Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
35-41mm Toggle Clamp With Hook, Spring-Loaded, 150N Closing Force, Zinc-Plated - Kukamet
Benefit from robust, spring-assisted clamping, a compact horizontal base for simple mounting and a corrosion-resistant zinc-plated finish for long service life. Combine holding reliability, easy integration and a small footprint to keep fixtures moving smoothly. Order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch Clamp 311 — Kukamet spring-assisted lever clamp with horizontal base The Latch Clamp 311 is a compact, spring-assisted lever latch clamp designed for secure temporary fastening in jigs, enclosures and fixture applications with a horizontal base mounting. Spring-assisted quick locking Zinc-plated corrosion resistance Horizontal base for easy mounting Holding force up to 225 N Dependable clamping force for repeatable results The clamp delivers a defined holding force (max 225 N) and a separate closing force (max 150 N), ensuring components remain held without overloading delicate parts. The arm range 35–41 mm and the 45 mm thread allow small adjustments to suit a range of panel thicknesses or latch positions. Specified forces refer to the static capacities under normal operating conditions; the clear separation of closing and holding figures helps engineers design fixtures with predictable retention and safe release. This repeatability reduces rework and keeps cycle times stable on assembly lines. Fast installation and predictable operation on the shop floor A horizontal base simplifies attachment to flat fixture plates and machine tables, cutting assembly time and enabling compact layout. The spring-assisted mechanism provides consistent engagement and helps absorb minor misalignments during closure, while the integrated hook gives secure latching without additional parts. Finished zinc-plated for corrosion resistance and weighing only 0.14 kg, the unit is easy to position and replace. These characteristics make it suitable for production jigs, transport closures and inspection fixtures where a low-profile, reliable latch is required. Durable design with industrial supply security Constructed for regular workshop use, the latch combines a corrosion-resistant finish with a low-maintenance mechanism to reduce downtime. The unit’s light weight and compact footprint support modular fixture designs and make retrofitting straightforward. Supplied under the Kukamet range and distributed via Metav Werkzeuge, availability is supported from the Emmerich stock, backed by a long-standing supply network that values consistent quality and dependable delivery. The combination of robust finish, spring assistance and standardised dimensions supports both one-off prototypes and series production runs. For spring-assisted fastening from Kukamet, contact Metav Werkzeuge for technical advice or request the clamp (SKU 311-1-Y) from our Emmerich stock: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: 311-1-Y GTIN: 8680731504439 Manufacturer: Kukamet Weight: 0.14 kg Mounting: horizontal base Arm range: 35–41 mm Performance figures Closing force (max): 150 N Holding force (max): 225 N Thread length: 45 mm Materials and features Zinc-plated With spring With hook ECLASS: 21041718 ETIM: EC011973 FAQ What is the difference between closing force and holding force? Closing force refers to the initial actuation pressure (here 150 N) applied when the latch is engaged; holding force (225 N) is the sustained retention capacity once latched. The Kukamet latch clamp 311 is specified with both values to aid in fixture design. Can the clamp be mounted vertically as well as horizontally? The design of this model is intended for a horizontal base mounting; while alternative orientations may be possible, horizontal base attachment is recommended for best repeatability with the Kukamet latch clamp (SKU 311-1-Y). Is the finish suitable for humid or light outdoor environments? The zinc-plated finish provides corrosion resistance suited to workshop and light industrial conditions. For prolonged outdoor exposure, additional protective measures should be considered with the Kukamet unit. How is the clamping reach adjusted? Adjustment is achieved via the threaded spindle (45 mm thread length) and the arm position within the 35–41 mm range, allowing precise setting of engagement depth on fixtures. What typical applications suit this latch clamp? The clamp is well suited to jigs, transport closures, inspection fixtures and enclosure latches where a compact, spring-assisted locking action and repeatable holding are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35-65mm Clamp With Hook, Horizontal Base, 1,000N Thrust, 1,500N Holding Force, Blackened - Kukamet
Compact, adjustable and robust: the 311 locking toggle clamp delivers an adjustable 35–65 mm arm, a horizontal-foot mounting and a sturdy blackened finish, providing consistent clamping where space is limited. Order the clamp directly via Metav Werkzeuge or consult their specialists for application support. Kukamet 311 locking toggle clamp – horizontal foot, adjustable arm 35–65 mm Kukamet 311 locking toggle clamp for secure latching and simple integration in jigs, fixtures and closure applications. Horizontal-foot mounting for stable fixing Adjustable arm 35–65 mm for variable grips Holding force up to 1,500 N for secure retention Blackened finish with integrated hook Secure, space-saving clamping in tight jigs The 311 locking toggle clamp is designed to give reliable closure with a compact footprint suitable for confined tooling. The combination of horizontal-foot mounting and an adjustable arm (35–65 mm) allows the clamp to be positioned close to the workpiece, reducing interference with other tooling elements. This compact layout supports denser fixture design without sacrificing accessibility or repeatability, so parts remain accessible while clamped firmly. Measured force for predictable retention Built for repeatable performance, the latch offers a 1,000 N clamping force and a 1,500 N holding force, values that translate into dependable part retention under machining or assembly loads. Stating forces in newtons provides an objective basis for fixture design and safety margins; engineers can calculate expected shear and pull-out loads and select the clamp where these figures meet the operation’s requirements. The clear numerical data supports efficient integration into technical documentation. Durable finish and simple connection details Finished in blackened steel, the clamp resists workshop wear while maintaining a low-profile appearance. The integrated hook secures closures where a latch mechanism is required and the thread length 45 mm allows straightforward height adjustment or replacement of mating components. These features reduce the need for additional washers or adapters and contribute to a compact, low-maintenance assembly that remains serviceable over long runtimes. Quick mounting and predictable parts handling Designed for horizontal-foot installation, the clamp fits standard jig bases and fixture plates with minimal modification. The combination of a short thread length and light weight ensures fast set-up and reduced fixture inertia, which is beneficial for manual handling and automation alike. Supplied as SKU B311-1, the component suits workshops and production lines that prioritise straightforward retrofitting and consistent clamping performance. Choose the Kukamet 311 locking toggle clamp for dependable, space-saving clamping — contact Metav Werkzeuge for stock information and technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: B311-1 GTIN: 8680731508222 Manufacturer: Kukamet Facts Arm range: 35–65 mm Clamping force: 1,000 N Holding force: 1,500 N Thread length: 45 mm Weight: 0.135 kg ECLASS: 21041718 ETIM: EC011973 Special features Mounting: horizontal foot Finish: blackened With hook Category: Clamps Material: blackened steel FAQ Is this clamp suitable for fixture plates with a low profile? The Kukamet 311 locking toggle clamp is designed with a compact footprint and horizontal-foot mounting, making the latch suitable for low-profile fixture plates and confined assembly areas. What clamping and holding forces can be expected from this model? This toggle latch provides a clamping force of 1,000 N and a holding force of 1,500 N; these values are stated for design planning and risk assessment when using the SKU B311-1. Can the arm length be adjusted to different part thicknesses? Yes, the clamp features an adjustable arm range of 35–65 mm that allows adaptation to varying part thicknesses or to fine-tune engagement with the integrated hook. What finish does the clamp have and how does that affect maintenance? The device is supplied with a blackened finish which gives good surface wear resistance; routine inspection and light lubrication of moving parts are recommended to extend operational life. Is this clamp intended for manual or automated applications? The robust holding force and horizontal-foot mounting make the clamp suitable for both manual jigs and automated fixtures where a compact, repeatable latch is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35-65mm Toggle Clamp Horizontal Base With Safety Lock, 1,000 N Thrust, Blackened Steel - Kukamet
Take advantage of a compact, safety‑minded clamp that combines adjustable reach, a horizontal mounting base and clearly defined closing and holding forces for dependable production handling; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Latch clamp 311 — horizontal‑base lever latch with safety lock by Kukamet A robust Latch clamp 311 designed for horizontal mounting, offering a safety locking mechanism and an adjustable arm for repeatable, secure closures. Horizontal base for secure panel mounting Safety lock prevents accidental release Adjustable arm 35–65 mm for variable gaps Holding force up to 1,500 N Secure clamping that increases process reliability The safety lock and distinct force ratings provide clear operational advantages in repetitive workflows. With a closing force of 1,000 N and a holding force of 1,500 N, the device secures components during transport and machining while the lock reduces the risk of unintended opening. In practice, the separation of closing and holding forces means the clamp applies the necessary engagement pressure to latch reliably, while the holding rating indicates the sustained retention under load — a crucial distinction for assembly jigs and transport fixtures. This measurable performance supports predictable cycle times and fewer rejects in batch operations. Flexible installation and quick adjustment for varied assemblies Built for surface mounting on a horizontal base, the design simplifies fixture layout in limited spaces and on flat plates. The adjustable arm (35–65 mm) accommodates variations in component thickness and gap tolerances without additional parts, while the thread length 45 mm enables precise fine‑tuning during setup. The integrated hook allows positive engagement with mating parts, reducing play and improving repeatability. These features shorten setup time and reduce the need for custom shims, delivering practical efficiency gains on the shop floor. Compact, serviceable design with a protective finish Finished in a blackened treatment, the clamp offers a uniform surface that minimises glare and conceals light handling marks, helping maintain a professional appearance across workstations. At 0.135 kg the unit is lightweight yet sturdy, supporting easy handling during fixture assembly and rapid repositioning. The mechanical simplicity of the lever latch reduces maintenance points; periodic inspection of the locking latch and hook is sufficient to retain functional safety. For applications where reliable, repeatable closure is required in a compact footprint, this lever latch combines robust mechanics with straightforward upkeep. For tailored technical advice or to arrange supply from our Emmerich hub, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 regarding the Kukamet latch clamp 311 (SKU B311-1-L) Technical Data Article number: B311-1-L GTIN: 8680731508239 Brand: Kukamet Material / finish: blackened Mounting: horizontal base Facts Closing force: 1,000 N Holding force: 1,500 N Arm range: 35–65 mm Thread length: 45 mm Weight: 0.135 kg SKU: B311-1-L eClass: 21041718 ETIM: EC011973 Special features With safety lock With hook Lever‑style latch clamp Compact, light design FAQ What is the difference between closing and holding force for this clamp? Closing force refers to the engagement pressure applied when the lever is operated, while holding force denotes the maximum sustained retention; the Kukamet latch clamp 311 provides 1,000 N closing force and 1,500 N holding force for reliable clamping. Can the clamp be adjusted to fit different panel thicknesses? Yes, the adjustable arm (35–65 mm) and the 45 mm thread length allow the latch clamp 311 to be fine‑tuned for varying gaps and panel thicknesses. Is the latch suitable for surface mounting on jigs and fixtures? The horizontal base is explicitly designed for surface mounting, making the unit suitable for jigs, fixture plates and similar flat installations. What maintenance does the latch require? Routine visual checks of the safety lock, hook engagement and lever pivot are sufficient to maintain reliable operation; the blackened finish helps hide minor wear. Does the clamp include a hook for positive engagement? Yes, the Kukamet latch clamp 311 is supplied with a hook to ensure secure engagement with the mating catch. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35-65mm Toggle Clamp Horizontal Base With Safety Lock, 1,000N Thrust, Galvanised - Kukamet
Combine the compact zinc-plated construction, the adjustable 35–65 mm arm and the safety lock for reliable, repeatable clamping in fixture and jig applications. Order the locking toggle clamp 311 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 311 Locking Toggle Clamp — horizontal-foot clamp with safety lock and zinc plating The 311 locking toggle clamp is a compact horizontal-foot clamp designed for secure fastening in jigging, assembly and fixture applications, offering an adjustable arm and integrated safety locking mechanism. Safety lock for secure clamping Zinc-plated corrosion protection Adjustable arm 35–65 mm 1,500 N holding force, 1,000 N clamping force Secure, measurable clamping for reliable production High-repeatability clamping is provided through the combination of a defined 1,000 N clamping force and a peak 1,500 N holding force, ensuring workpieces remain stationary during machining and assembly. The difference between clamping and holding force is important: clamping force denotes the active pressure applied during engagement, while holding force indicates the maximum resistance against external loads. This distinction supports process planning and helps to avoid slippage or part movement, reducing rejects and downtime. Flexible mounting and quick adaptation to varying part sizes The clamp features a horizontal foot mount and an adjustable arm (35–65 mm) that adapts to a range of workpiece thicknesses without additional adapters. A 45 mm thread length allows secure fixation and fine positional adjustment on fixtures, while the integrated hook option supports quick engagement on centralised jigs. These attributes simplify integration into existing tooling plates and reduce the need for bespoke fixturing, making setup faster and more predictable. Durable, low-mass design for confined spaces Constructed with a zinc-plated finish, the device offers corrosion resistance suitable for workshop environments and light industrial use. With a mass of only 0.135 kg, the clamp minimises additional load on moving assemblies and can be positioned where space is limited. The light weight combined with robust materials means handling during assembly is easier while service life remains high, delivering consistent performance over repeated cycles. Safety-oriented construction for secure operation A mechanical safety lock prevents unintended release when clamped, contributing to operator safety and process reliability. The over-centre locking principle inherent to toggle-action designs ensures a secure hold under vibration and repeat loading. For production contexts where reproducible fixturing is essential, this clamp reduces variability and supports leaner workflows by lowering rework rates and re-clamping time. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet locking toggle clamp 311 into fixtures and production lines — delivered from our Emmerich warehouse with reliable supply chain handling Technical data Article number: 311-1-L GTIN: 8680731502220 ECLASS: 21041718 ETIM: EC011973 Facts Arm range: 35–65 mm Max clamping force: 1,000 N Max holding force: 1,500 N Thread length: 45 mm Weight: 0.135 kg Special features Material: zinc-plated Mounting type: horizontal foot With hook With safety lock Suitable for fixture and jig use FAQ What is the difference between clamping force and holding force for this clamp? Clamping force (1,000 N) refers to the active pressure applied when the clamp is engaged; holding force (1,500 N) is the maximum resistance the clamp assembly can withstand without release — relevant when planning loads for the Kukamet 311 locking toggle clamp. Can the clamp be mounted on standard tooling plates? Yes, the horizontal-foot design and 45 mm thread length allow the clamp to be fixed to common tooling plates and fixture bases used in assembly and light machining setups. Is the surface finish suitable for workshop environments? The zinc-plated finish provides corrosion resistance appropriate for most workshop and light industrial conditions, helping to extend service life and reduce maintenance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35-65mm Toggle Clamp Horizontal Base Zinc-Plated With Hook, 1000N Thrust - Kukamet
Take advantage of the combination of a galvanised surface, a 35–65 mm clamping range and a holding force up to 1,500 N for dependable, repeatable fixture work; order directly via Metav Werkzeuge or consult our specialists for integration advice. Kukamet 311 latch clamp — horizontal-foot toggle clamp, galvanised The 311 latch clamp is a horizontal-foot toggle clamp designed for fast, secure fastening in jigs, fixtures and bench-mounted assemblies. Galvanised finish for corrosion resistance Clamping range 35–65 mm Horizontal-foot mounting for bench fixtures Holding force up to 1,500 N Lightweight 135 g for easy handling Consistent, measurable clamping for production use The latch clamp provides a precise holding force that supports repeatable assembly and processing. With a holding force up to 1,500 N and a pressing force of 1,000 N, the device delivers quantifiable clamping performance that can be referenced in process planning and fixture design. The 35–65 mm adjustable span permits accommodation of a range of component sizes, reducing the need for multiple bespoke fixtures. For engineers and workshop planners, these numeric values translate directly into safer workholding and reduced rework. Fast mounting and repeatable operation for fixtures Designed with a horizontal-foot mounting, the clamp fits neatly to bench plates and fixture bases, enabling compact layouts and straightforward alignment. The integrated hook offers secure engagement and quick release, supporting rapid cycle times in repetitive tasks. The unit’s lightweight (0.135 kg) construction lowers fixture mass, which can be advantageous where inertia affects machine dynamics. Together, these features promote swift, repeatable clamping actions that improve overall throughput without complex adjustments. Robust finish and simple upkeep for long service life A galvanised surface finish provides corrosion resistance that extends service life in workshop and light industrial environments, reducing maintenance intervals and the need for frequent replacements. The clamp’s straightforward mechanical design simplifies inspection and lubrication routines, enabling predictable upkeep within standard workshop schedules. For procurement and maintenance teams, the combination of durable coating and uncomplicated mechanics supports lower total cost of ownership and reliable availability on the shop floor. Contact Metav Werkzeuge today to discuss the Kukamet 311 latch clamp for workshop fixtures and secure expert advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 311-1 GTIN: 8680731502206 Manufacturer: Kukamet eClass: 21041718 ETIM: EC011973 Facts Clamping range: 35–65 mm Maximum pressing force: 1,000 N Maximum holding force: 1,500 N Thread length: 45 mm Weight: 0.135 kg Special features Material: galvanised Mounting: horizontal foot With hook: yes Category: latch/toggle clamp FAQ What clamping span does the 311 latch clamp cover? The 311 latch clamp covers an adjustable span of 35–65 mm, suitable for a range of small-to-medium components in fixtures. How much force can the clamp hold under load? The clamp offers a holding force up to 1,500 N and a pressing force of 1,000 N, values intended for planning fixture retention and safety margins. Is the finish suitable for workshop use with occasional moisture? The galvanised surface provides corrosion resistance for workshop environments and helps protect the clamp from humidity and general wear. How is the clamp mounted to a fixture plate? Mounting is via a horizontal-foot configuration, allowing secure attachment to bench plates and fixture bases with standard fasteners. Does the product include an engagement hook? Yes — the unit is supplied with a hook, enabling firm engagement and quick release in repetitive operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35-65mm Toggle Clamp Horizontal Base, Safety Lock, Hooked Stainless Steel, 1,000N Thrust / 1,500N Hold - Kukamet
A robust stainless steel latch clamp with a safety lock and up to 1,500 N holding force, offering secure, repeatable fastening across an adjustable arm of 35–65 mm; ideal for fixture and assembly tasks. Order the latch clamp directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Latch Clamp 311 (S311-1-L) — Kukamet stainless steel horizontal-base latch clamp with safety lock The Latch Clamp 311 is a stainless steel lever clamp with a horizontal base, designed for secure, repeatable clamping in assembly, jigging and production-line applications. Stainless steel construction Horizontal base for stable mounting Safety lock prevents accidental release Adjustable arm 35–65 mm Secure hold for repetitive production tasks The latch clamp delivers a dependable holding force of 1,500 N and a maximum pressing force of 1,000 N, providing measurable security for repetitive operations. These figures translate into reduced part movement during machining or inspection, which lowers the risk of rework and improves throughput. The integrated safety lock keeps the clamp locked under vibration and handling, ensuring that workpieces remain secured until an intentional release is performed. For manufacturers seeking predictable clamping behaviour, the combination of defined forces and a positive lock gives a clear operational advantage. Fast installation and precise adjustment for fixtures Mounting is straightforward thanks to the horizontal base, which provides a low-profile and stable attachment to jigs or workbenches. The adjustable arm (35–65 mm) and a threaded spindle with a 45 mm thread length enable precise contact positioning and repeatable setup across varied part geometries. The small total mass and compact footprint make integration into tight assemblies simple, while the included hook offers an alternative engagement method for quick latching. These design choices reduce set-up time and simplify positioning on repeated production runs. Durable stainless-steel design for industrial environments Constructed from stainless steel, the clamp resists corrosion and stands up to regular cleaning or humid environments without performance loss. The modest weight of approximately 0.135 kg combines portability with resilience, making the component suitable for mobile fixtures as well as fixed production stations. Material selection and mechanical simplicity mean maintenance is minimal — lubrication and periodic inspection of the locking mechanism are sufficient to maintain reliable operation over time. Practical benefits for procurement and assembly planning As a compact lever clamp from Kukamet, the model supports efficient shop-floor workflows by offering consistent clamping force, easy positioning and secure locking. Incorporating such clamps into modular fixtures or handheld jigs helps standardise fastening points across multiple assemblies, reducing the variety of spare parts required and simplifying maintenance planning. Metav Werkzeuge’s distribution ensures a reliable supply channel and documentation for integration into existing fixtures and production lines. For reliable, corrosion-resistant levering and secure locking choose the Kukamet Latch Clamp 311 — contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S311-1-L GTIN: 8680731504040 ECLASS: 21041718 ETIM: EC011973 Core figures Weight: 0.135 kg Max pressing force: 1000 N Max holding force: 1500 N Arm range: 35–65 mm Thread length: 45 mm Material and features Material: stainless steel Mounting: horizontal base Safety lock With hook FAQ What is the maximum holding force of this latch clamp? The latch clamp has a maximum holding force of 1,500 N, giving reliable retention for assembly and fixture tasks. Can the clamp be adjusted for different part sizes? Yes, the clamp features an adjustable arm of 35–65 mm and a 45 mm threaded spindle for fine positioning. Is the material suitable for humid or corrosive environments? The clamp is made from stainless steel, which provides corrosion resistance suitable for workshops and light industrial settings. How is the clamp intended to be mounted? The model is supplied for horizontal-base mounting, offering a low-profile and stable attachment to jigs or benches. Which manufacturer and SKU identify this product? This product is the Kukamet Latch Clamp 311, SKU S311-1-L, produced by Kukamet and distributed through Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35-65mm Toggle Clamp With Hook, 1,000N Thrust, Stainless Steel - Kukamet
Robust stainless-steel construction combined with an adjustable arm (35–65 mm) and a holding force of 1,500 N ensures secure retention and long service life in jigs and fixtures. Order the 311 latch clamp directly via Metav Werkzeuge or consult our specialists for assistance with integration. 311 Latch Clamp (Stainless Steel, Adjustable Arm) by Kukamet The 311 latch clamp is a stainless-steel toggle clamp designed for secure closure and reliable holding in production jigs, fixtures and assembly applications. Stainless steel construction for corrosion resistance Adjustable arm 35–65 mm for flexible clamping Horizontal-foot mounting for stable installation Holding force up to 1,500 N for secure retention Consistent holding performance for repetitive production The latch clamp delivers measurable force where repeatability matters: a clamping force rated at 1,000 N and a holding force of 1,500 N provide clear separation between applied clamping and the sustained retention that prevents movement during machining or assembly. The supplied thread length 45 mm and the integrated hook enable fine adjustment and positive engagement. These characteristics reduce rework and downtimes by securing parts in a defined position, supporting faster cycle times and predictable throughput. Compact design that integrates into jigs and fixtures quickly Designed for straightforward integration, the clamp’s horizontal foot mounting allows secure attachment to plates and fixture bases without extensive modification. At only 0.135 kg, the device contributes negligible mass to lightweight assemblies while maintaining rigidity under load. The adjustable arm (35–65 mm) shortens setup times: once the arm length is set, repeat clamping is fast and consistent. Fewer adjustments mean less process variability and improved operator efficiency on the shop floor. Durable, low-maintenance build for workshop and production use Constructed from stainless steel, the latch clamp resists corrosion and stands up to regular cleaning and industrial environments, lowering lifetime maintenance needs. The simple mechanical design with a positive hook latch minimises wear points and inspection intervals, which supports a higher mean time between maintenance events. Combined with Metav’s supply reliability, this component is a practical choice where long-term availability and consistent quality are required. Contact Metav Werkzeuge to discuss procurement and application of the Kukamet 311 latch clamp and to arrange delivery or technical advice Technical data SKU: S311-1 GTIN: 8680731504033 Brand: Kukamet Material: Stainless steel Model: 311 Facts Arm range: 35–65 mm Clamping force (max): 1,000 N Holding force (max): 1,500 N Thread length: 45 mm Special features With hook Horizontal-foot mounting Corrosion-resistant stainless steel Compact lightweight design FAQ What clamping and holding forces does this clamp provide? The Kukamet 311 latch clamp offers a clamping force of 1,000 N and a holding force of 1,500 N; the SKU is S311-1. Is the clamp suitable for use in corrosive or humid environments? Yes, the clamp’s stainless steel construction provides corrosion resistance suitable for workshops and industrial settings. What arm range and mounting method does it support? The device accommodates an adjustable arm range of 35–65 mm and is fitted for horizontal-foot mounting with a 45 mm thread length. Does the clamp include a hook and how heavy is it? The clamp is supplied with a hook and has a weight of 0.135 kg, making it easy to integrate into fixtures without significant added mass. Can the clamp be used for jigs and repeatable positioning in production? Yes, the Kukamet 311 latch clamp is designed for jigs and fixtures where repeatable, secure positioning is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35.6mm Drill Chuck APU Self‑Tightening SK40-APU08, DIN 69871A - Vertex
Benefit from a self‑tightening APU design, standardised DIN 69871A taper and compatibility with SK40-APU08 collets (Ø0.5–8 mm) to secure tools reliably and reduce rework; order via Metav Werkzeuge or contact our consultants for specification support. Drill chuck SK-511 (APU) — self‑tightening, SK40, DIN 69871A (Vertex) A self‑tightening drill chuck, Drill chuck SK-511 (APU), engineered for SK40 taper spindles and intended for precision clamping of small-diameter tools across general workshop and production applications Self‑tightening APU design for secure clamping Compatible with SK40-APU08 collets Collet range Ø0.5–8 mm DIN 69871A taper for standard spindles Secure clamping for repeatable machining results The self‑tightening mechanism delivers consistent clamping force that simplifies tool changes while maintaining concentricity. Designed to work with SK40 collet systems, the chuck supports a collet range Ø0.5–8 mm, enabling precise mounting of drills and small cutters. This reliability reduces the need for repeat operations and contributes to stable process quality in batch and single-piece production. The chuck’s balanced design supports steady rotation, improving surface finish and extending tool life. Standardised mounting for easy integration Compliance with DIN 69871A ensures the chuck mates with common machining centres and toolholders, allowing straightforward retrofit and interchangeability. The combination of the standard taper and the SK40-APU08 collet interface simplifies machine setup and inventory management. For production planners and toolroom managers, this means fewer bespoke adapters and a predictable equipment footprint, which supports streamlined maintenance schedules and faster changeovers. Practical workshop benefits and handling Weighing approximately 1.4 kg, the unit is robust without being cumbersome, which helps during manual handling and fixture changes. The compact diameter (35.6 mm) and the proven Vertex workmanship make the chuck suitable for tight spindle noses and constrained tool magazines. The design emphasises both ergonomic handling and compatibility with existing collet inventories, so integration into daily workflows is efficient and low-friction. Built for precision, specified for professionals As a plain but essential toolholder, the chuck prioritises measurable performance: repeatable concentricity, secure clamping and standardised mounting. Those responsible for quality assurance will value the clear specification and the ability to verify performance with routine checks. Where process reliability matters, choosing a standardised, self‑tightening chuck reduces variability and supports consistent production output without requiring complex user adjustments. Contact Metav Werkzeuge for tailored advice on the Vertex SK-511 — our specialists in Emmerich assist with compatibility checks and specification choices to ensure the chuck meets the intended application Technical data Article number: SK-511 GTIN: 4061905084836 Manufacturer: Vertex Facts Weight: 1.4 kg Diameter: 35.6 mm Collet range: Ø0.5–8 mm eCl@ss: 21020490 ETIM: EC002125 Special features Self‑tightening (APU) Taper interface: DIN 69871A Collet type: SK40-APU08 FAQ Which collet sizes does the chuck support? The chuck supports collets in the range Ø0.5–8 mm, suitable for small drills and reamers. Is the spindle interface compatible with standard SK40 holders? Yes; the chuck uses the SK40-APU08 collet interface and mounts to a DIN 69871A taper. Is the clamping mechanism self‑tightening or manual? The device features a self‑tightening APU mechanism for secure and repeatable clamping. What is the weight and typical handling impact? The unit weighs 1.4 kg, offering a balance between robustness and manageable handling during tool changes. Can the chuck be used for high-precision applications? Designed for repeatable concentricity and stable clamping, the chuck is suitable for precision toolholding in toolrooms and production settings. Who manufactures the chuck and where is it sourced from? The chuck is produced by Vertex and is supplied via Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
35.6mm Self-Clamping APU Collet Chuck SK30‑APU08, DIN 69871A - Vertex
Rely on the combination of self‑tightening clamping, DIN 69871A shank compatibility and a compact 0.7 kg construction for dependable toolholding in precision setups; order the SK-509 drill chuck directly via Metav Werkzeuge or consult our specialists for application advice. SK-509 SK30 APU self‑tightening drill chuck with DIN 69871A shank — Vertex The SK-509 is a drill chuck for SK30 spindles, providing a self‑tightening APU clamping system for tool diameters from Ø0.5 to 8 mm. SK30 taper with DIN 69871A shank Self‑tightening APU clamping principle Tool range Ø0.5–8 mm capacity Compact 0.7 kg design for dynamic spindles Consistent clamping for repeatable machining The self‑tightening APU mechanism secures tooling automatically as torque is applied, reducing slippage and helping to maintain constant concentricity during drilling and light machining. This mechanical principle offers reliable clamping without additional tightening tools, which reduces setup variability and contributes to stable process results. For production environments where reproducibility matters, the construction supports consistent part quality across repeat cycles. Seamless integration with SK30 spindles and industry standards Built to the DIN 69871A specification and featuring the SK30 taper, the chuck is intended for direct mounting on compatible spindles, enabling straightforward tool changes and minimal adapter requirements. The specified collet interface SK30-APU08 aligns with established tooling systems, allowing integration into existing machine fleets with little adaptation. This standardised fit supports faster machine turnarounds and lowers the risk of misalignment at installation. Precision handling of small‑diameter tooling With a usable range of Ø0.5–8 mm, the chuck is designed to hold small twist drills, reamers and similar tools with accuracy. The geometry and clamping method minimise runout, which helps to preserve hole quality and tool life when producing fine features. The capacity also allows for flexible tool selection within one holder, simplifying inventory and making the holder a practical choice for tasks that require small to medium tool diameters. Lightweight, compact form for dynamic spindle performance Weighing just 0.7 kg and measuring approximately 35.6 mm in diameter at its key interface, the chuck is compact enough to reduce inertia on the spindle while still delivering robust clamping. The low mass is advantageous for machines that demand quick acceleration and deceleration or frequent tool changes. As a Vertex product, the design emphasises dependable toolholding and straightforward maintenance, supporting efficient workshop workflows and predictable machining cycles. Choose the Vertex SK-509 for dependable SK30 clamping with DIN 69871A compatibility — contact Metav Werkzeuge for tailored application guidance and ordering support. Technical data Article number: SK-509 SKU: SK-509 GTIN: 4061905092206 Brand: Vertex Facts Diameter: 35.6 mm Weight: 0.7 kg Capacity: Ø0.5–8 mm Standard: DIN 69871A Collet type: SK30-APU08 Special features Self‑tightening APU clamping Tapered shank SK30 Compact design FAQ What tool range can be held by this chuck? The Vertex SK-509 drill chuck holds tools from Ø0.5 to 8 mm, making the SK-509 suitable for small-diameter drills and similar tooling. Is the chuck compatible with standard SK30 spindles? Yes, the chuck complies with the DIN 69871A specification and fits SK30 spindles via the SK30 taper and SK30-APU08 interface. How heavy is the SK-509 and why does that matter? The SK-509 weighs 0.7 kg; the lightweight design helps reduce spindle inertia and supports quicker acceleration and smoother dynamic performance. Does the self‑tightening APU mechanism require extra tools? No, the self‑tightening APU clamping principle secures tooling through spindle torque, avoiding additional tightening tools for routine operation. What identifiers are available for ordering or inventory? The Vertex SK-509 drill chuck is listed under SKU SK-509 and GTIN 4061905092206 for procurement and stock control. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3500 N Push Rod Clamp Vertical Base Zinc-Plated, M10x70 Spindle - Kukamet
Take advantage of a durable, galvanised clamping solution with a maximum pressing force of 3,500 N and a compact design weighing just 0.96 kg for reliable fixture performance; order the push‑rod clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Push‑rod clamp 512 by Kukamet — galvanised, 3,500 N pressing force A Push‑rod clamp 512 for secure fixture clamping, featuring a vertical foot and an M10x70 pressure spindle for straightforward mounting in jigs and workshop tooling Galvanised steel construction Maximum pressing force 3,500 N Holding force up to 3,700 N Vertical foot mounting with M10x70 spindle Consistent clamping performance for production use Designed for repetitive clamping tasks, the push‑rod clamp delivers a clearly specified pressing force of 3,500 N and a holding force of up to 3,700 N, providing measurable reliability during cycle work. These figures translate into stable part fixation and reduced rework rates in series operations. The compact mass of 0.96 kg keeps dynamic loads low and simplifies positioning on fixtures, while the defined force values make process planning and safety assessment straightforward. Easy integration into jigs and fixtures The vertical foot design with an M10x70 pressure spindle allows the clamping unit to be mounted on plates and tooling blocks with minimal adaptation. The standardised spindle thread supports compatibility with existing mounting hardware and simplifies replacement. A galvanised finish adds corrosion resistance, helping retain functional tolerances in workshop environments and extending service intervals compared with untreated alternatives. Low maintenance and durable construction Galvanised steel construction contributes to long service life and consistent performance under normal workshop conditions. The simple mechanical principle behind the device minimises wear‑sensitive parts, making inspections and upkeep uncomplicated. Clear technical specs and robust materials reduce downtime and support predictable maintenance cycles for busy production lines. Where this clamp works best The compact geometry and vertical‑foot mounting make this clamping unit well suited for jigs, fixture plates and small‑batch production where a defined, repeatable clamping force is required. The clearly stated mechanical parameters support engineering documentation and quality control processes, enabling planners to select fixtures with measurable outcomes rather than estimations. For purchasing details or advice on integrating the Kukamet push‑rod clamp 512 into existing fixtures, contact Metav Werkzeuge in Emmerich for delivery options and technical guidance. Technical data SKU: 512-5 GTIN: 8680731502688 Manufacturer: Kukamet Facts Weight: 0.96 kg Maximum pressing force: 3,500 N Maximum holding force: 3,700 N Pressure spindle: M10x70 Mounting type: vertical foot eClass: 21041716 ETIM: EC011973 Special features Material: galvanised steel Compact design for fixture integration Suitable for jigs and production tooling FAQ How much clamping force does the device provide? The clamp offers a maximum pressing force of 3,500 N and a holding force up to 3,700 N for secure fixation. What mounting method is required for installation? The unit is designed for vertical foot mounting and uses an M10x70 pressure spindle for attachment to fixture plates. Is the surface protected against corrosion? Yes, the clamp is supplied in a galvanised finish to improve resistance to workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3500 N Push Rod Clamp Vertical Base, M10x70 Spindle, 0.96kg, Black Oxide Finish - Kukamet
Take advantage of the combination of high clamping forces, compact construction and straightforward mounting to ensure reliable fixture performance. Order the clamp directly via Metav Werkzeuge or consult the sales team for integration advice. Push-rod clamp 512 – lever-style workholding clamp by Kukamet, vertical-foot mounting, M10 x 70 spindle Push-rod clamp 512 is a lever-operated clamping device intended for secure workholding in fixtures and jigs across production and workshop environments. Holding force up to 3,700 N Pressing force 3,500 N M10 x 70 pressure spindle Vertical-foot mounting, blackened finish High-force clamping for consistent production results The clamp delivers holding force 3,700 N and pressing force 3,500 N, values that translate into stable retention and dependable contact pressure in repeated cycle applications. These measurable forces mean the device resists shifting under load and helps maintain positional accuracy in fixtures. By specifying force values in newtons, engineers gain a verifiable basis for comparing clamping options and designing toleranced setups. The lever-operated mechanism provides rapid actuation and predictable force transfer, contributing to repeatable clamping that reduces rework and keeps throughput steady. Robust finish and compact footprint for workshop integration Constructed with a blackened finish, the unit resists light surface corrosion while keeping the visual profile discreet on the shop floor. With a mass of 0.96 kg, the component is light enough for straightforward mounting yet substantial enough to provide the rigidity expected in industrial settings. The vertical-foot mounting arrangement allows mounting on horizontal surfaces where vertical clamping action is required; the included M10 x 70 pressure spindle enables adjustable contact length and simple fine-tuning of clamp engagement. These features support compact fixture designs and make retrofitting into existing jigs uncomplicated. Fast set-up and reliable fixture behaviour The lever-style construction ensures quick locking and unlocking sequences, shortening cycle times during assembly or test operations. Where repeated clamping and rapid release are required, the mechanism offers an efficient trade-off between ease of handling and securing force. The pressure spindle allows controlled contact pressure to be set and readjusted without disassembling the clamp, which supports safe, repeatable operation and reduces downtime for adjustments. In short runs or longer production series, this improves process stability and operator confidence in the fixture. Practical placement and common workshop applications Designed for integration into jigs, fixtures and assembly stations, the rod-style clamp is suited to tasks that demand consistent holding and straightforward mechanical control. Its compact form and mounting type permit use in confined spaces or on multi-clamp tooling plates. The combination of measured forces and adjustable spindle means the unit is appropriate where predictable clamping is essential to maintain part geometry during machining, inspection or assembly operations. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet clamp 512 into existing fixtures and to secure reliable supply directly from Emmerich. Technical Data Article number: B512-5 GTIN: 8680731508727 Manufacturer: Kukamet Facts Weight: 0.96 kg Max pressing force: 3,500 N Max holding force: 3,700 N Pressure spindle: M10 x 70 Mounting type: vertical foot ECLASS: 21041716 ETIM: EC011973 Special features Blackened finish Category: Spanner Story trigger: lever clamp FAQ What maximum holding force does the clamp provide? The Kukamet push-rod clamp 512 offers a holding force of 3,700 N, enabling secure retention in repeatable fixture arrangements (SKU B512-5). Which spindle size is fitted and what is its purpose? The pressure spindle is M10 x 70, providing adjustable contact length for fine-tuning clamp engagement and ensuring consistent contact pressure on the workpiece. How is the clamp mounted on a fixture? Mounting is via a vertical foot, allowing the clamp to be fastened to horizontal fixture plates where vertical clamping action is required. Does the finish protect against corrosion in workshop conditions? The unit has a blackened finish, which offers basic surface protection against wear and mild corrosion; regular inspection and standard workshop maintenance are recommended for harsh environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3500 N Quick-Acting Screw Clamp With Mounting Rail, Zinc-Plated - Kukamet
Benefit from a galvanised finish, compact 1.32 kg construction and a max clamping force of 3,500 N for fast, secure fixturing; the clamp’s mounting‑rail compatibility reduces setup time and improves repeatability. Order the clamp directly via Metav Werkzeuge or consult our specialists for application support. Quick-action clamp 841 — galvanised toggle clamp, mounting-rail fitting The Quick-action clamp 841 is a galvanised toggle clamp designed for rapid fixing on a mounting rail, suitable for production jigs and workshop fixturing where reliable and repeatable holding is required. Galvanised finish for corrosion resistance Mounting rail for quick installation Max clamping force 3,500 N Compact 1.32 kg robust design Fast, reliable clamping that keeps production moving The clamp delivers a clear efficiency advantage through its quick-action toggle mechanism and measurable forces: 3,500 N clamping power with 4,000 N holding capacity ensures components remain secure during machining or assembly. The 82° operating angle provides consistent leverage and makes force transmission predictable, which helps reduce setup variability and scrap rates. These quantifiable characteristics support faster cycle times and greater process stability for repetitive tasks in small-series or high-volume environments. Robust, low-maintenance construction for continuous use Constructed in galvanised steel and finished for workshop conditions, the clamp resists corrosion and wear to extend service intervals. Its screw-clamp style design combines mechanical simplicity with durability, so maintenance is limited to routine inspection and lubrication. At just 1.32 kg, the unit is compact enough for dense fixture layouts yet substantial enough to withstand industrial handling, giving a favourable balance between portability and longevity for bench and line applications. Simple mounting and intuitive handling reduce downtime Fitting the clamp to a mounting rail enables fast repositioning or replacement, shortening setup and changeover time. The lever principle is straightforward: engage the toggle to apply force and lock the workpiece; release to remove it. This familiar operation minimizes training effort and lowers the risk of operator error in small teams or multi-shift operations. Backed by a reliable supply chain and product verification from a European quality filter, the clamp supports predictable uptime and consistent clamping performance. Contact Metav Werkzeuge today to specify the Kukamet Quick-action clamp 841 for your fixtures and jigs — Metav’s consultants can advise on rail compatibility and application details, email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: 841-2 GTIN: 8682843521809 ECLASS: 21020701 ETIM: EC011973 Core specifications Max clamping force: 3,500 N Max holding force: 4,000 N Weight: 1.32 kg Operating angle: 82° Category: Spanner / Clamp Special features Material: galvanised steel Mounting: with mounting rail Style: screw-clamp type Application: lever / toggle clamping FAQ What materials is the clamp suitable for? The Kukamet Quick-action clamp 841 is a general-purpose clamp; material suitability depends on fixture design and cutting forces, with the clamp providing repeatable holding for a wide range of workshop applications. How is the clamp mounted to a workbench or jig? The clamp is designed for attachment to a mounting rail, allowing quick positioning and secure fixing in modular fixture systems. What maintenance is required to keep clamping performance? Periodic visual inspection, light lubrication of the toggle pivot and checking of fastenings preserve the clamp’s performance; the galvanised finish reduces the need for corrosion-specific upkeep. Can the clamp withstand continuous industrial use? Yes, the galvanised construction and screw-clamp design of the 841 are geared toward regular workshop and production use, offering robust service life under typical operating conditions. Is the holding and clamping force measured or rated? The clamp is specified with a max clamping force of 3,500 N and a holding force of 4,000 N, values intended to support reliable selection for specific fixturing needs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3500 N Toggle Clamp Vertical Base With Hook, Zinc Plated, 55mm Thread Length - Kukamet
Benefit from the combination of galvanised corrosion resistance, a vertical-foot base and a hooked fastening for secure, repeatable clamping; with a rated 3,500 N closing force and 4,000 N holding capacity, the unit supports reliable fixture work — order the clamp directly via Metav Werkzeuge or consult our specialists for suitability. Kukamet Toggle Latch Clamp 412 — galvanised, vertical-foot design with hook Kukamet Toggle Latch Clamp 412 is a compact toggle latch designed for secure closure and repeatable fixation in jigs, fixtures and transport fixtures where a vertical-foot mounting is required. Galvanised corrosion protection Vertical-foot mounting for firm anchoring Hook fastening for quick engagement 4,000 N maximum holding capacity Secure, repeatable fastening that reduces setup time The toggle latch clamp provides a dependable mechanical advantage: a maximum closing force of 3,500 N produces a consistent clamping action while the hook element secures the mating part. This repeatability reduces adjustment cycles and minimises rework in assembly processes, making the clamp well suited to production jigs and transport fastenings. The compact design and clear mechanical stop improve operator confidence during repetitive handling and short cycle times. Robust finish and installation that withstands workshop conditions A galvanised finish protects the body against corrosion, which extends service life in mixed workshop environments. The clamp is supplied with a vertical-foot base for straightforward mounting to plates or frames; the thread length 55 mm allows for secure bolting and simple height compensation. With a mass of 0.86 kg, the component adds little weight to fixtures while delivering substantial holding capacity, supporting long-term, low-maintenance operation. Practical benefits for production and maintenance planning Integration into existing tooling is simplified by the clamp’s standard form factor and the visible mechanical action of the lever. The hook fastening enables rapid engagement and release, aiding takt-time efficiency on manual or semi-automated lines. From a maintenance perspective, the simple mechanical construction supports quick inspection and interchangeability, reducing downtime and making inventory planning more predictable for procurement teams. For robust fixture work and reliable supply, choose the Kukamet Toggle Latch Clamp 412 — contact Metav Werkzeuge in Emmerich for specialist advice and assured delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 412-4 GTIN: 8680731506730 Manufacturer: Kukamet Core specifications Weight: 0.86 kg Maximum closing force: 3,500 N Maximum holding force: 4,000 N Thread length: 55 mm eClass: 21041718 ETIM: EC011973 Special features Material: galvanised Mounting type: vertical-foot Hook fastening: yes FAQ What is the maximum holding force of this clamp? The Kukamet Toggle Latch Clamp 412 offers a maximum holding force of 4,000 N, suitable for robust fixture and transport applications. Can the clamp be mounted to a plate or frame? Yes, the unit features a vertical-foot mounting style and a 55 mm thread length for secure bolting to plates or frames. Is the clamp corrosion-resistant for workshop use? The clamp is galvanised, providing corrosion protection suitable for typical workshop and light-industrial environments. What materials and applications is this latch suited for? The latch is intended for general workshop fixtures and jigs where a hooked toggle latch is required; its mechanical design supports repeatable closure in assembly and transport fixtures. Which SKU should be ordered for this model? Order SKU 412-4 for the Kukamet Toggle Latch Clamp 412; consult Metav Werkzeuge for compatibility with specific fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3500N Horizontal Clamp With Hook, 55mm Thread Length, Black Oxide Finish - Kukamet
Take advantage of robust clamping performance, compact mounting and a corrosion-resistant finish for reliable workholding in daily production. Order the (locking toggle clamp 411) directly via (Metav Werkzeuge) or ask our consultants if needed. Locking toggle clamp 411 — Kukamet lever clamp with horizontal base and 4,000 N holding force A compact locking toggle clamp 411 designed for secure workholding in jigs and fixtures, offering a horizontal mounting foot and an integrated hook for versatile fixation. Horizontal base for stable mounting Holding force up to 4,000 N Clamping force up to 3,500 N Blackened finish with integrated hook Secure and measurable clamping for consistent results The lever-actuated latch delivers a holding force of 4,000 N and a clamping force of 3,500 N, values that translate directly into repeatable part retention during machining, assembly or inspection tasks. The mechanical advantage of the lever action ensures fast locking and release without complex adjustment; the specified forces provide a clear, comparable basis for integrating the device into an existing fixture concept. The robust force figures reduce rework and help to maintain throughput in short-cycle production. Stable installation and compact footprint for tight fixtures With a horizontal base for mounting and a thread length of 55 mm, the clamp is intended for secure fastening on flat jig plates and tooling blocks. At 0.86 kg the unit combines low mass with a compact form factor, enabling dense fixture layouts where space is limited. The horizontal mounting arrangement also simplifies alignment and reduces the need for additional brackets, which supports lean fixture design and quicker changeovers. Durable finish and practical attachment options The component is supplied with a blackened finish, giving corrosion resistance suited to workshop environments while limiting glare in illuminated setups. An integrated hook provides a positive engagement point for latching straps or mating catches and expands the clamp’s versatility across different fixturing concepts. The simple mechanical construction minimises maintenance requirements and enables economical long-term operation. Designed for workshop reliability and straightforward integration As a lever-type clamp from Kukamet, this model is engineered to fit established industrial workflows: clear performance data and standardised mounting reduce specification ambiguity. The compact latch is suitable for small-batch production as well as series assembly. Where precise clamping force and quick operation are priorities, the toggle design supports efficient process flow and predictable quality results. Choose the Kukamet locking toggle clamp 411 for dependable 4,000 N holding force — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and prompt supply Technical data Article number: B411-4 GTIN: 8680731508628 Manufacturer: Kukamet SKU: B411-4 eClass: 21041718 ETIM: EC011973 Core specifications Weight: 0.86 kg Holding force: 4,000 N Clamping force: 3,500 N Thread length: 55 mm Materials & special features Finish: Blackened finish Mounting: Horizontal base Hook: Integrated hook (with hook) Design: Lever toggle clamp FAQ What is the maximum holding capacity of this clamp? The Kukamet locking toggle clamp 411 has a specified holding force of 4,000 N and a clamping force of 3,500 N. How is the clamp mounted in a fixture? The unit is fitted via a horizontal base, intended for secure attachment to flat jig plates or tooling blocks; thread length is 55 mm for the fastening hardware. Is the clamp suitable for harsh workshop environments? The blackened finish provides basic corrosion resistance appropriate for general workshop use; regular inspection and appropriate cleaning will extend service life. Can the clamp be used in high-density fixture layouts? Yes. At 0.86 kg and with a compact lever design, the clamp is suitable for tight fixtures where space optimisation is required. Does the clamp include a hook for alternative latching methods? Yes, the latch is supplied with an integrated hook, enabling use with catches or straps where needed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3500N Pushrod Clamp Without Base M10x70 Spindle, Blackened - Kukamet
A compact clamp delivering a 3.5 kN clamping capacity together with a 3.7 kN holding force, the unit combines robust retention and a low installation profile for reliable fixture work; order the B513-5 via Metav Werkzeuge or consult Metav's advisors for application guidance and supply. Push-rod clamp 513 — Kukamet clamp with 3.5 kN capacity A Push-rod clamp 513 designed for straight-line clamping in jigs and fixtures, offering a space-saving solution where secure, repeatable retention is required Push-rod clamp 513 by Kukamet Max clamping force 3.5 kN Holding force up to 3.7 kN M10×70 pressure spindle, no foot Consistent retention for precision fixtures The clamp provides a 3.5 kN clamping force and a 3.7 kN holding force, values that translate directly into dependable workpiece retention during machining and assembly. Clamping force describes the active pressure applied when the spindle is engaged, while holding force indicates the resistance against displacement under load. For fixture designers and production engineers, this means fewer re-clamps and improved process stability, particularly in repetitive operations where consistent contact pressure reduces cycle variation and scrap rates. The clear, measurable force data supports risk-aware planning on the shop floor. Low-profile design for flexible integration With a M10×70 pressure spindle and a compact mass of 0.71 kg, the clamp is engineered for easy inline installation into existing layouts. The absence of a mounting foot allows installation directly into fixture plates or welded brackets, saving lateral space and enabling closer packing of clamps where needed. The blackened finish provides a subdued surface that minimises reflection and offers basic corrosion resistance, contributing to a longer service life in standard workshop environments. The small footprint and standard spindle thread make retrofitting straightforward for both new jigs and retrofit projects. Robust construction for everyday workshop use Manufactured with a focus on mechanical reliability, this clamp is suited to repetitive production tasks and manual assembly stations where simple, durable components reduce downtime. The lightweight construction aids handling during fixture assembly while the mechanical design ensures a straightforward maintenance regime: periodic inspection, spindle lubrication and thread check are generally sufficient. Given the compact form and defined performance figures, this clamp supports efficient workflows and predictable outcomes in medium-duty clamping applications. Choose the Kukamet Push-rod clamp 513 (SKU B513-5) for dependable straight-line clamping; contact Metav Werkzeuge for tailored advice and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Product: Push-rod clamp 513 SKU: B513-5 GTIN: 8680731508765 Manufacturer: Kukamet Core specifications Clamping force: 3,500 N Holding force: 3,700 N Pressure spindle: M10×70 Weight: 0.71 kg ECLASS: 21041716 ETIM: EC011973 Materials & features Finish: blackened burnished Mounting: without foot Category: Spanner Model type: push-rod clamp FAQ What clamping and holding forces does the clamp deliver? The Kukamet Push-rod clamp 513 offers a clamping force of 3,500 N and a holding force of 3,700 N, providing reliable retention for medium-duty fixtures. Is the clamp supplied with a mounting foot? No, this model is supplied without a foot; the design is for inline mounting into fixture plates or custom brackets. What spindle specification is used for actuation? The unit uses an M10×70 pressure spindle, suitable for standard threaded adjustments and simple integration into jig systems. How heavy is the clamp and what does that mean for fixture design? Weighing 0.71 kg, the clamp is easy to position during assembly and helps keep the overall fixture mass low while maintaining rigidity. What does the blackened finish provide? The blackened burnished finish reduces surface reflection and offers basic corrosion resistance, helping the clamp retain appearance and function in workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3500N Vertical Toggle Clamp With Hook, 55mm Thread Length, Black Oxide – Kukamet
Take advantage of a compact, high‑force latch clamp that combines reliable 3,500 N clamping force, a sturdy vertical base and a corrosion‑resistant finish for continuous production use; order directly via Metav Werkzeuge or consult our specialists for integration advice. Latch clamp 412 by Kukamet — vertical‑base closure clamp, 3,500 N clamping force Latch clamp 412 is a vertical‑base closure clamp for secure fixture and repeatable holding in production and workshop environments Vertical base for secure mounting Clamping force up to 3,500 N Holding force up to 4,000 N Blackened finish for surface protection Consistent clamping performance for repetitive assembly The latch delivers a predictable clamping force of 3,500 N, with a holding force rated at 4,000 N, making it suitable for repetitive fastening and closure tasks where consistent pressure is required. The numeric ratings simplify process planning: clamping force defines the active pressure applied by the lever mechanism, while holding force indicates the maximum static retention under load. This distinction helps technicians and engineers specify the clamp for fixtures, jigs and small assemblies where controlled force and repeatability are essential. Compact mounting and simple mechanical integration Designed with a vertical base, the closure clamp mounts close to the workpiece and reduces interference with adjacent components. The thread length 55 mm provides secure anchorage for through‑bolting or stud mounting, and the integrated hook supports positive engagement with mating parts. The modest weight of 0.86 kg aids handling during installation and keeps moving masses low in automated or manual fixtures, reducing cycle stresses and prolonging component life. Robust finish and low upkeep for continuous use Manufactured with a blackened finish, the device resists surface wear and provides basic corrosion protection in typical workshop atmospheres, lowering maintenance intervals. The solid construction and simple lever geometry minimise adjustment needs and allow quick visual checks for serviceability. For operations that demand steady throughput, the clamp offers a durable mechanical solution that requires only routine inspection rather than complex servicing. Contact Metav Werkzeuge for procurement and technical matching — Metav’s Emmerich‑based supply and product expertise ensures rapid delivery and reliable fitment for Kukamet clamps such as the 412 (SKU B412-4) Technical Data Article number: B412-4 GTIN: 8680731508659 Manufacturer: Kukamet Facts Max clamping force: 3,500 N Max holding force: 4,000 N Thread length: 55 mm Weight: 0.86 kg SKU: B412-4 Special features With hook Blackened finish Mounting type: vertical base Category: Spanner (clamp) eClass: 21041718 ETIM: EC011973 FAQ What clamping and holding forces can be expected from this clamp? The latch clamp 412 provides a clamping force of 3,500 N and a holding force of 4,000 N, values suited to repeatable fixture work and secure retention in assembly processes. Is the clamp suitable for bolted mounting on a fixture plate? Yes, the vertical base design and the 55 mm thread length permit through‑bolting or stud mounting for firm attachment to fixture plates. Does the device include a hook and what is its purpose? The closure clamp is supplied with an integrated hook that ensures positive engagement with the mating latch point, improving repeatability and preventing unintentional release. How durable is the surface finish in workshop conditions? The blackened finish offers basic corrosion resistance and wear protection for standard workshop environments; regular inspection will ensure long service life. Which identification numbers should be quoted when ordering? For ordering and inventory, quote the SKU B412-4 and the GTIN 8680731508659 to ensure the correct Kukamet latch clamp is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
350cc Hand Lever Lubrication Pump 15 Kg/cm², 85x85mm - Vertex
Take advantage of the lever-operated action and a 350 cm³ reservoir combined with a maximum delivery pressure of 15 kg/cm² to maintain consistent lubrication cycles; order the Vertex unit directly via Metav Werkzeuge or contact our consultants for application advice. LT-6 Hand Lubrication Pump (lever-operated) by Vertex — 350 cm³, 15 kg/cm² The LT-6 hand lubrication pump is a lever-operated lubrication unit intended for controlled manual dispensing of greases and oils in workshop and maintenance environments. Lever-operated design for precise dosing 350 cm³ reservoir for extended use Delivers up to 15 kg/cm² pressure Consistent lubrication through precise dosing A lever pump ensures precise dosing with every stroke, which reduces waste and prevents both under- and over-lubrication in bearings and machine joints. With a maximum delivery pressure of 15 kg/cm², the pump provides reliable force for dense greases while maintaining controlled output, so lubrication intervals can be standardised and predictable. This performance-oriented approach supports higher process reliability and lower rework rates in routine maintenance. Fewer interruptions from a generous reservoir The 350 cm³ reservoir reduces refill frequency, supporting longer continuous operation between maintenance tasks and contributing to reduced downtime. When used for scheduled servicing, the larger capacity translates directly into fewer interruptions on the shop floor, streamlining maintenance workflows and allowing technicians to focus on critical adjustments rather than frequent top-ups. Compact, transportable design for workshop use Despite its substantial capacity, the unit retains a compact footprint of 85 × 85 mm and a light weight of 1.2 kg, which makes it easy to position at grease points or carry between workstations. The compact dimensions support flexible storage and straightforward integration into a toolbox or service trolley, enabling teams to bring precise lubrication where it is needed without adding bulk. Straightforward operation to speed up routine tasks The lever-operated mechanism gives direct tactile feedback for metered application, enabling controlled dispensing without electrical power. The simple manual operation reduces complexity for site technicians and facilitates consistent technique across shifts. Supplied through Metav’s quality filter in Emmerich, the unit benefits from a distribution chain focused on reliability and accessible technical expertise for industrial customers. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex LT-6 lever pump or request detailed specifications by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: LT-6 Brand: Vertex GTIN: 4061905088384 eClass: 23069090 Core technical data Capacity: 350 cm³ Max. pressure: 15 kg/cm² Dimensions: 85 × 85 mm Weight: 1.2 kg Special features Lever-operated design Compact footprint Suitable for manual lubricant dispensing Type: with lever FAQ How much lubricant does the pump hold? The Vertex LT-6 hand lubrication pump holds 350 cm³, providing extended service intervals before refilling is required. What is the maximum delivery pressure of the pump? The LT-6 delivers up to 15 kg/cm², which is suitable for the controlled application of high-viscosity greases. Is the LT-6 suitable for general workshop maintenance? Yes, the Vertex LT-6 lever-operated pump is designed for workshop lubrication tasks and supports consistent, manual dispensing of greases and oils. How should the pump be maintained? Regular checks of the LT-6 reservoir level and a wipe-down of external surfaces are recommended; replace seals if leakage is observed and keep the lever mechanism free of debris. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
350mm Hydraulic Machine Vice Extra-Large Opening 4,500 kgf Clamping Force, Cast Iron 159x618x156mm - Vertex
Achieve reliable, repeatable clamping with the combination of 4,500 kgf clamping force, an extra-large 0–350 mm jaw opening and a vibration-damping cast-iron body; order the unit directly via Metav Werkzeuge or contact our consultants for application advice. Hydraulic machine vice VMCH-6 — 4,500 kgf clamping force, 0–350 mm opening (Vertex) The Hydraulic machine vice VMCH-6 is a hydraulically operated clamping device designed for industrial machining and workshop use, offering an extra-large jaw opening for oversized components. 4,500 kgf clamping force for heavy work Extra-large 0–350 mm jaw opening Cast-iron body for long-term stability Precision tolerance 0.01 mm Secure hydraulic clamping for heavy machining The VMCH-6 uses a hydraulic actuation system to deliver a steady 4,500 kgf of clamping force, which ensures workpieces remain fixed under heavy cutting loads. Hydraulic clamping produces a consistent pressure curve compared with manual or mechanical vises; this reduces micro-movement during roughing and finishing operations and improves tool life. The robust actuation also lowers operator variability, making the unit suitable for repeat production runs where consistent clamping pressure matters. Wide opening and stable construction for large workpieces A jaw opening of 0–350 mm allows the vice to accommodate larger components or fixtures that would not fit standard machines, extending the vice’s applicability across milling and drilling tasks. The body is manufactured from cast-iron, a material selected for its excellent damping properties and dimensional stability; its mass (approx. 63.5 kg) helps absorb cutting forces and reduces chatter, delivering a steadier machining process. The compact overall dimensions support installation on a range of machine tables while still providing a large usable throat. High repeatability and machining precision The clamping system is specified to an accuracy of 0.01 mm, a level of repeatability that supports precision milling and fine finishing operations. Such tolerance is critical when the same clamping reference must be used across multiple setups or when interchangeable fixturing is required. The vice’s repeatable performance reduces setup time between batches and contributes directly to quality assurance in small-series and production environments. Built for workshop efficiency and long service life Hydraulic operation minimises manual effort during clamping and unclamping, speeding up cycle times without compromising holding power. The combination of sturdy construction and straightforward mechanical layout keeps routine maintenance simple and predictable, supporting continuous operation on production lines. Designed as a professional clamping solution, the unit pairs well with machining centres and jigs where durability and stability are priority requirements. For reliable heavy-duty clamping choose the Vertex VMCH-6 and contact Metav Werkzeuge for a tailored quotation or technical consultation: info@metav-werkzeuge.com, +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data SKU: VMCH-6 GTIN: 4061905090998 Manufacturer: Vertex Facts Clamping force: 4,500 kgf Jaw opening: 0–350 mm Accuracy: 0.01 mm Weight: 63.5 kg Dimensions: 159x618x156 mm Materials and features Material: Cast iron Type: Hydraulic ECLASS: 21020601 ETIM: EC002173 FAQ What clamping force does the vice provide? The vice delivers a clamping force of 4,500 kgf, which makes the VMCH-6 suitable for demanding machining tasks requiring high holding power. What size of workpiece can be accommodated? The jaw opening of 0–350 mm allows the vice to clamp larger components and fixtures that are common in milling, drilling and general machining operations. How precise is the clamping and repeatability? The vice is specified with an accuracy of 0.01 mm, offering the repeatability needed for precision machining and multi‑setup production processes. What is the construction material and how does it affect machining? The body is made from cast iron; this material provides vibration damping and mass stability, which reduces chatter and improves surface finish during cutting. What are the weight and mounting considerations for the vice? The vice weighs approximately 63.5 kg and has overall dimensions of 159x618x156 mm; its mass provides stability but requires an appropriately rated machine table or fixture for secure mounting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
350mm Independent Four-Jaw Chuck 4-T Slotted, 550 rpm, 4-M16 T-Slots - Vertex
Take advantage of the combination of precise, independent clamping and a substantial 350 mm diameter for reliable handling of irregular workpieces; order the chuck directly via Metav Werkzeuge or consult our specialists for application advice. VKC-14 Four‑jaw independent chuck, 350 mm, 550 rpm — Vertex A VKC-14 four‑jaw independent chuck designed for accurate, separate jaw adjustment and secure clamping of eccentric or irregular components on lathes and turning centres. Independent four‑jaw operation for versatile clamping 350 mm nominal clamping diameter Max. speed 550 rpm for medium‑duty turning Secure clamping for non‑standard components The independent four‑jaw chuck principle allows each jaw to be adjusted separately, enabling precise centring of irregular or eccentric parts that cannot be gripped reliably by self‑centering chucks. This operation is particularly useful when workpieces require tailored positioning rather than repeat centring; the result is improved machining accuracy and reduced rework. The substantial 350 mm diameter provides a wide clamping range, while the chuck’s mass and geometry contribute to stable holding during machining. Engineered for productivity on the shop floor With a rated 550 rpm maximum speed, the unit is suited to medium‑duty turning operations where controlled rotational speed and rigidity are essential. The 4‑M16 T‑slots permit secure mounting to a wide range of lathe faces and adaptors, supporting rapid installation and repeatability between setups. Because jaw adjustments are independent, set‑up can be optimised for single, one‑off components, raising throughput in small‑batch production without sacrificing positional control. Stability and longevity where it matters Robust mass and a focus on mechanical stability mean vibration is reduced during cuts, improving surface finish and tool life. The chuck’s substantial weight (53.6 kg) aids damping and contributes to a predictable machining behaviour when paired with appropriately rated spindles. Constructed and supplied under the Vertex name, the component is intended for workshops seeking dependable clamping performance across a range of turning tasks. Order Vertex clamping solutions via Metav Werkzeuge for reliable workshop performance — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for technical advice and ordering. Technical data Article number: VKC-14 GTIN: 4061905087110 Manufacturer: Vertex Nominal diameter: 350 mm Max. speed: 550 rpm Weight: 53.6 kg T‑slots: 4‑M16 Facts eClass: 21020490 SKU: VKC-14 Rotational speed: 550 rpm Diameter: 350 mm Mass: 53.6 kg Special features Independent four‑jaw operation Suitable for irregular and eccentric workpieces 4‑M16 T‑slots for secure mounting Robust mass for improved vibration damping FAQ What types of workpieces are best suited to an independent four‑jaw chuck? An independent four‑jaw chuck such as the VKC-14 by Vertex is ideal for irregular, asymmetric or eccentrically turned components where each jaw requires individual adjustment to achieve accurate clamping. What is the maximum rotational speed for safe operation? The chuck is specified for a maximum speed of 550 rpm; operations should be planned within this limit to maintain safety and machining accuracy. What clamping diameter does the chuck provide? The nominal clamping diameter is 350 mm, offering a broad range for larger turning jobs and non‑standard part dimensions. How is the chuck mounted to a lathe? Mounting is achieved via the supplied T‑slot pattern specified as 4‑M16, allowing secure attachment to compatible faceplates or adaptors. How does the chuck’s mass affect machining stability? At 53.6 kg the chuck provides substantial mass that helps damp vibration during cutting, which can improve surface finish and contribute to more consistent tool performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
353mm Rotary Table Horizontal/Vertical MT-4, 4° Per Spindle Turn, 10" Reading, 130kg/70kg Load, T-Slots 6x16mm - Vertex
Take advantage of the combination of precision indexing, robust load capacity and standard MT-4 compatibility for reliable multi-axis setups; order the unit directly via Metav Werkzeuge or consult Metav’s specialists for application advice. HV-14 Rotary Table (Horizontal/Vertical) by Vertex — 353 mm, MT-4 The HV-14 is a versatile rotary table designed for precise horizontal and vertical indexing in milling and metalworking fixtures. 353 mm precision rotary table MT-4 spindle taper for standard tooling 130 kg horizontal / 70 kg vertical load 6 × 16 mm T-slots for secure fixturing Consistent precision for indexed machining The indexing mechanism delivers a clear and reproducible angular step, with a 4° per spindle revolution setting that simplifies rapid dividing tasks. A fine vernier readout with a 10" division enables more accurate adjustments than coarse indexing alone; this combination reduces rework and shortens cycle setup. For production environments where consistent positioning is essential, the result is fewer tool changes and improved throughput. The construction supports steady rotational motion, ensuring repeatable results even during medium-duty milling or finishing operations. Robust build and stable support for heavier setups Built to withstand demanding workshop conditions, the unit provides a 130 kg horizontal load capacity and 70 kg in vertical orientation, supporting sizeable workpieces and fixtures. The 353 mm table diameter gives a practical working area while the overall footprint of 445 × 389 × 123 mm keeps the assembly compact on the machine table. With a mass of 76.61 kg and a table height of 125 mm, the assembly offers stability that reduces vibration during cutting, which in turn improves surface finish and dimensional consistency on machined parts. Standard interfaces and flexible fixturing Equipped with an MT-4 spindle taper for direct compatibility with common tooling and a set of 6 × 16 mm T-slots, the table accepts standard clamps and modular fixtures without the need for custom adapters. The horizontal/vertical capability expands the range of operations from angular milling to rotary indexing and light-angle cutting. Integration into existing milling centres is straightforward, providing a practical way to increase capability without extensive re-engineering of the machine setup. The combination of recognised interface standards and secure clamping features supports fast changeovers and reliable repeatability. Contact Metav Werkzeuge for tailored advice on integrating the Vertex HV-14 rotary table into production and to arrange reliable supply from Emmerich. Technical data SKU: HV-14 GTIN: 4061905089466 Manufacturer: Vertex ECLASS: 36600610 Facts Table diameter: 353 mm Overall dimensions: 445 × 389 × 123 mm Height: 125 mm Weight: 76.61 kg Max load horizontal: 130 kg Max load vertical: 70 kg Spindle indexing per rotation: 4° Readout division: 10" T-slots: 6 × 16 mm Special features Horizontal/vertical operation MT-4 spindle taper 6 × 16 mm T-slots for fixturing Compact footprint for machine tables FAQ What maximum workpiece weight can the rotary table support horizontally? The Vertex HV-14 rotary table supports up to 130 kg in the horizontal position, suitable for medium-weight fixtures and workpieces. Is the table suitable for vertical mounting on a milling machine? Yes, the unit is designed for both horizontal and vertical use and carries a vertical load rating of 70 kg when mounted accordingly. Which spindle taper is provided for tooling connection? The table is supplied with an MT-4 spindle taper, allowing direct use of common Morse-taper tooling and adapters. How fine is the indexing and how is accuracy indicated? Indexing is driven at 4° per spindle revolution, with a vernier readout providing a 10" division for finer adjustment during set-up. What options are available for clamping the workpiece? The table features 6 × 16 mm T-slots, which accept standard clamps and modular fixturing systems for secure workholding. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
355mm Chuck 4,500 kgf Clamping Force, 0.03mm Accuracy, 1,500 rpm - Vertex
Combine high clamping force, tight accuracy and substantial mass for reliable workholding in demanding turning operations. Order the VSK-14 directly via Metav Werkzeuge or ask our consultants if needed. VSK-14 – 355 mm heavy-duty lathe chuck with 4500 kgf clamping force (Vertex) VSK-14 is a robust clamping chuck designed for secure workholding on medium to large turning and machining operations, offering high stability and consistent performance. 355 mm diameter for large workpieces High precision: 0.03 mm runout 4500 kgf clamping force Robust 60.7 kg weight for stability Secure, stable workholding for larger components The chuck delivers a combination of high clamping force and mass that reduces vibration and improves surface finish during machining. A 355 mm clamping diameter accommodates larger blanks and long workpieces while the substantial 60.7 kg body contributes to low dynamic displacement under load. For production environments where repeatability and stability are crucial, this configuration minimises rework and tool wear, translating into measurable efficiency gains on the shop floor. Precision that supports tight tolerances With an indicated runout of 0.03 mm, the component is engineered to maintain concentricity at the workpiece interface. Runout refers to the radial deviation during rotation; low values mean components are presented to the cutting tool more accurately, reducing the need for manual adjustment. The permitted operating speed of 1500 r.p.m. balances machining throughput with mechanical safety and precision, ensuring dimensional consistency across batches and allowing predictable cycle times in production planning. Built for dependable workshop operation The device is tailored to heavy-duty turning contexts and benefits from a design that prioritises mechanical resilience and balanced mass distribution. The 4500 kgf clamping force secures parts even under aggressive cutting conditions, improving process reliability and worker confidence. As a Vertex-manufactured chuck, the unit integrates with standard lathe interfaces and is suitable for continuous workshop use where a combination of endurance and precision matters most. Arrange specification support and order coordination with Metav Werkzeuge to integrate the Vertex VSK-14 into production workflows or request bespoke advice from our specialists in Emmerich Technical data SKU: VSK-14 GTIN: 4061905096082 Manufacturer: Vertex Core specifications Diameter: 355 mm Accuracy: 0.03 mm Maximum speed: 1500 r.p.m. Weight: 60.7 kg Clamping force: 4500 kgf Special features Heavy-duty lathe chuck design Suitable for medium to large workpieces Balanced mass for machining stability Image asset: VSK-4-main.png FAQ Is the chuck suitable for large-diameter turning work? The VSK-14 is specified with a 355 mm diameter and is designed for medium to large turning operations, making it suitable for larger components. What level of runout can be expected in operation? An accuracy of 0.03 mm runout is specified for the chuck, providing the precision required for tight tolerance machining. What maximum speed is recommended for safe use? The device is rated for operation up to 1500 r.p.m., a balance between machining speed and stable clamping performance. How strong is the clamping action and what does it mean for machining? The chuck delivers 4500 kgf of clamping force, which secures workpieces during heavy cuts and reduces the likelihood of part movement under load. Does the VSK-14 require special mounting or adapters? Mounting depends on the lathe spindle interface; the VSK-14 is a Vertex clamping chuck and compatibility should be confirmed against spindle specifications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
355mm Three-Point Lathe Chuck, 4500 kgf Clamping Force, 1500 rpm Speed - Vertex
Secure productivity and consistent accuracy with 4500 kgf clamping force and runout ≤ 0.03 mm, engineered for large workpieces up to Ø 355 mm. Order the VSC-14 three-jaw chuck directly via Metav Werkzeuge or ask our consultants if needed. VSC-14 three-jaw chuck (Ø 355 mm) – 4500 kgf clamping force, 1500 r.p.m. A VSC-14 three-jaw chuck built for robust workholding on medium-to-large turning centres and machining applications. Three-jaw design for concentric clamping Diameter 355 mm for large workpieces Clamping force 4500 kgf for secure hold Max speed 1500 r.p.m., runout ≤ 0.03 mm Stable clamping that improves cycle reliability The three-jaw configuration delivers a balanced hold that reduces vibration and secures components during machining, translating into fewer rejects and more predictable cycle times. The combination of 4500 kgf clamping force and a design optimised for concentric grip means heavy parts stay immobile under cutting loads, which supports higher metal removal rates and consistent surface quality. For production environments where uptime matters, the mechanical stability of this workholding solution contributes directly to throughput and cost-efficiency. Precision that lowers rework and inspection time Runout is a decisive factor for concentric turning and finishing operations. With measured runout of ≤ 0.03 mm, the chuck supports tight tolerances and repeatable part geometry, reducing the need for secondary alignment and correction. By keeping deviation minimal, inspection cycles can be streamlined and scrap rates lowered. This measurable precision is particularly relevant for batches where dimensional conformity is critical and inspection effort directly impacts unit cost. Engineered for safe high-speed machining A rated maximum speed of 1500 r.p.m. pairs with the chuck’s robust clamping characteristics to allow confident use at elevated spindle speeds where appropriate. The specification balances rotational performance with mechanical integrity, enabling faster spindle programmes without compromising grip. The three-jaw form factor also simplifies centring of cylindrical parts, which in turn reduces setup time and supports repeatable production runs on lathes and turn-mill centres. Integration and practical benefits on the shop floor Installation and commissioning are straightforward when adapting existing mounting interfaces; the chuck’s clear diameter and mechanical data make process planning transparent. The design reduces the number of individual adjustments needed during changeover, so line operators spend less time on set-up and more time on productive machining. Where operators are less experienced, the chuck’s inherent self-centring helps maintain part accuracy and reduces dependence on manual alignment skills. Contact Metav Werkzeuge today to arrange procurement of the VSC-14 three-jaw chuck for improved throughput and reliable clamping; Metav’s specialists in Emmerich can advise on compatibility and delivery to the workshop Technical Data SKU: VSC-14 GTIN: 4061905086823 eClass: 21020590 Manufacturer: Vertex Facts Diameter: 355 mm Clamping force: 4500 kgf Maximum speed: 1500 r.p.m. Runout / accuracy: 0.03 mm Special features Three-jaw configuration Designed for concentric clamping Technical drawing and product images available FAQ What types of machines is this chuck suited for? The VSC-14 three-jaw chuck is suited for lathes and turn‑mill centres where a concentric, robust hold is required; its Ø 355 mm size addresses medium-to-large workpieces. How does the clamping force affect machining performance? A clamping force of 4500 kgf ensures stable grip under cutting loads, reducing chatter and allowing more aggressive feed rates with the VSC-14 three-jaw chuck. What tolerance can be expected in concentricity? Typical runout is ≤ 0.03 mm, which supports tight dimensional control and lowers the need for corrective passes or extensive inspection. Is the maximum speed suitable for hard turning operations? The rated maximum of 1500 r.p.m. permits efficient turning cycles; compatibility with hard turning depends on the machine and tooling combination rather than the chuck alone. Can the chuck handle asymmetric or irregular parts? The three-jaw design is optimised for round or near-round components; for highly irregular geometries, alternative clamping solutions may be more appropriate. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
35mm Clamping Screw M12 For Clamping Ø27mm, L22mm K8mm - TECWERK
Compact M12 thread and compliance with DIN 6367 combine to provide dependable clamping for a 27 mm toolholder; take advantage of the compact 22 mm length and 35 mm head for secure seating. Order this TECWERK component directly via Metav Werkzeuge or consult our specialists for fit verification. TECWERK M12 milling clamping screw – compact M12 thread for 27 mm clamping diameters The TECWERK M12 milling clamping screw serves as a compact draw-in screw for milling toolholders and clamping systems, optimised for applications with a clamping diameter of 27 mm M12 thread for standard toolholders Designed for clamping Ø 27 mm Overall length 22 mm, head Ø 35 mm DIN 6367 conformity Consistent clamping performance for accurate machining A precise M12 thread combined with conformity to DIN 6367 ensures repeatable seating and predictable force transmission, which is crucial for milling operations that demand positional accuracy. The screw’s geometry supports consistent axial pull and stable contact between the tool and holder, reducing micro‑movement during cuts. This results in improved surface finish and tool life, as fewer compensatory adjustments are required during set‑up. The standardised specification also simplifies inventory planning in production environments where interchangeability and traceable components are essential. Faster set-up and less downtime through compact dimensions With an overall length of 22 mm and a head diameter of 35 mm (head height K 8 mm), the component is designed for compact assemblies and tight tool pockets. The short shank minimises protrusion into the toolholder, enabling quicker insertion and removal while maintaining a secure clamp. For workshops that cycle tools frequently, these dimensions translate into measurable time savings at every tool change and fewer obstructions during handling and storage, supporting leaner workflows and higher machine uptime. Industrial compatibility and reduced sourcing complexity Specification to an established standard makes the screw suitable for a broad range of holders and milling systems that accept an M12 draw-in element and a 27 mm clamping interface. The standardised profile facilitates cross‑brand compatibility and reduces the risk of procurement errors in mixed fleets. Where standardisation is part of a quality strategy, the use of DIN‑compliant components simplifies documentation and quality audits while supporting consistent assembly procedures across departments. Practical applications and workshop recommendations This clamping screw is aimed at industrial workshops, tool rooms and maintenance departments that require compact, standardised fastening for milling toolholders with a 27 mm clamping diameter. Given the absence of material data in the specification, compatibility checks with existing holders and any surface‑treatment requirements should be confirmed before installation. For bespoke toolrooms or retrofit projects, selecting a DIN‑specified fastening element like this one reduces the need for custom adaptations and helps maintain reliable clamping under routine operational stresses. For compatibility checks or to secure the correct TECWERK M12 component for a 27 mm toolholder, contact Metav Werkzeuge for tailored advice and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000834074NW Product: Milling clamping screw Manufacturer: TECWERK Core data Thread: M12 Suitable for clamping diameter: 27 mm Overall length (L): 22 mm Head diameter (D): 35 mm Head height (K): 8 mm Pack unit: 1 Special features Conforms to DIN 6367 Compact design for confined tool pockets FAQ What thread does the clamping screw use? The clamping screw uses an M12 thread as specified for the TECWERK milling clamping screw (SKU 2000834074NW). Which clamping diameter is the screw intended for? The component is specified for a clamping diameter of 27 mm, matching standard toolholders that accept this interface. What are the key dimensions to check before installation? Check the overall length 22 mm, head diameter 35 mm and head height K 8 mm to ensure clearance and correct seating in the holder. Does the screw meet an industrial standard? Yes, the screw is manufactured to DIN 6367, supporting interchangeability and documented quality requirements. Is material information provided for corrosion or lubrication considerations? Material is not specified in the provided data; it is recommended to confirm material and surface treatment requirements prior to use. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
35mm Face Clamping Chuck Weldon 10mm Collet, DIN 69871 Form AD/B, SK40 50mm - TECWERK
Take advantage of a DIN 69871-compliant SK40 interface, central coolant supply and a secure Weldon lateral drive to reduce tool change times and improve process reliability; order the face clamping chuck directly via Metav Werkzeuge or consult our specialists for application advice. Face clamping chuck DIN 69871 AD/B — Weldon drive, central coolant, SK40 The Face clamping chuck DIN 69871 AD/B is a SK40 taper tool holder designed for secure clamping of tools with a 10 mm shank and for use in machining centres that require DIN-standard tool interfaces. DIN 69871 AD/B compatibility Central coolant supply with re-sealable channels Weldon drive for secure lateral tool retention Suitable for 10 mm tool shank, SK40 taper Reliable interface for uninterrupted machining The holder provides a DIN 69871 interface with a steep taper to ensure repeatable seating and high concentricity. The combination of the SK40 taper and a Weldon lateral drive creates a robust mechanical connection that resists axial and radial forces during milling and drilling. The internal bore tolerance H4 guarantees tight concentricity for reduced run-out, which translates into longer tool life and improved surface finish. For production environments this means fewer stoppages and more consistent part quality, making the arbor an efficient choice for repetitive operations. Targeted coolant delivery to extend tool life Equipped with a central coolant supply and re-sealable coolant channels at the flange, the arbor directs cutting fluid precisely to the tool interface. Side coolant channels accommodate tools with a cylindrical shank and lateral drive according to DIN 1835-B, improving chip evacuation and thermal control at the cutting edge. The result is reduced heat-related wear and longer intervals between tool replacements, which lowers consumable costs and maintains cutting performance under prolonged cycles. Compact dimensions for straightforward integration The face clamping chuck features a flange diameter D: 35 mm and a projection A: 50 mm, with a clamping diameter of 10 mm and bore tolerance H4 for reliable tool retention. The compact geometry simplifies integration into existing SK40 spindles and keeps tool overhang to a minimum, helping to reduce vibration and improve accuracy. Manufactured to recognised standards, the holder is suited for workshops and production lines seeking a standardised, low-maintenance toolholding solution that supports predictable machining outcomes. For DIN-standard toolholding from TECWERK with integrated coolant management, contact Metav Werkzeuge for tailored advice and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000833771NW Product type: Face clamping chuck Brand: TECWERK Standard: DIN 69871 Form AD/B Facts Diameter D: 35 mm Clamping diameter: 10 mm Projection A: 50 mm Bore tolerance: H4 Special features Weldon lateral drive for tool take-up Central coolant supply Re-sealable coolant channels at the flange Side coolant channels for cylindrical shank tools per DIN 1835-B FAQ What spindle taper does the chuck use? The chuck is supplied as a SK40 taper according to DIN 69871 AD/B, making it compatible with machines that accept this interface. Which tool shank diameter is supported? This TECWERK face clamping chuck is specified for a 10 mm clamping diameter and a bore tolerance of H4 for precise seating. Does the holder provide coolant to the cutting zone? Yes. The arbor features a central coolant supply plus re-sealable channels and side coolant ports to target fluid to the tool and improve chip evacuation. Is this chuck suitable for tools with a Weldon shank? The holder includes a Weldon lateral drive and is designed to accept tools with a lateral drive surface in accordance with DIN 1835-B, ensuring positive torque transmission. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com