Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
50mm ER-32 Collet Chuck With Steep Taper For ER Collets - Vertex
Compact, precise clamping for ER‑32 collets and a sturdy 50 mm body combine to deliver consistent seating and reliable concentricity; fast enquiries are handled directly by Metav Werkzeuge — order the V‑745 collet chuck via Metav or consult their specialists for application advice. V-745 collet chuck with steep taper for ER‑32 collets, 50 mm diameter — Vertex The V-745 collet chuck is a compact clamping solution with a steep taper, designed to accept ER‑32 collets for precision clamping in workshop and production environments. Secure seating for ER‑32 collets Steep taper for positive clamp 50 mm body diameter Consistent clamping for precision machining A robust collet chuck design with a steep taper promotes repeatable, concentric seating of ER‑type collets, which supports reliable tool alignment during operations. The combination of taper geometry and collet compatibility reduces the need for frequent retuning, translating technical stability into measurable production benefits. With a compact 50 mm body diameter the unit balances rigidity and accessibility, helping to maintain cutting accuracy where consistent concentricity is required. Integration with standard ER‑collet tooling Designed for compatibility with ER‑32 collets, the chuck fits seamlessly into common clamping workflows and tooling stacks. Its form factor simplifies replacement of worn holders and allows straightforward interchange with existing ER systems without adapting collets or mandrels. This compatibility reduces setup complexity and supports efficient tool changeovers, preserving machine uptime and minimising process interruptions. Practical advantages for the workshop environment The modest mass of the chuck (approx. 1.2 kg) makes handling and installation straightforward while still providing sufficient mass for stable clamping in many light to medium machining tasks. Built by Vertex, the unit is suitable as a standard clamping element in benches and machining centres where dependable repeatability and quick collet changes are required. For buyers seeking a balance of handling ease and secure clamping, the compact form and ER‑32 compatibility offer a practical, industry‑aligned solution. For tailored advice on integrating the Vertex V‑745 collet chuck into existing setups, contact Metav Werkzeuge in Emmerich for application guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support Technical data Article number: V-745 GTIN: 4061905087721 Manufacturer: Vertex Facts Diameter: 50 mm Weight: 1.2 kg Collet series: ER-32 Special features Steep taper for ER collets Compatible with ER-32 collets Compact clamping body FAQ Which collets fit this chuck? The V‑745 collet chuck is designed for use with standard ER‑32 collets manufactured to established ER specifications. What is the body diameter and how does it affect rigidity? A 50 mm body diameter increases the stiffness of the clamping assembly, helping the V‑745 to maintain stable clamping and support consistent concentricity. How heavy is the unit? The chuck has an approximate weight of 1.2 kg, offering a balance between ease of handling and sufficient mass for steady clamping. Is the chuck suitable for precision clamping tasks? The steep taper and ER‑32 compatibility of the V‑745 contribute to repeatable seating and dependable concentricity, making it appropriate for many precision clamping applications. How can the product be identified for ordering? Identify the product by SKU V‑745 or GTIN 4061905087721; the manufacturer is Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm ER-32 Collet Chuck, High-Precision Clamping - Vertex
Take advantage of precision clamping and a compact, lightweight design to improve setup consistency and spindle efficiency; the ER-32 taper and 50 mm form factor make this collet chuck a reliable choice for standard toolholding tasks. Order the unit directly via Metav Werkzeuge or contact the team for application advice. V-101 collet chuck — ER-32, 50 mm diameter, precision clamping The V-101 is a precision collet chuck designed for secure toolholding in milling and turning setups, featuring an ER-32 taper for broad compatibility with standard collets Precision ER-32 taper for secure clamping 50 mm outer diameter for compact toolholding Lightweight design, approx. 0.7 kg Rapid dispatch from Metav Werkzeuge stock Consistent clamping that reduces rework and downtime The ER-32 taper and robust collet interface deliver a repeatable clamping solution that supports accurate machining cycles. By relying on a collet chuck with a standard ER-32 taper, shops benefit from wide compatibility with available collet sizes and accessories, which simplifies tool inventory and changeover. The proven geometry of this toolholder minimises axial and radial play during operation, helping to maintain surface finish quality and reduce the frequency of corrective rework. This focus on repeatability translates directly to higher first-pass yield and predictable production throughput. Compact format and low mass for flexible integration With a nominal diameter of 50 mm and a weight of approximately 0.7 kg, the toolholder offers a compact footprint that suits constrained spindle noses and stacked tooling assemblies. The reduced mass lowers inertial load on the spindle during rapid acceleration and deceleration, which can improve dynamic response in high-feed operations. The compact dimensions also facilitate closer proximity of adjacent tools in multi-tool setups, enhancing overall machine utilisation. The lightweight construction supports faster, safer tool changes while maintaining the rigidity expected from a professional clamping system. Engineered for workshop reliability and supply chain confidence Manufactured by Vertex, the chuck is intended for everyday industrial use and straightforward integration into existing ER-32 toolholding ecosystems. Availability from Metav Werkzeuge and the company’s established logistics in Emmerich ensures predictable procurement for production planning; Metav’s position as a precision partner is backed by decades of experience and a broad product range. The combination of a recognised manufacturer and a dependable distributor reduces procurement risk and supports continuous operation, particularly important for institutions that require consistent replacement parts and tooling standards. Contact Metav Werkzeuge in Emmerich for tailored application advice or to confirm compatibility with existing ER-32 collets — email info@metav-werkzeuge.com or call +49 2822 7131930 for a prompt response Technical data Article number / SKU: V-101 GTIN: 4061905084362 Manufacturer: Vertex Numbers / Core technical data Diameter: 50 mm Weight: 0.7 kg Taper: ER-32 eClass: 21020405 Designs / Special features Collet chuck design ER-32 taper compatibility Compact 50 mm form factor Produced by Vertex FAQ What taper standard does this collet chuck use? The V-101 collet chuck uses an ER-32 taper, making it compatible with standard ER-32 collets and accessories from Vertex and other manufacturers. Is the V-101 suitable for compact spindle noses? Yes, the 50 mm diameter and lightweight build of the collet chuck support integration in compact spindle configurations where space is limited. How heavy is the unit and what impact does that have? The toolholder weighs approximately 0.7 kg; the lower mass helps reduce spindle inertia and can improve dynamic response during high-speed tool changes. Can this chuck be used with existing ER-32 collets? Compatibility with standard ER-32 collets is a core feature of the product; the chuck is intended for use with commonly available ER-32 collet ranges. Who manufactures the V-101 and where can it be sourced? The chuck is manufactured by Vertex and is available through Metav Werkzeuge for rapid dispatch from Emmerich stock. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Face Chuck HSK‑A63 Weldon 18mm Clamping Diameter, DIN 69893 Form A - TECWERK
Combining a compact 50 mm body with a secure Weldon clamping face and the HSK‑A63 interface delivers stable, repeatable toolholding for demanding machining tasks; the 18 mm clamping diameter and bore tolerance H4 further ensure precise seating and reduced runout. Order the TECWERK Weldon face clamping holder directly via Metav Werkzeuge or consult their product specialists for application advice. TECWERK Weldon face clamping holder HSK‑A63 — 18 mm clamp, Ø 50 mm A TECWERK Weldon face clamping holder for HSK‑A63 spindles, designed to clamp cylindrical‑shank tools with a lateral driving flat to DIN 1835‑B for secure torque transmission. Weldon clamping for 18 mm shanks HSK‑A63 hollow taper shank (Form A) Compact body Ø 50 mm, length 80 mm Bore tolerance H4 for tight fit Stable, repeatable toolholding for accurate machining The HSK‑A63 hollow taper interface to DIN 69893 Form A provides a direct, rigid connection between spindle and holder, improving concentricity and reducing micro‑movement under load. By combining the hollow taper with a Weldon clamping face, the system offers both axial location and positive rotational drive, which translates into measurable improvements in repeatability and reduced machining scatter. This stability supports consistent surface finish and contributes to extended tool life. Positive drive for cylindrical shank tools with lateral flat Designed for tools with a lateral driving flat as specified in DIN 1835‑B, the Weldon arrangement locks the tool against rotation while the holder’s clamping diameter of 18 mm secures the shank. The combination of a lateral flat and tight bore tolerance H4 means torque is transmitted through geometry rather than friction alone, lowering the risk of slippage during interrupted cuts and heavy milling operations. As a result, the holder is particularly suitable where secure, direct drive is essential. Compact design for accessibility and process flexibility With a body diameter of 50 mm and an overall length 80 mm (A), the holder balances stiffness with accessibility in confined setups. The compact profile aids tool change clearance and fixture design while preserving the axial and radial support necessary for precision work. The hollow taper shank design also minimises thermal growth effects and enables quick mounting in HSK‑A63 tooling systems, supporting efficient changeovers in medium‑ to high‑mix production environments. Engineered tolerances and workshop reliability Attention to tolerances, notably the H4 bore specification, underpins consistent centring and interchangeability across the toolroom. The welded clamping principle and standardised interface simplify inspection routines and reduce setup variation, delivering tangible gains in productivity. For purchasers seeking a dependable clamping solution, this holder integrates industry standards to support predictable results and a robust process chain. Choose the TECWERK Weldon holder for reliable HSK‑A63 toolholding and contact Metav Werkzeuge for procurement and technical advice from Emmerich's quality team Technical data Article number: 2000832391NW Manufacturer: TECWERK Product type: face clamping holder Interface: HSK‑A Facts Clamping Ø: 18 mm Body Ø: 50 mm Length A: 80 mm Standard: DIN 69893 Form A Bore tolerance: H4 Special features Weldon flat for DIN 1835‑B shanks Hollow taper shank to DIN 69893 Form A For cylindrical shanks with lateral driving flat Tight bore tolerance H4 FAQ How does the TECWERK Weldon face clamping holder secure tools? The TECWERK Weldon face clamping holder secures cylindrical‑shank tools via a positive‑drive Weldon flat to DIN 1835‑B and an 18 mm clamping bore with H4 tolerance for reliable concentricity. Is this holder suitable for HSK‑A63 spindles? Yes — the holder uses a hollow taper shank to DIN 69893 Form A and is intended for direct mounting in HSK‑A63 systems, offering a rigid, repeatable connection. What benefits does the bore tolerance H4 provide? Bore tolerance H4 supports tight concentric fit and repeatable seating, reducing runout and improving the predictability of the machining process with the TECWERK holder. Which operations are appropriate for this type of holder? The holder is intended for operations requiring positive rotational drive of cylindrical shank tools—such as milling and interrupted cutting—where the Weldon flat and secure clamping reduce the risk of slippage. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50mm Face Clamping Arbor Weldon 32mm Shank Bore, DIN 69871 Form AD - TECWERK
Take advantage of precise standard conformity and a secure Weldon drive for consistent tool retention; the combination of a 32 mm clamping diameter with H4 bore tolerance and compatibility with SK40 tapers supports reliable machining cycles. Order the component directly via Metav Werkzeuge or request consultancy if spindle compatibility needs clarification. Face clamping chuck DIN 69871 Form AD, Weldon, 32 mm – TECWERK A face clamping chuck engineered for secure mounting of tools with cylindrical shanks and a side drive flat to DIN 1835‑B, intended for use in SK40 spindle systems and precision machining applications DIN 69871 Form AD compatible Weldon flat for positive drive 32 mm clamping diameter H4 bore SK40 taper, 65 mm projection Consistent tool retention for repeatable results The chuck is designed with a Weldon side drive flat to ensure secure torque transfer between spindle and toolholder, reducing slippage under load. Manufactured to DIN 69871 Form AD with a tight H4 bore tolerance, the unit provides a repeatable fit that minimises axial play and helps maintain concentricity throughout the production run. This stability supports consistent cycle times and reduces the need for frequent re‑setting, which benefits batch machining and high‑precision operations alike. Clear compatibility with SK40 spindles and cylindrical shanks Built to accept tools with a cylindrical shank and a lateral drive flat in accordance with DIN 1835‑B, the chuck matches common workshop tooling standards and fits SK40 tapers. The compact design, with a 65 mm projection and 50 mm body diameter, allows installation in a wide range of vertical and horizontal machining centres where space and clearance are critical. Stating mechanical compatibility in measurable terms enables straightforward integration into existing tool repertoires without guesswork. Precision clamping diameter for accurate centring The central feature is the 32 mm clamping diameter, produced to H4 tolerance to guarantee tight centring of the tool shank. Accurate centring reduces runout and supports improved surface finish and prolonged tool life by keeping cutting forces predictable. The combination of standardised dimensions and tight tolerances provides a verifiable basis for process planning and quality control, making the chuck suitable for tasks that demand repeatability rather than bespoke fixturing. Practical benefits for workshop efficiency By following established standards and providing a robust mechanical connection, the component simplifies procurement and tool management. The use of recognised standards reduces the need for specialist adapters and streamlines inventory. Where fast tool changes and dependable retention are priorities, the chuck acts as a straightforward mechanical solution that favours operational continuity and lowers the risk of unscheduled downtime when fitted correctly. Contact Metav Werkzeuge to verify spindle compatibility and arrange supply directly from Emmerich for timely delivery and expert advice Technical data Article number: 2000833746NW Norm: DIN 69871 Form AD SKU: 2000833746NW Facts Clamping diameter (Spann‑Ø d): 32 mm Projection (A): 65 mm Body diameter (D): 50 mm Special features Weldon drive flat for side drive per DIN 1835‑B Steep taper to DIN 69871 Form AD Bore tolerance H4 SK40 taper compatibility FAQ What spindle taper does this chuck fit? The chuck fits SK40 spindles; the unit is manufactured to match the SK40 taper and DIN 69871 Form AD specification for secure seating. Which tool shank form is required for proper engagement? Tools with a cylindrical shank and a lateral Weldon drive flat to DIN 1835‑B are required for correct engagement with this face clamping chuck. How precise is the clamping bore? The clamping bore is produced to H4 bore tolerance, ensuring accurate centring of a 32 mm clamping diameter for reduced runout. What are the main dimensions to check for installation? Key dimensions are 32 mm clamping diameter, 65 mm projection (A) and 50 mm body diameter (D); these values support compatibility checks with spindle clearance and tool length. Is the product suitable for automated tool changes? The robust Weldon drive flat and standardised taper seating support reliable retention during automated cycles when integrated with compatible SK40 tooling systems. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50mm Face Clamping Chuck DIN 69871 Form AD, Weldon Shank 25mm, A35mm - TECWERK
Take advantage of the combination of precise standard conformity, a secure Weldon clamping interface and compact dimensions for reliable, repeatable toolholding in daily workshop and CNC use; order the item directly via Metav Werkzeuge or consult the specialists for application advice. TECWERK Weldon face clamping holder SK40 – 25 mm clamping diameter (DIN 69871 Form AD) The TECWERK Weldon face clamping holder is a DIN 69871 Form AD toolholder for secure mounting of cylindrical-shank cutters with lateral drive according to DIN 1835-B. Weldon flat for secure lateral drive Conforms to DIN 69871 Form AD Clamping Ø 25 mm, bore tolerance H4 SK40 steep taper, compact A = 35 mm Dependable precision and conformity for repeatable machining The holder is designed to deliver consistent tool concentricity and simple interchangeability on machines with an SK40 taper. Built to DIN 69871 Form AD specifications, the device ensures predictable seating and a defined shank-to-spindle interface that reduces runout and supports longer cutter life. The presence of a Weldon flat secures lateral torque transfer, which is especially important when machining with single-sided drives or heavy radial loads; this translates into fewer tool changes and more stable cycle times on production and maintenance tasks. Compatibility with cylindrical-shank cutters and lateral drive standards Made for tools with a cylindrical shank and a side drive per DIN 1835-B, the toolholder accepts a 25 mm clamping diameter with a bore tolerance H4, providing a precise fit for standard shank diameters. The bore tolerance is significant because it limits radial play, improving repeatability when swapping cutters. Using standardised interfaces facilitates tool sourcing and reduces setup complexity in mixed production environments where compatibility and interchangeability matter. Compact design that supports practical workshop workflows With an overall diameter of 50 mm and a projection length A = 35 mm, the compact construction reduces interference in tight tool zones while keeping the effective clamping length sufficient for rigid engagement. The SK40 steep taper provides high axial stiffness and fast, reliable seating in the machine spindle. For shops that balance spindle dynamics and accessibility, this holder offers a practical compromise between rigidity and compactness, making it suitable for both manual milling machines and CNC equipment. Safe mounting practice and operational reliability Correct mounting and cleanliness of the taper interface are essential for dependable performance; regular inspection of seating surfaces and the Weldon flat maintains repeatability and operational safety. The product is intended for standard machine tool use and benefits from straightforward maintenance: keep contact surfaces free of burrs and debris, tighten to the recommended pull stud torque and verify runout after mounting. For specification questions or application matching, Metav Werkzeuge provides technical guidance and selection support to align toolholder choice with machining requirements. Contact Metav Werkzeuge for tailored advice on securing the TECWERK Weldon face clamping holder (SKU 2000833743NW) and to arrange prompt delivery from Emmerich to the workshop bench Technical data Article number: 2000833743NW Norm: DIN 69871 Form AD Product type: Face clamping holder (Flächenspannfutter) Brand: TECWERK Facts Diameter: 50 mm Clamping diameter (Spann-Ø d): 25 mm Projection A: 35 mm Bore tolerance: H4 Special features Weldon flat (Weldon) for lateral drive Steep taper: DIN 69871 Form AD For tools with cylindrical shank and side drive to DIN 1835-B Shank interface: SK40 FAQ What spindle taper does this holder use? The TECWERK Weldon face clamping holder is designed for an SK40 spindle interface in accordance with DIN 69871 Form AD. Which tool shank diameter is compatible with this holder? The holder accepts tools with a 25 mm shank diameter; the clamping bore is manufactured to H4 tolerance to ensure a precise fit. Is the lateral drive provided by a Weldon flat? Yes — the product features a Weldon flat for positive lateral drive transfer and secure torque transmission. What are the key dimensions to check for machine compatibility? Relevant dimensions include the outer diameter 50 mm, projection A = 35 mm, and clamping bore 25 mm with H4 tolerance; these determine clearance and engagement with the spindle. Can the holder be used on both manual and CNC milling machines? The design and SK40 taper make the holder suitable for both manual and CNC machines where a DIN 69871 Form AD interface and Weldon lateral drive are required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm Face Clamping Chuck Weldon Shank DIN 69871 Form AD, 8mm Clamping Diameter - TECWERK
Benefit from secure, DIN‑based toolholding: the steep taper and Weldon clamping combine to reduce runout and ensure positive torque transmission for cylindrical‑shank cutters. With an SK40 interface, 8 mm clamping diameter and a 50 mm projection length, this holder supports consistent milling performance. Order the holder directly via Metav Werkzeuge or consult our specialists for application advice. End mill holder DIN 69871AD (Weldon) SK40 — clamping Ø 8 mm (TECWERK) A robust End mill holder DIN 69871AD for tools with a cylindrical shank and lateral driving flat, designed for use in SK40 spindles. Steep taper DIN 69871 Form AD Weldon clamping for cylindrical shanks Clamping diameter 8 mm, bore tolerance H4 Designed for SK40 spindles, A = 50 mm Precision grip for reduced runout and longer tool life The combination of a clamping diameter 8 mm with bore tolerance H4 provides a consistently tight fit that minimises radial play. Reduced eccentricity leads to lower runout, which in turn improves surface finish and extends cutter life; the result is a measurable improvement in repeatability for batch production. The specification DIN 69871 Form AD ensures the holder matches standard spindle interfaces, facilitating predictable concentricity in demanding machining tasks. Secure torque transfer and compatibility with SK40 systems Fitted with a Weldon drive for lateral engagement per DIN 1835-B, the holder guarantees positive drive between tool and arbor, preventing slippage under axial and torsional load. The SK40 interface provides a steep taper seating that simplifies tool change procedures while maintaining axial stability during milling operations. For workshops standardised on SK40 tooling, this configuration reduces setup time and supports higher process reliability. Stable geometry for industrial machining workflows A compact geometry with A = 50 mm projection and D = 28 mm body diameter offers a balance between accessibility and rigidity, limiting vibration during cutting. The construction supports consistent clamping force over repetitive cycles, which is beneficial where tool changes are frequent. The holder’s design focuses on dependable mechanical engagement rather than complex additional functions, making it a pragmatic choice for production environments seeking robust, low‑maintenance toolholding. For application advice or to check stock of the TECWERK SK40 end mill holder (SKU 2000833720NW), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and dispatch from Emmerich Technical data Article number: 2000833720NW Product type: End mill holder (Flächenspannfutter) Brand: TECWERK Standard: DIN 69871 Form AD Facts Projection length A: 50 mm Body diameter D: 28 mm Clamping Ø d: 8 mm Bore tolerance: H4 Interface: SK40 Special features Weldon clamping (lateral driving flat) Designed for cylindrical shanks to DIN 1835‑B Steep taper according to DIN 69871 Form AD FAQ What shank types are compatible with this holder? The TECWERK end mill holder (SKU 2000833720NW) is made to accept cylindrical shanks with a lateral driving flat in accordance with DIN 1835‑B (Weldon style). What is the clamping diameter and tolerance? Clamping diameter is 8 mm with a bore tolerance of H4, providing a tight fit for minimal radial runout. Which spindle interface does the holder use? The holder uses the steep taper DIN 69871 Form AD and is specified for SK40 spindles. What are the principal dimensions to consider for setup? Key dimensions are projection length A = 50 mm and body diameter D = 28 mm, which influence reach and rigidity during machining. How does the Weldon clamping affect performance? Weldon clamping offers positive mechanical drive via the lateral flat, improving torque transmission and reducing the risk of tool slippage under heavy cutting forces. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50mm Face Clamping Holder DIN 69871 Form AD, Weldon 18mm Shank, A63mm - TECWERK
Take advantage of the combination of a secure Weldon flat and the precise SK40 taper for reliable milling setups; order the holder directly via Metav Werkzeuge or consult our specialists for application advice. Weldon end mill holder SK40 – 18 mm clamping, 63 mm projection (TECWERK) A Weldon end mill holder for SK40 spindles, designed to accept cylindrical-shank tools with lateral drive faces for precision milling tasks Weldon flat for secure lateral drive SK40 taper to DIN 69871 Form AD 18 mm clamping diameter with H4 bore 63 mm projection for extended reach Precision compatibility for standard milling systems The holder is built to the DIN 69871 Form AD standard and mates with SK40 spindles, ensuring consistent interface geometry across machines. The steep taper provides stable seating and repeatable axial location, while the 18 mm clamping diameter and H4 bore tolerance guarantee a tight fit for tools with a cylindrical shank to DIN 1835‑B. This standardised compatibility reduces setup time and simplifies tooling management in production environments, enabling predictable tool positioning and helping to maintain machining tolerances. Secure tool retention and reduced runout for consistent cuts A defining technical advantage is the Weldon flat, which provides lateral drive and prevents rotational slippage under high cutting forces. Combined with the robust taper connection, this design improves tool retention and contributes to lower runout, translating into better surface finish and longer tool life. The 63 mm projection balances accessibility and rigidity: a longer reach where needed without excessively compromising stiffness. For workshops seeking dependable milling performance, the combination of secure lateral drive and precise taper seating supports stable, efficient material removal. Practical workshop benefits and supply reliability Integration into an existing tooling system is straightforward thanks to conformity with common standards for milling holders and tool shanks. The component’s compatibility with DIN 1835‑B tooling simplifies inventory choices and changeovers on the shop floor. Metav’s distribution model emphasises dependable supply from Emmerich and knowledgeable technical advice, shortening lead times and reducing procurement friction. The robust construction and standards compliance mean fewer interruptions in production and predictable maintenance cycles, helping teams focus on throughput and product quality. Contact Metav Werkzeuge for purchase and technical guidance on the TECWERK Weldon end mill holder — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for delivery and application support from our Emmerich centre Technical Data Article number: 2000833736NW Product: Weldon end mill holder (face clamping chuck) Brand: TECWERK Facts Norm: DIN 69871 Form AD Taper: SK40 Projection A: 63 mm Diameter D: 50 mm Clamping Ø d: 18 mm Bore tolerance: H4 Special features Weldon flat for lateral drive Steep taper to DIN 69871 Form AD Accepts cylindrical shank tools to DIN 1835‑B Brand: TECWERK FAQ What spindle taper does the holder use? The TECWERK Weldon end mill holder uses an SK40 taper and conforms to DIN 69871 Form AD, suitable for machines with the same taper standard. Which tool shank types are compatible? Tools with a cylindrical shank and lateral drive face to DIN 1835‑B are compatible with this Weldon end mill holder (TECWERK, SKU 2000833736NW). What is the clamping diameter and tolerance? Clamping diameter is 18 mm with a bore tolerance of H4, providing a precise fit for appropriately sized shank tools. How does the Weldon flat improve machining? The Weldon flat gives lateral drive to the tool, preventing rotation on the shank under torque and improving tool retention and runout stability in the TECWERK holder. What projection length should be expected for reach and rigidity? This holder offers a 63 mm projection (A = 63 mm), balancing extended reach with stiffness for reliable milling operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50mm Height Setting Device Set High Precision 0.005mm Resolution - Vertex
Take advantage of the combination of precise 0.005 mm repeatability, a compact 50 mm measuring range and low weight for faster setups and reduced scrap in the workshop; order the height setting device directly via Metav Werkzeuge or ask our consultants if needed. HP-50Z Height Setting Device Set (50 mm, 0.005 mm precision) — Vertex The HP-50Z height setting device set offers a compact solution for repeatable height transfer and tool presetting in toolrooms and production workshops. Precise 0.005 mm repeatability 50 mm measuring range Compact, lightweight 0.32 kg Delivered as a complete set Faster, repeatable setup for production The compact gauge is designed to reduce setup time and to increase process reliability through consistent height transfer. With a stated accuracy of 0.005 mm, the device lowers the risk of misaligned tools and dimensional rejects, enabling smoother tool changes and shorter machine downtime. The measurable benefit is fewer trial cuts and quicker ramp-up to series production, which supports lean workshop processes and improved throughput. Compact design that supports workshop logistics A small footprint and 50 mm working height make the unit easy to store alongside other presetting equipment and to carry between workstations. At only 0.32 kg, the assembly is noticeably lightweight while still offering stable placement for precise measurements. Supplied as a complete set, the solution simplifies procurement and reduces the number of items to manage in the tool cabinet, supporting orderly workflows and faster access during shift changes. Integration with toolroom routines and traceable accuracy Built for integration into standard metrology routines, the instrument suits tool presetter benches, jigging stations and manual inspection tasks. The repeatability characteristic ensures comparable readings across operators and shifts, which is beneficial when documenting setup parameters or feeding values into machine controllers. The model HP-50Z from Vertex is suitable for workshops that prioritise reproducible setup data and straightforward inspection protocols. Contact Metav Werkzeuge in Emmerich for supply and technical advice on the Vertex HP-50Z height setting device set — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and delivery from our European stock Technical data Article number: HP-50Z GTIN: 4061905084881 Manufacturer: Vertex Facts Accuracy: 0.005 mm Height / Measuring range: 50 mm Weight: 0.32 kg ECLASS: 21170532 Special features Delivered as a set Type: Standard Category: Vertex FAQ What level of precision can be expected from this device? The device provides a precision of 0.005 mm, enabling fine height transfer suitable for tool presetting and inspection tasks with the Vertex HP-50Z set. Is the height setting device portable between workstations? Yes, the compact form and low weight of 0.32 kg make the tool portable and practical for moving between benches or machines. What measuring range does the instrument cover? The unit covers a measuring height of 50 mm, which is adequate for common tool and cutter setup operations in the workshop. Is the product supplied as a complete kit? The HP-50Z is delivered as a set, ensuring all required components for standard height setting are included. Can the device support documented repeatability across operators? The design focuses on repeatability; consistent readings contribute to traceable setup data and reproducible machine starts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Height Setting Device With LED And Magnetic Base, - Vertex
Compact workshop performance with visible benefits: the 50 mm measuring capability together with an integrated LED and a magnetic base reduces set-up time and improves repeatability. Order the device via Metav Werkzeuge for reliable supply, or consult their specialists for application guidance. HP-50EM Height Setting Device (Vertex) – 50 mm, LED & Magnetic Base A compact HP-50EM height setting device for rapid tool and fixture set-up in workshop metrology. Compact 50 mm height range Integrated LED illumination Strong magnetic base for stable mounting Lightweight 0.6 kg for easy handling Faster, more reliable setup on the machine The HP-50EM is designed to speed tool-height adjustments and bench checks by combining a clear 50 mm working range with LED illumination and a secure magnetic base. The illuminated tip improves visibility in poorly lit spindle or vice areas, reducing measurement uncertainty and rework. By converting measured positions directly into repeatable set points, the unit supports faster changeovers and fewer trial cuts, delivering a measurable uplift in operational efficiency for production and maintenance tasks. Built for everyday workshop use A compact form factor and lightweight (0.6 kg) construction make the instrument easy to position and manoeuvre across setups without adding bulk to the measurement workflow. The magnetic base provides immediate stability on ferrous surfaces, while the illuminated measurement point helps avoid errors when aligning cutters or fixtures. These characteristics translate into less downtime and a steadier production flow, particularly in small and medium-sized workshops where space and speed are at a premium. Simple integration with existing processes The device fits naturally into standard height-setting routines and complements existing metrology tools, enabling consistent results across jobs. Its straightforward operation reduces training effort and the learning curve for shop-floor personnel, while the visible LED aids rapid verification during cycle changes. For specialised applications or compatibility checks, Metav Werkzeuge can supply additional technical information and advice to ensure seamless integration with existing tool-setting procedures. Contact Metav Werkzeuge for tailored advice on integrating the Vertex HP-50EM into workshop routines and to arrange prompt delivery from Emmerich Technical Data Article number: HP-50EM GTIN: 4061905083846 eClass: 21170532 Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/76/bc/99/63/6399bc76e7a68eb025b2d981/hp-50em-main.jpg Numbers / Core technical data Height: 50 mm Weight: 0.6 kg SKU: HP-50EM Special features Integrated LED illumination Magnetic base for secure mounting Brand: Vertex Compact workshop design FAQ What is the working range of this height setting device? The HP-50EM height setting device offers a 50 mm range, suitable for rapid tool-height checks and short-range calibration tasks. Is the HP-50EM suitable for use on the machine table? Yes. The magnetic base ensures stable mounting on ferrous machine tables, making the Vertex HP-50EM practical for in-situ adjustments. Does the device require additional lighting for precise readings? The unit includes integrated LED illumination, so additional external light is generally unnecessary for most tool-setting situations. How heavy is the HP-50EM and is it easy to handle? The instrument weighs 0.6 kg, which supports easy handling and quick repositioning during workshop routines. Where can technical compatibility information be obtained? Metav Werkzeuge can provide supplementary technical data and application advice for the Vertex HP-50EM (SKU HP-50EM) to ensure compatibility with specific tool-setting procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Horizontal Clamp With Angle Base Variable Open Holding Arm, M8×55 Pressure Screw, 3000N - AMF
Take advantage of the combination of high clamping force, flexible mounting and automatic height compensation for reliable fixture performance; order the unit via Metav Werkzeuge or contact our consultants for specification support. Horizontal clamp No. 6871 (Size 50) – angled foot, 3,000 N clamping force | AMF A Horizontal clamp No. 6871 for secure hold-down in fixture and jig applications, offering a variable open holding arm and an angled foot for versatile mounting in machining setups. 3000 N maximum clamping force Variable open holding arm Automatic height compensation 35–40 mm Angled foot for flexible mounting Accurate clamping that maintains process stability The clamp delivers a maximum clamping force of 3,000 N, ensuring steady workpiece fixation under typical machining loads. The benefit is a measurable reduction in micro-movement during milling and drilling, which translates into repeatable tolerances and fewer rejects. The design focuses on functional reliability: the core mechanism provides consistent pressure while the compact footprint preserves access to the workpiece. This makes the clamp suitable for production jigs and small-batch fixtures where stability and throughput are priorities. Flexible mounting and straightforward height compensation Installation is simplified by the angled foot and the automatic height compensation of 35–40 mm, allowing the clamp to adapt to slight variations in workpiece height without manual shimming. The unit includes an M8 x 55 clamping screw and a range of dimensional references (for example A = 8.4 mm, B = 85 mm, C = 22–32 mm) that enable precise positioning in fixture plates. This flexibility reduces set-up time and supports quicker changeovers between components, improving overall machine utilisation and workflow efficiency. Open holding arm design for accessible workpiece loading The variable open holding arm facilitates easy loading and unloading of parts while maintaining a secure hold during machining. By combining accessibility with a robust hold-down function, the clamp reduces handling time and minimises the risk of collision with tooling. The adjustable clamping range (HW min. 1 mm to HW max. 31 mm) covers a wide span of part geometries, making the device a practical choice for mixed-production environments where adaptability matters. Durable construction for dependable everyday use Built for routine shop-floor conditions, the clamp is engineered for longevity and low maintenance. Key functional elements such as the automatic compensating mechanism and the solid clamping interface are designed to withstand repeated cycles without loss of performance. The clear numerical specifications and simple mechanical concept support predictable maintenance planning, which contributes to uninterrupted production and reliable throughput over time. For secure procurement and fast, reliable delivery, order the AMF Horizontal clamp No. 6871 via Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability for the intended application Technical data Article number: 4123572012NW Type: 6871 Name: Horizontal clamp No. 6871 Size 50, angled foot (AMF) Product type: Horizontal clamp Manufacturer: AMF Packaging unit: 1 Facts Maximum clamping force: 3000 N A: 8.4 mm B: 85 mm C: 22–32 mm D / D1: 6.5 mm E: 35 mm F: 37 mm H: 88 mm H1: 124 mm H2: 158 mm HW min.: 1 mm HW max.: 31 mm I: 13 mm K: 10.6 mm L1: 244 mm M: 38.1 mm N: 57 mm P: 51 mm Automatic height compensation S: 35 mm Maximum height compensation: 40 mm Clamping screw: M8 x 55 Special features Variable execution; open holding arm; angled foot Size: 50 Designed for fixture and jig clamping applications Compact footprint with high clamping capability Clear dimensional references for accurate integration FAQ What clamping force does this device provide? The clamp provides a maximum clamping force of 3,000 N, making the AMF Horizontal clamp No. 6871 suitable for standard machining fixture duties. How much height variation can the clamp compensate for? The unit features automatic height compensation with an effective S of 35 mm and a maximum compensation of 40 mm, enabling adaptation to small workpiece height differences. Which clamping range is supported by the holding arm? The adjustable clamping range is from HW min. 1 mm to HW max. 31 mm, allowing the clamp to secure a variety of part thicknesses in production jigs. Which mounting and fixing elements are included in the specification? Dimensional details include an M8 x 55 clamping screw and multiple reference measurements (for example L1 = 244 mm, H = 88 mm) to assist correct fixture integration for the Horizontal clamp No. 6871 (AMF), SKU 4123572012NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Horizontal Clamp With Automatic Height Adjustment, 2.5 kN Clamping Force, Group 50 - BESSEY
Combining automatic height compensation with a reliable 2,500 N clamping force ensures repeatable, secure holds and a smooth workflow in batch and one-off machining. Benefit from robust horizontal support and straightforward integration in existing jigs; order directly via Metav Werkzeuge or consult our specialists for application advice. STC-HH50 horizontal clamp (size 50) — BESSEY STC-HH50 is a horizontal clamp designed for workshop and industrial fixturing, offering automatic clamping height adjustment and a compact horizontal base plate for secure workholding. Automatic clamping height adjustment 2,500 N maximum clamping force Horizontal base plate design Compact size 50 for flexible fixturing Consistent performance through controlled clamping force The unit delivers a 2,500 N clamping force, which provides a clear, measurable parameter for process planning and fixture design. This defined force reduces variability between cycles and supports predictable machining results. The automatic height adjustment mechanism converts uneven workpiece heights into consistent clamp pressure, reducing set-up time and lowering the risk of over‑ or under‑clamping. Such repeatability benefits production lines and manual workshops seeking efficient, reliable workholding. Space-saving design with precise dimensional data The compact construction and horizontal base plate optimise bench and fixture space. Key dimensions — L1 217 mm, M 33–48 mm and A 13 mm — permit easy integration into existing clamping systems and bespoke jigs. These metrics allow planners to calculate clearances and stroke requirements without guesswork. The practical size classification (size 50) indicates the clamp’s intended duty range, making specification straightforward when comparing alternatives for a given application. Practical advantages for workshop and industrial use Built for routine use, the clamp suits repetitive assembly, light machining and general fixturing tasks where a dependable horizontal hold is required. The automatic height compensation shortens set-up for varied stock thicknesses, while the horizontal orientation stabilises flat and prismatic parts during operations. Supplied as a single unit, the device supports modular fixture concepts and rapid changeovers, improving throughput and reducing fixture complexity. Contact Metav Werkzeuge for detailed application support and fast procurement of BESSEY horizontal clamps; our specialists at Metav Werkzeuge can advise on best practices and supply from stock. Technical data Article number: 4000831134NW Type: STC-HH Label: Waagrechtspanner STC-HH50 Gr.50 waagrechte Grundpl. BESSEY Manufacturer: BESSEY Packaging unit: 1 Core specifications Max clamping force: 2,500 N Size: 50 L1: 217 mm M: 33–48 mm A: 13 mm B: 77 mm C: 25.4 mm E: 40 mm H1: 27 mm I: 14 mm N: 60 mm P: 53 mm Features and applications Automatic clamping height adjustment Horizontal base plate design Suitable for workshop and industrial fixturing Supplied as single unit FAQ What is the maximum clamping force of this horizontal clamp? The BESSEY STC-HH50 horizontal clamp provides a maximum clamping force of 2,500 N, suitable for secure holding in many workshop and light industrial applications. How does the automatic height adjustment benefit set-up times? The automatic clamping height adjustment on the STC-HH50 compensates for variations in stock thickness, reducing manual shimming and accelerating fixture set-up for repeatable cycles. Which dimensions are most relevant for integrating the clamp into a jig? Key dimensions to consider are L1 217 mm and M 33–48 mm, together with A, B and C (shown in the technical data), which define mounting space and effective stroke for the clamp. Is the clamp delivered ready for immediate installation? The STC-HH50 is supplied as a single unit; mounting and installation depend on the chosen fixture design and any additional fasteners or adaptors required for the specific setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Integrated Self‑Clamping Drill Chuck BT‑30, 1.4kg - Vertex
Benefit from precise, repeatable tool holding and faster changeovers thanks to the integrated self‑tightening mechanism, BT‑30 taper and 50 mm nominal diameter; order the INT-13-BT30 directly via Metav Werkzeuge or consult our specialists for application advice. INT-13-BT30 Vertex integrated self‑tightening drill chuck, BT‑30 taper, 50 mm A INT-13-BT30 integrated, self‑tightening drill chuck for BT‑30 spindles, designed to provide secure tool retention and streamlined changeover in machining centres. Integrated self‑tightening mechanism BT‑30 taper compatibility 50 mm nominal diameter for secure grip Robust 1.4 kg construction Increased productivity through dependable clamping The integrated self‑tightening system converts spindle torque into enhanced clamping force, delivering consistent secure clamping and reducing the need for frequent retightening. This design shortens setup time and supports uninterrupted production runs, so machines spend more time cutting and less time being reset. The combination of BT‑30 interface and the compact 50 mm design makes the unit suitable for many machining applications where reliable chuck performance directly affects throughput and part quality. Practical operation and maintenance advantages The self‑tightening function means the chuck tightens automatically under spindle torque, improving grip as cutting forces rise; this leads to a measurable increase in operating confidence when dealing with varying feeds or intermittent loads. The component’s robust 1.4 kg construction and simplified geometry reduce points of wear, enabling straightforward routine checks and limited maintenance interventions. Clear design intent and accessible parts minimise downtime and support long service intervals for the workshop. Integration with machines and everyday workflows Engineered for standard BT‑30 toolholders, the chuck integrates smoothly into existing tool magazines and quick‑change systems. Its 50 mm nominal diameter provides a stable contact surface that helps keep runout within acceptable limits for general machining tasks, while the integrated layout avoids extra adapters that add bulk or imbalance. Supplied as part of Vertex’s tooling range, the product is positioned for both shopfloor use and industrial production where reliable, repeatable tool holding contributes to consistent component tolerances and process stability. For enquiries about stock, compatibility or application recommendations for this Vertex BT‑30 chuck, contact Metav Werkzeuge for technical guidance and order management at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: INT-13-BT30 GTIN: 4061905095641 ETIM: EC002125 eClass: 21020490 Facts Diameter: 50 mm Weight: 1.4 kg Taper: BT-30 Special features Integrated self‑tightening mechanism Integrated design, self‑clamping function Category: Vertex FAQ What spindle taper does the chuck use? The chuck uses a BT‑30 taper suitable for machines and toolholders specified for BT‑30 interfaces. How does the self‑tightening mechanism work? The self‑tightening design increases clamping force as spindle torque rises; the INT-13-BT30 uses this principle to improve grip during cutting. What nominal diameter is intended for tool shanks? The device features a 50 mm nominal diameter that provides a stable grip area for compatible tools. Is the chuck suitable for high‑speed machining? The chuck is designed for standard machining use with BT‑30 spindles; suitability for high‑speed applications depends on the machine and tooling combination. How heavy is the chuck and what does that imply for balancing? The unit weighs 1.4 kg; its compact mass and integrated design simplify balancing compared with larger adapter solutions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Integrated Self‑Clamping Drill Chuck JC‑25 - Vertex
Benefit from reliable clamping, a robust taper interface and uncomplicated mounting that keep production running smoothly; combine consistent bore quality with straightforward service routines for reduced downtime. Order the drill chuck directly via Metav Werkzeuge or consult our advisers for compatibility checks. INT-13-JC25 Drill Chuck — Integrated self-clamping chuck, 50 mm bore (Vertex) The INT-13-JC25 Drill Chuck is an integrated, self-clamping chuck designed for machining centres and drill spindles where secure, repeatable clamping is required Integrated self-clamping design 50 mm bore diameter JC-25 taper interface Sturdy 1.6 kg construction Consistent clamping for improved part accuracy The integrated self-clamping mechanism delivers a reliable grip that decreases runout and maintains repeatability across production runs. By securing tools centrally and reducing axial play, the unit supports consistent hole geometry and surface finish, which lowers scrap rates and rework. The result is a measurable improvement in throughput and a reliable process window for drill, ream and tapping operations that demand reproducible results. Secure mounting and broad compatibility with JC-25 taper Mounting is straightforward thanks to the JC-25 taper interface, which provides a positive mechanical seating between spindle and chuck. The 50 mm datum is a practical dimension for medium-duty drilling and supports standard twist drills and toolholders in workshop environments. The relatively low mass contributes to controlled spindle dynamics while ensuring the interface maintains concentricity under load, making the chuck suitable for repeatable, mechanically stable set-ups. Robust construction reduces maintenance and downtime Constructed with a focus on durability, the chuck’s robust build and balanced design minimise wear and help preserve clamping performance over time. Low-maintenance operation is achieved through simple cleaning and inspection routines, reducing the need for frequent adjustments. This contributes to extended service life and predictable maintenance cycles, translating into lower total cost of ownership and a dependable component for production-critical tooling systems. Choose the Vertex INT-13-JC25 with JC-25 taper for dependable, repeatable clamping — contact Metav Werkzeuge in Emmerich for technical clarification or to arrange supply via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical Data Article number: INT-13-JC25 GTIN: 4061905092213 Manufacturer: Vertex Data Diameter: 50 mm Weight: 1.6 kg ECLASS: 21020490 ETIM: EC002125 Special features Integrated self-clamping JC-25 taper interface Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/c2/2f/97/63/63972fc2c806fb82109e371a/int-8-mt2-main.jpg FAQ What spindle interface does the chuck use? The chuck uses a JC-25 taper interface; the INT-13-JC25 is supplied to fit spindles prepared for a JC-25 taper. What is the maximum bore or tool shank supported? The chuck has a 50 mm bore diameter suitable for a wide range of twist drills and toolholders compatible with that capacity. How heavy is the chuck and does weight affect spindle balance? The unit weighs 1.6 kg; its balanced construction helps maintain spindle dynamics and supports stable clamping under typical machining loads. Is the chuck suitable for high-precision drilling tasks? Yes. The integrated self-clamping design of the INT-13-JC25 reduces runout and enhances repeatability, supporting precision drilling and reaming operations. What maintenance is required to keep clamping performance? Regular cleaning and visual inspection are recommended; minimal maintenance preserves the chuck’s performance and prolongs service life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Integrated Self‑Clamping Drill Chuck MT‑3, 1.4kg - Vertex
Take advantage of the combination of secure, self-tightening clamping and MT3 taper compatibility to improve drilling stability and reduce setup time; order the INT-13-MT3 directly via Metav Werkzeuge or consult our team for application-specific advice. INT-13-MT3 integrated self-tightening drill chuck, MT3 taper (Vertex) The INT-13-MT3 is an integrated, self-tightening drill chuck designed for workshop and industrial machines with an MT3 taper, offering reliable clamping for general metalworking and drilling tasks. Integrated self-tightening mechanism MT3 taper for secure machine mounting 50 mm chuck capacity for larger bits Robust construction, approx 1.4 kg Secure clamping that reduces slippage and rework The integrated self-tightening design converts rotational force into additional jaw clamping, providing a more consistent grip than conventional chucks under load. This mechanical advantage improves hole accuracy and minimises slippage during drilling, which directly reduces rework and increases process reliability. The result is measurable efficiency: fewer interruptions for re-clamping and more consistent part quality. For operations where repeatability and uptime matter, the enhanced grip contributes to smoother production flow and lower overall machining costs. Fast integration with MT3 spindles for minimal setup time Fitting the chuck to a machine is straightforward thanks to the MT3 taper, which is a standard interface on many toolroom lathes and machining centres. The taper ensures positive seating and quick mounting without additional adaptors in compatible setups, cutting down tool-change time and simplifying toolholding logistics. Clear taper seating improves concentricity and reduces runout risk, helping to maintain the precision of drilled holes and extend the life of cutting tools by ensuring steady alignment during operation. Practical dimensions and stable operation for heavier tooling With a maximum jaw capacity of 50 mm, this chuck accommodates larger drill bits and toolholders used in more demanding tasks. The unit’s mass of approximately 1.4 kg contributes to rotational stability, helping to dampen vibration and support cleaner cut quality when paired with appropriate tooling. Built for robust everyday use, the chuck pairs well with standard workshop equipment and provides dependable performance where secure, repeatable clamping is required. Vertex manufacturing standards underline consistent production quality, while Metav’s European distribution ensures reliable delivery and a practical quality filter for the workshop market. For any specific machining parameters or compatibility checks, the Metav team is available to provide technical details. For secure clamping with Vertex reliability, contact Metav Werkzeuge for tailored advice and direct supply from Emmerich to your workshop. Technical Data SKU: INT-13-MT3 GTIN: 4061905091148 ECLASS: 21020490 ETIM: EC002125 Facts Chuck diameter: 50 mm Weight: 1.4 kg Taper: MT3 Special features Integrated and self-tightening design Brand: Vertex Product type: Drill chuck FAQ How is the chuck mounted to a machine? The chuck is mounted via the MT3 taper, which provides secure seating in spindles and centres designed for MT3 interfaces. What is the maximum clamping capacity? The maximum jaw capacity is 50 mm, suitable for larger twist drills and toolholders within that diameter. Does the chuck tighten automatically during operation? Yes, the integrated self-tightening mechanism increases jaw clamping force as the tool rotates, improving grip under load. Is the INT-13-MT3 suitable for use on lathes and milling machines? The INT-13-MT3 is compatible with machines that accept an MT3 taper and is commonly used on toolroom lathes and compatible milling heads. How heavy is the chuck and does that affect stability? The chuck weighs approximately 1.4 kg; this mass contributes to rotational stability and can reduce vibration when used with appropriate tooling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Integrated Self‑Clamping Drill Chuck R8, For Milling Spindles - Vertex
Take advantage of the combination of precise clamping, easy integration on R8 spindles and robust workshop construction to maintain consistent drilling accuracy and minimise downtime. Order the item directly via Metav Werkzeuge or consult the technical advisors for compatibility and installation advice. Vertex INT-13-R8 integrated self-tightening drill chuck, R8 taper, 50 mm capacity The INT-13-R8 is an integrated, self-tightening drill chuck designed for R8-spindle machines, providing secure clamping for drill shanks up to 50 mm. Integrated self-tightening mechanism R8 taper for standard spindle mounts 50 mm maximum drill capacity Robust 1.5 kg workshop construction Consistent clamping for reliable machining results The integrated self-tightening jaw system converts rotational torque into increased clamping force, delivering steady retention throughout each cut. This behaviour maintains concentricity and reduces runout compared with conventional chucks where manual tightening is the only securing action. With a 50 mm maximum capacity and an R8 taper, the chuck is suitable for a wide range of tool diameters commonly used in toolrooms and small production setups. The result is improved process reliability and fewer rejected parts, which supports higher first-pass yields and predictable cycle times. Built for workshop use and straightforward handling Constructed for daily operation, the chuck’s overall design balances secure clamping with manageable mass: at 1.5 kg it is stable in the spindle without adding excessive inertia. The integrated configuration removes the need for additional adaptors, simplifying mounting and reducing possible misalignment points. Routine care consists of cleaning and light lubrication of moving surfaces to sustain smooth jaw movement; this keeps maintenance straightforward and supports long service intervals. Durable build quality minimises wear in demanding environments and contributes to a longer operational lifetime. Broad compatibility and practical application in machining Engineered for machines that accept the R8 taper, the chuck adapts to conventional milling spindles and toolroom equipment where precision drilling is required. Its integrated nature means straightforward replacement or retrofit where spindle taper and shank compatibility are confirmed. The compact footprint and robust clamping make it suitable for drilling, reaming and similar axial operations where reliable tool retention and repeatable positioning are priorities. For technical queries about fitment, spindle interfaces or tooling ranges, Metav Werkzeuge can provide application-focused guidance and specification checks. Contact Metav Werkzeuge today for tailored advice on Vertex INT-13-R8 drill chucks and ensure the correct taper compatibility and installation for workshop requirements Technical data Article number: INT-13-R8 GTIN: 4061905090141 Manufacturer: Vertex Facts Diameter: 50 mm Weight: 1.5 kg Taper: R8 eClass: 21020490 ETIM: EC002125 Special features Integrated and self-tightening Suitable for R8 spindle mount Category: Vertex SKU: INT-13-R8 FAQ Is the chuck compatible with standard R8 spindles? Yes. The Vertex INT-13-R8 drill chuck is designed for machines that accept an R8 taper, ensuring straightforward mounting where that spindle interface is provided. What is the maximum drill diameter that the chuck accepts? The maximum drill capacity is 50 mm, which accommodates a broad range of common drilling operations. How much does the chuck weigh? The chuck has a mass of 1.5 kg, offering a balance between rigidity and manageable spindle inertia. Does the chuck need special maintenance to keep performance? Routine cleaning and light lubrication of the jaw assembly are recommended to maintain the smooth operation and long service life of the INT-13-R8. For which machining tasks is this chuck suitable? The chuck is ideal for precision drilling and similar axial machining tasks on equipment with an R8 spindle; it is intended where secure clamping and repeatable concentricity are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Integrated Self‑Clamping Drill Chuck SK‑50, Integrated Self‑Holding - Vertex
Take advantage of the combination of self-tightening clamping, a robust SK-50 taper interface and a compact 50 mm capacity for reliable spindle engagement and consistent hole quality; order the integrated drill chuck directly via Metav Werkzeuge or consult our advisors if clarification is required. Integrated self-tightening drill chuck INT-13-SK50 — SK-50 taper, 50 mm capacity, Vertex Integrated self-tightening drill chuck INT-13-SK50 is designed for secure tool retention in machining centres and heavy-duty spindles where reliable clamping and rapid changeover matter Self-tightening mechanism for secure hold Compatible with SK-50 taper spindles 50 mm nominal diameter for larger tooling Robust build for industrial use Precision clamping reduces runout Consistent clamping for repeatable precision The integrated chuck combines a self-tightening mechanism with engineered jaw geometry to deliver precision clamping across repetitive cycles. This design minimises radial runout and wobble, translating directly into improved hole position and surface finish. For production environments where part tolerances are strict, the result is fewer rejects and reduced rework. The compact form factor also supports efficient tool paths without excessive overhang, maintaining machining stability under varying cutting loads. Straightforward integration with SK-50 spindles Engineered for spindles with an SK-50 taper, the chuck allows quick mechanical mounting and positive torque transfer between spindle and tool. The taper interface ensures concentric seating and repeatable alignment, which accelerates machine set-up and shortens downtime during tool changes. Clear numeric identifiers on the body and a standardised interface help maintenance teams identify compatibility at a glance, supporting faster changeovers and predictable production flow. Durable construction for demanding workshop use Constructed to withstand industrial workloads, the chuck’s materials and finish prioritise wear resistance and long service life. The weight of 3.9 kg and solid construction provide the mass and stiffness needed to absorb vibration during heavy cuts, while heat-treated components preserve clamping force over many cycles. Regular, simple maintenance extends operational life without complex procedures; routine inspection and lubrication are sufficient to sustain reliable performance. Practical applications and compatibility overview This chuck is suitable for a range of machining tasks where large-diameter drilling or secure clamping is required, including drilling, reaming and certain tapping operations when combined with appropriate tooling. The design supports integration into metalworking workshops, toolrooms and production lines that use standard SK taper spindles. Specifications such as 50 mm capacity and the standardised SK interface make it a practical choice where compatibility and repeatability are priorities, simplifying inventory and tooling decisions. For specification questions or to purchase the Vertex integrated self-tightening drill chuck through Metav Werkzeuge, contact our technical advisors at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: INT-13-SK50 GTIN: 4061905090929 ECLASS: 21020490 ETIM: EC002125 Facts Diameter: 50 mm Taper: SK-50 Weight: 3.9 kg Special features Integrated, self-tightening design Designed for spindle mounting Industrial-grade construction FAQ What taper interface is required for this chuck? The integrated self-tightening drill chuck is designed for an SK-50 taper spindle and is supplied as the Vertex INT-13-SK50 unit. Which maximum tool diameter does the chuck accept? The chuck accepts tooling up to 50 mm nominal diameter, suitable for larger drilling and reaming operations. Is the chuck suitable for heavy-duty machining? Yes, the Vertex integrated chuck is built for industrial use, its robust construction and mass (3.9 kg) supporting demanding machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Integrated Self‑Closing Drill Chuck SK‑30, Self‑Tightening - Vertex
Benefit from the robust combination of an integrated self-clamping mechanism and a 50 mm capacity on an SK‑30 taper for reliable, repeatable tool holding; order the INT-13-SK30 directly via Metav Werkzeuge or ask our consultants if needed. INT-13-SK30 Drill chuck — integrated, self-clamping, 50 mm (Vertex) The INT-13-SK30 is a durable, integrated drill chuck designed for secure tool retention in machining setups using an SK‑30 spindle taper. Integrated self-clamping design 50 mm nominal capacity SK‑30 taper compatibility Robust construction, 1.34 kg Secure, efficient clamping for consistent machining results The integrated, self-clamping mechanism delivers dependable holding force and reduces setup steps, improving cycle reliability in repetitive drilling operations. Designed for use with machines equipped with an SK‑30 taper, this chuck provides stable axial alignment and helps to keep runout within acceptable limits for routine machining. The compact design supports quick tool changes and contributes to shorter preparation times, which benefits production throughput and workflow efficiency. Built for workshop versatility and simple integration Installed directly on an SK‑30 spindle, the chuck offers a straightforward interface between spindle and tooling. The 50 mm capacity covers a broad range of drill diameters used in general metalworking and maintenance tasks, allowing a single toolholder to serve multiple operations. The integrated configuration eliminates the need for separate adapters in many setups, simplifying inventory and reducing handling. Compatibility with standard machine fittings ensures smooth integration into existing tool cycles. Robust design that supports quality and repeatability Weighing 1.34 kg, the chuck balances mass and rigidity for secure gripping without excessive spindle load. The construction emphasises dependable performance under normal workshop conditions, making it suitable for small to medium series production and repair environments. Supplied by Vertex, the component aligns with industry expectations for consistent manufacturing quality and traceability, supporting a stable machining process and predictable results. Contact Metav Werkzeuge for detailed compatibility checks and reliable supply from our Emmerich facility; Fachberatung and fast procurement are available through Metav Werkzeuge. Technical data Article number: INT-13-SK30 GTIN: 4061905088599 Brand: Vertex SKU: INT-13-SK30 Facts Diameter: 50 mm Weight: 1.34 kg Taper: SK‑30 ECLASS: 21020490 ETIM: EC002125 Special features Integrated self-clamping mechanism Suitable for standard machining spindles with SK‑30 taper Designed for general drilling and tool retention applications FAQ What machines is this chuck compatible with? The chuck is intended for machines fitted with an SK‑30 spindle taper; the INT-13-SK30 mates directly to that taper for straightforward mounting. What is the maximum drill shank the chuck accepts? The nominal capacity of the chuck is 50 mm, suitable for a wide range of drill diameters used in general metalworking. Is the chuck suitable for production environments? Yes. The integrated self-clamping design and robust build make the chuck appropriate for small to medium series production and routine workshop use. Who manufactures this component? The chuck is manufactured by Vertex and supplied under the Vertex brand as the INT-13-SK30 drill chuck. How heavy is the component and does weight affect spindle load? The chuck weighs 1.34 kg; this mass provides rigidity for secure tool holding while remaining within typical spindle load expectations for its taper class. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Integrated Self‑Holding Drill Chuck JC‑32 - Vertex
Benefit from secure, repeatable clamping thanks to the JC-32 taper, the integrated self-tightening mechanism and a compact 50 mm body for stable tool holding; order the INT-13-JC32 through Metav Werkzeuge or consult their specialists for spindle compatibility. INT-13-JC32 Drill Chuck (JC-32 taper, 50 mm) — Vertex The INT-13-JC32 is an integrated, self-tightening drill chuck with a JC-32 taper, designed for precise clamping on compatible machine spindles. Integrated self-tightening mechanism JC-32 taper for direct spindle mounting 50 mm outer diameter for stability Robust 1.8 kg construction Stable, repeatable clamping for production use The INT-13-JC32 delivers precision clamping by combining a compact 50 mm diameter with a standard JC-32 taper, enabling a rigid connection to the spindle. The reduced offset and consistent seating minimise runout and contribute to reproducible hole quality. For workshop planners and maintenance teams, the result is fewer reworks and more predictable tool life, which supports efficient production planning and cost control. How the self-tightening mechanism increases safety and uptime The integrated self-tightening design converts rotational forces into additional gripping action, reducing the likelihood of tool slippage under load. This mechanical behaviour improves process security during intermittent or continuous drilling operations. Maintenance intervals are simplified because the clamping principle does not rely on external tightening devices; routine inspection and basic cleaning are sufficient to maintain reliable performance. Compatibility, handling and quality assurance With a JC-32 taper interface and a modest mass of 1.8 kg, the chuck is straightforward to mount on machines that accept the JC-32 standard, offering balanced handling for operators and technicians. The compact outer diameter of 50 mm supports stable tool guidance while keeping the clamping footprint small, which is advantageous in confined tooling fixtures. Delivered by Vertex and available via Metav Werkzeuge, the component benefits from a supply chain geared towards reliability and consistent product quality. For spindle compatibility checks or to request detailed specifications for the Vertex INT-13-JC32 drill chuck, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to secure the correct solution for the machining setup Technical data Article number: INT-13-JC32 GTIN: 4061905092152 eCl@ss: 21020490 Facts Taper: JC-32 Outer diameter: 50 mm Weight: 1.8 kg Special features Integrated, self-tightening mechanism Category: Drill chuck Manufacturer: Vertex FAQ What taper does this chuck use? The INT-13-JC32 uses a JC-32 taper for direct spindle mounting and precise axial alignment. How does the integrated self-tightening mechanism work? The INT-13-JC32 converts rotational force into additional gripping power, increasing clamping effectiveness as the spindle turns and helping to prevent tool slippage. What are the main dimensions and weight? The drill chuck has an outer diameter of 50 mm and a weight of 1.8 kg, as specified for the INT-13-JC32. Is the chuck suitable for precision drilling tasks? Yes; the combination of a JC-32 taper and compact design provides stable tool holding and repeatable results for precision drilling applications. What maintenance is required for reliable operation? Regular inspection, light cleaning of the seating surfaces and routine lubrication of moving parts are recommended to preserve the performance of the INT-13-JC32. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Integrated Self‑Locking Drill Chuck MT‑4 - Vertex
Reliable clamping combined with an integrated self‑tightening mechanism and a standard MT‑4 taper delivers stable drilling and straightforward spindle mounting for fast production. The compact 50 mm clamping range and balanced 1.8 kg mass reduce vibration and support consistent hole quality. Order the INT-13-MT4 drill chuck directly via Metav Werkzeuge or ask our consultants if needed. INT-13-MT4 drill chuck by Vertex — integrated self‑tightening, 50 mm The INT-13-MT4 drill chuck is an integrated, self‑tightening chuck designed for secure tool holding on machines with an MT‑4 taper, ideal for workshop and light production drilling tasks. Integrated self‑tightening mechanism 50 mm clamping diameter MT‑4 taper for standard spindles Robust 1.8 kg construction Consistent clamping for productive machining The integrated, self‑tightening design ensures the clamping force increases automatically under load, reducing the risk of tool slippage and minimising rework. Where consistent hole quality matters, a stable grip translates directly into higher first‑pass yields and less scrap. The chuck’s 50 mm capacity accommodates a broad range of common drill shanks while the balanced mass supports reduced vibration and steadier cutting conditions. These attributes together improve cycle reliability and support predictable machining outputs. Designed for straightforward spindle compatibility Fitted with an MT‑4 taper, the toolholder mounts on any machine spindle compatible with that Morse taper size, simplifying tool changes and integration into existing setups. The MT‑4 designation refers to a standardised taper dimension that guarantees repeatable axial alignment and concentricity when correctly seated. For operations migrating tools between machines, the familiar taper format reduces adaptation effort and helps maintain precision without specialised adaptors. Low‑maintenance operation and workshop efficiency Constructed to withstand routine workshop use, the chuck’s compact design and balanced weight of 1.8 kg favour long service life and reduced bearing wear in the host spindle. The self‑tightening function reduces the need for constant torque checks during production runs, lowering intervention frequency and saving operator time. Supplied as a ready‑to‑install toolholder, the device supports fast changeovers and contributes to smoother process flows, especially where reliable clamping is essential for repeatability. For enquiries about spindle compatibility or to secure supply from Metav Werkzeuge in Emmerich, contact our consultants about the Vertex INT-13-MT4 drill chuck and benefit from trusted workshop delivery. Technical Data Article number: INT-13-MT4 GTIN: 4061905093128 Manufacturer: Vertex Facts Clamping diameter: 50 mm Weight: 1.8 kg ECLASS: 21020490 ETIM: EC002125 Special features Integrated self‑tightening mechanism MT‑4 taper Product type: drill chuck Brand: Vertex FAQ What taper is required to mount this chuck? The chuck is supplied with an MT‑4 taper, so a spindle or adaptor accepting an MT‑4 Morse taper is required for correct mounting of the INT-13-MT4 drill chuck. What clamping range does the chuck offer? The device provides a 50 mm clamping diameter, allowing it to hold a wide range of common drill shanks for general drilling tasks. Is the chuck suitable for production use with frequent tool changes? Yes, the integrated self‑tightening design and compact construction of the Vertex INT-13-MT4 drill chuck are intended to support repeated cycles and reduce the need for frequent manual retightening. How heavy is the chuck and does weight affect spindle performance? The chuck weighs 1.8 kg; this balanced mass helps reduce vibration and is compatible with typical workshop spindles when correctly mounted. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Keyless Integrated Drill Chuck SK-40 Three-Point Self‑Centring, 1.9kg - Vertex
Benefit from the combination of a compact 50 mm clamping capacity and the integrated, self‑tightening mechanism for consistently secure toolholding; the SK40 taper ensures direct compatibility with standard spindles while the 1.9 kg mass adds stability during machining. Order the drill chuck directly via Metav Werkzeuge or ask our consultants if needed. INT-13-SK40 drill chuck – integrated self‑tightening, SK40 taper, 50 mm A robust INT-13-SK40 drill chuck designed to provide reliable, maintenance‑friendly clamping on SK40 spindles for workshop and CNC use. Integrated self‑tightening mechanism Compatible with SK40 taper spindles 50 mm clamping capacity Solid 1.9 kg mass for stability Improve process reliability with automatic clamping force The integrated self‑tightening design converts spindle rotation into increased jaw clamping force, reducing the risk of slipped tools under load and improving repeatability across batches. For production environments where downtime and rework are costly, this mechanism delivers a tangible improvement in operational reliability: the chuck grips securely as torque increases, reducing manual re‑adjustment and preserving tool life through consistent centring. The design is particularly beneficial when frequent tool changes are required and when secure high‑torque retention matters. Fast integration and proven spindle compatibility Fitted to a standard SK40 taper, the chuck allows straightforward mounting on compatible spindles without additional adapters, shortening setup time and simplifying tool inventory. The 50 mm clamping range covers a broad spectrum of drill and tooling diameters commonly used in general workshop and light industrial machining, enabling versatile application across tasks. Compatibility with established spindle standards supports a predictable retrofit route for existing machine fleets, helping to keep spindle interfaces uniform and maintenance straightforward. Stability and handling that support precision outcomes At a mass of 1.9 kg, the chuck adds rotational inertia that helps dampen vibration and stabilise cutting conditions, which contributes to cleaner hole quality and reduced runout. The compact footprint and robust construction are aimed at dependable daily use, offering a solid basis for repeatable production results. Where consistent concentricity and reduced tool chatter feed into part quality, the chuck’s mechanical simplicity and sturdy build translate into fewer inspection rejects and steadier throughput. Contact Metav Werkzeuge for specification support on SK40 mounting and to arrange delivery of the Vertex INT-13-SK40 drill chuck; reach our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: INT-13-SK40 GTIN: 4061905089527 Manufacturer: Vertex Data Diameter: 50 mm Weight: 1.9 kg eClass: 21020490 ETIM: EC002125 Special features SK-40 taper Integrated, self‑tightening design Category: Vertex FAQ What taper does the chuck use and how is it mounted? The chuck uses an SK40 taper and is mounted directly to SK40 spindles; the INT-13-SK40 drill chuck is designed for direct spindle integration without bespoke adapters. What clamping range does the chuck support? Clamping capacity is 50 mm, allowing the chuck to accommodate a wide range of drills and small tooling in general workshop and production tasks. How does the self‑tightening mechanism benefit machining? The integrated self‑tightening feature increases jaw force with spindle torque, improving tool retention and reducing the likelihood of slippage during heavy cutting with the Vertex INT-13-SK40. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm LED Flood Light 50W 800–4500 lm 14.8V 5200 mAh IP54 Adjustable Angle Powerbank Function - TECWERK
Take advantage of a compact, robust 50 W lighting solution that combines high luminous output with practical mobility; the integrated 5200 mAh Li‑Ion battery and powerbank function ensure continued operation and device charging on site. Order the unit directly via Metav Werkzeuge or contact their consultants for tailored advice. TECWERK LED Floodlight 50 W – 800–4,500 lm, 14.8 V Li‑Ion, IP54 The TECWERK LED Floodlight 50 W is a portable worklight designed for workshop and site use, offering adjustable beam control and a built‑in powerbank for versatile illumination and device charging. 120 SMD LEDs for even illumination Adjustable beam: vertical 90° and horizontal 180° Integrated powerbank function for device charging IP54 housing and practical handle for site use Reliable, high‑output lighting for professional tasks The compact lamp delivers 800–4,500 lm from 120 SMD LEDs driven by 50 W of power, providing a choice between concentrated and broad illumination depending on the task. The internal 5200 mAh Li‑Ion battery at 14.8 V keeps the unit operational where mains access is limited, while the IP54 rating protects against dust and splashing water—suitable for demanding workshop and outdoor applications. The spec-driven design supports productivity by offering a strong, consistent light source that helps maintain workflow under variable site conditions. Precise illumination and comfortable colour rendering Thanks to the adjustable beam (vertical 90° and horizontal 180°) the lamp can be set for targeted task lighting or wide-area coverage, reducing the need for multiple fixtures. The neutral 5700 K colour temperature yields daylight‑like illumination that supports accurate visual inspection and reduces eye strain during fine work. These characteristics make the light appropriate for preparatory tasks, inspections and any situation where both intensity and colour fidelity matter. Practical features for everyday site use Built with a robust housing and a practical handle, the worklight is engineered for portability and frequent handling on site. The unit includes a visible battery indicator to monitor charge status and a powerbank function to recharge mobile devices or tools, adding operational flexibility. With a typical recharge time of approx. 3.5 h, the lamp is ready for repeated use after a short downtime. The device is noted as subject to inspection, ensuring that periodic safety checks and documentation are supported for professional environments. For technical advice or to request a tailored supply, contact Metav Werkzeuge – Metav’s specialists can advise on matching illumination solutions to specific workshop or site requirements; reach them at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000873354NW Model: TECWERK LED floodlight 50 W 800–4,500 lm Brand: TECWERK Core figures Power: 50 W Light output: 800–4,500 lm LEDs: 120 SMD Battery: 5,200 mAh, 14.8 V Li‑Ion Colour temperature: 5,700 K Charge time: approx. 3.5 h Beam angles: vertical 90°, horizontal 180° Protection class: IP54 Inspection required: yes Special features Adjustable beam Battery indicator Robust housing and practical handle Powerbank function Universal, portable use FAQ What is the typical light output range of this worklight? The worklight provides a variable light output between 800 and 4,500 lumens, enabling both focused task lighting and broad area illumination. How long does the battery take to recharge? The internal battery of the TECWERK LED Floodlight recharges in approximately 3.5 hours under normal charging conditions. Can the unit be used in wet or dusty environments? The floodlight has an IP54 protection rating, which makes it resistant to dust ingress and splash water—suitable for most site and workshop conditions. Does the light offer device charging capability? Yes, the integrated powerbank function allows the floodlight to supply power to USB‑charged devices, adding practical on‑site utility. Is a safety inspection required for this product? The product is listed as inspection required, meaning it should be included in regular safety and electrical checks as per workplace regulations. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50mm Magnetic Chuck 26 N Holding Force, 100x175mm - Vertex
Take advantage of a compact footprint and strong magnetic hold for dependable clamping in busy workshops; the combination of a 100 x 175 mm working area, 50 mm profile and a substantial holding force of 26 ensures stable, repeatable set-ups and reduced rework. Order the VG-407 magnetic chuck directly via Metav Werkzeuge or ask our consultants for tailored advice. Vertex VG-407 Magnetic Chuck — compact 100 x 175 mm, 50 mm height The VG-407 Magnetic Chuck is a compact magnetic workholding solution engineered for secure, low-profile clamping in machine shops and precision workshops. Compact 100 x 175 mm footprint 50 mm height for low-profile clamping Holding force 26 for secure workholding Efficient, measurable workholding for consistent results The VG-407 offers a compact footprint that suits crowded machine tables and small fixtures while maintaining a holding force 26 that delivers measurable stability during machining operations. By concentrating on the core parameters—100 x 175 mm working area and low profile—this magnetic chuck reduces set-up complexity, helping to shorten cycle times and decrease scrap rates. The design supports repeatable positioning, so end results are consistent and inspection rework is minimised, which in turn contributes to a more efficient production flow. Low-profile design that speeds up set-up and handling A 50 mm height together with a moderate mass of 7.2 kg means the unit sits low on the machine table and is easy to manoeuvre when reconfiguring fixtures. The compact mass aids in safe handling while the low profile improves access for milling heads and grinding wheels, making clamping and unclamping faster. The result is a practical balance between rapid set-up and operational stability: fewer interruptions during batch changes and reduced time between operations translate directly into increased shop-floor productivity. Practical reliability backed by a trusted supplier Supplied under the Vertex name, this magnetic workholding plate combines straightforward functionality with workshop durability. Metav stands for democratisation of precision and supports this product with a reliable European supply chain and expert advice from Emmerich. That combination of reliable supply and localised stock control contributes to predictable lead times and uninterrupted production planning. For workshops seeking a dependable, compact magnetic chuck for regular use, the VG-407 represents a pragmatic choice built around practical benefits rather than complexity. Contact Metav Werkzeuge for personalised advice and to secure the VG-407 magnetic chuck for prompt dispatch from Emmerich. Technical details Article number: VG-407 GTIN: 4061905083853 Brand: Vertex Core specifications Dimensions: 100x175mm Height: 50mm Weight: 7.2 kg Magnetic force: 26 Special features ECLASS: 21020809 Category: Vertex FAQ What is the VG-407 best used for? The VG-407 magnetic chuck is intended for magnetic workholding tasks in machine shops and precision workshops where a compact, low-profile clamping solution is required. What are the physical dimensions and mass? The magnetic chuck measures 100 x 175 mm, has a height of 50 mm and a weight of 7.2 kg. How strong is the magnetic hold? The VG-407 provides a holding force value of 26, offering secure clamping for routine machining and inspection processes. Is the VG-407 suitable for frequent set-up changes? Yes. The unit’s low profile and manageable mass support rapid set-up and easier handling during frequent fixture changes. Which brand manufactures the chuck and what is the SKU? This magnetic chuck is produced by Vertex and stocked as SKU VG-407 for convenient ordering and tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck Fine Pole Distribution, 28 kgf Holding Force - Vertex
Benefit from precise, repeatable workholding thanks to the combination of fine pole distribution, strong magnetic clamping force and a compact 50 mm profile for stable machining operations. Order the magnetic chuck directly via Metav Werkzeuge or consult the specialists if additional information is required. VGF-1545B Magnetic chuck (Type B) — fine pole distribution, compact 50 mm height (Vertex) A VGF-1545B magnetic chuck designed for precision workholding in machining and inspection, featuring a fine pole pattern that improves contact and grip on small or irregular ferrous parts Fine pole distribution for uniform clamping Robust steel body, height 50 mm High magnetic clamping force for stability Vertex quality, SKU VGF-1545B Improved precision and repeatability on critical components The fine pole pattern delivers a larger number of smaller contact zones, which results in more uniform clamping and reduced local deformation of workpieces. This effect benefits finishing operations and measurement tasks by promoting repeatable positioning and minimising runout. The design translates directly into fewer reworks and improved process reliability when holding delicate or thin ferrous parts. Compact design that speeds setup and keeps workflows efficient With a low profile of 50 mm and a total mass of 26 kg, the workholding plate occupies minimal vertical space while offering a secure base for machining. The compact footprint facilitates faster fixturing and makes it simpler to integrate into existing set-ups or inspection benches. The result is a measurable improvement in throughput and a reduction in non-productive time for changeovers. Robust construction for consistent performance and low upkeep Designed with industrial use in mind, the chuck combines a solid build with a magnetic system rated at magnetic force: 28, ensuring stable workholding under cutting loads. Routine cleaning of the pole faces and inspection of the pole distribution are the primary maintenance tasks; these simple procedures preserve the magnetic clamping force and extend service life. The robust approach reduces long-term downtime and supports a dependable production flow. Practical benefits translated into production gains By choosing this magnetic workholding solution, shops gain a balance of precision, stability and compactness that supports both small-batch finishing and repeatable measurement tasks. The fine pole distribution expands the range of geometries that can be held securely, while the strong magnetic attraction lowers the need for additional mechanical clamps. For operations prioritising surface quality and dimensional accuracy, this magnetic chuck offers a clear operational advantage. For trusted Vertex workholding with reliable delivery and local expertise, contact Metav Werkzeuge in Emmerich for tailored advice and supply coordination. Technical data Article number: VGF-1545B GTIN: 4061905086274 Brand: Vertex Classification: 21020809 Facts Weight: 26 kg Height: 50 mm Magnetic force: 28 Type: B Special features Fine pole distribution Magnetic workholding plate Compact, low-profile design FAQ What is the primary application of this magnetic chuck? The VGF-1545B magnetic chuck by Vertex is intended for secure workholding of ferrous workpieces during machining and inspection, offering repeatable positioning and improved surface quality. Can non-ferrous parts be clamped with this workholding plate? Non-ferrous parts cannot be held magnetically; the magnetic chuck is suitable for ferrous materials, while non-ferrous components require mechanical clamping or dedicated fixtures. How does the fine pole distribution affect smaller workpieces? The fine pole distribution increases the number of contact points, improving grip on small or irregular parts and reducing the likelihood of local deformation, which supports finer surface finishes and stable cutting conditions. What basic maintenance is required to keep performance consistent? Regular cleaning of the pole faces and periodic inspection of the pole distribution are recommended; these measures maintain the magnetic clamping force and help preserve the service life of the VGF-1545B. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck Fine Pole Distribution, 28 N/cm² Holding Force - Vertex
Take advantage of the combination of fine pole distribution, a magnetic force of 28 and a robust 50 mm height for consistent, distortion-free workholding; order the VGF-1540B magnet chuck directly via Metav Werkzeuge or contact our consultants for tailored advice. VGF-1540B Magnet chuck — fine pole distribution, 50 mm height The VGF-1540B is a magnet chuck engineered for precision workholding with a fine pole distribution, suitable for machining and grinding tasks where uniform clamping and minimal part distortion are essential. Fine pole distribution for thin workpieces High magnetic force of 28 for firm hold Robust 50 mm height for stability Solid 24 kg mass dampens vibration Secure clamping for delicate and flat parts A fine pole distribution creates a more even magnetic field across the work surface, reducing localised clamping pressure and lowering the risk of surface marks on thin or finely finished parts. This results in a steadier setup during grinding and light machining, improving surface quality and reducing rework. The design is particularly suitable where consistent contact and low deformation are required, delivering measurable gains in process reliability. Stable base for precision machining The chuck’s construction, with a 50 mm height and a weight of 24 kg, provides a stable platform that helps absorb and damp machining forces. Combined with a magnetic force of 28, the unit offers reliable retention of ferrous workpieces during moderate cutting and finishing operations. The overall effect is improved positional stability and reduced vibration, which supports tighter tolerances and better repeatability on the machine table. Practical workshop integration and upkeep The magnetic clamping plate is straightforward to incorporate into standard setups and benefits from low mechanical complexity. Routine care mainly requires keeping the pole faces and the workpiece contact area clean and free from swarf, coolant residues and rust; this preserves holding performance and extends service life. For specialist applications or questions about mounting and compatibility with specific machines, consult Metav Werkzeuge’s technical team for precise guidance. For reliable precision and straightforward integration, order the Vertex VGF-1540B magnet chuck via Metav Werkzeuge — our Emmerich-based team can advise on suitability and setup at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VGF-1540B GTIN: 4061905095412 ECLASS: 21020809 Type: B Measurements & weight Height: 50 mm Weight: 24 kg Magnetic force: 28 Features Product: Magnet chuck Pole configuration: Fine pole distribution Manufacturer: Vertex FAQ What kinds of workpieces are suitable for this magnetic chuck? Magnetic chucks like the VGF-1540B are best for ferrous (magnetic) and flat workpieces; the fine pole distribution improves support for thin and precision-ground parts. How does the fine pole distribution affect surface finish? A fine pole layout spreads clamping force more evenly, reducing pressure peaks and the likelihood of marking or distortion during machining with the VGF-1540B. Is the VGF-1540B heavy enough for stable machining? Yes, the chuck’s mass of 24 kg and a 50 mm height provide beneficial stability and vibration damping for many finishing and light machining tasks. What routine maintenance is required? Keep the pole faces and contact surfaces clean and dry; regular inspection for debris and corrosion will maintain the magnetic performance of the VGF-1540B over time. Can this chuck be used on grinding machines? The design and fine pole distribution make the VGF-1540B suitable for grinding operations where secure, uniform holding of flat ferrous components is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com