Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
40mm ER 32 Collet Clamping Diameter 5mm, Nominal Minus 1.0mm Runout 5 µm - TECWERK
Precise tool retention with a 5 mm clamping diameter and 5 µm runout delivers consistent machining and reduced rework; the full-length holding and DIN 6499-B compatibility make it suitable for standard ER collet systems — order the TECWERK ER 32 collet directly via Metav Werkzeuge or consult our specialists for integration advice Spannzange Typ ER 32/470 E – ER 32 collet, 5 mm clamping diameter, TECWERK Spannzange Typ ER 32/470 E is a precision ER 32 collet designed for secure tool holding in ER collet chucks, suitable for machining tasks that demand repeatable concentricity and simple integration into standard toolholding systems ER 32 system compatibility Accurate runout: 5 µm Full-length tool retention Clamping diameter 5 mm Reliable high-precision clamping for consistent machining The ER 32 collet delivers measurable benefits for production environments: a 5 µm runout and defined clamping diameter ensure components remain within tight tolerances, reducing scrap and rework. Compliance with DIN 6499-B confirms compatibility with standard ER collet chucks, making integration straightforward. Runout (total indicated runout) describes concentricity of the clamped shank; the lower the value, the less radial deviation during rotation, which translates into improved surface finish and longer tool life. This objective performance characteristic supports predictable process control and quality assurance in serial production. Secure retention over the full clamping length improves stability Designed to hold tools along their entire clamping length, this collet enables more stable machining and lower vibration levels, which benefits both surface quality and tool service life. The full-length retention capability means cutting tools and extensions are supported closer to the spindle, reducing bending moments. Dimensional references such as L: 40 mm, d: 5 mm and D: 33 mm describe the collet’s geometry and help plan toolset-up and interference checks. The capacity to clamp on the pilot chamfer increases adaptability for non-standard shank conditions, while the bridging capacity (nominal minus 1.0 mm) allows secure clamping of reduced-diameter shanks without intermediate adaptors. Streamlined workshop logistics and fast changeovers Because intermediate sizes are not required and the collet fits standard ER 32 tooling systems, stockkeeping is simplified and changeover times are reduced. The combination of system compatibility and predictable retention performance supports lean workflows and fewer setup errors. For operations aiming to balance efficiency with precision, the standardised interface and repeatable clamping behaviour enable straightforward tool exchanges and calibration routines. Access to a comprehensive range of matching accessories via a trusted distributor further reduces downtime and helps maintain continuous production. For secure, repeatable clamping with the TECWERK ER 32 collet, contact Metav Werkzeuge GmbH in Emmerich for tailored advice and reliable supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832941NW SKU: 2000832941NW Type: ER 32 Product type: ER collet Item name: Spannzange Typ ER 32/470 E Spann-D.5mm TECWERK Packaging unit: 1 Specifications Clamping diameter: 5 mm Runout / repeatability: 5 µm Length (L): 40 mm Internal diameter (d): 5 mm Outer diameter (D): 33 mm Clamping-bridging capacity: nominal minus 1.0 mm Special features Conforms to DIN 6499-B Fits ER collet chucks (ER 32) No intermediate sizes required Tools retained over full clamping length Can be clamped on the pilot chamfer Brand: TECWERK FAQ Is this collet compatible with standard ER 32 chucks? Yes. The TECWERK ER 32 collet is manufactured to match DIN 6499-B interfaces and is compatible with standard ER 32 collet chucks for straightforward integration. What runout performance can be expected with this collet? The collet offers a runout and repeatability of 5 µm, which supports high-precision machining and consistent concentricity for rotational tooling. Can the collet hold tools with slightly reduced diameters? Yes. The collet provides a bridging capacity of nominal minus 1.0 mm, allowing secure clamping of shanks that are undersized relative to the nominal diameter. What are the main dimensions to consider for tool set-up? Key dimensions: L: 40 mm, d: 5 mm, D: 33 mm—these values assist in fixture planning and ensuring adequate clearance in the toolholder assembly. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Flat Magnetic Gripper Without Threaded Bush Holding Force 125N, Temp Up To 200 °C - TECWERK
Take advantage of a compact, high‑force magnetic clamp that combines hard ferrite construction with a reliable 125 N holding force for small fixtures; order directly via Metav Werkzeuge or consult our specialists for integration advice. Magnetic flat gripper D.40xH8mm without threaded bush — compact hard ferrite clamp, 125 N holding force (TECWERK) Magnetic flat gripper D.40xH8mm without threaded bush for secure, space‑saving clamping in jigs, fixtures and light assembly applications Compact 40 mm diameter design Hard ferrite magnetic material 125 N holding force for secure clamping Withstands up to 200 °C peak temperature Precise clamping in a compact form for small assemblies The 40 mm diameter, low‑profile design delivers stable retention where space is limited. With a 125 N holding force, the component provides measurable clamping power while keeping bulk to a minimum. Built from hard ferrite, the unit is corrosion‑resistant for typical workshop conditions and designed for repeated placement in fixtures. The compact geometry supports accurate positioning and reduces the need for bulky clamps, which in turn can simplify jig design and save bench space. Consistent performance across normal operating temperatures Rated for a recommended operating temperature up to 100 °C and a maximum of 200 °C, the magnet is suitable for many light industrial environments where temperature exposure is intermittent. The temperature guidance helps predict changes in magnetic force over time and allows planners to choose an appropriate mounting strategy for processes involving heat. Clear temperature limits and material data enable a rational selection based on duty cycle rather than guesswork, supporting reliable process planning and fewer production interruptions. Flexible integration into fixtures thanks to a simple, threadless design The version supplied without a threaded bush offers a flush, unobstructed base that can be incorporated into bespoke fixtures or mounted in recessed pockets. The absence of a pre‑fitted thread simplifies customisation for specific applications and reduces the need to adapt standard fastenings. For bespoke assembly needs, secure bonding, countersinking or clamping arrangements can be chosen according to the fixture design; technical advice is available for selecting the most appropriate mounting method. Robust choice for repeated, low‑maintenance use Manufactured for dependable everyday use, the unit is engineered to deliver stable magnetic retention with minimal upkeep. The hard ferrite composition ensures long service life under standard workshop handling, while the clearly stated holding force gives planners a verifiable basis for fixture design. This combination of documented performance and simple mechanics makes the magnet an efficient choice for repetitive clamping tasks in production or repair settings. For compact, reliable magnetic clamping from TECWERK, contact Metav Werkzeuge for procurement support or tailored technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832236NW SKU: 4000832236NW UID: 4000832236NW Dimensions / Performance Diameter: 40 mm Height: 8 mm Holding force: 125 N Recommended operating temperature: up to 100 °C Maximum temperature: 200 °C Packaging unit: 10 Materials / Design Material: hard ferrite Design: without threaded bush Product type: magnetic flat gripper Manufacturer brand: TECWERK FAQ What is the nominal holding force of this magnetic gripper? The magnetic flat gripper provides a holding force of 125 N, suitable for light clamping and fixturing tasks where this retention level is sufficient. Can the gripper be used at elevated temperatures? Yes, the unit has a recommended operating temperature of up to 100 °C and a maximum exposure rating of 200 °C for short periods. How is the gripper mounted without a threaded bush? The threadless base allows recessed or bonded mounting in custom fixtures; the design supports flush installation in jigs for a low overall profile. What material is the magnet made from and what are the benefits? Constructed from hard ferrite, the magnet offers stable magnetic properties, good corrosion resistance and suitability for routine workshop conditions. Is this product suitable for precision assembly jigs? Its compact 40 mm diameter and reliable holding force make it appropriate for many precision jigs where moderate retention and minimal bulk are needed. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
40mm Live Centre MK5 60° Tip 50.5mm Length 88.5mm Housing, 0.005mm Runout 3000 min⁻¹ - RÖHM
Take advantage of precise runout control (≤ 0.005 mm) and a robust Morse taper MT5 mounting for reliable concentric support of heavy rotating workpieces; order directly via Metav Werkzeuge or consult the sales team for technical clarification. Centring centre Pro MK5 RÖHM — high-precision rotating support with 60° tip and MT5 shank A Pro centring centre MK5 designed for lathe applications, providing stable rotation and precise centring for heavy workpieces at workshop speeds High runout ≤ 0.005 mm Supports workpieces up to 2,000 kg Max speed 3,000 rpm Morse taper MT5 shank Consistent concentricity for heavy-duty turning The rotating centre delivers exceptional concentricity, with a specified runout deviation of max. 0.005 mm, which translates into reduced rework and finer surface finishes on turned components. Suitable for demanding production and maintenance tasks, this support is engineered to handle loads up to 2,000 kg, ensuring that large or asymmetrical parts remain stable throughout machining. The combination of low radial runout and sturdy construction minimises vibration and contributes to repeatable part quality. Stable rotation at practical workshop speeds Balanced for everyday shop use, the centre is rated to a maximum speed of 3,000 rpm, providing a compromise between high-speed performance and mechanical longevity. The 60° tip geometry and tip length of 50.5 mm are optimised to locate and support workpieces with minimal contact stress, while the housing diameter of 88.5 mm enhances rigidity. These features work together to reduce thermal and mechanical drift during longer cuts, improving dimensional stability and tool life. Straightforward fitment and reduced setup time Fitted with a precise Morse taper MT5 shank and a shank diameter of 44.399 mm, the centre integrates with standard MT5 spindles for quick installation and interchangeability. A projection of 129 mm gives a practical reach for a wide range of turning tasks without compromising stiffness, and the tip diameter of 40 mm provides a reliable contact area for locating. This compatibility streamlines machine setup and shortens downtime between jobs. Robust build for workshop environments Weighing 4.7 kg, the unit combines mass and balanced construction to dampen chatter and deliver steady performance under load. The Pro design prioritises longevity and ease of maintenance; regular inspection of the rotating elements and lubrication as per workshop practice will extend service intervals. For applications requiring consistent centring under repeated cycles, this rotating centre represents a durable choice that supports productivity and dependable results. For detailed application advice or to secure supply of the RÖHM Pro centring centre MK5, contact Metav Werkzeuge – assistance and ordering are available from the Emmerich location. Technical Data Article number: 4121011510NW Label: Zentrierspitze Pro MK5 mitlfd.RÖHM Type: Pro centring centre Packaging unit: 1 Measurements & Performance Projection: 129 mm Weight: 4.7 kg Tip diameter: 40 mm Shank diameter: 44.399 mm Housing diameter: 88.5 mm Tip length: 50.5 mm Tip angle: 60° Max workpiece weight: 2,000 kg Max speed: 3,000 min⁻¹ Runout deviation: max. 0.005 mm Design & Compatibility Shank: Morse taper MT5 Product name: Zentrierspitze Pro MK5 mitlfd.RÖHM SKU: 4121011510NW FAQ What maximum workpiece weight can the rotating centre support? The centring centre supports workpieces up to 2,000 kg, allowing secure locating of large components during turning operations. Is the shank compatible with standard MT5 spindles? Yes, the unit uses a Morse taper MT5 shank and the shank diameter is specified as 44.399 mm, making it compatible with standard MT5 fittings. What is the permissible runout for precise centring? The specified runout deviation is max. 0.005 mm, ensuring high concentric accuracy for precision turning tasks. At what speeds can the centre be operated safely? The centre is rated for a maximum speed of 3,000 rpm, suitable for many workshop turning applications while maintaining balance and service life. How does the 60° tip benefit machining results? The 60° tip provides a precise contact geometry that improves repeatable locating and reduces contact stress, supporting better surface finish and dimensional accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Magnetic Flat Gripper With Threaded Bush Holding Force 125N, Up To 200°C - TECWERK
Take advantage of a compact, high-temperature-capable magnetic mounting with reliable 125 N holding force and a secure M5 threaded sleeve; order the flat magnetic holder directly via Metav Werkzeuge or consult our specialists for application advice. Flat magnetic holder D40×H18 mm by TECWERK — M5 thread sleeve, 125 N holding force Flat magnetic holder D40×H18 mm is a compact ferrite magnetic base designed for light clamping, positioning and fixturing tasks in workshops and assembly stations. 125 N holding force Hard ferrite construction M5 threaded sleeve Suitable to 200 °C short-term Reliable clamping where consistency matters The compact magnetic base delivers a measured 125 N of holding force, giving a dependable grip for small components and fixtures in routine workshop tasks. Constructed from hard ferrite, the unit maintains magnetic performance under regular industrial use and is specified with a recommended operating temperature up to 100 °C and a maximum of 200 °C for short-term exposure. These clear parameters support process planning and help avoid unexpected failures during thermal cycles. Space-saving design for flexible assembly With a diameter of 40 mm and a height of 18 mm, the magnetic holder fits into confined setups and can be mounted close to tooling or sensors without obstructing access. The integrated M5 thread sleeve permits secure fixing to threaded studs or adaptor plates, enabling repeatable positioning and quick replacement. This small footprint makes the component suitable for modular jigs, test rigs and light-duty fixturing where precision and accessibility are required. Durable choice that reduces handling time The ferrite magnet core and metal sleeve are engineered for straightforward, low-maintenance use: the magnetic base resists demagnetisation in normal workshop conditions and the threaded connection ensures stable mechanical coupling. As a result, assembly cycles benefit from fewer adjustments and reduced handling, supporting efficient throughput. The design emphasises functional reliability rather than decorative finish, making it a pragmatic option for production and repair environments. Contact Metav Werkzeuge for tailored procurement or application advice (info@metav-werkzeuge.com · +49 2822 7131930); our consultants will confirm compatibility and supply options quickly Technical data Article number: 4000832246NW SKU: 4000832246NW Manufacturer: TECWERK Product type: Flat magnetic holder Facts Diameter: 40 mm Height: 18 mm Holding force: 125 N Thread: M5 Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C (short-term) Packing unit: 1 Special features Hard ferrite construction With threaded sleeve Compact design for tight spaces Suitable for light clamping and positioning FAQ What is the maximum holding force of the magnetic holder? The magnetic holder provides a maximum holding force of 125 N, suitable for light fixtures and component positioning. Which thread is integrated in the holder and how is it used? An M5 threaded sleeve is integrated into the unit, enabling secure attachment to threaded studs, adaptor plates or custom fixtures. What materials is the magnetic base made from? The core material is hard ferrite, combined with a metal threaded sleeve to ensure mechanical fixing and magnetic stability. What temperature ranges can the holder withstand? Normal operation is recommended up to 100 °C, with a maximum short-term exposure capability of 200 °C as specified. Is this magnetic holder suitable for heavy-duty machining fixturing? This product is intended for light clamping and positioning tasks; its 125 N holding force is optimised for small components rather than heavy machining loads. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Morse Taper Sleeve For C Toolholder With Ejector Screw, MK4 - TECWERK
Take advantage of a precise, space-saving adapter that combines an MK4 shank and a secure 40 mm seating for quick-change tool holders; the integrated ejector screw speeds up tool swaps while maintaining repeatable concentricity. Order the adapter directly via Metav Werkzeuge or request tailored advice from our consultants. Morse taper sleeve MK4 · 40 mm – TECWERK tool adapter A Morse taper sleeve designed for the steel holder head C, enabling secure mounting of interchangeable tool holders with a 40 mm outer diameter for efficient workshop workflows MK4 shank for standard taper spindles Integrated ejector screw for fast tool release Compatible with interchangeable holders with cylindrical bore Fits steel holder head C Fast, reliable clamping with repeatable concentricity The adapter delivers a compact solution for converting an MK4 taper into a receptacle for quick-change tool holders. Thanks to the precise taper geometry and the MK4 configuration, the sleeve ensures secure clamping and a high degree of concentricity between spindle and tool. This reduces run-out and helps maintain cutting accuracy across repetitive cycles, making the component a practical choice where consistent machining quality is required. Reduced downtime through quick-change capability Fitted with an ejector screw, the sleeve allows rapid removal of the holder without the need for additional tools, shortening changeover times and improving productivity on the shop floor. The design supports holders with a cylindrical bore, so the adapter serves as a simple but effective interface that minimises handling and streamlines tool management during batch production or mixed-operation setups. Practical compatibility for common toolholder systems Engineered for use with the steel holder head C, the taper sleeve covers a typical application range in clamping technology and toolholding systems. Its 40 mm seating dimension provides a standard connection point for many quick-change holders, reducing the need for bespoke adapters and supporting a modular tooling strategy that keeps inventory lean and versatile. Installation guidance and suitability checks Although the sleeve is straightforward to fit, correct seating and alignment are essential for optimal performance. The component is intended for holders with a cylindrical bore and a matching 40 mm interface; the ejector screw must be tightened to the recommended torque and checked for free operation. For customers seeking confirmation of fit with specific holders or machines, technical guidance is available to verify compatibility and installation best practice. Contact Metav Werkzeuge for a compatibility check or a personalised recommendation — phone +49 2822 7131930 or email info@metav-werkzeuge.com — and benefit from Metav’s extensive range and workshop expertise Technical data SKU: 2000832180NW Product: Morse taper sleeve Brand: TECWERK Suitable for: Steel holder head C Shank design: MK4 Facts Diameter: 40 mm Packaging unit: 1 UID: 2000832180NW Special features For interchangeable holders with cylindrical bore With ejector screw Suitable for quick-change holders Fits steel holder head C FAQ What is the primary use of this taper sleeve? The taper sleeve is intended to adapt an MK4 taper to accept quick-change holders, providing a secure interface for machining operations with the TECWERK accessory (SKU 2000832180NW). Does the sleeve work with steel holder head C? Yes, the Morse taper sleeve is designed specifically to fit the steel holder head C and to accept interchangeable holders with a 40 mm cylindrical seating. How does the ejector screw improve usability? The integrated ejector screw permits fast release of the holder from the sleeve, reducing manual effort and decreasing changeover times during production runs. Is a compatibility check recommended before installation? A compatibility and fit check is advisable; Metav Werkzeuge can provide guidance to confirm that the sleeve and holder combination matches the intended application. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Morse Taper Sleeve MK3 For Steel Toolholder B With Ejector Screw - TECWERK
Take advantage of a compact adapter that delivers reliable compatibility with MK3 tooling and a secure ejection mechanism for fast changeovers; order the component directly via Metav Werkzeuge or consult our specialists for matching holders and integration advice. Morse taper sleeve (MK3, 40 mm) by TECWERK A Morse taper sleeve (MK3, 40 mm) engineered to adapt interchangeable holders with a cylindrical bore for steel holder head B, featuring an integrated ejection screw for straightforward tool removal. Compatible with MK3 interchangeable holders 40 mm nominal diameter for stable fitting Integrated ejection screw for fast tool release Designed for steel holder head B compatibility Faster changeovers with modular tool systems The adapter provides a straightforward way to integrate existing modular tooling into a compact setup. By matching the MK3 shank form and the 40 mm seating, the sleeve reduces the need for multiple dedicated holders, which streamlines inventory and minimises machine downtime. The modular approach supports predictable setup times and improves throughput in mixed-production environments where flexibility is essential. Secure retention and simplified ejection for daily use Retention is ensured by the Morse taper principle, which creates a self-locking fit under load; the incorporated ejection screw enables safe and repeatable tool removal without hammering. This mechanical pairing reduces the risk of damage during changes and maintains concentricity between tool and spindle. For operations where frequent swaps are required, the combination of secure seating and controlled ejection translates into lower handling risk and better component life. Consistent machining quality through precise seating A correctly matched taper sleeve maintains concentricity and limits runout, which directly benefits surface finish and dimensional consistency when working on steel parts with a steel holder head. The adapter’s geometry supports stable clamping forces and reduces vibration, helping to protect cutting edges and achieve repeatable results. For less experienced operators, a reliable taper interface reduces variability in setup and supports predictable production outcomes. Practical workshop integration and parts management The adapter fits existing interchangeable holders with a cylindrical bore and is supplied as a single unit for straightforward stocking. The compact design simplifies storage and organisation in the toolroom. When specifying replacements or upgrades, the clear identification of shank type and nominal diameter makes procurement simpler and reduces the chance of ordering incompatible items, supporting a leaner supply chain. Contact Metav Werkzeuge for ordering advice and assistance matching the TECWERK Morse taper sleeve (MK3, 40 mm) to existing holders; Metav Werkzeuge can supply compatible components directly from their Emmerich warehouse and advise on workshop integration. Technical data Article number: 2000832177NW Type: Morse taper sleeve Brand: TECWERK Compatible with: Steel holder head B Packaging unit: 1 Facts Shank execution: MK3 Nominal diameter: 40 mm Bore diameter: 0 mm Special features For interchangeable holders with cylindrical bore With ejection screw Suitable for: interchangeable holder FAQ What holders is this taper sleeve compatible with? The sleeve is compatible with interchangeable holders that use a cylindrical bore and specifically fits steel holder head B; the MK3 shank form ensures correct seating. How does the ejection screw improve handling? The integrated ejection screw allows controlled separation of the sleeve from the holder, preventing impact damage and making tool changes quicker and safer when using the taper sleeve. Is this product suitable for high-precision tasks? Yes, the taper interface is designed to maintain concentricity and low runout, which supports consistent machining quality in precision work on steel using the MK3 adapter. Can the adapter be used with other shank standards? This sleeve is manufactured for the MK3 shank execution; different shank standards require corresponding adapters to guarantee correct fit and performance. What is the SKU for ordering or reference? Reference SKU 2000832177NW when enquiring about the TECWERK Morse taper sleeve to ensure correct identification of the MK3, 40 mm adapter. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Quick-Change Drill Chuck Supra SK 0.5–10mm Self‑Closing, Reversible Rotation - RÖHM
Take advantage of the combination of self-tightening clamping, a 0.5–10 mm clamping range and a compact B 12 mounting for secure, efficient drilling in demanding workshop environments; order the Supra SK directly via Metav Werkzeuge or consult the Metav specialists for application advice. Supra SK – Keyless drill chuck with B 12 mounting and 0.5–10 mm clamping range (RÖHM) The Supra SK is a self-tightening, keyless drill chuck designed for rapid tool changes and reliable operation in both right- and left-hand rotation. Self-tightening, rapid tool change Wide clamping range 0.5–10 mm B 12 taper for direct mounting Safety lock for hammer drills Secure grip under vibration for uninterrupted production The self-tightening mechanism ensures a consistently high gripping force even when exposed to reversing torques, reducing the risk of bit slippage during heavy-duty or interrupted drilling cycles. Fitted with a safety lock specifically designed for use with hammer drills, this chuck copes with machines that have a high natural frequency by preventing unintended loosening. The result is fewer re‑clamps, less downtime and improved process reliability in repetitive workflows. Rapid tool changes and wide compatibility save cycle time With a clamping range of 0.5–10 mm and a tool-free release, this quick-release chuck enables fast swapping of twist drills and small machining tools, accelerating set-up and changeover. The B 12 mounting allows direct attachment to compatible spindles, while support for right and left rotation offers flexibility for a variety of machining tasks and special applications. These characteristics contribute to a measurable improvement in throughput where short, frequent tool changes are required. Compact design built for workshop endurance A modest 40 mm outer diameter combines low bulk with robust performance, making the chuck suitable for confined spindles and multi-tool heads where space is limited. The compact construction minimises mass on the spindle without compromising clamping reliability, supporting smoother running and reduced wear. Regular inspection and simple cleaning will maintain function; the design is intended for straightforward maintenance cycles common in production and trade workshops. For process-critical drilling tasks choose the Supra SK for dependable, fast clamping — contact Metav Werkzeuge's specialists at their Emmerich hub for tailored recommendations or to arrange supply via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: 4000832131NW Type: Supra SK Product type: Keyless drill chuck Shank / mounting: B 12 Clamping range: 0.5–10 mm Rotation: Right and left rotation Outer diameter: 40 mm Packaging unit: 1 Brand: RÖHM Facts Clamping range 0.5–10 mm Outer diameter 40 mm Packaging unit 1 Special features Self-tightening mechanism for secure clamping Quick clamping and release for rapid tool changes Safety lock for hammer drills with high natural frequency Suitable for right- and left-hand rotation FAQ What clamping range does this chuck cover? The Supra SK quick-release drill chuck (RÖHM, SKU 4000832131NW) covers a 0.5–10 mm clamping range, making it suitable for small twist drills and similar tooling. Is the chuck suitable for hammer drills? Yes. The chuck includes a safety lock designed for use with hammer drills and machines that exhibit a high natural frequency, reducing the chance of unintended loosening. Which spindle mounting is required? The unit uses a B 12 mounting interface; compatibility requires a corresponding B 12 receptacle on the machine spindle. Can it be used in both rotational directions? The chuck is specified for right and left rotation, so it supports applications requiring reversible spindle direction. How should the chuck be maintained for longest life? Routine cleaning of the jaws and light lubrication of moving parts will keep the chuck functioning reliably; the Supra SK’s compact design facilitates straightforward inspection and maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Quick-Change Holder for Round Drill Rods with Prism, 160mm Length - TECWERK
Benefit from precise clamping with an integral prism and a secure 40 mm clamping diameter for reliable repeatability; compatible with quick-change steel holder heads, this holder streamlines tool changes and keeps production moving. Order the interchangeable holder directly via Metav Werkzeuge or consult Metav’s specialists for system integration. Interchangeable holder for Steel holder head C — with prism, 40 mm clamping diameter (TECWERK) The Interchangeable holder for Steel holder head C is engineered to secure round drill rods in quick-change tool systems, providing stable seating and repeatable positioning for workshop and production environments. *Prism securing round drill rods *40 mm clamping diameter *Compatible with steel holder head C *Solid construction for workshop use Precise seating that reduces runout and rework The integrated prism locates round drill rods reliably, turning a cylindrical workpiece into a positively referenced element for machining. Combined with the 40 mm clamping diameter, the arrangement reduces lateral play and helps to maintain concentricity during turning or drilling operations. As a result, setup tolerances are tightened and the need for secondary alignment checks is lowered, which supports consistent part quality and fewer rejects. Designed for fast changeovers and consistent repeatability Compatibility with the quick-change steel holder head C means the mount is optimised for rapid insertion and removal in modular toolholding systems. The geometry of the interface is matched to maintain axial and radial position after each change, which leads to improved repeatability across tool swaps. Shorter changeover times translate into higher effective machine utilisation and more predictable cycle times on batch runs. Robust build for daily workshop demands Constructed for industrial use, the holder’s dimensions—including a height of 40 mm and a working length of 160 mm—provide a stable footprint in the tool chain. The component is intended to withstand the mechanical loads typical of metalcutting operations while keeping clamping forces steady. This robustness minimises vibration transmission to the tool and workpiece, supporting longer tool life and a superior surface finish. Transparent integration and measurable production benefits The device is supplied as a single unit and is suited for direct installation into compatible quick-change systems; this simplicity makes retrofitting straightforward where the interface standard matches. By reducing setup iterations and tool misalignment, the holder contributes to improved throughput and lower rework costs. For projects requiring batch standardisation, the component can be specified as part of a modular tooling concept to ensure uniform performance across multiple machines. Contact Metav Werkzeuge to discuss integration with existing quick-change systems and to arrange supply from our Emmerich warehouse Technical data Article number: 2000832167NW Label: Wechselhalter for Steel holder head C for round drill rods, clamping D.40mm TECWERK Manufacturer: TECWERK Facts Clamping diameter: 40 mm Height: 40 mm Length: 160 mm Packaging unit: 1 Special features With prism for round drill rods For quick-change steel holder head C Designed for round drill rod clamping Suitable for workshop and production toolholding FAQ What clamping diameter does the holder provide? The holder provides a 40 mm clamping diameter as specified for secure fixation of round drill rods. Is this holder compatible with quick-change steel holder heads? Yes, the interchangeable holder is designed for use with the quick-change steel holder head C, ensuring repeatable seating within such systems. What are the main dimensions of the holder? Key dimensions include a height of 40 mm and a working length of 160 mm as listed in the product details. Which types of drill rods does the mount accept? The mount is intended for round drill rods and uses an internal prism to locate and secure cylindrical shanks. Is the material of the holder specified? Material information is not provided in the available product data for SKU 2000832167NW; material details should be requested if required for specific applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Reducer Bush 16mm Bore, Hardened and Ground, L71mm - TECWERK
Combining hardened and ground construction with a 16 mm bore and a 71 mm clamping length, this TECWERK reduction sleeve delivers secure, repeatable clamping for E2 drill-bar applications; order through Metav Werkzeuge or ask our consultants for compatible holders and delivery options. TECWERK reduction sleeve Form 2 — 16 mm bore, 40 mm outer diameter TECWERK reduction sleeve Form 2 is a hardened, ground reducing sleeve for secure clamping of 16 mm drill bars in E2 drill-bar holders, optimised for repeatability and mechanical stability. Hardened and ground for long life 16 mm bore for standard drill shanks 40 mm outer diameter for stable clamping 71 mm clamping length for secure hold Secure, repeatable clamping for production environments The reduction sleeve is engineered to provide a precision fit between the drill bar and the holder, reducing runout and improving repeatability during machining. With a 16 mm bore and a 40 mm outer diameter, the component interfaces cleanly with Form 2 holders, while the 71 mm clamping length increases axial engagement to limit movement under load. These characteristics translate into fewer setup checks, faster changeovers and more consistent part quality on the shop floor. Built for longevity and low maintenance Manufactured hardened and ground, the sleeve resists wear and maintains concentricity over extended service intervals. This durability reduces tool-change frequency and prevents premature rework, supporting higher machine uptime and lower lifetime operating costs. The robust surface finish also eases inspection and seating, so replacement is straightforward when eventual wear occurs, supporting predictable maintenance planning. Easy integration with existing clamping systems Compatibility with E2 drill-bar holders simplifies retrofitting into established tool chains. The sleeve’s standardised dimensions make it suitable for mixed fleets where consistent clamping behaviour is required. For precise assembly, ensure the holder and drill bar faces are clean and lightly lubricated if recommended by the holder manufacturer; correct seating preserves the sleeve’s precision and ensures optimal torque transmission during drilling tasks. For secure, precision clamping from a trusted source, request the TECWERK reduction sleeve via Metav Werkzeuge — our specialists in Emmerich will advise on holder compatibility and delivery to your workshop. Technical Data Article number: 2000834225NW Product: reduction sleeve (Form 2) Manufacturer: TECWERK Packaging unit: 1 Core specifications Bore diameter: 16 mm Outer diameter: 40 mm Clamping length: 71 mm Form: 2 Special features Hardened and ground For E2 drill-bar holders Suitable for drill shank clamping FAQ What sizes does the sleeve accept? The TECWERK reduction sleeve Form 2 accepts a 16 mm nominal bore for drill bars and presents a 40 mm outer diameter for integration with Form 2 holders. Is the sleeve suitable for intensive production use? Yes, the hardened and ground finish of the TECWERK reduction sleeve supports long service life and stable clamping in continuous production environments. How does the 71 mm clamping length benefit machining operations? A 71 mm clamping length on the TECWERK sleeve increases axial engagement, which reduces movement under load and improves repeatability during drilling cycles. Can this sleeve be used with other holder types? The sleeve is specified for Form 2/E2 holders; compatibility with other systems requires verification of external diameter and seating geometry before installation. How should the sleeve be installed for best results? Ensure the holder and drill-bar faces are clean; seat the sleeve fully in the holder and confirm axial engagement to maintain the sleeve’s precision and repeatability. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Reduction Bushing 8mm Bore, Hardened And Ground, L71mm - TECWERK
Precision clamping and repeatable seating are achieved through a hardened, ground finish and exact fit for Form E 2 holders; the compact dimensions (bore Ø8 mm, OD 40 mm, clamping length 71 mm) deliver stable tool retention — order the reduction sleeve directly via Metav Werkzeuge or consult the technical team if clarification is required TECWERK reduction sleeve Form 1 — bore Ø8 mm, OD 40 mm A TECWERK reduction sleeve Form 1 engineered to secure Ø8 mm drill shanks in Form E 2 holders, hardened and ground for consistent concentricity and reliable clamping in industrial and workshop environments Hardened and ground for precision For drill shank holders Form E 2 Clamping length 71 mm for stable hold Bore Ø8 mm, outer diameter 40 mm Consistent clamping for repeatable results The reduction sleeve provides a compact, precise interface between the drill shank and the holder. Thanks to the hardened and ground finish, the sleeve reduces micro-movement under load, which supports repeatable bore quality and longer tool life. Where repeatability across batches matters, the combination of exact inner diameter and defined clamping length ensures a stable seating surface that minimises runout and vibration during drilling. Compact dimensions that improve stability With a bore of 8 mm, an outer diameter of 40 mm and a clamping length of 71 mm, the sleeve balances compactness with sufficient engagement length to resist bending moments in typical toolholding setups. The relatively long engagement compared with the small bore produces a secure hold for short shank tools, delivering better concentricity than ad hoc adaptations. These dimensions make it suitable for confined spindle spaces while still providing robust clamping performance. Designed for integration in Form E 2 systems Compatibility is a core advantage: the sleeve is produced for use with Form E 2 drill shank holders, enabling straightforward integration into existing clamping systems without modification. The standardised form factor simplifies inventory and reduces changeover time on the shop floor. Where machine-tool interfaces are standardised, this approach reduces setup complexity and supports efficient process repeatability. Practical benefits for production and workshops Beyond immediate technical gains, the sleeve supports economic operation by lowering scrap rates and reducing rework. The ground surface helps ensure uniform contact and easy inspection for wear, while the robust construction means predictable service intervals. For toolrooms and maintenance teams seeking compact, reliable toolholding accessories, this reduction sleeve offers a focused solution that complements precision tooling inventories Request tailored application advice or place a direct order with Metav Werkzeuge for prompt delivery and specification confirmation — Metav’s consultants can advise on compatibility and inventory needs Technical data Article number: 2000834222NW Item: Reduction sleeve, Form 1 Brand: TECWERK Core dimensions Bore diameter d1: 8 mm Outer diameter d: 40 mm Clamping length L: 71 mm Features / Applications Hardened and ground For drill shank holders Form E 2 Suitable for precision clamping FAQ What are the exact dimensions of the reduction sleeve? The TECWERK reduction sleeve Form 1 (SKU 2000834222NW) has a bore of 8 mm, an outer diameter of 40 mm and a clamping length of 71 mm. Is the sleeve compatible with Form E 2 holders? Yes — the component is specified for use with drill shank holders Form E 2 and is manufactured to provide a precise fit for that interface. What advantage does the hardened and ground finish provide? The hardened and ground surface increases wear resistance and improves seating accuracy, which reduces runout and supports repeatable hole quality in production. How is the sleeve installed into the holder? The sleeve is inserted into the corresponding Form E 2 holder and secured according to the holder’s clamping procedure, providing a concentric locating surface for the drill shank. Which work environments benefit most from this sleeve? Toolrooms, small-batch production and industrial workshops that require stable clamping of Ø8 mm shank tools will gain the most from the sleeve’s precision and compact form Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Screw Jack Adjustable 40–50mm Height 30 Kg Capacity - Vertex
Take advantage of the combination of adjustable height, compact footprint and reliable load capacity to streamline assembly and fixture tasks. Order the screw jack directly via Metav Werkzeuge or ask our consultants if needed. VSJ-40 Screw Jack by Vertex — adjustable height 40–50 mm, 30 kg load The VSJ-40 Screw Jack is a compact mechanical lifting device designed for fine height adjustment in workshop and assembly environments, suitable where precise, repeatable elevation control is required. Adjustable height 40–50 mm Rated load 30 kg Diameter 40 mm compact footprint Lightweight at 0.3 kg Precise height control for repeatable setups The VSJ-40 offers precision adjustment through a screw mechanism that converts rotary input into reliable linear movement. With an adjustable height range of 40–50 mm, the device enables small, accurate corrections in fixtures and sub-assemblies without the need for complex machinery. The clear measurable parameters, including a 30 kg rated load and diameter 40 mm, provide a decisive basis for selecting an appropriate lifting element for light-duty tasks, allowing planners to compare requirements objectively and avoid costly overspecification. Compact, low-mass design for versatile placement A compact design and low weight (0.3 kg) make this lifting element straightforward to integrate into constrained workspaces and portable assemblies. The reduced mass eases manual handling during setup and repositioning while minimising additional load on support structures. For workshop environments and small-scale production, the combination of a small footprint and robust rated capacity positions this unit as an efficient solution for precision levelling and temporary support, balancing ease of use with engineering suitability. Simple function, clear benefits for assembly workflows The screw-drive principle delivers controlled, backlash-minimised movement for fine levelling and height compensation. This mechanical simplicity translates into low maintenance requirements and predictable behaviour over many cycles, contributing to consistent process outcomes. Supplied under the Vertex brand, the unit is documented with essential identifiers and measurements that facilitate procurement and integration into bills of materials, enabling efficient stock management and clear specification communication across teams. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex VSJ-40 screw jack and to arrange supply through our quality-filtered distribution network. Technical Data Article number: VSJ-40 GTIN: 4061905084805 Manufacturer: Vertex Facts Diameter: 40 mm Adjustable height: 40–50 mm Max load: 30 kg Weight: 0.3 kg eClass: 21044290 Special features Screw-drive for precise linear adjustment Compact footprint for constrained spaces Lightweight construction for easy handling Suited to workshop and assembly tasks FAQ What maximum load can the screw jack handle? The VSJ-40 screw jack is rated for a 30 kg maximum load as specified by Vertex. What is the adjustable height range of this lifting element? Adjustment is possible between 40–50 mm, allowing fine corrections in setup and alignment. Is the unit suitable for tight installation spaces? Yes, the 40 mm diameter and compact design make it appropriate for constrained work areas and fixtures. How much does the screw jack weigh? The device has a weight of approximately 0.3 kg, facilitating manual handling and repositioning. Which applications are typical for this screw jack? Typical uses include fine levelling, fixture height compensation and small assembly adjustments where repeatable, precise elevation control is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
40mm Short Striking Rod Clamp Size 3, M8 x 35 Actuator, 2.5 kN Holding Force - AMF
Take advantage of a compact, short-bodied clamping solution that combines a 2500 N clamping force with a 40 mm stroke for reliable fixture in restricted spaces; order directly via Metav Werkzeuge or ask our consultants for compatibility advice. AMF Pushrod clamp No. 6844 (Size 3) — short design, 2500 N clamping force AMF Pushrod clamp No. 6844 is a compact pushrod clamp designed for reliable clamping in confined machine and assembly environments Short design for compact installations Push force up to 2500 N 40 mm stroke for secure engagement Actuation screw M8 x 35 Minimise setup time with compact, powerful clamping The compact short design delivers a high clamping force in a small envelope, making it suitable for fixtures where space is at a premium. With a maximum holding and pressing force of 2500 N and a 40 mm stroke, this clamp enables fast, repeatable locking of workpieces while reducing interference with adjacent tooling. The combination of high force and reduced footprint helps to maintain production flow and reduce cycle interruptions without sacrificing grip strength. Straightforward integration and clear technical interfaces Designed for easy assembly into existing fixtures, the clamping unit features an M8 x 35 actuation screw and an M20x1.5 thread for secure mounting. Key dimensions such as H1 123 mm, L1 108 mm, A 12 mm and B 57 mm provide predictable clearances for layout planning. The plunger stroke and mounting threads are specified to industry conventions, which simplifies retrofitting and minimises engineering time. For less experienced users, this clear specification set reduces uncertainty during installation and commissioning. Reliable performance in repetitive production environments Built for repeated cycles, the device shows consistent holding characteristics suitable for assembly, jigs and light machining tasks. The robust actuation geometry and defined HW range 22–35 mm ensure secure contact and predictable behaviour under load. Where process stability is essential, this clamp contributes to lower scrap rates and improved throughput thanks to predictable positioning and dependable engagement. The product’s mechanical simplicity supports ease of maintenance and long service intervals. For sourcing, technical match or delivery from Emmerich, contact Metav Werkzeuge—our consultants will advise on application fit and supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4123665300NW Type: 6844 Product name: AMF Pushrod clamp No. 6844 Size 3 short Brand: AMF Packaging unit: 1 Facts Maximum pressing force: 2500 N Maximum holding force: 2500 N Stroke (Hub): 40 mm H1: 123 mm L1: 108 mm L3: 115 mm A: 12 mm B: 57 mm E: 25 mm HW min.: 22 mm HW max.: 35 mm L2: 16 mm N: 33 mm Actuation screw: M8 x 35 Thread M2: M20x1,5 Special features Short form construction for tight spaces Actuation via M8 x 35 screw Defined mounting and interface dimensions for simple integration Suitable for fixtures, jigs and assembly applications FAQ What is the maximum clamping force of the AMF Pushrod clamp No. 6844? The maximum pressing and holding force of the AMF Pushrod clamp No. 6844 (SKU 4123665300NW) is 2500 N. Which stroke length does this clamp offer and how does it affect application? The unit provides a 40 mm stroke, which allows for secure engagement with variable workpiece heights while maintaining a compact assembly footprint. What mounting interfaces are available for integration? The clamp uses an M8 x 35 actuation screw and includes an M20x1.5 threaded interface for mounting and actuation connection, simplifying integration into existing jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Stud Screw M6 Heat-Treated Grade 8.8, DIN 6379 - AMF
Take advantage of metric compatibility and standard conformity combined with hardened performance for dependable fastening in production and maintenance work; the combination of DIN 6379 compliance, M6 thread and property class 8.8 delivers consistent mechanical integrity. Order the part directly via Metav Werkzeuge or consult our technical team for application-specific advice. AMF Stud screw DIN 6379 M6 x 40 mm, tempered to 8.8 AMF Stud screw DIN 6379 M6 x 40 mm, designed for metric assemblies where standardised strength and repeatable fit are required DIN 6379 standard conformity Property class 8.8 strength Thread M6 for metric assemblies 40 mm overall length Reliable strength for secure mechanical joints The product adheres to the DIN 6379 specification and is tempered to property class 8.8, which indicates a quenched-and-tempered finish intended for demanding fastening tasks. This treatment improves tensile performance and wear resistance, offering a reliable solution where shear and clamp forces are relevant. The result is a fastening component that reduces risks of premature failure and supports longer service intervals in workshop and light-industrial environments. Precision thread and consistent dimensions for easy installation Manufactured with a M6 metric thread and an overall length of 40 mm, the component provides predictable engagement with matching nuts and threaded holes. Metric conformity simplifies part selection across common assemblies, while dimensional consistency minimises rework and fitting time. The controlled geometry supports accurate torque application and repeatable clamping, which benefits both assembly-line efficiency and maintenance operations that rely on dependable interchangeability. Practical choice for production, maintenance and stock consolidation As a standardised fastening element, this AMF stud screw is suitable for general mechanical assemblies in workshops, plant maintenance and small-scale production. The simple specification aids inventory management and reduces procurement complexity, while sourcing via Metav ensures a European quality filter and steady supply. For purchasers aiming to consolidate suppliers without compromising on conformity, this component supports streamlined logistics and straightforward replacement strategies. For guaranteed conformity and reliable supply, request the AMF stud screw via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for specification checks and availability. Technical Data Article number: 4000833241NW Product: Stud screw (Stiftschraube) Brand: AMF Standard: DIN 6379 Core specifications Thread: M6 Overall length: 40 mm Width: 9 mm Packaging unit: 1 Material and features Tempered to property class 8.8 Label: Stiftschraube DIN6379 M6x40mm vergütet auf 8.8 AMF Additional dimension b: 20 FAQ What standard does this component comply with? The component is specified to DIN 6379, confirming its geometry and production tolerances for the intended application. What is the thread and size of the part? This stud screw uses an M6 metric thread and an overall length of 40 mm, as stated on the AMF product label (SKU 4000833241NW). What does property class 8.8 mean for performance? Property class 8.8 denotes a hardened finish suitable for higher-strength applications; the tempering process improves load-bearing capacity and wear resistance. Can this part be used in industrial maintenance tasks? Yes, the metric design and standard conformity make it appropriate for routine maintenance and general mechanical assemblies where DIN 6379 components are specified. Is the part supplied individually or in bulk packs? The technical data lists a packaging unit of 1, indicating single-piece supply for this SKU. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm T-Slot Bolt M10 Strength Class 10.9, DIN 787 - AMF
Take advantage of the combination of industrial standard conformity, M10 compatibility and grade 10.9 strength for dependable fixture clamping; order directly via Metav Werkzeuge or consult the team for specification advice. T-slot screw DIN 787 — 10 mm T-slot, M10 x 40 mm (AMF) The T-slot screw DIN 787 is a high-strength clamping fastener designed for securing fixtures and tooling in 10 mm machine table T-slots. DIN 787 standard for industrial compatibility High-strength grade 10.9 for secure clamping M10 metric thread for standard tooling Fits 10 mm T-slots, overall length 40 mm Consistent clamping force through recognised standardisation The use of the DIN 787 specification ensures a predictable interface between table, clamp and fastener, reducing setup variance across repeated assemblies. Manufactured to grade 10.9, the screw offers high-strength characteristics that translate into greater clamp preload and less loosening under vibration; this is particularly relevant for medium- to heavy-duty machining where steady holding power matters. The metric M10 thread provides broad compatibility with standard clamping hardware and makes replacement straightforward when maintenance is required. Precise fit in 10 mm T-slots for repeatable setups A precise geometry for the 10 mm T-slot combined with an overall 40 mm length gives a reliable engagement depth for clamps and support elements, promoting repeatable positioning of workpieces. The head and shank geometry create a secure mechanical seat inside the slot, which limits lateral play and supports accurate fixturing. For workshop planners and production engineers, this means shorter setup times and fewer adjustments between jobs, contributing directly to process efficiency and uptime. Reliability and integration for workshop use Built to perform as part of standard fixturing systems, this fastener supports modular clamping concepts and integrates easily with existing tooling plates and clamps. The robust mechanical properties reduce the frequency of fastener replacements, helping to maintain a steady production rhythm. Sourcing through an established distributor further ensures consistent supply and traceability, which aids quality control processes and procurement planning in assembly and machining environments. For procurement or technical advice on AMF grade 10.9 T-slot screws, contact Metav Werkzeuge for tailored support and supply information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000603196NW Standard: DIN 787 Product: T-slot screw Thread: M10 T-slot size: 10 mm Length: 40 mm Strength class: 10.9 Manufacturer: AMF Packaging unit: 1 Dimensions & measurable data Addition A: 9.7 Addition B: 30 Addition E: 15 Addition K: 6 Special features Metric thread for standard fixtures Conforms to DIN 787 for interchangeability High-strength class for secure clamping Suitable for machine table fixturing FAQ What T-slot size does this screw fit? This T-slot screw fits a 10 mm T-slot and is dimensioned for reliable seating in that slot size. What does grade 10.9 signify for this fastener? Grade 10.9 indicates a high-strength fastener class; the AMF T-slot screw in 10.9 offers elevated tensile strength and improved clamp retention compared with lower classes. Is the thread standard metric M10? Yes, the screw uses an M10 metric thread, ensuring compatibility with common nuts and clamping components. Can this screw be used for heavy-duty clamping on machine tables? The high-strength class and DIN 787 conformity make this screw suitable for demanding fixturing tasks on machine tables. What is the overall length and how does it affect fixture selection? The overall length is 40 mm, which determines the maximum clamping thickness and should be matched to clamp and workpiece stack-up. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Taper Sleeve MK4 For Toolholder With Ejector Screw, Cylindrical Shank - TECWERK
Take advantage of a compact conversion sleeve that combines reliable MT4 clamping with a 40 mm cylindrical bore and an integrated ejection screw for efficient tool changes. Order the sleeve directly via Metav Werkzeuge or ask our consultants for application advice. Morse taper sleeve for steel holder head B — MT4, 40 mm, TECWERK Morse taper sleeve for steel holder head B designed as a conversion sleeve for interchangeable holders with a 40 mm cylindrical bore; ideal for secure clamping in lathe and turning tool setups. MT4 Morse taper for reliable clamping 40 mm cylindrical bore for interchangeable holders Integrated ejection screw for fast removal Compatible with steel holder head B Secure connection for consistent machining A robust Morse taper interface provides a vibration-resistant seating that maintains concentricity during cutting operations. The MT4 specification ensures compatibility with standard Morse taper spindles and toolholders, while the 40 mm cylindrical bore adapts the holder to a wide range of interchangeable systems. This combination reduces runout and helps to keep cutting forces stable, which in turn improves surface finish and tool life. The design is particularly suited to production-focused workshops that require repeatable results without lengthy setup times. Faster tool changes and straightforward maintenance The sleeve features an ejection screw, allowing quick and safe removal from the holder without hammering or improvised tools. The presence of the ejection mechanism shortens changeover times and simplifies maintenance routines, supporting higher machine uptime. The conversion sleeve’s straightforward geometry makes inspection and cleaning uncomplicated; any routine check can be carried out with standard measuring gauges to verify taper seating and bore condition. These practical advantages translate into measurable productivity gains on the shop floor. Versatile retrofit for steel holder head B applications Engineered for use with steel holder head B, the conversion sleeve adapts existing holders to accept interchangeable tooling with a cylindrical bore. The adaptor function lets workshops standardise on a single spindle taper while keeping a variety of toolholders in service. Where tool flexibility and quick reconfiguration are priorities, the conversion sleeve acts as a compact and durable solution to expand capability without extensive retooling. Compatibility and ease of integration make it a pragmatic choice for both repair and upgrade scenarios. Contact Metav Werkzeuge for precise retrofit guidance on this TECWERK conversion sleeve — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific holder combinations Technical data Article number: 2000832178NW Label: Morse taper sleeve for steel holder head B MT4 AD 40mm TECWERK Brand: TECWERK Packaging unit: 1 Facts Shaft execution: MT4 Diameter (d): 40 mm Bore diameter: 0 mm Packaging unit: 1 Design and special features For interchangeable holders with cylindrical bore With ejection screw Compatible with interchangeable holder Suitable for steel holder head B Intended for MT4 taper FAQ What machines is this sleeve compatible with? The TECWERK Morse taper sleeve is designed for MT4 taper systems and for use with steel holder head B; compatibility depends on matching the machine spindle or holder taper to MT4. How does the ejection screw work and why is it useful? The integrated ejection screw enables safe removal of the sleeve from the holder without impact, facilitating faster tool changes and reducing wear on the taper seating. Can this sleeve adapt existing holders to cylindrical-bore interchangeable tooling? Yes, the conversion function allows interchangeable holders with a cylindrical bore to be used where an MT4 taper seating is required, supporting flexible tool setups. Is this product suitable for heavy-duty turning operations? The MT4 taper and solid design provide a reliable clamping interface for many turning tasks; assessment of specific cutting parameters and toolholder combinations is recommended. What is the article number for ordering or reference? The article number is 2000832178NW and should be quoted when enquiring about the TECWERK conversion sleeve. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Threaded Rod With Magnet, 30 Kg Load Capacity - Vertex
Compact magnetic fixturing is achieved with a 40 mm diameter body and an integrated magnet, delivering a secure 30 kg holding capacity for reliable workshop use; order the part via Metav Werkzeuge or consult the team for application advice. Vertex Threaded Rod VSJM-50 — magnetic fixturing, 40 mm diameter The Threaded Rod with Magnet is a compact fixturing element designed for rapid magnetic clamping in workshop and light industrial setups. Magnetic fastening for quick securing 40 mm diameter for stable support Rated max load 30 kg Lightweight 0.4 kg for easy handling Faster setup through secure magnetic holding The integrated magnet provides magnetic holding that significantly reduces setup time compared with mechanical clamping solutions. With a 40 mm diameter and a rated max load of 30 kg, the component is dimensioned to deliver consistent holding force for jigs, temporary fixtures and small assembly tasks. The magnetic function allows workpieces to be positioned and repositioned swiftly, which improves throughput and reduces non-productive time. Technical terms such as “holding capacity” refer to the force the magnet exerts on a ferrous surface; in practice this means stable support during light machining and inspection operations. Compact format that supports flexible workflows A compact height of 47 mm and a low mass of 0.4 kg make the rod easy to handle and integrate into existing setups. The small footprint is advantageous where space on tooling plates or workbenches is limited, and the modest weight simplifies storage and transport between workstations. The form factor suits modular fixturing systems and portable test rigs, enabling faster changeovers without the need for heavy clamping hardware. For users with varied batch sizes, the component’s portability contributes to a more agile production flow while maintaining reliable contact with workpieces. Consistent performance and clear industrial use cases Manufactured under the Vertex brand, the VSJM-50 is specified for workshop fixturing, temporary holding during assembly and inspection operations where magnetic attachment is appropriate. The design combines a straightforward mechanical interface with the practical benefits of a magnetised element, making it suitable for applications such as toolroom setups, light milling jigs and gauge fixtures. Material information is not specified in the available data, so compatibility is assumed for ferrous substrates only; the magnetic function will not perform on non-ferrous materials. The clear specification of diameter, height and load rating supports selection decisions and reduces the need for trial-and-error in procurement. For reliable magnetic fixturing with the Vertex VSJM-50, contact Metav Werkzeuge for purchasing and application guidance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VSJM-50 GTIN: 4061905084164 Brand: Vertex ECLASS: 23110301 Facts Diameter: 40 mm Height: 47 mm Max. load: 30 kg Weight: 0.4 kg Special features Integrated magnet Compact design for fixturing Suitable for workshop applications FAQ What load can the threaded rod carry? The Vertex threaded rod VSJM-50 is rated for a maximum load of 30 kg. Is the magnetic function suitable for vertical fixturing? The integrated magnet provides secure holding on ferrous surfaces for both vertical and horizontal positioning in light-duty applications. What are the key dimensions to consider for integration? Diameter 40 mm, height 47 mm and weight 0.4 kg are the primary dimensions to plan for when incorporating the part into fixtures. Is the material of the rod specified in the product data? The available product data does not specify the material used for the component. Which applications are typical for this component? Common uses include workshop fixturing, temporary clamps for assembly and inspection fixtures where magnetic attachment to ferrous materials is acceptable. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
40mm Threaded Rod With Magnet, 65mm Height, 30 Kg Load Capacity - Vertex
Take advantage of a compact magnetic fastening solution that combines secure holding, practical handling and easy integration into standard clamping routines. The integrated magnet with a rated holding capacity of 30 kg and a robust 40 mm diameter supports reliable temporary fixturing; order directly via Metav Werkzeuge or consult the Metav team for application advice. Threaded rod with magnet VSJM-70 — 40 mm diameter, 30 kg holding capacity (Vertex) The threaded rod with magnet is a compact magnetic fastening component intended for light-duty fixturing and temporary clamping tasks in workshop and assembly environments Magnetic anchoring for quick positioning Holds up to 30 kg static load 40 mm diameter for stable support Compact 65 mm height for tight spaces Lightweight construction at 0.5 kg Secure magnetic hold for temporary fixturing The integrated magnetic base delivers dependable positioning where fast set-up and repeatable placement are priorities. With a 30 kg rated holding capacity, the component is suitable for light to moderate static loads often encountered in assembly jigs, inspection fixtures and portable clamping arrangements. The design uses a standard threaded interface to allow mechanical connection to existing fixtures, enabling a straightforward switch from temporary magnetic fastening to bolted retention where required. This reduces set‑up times and minimises repositioning errors, contributing to a more efficient workflow. Space-saving, ergonomic design for constrained work areas A 40 mm diameter combined with a 65 mm overall height produces a low-profile solution that fits into confined spaces without sacrificing stability. At 0.5 kg, the unit is easy to handle and reposition, making it suitable for mobile test benches and on‑site adjustments. The compact form factor supports integration into fixtures where access is limited or multiple anchor points are needed in close proximity. Reduced bulk therefore permits denser fixture layouts and quicker reconfiguration during short production runs. Practical compatibility and reduced setup complexity Engineered for straightforward integration, the component interfaces with common clamping assemblies via its threaded connection, simplifying retrofitting into existing systems. The magnetic attachment allows non-invasive clamping on ferrous substrates and can serve as a temporary anchor during alignment or inspection. This approach lowers the need for additional tooling during short-cycle tasks and supports modular fixturing philosophies that value flexibility and quick interchangeability of clamp points. Reliability and supply assurance for production use Sourced from a recognised brand, the unit is supplied through an established European distribution channel that acts as a quality filter for workshop supplies. This supply route is designed to ensure consistent availability and to back the component with traceable identification for procurement and inventory control. The combination of reliable magnetic performance, compact dimensions and a clear product identity supports predictable integration into standard workshop operations and professional toolsets. Contact Metav Werkzeuge for tailored application guidance on the Vertex magnetic threaded rod and to secure reliable delivery from the Emmerich quality filter Technical data Article number: VSJM-70 GTIN: 4061905087592 Manufacturer: Vertex Facts Diameter: 40 mm Height: 65 mm Maximum load (static): 30 Kg Weight: 0.5 kg eClass: 23110301 Special features Integrated magnet for magnetic anchoring Threaded connection for fixture integration Compact, low‑profile design Lightweight for portable use FAQ What is the maximum holding capacity of the VSJM-70? The VSJM-70 has a rated static holding capacity of 30 kg, suitable for light to moderate temporary fixturing applications. What are the main dimensions of the unit? The component features a 40 mm diameter and an overall height of 65 mm, with a weight of 0.5 kg. Is the magnetic element removable or adjustable? The product specification confirms an integrated magnet; no details on removability or adjustable magnet settings were provided. Can the threaded rod be used on non‑ferrous materials? Magnetic anchoring is effective on ferrous substrates; for non‑ferrous materials, mechanical fixation via the threaded interface is recommended to achieve secure attachment. Which identifiers help with procurement and inventory? Use the article number VSJM-70 and GTIN 4061905087592 for ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
40mm Toggle Clamp Horizontal Foot With Metal Handle, 2,000N Closing Force, Galvanised - Kukamet
Take advantage of galvanised construction and compact dimensions combined with a reliable 2,000 N clamping action and 2,500 N holding capability for secure, repeatable fixtures; order the 361 toggle latch clamp from Metav Werkzeuge or consult our specialists for application advice. 361 toggle latch clamp — Kukamet horizontal-base toggle latch with galvanised finish and metal grip A 361 toggle latch clamp for quick, secure fastening in workholding and fixture applications, offering a horizontal base for flush mounting and a hooked latch for positive engagement Galvanised steel for corrosion resistance Horizontal base for flush mounting Metal grip for robust handling 2,500 N holding force for secure locking Reliable clamping for repeatable fixtures The 361 toggle latch clamp delivers consistent clamping force and secure locking where repeatability matters. With a rated 2,000 N clamping action and 2,500 N holding force, the device provides defined restraint for jigs, fixtures and access panels, reducing rework and setup time. The clear numerical ratings allow planners to calculate safety margins and cycle loads, supporting a predictable production flow and minimising downtime. Durable design built for workshop environments Constructed from galvanised material with a metal grip, this clamp resists corrosion and stands up to everyday workshop use. The compact unit weighs 0.25 kg and features a hooked latch for reliable engagement under vibration. The robust handle offers comfortable actuation while maintaining mechanical longevity, so maintenance cycles are extended and replacement intervals are reduced, supporting cost-effective operation. Practical mounting and application advantages A horizontal base with a threaded engagement length of 40 mm enables flush mounting on plates, frames and fixtures where space is limited. The toggle mechanism provides quick-action locking that shortens handling times during assembly or clamping operations. Given its straightforward mounting and positive-lock hook, the component is suitable for repetitive securing tasks in manufacturing cells and maintenance jigs, improving handling efficiency. Trusted supply and service from Metav for industrial needs Sourcing Kukamet components through Metav adds logistical and quality assurance benefits: central supply from Emmerich, defined stock handling and a broad range of complementary workholding items. The combination of a proven toggle design and a dependable distribution partner supports continuous production and simplifies procurement, offering both technical reliability and supply-chain confidence. Choose the Kukamet 361 toggle latch clamp for robust, repeatable clamping and source it directly via Metav Werkzeuge for fast, dependable delivery from Emmerich — contact Metav at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical Data SKU: 361-3 GTIN: 8680731509984 Manufacturer: Kukamet Model: 361 Weight: 0.25 kg Core data Max clamping force: 2,000 N Max holding force: 2,500 N Thread length: 40 mm Design / Special features Material: galvanised steel Mounting: horizontal base Metal grip With hook Category: toggle latch clamp eClass: 21041718 ETIM: EC011973 FAQ What is the maximum clamping force of this toggle latch? The Kukamet 361 toggle latch clamp provides a maximum clamping force of 2,000 N and a holding force rated to 2,500 N for secure fastening. Can the clamp be mounted flush to a workpiece? Yes, the clamp uses a horizontal base designed for flush mounting; the threaded engagement of 40 mm facilitates stable installation in fixture plates. Is the 361 suitable for use in humid or corrosive environments? The 361 is made from galvanised steel and includes a metal grip, offering increased corrosion resistance suitable for standard workshop and light industrial conditions. What applications suit this type of latch clamp? This toggle latch clamp is suitable for jigs, fixtures, access panels and repetitive securing tasks where rapid locking and reliable holding are required. How is the 361 supplied and who distributes it? The Kukamet 361 toggle latch clamp (SKU 361-3) is distributed via Metav Werkzeuge, ensuring centralised stock and consistent supply for industrial buyers. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Tool Holder E1 For Indexable Drill With Through-Coolant, DIN 69880 - TECWERK
Take advantage of the standardised VDI30 interface and DIN 69880 compliance for reliable clamping and consistent runout, combined with an internal coolant connection and a 40 mm clamping diameter for improved cycle stability; order the holder directly via Metav Werkzeuge or ask our consultants if further integration support is required. Tool holder E1 DIN 69880 (VDI30) for indexable insert drills — TECWERK The Tool holder E1 DIN 69880 (VDI30) is a compact, standardised holder designed for secure clamping of indexable insert drills and for tools requiring through-tool coolant in drilling and turning applications. Form E1, VDI30 interface for stable clamping Compatible with DIN 69880 standard Internal coolant supply for effective chip evacuation Cylindrical shank, compact 90 mm length Improved machining accuracy through standardised clamping Standard interfaces reduce variance at the spindle and help maintain concentricity. The combination of the VDI30 interface and DIN 69880 conformity ensures repeatable seating and predictable runout characteristics, which directly improves hole quality when using indexable insert drills. A consistent clamping system lowers setup time and minimises rework, so the process becomes both faster and more reliable. Coolant-fed design that extends tool life and keeps chips under control The integrated internal coolant channel supports positive coolant delivery to the cutting edge, assisting with heat dissipation and chip evacuation. Better coolant flow reduces thermal stress on inserts and can extend tool life, particularly in deep or high-feed drilling. For operations where cooling and chip management matter, the through-coolant capability translates into fewer interruptions and steadier cycle times. Compact E1 form for rigidity and straightforward installation The E1 form with a cylindrical shank and a modest overall length of 90 mm balances accessibility and stiffness. The reduced overhang helps to lower vibration and improve stability during entry and plunge operations, while the compact envelope simplifies integration into existing turret or spindle setups. The geometry therefore supports stable cutting conditions without sacrificing accessibility in crowded tool magazines. Ready integration for combined drilling and turning operations Designed for tools used in drilling and turning with through-tool coolant, the holder offers broad compatibility with standard indexable drilling assemblies and VDI-based tool turrets. The compact design suits medium-duty production and job-shop environments where robust, repeatable clamping is required. The Tool holder E1 DIN 69880 (VDI30) from TECWERK is particularly suited to applications that prioritise cycle stability and ease of tool exchange. For tailored technical advice and to source the TECWERK tool holder directly from Metav Werkzeuge, contact our specialists at Metav Werkzeuge for support with application matching and integration guidance. Technical data SKU: 2000833665NW Product type: Tool holder for indexable insert drills Brand: TECWERK Form: E1 Standard: DIN 69880 Label: Werkzg.h.E1 DIN 69880 Spann-D.40mm VDI30 z.Wendeplattenbohrer TECWERK UID: 2000833665NW Core dimensions Clamping diameter d2: 40 mm Holder diameter d1: 30 mm d3: 65 mm d6: 68 mm l1: 90 mm l3: 22 mm h1: 28 mm h2: 30 mm Special features For indexable insert drills For drilling and turning tools with internal coolant supply Cylindrical shank VDI30 interface Form E1 FAQ What interface standard does the holder use? The holder uses the VDI30 interface and conforms to DIN 69880, providing standardised mechanical and dimensional compatibility for VDI-based systems. Does the holder support through-tool coolant? Yes. The holder is configured for internal coolant supply to assist with chip evacuation and cooling at the cutting edge. Which tools are compatible with this holder? Compatible tools include indexable insert drills and other drilling/turning tools designed for through-coolant operation; the holder is intended for tool assemblies that mate with a VDI30 interface. What are the key dimensions for setup? Clamping diameter d2 is 40 mm, overall length l1 is 90 mm, and relevant diameters and heights are listed in the core dimensions for machine integration. Is the holder suitable for automated tool changes? Yes. The DIN 69880 conformity and VDI30 interface facilitate repeatable seating and reliable exchanges in systems built for VDI-style toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Tool Holder For Boring Bars E2 With Internal And External Coolant Feed, DIN 69880 - TECWERK
Take advantage of precise clamping, integrated coolant management and DIN 69880 conformity for reliable boring operations; order the TECWERK E2 toolholder directly via Metav Werkzeuge or contact our consultants for bespoke advice. TECWERK E2 Toolholder for Boring Bars (VDI40, Clamping Ø 40 mm) The TECWERK E2 toolholder is a Form E2 clamping solution for boring bars, designed for DIN 69880-compatible VDI40 interfaces and fitted with both internal and external coolant supply Internal and external coolant supply Clamping diameter 40 mm Form E2, DIN 69880 compatible Cylindrical shank for simple installation Secure clamping with controlled coolant flow The E2 design provides consistent clamping for boring bars with a nominal clamping diameter of 40 mm, ensuring secure axial and radial support during machining. Built to the DIN 69880 interface, the holder mates with standard VDI40 tool turrets to preserve alignment and repeatability across setups. The combination of internal and external coolant supply improves cooling at the cutting edge and supports chip evacuation, which helps to maintain cutting-edge life and process stability. Where accuracy matters, the mechanical fit and standard interface reduce runout and variation between cycles. Faster setup and less preparation for the bar A practical benefit of this holder is that no material removal of the bar is required before installation: no shortening of the boring bar necessary. The carrier accepts boring bars with a cylindrical shank, allowing rapid exchange and fewer preparatory steps on the shop floor. For production environments that value throughput, the simplified handling and standardised mounting cut changeover time and reduce error sources. The toolholder is not through-drilled, so coolant routing is designed to match common machine tool coolant schemes while retaining the holder’s mechanical integrity. Built for dependable machining cycles This toolholder combines robust mechanical design with features that support repeatable operations and serviceability. The Form E2 geometry and VDI40 compatibility provide predictable positioning for finishing and roughing passes, while integrated coolant channels give process engineers choices for optimising tool life. Although compact, the holder’s dimensions and interfaces are selected to balance stiffness with accessibility, making it suitable for a wide range of boring tasks where stability and precision are required. Documentation and measured interfaces support straightforward integration into existing tool setups. For secure clamping and straightforward integration, contact Metav Werkzeuge for ordering and technical consultation on the TECWERK E2 toolholder – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000833685NW Product type: Toolholder for boring bars Manufacturer: TECWERK Form: E2 Packaging unit: 1 UID: 2000833685NW Facts Clamping diameter d2: 40 mm d1: 40 mm d6: 83 mm d8: 82 mm h1: 32.5 mm l3: 22 mm l6: 90 mm Special features For boring bars Cylindrical shank Internal and external coolant supply No shortening of the boring bar necessary Standard: DIN 69880 Through-drilled: no Interface: VDI40 FAQ Is the holder compatible with VDI40 tool turrets? Yes. The TECWERK E2 toolholder is designed for VDI40 interfaces and conforms to DIN 69880, ensuring compatibility with standard VDI40 tool turrets; SKU 2000833685NW identifies this specific configuration. Does the toolholder require the boring bar to be shortened before use? No. One of the practical advantages of this E2 holder is that no shortening of the boring bar is necessary, allowing immediate installation of bars with a cylindrical shank. Can coolant be supplied through the holder? Yes. The design offers internal and external coolant supply. Note that the carrier is specified as not through-drilled, so coolant routing follows the holder’s channel configuration rather than a through-hole bore. What are the key dimensions to check before ordering? Key dimensions include clamping diameter d2 = 40 mm, overall length l6 = 90 mm and flange-related measures d6 = 83 mm / d8 = 82 mm; these values are listed for planning the assembly with machine fixtures. For which applications is this toolholder intended? The holder is specified for use with boring bars and is intended for turning and boring operations where a standardised VDI40 connection and controlled coolant delivery improve process stability and repeatability. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Tool Holder For Indexable Drills With Internal Coolant, Form E1, DIN 69880 - TECWERK
Take advantage of the combination of VDI40 clamping, DIN 69880 conformity and internal coolant compatibility for steady production performance; Order the TECWERK tool holder E1 (SKU 2000833670NW) directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Tool Holder E1 (DIN 69880) — VDI40, 40 mm clamping diameter TECWERK Tool Holder E1 is a VDI40 tool holder for indexable insert drills, designed for use with tools featuring internal coolant supply and compliant with DIN 69880. 40 mm clamping diameter VDI40 DIN 69880 compliant E1 form Internal coolant supply compatible Consistent concentricity for dependable hole quality The holder provides a 40 mm clamping interface in the standard VDI40 format, ensuring reproducible concentricity and reduced runout compared with non-standard interfaces. Thanks to the DIN 69880 specification, the component guarantees a defined geometry for repeatable mounting and alignment, which translates into consistent hole tolerances and fewer scrap parts. For production environments where cycle stability matters, the precise clamping geometry supports reliable process control and predictable tool behaviour. Controlled coolant flow for extended tool life and improved finishes Built for tools with internal coolant feed, this holder maintains directed lubrication to the cutting edge, which promotes chip evacuation, reduces thermal load and helps to extend tool life. The optimised coolant path works in tandem with indexable drills to improve surface finish and dimensional stability, particularly in deep-hole or interrupted cutting operations. For workshops seeking to reduce tool consumption and rework, the controlled coolant capability delivers a tangible improvement in machining economy and part quality. Rigid interface and precise dimensions for machine integration The holder’s E1 form with a cylindrical shank supports secure seating in the spindle and rapid changeovers while preserving axial stability. Measured dimensions and standard interface reduce set-up time and simplify tool inventory management across compatible machines. The robust connection minimises vibration and contributes to better insert performance, enabling higher feed rates and stable cutting conditions on CNC centres and drilling rigs alike. Broad compatibility and pragmatic workshop benefits Designed for indexable insert drills and suitable for combined drilling and turning operations that require internal coolant, the holder integrates into modular tool systems with ease. The standard-compliant design reduces the risk of incorrect pairing and shortens commissioning when introducing new tooling. For procurement, the open specification and conformity to established norms make substitution and spare-part planning straightforward, supporting uninterrupted production and predictable maintenance cycles. For tailored specification advice and speedy supply from Metav Werkzeuge, request the TECWERK VDI40 tool holder E1 (SKU 2000833670NW) by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: 2000833670NW Product type: Tool holder for indexable insert drills Brand: TECWERK Form: E1 Facts Clamping diameter d2: 40 mm Clamping diameter d1: 40 mm h1: 32.5 mm d3: 65 mm l3: 22 mm d6: 83 mm l1: 90 mm Standard: DIN 69880 Special features Compatible with indexable insert drills Cylindrical shank Internal coolant supply compatible Suitable for drilling and turning with internal coolant FAQ What machines is the holder compatible with? The TECWERK tool holder E1 (tool holder for indexable insert drills, SKU 2000833670NW) fits spindles and turrets that accept VDI40 interfaces and is intended for machines that support holders to DIN 69880 geometry. Does the holder support internal coolant? Yes. The holder is designed for use with tools that have internal coolant feed, enabling targeted coolant delivery to the cutting edge for improved tool life. Which drill types can be mounted with this holder? Indexable insert drills and combined drilling/turning tools designed for VDI40 and DIN 69880 mounting can be used with this holder to ensure correct seating and performance. Are standard dimensions available for planning tool setups? The holder provides defined dimensions such as clamping diameters 40 mm, h1 32.5 mm and l1 90 mm, matching DIN 69880 to simplify setup and reduce alignment effort. Is this holder suitable for high-speed machining? Compatibility with high-speed applications depends on machine and tool combination; the VDI40 interface and solid clamping geometry support stable conditions, while coolant routing helps manage thermal load during demanding cycles. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm x 25mm x 25mm Horseshoe Magnet AlNiCo 500 90N Holding Force, Max Temp 450°C - TECWERK
Take advantage of AlNiCo 500 construction and a 90 N holding force combined with high-temperature capability for reliable, long-term clamping; order the horseshoe magnet directly via Metav Werkzeuge or contact our specialists for application advice. Horseshoe Magnet L40×B25×H25 – AlNiCo 500, 90 N holding force (TECWERK) The horseshoe magnet L40×B25×H25 is a compact magnetic clamp for workshop and light industrial fixtures, designed for secure holding where elevated temperature resistance is required Robust AlNiCo 500 construction 90 N holding force for secure fixing 5 mm bore for mounting Rated for 450 °C continuous use Consistent, predictable magnetic performance for demanding work The magnet delivers a defined 90 N holding force, making it suitable for repetitive clamping and simple fixturing tasks where reproducible retention is important. Constructed from AlNiCo 500, the alloy combines good magnetic stability with thermal resilience; this means the magnetic properties remain more consistent at elevated temperatures than many ferrite alternatives. The specification for 450 °C maximum service temperature highlights its suitability for assemblies that are exposed to heat during processing. Where process reliability and consistent clamping are priorities, this material choice reduces the risk of performance drift and supports predictable production cycles. Space-saving dimensions and straightforward mounting With compact external dimensions of 40 x 25 x 25 mm and a central 5 mm bore, the component is engineered for easy integration into jigs, tooling plates or bespoke fixtures. The horseshoe form concentrates the magnetic field between the poles, enabling effective contact on small contact areas without excessive bulk. The through-hole offers a simple mechanical fixing option that keeps the magnet securely positioned while allowing rapid installation or replacement. For workshops optimising bench layout or retrofitting existing devices, the size and mounting design permit flexible use in restricted spaces. Durable handling and compatibility with post-processing The magnet is designed with practical workshop workflows in mind: the material and construction tolerate elevated temperatures, and the specification notes a painting temperature of 200 °C, which allows for certain finishing steps without compromising magnetic integrity. Packaged as a single unit, the item suits one-to-one replacements or small-batch assembly tasks. Applications range from holding fixtures and positioning aids to light tool retention where a compact, heat-resistant magnetic solution is required. The combination of material choice and geometry supports repeatable performance over many cycles, contributing to reduced downtime and increased process reliability. For application guidance or to reserve the TECWERK horseshoe magnet L40×B25×H25, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise technical assistance and supply information. Technical data Article number: 4000832262NW Manufacturer: TECWERK Product type: Horseshoe magnet Packaging unit: 1 Facts Dimensions: 40 x 25 x 25 mm Holding force: 90 N Bore diameter: 5 mm Max operating temperature: 450 °C Painting temperature: 200 °C Materials & features Material: AlNiCo 500 Shape: Horseshoe magnet High-temperature resistance Single-unit packaging FAQ What maximum temperature can the magnet withstand without loss of function? The magnet is specified for a maximum operating temperature of 450 °C; the TECWERK horseshoe magnet L40×B25×H25 has been produced in AlNiCo 500 to provide thermal stability at elevated temperatures. What mounting options are available for this magnet? Mounting is via the central 5 mm bore, which permits secure mechanical fixing in jigs or fixtures while maintaining the magnet’s compact footprint. Which applications are best suited to this type of magnet? Typical uses include simple clamping, positioning aids and light fixturing in workshops and production cells where compact size and thermal resistance are required. Is the product delivered as a single item or in sets? The item is supplied as a single unit (packaging unit 1); refer to article number 4000832262NW for ordering. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40x25mm Flange M18x2.5mm Thread - Vertex
Take advantage of the combination of a secure M18x2.5 threaded connection, a compact 40 x 25 mm footprint and low mass for smooth, repeatable assemblies — order the flange directly via Metav Werkzeuge or consult our specialists for specification support. Flange – M18x2.5 threaded connection, compact 40 x 25 mm, Vertex A Flange designed for compact mechanical assemblies and standard metric threaded interfaces, ideal where space is at a premium and reliable mechanical joining is required. M18x2.5 threaded connection Compact 40 x 25 mm footprint Lightweight 0.1 kg construction Precise, repeatable threaded connections for machinery The component provides a M18x2.5 metric thread, a configuration that combines a nominal diameter of 18 mm with a 2.5 mm thread pitch. This geometry delivers a secure fit and predictable clamping behaviour, reducing axial play and easing torque control during assembly. For engineers and technicians who rely on consistent joint performance, the defined thread geometry minimises rework and simplifies torque specification. The clear metric designation also supports interoperability with standard fasteners and tools compliant with ISO metric thread standards. Space-saving geometry that streamlines installations With a 40 x 25 mm footprint and a mass of 0.1 kg, the part is tailored for installations where compactness matters. The reduced envelope helps lower overall assembly inertia and can improve dynamic response in moving subassemblies. Its compact design also allows closer component packing on assemblies and simplifies fixture design, enabling cleaner layouts on jigs and subframes. Fewer spatial constraints translate into faster mounting and reduced cycle time when integrating multiple components into confined spaces. Simple design for robust, predictable performance The uncomplicated geometry focuses on functionality and serviceability, reducing potential failure points and making inspection straightforward. The metric thread facilitates use with standard torque wrenches and thread gauges, ensuring consistent clamping force across production batches. Where traceable, repeatable performance is required, a straightforward mechanical part often offers greater reliability than more complex alternatives; the design supports easy verification with commonly available inspection tools. Traceability and supply-chain readiness for production use Marked for procurement and inventory control, the part is supplied under the Vertex brand and is ready for integration into commercial workflows. Identification data such as the unique product code and global item number enable rapid ordering and stock management. For purchasing and planning teams, this degree of traceability reduces lead-time uncertainty and simplifies quality checks during incoming inspection, aiding a smooth flow from warehouse to workshop. Contact Metav Werkzeuge in Emmerich for availability and tailored procurement advice on Vertex flanges — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4516 GTIN: 4061905092695 Brand: Vertex Facts Dimensions: 40 x 25 mm Thread: M18 x 2.5 mm Weight: 0.1 kg Special features Type: Flange eClass: 37029205 Category: Vertex FAQ What does M18x2.5 mean in practical terms? M18x2.5 specifies a metric thread with an 18 mm nominal diameter and a 2.5 mm pitch; the Vertex flange (SKU 4516) uses this standard for consistent mating with metric fasteners. Is this component suitable for compact assemblies? Yes — the 40 x 25 mm footprint and low mass make the part appropriate for tight layouts and applications where space optimisation is important. How heavy is the part and why does that matter? The item weighs 0.1 kg, a low mass that reduces added inertia in moving systems and simplifies handling during assembly. How can the part be identified for ordering and inventory? Identification is possible via the GTIN 4061905092695 and the internal article number 4516, ensuring accurate procurement and stock control. Can this flange be used with standard metric nuts and bolts? The flange’s M18x2.5 metric thread is compatible with standard metric fasteners meeting the same thread specification, enabling straightforward integration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
40x25mm Flange With 3/4-10" Thread - Vertex
Combine a standard 3/4-10" thread with a compact 40 x 25 mm footprint and a lightweight 0.092 kg construction for secure, low-mass connections in clamping and machining setups; order the flange directly via Metav Werkzeuge or ask our consultants for application advice. Flange 4516I — 3/4-10" threaded flange, compact 40 x 25 mm (Vertex) The Flange 4516I is a compact, threaded flange designed for secure component fastening in machining and clamping assemblies, offering a space-saving form factor for confined installations. 3/4-10" standard thread Compact 40 x 25 mm footprint Lightweight at 0.092 kg Secure connections with standard threading The central benefit of this component is its standard 3/4-10" thread, which ensures straightforward compatibility with a wide range of fixtures and adaptors. The standardised thread reduces the need for bespoke connectors and simplifies procurement and inventory management. In practice, this means faster setup times and fewer connection failures under repeat assembly cycles. The thread is designed to provide consistent axial clamping force when paired with matching threaded components, supporting repeatable mechanical performance in routine production or maintenance tasks. Small footprint that saves space without compromising strength With dimensions of 40 x 25 mm, the flange delivers a noticeably reduced installation envelope compared with larger alternatives. This compact size enables integration into confined assemblies or retrofits where minimising intrusion is critical. Despite the small footprint, the part supports reliable mechanical engagement by concentrating fastening forces efficiently; the reduced bulk can also improve access for tool operation and inspection. The compact design therefore benefits workshops and production lines where space optimisation and accessibility are priorities. Low mass for reduced system load and easier handling Weighing just 0.092 kg, the component contributes minimal additional mass to assemblies, which is advantageous where dynamic balance or reduced inertia matters—such as in rotating fixtures or mobile fixtures. The low weight also makes manual handling and positioning quicker and less strenuous during assembly or maintenance. For systems where weight reduction supports overall efficiency, the flange helps to lower bearing loads and can simplify transport and storage logistics in the workshop environment. Simple specification for dependable procurement The product’s clear technical identifiers—SKU 4516I and GTIN 4061905088803—support unambiguous ordering and stock management. The concise specification reduces the risk of procurement errors and ensures that purchasing and stores staff can match the component to drawings and bills of materials without extensive cross-referencing. As a standardised mechanical part, it is suited to streamlined supply chains and repetitive production contexts where repeatability and traceability are essential. Contact Metav Werkzeuge for stock availability and tailored advice on integrating this Vertex flange into existing fixtures; technical consultation and ordering support are available via email, telephone or WhatsApp. Technical data Article number: 4516I GTIN: 4061905088803 eClass: 37029205 Facts Weight: 0.092 kg Dimensions: 40 x 25 mm Thread: 3/4-10" Special features Designation: Flange Manufacturer: Vertex FAQ What thread standard does the flange use? The flange features a 3/4-10" thread, suitable for interfacing with standard 3/4-10" male or female threaded components. Can this flange be used in rotating fixture assemblies? Yes, the low mass (0.092 kg) and compact form factor make the flange appropriate for rotating fixtures where reduced inertia is beneficial. How does the flange support space-constrained installations? The 40 x 25 mm footprint permits installation in confined areas while maintaining reliable mechanical engagement for clamping and fastening tasks. What identifiers help with ordering and inventory? Use SKU 4516I and GTIN 4061905088803 to ensure accurate procurement and stock tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com