Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
400mm Three-Point Reversible Self-Centring Three-Jaw Chuck, 181.5mm Height, 3xM16 - Vertex
Combine robust construction, self-centring three-jaw accuracy and reversible mounting to streamline chucking operations on heavy-duty lathes; order the VSK-16A directly via Metav Werkzeuge or consult our specialists for application advice. VSK-16A – three-jaw self-centring reversible chuck, 400 mm, Vertex The VSK-16A is a three-jaw, self-centring and reversible chuck designed for heavy-duty lathe clamping, delivering secure holding and straightforward switching between front and back mounting. Self-centring three-jaw design Reversible mounting for front/back use 400 mm nominal diameter Robust mass 75.5 kg for increased stability Maximise machine throughput with consistent clamping The self-centring three-jaw concept ensures repeatable positioning and fast part set-up, reducing non-productive time at the spindle. With a nominal diameter of 400 mm and a substantial mass of 75.5 kg, the chuck provides improved dynamic stability during turning, which directly benefits surface finish and tool life. The combination of mass and geometry reduces vibration at typical operating speeds, supporting higher material removal rates and reliable cycle times. Robust design that simplifies daily workshop routines Built for demanding environments, the reversible configuration enables flexible mounting options without complex changeover procedures. The presence of standard M16 threads for mounting points allows secure attachment to compatible lathe faces and backplates. The result is a component that resists deformation under load and maintains clamping accuracy over extended service intervals, translating into fewer resets and predictable production flow. Practical integration for the modern machine shop Compatibility with common lathe interfaces and a compact overall height of 181.5 mm make the chuck straightforward to install within existing setups. The reversible feature removes the need for multiple chucks in many applications, saving fixture space and reducing handling. As part of a broader supply solution from Metav Werkzeuge, the product is backed by a quality-control approach that aims to make precision accessible and dependable across the European market. Contact Metav Werkzeuge for tailored configuration advice and to arrange supply of the Vertex VSK-16A three-jaw chuck for reliable heavy-duty clamping Technical data Article number: VSK-16A GTIN: 4061905091674 Manufacturer: Vertex Dimensions & weight Diameter: 400 mm Height: 181.5 mm Weight: 75.5 kg Mounting threads: 3xM16 Features & compatibility Self-centring, three-jaw chuck Reversible mounting for front/back use Eclass: 21020590 FAQ What is the nominal diameter of this chuck and how does it affect application? The VSK-16A chuck has a nominal diameter of 400 mm, which provides a large gripping surface suitable for medium to large turning operations, improving stability and allowing higher material removal where the lathe capacity permits. Can the chuck be mounted on both sides of the faceplate? Yes. The reversible design of the Vertex VSK-16A allows front and back mounting, enabling flexible fixturing strategies without the need for additional chucks. Which mounting threads are provided for attachment? The chuck is supplied with 3xM16 mounting threads for secure attachment to compatible lathe faces and backplates. How heavy is the chuck and why does that matter? At 75.5 kg, the mass of the chuck contributes to damping vibration and enhancing dynamic stability during turning, which benefits surface finish and tool life. Is the VSK-16A suitable for high-speed small-part turning? The VSK-16A is optimised for heavy-duty clamping; suitability for high-speed small-part turning depends on the machine’s capabilities and the specific application parameters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400mm Waterproof Lamp Halogen Or LED, Light IP67 Arm IP20 - Vertex
Take advantage of robust, workshop-ready illumination that combines a waterproof light module with flexible positioning and simple mains compatibility; order directly via Metav Werkzeuge or consult the Metav team for technical advice. VHL-400S industrial work lamp by Vertex — waterproof light module with 1-joint articulated arm The VHL-400S is a waterproof industrial work lamp designed for inspection benches, assembly stations and maintenance workplaces where reliable, bright illumination is required IP67 light module for wet environments Single-joint articulated arm for precise positioning Compatible with 12 V/50 W halogen or LED modules Mains 110–220 V supply; robust 2.8 kg construction Reliable illumination for damp and demanding environments The light module is IP67 rated, which indicates protection against dust ingress and short-term immersion; this makes the unit particularly suitable for wet production areas and inspection bays where splash resistance is crucial. The lamp accepts 12 V/50 W halogen modules and can alternatively be fitted with LED modules, offering a choice between traditional warm-tone halogen output and more energy-efficient LED lighting. This combination of sealed optics and adaptable light source supports consistent visual inspection results and reduces the risk of corrosion or failure from environmental exposure. The waterproof module also simplifies cleaning procedures in hygiene-sensitive applications. Precise positioning with a compact articulated arm Mounting is handled by a compact single-joint articulated arm, engineered to deliver steady, repeatable positioning for focused work tasks. The arm’s design balances manoeuvrability with stability: at 2.8 kg, the assembly provides sufficient mass to remain stationary during fine operations while still allowing quick realignment. Note that the arm itself carries an IP20 rating, reflecting protection from solid objects but not from liquid ingress; the light head remains the primary sealed component. For metrology benches and close-tolerance assembly, the articulated support improves ergonomics and reduces cycle times by keeping the light source exactly where vision is needed. Easy integration into workshop power and maintenance routines The unit is compatible with standard mains voltages (110–220 V), enabling straightforward installation across diverse electrical supplies without specialist transformers. Compatibility with both halogen and LED modules permits selection according to task requirements: halogen maintains a natural, high-CRI output for colour-critical inspection, while LED options reduce energy consumption and lamp-change frequency. The robust construction and clear separation of sealed light head and articulated mounting simplify routine maintenance and spare-part planning. For production environments seeking dependable, long-term illumination, the lamp’s specification contributes to predictable uptime and reduced operational interruptions. For specification advice or to order the Vertex VHL-400S via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and compatibility with existing setups Technical data Article number: VHL-400S GTIN: 4061905094699 eCl@ss: 27110640 Facts Weight: 2.8 kg Light specification: 12 V / 50 W (halogen) Mains supply: 110 V / 220 V Protection ratings: Light IP67, Arm IP20 Arm: 1-joint Special features Waterproof light module Compatibility with halogen or LED modules Articulated arm for precise alignment Brand: Vertex FAQ What level of water protection does the light provide? The light head is rated IP67, meaning the sealed module resists dust and temporary immersion; the articulated arm is rated IP20 and is not protected against liquids. Can the lamp use LED modules instead of halogen? Yes, the unit is compatible with 12 V/50 W halogen modules or suitable LED replacements, allowing adaptation for energy efficiency or preferred colour rendering. Is the articulated arm suitable for precision inspection tasks? The single-joint articulated arm gives stable, repeatable positioning for close-tolerance inspection and assembly; the lamp’s 2.8 kg construction helps maintain placement once set. Which mains voltages are supported? The lamp accepts standard 110–220 V mains input, enabling installation across varied workshop power supplies without complex converters. Is the unit intended for outdoor use? The sealed light module (IP67) withstands wet conditions, but because the arm is IP20, the assembly is optimised for indoor industrial and workshop environments rather than prolonged outdoor exposure. What SKU should be referenced when ordering spare parts? Reference SKU VHL-400S and the Vertex product designation when enquiring about replacement modules or accessories. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x100 Cross Table Mini Compact Manual XY Stage, 93mm Height - SAIM
Take advantage of the compact 400 × 100 mm platform and stable 11 kg construction to bring precise, repeatable XY positioning to small benches and fixtures; order directly via Metav Werkzeuge or consult their technical team for integration advice. SAIM-400XYG Mini Cross Table — compact 400 × 100 mm XY stage A SAIM-400XYG Mini Cross Table engineered for precise manual positioning and low-profile fixturing in workshops and laboratory benches. Compact 400 × 100 mm platform Stable 11 kg construction Low 93 mm profile for tight setups Precise positioning with a compact footprint The mini cross table delivers a compact footprint that suits crowded benches and small machine tools. The 400 × 100 mm tabletop provides a stable working area for small parts handling and alignment tasks, while the low profile helps to maintain the optical axis in inspection or assembly rigs. This configuration supports precise manual translation and repeatable positioning, reducing time spent on re‑clamping and alignment. Where space is at a premium, the mini cross table keeps workpieces accessible without compromising on control. Stability and repeatability for everyday workshop use At 11 kg, the unit offers a mass that dampens vibration and improves stability during hand‑guided operations, contributing to repeatable setups. The 93 mm height presents a low centre of gravity that benefits fine adjustment work and minimises deflection under small clamping loads. This balance of mass and profile helps maintain consistent results across repeated cycles, making the stage suitable for precision assembly, optical alignment and bench‑scale measurement tasks where steady positioning matters most. Installation and integration made straightforward A technical drawing and product image are supplied with the dataset to assist with mechanical integration; the available technical drawing supports mounting and spatial planning. The stage’s clear identification via GTIN and SKU simplifies procurement and inventory tracking, enabling streamlined ordering and parts management. For systems engineering, the compact dimensions and documented geometry allow straightforward planning for fixtures and adapters without extensive on‑site modification. Practical applications and ease of use The cross table adapts well to small‑component fixturing, inspection jigs and light machining set‑ups where fine XY adjustment is required. The design emphasises practical use: compactness for bench environments, sufficient mass for stability and a form factor that fits into existing workflows. Routine handling and basic maintenance remain simple due to the uncomplicated configuration, which supports long service life in normal workshop conditions. For precise integration and order details for the SAIM-400XYG, contact Metav Werkzeuge in Emmerich – their specialists can advise on compatibility and delivery from their European distribution centre. Technical data Article number: SAIM-400XYG GTIN: 4061905082399 Eclass: 21041714 Label: Kreuztisch Mini Core measurements Platform dimensions: 400 x 100 mm Height: 93 mm Weight: 11 kg Design and features Product type: Mini cross table Manufacturer: SAIM Image assets available: product photo, technical drawing FAQ What are the exact tabletop dimensions of the cross table? The tabletop measures 400 x 100 mm, which defines the usable translation area for positioning and fixturing. Is the construction material specified for the SAIM-400XYG? Material data is not specified in the provided dataset; refer to the supplied technical drawing for mounting dimensions and request material details if required. Is the SAIM-400XYG suitable for bench‑top fixturing and optical alignment? Yes, the SAIM-400XYG mini cross table is suited to bench‑top fixturing and optical alignment thanks to its compact footprint and stable mass. How heavy is the unit and what is its profile height? The unit weighs 11 kg and has a profile height of 93 mm, offering stability with a low centre of gravity. Are technical drawings and images included for planning? Yes, a technical drawing and a product photograph are available with the product assets to support installation planning and integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x100 Cross Table Mini Compact Precision Stage - SAIM
Compact, low-profile design meets reliable positioning: 400 x 100 mm platform and 68.5 mm overall height for precise, space-saving setups. Benefit from dependable XY adjustment and stable support — order the SAIM-400XG through Metav Werkzeuge or consult our specialists for application advice. SAIM-400XG Mini cross table – compact 400 x 100 mm platform, 68.5 mm height A compact positioning table, the SAIM-400XG is intended for fine XY adjustment in confined machine, inspection and assembly environments. Compact low-profile design, 68.5 mm height Platform size 400 x 100 mm for stable setups Precise XY positioning for machining and inspection Robust weight of 8 kg ensures stability Precision positioning in confined spaces The miniature cross table delivers precise XY positioning on a compact footprint. With a 400 x 100 mm platform and a slim 68.5 mm profile, the unit is suited to setups where vertical clearance is limited but micrometric lateral adjustment is required. The low centre of gravity combined with an overall mass of 8 kg reduces vibration and increases stability, which translates into more consistent results when aligning small workpieces for light milling, drilling or metrology tasks. Technical drawings are available to verify mounting and integration in existing rigs. Space-saving layout that improves workflow A compact design reduces bench clutter and allows for closer integration with measuring instruments and small machine tools. The tight dimensions mean the table can be placed in inspection jigs or on limited work surfaces without compromising access to tooling or measuring heads. This arrangement shortens handling time and streamlines process steps, offering a measurable efficiency gain in repetitive positioning tasks without requiring a larger machine footprint. Practical benefits for workshop and lab use Engineered for repeatable adjustment, the cross slide table supports fine incremental movements that simplify set-up and reduce rework. Clear mechanical movement improves alignment accuracy and enables quicker exchange between operations such as light machining, inspection and assembly. For workshop managers and lab technicians seeking consistent results from frequent repositioning, the combination of compact size and repeatable positioning reduces downtime between batches and supports tighter process control. Choosing and integrating the table into existing systems Suitable for tool rooms, inspection benches and small-scale production cells, the table provides a straightforward solution where precise lateral movement is required but space is limited. When specifying the unit, confirm platform mounting and clearance against the supplied technical drawing; Metav Werkzeuge can supply these documents and advise on compatible fixtures. The design supports a wide range of small workholding arrangements and is particularly useful where stable, low-height positioning is a priority. For bespoke setups, technical clarification is available via Metav's consultancy channels. Contact Metav Werkzeuge for tailored configuration and rapid dispatch from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 — request the SAIM-400XG datasheet or integration advice today Technical Data Article number: SAIM-400XG GTIN/EAN: 4061905082382 Label: Kreuztisch Mini Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/0d/af/6b/63/636baf0d5ba163a434b93e44/saim-150x-xg-modelle.jpg Facts Platform dimensions: 400 x 100 mm Height: 68.5 mm Weight: 8 kg eClass: 21041714 Special features Miniature cross table for fine XY positioning Compact footprint for small workbenches Technical drawing available (see assets) Suitable for inspection and light machining tasks FAQ What are the exact platform dimensions? The SAIM-400XG features a platform of 400 x 100 mm, suitable for small workpieces and fixtures. What is the overall height and how does it affect integration? Overall height is 68.5 mm; this low profile helps integrate the SAIM-400XG into confined setups and under measuring heads. How heavy is the cross table and does that aid stability? The unit weighs 8 kg; this mass contributes to positional stability during light machining and inspection operations. Are technical drawings available for planning and mounting? Yes — technical drawings and asset images are provided for the SAIM-400XG to assist with precise mounting and system integration. Manufacturer: SAIM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x100 Cross Table Mini, Precision 50.5mm Height - SAIM
Compact, precise and simple to integrate: the combination of a 400 x 100 mm tabletop, a low profile of 50.5 mm and a lightweight build ensures efficient workstation setup and reliable positioning. Order the SAIM-400X directly via Metav Werkzeuge or consult their technical advisors for tailored delivery and specification support. SAIM-400X – SAIM mini cross table with compact 400 x 100 mm top, 50.5 mm height The SAIM-400X is a compact cross table designed for accurate positioning tasks in small machine shops, inspection benches and tooling jigs. Compact 400 x 100 mm top Low profile 50.5 mm height Lightweight 7 kg for easy handling Precise incremental positioning Improves setup accuracy and reduces repositioning time The compact cross table delivers a measurable improvement in repeatability for small-scale operations. With a 400 x 100 mm working surface and a 50.5 mm installation height, the device minimises the distance between workpiece and tool, helping to cut changeover and alignment times. The restrained footprint and lightweight 7 kg mass make the unit straightforward to manoeuvre and integrate on benches or measuring rigs. Emphasis on stable positioning and fine adjustment translates into fewer corrective passes and more consistent results during machining, assembly or inspection cycles. Fits tight workspaces and integrates without fuss Designed for environments where space is at a premium, the compact design supports efficient layout planning. The low profile and narrow tabletop allow the table to sit close to fixtures, gauges and optical equipment while keeping the overall workstation height low. This configuration improves accessibility for manual operations and simplifies camera or probe alignment in measuring applications. The cross table’s form factor supports modular setups and can be combined with clamping plates or small vises to create a versatile micro-fixture station that enhances throughput in small-batch production. Practical benefits for inspection and light machining Small workshops and metrology benches gain from predictable positioning and repeatable indexing when using this cross table. The robust, straightforward design limits unnecessary complexity while offering a reliable platform for fine positional control. For measuring tasks, the low height helps bring parts within the focal range of microscopes and optical sensors; for light machining, the compact surface concentrates operations and helps stabilise the workpiece. The result is a practical accessory that supports consistent quality control and more efficient manual processes with minimal setup overhead. Contact Metav Werkzeuge for a detailed specification sheet and delivery options for the SAIM-400X; technical advisors are available from Emmerich to assist with integration and dispatch. Technical data Article number: SAIM-400X GTIN: 4061905082368 SKU: SAIM-400X Specifications Table top dimensions: 400 x 100 mm Height: 50.5 mm Weight: 7 kg eClass: 21041714 Features and applications Model designation: Kreuztisch Mini Compact cross table for precision positioning Suitable for small machine shops and inspection benches Gallery images available for technical drawing and models FAQ What primary applications suit this cross table? The SAIM-400X cross table is suitable for precision positioning tasks on small machine tools, inspection benches and assembly jigs where a compact footprint is required. What are the exact tabletop dimensions? The working surface measures 400 x 100 mm, providing a compact but practical area for small components and fixtures. How tall is the unit and why does that matter? The unit height is 50.5 mm, a low profile that aids integration with measuring devices and keeps parts close to tooling and optical sensors. Is the cross table easy to move between workstations? With a weight of 7 kg the SAIM-400X can be repositioned by workshop personnel for flexible workstation layouts while remaining stable during use. Can the SAIM-400X be combined with clamping accessories? The design supports integration with small clamping plates and vises to create stable micro-fixture setups for inspection and light machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x280mm 90° Clamping Angle With T‑Slots M12, 400x400mm Table - Vertex
Take advantage of the combination of a true 90° clamping surface, M12 T-slots for flexible fixtures and a substantial footprint for stable setups; order the unit directly via Metav Werkzeuge or consult the team for application advice. BP22-40 Angle plate — Vertex 90° clamping with M12 T‑slots The BP22-40 is a robust 90° angle plate designed for precise right‑angle fixturing in machine shops and inspection benches Precision 90° clamping surface M12 T‑slots for flexible fixturing Measuring table 400 x 400 mm Solid base 400 x 280 mm Stable 90° support for repeatable setups A solid right‑angle support is fundamental for repeatable fixturing. This angle plate provides a true 90° reference surface that reduces setup time and helps maintain machining and inspection tolerances. Built to resist twist under load, the construction offers clear benefits for jigs, fixtures and measurement tasks where precision and repeatability are decisive. The sturdy mass improves vibration damping, contributing to more consistent results across production runs. Flexible fixturing enabled by M12 T‑slots Integrated M12 T‑slots allow a wide range of clamping options without the need for bespoke plates. Contractors and workshop technicians can mount clamps, stop blocks and locator pins directly to the table to create customised fixturing arrangements. This modular approach shortens preparation time and increases machine uptime, delivering measurable efficiency gains. The T‑slot pattern supports both simple and complex setups while keeping the workpiece location stable during machining or metrology operations. Workshop‑ready dimensions that simplify handling and integration With a measuring table of 400 x 400 mm and a base of 400 x 280 mm, the unit balances a generous work area with a compact footprint for bench or machine integration. The design supports common vice and clamp sizes and fits easily on inspection benches or milling machine tables. A weight of 114.2 kg provides a low centre of gravity and improved stability for heavy fixturing, reducing the need for additional bolting in many shop environments. These characteristics make the plate suitable for repeatable production and quality inspection tasks where stable referencing is required. Confidence through proven manufacturing and practical application Produced by Vertex, the device follows established quality practices for clamping technology and is supplied with clear identification for compatibility with standard workshop tooling. The combination of a true right‑angle datum, a usable table area and universal T‑slot compatibility promotes operational reliability and reduces the risk of misalignment during critical operations. For workshops seeking dependable referencing without complex preparation, the plate delivers a practical balance of stability and flexibility. Contact Metav Werkzeuge in Emmerich for tailored application advice and to arrange supply of the Vertex BP22-40 angle plate via email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: BP22-40 GTIN: 4061905085154 Brand: Vertex Core specifications Measuring table: 400 x 400 mm Base (foot): 400 x 280 mm T‑slots: M12 Weight: 114.2 kg Special features 90° clamping angle T‑slots for versatile fixturing Suitable for machine bench and inspection use FAQ What size are the T‑slots on this angle plate? The angle plate is equipped with M12 T‑slots, allowing standard M12 clamping hardware to be used for fixture assembly with the Vertex BP22-40. What are the working table dimensions? The unit offers a measuring table of 400 x 400 mm, providing a broad reference area for fixturing and measurement tasks. How heavy is the plate and what does that mean for stability? The plate weighs 114.2 kg, which contributes to a low centre of gravity and improved stability for machining and inspection set‑ups. Is this plate suitable for use on a milling machine table? Yes, the combination of the 90° datum and M12 T‑slots makes the plate suitable for bench or machine table clamping and typical workshop fixturing operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x300mm 90° Clamping Angle With M16 T-Slots, 400x400mm Table, 111.2kg - Vertex
Take advantage of a precision 90° clamping solution with integrated T-slots and a substantial base for vibration-free set-ups; the unit’s heavy mass ensures exceptional stability while the M16 T-slots permit standardised clamping hardware. Order the BP22-840 angle plate directly via Metav Werkzeuge or consult the specialists if clarification is required. BP22-840 angle plate by Vertex — 90° with M16 T-slots A robust BP22-840 angle plate engineered for accurate 90° clamping in machining and metrology environments. 90° angle plate with T-slots T-slot size M16 Large base 400x300 mm Measuring table 400x400 mm Precise right-angle set-ups that cut cycle time Accuracy in fixturing translates directly into fewer reworks and more predictable cycle times. The 90° orientation of this angle plate provides a reliable datum for perpendicular faces, while the integrated T-slots accept commonly used fixtures and clamps, giving flexibility for a wide range of workpiece sizes. The 400 x 300 mm base and separate 400 x 400 mm measuring table enable both stable machining and inspection workflows on one support, reducing part transfers. Together these attributes minimise alignment checks and support a smoother production flow for batch and single-piece work. Stability and durability to protect surface quality Mass and geometry matter when surface finish and dimensional accuracy are critical. At 111.2 kg, the clamping unit dampens vibration and resists movement under cutting forces, so workpieces remain true to position during milling, drilling or inspection operations. The solid construction reduces the risk of chatter marks and helps maintain consistent tolerances across runs. This stability not only preserves component quality but also lowers downstream correction costs, contributing to a more economical production process. Compatibility with standard workshop tooling for flexible workflows Built with workshop integration in mind, the slotted configuration accommodates M16 fastenings, enabling use with a wide selection of clamps, bolts and locating elements. The combination of a sizeable foot plate and a dedicated measuring surface simplifies the transition from machining to measurement without the need for complex re-fixturing. For operations that demand traceability and repeatability, the angle plate supports systematic set-ups that align with inspection routines and fixture libraries, ensuring that workholding remains repeatable across shifts and operators. For specification guidance and supply via Metav Werkzeuge — including procurement advice and delivery options from Emmerich — contact Metav Werkzeuge’s team of application specialists to discuss how this Vertex angle plate fits existing fixtures and measurement processes Technical Data SKU: BP22-840 GTIN: 4061905086533 Manufacturer: Vertex Core specifications Orientation: 90° Foot/base: 400 x 300 mm Measuring table: 400 x 400 mm Weight: 111.2 kg T-slot: M16 ECLASS: 21020601 Features & compatibility Integrated T-slots for modular clamping Designed for stable machining and inspection set-ups Compatible with standard M16 clamping hardware FAQ What is the primary purpose of the angle plate? The BP22-840 angle plate is designed to establish a precise 90° datum for machining and inspection, enabling stable fixturing and repeatable set-ups. Which T-slot size is provided, and what does that mean for fixtures? The unit features M16 T-slots, which accept widely used M16 bolts and clamps, allowing compatibility with common workshop clamping systems. Are there separate surfaces for machining and measurement? Yes, the product includes a 400 x 400 mm measuring table in combination with a 400 x 300 mm base to streamline transitions between machining and inspection tasks. How does the weight of the unit influence performance? At 111.2 kg, the mass increases stability and reduces vibration, which supports better surface finish and more consistent dimensional results during cutting operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x310mm LED Lamp Reinforced 12V/6W, 220V - Vertex
Compact, adjustable workshop lighting that combines low energy consumption and precise positioning. The articulated arm and focused 6W LED deliver consistent illumination for inspection and assembly tasks; order the LED lamp directly via Metav Werkzeuge or ask our consultants if needed. VLED-30L LED lamp with articulated arm and low-energy illumination — Vertex The VLED-30L is a compact LED lamp designed for bench and inspection lighting, supplying focused brightness for workshop and precision tasks. Articulated arm 400x310 mm for precise positioning Low-energy 6W LED with 12V light output Mains-compatible 220V input for easy integration Lightweight design at 2 kg for flexible use Improved inspection quality with focused, low-energy light The compact worklight delivers a concentrated beam from a 6W LED source, providing consistent, shadow-reduced illumination that supports visual inspection and fine assembly. With a 12V light output matched to a 220V mains supply via internal conversion, the fitting reduces heat generation and stabilises colour rendition, which helps maintain measurement accuracy and reduces visual fatigue during extended tasks. The efficient light source is especially useful where defined contrast and steady luminance are required for quality checks. Precise positioning thanks to a compact articulated arm An articulated arm measuring 400x310 mm offers a balance between reach and compactness for typical bench setups. The arm geometry enables localized, accurate repositioning of the lamp head without taking up excessive workspace, allowing operators to direct light exactly where needed. At approximately 2 kg, the assembly remains manageable for re-positioning and temporary removal, while still providing sufficient rigidity for stable, vibration-resistant illumination during precision operations. Energy efficiency and practical mains compatibility This LED fitting is engineered for low running costs: the combination of a 6W light source and modern LED technology keeps energy consumption modest while offering long operating life and reduced maintenance compared with traditional lamps. The unit is configured for 220V mains input, simplifying installation in standard workshop and industrial environments and enabling reliable operation on typical supply voltages without additional transformers or adaptors. Workshop-suitable construction with straightforward integration Rated IP20, the lamp is intended for indoor use on workbenches and inspection stations rather than outdoor or high-humidity environments. The design includes reinforced components for everyday workshop handling, ensuring the lamp remains a dependable part of a toolroom or production bench. High-resolution images and technical illustrations are available for integration planning and space assessment to confirm compatibility with existing workstations. For procurement, technical clarification or to arrange delivery via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will assist with specification matching and order handling. Technical data Article number: VLED-30L GTIN: 4061905083730 eClass: 27110640 ETIM: EC001959 Brand: Vertex Key measurements Arm reach: 400 x 310 mm Light specification: 12V / 6W Power supply: 220V Weight: 2 kg Special features Protection class: IP20 Product type: LED lamp Reinforced design Image assets available (VLED-30L-main.png, VLED-30L-detail.png) FAQ What voltage and power does the lamp require? The VLED-30L LED lamp operates from a 220V mains supply with a 12V / 6W LED light output, providing low-energy illumination suitable for bench applications. Is the lamp suitable for inspection and assembly tasks? Yes. The focused light and articulated arm of the VLED-30L make it well suited to inspection, assembly and other precision tasks where steady, localized illumination is required. How compact is the lamp’s reach and can it be repositioned easily? The articulated arm measures 400 x 310 mm and allows precise repositioning; the overall weight of about 2 kg facilitates handling without compromising stability. Can the lamp be used outdoors or in humid environments? The fitting is rated IP20 and is intended for indoor workshop use; it is not designed for outdoor or high-humidity environments. Which brand manufactures this LED lamp and what is the SKU? The LED lamp is manufactured by Vertex and listed under SKU VLED-30L, suitable for workshop bench and inspection lighting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x400mm Floodlight Waterproof Lamp Halogen or LED, Light IP67 Arm IP65 110V/220V - Vertex
Reliable workshop illumination with robust IP protection and flexible power options ensures consistent inspection performance; combine the IP67-sealed lamp head, IP65 arm and dual 110V/220V compatibility for dependable operation in damp or industrial environments. Order the VHL-500L directly via Metav Werkzeuge or ask our consultants if needed. VHL-500L — Industrial inspection lamp with waterproof head and articulated 400×400 mm arm (Vertex) The VHL-500L is a waterproof inspection lamp designed for workshop and industrial environments, offering a sealed lamp head, an articulated arm for precise positioning and compatibility with halogen or LED light sources. *Waterproof lamp head IP67 protection *Arm with IP65 protection for durability *Dual voltage 110V / 220V compatibility *Articulated 400×400 mm arm for precise positioning Robust protection for continuous inspection work The sealed lamp head with IP67 rating and the arm with IP65 protection offer robust defence against dust and moisture, allowing uninterrupted use in demanding shop floors and near-coolant operations. This level of ingress protection reduces maintenance intervals and the risk of electrical faults, which in turn supports steady production flow and fewer unplanned stops. Built to withstand workshop conditions, the fixture provides a reliable light source where repeatable visual inspection and close work are essential. Flexible power and light-source options to match workflows With 110V/220V compatibility and support for halogen units (12V/50W–24V/50W) as well as an LED variant, the lamp adapts to different electrical setups and illumination needs. The halogen spec delivers concentrated, high-contrast light for detail work, while the LED option offers improved long-term energy efficiency and reduced heat output. Choosing the appropriate light source balances inspection clarity and running costs, allowing selection according to task duration and ambient conditions. Precise positioning for ergonomic and accurate inspection The articulated 400×400 mm arm allows fine adjustment of the light field for targeted illumination of small components and measurement areas, improving accuracy and reducing operator strain. The assembly is compact yet stable, with a total mass of 4 kg that supports steady placement without excessive sag. This combination of reach and rigidity makes the lamp suitable for benches, measuring tubs and assembly stations where repeatable alignment of light and workpiece improves inspection quality. For advice on specification or to arrange supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930—our consultants will confirm compatibility and delivery from stock Technical data SKU: VHL-500L GTIN: 4061905094002 Manufacturer: Vertex Machinery Works Co., Ltd. ECLASS: 27110640 ETIM: EC001959 Core specifications Rated voltage: 110V / 220V Lamp options: 12V/50W–24V/50W (halogen), LED option Protection rating: Head IP67; arm IP65 Arm reach: 400×400 mm Weight: 4 kg Features and applications Suitable for workshop and industrial inspection Articulated arm for precise positioning Waterproof head for wet environments Available with halogen or LED light sources FAQ Is the lamp suitable for use near coolant or in damp areas? The lamp head is IP67-rated and the arm IP65-rated, so the VHL-500L from Vertex is suitable for damp environments and areas with occasional splashing, supporting reliable operation in such conditions. Can the fixture be used on different supply voltages? Yes, the VHL-500L supports 110V/220V supply voltages and is available with halogen or LED light sources to match local electrical standards and illumination preferences. What halogen specifications are available and is there an LED alternative? Halogen options are specified as 12V/50W to 24V/50W; an LED version is also offered to reduce heat and improve energy efficiency while maintaining inspection quality. How much reach and manoeuvrability does the arm provide? The articulated arm measures 400×400 mm, providing precise positioning for targeted illumination of small components and measurement areas. What is the weight and how stable is the lamp during adjustments? The complete unit weighs 4 kg, offering a balance between ease of positioning and stability to prevent sagging during fine adjustments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x400mm Halogen Lamp Dust-Protected, 110/220/380/24V, IP67 Light IP65 Arm, Cable 1.8m - Vertex
Take advantage of the robust combination of dust protection, flexible voltage options and a practical articulated arm to keep inspection and assembly stations illuminated without interruption; order the unit directly via Metav Werkzeuge or request advice from our consultants. VHL-300LR halogen lamp — dust-protected industrial illumination with selectable voltages (Vertex) A reliable VHL-300LR halogen lamp for dust-protected workshop and machine illumination, offering flexible voltage options and a stable articulated arm for precise positioning Dust-protected design, IP67 light / IP65 arm Selectable voltages: 110 / 220 / 380 / 24 V Supplied with 1.8 m power cable Stable 400 x 400 mm arm, weight 4.4 kg Robust protection for uninterrupted workplace lighting The unit features a dust-protected construction with a light IP67 rating and an arm IP65, ensuring reliable operation in dusty or industrial environments. The halogen light source delivers consistent illumination suitable for inspection and detailed assembly tasks; this reduces the risk of visual errors and minimises downtime caused by failed lamps. The enclosed design keeps internal components shielded from particulate ingress, which supports longer service intervals and dependable performance under workshop conditions. Flexible power configuration simplifies installation With selectable voltages (110/220/380/24 V) the lamp adapts to a wide range of supply systems commonly found across industrial facilities, allowing integration without additional transformers in many cases. The inclusion of a 1.8 m cable supports straightforward mounting close to existing power points and reduces initial installation effort. The electrical flexibility translates into operational efficiency: fewer spare variants are required, stocking is simplified and compatibility across different machines or worksites is increased. Practical reach and handling to support assembly tasks The articulated 400 x 400 mm arm provides targeted positioning so workpieces and inspection areas are evenly lit, improving visibility where it matters most. At 4.4 kg the assembly combines stability with the possibility of repositioning the unit as workflows change, supporting versatile use across workbenches and production cells. Supplied with the power cable, the lamp is ready for quick deployment; Metav’s technical advisors can assist with configuration choices to match specific workstation layouts or mounting preferences, ensuring the lighting solution complements existing processes. For robust, dust-protected illumination from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and ordering — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Product specifications Article number: VHL-300LR GTIN: 4061905089909 Eclass: 27110334 Weight: 4.4 kg Arm: 400 x 400 mm Core technical data Voltage options: 110 / 220 / 380 / 24 V Light IP rating: IP67 Arm IP rating: IP65 Cable: 1.8 m included Special features Dust-protected construction Halogen light source Supplied ready for installation Brand: Vertex FAQ What protection ratings does the lamp have? The lamp offers a light IP67 rating for the head and IP65 for the arm, ensuring dust protection suitable for many industrial work environments when using the VHL-300LR halogen lamp. Which voltages are supported by the unit? The VHL-300LR supports 110 / 220 / 380 / 24 V, providing flexible integration into different supply systems without the need for multiple product variants. Is a power cable included with the lamp? Yes, the VHL-300LR is supplied with a 1.8 m power cable, facilitating immediate connection during installation. How large is the articulated reach and how heavy is the unit? The articulated reach is 400 x 400 mm and the lamp weighs 4.4 kg, offering stable positioning with practical handling for repositioning when required. Who manufactures the lamp and where is it made? The lamp is manufactured by Vertex; full manufacturer details are provided below. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x400mm Lamp Waterproof Halogen Or LED, Light IP67 Arm IP20/65 - Vertex
Combining robust IP67 light protection, an articulated 400 x 400 mm arm and versatile 110–220 V supply, the unit delivers reliable, focused illumination for inspection and assembly tasks. Order the VHL-400L directly via Metav Werkzeuge or ask our consultants if needed. VHL-400L Vertex industrial lamp — 400 x 400 mm arm, IP67 light The VHL-400L is an articulated workshop lamp designed for precise inspection and assembly work in industrial environments, available in halogen or LED versions. 400 x 400 mm articulated arm 12V/50W halogen light with IP67 protection Dual-voltage 110–220V mains compatibility Consistent, high-contrast illumination for precise inspection The lamp provides a stable 12 V/50 W halogen light source designed to deliver clear, high-contrast illumination that supports fine visual work. The IP67 rating for the light head indicates protection against dust ingress and temporary immersion, ensuring that the light optics remain uncontaminated in demanding workshop environments. For operations where consistent colour rendering and bright point illumination matter, the halogen option offers immediate light without flicker; LED variants are listed as available for longer life and reduced heat output. This clarity reduces inspection time and helps maintain production quality. Flexible positioning that improves workflow efficiency An articulated 400 x 400 mm arm enables accurate positioning of the light head across a broad working envelope, reducing the need to reposition workpieces. The arm’s reach and adjustability support ergonomic placement for repetitive tasks, minimising downtime during setup and changeover. At an overall weight of 3.8 kg, the unit is stable yet manageable for workshop mounting, so the lighting stays where it is set without drift. Precise beam placement aids assembly and inspection, allowing operators to maintain consistent visual standards across multiple parts or stations. Designed for industrial power environments and long service life The unit accepts a wide supply range (110–220 V), simplifying integration into different mains systems without additional transformers. The lamp’s halogen head runs at 12 V, driven from the supplied power electronics, delivering reliable output across standard workshop voltages. Robust construction and a service-oriented design reduce failure modes and help keep maintenance predictable. Clear labelling and standardized parts support fast replacement and continuity of operations, contributing to a lower total cost of ownership over the product life. A trusted supply chain that supports precision workshops Sourcing the lamp through Metav Werkzeuge provides access to a European supply centre that acts as a quality filter for buyers. Metav’s long-standing presence and broad product range mean procurement is simplified and stock continuity is prioritised for workshop-critical items. The combination of dependable delivery from Emmerich, a large product portfolio and a history of trusted service supports operational planning and reduces the risk of production interruptions, making the lamp a pragmatic choice for maintenance and inspection applications. Contact Metav Werkzeuge for tailored advice on the Vertex VHL-400L lamp and available configurations; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast support and dispatch from Emmerich Technical data SKU: VHL-400L GTIN: 4061905084300 ETIM: EC001959 ECLASS: 27110640 Arm: 400 x 400 mm Light: 12V/50W (halogen) Voltage: 110V/220V Weight: 3.8 kg Protection (light): IP67 Core figures Weight: 3.8 kg Arm dimension: 400 x 400 mm Light power: 50 W Light voltage: 12 V Supply voltage: 110–220 V GTIN: 4061905084300 Features & versions Available versions: halogen or LED Waterproof light head (IP67) Articulated arm for precise positioning Product and detail images available FAQ Is the light head of the VHL-400L suitable for wet environments? The light head on the VHL-400L is rated IP67, which protects the lamp optics from dust and temporary immersion, making it suitable for wet or splash-prone areas where the light assembly may be exposed. Can the lamp be supplied for different mains voltages? Yes, the VHL-400L accepts 110–220 V mains, allowing straightforward integration into varied industrial power systems without additional conversion equipment. Are LED versions available instead of halogen? The VHL-400L is offered in halogen and LED variants; the halogen model provides 12 V/50 W output while LED versions deliver longer service life and lower heat generation. How does the articulated arm improve inspection tasks? The 400 x 400 mm articulated arm enables precise, repeatable positioning of the light source, reducing set-up time and improving visual access during detailed inspection or assembly operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x400mm Square Inspection Lamp Three-Point Waterproof Light IP67/Arm IP20 9W LED 110V/220V, Cable 1.8m - Vertex
Take advantage of the combination of 9 W LED efficiency, IP67 protection for the light unit and the supplied 1.8 m cable to keep workshop lighting reliable and low-maintenance; order the unit directly via Metav Werkzeuge or contact our consultants for specification support. VLED-400L LED work lamp — waterproof, compact industrial illumination (Vertex) The VLED-400L is a compact LED work lamp designed to provide reliable, protected illumination for workshop and industrial environments under variable mains voltages. 9 W LED for low energy consumption Light IP67 protection for wet environments Compact 400 x 400 mm square reflector Includes 1.8 m power cable and mounting arm Consistent, protected light for continuous operation The lamp delivers stable LED illumination while the light unit benefits from IP67 ingress protection, reducing the risk of moisture-related failures in harsh environments. The arm is specified as IP20, meaning the fixture’s support structure is suited to indoor workshop conditions while the light head itself withstands wet and dusty conditions. Combined with compatibility for 110V/220V supplies, this configuration supports uninterrupted operation across common workshop power systems, helping to reduce downtime and protect inspection and assembly processes. Practical dimensions and easy deployment save time A square working surface of 400 x 400 mm and a total weight of 2.12 kg make the fixture compact enough for mobile positioning yet substantial enough for stable mounting. The lamp is supplied with a 1.8 m power cable to simplify initial installation and shorten setup time on the shop floor. The modest power rating of 9 W reduces electrical load and heat output compared with higher‑power alternatives, which benefits enclosed workstations and close‑proximity inspection tasks by maintaining a cooler, safer working environment. Designed for workshop and industrial use with flexible options Specified as a waterproof lamp and offered in an LED configuration, the fixture is appropriate for general workshop illumination, assembly benches and inspection stations where consistent, splash‑resistant lighting is required. The electrical compatibility with 110V/220V mains supports installations across varied sites. Supplied by Vertex through Metav Werkzeuge, the product is integrated into a distribution approach that emphasises dependable supply and a European quality filter for industrial customers. For supply, specification or rapid delivery from Metav Werkzeuge’s Emmerich warehouse, contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the Vertex VLED-400L LED lamp and confirm suitability for the intended application Technical data SKU: VLED-400L GTIN: 4061905088193 Manufacturer: Vertex Core specifications Power supply: 110V/220V Light rating: 9 W (LED) Weight: 2.12 kg Arm / reflector footprint: 400 x 400 mm (square) Cable included: 1.8 m Protection: Light IP67, Arm IP20 Special features Waterproof light head LED configuration Compact, square working area FAQ What level of ingress protection does the lamp offer for wet areas? The light head of the VLED-400L is rated IP67, providing protection against dust ingress and temporary immersion in water, while the arm is rated IP20 for indoor mounting stability. Is the fixture compatible with different mains voltages? Yes, the VLED-400L supports 110V/220V operation, making it suitable for a variety of workshop and industrial power supplies. What cabling and mounting accessories are supplied? The lamp is supplied with a 1.8 m power cable; the listed arm dimensions are 400 x 400 mm, and the unit’s overall mass is 2.12 kg, facilitating straightforward mounting and repositioning. Can the VLED-400L be used where halogen fixtures are currently installed? The VLED-400L is provided in an LED configuration that can replace higher‑consuming lighting types; confirm mounting and electrical compatibility against existing halogen installations before replacement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x400mm Waterproof LED Inspection Lamp 9W, 110V/220V, IP67 Cable Included - Vertex
Take advantage of the combination of IP67 protection, low‑power 9 W LED illumination and broad voltage compatibility for dependable workshop lighting. Order the lamp directly via Metav Werkzeuge or consult the team for application-specific advice. VLED-500L LED work lamp by Vertex — IP67, 9 W The VLED-500L is a waterproof industrial work lamp designed for robust workshop and site use, suitable for 110 V or 220 V supplies and available with halogen or LED light sources. IP67 protection for wet environments Energy-efficient 9 W LED illumination Dual voltage 110/220 V compatibility Incl. 1.8 m connection cable Industrial-grade lighting that keeps production moving The VLED-500L delivers IP67‑rated protection, ensuring reliable operation in dusty or wet conditions where standard fixtures fail. The combination of a 9 W LED module and a compact fixture design provides bright, focused illumination while keeping energy consumption low; this reduces running costs and mitigates heat build‑up at the workplace. For workshops that require continuous or intermittent task lighting, the robust protection class reduces unplanned downtime caused by ingress or corrosion, supporting stable production flows. Flexible installation for varied workspaces The lamp’s 110 V / 220 V compatibility allows deployment across different electrical environments without modification, simplifying procurement and fleet standardisation. An included 1.8 m cable enables immediate connection and temporary relocation between workstations, while the 400 x 400 mm (round) arm provides a practical mounting footprint for bench or machine‑mounted setups. With a mass of 2.42 kg, the unit balances portability and stability, making it suitable for mobile workshops and fixed installations alike. Low maintenance and adaptable lighting options Designed for long service life, the fixture accepts either halogen or LED modules where specified, but the energy-efficient LED option reduces maintenance intervals and lamp replacement frequency compared with filament sources. The compact LED module emits less waste heat and is less sensitive to vibration, which benefits precision workshop environments. Clear technical classification (eClass and ETIM) and the inclusion of a fitted cable streamline logistics and installation, enabling faster commissioning and limited on‑site adjustments. Contact Metav Werkzeuge to check the VLED-500L’s fit for specific workshop tasks or to request a detailed specification for your site; Metav’s consultants can advise on configuration and delivery from their Emmerich quality hub Technical data Article number: VLED-500L GTIN: 4061905005732 Manufacturer: Vertex Core technical data Protection class: IP 67 Supply: 110 V / 220 V Light output: 9 W (LED) Weight: 2.42 kg Arm: 400 x 400 mm (round) Features and accessories Waterproof construction Incl. 1.8 m cable Suitable for halogen or LED eClass: 27110640 ETIM: EC001959 FAQ What environments is the lamp suitable for? The VLED-500L is designed for industrial and workshop use and its IP67 rating allows operation in dusty and wet conditions where typical indoor light fittings would be unsuitable. Can the lamp operate on different voltages? Yes. The VLED-500L accepts 110 V / 220 V supplies, enabling deployment across sites with differing mains voltages without additional converters. Is a connection cable included? A 1.8 m cable is supplied with the VLED-500L to simplify installation and allow immediate use on site. Does the lamp come with LED fitted? The product description notes availability with either halogen or an LED module; the LED variant is energy‑efficient and reduces maintenance compared with filament lamps. How heavy is the unit and how large is the mounting arm? The lamp weighs 2.42 kg and features a 400 x 400 mm (round) arm dimension suited to common bench or machine mounting arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
405mm Hydraulic Chuck 4,500 kgf Clamping Force, 1,500 rpm, 0.03mm Accuracy - Vertex
Combining 4,500 kgf clamping force, a 405 mm diameter and 0.03 mm accuracy delivers secure, repeatable workholding for heavy parts and demanding turning operations. Benefit from a substantial 82.3 kg construction that improves stability and reduces vibration during machining. Order the unit directly via Metav Werkzeuge or consult their specialists for integration advice. VSK-16 clamping chuck by Vertex — 405 mm diameter, 4,500 kgf clamping force A robust VSK-16 clamping chuck engineered for heavy-duty workholding on lathes and machining centres, offering secure part retention and consistent concentricity for precision turning and finishing operations 405 mm diameter for large workpieces 4,500 kgf clamping force 0.03 mm accuracy for precise runout Suitable up to 1,500 r.p.m. Reliable performance under heavy load The VSK-16 combines a high clamping force with a large-diameter interface to secure substantial components during machining. A rated 4,500 kgf clamping force reduces the risk of part movement and enables more aggressive cutting parameters, which can shorten cycle times and improve throughput. The chuck’s considerable 82.3 kg mass also contributes to machining stability by damping vibrations, resulting in smoother surface finishes and prolonged tool life. For production environments where part slippage is not an option, this workholding solution supports consistent, measurable outcomes. Precision that protects part quality Accuracy is central to dependable workholding. With a specified 0.03 mm accuracy, concentricity and runout are minimised, which is critical for components requiring tight dimensional tolerances. For users less familiar with runout terminology: this value indicates the maximum radial deviation between the clamped part and the spindle axis, so a lower figure means better alignment. The combination of stable centring and precise grip reduces rework and scrap rates, translating into predictable quality control and a lower cost per part in series production. Integration and operational advantages Designed for practical workshop integration, the chuck supports rotational speeds up to 1,500 r.p.m., matching a broad range of turning and finishing operations without compromising safety margins. The robust construction and standardised interface simplify mounting and maintenance routines, while its large diameter makes it suitable for workpieces that would challenge smaller devices. Where mass and rigidity matter for vibration control, the unit’s weight and build quality provide tangible benefits for surface integrity and dimensional stability across diverse applications. Contact Metav Werkzeuge for tailored advice on integrating the VSK-16 into existing machinery and to arrange prompt delivery from Emmerich. Technical data Article number: VSK-16 GTIN: 4061905096099 Manufacturer: Vertex Core specifications Diameter: 405 mm Clamping force: 4,500 kgf Accuracy: 0.03 mm Maximum speed: 1,500 r.p.m. Weight: 82.3 kg Features ECLASS: 21020590 SKU/UID: VSK-16 Image file: VSK-4-main.png FAQ What clamping force does the chuck provide? The VSK-16 clamping chuck delivers a rated clamping force of 4,500 kgf, providing secure retention for heavy-duty turning tasks. What accuracy can be expected for concentricity? Accuracy is specified at 0.03 mm, which limits radial runout and supports components with tight tolerance requirements. What diameter of workpiece can be accommodated? The chuck has a 405 mm diameter interface, making it suitable for larger workpieces typically encountered in heavy turning operations. What is the maximum permissible speed for this chuck? The unit is rated for operation up to 1,500 r.p.m., aligning with standard turning and finishing speed ranges for medium to large parts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
405mm Spannfutter mit 3 Backen, Klemmkraft 4500 kgf, Genauigkeit 0,03mm - Vertex
Hohe Klemmkraft und nachweisbare Genauigkeit sorgen für sichere Werkstückspannung und reproduzierbare Bearbeitungsergebnisse. Mit einer Klemmkraft von 4500 kgf und einer Genauigkeit von 0.03 bietet das Spannfutter zuverlässige Performance; technische Fragen klärt Metav gern per eMail oder Telefon. Spannfutter VSC-16 mit 3 Backen Das Spannfutter VSC-16 mit 3 Backen eignet sich für präzise Werkstückspannung bei mittleren Drehzahlen und größeren Spanndurchmessern Spannfutter »VSC-16« von Vertex Klemmkraft 4500 kgf für sichere Fixierung Bis 1500 r.p.m. für mittlere Bearbeitungen Durchmesser 405 für größere Werkstücke Genauigkeit 0.03 für gleichbleibende Toleranzen Hohe Klemmkraft für sichere Werkstückhaltung Dank der Klemmkraft von 4500 kgf bietet dieses Spannfutter eine deutlich erhöhte Haltekraft, die Vibrationen reduziert und den Werkzeugverschleiß senkt. Anwender profitieren von stabiler Bearbeitung, weil das Werkstück während des Zerspanens zuverlässig fixiert bleibt. Die reduzierte Bewegung ermöglicht präzisere Schnitte und gleichbleibende Oberflächenqualität. Präzision und Wiederholgenauigkeit für Serienfertigung Eine Genauigkeit von 0.03 minimiert Rundlaufabweichungen und unterstützt die Einhaltung enger Toleranzen bei Folgeprozessen. In Fertigungsumgebungen sorgt die konstante Präzision für weniger Nacharbeit und höhere Ausschussquote-Senkung, insbesondere bei wiederkehrenden Losgrößen. Technische Teams schätzen das planbare Verhalten bei Mess- und Montageprozessen. Passend für größere Werkstücke und mittlere Drehzahlen Der Durchmesser 405 erweitert den Einsatzbereich gegenüber kleineren Spannfuttern und ermöglicht die Bearbeitung voluminöser Werkstücke. In Kombination mit der maximalen Geschwindigkeit von 1500 r.p.m. eignet sich das System für eine Bandbreite an Zerspanungsaufgaben, bei denen Stabilität und kontrollierte Drehzahlen im Vordergrund stehen. Die drei Backen erleichtern das zentrieren und spannen runder Werkstücke. Einsatzempfehlung und Zielgruppe Hersteller, Lohnfertiger und ambitionierte Werkstätten finden in diesem Spannfutter eine robuste Lösung für drehmaschinelle Anwendungen, die Wert auf Wiederholgenauigkeit legen. Die kompakte Bauart erleichtert Integration und Austausch, während die technischen Kennwerte auf industrielle Anforderungen abgestimmt sind. Bei Unklarheiten bietet Metav fachliche Beratung und schnellen Versand aus Emmerich. Empfehlung: Für zuverlässige Werkstückspannung die Auswahl des Spannfutters VSC-16 empfehlen und technische Beratung sowie Bestellung direkt über Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: VSC-16 Marke: Vertex Bezeichnung: Spannfutter mit 3 Backen ECLASS: 21020590 Fakten Klemmkraft: 4500 kgf Geschwindigkeit: 1500 r.p.m. Durchmesser: 405 Genauigkeit: 0.03 Besonderheiten mit 3 Backen r.p.m.: Umdrehungen pro Minute kgf: Kilogrammkraft als Kraftangabe FAQ Welche Klemmkraft bietet das Spannfutter VSC-16 und warum ist das wichtig? Das Spannfutter VSC-16 von Vertex verfügt über eine Klemmkraft von 4500 kgf, wodurch Werkstücke sicher fixiert werden und Vibrationen reduziert bleiben; dies erhöht die Werkzeugstandzeit und verbessert die Oberflächenqualität. Für welche Drehzahlen ist das Spannfutter VSC-16 geeignet? Das Spannfutter VSC-16 ist für Geschwindigkeiten bis 1500 r.p.m. ausgelegt und eignet sich damit für mittel-stufige Zerspanungsaufgaben, bei denen Balance zwischen Drehzahl und Stabilität gefragt ist. Wie beeinflusst die Genauigkeit 0.03 die Bearbeitung? Die Genauigkeit 0.03 des Vertex Spannfutters VSC-16 reduziert Rundlaufabweichungen und unterstützt die Einhaltung enger Toleranzen, was insbesondere bei Serienfertigung und Montagevorgängen relevant ist. Ist das Spannfutter VSC-16 für größere Werkstücke geeignet? Ja, mit einem Durchmesser von 405 ist das Spannfutter VSC-16 für größere Spannbereiche ausgelegt und erlaubt die Bearbeitung voluminöser Werkstücke auf Drehmaschinen. Worauf sollte bei der Integration des Spannfutters VSC-16 in bestehende Maschinen geachtet werden? Bei der Integration des Spannfutters VSC-16 ist auf passende Aufnahmen und die Kompatibilität mit Maschine und Spannsystem zu achten; bei Bedarf liefert Metav technische Unterstützung und prüft Kompatibilitäten. Hersteller: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
406mm Indexing Rotary Table Three-Point Clamping 65mm Bore, 4°/Rev, 10" Readout, T-Slots 6x16mm - Vertex
Take advantage of precision indexing, robust load capacity and secure fixturing to keep production repeatable and efficient. The combination of a 406 mm working diameter and a reliable 4° indexing increment supports accurate multi-face machining while robust construction ensures vibration resistance. Order the rotary table directly via Metav Werkzeuge or contact our consultants for specification support. HVD-400 Round indexing rotary table — 406 mm diameter, 4° indexing (Vertex) The HVD-400 is a compact round dividing table designed for precision machining and fixture applications where repeatable angular indexing and secure clamping are required 406 mm working diameter 4° indexing per spindle revolution T-slots 6 x 16 mm for secure fixturing Max load 140 kg horizontal, 70 kg vertical Accurate indexing for reproducible multi-face machining The rotary table delivers precise angular positioning through its 4° indexing per spindle revolution combined with a fine 10″ vernier reading, enabling repeatable setups for series work. Indexing here means that the table rotates in defined angular increments, so complex operations such as evenly spaced hole patterns or staged toolpaths are executed with consistent accuracy. The clear graduated scale reduces setup time and the risk of cumulative error, making the component flow more reliable and lowering scrap rates in medium-volume production. Robust construction that stabilises heavier workpieces A solid platform with a 406 mm diameter and a mass of approximately 122 kg provides a stable base for machining. The heavy build dampens vibration, which improves surface finish and cutter life during milling or peripheral grinding. Practical features such as T-slots 6 x 16 mm and a 65 mm mounting bore allow flexible clamping and compatibility with common fixtures, while rated capacities of 140 kg horizontal and 70 kg vertical define safe working limits for different orientations. These characteristics support confident workholding of bulky or asymmetrical parts with reduced re‑fixtures. Versatile integration for workshop and production cells Designed for use as a dividing table in milling, drilling and custom fixture setups, this rotary indexing table enhances workflow when incorporated into automated or manual stations. As a compact rotary indexing table, it suits toolrooms and small batch production where space is at a premium but precision is essential. Clear mechanical indexing and standardised mounting dimensions make retrofitting straightforward; end users benefit from reduced engineering time and faster changeovers. The construction and feature set are aligned with common clamping technology standards, simplifying the selection of accessories and reducing procurement complexity. Contact Metav Werkzeuge today to discuss the Vertex HVD-400 rotary indexing table for your machining application, or request detailed mounting and fixturing advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: HVD-400 GTIN: 4061905084959 eClass: 36600610 Diameter: 406 mm Height: 130 mm Mass: 122 kg Max load horizontal: 140 kg Max load vertical: 70 kg Core data Indexing increment: 4° per spindle revolution Reading resolution: 10″ vernier Mounting bore / clamping: 65 mm T-slots: 6 x 16 mm Manufacturer: Vertex Special features Round dividing/rotary table design Designed for fixture and indexing tasks Suitable for milling and drilling applications Robust construction for vibration damping FAQ What level of angular accuracy does the unit provide? The HVD-400 dividing table offers a 4° indexing increment with a 10″ vernier reading, enabling fine manual positioning and consistent repeatability for indexed operations. Which materials and workpiece sizes can be clamped reliably? With a 406 mm diameter, T-slots 6 x 16 mm and rated loads of 140 kg horizontal and 70 kg vertical, the table suits medium-sized workpieces across common machining materials where secure fixturing is required. How is the table mounted to a machine or fixture plate? Mounting uses the 65 mm bore and T-slot pattern for direct clamping or adapter plates; the dimensions follow standard workshop fixture practice for straightforward integration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
406mm Rotary Indexing Table Horizontal/Vertical, Three-Point Clamping, 6x16mm T-Slots, 140kg/70kg Capacity - Vertex
Take advantage of the combination of predictable indexing, high load capacity and a compact, stable build for reliable fixture work and repeatable machining results. Order the rotary dividing table directly via Metav Werkzeuge or consult the team for application advice. HV-16 Rotary Dividing Table — 406 mm diameter, Horizontal/Vertical, Vertex The HV-16 is a precision rotary dividing table designed for horizontal and vertical fixture work, offering reliable indexing and a compact footprint for machine-shop use. 406 mm working diameter MT‑4 spindle mounting 4° per spindle revolution T-slots 6×16 mm for secure clamping Max load 140 kg horizontal Precise indexing that speeds up set-up and machining The HV‑16 delivers predictable angular steps thanks to a spindle rotation that corresponds to 4° per turn and a fine reading of 10", giving a balance between coarse indexing and fine positioning. Such a configuration supports efficient multi-position machining and simpler set-up routines, reducing fixture change time. Where repeatability matters, the defined increment per spindle revolution helps plan operations and calculate cycle steps without the need for complex conversions. Secure workholding and versatile orientation for diverse parts A working diameter of 406 mm combined with T‑slots 6×16 mm allows robust clamping options and straightforward fixturing of irregular components. The unit’s MT‑4 spindle mounting provides compatibility with standard tooling arbors and mandrels, while the specified maximum loads — 140 kg horizontal and 70 kg vertical — define safe working limits for heavy or off‑centre parts. These characteristics enable secure machining in both horizontal and vertical setups, supporting a wide range of shop tasks from indexing to light rotary milling. Compact mass and dimensions for stability on the machine table With overall dimensions of 500 × 435 × 128 mm and a substantial mass of 106.4 kg, the device offers damping properties that minimise chatter and enhance surface finish during cuts. The lower profile and 130 mm height keep the centre of gravity manageable for most milling machines and drill presses, while the footprint is compatible with common machine tables. The compact construction thus supports stable machining without consuming excessive table space, making it suitable for workshops that value both performance and efficient use of floor area. Practical applications and integration into production Designed for clamping technology and rotary positioning tasks, the dividing unit is suitable for indexing, drilling patterns, light milling and component inspection where defined angular steps are required. The HV‑16 integrates into standard workshop workflows and pairs with conventional fixturing accessories via its T‑slots and MT‑4 arbor. For operations requiring repeated angular positions and dependable load support, this compact rotary table offers a pragmatic solution that simplifies process planning and reduces rework. Contact Metav Werkzeuge for tailored advice on integrating the Vertex HV-16 rotary dividing table into production and to assess fixturing options from our Emmerich distribution centre Technical Data SKU: HV-16 GTIN: 4061905091452 Data Diameter: 406 mm Overall dimensions: 500 × 435 × 128 mm Height: 130 mm Weight: 106.4 kg Special features Spindle mounting: MT‑4 Spindle rotation per revolution: 4° Reading resolution: 10" T‑slots: 6×16 mm Max load horizontal: 140 Kg Max load vertical: 70 Kg eCl@ss: 36600610 FAQ What degree increment does the table provide per spindle turn? The table provides 4° per spindle revolution, which allows straightforward calculation of angular positions for indexing tasks with the HV‑16 rotary dividing table. Which mounting and fixturing options are supported? The HV‑16 is fitted with an MT‑4 spindle mount and T‑slots 6×16 mm, enabling standard arbors and multiple clamping arrangements for secure workholding. What loads can be machined in horizontal and vertical positions? Rated maximum loads are 140 kg horizontal and 70 kg vertical, giving clear limits for safe fixturing and machining with the HV‑16. Is the unit suitable for small milling machines with limited table space? Yes. The compact footprint (500 × 435 × 128 mm) and substantial mass (106.4 kg) make the rotary unit stable yet compatible with typical milling machine tables used in production and toolrooms. Which applications benefit most from this rotary dividing table? Typical uses include indexing, pattern drilling and light rotary milling where defined angular steps and robust clamping are required; the HV‑16 is designed to streamline such tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
40mm Centre Point MK5 With Live Centre Features: Max Workpiece 2000kg, Runout 0.005mm, Max Speed 2100 min⁻¹, 60° Tip Angle - TECWERK
Take advantage of the combination of high load capacity, tight runout tolerance, and robust MK5 mounting for reliable turning operations; order directly via Metav Werkzeuge or consult the team for application advice. Zentrierspitze MK5 mitlaufend · Live centre with 60° tip · TECWERK The Zentrierspitze MK5 mitlaufend is a rotating live centre designed for heavy-duty lathes and machining centres where secure support and consistent concentricity matter. MK5 Morse taper shank 60° precision tip Suitable for up to 2,000 kg workpieces Runout max 0.005 mm Max. speed 2,100 rpm Consistent concentricity for demanding turning tasks This rotating centre provides reliable support under significant loads, with a specified capacity for workpieces up to 2,000 kg and a runout max. 0.005 mm that helps maintain concentricity during turning. The tight runout value reduces rework and scrap by ensuring that cuts remain predictable and within tolerance; for shops producing components to strict dimensional standards, this translates into fewer rejects and shorter inspection cycles. The 60° tip angle gives a stable contact geometry that distributes clamping forces and reduces local deformation on softer workpiece materials. Quick fitting and secure taper connection Equipped with an MK5 Morse taper, the centre accepts standard MT5 sockets for straightforward fitting into tailstocks and machine spindles. The Morse taper system provides a self-locking, rigid connection that minimises axial play and eases repeatable mounting. For users unfamiliar with taper nomenclature: Morse taper (MT) indicates the tapered shank size and interface, ensuring compatibility with machines specified for MT5 tooling. This reduces setup time and simplifies tool inventory management in mixed-machine workshops. Designed for sustained rotation and operational stability The rotating assembly is specified for a max. speed of 2,100 rpm, balancing rotational performance with bearing longevity. A robust housing with a 90 mm diameter and a 50 mm tip length support the rotating element while dissipating forces generated during machining. At a mass of 4.7 kg, the unit is substantial enough to resist vibration yet compact for a wide range of lathes. These mechanical choices aim to deliver smooth rotation and reliable contact, which in turn reduces chatter and improves surface finish. Practical benefits for the production floor As a rotating centre, the device simplifies operations where the workpiece requires free rotation while being supported, for example during long turning cycles or when balancing is critical. The combination of a precise tip geometry, low runout and stable taper connection translates into shorter cycle times and more consistent parts per shift. For teams seeking predictable machine performance and lower downstream correction work, this live centre represents a pragmatic investment in process reliability. Technical questions regarding machine compatibility or specific applications can be clarified with Metav Werkzeuge's specialists. For tailored advice on integrating the TECWERK live centre into existing turning processes, contact Metav Werkzeuge – the specialists in supplying precision tooling and workshop solutions. Technical data Article number: 2000832043NW Manufacturer: TECWERK Product type: Live centre (rotating centre) Facts Weight: 4.7 kg Diameter (tip): 40 mm Projection (ausladung): 129 mm Tip length: 50 mm Housing diameter: 90 mm Shaft diameter: 44.399 mm Tip angle: 60° Max. workpiece weight: 2,000 kg Runout max.: 0.005 mm Max. speed: 2,100 rpm Taper: MK5 Package unit: 1 Special features MK5 Morse taper shank Rotating/live centre design Precision 60° contact geometry Robust housing for stable operation FAQ What maximum workpiece weight can this rotating centre support? The rotating centre is specified to support workpieces up to 2,000 kg, making it suitable for heavy turning operations where stable axial support is required. Which taper does the device use for mounting? The unit uses an MK5 (Morse taper 5) shank, ensuring secure, repeatable fitting in machines and tailstocks designed for MT5 tooling. How precise is the concentricity of the tip during rotation? The design specifies a runout max. 0.005 mm, which supports high-precision turning and reduces the need for secondary correction. Is the rotating centre suitable for high-speed turning? The component is rated to a maximum rotational speed of 2,100 rpm, balancing performance and bearing life for typical lathe applications. What does the 60° tip angle mean for machining results? A 60° tip angle provides a stable contact point that spreads clamping forces and helps maintain concentric support, which benefits surface finish and dimensional stability during turning. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Clamping Tool Kit M14 x 16 40-Piece, Universal Clamping Accessories - AMF
Robust clamping performance combined with a comprehensive component kit speeds fixture set-up and reduces changeover time; the M14 x 16 compatibility and the 40-piece assortment ensure secure, repeatable clamping. Order the set directly via Metav Werkzeuge or request consultant support for fixture planning. AMF Clamping Tool Set Nr. 6532 (M14 x 16) — 40-piece The AMF Clamping Tool Set Nr. 6532 is a complete clamping solution for T‑slot fixture systems, supplying essential screws, pads and jaws for secure workpiece holding in machining and assembly. 40-piece complete clamping set M14 x 16 T-slot compatibility Includes universal clamping pads Gr. 2 & 3 DIN-spec hex nuts and washers included Faster fixture set-up and less downtime The 40-piece kit is organised to accelerate fixture assembly: the combination of M14 x 16 T-slot screws, assorted lengths and clamping jaws enables quicker positioning and fewer tool changes. Using standardised T‑slot hardware reduces time spent selecting parts and lowers the risk of mismatched components, which translates into a measurable increase in throughput. The practical assortment promotes modular clamping layouts, so fixture changes become a predictable, repeatable process rather than an interruption to production. Components engineered for consistent clamping force Key metal parts conform to established standards and contribute to reliable clamp behaviour. The kit contains hex nuts M14 (DIN 6330 B) and washers M14 (DIN 6340) that ensure even load distribution and corrosion-resistant contact surfaces where applicable. DIN-spec fasteners simplify procurement and maintenance, and the standardisation supports consistent torque application across clamping points. Stable clamping force improves machining accuracy and reduces rework cycles. Adaptable scope for varied workshop tasks The assortment includes universal clamping pads in two sizes and clamping bars of different lengths, providing flexibility for diverse workpiece geometries. With clamping jaws 14 x 100 mm and 14 x 160 mm, plus a mix of T-slot screw lengths (63, 100 and 160 mm), the set supports both small fixtures and larger setups. This adaptable scope reduces the need for multiple specialised kits and helps streamline storage and inventory management in the tooling cupboard. Clear parts breakdown for easy planning and replenishment The set’s documented content allows quick assessment of remaining life and replacement needs: stud screws, extension nuts and standard fasteners are listed to enable straightforward reorders of the exact items required. The organised composition supports purchasing consolidation and long-term workshop reliability, while the robust selection of components helps maintain fixture integrity over repeated cycles, contributing to predictable machining outcomes. Discuss fixture layout and part selection with Metav Werkzeuge to optimise use of the AMF 40-piece clamping kit; contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833101NW Item designation: Clamping tool set Nr. 6532 Manufacturer: AMF Packaging unit: 1 Facts T-slot size: M14 x 16 Content: 40 pieces Packaging unit: 1 Special features 4 × universal clamping pad, size 2 4 × universal clamping pad, size 3 2 × clamping jaw 14 × 100 mm 2 × clamping jaw 14 × 160 mm 2 × T-slot screw 63 mm 4 × T-slot screw 100 mm 4 × T-slot screw 160 mm 2 × stud screw 100 mm 2 × stud screw 160 mm 6 × hex nut M14 DIN 6330 B 6 × washer M14 DIN 6340 2 × extension nut M14 FAQ What is included in the clamping kit? The AMF Clamping Tool Set Nr. 6532 contains a 40-piece assortment of pads, jaws, T-slot screws, stud screws, hex nuts and washers as listed in the special features; SKU 4000833101NW identifies the exact composition. Which T-slot size does the set support? The kit is configured for M14 x 16 T-slot systems and includes matching T-slot screws in several lengths to accommodate different slot depths and fixture profiles. Are standardised fasteners included for consistent torqueing? Yes, the set includes hex nuts M14 (DIN 6330 B) and washers M14 (DIN 6340) to support uniform torque application and repeatable clamping results. What jaw lengths are provided for larger workpieces? Two clamping jaw lengths are supplied: 14 × 100 mm and 14 × 160 mm, allowing accommodation of both compact and extended clamp configurations. Is the assortment suitable for modular fixture design? The range of pads, jaws and screw lengths in the kit supports modular clamping layouts and flexible fixture planning for varied machining operations. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Closure Clamp Horizontal Foot With Metal Handle, Hook, 2,000N Thrust / 2,500N Hold - Kukamet
Taking advantage of stainless steel construction and a 2,500 N holding force, this toggle latch clamp delivers secure, corrosion-resistant fastening with a compact footprint and a horizontal mounting base. The robust metal handle and integrated hook enable reliable repetitive clamping in production and jigging. Order the toggle latch clamp 361 directly via Metav Werkzeuge or ask our consultants if needed. Toggle latch clamp 361 — stainless-steel latch with hook, 2,500 N holding force (Kukamet) A Toggle latch clamp 361 for secure fastening in assembly, fixtures and transport applications, featuring a horizontal base for stable mounting and a durable metal handle Corrosion-resistant stainless steel construction Horizontal base for stable mounting Metal handle for long service life Holding force up to 2,500 N Consistent, measurable clamping for production use The clamp provides a repeatable clamping action that supports efficient handling in serial production. With a clamping force of 2,000 N and a holding force of 2,500 N, the device secures parts under load and reduces rework caused by shifting components. The compact design and the horizontal base enable simple integration into jigs and fixtures, while the hook ensures positive engagement. Technical values are deliberately stated to support decisions based on performance rather than opinion. Built to withstand workshop conditions and reduce downtime Made from stainless steel, the latch resists corrosion in damp or chemically exposed environments, extending service intervals and lowering life-cycle costs. The metal handle is engineered for repeated actuation and tactile feedback, so operators benefit from a smooth, confident locking movement. Where durability matters, the material choice reduces the need for frequent replacement and preserves alignment in long-term fixtures. Easy to fit and adjust within existing assemblies The unit includes a 40 mm thread length for secure fastening and flexible positioning when mounting to benches or subframes. The compact mass of 0.25 kg keeps added weight to a minimum on moving fixtures. As a toggle-style latch with an integrated hook, it simplifies clamping loops and reduces the number of components needed in a fixture layout. Clear numerical data enables planners to match the latch to load requirements and mounting constraints. For robust fastening in production environments, request the Kukamet toggle latch clamp 361 via Metav Werkzeuge for a reliable combination of corrosion resistance and high holding force — Metav Werkzeuge can advise on suitability for specific fixtures and supply from stock Technical data Article number: S361-3 GTIN: 8682843523377 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.25 kg Clamping force (max): 2,000 N Holding force (max): 2,500 N Thread length: 40 mm Special features Material: stainless steel Mounting: horizontal base Handle: metal Feature: integrated hook Category: clamp / toggle latch FAQ How much holding force does the clamp provide? The Kukamet toggle latch clamp 361 delivers a holding force of up to 2,500 N, with a maximum clamping (pressing) force of 2,000 N. Is the latch suitable for corrosive or moist environments? Yes; the clamp is manufactured from stainless steel, which provides corrosion resistance suitable for damp workshop conditions. Can the latch be mounted to existing jigs and fixtures? The latch features a horizontal base and a 40 mm thread length, allowing straightforward mounting into existing fixture plates and subframes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Closure Plug Z2 Form A20 D83, DIN 69880 VDI40 - TECWERK
Take advantage of precise fit and reliable protection with the combination of Form Z2 geometry and VDI40 compatibility for reduced downtime and cleaner toolholders. Order the sealing plug directly via Metav Werkzeuge or consult the Metav specialists for suitability checks. Sealing plug Z2 (DIN 69880) for VDI40 toolholders — TECWERK The Sealing plug Z2 DIN 69880 VDI40 TECWERK is a closure component for VDI40 toolholders, designed to protect internal bores and interfaces during storage, transport and maintenance. VDI40 standard compatibility Form Z2 geometry for precise fit d1 40 mm nominal bore Protects toolholder internals Prevents contamination and reduces maintenance intervals The primary purpose of this sealing component is to prevent contamination of the toolholder interior and interfaces, thereby reducing the risk of corrosion and particle ingress. By closing off the spindle-side bore with a precisely formed plug, routine cleaning cycles become less frequent and unscheduled maintenance is lower. The combination of standard conformity and defined dimensions ensures predictable performance in workshop workflows, delivering measurable time savings and improved uptime for production-critical tooling systems. Ensures reliable fit across VDI40 systems Compatibility with the VDI40 interface and compliance with DIN 69880 allow secure placement in standardised toolholders. The Form Z2 profile provides a tight seating geometry while the nominal bore d1: 40 mm and outer diameter D: 83 mm ensure the part aligns with common VDI40 receptacles. This technical conformity simplifies inventory management: one recognised component type can serve multiple holders. Clear dimensional data supports quick verification during goods receipt and fit checks on the shop floor, reducing assembly time and minimising installation errors. Simplifies storage and handling while protecting investment As a simple yet effective accessory, the plug offers a practical way to protect cutting tools and holders during storage and transport. Using standardised closure components helps maintain toolholder surfaces and sealing faces, which preserves concentricity and prolongs the service life of precision interfaces. For operations seeking consistent handling procedures, these plugs enable orderly storage routines and quicker setup at changeovers. The product’s measured design supports both experienced technicians and those newer to toolroom practice, delivering confidence in handling and preservation. For compatibility verification or to arrange supply of the TECWERK VDI40 sealing plug, contact Metav Werkzeuge in Emmerich for tailored advice and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000833697NW Label: Verschlussstopfen Z2 DIN 69880 VDI40 STA TECWERK Manufacturer: TECWERK Product type: Sealing plug Packaging unit: 1 UID: 2000833697NW Dimensions & core data d1: 40 mm A: 20 mm D: 83 mm Form: Z2 Standard: DIN 69880 / VDI40 Special features Form Z2 geometry VDI40 interface compatibility Designed for closure and protection of toolholder bores Suitable for storage and transport protection FAQ What does Form Z2 indicate for this sealing plug? Form Z2 describes the plug’s seating geometry and contour; it is the specified profile that ensures a secure, repeatable fit in compatible VDI40 receptacles. Is the plug compatible with all VDI40 toolholders? Compatibility is intended for VDI40 interfaces that conform to DIN 69880 dimensions; verification against the specific holder drawing is recommended because variations in holder design can exist. What are the main dimensions to check before fitting? Key dimensions are the bore diameter d1: 40 mm, the axial length A: 20 mm and the outer diameter D: 83 mm; these determine seating depth and clearance. Is the material of the sealing plug specified? The product listing does not specify the material; material information is not provided in the available product data. Can the plug be used during machining operations? This plug is designed for protection during storage, transport and handling; it is not intended as a component for use during active cutting or high-speed machining. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Combidrive Milling Arbor With 22mm Clamping Diameter, DIN 69871 AD/B - TECWERK
Benefit from the combination of a precise DIN 69871 taper, a clamping diameter of 22 mm and a case‑hardened, ground finish for consistently rigid and repeatable milling set‑ups. Order the TECWERK combination milling arbor directly via Metav Werkzeuge or consult our specialists for application guidance. Combination milling arbor DIN 69871 AD/B, SK40, clamping Ø 22 mm — TECWERK The Combination milling arbor is a SK40 toolholder designed to receive milling cutters with longitudinal or transverse keyways for secure, high‑precision machining in production and toolroom environments Steep taper DIN 69871 form AD/B Case‑hardened and ground finish Clamping diameter 22 mm for secure fit Consistent accuracy and reduced setup time for milling operations The taper connection to DIN 69871 and the SK40 shank ensure a rigid interface that minimises run‑out and maintains tool alignment during cutting. A precise taper seat concentrates clamping forces and reduces vibration, which in turn enhances tool life and process stability. The arbor’s geometry, including the 40 mm shank diameter, delivers a reliable transmission of torque; this reduces the need for repeated adjustments and shortens machine downtime, supporting efficient production workflows. Secure mounting for cutters with longitudinal or transverse keyways Designed specifically for the reception of milling cutters with longitudinal or transverse keyways, the arbor features a clamping diameter of 22 mm that provides a positive, backlash‑free fit. This configuration converts axial and tangential forces into the tool body reliably, avoiding slippage under load. For users less familiar with keyway‑mounted cutters, the principle is simple: the key engages the cutter slot so that rotational forces are taken by the key and the clamping system, improving repeatability and enabling consistent surface finishes. Durable finish and compact dimensions for workshop robustness The arbor is case‑hardened and ground, a combination that increases surface hardness where it matters while preserving accurate dimensions and a smooth mating surface. The hardened outer layer resists wear from repeated mounting cycles; the ground finish maintains the seating geometry for long‑term precision. With an overall A dimension of 55 mm and a face length of 19 mm, the component is compact yet sufficiently robust for routine milling tasks, offering a practical balance between accessibility to cutters and mechanical stability. Contact Metav Werkzeuge for tailored guidance on integrating the TECWERK combination milling arbor into existing SK40 setups and to confirm suitability for specific cutter types and operations Technical data Article number: 2000833797NW Product: Combination milling arbor (Kombiaufsteckfräsdorn) Brand: TECWERK Facts Shank diameter D: 40 mm Clamping Ø d: 22 mm A: 55 mm L: 19 mm Standard: DIN 69871 form AD/B Special features Steep taper DIN 69871 form AD/B Accepts milling cutters with longitudinal or transverse keyway Case‑hardened and ground SK40 toolholder interface FAQ Which spindles is this arbor compatible with? The TECWERK combination milling arbor is designed for SK40 interfaces and conforms to DIN 69871 form AD/B, making it suitable for machines and spindle systems that accept that taper standard. Can it be used with cutters that have a transverse keyway? Yes, the arbor accepts milling cutters with either longitudinal or transverse keyways, so cutters secured by a key are fully supported by the clamping arrangement. What are the key dimensional values to check before ordering? Important dimensions are the shank diameter (40 mm), the clamping diameter (22 mm), A = 55 mm and L = 19 mm; these values determine fit and suitability for a given tool and machine configuration. How does the case‑hardening and ground finish affect performance? The case‑hardened and ground surface increases wear resistance at the seating area while preserving the precise geometry required for accurate taper engagement and long‑term repeatability. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
40mm Drive Ring For 22mm Arbour, For Slot-Coupled Milling Cutters, DIN 6366 - TECWERK
Robust DIN 6366 compliance and precise fit for mounted cutters with a transverse groove ensure reliable torque transmission; with clear dimensional data (d 22 mm, D 40 mm, a 12 mm, b 10 mm, h 5.6 mm), the drive ring supports consistent machining accuracy and simple stock management — order directly via Metav Werkzeuge or contact our advisors for matching arbors and spare parts. TECWERK Drive Ring for Ø22 mm Arbor (DIN 6366) – Positive-drive coupling The TECWERK Drive Ring is a DIN 6366-compliant coupling ring designed to transfer torque from mounted cutters with a transverse groove to matching arbors, offering standardised compatibility for toolrooms and production workshops. DIN 6366 compliance Fits Ø22 mm bore, D 40 mm outer diameter For cutters with transverse groove Precise positive-drive engagement Secure torque transmission for consistent machining results A standardised drive ring that meets DIN 6366 provides a defined mechanical interface between cutter and arbor, reducing slippage and wear. The ring engages the cutter's transverse groove to create a positive drive, which converts spindle torque directly into cutter rotation. This technical design mitigates micro-movements under load, enhancing concentricity and therefore the overall machining accuracy of mounted milling operations. Clear compatibility data to simplify tool management Marked dimensions such as d 22 mm (bore) and D 40 mm (outer diameter), together with the specified a 12 mm, b 10 mm and h 5.6 mm, allow quick verification when matching the component to existing arbors and cutters. Using standardised coupling parts reduces inventory complexity and downtime: maintenance teams and purchasing agents can identify replacements unambiguously and keep production running with minimal interruption. Practical benefits on the shop floor and in the supply chain The coupling ring’s straightforward function supports fast replacement and reliable repeatability during cutter changes, which is especially valuable in high-mix or short-run production. By ensuring secure mechanical engagement, the component contributes to predictable tool performance and fewer rejects. Suitable for workshop environments and tool distributors, the part supports operational continuity without requiring additional calibration or special fixtures. For standardised, reliable clamping of mounted cutters, source the TECWERK drive ring through Metav Werkzeuge — contact Metav Werkzeuge for advice, availability and compatible arbors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000834087NW Label: Drive ring for arbor Ø22 mm (TECWERK) Product type: Drive ring Brand: TECWERK Packing unit: 1 Dimensions Bore (d): 22 mm Outer diameter (D): 40 mm a: 12 mm b: 10 mm h: 5.6 mm Applications / Special features Complies with DIN 6366 For mounted cutters with transverse groove Suitable for use with mounted cutter arbors Positive-drive coupling for reliable torque transfer FAQ What standard does this drive ring conform to? The drive ring conforms to DIN 6366, ensuring a standard interface for mounted cutters with a transverse groove. Which bore and outer diameter are specified for this ring? The component is specified with a bore of 22 mm and an outer diameter of 40 mm (SKU 2000834087NW). Can this ring be used with any mounted cutter? This ring is suitable for mounted cutters that feature a transverse groove and match the listed dimensions; compatibility depends on cutter groove geometry and arbor design. How does the coupling ring improve machining accuracy? By providing a positive drive engagement, the ring reduces slippage and maintains concentricity, which supports consistent cutting conditions and improved surface quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm ER 32 Collet 7mm Clamping Diameter, DIN 6499-B Accuracy 5 µm - TECWERK
Take advantage of precise clamping and proven runout stability to keep production predictable; the combination of 5 µm repeatability and a compact 7 mm clamping diameter supports consistent tool life and uptime. Order the part via Metav Werkzeuge or consult their specialists for application-specific advice. ER 32/470 E collet – 7 mm clamping diameter, 5 µm runout (TECWERK) A robust ER 32/470 E collet designed for accurate tool clamping in ER32 collet chucks across machining and workshop applications. High runout accuracy 5 µm Compatible with ER32 collet chucks Full-length clamping including lead chamfer Clamping bridging nominal −1.0 mm Precision clamping for predictable machining results The collet is manufactured to meet standardised form and fit criteria, delivering 5 µm roundness and repeatability that translate directly into tighter tolerances and reduced scrap rates. With a defined 7 mm clamping diameter, the component offers a stable grip on cylindrical tooling, which is essential for repeatable drilling and milling operations. The adherence to recognised dimensional norms ensures the clamping element is compatible with established ER32 systems, allowing it to be integrated without adaptation into existing setups and supporting efficient production planning. Secure hold over the full clamping length reduces setup risk Because the design allows the tool to be held along the full clamping length, the clamping force is distributed evenly and tool whirling is minimised. The ability to engage the workpiece or tool on the lead chamfer increases seating reliability for slightly tapered or chamfered shanks. The specified clamping bridging: nominal −1.0 mm explains how the collet compensates for small diameter deviations while maintaining grip, so changeovers and in-process variations are better managed and the need for intermediate sizes is largely removed. Standard conformity and simple integration speed production Produced in accordance with DIN 6499‑B, the collet fits conventional ER32 chucks without further adjustment, reducing setup time and the risk of assembly errors. The compact dimensions support tight tool stacks and smaller work envelopes while maintaining performance: consistent holding across runs helps to optimise tool life and machine throughput. The clear technical specification and compatibility make the collet a pragmatic choice for workshops and production environments seeking reliable clamping without complex retrofit work. Choose TECWERK's ER 32/470 E collet for stable, repeatable clamping and contact Metav Werkzeuge for procurement and technical guidance: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 2000832943NW Manufacturer: TECWERK Product type: ER 32 Description: ER collet ER 32/470 E, clamping dia. 7 mm, TECWERK Packaging unit: 1 Facts Clamping diameter: 7 mm Runout / repeatability: 5 µm Length L: 40 mm Small diameter d: 7 mm Large diameter D: 33 mm Clamping bridging: nominal −1.0 mm Special features Conforms to DIN 6499‑B Suited to ER collet chucks (type ER) Full-length clamping, also on lead chamfer No intermediate sizes required Roundness and repeatability: 5 µm FAQ What clamping diameter does the collet accept? The ER 32/470 E collet from TECWERK clamps a 7 mm diameter and allows a clamping bridging of nominal −1.0 mm for small diameter deviations. Is this collet compatible with ER32 chucks? Yes; the collet is designed for ER32 collet chucks and manufactured to the DIN 6499‑B specification to ensure interchangeability. What level of runout can be expected? The ER 32/470 E provides roundness and repeatability of approximately 5 µm, supporting high-precision machining tasks. What are the main dimensions of the collet? Key dimensions are L: 40 mm, d: 7 mm, D: 33 mm; the SKU is 2000832943NW for order and reference purposes. How is the item supplied? The collet is supplied singly; the packaging unit indicated is 1 for the listed article. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com