Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
36° 20W Halogen Task Lamp Wide Beam IP20 AC 220V - Vertex
Reliable workshop illumination with a wide beam and precise positioning: the combination of 20 W halogen output, a 500 mm arm and IP20 protection ensures steady, shadow‑reduced lighting for inspection and assembly. Order the VHL-50FT directly via Metav Werkzeuge or consult our technical advisers for application guidance. VHL-50FT – Vertex workshop lamp, 20 W halogen, 500 mm arm The VHL-50FT is a compact workshop lamp with a wide 36° beam, designed to provide consistent, high‑contrast illumination for inspection, fine assembly and bench work in indoor workshop environments. 20 W halogen illumination Wide 36° beam angle 500 mm adjustable arm IP20 protection for indoor use Consistent, high‑contrast illumination for inspection and testing The lamp uses a halogen light source at 20 W, offering a continuous spectral output that supports accurate visual inspection and colour judgement where precise detail matters. The wide 36° beam reduces deep shadows and provides an even light field across small assemblies and measuring setups. For quality control and assembly benches, this translates into fewer visual errors and a more efficient inspection process, since parts and markings remain clearly visible under steady, non‑flickering light. Accurate positioning and ergonomic handling for repetitive tasks An articulated mounting arrangement with a 500 mm arm allows careful positioning of the light over the workpiece, improving task ergonomics and repeatability in production routines. At a compact mass of 1.69 kg, the unit remains easy to move and re‑aim while maintaining stability once set. The lamp operates from AC 220 V, matching standard workshop supplies and integrating smoothly into existing benches and test rigs without additional power conditioning. Built for workshop continuity and dependable sourcing Designed for indoor workshop use with IP20 ingress protection, the device is intended to provide reliable service in controlled environments such as inspection benches, electronics assembly and precision tooling areas. Supplied under the Vertex name, the VHL‑50FT benefits from established manufacturing practices and can be procured through Metav as a trusted European distribution partner. Metav’s logistical presence in Emmerich supports consistent availability and application advice, helping to keep production lines and inspection stations running with minimal downtime. Contact Metav Werkzeuge for tailored application advice or to arrange delivery of the Vertex VHL-50FT from our Emmerich warehouse Technical Data Article number: VHL-50FT GTIN: 4061905084560 Brand: Vertex Facts Weight: 1.69 kg Arm length: 500 mm Beam angle: 36° Light power: 20 W (halogen) Light temperature: 28000 K Supply voltage: AC 220 V Special features Halogen light source Wide beam for reduced shadowing IP20 protection — indoor use Compact, bench‑oriented design FAQ What type of light source does this lamp use? The VHL-50FT uses a 20 W halogen lamp, chosen for its continuous spectrum and consistent output for inspection tasks. Is the VHL-50FT suitable for outdoor or wet environments? No. The lamp has IP20 protection, which is intended for indoor workshop use and does not provide protection against water ingress. How far can the lamp be positioned from the workpiece? Positioning is supported by a 500 mm arm that allows precise placement over the work area; the VHL-50FT’s reach is intended for benches and close inspection setups. What supply voltage is required for this unit? The device operates on AC 220 V, compatible with standard workshop mains. Which applications benefit most from this lamp? Inspection, fine assembly and detailed bench work in workshops and production cells benefit from the VHL-50FT’s wide beam and consistent halogen illumination. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3700N Holding Force 2500N Thrust Rod Clamp Horizontal Base Zinc Plated Cast Body - Kukamet
Take advantage of the combination of compact design, 2,500 N pressing force and a zinc-plated cast body for reliable fixture performance; order the clamp directly via Metav Werkzeuge or contact our consultants for specification advice. Push‑rod clamp 532 — horizontal foot, 2.5 kN pressing force (Kukamet) The Push‑rod clamp 532 is a compact push‑rod clamping element for fixture and workholding applications, engineered for horizontal‑foot mounting and reliable repetitive operation. Kukamet push‑rod clamp 532 Horizontal‑foot mounting for stable fixing 2,500 N pressing force for secure clamping Zinc‑plated cast body for corrosion resistance Secure hold for production and jigging The clamp delivers a pressing force of 2,500 N and a holding force of 3,700 N, values that are decisive for dependable positioning and stability during machining or assembly cycles. The 12 mm piston diameter concentrates force with a compact footprint, making the unit suitable where space is limited but consistent clamping is required. Built to provide reproducible contact pressure, the device reduces cycle variability and supports efficient downstream processing through stable workpiece retention. Fast integration and reduced setup time Fitted with a horizontal foot and a pressure spindle sized M8x50, the component is designed for straightforward attachment to standard fixture plates and compatible bases. The clamp’s low mass (0.59 kg) simplifies handling during jig assembly and limits additional load on moving fixtures. As a result, set‑up time is shortened and fixtures can be modified or reconfigured with minimal effort, improving machine availability and contributing to leaner production flows. Durable construction for long service life A zinc‑plated cast body combines mechanical strength with corrosion protection, ensuring the clamping element withstands workshop conditions and routine handling. Surfaces are treated to resist wear and environmental influence, so maintenance intervals are extended and replacement cycles are reduced. The straightforward mechanical design supports uncomplicated inspection and servicing; common adjustments can be made without specialist tools, supporting a dependable, low‑effort maintenance routine. Contact Metav Werkzeuge today for detailed technical guidance, compatibility checks or a tailored quotation for the Kukamet push‑rod clamp 532 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 532-3-Q12 GTIN: 8680731504446 Manufacturer: Kukamet Facts Pressing force max: 2,500 N Holding force max: 3,700 N Piston diameter: 12 mm Weight: 0.59 kg Pressure spindle: M8x50 eClass: 21041716 ETIM: EC011973 Materials and features Material: zinc‑plated with cast body Mounting: horizontal foot Category: Spanner Story trigger: lever clamp FAQ What maximum clamping and holding forces does the clamp provide? The clamp provides a maximum pressing force of 2,500 N and a holding force of 3,700 N, as specified for the Kukamet push‑rod clamp 532 (SKU 532-3-Q12). How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the unit is delivered for horizontal‑foot installation and is compatible with standard fixture plates using the M8x50 pressure spindle. What is the weight and how does it affect fixture design? The unit weighs 0.59 kg, which minimises added mass to moving assemblies and simplifies manual handling during fixture assembly. Is the clamp suitable for harsh workshop conditions? The clamp’s zinc‑plated cast body provides corrosion resistance and mechanical robustness, supporting reliable operation in typical workshop environments. How large is the piston and why does this matter? The piston diameter is 12 mm, which concentrates clamping force in a compact form and contributes to consistent contact pressure across repeated cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3700N Three-Point Push Rod Clamp Horizontal Foot, 3500N Thrust, Black Oxide - Kukamet
Take advantage of a compact clamp that combines 3,500 N clamping force, a 3,700 N holding capacity and a corrosion-resistant black blued finish for reliable fixture performance; order the push-rod clamp directly via Metav Werkzeuge or consult their specialists for fitment advice. Push-rod clamp 511 (B511-5) – horizontal-foot, 3,500 N clamping force (Kukamet) The Push-rod clamp 511 is a compact horizontal-foot clamp designed for secure workpiece fixation in jigs, fixtures and assembly stations where repeatable clamping and simple integration are required Horizontal-foot mounting for stable fixture integration Clamping force up to 3,500 N for secure fixation Holding force 3,700 N for retention under load Black blued finish for corrosion resistance High clamping performance for consistent production results The compact design delivers a defined clamping force of 3,500 N, providing the power needed to keep components immobilised during machining or assembly. The higher holding force of 3,700 N indicates the clamp’s retention capability when lateral or vibrational loads occur. Specified forces are given as objective measures to support fixture calculation and ensure process reliability. The lightweight construction at 0.96 kg keeps the total fixture mass low, aiding dynamic tooling setups and reducing strain on adjustable mounts. Easy mounting and predictable adjustment speed up setup With a horizontal foot for fast bed attachment and an M10x70 pressure spindle, the unit integrates into standard fixture plates and allows fine preloading of the workpiece. The spindle thread size and length support controlled contact pressure and repeatable clamp positioning; this reduces cycle-time variability and simplifies repeat setups. The clamp’s push‑rod mechanism converts operator or actuator movement into a linear clamping action, making it suitable for both manual fixtures and automated transfer lines. Robust finish and compact form for long service life Surface protection in a black blued treatment resists corrosion in workshop environments and helps maintain sliding surfaces and contact geometry. The unit’s compact footprint and straightforward kinematics reduce potential snag points and ease maintenance intervals. Constructed for routine industrial use, the device offers a balance of durability and serviceability that supports long-term, low-maintenance operation in production and assembly areas. Versatile use across jigs, fixtures and assembly aids Designed as a straightforward clamping element for general-purpose fixtures, the model suits assembly jigs, testing rigs and light machining fixtures where controlled linear force is required. The push-rod layout provides a direct clamping motion that can be paired with locating pins or stops to create reproducible positioning. For integrators and maintenance teams the clear numerical data allow rapid assessment of suitability for specific workpiece geometries and load cases; the B511-5 name appears on technical drawings and bill of materials for unambiguous component identification. Contact Metav Werkzeuge for specialist advice on integrating the Kukamet B511-5 push-rod clamp into existing fixtures and for supply direct from Emmerich via eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: B511-5 GTIN: 8680731503883 Manufacturer SKU: B511-5 Facts Clamping force (max): 3,500 N Holding force (max): 3,700 N Weight: 0.96 kg Pressure spindle: M10x70 Mounting: horizontal foot Special features Finish: black blued Mounting type: waagerechter Fuß (horizontal foot) Category: Spanner ETIM: EC011973 eCl@ss: 21041716 FAQ What maximum clamping force does the clamp provide? The clamp delivers a clamping force of 3,500 N, with an indicated holding capacity of 3,700 N, making it suitable for secure fixation in many jig and fixture applications. Can the clamp be mounted to standard fixture plates? Yes, the clamp uses a horizontal foot for direct attachment to fixture plates and includes an M10x70 pressure spindle for adjustment and preloading. What surface treatment does the unit have and why does it matter? The component has a black blued finish which reduces corrosion and helps preserve moving and contact surfaces in workshop conditions. Is the clamp suitable for automated systems? The push‑rod kinematics and compact mass (approx. 0.96 kg) allow integration with manual and automated fixtures where linear clamping action is required. Which model designation should be used in documentation? Use the designation B511-5 or the description Kukamet push-rod clamp 511 for bills of material and assembly drawings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
370mm 3 W LED Worklight Wide Beam 45° Angle IP54 AC 100V–240V - Vertex
Benefit from the combination of a wide 45° beam, 3 W LED efficiency and IP54 protection for dependable workshop illumination and low running costs; order directly via Metav Werkzeuge or consult our advisors for tailored advice. VHL-37FT workshop lamp — wide-beam, energy-efficient illumination (Vertex) The VHL-37FT is a compact workshop lamp designed for broad-area task lighting; it combines a low-power LED source with a flexible mounting arm for organised, glare‑reduced workspaces. 3 W LED for energy-efficient illumination Wide 45° beam for broad coverage IP54 splash and dust resistance Flexible 370 mm arm, lightweight 0.6 kg Precise, low-power lighting that supports inspection and assembly The fixture uses a 3 W LED light source to deliver focused task illumination while keeping power consumption to a minimum. The very high 57,000 K light temperature produces a cool, high‑contrast appearance that makes fine details stand out during visual inspection and assembly tasks. The wide 45° beam distributes light evenly across benches or workstations, reducing the need for frequent repositioning and improving productivity during repetitive tasks. Built‑in LED technology also means low maintenance and a long service life compared with filament lamps, which supports continuous operation in production environments. Robust design for workshop conditions and flexible positioning Designed for practical workshop use, the lamp offers IP54 protection, which signifies reliable resistance to dust ingress and splashing water—suitable for environments with occasional coolant or cleaning spray. The articulated 370 mm arm enables precise positioning over the work area, while the unit’s 0.6 kg weight keeps the assembly lightweight and easy to mount where space is limited. The wide voltage acceptance of AC 100V–240V allows the lamp to be used with standard mains supplies across different sites without specialised transformers or adapters, facilitating quick integration into existing setups. Practical advantages that reduce downtime and support quality work The combination of a compact LED head, robust protection class and flexible arm reduces setup time and the frequency of lamp replacement, contributing to uninterrupted workflows. The lamp’s characteristics favour tasks requiring sustained visual focus such as measurement, component inspection and small-part assembly; the LED light maintains consistent output without warm‑up delay. Distribution through Metav Werkzeuge ensures availability via a European quality filter and dependable logistics, so workshop planners and purchasing departments can rely on consistent supply and transparent order handling. Contact Metav Werkzeuge in Emmerich for a procurement consultation or to discuss how the Vertex VHL-37FT can be integrated into existing workstations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: VHL-37FT GTIN: 4061905088209 Manufacturer: Vertex Key specifications Power: 3 W (LED) Light temperature: 57,000 K Beam angle: 45° Arm length: 370 mm Weight: 0.6 kg Supply voltage: AC 100V–240V IP rating: IP54 Materials and features Wide light beam for broad coverage Splash and dust resistant (IP54) Lightweight, flexible arm for positioning FAQ Is the VHL-37FT suitable for use in damp workshop environments? The VHL-37FT has an IP54 rating, which provides protection against dust and splashing water and makes it suitable for typical workshop conditions where occasional splashes occur, but it is not intended for continuous outdoor exposure in heavy rain. What are the electrical requirements for the lamp? The lamp accepts AC 100V–240V, enabling operation from standard mains supplies without additional voltage conversion equipment. What kind of light does the fixture produce and how does it affect visibility? With a 3 W LED and a high colour temperature of 57,000 K, the light is very cool and high in contrast, aiding the visual detection of fine details during inspection and assembly operations. How easy is it to position the light over the workpiece? The lamp features a 370 mm articulated arm and a wide 45° beam, which together allow comfortable, precise positioning to illuminate benches, jigs or inspection areas. What is the weight of the unit and does it require heavy mounting hardware? The unit weighs 0.6 kg, making it lightweight and straightforward to position; specific mounting accessories are not detailed in the product data. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
370mm Three-Point Self-Centre Low-Profile 3-Jaw Lathe Chuck 3670 kgf Clamping Force - Vertex
Take advantage of the combination of self-centring accuracy, an extra-flat profile and a robust clamping force to keep turning operations productive and stable; order the chuck directly via Metav Werkzeuge or request advice from our consultants. VNBK-12 — 3-jaw self-centring lathe chuck, extra-flat, 370 mm (Vertex) A VNBK-12 is a self-centring, extra-flat 3-jaw lathe chuck designed for secure clamping of larger workpieces in heavy-duty turning applications. Self-centring 3-jaw design Extra-flat profile for reduced overhang 370 mm diameter for larger workpieces High clamping force 3,670 kgf Consistent clamping for repeatable parts The self-centring mechanism ensures fast, reliable engagement of the jaws and contributes to high repeatability across series runs. With a focus on dependable performance, this chuck minimises set-up variation so that machining tolerances are easier to maintain. The design supports efficient production flows by reducing time spent on manual centring and alignment, delivering a measurable increase in process stability. Reduced overhang for improved rigidity The extra-flat profile reduces the distance between the workpiece and the spindle centre, which directly improves rigidity and vibration behaviour during turning. For operations that require tight concentricity and surface finish, a low-profile chuck decreases bending moments and helps to maintain tool life. This characteristic is particularly beneficial when working with longer or asymmetrical components where cantilever effects can compromise accuracy. Confidence under load with robust clamping A specified clamping force of 3,670 kgf provides secure grip on substantial blanks and machined parts, enabling reliable machining under heavier cutting conditions. The sturdy jaw engagement translates to fewer re-clamps and less downtime for checks, supporting throughput gains in batch production. The chuck’s mechanical principles favour consistent force transmission for repeatable holding, which is essential for demanding turning tasks. Practical integration and workshop advantages With a 370 mm diameter the chuck accommodates larger diameters while remaining practical to install and balance in a typical workshop environment. The combination of compact form and solid mass contributes to predictable dynamic behaviour on medium and large lathes. As a modular clamping solution, it simplifies tooling planning and supports a wide range of turning tasks without frequent fixture changes. Contact Metav Werkzeuge for a specification check and to discuss how the Vertex VNBK-12 self-centring chuck with extra-flat design and 3,670 kgf clamping force fits the workshop requirements; Metav Werkzeuge can advise on compatibility and supply logistics. Technical data SKU: VNBK-12 GTIN: 4061905086311 Diameter: 370 mm Weight: 46.8 kg Clamping force: 3,670 kgf ECLASS: 21020401 Manufacturer: Vertex Core specifications Diameter: 370 mm Weight: 46.8 kg Clamping force: 3,670 kgf ECLASS: 21020401 Features and compatibility Self-centring 3-jaw configuration Extra-flat profile Designed for heavy-duty turning operations Category: Vertex FAQ What is the primary advantage of a self-centring chuck? A self-centring chuck like the Vertex VNBK-12 aligns the jaws simultaneously, reducing set-up time and improving repeatability for batch production. Which workpiece sizes does this chuck support? The chuck provides a 370 mm effective diameter, making it suitable for larger turning operations where a wide gripping range is required. How does the extra-flat design affect machining? The extra-flat profile reduces overhang, increasing rigidity and improving surface finish and dimensional stability during turning. Is the clamping force sufficient for heavy cutting? With a clamping force of 3,670 kgf the VNBK-12 offers secure holding for substantial workpieces and is suitable for demanding cutting conditions. Can this chuck be used on various lathe types? The VNBK-12 is intended for integration on compatible heavy-duty lathes; final suitability should be confirmed against the machine spindle and mounting standard. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
370x750mm Machine Guard Expandable Rubber Back Panel, SKU VGC-3775B - Vertex
Take advantage of the combination of durable rubber construction and an expandable design to protect machine openings and rear-mounted measuring tools while keeping installation simple and load minimal. Benefit from compact dimensions (370 x 750 mm) and a lightweight 0.7 kg body for easy retrofitting on existing equipment. Order the machine guard directly via Metav Werkzeuge or ask our consultants if needed. Machine Guard VGC-3775B – expandable rubber protection, 370 x 750 mm by Vertex A Machine Guard VGC-3775B is an expandable rubber protector designed to shield machine openings and rear-mounted calipers in workshop and industrial production environments. Expandable design for adjustable coverage Durable rubber construction for abrasion resistance Fits 370 x 750 mm openings Rear-side mounting for precision calipers Compact protection that keeps production running The VGC-3775B delivers targeted protection where space is limited: its expandable form adapts to variable gaps while the rubber material absorbs chips and dust without transferring damaging forces to adjacent components. The measured dimensions 370 x 750 mm make the guard suitable for a wide range of machine flanges and access points, and the low weight (0.7 kg) reduces additional load on sliding elements. This combination of compact size and resilient material supports continuous operation by limiting contamination and wear on sensitive surfaces, which in turn contributes to predictable maintenance intervals and reduced downtime. Designed for precision and safe integration Rear-side mounting is provided to accommodate precision calipers and similar indicators without obstructing measurement tasks. The guard’s profile enables secure attachment to machine frames, maintaining necessary clearances for measuring instruments while preventing ingress of swarf and coolant. Where compatibility with measuring equipment is required, the expandable layout ensures the protective element conforms to the geometry of the machine interface, allowing measurement routines to continue with minimal intervention. The straightforward mechanical concept avoids complex fittings and supports consistent measurement conditions. Low-maintenance fit for workshop workflows The choice of rubber as the primary material allows straightforward cleaning and long-term resistance to abrasion from typical workshop debris. Installation is intentionally simple, so retrofitting to existing machines is feasible without extended downtime. Inspection and upkeep are confined to routine checks and occasional cleaning, which keeps lifecycle costs low and preserves machine availability. The guard’s adaptable design also minimises the need for multiple part variants, simplifying spare-part management and inventory control for maintenance teams. A reliable component from established partners Specified and supplied by Vertex, this machine guard aligns with the practical demands of industrial operations and precision workshops. As part of a considered equipment strategy, the guard supports the democratisation of precision by protecting measurement setups and machine openings, enabling consistent quality in daily production. Metav Werkzeuge acts as the local supply and advisory point in Europe, providing a quality filter and logistical proximity for procurement and technical guidance. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex Machine Guard VGC-3775B, including compatibility checks and delivery options; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VGC-3775B GTIN: 4061905091346 Manufacturer: Vertex Core specifications Dimensions: 370 x 750 mm Weight: 0.7 kg Materials & features Material: Rubber Expandable design Rear-side mount for precision calipers ECLASS: 24322502 FAQ What material is the guard made from? The Machine Guard VGC-3775B is manufactured from rubber, chosen for flexibility and abrasion resistance suitable for workshop environments. Can the guard be used with precision calipers? Yes. The VGC-3775B supports rear-side mounting to accommodate precision calipers and similar measuring devices without impeding access. What are the dimensions and weight of the guard? Dimensions are 370 x 750 mm and the unit weighs 0.7 kg, allowing compact installation with minimal added load. Is the design adjustable to different gap sizes? The guard features an expandable design that adapts to varying opening sizes, providing coverage across a range of machine interfaces. Who supplies this machine guard? This machine guard is supplied by Vertex and distributed via Metav Werkzeuge; the item is listed under SKU VGC-3775B. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
373x355x45mm Base For Vertex VHT Vises - Vertex
Take advantage of a robust, heavy base that improves machining stability and reduces rework: the combination of stable mounting, substantial mass and clear dimensions supports consistent production quality. Order the HS-8 base directly via Metav Werkzeuge or consult our product advisors for integration guidance. HS-8 — Base for Vertex VHT vises, stable mounting platform (373 x 355 x 45 mm) A base for Vertex VHT vises (HS-8) designed to provide a rigid, vibration-damping mounting surface for bench vises in workshop and light industrial settings. Stable mounting for Vertex VHT vises Dimensions 373 x 355 x 45 mm 16 kg mass for vibration damping Suited to standard workshop benches Precision immobility for machining tasks A heavy, stable foundation reduces unwanted movement during clamping and machining. The substantial 16 kg mass provides effective vibration damping, which directly benefits surface finish and repeatability when using a bench vise. By stabilising the clamped workpiece, tool wear is reduced and cycle-to-cycle variation is minimised, enabling more consistent results on finishing and measuring operations. This base is therefore a practical measure to increase process reliability on small-batch or bespoke assemblies. Clear specification for straightforward integration The clearly stated dimensions of 373 x 355 x 45 mm allow rapid assessment of bench space and mounting compatibility. The compact footprint suits typical workshop benches while offering enough surface area for secure attachment of a bench vise. Designed specifically for the Vertex VHT series, the base streamlines installation and avoids the need for custom adapters, which shortens setup time and simplifies machine layout planning in production cells or repair benches. Improved productivity through reduced rework Greater stability during clamping lowers the incidence of chatter and misalignment, so fewer parts require rework or adjustment. The resulting improvement in first-pass quality translates into saved labour hours and fewer interrupted workflows. In practical terms, investing in a robust mounting base contributes to steady throughput and predictable manufacturing outcomes, supporting tighter tolerances without introducing complex process changes. Proven supply and workshop readiness The HS-8 base is provided through a supplier network that emphasises dependable delivery and consistent product standards. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a broad product range to keep workshops supplied. With a portfolio built to serve industry, craft and trade, the emphasis is on practical, verifiable solutions that fit into established workshop routines and procurement channels. Contact Metav Werkzeuge to discuss the HS-8 base for Vertex VHT vises and arrange delivery or technical clarification from our specialists in Emmerich Technical Data Article number: HS-8 GTIN: 4061905092909 ECLASS: 21029106 Facts Dimensions: 373 x 355 x 45 mm Weight: 16 kg Special features For Vertex VHT vises SKU: HS-8 FAQ What is the primary purpose of this base? The HS-8 base for Vertex VHT vises provides a rigid, vibration-damping mounting surface to improve clamping stability and machining repeatability. Are the exact mounting holes and pattern specified? Mounting hole details are not specified in the provided product data for the HS-8 base; refer to the technical drawing or supplier documentation for hole pattern information. What material is the base made from? The material is not indicated in the available product data for the HS-8 base for Vertex VHT vises. Can the base be used with other bench vises? The HS-8 is designed for Vertex VHT vises; compatibility with other bench vises depends on the alternative vise’s mounting pattern and foot dimensions. How does the base contribute to machining accuracy? By adding mass and a flat, stable surface, the HS-8 base reduces vibration and movement during clamping, which improves surface finish and repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
375mm Closure Clamp 15kN Thrust, 17kN Holding Force, Zinc Plated With Hook, Vertical Base, Extended Special Arm - Kukamet
Take advantage of the combination of high holding capacity, an extended 375 mm reach and robust zinc‑plated protection to secure large or awkward workpieces reliably. Order the clamp directly via Metav Werkzeuge or ask our consultants for specification support. 333 Latch Clamp – Latching hold‑down clamp with extended special arm, vertical foot (Kukamet) A 333 latch clamp designed for heavy‑duty fixturing and secure closure tasks, featuring a long 375 mm arm and a vertical‑mount foot for stable installation. Extended 375 mm special arm Vertical‑foot mounting for stability Zinc‑plated for corrosion resistance High holding force: 17 kN Secure holding where strength matters The clamp delivers a holding force of 17,000 N and a maximum pressing force of 15,000 N, providing quantifiable security for demanding jigs and fixtures. These two forces serve different functions: pressing force is the active closure capability, while holding force indicates the retained grip under load. For planners and purchasers, the clear numeric values simplify risk assessment and load calculations, enabling selection based on measurable performance rather than subjective claims. Greater reach and flexible mounting reduce set‑up time With a 375 mm arm and a thread length of 400 mm, the device extends reach to accommodate deep or offset workpieces without complex adapter solutions. The vertical foot configuration provides a compact base for upright installations, and the integrated hook enables rapid engagement in repetitive processes. These features reduce the need for bespoke fixturing, shorten machine idle time and improve throughput in small‑batch and series production. Robust finish for workshop longevity Constructed from zinc‑plated steel, the clamp resists surface corrosion in humid or oily environments commonly found in production shops. The protective finish lowers maintenance frequency and keeps mechanical interfaces consistent over many cycles, supporting predictable clamping behaviour. The lightweight construction at 1.19 kg balances sturdiness with ease of handling during assembly and reconfiguration. Easy specification and traceable procurement The item is identifiable for procurement and inventory management by SKU 333-4-L-M12-C2 and GTIN 8682843521007, supporting error‑free ordering and traceability in bills of materials. Classification codes such as the listed eClass and ETIM entries assist integration into electronic catalogues and CAD part libraries. For engineers seeking reliable repeatability, the clamp’s clear technical data and standard connection geometry enable fast BOM insertion and consistent interchangeability across stations — the 333 latch clamp suits production environments where predictable clamping equals uptime. Choose Kukamet’s 333 latch clamp for robust, measurable clamping performance and contact Metav Werkzeuge for tailored advice and swift supply from our Emmerich hub. Technical data SKU: 333-4-L-M12-C2 GTIN: 8682843521007 eClass: 21041718 ETIM: EC011973 Core data Arm length: 375 mm Thread length: 400 mm Weight: 1.19 kg Pressing force (max): 15,000 N Holding force (max): 17,000 N Design & features Material: zinc‑plated steel Mounting: vertical foot Special feature: extended special arm With hook: yes FAQ What maximum load can this clamp handle? The clamp provides a holding force of 17,000 N and a maximum pressing force of 15,000 N; these figures should be used to verify suitability for the intended fixturing application. Is the clamp suitable for outdoor or humid workshop environments? The zinc‑plated finish offers corrosion resistance suitable for many workshop conditions; further surface protection can be applied if the application demands enhanced durability. How is the clamp mounted and what does the vertical foot imply? Mounting uses the vertical foot configuration which enables upright installation on plates or fixtures, offering a compact footprint and stable attachment for repeated operations. Can the device engage hooked fixtures directly? Yes — the unit is supplied with a hook, allowing direct engagement in latching applications and simplifying rapid part transfer and closure sequences. How to order with exact identification? Order using SKU 333-4-L-M12-C2 or GTIN 8682843521007; refer to the technical data when specifying the component in procurement or CAD systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
375mm Hand Drift Carbon Steel - Vertex
Robust carbon steel construction paired with a 375 mm length ensures dependable reach and impact for alignment and removal tasks; its 1.3 kg mass provides controlled handling for repetitive use. Order the tool directly via Metav Werkzeuge or consult our advisors for application-specific advice. Hand Drift VHD-1 — Vertex manual drift punch, carbon steel, 375 mm The Hand Drift is a manual drift punch designed for precise alignment, pin removal and light demolition tasks in workshop, maintenance and assembly environments. Carbon steel construction for tough conditions 375 mm length for extended reach and leverage 1.3 kg weight for balanced manual control SKU VHD-1 for easy identification and reorders Dependable performance for precise alignment and drift work Built for repeatable results, this manual punch combines carbon steel robustness with a design that supports controlled impact work. The heavier head and longer shaft give steady momentum, reducing the number of strikes needed to shift pins or loosen fitted parts. As a consequence, workshop throughput improves because fewer corrective operations are required, and wear on adjacent components is minimised. The tool’s straightforward form means maintenance is limited to routine inspection, supporting continuity in production and repair tasks. Practical length and weight that improve accessibility and control A 375 mm overall length delivers extended reach into confined assemblies and behind structural components where shorter tools cannot access. The tool’s 1.3 kg mass is balanced to offer both driving force and tactile control, enabling accurate strikes without excessive fatigue during repeated use. For technicians working on fixtures, frames or maintenance jobs, this combination of reach and handling reduces the need for awkward positioning or additional aids, speeding up task completion while maintaining safe working postures. Lower downtime through rugged materials and clear identification Constructed from carbon steel, the tool resists deformation under impact and retains shape over prolonged use, translating into fewer replacements and lower indirect costs. Clear labelling with SKU VHD-1 and manufacturer details simplifies inventory management and reorder processes, helping workshops keep necessary spares at hand. The tool’s simple geometry also means compatibility with existing hammers and holders, avoiding investment in special accessories. Reliability in everyday tasks supports steady workflow and predictable maintenance planning. Contact Metav Werkzeuge to discuss the Vertex Hand Drift VHD-1 and confirm suitability for specific workshop applications; our consultants are available to advise on integration into existing toolsets. Technical data Article number: VHD-1 GTIN: 4061905084195 Manufacturer: Vertex Material: Carbon steel Length: 375 mm Weight: 1.3 kg Facts 375 mm 1.3 kg eClass: 21040790 GTIN: 4061905084195 Special features Manual drift punch Carbon steel construction Vertex brand SKU VHD-1 FAQ What tasks is this drift punch suitable for? The Hand Drift VHD-1 from Vertex is intended for alignment, pin removal and light impact tasks in workshops and maintenance operations. Is the material suitable for heavy-duty use? Yes, the carbon steel construction of the Hand Drift VHD-1 provides the durability required for repeated impact work in industrial and workshop settings. How does the 375 mm length help in practical use? The 375 mm length increases reach into tight assemblies and improves leverage, allowing technicians to work in confined or hard-to-access areas without repositioning large components. Can the tool be identified easily for reordering? The tool carries SKU VHD-1 and GTIN 4061905084195 for straightforward inventory management and replenishment of Vertex drift punches. Is the weight appropriate for repetitive tasks? With a weight of 1.3 kg, the Hand Drift VHD-1 balances driving force and user control to reduce fatigue during repetitive striking operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
38-Stück Bolzen und Nuten Kit
Technische Daten: Bezeichnung: Bolzen und Nuten Kit Vollhartmetall Material: wärmebehandelter Stahl mit schwarzem Oxid finish auch als Satz verfügbar Gewicht: 3 kg bis 6,5 kg Gewinde: M10 bis M16 Stück pro Satz: 38 T-Nut: 12 bis 18 Inhalt: 6 St. T-Nuten, 4 St. Flansch, 4 St. Kupplung und 24 St. Klemmschraube Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
38-Stück Bolzen und Nuten Kit, wärmebehandelter Stahl mit schwarzem Oxid Finish, M16, 6 St. T-Nuten - Vertex
Das Bolzen und Nuten Kit vereint Wärmebehandelten Stahl, umfangreichen Lieferumfang und passgenaue Kompatibilität für effiziente Werkstückspannung. Nutzen Sie die Kombination aus Langlebigkeit, klarer Schnittstellenkompatibilität (T‑Nut 18, Gewinde M16) und kompletter Bestückung für schnelle Montagevorgänge. Bestellen Sie das Set über Metav oder fragen Sie unsere Beratung bei Bedarf an. Bolzen und Nuten Kit von Vertex »VCK-1618« Das Bolzen und Nuten Kit ist ein vollständiges Spannsystem für Werkstatt und Vorrichtungsbau, ideal zur sicheren Fixierung in T‑Nut Profilen. Bolzen und Nuten Kit »VCK-1618« von Vertex 38 Teile für vielseitige Spannaufgaben Gewinde M16 für Standardbefestigungen T-Nut 18 kompatibel mit gängigen T‑Nut Profilen Wärmebehandelter Stahl mit schwarzem Oxid Finish Robuste Materialwahl sorgt für lange Standzeiten Die Auswahl von wärmebehandeltem Stahl mit schwarzem Oxid Finish bietet eine hohe Verschleißfestigkeit und Korrosionsresistenz im Werkstattalltag. Durch die Wärmebehandlung erhöhen sich Härte und Dauerschwingfestigkeit, was die Lebensdauer der Komponenten verlängert. Die Oberfläche reduziert Reflexionen und erleichtert die Handhabung bei wiederholtem Einsatz. Ein langlebiges Material minimiert Ausfallzeiten und reduziert den Bedarf an Ersatzbeschaffungen. Passgenauigkeit und schneller Einbau reduzieren Rüstzeiten Mit T‑Nut 18 und Gewinde M16 ist das Set auf gängige Spannprofile ausgelegt und ermöglicht eine zügige Montage ohne aufwändige Anpassungen. Das Set enthält verschiedene Bauteile, sodass Anpassungen direkt am Aufspannort vorgenommen werden können. Die klar definierten Gewinde und die standardisierte T‑Nut-Abmessung sorgen für zuverlässige Kraftübertragung und reproduzierbare Spannwerte, was Rüstzeiten verringert und die Prozessstabilität erhöht. Vollständiger Inhalt für flexible Einsatzszenarien Der Lieferumfang umfasst eine Kombination aus unterschiedlichen Verbindungselementen, die direkt einsatzbereit sind: mehrere T‑Nutenbolzen, Flansche, Kupplungen und Klemmschrauben ermöglichen variable Spannkonfigurationen. Diese Komplettausstattung unterstützt Prototypenbau, Serienrüsten und individuelle Vorrichtungen gleichermaßen. Anwender profitieren von einer reduzierten Teileverwaltung, weil häufig benötigte Elemente bereits gebündelt geliefert werden. Zielgruppenorientiert entwickelt für Handwerk und Industrie Das Set richtet sich an Werkstätten, Vorrichtungsbauer und Fertigungsbetriebe, die wiederholbare und sichere Spannlösungen benötigen. Durch die Kombination aus standardisierten Maßen und robustem Material eignet sich das Kit besonders für präzise Montagearbeiten und wiederkehrende Produktionsläufe. Die einfache Integration in bestehende Aufspannsysteme macht das Set zur pragmatischen Wahl für Anwender, die Effizienz und Beständigkeit verlangen. Empfehlung: Für zuverlässige Verfügbarkeit und kompetente Beratung empfehlen wir den Bezug des Vertex Bolzen und Nuten Kit über Metav; technische Fragen beantwortet das Metav Team per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: VCK-1618 Marke: Vertex Bezeichnung: Bolzen und Nuten Kit, 38-Stück T‑Nut: 18 Fakten Gewicht: 6.5 kg Stück pro Satz: 38 Gewinde: M16 Besonderheiten Material: wärmebehandelter Stahl mit schwarzem Oxid finish Inhalt: 6 St. T‑Nuten, 4 St. Flansch, 4 St. Kupplung und 24 St. Klemmschraube Satz: ja FAQ Was ist im Lieferumfang des Sets enthalten? Das Vertex Bolzen und Nuten Kit (SKU VCK-1618) enthält insgesamt 38 Teile, darunter T‑Nutenbolzen, Flansche, Kupplungen und Klemmschrauben, sodass flexible Spannlösungen direkt möglich sind. Für welche T‑Nut Profile ist das Set geeignet? Das Set wurde für T‑Nut 18 konzipiert und passt zu gängigen T‑Nut Profilen, die diese Nutbreite verwenden; dadurch ist eine breite Kompatibilität mit Standardaufbauten gegeben. Aus welchem Material bestehen die Teile und welche Vorteile bietet das Material? Die Komponenten des Sets bestehen aus wärmebehandeltem Stahl mit schwarzem Oxid Finish, was erhöhte Härte, bessere Verschleißfestigkeit und reduzierte Korrosionsanfälligkeit bedeutet. Ist das Gewinde standardisiert und welche Größe hat es? Das Kit verwendet das Gewinde M16, eine übliche Größe für Befestigungsaufgaben im Vorrichtungsbau, die stabile und belastbare Verbindungen ermöglicht. Für welche Anwender ist das Kit besonders geeignet? Das Bolzen und Nuten Kit richtet sich an Werkstätten, Vorrichtungsbauer und industrielle Anwender, die wiederholbare, belastbare Spannlösungen benötigen und Wert auf vollständige Sets legen. Hersteller: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
38.1mm Flat Cup Magnet With Through Hole And Countersink 130N Holding Force, AlNiCo 500 - TECWERK
Compact AlNiCo 500 construction together with a holding force of 130 N and a countersunk through bore delivers secure retention even in heated processes — ideal for fixtures that require both magnetic and mechanical attachment. Order the flat countersunk pot magnet directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Flat countersunk pot magnet D 38.1 mm, 130 N holding force The flat countersunk pot magnet is a compact magnetic fastening element designed for industrial fixtures and high-temperature applications. AlNiCo 500 for elevated temperature use 130 N maximum holding force Countersunk through hole Ø 4.8 mm Compact diameter 38.1 mm for tight spaces Secure retention under heat for improved process reliability The magnet’s core advantage is its AlNiCo 500 alloy, which maintains magnetic performance at elevated temperatures up to 450 °C, reducing the risk of demagnetisation during thermal cycles. This characteristic translates into consistent clamping and positioning where temperature exposure is routine, such as in drying ovens or during coating processes. With a holding force of 130 N, the component provides measurable retention that supports steady assembly and handling, improving throughput and reducing rework. Reliable mechanical fixing for safe, flush mounting A countersunk through bore enables secure screw fastening in addition to magnetic grip, allowing a combined mechanical-magnetic attachment that prevents slippage on inclined or vibrating assemblies. The Ø 4.8 mm bore accepts common fasteners and the countersink allows the screw head to sit flush, preserving a low profile and preventing interference with adjacent parts. This design is particularly useful where a permanent or semi-permanent mounting is required alongside magnetic holding. Space-saving profile with paint-bake compatibility With a diameter of 38.1 mm and a low height of 10.4 mm, the unit is suitable for confined assemblies where a compact footprint is essential. The magnet also tolerates a coating bake temperature of 200 °C, enabling integration into painted or lacquered components without compromising adhesive processes. The compact form factor combined with thermal robustness supports efficient layout in jigs, fixtures and manufacturing aids, contributing to cleaner workflows and predictable results. For specification checks or application advice, Metav Werkzeuge’s technical team can be contacted by email or phone. Contact Metav Werkzeuge for personalised advice and secure procurement of this TECWERK flat countersunk pot magnet, ensuring the right mounting and temperature performance for the intended application Technical data Article number: 4000832272NW Facts Diameter: 38.1 mm Height: 10.4 mm Holding force: 130 N Bore diameter: 4.8 mm Maximum operating temperature: 450 °C Coating bake temperature: 200 °C Packaging unit: 1 Special features Material: AlNiCo 500 Execution: with through hole and countersink Product type: Flat countersunk pot magnet Manufacturer: TECWERK FAQ What maximum temperature can this magnet withstand before performance is affected? The TECWERK flat countersunk pot magnet (SKU 4000832272NW) is specified for continuous use up to 450 °C, which preserves magnetic stability in high-temperature processes. Can the magnet be fixed with a screw and still sit flush with the assembly surface? Yes. The unit features a countersunk through bore (Ø 4.8 mm) that allows a screw to be installed flush, combining magnetic holding with mechanical fastening for improved safety. What holding capacity can be expected from this magnet in standard conditions? Under standard conditions the magnet provides a holding force of 130 N; actual performance depends on mounting, substrate material and surface flatness. Is the magnet suitable for painted or powder-coated parts? The magnet tolerates a coating bake temperature of 200 °C, so it is compatible with many paint and lacquer processes provided the specified bake temperatures are not exceeded. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
380mm 12V/20W Dustproof Halogen Work Lamp, 110V/220V - Vertex
Take advantage of a combination of robust, dustproof design and reliable halogen illumination to keep inspection and machining stations consistently lit; the compact 380 mm arm and dual-voltage compatibility ensure fast integration into existing setups. Order the device directly via Metav Werkzeuge or consult the Metav team for tailored advice. VHL-600FT Dustproof Halogen Work Lamp (380 mm arm) by Vertex the VHL-600FT is a dustproof halogen work lamp designed for precise inspection and focused task lighting in workshops and industrial environments Vertex VHL-600FT halogen 12V/20W lamp Dustproof construction for workshop use 380 mm adjustable arm for focused illumination Steady, high-contrast illumination for precision work The halogen light module rated 12V/20W delivers a consistent beam with good contrast, making scratches, burrs and surface irregularities easier to spot during inspection and assembly tasks. Unlike LEDs that can shift tone with ageing, the halogen source provides stable colour rendering over typical service intervals; this supports reliable visual checks and reduces the need for repeated inspections. The specification of the light is clear and verifiable, supporting efficiency in quality control processes. Built to withstand workshop conditions while remaining manoeuvrable A dustproof housing keeps the optical system free from particulate ingress in busy shop environments, extending service life and reducing maintenance intervals. The articulated 380 mm arm permits precise positioning above fixtures or workpieces, enabling operators to direct light exactly where needed without risking shadowing. At 1.7 kg, the unit balances portability with stability, allowing relocation between benches or machines while maintaining a robust mounting for repeatable alignment. Simple electrical compatibility and low-complexity upkeep With 110V/220V input compatibility the lamp integrates with common supply systems across facilities, minimising the need for additional transformers or adapters. The design focuses on straightforward replacement of consumables and uncomplicated installation, so downtime for upkeep is kept to a minimum and productivity remains high. As a Vertex product assembled to industry expectations, the lamp pairs straightforward operation with dependable performance for routine inspection and maintenance tasks. Contact Metav Werkzeuge in Emmerich for specification advice and fast, reliable supply of the VHL-600FT; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and order coordination Technical Data Article number: VHL-600FT GTIN: 4061905084065 Weight: 1.7 kg Arm length: 380 mm Light: 12V/20W Power: 110V/220V Facts Weight: 1.7 kg Arm: 380 mm Power input: 110V/220V Lamp rating: 12V/20W Special features Dustproof housing Halogen light source Brand: Vertex SKU: VHL-600FT FAQ What type of light source does this work lamp use? The VHL-600FT uses a halogen light module rated at 12V/20W, chosen for steady output and consistent colour rendering during inspection tasks. Is the lamp suitable for dirty or dusty workshop environments? Yes, the lamp features a dustproof housing intended to reduce particulate ingress and to prolong reliable operation in workshop conditions. How is the lamp positioned over the workpiece? The articulated 380 mm arm provides accurate adjustment for focused illumination and repeatable positioning above benches or machines. Which voltages are supported by the lamp? The unit accepts 110V and 220V supplies, enabling straightforward integration into most industrial and workshop electrical systems. What is the manufacturer and where is the lamp made? The VHL-600FT is supplied by Vertex and carries the company’s product designation and SKU for identification in procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
380mm Clamping Ring For Soft Jaws, For 15" Chuck - Vertex
Benefit from reliable, repeatable workholding thanks to the combination of a 380 mm clamping diameter and compatibility with 15‑inch soft jaws, together with a stable mass of 10.1 kg that reduces vibration and part movement. Order the clamping ring directly via Metav Werkzeuge or ask our consultants for help with chuck compatibility and mounting. VFR-15 clamping ring — 380 mm diameter for 15‑inch soft jaws (Vertex) VFR-15 clamping ring provides even pressure distribution for delicate workpieces and is intended for use with soft chuck jaws in medium to heavy‑duty workshop applications 380 mm diameter for large workpieces Designed for 15-inch chuck jaws Compatible with soft chuck jaws Solid 10.1 kg for stable clamping Even clamping that protects soft jaws and parts A dedicated clamping ring such as this is engineered to distribute contact forces evenly across the jaw faces, reducing localised pressure points that can damage delicate components. The generous 380 mm diameter increases the clamping surface area and lowers unit pressure on soft jaw material, which in turn preserves jaw geometry and minimises rework. For process planners, this translates into improved repeatability and fewer part rejections during batch production, and for workshop technicians it means less frequent jaw refurbishment or replacement. Stability and simpler setup for faster machining cycles The ring’s substantial mass of 10.1 kg provides inertial stability that dampens vibration during clamping and initial spindle engagement, supporting more consistent clamping torque and reducing micro‑movement of the workpiece. Designed to mate with a 15‑inch chuck jaw configuration, the component integrates with standard workholding systems for straightforward installation. The design intent is to shorten setup times and support higher first‑pass accuracy, which benefits cycle time and throughput without introducing complex mounting procedures. Trusted supply and practical workshop benefits Produced under the Vertex range, the unit adheres to established workshop expectations for mechanical robustness and dimensional conformity. Procuring the ring through Metav Werkzeuge ensures access to stock held for the European market and the logistic reassurance of local distribution. The availability of a purpose‑built clamping ring for soft jaws helps maintain part quality across serial jobs and supports the wider aim of making precision affordable: lower downtime, centralised procurement with a broad product assortment, and dependable replenishment for industrial and craft workshops. For tailored advice on Vertex clamping solutions such as the VFR-15 clamping ring, contact Metav Werkzeuge for swift guidance on chuck compatibility and installation Technical data Article number: VFR-15 GTIN: 4061905095542 Manufacturer: Vertex ECLASS: 20069202 Facts Diameter: 380 mm Weight: 10.1 kg Special features For soft chuck jaws Suitable for 15-inch chuck jaw SKU: VFR-15 FAQ What jaw types is this clamping ring intended for? The VFR-15 clamping ring is designed specifically for use with soft chuck jaws, providing an even contact surface that protects jaw inserts and sensitive workpieces. Will the ring fit my 15‑inch chuck? Yes, the component is specified for compatibility with a 15‑inch chuck jaw configuration and integrates with standard chuck mounting systems used in workshops. How does the 380 mm diameter affect part handling? A 380 mm diameter increases the clamping surface area, lowering localised pressure on soft jaw material and improving repeatability for serial production. Does the weight improve machining stability? The 10.1 kg mass contributes to inertial stability during clamping operations, reducing micro‑movement and supporting more consistent clamping performance. Who manufactures the product and where can supply be sourced? The clamping ring is supplied by Vertex; procurement and European distribution are handled via Metav Werkzeuge and their logistics hub in Emmerich. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
380mm Ejector MK4-6 Semi-Automatic For DIN 228 Tool Taper, One-Hand Operation - TECWERK
Combining half‑automatic operation, a shock‑free lever release and compatibility with Morse tapers MK4–6, this extractor reduces spindle damage and speeds up tool changes. Order directly via Metav Werkzeuge for reliable supply or contact their consultants for tailored application advice. Morse Taper Extractor MK4–6 (half‑automatic) by TECWERK — one‑hand release for tool tapers Morse Taper Extractor MK4–6 (half‑automatic) is a half‑automatic extractor designed to release Morse tapers MK4–6 from spindles gently, preventing impact damage during tool changes. Half‑automatic release for MK4–6 tapers One‑hand operation with finger guard Shock‑free lever action protects spindles Fits standard DIN 228 tool tapers Faster, safer tool removal for uninterrupted production The half‑automatic lever mechanism provides a controlled, shock‑free release of the tool taper, which directly minimises the risk of spindle damage. By avoiding hammering or abrupt ejection, the device reduces downtime for repairs and preserves spindle bearings. This means fewer unscheduled maintenance stops and more predictable production flow, improving overall equipment effectiveness in the workshop. Ergonomic single‑handed operation that prioritises safety Equipped with an integrated finger guard and an ejector flap, the extractor enables swift, one‑hand operation for routine tool changes. The design reduces manual effort and enhances operator safety during repetitive tasks. In practical terms, this improves handling for both experienced machinists and workshop staff with less specialist training, while maintaining consistent removal force and protecting both tool and machine. Clear compatibility and straightforward handling for the workshop Built to the DIN 228 standard and suitable for Morse tapers MK4–6, the extractor (total length: 380 mm) fits standard tool tapers and the associated spindles. The lever actuation disengages the taper without shock, preserving the spindle seating and reducing alignment issues. Where a precise, repeatable extraction method is required, this half‑automatic solution offers a predictable and efficient alternative to manual striking or improvised tools. For expert advice on the TECWERK half‑automatic extractor and to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to ensure the right solution for the workshop. Technical data Article number: 4000832765NW Norm: DIN 228 Total length: 380 mm Suitable for: Morse tapers MK4–6 Packaging unit: 1 Facts Half‑automatic operation One‑hand operation with finger guard Ejector flap included Special features For tool tapers (DIN 228) Lever releases taper without impact; protects spindle Product type: half‑automatic extractor Manufacturer: TECWERK FAQ How does the extractor prevent spindle damage? The lever‑actuated, shock‑free release in the Morse Taper Extractor MK4–6 by TECWERK disengages the taper without impact, which protects the spindle seating and minimises wear on bearings. Which Morse taper sizes are supported? This extractor is designed for Morse tapers MK4–6 and conforms to DIN 228, ensuring compatibility with standard tool tapers in that size range. Is single‑hand operation possible and safe? Yes; the device features one‑hand operation with a finger guard and an ejector flap to allow safe, ergonomic removal of the tool taper. What is the total length of the extractor and is it suitable for bench use? The extractor has a total length of 380 mm, suitable for standard workshop and bench applications where MK4–6 tapers are used. What is the article number for ordering and identification? The article number is 4000832765NW, listed as the Morse Taper Extractor MK4–6 (half‑automatic) from TECWERK. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
380mm Three-Jaw Reversible Self-Centring Chuck, 156.5mm Height, 3xM16 Thread - Vertex
Combining self-centring 3-jaw clamping, a nominal 380 mm gripping diameter and a robust, high-mass design delivers secure, repeatable workholding for heavy turning tasks. Order the VSK-15A directly via Metav Werkzeuge or consult the Metav advisors for application-specific guidance and mounting recommendations. VSK-15A — 3-jaw self-centring reversible chuck (380 mm) A VSK-15A chuck engineered for secure, repeatable workholding in heavy-duty turning and versatile internal/external clamping applications. Self-centring 3-jaw operation Reversible function for inside/outside clamping 380 mm nominal diameter Stable mass, 64.7 kg for reduced vibration Reliable heavy-duty clamping for machining accuracy The self-centring three-jaw layout provides rapid, repeatable clamping that reduces setup time and helps maintain concentricity across serial workpieces. With a nominal 380 mm diameter, the chuck suits larger components while the high mass contributes to stability during cutting, lowering the risk of chatter. The result is consistent part quality and fewer reworks thanks to precise axial alignment and repeatability. Flexible mounting and internal/external clamping capability A reversible jaw design allows safe transition between external gripping and internal gripping operations without changing major fixtures, supporting a wider range of turning tasks. Mounting is provided via a three-point thread pattern (3xM16) that simplifies integration with standard lathe mounting plates and fixtures. The chuck’s 156.5 mm height and substantial 64.7 kg weight contribute to a low centre of gravity and improved holding force translation from spindle to workpiece. Durable construction and easy identification for procurement Built for workshop longevity, the clamping unit combines a compact profile with a robust mass to withstand continuous use in industrial environments. Minimal moving-part complexity reduces routine maintenance needs, while the clear product identifiers aid ordering and inventory: SKU VSK-15A and GTIN 4061905091612. As a component designed for reliable, long-term operation, the chuck supports higher throughput and stable process capability when paired with correct mounting and machining parameters. Contact Metav Werkzeuge for tailored advice on Vertex workholding and to request the VSK-15A specification sheet and mounting guidance directly from our Emmerich quality team Technical data Article number: VSK-15A GTIN: 4061905091612 Manufacturer: Vertex Facts Diameter: 380 mm Height: 156.5 mm Weight: 64.7 kg Thread: 3xM16 ECLASS: 21020590 Design & features Self-centring 3-jaw chuck Reversible operation for inside and outside clamping Suitable for heavy-duty turning applications FAQ What is the nominal diameter of the chuck? The chuck has a nominal gripping diameter of 380 mm, suitable for larger turning components. Can the chuck be used for both external and internal clamping? Yes, the reversible jaw arrangement enables both external gripping and internal clamping without major fixture changes. How is the chuck mounted to the spindle or backplate? Mounting is provided via three M16 threaded fixings (3xM16) to integrate with common lathe backplates and mounting interfaces. What does the chuck’s mass mean for machining performance? At 64.7 kg, the elevated mass improves stability and vibration damping during cutting, which supports higher surface quality and process stability. Which product identifiers should be used when ordering? Refer to SKU VSK-15A and GTIN 4061905091612 for procurement and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
380x330mm Machine Guard Expandable - Vertex
Take advantage of a compact, expandable guard that protects measuring areas while keeping installation time and weight to a minimum; the combination of a 380 x 330 mm footprint, expandable configuration and lightweight construction supports smoother inspection workflows. Order the unit directly via Metav Werkzeuge or consult the team for application advice. VGC-3833F – Vertex machine guard with expandable panel and compact footprint A VGC-3833F machine guard designed for small machine tools and measuring stations, providing adaptable protection and front-side precision caliper access in confined workspaces. *Compact 380 × 330 mm footprint *Expandable, modular panel design *Front-side precision caliper compatibility *Lightweight at 0.3 kg for easy handling Secure protection tailored to compact workstations The guard delivers efficient area protection while conserving valuable bench or machine space. With a compact profile of 380 x 330 mm, the unit limits intrusion into the working envelope yet provides a defined barrier that reduces contamination and accidental contact with sensitive measuring setups. The design supports front access for a front-side precision caliper, so measuring tasks remain straightforward without repeated repositioning of parts. By reducing interruptions and minimising tool handling, the guard contributes to steadier throughput and fewer measurement errors. Flexible expansion to match changing production needs Built to grow with workshop requirements, the device features an expandable concept that accommodates additional panels or extensions without replacing the entire assembly. This modular approach allows integration into evolving jigs and fixtures, making it suitable for pilot runs as well as scaled production. The adaptable construction helps avoid repeated capital expenditure when layouts change and keeps downtime low during reconfiguration. For applications where layout flexibility and rapid adaptation are priorities, this guard offers a pragmatic balance between protection and scalability. Fast fitting and low handling effort for smoother workflows Weighing only 0.3 kg, the guard is easy to manoeuvre and align during installation, cutting assembly time and simplifying routine adjustments. The lightweight nature does not compromise functional stability for everyday metrology and inspection tasks, and the accessible front opening maintains direct visibility of measuring instruments. This combination of lightweight handling and straightforward integration supports faster cycle changeovers and more consistent measurement routines, improving overall operational efficiency. Choose Vertex’s adaptable VGC-3833F machine guard for reliable, space-efficient protection and contact Metav Werkzeuge for tailored advice and ordering: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VGC-3833F GTIN: 4061905083938 Category: Vertex Facts Dimensions: 380 x 330 mm Weight: 0.3 kg EClass: 24322502 Special features Expandable design Front-side precision caliper compatibility Suitable for compact machine tools and measuring stations FAQ What materials is the guard made from? The product data does not specify the material; for material details contact Metav Werkzeuge or the manufacturer. Can the guard be extended to cover larger machines? Yes, the expandable concept allows modular extensions so the guard can be adapted for larger setups. Is the guard compatible with precision calipers? The unit is designed for front-side precision caliper access, enabling direct measurement without repositioning workpieces. How quickly can the guard be integrated into an existing workstation? The lightweight construction and compact format support rapid fitting and alignment, reducing integration time. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
380x600mm Machine Guard Expandable, Front Caliper Mount - Vertex
Take advantage of the expandable design and compact footprint combined with a lightweight construction to add flexible protection without compromising machine access; order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. VGC-3860F Vertex machine guard — expandable protective panel, compact 380×600 mm The VGC-3860F is an expandable protective guard designed for workshop machinery, offering space-saving shielding and an integrated front mount for storing precision calipers. Expandable machine guard Compact footprint 380x600 mm Front mount for precision calipers Lightweight at approx. 0.6 kg Space-efficient protection that adapts to the workstation The expandable construction of this protective panel provides a practical solution where floor and bench space are limited. With overall dimensions of 380×600 mm, the unit fits tight work cells and can be adjusted to cover varying machine openings, reducing the need for bespoke enclosures. The combination of compact size and portability supports flexible production layouts and simplifies repositioning between machines, while the modest 0.6 kg weight makes handling and retrofitting straightforward for maintenance staff. This saves time during changeovers and supports continuous workflow efficiency. Integrated storage and organised tool access for precision tasks A dedicated front mount for precision calipers integrates measuring tool storage directly into the protective barrier, keeping verniers and electronic callipers protected yet immediately accessible. By combining storage with shielding, the design minimises misplaced tools and reduces interruption during inspection or set-up routines. The arrangement supports consistent measuring practice in the workshop and contributes to faster set-up times, which in turn enhances throughput and reduces the risk of measurement-related rework. Practical durability and simple upkeep to keep operations running The unit’s straightforward construction focuses on operational reliability and low maintenance. The modular nature of the guard permits quick cleaning and simple replacement should any part become worn, limiting downtime. As a lightweight, adaptable panel, it complements modular workstations and small machine tools, offering a balance between operator protection and access for adjustment or part handling. The design supports safe, efficient operations while fitting into established workshop processes. For reliable, space-saving machine protection from Vertex choose the VGC-3860F via Metav Werkzeuge — contact our Emmerich team for application advice and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VGC-3860F GTIN: 4061905089053 Name: Machine guard Facts Dimensions: 380x600 mm Weight: 0.6 kg eClass: 24322502 Special features Expandable design Front mount suitable for precision calipers Brand: Vertex FAQ What size of machine opening does the guard cover? The VGC-3860F is specified at 380×600 mm and is intended to provide compact coverage for small to medium openings on workshop machines. Can precision calipers be stored on the unit? Yes, the guard features a front mount designed for precision calipers so measuring instruments remain accessible and protected. Is the guard easy to move between machines? Designed to be lightweight at approximately 0.6 kg, the VGC-3860F is simple to reposition for flexible workshop layouts. Does the unit require specialist maintenance? Routine upkeep is minimal; the VGC-3860F has a straightforward construction allowing simple cleaning and part replacement as needed. Who manufactures the guard and which model should be ordered? The guard is manufactured by Vertex; order the VGC-3860F model for a compact, expandable protective solution. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
38mm Adjustable Screw Jack 65–90mm Height, 30 Kg Load Capacity - Vertex
Take reliable, precise height adjustment together with a compact footprint and 30 kg capacity to simplify fixture set-up and maintenance. Benefit from a robust screw-driven mechanism and light weight that ease handling while maintaining accuracy. Order the screw jack directly via Metav Werkzeuge or request a technical consultation. VSJ-70 Screw Jack by Vertex — Adjustable 65–90 mm, 30 kg capacity The VSJ-70 is a compact screw jack designed for precise height adjustment in workshop fixtures and small lifting applications, offering stepless height control and dependable load handling. Adjustable height 65–90 mm 30 kg load capacity Compact, lightweight 0.4 kg Robust screw-driven mechanism Precise height control for accurate fixture alignment The screw-driven design provides stepless height adjustment, enabling fine positional control where millimetre accuracy matters. With an adjustable height range of 65–90 mm, the device supports incremental alignment tasks and repeatable set-up procedures without the need for shims or makeshift solutions. The mechanical screw principle converts small rotary inputs into reliable linear movement, reducing play and enabling consistent calibration of jigs and small assemblies. This makes the unit particularly suited to tasks where fixture height must be set quickly and retained under load. Space-saving strength that supports workflow efficiency Despite a nominal mass of only 0.4 kg, the component handles a rated load of 30 kg, combining portability with practical load performance. The low weight and compact diameter (38 mm) allow integration in close-packed assemblies and mobile tool trolleys, freeing bench space and simplifying handling during changeovers. The compact footprint lowers the time spent on repositioning or storage, improving throughput in small-batch production and repair work. The geometry also reduces interference with adjacent tooling, which helps maintain workflow continuity on crowded benches. Integration, durability and predictable maintenance intervals Built for workshop use, the lifting screw delivers a robust, low-maintenance operation: the simple mechanical design minimises potential failure points and simplifies preventive checks. The unit is compatible with standard workshop environments and can be incorporated into fixture plates, jigs or small lifting arrangements without extensive modification. Reliability reduces downtime and supports predictable process planning — benefits that scale across repetitive tasks in trade and light industrial settings. For any specific installation questions or to check compatibility with existing fixtures, technical advice is available from Metav’s consultants. Contact Metav Werkzeuge in Emmerich for tailored advice and supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VSJ-70 and integration options Technical data Article number: VSJ-70 GTIN: 4061905091582 Eclass: 21044290 Facts Weight: 0.4 kg Max load: 30 kg Diameter: 38 mm Adjustable height: 65–90 mm Special features Manufacturer: Vertex SKU: VSJ-70 Compact screw-driven lift unit FAQ What maximum load can the VSJ-70 support? The VSJ-70 screw jack from Vertex is rated for a maximum load of 30 kg, suitable for small lifting and fixture applications. How is height adjusted on this screw jack? Height is changed steplessly via the screw mechanism; the unit offers an adjustable height range of 65–90 mm for fine alignment. Is the device suitable for cramped or compact setups? Yes, the compact diameter (38 mm) and low weight (0.4 kg) allow integration into tight assemblies and crowded benches. Can this jack be used in repeated production cycles? The screw-driven design is built for durability and low maintenance, making it appropriate for repetitive set-ups and small-batch production tasks. Who manufactures the VSJ-70 and where is it supplied from? The unit is manufactured by Vertex; supply and technical consultation are provided via Metav Werkzeuge from Emmerich for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
38mm Clamping Screw M14x1.5 14mm Square For Indexable Holder - TECWERK
Take advantage of a precise spare part that restores clamping reliability: a M14x1.5 threaded connection, a 38 mm overall length and a 14 mm square drive ensure consistent tool retention in modular turning setups; order genuine TECWERK replacement parts directly via Metav Werkzeuge or contact our technical advisors for compatibility checks. Clamping screw D1 – M14x1.5, L 38 mm for TECWERK changeable holders The clamping screw D1 is a replacement retaining screw designed for TECWERK changeable holders for turning tools, offering a compact form factor for secure tool clamping. M14x1.5 thread for secure clamping 38 mm overall length 14 mm square drive for standard keys Replacement part for TECWERK holder Minimise downtime with a direct-fit spare for modular holders This clamping component acts as a straightforward replacement to restore the original clamping geometry of modular tool holders. The combination of an M14x1.5 thread and a compact 38 mm length reproduces factory tolerances, which reduces the need for additional shimming or reworking. Compatibility with TECWERK changeable holders means faster reassembly of the turning tool system and a lower likelihood of process interruptions, thereby supporting uninterrupted production and predictable setup times. Faster, repeatable clamping for consistent machining A square drive of 14 mm delivers positive engagement with standard wrenches and torque tools, enabling accurate torque transfer and uniform clamping force across repeated tool changes. The clear thread specification M14x1.5 provides predictable axial behaviour when tightening, which helps maintain concentricity and tool alignment. For workshop planners this translates into fewer rejects and a reduced need for time‑consuming adjustments after replacement, improving overall process efficiency. Practical workshop benefits and fitment guidance Supplied as a single unit, the screw is intended as a direct spare for TECWERK holders that employ a prism-style retention. As a repair part it simplifies inventory management for maintenance teams: stocking the correct D1 retaining screw avoids extended machine downtime. Verification of the holder type and the presence of a prism seat is recommended before installation to ensure fitment and preserve the original clamping geometry. Routine visual checks of the thread and drive face will maintain reliable operation. Choose genuine TECWERK spare parts via Metav Werkzeuge for assured fit and faster recovery of production — contact Metav Werkzeuge in Emmerich for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832430NW Type: D1 Product: Clamping screw Facts Thread: M14x1.5 Overall length: 38 mm Square drive: 14 mm Packaging unit: 1 Special features Replacement part for TECWERK changeable holder for turning tools Designed for holders with prism retention 4-sided square drive 14 mm FAQ Is this clamping screw compatible with TECWERK changeable holders? Yes. The clamping screw D1 (SKU 2000832430NW) is supplied as a replacement part specifically for TECWERK changeable holders for turning tools and is intended for use with prism-style retention. Which torque tool fits the 14 mm square drive? Standard 14 mm square wrenches or torque adapters for a 14 mm square interface are suitable for applying the required tightening force to the 14 mm drive. What does the thread specification M14x1.5 mean for installation? The M14x1.5 designation indicates a metric thread with a 14 mm major diameter and a 1.5 mm pitch; this ensures standardised engagement and predictable axial movement during tightening. Can this screw be used to replace worn clamping elements to restore concentricity? Yes. Replacing a worn clamping screw with this D1 spare reproduces the original clamping geometry and helps restore concentricity and repeatability in the tool holder assembly. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
38mm Clamping Screw M14x1.5 Square 14mm For Changeable Tool Holder - TECWERK
Combining the M14×1.5 thread with a 38 mm overall length and a 14 mm square drive ensures quick restoration of secure clamping in TECWERK changeable holders; order the spare part directly via Metav Werkzeuge or consult our specialists for fitment advice. Clamping screw size C M14×1.5 L38 mm — 4-sided 14 mm square for changeable holder (TECWERK) The clamping screw size C M14×1.5 L38 mm is a dedicated spare part for TECWERK changeable holders, designed to secure turning bars and prism versions in workshop turning operations. *For TECWERK changeable holder compatibility *Thread M14×1.5 *Overall length 38 mm *14 mm square drive Reduced downtime through precise thread and length The combination of a standard M14×1.5 thread and a defined 38 mm length delivers a predictable replacement that reinstates original tool geometry quickly. As a spare component designed for changeable holders, this clamping screw reduces adjustment time after a changeover, contributing to a steadier production flow. The clear specification of the thread and length allows procurement and maintenance teams to standardise replacement cycles and avoid uncertain fits. Secure torque transfer and repeatable clamping The 14 mm four‑sided drive provides a positive engagement with common workshop wrenches and torque tools, which translates to reliable torque transfer and reduced risk of slippage during tightening. A predictable interface means clamping force is more consistent between changes, improving repeatability of turning operations and lowering the likelihood of rejects due to movement at the insert seat. This practical reliability supports smoother shift handovers and steadier machining quality. Spare‑part logistics aligned with workshop needs Supplied as a single unit and referenced by SKU 2000832429NW, the screw is intended as a straightforward spare for TECWERK changeable holders. Clear identification and standard dimensions simplify inventory management and spare‑parts purchasing. Having the correct, specified replacement on the shelf minimises downtime and keeps turning tools back in service without the guesswork sometimes involved with non‑standard fasteners. Contact Metav Werkzeuge for availability and compatibility advice on TECWERK clamping screws and to streamline spare‑part supply for the workshop Technical data Article number / SKU: 2000832429NW Type: C Product: Clamping screw Facts Thread: M14×1.5 Overall length: 38 mm Square drive: 14 mm Packaging unit: 1 Special features Spare part for TECWERK changeable holder for turning bars and prism versions Design: 4-sided square drive for secure wrench engagement Intended use: replacement screw for clamping in changeable holders FAQ Is this clamping screw compatible with TECWERK changeable holders? The clamping screw size C M14×1.5 L38 mm is specified as a spare part for TECWERK changeable holders and is intended to fit holders designed for turning bars and prism variants. What are the exact dimensions and thread specification? The component features an M14×1.5 thread, an overall length of 38 mm and a 14 mm four‑sided square drive; reference SKU 2000832429NW for ordering. Can this part be used as a direct replacement during scheduled maintenance? Yes, the clamping screw is intended as a direct spare part for TECWERK changeable holders, allowing maintenance teams to restore original clamping geometry without custom modifications. How is the part supplied for inventory purposes? The clamping screw is supplied in a packaging unit of 1 and is listed under SKU 2000832429NW for simple stock control and procurement. Which applications is this screw intended for in turning operations? Designed for securing turning bars and prism variants in TECWERK changeable holders, the screw supports repeatable clamping for standard workshop turning tasks. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
38mm Clamping Tool Kit M12 x 14, 38-Piece Universal Jaws Set - AMF
Take advantage of a ready‑to‑use clamping solution that pairs broad compatibility with standard T‑slot tables and a complete component mix for fast set‑up and repeatable results; the combination of standardised fasteners and matched clamping parts supports efficient production workflows—order the set directly via Metav Werkzeuge or consult our specialists for tailored configuration. Clamping Tool Assortment No. 6532 — M12 x 14 T‑slot, 38‑piece set by AMF The Clamping Tool Assortment No. 6532 is a T‑slot clamping set designed for M12 x 14 machine tables and workshop fixtures, offering a compact selection of standard fasteners and clamping elements for general production use. Comprehensive clamping components included Compatible with M12 x 14 T‑slots Standard DIN fasteners for interchangeability Ready for machine‑table and workshop use Faster set‑ups through a complete clamping kit A compact clamping kit that groups the most frequently required parts reduces assembly time and inventory complexity. With a focus on compatibility with M12 x 14 T‑slot tables, the assortment enables consistent, repeatable clamping without searching for single items across different suppliers. The modular mix of pads, bars and fasteners allows shops to configure clamping arrangements quickly, cutting non‑productive time and improving throughput by simplifying fixture preparation. Engineered for compatibility and secure fixing The set contains matched T‑slot screws, hexagon nuts and washers that conform to recognised standards, ensuring reliable mechanical engagement with machine T‑slots. Components such as universal clamping pads in different sizes and clamping bars of varying lengths provide secure contact surfaces and leverage. Standardised items like M12 hexagon nuts (DIN 6330 B) and washers (DIN 6340) allow confident use in existing fixtures and make replacement straightforward, lowering the risk of setup errors and guaranteeing a consistent clamping interface across multiple jobs. Robust components that support production demands Although compact, the assortment is designed for routine workshop and production use, with each element intended to withstand repeated mounting and adjustment. The combination of clamping bars and lift‑type pads distributes clamping forces evenly, which helps maintain component integrity during machining and reduces rework. Where repeatability matters, the matched parts in the kit deliver predictable clamp behaviour, contributing to stable machining conditions and better part quality. Practical applications and procurement advantages This assortment is suitable for general machine‑table clamping tasks in small to medium batch production, prototyping and toolroom environments. As a single, preconfigured solution it helps reduce the number of individual SKUs to manage and streamlines purchasing. For workshops seeking dependable supply and expert advice, Metav offers a transparent procurement channel and product support to ensure the set integrates with existing fixturing practices. Contact Metav Werkzeuge for a tailored recommendation on how the AMF Clamping Tool Assortment No. 6532 can be configured for specific machine tables or fixture layouts and to arrange prompt delivery from Emmerich. Technical data Article number: 4000833100NW SKU: 4000833100NW Type: Nr. 6532 Product type: Clamping tool assortment Manufacturer: AMF Facts T‑slot size: M12 x 14 Contents: 38 pieces Package unit: 1 UID: 4000833100NW Special features Universal clamping pad size 2 Universal clamping pad size 3 Clamping bar 14 x 100 mm Clamping bar 14 x 160 mm T‑slot screw 50 mm T‑slot screw 80 mm T‑slot screw 125 mm Set screw 100 mm Hexagon nut M12 DIN 6330 B Washer M12 DIN 6340 Extension nut M12 FAQ What machine tables is this clamping set compatible with? The assortment is designed for use with machine tables that accept M12 x 14 T‑slot fittings, providing standardised fasteners and pads for reliable mounting. Which standards do the fasteners in the set follow? Fasteners in the set include hexagon nuts M12 DIN 6330 B and washers M12 DIN 6340, ensuring interchangeability and conformity with common workshop practices. Can the components be used separately for custom fixtures? Yes, the individual items such as clamping bars, universal clamping pads and T‑slot screws can be combined for bespoke fixture layouts or replenished as needed. Is the set suitable for production environments or only for prototyping? The assortment is suitable for both prototyping and low‑ to medium‑volume production where standardised, repeatable clamping is required. What is included in the set and how does it help daily operation? The set bundles standard clamping elements and fasteners (pads, bars, T‑slot screws, nuts, washers and extension nuts), which simplifies setup, reduces downtime and minimises the number of separate parts to order. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
38mm Cross-Slot Adapter Arbor With 16mm Collet, DIN 69871 Form AD/B, Central Coolant - TECWERK
Benefit from a stable, standardised machine interface combined with active coolant management for longer tool life and reliable chip evacuation; the enlarged collar and 16 mm clamping diameter ensure secure mounting and repeatable results. Order the arbour directly via Metav Werkzeuge or consult our advisors for compatibility and delivery options. Cross-slot mounting milling arbour (DIN 69871 AD/B) — SK40, 16 mm clamping Ø, TECWERK The cross-slot mounting milling arbour is a SK40 taper accessory for the secure installation of cutter heads and slot cutters to DIN 1880, designed for machining tasks that demand rigid clamping and effective coolant delivery. Enlarged collar diameter for greater stability Central coolant supply with resealable channels Steep taper to DIN 69871 Form AD/B Engineered for secure clamping and consistent concentricity The arbour is built around a steep taper (DIN 69871 AD/B) and a SK40 seating to provide a rigid spindle-to-tool connection that reduces vibration and runout. With a 16 mm clamping Ø, the design supports precise retention of cutters and heads with a cross slot to DIN 1880, so concentricity and repeatable positioning are achieved across batch production. The enlarged collar diameter increases bearing surface and resists bending moments, which translates into improved surface finishes and reduced rework in demanding milling operations. Optimised coolant routing for improved tool life and process stability Integrated central coolant supply and resealable coolant channels at the collar, together with additional coolant bores on the face, enable targeted delivery of cutting fluid to the tool interface. This configuration aids in effective chip removal and thermal control, which in turn lowers cutting temperatures and extends cutter life. The possibility to close channels at the collar gives flexibility in different machining setups, while the radial and face coolant exits promote consistent lubrication and reduce the risk of clogging during interrupted cuts. Practical compatibility and workshop benefits Designed to receive cutter heads and slot cutters to DIN 1880, the arbour supports straightforward integration into existing tool sets and changeover processes. The combination of standardised taper, clear dimensional data and active coolant features reduces setup time and simplifies inventory management for production and jobbing shops. Conformity to recognised standards provides an additional layer of reliability for quality assurance procedures, while the robust mechanical design contributes to predictable process outcomes and lower overall operating costs. Contact Metav Werkzeuge today to discuss the TECWERK SK40 arbour (SKU 2000833815NW), verify compatibility with current tooling and request a tailored quotation — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 2000833815NW Label: Quernutaufsteckfräsdorn DIN 69871AD/B Spann-D.16mm SK40 A.-L.35mm TECWERK Type: Cross-slot mounting milling arbour Standard: DIN 69871 Form AD/B Facts Diameter D: 38 mm Clamping Ø d: 16 mm A (projection): 35 mm L1: 17 mm Packaging unit: 1 Special features Enlarged collar diameter Steep taper to DIN 69871 Form AD/B Central coolant supply Resealable coolant channels at the collar Additional coolant bores on the face For cutter heads and cutters with cross slot to DIN 1880 SK40 shank FAQ What cutters are compatible with this arbour? The arbour accepts cutter heads and slot cutters designed with a cross slot to DIN 1880; compatibility is ensured when the cutter conforms to that standard. How is coolant supplied to the tool? Coolant is delivered via a central supply through the taper with resealable channels at the collar and additional bores on the face to direct fluid to the cutting zone. What taper and shank does the arbour use? The product uses a DIN 69871 Form AD/B steep taper with a SK40 shank for machine spindle mounting (SKU 2000833815NW). Why choose an enlarged collar diameter? An enlarged collar diameter increases bearing surface and resistance to bending, improving stability and concentricity during heavy or interrupted milling. Can coolant channels be closed for dry machining? Yes, the collar channels are designed to be resealable, providing flexibility to run with or without internal coolant routing. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
38mm Cross-Slot Adapter Arbor With Enlarged Collar, Hollow Shank DIN 69893 Form A, 16mm Clamping - TECWERK
Take advantage of the arbor's combination of HSK-A63 shank standard conformity, enlarged collar for increased rigidity and through-face coolant bores for reliable chip evacuation to maintain consistent machining quality. Order the TECWERK arbor directly via Metav Werkzeuge or consult Metav's specialists for application-specific advice. Transverse-slot mounting arbor HSK-A63, clamping Ø16 mm – TECWERK The transverse-slot mounting arbor by TECWERK is a DIN 69893 Form A tool holder for secure attachment of cutter heads and milling cutters with a transverse slot, designed for precision slot milling applications. Enlarged collar for higher rigidity Hollow shank taper to DIN 69893 Form A Face coolant bores for directed coolant flow For cutter heads and cutters with transverse slot Improved rigidity for reproducible slot precision The arbor delivers a stable connection between machine spindle and tooling thanks to its enlarged collar diameter and HSK interface. Increased collar mass reduces deflection under cutting loads, which directly improves dimensional accuracy and surface finish when producing transverse slots. This stability is particularly beneficial in high-precision milling setups, where tool bending can cause tolerance drift; the design helps to maintain repeatability across batches while reducing rework and scrap. Effective coolant routing to protect cutting edges Integrated coolant channel bores at the face provide a direct path for lubrication and cooling to the cutter interface, aiding heat control and chip evacuation. By directing coolant to the cutting zone, the arbor helps to extend tool life and maintain cutting performance during longer cycles. The combination of internal coolant routing and a hollow shank taper supports consistent thermal conditions at the tool holder, which contributes to steady machining results and fewer unplanned tool changes. Conformity with standards and broad tool compatibility Manufactured to DIN 69893 Form A, the arbor mates with HSK-A63 spindles and accepts cutter heads and milling cutters with a transverse slot to DIN 1880. The clear specification of the shank geometry and mounting interface simplifies tool selection and setup in CNC environments, enabling predictable clamping behaviour and fast tool changes. This standard conformity reduces setup time and ensures interchangeability within established tooling systems. Practical dimensions for workshop efficiency Key dimensions are optimised for common slot-milling tasks: a nominal diameter of 38 mm, a clamping diameter of 16 mm and a functional projection length of 50 mm with a 17 mm segment relevant for the mounted tool. These measures support a compact yet robust tool assembly that balances reach and stiffness, making the arbor suitable for repetitive production runs where consistent performance and straightforward inspection are required. Contact Metav Werkzeuge for tailored technical advice and to arrange procurement of this TECWERK HSK-A63 transverse-slot mounting arbor for stable, standard-compliant slot milling operations. Technical data Article number: 2000833875NW Product type: Transverse-slot mounting arbor Shank: HSK-A63 Standard: DIN 69893 Form A Brand: TECWERK Core data Diameter D: 38 mm Clamping diameter d: 16 mm A (projection length): 50 mm L1: 17 mm Special features Enlarged collar diameter Hollow shank taper to DIN 69893 Form A Coolant channel bores at the face For cutter heads and cutters with transverse slot to DIN 1880 FAQ What spindle interface does this arbor use? The arbor uses an HSK-A63 interface in accordance with DIN 69893 Form A, ensuring secure clamping and fast tool changes. Which cutter types can be mounted on this arbor? Cutter heads and milling cutters designed for a transverse slot to DIN 1880 can be mounted on the TECWERK transverse-slot mounting arbor. How does the coolant supply work on this arbor? Coolant is supplied via face bores that direct lubricant to the cutter interface, supporting chip evacuation and temperature control. Will the enlarged collar improve machining stability? Yes, the enlarged collar diameter increases rigidity at the tool holder junction, reducing deflection and improving repeatability during slot milling. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com