube M24 AMF FAQ What is the slot width of the fork-style clamping bar? The fork-style clamping bar features a 26 mm slot, which locates the clamping screw or locating pin for repeatable seating. Which clamping screw size is required for this component? This clamping element is designed for use with M24 clamping screws to match the DIN 6315B interface. What standard does this clamping bar conform to? The component conforms to DIN 6315B, ensuring compatibility with standardised fixture and clamping systems. What is the overall length and how does it affect use? The overall length is 315 mm, offering extended reach for deeper clamp positions while maintaining rigidity for stable operation. Can this part be used across different fixtures and vices? Yes — the DIN 6315B interface and M24 compatibility enable straightforward integration into a range of vices and modular fixture systems; the SKU for reference is 4000833034NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Rotary Index Table Simple, 105mm Centre Height, 3-Jaw Chuck Set Included - Vertex
Take advantage of the combination of precise indexing, a compact 315 mm working diameter and the included 3-jaw chuck for efficient setup and repeatable machining results. Order the CC-12A round dividing table directly via Metav Werkzeuge or ask our consultants for tailored application advice. CC-12A round dividing table — 315 mm diameter, 3-jaw chuck included The CC-12A round dividing table provides compact rotary indexing for precision machining and workshop fixturing in small to medium production runs. 315 mm working diameter Robust construction for workshop use Includes 3-jaw chuck and dividing plates Heavy-duty 163 kg base Accurate indexing that reduces setup time A compact rotary table streamlines repetitive machining tasks by offering reliable precision for indexing operations. The integrated indexing system works with standard dividing plates to deliver repeatable angular positions, which reduces the number of individual setups and the risk of alignment errors. With a 315 mm working diameter, the unit accommodates a wide range of workpieces while keeping the footprint small, so production flow becomes more efficient without sacrificing control. Built to stay steady under load A substantial mass contributes to vibration damping and stability during cutting and finishing, improving surface quality and tool life. The table’s solid build and 163 kg mass provide a steady platform for clamping and machining operations, while the compact overall dimensions 432 x 293 x 388 mm make integration into existing benches or milling fixtures straightforward. The result is fewer reworks and a more predictable machining process for standard workshop applications. Accessories included to simplify operation Delivered as a complete set, the table includes a 3-jaw chuck and a series of dividing plates (2, 3, 4, 6, 8, 12) that expand the range of available indexing ratios without additional purchases. These accessories enable quick vice-less clamping of round and irregular parts and allow common divisional patterns to be produced directly at the table. The ready-to-fit configuration shortens commissioning time and keeps the focus on producing accurate parts rather than sourcing adaptors. Contact Metav Werkzeuge today to discuss the CC-12A and how its precision indexing and included chuck can be specified for specific applications — email info@metav-werkzeuge.com for technical matching and delivery from Emmerich. Technical data Article number: CC-12A GTIN: 4061905088902 Manufacturer: Vertex Facts Weight: 163 kg Working diameter: 315 mm Mounting/adaptor size: 105 mm External dimensions: 432 x 293 x 388 mm Special features Includes 1x 3-jaw chuck Dividing plates: 2, 3, 4, 6, 8, 12 Delivered as a set FAQ What is the effective working diameter of the rotary table? The effective working diameter is 315 mm, which suits a wide range of workshop parts for the CC-12A round dividing table from Vertex. Which accessories are supplied with the table? The delivery includes one 3-jaw chuck and dividing plates for 2, 3, 4, 6, 8 and 12 divisions to simplify clamping and indexing tasks. Is the table suitable for continuous production use? With a heavy-duty 163 kg construction and compact external dimensions, the CC-12A is designed for stable, repeatable operation in regular workshop and small-series production. What does the 105 mm mounting specification refer to? The 105 mm value indicates the mounting/adaptor interface dimension used for fitting chucks and tooling to the CC-12A. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
315mm Rotary Indexing Table Simple With 105mm Spindle Mount, 3-Jaw Chuck Set Included - Vertex
Robust 315 mm rotary table with a 105 mm mounting bore and included 3-jaw chuck delivers stable indexing and reliable repeatability; ideal where heavy construction and precise positioning are required. Order the CC-12 directly via Metav Werkzeuge or consult our specialists for application advice. CC-12 Rotary Table – 315 mm diameter, 3-jaw chuck (Vertex) A CC-12 simple rotary table for precision workpiece indexing and secure clamping on milling machines and workshop spindles. 315 mm working diameter 105 mm mounting bore Supplied with 3-jaw chuck Heavy-duty 163 kg construction Stable platform for accurate indexing and reduced vibration The heavy cast design provides a stable platform that reduces vibration during cutting, improving surface finish and tool life. With a working diameter of 315 mm and a 105 mm mounting bore the table offers generous contact area for a wide range of components; the mass of 163 kg increases rigidity and contributes directly to consistent, repeatable results. This low-vibration behaviour benefits both conventional and CNC-assisted milling operations by allowing higher feed stability and more predictable machining outcomes. Integrated workholding for faster setup and flexible clamping Supplied as a compact set, the table includes a 3-jaw chuck and a selection of cover plates (2, 3, 4, 6, 8, 12), enabling rapid clamping of round and irregular workpieces. The included accessories reduce the need for additional fixtures and cut setup time between jobs. For operators less familiar with specialised fixtures, the combination of chuck and backplates simplifies part mounting: concentric clamping from the chuck pairs with the cover plates for stepped or profiled components, yielding secure hold and improved concentricity without complex bespoke tooling. Simple design that supports workshop productivity and precision A straightforward, single-stage rotary table architecture keeps maintenance predictable and spares management simple. The uncomplicated mechanism facilitates routine checks and prolongs service intervals, which is particularly valuable in small-batch production where uptime is critical. Built for durability rather than superfluous functions, the unit prioritises precision and repeatability, translating to fewer reworks and steadier output quality over the life of the equipment. Practical choice for suppliers and long-term operation Choosing this Vertex rotary table means selecting a proven manufacturer and a component that integrates readily into standard machine-tool environments. The compact footprint (432 x 293 x 388 mm) and the supplied workholding make the unit practical for constrained benches while still delivering industrial-grade stability. Metav Werkzeuge positions such products for workshops that require accessible, high-accuracy solutions without compromising on build quality—a pragmatic balance between investment and dependable performance. Contact Metav Werkzeuge for targeted application support and to reserve the CC-12 rotary table from our European stock in Emmerich Technical data SKU: CC-12 GTIN: 4061905089374 ECLASS: 36600610 Facts Diameter: 315 mm Mounting bore: 105 mm Weight: 163 kg Dimensions: 432 x 293 x 388 mm Special features Simple rotary table design Includes 3-jaw chuck; cover plates 2,3,4,6,8,12 Manufacturer: Vertex FAQ What workholding is included with the rotary table? The CC-12 rotary table is supplied with a 3-jaw chuck and cover plates for 2, 3, 4, 6, 8 and 12 positions, providing versatile clamping options. Which machines is this table compatible with? The CC-12 is designed for integration with milling machines and workshop spindles that accept a 105 mm mounting bore and similar mounting interfaces. How does the table improve machining accuracy? The heavy construction and 315 mm working diameter of the CC-12 increase rigidity and reduce vibration, improving concentricity and repeatability during cutting operations. Is the CC-12 suitable for serial production or small batches? The simple, robust design of the CC-12 makes it well suited to small-batch production where quick setups and consistent precision are required. Who manufactures the product and where is it sourced? The rotary table is manufactured by Vertex and supplied via Metav Werkzeuge, which stocks precision tools for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
315mm Stud Bolt DIN 6379 Quenched and Tempered Grade 8.8, M16 - AMF
Combine robust DIN 6379 conformity with a M16 thread and a 315 mm overall length to ensure dependable clamping in deep assemblies; the stud bolt’s quenched and tempered finish to property class 8.8 adds fatigue resistance for industrial use. Order the component directly via Metav Werkzeuge or contact our consultants for application advice. Stiftschraube DIN6379 M16x315mm – Stud bolt, property class 8.8 by AMF Stiftschraube DIN6379 M16x315mm – a high-strength stud bolt designed for secure fastening in workshop and industrial assemblies, compliant with DIN 6379 High tensile strength property class 8.8 DIN 6379 standardised geometry M16 thread for reliable fastening 315 mm overall length for deep assemblies Dependable strength for critical fastenings The stud bolt delivers a clear technical advantage through its property class 8.8 heat treatment and quenched and tempered condition, which together provide a high tensile strength and improved fatigue performance. Compliance with DIN 6379 ensures the fastener’s geometry is standardised, enabling predictable torque behaviour and consistent clamping force in series production. Such mechanical reliability reduces rework and supports uninterrupted assembly lines while maintaining safe load-bearing characteristics. Consistent dimensions that simplify installation Measured dimensions—M16 thread and an overall length of 315 mm, with a width of 19 mm—allow planners and fitters to design fixtures and blind-hole assemblies with confidence. The clear specification of thread size and length supports accurate component selection for through-bolting or stud-mounted fittings, reducing measuring effort on the shop floor. Precise sizing also helps match nuts, washers and threaded holes without trial fits, improving assembly throughput and reducing downtime. Robust finish and practical workshop use The fastener’s quenched and tempered finish to 8.8 provides a balance between strength and ductility, making it suitable for many standard industrial applications where reliable clamping is required. As a factory-standard fastening, this stud bolt by AMF fits routine maintenance and production tasks, offering longevity under cyclic loads. For procurement and supply chain assurance, relying on standardised parts simplifies stocking and avoids bespoke lead times. Contact Metav Werkzeuge for tailored application advice and to secure the AMF stud bolt 4000603361NW for dependable fastening solutions Technical data Article number: 4000603361NW Description: Stiftschraube DIN6379 M16x315mm, quenched to 8.8, AMF Manufacturer: AMF Product type: Stud bolt Packaging unit: 1 Facts Thread: M16 Overall length: 315 mm Width: 19 mm UID: 4000603361NW Additional dimension b: 180 mm Special features Quenched and tempered to property class 8.8 Complies with DIN 6379 FAQ What material condition does this stud bolt have? The AMF stud bolt is quenched and tempered to property class 8.8, giving it enhanced tensile and fatigue characteristics suited to industrial fastening. Which standard governs the geometry of this fastener? Geometry and dimensional tolerances follow DIN 6379, ensuring interchangeability and predictable performance in assemblies. What thread and length are specified for this item? This fastener features an M16 thread with an overall length of 315 mm, indicated on the article 4000603361NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Stud Bolt M20 Hardened 8.8, DIN 6379 - AMF
Reliable fixings for demanding assemblies: the combination of DIN 6379 compliance, M20 thread geometry and 315 mm overall length delivers consistent, high‑load connections; benefit from quenched and tempered steel in property class 8.8 and order the stud bolt directly via Metav Werkzeuge or consult our advisors. AMF stud bolt DIN 6379 — M20 x 315 mm, property class 8.8 The stud bolt DIN 6379 M20 x 315 mm is a precision fastener designed for secure, repeatable mechanical connections in industrial and workshop assemblies. DIN 6379 standardised thread geometry M20 thread for robust connections 315 mm overall length for deep assemblies Quenched and tempered, property class 8.8 Consistent fit and repeatable installation for production use Compliance with DIN 6379 ensures a predictable thread form and tight tolerances, which translates into consistent fit across batches. This reliability reduces assembly time and minimises the need for rework in repetitive production environments. The M20 thread dimension combined with the 315 mm length supports applications where extended engagement is required, such as coupling flanged components or securing long‑reach fittings. Specified tolerance adherence means fewer rejects and a smoother production flow. Strength and material treatment that cut maintenance intervals The component is quenched and tempered to property class 8.8, which indicates a high‑tensile performance level suitable for most structural and mechanical joints. In practice, this heat treatment raises yield and tensile strengths compared with untreated steel, so assemblies retain clamp force longer under cyclical loads. For engineers and maintenance planners, this equates to longer service intervals and lower lifecycle expenditure through reduced fastener replacement and downtime. Easy integration into existing assemblies and tooling Designed as a standard threaded stud, the threaded stud integrates with widely available nuts and washers without bespoke tooling. The nominal wrench dimension of 27 mm supports straightforward installation with common spanners or sockets, while the standardised thread profile promotes compatibility with existing mating parts. Clear specification allows planners to validate designs quickly and procurement to order with confidence, streamlining purchasing and saving specification time. For applications that prioritise standard compliance and tensile strength, contact Metav Werkzeuge to discuss the AMF stud bolt SKU 4000833287NW and obtain tailored fastener recommendations. Technical data Article number: 4000833287NW UID: 4000833287NW Brand: AMF Product type: stud bolt Dimensions & thread Thread: M20 Overall length: 315 mm Nominal width (wrench): 27 mm Addition: b = 200 Materials & features Standard: DIN 6379 Heat treatment: quenched and tempered to property class 8.8 Packaging unit: 1 FAQ What standard does this stud bolt conform to? The stud bolt conforms to DIN 6379, ensuring standardised thread geometry and predictable tolerances for industrial use. What are the key dimensions and how are they specified? The fastener is specified with an M20 thread and an overall length of 315 mm (SKU 4000833287NW), making it suitable for assemblies requiring extended engagement. What does property class 8.8 mean for performance? Property class 8.8 indicates the stud bolt has been quenched and tempered to provide elevated tensile and yield strength compared with untreated steel, suitable for demanding mechanical joints. Is the stud bolt compatible with standard nuts and washers? Yes, the thread is a standard M20 form per DIN 6379, which pairs with commercially available nuts and washers designed for that thread size. Who manufactures this stud bolt? This stud bolt is supplied under the AMF brand; for procurement and technical enquiries reference SKU 4000833287NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Stud Bolt M24 Heat Treated 8.8, DIN 6379 - AMF
Benefit from a combination of standard compliance, dependable tensile performance and precise metric threading for secure, long-lasting assemblies; order directly via Metav Werkzeuge or consult the advisors for specification support. Stiftschraube DIN6379 M24x315mm — Stud bolt, heat-treated to property class 8.8 (AMF) Stiftschraube DIN6379 M24x315mm is a metric stud bolt designed for reliable threaded connections in machinery and structural applications. Stud bolt DIN 6379, metric thread M24 Length 315 mm for deep threaded assemblies Heat-treated to property class 8.8 High-strength fastening for secure joints The stud bolt is specified to DIN 6379, providing dimensional compatibility with standard metric counterparts. Heat treatment to property class 8.8 gives the part elevated strength and improved fatigue resistance compared with untreated fasteners, which translates into safer clamping forces and longer service life in cyclical or load-bearing applications. The metric M24 thread and full 315 mm length ensure suitability for deep-engagement connections where full thread engagement and high clamping loads are required. Clear specification reduces installation risk With a defined thread size and standard compliance, the component simplifies procurement and assembly planning: an M24 thread fits matched nuts and tapped holes to common metric tolerances, and the declared overall length of 315 mm plus a threaded section of 200 mm helps determine required engagement and torque ranges. This clarity reduces the risk of incorrect part selection and minimises downtime from rework. The robust geometry supports consistent torque transfer and predictable joint behaviour in production environments. Practical benefits on the shop floor Choosing a standardised, heat-treated stud bolt means fewer surprises during assembly: improved clamping retention reduces the need for frequent retightening and supports maintenance intervals. The combination of standard conformity (DIN 6379) and a proven strength class makes the part particularly suited to mechanical assemblies, flanged connections and situations where vibration or alternating loads are present. Explanations of technical terms are straightforward: property class 8.8 denotes a quenched and tempered product with elevated tensile capability compared with basic grades, and DIN standards ensure interchangeability. Specification support and supply reliability Procurement and engineering teams benefit from transparent data and dependable supply. Metav’s distribution from Emmerich acts as a quality filter for the European market, pairing a wide product range with technical advice and reliable fulfilment. For projects where component traceability and consistent mechanical behaviour matter, the documented standard and material treatment reduce acceptance time and support conformity checks during inspection. For reliable high-strength fastenings, contact Metav Werkzeuge to discuss AMF stud bolts (SKU 4000833299NW) and arrange supply or technical clarification — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833299NW Product type: Stud bolt (Stiftschraube) Standard: DIN 6379 Dimensions & core data Overall length: 315 mm Thread: M24 Thread length (b): 200 mm Width (across flats / reference): 35 mm Materials & special features Heat-treated to property class 8.8 Packaging unit: 1 Label: Stiftschraube M24x315mm, tempered to 8.8, AMF FAQ What standard does this stud bolt conform to? The stud bolt conforms to DIN 6379, ensuring dimensional compatibility with metric mating parts and standard thread profiles. What does property class 8.8 mean for performance? Property class 8.8 indicates a heat-treated fastener with elevated tensile strength and improved fatigue resistance compared with non-heat-treated grades, making the stud bolt suitable for load-bearing assemblies. Is the thread specification compatible with common M24 nuts? Yes — the M24 thread is a standard metric size and will fit nuts and tapped holes manufactured to the corresponding metric tolerances. How long is the threaded section and why is that relevant? The threaded section is 200 mm (thread length b), which informs engagement calculations and helps determine required clamping length for secure joints. Can this stud bolt be used in vibrating environments? Due to its heat treatment and strength class, the stud bolt is well suited to applications with dynamic loads or vibration, where reliable clamping and fatigue resistance are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Three-Jaw Self-Centring Reversible Chuck, Height 156.5mm, 3xM16 - Vertex
High clamping accuracy from the self-centring mechanism, a reversible 3-jaw layout and a robust 41 kg construction provide secure, repeatable workholding for demanding turning tasks. Benefit from reduced setup times and consistent machining results — order the VSK-12A chuck directly via Metav Werkzeuge or consult the advisors for application guidance. VSK-12A – 3-jaw reversible, self-centring lathe chuck (Ø 315 mm) by Vertex The VSK-12A is a reversible, self-centring 3-jaw chuck designed for reliable clamping on lathes and machining centres where fast, repeatable workholding is required. Reversible 3-jaw design for internal/external clamping Self-centring action for repeatable concentricity Heavy-duty construction, 41 kg for stable machining Mounting interface with 3xM16 thread Faster set-ups and consistent machining quality The combination of a self-centring mechanism and a 3-jaw chuck geometry delivers fast alignment of round and hexagonal stock, reducing the time spent on manual adjustments. For production runs this means fewer interruptions and more consistent part tolerances; the reversible jaw arrangement also allows quick switching between external gripping and internal gripping without changing chucks. The result is measurable process efficiency and improved shop-floor throughput, especially where repeated batches and turnover are frequent. The robust design contributes to stable cuts, minimising vibration and improving surface finish. Flexible clamping options and clear mounting data A reversible configuration permits both internal and external workpiece gripping, increasing the range of components that can be processed with a single workholding device. Mechanical mounting is provided via a 3xM16 thread pattern; the chuck presents a diameter of Ø 315 mm and a height of 156.5 mm, making it suitable for installations that accept this interface. The substantial mass of 41 kg helps the chuck resist deflection under load, improving repeatability during heavy-duty turning. For integration, note the mounting thread and overall envelope to ensure compatibility with the lathe spindle and any adapting plates. Practical handling, inspection and application notes Due to its weight and construction, safe handling procedures should be observed when fitting the chuck to the spindle; lifting aids or team lifting are advisable. The reversible jaw system simplifies changeover between gripping modes, but correct jaw seating and secure bolting via the spindle interface are essential for safe operation and concentric clamping. The VSK-12A supports production environments where short set-up times, robust clamping and reliable repeatability are priorities; when matched with appropriate tooling and process parameters, the chuck contributes to predictable cycle times and reduced scrap rates. Contact Metav Werkzeuge for tailored clamping advice and rapid supply from our Emmerich location — specify the VSK-12A (SKU VSK-12A) for precise technical checks and ordering support Technical data Article number: VSK-12A SKU: VSK-12A GTIN: 4061905090585 Manufacturer: Vertex Facts Diameter: 315 mm Height: 156.5 mm Weight: 41 kg Mounting thread: 3xM16 eClass: 21020590 Special features 3 jaws Self-centring Reversible (internal/external clamping) Heavy-duty construction FAQ What is the primary application of this chuck? The VSK-12A 3-jaw, reversible, self-centring chuck by Vertex is intended for general lathe work and machining-centre turning where rapid alignment and repeatable clamping are required. How does the reversible, self-centring 3-jaw system function? The three jaws move simultaneously when actuated, centring the workpiece automatically; reversing the jaw orientation allows switching between gripping the exterior or the interior of a component without additional fixtures. What are the essential dimensions and mounting details to check before purchase? Key values are Ø 315 mm diameter, 156.5 mm height, and a mounting thread of 3xM16; the weight is 41 kg. Confirm these dimensions against the machine spindle and any adapter requirements. Is this chuck suitable for heavy-duty turning operations? The robust 41 kg construction and three-point clamping provide stable workholding for demanding turning tasks; suitability for specific cutting speeds and feeds should be evaluated against the machine and process conditions. What precautions are recommended for safe installation and handling? Due to the mass of the chuck, use appropriate lifting equipment or a team lift for mounting. Ensure correct engagement with the spindle thread and that fastening torque follows the machine manufacturer's guidance for safe operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
315mm Three-Point Self-Centring Extra-Flat 3-Jaw Lathe Chuck, 3150 kgf Clamping Force - Vertex
A self-centring, extra-flat three-jaw lathe chuck delivers secure, low-profile clamping for medium-sized turning operations; the combination of self-centring accuracy and a clamping force of 3150 kgf supports stable, repeatable machining. Benefit from a compact Ø315 mm design that reduces overhang and improves accessibility on the workpiece — order the 3-jaw lathe chuck directly via Metav Werkzeuge or ask our consultants if needed. 3-jaw lathe chuck VNBK-10 — self-centring, extra-flat, Ø315 mm (Vertex) The 3-jaw lathe chuck VNBK-10 is a self-centring, extra-flat clamping solution designed for turning and facing tasks on medium-sized lathes, offering a compact profile for improved tool access and stable workholding. Self-centring, extra-flat design Diameter 315 mm for medium workpieces Clamping force 3150 kgf for secure hold Robust construction, approx. 30.5 kg Faster set-up through precise centring The self-centring mechanism ensures rapid and consistent alignment of round and hexagonal components, which reduces adjustment time during batch production. Improved concentricity minimises run-out and supports repeatable tolerances, making the chuck well suited to tasks where reliable positional accuracy is essential. The result is fewer manual interventions during loading and shorter overall cycle times, supporting efficient throughput on the shop floor. Secure clamping for heavier cuts and steady machining A rated clamping force of 3150 kgf provides a high holding capacity that helps resist pull-out under cutting loads, allowing more aggressive feed rates and stable material removal. Combined with the low-profile mounting, vibration is reduced during heavy-facing or roughing passes, which leads to improved surface finishes and extended tool life. This performance characteristic directly contributes to predictable process outcomes and reduced scrap rates. Compact design that improves accessibility and tool clearance The extra-flat profile reduces spindle overhang and brings the workpiece closer to the machine centre, enhancing rigidity and enabling shorter tooling setups. Closer proximity to the spindle bore simplifies tool paths and offers improved access for turning and facing operations on medium-sized components up to Ø315 mm. The compact form factor also aids in operations where space around the chuck is constrained, supporting ergonomic handling and more flexible fixturing. Durable build for continuous production use Weighing around 30.5 kg, the chuck’s mass reflects a robust construction that resists deformation under load and maintains clamping consistency over repeated cycles. Manufactured by Vertex, the product is intended for workshop environments where long-term reliability and predictable performance are required. Routine inspection of jaws and drive components will preserve clamping integrity and contribute to safe, uninterrupted production. For tailored technical guidance or availability of Vertex clamping solutions, contact Metav Werkzeuge in Emmerich — our specialists provide consultancy on chuck configuration, compatibility and delivery options via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: VNBK-10 GTIN: 4061905085666 Manufacturer: Vertex ECLASS: 21020401 Facts Diameter: 315 mm Clamping force: 3150 kgf Weight: 30.5 kg Special features Self-centring design Extra-flat profile SKU: VNBK-10 Category: Vertex FAQ How does the self-centring feature affect setup time? The self-centring mechanism of the 3-jaw lathe chuck VNBK-10 reduces manual alignment, shortening setup times and improving repeatability for series production. What maximum workpiece diameter is supported? Workpieces up to Ø315 mm can be clamped directly in this extra-flat chuck, making it suitable for medium-sized turning operations. What holding power does the chuck provide? The chuck offers a clamping force of 3150 kgf, providing secure retention for higher cutting forces and steady machining. Is the chuck suitable for heavy-duty turning? The combination of robust construction and a high clamping force supports heavier cuts and helps maintain stability during demanding turning tasks. Which manufacturer produces this chuck and what is the SKU? This chuck is produced by Vertex and is listed under SKU VNBK-10; the manufacturer details are provided below. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
316mm Clamp Ring For Soft Jaws, For 12" Chuck - Vertex
Reliable clamping for turning operations: the VFR-12 combines a 316 mm diameter with compatibility for soft jaw inserts and a compact 5 kg mass to provide stable, repeatable workholding. Order the VFR-12 directly via Metav Werkzeuge or ask our consultants if needed. VFR-12 Clamping Ring – 316 mm diameter, for soft jaw inserts (Vertex) The VFR-12 is a clamping ring designed for use with soft jaw inserts on 12-inch chucks, intended to secure workpieces reliably in lathe and turning applications. 316 mm diameter for large workpieces Compatible with 12-inch soft jaw inserts Solid construction, approx 5 kg weight Ensures repeatable, secure workholding Precise compatibility that reduces set-up uncertainty The clamping component is engineered to mate precisely with soft jaw inserts, ensuring defined seating and alignment on the chuck. With a 316 mm diameter the ring accommodates larger workpieces while keeping clamping forces centralised; this leads to fewer adjustments during set-up and a lower risk of runout. The described geometry and interface are suitable for typical turning operations where repeatability and positional accuracy are required, and the design purpose is to provide consistent contact for insertion and removal of soft jaws. Stable mass and form for reliable machining results A 5 kg mass contributes to mechanical stability without adding unnecessary bulk, so vibration is reduced and holding power remains consistent across cycles. The result is secure workholding that supports steady feeds and surface finishes during machining. Because the component is intended for integration with standard 12-inch jaw systems, changeovers are predictable and can be incorporated into existing workflows with minimal modification. The combination of mass, diameter and mating interface helps maintain concentricity and reduces the need for repeated corrections. Practical use and procurement guidance for machine shops The ring is suited to workshops that require efficient clamping for medium to large turning tasks and want a straightforward solution for soft jaw workflows. Manufactured by Vertex, the component is intended as a robust, purpose-built accessory for established chuck systems; traceability is supported by the SKU and GTIN for inventory control. For users assessing fitment, check chuck jaw type and mounting specifications to confirm compatibility. Technical queries regarding integration or dimensional verification can be addressed by Metav Werkzeuge’s advisors prior to purchase. Procure the Vertex VFR-12 through Metav Werkzeuge for assured compatibility with 12-inch soft jaw systems and professional procurement guidance from our European distribution centre. Technical data SKU: VFR-12 GTIN: 4061905095535 Manufacturer: Vertex Article name: Clamping ring (Spannring) ECLASS: 20069202 Facts Diameter: 316 mm Weight: 5 kg Special features For soft jaw inserts Compatible with 12-inch chuck jaws Thumbnail image available Category: Vertex FAQ Is the ring compatible with 12-inch chucks? Yes. The VFR-12 is designed for use with 12-inch chuck jaws and is compatible with corresponding soft jaw inserts. What is the nominal diameter of the clamping ring? The clamping ring has a nominal diameter of 316 mm, suitable for larger turning tasks. How much does the component weigh? The component has a weight of approximately 5 kg, contributing to stable clamping during machining. Who manufactures the clamping ring and what is the SKU? The ring is manufactured by Vertex and sold under the SKU VFR-12 (GTIN 4061905095535). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
31mm Flange According to DIN 6331 With M16x2 Thread, 24mm Height - Vertex
Combine the DIN 6331 standard, a secure M16×2 thread and a compact 31 mm diameter to ensure reliable mounting and quick integration into assemblies. Order directly via Metav Werkzeuge or consult our specialists for precise application advice. Flange CFN1624 – Precision flange to DIN 6331 with M16×2 thread (Vertex) A Flange CFN1624 manufactured to DIN 6331 for secure fixture mounting and compact machine interfacing. Precision flange to DIN 6331 Thread M16×2 for secure mounting Compact 31 mm diameter design Lightweight 0.06 kg for easy handling Consistent alignment and secure mounting for fixtures The CFN1624 acts as a compact, standardised interface that supports repeatable alignment in tooling and fixture assemblies. Manufactured to DIN 6331, the component delivers a reproducible datum and thread engagement, which reduces setup variations and rework. The M16×2 thread provides a robust mechanical connection for medium-duty clamping elements, while the standard conformity simplifies sourcing and interchangeability across suppliers and machine types. Compact form that reduces assembly effort and rotating mass With a nominal diameter of 31 mm and a height of 24 mm, the component is designed for tight installations where space is limited. The low mass of 0.06 kg decreases handling effort during assembly and reduces inertial loads where the flange is used on moving subassemblies. These characteristics support faster assembly cycles and can contribute to smoother machine dynamics when integrated into spindles or rotary fixtures. Practical sourcing and industrial readiness Supplied under SKU CFN1624 by Vertex, the product is identified by GTIN 4061905087226 for clear inventory control and traceability. The combination of standard compliance and compact geometry makes the part suitable for use in fixture plates, clamping towers and bespoke tooling where a standardised flange interface is required. For any technical uncertainties about fit or application, Metav provides consultancy to verify compatibility with existing tooling and to support procurement decisions. For precision mounting solutions relying on the Vertex CFN1624, contact Metav Werkzeuge to arrange supply or technical matching and benefit from expert advice and reliable delivery from our Emmerich hub. Technical data Article number: CFN1624 GTIN: 4061905087226 Manufacturer: Vertex Facts Diameter: 31 mm Height: 24 mm Weight: 0.06 kg Thread: M16×2 mm Special features Conforms to DIN 6331 Designed for secure fixture mounting Compact, lightweight geometry Vertex product for industrial use FAQ What standard does this flange follow? The Vertex CFN1624 flange is manufactured to DIN 6331, ensuring standardised dimensions and interchangeability for tooling applications. What are the key dimensions and how do they affect installation? The CFN1624 has a 31 mm diameter and 24 mm height; these compact dimensions allow tight installation and help reduce rotating mass in dynamic assemblies. Which thread specification is provided for mounting? Mounting is via an M16×2 metric thread, offering secure engagement suitable for typical clamping and fixture connections using standard M16 fasteners. Is the weight relevant for moving assemblies? At 0.06 kg, the flange is lightweight, which reduces handling effort and contributes to lower inertial loads when used on rotating or moving subassemblies. How is the part identified for procurement and inventory? The flange is listed under SKU CFN1624 by Vertex and carries GTIN 4061905087226 for unambiguous ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
32-62mm Closure Clamp Horizontal Base With Hook, 1.5kN Thrust, 2kN Holding, Blackened - Kukamet
Take advantage of a robust, compact solution that combines adjustable clamping range, a blackened corrosion-resistant finish and reliable holding force for repeatable fixturing. Order the 311 toggle latch clamp directly via Metav Werkzeuge or ask our consultants if guidance is needed. 311 Toggle Latch Clamp — Kukamet (horizontal foot, with hook) The 311 toggle latch clamp is a compact horizontal-base locking clamp designed for adjustable fixtures and jigs, offering a reliable clamping connection with fast engagement using the integrated hook. Horizontal foot for stable mounting Adjustable arm 32–62 mm Holding force up to 2,000 N Clamping force 1,500 N Predictable clamping performance for production use The 311 delivers consistent clamping force thanks to its toggle mechanism and defined force ratios. A maximum clamping force of 1,500 N combined with a holding force of up to 2,000 N ensures workpieces remain secure during assembly or machining operations, reducing scrap and rework. This technical reliability supports shorter cycle times and a predictable process window in repeat production environments, where measurable force values matter for quality control and fixture design. Flexible fixturing with an adjustable arm and secure engagement An adjustable arm (32–62 mm) and a thread length of 45 mm allow fine setting of the engagement depth and clamping travel, enabling the clamp to accommodate a range of panel or component thicknesses. The horizontal foot mounting provides a low-profile attachment point that simplifies layout on fixture plates, while the integrated hook enables quick engagement and release for frequent operations. At approximately 0.175 kg, the unit is lightweight enough for compact jig assemblies yet robust for industrial handling. Durable surface and straightforward integration into workshops The component is finished in a blackened finish, providing a protective layer that reduces corrosion risk in standard workshop atmospheres and makes the clamp suitable for long-term fixture use. The compact design minimises obstruction around the clamping area, supporting ergonomic access and safe operation. The clamp’s construction supports repeatable positioning and low maintenance; simple periodic inspection of mechanical wear is sufficient to preserve function without complex servicing. Specification-led selection and procurement advice Supplied as SKU B311-2 and identifiable by GTIN for ordering and inventory control, the latch clamp integrates into industry classification systems for straightforward parts management. The combination of measurable force ratings, adjustable travel and a horizontal mounting arrangement makes this clamp appropriate for assembly lines, test jigs and maintenance fixtures where a reliable mechanical lock is required. For project-specific advice on fixture layout or compatibility with existing tooling, consult Metav Werkzeuge for tailored recommendations. For procurement and specification support on the Kukamet 311 toggle latch clamp, contact Metav Werkzeuge for expert advice and reliable supply Technical data SKU: B311-2 GTIN: 8680731504705 ECLASS: 21041718 ETIM: EC011973 Manufacturer: Kukamet Core figures Arm / adjustable range: 32–62 mm Clamping force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Weight: 0.175 kg Special features Horizontal foot mounting With hook for quick engagement Blackened finish (protective surface) Category: Clamping element / toggle latch clamp FAQ What clamping and holding forces does the clamp provide? The clamp offers a clamping force of 1,500 N and a holding force of up to 2,000 N as specified for this toggle latch clamp. Which adjustment range does the arm cover? The adjustable arm covers 32–62 mm travel, with a thread length of 45 mm for fine setting and secure locking. How is the clamp mounted? The unit is mounted using a horizontal foot, suitable for fixture plates and low-profile installations. Is the surface treated for corrosion resistance? Yes, the part features a blackened finish that provides protective surface properties for workshop use. What is the product identifier for ordering? The clamp is listed as SKU B311-2 and can be referenced by GTIN 8680731504705 for procurement and inventory. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32-62mm Closure Clamp Horizontal Base With Safety Lock, 1,500N Pressure, 2,000N Holding Force - Kukamet
Take advantage of the compact horizontal-foot mounting, the safety locking mechanism and the reliable holding force of 2,000 N for secure, repeatable closures in fixtures and jigs. Order the latch clamp directly via Metav Werkzeuge or consult our specialists for integration advice. 311 latch clamp by Kukamet — horizontal foot, safety lock A robust 311 latch clamp designed for secure closure and repeatable positioning in jigs, fixtures and assembly applications, fitted with a horizontal foot for low-profile mounting Horizontal-foot mounting Safety locking mechanism Clamping arm 32–62 mm Holding force up to 2,000 N Reliable clamping for repeatable fixtures and reduced downtime The closure delivers a predictable combination of clamping force and holding force, with a maximum pressing force of 1,500 N and a maximum holding force of 2,000 N, ensuring components remain fixed during machining or assembly. The distinction between pressing and holding values is crucial: the pressing force refers to the applied closure action, while the holding force indicates the sustained retention once the clamp is engaged. This mechanical certainty reduces the risk of movement during processing, improves first-pass yield and shortens cycle times, offering a clear productivity advantage for repetitive operations. Compact horizontal mounting for tight workspaces and fast fixtures Equipped with a horizontal foot the clamp integrates into compact fixture layouts, providing a low-profile solution where vertical clearance is limited. The adjustable arm spans 32–62 mm, enabling simple adaption to varying part geometries without additional components. With an incorporated hook and a unit mass of only 0.175 kg, the device is easy to position and reconfigure on assembly boards or welding jigs. The quick-action lever permits rapid engagement and release, supporting faster setup changes and a more efficient workflow on small-batch or mixed-production lines. Practical finish, safety and straightforward machine-shop integration The device features a blackened finish that offers a visually discrete appearance and a degree of surface protection suitable for workshop environments. A dedicated safety lock prevents accidental opening under vibration or impact, enhancing operator safety and protecting delicate assemblies during handling. Built for integration into tooling plates and modular fixtures, the latch clamp requires minimal maintenance: periodic inspection of the lever and hook is normally sufficient to retain reliable performance. Suitable for use in assembly, inspection and light machining jigs, the clamp supports secure fixturing without complexity. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 311 latch clamp into production fixtures and to secure supply from our Emmerich quality hub Technical data SKU: B311-2-L GTIN: 8680731508246 Model: 311 Brand: Kukamet Facts Arm range: 32–62 mm Clamping force (max): 1,500 N Holding force (max): 2,000 N Thread length: 45 mm Weight: 0.175 kg Special features Horizontal foot mounting Safety locking mechanism With hook Blackened finish FAQ How is the clamp mounted to a fixture? The latch clamp mounts via a horizontal foot allowing low-profile installation; use the horizontal-foot base to bolt the unit into jigs or tooling plates (SKU B311-2-L). What is the difference between clamping force and holding force? Clamping force (1,500 N) is the immediate pressing action when engaging the lever, while holding force (2,000 N) describes the sustained retention once locked; both figures apply to the Kukamet 311 latch clamp. Which part sizes can the clamp accommodate? The adjustable arm covers a span of 32–62 mm, making the device suitable for a range of small to medium components commonly found in assembly and inspection fixtures. Is there a safety feature to prevent accidental release? Yes, the latch clamp includes a safety locking mechanism that secures the lever in the closed position to prevent unintended opening during operation. What finish and maintenance does the clamp require? The unit has a blackened finish; routine visual checks of the lever, hook and locking mechanism are normally sufficient to maintain reliable performance for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32-62mm Closure Clamp Horizontal Base With Safety Lock, 1.5kN Thrust, Zinc-Plated - Kukamet
Take advantage of a compact, galvanised locking clamp that combines reliable holding force and swift operation. With an adjustable arm of 32–62 mm and a maximum holding force of 2,000 N, this clamp supports secure fixture work while the safety lock ensures repeatable, safe clamping. Order the unit directly via Metav Werkzeuge or ask the consultants for application advice. 311 Locking Lever Clamp (horizontal base, galvanised) — Kukamet A 311 Locking Lever Clamp designed for secure, repeatable workholding in jigs, fixtures and general workshop clamping tasks. Galvanised steel construction Horizontal base for bench or fixture Safety lock for secure clamping 32–62 mm adjustable clamp arm Dependable clamping power for production tasks The clamp delivers measurable performance: a maximum pressing force of 1500 N and a holding force of 2000 N, specified for consistent part retention under load. Constructed from galvanised steel, the device resists corrosion in daily workshop use and maintains clamping accuracy over time. The adjustable arm range of 32–62 mm and a 45 mm thread length enable straightforward integration into fixtures and jigs. These specifications translate directly into less part movement during machining or assembly, reducing rework and improving throughput. Safe and repeatable operation for fixtures A horizontal base mount provides a stable attachment point for bench-top or plate-mounted applications, keeping the clamp aligned with tooling axes. The integrated safety lock prevents unintended release once the lever is closed, supporting safe use in automated or semi-automated workstations. The built-in hook adds versatility for temporary holding or quick-change setups. Together, these features reduce operator intervention and increase process reliability, especially where repetitive clamping cycles are required. Compact design that helps streamline workflows Weighing approximately 0.175 kg and featuring a compact lever layout, this locking toggle clamp is easy to position without adding bulk to the fixture. The lightweight yet robust construction simplifies retrofitting into existing tooling while the galvanised finish minimises maintenance needs. For workshops aiming to standardise clamping across multiple stations, the clamp’s consistent performance and modest footprint make it an efficient choice to harmonise operations and save set-up time. Contact Metav Werkzeuge for procurement and technical advice on the Kukamet 311 locking lever clamp — reach out via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 311-2-L GTIN: 8680731502244 eClass: 21041718 ETIM: EC011973 Facts Clamping arm range: 32–62 mm Maximum pressing force: 1500 N Maximum holding force: 2000 N Thread length: 45 mm Weight: 0.175 kg Special features Material: galvanised steel Mounting: horizontal base With hook With safety lock Brand: Kukamet SKU: 311-2-L FAQ What clamping range does the clamp cover? The clamp provides an adjustable arm range of 32–62 mm, suitable for a wide variety of fixture and workpiece sizes. What forces can be expected during use? The unit offers a maximum pressing force of 1500 N and a maximum holding force of 2000 N, ensuring firm retention in machining and assembly applications. Is the clamp suitable for workshop environments with occasional moisture? Yes, the galvanised steel construction gives the clamp enhanced corrosion resistance for typical workshop conditions. How is the clamp mounted to a fixture or bench? The clamp is supplied for horizontal-base mounting, making it straightforward to attach to plates, benches or fixture plates. Does the clamp include a safety feature to prevent accidental release? A built-in safety lock is provided to prevent unintended opening once the lever is engaged, improving operator safety and process reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32-62mm Closure Clamp Horizontal Foot With Hook, 1,500N Thrust / 2,000N Hold Stainless Steel - Kukamet
Take advantage of the combination of robust stainless-steel construction, high clamping and holding forces, and an adjustable arm for reliable fixture retention. Order directly via Metav Werkzeuge or contact their consultants for application advice. 311 toggle latch clamp — Kukamet stainless-steel latch clamp with horizontal base and 1,500 N clamping force The 311 toggle latch clamp is a compact stainless-steel clamp for secure fastening of panels and fixtures, offering an adjustable arm and a sturdy horizontal mounting foot for industrial and workshop applications. Stainless-steel construction for durability Adjustable arm 32–62 mm for flexible clamping Horizontal base for stable mounting 1,500 N clamping force, 2,000 N holding capacity Consistent, measurable clamping performance for production use The latch is engineered to deliver a repeatable clamping action that is quantified by a clamping force of 1,500 N and a holding capacity of 2,000 N, ensuring components remain secured under vibration and handling. This measurable performance reduces rework and shortens setup intervals in jigs and fixtures. The mechanical action is designed to be reliable over many cycles, so the fixture behaviour can be predicted and incorporated into process planning. Corrosion resistance and low-maintenance operation for workshop environments Constructed from stainless steel, the device resists corrosion in humid or chemically exposed environments and is suitable for general-purpose shop floors where longevity and cleanliness matter. The low mass of 0.175 kg reduces inertia during repeated handling and contributes to a compact footprint on the fixture. Routine maintenance is limited to occasional lubrication of pivot points; the material choice minimises the need for costly replacements and supports long service intervals. Fast mounting, adjustable reach and user-friendly engagement The clamp features an adjustable arm (32–62 mm) and thread length 45 mm, allowing adaptation to a variety of panel thicknesses and engagement depths without bespoke parts. A horizontal mounting foot enables flush mounting to plates or rails, while the integrated hook facilitates rapid engagement and reliable locking. These characteristics make the product suitable for assembly jigs, inspection fixtures and production tooling where quick clamping and precise positioning are required. For robust, corrosion-resistant clamping choose Kukamet’s solution and contact Metav Werkzeuge in Emmerich for detailed application support and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S311-2 GTIN: 8680731504057 Material: stainless steel Weight: 0.175 kg Brand: Kukamet Facts Arm range: 32–62 mm Clamping force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Mounting type: horizontal foot SKU: S311-2 ETIM: EC011973 ECLASS: 21041718 Special features With hook for quick engagement Compact, low-mass design Corrosion-resistant material Suitable for jig and fixture applications FAQ What clamping and holding forces does this clamp provide? The 311 toggle latch clamp delivers a clamping force of 1,500 N and a maximum holding capacity of 2,000 N, suitable for repeated fixture retention tasks. Is the clamp suitable for use in damp or corrosive environments? Yes. The clamp is made from stainless steel, which provides enhanced corrosion resistance and reduces maintenance in damp or mildly corrosive workshop conditions. How is the clamp mounted and what mounting orientation is required? The device uses a horizontal mounting foot for secure, flush installation on plates or rails; the mounting arrangement supports stable clamping in production tooling. What adjustment range does the arm provide? The adjustable arm covers 32–62 mm, enabling adaptation to various panel thicknesses and engagement depths without custom parts. Does the clamp include any quick-engagement feature? Yes. The model is supplied with a hook that facilitates rapid engagement and positive locking during repeated operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32-62mm Closure Clamp Horizontal Foot With Hook, 1,500N Thrust / 2,000N Hold, Zinc Plated - Kukamet
Take advantage of the galvanised construction, adjustable arm span and robust holding capacity for reliable fixture work; order the latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. 311 latch clamp by Kukamet — galvanised, hook, horizontal base The 311 is a galvanised latch clamp with a horizontal base, designed to provide secure, repeatable fastening and rapid release for jigs, fixtures and production tooling. Galvanised steel construction Horizontal base mounting Hook-equipped for secure engagement Adjustable arm 32–62 mm Consistent clamping performance for production environments The latch clamp delivers a controlled closing force and a defined holding capacity, engineered for repeatable operation in assembly and jig applications. With a closing force of 1,500 N and a holding force of 2,000 N, the device converts lever action into reliable retention, reducing fluctuation during cycle work. The mechanical principle avoids complex pneumatics, offering straightforward installation and predictable behaviour under load, which supports consistent throughput on production lines. Flexible installation and quick adjustments for different set-ups Fitted with a horizontal base and an adjustable arm spanning 32–62 mm, the clamp adapts to a variety of workpiece thicknesses without changing the fixture. The 45 mm thread length provides secure attachment and clearance for fine adjustment during assembly. The integrated hook secures into place for positive engagement, simplifying lateral alignment. These features make the clamp suitable for fixtures where space is limited and repeatable positioning is required. Corrosion-resistant finish and low-maintenance operation Constructed from galvanised steel, the latch clamp resists surface corrosion in workshop environments and requires minimal upkeep. The lightweight design (approx. 0.175 kg) reduces the load on fixture plates while maintaining robust performance. For users seeking economy without sacrificing durability, the unit offers a balance of long service life and straightforward maintenance: regular visual checks and occasional lubrication of pivot points keep function optimal. Choose the Kukamet 311 latch clamp for dependable, repeatable clamping in production — contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 311-2 GTIN: 8680731502237 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.175 kg Arm range: 32–62 mm Closing force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Special features Material: galvanised steel Mounting: horizontal base Hook: integrated Category: clamp With hook: yes FAQ What mounting style does this clamp require? The latch clamp uses a horizontal base mounting, offering a flat installation footprint suitable for fixture plates and jigs. What range of workpiece thickness can be accommodated? Adjustability is provided by the arm span of 32–62 mm, allowing the clamp to be set for different material thicknesses without additional parts. How strong is the retention provided by the clamp? The clamp provides a closing force of 1,500 N and a holding force of 2,000 N, which ensures secure retention for standard assembly and fixturing tasks. Is the clamp suitable for use in humid or workshop environments? Yes. The galvanised finish on the clamp offers surface corrosion resistance appropriate for typical workshop conditions and light industrial use. Who manufactures this latch clamp and what is the SKU? The clamp is manufactured by Kukamet and is listed under SKU 311-2. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32-62mm Latch Type Toggle Clamp Horizontal Base With Safety Lock, 1.5kN Thrust, Stainless Steel - Kukamet
Combining corrosion-resistant stainless steel, an adjustable arm 32–62 mm and a positive safety lock, this latch clamp delivers reliable holding and compact installation. Order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Latch clamp 311 — stainless-steel draw latch with safety lock and adjustable arm The Latch clamp 311 is a stainless-steel draw latch designed for secure over-centre fastening in fixtures and jigs, suitable for light to medium-duty industrial applications Stainless steel construction, corrosion-resistant Adjustable arm 32–62 mm Safety lock prevents accidental release High holding force up to 2,000 N Reliable clamping in compact assemblies The latch is manufactured from stainless steel, providing corrosion resistance and dimensional stability in workshop and production environments. With a holding force of 2,000 N, the device secures components reliably in assembly, welding and inspection jigs; the result is consistent part positioning and fewer rejects. The adjustable arm (32–62 mm) allows adaptation to varying panel gaps or fixture heights, reducing the need for multiple latch sizes and simplifying fixture design for operators and maintenance staff. Quick adjustment and fail-safe locking for repeatable processes Designed with a positive safety lock, the clamp prevents unintended release during handling or vibration-prone processes, increasing operator confidence and reducing stoppages. The mechanism provides a maximum pressing force of 1,500 N, supplying the necessary closing pressure for many clamping tasks while the integrated hook ensures secure engagement. Horizontal foot mounting facilitates flush installation on fixture plates and offers straightforward access for routine checks or rapid replacement when required. Durable, lightweight design that supports uptime At just 0.175 kg, the clamp combines a low mass with robust performance, minimising added load on movable fixtures and simplifying retrofits. Thread length and standardised mounting allow repeatable assembly and easy integration into existing jigs, contributing to shorter set-up times. The corrosion-resistant finish lowers maintenance needs and extends service life, supporting predictable operating costs and uninterrupted production cycles for workshops and small series manufacturing. For robust, corrosion-resistant clamping choose the Kukamet latch clamp 311; contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — info@metav-werkzeuge.com / +49 2822 7131930. Technical Data Article number: S311-2-L GTIN: 8680731504064 Manufacturer: Kukamet Facts Arm range: 32–62 mm Max pressing force: 1,500 N Max holding force: 2,000 N Thread length: 45 mm Weight: 0.175 kg Special features Material: stainless steel Mounting: horizontal foot Hook: yes Safety lock: yes SKU: S311-2-L FAQ What environments is the clamp suitable for? The latch clamp 311 is made from stainless steel and is therefore suitable for workshop and light industrial environments where corrosion resistance is required. Can the holding and pressing forces be used simultaneously? Yes, the specification lists a maximum pressing force of 1,500 N and a holding force capability up to 2,000 N, enabling the clamp to provide both closing pressure and secure retention. Is the arm length adjustable for different panel gaps? Adjustment is possible within the 32–62 mm range, allowing the latch to adapt to varying joint or fixture dimensions. How is the clamp mounted to a fixture plate? The clamp is supplied for horizontal foot mounting, enabling flush attachment to fixture plates and straightforward replacement or repositioning. Does the latch include any safety features to prevent accidental release? Yes, the device incorporates a positive safety lock that prevents unintended opening under vibration or accidental contact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32-67mm Clamp With Hook Horizontal Base, 2,200N Thrust / 3,200N Holding - Kukamet
Take advantage of the combination of robust galvanised construction, an adjustable arm 32–67 mm, and high holding force 3,200 N for dependable clamping in production or jig work. Order the clamp directly via Metav Werkzeuge or ask the Metav consultants for application support. 311 toggle clamp — horizontal foot mount, galvanised (Kukamet) 311 toggle clamp is a horizontal-foot closure clamp designed for secure, repeatable fixing of workpieces in assembly, welding and fixture applications Galvanised steel for corrosion resistance Holding force 3,200 N for secure clamping Adjustable arm 32–67 mm for variable workpieces Horizontal foot mount for stable installation Dependable performance for repeatable production The 311 model delivers reliable mechanical advantage through a compact toggle mechanism that converts lever action into a high clamping force. With a pressing force of 2,200 N and a holding force of 3,200 N, the clamp is suited to repeated clamping cycles in medium-duty production and jig assemblies. The galvanised finish reduces the risk of corrosion, maintaining surface integrity in workshop environments and extending service life. Explaining the forces: the pressing force is the direct output of the clamping stroke, while the holding force indicates the clamp’s resistance to unintended release under load. Built to integrate into workshop fixtures with minimal effort Fitted with a horizontal foot mount, this closure clamp installs flush to baseplates and fixture plates, providing a low-profile anchoring point that keeps work areas clear. The threaded length of 75 mm enables straightforward attachment and fine positional adjustment when used with T-slots or mounting holes. The combination of a hook function and adjustable arm means variants of the clamp can engage a range of workpiece geometries without elaborate rework of the jig, improving uptime and reducing fixture changeover time. Practical adjustability that speeds set-up The adjustable arm 32–67 mm makes it simple to accommodate parts with varying thicknesses or irregular shapes. Adjustment is mechanical and immediate, avoiding time-consuming shims or temporary packers. The hook feature provides reliable engagement for workpieces or fixtures where a direct strap or catch is required, while the galvanised surface supports maintenance intervals by resisting typical workshop contaminants. For operations requiring consistent pressure and repeatability, the clamp’s design reduces setup variability and supports quality assurance processes. A compact, workshop-ready solution that supports workflow At roughly 0.335 kg, the clamp combines a lightweight footprint with meaningful clamping capacity, allowing fixture designers to implement multiple clamps without excessive added mass. The component’s dimensions and mounting style make it suitable for assembly lines, welding jigs and general workshop fixtures where space is limited but stable clamping is essential. Sourcing from a manufacturer with European distribution ensures supply reliability and reduces procurement complexity for maintenance and production teams. Contact Metav Werkzeuge for tailored advice on selecting Kukamet toggle clamps and to secure fast, dependable supply from Emmerich. Technical Data Article number: 311-3 GTIN: 8680731502251 Manufacturer: Kukamet Facts Arm range: 32–67 mm Threaded length: 75 mm Pressing force max: 2,200 N Holding force max: 3,200 N Weight: 0.335 kg eClass: 21041718 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot With hook Category: Spanner SKU: 311-3 FAQ What types of applications suit this closure clamp? The Kukamet 311 toggle clamp (SKU 311-3) is suited to assembly jigs, welding fixtures and general-purpose workshop clamping where repeatable, medium-duty holding is required. How is the clamp mounted and adjusted? Mounting uses the horizontal foot; the threaded length of 75 mm allows secure fastening and positional adjustment, while the arm is adjustable between 32–67 mm for part variation. Can the clamp withstand workshop environments? The galvanised finish on the Kukamet 311 provides corrosion resistance appropriate for typical workshop and light industrial conditions. What do the specified forces mean for daily use? The pressing force (2,200 N) is the active clamping output during engagement; the holding force (3,200 N) indicates resistance against release under load, supporting secure retention in fixtures. Is the clamp suitable for custom fixtures with irregular shapes? Yes, the adjustable arm and hook feature allow the clamp to engage a range of geometries without extensive fixture modification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com