Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
50mm 1-13mm Quick-Change Drill Chuck MK4 Self‑Clamping Right-Hand, Compact Design - ALBRECHT
Combine compact construction, high runout accuracy and an integral MT4 taper for stable, repeatable drilling operations; benefit from reduced set‑up time and consistent hole quality. Order directly via Metav Werkzeuge or consult the specialists for application advice. SBF-plus quick‑change drill chuck – keyless, 1–13 mm, MT4, ALBRECHT The SBF-plus is a compact quick‑change drill chuck for right‑hand rotation, designed for workshop and light production use with an integral MT4 (Morse taper 4) shank. Clamping range 1–13 mm Integral MT4 Morse taper shank Self‑tightening, compact design High runout accuracy, 50 mm body Stable clamping for consistent production quality The compact chuck delivers reliable clamping across a 1–13 mm range, which reduces rework and increases throughput in repetitive drilling tasks. The self‑tightening mechanism converts applied torque into a firmer grip during right‑hand rotation, ensuring drill bits remain secure under load. For practical understanding: improved clamping and consistent concentricity mean fewer rejected parts and less time spent on alignment, making the tool an efficient choice for workshop environments and small production runs. Compact construction that improves concentricity and rigidity Thanks to the integrated design where the chuck and arbor form a single unit, the assembly minimises offset and enhances stability. The 50 mm outer diameter contributes to a rigid interface that reduces vibration and helps maintain low runout. Low runout (high concentricity) translates directly into cleaner holes and longer tool life for cutting edges. The compact layout also aids access in confined setups, allowing machining close to fixtures without compromising accuracy. Machine compatibility and practical application guidance Fitted with an MT4 (Morse taper 4) shank, this chuck mates with spindles and arbors that accept MT4 tooling. It is configured specifically for right‑hand rotation; the self‑tightening feature relies on this direction to increase clamping force under torque. Compatibility therefore depends on the host machine’s taper and rotation direction. For customers evaluating fitment, the integral MT4 arrangement means straightforward mounting on compatible drill presses and toolholders without additional adaptors. Low‑effort maintenance and trusted supply chain The compact and robust construction reduces the number of wear points, simplifying routine inspection and maintenance. Where periodic checks are required, attention to jaw condition and runout will preserve performance and extend service intervals. Metav’s role as a precision partner ensures consistent supply and technical backup: decades of experience and a wide product range mean suitable accessories and replacement components are readily available for workshop continuity. For tailored advice on integrating the ALBRECHT SBF‑plus into existing machinery or to request a quotation, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com — consultants are available to specify the correct chuck configuration for the application. Technical data Article number: 4000832523NW Brand: ALBRECHT Product type: Quick‑change drill chuck SBF‑plus Specifications Clamping range: 1–13 mm Outer diameter: 50 mm Shank: MT4 (Morse taper 4) Rotation: right‑hand Packaging unit: 1 Special features Integrated Morse taper shank Self‑tightening (for right‑hand rotation) Compact design for optimal stability Chuck and arbor form a single unit FAQ What clamping range does the chuck support? The SBF‑plus quick‑change chuck supports a clamping range of 1–13 mm, suitable for a broad range of standard twist drills. Which shank does this chuck use and how is it mounted? This version uses an MT4 (Morse taper 4) shank; the chuck and shank form an integral unit for direct mounting in compatible MT4 spindles or adaptors. Is the chuck suitable for left‑hand rotation or reverse drilling? No—this chuck is designed for right‑hand rotation; the self‑tightening feature requires clockwise (right‑hand) spindle direction to increase clamping under load. How does the self‑tightening function benefit daily use? Under normal right‑hand drilling, applied torque increases jaw pressure, reducing slippage and improving repeatability, which is particularly beneficial in series production. What dimensional feature supports good runout performance? The compact body and integral arbor, combined with the 50 mm outer diameter, contribute to reduced vibration and improved concentricity for higher runout accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 12mm T-Slot Screw M12 Grade 10.9 With Nut And Washer, DIN 787 - AMF
A compact solution for secure fixture clamping: the M12 T-slot screw meets DIN 787 and offers high tensile grade 10.9 strength in a 50 mm length for reliable tool-holding; supplied complete with nut and washer for immediate installation. Order the T-slot screw directly via Metav Werkzeuge or ask our consultants if needed. T-slot screw DIN 787 — M12 x 50 mm, grade 10.9 (AMF) T-slot screw DIN 787 for 12 mm T-slots, designed for secure clamping in machine tables, fixtures and tooling plates T-slot screw »4000833309NW« by AMF DIN 787 standard for secure clamping M12 thread for 12 mm T-slots Grade 10.9 strength, incl. nut and washer Robust clamping performance for workshop and production The fastener conforms to DIN 787, ensuring a standardised fit for machine tables and fixture systems. With an M12 thread matched to a 12 mm T-slot and an overall length of 50 mm, the screw provides consistent thread engagement and repeatable clamping force. The grade 10.9 designation signals elevated tensile and yield strength compared with lower grades, which reduces elongation under load and helps prevent fixture movement during machining. This combination of standard conformity and mechanical strength supports reliable production processes and minimises rework. Ready-to-install design reduces assembly time Delivered with a matched nut and washer, the fastener arrives as a complete clamping solution ready for immediate use on standard T-slot tables. The single-length configuration simplifies parts handling and inventory, while the screw geometry is optimised for insertion into 12 mm slots without additional modification. Because the item is supplied as a set, workshop staff can complete jigs and fixtures faster, reduce downtime between set-ups and keep cycle times predictable — practical benefits for both one-off jobs and repetitive production runs. Proven quality and supply assurance for industrial use Produced under the AMF designation, this screw is traceable by SKU 4000833309NW and intended for demanding assembly and tooling tasks. The robust mechanical properties and standardised dimensions make it suitable for use across milling machines, drilling rigs and modular fixture systems where consistent clamping is required. Metav’s distribution ensures a dependable supply channel and a quality filter at the European hub in Emmerich, supporting long-term availability and straightforward replenishment for professional workshops and industrial buyers. For AMF-grade clamping reliability and quick technical advice, contact Metav Werkzeuge in Emmerich — ordering and consultancy are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833309NW Label: T-slot screw DIN 787 M12 x 50 mm grade 10.9 incl. nut and washer Brand: AMF Numbers / Core technical data Thread: M12 T-slot width: 12 mm Overall length: 50 mm Strength class: 10.9 Packaging unit: 1 Special features / Versions Conforms to DIN 787 Supplied with nut and washer SKU for ordering: 4000833309NW Axite enrichment values: A: 11.7; B: 35; E: 18; K: 7 FAQ What standard does this T-slot screw meet? The item complies with DIN 787, which defines dimensions and profiles for T-slot screws used in machine tables and fixtures. Which thread and T-slot size are suitable for this screw? The screw carries an M12 thread and is designed specifically for 12 mm T-slots, providing standardised compatibility with machine tables. Is the nut and washer included in delivery? Yes, the T-slot screw is supplied complete with the matching nut and washer so it is ready for immediate installation. What is the overall length and strength class? Overall length is 50 mm and the fastener is manufactured to grade 10.9, offering higher tensile strength for demanding clamping tasks. How can the product be identified when ordering? Use SKU 4000833309NW or the label reference for ordering and stock enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 1–13mm Quick-Change Drill Chuck B16 Self-Clamping, Maximum Clamping Force, Hardened Replaceable Parts - ALBRECHT
Benefit from a combination of self‑tightening clamping, maximum clamping force and outstanding runout accuracy for reliable drill holding in repetitive machining. Order supply or request advice directly from Metav Werkzeuge for fast delivery and technical guidance. ALBRECHT SBF quick-change drill chuck – 1–13 mm, B16 taper, right‑hand rotation ALBRECHT SBF quick-change drill chuck for secure, self‑tightening clamping of twist drills in workshop and light industrial applications Self‑tightening design for secure grip Clamping range 1–13 mm B16 taper for straightforward mounting Replaceable hardened wear parts Consistent clamping for accurate holemaking The self‑tightening mechanism converts spindle torque into additional clamping force, delivering a maximum clamping force that reduces slippage under load. With a 1–13 mm clamping range, the chuck secures a wide variety of twist drills and short tool shanks, enabling shorter setups and fewer tool changes. Improved holding stability contributes directly to longer cutter life and more consistent hole quality, while the design helps to maintain spindle efficiency during repetitive production runs. Built for durability and fast serviceability Constructed with all wear parts case‑hardened, ground and replaceable, the chuck is engineered for extended service life and straightforward maintenance. The B16 taper mount provides a compact, rigid connection to standard drill spindles, and the modest 50 mm outer diameter keeps the assembly slim for use in tighter fixtures. Replaceable components mean less downtime: worn elements can be exchanged without replacing the entire chuck, improving cost efficiency over many service cycles. Workshop compatibility and precision under rotation Designed for right‑hand rotation, the chuck matches typical drill spindle directions and is optimised for high rotational stability and minimal eccentricity. The combination of precision machining and hardened running surfaces yields excellent runout accuracy, which translates to better concentricity of drilled holes and reduced rework. For operations seeking dependable clamping across mixed tool sizes, this compact, high‑precision chuck supports smoother production workflows and predictable repeatability. For tailored technical advice or to arrange supply from our Emmerich warehouse, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4120167209NW Manufacturer: ALBRECHT Product type: Quick-change drill chuck (SBF) Mounting: B16 Clamping range: 1–13 mm Outer diameter: 50 mm Rotation: Right‑hand Packaging unit: 1 UID: 4120167209NW Key figures Clamping range: 1–13 mm Outer diameter: 50 mm Mounting: B16 taper Packaging unit: 1 Design and special features Self‑tightening Maximum clamping force With taper mount For high durability and highest runout accuracy All wear parts case‑hardened, ground and replaceable For right‑hand rotation FAQ Which drill sizes can be clamped with this chuck? The ALBRECHT SBF quick‑change drill chuck clamps twist drills from 1–13 mm, covering common diameters for general drilling tasks. Is the chuck suitable for heavy‑duty or repetitive use? Yes; the SBF chuck is designed for high durability with case‑hardened, ground, replaceable wear parts, making it well suited to repetitive workshop and light industrial use. How is the chuck mounted to the spindle? Mounting is via a B16 taper, which provides a compact, rigid connection to compatible spindles and tooling interfaces. Does the chuck support left‑hand and right‑hand rotation? This model is specified for right‑hand rotation, optimised for standard spindle direction in drilling applications. What maintenance is recommended to preserve runout accuracy? Regular inspection and replacement of the hardened wear parts as required will help preserve the chuck’s runout accuracy and clamping performance; worn components can be exchanged without replacing the entire unit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 1–13mm Quick-Change Drill Chuck MK3 Self-Clamping, Right-Hand Rotation - ALBRECHT
Benefit from the compact construction, integrated MK3 Morse taper and self‑tightening clamping for consistently precise drilling. The unitary design of chuck and shank reduces run‑out and simplifies workshop routines. Order the SBF‑plus directly via Metav Werkzeuge or consult our advisors for application advice. SBF-plus Quick-change drill chuck – 1–13 mm clamping, MK3 taper, ALBRECHT The SBF-plus is a quick-change drill chuck with an integrated Morse taper MK3, designed for right‑hand rotation drilling tasks in metalworking and general workshop applications. Integrated MK3 Morse taper Self‑tightening quick‑change action Compact design for high run‑out accuracy 1–13 mm clamping range Faster, more reliable clamping for routine production The quick‑change drill chuck delivers a measurable productivity benefit through its self‑tightening mechanism and compact construction. These features translate into fewer tool changes and reduced setup time, which is particularly valuable in small‑batch production or busy repair shops. The result is a more predictable workflow and reduced rework, driven by the chuck’s ability to hold standard shank drills and bits securely without repeated manual retightening. This means steadier feeds and fewer interruptions during repetitive drilling operations. Secure machine interface via integrated Morse taper MK3 By combining the chuck and shank into one integrated component, the design eliminates an extra connection and therefore minimises sources of misalignment. The MK3 Morse taper provides a secure, repeatable interface to spindles that accept Morse tapers, improving concentricity and reducing vibration under load. For operators this offers a clear benefit: improved hole quality and longer life for cutting tools because the reduced micro‑movement keeps cutting edges engaged consistently with the workpiece. Broad 1–13 mm range to cover common drilling needs A clamping capacity of 1–13 mm accommodates a wide variety of twist drills and small end mills, which helps to reduce the number of specialised chucks or adaptors required in a workshop. The broad range supports quick transitions between diameters without changing the clamping tool, saving time on multi‑size jobs. This versatility is particularly useful for maintenance teams and toolrooms that face varied drilling tasks and require dependable performance from a single, compact chuck. Built for stability and precise run‑out performance The compact geometry and robust assembly of the chuck aim to deliver high run‑out accuracy, keeping holes true and repeatable even when used in series production. The fact that the chuck and shank form a single unit reduces the risk of loosening or misfit that can occur with separate adaptors. Paired with right‑hand rotation design, the component is optimised for standard drilling applications on compatible machine spindles, balancing everyday durability with the precision expected in professional workshops. For reliable MK3 clamping and workshop compatibility, request technical availability or application advice from Metav Werkzeuge — supply from Emmerich with experienced consulting tailored to industrial and trade requirements. Technical data Article number: 4000832522NW Type: SBF‑plus Product: Quick‑change drill chuck Facts Clamping range: 1–13 mm Shank: MK3 Rotation: Right‑hand Outer diameter: 50 mm Special features Integrated Morse taper MK3 Self‑tightening function Compact construction for improved run‑out accuracy Chuck and shank form a single unit FAQ What clamping range does the chuck support? The chuck supports a 1–13 mm clamping range, making it suitable for a wide variety of standard twist drills and small cutters. Is the integrated taper compatible with standard spindles? Yes, the integrated MK3 Morse taper matches machine spindles designed for MK3 tapers and provides a secure, repeatable interface for everyday workshop use. How does the self‑tightening mechanism affect performance? The self‑tightening action increases holding security under load and reduces the need for frequent manual retightening, which improves drilling consistency and tool life with the ALBRECHT quick‑change chuck. Can this chuck be used for precision holemaking? The compact design and unitary shank–chuck assembly enhance concentricity and deliver high run‑out accuracy, which supports precise holemaking in typical workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Boring Bar Holder E2 S Slotted, Through-Bored DIN 69880, 16mm Clamping - TECWERK
Benefit from reduced vibration, a through‑drilled shank for versatile cooling and a retaining ring that prevents the holder from falling into the turret; these features combine to secure consistent machining performance and longer tool life. Order the TECWERK E2 S toolholder directly via Metav Werkzeuge or ask our consultants if needed. TECWERK E2 S Toolholder for Boring Bars (VDI30, 16 mm clamping) TECWERK E2 S Toolholder for precision boring applications, compatible with VDI30 interfaces and designed to reduce vibration and enable internal cooling E2 S slotted design reduces vibration Through‑drilled shank for internal cooling Secured against falling out with retaining ring Compatible with VDI30, 16 mm clamping diameter Stable clamping for precise boring results The E2 S slotted design is engineered to dampen oscillation and reduce vibration during cutting, which directly improves surface finish and dimensional stability. With a clamping diameter of 16 mm and a VDI30 interface, the holder provides a defined, repeatable connection between machine and boring bar; this decreases setup variability and supports consistent batch production. For workshop managers, the measurable outcome is fewer rejects and less rework thanks to the enhanced stability of the machining system. Cooling and chip control that keep cycles running A through‑drilled shank enables both internal and external cooling, permitting coolant to reach the cutting edge and lower cutting temperatures. Cooler cutting conditions reduce tool wear and preserve insert geometry, so cycle times remain stable over longer runs. The option for internal coolant supply is particularly beneficial for deep boring or hard-to-access cavities where external cooling alone is insufficient, improving process reliability and reducing the frequency of unscheduled tool changes. Secure mounting and straightforward length adjustment The holder is secured by a retaining ring, preventing accidental release into the turret and reducing downtime from tool retrieval. Shafts are drilled where feasible to allow length adjustment from the shank side, enabling fine alignment without removing the holder from the machine in many cases. The component’s overall length of 95 mm and a functional length of 73 mm make it suitable for a broad range of turret and toolpost arrangements while keeping the centre of gravity compact for reduced runout. Standard conformity and on‑machine compatibility Built to DIN 69880 and matching the VDI30 taper system, this toolholder integrates with standard turret configurations and is also suitable for fully round boring bars with a V‑groove. The slotted area accommodates several bar diameters (up to 16 mm at 4×D, 20 and 25 mm at 3×D, and from 32 mm at 2.5×D), offering versatility across different tooling setups. The standardised interface shortens commissioning time and simplifies inventory management for production environments that rely on interchangeable clamping solutions. For tailored advice, technical clarification or to secure this TECWERK E2 S toolholder through Metav Werkzeuge—trusted from our Emmerich hub—please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000833474NW Brand: TECWERK Product category: Toolholder for boring bars Form: E2 S Type: A Norm: DIN 69880 Dimensions & Core Data Diameter D: 50 mm Overall length L: 95 mm Functional length L1: 73 mm Clamping diameter d2: 16 mm Interface diameter d1: 30 mm Through‑drilled: Yes Special features Slotted execution to reduce vibration Suitable for fully round boring bars with V‑groove Slotted area: up to 16 mm at 4×D; 20/25 mm at 3×D; from 32 mm at 2.5×D Shafts drilled where possible for coolant or length adjustment Secured with retaining ring to prevent falling into the turret Internal and external cooling possible Designed for boring bars FAQ What clamping diameter does this holder accept? The TECWERK E2 S toolholder accepts a 16 mm clamping diameter and is configured for VDI30 mounting. Is internal coolant supported? Yes—this holder features a through‑drilled shank, allowing internal and external cooling to be applied to the boring bar. How does the holder prevent accidental release? A retaining ring secures the holder in the turret, so the toolholder is protected against falling out during operation. Which standards and interfaces are supported? The holder conforms to DIN 69880 and fits VDI30 interfaces for standard turret compatibility. Can the holder be used with fully round boring bars? Yes—the design is suitable for fully round boring bars with a V‑groove, offering versatility across bar types. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50mm Clamping Vise Flat Support Height 50-70mm Load Capacity 100kg TR 30x4 - AMF
Take advantage of a compact clamping solution that combines robust load handling, adjustable flat support and simple operation for consistent workshop results. The combination of secure thread drive and a 50–70 mm support height ensures stable seating of varied workpieces. Order the AMF screw clamp directly via Metav Werkzeuge or ask our consultants if needed. AMF Screw Clamp Nr. 6400 - 70 — flat support, adjustable 50–70 mm The AMF Screw Clamp Nr. 6400 - 70 is a compact clamping device for workshop and industrial fixtures, offering a flat support with an adjustable height range to hold a variety of components securely. Flat support, height adjustable 50–70 mm Max. capacity 100 Thread TR 30 x 4 for secure clamping Compact group size 70 with 50 mm diameters Reliable clamping performance for routine production This clamping unit delivers predictable, repeatable holding with a focus on operational efficiency. The screw clamp mechanism, driven by a TR 30 x 4 thread, converts operator input into steady axial force, reducing the need for frequent repositioning. For production environments where cycle time and reproducibility matter, the stable mechanical action supports quicker setup and consistent results, helping to reduce rework and maintain throughput. Flexible flat support for varied workpieces An adjustable flat support with a 50–70 mm height range provides flexibility when securing parts of different profiles. The adjustable height allows the support to be aligned with the workpiece datum, improving contact area and reducing deformation risk on delicate components. This adaptability makes the device suitable for workshops that process both small-scale fixtures and larger assemblies, simplifying the clamping process while preserving precision. Compact design that integrates into workshop jigs Designed as a group-size 70 clamping element with D1/D2 = 50 mm, the item is easy to incorporate into existing jigs and fixtures. The compact footprint enables close placement of multiple clamps when evenly distributed holding force is required. Given its construction, the unit is appropriate for metalworking and general workshop use where secure seating and repeatable positioning are essential. The AMF screw clamp balances robustness and space efficiency for everyday shop applications. Contact Metav Werkzeuge for tailored advice on integrating the AMF screw clamp Nr. 6400 - 70 into production fixtures; call +49 2822 7131930 or email info@metav-werkzeuge.com for immediate assistance and supply from Emmerich Technical Data Article number: 4000833114NW Type: Nr. 6400 - 70 Product: Screw clamp Brand: AMF Packaging unit: 1 Core specifications Max. capacity: 100 Thread: TR 30 x 4 Height min.: 50 mm Height max.: 70 mm D1: 50 mm D2: 50 mm Features Flat support Group size 70 Compact design Ready for jig integration FAQ What is the maximum load the clamp can take? The maximum load is stated as 100 for the AMF screw clamp Nr. 6400 - 70. How is the support height adjusted? Height adjustment is achieved via the clamping assembly; the adjustable flat support on the AMF screw clamp allows settings from 50 mm to 70 mm. Is the clamp suitable for integration into existing fixtures? Yes, the compact group size 70 and 50 mm diameters make the clamp suitable for integration into workshop jigs and fixture plates. Which thread specification does the clamping drive use? The clamping drive uses a TR 30 x 4 thread, providing secure and reliable axial movement for clamping action. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Collet Chuck ER-32 Taper For ER Collets, 50mm Diameter - Vertex
Take advantage of precise ER‑collet compatibility together with a secure Morse‑taper mounting to ensure fast, repeatable set-ups and steady tool clamping. The combination of ER‑32 specification and proven Vertex manufacturing delivers robust workshop performance and predictable results. Order directly via Metav Werkzeuge or request further specification advice from our consultants. Vertex V-407 Collet chuck — ER collet clamping with Morse taper The V-407 collet chuck secures ER collets in a Morse‑taper mount for reliable tool holding in workshop and industrial machining applications. Compatible with ER collets and ER‑32 specification Morse taper (MK) mounting for secure integration Designed for stable, repeatable clamping Compact weight for straightforward handling Consistent clamping for repeatable production A stable clamping solution reduces scrap and rework. The ER collets engagement combined with the chuck’s design provides repeatable concentricity, which shortens set‑up times and stabilises machining processes. For production environments where part tolerances are critical, the chuck’s ability to maintain alignment under cutting forces translates directly into fewer rejects and higher throughput. The mechanical simplicity supports quick collet changes and straightforward inspection routines, improving overall equipment effectiveness. Secure mounting that fits standard spindles The Morse‑taper interface enables straightforward integration into machines with MK taper spindles. The Morse taper mounting absorbs radial and axial loads efficiently while keeping the clamping assembly compact. Compatibility with the ER‑32 system allows use of a wide range of collet diameters for different tools, reducing the need for multiple specialised holders. This configuration supports stable rotational behaviour and contributes to smoother surface finishes when compared with less rigid holding methods. Built for workshop reliability and efficient workflows Manufactured by Vertex, this chuck is intended for frequent use in both maintenance shops and production cells where reliability matters. The relatively low mass eases handling during tool changes without sacrificing rigidity, while the ER system’s universality minimises inventory complexity. Combined with Metav Werkzeuge’s distribution from Emmerich and quality‑filtering for the European market, the solution supports dependable re‑supply and consistent product standards across installations. Select the Vertex V-407 for dependable ER‑collet clamping — contact Metav Werkzeuge in Emmerich for specification support and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: V-407 GTIN: 4061905087134 Manufacturer: Vertex Weight: 1 kg Facts Diameter: 50 mm Taper type: ER-32 eClass: 21020405 Special features For ER collets with Morse taper mounting Designed for workshop and industrial machining Compact, easy to handle assembly FAQ Is this chuck compatible with standard ER collets? The V-407 is designed for use with ER collets and follows the ER‑32 specification to accept the corresponding collet range. Which taper does the chuck use for mounting? The chuck is supplied for installation in a Morse taper (MK) spindle, providing a secure mechanical fit on compatible machine spindles. Can the chuck be used for repeated production set‑ups? Yes, the V-407’s stable clamping and ER system compatibility support repeatable set‑ups suitable for serial machining tasks. What maintenance is required to keep clamping performance? Regular cleaning of the collet seat and taper surfaces, plus inspection for wear, preserves the chuck’s clamping ability; the V-407 benefits from routine care to maintain concentricity. Is the chuck suitable for heavy cutting or only light duties? The V-407 is intended as a robust workshop clamping solution; actual suitability for heavy cutting depends on the machine and collet selection rather than the chuck alone. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Collet Chuck For ER Collets With ER-32 Taper - Vertex
Take advantage of precise ER-collet clamping, a compact 50 mm working profile and simple Morse taper mounting for shorter setup times and consistent machining. Order the V-405 collet chuck directly via Metav Werkzeuge or contact our consultants for technical advice and stock information. Collet chuck V-405 — ER-32 compatibility, MT (Morse taper) mounting (Vertex) Collet chuck V-405 for secure clamping of ER collets in machine spindles with a Morse taper; suited to workshop and light production environments ER-32 collet compatibility for standard tooling Morse taper mounting for quick spindle integration 50 mm working diameter for compact setups Robust build for routine workshop use Consistent concentricity for repeatable machining accuracy The ER-32 interface is a widely used standard for collet clamping and ensures consistent concentricity, which reduces rework and scrap. With a 50 mm working profile and compact form factor, the chuck keeps tool overhang low and contributes to stable cutting conditions. The design supports quick insertion and removal of ER collets, allowing familiar clamping workflows while maintaining precision across repeated setups. The result is predictable part quality and fewer tool-change interruptions. Faster tool changes via Morse taper seating A Morse taper (MK) mounting simplifies installation on compatible spindles and balances secure retention with straightforward removal. The Morse taper interface seats the body precisely in the spindle, reducing alignment steps during changeover and shortening non-productive time. Weighing approximately 0.8 kg, the unit is easy to handle during maintenance or replacement, while the ER system itself retains collets firmly under machining forces. This combination supports efficient workflows on both manual and CNC machines. Durable, standardised clamping for workshop integration Built for compatibility with common ER tooling, this collet holder integrates into existing tooling inventories with minimal adaptation. Standard ER collets and accessories can be used, which keeps spare-part lists short and maintenance predictable. As part of the Vertex range, the chuck benefits from established manufacturing practices and quality control, offering reliability for everyday tasks. Purchasing through Metav Werkzeuge adds the advantage of a Europe-based quality filter and logistical support for straightforward delivery to the workplace. For reliable clamping performance and quick integration with ER tooling, contact Metav Werkzeuge in Emmerich for stock and purchasing advice at info@metav-werkzeuge.com or by phone; Metav Werkzeuge will advise on the best configuration for specific machine spindles and production needs. Technical data Article number: V-405 GTIN: 4061905086465 Manufacturer: Vertex Facts Diameter: 50 mm Weight: 0.8 kg ECLASS: 21020405 Features For ER collets with Morse taper mounting Compatible with ER-32 collets SKU: V-405 FAQ What collet system does this chuck use? The unit accepts the ER collet system; the V-405 is specified for ER-32 collets and works with standard ER tooling. Can the chuck be fitted directly to a machine spindle? Yes, the V-405 is supplied for mounting via a Morse taper (MK) to seat directly in a compatible spindle taper. Is this product suitable for production use on CNC machines? The Vertex V-405 collet chuck is designed for routine workshop and light production tasks where standard ER-32 clamping meets the application's precision requirements. How heavy is the chuck and does that affect handling? The chuck weighs approximately 0.8 kg, which makes handling and mechanical installation straightforward for routine maintenance and changeover. Which collet diameters can be used with the ER-32 interface? A range of ER collet diameters intended for an ER-32 holder can be used; selection depends on the required clamping diameter for the tooling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Collet Chuck With Steep Taper For ER Collets, ER‑32 - Vertex
A reliable combination of a steep ER‑32 taper and a 50 mm nominal diameter delivers secure clamping and straightforward integration into ER collet workflows. The compact construction at 0.8 kg simplifies handling during tool changes while maintaining stable contact under load. Order the collet chuck directly via Metav Werkzeuge or ask our consultants for tailored technical advice. V-745A Collet Chuck — ER‑32 steep taper, 50 mm diameter (Vertex) A robust V-745A Collet Chuck designed for secure clamping of ER collets in machining and tooling applications. ER‑32 steep taper for ER collets 50 mm nominal diameter Lightweight 0.8 kg construction Vertex manufactured quality Secure clamping for consistent machining results The steep taper on this chuck ensures axial contact between the holder and the collet, improving secure clamping under cutting forces. Manufactured for use with standard ER systems, the taper design reduces the risk of slippage and contributes to consistent concentricity during operations. This stability translates into fewer reworks and a more predictable production rhythm for repetitive machining tasks. Compact handling that keeps workflows moving At just 0.8 kg, the unit is easier to mount and remove, which shortens changeover times and supports more efficient tool handling. The compact footprint and modest mass reduce strain during manual operations and facilitate quicker fixture changes on the workbench or in a tooling cupboard. The lightweight construction therefore contributes directly to smoother process organisation and reduced machine downtime. Straightforward integration with ER collet systems Compatibility with ER‑32 collets makes the chuck a practical choice for workshops standardised on ER tooling. The design supports direct installation into appropriate steep‑taper spindles or toolholders and works alongside established clamping consumables. For identification and procurement the item is listed as V‑745A and is supplied by Vertex, ensuring traceability and consistent manufacturing standards. For secure ER‑32 clamping with the Vertex V‑745A, contact Metav Werkzeuge in Emmerich for personalised advice or to request a quotation via info@metav-werkzeuge.com Technical Data SKU: V-745A GTIN: 4061905087028 Name: Collet chuck (Spannzangenfutter) Facts Diameter: 50 mm Weight: 0.8 kg Taper: ER‑32 Special features Steep taper for ER collets Manufacturer: Vertex FAQ Which collet system is this chuck designed for? The chuck is designed for ER collets and uses an ER‑32 steep taper; the V‑745A by Vertex accepts standard ER collet inserts. What are the nominal diameter and weight? Nominal diameter is 50 mm and the unit weight is 0.8 kg, as specified for the V‑745A. Can this chuck be used with standard ER tooling in production machines? Yes, the design is intended for integration with ER‑32 collet systems and compatible toolholders and spindles that accept a steep taper. How does the steep taper affect clamping performance? The steep taper increases axial contact between collet and holder, improving clamp stability and reducing the likelihood of slippage under cutting loads. What identifying codes should be used when ordering? Use SKU V‑745A and GTIN 4061905087028 for unambiguous ordering and inventory purposes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Collet Chuck With Taper For ER Collets, ER-32 Taper - Vertex
Combine precise ER-32 clamping, a compact 50 mm footprint and a stable 3.7 kg mass to achieve dependable toolholding and consistent part quality. Order the collet chuck directly via Metav Werkzeuge or ask the consultants for integration advice. V-745B collet chuck — ER-32 steep taper, 50 mm The V-745B is a collet chuck with a steep taper designed for ER collets, offering secure clamping and compact integration for machining centres and toolholding systems Secure clamping for ER-32 collets 50 mm diameter for compact setups Robust 3.7 kg mass for stability Steep taper for high radial precision Consistent clamping for repetitive machining The clamping system is optimised for ER-32 collets, providing reliable axial retention and repeatable holding force that supports stable cutting conditions. The collet chuck concept reduces elastic deformation during cutting, which improves concentricity and contributes to predictable part tolerances. For toolholding and fixture design, the steep-taper interface ensures a solid mechanical connection between spindle and chuck, translating into consistent performance across production runs. Small footprint with stable mass for compact machines A 50 mm outside diameter keeps the toolholding envelope compact, permitting use where spindle clearance is limited and allowing closer tool spacing on multi-spindle setups. The measured 3.7 kg mass lends beneficial inertia that dampens vibration without excessive bulk, aiding dimensional stability during interrupted cuts. This combination supports effective use in workshops and production cells that require precision in confined spaces while maintaining practical handling and balance. Integration and workshop usability The steep taper interface is tailored for straightforward installation in compatible spindles and adapters, simplifying retrofits and maintenance cycles. The design suits standard ER collet systems and can be combined with commonly available collets, clamping nuts and balancing procedures. As a Vertex product, the V-745B aligns with established toolholding practices and is intended for use where accurate, repeatable clamping is a production requirement rather than an ad hoc solution. For enquiries about the Vertex V-745B collet chuck or to discuss integration into existing toolholding systems, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant. Technical data Article number: V-745B GTIN: 4061905085994 Manufacturer: Vertex Facts Diameter: 50 mm Weight: 3.7 kg Taper: ER-32 Special features Steep taper for ER collets Suitable for ER collet systems Compact design for limited spaces FAQ Which collet size fits this chuck? The V-745B is designed for ER-32 collets and is compatible with standard ER-32 collet ranges for general toolholding tasks. Is the chuck suitable for precision machining? Yes, the steep-taper design and secure ER-32 clamping of the V-745B support high concentricity and repeatability for precision operations. What are the main dimensions and weight? The collet chuck has a 50 mm diameter and a weight of 3.7 kg, values that favour compact installations with stable mass for improved damping. Who manufactures the product and what is the SKU? The chuck is manufactured by Vertex and is listed under the article number V-745B (GTIN 4061905085994). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Centred NT-50 Taper, 4.3kg - Vertex
Benefit from dependable tool retention and straightforward integration: the integrated, self‑tightening design combined with an NT‑50 taper ensures consistent clamping and minimal re‑setting time. Order the chuck directly via Metav Werkzeuge or ask our consultants for compatibility advice. INT-13-NT50 drill chuck — integrated self‑tightening, NT‑50 taper (Vertex) The INT-13-NT50 is an integrated drill chuck for NT‑50 taper spindles, delivering self‑tightening clamping suitable for machining and workshop applications. Integrated self‑tightening mechanism NT‑50 taper interface 50 mm nominal diameter Robust build, 4.3 kg weight Secure retention under load for uninterrupted machining The self‑tightening mechanism reduces axial slippage by increasing clamping force under torque, which results in more consistent tool engagement and fewer resets during production runs. When paired with the NT‑50 taper interface, the system provides a secure spindle connection that supports repeatable seating and reliable power transmission. This combination emphasises machine uptime and process stability, helping to reduce scrap rates and unexpected interruptions in both single‑part and small batch machining. Simple integration and clear compatibility for workshop setups Designed as an integrated chuck for NT‑50 spindles, the accessory fits common taper spindles without additional adapters, simplifying initial setup and changeover procedures. The 50 mm nominal diameter gives a clear reference for tool shank compatibility and fixture planning, while the unit weight of 4.3 kg reflects a solid construction that resists vibration and contributes to consistent precision during cuts. These properties support efficient workflow planning and reduce the need for frequent re‑alignment. Low maintenance and predictable operational behaviour The compact, integrated design reduces the number of exposed moving parts, lowering routine servicing needs and enabling predictable maintenance schedules. The robust construction supports long service intervals and stable clamping behaviour over time, which benefits production environments where repeatability is critical. For users seeking reliable performance with minimal intervention, this chuck combines straightforward mechanical function with the durability expected in demanding workshop conditions. Contact Metav Werkzeuge to confirm NT‑50 compatibility and arrange supply from our Emmerich quality centre Technical data Article number: INT-13-NT50 GTIN: 4061905088858 Manufacturer: Vertex Facts Nominal diameter: 50 mm Weight: 4.3 kg Taper: NT‑50 EClass: 21020490 ETIM: EC002125 SKU: INT-13-NT50 UID: INT-13-NT50 Special features Integrated and self‑tightening design Suitable for NT‑50 taper spindles Robust construction for workshop use Image available (product thumbnail) FAQ What taper does the chuck use? The chuck uses an NT‑50 taper interface and is designed to seat directly on NT‑50 spindles. What is the clamping diameter of the chuck? The clamping reference is a 50 mm nominal diameter as stated for the INT-13-NT50 chuck. How heavy is the chuck and what does that imply? The unit weight is 4.3 kg, indicating a solid build that contributes to vibration resistance and stable clamping during machining. Is the chuck self‑tightening and what benefit does that provide? Yes, the chuck features a self‑tightening mechanism that increases clamping force under load, improving tool retention and reducing slippage during high torque applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Centred NT‑40, Keyless, 1.8kg - Vertex
Take advantage of the combination of integrated self‑tightening clamping, a 50 mm working diameter and NT‑40 compatibility to maintain a steady machining flow; order the drill chuck directly via Metav Werkzeuge or consult our experts if adaptation questions arise. INT-13-NT40 integrated self‑tightening drill chuck by Vertex — 50 mm, NT‑40 taper The INT-13-NT40 is an integrated, self‑tightening drill chuck designed for machine spindles with an NT‑40 taper, ideal for precision drilling and automated machining environments. Integrated self‑tightening mechanism for consistent clamping 50 mm clamping diameter for common tooling sizes NT‑40 taper compatibility for machine spindle integration Robust 1.8 kg construction for stable operation Dependable clamping that reduces set-up variability The integrated self‑tightening design ensures the clamping force increases with spindle torque, reducing the need for repeated manual retightening and improving process reliability. This mechanical behaviour translates into fewer interruptions during production and more consistent hole geometry, which is particularly relevant where repeatability is required. The construction supports secure tool retention without additional adapter components, simplifying tooling stacks and contributing to smoother cycle times. Seamless integration with NT‑40 spindles for easier retrofits An NT‑40 taper provides a standard interface with many vertical and horizontal machining centres; the taper dimension ensures straightforward mechanical matching and accurate axial alignment. Using the NT‑40 interface reduces the number of intermediate adaptors and helps maintain coaxiality between spindle and tool, which benefits hole precision and tool life. Specifying an NT‑40 interface avoids unnecessary spindle modifications while enabling quick installation and removal during tool changes. Practical dimensions for routine workshop operations With a 50 mm clamping diameter the chuck accommodates a wide range of conventional drill shank sizes, offering a balance between versatility and compactness. The unit’s 1.8 kg mass contributes to rigidity without excessive inertial load on automatic tool changers. These measured characteristics help planners estimate handling requirements and cycle dynamics when integrating the chuck into existing cells or fixtures. Clear identification and traceability for production control Markings such as the SKU INT‑13‑NT40 and GTIN 4061905095634 allow easy inventory management and procurement workflows. The combination of identifiable product codes and a recognised manufacturer brand like Vertex supports quality tracking across batches and simplifies reordering within maintenance schedules or ERP systems. Clear identification reduces the risk of incorrect part selection in multi‑supplier environments. For reliable clamping with standard NT‑40 spindles choose the Vertex INT‑13‑NT40 — contact Metav Werkzeuge in Emmerich for tailored advice and technical information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: INT-13-NT40 GTIN: 4061905095634 Manufacturer: Vertex Facts Diameter: 50 mm Weight: 1.8 kg Taper: NT‑40 eClass: 21020490 ETIM: EC002125 Special features Integrated self‑tightening mechanism Designation: drill chuck, integrated and self‑tightening Category: Vertex Image file: int-8-mt2-main.jpg FAQ What spindle interface does the chuck use? The chuck is supplied with an NT‑40 taper interface; the INT-13-NT40 is intended for machine spindles accepting NT‑40 tooling. What clamping diameter is supported? The device features a 50 mm clamping diameter suitable for conventional drill shanks and common tooling used in general machining. How heavy is the chuck and what does that imply for tool changers? The unit weighs 1.8 kg; this mass offers good rigidity while remaining manageable for most automatic tool‑change systems and manual handling. Is the chuck identifiable for procurement and stock control? Yes — use the SKU INT-13-NT40 and GTIN 4061905095634 for ordering and inventory systems to ensure correct traceability. Who manufactures this drill chuck? The chuck is manufactured by Vertex; the product carries the brand and is intended to meet standard workshop and production requirements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Clamping BT‑40, 2 kg - Vertex
Take advantage of the combination of an integrated self‑tightening mechanism, compatibility with the common BT‑40 taper and a compact 50 mm clamping diameter to improve clamping reliability and reduce rework. Order via Metav Werkzeuge or consult the team for application support. Drill chuck (integrated, self‑tightening) INT-13-BT40 — BT‑40 interface, 50 mm clamping diameter (Vertex) The drill chuck INT-13-BT40 is a compact, integrated and self‑tightening toolholder designed for BT‑40 spindle interfaces and short-cycle production environments. Integrated self-tightening mechanism BT-40 taper for standard spindle interfaces 50 mm clamping diameter Robust construction, 2 kg weight Secure clamping that reduces downtime The integrated self‑tightening mechanism converts spindle torque into an automatic increase in clamping force, which improves grip under load and reduces the risk of tool slip. Designed as a compact toolholder, this solution helps maintain consistent concentricity and minimises radial play, supporting higher machining quality and longer tool life. Where precision is critical, fewer re‑clamps and less inspection are required, so machine uptime is increased and production becomes more predictable. Fast compatibility and straightforward installation Built for standard interfaces, the BT‑40 taper ensures straightforward insertion into compatible spindles without additional adaptors, enabling quick changeovers between operations. The specified 50 mm clamping diameter defines the maximum shank size accommodated directly, making selection clear for process planning. At roughly 2 kg, the assembly balances rigidity and manageable handling for maintenance staff, simplifying setup and replacement workflows on the shop floor. Durable build for workshop reliability Manufactured to support industrial use, the chuck offers a robust construction that withstands regular loading and the demands of repetitive drilling cycles. Produced by Vertex, the component is intended for integration into existing toolholding systems where secure, repeatable clamping is required. The combination of mechanical simplicity and sturdy design reduces service intervals and supports a consistent production output, aligning with quality‑centric procurement strategies. Choose the Vertex INT-13-BT40 drill chuck for dependable BT-40 toolholding and contact Metav Werkzeuge for tailored application advice and fast supply from our Emmerich warehouse Technical data SKU: INT-13-BT40 GTIN: 4061905088667 Manufacturer: Vertex Facts Clamping diameter: 50 mm Weight: 2 kg ECLASS: 21020490 ETIM: EC002125 Special features Integrated and self-tightening mechanism BT-40 spindle taper Designed for use as a drill chuck Short, compact body for tight toolstations FAQ What spindle taper does this chuck use? The chuck is supplied with a BT‑40 taper, enabling direct mounting to BT‑40 compatible spindles. Is the chuck self-tightening during operation? Yes, the integrated self‑tightening mechanism increases clamping force with spindle torque to improve grip under load. What clamping diameter is supported? This toolholder supports a maximum clamping diameter of 50 mm. How heavy is the assembly for handling and installation? The assembly weighs approximately 2 kg, providing a balance of rigidity and manageable handling for maintenance. Who manufactures this chuck and where is it suited for use? The chuck is manufactured by Vertex and is suitable for industrial workshop applications requiring repeatable, secure clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Clamping NT‑30 Taper - Vertex
Take advantage of the combination of secure clamping, compact NT-30 mounting and straightforward integration for reliable tool holding. Order the chuck directly via Metav Werkzeuge or consult our advisors for application-specific guidance. INT-13-NT30 integrated self-tightening drill chuck (NT-30 taper, 50 mm) The INT-13-NT30 is an integrated self-tightening drill chuck engineered for reliable tool clamping on machines with an NT-30 taper. *Integrated self-tightening mechanism *NT-30 taper for direct spindle mounting *50 mm clamping diameter for standard tools *Robust design, approx. 1.4 kg weight Consistent clamping that prevents tool slip The integrated self-tightening mechanism converts spindle torque into increased clamping force during rotation, which reduces the risk of tool slippage under load. This behaviour supports a steady machining process and contributes to improved cutting performance and repeatability. For operations that demand reliable tool retention, the design decreases downtime caused by re-tightening and reduces the likelihood of damaged tool shanks, helping to maintain throughput without compromise. Compact NT-30 mounting to reduce interfaces and error sources Mounting directly to an NT-30 spindle minimises the number of adapters and interfaces between machine and tool holder, which in turn improves concentricity and reduces run-out. Fewer interfaces mean fewer alignment variables, so the centreline accuracy of the rotating tool is preserved. The direct taper connection is particularly advantageous where space is limited or where consistent axial alignment is required for drilling and light reaming tasks. Practical capacity and robust build for everyday workshop use A 50 mm clamping diameter suits a wide range of common shank sizes used in general machining, enabling the chuck to accept standard tooling without additional collets. At approximately 1.4 kg, the unit combines a compact footprint with a solid feel that indicates a durable construction. The overall design supports frequent tool changes and daily use in production or maintenance settings, where robustness and predictable behaviour are essential. Integration advice and application scenarios The chuck is suitable for direct use on NT-30 spindle machines and can be selected where secure, self-tightening retention is preferred over manual tightening systems. In retrofit situations the direct taper mounting often simplifies installation and reduces accessory needs. For machines used in light-to-moderate drilling and tool-holding applications, this solution provides a balance of security, simplicity and mechanical reliability without unnecessary complexity. For integration guidance and to match this Vertex chuck to specific machine spindles, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: INT-13-NT30 GTIN: 4061905095627 Brand: Vertex Classification: ECLASS 21020490 / ETIM EC002125 Numeric data Clamping diameter: 50 mm Weight: 1.4 kg Design and special features Integrated self-tightening drill chuck NT-30 taper for direct spindle mounting Compact, robust construction FAQ What is the primary advantage of the integrated self-tightening mechanism? The integrated self-tightening function increases clamping force during spindle rotation, so the INT-13-NT30 drill chuck secures the tool more firmly under cutting load, reducing slippage. Which spindle taper is compatible with this chuck? This chuck is designed for machines with an NT-30 taper, allowing direct mounting without additional adapters for improved concentricity. What clamping range does the chuck support? The chuck offers a 50 mm clamping diameter suitable for many standard tool shanks commonly used in workshop drilling and light machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Clamping, JC‑20 Taper - Vertex
Secure, integrated self‑tightening clamping combined with a JC‑20 Jacobs taper and a 50 mm diameter provides stable drilling and reliable spindle mounting; this results in reduced slippage and consistent hole quality. Order the INT-13-JC20 drill chuck directly via Metav Werkzeuge or ask the consultants for compatibility guidance and delivery options. INT-13-JC20 Drill Chuck — JC‑20 Jacobs taper, 50 mm, Vertex The INT-13-JC20 is an integrated, self‑tightening drill chuck designed for secure clamping and easy mounting on spindles with a JC‑20 taper, suitable for light to medium machining tasks Integrated self‑tightening clamping mechanism JC‑20 Jacobs taper for direct spindle mounting 50 mm outer diameter for larger drill shanks Robust 1.4 kg construction for stable machining Stable clamping that reduces rework and increases uptime The integrated self‑tightening mechanism ensures that the clamping force increases with spindle torque, so the toolholder remains secure during drilling operations. This behaviour reduces the risk of bit slippage and workpiece damage, translating directly into fewer rejects and lower rework costs. Compatibility with a JC‑20 Jacobs taper means a simple, reliable interface to many light‑duty spindles; the taper provides accurate axial location and repeatable concentricity, which supports tighter hole tolerances and consistent process results. Easy integration into the workshop and straightforward mounting With a clear focus on workshop compatibility, the chuck's 50 mm outer diameter accommodates larger shank sizes while the 1.4 kg mass helps maintain rotational stability during plunge cuts. The compact, integrated design simplifies setup and reduces the number of separate components carried in the tool trolley, improving process flow. Because the mounting form is a standard Jacobs taper, retrofitting to existing machines is typically direct, shortening downtime for changeovers and streamlining production scheduling. Low maintenance design for reliable daily use The construction is engineered for straightforward operation and minimal upkeep: few moving parts and an integrated body limit contamination points and reduce service intervals. Routine checks and simple lubrication preserve clamping performance and contribute to predictable tool life cycles. These maintenance characteristics support higher throughput by lowering unexpected stoppages and keep labour for servicing to a minimum, so production planners can rely on steady machine availability. Suitable users and demonstrable benefits on the shop floor Precision toolrooms, small production lines and maintenance departments gain immediate benefit from a robust, self‑tightening chuck that improves drilling consistency without complex setup. The device is particularly relevant where repeatability and secure clamping influence final part quality. For operations seeking a balance between robust mechanical performance and simple handling, this chuck delivers measurable improvements in process reliability and operator confidence. For assured clamping performance and fast advice on spindle compatibility, contact Metav Werkzeuge to arrange procurement of the Vertex INT-13-JC20 drill chuck or to request tailored technical guidance from our Emmerich team. Technical data Article number: INT-13-JC20 GTIN: 4061905093074 ETIM: EC002125 eClass: 21020490 Facts Weight: 1.4 kg Outer diameter: 50 mm Taper: JC-20 Special features Integrated and self‑tightening design Product type: Drill chuck Manufacturer: Vertex FAQ What taper does the chuck use and how does it mount to the spindle? The INT-13-JC20 uses a JC‑20 Jacobs taper; the Jacobs taper enables direct mounting to compatible spindles for accurate axial location and repeatable concentricity. Which shank sizes are compatible with this chuck? The chuck's 50 mm outer diameter accommodates larger drill shanks and is suitable for a range of standard drill shank sizes when combined with the appropriate arbor or taper interface. How does the self‑tightening feature affect tool changes? The self‑tightening mechanism increases clamping force under torque, improving security during operation; tool changes remain straightforward thanks to the integrated design and standard taper mounting. Is the chuck suitable for heavy industrial drilling? This chuck is designed for light to medium machining tasks where a JC‑20 taper interface is appropriate; for high‑torque or heavy industrial applications, a heavier‑duty spindle and chuck combination should be considered. Who manufactures the product and what is the SKU for ordering? This drill chuck is manufactured by Vertex and is listed as SKU INT-13-JC20 for ordering and technical reference. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Holding BT‑50 Taper - Vertex
Take advantage of the proven combination of integrated self-tightening functionality and BT-50 taper compatibility to secure reliable clamping and shorter setup times in high-performance machining. Order the unit directly via Metav Werkzeuge or consult the team for application-specific advice. Drill Chuck INT-13-BT50 — Integrated self-tightening, BT-50 taper (Vertex) The drill chuck INT-13-BT50 is an integrated, self-tightening chuck designed for BT-50 taper spindles, offering secure tool clamping for demanding milling and drilling applications. Integrated self-tightening mechanism BT-50 taper for heavy-duty spindles 50 mm capacity for versatile tooling Solid construction, mass approx. 4.7 kg Reliable clamping that reduces rework The integrated self-tightening design delivers consistent clamping force during machining, reducing axial play and the need for repeated adjustments. This stability translates into fewer rejected parts and lower rework rates, because tools are held securely under cutting loads. The chuck’s constructive mass contributes to vibration damping, which supports precision and surface quality in both intermittent and continuous operations. Designed for BT-50 spindles to simplify integration Compatibility with the BT-50 taper enables straightforward integration into machines that use this standard, allowing a smooth changeover between toolholders without additional adapters. The taper interface ensures accurate axial and radial alignment, which helps maintain concentricity and repeatability during high-speed rotation. For workshops standardising on BT-50, this chuck provides a direct route to reliable and repeatable toolholding. Versatile capacity for common machining tasks With a nominal 50 mm capacity, the chuck accommodates a wide range of twist drill shanks and straight-shank tooling used in heavy milling and drilling operations. That versatility reduces the need for multiple specialised holders, streamlining tooling inventories and setup complexity. The functional design focuses on delivering dependable grip for commonly used tool dimensions in industrial environments. Robust build for demanding production environments Weighing approximately 4.7 kg, the chuck exhibits the mass and rigidity expected for production-grade toolholding. The construction supports steady operation under load and contributes to thermal and mechanical stability during longer cycle times. Built for repetitive throughput, the unit aligns with workshop workflows that demand consistent performance and low maintenance interruption. Contact Metav Werkzeuge for compatibility checks or to request tailored advice on the Vertex drill chuck INT-13-BT50 and its suitability for specific BT-50 spindles Technical Data Article number: INT-13-BT50 GTIN: 4061905088476 ECLASS: 21020490 ETIM: EC002125 Manufacturer: Vertex Facts Weight: 4.7 kg Diameter: 50 mm Taper: BT-50 Special features Integrated and self-tightening mechanism Compatible with BT-50 taper spindles Robust mass for stable clamping FAQ What spindle standard does the chuck support? The Vertex drill chuck INT-13-BT50 is designed for the BT-50 taper, ensuring compatibility with machines that accept BT-50 toolholders. Is the clamping mechanism manual or automatic? The unit features an integrated self-tightening mechanism, allowing it to maintain clamping force during machining without continuous manual retightening. What is the maximum diameter or capacity of the chuck? The chuck offers a nominal capacity of 50 mm, suitable for a range of straight-shank and twist-drill tooling common in industrial operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Holding, Ø0.5–13mm Capacity - Vertex
Reliable clamping performance and a compact design make this drill chuck an efficient choice for precise small-diameter drilling tasks; its integrated self-tightening mechanism and broad tool capacity ensure firm grip and straightforward installation. Order the Vertex SK40-VRL13 drill chuck directly via Metav Werkzeuge or ask our consultants if needed. Vertex SK40-VRL13 drill chuck — integrated self-tightening, Ø0.5–13 mm capacity The SK40-VRL13 drill chuck is a compact, self-clamping chuck designed for machine-tool and workshop applications where secure holding of small-diameter drills is required. Integrated self-tightening mechanism Capacity Ø0.5–13 mm 50 mm body diameter M16 threaded mount 85 mm overall length Consistent, concentric clamping for small tools The SK40-VRL13 functions as a precision drill chuck tailored to small-diameter tooling, offering a reliable grip for drills from Ø0.5–13 mm. The self-tightening mechanism converts spindle torque into a firmer bite on the tool shank, which supports concentric clamping and helps maintain tool stability during operation. This results in fewer interruptions for re-clamping and a lower risk of slippage, which is especially valuable when handling delicate or fine-diameter drills in serial or maintenance work. Compact form factor for simple integration With a 50 mm body diameter and an 85 mm overall length, the chuck presents a compact profile that suits a variety of spindle arrangements and limited-clearance applications. The M16 thread provides a standardised interface for many adaptors and holders, easing installation into existing setups without extensive modification. As a result, machine rooms and toolrooms benefit from a space-efficient component that simplifies retrofitting and reduces downtime during changeovers. Practical choice for workshop and light production use Designed for routine workshop requirements, the chuck delivers dependable holding power for production support, repair tasks and precision drilling operations. The combination of a broad clamping range and an integrated tightening function reduces handling steps and supports consistent hole quality across batches. Paired with Metav’s logistics and product range, the unit suits professionals seeking dependable components that integrate smoothly into established workflows. For dependable clamping in precision workshop tasks, choose the Vertex SK40-VRL13 — contact Metav Werkzeuge in Emmerich for ordering and compatibility advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SK40-VRL13 GTIN: 4061905083556 ETIM: EC002125 eClass: 21020490 Facts Diameter: 50 mm Length: 85 mm Capacity: Ø0.5–13 mm Thread: M16 Special features Integrated self-tightening mechanism Model type: drill chuck Brand: Vertex FAQ Is this chuck suitable for small-diameter drills and bits? The SK40-VRL13 drill chuck by Vertex is specified for tool diameters from Ø0.5–13 mm, making it suitable for a wide range of small-diameter drills and bits used in workshop and toolroom operations. What mounting interface does the chuck use? The unit features an M16 threaded mount and a compact 50 mm body diameter; these characteristics allow straightforward attachment via common adaptors to compatible spindles and holders. How does the self-tightening mechanism affect tool holding? The integrated self-tightening mechanism on the Vertex SK40-VRL13 increases clamping force with spindle torque, promoting a secure, concentric hold and reducing the likelihood of tool slippage during drilling cycles. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Drill Chuck Integrated Self‑Locking MT‑2 Taper - Vertex
Benefit from a robust mounting solution that pairs an integrated, self‑tightening jaw system with a MT‑2 Morse taper and a generous 50 mm capacity; its solid 1.3 kg mass adds stability for repeatable results. Order the INT-13-MT2 directly via Metav Werkzeuge or ask our consultants for compatibility advice. INT-13-MT2 drill chuck – integrated self‑tightening, MT‑2 taper (Ø 50 mm) | Vertex The INT-13-MT2 drill chuck is an integrated, self‑tightening chuck with an MT‑2 Morse taper that provides a secure, compact mounting solution for machines with compatible spindles. Integrated self-tightening design MT-2 Morse taper for secure mounting 50 mm chuck diameter for versatile tools Robust construction, weight 1.3 kg Secure mounting for repeatable accuracy The combination of a Morse taper seating and an internal, self‑tightening jaw mechanism delivers a reliable clamping interface that reduces slippage under load and supports precision drilling. The MT‑2 taper ensures a rigid connection between spindle and chuck, which translates into improved concentricity and fewer rejected parts. With a 50 mm capacity the chuck accepts larger shank sizes, enabling the use of more substantial tooling without compromising clamping force. These features directly contribute to consistent results and reduced rework in production environments. Stability that supports higher process reliability A mass of 1.3 kg increases the chuck’s inertia, which helps dampen vibration during cutting and drilling operations and thus promotes better surface finish and longer tool life. The unit’s compact but sturdy design reduces the likelihood of chatter on medium-duty machine tools fitted with an MT‑2 socket. Fewer interruptions and less corrective work help streamline workshop throughput: the result is more reliable cycle times and a tangible uplift in operational efficiency for repetitive machining tasks. Easy integration and low-maintenance operation The integrated jaw and self‑tightening function simplify routine use: tightening occurs as the spindle rotates, cutting down on manual adjustments and the need for frequent re‑clamping. Installation requires only a compatible MT‑2 socket, making retrofitting straightforward for many drill presses and spindles. The design focuses on durability and uncomplicated upkeep, offering a pragmatic balance between performance and serviceability that supports continuous shop-floor operation. Contact Metav Werkzeuge for tailored advice on Vertex MT‑2 chucks and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: INT-13-MT2 GTIN: 4061905090684 Manufacturer: Vertex ECLASS: 21020490 ETIM: EC002125 Core specifications Diameter: 50 mm Weight: 1.3 kg Taper: MT-2 Special features Integrated and self-tightening Morse taper mounting Self-clamping jaw mechanism FAQ What taper does this chuck use? The INT-13-MT2 drill chuck uses an MT‑2 Morse taper for spindle mounting. What maximum shank diameter can be clamped? The chuck accepts tooling up to 50 mm in diameter, as stated in the core specifications. Is the clamping mechanism keyless or keyed? The unit features an integrated, self‑tightening jaw system that reduces the need for a separate key during operation. How much does the chuck weigh? The chuck has a weight of 1.3 kg, contributing to improved stability in use. Can this chuck be fitted to standard MT‑2 sockets? Yes — the design is intended for direct fitment into standard MT‑2 sockets on compatible machines. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm ER 16 Collet Set 1–10mm Clamping Range 5 µm Runout Accuracy, Wooden Case - TECWERK
Take advantage of precise clamping across a wide range and the organised storage that reduces setup times; the combination of 5 µm runout, a 1–10 mm clamping range and a wooden holder supports consistent production. Order the collet set directly via Metav Werkzeuge or contact the consultants for tailored advice. TECWERK ER16 Collet Set (426 E) — 1–10 mm, 10-piece The TECWERK ER16 collet set (426 E) provides reliable clamping for ER16 collet chucks in workshop and light production environments. Wooden holder for secure storage Compatible with ER16 collet chucks Runout and repeatability 5 µm Clamping range 1–10 mm in 1 mm steps Precision clamping for repeatable production The collet set is designed to deliver consistent clamping across standard ER16 tooling, reducing rejects and rework. With a 1–10 mm clamping range in single-millimetre increments, the set covers common small-tool requirements while keeping changeover quick. The documented runout and repeatability figure of 5 µm indicates the set is suitable where fine positional accuracy is necessary; this translates into reduced vibration, improved surface finish and predictable tool life. The specification supports decision-making for machining tasks that demand tight tolerances. Compatibility and practical fitment with existing spindles Designed for use with ER16 collet chucks, the set ensures straightforward integration into existing clamping systems. ER16 is a widely adopted standard for small-diameter tooling, so compatibility minimises additional investment. The collets accommodate standard ER16 toolholders and adapters, allowing uninterrupted workflow when switching between drills, reamers or small milling cutters. The construction and dimensional conformity are intended to maintain the chuck’s concentricity and to preserve spindle bearings by avoiding misalignment. Organised storage that saves setup time Supplied in a wooden holder, the set promotes neat organisation at the bench and protects the collets from damage and contamination when not in use. Clear arrangement of the individual sizes reduces search time during tool changes and supports efficient toolroom routines. The compact footprint of the holder fits shop shelving or tool trolleys, helping to keep workstations tidy and minimising handling damage that can compromise precision. Understandable technical performance for everyday use A nominal runout of 5 µm means the assembly maintains very low eccentricity under normal operating conditions; in practice, this reduces wobble on small-diameter tools and helps achieve repeatable hole and profile geometries. For users less familiar with metrology terms, runout is the lateral deviation of the tool axis under rotation, while repeatability reflects the ability to return to the same clamped position after repeated operations. These metrics are important when machining small features or when tool life and surface quality are priorities. Who benefits and how to integrate the set into workflows Workshops, prototyping labs and small-series production that rely on precise small-diameter machining will find the set useful for daily operations. The kit’s organisation and ER16 compatibility make it a practical choice for maintenance teams and machinists who require dependable clamping without complex upkeep. For processes where reproducible results are essential, the set reduces variability and supports consistent output, complementing broader quality controls and inspection procedures. Secure the TECWERK ER16 collet set via Metav Werkzeuge for reliable small-diameter clamping — available from Metav Werkzeuge in Emmerich; enquiries by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 are welcome. Technical data Article number: 2000832780NW Type: ER 16 (426 E) Product: Collet set Manufacturer: TECWERK UID: 2000832780NW Core specifications Clamping range: 1–10 mm Dimensions: 50 x 25 x 130 mm Runout and repeatability: 5 µm Contents: 10 pieces Packaging unit: 1 Special features Wooden holder for storage Compatible with ER16 collet chucks Height: 25 mm Width: 50 mm Length: 130 mm Supply: collets 1–10 (1 mm steps) Model: ER 16 (426 E) FAQ What is included in the set? The set contains ten ER16 collets covering sizes 1–10 mm and is supplied in a wooden holder for organised storage; refer to SKU 2000832780NW for exact details. Can the collets be used with any ER16 chuck? Yes, the collets are made for ER16 systems and are compatible with standard ER16 collet chucks used in small spindle and milling applications. How significant is the 5 µm runout specification? A runout and repeatability of 5 µm indicates low eccentricity and good positional stability, which benefits surface finish and tool life when using small-diameter tooling. Is the set suitable for production environments? The ER16 collet set from TECWERK is suited to workshops and small-series production where reproducible clamping and quick changeovers are needed. Does the set include a storage solution? Yes, the collets are supplied in a wooden holder to protect components and simplify tool organisation. What is the model designation to order? Order as TECWERK ER16 Collet Set (426 E), SKU 2000832780NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm ER 32 Collet Nut Gearing M40 x 1.5, Balanced Sliding Bearing - TECWERK
Balanced sliding-bearing design and a balanced execution combine to deliver secure clamping with reduced vibration; the M40 x 1.5 thread offers direct compatibility with ER 32 collet systems. Order the part via Metav Werkzeuge or consult the technical team for precise application advice. ER 32 clamping nut D 50 mm (sliding-bearing) – TECWERK The ER 32 clamping nut D 50 mm is a sliding-bearing, balanced clamping component designed for use with ER collet chucks in precision machining and toolholding assemblies. Sliding-bearing design for smooth clamping Balanced execution for high-speed compatibility Thread M40 x 1.5 for ER 32 systems Diameter 50 mm matched to ER 32 collets Reduced vibration and consistent clamping for precise machining The TECWERK ER 32 clamping nut is engineered to provide consistent axial clamping force while minimising runout. The combination of a sliding-bearing configuration and a balanced construction reduces vibration during rotation, which in turn helps to maintain tool life and surface finish. The clearly specified thread M40 x 1.5 and the 50 mm diameter make the component a straightforward replacement or upgrade in existing ER 32 toolholding setups; this ensures compatibility without altering the collet system. Reduced vibration and better dynamic behaviour are decisive benefits for repeatable results in production environments. Reliable fit and straightforward installation for workshop efficiency Designed for straightforward integration into standard collet chuck systems, the clamping nut offers a dependable mechanical interface for ER-style collets. The sliding-bearing design means the contact surfaces are optimised for smooth relative movement, which often translates to lower fretting and more uniform torque transmission during tightening. For maintenance routines, the construction supports predictable wear characteristics, so service intervals can be planned rather than reactive. Because the part is made to match ER 32 dimensions and DIN guidance, downtimes connected to thread or diameter mismatches are avoided, supporting continuous workshop throughput. Suited to demanding toolholding applications with clear sourcing This component is suitable where runout control and dynamic balance matter, such as high-speed milling or precision drilling operations that use ER collet chucks. The balanced execution reduces centrifugal forces that otherwise increase the mechanical load on bearings and spindle interfaces, supporting longer operational life for both tools and machines. For procurement and quality assurance, Metav’s position as a European quality filter ensures that components sourced through the distributor meet consistent standards; this reliability supports production planning and supplier consolidation strategies in industrial and trade settings. Contact Metav Werkzeuge to arrange delivery or to discuss TECWERK ER 32 clamping nuts and application details—phone or email for availability and lead-time clarification. Technical data Article number: 2000834000NW Product: ER 32 clamping nut, sliding-bearing Manufacturer: TECWERK Core data Diameter: 50 mm Thread: M40 x 1.5 Suitable for: ER 32 Packaging unit: 1 SKU: 2000834000NW Special features Sliding-bearing execution Balanced execution Compatible with ER collet chuck According to DIN 6499 FAQ What thread and diameter does this clamping nut use? The clamping nut uses an M40 x 1.5 thread and a 50 mm diameter, matched to ER 32 collet dimensions for direct assembly into standard ER 32 toolholding systems. Is the nut suitable for high-speed machining? Yes. The balanced execution reduces rotational imbalance, making the nut suitable for applications where improved dynamic behaviour and reduced vibration are required. How does the sliding-bearing design benefit clamping performance? The sliding-bearing execution provides smoother relative movement at the contact surfaces, which helps to distribute forces more evenly and can reduce localized wear while supporting consistent clamping torque. Will this part fit existing ER 32 collet chucks? The component is specified for ER 32 and manufactured to fit ER 32 collet chucks in accordance with the stated dimensional guidance, enabling straightforward replacement or integration. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm ER Collet Chuck 2-20mm Clamping Range, DIN 69871 Form AD - TECWERK
Benefit from a combination of stable SK40 interface, precise ER32 clamping and a practical 100 mm projection for reliable machining operations; the 2–20 mm clamping range makes the chuck adaptable across common tool sizes. Order the chuck directly via Metav Werkzeuge or consult their specialists for spindle compatibility and application advice. Spannzangenfutter ER DIN 69871AD – TECWERK ER collet chuck, SK40, 2–20 mm clamping range The Spannzangenfutter ER DIN 69871AD is a SK40 collet chuck designed for secure clamping of cylindrical-shank tools in machining centres and milling spindles. *DIN 69871 Form AD compatibility *SK40 taper for high rigidity *Clamping range 2–20 mm versatility Precision and rigidity that support tight tolerances The TECWERK collet chuck is built to the DIN 69871 Form AD standard, providing a steep taper that increases axial support and reduces deflection during cutting. With a SK40 interface and a 100 mm projection, the holder maintains precision over extended reaches. These mechanical properties convert into consistent concentricity and repeatability, which are essential when machining to tight tolerances or working with fine finishing operations. Versatile clamping for a wide range of tools Engineered around an ER32 collet system, the toolholder covers a 2–20 mm clamping range, enabling one holder to serve a broad spectrum of cylindrical-shank cutters and drills. Compatibility with collets made to DIN 6499 simplifies tool inventory and allows rapid tool changes without compromising concentricity. The result is efficient setup times and fewer holders required for mixed production runs. Seamless integration with standard spindles and setups The holder’s interface is specified for common machine tapers and includes the listing Aufnahme: ER 32 / 470 E 1, making it straightforward to fit into conventional SK40 spindles. The clearly defined dimensions — projection A: 100 mm and body D: 50 mm — assist in workspace planning and collision checks. This compatibility means straightforward retrofits and predictable behaviour across different machines and fixtures. Robustness and workshop practicality for everyday use Manufactured for industrial workshop conditions, the chuck offers practical durability while remaining serviceable: routine inspection of the collet seat and cleaning of the taper preserve toolholding performance over time. The compact body and defined interface minimise handling complexity and support a tidy tooling configuration. As a product from TECWERK, it is intended for machinists and workshops that prioritise dependable clamping under continuous operation. For a tailored recommendation on spindle fitment or to secure the TECWERK ER collet chuck for production use, contact Metav Werkzeuge for direct assistance and technical consultation. Technical data Article number: 2000833712NW Manufacturer: TECWERK Product type: ER collet chuck Facts Clamping range: 2–20 mm Diameter: 50 mm Projection A: 100 mm Projection length D: 50 mm Interface: SK40 Special features Standard: DIN 69871 Form AD Collet size: ER32 For tools with cylindrical shank to DIN 6499 Aufnahme: ER 32 / 470 E 1 Packing unit: 1 FAQ What is the clamping range of the Spannzangenfutter ER DIN 69871AD? The clamping range is 2–20 mm, using ER32 collets suitable for a broad set of cylindrical-shank tools. Is this chuck compatible with SK40 spindles? Yes, the holder uses a SK40 taper and is manufactured to DIN 69871 Form AD for direct integration with standard SK40 spindles. Which collet standard should be used with the chuck? Collets to DIN 6499 (ER32) are the recommended choice for correct seating and concentric clamping with this TECWERK collet chuck (SKU 2000833712NW). What are the key dimensions to check for workspace clearance? Key dimensions: projection A = 100 mm and body diameter D = 50 mm; these values help plan reach and avoid collisions. Can the chuck be used for high-precision finishing operations? Yes, the steep taper specified by DIN 69871 Form AD and the ER32 system support high concentricity and repeatability appropriate for finishing passes. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm ER Collet Chuck DIN 69871 Form AD 2-20mm Clamping Range, SK40 A.70mm - TECWERK
Take advantage of a proven DIN taper and a broad clamping range for consistent concentricity and fast tool changes; order directly via Metav Werkzeuge or consult the team for specification matching. ER collet chuck DIN 69871 Form AD (SK40, ER32) – 2–20 mm clamping range A ER collet chuck DIN 69871 Form AD designed for secure clamping of cylindrical-shank tools in ER collets to DIN 6499, fitted to SK40 spindles for general machining applications DIN 69871 Form AD taper Clamping range 2–20 mm ER32 SK40 toolholder interface 70 mm projection, 50 mm diameter Consistent concentricity for precise machining The ER collet chuck DIN 69871 Form AD delivers repeatable toolholding by combining the standardised DIN 69871 taper with an ER collet system. The steep taper ensures axial rigidity and reliable seating in the spindle, which improves run-out behaviour and reduces vibration during milling or drilling. By converting standard collet clamping into a uniform interface, the holder supports high-precision tool engagement and predictable tool life — a tangible benefit where repeatability and surface finish are priorities. Faster set-up and broad tooling compatibility With a clamping range of 2–20 mm and compatibility with ER32 collets to DIN 6499, the chuck accommodates a wide variety of cylindrical shank cutters and drills without frequent tooling changes. This flexibility shortens set-up times and streamlines changeovers on batch work or mixed production runs. The ER system centres the tool within the collet for stable clamping force, which reduces slippage and makes it simple to maintain concentricity when swapping cutters of different diameters. Robust dimensions for shop-floor reliability Built with a projection of A: 70 mm and an outer D: 50 mm diameter, the holder provides a balanced combination of reach and stiffness for common machining tasks. The SK40 interface offers secure coupling to common toolholders, while the overall geometry supports consistent axial positioning of the tool. Manufactured to industry standards, the design promotes low-maintenance operation and predictable performance across repeated cycles — an advantage for workshops that value dependable throughput and a steady supply of precision components. For tailored advice on integrating this TECWERK ER collet chuck into existing SK40 setups, contact Metav Werkzeuge for technical guidance and to secure the correct specification. Email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000833711NW Product type: ER collet chuck Norm: DIN 69871 Form AD Mounting: ER 32 / 470 E Core technical data Clamping range: 2–20 mm Collet size: ER32 Interface: SK40 Projection A: 70 mm Outer diameter D: 50 mm Special features Steep taper to DIN 69871 Form AD For clamping cylindrical shank tools to DIN 6499 Standardised toolholder interface for stability FAQ What clamping diameters does the chuck accept? The clamping range is 2–20 mm, compatible with ER32 collets for a wide variety of cylindrical shank tools. Which spindle interface is required for this holder? The holder fits an SK40 toolholder interface and seats to the DIN 69871 Form AD taper. Is this suitable for standard ER collets to DIN 6499? Yes, the design is intended for ER collets manufactured to DIN 6499 and is specified for use with ER32. What are the key dimensions to check for machine compatibility? Relevant dimensions are projection A = 70 mm and outer diameter D = 50 mm; confirm these against the machine envelope. Which SKU and brand identify this product? This item is supplied as TECWERK ER collet chuck, SKU 2000833711NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm ER Nut Clamping Collar With Eccentric Ring M40 x 1.5, Balanced DIN 6499 - TECWERK
Take advantage of the combination of a balanced design, an eccentric ring and standard M40 x 1.5 threading to ensure secure, concentric clamping for ER collet chucks; order directly via Metav Werkzeuge or consult the Metav specialists for application advice. ER 32 clamping nut with eccentric ring – D 50 mm by TECWERK The ER32 clamping nut with eccentric ring is a standard-design clamping component for ER collet chucks, providing stable, balanced fastening and compatibility with DIN 6499 systems. Standard design with eccentric ring Suitable for ER 32 collet chucks Thread M40 x 1.5 for secure fastening Diameter 50 mm, balanced execution Reliable clamping for consistent machining The balanced execution and the integrated eccentric ring reduce runout and support repeatable concentricity, which is essential for precision tasks. With the M40 x 1.5 thread and a nominal 50 mm diameter, this clamping nut secures ER collets reliably, contributing to stable toolholding and fewer reworks. Conformity with DIN 6499 indicates dimensional compatibility with established ER collet systems, so maintenance of concentricity becomes a measurable production benefit rather than an uncertainty. Seamless integration into ER collet systems Designed for compatibility with ER 32 collet chucks, the component fits directly into standard collet assemblies and simplifies retrofit or replacement procedures. The eccentric ring permits fine compensation for minor misalignment, helping to maintain concentric clamping without complex adjustments. For workshops and small production lines this means quicker set-ups and improved process stability, while service engineers benefit from straightforward interchangeability when aligning spindles or replacing worn components. Quality-filtered supply and workshop-focused service Sourced under the TECWERK designation and supplied via Metav Werkzeuge, the part is backed by a distribution approach that emphasises availability and traceable quality. Metav’s Emmerich hub acts as a quality filter for the European market, supported by an extensive range of precision tools and workshop equipment. This supply chain reliability reduces downtime risk and allows procurement teams to consolidate suppliers while keeping precision accessible for everyday workshop demands. Contact Metav Werkzeuge for tailored application advice and secure the balanced ER 32 clamping nut for improved concentricity and process reliability – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000833996NW Manufacturer: TECWERK Product: ER clamping nut Facts Thread: M40 x 1.5 Diameter: 50 mm Suitable for: ER 32 Package unit: 1 Special features Standard design with eccentric ring Balanced execution, compliant with DIN 6499 For ER collet chucks FAQ Which collet size is this clamping nut designed for? The clamping nut is intended for ER 32 collet chucks and fits collets specified for ER 32 applications. What are the thread and nominal diameter of the part? The component features an M40 x 1.5 thread and a 50 mm diameter; reference SKU 2000833996NW for ordering. Is the nut balanced and to which standard does it conform? Yes, the nut is supplied as a balanced execution and is dimensionally compatible with DIN 6499. Can this clamping nut be used at elevated spindle speeds? The balanced design supports use at higher operational speeds typical for ER systems; final suitability depends on the spindle and collet chuck specifications. Is the eccentric ring adjustable and what is its purpose? The eccentric ring is incorporated to help compensate minor misalignment and assist in achieving concentric clamping when assembling ER collet systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm ER-32 Collet Chuck High-Precision Clamping, 3.1kg - Vertex
Take advantage of the combination of reliable ER-32 clamping, compact Ø50 mm sizing and robust workshop durability to keep set-up times short and production consistent. Order the V-106 collet chuck directly via Metav Werkzeuge or consult our advisors if further specification is required. V-106 Collet Chuck (ER-32, Ø50 mm) by Vertex A V-106 collet chuck for secure, high-precision clamping in milling and turning applications, suited to standard ER-32 tooling ER-32 taper for standard collets 50 mm outer diameter for compact mounting High-precision clamping for concentricity Robust construction, weight 3.1 kg Consistent precision that reduces rework The V-106 is engineered as a compact collet chuck delivering repeatable precision for routine machining tasks. The ER-32 taper provides a standardised interface for ER collets, ensuring reliable radial clamping and improved run-out compared with loose-tool solutions. This reduction in eccentricity translates directly into fewer rejected parts, longer tool life and a more predictable production flow. For operations where tolerance adherence is critical, the combination of standard collet compatibility and a compact 50 mm footprint supports quicker set-ups and consistent part quality. Compatibility and dynamics tuned for workshop use Designed around the widely used ER-32 system, the chuck integrates smoothly with existing spindle interfaces and collet sets, reducing the need for additional adapters. The moderate mass of 3.1 kg provides a balance between rigidity and rotational dynamics; this weight contributes to stable cutting performance while remaining manageable for standard tool changes. For users unfamiliar with ER collets: the system clamps radially around the tool shank, creating uniform grip and minimising slipping under load. The result is a pragmatic combination of ease of use and operational stability. Durable design that keeps machines productive Manufactured by Vertex to workshop-grade standards, the chuck features a solid construction intended for repeated cycles and daily handling. Robust materials and a straightforward geometry mean low maintenance requirements and a lower risk of performance degradation over time. As a result, downtime for chuck-related issues is reduced, and maintenance routines stay simple—supporting continuous output in busy production environments. Where traceable reliability is required, the V-106’s consistent behaviour under load provides a trustworthy foundation for both small-series and repeat production. For secure clamping with the Vertex V-106 and tailored advice on integration, contact Metav Werkzeuge for precise product guidance and dependable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data SKU: V-106 GTIN: 4061905087103 Brand: Vertex Eclass: 21020405 Core specifications Diameter: 50 mm Taper: ER-32 Weight: 3.1 kg Materials & features Standard ER collet compatibility Compact outer dimension for tight setups Workshop-grade construction FAQ What collet standard does this chuck use? The V-106 collet chuck uses the ER-32 standard, compatible with ER-32 collets for radial clamping. Can the chuck be used on different machines? Compatibility depends on the spindle interface; the V-106 is intended for spindles and adaptors that accept an ER-32 taper and compact Ø50 mm mounting. How does the V-106 affect machining accuracy? The Vertex V-106 improves concentricity and reduces run-out compared with unsecured toolholding, helping to lower scrap rates and extend cutter life. Is the chuck heavy to handle during tool changes? At around 3.1 kg, the V-106 balances rigidity and manageability for standard workshop tool changes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com