Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
50.3mm Self‑Centric Drill Chuck J6 Taper, Keyless, 31kg - Vertex
Secure clamping and mass-supported vibration damping combine to improve tool repeatability and reduce rework. Featuring a self-closing mechanism, J6 taper interface and a nominal diameter of 50.3 mm, this clamping unit is ready for heavy production use. Order the drill chuck directly via Metav Werkzeuge or ask our consultants if needed. Vertex 13XHSP self-closing drill chuck — J6 taper, 50.3 mm The Vertex 13XHSP self-closing drill chuck is a heavy‑duty clamping solution for machines with a J6 taper, engineered to secure rotating tools and reduce vibration during machining. Self-closing clamping mechanism 50.3 mm nominal diameter J6 machine taper interface High mass for reduced vibration Designed for durable, production-grade clamping The 13XHSP is built around a self-closing clamping principle that secures the tool as spindle torque increases, providing a reliable hold without manual tightening. With a 50.3 mm nominal diameter and a substantial mass of 31 kg, the unit contributes to vibration damping at the spindle interface; the higher inertia of the chuck reduces oscillation and helps maintain concentricity in through‑cutting operations. These effects translate into better surface finish and fewer rejected parts, supporting continuous production runs with less interruption. Seamless integration with J6 taper spindles The clamping unit mates via a J6 taper, enabling direct mounting to compatible spindles commonly found on industrial drilling and milling machines. The taper interface ensures axial alignment and simple mechanical connection without additional adapters where the machine accepts J6. The mechanical simplicity of the interface reduces setup time and facilitates repeatable positioning after maintenance or tool change‑overs, which is especially valuable in cell production and CNC lines where reproducibility is a priority. Robust construction that lowers operating risk Designed for heavy‑duty use, the chuck’s robust construction offers reliable secure clamping under high loads and during extended cycles. The mass and build quality contribute to stable tool behaviour, which reduces the likelihood of chatter and tool deflection. Fewer machining errors and consistent clamping behaviour decrease unplanned downtime and help protect cutting tools, providing a measurable effect on overall equipment effectiveness and process reliability. Contact Metav Werkzeuge in Emmerich to discuss specifying the Vertex 13XHSP self-closing drill chuck (SKU 11025) for production use; our consultants will advise on integration and availability Technical data Article number: 11025 GTIN: 4061905095573 Type: 13XHSP Manufacturer: Vertex Machinery Works Co., Ltd. Eclass: 21020490 ETIM: EC002125 Core data Diameter: 50.3 mm Taper: J6 Weight: 31 kg Special features Self-closing clamping mechanism Suitable for heavy-duty machining High mass for improved vibration damping FAQ Which machines is this chuck compatible with? The chuck is compatible with machines that accept a J6 taper; the Vertex 13XHSP is intended for direct mounting to such spindles where a J6 interface is specified. What is the nominal diameter and why does it matter? The nominal diameter is 50.3 mm; this dimension relates to the chuck’s clamping bore and affects tool capacity and the mechanical stiffness available at the toolholder. How heavy is the chuck and what is the benefit of that weight? The chuck weighs 31 kg; the higher mass assists with vibration damping, which can improve finish and reduce tool wear during heavy or interrupted cuts. Does the self-closing mechanism require manual tightening? No. The self-closing design of the Vertex 13XHSP uses spindle torque to increase clamping force, eliminating the need for manual clamping during operation. What identifier should be used when ordering or enquiring? Use SKU 11025 or GTIN 4061905095573 when enquiring about the Vertex 13XHSP to ensure correct specification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50.3mm Self‑Centring Drill Chuck B16 Taper, 31kg - Vertex
The combination of a self‑tightening clamping mechanism, a precise 50.3 mm diameter and a B16 taper ensures stable toolholding and reduced run-out for consistent hole quality. Order or request specialist advice directly via Metav Werkzeuge to integrate this component into production workflows. Drill chuck 13XHSP – self‑tightening, 50.3 mm, B16 taper (Vertex) A drill chuck designed for secure, repeatable clamping in light to medium industrial drilling and machining operations with a standard B16 spindle taper Self-tightening design for secure grip 50.3 mm overall diameter Tapered mount B16 for universal spindles Robust 31 kg construction for stability Consistent clamping for accurate drilling The self‑tightening mechanism provides a reliable increase in clamping force under load, which improves positional repeatability and reduces the tendency for bit slippage. This results in consistent hole quality and fewer rework cycles, especially when paired with a rigid spindle mount. The nominal 50.3 mm dimension indicates the outer size relevant for installation envelopes and tool clearance, while the B16 taper ensures a standardised interface for many small spindles. Compatibility and straightforward integration Mounting on machines with a B16 taper is straightforward, enabling quick replacement and minimal downtime. The compact design suits toolrooms and smaller production lines that require a secure connection without major spindle modification. Where spindle balance and run-out matter, the mass and geometry of the chuck contribute to stable rotation, supporting machining activities that demand precision and repeatable results. Durable build to reduce vibration and extend tool life A higher mass in the chuck assembly helps dampen vibration during operation, which supports longer drill and tool life and improves surface finish. The construction emphasises robust construction and dimensional stability so that clamped tools retain alignment under cutting forces. For operations that alternate between drilling and light milling, the improved stability from this unit lowers the risk of chatter and contributes to predictable process outcomes. Practical handling and workshop benefits Maintenance requirements are kept practical through a simple design that allows inspection and cleaning without specialist tooling. The combination of repeatability and ease of servicing supports efficient workshop routines and predictable throughput. Where procurement and supply reliability are priorities, Metav Werkzeuge acts as a local quality filter in Europe, offering decades of distribution knowledge and a broad catalogue of precision components to streamline sourcing decisions. For tailored technical advice or a compatibility check contact Metav Werkzeuge in Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and a production‑oriented recommendation. Technical data Article number: 11027 GTIN: 4061905095597 Brand: Vertex Type: 13XHSP Facts Diameter: 50.3 mm Weight: 31 kg Taper: B16 EClass: 21020490 ETIM: EC002125 Special features Self-tightening mechanism Designation: Drill chuck, self-tightening SKU: 11027 Robust construction for stability FAQ How does the self‑tightening mechanism affect clamping reliability? The self‑tightening principle increases clamping force as torque rises, so the drill chuck maintains grip under load and reduces slip during drilling operations. Is the unit compatible with standard B16 spindles? Yes, the 13XHSP model from Vertex mounts to a B16 taper, making it suitable for spindles designed for that taper standard. What is the significance of the 50.3 mm dimension? The 50.3 mm figure refers to the outer diameter relevant for installation space and clearance when fitting the chuck on a spindle or within a toolholding assembly. Can this chuck be used in production environments with frequent tool changes? The design emphasises quick mounting and reliable repeatability, making this self‑tightening chuck appropriate for workshops that require frequent tool swaps while maintaining stability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
5000 N Hold Force Vertical Clamp 168.5mm Arm, Angle Base, Massive Holding Arm - Kukamet
Take advantage of a massive holding arm and a compact 168.5 mm reach to secure workpieces reliably; the combination of a blackened finish and robust lever action ensures longevity in production environments. The clamp’s high holding capacity, paired with a moderate actuating force, supports stable fixturing and repeatable results — order the vertical clamp directly via Metav Werkzeuge or ask the consultants for matching accessories. 213 vertical clamp with massive holding arm, 5,000 N holding force (Kukamet) 213 vertical clamp is a compact lever clamp designed for vertical holding and positioning in workshop jigs, welding fixtures and production tooling. Massive holding arm for stable fixation Holding force up to 5,000 N Angled foot for simple mounting Blackened finish for corrosion resistance 168.5 mm clamp arm for compact reach Consistent clamping performance for repeatable production The 213 vertical clamp offers clearly defined performance values that support predictable manufacturing processes. With a holding force of 5,000 N and an actuating or clamping force of 4,500 N, the device separates the functions of secure retention and lever actuation: the larger holding capacity maintains workpiece position during machining or welding while the actuation force remains manageable for manual or mechanised operation. The massive holding arm reduces deflection under load, which improves part tolerances and reduces rework. In practice, this results in fewer interruptions on assembly lines and more consistent part quality when integrated into modular fixturing systems. Space-saving mounting and reliable operation on varied fixtures Designed with an angled foot mounting the clamp installs on vertical plates and fixture faces with minimal interference to surrounding tooling. The 168.5 mm arm provides a good balance between reach and compactness, allowing close-packed clamping stations without compromising access. The blackened finish offers a degree of surface protection while also reducing glare and visual wear in busy workshops. At a mass of 1.734 kg, the unit is light enough for portable jig assemblies yet solid enough to resist vibration and mechanical shock. The lever clamp action is intuitive for operators and compatible with pneumatic or automated actuation when used in repeatable process stations. Suited applications and practical maintenance notes This lever clamp is suitable for holding, positioning and repeatable workpiece securing in welding fixtures, assembly benches and inspection jigs. The combination of a bulky arm and high holding capacity makes it particularly effective where lateral forces or vibration are present. Routine maintenance is straightforward: periodic lubrication of the pivot and visual inspection of the arm and mounting threads preserve clamping consistency. The compact mechanical design avoids complex adjustments, which shortens downtime during maintenance intervals. For integration into larger tooling systems, the model is identified by SKU B213-5-D-C2 and can be specified alongside other Kukamet components for standardised fixture design. For specification matching, spare-part queries or to order the Kukamet 213 vertical clamp through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com for personalised advice and availability. Technical Data SKU: B213-5-D-C2 GTIN: 8680731508079 Manufacturer: Kukamet Category: Spanner ECLASS: 21041717 ETIM: EC011973 Data Weight: 1.734 kg Arm length: 168.5 mm Maximum clamping (actuating) force: 4,500 N Maximum holding force: 5,000 N Special features Massive holding arm Angled foot mounting Blackened (black burnished) finish Lever clamp design Compact, workshop-ready construction FAQ What is the difference between the clamping and holding forces? The clamping (actuating) force of 4,500 N moves the lever and secures the mechanism; the holding force of 5,000 N denotes the maximum retention capacity once engaged. The Kukamet 213 vertical clamp separates actuation from retention to maintain position under load. Can the clamp be mounted on vertical fixture plates? Yes. The angled foot mounting is intended for attachment to vertical plates and fixture faces, enabling secure installation in modular jigs. Is the 213 clamp suitable for welding fixtures? Yes. The robust arm and high holding capacity make the 213 suitable for applications with vibration or lateral forces, such as welding and heavy assembly tasks. How much space does the clamp require in a packed fixture? With a 168.5 mm arm and a compact body mass of 1.734 kg, the clamp is designed for close-packed stations while maintaining access for operation and maintenance. What material finish does the clamp have and what is its benefit? The clamp features a blackened (black burnished) finish which offers surface protection and reduces glare, helping to prolong service life in industrial environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000 N Vertical Clamp 4500 N Thrust, Zinc-Plated, Right-Angle Foot - Kukamet
Take advantage of the combination of robust clamping force, galvanised corrosion protection and a compact angled base for flexible fixture setups; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Vertical Clamp 213 — galvanised lever clamp, 4,500 N clamp force The Kukamet Vertical Clamp 213 is a compact lever-style workholding solution for assembly, welding and jigging applications, offering reliable holding force with a right-angled mounting base. Galvanised construction for corrosion resistance Holding force 5,000 N for secure clamping Clamp force up to 4,500 N for solid contact Angle base mounting for flexible positioning Reliable clamping for repeatable production results The vertical design delivers a stable, repeatable hold that reduces setup time in small-batch and serial production. The holding force of 5,000 N and a clamp force up to 4,500 N are specified values that translate into dependable part retention during machining, welding or assembly. The galvanised finish resists workshop humidity and light corrosion, maintaining clamping performance over time. Where consistent workholding is critical, the lever mechanism ensures a fast, tactile lock with minimal operator adjustment. Precise adjustment and straightforward mounting Equipped with an M12x80 pressure spindle, the clamp provides fine vertical adjustment to accommodate varying workpiece heights and allow controlled contact pressure. The angle base (right-angled mounting) offers flexible positioning on fixture plates or jigs, enabling compact layouts and easy integration into existing tooling. At a mass of 1.76 kg, the component is rigid enough to resist movement while remaining simple to handle during fixture changes. These features make the clamp suitable for tight workspaces and modular jig systems. Low-maintenance design for durable workshop use Built as a classic lever clamp, the unit combines mechanical simplicity with long service life; wear parts are readily inspectable and replacement is uncomplicated. The galvanised steel body reduces the need for frequent surface treatment, and the robust construction supports repeated opening and closing cycles typical in production environments. The compact footprint and mechanical reliability make this clamp a pragmatic choice for maintenance-conscious shops seeking an economical yet effective workholding element. For tailored advice and reliable supply of Kukamet vertical clamps, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery Technical data SKU: 213-5 Model: 213 GTIN: 8680731509366 Manufacturer: Kukamet Facts Max clamp force: 4,500 N Holding force: 5,000 N Weight: 1.76 kg Pressure spindle: M12x80 Special features Galvanised material Angle base mounting (right-angled) Lever-style vertical clamp Category: Clamps / Spanner FAQ What clamping and holding forces does this clamp provide? The Kukamet vertical clamp 213 offers a clamp force of up to 4,500 N and a holding force rated at 5,000 N, making it suitable for demanding workshop tasks. Which spindle size is fitted for height adjustment? The clamp uses an M12x80 pressure spindle for fine vertical adjustment and controlled contact pressure. Is the clamp suitable for use in humid or mildly corrosive environments? Yes, the galvanised finish on the clamp provides enhanced resistance to corrosion and is appropriate for typical workshop conditions. How is the clamp mounted to a fixture or jig? Mounting is performed via the angled base (right-angled), which allows secure attachment to fixture plates and versatile positioning in jigs and assemblies. What are typical applications for this type of clamp? Common uses include assembly fixtures, welding jigs, and machining setups where a compact, reliable vertical hold is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000 N Vertical Clamp With M12x80 Pressing Spindle, Angle Base, Blackened - Kukamet
Benefit from a compact, robust clamp that combines high holding force, a 4.5 kN clamping capacity and an angled base for flexible mounting — ideal for fixtures and jigs. Order the Kukamet clamping solution directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Vertikalspanner 213 – Vertical clamp with angled base and high holding force The Kukamet Vertikalspanner 213 is a compact vertical clamp designed for secure, repeatable holding in industrial and workshop setups. High holding force of 5 kN 4.5 kN clamping capacity for strong fixation Angled base for flexible mounting Durable blackened finish for workshop use Secure clamping where stability matters The vertical clamp delivers dependable locking capability through a defined difference between clamping force (4.5 kN) and holding force (5 kN), ensuring workpieces remain stable during machining or assembly. This distinction is important: the clamping pressure is the active force applied, while the higher holding value represents the maximum retention under load. Such performance reduces rework and scrap by maintaining part position during drilling, milling or inspection, supporting efficient process control in production environments. Flexible mounting and extended surface protection An angled base allows the clamp to be installed in confined fixtures and on angled plates, increasing adaptability within tool jigs and machine tables. The component’s blackened finish provides a protective layer that resists light corrosion and reduces glare in precision areas; this finish is a practical choice for busy workshops where both durability and operator visibility matter. The compact format and choice of mounting style simplify integration into existing clamping systems. Fast handling and straightforward adjustment for workshop workflows A spindle with M12x80 thread enables fine adjustment of contact pressure and accommodates repeatable setup heights, while the lever-clamp design referenced by the item’s trigger ensures quick engagement and release for high-throughput operations. With a weight of 1.76 kg, the unit is both robust and manoeuvrable, easing fixture changes and reducing setup time. The clamp suits industrial users, maintenance teams and specialist trades seeking reliable, repeatable clamping without excessive bulk. Choose the Kukamet Vertikalspanner 213 for consistent, space-saving clamping — order via Metav Werkzeuge and consult our team at info@metav-werkzeuge.com or +49 2822 7131930 for rapid delivery and fitting advice Technical data Article number: B213-5 Name: Vertikalspanner 213 Brand: Kukamet GTIN: 8680731508055 eClass: 21041717 ETIM: EC011973 Facts Weight: 1.76 kg Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Spindle thread: M12x80 Special features Mounting: angled base Finish: blackened finish Design: vertical / lever clamp No additional special features indicated FAQ What materials can be machined while using this clamp? The Vertikalspanner 213 from Kukamet secures components made from common workshop materials; the clamp’s robust holding capacity supports operations on metals and non-metal parts when used with appropriate jaws and fixtures. How is the clamp mounted to a fixture or machine table? Mounting is via the angled base, which enables attachment to flat or angled surfaces; the spindle specification M12x80 permits fine height adjustment during installation. Is the finish suitable for industrial environments? Yes, the blackened finish provides surface protection against light corrosion and is appropriate for standard workshop conditions, improving longevity and reducing surface reflections. Can the clamp be used for quick-change fixtures? The lever-style vertical design supports fast engagement and release, making it suitable for fixtures where repeatable, quick part changes are required. Which SKU should be ordered for this model? Order the clamp under SKU B213-5; this identifies the Kukamet Vertikalspanner 213 in our inventory. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Hold Force Vertical Clamp 120° Angle, 1500N Thrust, Blackened Finish - Kukamet
Take advantage of the combination of a 5,000 N holding arm, a defined 1,500 N clamping force and a compact, 1.18 kg design for secure, repeatable fixturing in busy workshops — order the vertical clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertikalspanner 221 — Vertical lever clamp with 5,000 N holding arm (Kukamet) The Vertikalspanner 221 is a compact vertical lever clamp designed for machine tables and jigs where secure retention and consistent clamping are required, featuring a horizontal-foot mounting for stable installation. 5,000 N holding arm for secure clamping 1,500 N maximum clamping force Horizontal-foot mounting for stable set-up Compact 1.18 kg lightweight design Secure retention for vibration-prone operations The high holding force of 5,000 N provided by the reinforced holding arm minimises slippage and accidental release under dynamic loads. Because the retention mechanism is engineered to resist pull-off forces well above the applied clamping force, the clamp maintains workpiece position during machining or assembly, reducing rework and inspection cycles. The robust retention also supports more aggressive cutting parameters where consistent fixturing is critical. Predictable clamping performance for consistent results With a rated clamping force of 1,500 N and a 120° operating range, the clamp delivers reproducible force with every actuation, improving batch-to-batch consistency. The horizontal foot mounting ensures a low-profile, rigid connection to fixtures and plates, which translates into narrower tolerances on critical dimensions. For process planners, this means fewer set-up iterations and a clearer relationship between clamping geometry and part quality. Space-saving design that fits versatile fixtures Weighing 1.18 kg, the clamping unit offers a favourable stiffness-to-weight ratio that keeps fixtures compact without sacrificing strength. The lightweight construction simplifies handling during jig assembly and allows multiple units to be integrated without overloading positioning elements. Where footprint and modularity matter, this lever clamp supports flexible layouts and fast reconfiguration of production tooling. Durable finish and straightforward integration The blackened finish provides corrosion resistance and a non-reflective surface that suits workshop environments. The clamp’s geometry and standardised mounting make it straightforward to include in custom jigs or modular clamping systems; part numbers and identifiers such as SKU 221-4-C and GTIN 8682843520383 assist in procurement and inventory. For customers requiring assistance with fixture design or selection, Metav’s application advisers can provide technical guidance and compatibility checks. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertikalspanner 221 into production jigs — request application support or a specification check from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 221-4-C GTIN: 8682843520383 eClass: 21041717 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 1.18 kg Holding force: 5,000 N Clamping force: 1,500 N Angle: 120° Special features Finish: blackened finish Mounting: horizontal foot Holding arm with 5,000 N holding force Type: vertical lever clamp FAQ What is the difference between holding force and clamping force on this clamp? The Vertikalspanner 221 specifies a holding force of 5,000 N, which indicates the retention capacity of the holding arm, and a clamping force of 1,500 N, which represents the applied compressive force; the larger holding rating ensures secure retention under lateral or tensile loads. How is the clamp mounted to a fixture or table? Mounting is via a horizontal foot, allowing rigid, low-profile fixation to plates and jigs consistent with typical fixture layouts for vertical lever clamps. Can this clamp be used in compact, multi-clamp setups? Yes — the 221’s 1.18 kg mass and compact footprint make it suitable for multi-clamp arrangements where space and weight are limited while maintaining repeatable clamping. What finish does the clamp have and why is that relevant? The unit features a blackened finish, offering improved corrosion resistance and a matte surface that reduces glare and wear in workshop conditions. Is the operating angle suitable for standard lever clamp actions? The clamp operates across a 120° angle, providing a broad actuation range that accommodates common lever motions and ergonomic handle paths. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Hold Force, 4500N Clamping Force 168.5mm Vertical Clamp With Angular Base, Galvanised, Massive Arm Safety Lock - Kukamet
Taking advantage of a robust combination of a heavy-duty holding arm, safety lock and zinc-plated finish ensures reliable clamping and minimal downtime in production and fixture work; order the clamp via Metav Werkzeuge or request technical advice from our consultants for integration into existing jigs. Kukamet 213 Vertical Clamp — Zinc-plated angle-base clamp with 5,000 N holding force The 213 vertical clamp is a compact, angle-base clamping solution designed for secure workholding in jigs, fixtures and assembly stations. Heavy-duty holding arm with safety lock Zinc-plated corrosion protection Angle-base mounting for versatile fit Up to 5,000 N holding force Reliable clamping power for stable production The clamp delivers a holding force of 5,000 N with a maximum pressing force of 4,500 N, providing stable retention of workpieces during machining or assembly. High holding and pressing figures translate into reduced part movement and fewer reworks, which improves process reliability. The distinction between the two values is practical: the pressing force indicates the actuation thrust, while the holding force indicates the retained load under shear and vibration — both metrics are decisive when specifying a clamp for a fixture. Robust construction that reduces maintenance Constructed with a zinc-plated finish and a heavy-duty arm, the device resists corrosion in busy workshop environments and requires minimal upkeep. The integrated safety lock prevents unintended release of the clamping lever, supporting safe operation where repeated actuations occur. With an overall mass of 1.64 kg and an arm length of 168.5 mm, the clamp balances compact dimensions with mechanical sturdiness, making it suitable for confined fixture layouts without sacrificing durability. Quick mounting and straightforward integration into jigs The angle-base mounting allows adaptable installation on plates and brackets, simplifying retrofit into existing jigs and assembly fixtures. Its compact footprint facilitates space-saving layouts and predictable clamp travel, enabling consistent clamping cycles in automated or manual stations. Identification and procurement are straightforward thanks to the SKU and GTIN information provided in the technical data, which supports inventory control and traceability in production environments. Contact Metav Werkzeuge for advice on specifying the Kukamet 213 vertical clamp from our Emmerich warehouse and receive application-focused guidance from our workshop specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 213-5-D-L-C2 GTIN: 8680731502152 Brand: Kukamet Type: Vertical clamp Facts Max holding force: 5,000 N Max pressing force: 4,500 N Arm length: 168.5 mm Weight: 1.64 kg eClass: 21041717 ETIM: EC011973 Special features Zinc-plated material Angle-base (Winkelfuß) mounting Massive holding arm and safety lock Suitable for fixtures and jigs Category: Spanner FAQ What is the maximum holding capacity of this clamp? The Kukamet 213 vertical clamp provides a holding force of 5,000 N, with a maximum pressing force of 4,500 N for actuation. Is the clamp suitable for use in corrosive workshop environments? Yes. The clamp is zinc-plated, offering corrosion resistance suitable for general workshop and fixture use. How large is the clamping arm and how heavy is the device? The arm length is 168.5 mm and the clamp weighs 1.64 kg, which balances compact installation with robust handling. What mounting method does the clamp use? The device features an angle-base mounting (Winkelfuß), enabling flexible fitting to plates and brackets in jigs and fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamp 168.5mm Arm, Massive Holding Arm with Safety Lock, Blackened Finish - Kukamet
Take advantage of a robust combination of high holding force and a secure locking system to keep production running reliably; the compact design and angled base also simplify fixture integration. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Vertical clamp 213 – vertical toggle clamp with 5,000 N holding force by Kukamet The Vertical clamp 213 is a vertical toggle clamp designed for secure workpiece fixation in jigs, fixtures and small-series production environments Robust holding arm with safety lock Max holding force 5,000 N for secure fixation Black oxide finish for corrosion resistance Angled base for stable mounting Consistent clamping power for machining setups The clamp delivers dependable holding force values—5,000 N maximum holding force and up to 4,500 N clamping/pressing force—ensuring repeatable fixation for machining and assembly tasks. The elongated 168.5 mm arm provides reach into fixtures where a short lever would be inconvenient, enabling firm contact without repeated adjustments. These measurable performance figures support process stability and reduce setup time in batch production, translating technical capacity directly into increased operational efficiency. Secure installation and protected operation Equipped with a safety locking mechanism and mounted on an angled base, the clamp prevents accidental release during handling and machining. The locking device secures the lever in the closed position, reducing the risk of sudden unclamping under vibration. The angled base simplifies alignment on vertical or inclined fixture plates and helps distribute forces into the workholding structure, lowering the likelihood of movement or slippage during operations. This combination improves operator confidence and reduces rework. Compact, resilient design for daily workshop use The unit combines a robust holding arm with a black oxide finish that adds corrosion resistance without bulk. Weighing 1.64 kg, the clamp is compact enough for modular jig systems yet substantial enough to withstand regular use. The solid construction and finish decrease the need for frequent replacement, supporting a long service life in standard workshop environments. The design balances durability and manageable dimensions to suit both production lines and maintenance benches. Contact Metav Werkzeuge for tailored integration advice on the Kukamet vertical clamp 213 and to request technical support or a quotation from our Emmerich-based specialists. Technical Data Article number: B213-5-D-L-C2 Manufacturer: Kukamet Category: Clamps Weight: 1.64 kg Performance Data Max holding force: 5,000 N Max clamping/pressing force: 4,500 N Arm length: 168.5 mm Features & Materials Mounting: angled base Finish: black oxide finish (schwarz brüniert) Robust holding arm (massiver Haltearm) Safety locking mechanism (Sicherheitsverriegelung) FAQ What materials can this clamp be used with? The Vertical clamp 213 is a mechanical clamping element suitable for use with a wide range of workpieces in jigs and fixtures; material compatibility depends on the fixture design rather than the clamp itself. How is the clamp fixed to a fixture plate? Mounting is via the angled base; the base is designed for secure bolting to plates or brackets and aids in aligning the clamp for vertical applications. How does the safety locking mechanism work? The integrated safety lock secures the lever in the closed position to prevent accidental opening during machining; the mechanism is mechanical and designed for industrial duty cycles. Is the clamp suitable for high-vibration environments? Yes. The combination of the robust holding arm and the safety locking mechanism reduces the risk of slippage under vibration, making it appropriate for many production settings. What is the article number for ordering or spare parts? The SKU for ordering is B213-5-D-L-C2; use this identifier when referring to the Kukamet vertical clamp model 213 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamp 218.5mm Massive Arm, Safety Lock, Zinc-Plated – Kukamet
The combination of a galvanised finish, a massive holding arm with safety lock and a reliable 4,500 N clamping force ensures robust, repeatable workholding in production environments; order the 213 vertical clamp directly via Metav Werkzeuge or consult our technical advisors for application guidance. 213 vertical clamp by Kukamet — galvanised, 4,500 N clamping force A galvanised 213 vertical clamp with an angle base, designed for secure workholding and fast set-up in workshop and light industrial production. Galvanised construction Massive holding arm with safety lock Clamping force 4,500 N Arm length 218.5 mm Secure retention that reduces rework and downtime The 213 vertical clamp delivers consistent retention by combining a high clamping force of 4,500 N with a holding force rated at 5,000 N. In practical terms, the clamping force denotes the active force applied during actuation, while the holding force indicates the static resistance to part movement once locked. This distinction matters on production lines where vibration or machining forces can cause movement; the result is fewer rejects and lower rework rates. The galvanised body contributes to long-term dimensional stability under typical workshop conditions, maintaining repeatable performance over many cycles. Fast mounting and precise positioning for series work Mounted on an angle base, the clamp is optimised for quick installation to jigs, plates or fixtures when a vertical hold is required. The massive holding arm with safety lock provides a clear mechanical engagement that secures components immediately after actuation, enabling reliable indexing and uncomplicated cycle integration. With an arm length of 218.5 mm and a compact overall mass of 1.64 kg, the unit balances reach and rigidity without occupying excessive fixture space. These attributes make the clamp suitable for repetitive tasks where quick set-up and repeatability are priorities. Durable finish and low-maintenance operation The galvanised surface finish offers effective corrosion protection in workshop environments, reducing the need for frequent surface maintenance and extending service intervals. The simple mechanical design minimises wearing parts, and the visible safety latch provides clear confirmation of locked status during handling and inspection. As a workshop-ready clamping element, the device supports a compact fixture layout while preserving operator safety and component integrity through secure mechanical locking. Choose the Kukamet 213 vertical clamp for dependable workshop clamping and contact Metav Werkzeuge for procurement or technical advice: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical data Article number: 213-5-D-L-C3 GTIN: 8680731502169 EClass: 21041717 ETIM: EC011973 Core data Weight: 1.64 kg Arm length: 218.5 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Special features Material: Galvanised Mounting: Angle base Special: Massive holding arm and safety lock FAQ What maximum clamping force does the clamp provide? The Kukamet 213 vertical clamp provides a maximum clamping force of 4,500 N and a holding force of 5,000 N. Can the clamp be mounted on a fixture plate or jig? Yes, the unit is designed for an angle base mounting and can be secured to fixture plates or jigs for vertical workholding. What are the arm length and the unit weight? The clamp has an arm length of 218.5 mm and a weight of 1.64 kg, balancing reach with compact handling. Does the device include a safety mechanism? The design incorporates a massive holding arm with an integrated safety lock to secure the clamping position mechanically. What finish does the clamp have and what are the benefits? The clamp is galvanised, offering corrosion resistance and reduced maintenance for workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamp With Safety Lock, Horizontal Foot, Blackened Finish - Kukamet
Take advantage of the combination of secure locking, compact design and measurable clamping performance to keep production processes steady and repeatable. The robust vertical clamp delivers 4.5 kN clamping force with a 5.0 kN holding force, mounted via a horizontal foot for straightforward integration. Order the clamp directly via Metav Werkzeuge or consult the advisers for technical clarification. 211 Vertical clamp by Kukamet — 4.5 kN clamping force, safety lock 211 is a vertical clamping device for secure workholding in production and workshop applications, featuring a horizontal foot and an integrated safety lock. 4.5 kN clamping force 5.0 kN holding force Horizontal foot mounting Safety lock for secure clamping Consistent, measurable clamping performance for serial work The vertical clamping solution provides a defined clamping force of 4,500 N and a holding force of 5,000 N, offering reproducible results in repetitive operations. The drive uses an M12x80 pressure spindle, enabling controlled force transmission and simple read-across for process planning. These measurable values support process stability and help to compare fixture options objectively, reducing downtime caused by uncertain clamping behaviour. Compact mounting and durable surface for tight spaces Designed for space-conscious setups, the clamping unit mounts on a horizontal foot, allowing low-profile attachment to plates and jig bases. With a mass of 1.54 kg and a blackened finish, the clamp combines low weight with a protective surface treatment that is industry-typical for workshop equipment. The integrated safety lock secures the lever position during machining, preventing unintentional release and contributing to workplace safety without additional auxiliary parts. Practical integration and clear maintenance demands The lever-style mechanism suits frequent manual actuation in production cells and assembly benches; the compact form factor eases placement within multi-clamp fixtures. Basic maintenance consists of inspection of the spindle and locking mechanism; the M12x80 pressure spindle can be referenced directly when sourcing spare parts. For teams managing fixture layouts, the clamp’s clear technical metrics simplify load calculations and fixture design choices while supporting efficient workflows. Contact Metav Werkzeuge to arrange supply or a technical consultation on fitting the Kukamet 211 vertical clamp into existing jigs and fixtures Technical data Article number: B211-5-L GTIN: 8680731507805 Model: 211 Facts Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.54 kg Pressure spindle: M12x80 Special features Horizontal foot mounting Safety lock Blackened finish Vertical clamp / lever clamp design FAQ What clamping and holding forces does this clamp provide? The Kukamet vertical clamp delivers a clamping force of 4,500 N and a holding force of 5,000 N as stated for the model B211-5-L. How is the clamp mounted to a fixture or jig? Mounting is via a horizontal foot; the design allows low-profile attachment to plates and jig bases for compact fixture layouts. Is a safety mechanism included to prevent accidental release? Yes, the unit features an integrated safety lock that secures the lever position during machining and handling. What spindle specification should be referenced for spare parts? The clamp uses an M12x80 pressure spindle; this designation is suitable when ordering spares or planning maintenance. Is the surface treatment suitable for workshop environments? The clamp is supplied with a blackened finish that provides a durable surface typical for workshop equipment and handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamping Toggle Clamp Horizontal Base Zinc-Plated, 4500N Thrust - Kukamet
Take advantage of a durable galvanised construction combined with precise clamping performance — 5,000 N holding force and 4,500 N pressing force ensure secure workholding while the compact 1.54 kg body keeps fixture loads low. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 211 vertical clamp (Vertical toggle clamp) by Kukamet — galvanised, horizontal base 211 vertical clamp is a vertical toggle clamp designed for secure, repeatable workholding in fixtures and jigs where a horizontal mounting foot is required. Galvanised steel finish for corrosion resistance Holding force up to 5,000 N Actuating spindle M12x80 for adjustable pressure Compact weight 1.54 kg for easy integration Built to endure: corrosion protection and compact construction The galvanised finish provides reliable corrosion resistance, reducing maintenance and extending service life in workshop environments. With a compact weight of 1.54 kg, the unit minimises added mass on tooling plates and pallets, supporting agile fixture design and easier handling during setup. The robust zinc coating is suited to general industrial conditions, delivering longevity without complex upkeep and ensuring sustained performance on the shop floor. Precise, measurable clamping for safe production cycles A clearly defined holding force of 5,000 N and maximum pressing force of 4,500 N give quantifiable assurance when securing components during machining or assembly. The adjustable M12x80 actuating spindle enables fine tuning of contact pressure, allowing the clamp to be set for delicate parts or heavier workpieces as required. These numeric specifications support process planning and risk assessment by translating clamping performance into verifiable data for repeatable production. Simple mounting and integration for flexible fixtures The horizontal mounting foot simplifies retrofitting into existing jigs and fixture plates, reducing downtime when replacing or upgrading clamps. Designed as a toggle clamp, the mechanism offers a compact footprint and reliable repeatability for batch runs and single-piece flow alike. Its straightforward geometry accommodates standard fixture hole patterns and leaves room for parallel tooling; accessories are not required for basic installation, and the unit’s neutral design fits diverse applications from assembly to light machining. For personalised advice on integrating the 211 vertical clamp into production fixtures, contact Metav Werkzeuge in Emmerich — technical guidance and order handling are available by phone or e‑mail. Technical data SKU: 211-5 GTIN: 8680731501391 Model designation: 211 Manufacturer: Kukamet Facts Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Weight: 1.54 kg Actuating spindle: M12x80 Special features Material: galvanised steel Mounting type: horizontal base Arm: not applicable Category: toggle clamp (vertical) FAQ What clamping forces can be expected from this clamp? The 211 vertical clamp provides a maximum pressing force of 4,500 N and a holding force of 5,000 N, offering measurable values for planning secure workholding. Is the spindle adjustable and what are its dimensions? Yes — the actuating spindle is M12x80, enabling adjustment of contact pressure to suit different workpiece requirements. Can this clamp be mounted on standard fixture plates? The clamp uses a horizontal mounting foot, making it compatible with typical fixture plate hole patterns and allowing straightforward retrofitting. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
500mm Chuck Three-Point, 1000 rpm, Accuracy 0.03mm - Vertex
Take advantage of the combination of large-diameter capacity, reliable repeatability and substantial mass for vibration damping to keep production steady. Order the clamping chuck directly via Metav Werkzeuge or consult our specialists if further technical details are required. Clamping chuck VSK-20 — 500 mm diameter, 0.03 mm repeatability (Vertex) Clamping chuck VSK-20 is a heavy‑duty clamping unit designed for large workpieces in machining centres and heavy lathes, offering precise axial repeatability at controlled spindle speeds. 500 mm nominal diameter Repeatability 0.03 mm Rated speed 1,000 rpm Mass 145.5 kg for stable clamping Precise positioning for large components The 500 mm nominal diameter combined with a repeatability of 0.03 mm ensures consistent positioning of sizeable workpieces, which reduces setup deviation and rework. In practice, repeatability refers to the chuck’s ability to return a clamped part to the same position after remounting; this metric is essential when batches require interchangeability or when off‑line inspection relies on reproducible clamping. The robust design and measurable accuracy support tight tolerance processes, helping maintain downstream quality and throughput. Stable operation and reduced vibration at machining speed A rated spindle capability of 1,000 rpm together with a mass of 145.5 kg delivers inherent damping and rotational stability, which lowers chatter risk during roughing and semi‑finishing. The clamping unit’s inertia contributes to smoother cuts and a better surface finish on demanding materials. For production planning, the controlled speed rating clarifies the operational envelope; pairing the chuck with appropriately balanced workpieces and matched tooling minimises imbalance and maximises machining efficiency. Reliable supply and integration into workshop workflows Produced by Vertex and identified as VSK-20, this clamping chuck integrates into heavy machining setups where large diameters and repeatable accuracy are required. Metav Werkzeuge acts as the supplier and quality filter for the European market, offering decades of expertise and a broad product range that simplifies procurement. The unit’s clear technical parameters ease specification checks during machine integration and procurement decisions, while traceable identifiers support asset management and ordering processes. For secure, high‑capacity clamping choose the Vertex VSK-20 — contact Metav Werkzeuge in Emmerich for purchase guidance or to request matching accessories via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VSK-20 GTIN: 4061905096105 eClass: 21020590 Facts Diameter: 500 mm Repeatability / accuracy: 0.03 mm Rated speed: 1,000 rpm Mass: 145.5 kg Special features Manufacturer: Vertex Image file: VSK-4-main.png FAQ How accurate is the clamping when remounting components? The clamping chuck VSK-20 delivers a repeatability of 0.03 mm, which defines its capacity to return a remounted workpiece to the same axial position for consistent batch quality. What maximum rotational speed is suitable for this chuck? The unit is specified for operation up to 1,000 rpm, aligning the clamping performance with stable, heavy‑workpiece machining. Is the VSK-20 suitable for large turning centres? Yes, the VSK-20 is designed for large workpieces and heavy‑duty lathes or machining centres where a 500 mm nominal diameter and substantial mass support stable clamping. How does the chuck’s mass affect machining results? A mass of 145.5 kg increases rotational inertia and damping, reducing vibration and supporting improved surface finish and tool life during heavy cutting operations. What identifiers are useful when ordering spare parts or matching fixtures? Use the SKU VSK-20 and GTIN 4061905096105 for precise ordering and component matching. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500mm Fork Clamp Bar Slot B26mm For M24 Screw DIN 6315B - AMF
Benefit from a fork-style clamping bar built to DIN 6315B with a 26 mm slot and 500 mm overall length for secure M24 screw clamping and stable setups; this configuration streamlines fixture preparation and improves repeatability on the workshop floor. Order the clamping bar directly via Metav Werkzeuge or consult our advisors for specification support. Fork-style clamping bar (Gabelspanneisen) DIN 6315B — 26 mm slot, 500 mm — AMF The Fork-style clamping bar DIN 6315B is a precision clamping accessory designed for robust fixturing and long-reach applications, intended for use with an M24 clamping screw. Fork-style design for secure clamping DIN 6315B standardised compatibility 26 mm slot width for M24 clamping screw 500 mm overall length for long reach Faster setups through standardised compatibility Compliance with DIN 6315B ensures straightforward integration into existing fixturing systems, reducing the time spent selecting compatible parts. The 26 mm slot is sized for an M24 clamping screw, which simplifies procurement and lowers the risk of mismatched components. For production environments where quick changeovers and consistent alignment matter, the standardised interface delivers reduced setup time and repeatable positioning without the need to alter fixture geometry. Secure, repeatable clamping with extended reach The fork-style configuration concentrates clamping forces at two prongs, improving stability under load while maintaining accessibility to the workpiece. With a 500 mm overall length the bar provides long reach for larger or awkwardly placed components, enabling clamping closer to the machining area and reducing the need for secondary supports. The result is improved precision during operations that demand consistent contact pressure and minimal movement. Practical workshop integration and inventory benefits Supplied in a single packing unit, the bar is suited to standard clamping setups and simplifies inventory management for maintenance and production departments. The plain, standardised design supports modular fixturing concepts, allowing quick pairing with commonly used clamping screws and fixtures. By choosing components that match established norms, workshop planners achieve smoother ordering, fewer downtime risks and a leaner supplier landscape. For assured DIN 6315B compatibility and reliable delivery, contact Metav Werkzeuge to specify and proc ure the AMF fork-style clamping bar — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and order processing. Technical data Article number: 4000603053NW Type: Fork version (Gabelausführung) Standard: DIN 6315B Product type: Clamping bar (Spanneisen) Brand: AMF Facts Slot width: 26 mm Overall length: 500 mm Suitable for: M24 clamping screw Packaging unit: 1 Special features Fork-style execution Slot for 26 mm clamp Axial enrichment: A: 50; B2: 66; B3: 20; B4: 10 DIN 6315B compatible FAQ What does the DIN 6315B designation mean for this clamping bar? DIN 6315B denotes the standardised interface and dimensions that the fork-style clamping bar (Spanneisen) 4000603053NW by AMF adheres to, ensuring compatibility with fixtures manufactured to the same specification. Which clamping screw size fits this fork-style clamping bar? The fork-style clamping bar is designed for an M24 clamping screw, matching the 26 mm slot profile to provide a secure connection. How does the 500 mm length affect workshop applications? The 500 mm overall length offers extended reach for larger workpieces, allowing clamping closer to the machining area and reducing the need for additional supports when using the AMF clamping bar. Is the fork-style clamping bar suitable for modular fixturing systems? Yes, the standardised DIN 6315B interface and common M24 compatibility make this bar well suited to modular fixturing concepts and standard workshop toolsets. What is included in the delivery for SKU 4000603053NW? Delivery consists of the clamping bar as a single unit (packaging unit: 1); additional clamping screws or fixture components are not included unless specified separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Fork Jaw Clamp DIN 6315B 22mm Slot For M20/M22 Screw - AMF
Take advantage of the fork‑type design, the 22 mm slot and the 500 mm overall length for stable, standardised clamping in fixture systems; order the component directly via Metav Werkzeuge or consult the Metav team for tailored selection and application advice. AMF Fork Clamping Bar DIN 6315B — Fork‑type clamping bar with 22 mm slot, 500 mm length The AMF Fork Clamping Bar DIN 6315B is a fork‑type clamping component for fixture and bench systems, designed to accept standard M20 and M22 clamping screws and to integrate with DIN‑compliant tooling. Fork‑type design for secure clamping 22 mm slot for standard mounting 500 mm overall length for extended reach Reliable clamping for precision fixtures The fork‑type geometry, specified to DIN 6315B, ensures a predictable engagement with clamping hardware and a secure clamping interface. The 22 mm slot provides a standard contact area that aligns with common fixture bars, enabling consistent force transfer when paired with M20 or M22 clamping screws. This standardisation reduces variability in repetitive setups and supports stable machining or assembly processes without the need for custom adapters. Fast integration with standard screw systems A 500 mm overall length combines reach with stable leverage, allowing integration across longer jaws and multiple clamping points. The length supports flexible positioning within a clamping layout and reduces the number of separate components required for extended fixtures. Compatibility with M20 and M22 thread sizes simplifies procurement and spare‑part management, contributing to reduced setup time and smoother changeovers between jobs. Practical workshop benefits and traceability Specification conformity and a clear SKU facilitate stock control and traceability in production environments. The clamping bar is listed under SKU 4000603051NW, supplied as a single unit, and marked for use in standardised systems. The fork execution offers a reliable mechanical interface for recurring fixturing tasks, supporting efficient workflows and predictable maintenance cycles while easing parts management in the workshop. For selection assistance or to secure this AMF fork clamping bar for specific fixtures, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 and request guidance from the Metav consultants. Technical data SKU: 4000603051NW Product type: Clamping bar (fork design) Standard: DIN 6315B Dimensions & compatibility Slot width: 22 mm Overall length: 500 mm Compatible with clamping screws: M20, M22 Features & applications Product category: Clamping bar Packaging unit: 1 Manufacturer: AMF FAQ What thread sizes are compatible with this clamping bar? The AMF fork clamping bar is compatible with M20 and M22 clamping screws, as stated in the technical specification. Does the bar conform to an industry standard? Yes, conformity to DIN 6315B is specified, which ensures interchangeability with other components designed to the same standard. What is the overall length and how does it affect fixturing? The overall length is 500 mm, providing extended reach for larger jaws or multiple clamping positions in a fixture layout. Can the SKU be used for stock and reorder purposes? SKU 4000603051NW is provided for ordering and inventory management to ensure correct identification and traceability. How is the product delivered in terms of packaging? The item is supplied as a single unit, with a packaging unit of 1 for straightforward handling and storage. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Independent Four-Jaw Chuck With 4-M20 T-Slots, 350 rpm - Vertex
Take advantage of precise, independent clamping combined with a large 500 mm diameter and durable 105 kg construction for steady turning of irregular and heavy workpieces. Order the chuck directly via Metav Werkzeuge or consult the Metav team for specification support and supply from Emmerich. VKC-20 four-jaw independent chuck, 500 mm, Vertex The VKC-20 is a four-jaw independent chuck designed for secure clamping of irregular and heavy workpieces in medium-speed turning applications Independent four-jaw clamping for irregular parts 500 mm diameter for large workpieces Rated speed 350 r.p.m. for medium-speed turning 105 kg robust build with 4 M20 T-nuts Secure, flexible clamping for irregular components Independent jaw operation allows each jaw to be set individually, making the chuck especially suited to non-cylindrical or off-centre components. The four-jaw independent chuck design delivers stable seating and improved access to workpiece faces, which reduces the need for subsequent rework. For production scenarios where part geometry varies, this flexibility shortens setup time and supports consistent process flow while maintaining grip force where it is needed. Performance under load with controlled rotational speed With a rated speed of 350 r.p.m., the chuck balances rotational stability and cutting performance for a wide range of turning tasks. The combination of considerable clamping surface and moderate permitted speed helps to keep vibration low and surface finish high, particularly on large-diameter jobs. Emphasis on repeatability ensures that once a clamp setting is established, multiple successive parts retain the same reference relationship, aiding both quality control and throughput. Heavy-duty construction and secure mounting The substantial 105 kg mass of the unit, paired with a compact mounting pattern using 4 M20 T-nuts, contributes to mechanical rigidity and reliable attachment to the lathe face. A heavier chuck reduces susceptibility to deflection when machining robust workpieces, improving dimensional accuracy and tool life. The T-nut arrangement supports a secure bolted connection to the machine spindle or adaptor plate, simplifying integration into existing setups without compromise on stability. Suitable applications and the Metav advantage The chuck is appropriate for repair shops, jobbing lathes and light production lines where large, irregular or heavy workpieces are common. The design supports turning of varied geometries and materials where fixed three-jaw solutions are insufficient. Metav stands for the democratisation of precision: the distribution from Emmerich functions as a quality filter for the European market, combining technical expertise and logistics to supply reliable metrology and workshop equipment to industry and trade. Arrange supply and technical consultation through Metav Werkzeuge for tailored specification and rapid fulfilment from Emmerich – Metav’s advisors can confirm compatibility with the intended machine and process. Technical data Article number: VKC-20 GTIN: 4061905086335 Brand: Vertex Facts Diameter: 500 mm Maximum speed: 350 r.p.m. Weight: 105 kg Special features Four-jaw independent design T-nuts: 4-M20 Category: Vertex FAQ What is the chuck diameter? The VKC-20 four-jaw independent chuck is specified with a 500 mm diameter for handling large workpieces. What rotational speed is permitted? The VKC-20 is rated to operate at 350 r.p.m., suitable for medium-speed turning tasks. How is the chuck mounted to the lathe? Mounting is effected using the supplied 4-M20 T-nut pattern for a secure bolted connection to the machine face. Which workpieces are best suited to this chuck? The VKC-20 is intended for irregular, heavy or large components where independent jaw adjustment improves clamping and process stability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500mm Stud Bolt M16 Forged 8.8 Heat Treated DIN 6379 - AMF
Take advantage of a robust combination of recognised standard compliance and high tensile strength for dependable, repeatable jointing in production and maintenance environments; secure supply and technical advice via Metav Werkzeuge for streamlined procurement and reliable delivery. AMF stud bolt (DIN 6379) — M16 x 500 mm, property class 8.8 A AMF stud bolt (DIN 6379) designed for load-bearing threaded connections in machinery, structural assemblies and mechanical engineering applications. DIN 6379 standard compliant stud bolt Property class 8.8, heat treated for strength M16 thread, 500 mm total length Hexagon width 19 mm for standard tools High-strength fastening for industrial assemblies The DIN 6379 conformity signals a production and inspection regime aligned with industrial expectations, while the 8.8 property class denotes a heat treated carbon steel fastener engineered for elevated tensile and yield performance. As a stud bolt, this component provides axially reliable clamping where bolt-and-nut connections are required; fatigue resistance is improved by the tempering process, which translates into longer service intervals and fewer unscheduled maintenance stops. Traceable manufacturing and consistent mechanical properties reduce assembly variability and support predictable safety margins in static and semi-dynamic loads. Precise dimensions for predictable installation Featuring an M16 metric thread and a 500 mm total length, the component is specified for applications demanding significant grip length or through-bolt arrangements. The hexagon 19 mm across flats ensures compatibility with common spanners and torque tools, enabling controlled tightening with standard industrial equipment. Clear dimensional conformity simplifies parts matching with existing assemblies and minimises rework; where accurate clamp length and thread engagement are critical, the defined geometry assists in achieving the required preload without guesswork. Suitable uses and procurement reliability for workshops Manufactured for durable mechanical joints, this stud is suitable for heavy machinery, plant construction and maintenance tasks that require secure threaded connections under load. The single-piece supply format supports just-in-time replacement of worn studs or targeted spares stocking. Procurement through an experienced distributor ensures quality filtering and logistical reliability: Metav provides centralised access to precision components and can assist in part selection for compatibility with existing assemblies and standards. Reliable sourcing reduces the risk of mismatched components and supports uninterrupted production. For secure, high-strength assemblies specify the AMF stud bolt (DIN 6379, M16 x 500 mm) and contact Metav Werkzeuge in Emmerich for technical clarification and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000603418NW Standard: DIN 6379 Designation: Stud bolt M16 x 500 mm Brand: AMF Facts Thread: M16 Total length: 500 mm Width across flats: 19 mm Property class: 8.8 Special features Heat treated to property class 8.8 Suitable for load-bearing threaded joints Packaging unit: 1 Addition: b: 315 FAQ Is this stud suitable for structural applications? Yes. The stud complies with DIN 6379 and the 8.8 property class, making the AMF stud bolt appropriate for many structural and mechanical fastening tasks where defined mechanical properties are required. What material treatment does the stud have? The component is heat treated to achieve property class 8.8, providing improved tensile strength and yield compared with untreated fasteners. Which tools are required for installation? Standard spanners or sockets matching the 19 mm hexagon across flats and standard torque equipment for an M16 thread are suitable for installation of this stud bolt. Is the stud corrosion-resistant for outdoor use? No specific corrosion protection is specified. For corrosive or outdoor environments, additional surface treatment or a corrosion-resistant alternative should be considered. What is the packaging unit and SKU for ordering? The packaging unit is 1 and the article number / SKU is 4000603418NW for ordering and stock identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Stud Bolt M20 Heat-Treated 8.8 DIN 6379 - AMF
Take advantage of a DIN 6379 specification and grade 8.8 tempering for dependable load-bearing performance in long-reach connections; the M20 thread and 500 mm length reduce the need for adapters and speed assembly. Order the stud bolt directly via Metav Werkzeuge or ask our consultants if needed. Stiftschraube DIN6379 M20x500mm, tempered to 8.8 — AMF stud bolt for heavy-duty fastening Stiftschraube DIN6379 M20x500mm vergütet auf 8.8 AMF is a long M20 stud bolt designed for secure mechanical joins and through-bolting in structural and machine-building applications. DIN 6379 conformity High-strength grade 8.8 tempering M20 thread for heavy-duty fastening 500 mm overall length Predictable assembly with standard compliance Conformity to DIN 6379 guarantees dimensional interchangeability and consistent thread geometry, which simplifies procurement and replacement planning. For production lines and maintenance workshops, a standardised fastener reduces measurement effort and tolerance checks; the clear reference to the norm also aids documentation and quality control. The certified specification contributes to reliable joint behaviour under dynamic load and supports traceability across components. Strength and safety from grade 8.8 tempering Tempering to grade 8.8 provides improved tensile and yield properties compared with general-purpose fasteners, resulting in a more secure clamped joint and lower risk of deformation in service. This fastener's heat treatment enhances fatigue resistance for cyclic loads in rotating or vibrating equipment. For engineers and buyers, the benefit is fewer unscheduled maintenance stops and extended service intervals owing to the improved mechanical performance. Long reach design reduces installation complexity With an overall length of 500 mm, the stud bolt is suitable for deep or sandwich-type assemblies where through-bolting is required. The extended length eliminates the need for multiple components or extensions, streamlining inventory and minimising assembly steps. The M20 thread dimension is a common size in heavy machinery, ensuring compatibility with standard nuts and washers and easing integration into existing assemblies. Manufactured for consistency and reliable supply Produced under the AMF label, the fastener is made to the declared standard and labelled for clear identification. Sourcing through Metav provides an additional quality filter and logistical reliability from the Emmerich location, which is particularly valuable for industrial users who require consistent replenishment. The combination of defined manufacturing practice and dependable delivery reduces administrative overhead and supports uninterrupted production. Practical benefits for procurement and maintenance Specifying this stud bolt simplifies purchasing lists and maintenance kits: the clear designation, known thread size and tempering class enable straightforward selection and stock control. Maintenance technicians and assembly planners benefit from fewer part variants and direct compatibility with common tightening tools and torque tables. Where traceability matters, the SKU and labelling help link installed parts to batch records. For robust, standard-compliant fastening choose the AMF M20×500 stud bolt and contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833289NW SKU: 4000833289NW UID: 4000833289NW Manufacturer: AMF Product type: Stud bolt Dimensions / core data Thread: M20 Overall length: 500 mm Width: 27 mm Standard: DIN 6379 Materials & special features Tempered to grade 8.8 Label: Stiftschraube DIN6379 M20x500mm vergütet auf 8.8 AMF Packaging unit: 1 Addition: b: 315 FAQ What standards does this stud bolt meet? This stud bolt complies with DIN 6379, ensuring standard thread form and dimensions for reliable interchangeability. Is the fastener suitable for heavy-duty applications? Yes; the component is tempered to grade 8.8, providing enhanced tensile properties suitable for demanding machine and structural connections. What are the key dimensions to check for fit? Confirm the M20 thread and the 500 mm overall length to ensure compatibility with the intended assembly and available nuts or tapped holes. Can the stud bolt be used with standard M20 nuts and washers? The fastener uses a standard M20 thread form, so it pairs with common M20 nuts and washers specified for the application’s load class. How is the product identified for reordering? Use the SKU 4000833289NW and the AMF labelling on the product for accurate reordering and batch traceability. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x220mm Chamfering And Deburring Machine With 45° Angle, Same Surface For Chamfering And Drilling, 3Ø/1Ø Voltage - Vertex
Reliable 45° edge preparation and consistent surface finish result from the 3,500 r.p.m. spindle and the included SEKN 1203 indexable insert; benefit from precise chamfering and low downtime—order directly via Metav Werkzeuge or consult our specialists for installation and voltage configuration. VCF-500F Chamfering and Deburring Machine — 45° Chamfer, 3,500 r.p.m. (Vertex) The VCF-500F is a chamfering and deburring machine engineered for precise 45° edge preparation, delivering uniform surface quality for both deburring and subsequent drilling tasks in workshops and light production environments. 45° chamfer angle for consistent edge preparation 3,500 r.p.m. spindle speed for efficient processing Includes SEKN 1203 indexable milling insert Flexible supply voltage options for varied installations High-performance edge finishing that reduces rework The VCF-500F combines a 45° chamfer with a high-speed spindle running at 3,500 r.p.m. to produce repeatable, clean edges that reduce manual rework and downstream correction. The controlled cutting geometry and stable spindle speed enable predictable material removal, which supports efficient cycle times on repetitive tasks. Emphasis on process reliability makes this chamfering unit suitable for small-series production and workshop tasks where consistent edge quality is required. Compact footprint and flexible electrical connection for easy integration With compact nominal dimensions of 500 x 220 mm and a mass of 29 kg, the unit is straightforward to position on a benchtop or integration frame. Electrical compatibility is broad: available for 1Ø 110V/220V (50/60 Hz) and 3Ø 220V / 380V / 415V systems, permitting installation where either single-phase or three-phase supplies are present. This flexibility minimises additional site work and simplifies commissioning in diverse industrial environments. Ready-to-use tooling and maintenance benefits The machine is delivered with an SEKN 1203 indexable milling insert, providing immediate cutting capability and a predictable wear profile. Indexable inserts reduce downtime compared with solid tooling because corners can be indexed rather than replaced entirely. Routine maintenance is simplified by the insert system and the accessible toolholder arrangement, so operational availability is maximised and consumable changes remain quick and safe. Consistent surface quality for combined deburring and drilling workflows A key advantage of this chamfering and deburring solution is the same surface quality achieved for both deburring and drilling operations. Producing a uniform finish at the edge improves hole preparation and supports subsequent machining steps. The machine’s function is therefore well suited to workflows where edge condition directly affects hole quality or assembly fit, helping to secure consistent outcomes across batches. For precise 45° edge preparation with Vertex reliability, contact Metav Werkzeuge for tailored advice on installation and supply options—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VCF-500F and integration requirements Technical Data Article number: VCF-500F GTIN: 4061905090172 eClass: 36639025 Manufacturer: Vertex Facts Dimensions: 500 x 220 mm Spindle speed: 3,500 r.p.m. Weight: 29 kg Chamfer angle: 45° Supply voltage: 1Ø 110V/220V 50Hz/60Hz; 3Ø 220V; 3Ø 380V/415V Special features Includes SEKN 1203 indexable milling insert Same surface quality for deburring and drilling Chamfering and deburring function suitable for workshop and light production FAQ What electrical connections are supported by the machine? The VCF-500F supports multiple supply options; it is configurable for 1Ø 110V/220V (50/60 Hz) and 3Ø 220V / 380V / 415V, allowing installation in sites with single-phase or three-phase power. Is a cutting tool included with delivery? Yes, delivery includes an SEKN 1203 indexable milling insert, providing immediate cutting capability and straightforward insert replacement. What chamfer angle does the unit produce? The machine produces a 45° chamfer, optimised for consistent edge preparation and improved compatibility with subsequent drilling operations. How large is the footprint and how heavy is the unit? Nominal dimensions are 500 x 220 mm, with a weight of 29 kg, making the unit compact enough for benchtop use or simple integration into existing workstations. Can this machine improve drilling results after deburring? Yes, the VCF-500F is designed to deliver the same surface quality for deburring and drilling, which supports better hole preparation and reduces the need for secondary finishing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500x320mm Chamfering And Deburring Machine With Replaceable Carbide Inserts, 3500r.p.m. - Vertex
Built for accurate edge finishing, the VCF-500 pairs replaceable carbide inserts with a high-speed spindle to deliver fast, consistent chamfering and deburring — ideal for busy workshops. Order the Vertex VCF-500 via Metav Werkzeuge or consult Metav’s specialists for tailored delivery and technical advice. VCF-500 — Vertex chamfering and deburring machine, 3,500 r.p.m. The VCF-500 is a compact chamfering and deburring machine designed for workshop and light-production environments, delivering repeatable edge preparation with minimal setup time Replaceable carbide inserts for long life 3,500 r.p.m. spindle speed for fast processing Compact footprint: 500 x 320 mm Incl. side indexable milling plate SPUN 422 Rapid, consistent edge preparation to speed workflows The machine’s combination of a high-speed spindle and replaceable carbide inserts delivers a reliable process for edge finishing. With a rated speed of 3,500 r.p.m., the unit reduces cycle times while maintaining a consistent finish across batches. This translates into measurable productivity gains on repeated chamfering tasks, helping to optimise throughput without complex adjustments. Operators with limited metrology experience benefit from predictable results and fewer reworks. Small footprint, robust build for workshop environments With a compact footprint of 500 x 320 mm and a net mass of 28.5 kg, the machine fits neatly onto standard workbenches or production islands. The relatively low weight supports flexible placement and straightforward integration into existing workflows, while the robust construction ensures vibration damping for steady results. These characteristics support efficient shop-floor layout and make the unit suitable for both manual and semi-automated production cells. Practical accessories and flexible power supply for diverse shops The VCF-500 includes a side indexable milling plate SPUN 422, enabling immediate use for common deburring and chamfering tasks. Multiple supply options — single‑phase and three‑phase voltages — provide installation flexibility: 3Ø 220V or 1Ø 110V/220V 50Hz/60Hz and 3Ø 380V/415V. This adaptability simplifies integration into different electrical environments and reduces downtime during commissioning, while the accessory package supports fast changeovers between operations. Wide applicability while keeping operation straightforward Designed primarily for edge finishing tasks such as chamfering and deburring, the unit delivers a balanced mix of speed and control that suits maintenance shops, toolrooms and small batch production. Maintenance focuses on periodic insert changes rather than complex overhauls, keeping lifecycle costs predictable. Clear mechanical adjustments and visible tooling choices reduce setup errors and help maintain consistent part quality across runs. For reliable, high‑throughput chamfering select the Vertex VCF-500 and contact Metav Werkzeuge for personalised delivery and technical guidance from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCF-500 GTIN: 4061905083129 Designation: Anfas- und Entgratmaschine Core specifications Dimensions: 500 x 320 mm Weight: 28.5 kg Spindle speed: 3,500 r.p.m. Features and accessories Replaceable carbide inserts Incl. side indexable milling plate SPUN 422 Supply voltages: 3Ø 220V; 1Ø 110V/220V 50Hz/60Hz; 3Ø 380V/415V Brand: Vertex FAQ How fast does the machine operate? The VCF-500 runs at a spindle speed of 3,500 r.p.m., offering a balance between surface finish and processing speed for chamfering and deburring tasks. What tooling is included with the unit? The delivery includes a side indexable milling plate SPUN 422 and the machine uses replaceable carbide inserts for ongoing serviceability. Is the VCF-500 easy to integrate into different power systems? Yes. The VCF-500 accepts multiple supply options: 3Ø 220V, 1Ø 110V/220V (50Hz/60Hz) and 3Ø 380V/415V, allowing straightforward installation in varied electrical environments. Which applications suit this machine best? The unit is intended for workshop-level chamfering and deburring, making it suitable for maintenance departments, toolrooms and small-batch production where reliable edge finishing is required. How often should carbide inserts be changed? Insert life depends on material and usage intensity; however, the VCF-500’s design with replaceable carbide inserts simplifies replacement, keeping corrective downtime to a minimum. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500x350mm Angle Plate 90° With T-Slots M12, 500x500mm Top Plate, 184 kg - Vertex
Take advantage of the combination of robust stability and versatile fixturing to reduce setup time and ensure repeatable results; order the angle plate directly via Metav Werkzeuge or consult our specialists for specification support. Vertex BP22-50 90° Angle Plate with M12 T-slots A 90° angle plate with T-slots, the BP22-50 serves as a stable workholding and inspection platform for machine shops and metrology benches. Massive 184 kg mass for superior stability M12 T-slots for secure, standardised fixturing Measuring table 500 x 500 mm for larger components Base footprint 500 x 350 mm for firm mounting Stability that improves machining accuracy The BP22-50 angle plate delivers notable stability through its substantial mass of 184 kg, which reduces vibration during machining and inspection. This inherent damping supports tighter tolerances and fewer rejects by keeping the workpiece motionless relative to the cutting tool or measuring probe. In practical terms, the solid mass shortens settling times after clamping and contributes to consistent results across batch runs. The heavy construction therefore directly benefits throughput and process reliability in production environments where repeatability matters. Versatile fixturing for diverse applications Equipped with M12 T-slots, the unit allows secure and flexible attachment of clamps, locators and custom fixtures. The 500 x 500 mm measuring table provides a generous work area while the 500 x 350 mm base gives a compact footprint for mounting to milling or inspection tables. The T-slot arrangement supports standardised tooling interfaces, simplifying fixture transfers between machines and reducing set-up complexity. For users unfamiliar with T-slot nomenclature: the slots accept standard T-bolts and clamping elements, enabling rigid, repeatable clamping without specialist hardware. Designed to integrate with quality workflows As a precision workholding element, the plate minimises alignment effort and supports rapid inspection cycles when paired with gauges or microscopes. The orthogonal 90° faces are suitable for squaring and multi-axis setups, helping to reduce repositioning steps in measurement routines. By providing a dependable datum and secure clamping points, the component helps to shorten cycle times and lower rework rates — an efficiency gain that pays back across production batches. The robust platform also eases the implementation of standard operating procedures for fixture setup and quality control. Contact Metav Werkzeuge for a detailed mounting checklist and to arrange prompt delivery of the Vertex BP22-50 from our Emmerich quality hub Technical data Article number: BP22-50 GTIN: 4061905087837 Brand: Vertex Facts Weight: 184 kg Measuring table: 500 x 500 mm Base footprint: 500 x 350 mm T-slot size: M12 ECLASS: 21020601 Special features 90° orientation with T-slots Suitable for precision workholding and inspection Image available: bp22-30-main.jpg FAQ What materials can be clamped on this angle plate? The Vertex BP22-50 angle plate accepts a wide range of component materials; the plate itself provides a stable datum for clamping metals, plastics and composite parts using standard T-slot fixtures. How do the M12 T-slots benefit fixture selection? M12 T-slots on the BP22-50 enable the use of commonly available T-bolts and clamp systems, allowing straightforward fixture design and interchangeability across machines. Is the plate suitable for use on measuring tables and inspection benches? Yes, the 500 x 500 mm measuring surface and rigid construction make the BP22-50 suitable for integration with measuring tables and inspection benches where dimensional stability is essential. Does the Vertex BP22-50 require special mounting hardware? No specialised hardware is required; standard T-slot bolts and clamps compatible with M12 are sufficient for secure mounting and fixturing. Can the plate help reduce setup time in production? By providing defined datum faces and secure T-slot anchoring, the angle plate shortens alignment and clamping steps, contributing to faster, more repeatable setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500x400x320mm Chamfering and Deburring Machine for R Double Angles 3Ø/1Ø 3500rpm 1HP - Vertex
Take advantage of a compact yet powerful solution that combines consistent edge quality, a 3,500 r.p.m. spindle and flexible electrical options for seamless integration into production. Order the machine directly via Metav Werkzeuge or consult our advisors for specification support and delivery from Emmerich. VCF-500R Bevelling and Deburring Machine — 3,500 r.p.m., 1 HP (Vertex) A robust VCF-500R bevelling and deburring machine engineered for efficient processing of R double-angle components in workshop and light-production settings 3,500 r.p.m spindle speed for efficient bevelling Compact footprint 500×400×320 mm for tight shops Flexible supply 1 HP, 110–220 V or 220–400 V options Designed for R double-angle deburring and chamfering Consistent edge quality for repeatable production The machine delivers precise bevelling and deburring by maintaining a stable spindle speed at 3,500 r.p.m., which reduces variation between workpieces and shortens secondary finishing operations. For fabricators and small production lines, this translates into fewer rework cycles and more predictable output. The built-in capacity to process R double-angle profiles ensures consistent chamfer geometry, supporting quality control and repeatability across batches. Space-saving design that simplifies workflow With a compact footprint of 500 × 400 × 320 mm and a net weight of 28 kg, the unit integrates into constrained workbenches or mobile setups without extensive rearrangement. The reduced floor space requirement supports leaner workshop layouts and easier access to adjacent machinery. The relatively low mass allows relocation within the shop when production needs change, helping to optimise material flow and minimise handling time. Electrical flexibility and robust drive for varied installations Equipped with a 1 HP standard drive and configurable supply options — 110–220 V single-phase or 220–400 V three-phase at 50/60 Hz — the machine adapts to differing electrical infrastructures commonly found in trade and industrial environments. This compatibility reduces installation complexity and supports deployment at multiple sites without major electrical modifications. The reliable drive assembly is designed for continuous operation, contributing to steady cycle times. Practical operation that reduces processing steps The system focuses on practicality: its task-specific construction for chamfering and deburring of R-profile edges cuts processing steps by combining two functions in one compact unit. Operators benefit from straightforward setup and predictable results, while production planners gain from simpler process chains and lower downstream finishing requirements. The device’s specification suits workshops seeking measurable efficiency gains with limited floor space. Contact Metav Werkzeuge today for an individual specification and fast delivery from Emmerich — our consultants assist with compatibility checks and order processing for Vertex machines Technical data SKU: VCF-500R GTIN: 4061905083136 ECLASS: 36639025 Type: Bevelling and deburring machine for R double-angle Core specifications Dimensions: 500 × 400 × 320 mm Spindle speed: 3,500 r.p.m. Net weight: 28 kg Power: 1 HP (standard) Supply voltage: 110–220 V (single-phase) / 220–400 V (three-phase) Frequency: 50/60 Hz Features & suitability Brand: Vertex Application: Chamfering and deburring of R double-angle parts Ideal for workshops and light-production environments Compact, mobile-capable design FAQ What materials can be processed with this bevelling and deburring machine? The VCF-500R by Vertex is designed for general metal deburring and chamfering tasks; suitability depends on the chosen tooling and process parameters for specific alloys. Is the machine compatible with single-phase power supplies? Yes, the unit supports single-phase operation at 110–220 V as well as three-phase 220–400 V, allowing flexible installation in different electrical environments. How large is the machine and can it fit on a standard workbench? The compact footprint of 500 × 400 × 320 mm and a weight of 28 kg mean the device fits comfortably on standard benches and in constrained workshop layouts. What spindle speed does the machine use for bevelling operations? The machine operates at a spindle speed of 3,500 r.p.m., providing steady performance for consistent chamfering and deburring results. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500x440mm Chamfering And Deburring Machine With Flange For Grinding Wheel, 45° 3500rpm - Vertex
Taking advantage of consistent 45° chamfers, a robust 3,500 r.p.m. spindle and flexible supply-voltage options ensures reliable edge preparation for steel and heat‑treated parts; order the unit directly via Metav Werkzeuge or contact our consultants for project-specific advice. VCF-500W Chamfering and Deburring Machine by Vertex — 500 x 440 mm table, 3,500 r.p.m. The VCF-500W is a compact chamfering and deburring machine designed for precise edge preparation of steel components in workshop and light industrial settings. 500 x 440 mm working area 45° chamfer angle 3,500 r.p.m. spindle speed Supplied with Ø100x50xØ17 mm grinding wheel Reliable throughput with consistent chamfers The VCF-500W delivers repeatable results through its high‑speed spindle running at 3,500 r.p.m., which supports steady material removal and reduces the need for manual rework. The machine’s fixed 45° setting provides a standardised chamfer across batches, simplifying quality control and increasing throughput. By pairing a dedicated flange for the abrasive wheel with a compact work area of 500 x 440 mm, the unit enables quick set-ups and predictable cycle times for recurring tasks. These characteristics translate into measurable gains in production efficiency and less scrap. Built for tougher materials and extended service life Constructed to handle steel and heat‑treated components, this edge‑preparation unit copes with higher hardness levels that commonly challenge hand tools. Heat treatment increases material strength and wear resistance; the machine’s configuration and supplied abrasive wheel are matched to remove hardened burrs without excessive wheel wear. The result is fewer interruptions for maintenance and a longer operational life for consumables, which supports a lower total cost of ownership for routine metal‑working tasks. Workshop‑friendly power choices and compact footprint The VCF-500W adapts to varied electrical environments with multiple supply options: 3Ø 220V, 1Ø 110V/220V 50Hz/60Hz, and 3Ø 380V/415V, enabling installation in diverse facilities without costly electrical upgrades. With a weight of 29.1 kg and a reduced footprint, the machine fits benchtop layouts while maintaining stability during operation. These factors make the unit suitable for small workshops and maintenance departments that require professional chamfering capability without a large machine shop investment. Ready for immediate use and straightforward handling Delivered with a grinding wheel Ø100x50xØ17 mm mounted on a flange, the machine is prepared for rapid commissioning. The flange system ensures secure wheel attachment and facilitates replacement when consumables are due, while the bench‑mount format keeps the unit accessible for frequent tasks. For users seeking predictable edge geometry and dependable performance, the combination of included accessories and simple mechanical design reduces operational complexity and training time. For a tailored quotation or to discuss how the Vertex VCF-500W can be integrated into a production line, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for delivery from our Emmerich warehouse. Product information SKU: VCF-500W GTIN: 4061905088377 Manufacturer: Vertex Key specifications Dimensions: 500x440 mm Weight: 29.1 kg Spindle speed: 3500 r.p.m. Chamfer angle: 45° Supply voltage: 3Ø 220V or 1Ø 110V/220V 50Hz/60Hz and 3Ø 380V/415V Special features Flange for grinding wheel Supplied with grinding wheel Ø100x50xØ17 mm Suitable for steel, heat-treated components Bench-mounted chamfering and deburring function FAQ Which materials can be processed with this machine? The VCF-500W is designed for processing steel, including heat‑treated steel parts, and performs edge preparation reliably on tougher metal surfaces. What abrasive is supplied with the unit? The machine is delivered with a grinding wheel Ø100x50xØ17 mm mounted on a flange to enable immediate use for chamfering and deburring tasks. What electrical connections are supported? The VCF-500W accepts multiple supply voltages: 3Ø 220V; 1Ø 110V/220V at 50Hz/60Hz; and 3Ø 380V/415V, allowing flexible installation across different workshop power systems. What chamfer angle does the machine produce? This chamfering and deburring machine produces a standard 45° chamfer, suitable for general edge preparation and weld prep applications. Is the VCF-500W suitable for small workshop environments? Yes, the bench‑mount format, compact 500 x 440 mm footprint and manageable weight of 29.1 kg make the Vertex VCF-500W appropriate for small workshops and maintenance bays. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500x500mm 90° Angle Plate With M16 T-Slots, 500x350mm Base - Vertex
Take advantage of the combination of robust build, precise 90° clamping and a large measuring surface to streamline setup and inspection workflows. Order the angle plate directly via Metav Werkzeuge or contact the consultants for tailored advice. Angle plate BP22-850 – 90° clamping angle plate with M16 T-slots, Vertex The Angle plate BP22-850 is a 90° clamping plate designed for secure fixturing and measurement tasks in production and inspection environments. Heavy-duty 184 kg construction 90° clamping surface with M16 T-slots 500 x 500 mm measuring table 500 x 350 mm solid base Engineered mass for vibration damping and repeatable accuracy The considerable mass of 184 kg provides a stable foundation that reduces vibration during machining and inspection, which directly improves measurement repeatability and surface finish quality. By increasing inherent rigidity, the heavy construction helps to maintain positional accuracy when fixtures and components are clamped to the face. For shops where repeatable setups save time and rework, this solid build reduces the need for compensating fixtures and shortens setup cycles. Versatile fixturing via M16 T-slots for efficient workflows The 90° face is fitted with T-slots sized for M16 clamping elements, enabling modular and secure attachment of clamps, stops and bespoke fixtures. The slot pattern supports common clamping systems used across tooling departments, allowing rapid reconfiguration between jobs. For users unfamiliar with the specification, M16 denotes the thread size for the clamping studs; compatibility with standard hardware ensures easy integration into existing tooling inventories without special adaptors. Generous footprint and dedicated measuring surface for inspection tasks A 500 x 350 mm solid base combined with a 500 x 500 mm measuring table gives a broad, flat platform for component support and probe access during metrology checks. The larger table area simplifies alignment and permits the simultaneous staging of multiple parts or gauges, reducing movement between operations. The layout is particularly beneficial where coordinate measuring or optical inspection needs a stable reference surface close to the workholding plane. Built for shop-floor resilience and straightforward integration Constructed for industrial use, the fixture plate adapts to production and laboratory settings where durability matters. The combination of a 90° clamping face and standardised T-slots makes it suitable for both machining setups and inspection benches, bridging the gap between workshop fixturing and measurement tasks. The design supports a pragmatic workflow: stable clamping, clear access for tooling, and a defined table area for gauges and fixtures. Contact Metav Werkzeuge for specification checks and procurement support for the Vertex Angle plate BP22-850; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery from Emmerich. Technical data SKU: BP22-850 GTIN: 4061905086137 ECLASS: 21020601 Manufacturer: Vertex Core specifications Weight: 184 kg Base dimensions: 500 x 350 mm Measuring table: 500 x 500 mm T-slot/thread size: M16 Special features 90° clamping angle T-slots for modular fixturing Suitable for production and inspection environments FAQ What applications is this angle plate suitable for? The Vertex Angle plate BP22-850 is suitable for workholding during machining, set-up fixtures and metrology tasks where a rigid 90° reference and large measuring surface are required. What are the T-slot specifications on the face? The clamping face is equipped with T-slots designed for M16 clamping elements, allowing use with standard studs, clamps and modular fixtures. How does the plate weight affect performance? At 184 kg, the mass of the plate provides damping and rigidity, improving stability under load and enhancing repeatability for machining and inspection operations. What are the footprint and table dimensions? The product features a 500 x 350 mm base and a 500 x 500 mm measuring table, offering a substantial platform for both fixturing and gauge placement. Is the plate compatible with common clamping systems? Yes; the M16 T-slots are compatible with widely used clamping hardware, enabling straightforward integration with existing tooling sets and reducing the need for customised adaptors. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
502mm Machine Vice Tiltable Power Or Quick, 0-205 mm Jaw Opening - Vertex
Take advantage of the combination of a hydraulic clamping system, a tilting head and a wide opening 0–205 mm to increase productivity and repeatability on the shop floor. Order the unit directly via Metav Werkzeuge or consult the team for delivery and configuration advice. VUT-4NC Hydraulic tilting machine vice by Vertex — Hydraulic (Power) clamping, tilting head VUT-4NC is a hydraulic machine vice designed for secure workholding in milling and general machining, offering a tilting function and a broad jaw opening for versatile clamping across many workpieces. Hydraulic clamping for repeatable force Tilting head for versatile machining angles Opening range 0–205 mm for varied workpieces Cast-iron body for vibration damping and durability Consistent throughput thanks to hydraulic clamping The hydraulic operation provides a uniform clamping force that reduces the variability of manual tightening and the risk of part movement during machining. With this method, cycle times are more predictable and set-up is simplified, which supports lean production flows and reduces rework. The vice is particularly useful where repeatability matters: the hydraulic mechanism maintains pressure across successive operations, improving component yield and safeguarding cutter life through steady workholding. Longer service life from robust construction Constructed from cast iron, the vice absorbs machining vibrations and resists deformation under load, which extends service intervals and preserves alignment. The substantial body and well-engineered sliding surfaces translate into lower maintenance effort compared with lighter designs, and the material choice contributes to dimensional stability across shifts. For workshops aiming to minimise downtime, the heavy-duty build offers a reliable basis for daily production demands and consistent clamping accuracy. Greater flexibility with a tilting function The integrated tilting mechanism allows angled clamping without the need for additional fixturing, enabling chamfering, bevel machining and angled drilling in a single set-up. This flexibility reduces part handling and set-up time while increasing machining scope from one vice. The tilting function therefore supports more efficient batch processing and opens possibilities for complex geometries without substantial investment in secondary fixtures. Space-efficient design with a wide jaw opening Despite a compact footprint of 285 x 390 x 264 mm, the vice offers an opening of 0–205 mm, accommodating a range of component sizes while saving bench space. The overall height of 502 mm is engineered for stable clamping at conventional machine-bed heights. This balance of small external dimensions and a broad clamping range makes the vice well suited to busy workshops where floor space and fixture versatility are decisive factors. Discuss application fitment and delivery with Metav Werkzeuge — the Emmerich-based precision partner ready to advise on clamping solutions and ensure reliable supply Technical data Article number: VUT-4NC GTIN: 4061905083693 ETIM: EC002173 Facts Type: Hydraulic (Power) Material: Cast iron Opening: 0–205 mm Dimensions: 285 x 390 x 264 mm Height: 502 mm eClass: 21020601 Special features Tilting function (kippbar) Suitable for milling and general machining clamping tasks Brand: Vertex FAQ What clamping range does the vice offer? The vice provides an opening range of 0–205 mm, suitable for a broad variety of workpieces commonly encountered in machining. Is the unit suitable for heavy-duty milling operations? Yes. The cast-iron construction combined with hydraulic clamping gives the vice the stability required for demanding milling tasks. Can the vice be tilted for angled machining? The integrated tilting mechanism allows angled setups, enabling chamfers and bevels to be machined without additional fixtures. What makes the hydraulic system advantageous over manual vices? Hydraulic clamping offers consistent force and repeatable set-ups, which reduces part slippage and helps maintain cutter life and dimensional accuracy. Who supplies and ships the vice within Europe? Metav Werkzeuge manages stock and distribution from Emmerich, offering experienced consultation and reliable logistics for workshop supply. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com