Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
40x25mm Flange With 7/8-9" Thread, 120g - Vertex
Take advantage of the combination of a standard 7/8-9" threaded interface, compact 40 x 25 mm dimensions and a low mass of 0.12 kg for reliable, low-inertia connections in tooling and fixturing applications. Order the flange directly via Metav Werkzeuge or ask the consultants for integration advice. Flange 4517I by Vertex — 7/8"-9" threaded, 40 x 25 mm The Flange 4517I is a compact mechanical coupling component designed to provide a standard threaded connection for tooling, fixtures and accessory mounting in industrial assemblies. Standard 7/8-9" threaded interface Compact 40 x 25 mm flange profile Lightweight 0.12 kg for minimal added mass Compatible with Vertex tooling systems Reliable threaded connection for repeatable assemblies The flange offers a standard 7/8-9" threaded interface, providing a secure mechanical joint that simplifies interchangeability with other standard components. The use of a recognised thread form ensures consistent torque behaviour and straightforward replacement in maintenance routines. Delivered as a precision-made coupling element, the component reduces alignment uncertainty in assemblies where repeatability matters, translating into fewer set-up cycles and measurable time savings during retooling. Space- and weight-efficient design that improves dynamics With compact 40 x 25 mm dimensions and a mass of 0.12 kg, this flange is tailored for installations where space is limited and added inertia must be minimised. The reduced mass contributes to lower centrifugal loads in rotating sub-assemblies and helps to maintain balance in precision equipment. In retrofit situations or new machine builds, using a low-mass flange can improve cycle consistency and reduce wear on bearings and drive elements, supporting longer service intervals and steadier process performance. Straightforward integration for versatile industrial use Manufactured for compatibility within Vertex product lines, the component facilitates quick assembly on existing fixtures and stands. Clear identification via SKU 4517I and the GTIN simplifies procurement and inventory management. The design supports common fixturing tasks such as mounting sensors, adapters or auxiliary tooling, providing a pragmatic solution for production, jigs and test rigs where a reliable mechanical interface is required. For assured compatibility with Vertex components and fast supply from our European quality hub, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and order guidance Technical data Article number: 4517I GTIN: 4061905089220 eClass: 37029205 Brand: Vertex Facts Dimensions: 40 x 25 mm Weight: 0.12 kg Thread: 7/8-9" Special features Designation: Flange Category: Vertex Images available: 4518-main.jpg, 4518-detail.jpg, 4518-technische-zeichnung.jpg FAQ What threading standard does the flange use? The flange uses a standard 7/8-9" threaded interface, enabling compatibility with common threaded fixtures and accessories for Vertex flange SKU 4517I. Is this flange suitable for rotating assemblies where low inertia is required? Yes. The compact 40 x 25 mm form factor and 0.12 kg mass make the Vertex flange 4517I appropriate for applications where minimising added inertia benefits rotational balance and bearing life. How is the flange identified for procurement and stock control? Identification is via SKU 4517I and GTIN 4061905089220; both can be used when ordering the Vertex flange to ensure correct part selection. Can the flange be used to mount sensors or auxiliary tooling? The flange is designed as a mechanical coupling element suitable for mounting sensors, adapters and auxiliary tooling in fixturing and assembly contexts, providing a standard threaded attachment point. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
40x300 mm Runout Test Mandrel 0.005 mm Accuracy, Hardened Gauge Steel, DIN 229 - Metav IndustryLine
Take advantage of precise spindle alignment thanks to a runout accuracy of 0.005 mm and a hardened gauge steel construction that ensures long-term stability; order the Test Mandrel MT5 directly via Metav Werkzeuge or consult our experts for application advice. Test Mandrel MT5, 40 x 300 mm — high-precision runout reference for spindle inspection (Metav IndustryLine) The Test Mandrel MT5, 40 x 300 mm is a purpose-built inspection mandrel for checking and aligning machine spindles with a Morse taper connection, designed for workshop and production metrology tasks where repeatable concentricity is required. Runout accuracy 0.005 mm Hardened gauge steel construction MT5 (Morse taper) mounting for spindles Ideal for spindle alignment and testing Achieve consistent concentricity with measurable benefits A runout accuracy of 0.005 mm provides a clearly verifiable baseline for spindle condition and concentricity checks. Expressed as a measurable tolerance, this degree of precision reduces rework and scrap by enabling earlier detection of spindle eccentricity. The mandrel serves as a stable reference piece in test setups, giving a quantifiable means to compare spindle behaviour before and after maintenance. Using a calibrated reference such as this mandrel shortens diagnostic cycles and supports quality-control routines with objective data. Robust construction for repeatable inspections Manufactured from hardened gauge steel and produced to DIN 229, the mandrel combines dimensional stability with wear resistance so that results remain consistent over many measurement cycles. The 40 mm diameter with a 300 mm functional shank and a total length of 460 mm gives sufficient reach for typical spindle checks while preserving a rigid profile. At approximately 5 kg, the component balances mass for vibration damping during rotation with manageable handling for workshop personnel. This construction supports repeatable measurements and reduces uncertainty caused by instrument deformation. Practical compatibility and workshop use Equipped with an MT5 (Morse taper) mounting, the mandrel integrates directly into conventional spindle sockets and test fixtures used in machining centres and inspection benches. The simple seating principle allows rapid installation and removal without auxiliary tooling, streamlining inspection workflows. As a purpose-made inspection gauge it is suited to both periodic maintenance checks and acceptance testing after spindle rebuilds. The design focuses on usability and traceable results, helping teams maintain production uptime while documenting spindle condition objectively. Contact Metav Werkzeuge for tailored advice on integrating the MT5 test mandrel into existing inspection procedures or to request a formal quotation from Metav Werkzeuge GmbH in Emmerich Technical Data Article number: M318.935 GTIN: 4054469183947 Material: Hardened gauge steel Standard: DIN 229 Dimensions: Ø40 x 300 mm Total length: 460 mm Weight: 5 kg Runout accuracy: 0.005 mm Mounting: MT5 Facts Category: Gauges / Inspection mandrels Use: Runout testing and spindle alignment Brand: Metav IndustryLine SKU: M318.935 Special features Precision ground shank Suitable for workshop and production environments Robust, wear-resistant finish FAQ What level of concentricity can be expected with this mandrel? The Test Mandrel MT5, 40 x 300 mm offers a runout accuracy of 0.005 mm, providing a reliable reference for high-precision spindle inspection and alignment checks. Is the mandrel compatible with common machine spindles? Yes, the MT5 (Morse taper 5) mounting is compatible with spindles and fixtures designed for this taper size; the mandrel is intended for direct insertion into MT5 sockets for inspection tasks. What material is used and how does it affect measurement stability? The mandrel is made from hardened gauge steel, a material chosen for its dimensional stability and wear resistance, which helps maintain consistent measurement results over time. Can this mandrel be used for diagnostic checks after spindle repair? The mandrel is suitable for acceptance testing and post-repair diagnostics; its 0.005 mm runout accuracy allows clear before-and-after comparisons of spindle behaviour. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
415V-12/24 Transformer With Bulb For VHL Halogen Lamp, Multi-Voltage Options - Vertex
Combining multiple input-voltage compatibility, an integrated halogen bulb and a compact 1.47 kg assembly, this unit delivers reliable low-voltage supply and straightforward in-field replacement. Order the module directly via Metav Werkzeuge or contact our consultants for tailored advice. V-T17 transformer and bulb — Transformer with multi-voltage input V-T17 is a combined transformer and halogen bulb assembly designed to supply stable low-voltage power for VHL halogen lamps in workshop and industrial applications. Transformer with multiple input voltages Includes halogen bulb for VHL lamps Compact assembly, weighs 1.47 kg Ready for quick replacement in workshops Stable low-voltage power that reduces downtime The integrated transformer converts mains supply to a consistent low-voltage output (12 V or 24 V), supporting three selectable input ranges: 415 V, 380 V and 230 V. This versatility enables straightforward integration into different electrical systems without extensive rewiring. The stable output reduces lamp flicker and prevents erratic performance, which in turn minimises production interruptions and maintenance cycles. The design focuses on functional reliability rather than decorative extras, delivering measurable operational benefits for machine rooms and lighting circuits. Ready-to-fit assembly for rapid on-site replacement Supplied as a matched transformer and halogen bulb set, the unit is intended for quick swap-outs when a lamp reaches end of life. The compact construction and overall weight of 1.47 kg make handling and installation more efficient during maintenance operations. By having the power converter and lamp matched, electrical compatibility is ensured at delivery, cutting diagnostic time and simplifying inventory management for maintenance teams. The result is faster return-to-service and lower labour costs per replacement event. Built for workshop compatibility and dependable service Manufactured by Vertex, the assembly is targeted at practical industrial use where dependability matters. The combined configuration reduces the number of separate components to stock and eliminates mismatched pairings that can cause premature failure. The straightforward electrical specification supports planning and procurement: it is a pragmatic choice where consistent light output and predictable service intervals are priorities. Sourcing via an experienced distributor provides an additional layer of quality assurance for European workshops and technical buyers. Contact Metav Werkzeuge in Emmerich for ordering or technical consultation; email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 — Metav’s team will advise on compatibility and delivery options Technical Data Article number: V-T17 GTIN: 4061905092398 Manufacturer: Vertex Weight: 1.47 kg Voltage options: 415V-12/24; 380V-12/24; 230V-12/24 Facts Weight (kg): 1.47 Input voltages: 415 V, 380 V, 230 V Output voltages: 12 V, 24 V Special features Transformer and halogen bulb included Designed for halogen lamp VHL SKU: V-T17 Brand: Vertex FAQ What input voltages does the unit accept? The unit accepts mains inputs of 415 V, 380 V or 230 V and provides low-voltage outputs of 12 V or 24 V for VHL halogen lamps. Is the halogen bulb supplied with the transformer? Yes, the V-T17 is delivered as a combined transformer and halogen bulb assembly suitable for VHL luminaires. How heavy is the complete assembly? The complete assembly weighs 1.47 kg, facilitating straightforward handling during maintenance. Can this assembly be used in different electrical systems without modification? The selectable input ranges (415 V, 380 V, 230 V) allow integration into various mains supplies without extensive modification, ensuring flexible deployment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
415x413x50mm Base for Vertex VHO Bench Vise - Vertex
The combination of robust stability and precise compatibility ensures dependable clamping for demanding workshop tasks; benefit from the rigid mounting platform and compact footprint to streamline setup and machining. Order the base directly via Metav Werkzeuge or consult the team for application advice. HSO-8 base for Vertex VHO vises — rigid mounting platform, 35 kg The HSO-8 base is a dedicated mounting plate designed to provide a stable foundation for Vertex VHO vises in professional workshops and production environments Solid 35 kg base Compatible with Vertex VHO vises Compact footprint 415 x 413 x 50 mm Precision-machined mounting surface Stable foundation that reduces vibration and improves accuracy This mounting plate delivers a stable platform for clamping applications, with a mass of 35 kg that helps dampen vibration and supports consistent machining results. The compact footprint of 415 x 413 x 50 mm minimises the space required on the machine table while offering a broad contact area for reliable fixation. By providing a heavier, immobile base, the unit reduces micro-movements during tightening and operation, which in turn supports better repeatability and contributes directly to higher workpiece quality. The design prioritises dependability for repetitive production tasks. Engineered for quick integration and precise alignment The unit features a precision-machined mounting surface that eases alignment with the clamping system and machine table. Precision in this context refers to a finely finished flatness and consistent datum references that make positioning and re-positioning straightforward, even for operators with limited experience. Clear mounting points and defined locating features (as supplied) facilitate fast assembly and reduce machine downtime. The result is a solution that supports efficient workflows and shorter set-up times without compromising on the exactness required for accurate machining. Built to support workshop efficiency and long service life Designed for professional use with Vertex VHO vises, the base improves operational reliability and contributes to a predictable production flow. Robust mass and finish help reduce maintenance requirements, since less frequent re-adjustment is needed after initial set-up. The compatibility with Vertex clamping technology means fewer adaptations or bespoke fixtures are necessary, simplifying inventory and reducing planning effort. For workshops aiming to standardise clamping solutions, this mounting plate offers a practical way to increase throughput while maintaining process stability. Choose the Vertex HSO-8 base for reliable clamping performance and contact Metav Werkzeuge for tailored advice or fast supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: HSO-8 GTIN: 4061905089329 Description: Base for Vertex VHO vises Facts Dimensions: 415 x 413 x 50 mm Weight: 35 kg Special features Compatibility: for Vertex VHO vises Finish: precision-machined mounting surface Intended use: mounting and stabilising clamping systems FAQ What is the weight of the HSO-8 base? The HSO-8 base has a mass of 35 kg, providing a stable mounting platform for machining tasks. Which vises are compatible with this base? This mounting plate is designed for use with Vertex VHO vises and integrates directly with that clamping series. What are the exact dimensions of the base? The base measures 415 x 413 x 50 mm, offering a compact footprint with a broad contact surface. Is information available about the mounting surface quality? The product data specifies a precision-machined mounting surface, intended to assist with accurate alignment and repeatability. Can the HSO-8 reduce set-up time in a workshop? Yes; by providing defined mounting features and a stable platform, the HSO-8 helps shorten set-up and repositioning times for repetitive production tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
41mm Closure Clamp Horizontal Foot With Hook, 2,000N Thrust / 2,500N Hold - Kukamet
Take advantage of robust clamping performance combined with a compact design and reliable surface treatment for consistent fixture results; the clamp delivers 2,000 N of clamping force and a 2,500 N holding capacity. Order the part directly via Metav Werkzeuge or contact our consultants for specification support. Toggle latch clamp 421 by Kukamet — horizontal base, 2,000 N clamping force A practical Toggle latch clamp 421 designed for secure horizontal mounting and medium-duty fixture applications in workshops and production cells. Horizontal mounting with flat base Max clamping force 2,000 N Holding force up to 2,500 N Blackened finish with hook included Consistent clamping force for repeatable production The latch provides a dependable 2,000 N clamping force with a 2,500 N holding capacity that supports repeatable fixture cycles. Its mechanical toggle action converts operator input into a stable clamping result, reducing variability in assembly and machining tasks. The compact construction keeps the closure compact on jigs while the low weight of 0.32 kg minimises added mass on moving fixtures. Such consistent mechanical performance improves process throughput and reduces rework. Secure horizontal mounting that improves accessibility Designed with a horizontal base, the clamp installs neatly onto flat fixture plates or subframes, offering unobstructed access from above. The mounting arrangement simplifies alignment in dedicated jigs and enables a low-profile fit that helps maintain tool clearance. The thread length 41 mm allows fine adjustment of the clamping point, making the latch adaptable to varying workpiece heights without modifying the fixture layout. Durable surface and integrated hook for long service life A blackened finish provides basic corrosion resistance and a professional appearance suitable for workshop environments. The integrated hook ensures a positive closure and reduces the risk of accidental release in vibration-prone processes. Together these design choices contribute to sustained functionality in repetitive applications while keeping maintenance straightforward — periodic inspection and light lubrication are normally sufficient to maintain smooth operation. Clear specification for straightforward integration The clamp’s compact footprint and measurable figures make it simple to specify for fixtures and production jigs. With a distinct mechanical function and clearly stated performance values, the component can be compared objectively when engineering fixture hardware. The model is supplied under SKU B421-3 by Kukamet, facilitating procurement and traceability for inventory and ordering systems. For secure, repeatable clamping from Kukamet, contact Metav Werkzeuge to request product details or procurement assistance — Metav Werkzeuge supplies directly from Emmerich and can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B421-3 GTIN: 8680731508673 Model: 421 Manufacturer: Kukamet Performance figures Max clamping force: 2,000 N Holding force: 2,500 N Thread length: 41 mm Weight: 0.32 kg Features & materials Horizontal foot mounting Blackened finish Hook included ECLASS: 21041718 ETIM: EC011973 FAQ What clamping and holding forces does the latch provide? The latch achieves a clamping force of 2,000 N and a holding capacity of 2,500 N, suitable for medium-duty fixture applications with stable toggle action. Is the clamp suitable for horizontal mounting on jig plates? Yes, the clamp features a horizontal base designed for mounting on flat plates and subframes, enabling a low-profile installation on jigs. How is the clamping point adjusted? Adjustment is provided via the threaded spindle with a thread length of 41 mm, allowing fine tuning of the clamping position to accommodate different workpiece heights. What surface treatment and anti-corrosion measure are applied? The unit is supplied with a blackened finish, offering basic corrosion protection and a durable appearance for workshop use. Which manufacturer and SKU identify this part? This item is supplied by Kukamet and is listed under SKU B421-3, which assists with procurement and inventory management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
42-52mm Screw Vice Nr. 6400 Group 52 Flat Base Load Capacity 100, TR 30 x 4 - AMF
Take advantage of a compact clamping solution that combines a flat support and a height-adjustable range of 42–52 mm for consistent, repeatable positioning in jig and fixture setups; order directly via Metav Werkzeuge or ask the consultants for assistance. AMF Screw Clamp Block Nr. 6400 - 52 — flat support, height 42–52 mm AMF Screw Clamp Block Nr. 6400 - 52 is a compact clamping element designed for precise, repeatable fixation in production fixturing and workshop jigs; suitable where stable support and reliable thread-driven adjustment are required Flat support for secure clamping Height adjustable 42–52 mm Trapezoidal thread TR 30 x 4 Max. load capacity 100 Consistent clamping accuracy for repetitive production The clamp block offers a height-adjustable range (H min. 42 mm to H max. 52 mm) that enables fine vertical alignment when integrating into fixtures or machine tables. Thanks to the trapezoidal thread TR 30 x 4, movement is smooth and backlash is reduced compared with standard metric threads, which supports repeatable positioning during series work. This mechanical precision reduces set-up time and ensures that fixtures keep their reference points across repeat operations, improving throughput and process reliability. Robust mechanics that simplify maintenance and integration Constructed for workshop use, the component features equal-diameter mounting interfaces (D1: 50 mm, D2: 50 mm) that make it straightforward to seat and replace in modular clamping systems. The defined maximum load capacity (100) provides a clear performance threshold for design calculations and safety margins in jig construction. The screw-driven concept preserves clamping force under cyclic loads and requires minimal maintenance: routine inspection of the thread and lubrication keeps the unit operational with low downtime, supporting consistent production cycles. Practical benefits for engineering and tooling teams As a compact clamping element, the block reduces the complexity of bespoke fixtures while retaining flexibility for multiple part families. The flat support allows broad contact with workpieces where surface stability matters, while the screw adjustment enables controlled force application without relying on hydraulic or pneumatic systems. For engineering teams, integration is straightforward: the unit’s clear mechanical parameters permit fast CAD modelling and simple verification of clamping geometry, shortening the development loop for new jigs and reducing the iterative trial phase. For precision clamping and practical workshop integration, request supply details and technical advice from Metav Werkzeuge regarding the AMF screw clamp block Nr. 6400 - 52 (SKU 4000833113NW) — support and delivery are coordinated from Emmerich. Technical data Article number / SKU: 4000833113NW Type: Nr. 6400 - 52 Product type: Screw clamp block Manufacturer: AMF Packaging unit: 1 Facts Max. load capacity: 100 Thread: TR 30 x 4 Height min.: 42 mm Height max.: 52 mm D1: 50 mm D2: 50 mm Special features Flat support Trapezoidal thread for low backlash Size: Gr. 52 FAQ What applications suit this clamp block best? The AMF screw clamp block Nr. 6400 - 52 is intended for fixture and jig clamping in workshop and light industrial settings where a flat support and height adjustment (42–52 mm) are required for stable part positioning. How is vertical adjustment achieved on this unit? Vertical adjustment is provided via the trapezoidal thread (TR 30 x 4) built into the AMF screw clamp block, allowing controlled and repeatable movement between the specified height limits. Which mounting dimensions must be considered when integrating the block into a fixture? The block has two mounting diameters (D1: 50 mm and D2: 50 mm) that should be matched to locating bores or seats in the fixture layout to ensure secure installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.4mm Self‑Centred Drill Chuck J2S Taper, Heavy‑Duty 28kg, Type 10XHSP - Vertex
Take advantage of the combination of robust J2S taper mounting, self-tightening clamping action and compact dimensions for reliable toolholding in demanding machining set-ups. Order the component directly via Metav Werkzeuge or request tailored advice from our consultants. Self-tightening drill chuck 10XHSP – J2S taper, Ø 42.4 mm (Vertex) the self-tightening drill chuck 10XHSP offers secure clamping for drill and reaming operations in workshop and production environments Self-tightening clamping action for secure hold J2S taper mounting for stable spindle connection Ø 42.4 mm nominal diameter for compact installation Robust construction; weight 28 kg for mass-damped stability Reliable clamping for consistent production results The self-tightening mechanism converts spindle torque into radial clamping force, creating a reliably secure grip on round-shank tools without additional tightening devices. This behaviour reduces slip under load and ensures repeatable positioning, which is particularly valuable in serial drilling or reaming tasks where precision and process stability matter. The chuck's design supports controlled tool retention while keeping setup simple, making it suitable for both workshop fixtures and machine-tool use. Stable interface with the machine spindle A J2S taper provides a compact, mechanically positive connection to the spindle. The taper interface is engineered for axial and radial stiffness, translating into reduced vibration and improved concentricity during cutting operations. With a nominal Ø 42.4 mm footprint and significant mass (approx. 28 kg), the assembly benefits from inherent damping that helps maintain steady cutting conditions and improves surface finish. These attributes support consistent hole quality and reduce the need for rework. Practical workshop integration and maintenance The component's straightforward mounting concept and robust build simplify installation and long-term maintenance. The compact dimensions allow integration in confined spindle noses while the mass helps attenuate chatter in interrupted cuts. Routine inspection focuses on the taper seating and the clamping surfaces; preserved cleanliness and correct seating ensure sustained performance. For users seeking dependable toolholding without complex attachment systems, this clamping device represents a pragmatic and efficient solution. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the Vertex 10XHSP into existing machinery and for ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 11019 GTIN: 4061905087011 Type: 10XHSP Brand: Vertex Core specifications Diameter: 42.4 mm Weight: 28 kg ECLASS: 21020490 ETIM: EC002125 Features Self-tightening clamping action Taper: J2S Suitable for machine-tool mounting FAQ What tool shank types can be held by this chuck? The self-tightening drill chuck 10XHSP is designed for cylindrical tool shanks and secures round shank drills and reamers through its clamping jaws. Which taper is used for spindle mounting? Mounting is via a J2S taper; the Vertex 10XHSP uses this taper to ensure a rigid and repeatable spindle connection. How does the chuck improve drilling stability? Mass and taper stiffness of the unit reduce vibration and enhance concentricity, so the 10XHSP provides improved stability and consistent hole quality. Is this chuck suitable for heavy-duty production environments? Yes, the robust construction and self-tightening clamping make the component appropriate for continuous machining operations where reliable tool retention is required. What identifiers should be used when ordering spare parts or replacements? Refer to SKU 11019 and GTIN 4061905087011 when requesting parts or replacements for the Vertex 10XHSP Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.4mm Self‑Closing Drill Chuck B12 Taper, 10XHSP Series - Vertex
Combining a self-centring mechanism with a precise Ø 42.4 mm clamping capacity and a compact B12 taper, this chuck delivers stable, repeatable clamping for production and workshop tasks. Order the drill chuck directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertex 10XHSP drill chuck — self-centring, B12 taper, Ø 42.4 mm The Vertex 10XHSP drill chuck is a self-centring workholding device engineered for accurate drilling and toolholding on machines with a B12 taper interface Self-centring clamping mechanism Ø 42.4 mm maximum clamping diameter B12 taper mounting for compact spindles Secure clamping for consistent machining results The self-centring design ensures that the jaws close symmetrically around the tool shank, producing high concentricity and minimising run-out during drilling and reaming operations. This stability translates into repeatable hole quality, less tool wear and fewer rejected parts, supporting efficient batch production. The Ø 42.4 mm specification indicates the maximum clamping capacity, which covers a wide range of common drill shank sizes while keeping the setup compact. For users new to workholding, self-centring means faster changeovers because manual alignment is largely eliminated, so setup time is reduced without sacrificing accuracy. Compact taper for reliable machine integration A B12 taper provides a compact and rigid spindle interface that is widely used on small to medium machine spindles. The small form factor offers a secure mechanical connection while preserving spindle clearance and accessibility for tooling. Because the taper is a standardised interface, compatibility with machines that accept B12 tapers is straightforward; the compact mounting also helps maintain spindle balance and minimises vibration during high-precision operations. The combination of a robust taper and the chuck's clamping mechanism supports stable machining even at elevated speeds typical for metalworking tasks. Workshop advantages and operational efficiency Built for routine workshop use, this chuck delivers a balance of durability and serviceability. The construction emphasises robust contact surfaces and a design that allows rapid jaw movement, which reduces cycle times during repeated tool changes. As a result, maintenance intervals are straightforward to plan and the risk of unexpected downtime is lowered, contributing to overall productivity. When tool life and process reliability matter, the mechanical simplicity of the chuck provides an economical, low-fuss solution that complements more complex tooling systems. Proven origin and supply assurance Manufactured by Vertex, the item benefits from the brand's experience in toolholding components and machining accessories. Supplying through Metav Werkzeuge adds an additional layer of quality assurance: Metav acts as a quality filter for the European market and offers a comprehensive product range and logistics from Emmerich. For buyers who value traceability and dependable sourcing, choosing components from established manufacturers and trusted distributors reduces procurement risk and supports long-term workshop planning. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex 10XHSP drill chuck into existing spindle systems and for supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 11020 GTIN: 4061905095559 Manufacturer: Vertex Type: 10XHSP Facts Diameter: 42.4 mm Weight: 28 kg ECLASS: 21020490 ETIM: EC002125 Taper: B12 Special features Self-centring design Drill chuck Compact B12 taper mounting FAQ What is the maximum clamping diameter of the chuck? The maximum clamping diameter is 42.4 mm; the Vertex 10XHSP drill chuck supports common round shank sizes up to this value. Does the chuck require manual centring? No, the chuck features a self-centring mechanism that aligns the jaws automatically to provide consistent concentricity. Which taper interface is required for mounting? The unit mounts to a B12 taper spindle interface; compatibility depends on the machine accepting this taper size. Is the Vertex 10XHSP suitable for high-speed drilling? The chuck's compact taper and balanced clamping are suitable for typical workshop speeds; check machine speed limits and tooling recommendations for specific high-speed applications. What is the article number for ordering and reference? The article number (SKU) is 11020 for ordering and stock reference Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.4mm Self‑Closing Drill Chuck B16 Taper, 10XHSP Series - Vertex
The self-tightening design combined with a standard B16 taper and a compact 42.4 mm body ensures secure clamping and consistent machining results; ideal where repeatable tool retention and short setup times matter. Order the part directly via Metav Werkzeuge or contact our consultants for tailored advice. Drill chuck 10XHSP – self-tightening chuck with B16 taper The Drill chuck 10XHSP is a self-tightening drill chuck designed for machining applications that require reliable bit retention and compatibility with B16 taper spindles. Self-tightening chuck for secure grip B16 taper mounting for standard spindles Compact 42.4 mm body diameter Robust construction for industrial use Consistent grip for efficient machining The self-tightening clamping principle increases grip as torque rises, which reduces slippage and the need for repeated tightening during production. This behaviour delivers a direct operational benefit: fewer interrupted cycles and less scrap from slipped tools. For workshops and small production runs, the result is a measurable rise in throughput and a reduction in manual intervention, helping to keep machining sequences uninterrupted and predictable. Simple integration with B16 spindles Fitting is straightforward thanks to the B16 taper mounting, a common standard on compact spindles and drilling heads. The compact 42.4 mm body diameter aids accessibility in confined setups and permits close tool spacing on multi-spindle heads. Compatibility with standard interfaces reduces set-up time, while the clear mechanical interface minimises the need for adapters, helping to streamline equipment configuration and shorten changeover windows. Built for industrial reliability The chuck is specified as type 10XHSP and comes from Vertex, reflecting a focus on workshop-grade robustness. The construction supports continuous use in production environments and is specified with a weight of 28 kg, indicating substantial build quality suitable for heavy-duty fixtures. The solid mechanical design reduces the frequency of maintenance interventions and supports a stable clamping force over long service intervals, contributing to predictable tool life and lower indirect costs. Practical advantages for everyday use Beyond the core clamping function, the design of this chuck emphasises consistency and ease of use. The profile and locking behaviour make it easier to maintain concentricity under cutting load, which improves hole quality and repeatability. For operations that prioritise reliable holemaking and reduced rework, this solution provides a straightforward technical improvement without requiring changes to established machine tool interfaces. Order the Vertex drill chuck type 10XHSP via Metav Werkzeuge for dependable clamping performance; Metav Werkzeuge in Emmerich offers expert advice and supply reliability to integrate this chuck into existing setups Technical data Article number: 11021 GTIN: 4061905095566 Type: 10XHSP Brand: Vertex Facts Diameter: 42.4 mm Weight: 28 kg eClass: 21020490 ETIM: EC002125 Special features Self-tightening clamping mechanism B16 taper mounting Industrial-grade construction SKU: 11021 FAQ What mounting interface does this drill chuck use? The drill chuck 10XHSP is supplied with a B16 taper interface, making it compatible with spindles and drilling heads that accept B16 mounting. Is the 10XHSP suitable for high-torque drilling applications? The self-tightening design of the 10XHSP by Vertex improves grip under increasing torque, reducing slippage and making it suitable for higher-torque operational profiles where secure retention is required. What are the key dimensions to consider for installation? Key dimensions for the 10XHSP include a body diameter of 42.4 mm and the B16 taper; refer to these values when planning spindle compatibility and clearance. How does this chuck affect tool changeover times? The standard B16 mounting and the compact body profile of the 10XHSP reduce the need for adapters and allow closer tool spacing, which helps to shorten changeover and setup times. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.4mm Self‑Tightening Drill Chuck J33 Taper, 10XHSP Series - Vertex
Benefit from the combination of self-tightening operation, a 42.4 mm nominal diameter and a secure J33 taper for consistently reliable clamping and reduced setup time. Order the drill chuck directly via Metav Werkzeuge or ask our consultants if needed. Self‑tightening drill chuck '10XHSP' with 42.4 mm capacity and J33 taper — Vertex A self‑tightening drill chuck '10XHSP' engineered for industrial clamping tasks, offering robust holding force and stable machine mounting for demanding production environments Self‑tightening keyless operation 42.4 mm nominal diameter J33 taper for stable mounting Heavy‑duty 28 kg construction Consistent clamping for uninterrupted production The self‑tightening design delivers reliable grip on tools without additional tightening keys, reducing setup steps and increasing throughput. Built to industrial standards, the chuck minimises runout and vibration, which directly benefits hole quality and tool life. The combination of a 42.4 mm capacity and the chuck’s heavy construction ensures that cutting forces are absorbed effectively, supporting repeatable results in serial drilling and heavy‑duty operations. Secure mounting with J33 taper explained The J33 taper provides a robust interface between spindle and chuck, ensuring axial and radial stability under load. In practice, this means fewer micro‑movements during machining and a lower risk of concentricity loss. A taper coupling like this is chosen where machine rigidity and repeatable positioning are priorities; it facilitates quick mounting while maintaining a secure fit for high‑torque tasks. The chuck’s specification supports stable transfer of forces from the tool to the machine frame. Designed for heavy industrial use and reduced downtime Constructed for longevity, the assembly’s substantial mass (approx. 28 kg) contributes to damping and steady performance during extended cycles. The design supports operations where frequent tool changes and sustained clamping forces occur, helping to reduce maintenance intervals. Where precision and uptime matter, the chuck’s attributes translate into measurable efficiency gains and fewer interruptions for re‑alignment or corrective machining. Technical compatibility and procurement confidence Supplied under the Vertex brand and identified as type 10XHSP, the chuck is suited to workshops and production lines requiring dependable clamping solutions. Metav’s role as a quality filter for the European market means procurement is backed by experience and an extensive range of precision products. For additional technical parameters or application advice, Metav’s specialists can provide targeted information and guidance to match machine interfaces and process requirements. Contact Metav Werkzeuge today to discuss how the Vertex 10XHSP chuck fits specific machine setups and production needs or request detailed technical drawings and compatibility checks Technical data Article number: 11018 GTIN: 4061905086250 Type: 10XHSP Name: Self‑tightening drill chuck Brand: Vertex Facts Diameter: 42.4 mm Weight: 28 kg Taper: J33 eClass: 21020490 ETIM: EC002125 Special features Self‑tightening keyless operation Heavy‑duty construction Industrial clamping application SKU: 11018 FAQ What machines is the chuck compatible with? The Vertex 10XHSP drill chuck mounts on spindles equipped with a J33 taper and is intended for machines where a robust, repeatable clamping interface is required. How does the self‑tightening mechanism improve workflow? Self‑tightening operation on the 10XHSP reduces the need for separate tightening tools, shortening setup times and improving cycle efficiency in serial drilling tasks. Is the chuck suitable for high‑torque drilling? The chuck’s heavy‑duty construction and secure J33 taper provide the stability required for higher torque applications in industrial environments. Can the chuck be used for precision drilling operations? Yes. The Vertex 10XHSP is designed to minimise runout and vibration, supporting consistent hole quality and extended tool life for precision work. What identifiers should be quoted when ordering? Please reference the Vertex 10XHSP, SKU 11018 and GTIN 4061905086250 when enquiring or placing an order. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.5mm Quick-Change Drill Chuck 1–10mm, 1/4" Hex Shank, Radial Locking, Hammer-Resistant - RÖHM
Take advantage of the combination of fast bit changes, radial locking for impact resistance and a compact 1–10 mm clamping range to keep assembly and maintenance tasks efficient and reliable; order directly via Metav Werkzeuge or consult their technical advisers for compatibility and delivery. EXTRA80-RV quick-change drill chuck – 1/4” hex shank, 1–10 mm capacity (RÖHM) The EXTRA80-RV is a radial-lock quick-change drill chuck designed for use with impact wrenches and cordless drills, offering secure clamping from 1 to 10 mm for fast tool exchanges 1/4" hex shank for quick tool changes 1–10 mm clamping range Radial locking for impact resistance Carbide jaw facets for secure grip Faster bit changes and uninterrupted workflow Engineered for quick tool swaps, the chuck’s 1/4” hex shank and quick-change design reduce downtime on repetitive fastening and drilling tasks. The compact clamping span of 1–10 mm covers the common range of drill and driver bits used in assembly lines and maintenance benches, meaning fewer tool changes and more continuous operation. The straightforward interface with standard hex-bit holders delivers predictable cycle times and less handling during production runs. Built to take impact tools and reversible operation With a radial locking mechanism and construction rated as radial-impact-proof, this chuck is suitable for heavy-duty applications with impact wrenches and cordless drills. The design supports both right- and left-hand rotation, maintaining grip during reverse operation and rapid direction changes. These attributes translate into reliable performance under fluctuating torque loads and reduce the risk of bit ejection during high-torque tasks. Secure hold and consistent machining results The chuck’s jaw facets are made from carbide, providing a secure grip and improved wear resistance compared with standard steel jaws. That durability helps maintain clamping concentricity over time, which is essential for repeatable hole quality and reduced rework. For operators unfamiliar with technical terms: carbide is a very hard material used for cutting and clamping surfaces to keep their shape and grip under repeated stress. Practical design for demanding workshop environments A plastic housing contributes to weight reduction while the overall build remains impact and percussion-resistant, making the chuck convenient for mobile cordless use without sacrificing robustness. The compact outer diameter and hex shank format make it compatible with standard quick-change adapters and bit holders, simplifying integration into existing tool fleets. The result is a toolholder that balances ease of handling with the durability required in workshops and on-site installations. Choose RÖHM’s EXTRA80-RV for robust, fast-change performance and contact Metav Werkzeuge for tailored advice or to arrange supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 8002875400NW Type: EXTRA80-RV Product: Quick-change drill chuck Brand: RÖHM Core specifications Clamping range: 1–10 mm Shank: 1/4" hex Outer diameter: 42.5 mm Packaging unit: 1 UID: 8002875400NW Special features Radial locking mechanism Suitable for impact wrenches and cordless drills Radial-impact-proof / impact-drill-proof Plastic housing Carbide jaw facets for wear resistance Reversible rotation: right and left FAQ Is this chuck compatible with impact drivers? The EXTRA80-RV quick-change drill chuck (RÖHM, SKU 8002875400NW) is designed for use with impact wrenches and cordless drills and is specified as radial-impact-proof. What clamping range does the chuck cover? The chuck accepts shank diameters from 1 to 10 mm, which accommodates most common drill bits and driver bits. How is the chuck secured to the drill? The tool attaches via a 1/4" hex shank for quick and secure connection to standard hex chucks and quick-change adaptors. Are the jaws resistant to wear? Yes, the jaw facets are made from carbide, offering enhanced wear resistance and a consistent grip over repeated use. Can the chuck be used for left-hand rotation? The design supports both right- and left-hand rotation, making it suitable for reversible applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.7mm 1-10mm Quick-Change Drill Chuck 3/8”-24 Radial Lock, Through-Hole, Reversible - RÖHM
Take advantage of a robust, metal-bodied quick‑change chuck that combines a 1–10 mm clamping range with a secure radial lock for safe operation in both cordless and mains drills; order via Metav Werkzeuge or request consultancy for application-specific advice. RÖHM EXTRA80-RV — Keyless drill chuck, 1–10 mm clamping, 3/8"-24 mount the RÖHM EXTRA80-RV keyless drill chuck is built for demanding workshop use and universal drill compatibility Metal housing with radial locking Clamping range 1–10 mm Compatible with 3/8"-24 mount Reversible for right and left rotation Carbide-tipped jaw chamfers Faster, tool-free bit changes to keep operations moving A keyless operation enables rapid bit swaps, reducing downtime on repetitive tasks. The 1–10 mm clamping range accommodates common twist‑drill and driver bit shanks, while the through‑drilled body allows use with long shank tools. This combination of features is intended to boost workflow efficiency in production and maintenance environments without additional accessories. Built to withstand workshop conditions and protect investments The chuck is housed in a metal body and fitted with dust protection, which means resilient performance in dusty and rough conditions. The radial locking mechanism secures the bit under reversing loads, and the shock‑resistant design supports both handheld and bench applications. Together, these properties extend service life and reduce the frequency of replacements. Broad compatibility for cordless and corded drills, including reverse operation Fitted with a 3/8"-24 mount, the chuck is suited to a wide range of portable and fixed drills. It is specified for right and left rotation, making it suitable for screwdriving tasks that require reversible drive. Additionally, the unit is described as hammer‑drill resistant, so it can be used in machines that feature impact modes where compatible. Precise clamping to reduce slippage and maintain concentricity The jaw chamfers are made from carbide, providing a durable clamping edge that grips shank material firmly and minimises wear. With an outer diameter of 42.7 mm, the chuck offers a compact footprint while delivering consistent axial alignment. Precise clamping reduces runout and slippage, resulting in cleaner holes and longer tool life. For tailored advice on the RÖHM EXTRA80-RV keyless drill chuck and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 8002875403NW Type: EXTRA80-RV Product: Keyless drill chuck Mount: 3/8”-24 UID: 8002875403NW Data Clamping range: 1–10 mm Outer diameter: 42.7 mm Packaging unit: 1 Rotation: Right and left rotation Special features Metal housing Radial locking Compatible with cordless and mains drills with self-adjusting Hammer-drill resistant Dust protection Through-drilled Jaw chamfers with carbide Suitable for right and left rotation FAQ Is the chuck suitable for use with cordless screwdrivers? The RÖHM EXTRA80-RV keyless drill chuck is specified for use with cordless drills and screwdrivers and supports self‑adjusting mains drills as noted in its feature set. Can this chuck be used in hammer‑drill mode? According to the product specification, the chuck is described as hammer‑drill resistant, making it suitable for use on drills that provide impact action when the application allows. What mount standard does the chuck use and which drills will accept it? The chuck uses a 3/8"-24 mount, which is compatible with many handheld and benchtop drills that accept this threaded mounting size. How does the radial locking affect performance during reversing? Radial locking increases the retention force on the bit under reversing loads, improving safety and reducing the risk of slippage when running in both right and left rotation. Are the jaw faces wear‑resistant for repeated clamping? The jaw chamfers are specified as carbide, which provides a hard, wear‑resistant gripping surface designed to maintain clamping performance over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.8mm Quick-Change Drill Chuck B 12 1–13mm Capacity Right/Left Rotation, Self-Clamping - RÖHM
Take advantage of a fast, reliable clamping solution that combines self-tightening operation, a 1–13 mm clamping range and a compact B12 mount to keep machining cycles efficient and secure; order the Supra SK quick-change drill chuck directly via Metav Werkzeuge or consult Metav’s advisors for specification support. Supra SK – Self-tightening quick-change drill chuck, 1–13 mm, B12 (RÖHM) The Supra SK is a self-tightening quick-change drill chuck with a B12 mount designed for both right- and left-hand rotation, engineered for workshop and industrial drilling tasks where fast tool changes and reliable clamping are essential Self-tightening quick-change mechanism Clamping range 1–13 mm B12 mount for secure attachment For right- and left-hand rotation Clamping-force safeguard for hammer drills Faster tool changes and consistent clamping for uninterrupted production The self-tightening mechanism provides rapid tool exchange while maintaining a reliable clamping force, which reduces machine downtime and speeds up batch processing. Because the chuck grips automatically during spindle rotation, manual tightening is minimised and repetitive handling is reduced, improving operator efficiency. The integrated clamping-force safeguard is designed to protect the tool retention under the vibration conditions found in high-frequency hammer-drilling, ensuring fewer stoppages and more predictable production cycles. Compact B12 mount and bidirectional rotation for flexible machine use A compact B12 mounting interface makes this chuck suitable for installations where space is limited but secure attachment is required. The capability for right- and left-hand rotation enables reversible drilling and tapping operations without changing the tool holder, expanding the range of tasks that can be completed with a single chuck. With an outer diameter of 42.8 mm, the unit occupies minimal spindle real estate while providing stable support for a wide range of drill sizes. Wide clamping range and industrial application scope The 1–13 mm clamping range accommodates everything from slender pilot drills to general-purpose twist drills, reducing the need for multiple chucks. Built for routine workshop use and tougher industrial environments, the chuck is suitable for handheld and stationary drilling where quick changes and dependable retention matter. Its construction and functional concept favour maintenance-friendly operation, helping to lower the risk of lost tools and the associated production interruptions. For fast, reliable clamping in both workshop and production settings, contact Metav Werkzeuge for expert guidance on the RÖHM Supra SK with B12 mount — call +49 2822 7131930 or email info@metav-werkzeuge.com for specification advice and purchase options Technical data Article number: 4000832133NW Type: Supra SK Product: Quick-change drill chuck Manufacturer: RÖHM Mount: B12 Clamping range: 1–13 mm Rotation direction: Right- and left-hand rotation Outer diameter: 42.8 mm Packaging unit: 1 Additional properties: Self-tightening; clamping-force safeguard for hammer drills with high natural frequency; designed for rapid clamping and release of drill tools Facts Clamping range: 1–13 mm Outer diameter: 42.8 mm Mount: B12 Packaging unit: 1 Special features Self-tightening quick-change mechanism Clamping-force safeguard for high-frequency hammer drilling Suitable for right- and left-hand rotation Compact design for limited spindle space FAQ How large is the clamping range of this chuck? The clamping range is 1–13 mm, allowing the Supra SK quick-change chuck to accept a wide variety of twist drill sizes for versatile workshop use. Is the chuck suitable for reversible drilling operations? Yes, the chuck is specified for right- and left-hand rotation and supports reversible drilling and tapping without swapping the tool holder. Which mount does the chuck use and how compact is it? The unit uses a B12 mount and has an outer diameter of 42.8 mm, making it suitable where a compact, secure attachment is required. Can this chuck cope with hammer-drilling vibrations? The Supra SK includes a clamping-force safeguard specifically intended for hammer drills with a high natural frequency, improving tool retention under vibrational load. What advantages does the self-tightening design offer in production? Self-tightening operation enables faster tool changes and consistent clamping force, which reduces downtime and improves repeatability across production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.8mm Supra SK Quick-Change Drill Chuck 1–13mm, Self-Clamping, Reversible Rotation - RÖHM
Take advantage of fast, tool‑free chucking together with reliable clamping for a steadier workflow; the self‑tightening mechanism and 1–13 mm range reduce set‑up time and improve repeatability. Order the Supra SK directly via Metav Werkzeuge or consult our specialists for application advice. Supra SK keyless drill chuck — 1–13 mm clamping, B16 mount by RÖHM Supra SK is a self‑tightening keyless drill chuck designed for B16 mounts, enabling rapid tool changes and secure clamping in both right‑ and left‑hand rotation applications. Self‑tightening for fast tool changes Clamping range 1–13 mm B16 mounting taper Suitable for right‑ and left‑hand rotation Reduce set‑up time with dependable clamping The combination of a self‑tightening mechanism and a broad 1–13 mm clamping span significantly reduces changeover time in mixed drilling operations. The chuck grips standard twist drills and short shank tools without a key, which streamlines workflow and limits interruptions during production. With fewer tool changes and faster seating, run‑times become more predictable; the quick tool changes translate into measurable gains in throughput for repeat tasks and small batch runs. Secure performance for reversing and percussive use Constructed for bidirectional spindles, the chuck supports right‑ and left‑hand rotation and incorporates clamping force retention suitable for machines with higher natural frequencies, including percussion‑enabled systems. This feature helps prevent slippage when direction changes or axial impacts occur, maintaining consistent torque transfer to the tool. The B16 interface provides a compact, rigid connection to the spindle, ensuring the chuck remains stable under reversing loads while preserving machining accuracy. Compact design that endures workshop conditions A compact outer diameter of 42.8 mm keeps the toolholder clear in tight set‑ups and allows improved access to confined workpieces. The B16 mounting taper offers a simple, well‑established interface for many drill heads and toolposts. Supplied as a single unit per package, the chuck is straightforward to fit and maintain; periodic cleaning and light lubrication of the spindle interface are sufficient to sustain reliable function. Built for everyday workshop use, the design balances accessibility with robust clamping to support consistent results across general metalworking and maintenance tasks. For secure, fast clamping on B16 spindles choose the RÖHM Supra SK and contact Metav Werkzeuge for procurement or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000832136NW Type: Supra SK Product: Keyless drill chuck Mount: B16 Manufacturer: RÖHM UID: 4000832136NW Data Clamping range: 1–13 mm Outer diameter: 42.8 mm Packaging unit: 1 Special features Self‑spanning, for fast clamping and release Clamping force retention for hammer/percussion drills with high natural frequency Suitable for right‑ and left‑hand rotation (reversible operation) Drehrichtung: for right‑ and left‑hand rotation FAQ Is the chuck compatible with standard B16 spindles? The Supra SK is designed for a B16 mount, so it fits standard B16 interfaces used on many drill heads and toolholders. What tool diameters can the chuck hold? Clamping capacity covers 1–13 mm, enabling use with a wide range of twist drills and small shank tools. Can the chuck be used in reversible drilling operations? Yes, the chuck supports right‑ and left‑hand rotation and includes clamping force retention suitable for reversing spindles. Is the Supra SK suitable for percussion‑capable machines? The chuck features clamping force retention intended to maintain grip under the higher natural frequencies encountered in percussion‑enabled drilling. How many chucks are supplied per package? The product is supplied as a single unit; packaging unit: 1. Hersteller: Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42mm Collet Chuck for ER-25 Collets, MT-3 Taper - Vertex
Precise ER‑25 clamping combined with an MT‑3 taper delivers repeatable concentricity and simple machine integration. The compact 42 mm outer diameter and low weight reduce spindle load while maintaining reliable toolholding. Order the collet chuck directly via Metav Werkzeuge or ask our consultants if needed. Vertex V-452 Collet chuck — ER‑25 compatibility, MT-3 taper V-452 is a collet chuck engineered for secure clamping of ER‑25 collets on MT‑3 spindles, suitable for small to medium machining tasks. Precision clamping for ER‑25 collets MT-3 taper for standard toolholders 42 mm robust outer diameter Consistent concentricity for repeatable machining The design focuses on precision and repeatability: using ER‑25 collets ensures tight radial runout and stable tool engagement, which translates into improved surface finish and prolonged tool life. A centred and rigid hold reduces vibration and enables more consistent cycle times across serial operations. This stability is particularly relevant for shops that prioritise dimensional accuracy and part interchangeability. Easy integration with common spindle tapers Featuring an MT-3 taper, the chuck is ready for straightforward installation on spindles and adapters that accept morse taper tooling. The standard interface simplifies retrofitting to existing machines and supports conventional setup procedures without special adaptors. The familiar taper also helps maintain spindle dynamics and balance when combined with correctly matched tooling and collets. Compact design that lightens spindle load With a 42 mm outer diameter and a low mass of 0.5 kg, the chuck minimises additional rotational inertia while providing a robust clamping envelope. The compact footprint aids accessibility at the tool centre and reduces interference with fixtures or neighbouring tools. Less mass on the spindle contributes to lower energy consumption during acceleration and can improve spindle response in operations with frequent speed changes. Practical benefits for workshop reliability Made to accommodate standard ER‑25 collets and produced under Vertex quality control, the V-452 offers a pragmatic balance between performance and ease of use. Regular collet changes and routine inspections are straightforward, helping to keep downtime minimal. Combined with Metav's application support and supply reliability, this solution supports uninterrupted production and predictable tooling performance. Speak to Metav Werkzeuge in Emmerich for tailored advice on the Vertex V-452 collet chuck and compatibility with existing tooling — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: V-452 GTIN: 4061905085321 Brand: Vertex Facts Diameter: 42 mm Weight: 0.5 kg ECLASS: 21020405 Special features Compatible with ER‑25 collets MT-3 spindle taper For use with ER-style collet systems FAQ Which collet sizes fit this chuck? The V-452 collet chuck is designed for ER‑25 collets and accepts the standard range of ER‑25 collet sizes. Can the chuck be mounted directly to an MT‑3 spindle? Yes, the Vertex V-452 features an MT-3 taper for direct mounting to spindles or adaptors that accept MT‑3 interfaces. Is the V-452 suitable for high-speed applications? The compact 42 mm diameter and 0.5 kg mass of the V-452 support improved balance and reduced spindle load, which benefits many higher-speed operations when combined with properly balanced collets and tooling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42mm Collet Chuck with SK-40 Taper for ER-25 Collets, 42mm Shank - Vertex
Benefit from a combination of SK‑40 taper rigidity, ER‑25 collet compatibility and a compact 42 mm body that ensures stable clamping and predictable machining results. Order the collet chuck directly via Metav Werkzeuge or ask our consultants if further technical validation is required. Collet chuck V-749 – SK‑40 toolholder with ER‑25 compatibility by Vertex The Collet chuck V-749 is a steep‑taper toolholder designed for secure clamping of ER‑25 collets in metalworking and precision machining applications SK‑40 taper for rigid toolholding Compatible with ER‑25 collets 42 mm outer diameter, compact design Maximise rigidity for consistent results A steep SK‑40 taper produces a concentrated contact area between spindle and toolholder, which increases axial and radial stiffness. The resulting reduction in deflection and chatter leads to more precise cuts and improved surface finish. For workshops where repeatability matters, this design decreases the frequency of rework and extends cutting‑tool life by maintaining a stable tool position under load. Versatile clamping with standard ER‑25 collets Compatibility with ER‑25 collets offers broad tooling flexibility while keeping changeover straightforward. The chuck accepts standard ER‑25 collet inserts, enabling a single toolholder to cover a range of shank diameters with repeatable concentricity. This simplifies inventory management and reduces set‑up time, supporting efficient workflows in both jobbing shops and production cells. Compact form and predictable handling for workshop use With a 42 mm outer diameter and a mass of 1.1 kg, the toolholder balances compactness with substantial mass for vibration damping. The Vertex design focuses on a robust connection to SK‑40 spindles, delivering dependable clamping without unnecessary bulk. Where machine clearance and accessibility are restricted, the smaller envelope of this chuck aids fixturing and toolpath planning without compromising stability. Built for reliability and straightforward service Manufactured under Vertex quality standards, the chuck is intended for routine industrial use with simple maintenance routines. Regular cleaning of contact faces and lubrication of threaded elements preserve concentricity and service life. Clear identification by SKU and GTIN supports traceability and spare‑parts matching for effective workshop logistics. Contact Metav Werkzeuge today for technical advice or a compatibility check on Vertex SK‑40 collet chucks (V‑749) and secure the right toolholder solution for precise machining Technical data Article number: V-749 GTIN: 4061905085734 Manufacturer: Vertex ECLASS: 21020405 Facts Diameter: 42 mm Weight: 1.1 kg Taper: SK-40 Special features Collet type: ER-25 compatibility Steep taper for rigid toolholding Asset image: v-745-main.PNG FAQ What collet type does the chuck accept? The V-749 accepts ER‑25 collets, providing versatile clamping for a range of tool shanks. Which spindle taper is required for this toolholder? The chuck is designed for machines with an SK‑40 taper interface. What are the external dimensions and mass of the toolholder? The toolholder has a 42 mm outer diameter and weighs approximately 1.1 kg. Is the V-749 suitable for production environments? Yes, the Vertex V-749 is engineered for reliable, repeatable clamping that supports continuous production use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42mm ER 25 Clamping Nut, M32 x 1.5 Thread, Balanced Sliding Bearing Version - TECWERK
Take advantage of a balanced design and sliding-bearing guidance to reduce vibration and extend tool and spindle life; the M32 x 1.5 thread ensures secure engagement with ER25 collet chucks. Order the item directly via Metav Werkzeuge or consult our advisors for confirmation of fit and suitability. ER collet nut ER25 Ø42 mm – balanced sliding-bearing clamping nut by TECWERK The ER collet nut ER25 Ø42 mm is a balanced, sliding-bearing clamping component designed for secure fastening in ER collet chuck systems. Balanced design for high-speed machining Sliding-bearing for smooth axial guidance Thread M32 x 1.5 for ER25 collet chucks Conforms to DIN 6499, diameter 42 mm Improved clamping reliability for continuous production The balanced design and sliding-bearing construction reduce axial play and minimise vibration during rotation. This results in reduced runout, more consistent clamping force and less wear on the toolholder and spindle, which directly supports longer production runs and fewer unplanned stoppages. For workshops and small-scale production lines, these attributes translate into improved process stability and predictable repeatability. Engineered for precise fit and interchangeability The collet nut uses an M32 x 1.5 thread and is dimensioned for Ø42 mm engagement, matching the geometry specified in DIN 6499 for ER systems. Conformity to this standard ensures compatibility with established ER25 collet chucks and simplifies replacements or retrofits. In practical terms, adherence to the standard reduces setup time and eliminates uncertainty when sourcing replacement clamping components for existing toolholders. Compatibility, installation and operational benefits Designed specifically for ER25 systems, the component is suitable for integration into ER collet chucks where a balanced execution is required. The sliding-bearing version provides smoother axial guidance than rigid nuts, aiding consistent collet compression and release under cyclical loads typical in milling and turning operations. If the precise fit or suitability for a specific chuck type is uncertain, Metav Werkzeuge’s consultants can verify compatibility to ensure the component meets the intended operational demands. For precision clamping with TECWERK’s balanced sliding-bearing ER collet nut, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply. Technical Data Article number: 2000833999NW Product: ER collet nut ER25 Ø42 mm (TECWERK) Product type: ER collet nut Facts Diameter: 42 mm Thread: M32 x 1.5 Suitable for: ER25 Packaging unit: 1 Special features Balanced execution Sliding-bearing version Conforms to DIN 6499 For ER collet chucks FAQ Is this collet nut compatible with ER25 collet chucks? Yes. The ER collet nut ER25 Ø42 mm from TECWERK is designed for ER25 systems and uses an M32 x 1.5 thread to match standard ER25 collet chucks (SKU 2000833999NW). What performance advantage does the sliding-bearing design provide? The sliding-bearing version offers smoother axial guidance and reduced axial play, helping to maintain consistent clamping pressure and lowering wear on the collet and chuck over time when using the TECWERK ER collet nut. Can the balanced execution be used at high spindle speeds? The balanced design is intended to reduce vibration and runout during rotation, making the nut suitable for higher-speed applications where stability and concentricity are required. Does the product meet recognised standards for ER systems? Yes. The component conforms to DIN 6499, ensuring dimensional compatibility and interchangeability within ER25 collet systems. How is the item supplied? The TECWERK ER collet nut ER25 Ø42 mm is supplied as a single unit (packaging unit 1), article number 2000833999NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
42mm ER Collet Chuck SK40 100mm, 2-16mm Clamping Range DIN 69871 Form AD - TECWERK
Take advantage of a compact SK40 taper tool holder with a 2–16 mm clamping range and a 100 mm projection for reliable tool retention and consistent runout control. The combination of DIN 69871 Form AD compatibility and the ER collet system ensures versatile integration into machining centres; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TECWERK ER Collet Chuck DIN 69871 Form AD – SK40, 2–16 mm The TECWERK ER Collet Chuck DIN 69871 Form AD is a steep‑taper tool holder for secure clamping of cylindrical‑shank cutters in ER collets, intended for general milling and drilling operations on machines with SK40 spindles. DIN 69871 Form AD compatibility Clamping range 2–16 mm Steep SK40 taper mount 100 mm projection length Secure tool clamping that reduces runout and saves setup time The ER collet chuck design combines a standardised ER25 interface with a steep taper per DIN 69871 Form AD, providing a compact yet rigid connection between spindle and tool. The ER system accommodates a wide range of cylindrical shank diameters, notably 2–16 mm, which reduces the need for multiple holders and minimises changeover time. The result is improved repeatability and a measurable reduction in tool runout, giving consistent surface finish and longer cutter life. Easy integration and reliable holding force for diverse shop tasks The steep SK40 taper and standardised mounting allow the tool holder to be fitted quickly to compatible machine spindles, delivering a secure clamping force for light to medium machining. With a 100 mm projection and D 42 mm body diameter the unit balances accessibility and rigidity, enabling work on deeper features without excessive overhang. The interface is designed for collets to DIN 6499, ensuring simple collet changes and broad compatibility with commonly used cylindrical‑shank tools. Built for workshop efficiency and predictable performance Engineered for routine production and maintenance shop use, this collet chuck offers predictable performance across repeated cycles. The standard conformity (DIN 69871) and ER system mean spare collets and accessories are widely available, reducing downtime. For procurement teams seeking dependable tooling that simplifies inventory, the holder represents a practical compromise between flexibility and precision, backed by a known industrial standard. Contact Metav Werkzeuge for tailored technical advice on the TECWERK ER Collet Chuck (SKU 2000833709NW) or to request a detailed drawing and delivery options from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000833709NW Label: ER Collet Chuck DIN 69871 Form AD, SK40, Clamping 2–16 mm, A‑L 100 mm TECWERK Type: ER collet chuck Mounting: SK40 Facts Norm: DIN 69871 Form AD Clamping range: 2–16 mm Diameter D: 42 mm Projection A: 100 mm Special features Interface: ER25 / 430 E 1 For clamping cylindrical shank tools to DIN 6499 Packaging unit: 1 Product family: Spannzangenfutter ER FAQ What clamping range does this collet chuck cover? The collet chuck covers a 2–16 mm clamping range, suitable for standard cylindrical shank cutters using ER collets. Is the holder compatible with SK40 spindles? Yes, the tool holder uses a steep taper per DIN 69871 Form AD and is designed for SK40 mounting. Which collet size does the chuck take? The unit is configured for the ER25 collet interface; collets to DIN 6499 fit the holder. Can this tool holder be used for milling and drilling tasks? The chuck is intended for general milling and drilling applications where a compact, rigid tool holder with a 100 mm projection is required. What benefits does DIN 69871 Form AD bring to the workshop? The DIN 69871 Form AD taper provides a standardised, steep‑taper connection that improves rigidity and repeatability when paired with ER collet systems, as used in this TECWERK holder. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
42mm ER Collet Chuck SK40 DIN 69871 Form AD 2-16mm Clamping Range, 60mm Projection - TECWERK
Take advantage of precise clamping with DIN-certified compatibility and a wide 2–16 mm clamping range to maintain steady production cycles; suitable for SK40 toolholders with a 60 mm projection for improved tool reach. Order the component directly via Metav Werkzeuge or consult our specialists for integration advice. TECWERK ER collet chuck DIN 69871 Form AD – SK40, 2–16 mm clamping range The TECWERK ER collet chuck is a DIN 69871 Form AD clamping solution for holding cylindrical-shank cutters in ER collets, designed for SK40-mounted machining centres and toolholders. DIN 69871 Form AD compatibility Clamping range 2–16 mm SK40 taper with 60 mm projection ER25 / 430 E collet interface Consistent precision for repeatable machining The steep-taper design to DIN 69871 Form AD delivers reliably repeatable positioning and reduced runout, essential when accuracy matters. With a 2–16 mm clamping span the chuck supports a wide range of common cutter diameters while preserving concentricity and minimising vibration. The adherence to established standards simplifies tool changes and tooling planning in mixed-production environments, letting operators plan setups with measurable tolerances and predictable outcomes. This benefits shops aiming to reduce rework and increase first-pass yields. Compatibility and mechanical interface explained Built for SK40 spindles, the holder features a projected length A: 60 mm and an outer diameter D: 42 mm, providing a balance between reach and rigidity. The ER25 / 430 E collet interface accepts ER collets per DIN 6499, enabling a modular approach to clamping: swap collets to adapt to different shank sizes without changing the holder. The Form AD steep taper ensures the toolholder seats securely in the spindle, reducing micro-movement during machining. For users unfamiliar with the standards, DIN 69871 relates to the taper and mounting form, while DIN 6499 defines the ER collet geometry. Operational benefits, maintenance and workshop integration The ER-style clamping system offers straightforward maintenance and fast tool change routines, improving uptime on production lines. The compact D: 42 mm body and standard interface mean the chuck integrates easily into existing SK40 tool systems, helping to streamline inventory and reduce tooling complexity. Routine inspections focus on collet wear and taper cleanliness; keeping contact surfaces free from chips and coolant residues preserves rigidity and accuracy. Metav’s quality filter and distribution from Emmerich provide consistent sourcing, making the component a practical choice for workshops seeking reliable, standards-based clamping. For secure, standards-compliant clamping with SK40 compatibility, contact Metav Werkzeuge to discuss the TECWERK ER collet chuck and receive tailored technical guidance from our consultants. Technical data SKU: 2000833708NW Brand: TECWERK Product type: ER collet chuck Core technical data Norm: DIN 69871 Form AD Clamping range: 2–16 mm A: 60 mm D: 42 mm Collet interface: ER25 / 430 E Special features Compatibility: SK40 taper For cylindrical-shank tools in ER collets per DIN 6499 Steep taper Form AD for secure seating Suitable for precision machining and repeatable setups FAQ What is the clamping range of this chuck? The clamping range is 2–16 mm; the TECWERK ER collet chuck (SKU 2000833708NW) accepts ER collets sized to that range for common tool shanks. Is the holder compatible with SK40 spindles? Yes, the unit is designed for SK40 taper spindles and seats to DIN 69871 Form AD for correct mechanical engagement. Which collet size does the chuck use? The chuck uses the ER25 / 430 E collet interface and is compatible with ER collets manufactured to DIN 6499. What do the A and D dimensions indicate? A denotes the projection length, here 60 mm, and D is the body diameter, here 42 mm; both affect reach and rigidity in the tool assembly. What does DIN 69871 Form AD mean for users? DIN 69871 Form AD specifies the steep-taper mounting form for toolholders, ensuring standardised seating and repeatable clamping in compatible spindles. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
42mm ER Collet Nut With Eccentric Ring, M32 x 1.5 Thread - TECWERK
Take advantage of the combination of a balanced execution, an eccentric ring and DIN‑compliant dimensions for reliable, repeatable clamping performance in workshops and production cells; order the clamping nut directly via Metav Werkzeuge or consult our specialists for integration advice. ER clamping nut ER 25, 42 mm with eccentric ring (TECWERK) The ER clamping nut ER 25, 42 mm with eccentric ring is a standard‑execution clamping component for ER collet chucks, designed to ensure secure tool retention and reduced runout. Standard execution with eccentric ring For ER collet chucks ER 25 Thread M32 x 1.5 Balanced design to reduce runout Secure clamping for consistent machining performance A precisely produced clamping nut with an eccentric ring transforms the clamping interface into a predictable element of the toolholding system. The eccentric ring compensates minor axial offsets during tightening, which improves clamping accuracy and reduces the risk of tilted collets under load. Specification conformity with DIN 6499 means simple interchangeability across compatible ER systems, helping to maintain stable cutting conditions and repeatable setups on milling spindles and toolholders. Seamless integration through standardised threads and sizes With a M32 x 1.5 thread and a nominal diameter of 42 mm, this component is matched to ER 25 collet chucks and accepts standard tooling dimensions. The thread profile and size allow for straightforward replacement of worn nuts without modifying existing holders, so downtime is minimised. The measured fit and DIN alignment simplify procurement planning and reduce inventory complexity when multiple machines use the same clamping ecosystem. Reduced vibration and improved runout at higher speeds The item’s balanced execution lowers eccentricity in the rotating assembly, thereby reducing vibration and improving surface finish on workpieces. For operations that demand dimensional accuracy, a balanced clamping nut contributes to lower tool deflection and consistent concentricity, which is particularly beneficial in finishing passes. Where spindle speeds are elevated, the balanced design helps maintain stability and prolongs the service life of collets and toolholders. Practical handling and workshop benefits The standard execution with eccentric ring offers quick assembly and reliable mechanical engagement, enabling maintenance teams to swap components without complex fixtures. The robust construction and conformity to ER dimensions make this clamping element suitable for general workshop use as well as in small manufacturing runs. Clear identification and compatibility with ER 25 reduce setup errors and support lean tooling management across multiple machines. For precise clamping solutions from TECWERK and expert procurement support from Metav Werkzeuge, request a technical consultation or place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000833995NW Product name: ER clamping nut ER 25, 42 mm with eccentric ring Manufacturer: TECWERK Product type: ER clamping nut Packaging unit: 1 Facts Thread: M32 x 1.5 Diameter: 42 mm Suitable for: ER 25 Standard: DIN 6499 Special features Standard execution with eccentric ring Balanced execution to reduce runout Designed for ER collet chucks FAQ What collet size is this clamping nut intended for? This clamping nut is designed for use with ER 25 collet chucks and matches the standard ER 25 dimensions. Which thread is required to fit this nut? The item uses an M32 x 1.5 thread as specified for the component, enabling direct replacement in compatible holders. Does the nut meet industry standards for interchangeability? Yes, the component conforms to DIN 6499, ensuring compatibility with standard ER systems. How does the eccentric ring affect performance? The eccentric ring helps compensate minor axial misalignment during tightening, improving clamping accuracy and reducing collet tilt. Is this product balanced for rotational use? The nut is supplied in a balanced execution, which reduces runout and vibration during rotation. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
42mm ER-25 Collet Chuck For ER Collets, MK Shank — Vertex
Efficient, repeatable workholding with the ER-25 interface and a compact Ø42 mm body. Benefit from precise clamping, low mass and straightforward mounting on machines with a Morse taper spindle. Order directly via Metav Werkzeuge or request tailored advice from our consultants. V-403 Collet Chuck for ER Collets with Morse Taper (ER-25, Ø42 mm) The V-403 collet chuck provides rigid, repeatable clamping for ER collets on machines equipped with a Morse taper spindle, suited to tight fixtures and high-turnover set-ups. Compatible with ER-25 collets Morse taper shank for spindle mounting Compact Ø42 mm body for tight spaces Secure clamping that improves machining consistency The chuck is engineered for precision workholding using standard ER collets, delivering stable grip and repeatable positioning. By pairing the ER-25 interface with a rigid mounting form, the system reduces variability between setups and supports consistent component geometry across batches. This stability helps maintain tool life and process reliability while enabling measurable improvements in finishing and dimensional control. Space-saving design that streamlines workshop layouts A compact outer diameter of Ø42 mm and a lightened mass of 0.4 kg make the chuck suitable for crowded fixtures and multi-tool arrangements where clearance is limited. The Morse taper connection ensures firm axial and radial support with a simple, repeatable mounting routine, reducing downtime between tool changes. The small footprint supports denser tooling configurations without compromising on stability or concentricity. Compatibility that speeds up changeovers and tool handling Designed for use with ER collets, the chuck offers broad tooling versatility and straightforward collet swaps, promoting quick changeover during series production or tool trials. The system integrates into standard clamping workflows and is compatible with widely used ER collet sets, which minimises the need for special adapters and keeps inventory lean. This approach supports efficient production planning and faster reaction to order changes. Reliable sourcing through a dedicated precision partner Sourced from a recognised manufacturer and distributed by Metav Werkzeuge, the chuck benefits from a supply chain that emphasises availability and quality control. Purchasing via Metav brings access to a broad portfolio of compatible accessories and the reassurance of a quality filter based in Emmerich. This supply model supports uninterrupted production and reduces the administrative burden of multi-supplier procurement. Contact Metav Werkzeuge in Emmerich for procurement and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: V-403 GTIN: 4061905086298 Manufacturer: Vertex Diameter: 42 mm Weight: 0.4 kg eClass: 21020405 Compatibility: ER-25 collets Shank type: Morse taper (MK) Category: Vertex SKU: V-403 FAQ Which collet series fits this chuck? The V-403 accepts standard ER-25 collets, allowing use of common ER tooling for a wide range of tool diameters. Can the chuck be mounted directly in a Morse taper spindle? Yes. The chuck is supplied for mounting on spindles or adaptors with the corresponding Morse taper (MK) interface. Is the chuck suitable for tight fixturing and compact setups? Yes. With an outer diameter of 42 mm and a weight of 0.4 kg, the chuck is designed for use in confined fixtures and close-quarter tool arrangements. How does this chuck affect setup repeatability? By combining the ER-25 collet system with a Morse taper mount, the chuck provides stable axial and radial positioning, supporting improved repeatability across successive setups. What is included for installation? The chuck is delivered as the clamping unit compatible with ER-25 collets and intented for direct mounting on a matching Morse taper shank Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42mm ER-25 Collet Chuck High-Precision Tool Holder, 0.7kg - Vertex
Combine compact dimensions, the ER‑25 taper and a lightweight 0.7 kg construction to ensure accurate, repeatable clamping with low spindle load. Benefit from the compact 42 mm profile for tight setups and order via Metav Werkzeuge or consult our technical team for application-specific advice. Collet chuck V-109 — ER‑25, 42 mm (Vertex) A collet chuck engineered for secure, concentric clamping in CNC and milling applications Compact 42 mm profile ER‑25 taper for standard collets Lightweight 0.7 kg spindle load reduction Precision clamping for repeatable centring Consistent concentricity for accurate machining The combination of the ER‑25 taper and a tight 42 mm footprint delivers a clamping solution that prioritises concentricity and repeatability. This design reduces run-out and lowers the risk of rework, translating into higher first-pass yields on precision components. The mechanism is suitable for machine shops that require stable, repeatable engagement between tool and workpiece; in-process errors are minimised and batch consistency is improved through reliable centring. Lower inertia for faster cycle performance With a mass of 0.7 kg, this toolholder reduces spindle inertia compared with heavier alternatives, helping to accelerate spindle speed changes and cut cycle times in dynamic machining sequences. Reduced rotating mass lessens wear on bearings and helps maintain balance at elevated speeds, while the compact diameter contributes to unobstructed tool access in confined fixturing situations. The net effect is a measurable gain in throughput without compromising clamping integrity. Robust design for dependable workshop use Built to integrate with standard collet systems, the unit offers a straightforward mechanical interface that supports routine production demands. The proven geometry of the clamping interface delivers consistent gripping force over repeated cycles, supporting predictable tool life and fewer setup adjustments. The association with Vertex underlines a track record of industrial manufacturing standards and straightforward interchangeability with existing ER‑25 collets and accessories. Seamless integration and reduced setup time Designed for quick installation on compatible spindles, the chuck simplifies changeover and minimises machine downtime. The compact 42 mm form factor allows closer tool spacing and easier access in multi-tool arrangements, while the ER‑25 compatibility ensures a wide choice of collets for different shank sizes. The result is a solution that enhances workshop flexibility and helps maintain flow on mixed-production or small-batch runs. For precise, compact clamping choose the Vertex ER‑25 V‑109 and contact Metav Werkzeuge in Emmerich for stock information and tailored technical guidance Technical Data Article number: V-109 GTIN: 4061905087653 Manufacturer: Vertex Facts Diameter: 42 mm Weight: 0.7 kg Special features Taper: ER‑25 ECLASS: 21020405 Category: Vertex FAQ Which collets are compatible with this chuck? The ER‑25 collet chuck V‑109 from Vertex is compatible with standard ER‑25 collets, allowing a wide range of shank diameters to be gripped reliably. Is the unit suitable for high-speed machining? The lightweight design and ER‑25 interface of the Vertex V‑109 favour lower spindle inertia and stable running at elevated speeds, provided machine and collets are rated accordingly. How does the compact diameter benefit the workshop? The 42 mm profile of the V‑109 enables closer tool spacing and easier access in tight fixtures, which helps reduce setup complexity and improves machining flexibility. Can the chuck be used with existing ER‑25 accessories? Yes, the V‑109 is designed to integrate with standard ER‑25 accessories and collets from Vertex and other manufacturers that adhere to the ER‑25 specification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42mm ER-25 Collet Chuck With Steep Taper For ER Collets - Vertex
The combination of a steep ER-25 taper, a compact Ø42 mm body and a robust 3.4 kg construction delivers reliable clamping and stable machining performance; order the unit directly via Metav Werkzeuge or consult our advisors for application-specific guidance Collet chuck V-749A — ER-25 steep taper, Ø42 mm (Vertex) Collet chuck V-749A for secure clamping of ER collets in milling and drilling setups, optimised for precision and repeatability ER-25 taper compatibility for ER collets Compact Ø42 mm body for tight setups Solid 3.4 kg construction for stability Ideal for high-precision clamping applications Reliable clamping that stabilises machining A compact collet chuck with a steep ER-25 taper delivers consistent axial alignment and repeatable clamping force, reducing tool runout and improving surface finish. The steep taper design transfers clamping forces directly into the spindle interface, increasing contact area and mechanical stability. For workshops seeking predictable results, this configuration supports tighter tolerances and fewer setup adjustments, which in turn reduces cycle times and scrap rates. The unit’s balanced geometry supports productivity in repeated production tasks while the design minimises vibration during cutting operations. Compact design that fits dense workstations With a Ø42 mm body and a 3.4 kg mass, the chuck is engineered for installations where space and mass distribution matter. The compact footprint enables use in confined toolholding arrangements and multi-tool setups, while the mass contributes to dampening minor oscillations under load. The straightforward geometry facilitates quick integration into existing tool chains without extensive modification. Maintenance is simplified by the standard ER system: readily available collets and accessories mean minimal downtime when replacing consumables or adapting the clamping diameter. Clear compatibility and application guidance The chuck is built for use with standard ER-25 collets, offering a familiar interface for operators and service teams. That compatibility ensures fast tool changes and broad availability of collet sizes to match typical shank diameters. Technical identification such as SKU V-749A and the included machine taper information help maintenance planners and procurement to match the component precisely to the spindle interface. For process planners, this product supports stable machining routines where consistent clamping and precise concentricity are priorities, particularly in small to medium-sized parts production. Contact Metav Werkzeuge to specify the right V-749A configuration for the application; Metav’s consultants in Emmerich provide local expertise and reliable supply for immediate integration Technical data Article number: V-749A GTIN: 4061905086120 Manufacturer: Vertex Facts Diameter: 42 mm Weight: 3.4 kg ECLASS: 21020405 Taper: ER-25 Special features Steep taper for ER collets Designed for ER-25 collet compatibility Compact body for confined toolholding Image available: v-745-main.PNG FAQ What collet system does this chuck use? The chuck uses the ER collet system and is compatible specifically with ER-25 collets for standard clamping ranges. Is the chuck suitable for tight installation spaces? Yes, the compact Ø42 mm body is designed to fit in dense toolholding arrangements while maintaining clamping stability. How does the steep taper benefit machining accuracy? A steep taper increases contact area and mechanical rigidity, improving concentricity and reducing runout during cutting operations. Where can the V-749A be ordered or specified? The V-749A collet chuck can be ordered via Metav Werkzeuge; their consultants assist with selection and integration details. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42mm ER-25 Collet Chuck, Precision Toolholder - Vertex
Take advantage of a compact, workshop-friendly clamping solution that combines the familiar ER-25 taper with a manageable Ø42 mm outer diameter and low mass for easy handling. The result is consistent, efficient setup and secure tool clamping — order the unit directly via Metav Werkzeuge or consult Metav's specialists for application advice. Collet chuck V-110 — ER-25, Ø42 mm, Vertex The collet chuck V-110 is a precision clamping device designed for general workshop and light industrial machining where small to medium tooling diameters are required. ER-25 taper for standard collet systems Compact Ø42 mm outer diameter for tight setups Low mass at 1.1 kg for easy handling and mounting Manufacturer: Vertex Precision clamping that supports consistent machining results A well-matched clamping tool reduces downtime and supports repeatable outcomes. The V-110 uses the standard ER-25 system, enabling use with commonly available collets for many small-diameter tools. With an outer diameter of Ø42 mm, the chuck suits confined setups where space is limited while still allowing secure engagement of the collet. The clear technical benefit is reduced setup complexity and reliable gripping force from a recognisable clamping family, which simplifies inventory and tooling decisions in small-batch production or repair work. Compact construction for faster changeovers and easier handling Weighing 1.1 kg, the device is easier to manoeuvre during tool changes and reduces the burden on workholding routines. The compact profile supports closer tool-to-workpiece clearances and helps when retrofitting fixtures or adapting machines with limited spindle envelopes. This physical characteristic translates into practical advantages: quicker mounting, less physical strain for operators, and a smaller footprint in the tooling cabinet — all contributing to improved workshop throughput without additional machinery. Straightforward integration with ER-25 tooling and workshop systems The V-110 is built around the widely used ER-25 taper, which ensures compatibility with standard collets and tooling components. Identified under SKU V-110 and GTIN 4061905086755, the chuck fits into typical clamping workflows and inventory systems, easing procurement and replacement. Supplied by Vertex, the design focuses on tried-and-tested form factors so that the mounting process and spare-part sourcing remain uncomplicated. For shops standardising on ER tooling, this product supports a pragmatic path to consistent clamping across multiple machines. Contact Metav Werkzeuge for tailored advice on integrating the Vertex ER-25 collet chuck V-110 into existing setups — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: V-110 GTIN: 4061905086755 Brand: Vertex Type: Collet chuck Core specifications Outer diameter: 42 mm Weight: 1.1 kg ECLASS: 21020405 Taper: ER-25 Features Taper system: ER-25 Manufacturer: Vertex Thumbnail asset available FAQ Which collet series fits this chuck? The V-110 collet chuck accepts standard ER-25 collets, allowing use of commonly available collet sizes for small to medium-diameter tooling. What is the outer diameter of the device? The outer diameter is 42 mm, a compact profile suited to confined setups and tight tool spacing. How much does the chuck weigh? The Vertex V-110 weighs 1.1 kg, which supports easier handling and faster changeovers in the workshop. Is the chuck suitable for retrofitting older machines? Yes, the ER-25 taper and compact dimensions of the V-110 make it suitable for integration into many existing spindle and fixture arrangements that accept standard ER tooling. How is the product identified for ordering and inventory? The product is listed as SKU V-110 with GTIN 4061905086755, supplied by Vertex for straightforward procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com