Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
32mm Magnetic Flat Gripper H7 No Threaded Bush Holding Force 80N - TECWERK
Take advantage of a compact design with reliable 80 N holding force and hard ferrite construction for steady, low-profile temporary fixing; order directly via Metav Werkzeuge or consult the Metav team for application advice. Flat magnetic gripper D32×H7 mm – 80 N, TECWERK The Flat magnetic gripper D32×H7 mm is a compact, ceramic magnet designed for secure temporary fastening and positioning in light-duty assembly, fixture and automation applications. *Compact 32 mm diameter for tight spaces Reliable 80 N maximum holding force Hard ferrite material for thermal stability Designed without threaded bush for flush mounting Consistent clamping with measurable holding force The flat magnetic gripper delivers a clear 80 N holding force, providing a predictable clamping action for small components and jigs. The specified holding capacity enables planners and engineers to calculate safety margins and define handling procedures with confidence. As a passive magnetic element, the component offers immediate magnetic attraction without additional actuation, which simplifies fixture design and reduces the number of moving parts required for temporary fastening. The compact footprint supports integration where space is constrained. Temperature-resistant, low-maintenance material choice Constructed from hard ferrite, this magnet affords good thermal resistance compared with many polymer-bonded alternatives. The product is rated with a recommended operating temperature up to 100 °C and a maximum of 200 °C, making it suitable for elevated-temperature assembly processes and short-term exposure to heat during production. Hard ferrite is a ceramic magnetic material that maintains magnetic characteristics at higher temperatures while remaining chemically stable; however, designers should consider the material's brittleness when specifying mechanical interfaces or impacts. Low-profile installation and straightforward integration With a 32 mm diameter and 7 mm overall height, the unit is engineered for flush mounting and minimal protrusion from fixture surfaces. The version supplied without a threaded bush reduces overall thickness and allows direct bonding, countersinking or clamping into shallow recesses in tooling plates. This low profile facilitates closer stacking of components and conserves valuable toolroom real estate. Integration into light-duty assembly rigs or positioning stations is therefore simpler and more space-efficient. For robust, space-saving magnetic holding in small-assembly tasks choose the TECWERK flat magnetic gripper and contact Metav Werkzeuge for bespoke advice and supply from Emmerich. Technical data Article number: 4000832235NW Product type: Flat magnetic gripper Brand: TECWERK Version: without threaded bush Facts Diameter: 32 mm Height: 7 mm Holding force max: 80 N Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C Special features Material: hard ferrite Packaging unit: 10 Compact, low-profile design FAQ What holding capacity does the gripper provide? The TECWERK flat magnetic gripper provides a maximum holding force of 80 N, suitable for securing small parts and fixtures in light-duty applications. Is the magnet suitable for elevated temperatures? Yes. The unit is constructed from hard ferrite and is recommended for use up to 100 °C with a maximum permissible temperature of 200 °C for short exposures. How is the gripper mounted if it has no threaded bush? The version without a threaded bush is intended for flush mounting into shallow recesses, bonding or clamping within tooling plates to achieve a low-profile installation. What are the exact dimensions of the component? The gripper measures 32 mm in diameter with a height of 7 mm, providing a compact footprint for tight assembly spaces. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
32mm Magnetic Flat Gripper With Threaded Bush, Holding Force 80N, Up To 200°C - TECWERK
Take advantage of a compact, reliable magnetic hold combined with straightforward mounting and heat tolerance for efficient fixturing and short setup times; order directly via Metav Werkzeuge or contact our consultants for specification support. Magnetic flat gripper D32×H15 mm (M4) — 80 N holding force by TECWERK The magnetic flat gripper D32×H15 mm with an M4 threaded bush provides compact, non-powered holding for fixtures and small assemblies. Compact 32 mm diameter, 15 mm height Secure M4 threaded bush mounting 80 N holding force for stable fixturing Hard ferrite magnet for consistent performance Space-saving, high-hold fixturing for production The Magnetic flat gripper D32×H15 mm with M4 threaded bush and 80 N holding force is engineered for applications where a small footprint and reliable clamping are required. With a 32 mm diameter and 15 mm height, the unit occupies minimal space while delivering a rated 80 N of holding force — a practical balance between size and performance. The hard ferrite construction ensures magnetic stability under normal workshop conditions, while the compact form supports dense arrangements on assemblies and jigs. This makes the component suitable for repetitive assembly tasks, small-part fixturing and conveyor positioning where a consistent magnetic hold reduces repositioning and handling time. Fast, secure mounting and reduced setup time Mounting is simplified by the integral M4 threaded bush, which permits direct fastening into fixtures, plates or machine guards without additional adapters. The threaded insert secures the magnet mechanically, allowing rapid installation and minimal alignment effort in production setups. Because the gripper is non-powered, there is no need for wiring or pneumatic control, which shortens commissioning and lowers maintenance requirements. The combination of mechanical fixation and magnetic holding reduces the need for additional clamps, helping to streamline changeovers and increase throughput in workshops and small production runs. Temperature performance and workshop resilience The unit is specified with a recommended operating temperature of up to 100 °C and a maximum of 200 °C, offering resilience where elevated temperatures occur during processing or near heated tooling. The hard ferrite material provides stable magnetic properties across the stated temperature range; appropriate selection of the operating point will extend service life and maintain holding capacity. Supplied in a packaging unit: 10, the grippers are practical for batch replacement or equipping multiple stations. The robust, simple design supports routine industrial use while keeping handling and inventory straightforward. For dependable, compact magnetic fixturing choose the TECWERK magnetic flat gripper—contact Metav Werkzeuge for tailored advice and prompt dispatch from Emmerich. Technical data Article number: 4000832245NW Product type: Magnetic flat gripper Manufacturer: TECWERK Dimensions & core data Diameter: 32 mm Height: 15 mm Thread: M4 Holding force: 80 N Packaging unit: 10 Materials & operating conditions Material: Hard ferrite Version: with threaded bush Recommended operating temp: up to 100 °C Maximum operating temp: 200 °C FAQ What holding force does the gripper provide? The TECWERK magnetic flat gripper delivers a rated holding force of 80 N (SKU 4000832245NW), suitable for secure retention of small ferrous components. How is the gripper mounted? Mounting is via the integrated M4 threaded bush; the M4 thread allows direct fastening into fixtures or plates for a stable mechanical connection. Which materials can be held by the magnet? The device is intended for ferromagnetic workpieces such as steel; the magnetic flat gripper provides a reliable hold for typical ferrous assemblies and small components. Can the gripper be used near heated tooling? Yes. The gripper is specified with a recommended operating temperature up to 100 °C and a maximum of 200 °C; observe the recommended limit for prolonged performance. Is this product suitable for series production and workshop use? The compact design, standard M4 mounting and consistent magnetic performance make the unit appropriate for workshop applications, jigs and small-series production fixtures. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
32mm Quick-Change Holder With Prism For Round Drill Bars, 130mm Length - TECWERK
Take advantage of a precise prism clamp and a 32 mm clamping diameter for consistent tool alignment and fast, reliable tool changes; order the interchangeable holder directly or consult Metav Werkzeuge for system integration and compatibility advice. Interchangeable holder for Steel Holder Head B — prism clamp, 32 mm | TECWERK The Interchangeable holder for Steel Holder Head B is a precision clamping component designed to centre round drill shanks in quick-change steel holder heads for stable, repeatable tool holding. Prism clamp for round drill shanks 32 mm clamping diameter Compatible with Steel Holder Head B 1 Length 130 mm for stable engagement Repeatable centring and reduced runout for improved process stability A prism-based clamping interface delivers reliable alignment of round shanks: the integrated prism centres the tool shaft and, as a result, helps to reduce radial runout during operation. This mechanical centring is particularly valuable in setups where precision and repeatability directly affect cycle times and surface quality. The holder’s 32 mm clamping diameter provides a clear specification for tool selection and spare-part management, while the robust engagement profile ensures consistent contact in repetitive machining cycles. For production environments that prioritise measurable accuracy, the prism clamp is a simple mechanical solution that supports predictable performance. Efficient integration into quick-change tool systems Designed for use with a quick-change steel holder head, the component supports rapid tool swaps without compromising positional accuracy. Compatibility with Steel Holder Head B 1 simplifies inventory planning and reduces tooling complexity across toolrooms and maintenance benches. The specified length 130 mm and a working height of 32 mm combine to create a stable interface that resists lateral play when the system is mounted and torqued. In rational terms, less adjustment and fewer regrips translate into shorter set-up times and higher effective machine availability — a direct operational benefit for production-focused teams. Practical handling, maintenance and workshop fit Mounting and routine inspection are straightforward: the prism seat requires only visual verification and periodic cleaning to maintain optimal contact between shank and holder. The design minimises wearing surfaces and does not rely on complex moving parts, which keeps maintenance effort low and spare-part needs predictable. As a modular clamping solution, the interchangeable holder supports standardisation across multiple stations, aiding procurement and reducing the number of unique items stocked. For workshop managers aiming to consolidate tooling while keeping quality consistent, this clamping insert offers an effective balance between durability and serviceability. For tailored advice on integrating the TECWERK interchangeable holder into existing quick-change systems, or for supply options from Metav Werkzeuge, contact Metav Werkzeuge for precise recommendations and reliable logistics support from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000832166NW Manufacturer: TECWERK Product type: Interchangeable holder Label: Wechselhalter for Steel Holder Head B for round drill shanks clamping D.32mm TECWERK Facts Clamping diameter: 32 mm Height: 32 mm Length: 130 mm Packaging unit: 1 Special features Prism for round drill shanks For quick-change steel holder head Suitable for Steel Holder Head B 1 Stable engagement for repeatable centring FAQ What clamping diameter does this holder support? The TECWERK interchangeable holder supports a 32 mm clamping diameter, specified for accurate selection of matching round shanks. Is the holder compatible with quick-change systems? Yes — the component is designed for use with quick-change steel holder heads and is expressly compatible with Steel Holder Head B 1. How does the prism improve machining accuracy? The integrated prism centres round tool shanks in the seat, reducing radial runout and improving repeatability during machining operations with the interchangeable holder. What are the key dimensions to note before installation? Key figures: length 130 mm, height 32 mm, clamping diameter 32 mm; these dimensions define mounting depth and engagement for the interchangeable holder. Which workshop applications benefit most from this holder? Toolrooms, drilling stations and production cells that require frequent tool changes and consistent alignment will find the TECWERK interchangeable holder valuable for standardisation and uptime optimisation. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
32mm Spannzangenfutter ER Spannbereich 1-10mm A 100mm, DIN 69871 Form AD - TECWERK
Spannzangenfutter ER DIN 69871 Form AD (SK40, A 100 mm) Das Spannzangenfutter ER DIN 69871 Form AD von TECWERK für präzise Werkzeugspannung in SK40-Aufnahmen Steilkegel nach DIN 69871 Form AD Kompatibel mit SK40 Aufnahmen Spannbereich 1-10 mm für Zylinderschaft Baulänge A 100 mm, Durchmesser 32 mm Hohe Präzision für den Produktionsalltag Das Spannzangenfutter wurde gezielt für die zuverlässige Aufnahme von Werkzeugen mit Zylinderschaft entwickelt und garantiert durch den Steilkegel DIN 69871 Form AD sichere Kraftübertragung. Die Spannbereich 1-10 mm erlaubt flexiblen Einsatz von feinen bis mittelgroßen Schaftdurchmessern, wodurch Rüstzeiten reduziert und Werkzeugwechsel beschleunigt werden. Anwender profitieren von konstanter Spannkraft, die Ausschuss minimiert und die Prozessstabilität erhöht. Kompatibilität und einfache Montage für Werkstatt und Produktion Dank der SK40-Aufnahme lässt sich das Futter direkt in gängige Maschinenspindeln integrieren. Die kompakte Bauform mit A 100 mm und Durchmesser 32 mm sorgt für gute Zugänglichkeit an Bearbeitungsstellen und reduziert Kollisionsrisiken. Das ER-System bietet hohen Rundlauf und einfache Handhabung beim Ein- und Ausspannen der Spannzange, was die Bedienung vereinfacht und Stillstandszeiten verringert. Anwendungsnutzen und Zielgruppe Konzipiert für Metallbearbeitung, Werkzeug- und Formenbau sowie Serienfertigung, eignet sich das Futter besonders für Betriebe, die flexible Werkzeugbestückung und kurze Umrüstzeiten benötigen. Betreiber von CNC-Fräsen und Bearbeitungszentren erreichen mit diesem System bessere Oberflächen und gleichbleibende Bauteilqualität. Die klare Normausführung macht die Auswahl und Dokumentation in Fertigungsprozessen einfacher und nachvollziehbar. Warum dieses System wählen Die Kombination aus bewährter Normausführung und universellem ER-System bietet ein hervorragendes Verhältnis von Wirtschaftlichkeit und Präzision. Für Entscheider bedeutet das kalkulierbare Prozesse, weniger Nacharbeit und verbesserte Fertigungsqualität. Wer auf standardisierte Schnittstellen setzt, kann Programme, Spannmittel und Werkzeuge über verschiedene Maschinen hinweg einfacher austauschen. Empfehlung: Für präzise, normgerechte Werkzeugspannung in SK40-Aufnahmen empfiehlt sich dieses Spannzangenfutter von TECWERK; bei Fragen zur Einsatzfähigkeit oder zur Integration in vorhandene Spindeln steht Metav persönlich zur Beratung zur Verfügung — eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 2000833706NW Marke: TECWERK Produktart: Spannzangenfutter ER Norm: DIN 69871 Form AD Fakten Durchmesser: 32 mm Spannbereich: 1-10 mm A (Baulänge): 100 mm Verpackungseinheit: 1 Besonderheiten Aufnahme: ER 16 / 426 E 1 SK40: Aufnahmeschaft für Maschinenspindeln Steilkegel DIN 69871 Form AD: kegelige Aufnahme Norm ER: Spannzangensystem für flexible Schaftspannungen FAQ Wie groß ist der Spannbereich und für welche Schaftformen ist das Futter geeignet? Der Spannbereich beträgt 1-10 mm; das Spannzangenfutter ist ausgelegt für Zylinderschaft-Werkzeuge und Spannzangen nach DIN 6499. Ist das Spannzangenfutter mit SK40-Spindeln kompatibel? Ja, die Ausführung ist für SK40-Aufnahmen konzipiert und lässt sich direkt in entsprechende Maschinenspindeln einbauen. Welche Normen beschreibt das Produkt und warum ist das wichtig? Das Futter entspricht der DIN 69871 Form AD, eine Standard-Norm für kegelige Werkzeugaufnahmen, die Austauschbarkeit und Prozesssicherheit in der Fertigung gewährleistet. Für welche Maschinen und Anwender ist dieses Spannzangenfutter besonders geeignet? Hauptsächlich für CNC-Fräsen und Bearbeitungszentren in Werkstätten, Werkzeugbau und Serienfertigung, die normgerechte, schnelle Werkzeugwechsel benötigen. Welche Vorteile bringt das ER-System beim täglichen Einsatz? Das ER-System ermöglicht schnellen Werkzeugwechsel, guten Rundlauf und flexible Spannbereiche, wodurch Rüstzeiten sinken und Fertigungsqualität steigt. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
32mm Tool Holder E1 For Indexable Drills With Internal Coolant, DIN 69880 - TECWERK
Benefit from precise VDI40 mounting, internal coolant capability and DIN 69880 conformity to ensure consistent clamping and reliable drilling cycles; order the tool holder directly via Metav Werkzeuge or ask our consultants if needed. Tool holder E1 DIN 69880 — VDI40 clamping Ø32 mm, TECWERK A Tool holder E1 DIN 69880 designed for indexable insert drills, offering a cylindrical shank and coolant-through capability for machining centres and lathes. VDI40 mounting for precise repeatability Conforms to DIN 69880 standard Internal coolant supply for chip evacuation Clamping diameter Ø32 mm, robust cylindrical shank Faster set-ups through standardised VDI40 mounting The VDI40 interface provides high repeatability and quick tool changes, reducing machine downtime and setup complexity. With adherence to DIN 69880, the holder guarantees dimensional compatibility across systems that use the same standard, so toolholders and adaptors fit consistently. This standardised connection translates into measurable time savings on serial production runs and simplifies tool inventory management in workshops and production cells. Coolant-through design that protects inserts and improves cycle stability The internal coolant supply directs lubricant and coolant to the cutting edge, improving chip evacuation and heat control during drilling operations. By maintaining a stable thermal environment at the cutting zone, the coolant-through feature helps to extend insert life and maintain hole quality over long cycles. For operations combining drilling and light turning, efficient coolant routing reduces the risk of built-up edge and minimises rework. Robust geometry for industrial use and vibration resistance The holder’s cylindrical shank and E1 form offer a compact, rigid connection suited to medium-duty machining tasks. The measured clamping diameter of Ø32 mm supports stable seating of indexable insert drills and reduces deflection under cutting forces, which benefits hole concentricity and surface finish. The construction is aimed at keeping vibrations low and ensuring repeatable results in batch production. Straightforward integration with indexable insert drills and tooling kits Designed specifically for indexable insert drills, the holder accepts standard insert drill cartridges and integrates with typical spindle setups that use VDI40. The compact l1 and l3 dimensions provide a predictable tool envelope for programming and collision avoidance. Workshops benefit from easier tool management and a consistent reference length when planning setups for automated or manual machining operations. For tailored advice on selecting the right VDI40 tool holder for specific drilling tasks or to order this TECWERK tool holder via Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 2000833669NW Brand: TECWERK Product type: Tool holder for indexable insert drills Form: E1 Standard: DIN 69880 Core data d2: 32 mm h1: 32.5 mm d1: 40 mm d3: 52 mm l3: 22 mm d6: 83 mm l1: 75 mm Special features For indexable insert drills With cylindrical shank Coolant-through for drilling and turning tools Conforms to DIN 69880 Packaging unit: 1 FAQ What interface does this tool holder use? The tool holder uses a VDI40 interface, ensuring standardised mounting and precise repeatability for indexable insert drilling applications. Is the tool holder suitable for coolant-through drilling? Yes, the holder is designed with internal coolant supply, enabling effective coolant routing to the cutting edge for improved chip evacuation and tool life. Which drill diameter does the holder accept? The clamping diameter is Ø32 mm, suitable for compatible indexable insert drill cartridges and tooling systems. Does the product comply with industry standards? The tool holder conforms to DIN 69880, providing predictable dimensions and compatibility across systems that follow the same standard. What is the article number for ordering? The SKU for ordering is 2000833669NW, listed for the TECWERK tool holder E1 designed for indexable insert drills. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
32mm Tool Holder E2 For Boring Bars With Internal And External Coolant Supply, DIN 69880 - TECWERK
Data inconsistency detected: the product data lists both internal and external coolant supply and explicitly states not through-drilled, which is contradictory and prevents a reliable product description. This discrepancy creates confusion regarding the actual specifications of the product, making it difficult to determine its intended functionality or compatibility with specific applications. Accurate and consistent information is essential for ensuring that customers can make informed decisions and avoid potential issues during use. It is recommended that the manufacturer or responsible party review and clarify the product details to resolve this inconsistency and provide a clear, reliable description. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
32x300 mm Runout Test Mandrel, 0.005 mm Runout Accuracy, Hardened Gauge Steel, DIN 229 - Metav IndustryLine
Take advantage of the high-precision 0.005 mm runout and robust, hardened gauge steel construction to ensure reliable spindle alignment and repeatable quality checks; order the inspection mandrel directly via Metav Werkzeuge or consult our technical team for application advice. Inspection Mandrel MT4 – Ø32×300 mm, runout 0.005 mm (Metav IndustryLine) The Inspection Mandrel MT4, Ø32×300 mm is a precision test arbor for runout measurement and alignment of machine spindles with a Morse taper fitting. Runout accuracy 0.005 mm MT4 taper for spindle fitting Hardened gauge steel construction Total length 430 mm, weight 3.5 kg Precision that reduces rework and protects tooling The mandrel delivers a guaranteed runout of 0.005 mm, which provides a reliable reference for concentricity checks and helps to reduce scrap and rework in precision machining. By using a stable reference element with Ø32×300 mm working length and a well-defined taper, inspection cycles become faster and more decisive. The measurable improvement in setup reproducibility translates into lower downtimes and longer tool life, a clear advantage in production and maintenance environments. Robust build for long-term consistency Manufactured from hardened gauge steel and produced to DIN 229 standards, the device resists wear and maintains dimensional stability under repeated handling. The heavier mass and total length 430 mm contribute to a stable measuring condition when seated in the spindle, reducing vibration influence during assessment. These construction choices ensure that the reference stays accurate over time, supporting consistent quality control without frequent replacement. Practical use for alignment and inspection tasks Designed for runout testing and spindle alignment, the inspection mandrel fits directly into machine spindles with an MT4 taper and serves as a true radial reference for a dial indicator or displacement sensor. The mandrel’s balance and clear cylindrical tolerance allow quick verification of spindle concentricity and the detection of bearing or taper seating faults. Suitable for workshop calibration routines and maintenance checks, this test arbor is a straightforward tool for technicians seeking repeatable alignment results with minimal setup complexity. Contact Metav Werkzeuge for tailored application guidance or to reserve the MT4 inspection mandrel; technical consultants at Metav Werkzeuge in Emmerich are available by phone or email to advise on compatibility and delivery options. Technical Data Article number: M318.934 GTIN: 4054469183930 Type: MT4 inspection mandrel Standard: DIN 229 Facts Diameter: 32 mm Working length: 300 mm Total length: 430 mm Weight: 3.5 kg Runout accuracy: 0.005 mm Special features Material: hardened gauge steel Mounting: MT4 taper Suitable for runout testing and spindle alignment Category: Gauges (Lehren) FAQ What runout precision can be expected from this mandrel? The Inspection Mandrel MT4 provides a runout accuracy of 0.005 mm, suitable for high-precision spindle checks. Which spindles will the mandrel fit? The mandrel is designed for spindles accepting an MT4 (Morse taper 4) fitting and is intended for direct seating in such spindle noses for alignment work. What material and standard apply to this tool? This Metav IndustryLine inspection mandrel is made from hardened gauge steel and manufactured to DIN 229 specifications. How is the mandrel used during a runout check? The mandrel is seated in the spindle taper and a dial indicator or displacement sensor measures radial deviation along the cylindrical portion to assess spindle concentricity. Which product code identifies this item? This item is listed as M318.934 from Metav IndustryLine and is provided for workshop and maintenance inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32x30x19mm Step Block - Vertex
Benefit from a compact, reliable step block that integrates into existing clamping systems to improve repeatability and setup speed; its small footprint and step-format geometry make it ideal for tight fixture layouts. Order directly via Metav Werkzeuge or consult our experts for application advice. Step Block – Vertex compact step block with step-format geometry, 32 x 30 x 19 mm Step Block is a compact fixture element designed to provide stable elevation and repeatable positioning in machining and clamping setups, suitable for workshop and industrial fixturing tasks Compact footprint 32 x 30 x 19 mm Step-design for secure clamping Precision-manufactured by Vertex Suitable for workshop fixturing Space-saving design for denser fixture layouts The compact footprint of this step-format block (measuring 32 x 30 x 19 mm) enables tighter component arrangement on tooling plates and vises, saving valuable working area. Where bench space or T‑slot real estate is limited, a smaller elevation element reduces interference with adjacent clamps and tooling heads. This geometry supports faster changeovers and contributes to shorter setup times, delivering a clear increase in process efficiency without requiring bespoke fixturing solutions. Consistent elevation and repeatability for machining operations The stepped profile ensures stable contact points for jaws and locating faces, promoting repeatable workpiece positioning across successive setups. By using a dedicated step element rather than improvised supports, setups become more predictable and inspection processes simpler. The design translates directly into fewer alignment adjustments, which reduces idle time on the machine and supports higher throughput while maintaining machining tolerances. Supply reliability and practical workshop benefits Sourced from Vertex, the block fits into a broad array of standard clamping routines and is suitable for both one-off jobs and series production due to its straightforward geometry. Stocking compact, standardised elements like this reduces the need for bespoke fixtures and simplifies inventory management. Combined with Metav Werkzeuge’s European distribution and quality filter in Emmerich, customers gain access to dependable supply, transparent ordering and a wide selection of complementary fixturing components for a coherent workshop setup. Contact Metav Werkzeuge in Emmerich to discuss integration into existing fixtures or to request a tailored supply recommendation for Vertex step block 5114B Technical Data Article number: 5114B GTIN: 4061905090486 Designation: Step Block Facts Dimensions: 32 x 30 x 19 mm eClass: 21170107 Special features Step-format geometry for elevation and indexing Compact size for space-efficient layouts Brand: Vertex FAQ What is the primary application of this block? The block is intended as a step-format fixturing element for elevation and repeatable positioning in clamping and machining setups, as supplied under the Vertex designation. Will this fit standard T-slot clamp systems? Compatibility depends on the specific clamp and plate dimensions; the block’s compact 32 x 30 x 19 mm size makes it suitable for many standard arrangements, but checking fixture geometry is recommended. Is the material specified for the step element? The raw data does not specify a material for the block; the Vertex product listing should be consulted for material and hardness details where required. Can the block be stacked or combined with other locating elements? The step geometry permits use alongside other locating and clamping components to create modular fixtures; ensure stable contact and clearance when combining elements. What identifying codes are associated with this item? The item is listed with SKU 5114B and GTIN 4061905090486 for straightforward ordering and inventory control. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
32x47x30mm Step Block Precision Machining Fixture, Hardened Steel - Vertex
Reliable, compact support with consistent reference surfaces and proven Vertex manufacturing quality ensures stable clamping for small and complex set-ups; the compact dimensions (32 x 47 x 30 mm) and traceable SKU 5124B make integration into existing fixturing straightforward — order directly via Metav Werkzeuge or consult our advisors for application advice. Step Block — compact precision clamping accessory by Vertex, 32 x 47 x 30 mm The Step Block is a compact clamping accessory designed to provide stable, repeatable support in machining and fabrication workholding applications. Compact 32 x 47 x 30 mm footprint Accurate reference surfaces for repeatable set-ups Robust design for stable clamping applications Vertex quality, SKU 5124B and traceable documentation Consistent support for repeatable clamping A compact step block delivers a simple but crucial benefit: consistent support for repeatable fixturing. By offering defined contact planes and a controlled profile, this clamping accessory reduces variation between set-ups, which supports reliable machining tolerances and predictable production results. The combination of a stable geometry and a small form factor reduces the number of individual adjustments required during changeovers, helping to shorten setup times and maintain process stability. This is particularly relevant in batch production or when multiple identical fixtures are needed. Small footprint that suits tight workspaces With its compact dimensions of 32 x 47 x 30 mm, the component is intended for applications where space is limited but precision must not be compromised. The small footprint makes it straightforward to place multiple supports in a confined vice or on a fixture plate, enabling flexible height adjustments and multi-point support without encroaching on critical tool paths. The compact design also means easier stacking or nesting in modular clamping systems, allowing straightforward configuration changes while retaining measured support points. Clear documentation and traceability for quality processes Traceability and documentation support quality assurance: the product is supplied with visual references and image documentation, facilitating implementation into inspection records and setup instructions. The presence of a clear SKU (5124B) and a GTIN (4061905091797) assists in inventory control and order accuracy, while available technical imagery aids assembly and verification of orientation during installation. These elements help laboratories, toolrooms and production planners to integrate the component into standard operating procedures, reducing ambiguity and ensuring compliance with internal quality routines. For reliable, space-saving precision in workholding choose Vertex's Step Block (SKU 5124B) — contact Metav Werkzeuge in Emmerich for tailored application guidance or to arrange procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 5124B GTIN: 4061905091797 Dimensions: 32 x 47 x 30 mm eClass: 21170107 Brand: Vertex Key Figures Dimensions: 32 x 47 x 30 mm GTIN: 4061905091797 Special features Compact step block design Technical drawing available (see assets) Detail image available for inspection SKU: 5124B Brand: Vertex FAQ What is the primary purpose of this step block? The step block provides defined support planes for clamping and is intended to stabilise workpieces during machining and fixturing operations; the Step Block from Vertex is designed for repeatable support. What are the exact dimensions of the component? The component measures 32 x 47 x 30 mm and is specified under SKU 5124B for clear identification. Is documentation available to assist with set-up? Yes, technical drawing and detail images are provided to aid correct placement and orientation when integrating the step block into fixtures. How does the component support quality processes? With a traceable SKU (5124B) and GTIN (4061905091797), the part simplifies inventory management and documentation, supporting consistent setup procedures and inspection records. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
32x48mm Coupling M18x2.5mm Thread, 228g - Vertex
Benefit from a precise M18x2.5 mm thread engagement, a compact 32×48 mm footprint and a lightweight 0.228 kg construction that together enable reliable mechanical connections with minimal space impact. Order the coupling directly via Metav Werkzeuge or ask our consultants if needed. 2616M Coupling by Vertex — M18x2.5 mm thread, 32×48 mm compact design A 2616M coupling designed for compact mechanical connections in industrial and workshop equipment, offering precise thread engagement and easy installation. M18x2.5 mm standard thread Compact 32×48 mm footprint Lightweight at 0.228 kg Space-saving design for compact assemblies The compact 32×48 mm format reduces the installation footprint without compromising connection reliability. In applications where clearances are limited, the reduced envelope enables closer component placement and simplified routing. This space-saving characteristic is particularly useful in confined machine housings and assembly stations, where every millimetre counts. The result is improved layout flexibility and fewer modifications to neighbouring components during integration. Precise thread engagement for dependable connections Featuring a standard M18x2.5 mm thread, the coupling provides predictable mechanical mating with matching female fittings. The standardised thread dimension supports straightforward compatibility checks and reduces the need for bespoke adapters. Clear thread engagement ensures secure contact and stable axial alignment, which helps maintain assembly integrity under normal operating conditions and simplifies repeatable installation procedures for production environments. Lightweight construction and documentation for quick installation At 0.228 kg, the coupling is easy to handle during fitting and assembly, reducing operator fatigue and speeding up installation cycles. The low mass also minimises added inertia where moving parts are involved. A technical drawing and detailed images are available to confirm dimensions and mounting orientation, assisting planners and technicians with accurate pre-assembly checks. Combined with reliable supply channels, this supports efficient procurement and on-time integration in production and repair workflows. For compatibility verification or to arrange supply of Vertex 2616M couplings with M18x2.5 mm thread, contact Metav Werkzeuge for tailored advice and secure procurement. Technical data Article number: 2616M GTIN: 4061905093364 Manufacturer: Vertex Core specifications Dimensions: 32x48 mm Thread: M18x2.5 mm Weight: 0.228 kg ECLASS: 21131711 Special features Product type: Coupling Images: main, detail, technical drawing SKU: 2616M FAQ What applications is this coupling suitable for? The coupling is suited to compact mechanical connections in industrial and workshop equipment; the Vertex 2616M coupling is intended where a standard M18x2.5 mm threaded connection and a small footprint are required. Does the thread conform to common standards? Yes, the M18x2.5 mm thread on the 2616M coupling corresponds to the standard metric M18 thread profile, enabling compatibility with matching M18 female fittings. Where can the exact dimensions and mounting details be verified? A technical drawing and detailed images accompany the product, allowing verification of the 32x48 mm dimensions and installation orientation for the Vertex 2616M coupling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
32x48mm Coupling M20x2.5mm Thread, 0.208kg - Vertex
Take advantage of a compact, standardised connection that simplifies fixture integration and reduces assembly time; combine the M20 x 2.5 mm metric thread with a space-saving 32 x 48 mm profile for consistent, repeatable joins. Order the part directly via Metav Werkzeuge or consult our specialists for technical matching. Coupling 2617M by Vertex — M20 x 2.5 mm thread, compact 32 x 48 mm design The Coupling 2617M is a compact mechanical coupling designed for precision workshop and fixture applications, providing a standard metric connection for reliable assembly and straightforward component interchange. Compact 32 x 48 mm construction M20 x 2.5 mm metric threaded connection Lightweight 0.208 kg for easy handling Consistent mechanical performance for precise assemblies The coupling uses a standard M20 x 2.5 mm thread, ensuring compatibility with widely used metric fixtures and housings; this standardisation reduces the need for bespoke adaptors and shortens setup times. By relying on a metric thread, maintenance and replacement become predictable tasks and tool changeovers are minimised, which supports uninterrupted production cycles. The connection geometry provides a secure mating that maintains alignment under typical workshop loads, improving overall assembly precision and repeatability. Space-saving design that simplifies integration With a compact 32 x 48 mm envelope and a 0.208 kg mass, the component is engineered for installations where space and inertia matter. The reduced size allows integration into confined assemblies and retrofits without major layout changes, while the low weight helps lower moving-mass effects in dynamic systems. These attributes benefit both hand-operated jigs and automated fixtures by making handling, positioning and balancing easier, which contributes to faster assembly and less machine adjustment. Traceable quality and straightforward stock handling The item is supplied under the Vertex brand and is identifiable by SKU 2617M and GTIN, enabling clear inventory tracking and procurement control. The standardised specification supports cross-referencing with existing parts lists and CAD models, aiding planners and buyers in verifying fit long before installation. For customers seeking assurance, the measurable parameters simplify acceptance checks: thread size and external dimensions are verifiable on delivery, which reduces the risk of incorrect components entering the workflow. Contact Metav Werkzeuge in Emmerich for a materials suitability check or to arrange prompt delivery from our European stock Technical Data Article number: 2617M GTIN: 4061905093951 ECLASS: 21131711 Facts Dimensions: 32 x 48 mm Thread: M20 x 2.5 mm Weight: 0.208 kg Special features Type: Coupling Manufacturer: Vertex FAQ What is the thread specification of this coupling? The coupling is supplied with a standard M20 x 2.5 mm metric thread suitable for common metric fixtures and connectors. Is the part suitable for compact fixture installations? Yes, the 32 x 48 mm profile and 0.208 kg weight make the coupling suitable for tight assemblies and retrofits where space and low mass are priorities. How can the component be identified for procurement? Refer to SKU 2617M and GTIN 4061905093951 when ordering; these identifiers match the Vertex coupling and aid stock control. Does the coupling require special tools for installation? Installation uses standard tools compatible with metric threads; no specialised equipment is necessary for typical assembly tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
32x53x38mm T-Slot Clamping Pad Set, 4 Pieces - Vertex
Secure clamping with a compact footprint and predictable repeatability, supplied as a set of four for fast modular fixturing; ideal where repeatable positioning and quick rebuilds matter. Order this clamping solution directly via Metav Werkzeuge or consult our advisors for matching the component to specific fixtures. T-slot clamping jaws CK-3714 — compact set of four, Vertex The T-slot clamping jaws are a compact workholding solution designed for use in T-slotted tables and fixtures, offering secure clamping in confined setups. Robust T-slot design for secure clamping Compact dimensions 32x53x38 mm Supplied as set of four for modular setups Reliable Vertex manufacturing Predictable repeatability for production fixtures The compact T-slot clamping elements deliver precision where consistent part location matters. Their geometry ensures repeatable contact points so setups remain stable across multiple cycles, reducing rework and scrap. In practical terms, the jaws clamp directly into standard slot profiles and transfer clamping force with minimal lateral play, which shortens setup time and supports steady throughput in batch runs. The design suits manual and semi-automated workflows, where fixture reliability directly affects productivity. Small footprint that simplifies fixture design With overall dimensions of 32x53x38 mm and a compact form factor, these clamping components free up table space and allow denser fixture layouts. Supplied as a set of four, the configuration supports modular arrangements and makes it easier to create repeatable nests without complex custom tooling. The modest mass—1.5 kg per set—also helps when reconfiguring fixtures frequently, as handling and repositioning are straightforward. This combination of size and modular supply reduces fixture complexity while maintaining secure workholding. Industrial compatibility and dependable sourcing Manufactured by Vertex, the CK-3714 components integrate with common T-slot systems and are supplied as a complete set for consistent use across a fleet of fixtures. The set format streamlines procurement and inventory control while ensuring matching contact geometry across all clamping points, which is particularly beneficial for quality-controlled production. For workshops seeking reliable sourcing, Metav acts as a quality filter for the European market and can advise on matching these clamping jaws to existing table profiles and clamping strategies. Contact Metav Werkzeuge today to discuss how the Vertex CK-3714 T-slot clamping jaws set can streamline fixture design and secure reliable workholding for your production. Technical data Article number: CK-3714 GTIN: 4061905095757 Manufacturer: Vertex Facts Dimensions: 32x53x38 mm Weight: 1.5 kg Items per set: 4 ECLASS: 21022190 Special features Sold as set Product type: T-slot clamping jaws Image file: ck-3718-main.jpg FAQ How are these clamping jaws mounted in a fixture? The T-slot clamping jaws are designed to be inserted into a standard T-slot and secured with the appropriate fastener; the CK-3714 set provides consistent contact geometry for repeatable mounting. Can the Vertex clamping jaws be used in automated stations? Yes, the Vertex CK-3714 clamping jaws are suitable for semi-automated and automated setups where standard T-slot workholding is required. Are the jaws supplied as a complete set for multi-point clamping? The product is supplied as a set of four, which supports multi-point and modular clamping arrangements without the need to match individual components. What size are the clamping jaws and how do they affect fixture layout? The compact dimensions of 32x53x38 mm reduce the fixture footprint and allow denser placement of clamping points for efficient use of table space. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
32x97x59mm Step Block Precision Machining Fixture, Hardened Steel - Vertex
Combining compact dimensions with consistent step geometry and proven clamping application logic enables accurate, repeatable workpiece positioning in constrained setups; rely on a small footprint and industry-standard classification for straightforward integration. Order the Step Block directly via Metav Werkzeuge or ask our consultants if needed. Step Block — compact clamping accessory, 32 x 97 x 59 mm | Vertex The Step Block is a compact clamping accessory designed for precise workpiece elevation and repeatable positioning within machine-shop and fixture setups. Small footprint 32 x 97 x 59 mm Repeatable step geometry for consistent positioning Compatible with standard clamping setups Classified for industrial use (ECLASS 21170107) Space-efficient design for constrained workstations The compact dimensions 32 x 97 x 59 mm deliver a clear benefit where bench and fixture space is limited: a reduced footprint means multiple blocks can be arranged without impeding access to the clamping area. In practice, the small size supports denser fixturing layouts while maintaining stable support for diverse setups. The dimension values are metric and can be used directly in nesting and fixture-planning documentation. Consistent positioning that improves throughput A clearly defined step geometry provides repeatability in elevation and alignment, reducing cycle time caused by manual height adjustments. When integrated into a clamping workflow, the block contributes to process stability by enabling the same reference height across successive operations. This leads to fewer adjustments, lower rework rates and improved overall machining throughput when used as part of a systematic fixturing approach. Practical integration into clamping systems The component is intended for use in clamping technology and can be combined with standard clamps and supports to form modular fixtures. Classification under ECLASS 21170107 facilitates parts management and procurement in industrial environments. The design suits mixed production contexts where compact, reliable elevation elements are required for repeatable assembly or machining tasks. For specification advice, availability in Europe and tailored supply from our Emmerich warehouse, contact Metav Werkzeuge — enquiries by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 are welcome. Technical Data SKU: 5134B GTIN: 4061905091575 Dimensions: 32 x 97 x 59 mm ECLASS: 21170107 Brand: Vertex Facts Metric dimensions: 32 x 97 x 59 mm ECLASS code: 21170107 GTIN numeric identifier: 4061905091575 Special features Compact step geometry Intended for clamping technology applications Industrial classification for parts management FAQ What is the primary purpose of this block? The Step Block by Vertex serves as a compact elevation and positioning element in clamping systems, enabling repeatable workpiece placement. Which dimensions should be used for fixture planning? Fixture plans should reference the block dimensions: 32 x 97 x 59 mm; these metric values are provided for accurate layout and nesting. Is the Step Block suitable for modular clamping setups? Yes, the component is intended for integration into standard clamping setups and can be combined with clamps and supports to form modular fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
32–41mm Hollow Spindle Stop Rear-Inserted Expandable Chuck, Adjustable Grip - TECWERK
Secure, rear-mounted spindle stop that clamps radially to the inner wall of hollow spindles for vibration-free tool holding; length is adjustable and released with a special key. Benefit from fast fits and repeatable positioning to keep setups efficient and machining consistent. Order via Metav Werkzeuge or consult our specialists for application advice. Hollow spindle stop for spindle Ø 32–41 mm — rear-insert, adjustable clamping The Hollow spindle stop for spindle Ø 32–41 mm is a rear-mounted clamping device for hollow spindles that secures tooling by radial jaw pressure and allows axial repositioning using a special key. Rear insertion for easy fitting Radial jaw clamping for secure seating Adjustable length with special key Precision clamping for stable machining The device provides radial jaw clamping that is driven by a clamping screw, pressing the jaws uniformly against the inner wall of the hollow spindle. This mechanism minimises run-out and reduces vibration, delivering a secure seating that supports consistent machining tolerances. For shops handling repetitive turning or milling setups, the resulting increase in stability translates into fewer rejects and less rework, which improves process reliability. Fast installation and simple length adjustment Designed for rear insertion, the stop is inserted into the hollow spindle and tightened with a special key. Tightening the clamp locks the unit in place; releasing the key allows smooth axial movement for fine positional adjustment. This workflow shortens setup times and provides repeatable positioning without the need for complex fixtures. The combination of quick fitting and tool-free axial fine-tuning supports efficient changeovers in busy workshops. Robust design built for everyday workshop use Constructed for clamping tasks in standard hollow spindles with diameters between Ø 32–41 mm, the stop is suitable for general workshop environments and industrial applications where reliable holding power is required. The straightforward mechanical design minimises maintenance requirements and avoids unnecessary complexity, ensuring long service intervals and dependable performance under frequent use. The use of a dedicated tightening tool guarantees consistent torque and repeatable clamping force. For reliable, adjustable clamping choose the TECWERK hollow spindle stop and contact Metav Werkzeuge for product guidance or to discuss compatibility with current machinery — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data Article number: 4000832503NW Name: Hollow spindle stop for spindle Ø 32–41 mm (Hohlspindelanschlag) Packaging unit: 1 Facts Spindle diameter: Ø 32–41 mm Special features Rear insertion into the hollow spindle Tightened and released with a special key Radial jaw clamping that presses against the inner wall Axial length adjustment while inserted FAQ How is the stop secured inside the hollow spindle? The TECWERK hollow spindle stop is tightened with a clamping screw using the supplied special key; the screw forces the radial jaws against the inner wall to ensure a secure fit. Can the stop be repositioned without removing it from the spindle? Yes. Releasing the special key frees the jaws and allows axial repositioning, so the stop can be shifted in length while remaining inserted. What spindle diameters does this stop support? The device fits hollow spindles with inner diameters of Ø 32–41 mm, providing consistent clamping across that range. Is the clamping mechanism repeatable for multiple setups? The mechanical jaw system with key-operated tightening offers repeatable clamping and positioning suitable for serial setups and frequent tool changes. Which applications are best suited to this type of stop? This hollow spindle stop is appropriate for workshop and industrial clamping tasks where secure, low-runout holding is required for turning, milling or other machining operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
33-37.5mm Closure Clamp Horizontal Base With Spring, 150N Press / 225N Hold, Stainless Steel - Kukamet
Take advantage of the combination of reliable clamping performance, corrosion-resistant construction and quick engagement for consistent fixture operation; order the clamp directly via Metav Werkzeuge or consult the specialists for application advice. 311 toggle latch clamp — stainless steel, spring-loaded hook for horizontal-foot mounting The 311 toggle latch clamp is a stainless steel, spring-loaded closure clamp designed for fixture and jig applications where a compact, positive-engagement latch is required. Spring-loaded hook for positive engagement Stainless steel construction for corrosion resistance 150 N clamping force, 225 N holding capacity Horizontal-foot mounting for fixture integration Consistent clamping performance that supports production flow Built for repeatable operation, the 311 delivers a defined 150 N clamping force with a 225 N holding capacity, separating the act of clamping from static retention. Clamping force refers to the instantaneous force applied when the latch is engaged, while holding capacity indicates the maximum load the engaged hook can resist without displacement. This distinction matters for fixture design: choosing a latch with the right clamping and holding values reduces rework, shortens set‑up times and ensures reliable part location under process loads. Compact design for easy installation and seamless integration The latch features a low mass of 0.18 kg and a compact arm range of 33–37.5 mm, allowing installation on space-constrained jigs. The horizontal-foot mounting format simplifies attachment to flat bases; the threaded connection with a 45 mm thread length permits fine adjustment of hook position. Made from stainless steel, the component combines dimensional stability with corrosion resistance, making it suitable for workshop and light industrial environments where exposure to coolant or humidity is possible. Rapid operation and maintenance-friendly construction A spring-loaded mechanism ensures immediate hook engagement and compensates for small tolerance variations, so the closure is both fast and forgiving during repetitive cycles. The integrated hook secures the workpiece positively, and the robust stainless construction keeps servicing needs low. For production settings requiring frequent opening and closing, the latch’s combination of quick action and durable materials reduces downtime and contributes to predictable maintenance schedules. Contact Metav Werkzeuge for specialist advice and fast supply of the Kukamet 311 toggle latch clamp (SKU S311-2-Y); call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S311-2-Y GTIN: 8682843523292 Material: Stainless steel Weight: 0.18 kg Core specifications Arm range: 33–37.5 mm Maximum clamping force: 150 N Maximum holding force: 225 N Thread length: 45 mm Mounting: horizontal foot Special features Spring-loaded design With hook eClass: 21041718 ETIM: EC011973 FAQ What applications is this latch suited for? The Kukamet 311 toggle latch clamp is designed for fixture and jig work, production tooling and any application requiring a compact, repeatable closure with moderate clamping and holding forces. How is the latch mounted and adjusted? Mounting is by a horizontal foot; positional adjustment is achieved via the threaded connection (45 mm thread length) to align the hook accurately in the fixture. What level of force can be expected from this component? The latch provides a clamping force of 150 N and a holding capacity of 225 N, values stated for the Kukamet 311 (SKU S311-2-Y). Is the latch suitable for corrosive environments? Constructed from stainless steel, the latch offers enhanced resistance to corrosion compared with standard steels, improving longevity in humid or mildly corrosive workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3300N Vertical Clamp 3000N Thrust, Zinc-Plated, Horizontal Foot - Kukamet
Take advantage of the combination of dependable holding force, corrosion-resistant construction and compact design for secure and repeatable fixturing. Order the clamp directly via Metav Werkzeuge or consult our team for application-specific advice. Vertical toggle clamp 211 – 3,000 N clamping force, galvanized (Kukamet) A Vertical toggle clamp 211 engineered for secure, repeatable workpiece retention in jigs, fixtures and assembly setups, featuring a horizontal base mount for stable attachment. Maximum 3,000 N clamping force Galvanized steel body for corrosion resistance M10×70 pressure spindle for precise contact Horizontal-foot mounting for stable fixture attachment Consistent holding power that keeps production moving The Vertical toggle clamp 211 delivers a maximum 3,000 N clamping force and a holding force of 3,300 N, ensuring components remain stationary during machining, assembly or welding. The marked difference between clamping and holding force provides a safety margin for dynamic loads, reducing the risk of slippage and rework. For technicians and production planners, this means fewer interruptions and a more predictable cycle time, with the robust construction contributing to long-term operational reliability. Quick set-up and fine adjustment for precise fixtures Fitted with a M10×70 pressure spindle, the device allows fine contact adjustment to accommodate variable workpiece heights and surface irregularities. The horizontal base mounting simplifies alignment in existing fixtures and enables straightforward positioning on flat mounting plates. The toggle action offers rapid engagement and release, supporting both repetitive operations and occasional adjustments while maintaining repeatability across multiple clamping cycles. Durable materials for demanding shop environments Manufactured from galvanized steel, the clamp resists corrosion in humid or workshop environments, extending service life and reducing maintenance intervals. With a compact mass of 0.9 kg, the component integrates easily into modular jigs without adding unnecessary bulk. The combination of compact form factor, corrosion protection and clear mechanical limits makes this clamp suitable where space is constrained but reliable retention is essential. Contact Metav Werkzeuge for a tailored recommendation and prompt supply from Emmerich, and request further technical information or a quotation specific to the intended application Technical data Article number: 211-4 GTIN: 8680731500240 Brand: Kukamet Weight: 0.9 kg Material: galvanized Mounting: horizontal foot Pressure spindle: M10×70 eClass: 21041717 ETIM: EC011973 Facts Clamping force (max): 3,000 N Holding force (max): 3,300 N Special features Vertical toggle action Corrosion-resistant finish Compact design for fixtures Category: Clamp FAQ What is the maximum clamping capacity of this clamp? The clamp provides a maximum clamping force of 3,000 N, with a holding force up to 3,300 N, suitable for robust retention in many fixture applications. How is the clamp adjusted to different workpiece heights? Adjustment is achieved via the M10×70 pressure spindle, allowing precise contact height setting to match varying workpiece surfaces. Can this clamp be mounted to standard plate fixtures? Yes. The horizontal-foot mounting is designed for stable attachment to flat mounting plates and common fixture bases. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
330mm Vertical Clamp With Angle Base, Massive Holding Arm, 3.3kN Hold Force, Zinc-Plated - Kukamet
Combine the galvanised finish with a massive 141 mm arm and up to 3,300 N holding force to secure fixtures reliably; the result is a durable clamp that supports steady production flows. Order the vertical clamp directly via Metav Werkzeuge or ask Metav’s consultants for selection guidance. Vertical clamp 213 by Kukamet — galvanised, 3,300 N holding force Vertical clamp 213 is a compact vertical clamping device for workshop fixtures and jigs, designed for reliable holding with an angle-foot mounting and a robust galvanised finish. Robust galvanised construction Massive 141 mm holding arm Holding force up to 3,300 N Angle-foot mounting for stability Dependable clamping performance for repeatable production The galvanised construction ensures corrosion resistance and long service life, while the combination of 3,300 N holding force and 3,000 N pressing force provides clear, repeatable clamping results under cyclic operation. The massive arm design reduces elastic deformation during engagement, which maintains positional accuracy in fixtures and reduces rework. Where a defined clamping force is required, the separation of pressing and holding values allows planners to size actuators and safety elements precisely, improving process reliability and reducing downtime. Quick fitting and secure fixture integration Designed for fast mounting, the angle-foot base provides a low-profile, stable attachment to plates and jigs, helping to keep setups compact and rigid. With a measured mass of 0.972 kg and a 141 mm arm reach, the clamp is balanced for manual handling without compromising robustness. The galvanised coating minimises surface maintenance and supports use in machine environments where lubrication or light coolant is present. For workshop planners, the compact footprint facilitates integration into modular fixtures and reduces the need for extensive rework of existing tooling. Versatile use in jig and fixture applications The vertical orientation and lever-style actuation make this clamp suitable for a wide range of holding tasks in production and assembly fixtures, where vertical retention and quick release are needed. The solid holding characteristics contribute to shorter cycle times by eliminating micro-movements during machining or assembly. For customers requiring clarification on fixture design or force specification, Metav’s technical team can provide application support and advise on suitable mounting arrangements and complementary components to achieve optimal performance. For precise fixture solutions and rapid supply from Emmerich, request a technical quote from Metav Werkzeuge—Metav’s specialists are available to advise on compatibility and delivery times. Technical data Article number: 213-4-D-C2 GTIN: 8680731502046 Material: galvanised Mounting: angle foot Weight: 0.972 kg Arm length: 141 mm Max pressing force: 3,000 N Max holding force: 3,300 N Facts SKU: 213-4-D-C2 eClass: 21041717 ETIM: EC011973 Weight (kg): 0.972 Arm (mm): 141 Druckkraft max (N): 3000 Haltekraft max (N): 3300 Special features Massive holding arm Galvanised finish Angle-foot mounting Lever-clamp style (hebelspanner) Category: Clamps FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 3,300 N; the specification for the Vertical clamp 213 indicates a pressing capacity of 3,000 N and a holding capacity of 3,300 N. How is the clamp mounted to a fixture plate? Mounting is via an angle foot that secures the device with a low profile; the design of the angle-foot base supports stable attachment in jigs and fixtures. Is the surface protected against corrosion? Yes, the unit is galvanised, offering corrosion resistance suitable for many workshop environments and reducing routine surface maintenance. What is the arm reach and how does it affect fixture design? The arm reach is 141 mm; this length provides leverage for secure clamping while allowing compact fixture layouts and predictable clamping geometry. Which SKU should be referenced when ordering or enquiring? Reference SKU 213-4-D-C2 when ordering or requesting technical details for the Vertical clamp 213 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
330x320x40mm Base Plate for Vertex VHO Vices - Vertex
Take advantage of a robust mounting solution and precise alignment for Vertex VHO vices: the substantial mass and compact footprint keep clamped workpieces steady and reduce vibration for reliable machining. Order the base directly via Metav Werkzeuge or consult our specialists for application advice. HSO-6 Base for Vertex VHO Vices — 330 x 320 x 40 mm, 16.5 kg The HSO-6 is a dedicated base plate designed to secure Vertex VHO vices, providing a firm, low-profile foundation for workshop and production use. Precision base for Vertex VHO vices Solid construction for stable clamping Dimensions: 330 x 320 x 40 mm Mass 16.5 kg for vibration damping Greater machining accuracy through steady support A firm datum is essential for repeatable results; the HSO-6 base provides precise alignment for Vertex VHO vices so that setups remain consistent across batches. The defined footprint of 330 x 320 x 40 mm simplifies positioning on machine tables and assembly benches, while the 16.5 kg mass contributes to reduced vibration during cutting or finishing operations. This stability translates into fewer rejects and lower rework rates, improving process reliability in both small workshops and industrial cells. Faster set-ups and more reliable production flow By offering a stable, pre‑defined mounting surface, the base minimises time spent on clamping adjustments and alignment checks. The engineered interface to the VHO series ensures repeatable vice seating, which shortens changeover times and supports lean manufacturing practices. For production environments where throughput and consistency matter, the combination of a compact footprint and secure mounting reduces downtime and helps maintain cycle-time targets without compromising quality. Durable design for everyday workshop demands Constructed for everyday industrial use, the base is intended to withstand regular handling and frequent re‑clamping while keeping vice geometry intact. Compatibility with the Vertex VHO series ensures straightforward integration into existing fixtures and tooling layouts. The low-profile design supports accessibility around the clamped part, improving tool approach angles and operator ergonomics, thereby supporting safer and more efficient machining operations. Contact Metav Werkzeuge in Emmerich for tailored advice on selecting the HSO-6 base for secure precision clamping — email info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Data SKU: HSO-6 GTIN: 4061905087165 Item: Base for Vertex VHO vices ECLASS: 21029106 Core technical data Dimensions: 330 x 320 x 40 mm Weight: 16.5 kg Special features Compatible with Vertex VHO series Low-profile mounting surface Designed to reduce vibration during machining FAQ What is the primary purpose of this base? The HSO-6 base is designed as a stable mounting plate for Vertex VHO vices, improving alignment and reducing vibration for more consistent machining results. Which vices are compatible with the base? Compatibility is with the Vertex VHO vices; the HSO-6 is made to seat these vices securely and repeatably. How does the mass of the base affect machining? The 16.5 kg mass of the base increases stability and helps to dampen vibrations, supporting better surface finish and dimensional accuracy when the vice is under load. Can the base be used on any machine table? The base’s 330 x 320 x 40 mm footprint is suitable for many tables and benches; ensure the table area can accommodate the dimensions and that mounting holes match the intended clamping method. Is the HSO-6 suitable for production environments? Yes, the HSO-6 is intended for regular workshop and production use, offering repeatable seating for Vertex VHO vices to support efficient machining workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
335x310x40mm Base For Vertex VHT Vises - Vertex
Combine the 10 kg mass, a compact 335 x 310 x 40 mm footprint and dedicated compatibility with Vertex VHT vises to secure stable clamping and reduce vibration during machining; order the Base via Metav Werkzeuge or consult our specialists for fitment advice. Base HS-6 for Vertex VHT vises — sturdy 10 kg support, 335 x 310 x 40 mm The Base HS-6 is a compact mounting plate designed for use with Vertex VHT vises, providing a stable platform for workshop clamping and machining operations. Solid 10 kg construction for stable clamping Designed for Vertex VHT vises compatibility Compact footprint 335 x 310 x 40 mm Improved machining accuracy through heavier support The substantial 10 kg mass of the plate acts as a passive damper, delivering reduced vibration during cutting and grinding operations. This increased mass helps keep the workpiece steady, which in turn improves surface finish and repeatability. For operations where tool chatter or micro-movements can compromise tolerances, the heavier support reduces the need for repeated rework and contributes to a smoother production flow, providing a clear efficiency gain on the shop floor. Save bench space with a compact mounting solution With overall dimensions of 335 x 310 x 40 mm, the plate offers a compact footprint that frees up valuable bench area without sacrificing stability. The shallow profile enables integration into existing workstations or fixture tables while keeping the clamping height low, simplifying access for assembly and inspection tasks. Where shop layouts are constrained, this space-efficient support allows for flexible equipment arrangement and easier handling of larger vises or assemblies. Compatibility and practicality for everyday workshop use Designed specifically for use with Vertex VHT vises, this mounting plate streamlines setup by matching common vise interfaces and alignment practices. The robust construction supports faster fixturing and quick alignment, reducing time spent on preparatory steps and improving overall throughput. Sourcing such components through a trusted supplier helps maintain consistency across workstations and supports reliable supply for ongoing production needs. For reliable clamping solutions compatible with Vertex equipment, contact Metav Werkzeuge for personalised advice and secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: HS-6 GTIN: 4061905093005 Designation: Base Compatibility: for Vertex VHT vises Dimensions: 335 x 310 x 40 mm Weight: 10 kg ECLASS: 21029106 Facts Weight: 10 kg Dimensions: 335 x 310 x 40 mm ECLASS code: 21029106 Special features Compatibility with Vertex VHT vises Compact, low-profile design Gallery images available FAQ Is the plate compatible with Vertex VHT vises? Yes. The Base HS-6 is specified for use with Vertex VHT vises and fits the common mounting arrangements for that series. What are the exact external dimensions of the support plate? The plate measures 335 x 310 x 40 mm and is designed for a low-profile mounting that saves bench space. What is the weight and how does it affect machining? The plate weighs 10 kg; the added mass reduces vibration and helps to stabilise workpieces during machining, improving surface finish and repeatability. Is the material specified for the plate? Material information is not provided in the product data; the specification focuses on dimensions, weight and compatibility. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
33–37.5mm 311 Clamping Toggle With Spring, Horizontal Foot, 150N Thrust – Kukamet
Compact, spring‑loaded clamping and a horizontal mounting foot deliver secure, repeatable closure with a small footprint; the latch’s holding force of 225 N and included hook make it suitable for jigs and light fixtures. Order directly via Metav Werkzeuge or consult our specialists for application advice. Latch clamp 311 by Kukamet — spring‑loaded lever latch with horizontal base The Latch clamp 311 is a spring‑loaded lever latch designed for secure closure and repeatable positioning in jigs, fixtures and small assembly applications. Spring-loaded lever for reliable engagement Horizontal base for easy panel mounting Holding force up to 225 N ensures secure clamping Blackened finish for corrosion resistance Fast, repeatable closure that keeps production moving The spring‑loaded lever mechanism provides a consistent catch and quick action, reducing cycle time at assembly stations. The combination of a spring‑loaded engagement and a positive hook closure means the clamp returns to a ready position automatically after each release, which supports high throughput and lowers the risk of mis‑seating. For bench and fixture work, this translates into fewer manual checks and faster handling of repeat assemblies. Space-saving mounting with a horizontal base Fitted with a horizontal base, the latch is intended for panel or flange mounting where vertical space is limited. The compact arm (33–37.5 mm) allows close‑set positioning and the short installation depth preserves valuable workspace on fixtures. A moderate mass of 0.18 kg keeps the overall fixture weight low while maintaining mechanical stability during operation. Secure forces and clear technical advantages Two force values describe performance: the pressing force of 150 N indicates the clamping action applied when closing down, while the holding force of 225 N specifies the maximum retention capacity once latched. These figures give a measurable basis for selecting the clamp where predictable mechanical retention is required. The thread length 45 mm enables secure attachment and adjustment when integrating into bespoke fixtures or welded plates. Robust finish and simple integration for production use A blackened finish provides a degree of corrosion resistance and a professional appearance appropriate for workshop and industrial environments. The latch includes a hook for positive engagement and is manufactured with tried‑and‑tested mechanical geometry for long‑term repeatability. Where low maintenance and high reliability are priorities, this type of lever latch offers a straightforward solution that integrates easily into standard clamping layouts. For secure, repeatable fixtures choose the Kukamet latch clamp 311 — contact Metav Werkzeuge for technical guidance or to discuss suitable mounting options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: B311-2-Y GTIN: 4061905079122 SKU: B311-2-Y Facts Weight: 0.18 kg Arm: 33–37.5 mm Max pressing force: 150 N Max holding force: 225 N Thread length: 45 mm eClass: 21041718 ETIM: EC011973 Special features Horizontal base for panel mounting Spring‑loaded mechanism Includes hook for positive closure Blackened finish (Schwarz brüniert) Category: Clamps (Spanner) FAQ What is the difference between pressing force and holding force? Pressing force refers to the clamping action when engaging the latch; holding force (225 N for the latch clamp 311) is the maximum retention capacity once the hook is engaged. Can the latch be mounted on flat panels? Yes. The horizontal base is intended for panel or flange mounting and supports straightforward integration into fixtures and jigs. Is the clamp suitable for repetitive industrial use? The spring‑loaded mechanism and positive hook engagement give the Kukamet latch clamp 311 the repeatability and retention needed for light industrial and assembly tasks. What dimensions matter when planning installation? Key installation dimensions include the arm length (33–37.5 mm) and the thread length (45 mm) for secure fastening into the mounting plate or fixture. Does the latch have corrosion protection? The clamp features a blackened finish that offers improved surface resistance suitable for workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33–37.5mm Closure Clamp With Spring, Horizontal Foot, 150N Thrust, Galvanised - Kukamet
Benefit from a compact, spring-loaded latch clamp that combines zinc-plated durability with a holding force of 225 N and a clamping force of 150 N for reliable securing in fixtures and jigs. Order the clamp directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. 311 Verschlussspanner — spring-loaded latch clamp with hook and horizontal foot (Kukamet) The 311 Verschlussspanner is a compact, spring-assisted latch clamp engineered for quick, repeatable securing on assembly fixtures, jigs and small production tooling using a horizontal foot mounting. Spring-loaded action for repeatable clamping Horizontal foot for flush fixture mounting Zinc-plated finish for corrosion protection Holding force 225 N, clamping force 150 N Consistent clamping performance for small fixtures The spring-loaded design delivers consistent repeatability and controlled contact pressure, making the clamp suitable for applications that require fast manual actuation and reliable part retention. The distinction between clamping force (150 N) and holding force (225 N) means the device provides a measured closing pressure while maintaining a higher static retention capacity once engaged. The compact format keeps the overall footprint low, supporting denser fixture layouts without compromising accessibility to the workpiece. Robust mounting and corrosion resistance for workshop use The horizontal foot mounting enables a flush attachment to plates and tooling blocks, simplifying integration into existing jigs. Constructed with a zinc-plated finish, the unit offers basic corrosion protection appropriate for workshop environments and periodic cleaning. The hook-equipped latch and the spring mechanism combine to provide quick engagement and secure closure, reducing setup times and making it easier to maintain consistent clamping cycles on repetitive tasks. Simple assembly and specification details for planners Installation is straightforward: the specified thread length 45 mm supports secure bolting into a fixture while the low weight (0.18 kg) minimises added load on moving subassemblies. The compact lever geometry and spring assistance reduce operator effort during actuation, supporting faster cycle times on small-batch production or repair benches. For spec sheets and BOMs, the SKU and GTIN provide unambiguous identification for procurement and inventory control. For technical clarification, stock checks or application advice for the Kukamet 311 latch clamp, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants can advise on mounting and integration options. Technical Data Article number: 311-2-Y GTIN: 8682843523797 Manufacturer: Kukamet Facts Arm: 33–37.5 mm Clamping force max: 150 N Holding force max: 225 N Thread length: 45 mm Weight: 0.18 kg Special features Zinc-plated material Horizontal foot mounting Spring-loaded action With hook FAQ What applications is this latch clamp intended for? The 311 Verschlussspanner (Kukamet, SKU 311-2-Y) is designed for securing parts on fixtures, jigs and assembly tooling where quick manual clamping and reliable retention are required. How is the clamp mounted to a fixture? Mounting is via the horizontal foot; the specified thread length of 45 mm supports secure bolting into a fixture plate or tooling block. What do the force ratings indicate? The device provides a clamping force of 150 N during actuation and a holding force of 225 N when engaged, indicating measured closing pressure and higher static retention respectively. Is the clamp suitable for use in workshop environments? Yes; the zinc-plated finish offers basic corrosion protection suitable for typical workshop conditions, while the spring-loaded mechanism ensures repeatable operation. What are the physical dimensions relevant to integration? Key integration details include the arm range of 33–37.5 mm, the 45 mm thread length for fastening and the compact weight of 0.18 kg for lightweight assemblies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33–37.5mm Toggle Clamp Horizontal Base With Spring And Safety Latch, 150N Thrust – Kukamet
Block the routine: compact clamping and reliable locking made accessible. The combination of a spring-loaded safety lock, a horizontal-foot mounting and a proven holding force of up to 225 N ensures secure fixture retention with minimal setup time. Order the clamp directly via Metav Werkzeuge or contact their advisers for specification support. 311 Toggle Latch Clamp – Horizontal-foot, spring-loaded latch clamp with safety lock (Kukamet) The 311 Toggle Latch Clamp is a compact closure clamp designed for routine fixture securing and panel retention in workshops and light industrial settings, combining a spring-actuated hook with a horizontal mounting foot for low-profile installation. Spring-loaded with safety lock Horizontal mounting foot Holding force up to 225 N Blackened (blued) surface finish Secure holding even in repeated cycles A finely balanced toggle mechanism provides a consistent holding force while the integrated spring maintains engagement under vibration. The design translates the operator’s lever action into stable clamp pressure, reducing the need for frequent retightening and supporting repeatable assembly processes. The result is a compact, lightweight clamp that supports reliable part positioning without compromising throughput. Safety-oriented actuation for daily workshop use The clamp’s safety lock prevents unintended release during handling and transport, adding a passive protection layer that is particularly valuable when fixtures are moved or exposed to shocks. The spring-assisted hook ensures the latch returns to a pre-tensioned state, so the closure remains engaged until deliberately released. These measures combine to lower the risk of accidental openings and maintain operational continuity on the shop floor. Practical mounting and material benefits Fitted with a horizontal foot for simple installation on flat surfaces, the clamp accepts a projected hook and 45 mm thread length for adjustable engagement. The blackened (blued) finish gives the component a uniform appearance and basic surface protection while keeping maintenance straightforward. The compact arm length range enables use in confined assemblies where space is at a premium, and the presence of a hook element facilitates rapid engagement with mating components. Discuss specification and suitability with Metav Werkzeuge to confirm that the Kukamet clamp fits the application and workshop requirements; Metav’s consultants are available to advise on integration and supply logistics. Technical data Article number: B311-2-Y-L GTIN: 4061905080135 SKU: B311-2-Y-L Brand: Kukamet Weight: 0.18 kg Facts Arm range: 33–37.5 mm Thread length: 45 mm Maximum pressing force: 150 N Maximum holding force: 225 N eClass: 21041718 ETIM: EC011973 Special features Horizontal mounting foot With spring and safety lock With hook Blackened (blued) finish Category: Clamps / Toggle latch clamp FAQ What materials can this clamp be mounted to? The clamp is supplied with a horizontal foot for bolting to flat steel or aluminium plates; compatibility depends on the intended mounting method and substrate strength. How much force does the latch provide? The Kukamet 311 latch clamp offers a maximum pressing force of 150 N and a maximum holding force of 225 N, suitable for light to medium retention tasks. Is the clamp adjustable for different engagement distances? Yes; the device includes a 45 mm thread length on the hook allowing for fine adjustment of the engagement point and clamping gap. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33–37.5mm Toggle Clamp Horizontal Base, Spring Loaded With Safety Lock, 150N Push / 225N Hold, Stainless Steel - Kukamet
Take advantage of a compact, corrosion‑resistant closure that combines a stainless steel body with a reliable spring‑loaded safety lock and a horizontal mounting style for secure panel fixation. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet S311-2-Y-L closure toggle clamp — stainless steel, horizontal foot, spring‑lock The Kukamet S311-2-Y-L closure toggle clamp is designed for secure, repeatable fastening of panels and covers in industrial assemblies, offering a compact hook and adjustable arm for flexible installation. Stainless steel construction for corrosion resistance Horizontal foot for stable panel mounting Spring-loaded safety lock for secure closure Adjustable arm 33–37.5 mm with hook Secure clamping with measurable performance The clamp delivers defined holding and clamping behaviour thanks to its clear specifications: 150 N clamping force and 225 N holding force, values that support predictable fixture performance in repetitive production tasks. The horizontal‑foot mounting reduces lever‑induced movement on panel surfaces and simplifies alignment during assembly. Designed for use where reproducible force and space‑efficient fastening matter, this component supports faster fixture set‑up and reduces rejects caused by inconsistent clamping. Robust material and safety mechanisms for long service life Constructed from stainless steel, the unit resists corrosion in demanding environments and needs minimal upkeep, which lowers life‑cycle costs for workshop and production settings. The integrated spring‑loaded safety lock prevents accidental release, while the hook and adjustable arm (33–37.5 mm) allow secure engagement on a range of mating parts. These features combine to give a dependable mechanical lock that maintains position under vibration and frequent operation, improving operator confidence and process stability. Fast installation and versatile application for busy workshops With a compact footprint and a lightweight 0.18 kg body, the clamp fits into confined assemblies without adding unnecessary mass. The horizontal foot simplifies panel mounting and can be fixed using the provided thread length of 45 mm for reliable screw engagement. The product is supplied under SKU S311-2-Y-L and suits jigs, access doors, inspection covers and small‑parts fixtures where a robust yet compact closure is required. Its simple kinematics make it suitable for manual actuation or integration into semi‑automated production lines. Contact Metav Werkzeuge for tailored advice on the Kukamet S311-2-Y-L closure toggle clamp — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment, request technical drawings or arrange priority shipment from Emmerich Technical data SKU: S311-2-Y-L GTIN: 8682843523506 Material: Stainless steel Mounting: Horizontal foot Arm range: 33–37.5 mm Thread length: 45 mm Max clamping force: 150 N Max holding force: 225 N Weight: 0.18 kg Special feature: With spring and safety lock With hook: Yes eCl@ss: 21041718 ETIM: EC011973 Facts Weight: 0.18 kg Arm range: 33–37.5 mm Thread length: 45 mm Max clamping force: 150 N Max holding force: 225 N GTIN: 8682843523506 Special features Stainless steel construction Horizontal foot mounting Spring-loaded safety lock Hook for secure engagement Compact, low-mass design FAQ What materials is this clamp suitable for? The Kukamet S311-2-Y-L closure toggle clamp has a stainless steel construction that suits use on metal panels and in humid or mildly corrosive environments. How is the clamp mounted to a panel? Mounting is by a horizontal foot arrangement; the component accepts a 45 mm thread length for secure screw fixation. What forces can be expected from the clamp? Rated values are a 150 N clamping force and a 225 N holding force, which provide consistent performance for light to medium fastening tasks. Is there a safety mechanism to prevent accidental opening? Yes, the unit features a spring‑loaded safety lock that secures the latch in the closed position until intentionally released. Can the clamp engage different panel thicknesses or offsets? The adjustable arm (33–37.5 mm) and hook allow adaptation to varying engagement depths and offsets for flexible use in fixtures and access covers. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33–37.5mm Toggle Clamp Horizontal Foot With Spring Safety Lock, 150N Push, Zinc Plated - Kukamet
Combine galvanised construction, a spring-loaded safety lock and a 225 N holding force to secure light-duty assemblies reliably; order the latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. Latch Clamp 311 by Kukamet — galvanised, horizontal base Latch Clamp 311 for secure, repeatable part retention in light-duty fixtures and assembly jigs. Galvanised corrosion protection Includes spring-loaded safety lock Horizontal base for stable mounting Adjustable arm 33–37.5 mm Secure clamping for small fixtures and jigs The galvanised construction delivers durable surface protection, making the clamp suitable for standard workshop environments where corrosion resistance matters. Fitted with a spring-loaded safety lock, the device maintains a positive latch under vibration and movement, reducing the risk of unintended release. The combination of a compact design and a 225 N holding force provides dependable restraint for small components during assembly, testing or light machining operations. Compact performance with simple mounting and adjustment Designed for straightforward integration, the clamp is supplied with a horizontal base that permits direct bolting to flat fixture plates. The adjustable arm (33–37.5 mm) and 45 mm thread length permit fine positional setting, while a net weight of 0.18 kg keeps the unit unobtrusive on delicate jigs. A rated pressing force of 150 N ensures sufficient engagement without overloading lightweight assemblies, enabling faster cycle times and consistent part repeatability. Built-in safety and practical features for daily use A mechanical safety lock, combined with the spring mechanism, gives tactile and visual indication of secure engagement and prevents accidental opening during handling. The integrated hook adds a simple retention option for latch positioning. Galvanised surface finishing reduces maintenance needs and extends service life under normal workshop conditions, supporting reliable operation across recurring production runs. Contact Metav Werkzeuge for tailored fixture advice and to arrange technical specification details for the Kukamet latch clamp 311 (SKU 311-2-Y-L) Technical data SKU: 311-2-Y-L GTIN: 8682843523841 Manufacturer: Kukamet Weight: 0.18 kg Material: Galvanised Core figures Arm range: 33–37.5 mm Max pressing force: 150 N Max holding force: 225 N Thread length: 45 mm eClass: 21041718 ETIM: EC011973 Special features Horizontal base mounting With spring and safety lock With hook Category: Spanner FAQ What applications suit this latch clamp best? The Kukamet latch clamp 311 (latch clamp, SKU 311-2-Y-L) is intended for light-duty fixtures, assembly jigs and small production or test benches where a compact, secure retention device is required. How is the clamp mounted and adjusted? Mounting is via the horizontal base; the clamp can be bolted to flat plates. Adjustable arm range 33–37.5 mm and 45 mm thread length enable positional fine-tuning. What holding and pressing forces are provided? Rated values are a pressing force of 150 N and a holding force of 225 N, suitable for securing small components without excessive stress on the fixture. Does the clamp lock securely during vibration or movement? Yes. The unit features a spring-loaded safety lock and an integrated hook to prevent unintended release and to indicate secure engagement. What materials and finish does the clamp have? The latch clamp 311 is made from galvanised material, offering corrosion-resistant surface protection for standard workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com