Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
50mm Vertical Clamp Automatic Height Adjustment, 2,500 N - BESSEY
Take advantage of a compact, workshop-ready solution that combines automatic clamp height adjustment with a reliable 2,500 N clamping force for consistent part retention; order directly via Metav Werkzeuge or consult the team for specification matching. BESSEY STC-VH Group 50 Vertical Clamp – automatic clamp height adjustment, horizontal base The BESSEY STC-VH Group 50 vertical clamp is a compact clamping device with a horizontal foot designed for stable mounting in fixtures and jigs; ideal for repeatable positioning and secure clamping in metalworking and general workshop applications. Automatic clamp height adjustment Max clamping force 2,500 N Horizontal base for flat mounting Size 50 with H1 = 162 mm Consistent, measurable clamping performance for production use The vertical clamping mechanism delivers a maximum clamping force of 2,500 N, ensuring secure retention of workpieces during machining, welding or assembly processes. The automatic clamp height adjustment compensates for minor variations in component thickness, reducing setup time and the need for shims. For procurement and shop-floor planners, the combination of precise force rating and self-adjusting height translates into fewer interruptions, less rework and a predictable throughput rate. Technical novices benefit from a simple performance indicator: higher Newton values mean firmer hold; this model offers industrial-grade holding power in a compact footprint. Quick installation and stable mounting reduce downtime Fitted with a horizontal base, the clamp is intended for flat mounting on worktops, plates or modular fixturing systems, enabling a rapid mechanical interface with common workshop fixtures. The Size 50 designation and the H1 dimension of 162 mm give a clear reference for integration into existing set-ups and CAD layouts. Fast mounting and predictable geometry shorten the time between design and production, while the modest mass of 0.43 kg per unit keeps handling and changeover simple. The overall result is improved operational efficiency: fewer steps to secure a part and faster transitions between operations. Robust, straightforward design for everyday reliability Built for regular workshop use, the unit combines durability with uncomplicated maintenance: the automatic height-compensation function eliminates frequent manual adjustments, and the compact construction withstands the rigours of daily handling. The clamp’s straightforward mechanism helps minimise training needs for operators and supports consistent process quality. Where traceable performance matters, the clear values for clamping force and H1 height allow engineering teams to specify fixtures with confidence and document expected results for quality control. Choose the BESSEY STC-VH Group 50 vertical clamp for dependable clamping performance and straightforward integration — contact Metav Werkzeuge for tailored advice or to confirm fitment for existing fixtures. Technical data Article number: 4000831137NW SKU: 4000831137NW Type: STC-VH Product type: Vertical clamp Label: Senkrechtspanner STC-VH Gr.50 horizontal foot BESSEY Manufacturer: BESSEY Packaging unit: 1 Weight: 0.43 kg Core technical data Maximum clamping force: 2,500 N Size: 50 H1: 162 mm Special features Automatic clamp height adjustment Horizontal base (waagrechter Fuß) Compact workshop mounting design FAQ What clamping force can be expected from this clamp? The BESSEY STC-VH Group 50 vertical clamp provides a maximum clamping force of 2,500 N, suitable for secure retention in many metalworking and assembly tasks. Is the clamp suitable for variable workpiece thicknesses? Yes, the automatic clamp height adjustment built into the STC-VH allows compensation for minor variations in part height without manual shim work. How is the clamp mounted? The unit features a horizontal base for flat mounting on plates or fixture rails; the Size 50 and H1 = 162 mm dimensions simplify integration into existing setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x250x38mm Step Clamp M24 Bolt, 26mm T-Slot Compatible - Vertex
Make clamping reliable and repeatable with a robust M24 fastening and compact footprint. The combination of a secure bolt connection, compatibility with a 26 mm T-slot and a weight of 2.67 kg supports stable machining setups and reduces repositioning work. Order directly via Metav Werkzeuge or consult Metav's team for specification advice. Step Clamp — robust M24 bolt clamp for 26 mm T-slots by Vertex The Step Clamp is a compact clamping element designed for secure fixturing in machining centres where a 26 mm T-slot is used; suitable for repeatable set-ups and modular fixturing arrangements Robust M24 bolt fastening Compatible with 26 mm T-slots Compact 50 x 250 x 38 mm footprint Weight 2.67 kg for stable clamping Secure and repeatable clamping for production The M24 fastening provides a high clamping integrity that lowers the risk of part movement during machining. With a compact footprint of 50 x 250 x 38 mm, the clamp balances contact area and accessibility, enabling reliable holds without excessive bulk on the table. For production environments this means fewer interruptions for rechecking setups and a measurable improvement in process stability. The clamping mass of 2.67 kg contributes to static stability and reduces vibration transfer during cutting operations. Fits modular T-slot systems and speeds setup Designed for a 26 mm T-slot, the clamp integrates easily into common modular fixturing systems. The T-slot compatibility simplifies repositioning and reuse across jobs, reducing set-up time and allowing a single clamping element to serve multiple fixtures. For users unfamiliar with T-slots: the design lets the bolt engage beneath the table profile so the clamp can be tightened from above while remaining secure laterally. This practical arrangement supports efficient work flows on milling machines and machine centres. Durable, no-fuss design that suits workshop routines The straightforward geometry and proven fastening size keep maintenance and inspection simple: no complex moving parts, just a single threaded connection to secure the workpiece. That simplicity makes the clamp easy to integrate into existing tooling kits and reduces downtime during changeovers. As part of a systematic clamping strategy, this element supports consistent positioning and contributes to predictable machining results — attributes valued in both small workshops and larger production facilities. Choose Vertex clamping solutions from Metav Werkzeuge to optimise fixture reliability; Metav Werkzeuge in Emmerich offers specification support and practical advice for integrating this clamp into existing setups Technical Data Article number: 6437 GTIN: 4061905089664 eClass: 21170107 Core specifications Dimensions: 50 x 250 x 38 mm Weight: 2.67 kg T-slot width: 26 mm Bolt thread: M24 Special features Product name: Step Clamp Manufacturer: Vertex SKU: 6437 FAQ What T-slot width is required for this clamp? The Step Clamp requires a 26 mm T-slot; the design engages beneath a slot of this width to provide lateral stability. Which bolt thread is used to secure the clamp? The clamp is fastened with an M24 bolt; this standard thread size ensures strong clamping force and straightforward replacement of bolts if needed. What are the clamp's external dimensions and mass? Dimensions are 50 x 250 x 38 mm and the weight is 2.67 kg, values that balance rigidity and compactness for machine-table use. Is this product suitable for serial production work? Yes. The repeatable clamping and robust fastening of the Step Clamp support reliable fixtures for serial machining and frequent changeovers. Who manufactures the clamp and what is the SKU? The clamp is produced by Vertex and sold under SKU 6437, ensuring traceability and compatibility with Vertex clamping accessories. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50x32mm Flange M24x3mm Thread, 0.3kg - Vertex
Compact 50×32 mm dimensions and a secure M24×3 mm metric thread give a reliable connection while keeping handling simple at just 0.3 kg; combine these characteristics for consistent assembly performance. Order the part directly via Metav Werkzeuge or consult the technical team for compatibility checks. Flange 4518 – compact metric threaded flange with M24×3 mm connection by Vertex Flange 4518 serves as a compact mounting component for mechanical assemblies and fixtures, designed for secure metric-threaded connections in workshop and production environments. Compact 50×32 mm flange format Secure M24×3 mm threaded connection Lightweight at 0.3 kg for easy handling Manufactured by Vertex for reliable use Precise mounting in confined machine spaces The compact 50×32 mm footprint allows integration where space is limited while maintaining mechanical stability. The metric M24×3 mm thread provides a standardised interface for threaded assemblies; this ensures repeatable clamping and straightforward interchangeability with matching components. The design reduces wobble and play, supporting consistent alignment and improving overall process reliability. Engineers benefit from the predictable behaviour of a standard metric connection when planning fixtures or modular mounting systems. Practical handling that speeds assembly A mass of 0.3 kg keeps the component light enough for quick manual handling yet substantial enough for stable placement during installation. The reduced weight shortens assembly cycles and minimises strain during repetitive tasks, which supports higher throughput on the shop floor. The simple geometry of the part promotes rapid positioning and fastening, contributing to measurable time savings in fixture assembly and maintenance operations. Less fiddly handling translates into fewer stoppages and a smoother production flow. Traceability and workshop readiness for confident sourcing Identification by SKU 4518 and GTIN 4061905093371 aids stock management and reduces ordering errors, while the Vertex name signals a recognised manufacturer pedigree. The standard metric thread and compact format make the component versatile across various fixture designs and accessories, simplifying procurement and compatibility planning. Metav’s role as a quality filter for the European market adds an extra layer of assurance, ensuring that sourced components meet practical requirements for everyday workshop use. Contact Metav Werkzeuge for stock availability and technical advice on Vertex flange 4518 to confirm fitment and lead times Technical data Article number: 4518 GTIN: 4061905093371 ECLASS: 37029205 Manufacturer: Vertex Core specifications Dimensions: 50×32 mm Weight: 0.3 kg Thread: M24×3 mm Materials & features Brand: Vertex Category: Vertex Compact metric threaded flange SKU 4518 FAQ What thread specification does this flange use? The flange 4518 uses a metric M24×3 mm thread suitable for standard M24 fittings. Are the dimensions suitable for compact fixtures? Yes. The 50×32 mm format of the Vertex flange (SKU 4518) is intended for confined installation spaces. How heavy is the component and what does that mean for handling? Weight is 0.3 kg, which facilitates quick manual handling and reduces assembly time without compromising stability. How can the part be identified for ordering? Identification via SKU 4518 and GTIN 4061905093371 ensures accurate ordering; the part is supplied by Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50x32mm Flange With 1-8" Thread, 0.12kg - Vertex
Take advantage of the combination of precise 1-8" threading, a compact 50 x 32 mm footprint, and lightweight construction for reliable mechanical connections and streamlined assembly processes. Order the flange directly via Metav Werkzeuge or consult the Metav advisors for integration guidance. Flange 4518I by Vertex — 1-8" thread, 50 x 32 mm compact flange The Flange 4518I is a compact flanged connector designed for precise coupling in machine assemblies and space‑restricted mounting situations Precision‑machined 1-8" thread Compact 50 x 32 mm flange footprint Lightweight 0.12 kg construction Vertex quality and SKU 4518I Precise fit reduces assembly time and rejects The 1-8" thread and defined 50 x 32 mm footprint ensure a reproducible mechanical interface that simplifies alignment during installation. A predictable mating surface reduces the need for repeated adjustments and minimises downtime on the production line. This precise coupling supports consistent torque transmission and helps to avoid uneven loads that can cause premature wear in serial production. Lightweight design improves dynamic performance With a mass of only 0.12 kg, the component contributes negligible inertial load to rotating or moving subassemblies, which helps to maintain dynamic balance and reduce bearing stress. The low weight also simplifies handling during assembly and reduces shipping mass for bulk orders. The combination of compact dimensions and reduced mass supports lean designs where every gram and millimetre count. Built for reliable mechanical connections in compact spaces The flanged connector is constructed for tight installation envelopes where a small footprint and defined thread interface are essential. The geometry of the part promotes stable clamping and a secure mechanical connection in confined assemblies. Where space constraints are decisive, the compact flanged connector provides a straightforward solution without compromising joint stability. Industrial sourcing and integration advantages Supplied under the Vertex designation, the item is suited to workshops and production facilities that prioritise repeatability and supply‑chain traceability. The clear SKU labelling and available technical imagery support parts management and simplify procurement decisions. Integration into existing assemblies is facilitated by the straightforward mechanical characteristics and documented dimensions. Contact Metav Werkzeuge for advice on integrating the Vertex flange 4518I into production systems and for order guidance from our warehouse in Emmerich Technical data Article number: 4518I GTIN: 4061905088506 Manufacturer: Vertex Facts Dimensions: 50 x 32 mm Weight: 0.12 kg Thread: 1-8" Special features ECLASS: 37029205 SKU: 4518I Technical drawing and detail images available FAQ What thread size does the flange use? The flange uses a 1-8" thread, which provides a defined mechanical interface for secure connections. What are the overall dimensions of the component? The flange measures 50 x 32 mm, a compact footprint suitable for space-restricted assemblies. Is the component lightweight enough for dynamic assemblies? Yes. The part weighs 0.12 kg, helping to reduce inertial load in rotating or moving systems. Can this flange be identified for procurement and inventory? The item is listed under SKU 4518I and GTIN 4061905088506, aiding traceability and ordering. Are technical drawings available for planning and installation? Yes. Technical drawing and detail images are provided to facilitate integration and quality checks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50x500 mm Runout Test Mandrel MK6 Roundness Accuracy 0.005 mm, Hardened Gauge Steel DIN 229 - Metav IndustryLine
Take advantage of the combination of high rotational accuracy, robust hardened-steel construction and standard-compliant design to speed up spindle alignment and reduce rework. Order the test mandrel directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Test Mandrel MT6 – 50 x 500 mm, Runout 0.005 mm (Metav IndustryLine) The Test Mandrel MT6 – 50 x 500 mm, Runout 0.005 mm is a hardened gauge-steel mandrel for precise runout testing and spindle alignment in machine tool maintenance and quality control. Runout accuracy 0.005 mm Hardened gauge steel construction MT6 taper for spindle checks Complies with DIN 229 Ensure spindle concentricity with micrometre-level certainty The mandrel delivers 0.005 mm runout, a tolerance that supports accurate spindle alignment and reliable concentricity checks on rotating tooling. This level of precision reduces the need for repeated adjustments and limits scrap caused by eccentric rotation. The controlled runout is particularly important when verifying high-speed spindles or precision chucks; by measuring and correcting the spindle axis early, downstream machining variances are minimised and process stability improves. The mandrel’s defined tolerance is a measurable input for quality documentation and corrective action. Built for repeatable workshop use and simple handling Constructed from hardened gauge steel, the mandrel combines rigidity with wear resistance for frequent inspection routines. The Ø50 x 500 mm working section and MT6 taper permit direct use with compatible spindle bores and test fixtures. The robust design and balanced mass distribution support steady measurements across the mandrel length, while the overall build conforms to DIN 229, assuring compatibility with established gauge and inspection practices. The unit’s total length of 715 mm and weight of 12 kg reflect a stable, workshop-friendly tool that remains firm during measurement without excessive operator strain. Practical application: how it integrates with inspection workflows Designed for runout testing and alignment tasks, the mandrel is ready for use in spindle diagnostics, chuck checks and machine acceptance tests. The tool seats in MT6 taper fittings and provides a precise reference for dial indicators or rotational measuring systems. When used as part of a corrective routine, the mandrel helps identify bearing play, taper wear or mounting errors quickly, allowing targeted maintenance rather than broad downtime. The sturdy material choice and standard compliance also facilitate traceable measurement protocols that fit into quality-management systems. Reliability from a trusted precision partner This mandrel is offered under the Metav IndustryLine, reflecting Metav’s focus on making high-precision tools accessible to workshops and production facilities across Europe. With a broad product range and local stocking in Emmerich, the supplier network supports consistent availability and straightforward logistics. Investing in a clearly specified test mandrel simplifies routine checks and contributes to predictable machine performance, which in turn supports on-time delivery and cost control in production. Contact Metav Werkzeuge in Emmerich on +49 2822 7131930 or info@metav-werkzeuge.com to arrange supply of the MT6 test mandrel (SKU M318.936) and obtain tailored technical advice Technical data SKU: M318.936 GTIN: 4054469183954 Type: MT6 Standard: DIN 229 Facts Mandrel diameter × length: Ø50 × 500 mm Total length: 715 mm Runout accuracy: 0.005 mm Weight: 12 kg Special features Material: hardened gauge steel Suitable for runout testing and spindle alignment Category: Lehren Brand: Metav IndustryLine FAQ What level of concentricity can be expected from this mandrel? The Test Mandrel MT6 – 50 x 500 mm, Runout 0.005 mm provides a runout accuracy of 0.005 mm, making it suitable as a tight reference for spindle and chuck checks. Which taper fits this mandrel for machine tool testing? This mandrel uses an MT6 taper, enabling direct seating in MT6-compatible spindles and fixtures for runout measurement. What material and standard compliance does the mandrel have? The mandrel is made from hardened gauge steel and complies with DIN 229, ensuring durability and conformity with established inspection practices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x50mm Mounting Bracket for LED Lamps, Aluminium - Vertex
Take advantage of a compact, cost-effective solution that combines a 50 x 50 mm right‑angle profile with a lightweight 0.19 kg construction for reliable LED lamp mounting. Order the bracket directly via Metav Werkzeuge or consult our product specialists for specification alignment. V-26 Mounting Bracket 50 x 50 mm – Right‑angle LED accessory by Vertex The V-26 is a compact right‑angle mounting bracket conceived for secure installation of LED lamps in workshop and industrial environments, providing a space‑efficient fixing point for lighting assemblies. 50 x 50 mm right-angle bracket Suitable for LED lamp installations Durable construction for stable mounting Lightweight at 0.19 kg for easy handling Secure support for LED fittings with a compact profile The right‑angle design provides a stable mounting point where alignment and rigidity matter. The compact 50 x 50 mm footprint minimises space consumption while offering a predictable axis for lamp orientation. This results in reduced assembly time and fewer alignment iterations on the production line, which supports higher process efficiency and fewer reworks. The robust geometry translates directly into lower downtime for lighting retrofits and maintenance cycles. Quick installation that suits workshop workflows Designed for straightforward attachment, the bracket's form factor permits fast positioning and fixing with standard workshop fasteners. The lightweight nature eases handling during repetitive tasks and reduces strain during installation, which is beneficial in high‑volume or overhead mounting situations. Clear, repeatable fixing points make it simpler to maintain consistent lighting angles across multiple stations, supporting uniform illumination and better working conditions. Practical choice for industrial and trade applications As an accessory compatible with LED lamps, the component fits into broader retrofit and new‑build scenarios where compact, reliable supports are required. The simple right‑angle mount integrates well with common fixtures and mounting rails, offering a pragmatic alternative for workshops and installers seeking a dependable bracket without added complexity. The product's straightforward specification aids procurement decisions and inventory management for technical stores and service departments. Contact Metav Werkzeuge to request delivery from our Emmerich warehouse or to discuss the Vertex V-26 mounting options with a product specialist Technical data SKU: V-26 GTIN: 4061905094798 Weight: 0.19 kg Category: Accessory for LED lamps Brand: Vertex Facts Dimensions: 50 x 50 mm Mass: 0.19 kg Special features Right‑angle bracket design Intended for LED lamp installation FAQ Is the bracket suitable for LED lamp installations? The V-26 by Vertex is specified as an accessory for LED lamps and is intended for secure, right‑angle mounting of lighting fixtures. What are the exact dimensions and weight of the bracket? The bracket measures 50 x 50 mm and has a mass of 0.19 kg, making it compact and lightweight for handling and installation. Can this bracket be used in workshop and industrial environments? Yes, the right‑angle geometry and compact profile make the bracket appropriate for workshop and industrial mounting where space efficiency and stable support are required. What material is the bracket made from? The available product data does not specify the material; material details should be confirmed from the technical datasheet or product specification prior to application. What identifiers are available for ordering and stock management? Article identification is available as SKU V-26 and GTIN 4061905094798 for procurement and inventory processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
51.5-81.5mm Clamping Locking Spindle With Spring, 500N Thrust, 725N Holding Force, Black Oxide - Kukamet
Take advantage of a compact, spring-loaded closure that delivers a holding force of 725 N and a clamping force of 500 N for reliable fixture security; order the B311-5-Y toggle latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. B311-5-Y Toggle latch clamp — spring-loaded, hook, horizontal base (Kukamet) The B311-5-Y is a spring-loaded toggle latch clamp designed for secure and repeatable fastening in jigs, fixtures and small production tooling where quick engagement and a compact footprint are required. Spring-loaded toggle action for reliable closure Horizontal-foot mounting for stable bench fixing Hook connection with adjustable arm 51.5–81.5 mm Holding force 725 N and clamping force 500 N Secure, repeatable clamping for production tasks The robust toggle mechanism provides a predictable clamping force and holding force, specified at 500 N and 725 N respectively, which translates into consistent part retention during machining, assembly or inspection cycles. In practical terms, clamping force denotes the pressure applied to the workpiece to perform secure fixing, while holding force describes the maximum resistance to separation once the clamp is engaged. This differentiation helps planners select a closure that meets both static and dynamic process requirements without over‑specifying hardware. Fast installation and straightforward adjustment to save setup time Equipped with a horizontal foot for bench or platen mounting and an adjustable arm ranging from 51.5 mm to 81.5 mm, the clamp offers simple alignment and repeatable positioning in fixtures. The 110 mm thread length permits fine tuning of the hook engagement, enabling quick setup changes between different workpiece heights. Because of its compact mass (approx. 0.98 kg), integration into mobile jigs or modular tooling is uncomplicated, reducing overall changeover time and improving line efficiency. Durable mechanism with a spring for secure engagement The unit’s spring-loaded feature ensures positive engagement under vibration or intermittent loads: the spring maintains preload on the hook so that the latch stays engaged until deliberately released. The component carries a blackened finish, which provides a uniform appearance and surface protection suited to workshop environments. The combination of a simple mechanical design and the spring retention reduces maintenance intervals and offers straightforward replacement of wear parts where necessary. Versatile applications across workshop and light industrial use As a compact lever-style clamp, this model suits repetitive clamping tasks in small-batch production, assembly stations and test rigs where rapid manual operation and dependable closure are priorities. The hook connection supports secure retention of irregular parts or removable fixtures, while the horizontal mounting keeps the actuator accessible without occupying excessive vertical space. Its characteristics make it well suited to both mechanical workshops and light industrial production lines seeking reliable, repeatable clamping. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet B311-5-Y toggle latch clamp into existing fixtures and to confirm stock availability from Emmerich. Technical data SKU: B311-5-Y GTIN: 4061905078699 Manufacturer: Kukamet Facts Arm range: 51.5–81.5 mm Thread length: 110 mm Maximum clamping force: 500 N Maximum holding force: 725 N Weight: 0.98 kg eClass: 21041718 ETIM: EC011973 Special features Spring-loaded mechanism Hook included Horizontal foot mounting Blackened finish Lever-type toggle clamp FAQ What is the difference between clamping force and holding force? Clamping force refers to the pressure the clamp applies to the workpiece (500 N for this model), while holding force is the maximum resistance to separation once engaged (725 N for the B311-5-Y toggle latch clamp). Can the arm length be adjusted for different workpiece heights? Yes, the clamp features an adjustable arm from 51.5 mm to 81.5 mm and a 110 mm thread length to fine-tune engagement for varying part heights. Is the latch suitable for use on assembly jigs with repeated manual operation? The spring-loaded design of the B311-5-Y ensures positive engagement and quick manual operation, making it suitable for repetitive tasks in assembly and fixturing. What mounting arrangement does this clamp require? The unit uses a horizontal foot mounting configuration, designed to be fixed to benches, plates or tooling bases where lateral access and compact installation are needed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
51.5-81.5mm Closing Clamp With Spring, 500N Thrust/725N Hold, Zinc-Plated - Kukamet
Compact, durable clamping with a 500 N maximum clamping force, zinc-plated corrosion protection and an adjustable arm of 51.5–81.5 mm ensures secure fixture retention and long service life; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Kukamet 311 Closure Clamp — horizontal-base, spring-loaded toggle clamp with adjustable arm The 311 closure clamp is a horizontal-foot toggle clamp designed for secure holding in jigs and fixtures across metalworking and workshop applications. Zinc-plated corrosion protection Spring-loaded action for secure closing Horizontal-foot mounting for stable installation Adjustable arm range 51.5–81.5 mm Consistent, measurable clamping performance for production workflows The lever mechanism provides a reliable clamping action with a maximum clamping force of 500 N and a holding force of 725 N, values that support repeatable fixing in small-series production and shop-floor fixtures. The distinction between clamping and holding force is significant: clamping force refers to the instant pressure applied during engagement, while holding force denotes the clamp’s ability to keep a workpiece secured under load. These numerical specifications enable planners to match the clamp to application requirements and calculate safety margins for machining or assembly operations. Built to resist workshop conditions and reduce downtime Constructed with a zinc-plated finish, the clamp offers enhanced resistance to corrosion in mixed workshop environments, extending service intervals and protecting contact surfaces. The spring-loaded latch ensures positive engagement and reduces the risk of accidental release during handling. The design with a horizontal foot facilitates low-profile mounting on fixtures or tooling plates, providing a compact mounting footprint while maintaining mechanical stability. Durability-focused features translate directly into lower maintenance effort and fewer production interruptions. Fast, adjustable clamping that integrates into fixtures The adjustable arm span (51.5–81.5 mm) and a threaded length of 110 mm allow precise setting of the clamp’s reach and engagement point, simplifying integration into existing jigs. The toggle principle locks the lever in position once closed, converting operator motion into a secured hold without constant manual pressure — a practical advantage for repetitive processes where cycle time and operator ergonomics matter. The clamp’s balanced mass (0.98 kg) and compact form make positioning and replacement straightforward within modular fixturing systems. Suitable use cases and benefits for workshop and light industrial settings This clamp is suited to fixture work in metal fabrication, light assembly, and woodworking jigs where reliable repeatability is required. The combination of adjustable reach, spring-loaded retention and corrosion resistance makes it particularly useful for fixtures subject to frequent changeover or variable stock sizes. By specifying a clamp with clear force ratings and mounting form, engineering teams achieve predictable behaviour in production setups and reduce rework caused by inconsistent clamping. Contact Metav Werkzeuge for a fixture consultation and specify the Kukamet 311 closure clamp (SKU 311-5-Y) for reliable, adjustable clamping solutions — Metav Werkzeuge’s advisors can confirm fitment and technical suitability for each project. Technical data SKU: 311-5-Y GTIN: 8682843520956 Eclass: 21041718 Brand: Kukamet Material: zinc-plated Mounting: horizontal foot Thread length: 110 mm Arm range: 51.5–81.5 mm Max clamping force: 500 N Max holding force: 725 N Weight: 0.98 kg Spring-loaded: yes With hook: yes Facts Article type: toggle/closure clamp Category: Spanner SKU identifier: 311-5-Y ETIM: EC011973 Special features Corrosion protection via zinc plating Adjustable arm for variable workpiece sizes Spring-assisted closing mechanism Horizontal-foot attachment for stable mounting Threaded connection for secure adjustment FAQ What is the adjustable arm range of the clamp? The clamp offers an adjustable arm range of 51.5–81.5 mm, enabling adaptation to varying workpiece dimensions. Which materials is this clamp suitable for in fixtures? The Kukamet 311 closure clamp is suitable for general fixture use across metallic and non-metallic assemblies where a mechanical toggle clamp is appropriate. How much clamping and holding force does the clamp provide? The device provides a maximum clamping force of 500 N and a holding force of 725 N, measured under standard test conditions. How is the Kukamet 311 mounted to a fixture plate? Mounting is via a horizontal foot, allowing low-profile attachment to plates or jigs with the threaded connection set to the required engagement. Is the clamp protected against corrosion? Yes, the clamp is zinc-plated, offering improved resistance to corrosion in workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
51.5x130x79.5mm V-Block Prism Block 0.05mm Accuracy, Grey Cast Iron - Vertex
Take advantage of durable fine-grained cast iron, high positional stability from its 4.3 kg mass and an accuracy 0.05 for consistent workholding; order the V-5V V-block directly via Metav Werkzeuge or ask our consultants if needed. V-5V V-block — fine-grained cast iron, compact 51.5 x 130 x 79.5 mm (Vertex) The V-5V V-block is a compact precision fixture for securing cylindrical workpieces during inspection and light machining. Fine-grained cast iron construction Precision alignment, accuracy 0.05 Compact 51.5 x 130 x 79.5 mm footprint Mass 4.3 kg for stable clamping Durable base for consistent setups The solid fine-grained cast iron body delivers stability and natural vibration damping, which reduces chatter during measurement and light machining. At 4.3 kg, the block provides a steady platform that minimises movement without additional clamping, improving repeatability across successive operations. The compact 51.5 x 130 x 79.5 mm profile keeps the fixture unobtrusive on the bench while providing reliable support for round components, translating into fewer re-clamps and shorter setup times. Precise alignment that simplifies measurement Engineered as a precision V-block, the geometry ensures repeatable seating of cylindrical parts for inspection and marking. The specified accuracy 0.05 gives a clear performance target for alignment-sensitive tasks; when combined with a rigid base and the vee profile, this enables reproducible positioning for gauging and non-critical machining. Built for workshop workflows, the design reduces the need for secondary fixturing and accelerates inspection procedures while maintaining consistent results. Practical workshop advantages and compatibility The compact vee block suits bench-top use, measuring tasks and light holding duties where a stable reference is required. The weight and material composition support steady contact with measuring instruments and clamping devices, aiding straight-forward use with calipers and height gauges. Manufactured by Vertex, the component integrates into quality-control and set-up routines, offering a dependable solution for engineers, toolroom staff and maintenance technicians seeking robust, easy-to-use fixturing without excessive bulk. Discuss supply and configuration of the V-5V V-block with Metav Werkzeuge — our precision specialists in Emmerich can advise on workshop integration and logistical details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: V-5V GTIN: 4061905087974 Manufacturer: Vertex Facts Dimensions: 51.5 x 130 x 79.5 mm Weight: 4.3 kg Accuracy: 0.05 ECLASS: 21160304 Special features Material: fine-grained cast iron Type: V-block / prism block Images: product gallery available FAQ What applications suit this vee block best? The V-5V vee block is intended for supporting cylindrical workpieces during inspection, marking and light machining tasks where stable, repeatable seating is required. How does the material affect performance? The fine-grained cast iron construction of the V-5V provides good vibration damping and thermal stability, contributing to steadier measurements and improved repeatability. Is the V-5V heavy enough for bench work without additional fixturing? With a mass of 4.3 kg, the V-5V offers sufficient ballast for many bench applications, reducing the need for secondary clamping during routine inspection tasks. What does the stated accuracy mean in practice? The declared accuracy value of 0.05 indicates the manufacturing tolerance and expected positional consistency of the vee surfaces, which supports reliable alignment in typical workshop and inspection scenarios. Who manufactures the product and how can it be identified? The vee block is produced by Vertex and is sold as SKU V-5V, GTIN 4061905087974; Vertex is the listed manufacturer for specification and traceability purposes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
518mm Pull Rod 7/16-20UNF Thread, 0.5kg – Vertex
Take advantage of reliable tool retention and simple handling thanks to the combination of a 7/16-20UNF threaded connection and a 518 mm shaft that ensures deep engagement, while the lightweight construction (0.5 kg) simplifies workshop handling — order the drawbar directly via Metav Werkzeuge or ask our consultants for application advice. VDR-R8-S drawbar — 518 mm shaft, 7/16-20UNF threaded connection (Vertex) The VDR-R8-S is a drawbar designed for R8 toolholders, providing robust tool retention for machining tasks where secure clamping and straightforward integration are required Precision drawbar for R8 spindles 7/16-20UNF threaded connection 518 mm shaft for deep engagement Lightweight at 0.5 kg for easy handling Consistent clamping for dependable machining results The engineered connection uses a 7/16-20UNF thread to deliver repeatable axial retention, reducing play between toolholder and spindle and helping to maintain concentricity during operation. With a shaft length of 518 mm, the component enables secure seating for extended toolholders or applications requiring deeper drawbar reach. This mechanical reliability supports stable cutting conditions and consistent part quality, improving process predictability in series production or precision one-off runs. Practical handling that speeds up workshop workflows Weighing just 0.5 kg, the component combines secure function with ease of handling, making tool changes less strenuous for operators and shortening changeover times on the shop floor. The compact mass contributes to reduced setup fatigue and quicker alignment when installing tooling, which in turn helps maintain throughput. Clear thread specification and standardised interface simplify inventory management and ensure compatibility with established R8 tooling systems. Supply and quality assurance through Metav Werkzeuge Sourcing via Metav Werkzeuge links the component to a European supply chain governed by a strict quality filter in Emmerich. Metav's decades of precision expertise and broad product range support procurement efficiency and continuity of supply for workshops and industry alike. Trust indicators such as a substantial customer base and a centralised stock for precision equipment minimise the risk of delivery gaps and support long-term operational planning. For secure R8 tool retention and easy workshop integration, request the VDR-R8-S from Metav Werkzeuge — consultants in Emmerich can advise on fitment, stock availability and delivery Technical Data Article number: VDR-R8-S GTIN: 4061905084058 eClass: 23309104 Facts Length: 518 mm Weight: 0.5 kg Thread: 7/16-20UNF Special features Type: Drawbar Brand: Vertex SKU: VDR-R8-S FAQ What spindle systems is this drawbar compatible with? The VDR-R8-S is designed for R8 toolholder systems and uses a 7/16-20UNF threaded connection for direct retention in compatible setups. How does the 518 mm shaft benefit deep-reach applications? A 518 mm shaft allows deeper engagement of the drawbar into extended toolholders, improving axial retention for long tooling and reducing the risk of pull-out during operation. Is the drawbar heavy to handle during tool changes? At 0.5 kg the drawbar offers lightweight handling, which reduces operator fatigue and speeds up manual tool changes without compromising on clamping performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
51mm Horizontal Clamp Low Base Self-Adjusting Foot Zinc-Plated, 2500N Closing Force / 3200N Holding Force - Kukamet
Take advantage of the combination of a galvanised finish, a self-adjusting low foot and proven clamping figures for consistent, time-saving workholding. Order the clamp directly via Metav Werkzeuge or consult the technical team for application advice. Horizontal clamp 551-3 – Galvanised horizontal toggle clamp with low, self-adjusting foot (Kukamet) A Horizontal clamp 551-3 designed for secure temporary workpiece holding in welding, assembly and fixture applications, featuring a low-profile foot for tight setups. Galvanised finish for corrosion resistance Self-adjusting low foot for uneven workpieces Clamping force 2,500 N Holding force 3,200 N Secure clamping for repeatable fixtures The 551-3 delivers quantifiable performance: a clamping force of 2,500 N combined with a holding force of 3,200 N ensures repeatable results in series production and jigs. These figures translate into reliable retention during machining or assembly, reducing rework and downtimes. The toggle mechanism converts lever travel into stable pressure, providing efficient, mechanical advantage without complex adjustments. Compact, low-profile design for tight setups A low-profile foot and compact footprint allow the clamp to be mounted where space is limited. With a width of 55.5 mm, a height of 51 mm and a mass of 0.53 kg, the unit fits into confined fixtures and on thin fixture plates while keeping overall weight low. The reduced clearance requirement simplifies fixture layout and enables closer part spacing, supporting higher throughput in constrained work envelopes. Durable finish and automatic alignment for long service life The galvanised surface protects against corrosion in workshop and light industrial environments, extending service intervals and preserving appearance. The self-adjusting foot compensates for slight part variation or uneven clamping surfaces, ensuring full-face contact and even force distribution. Together, these features reduce maintenance needs and help maintain consistent clamping behaviour over prolonged use. Easy integration into existing fixture systems As a horizontal toggle clamp with a lever-actuated design, the unit integrates smoothly into assembly rigs, welding jigs and manufacturing fixtures. The simple mounting geometry and standard dimensions permit quick replacement or addition to existing setups, while the robust construction supports repetitive cycles in production. Where predictable mechanical clamping is required, this solution offers a pragmatic balance of reliability and compactness. Choose Kukamet quality for dependable clamping—contact Metav Werkzeuge for stock information and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 551-3 GTIN: 8680731502855 ECLASS: 21041719 ETIM: EC011973 Facts Width: 55.5 mm Height: 51 mm Weight: 0.53 kg Clamping force (max): 2,500 N Holding force (max): 3,200 N Special features Galvanised finish Self-adjusting low foot Horizontal toggle clamp design Category: Spanner FAQ What clamping and holding forces does this clamp provide? The clamp provides a clamping force of 2,500 N and a holding force of 3,200 N for secure temporary workpiece retention. Is the foot adjustable for uneven surfaces? Yes, the unit features a self-adjusting low foot that compensates for minor surface irregularities to ensure even contact. What environments is the clamp suited for? With a galvanised finish, the clamp is suitable for workshop and light industrial environments where corrosion resistance is required. Can the clamp be integrated into existing fixtures? The horizontal toggle design and compact dimensions allow straightforward integration into assembly, welding and fixture systems. Which manufacturer produces this clamp and what is the SKU? The clamp is produced by Kukamet and listed under SKU 551-3. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
51mm Supra Heavy Duty Keyless Drill Chuck 3-16mm B18 Right-Hand - RÖHM
Take advantage of the combination of robust self-tightening clamping, a 3–16 mm clamping range, and a B18 taper for reliable integration into stationary machines; order directly via Metav Werkzeuge or consult our specialists for application advice. RÖHM Supra heavy-duty keyless drill chuck — 3–16 mm, B18, right-hand rotation The RÖHM Supra keyless drill chuck is a heavy industrial design for stationary machines, offering a 3–16 mm clamping range with a B18 taper for right-hand rotation. Self-tightening heavy-duty design 3–16 mm clamping range for versatility B18 taper for secure machine integration Designed for right-hand rotation Robust clamping for demanding production The chuck's self-tightening mechanism ensures that torque increases the grip on the tool, reducing slipping under load and improving safety in continuous production. With a 3–16 mm clamping range, the unit accommodates a wide spread of twist drills and small toolholders, lowering tool-change frequency and simplifying inventory. The heavy industrial construction is tailored to stationary applications, translating into reduced downtime and a steadier production flow when machining repetitive holes. Secure fit and machine compatibility for consistent results Fitted with a B18 taper, the chuck integrates with machines that accept this standard shank size, creating a compact, concentric connection that helps maintain low runout. Specified for right-hand rotation, the design matches the majority of conventional drill spindles, ensuring predictable torque direction and chip evacuation. The modest 51 mm outer diameter makes installation straightforward in many bench and pillar drills, while the overall geometry supports accurate concentricity for improved hole quality. Built for continuous operation and straightforward upkeep The heavy-duty construction of this quick-change chuck focuses on longevity and low-maintenance use in workshop and industrial environments. The keyless, self-tightening operation reduces dependency on external keys or tools, accelerating changeovers and simplifying routine handling. Where service is required, the compact design allows for quick inspection and replacement as a single unit, keeping maintenance intervals short and predictable for production planners. For dependable heavy-duty clamping choose the RÖHM Supra — order via Metav Werkzeuge for fast supply from Emmerich and consult our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for application-specific guidance Technical data Article number: 4000832062NW Label: Schnellspannbohrfutter Supra Spann-D.3-16mm B 18 f.Re.-Lauf RÖHM Manufacturer: RÖHM Product type: Quick-change drill chuck Packaging unit: 1 Facts Clamping range: 3–16 mm Outer diameter: 51 mm Shank / taper: B18 Rotation direction: Right-hand (for right-hand rotation) Design: Heavy industrial version Special features Self-tightening operation Suitable for stationary machines Quick-change / keyless style chuck Type: Supra FAQ What clamping range does the chuck support? The chuck supports a 3–16 mm clamping range, allowing use with a broad selection of twist drills and small toolholders. Is the chuck suitable for bench and pillar drills? Yes. The B18 taper and compact 51 mm outer diameter make it appropriate for many bench and pillar drill spindles designed for B18 shanks. Does the chuck require a key to tighten? No. The Supra is a quick-change, self-tightening design that increases grip under torque without an external key. Can the chuck be used in continuous industrial applications? The heavy industrial construction of the Supra is designed for continuous operation in stationary machines, offering durability and reduced downtime. What direction of rotation is supported by this chuck? This model is intended for right-hand rotation, matching the standard spindle direction of most drilling machines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52-62mm Clamping V-Block With Flat Support And Magnetic Base, Load 100 N - AMF
Take advantage of the adjustable height and magnetic base to secure small workpieces quickly while maintaining precise set-ups; the compact diameters and reliable max. load capacity of 100 kg ensure stable support across assembly and inspection tasks. Order directly via Metav Werkzeuge or request tailored advice from the consultants. AMF Screw Support No. 6400M - 62 — adjustable support with magnetic base, 52–62 mm The AMF Screw Support No. 6400M - 62 is an adjustable screw support with a flat contact surface and an integrated magnetic base, designed for secure positioning and support of components in machining, assembly and inspection applications. Adjustable height 52–62 mm Magnetic base for firm hold Max. load capacity 100 kg Thread 30 x 4 for fine adjustment Stable support for machining and inspection The component delivers a secure positioning solution where repeatable support is required. The combination of a flat contact surface and an integrated magnetic base allows the support to be fixed on ferrous machine tables or fixtures, so setups remain stable during measurement or light machining tasks. This reduces clamping time and minimises rework, supporting a more efficient workflow in the workshop. Fine, reliable adjustment for consistent set-ups A thread 30 x 4 provides controlled, incremental height changes across the adjustable height range of 52–62 mm, enabling precise alignment with jigs and tooling. Because the adjustment mechanism is coarse enough for quick rough setting yet fine enough for accurate levelling, the support is suitable for repeatable processes where consistent vertical position is essential. The measured approach to adjustment improves process reliability. Compact footprint with practical load capacity The support features compact diameters (top and base around 50–55 mm) and a max. load capacity of 100 kg, making it a space-efficient solution for benches, fixtures and small machines. The small footprint allows multiple supports to be used in close proximity, while the rated capacity is sufficient for many component-holding and assembly tasks. This balance of size and strength helps maintain a tidy workstation without sacrificing stability. Designed for workshop durability and quick deployment Constructed for everyday shop use, the support is finished for practical handling and quick placement. The flat support is suited to a variety of workpiece profiles, while the magnetic base facilitates rapid repositioning without the need for additional clamps. For operations that demand frequent changeovers, this setup reduces downtime and streamlines setup procedures, contributing to increased productivity. Contact Metav Werkzeuge for specific delivery options or to discuss how the AMF Screw Support No. 6400M - 62 can be integrated into existing clamping setups Technical data Article number / SKU: 4000833475NW Type: Nr. 6400M - 62 Item name: Schraubbock Nr.6400M Gr.62 m.flacher Auflage u.Magnetfuß H.52-62mm AMF Product type: screw support Manufacturer: AMF Packaging unit: 1 Internal ID: 4000833475NW Dimensions & performance Max. load capacity: 100 kg Thread: 30 x 4 Height minimum: 52 mm Height maximum: 62 mm D1: 50 mm D2: 50 mm D3: 55 mm Features Flat support surface Magnetic base for fixing to ferrous surfaces Fine-thread adjustment Compact top and base diameters FAQ What surfaces is the magnetic base suitable for? The magnetic base is designed to hold the AMF Screw Support No. 6400M - 62 firmly on ferrous machine tables and steel fixtures, enabling stable support during assembly and inspection. How precise is the height adjustment? Height is adjusted by a 30 x 4 thread on the AMF screw support, which permits controlled changes across the 52–62 mm range for repeatable set-ups. What load can the support carry? The support has a stated maximum load capacity of 100 kg, which is suitable for many small assembly and inspection tasks where compact supports are required. Can multiple supports be used together for larger components? Yes, the compact diameters and flat contact surfaces of the AMF Screw Support No. 6400M - 62 allow several units to be positioned close together to distribute load and support larger workpieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52-Piece 3/4"-10 Thread Clamping Kit Without Plastic Case, T-Slot 7/8" - Vertex
Take advantage of a complete, versatile workholding solution that combines modular components, robust build and no plastic packaging for cleaner storage and lower environmental impact — order directly via Metav Werkzeuge or consult our product specialists for tailored advice. Vertex CK-206 Clamping Tool Set — 52-piece, T-nut 7/8" and bolt kit The Clamping Tool Set CK-206 is a modular fixture kit designed for machine-table clamping and flexible workshop fixturing across a wide range of machining tasks Complete 52-piece clamping kit Includes 24 bolts and modular T-nuts Supplied without plastic container Faster, more precise fixturing for everyday machining The Clamping Tool Set CK-206 brings together a balanced selection of components to reduce setup time and improve positional accuracy. The kit contains bolts, T-nuts, flanges and locating blocks arranged for straightforward assembly into machine-table T-slots. The included bolt specification (3/4"-10w) and T-nut 7/8" compatibility ensure predictable clamping force and repeatable locating, which supports consistent machining tolerances and fewer reworks. For workshops that value measurable efficiency, the modular layout simplifies fixture changes and supports quick adaptation to different workpiece sizes. Robust composition for organised, long-term use Weighing 26.5 kg, the set is substantial and intended for frequent handling in professional environments. The components are presented for rapid selection and stable clamping rather than temporary storage solutions; notably the set is supplied without plastic container, reflecting a lower-waste approach and easier integration into existing workshop storage systems. The combination of flanges, couplings and clamps reduces the need for improvised fixtures, helping to protect machined surfaces while maintaining a tidy bench or machine table. Practical gains: quicker setups and consistent results By including multiple sizes of bolts and a matched complement of blocks and clamps, the kit supports versatile workholding strategies from simple single-point clamping to multi-point fixture assemblies. This modularity delivers a quick setup advantage, cutting down non-productive time and increasing machine uptime. The components are suitable for routine fixturing on slotted tables and are intended for use by machinists, toolroom staff and maintenance teams who require dependable repeatability and straightforward assembly logic rather than bespoke bespoke fixtures. For technical advice or to arrange supply from Metav Werkzeuge — the precision partner in Emmerich with a broad stock and decades of experience — contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specific compatibility guidance and delivery options. Technical Data Article number: CK-206 GTIN: 4061905090202 Manufacturer: Vertex Data Pieces per set: 52 Weight: 26.5 kg T-nut size: 7/8" Special features 24 bolts (4 per size: 3/4", 5", 6", 7", 8" or 75, 100, 125, 150, 175, 200 mm) Bolt thread: 3/4"-10w 6 T-nuts 4 couplings 6 flanges 6 clamps 6 blocks Supplied without plastic container FAQ What is included in the set and how is it organised? The set contains 52 pieces: 24 bolts (4 per size), 6 T-nuts, 4 couplings, 6 flanges, 6 clamps and 6 blocks; the layout is intended for modular assembly on slotted machine tables. Which T-slot size does the kit fit? The kit is compatible with 7/8" T-slots, matching the included T-nuts for secure clamping on many milling and machining tables. Are the bolts supplied in imperial or metric sizes? The kit lists both common designations: bolt variants are given as 3/4", 5", 6", 7", 8" and alternatively as 75, 100, 125, 150, 175, 200 mm for straightforward selection during fixture planning. Is the set contained in a plastic box? No; the set is supplied without plastic container, which reduces packaging waste and allows integration into existing storage systems or dedicated steel cabinets. Who benefits most from this clamping kit? Machine shops, toolrooms and maintenance departments will find the kit useful for its modularity and repeatability when setting up fixtures on slotted tables; it is suited to routine production and prototyping environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit 3/4–8" & 75–200mm Bolts, T-Slot 5/8", Couplings, Flanges, Clamps, Blocks - Vertex
Take advantage of a versatile clamping kit that combines broad thread compatibility and T-slot readiness for reliable fixturing. The set’s mix of imperial and metric bolt lengths plus standard T-slot fittings supports rapid machine set-up and repeatable results. Order the kit directly via Metav Werkzeuge or ask our consultants if needed. CK-104B — 52-piece Vertex clamping kit with 1/2" thread options and 5/8" T-slot compatibility The CK-104B is a comprehensive clamping kit for machining and workshop fixturing, supplying standard-thread bolts, T-slot fittings and clamping hardware for versatile fixture building Comprehensive clamping components Compatible with 5/8" T-slots 1/2" 12W and 1/2" 13UNC bolt threads Portable kit weight 10.4 kg Efficient fixturing across imperial and metric systems This clamping set is designed for practical workshop use and offers versatile compatibility with both imperial-threaded equipment and common T-slot tables. The presence of 1/2" 12W and 1/2" 13UNC bolt threads ensures secure engagement with fixtures that use standard imperial fastening, reducing the need for bespoke adapters. Explaining the technical detail: UNC is a common coarse thread form used in many jigs and fixtures, while the 12W designation indicates a standard half-inch thread pitch compatible with many clamping applications. The result is a reliable fastening basis that shortens set-up time and improves repeatability in production and toolroom environments. Ready-to-use components that speed setup and changeovers The kit contains a comprehensive selection of T-slot and clamping elements plus bolts in both imperial and metric lengths, enabling flexible placement and secure workholding. Having a balanced spread of T-slot fittings, couplings, flanges, clamps and blocks simplifies the layout of fixtures and reduces downtime during job changes. For workshops where quick repositioning and repeatable clamping are critical, the organised component mix supports fast assembly of bespoke fixtures without the need to source additional parts, improving throughput and uptime. Practical design for workshop handling and transport Weighing 10.4 kg, the fixture set is compact enough to be transported between benches yet substantial enough to indicate robust content. A single, organised kit reduces on-bench clutter and centralises essential fixturing hardware, which helps maintain a tidy workflow and faster job preparation. Where multiple machines or rapid changeovers are involved, a portable set that contains the most commonly required fittings and bolt thread types helps standardise procedures and supports consistent machining results. Trust and support from a precision partner Sourcing the kit through Metav Werkzeuge combines the product’s practical features with a dependable supply chain and technical advice. Metav’s role as a quality filter for the European market brings tested product selection and decades of industry experience to workshops and industry buyers. For operations seeking both functional hardware and reliable procurement, the supplier connection ensures consistent availability and informed guidance for specifying the right components for each fixturing task. For solutions tailored to machining needs, contact Metav Werkzeuge for procurement and technical advice on Vertex clamping kits and compatible fixtures — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance. Technical Data Article number: CK-104B GTIN: 4061905088766 ECLASS: 21041790 Manufacturer: Vertex Facts Weight: 10.4 kg T-slot size: 5/8" Pieces per set: 52 SKU: CK-104B Special features Bolt thread types: 1/2"‑12W and 1/2"‑13UNC Contents: bolts in imperial and metric lengths, T-nuts, couplings, flanges, clamps, blocks Suitable for general machining fixturing and T-slot tables Brand: Vertex FAQ What thread standards are included in the set? The kit includes bolts with 1/2"‑12W and 1/2"‑13UNC threads to ensure compatibility with standard imperial fixturing and many clamping applications using those thread forms. Which T-slot size does the clamping kit fit? The components are intended for 5/8" T-slot tables and fixtures, providing a direct fit for machines and tooling that use this common slot width. What components are supplied with the CK-104B set? The CK-104B clamping kit contains a mix of bolts in imperial and metric lengths, T-nuts, couplings, flanges, clamps and blocks to assemble versatile fixtures quickly. Is the set suitable for rapid changeovers between jobs? Yes, the organised selection of fittings and bolt types in the set supports fast reconfiguration and repeatable clamping, reducing set-up time during job changes. Can Vertex clamping hardware be integrated with existing fixturing systems? Vertex components in this kit are designed for straightforward integration with standard T-slot tables and commonly used thread forms, allowing easy combination with existing fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit 3/8"-16 Bolts, T-Slot 1/2", Includes Bolts/Nuts/Clamps/Flanges - Vertex
Take advantage of a compact, ready-to-use clamping solution that combines wide range of bolt lengths, universal T-slot compatibility and organised component assortment to speed up setup times and improve repeatability on the shop floor. Order the CK-103B clamping kit directly via Metav Werkzeuge or consult Metav's specialists for application advice. Vertex CK-103B Clamping Kit — 52-piece set with 3/8"-16 threaded bolts A CK-103B clamping kit engineered for secure fixturing on T-slot tables, offering a versatile assortment for machining and workshop clamping tasks. Comprehensive 52-piece clamping kit Universal 3/8"-16 threaded bolts Compatible with 1/2" T-slots Robust 6.5 kg organised set Faster setup, consistent throughput with precision fixturing The set is designed to reduce setup time and increase repeatability by providing a matched assortment of fastening and locating elements. With a range of bolt lengths and a standard 3/8"-16 thread format, the kit aligns with common fixturing practices on milling machines and drilling tables. This structured approach translates into fewer tool changes and predictable clamping behaviour, supporting higher machine utilisation and more efficient production cycles. The combination of a comprehensive assortment and clear organisation helps move jobs from setup to cut with minimal delay. Durable, compact kit for daily workshop use Arranged as a single, transportable set with a total mass of 6.5 kg, the components are sized for everyday handling and storage without excessive bulk. The included bolts, couplings, flanges and clamps are provided for a broad range of workpiece heights and fixture configurations, enabling reliable pressure distribution and stable holding during machining operations. The set's physical balance and component selection support safer clamping and faster changeovers, which contributes to consistent surface finishes and predictable tolerances in serial and one-off work alike. Broad applicability and supplier transparency for production planning The assortment covers common clamping needs across milling, drilling and general workshop fixturing, with thread and T-slot compatibility that facilitates integration into existing workholding systems. For procurement and planning, the kit offers a predictable scope of delivery and a clear SKU for inventory control. Metav's position as a European supply partner emphasises accessible precision: centralised stock in Emmerich, an extensive product portfolio and decades of specialist experience ensure reliable availability and support for industrial customers and trade partners. Choose the Vertex CK-103B for a practical boost in clamping efficiency; contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: CK-103B GTIN: 4061905087752 Manufacturer: Vertex Facts Weight: 6.5 kg Pieces per set: 52 Bolt thread: 3/8"-16w T-slot size: 1/2" Special features Contents: 24 bolts (4 per size: 3/4/5/6/7/8" or 75/100/125/150/175/200 mm), 6 T-slots, 4 couplings, 6 flanges, 6 clamps, 6 blocks SKU: CK-103B Eclass: 21041790 FAQ What is included in the clamping set? The CK-103B clamping kit contains 52 parts: a range of bolts in multiple lengths, T-slot fittings, couplings, flanges, clamps and blocks for flexible fixturing. Which table slots is the kit compatible with? Components are designed for use with 1/2" T-slots, matching standard machine-table configurations for secure fixturing. Is the thread format industry standard? Yes, the kit uses 3/8"-16 threaded bolts, a common thread size for workshop clamping and fixture assemblies. How does this set support repeatable setups? By providing matched lengths and fixings in one organised set, the kit reduces variation in clamping positions and shortens setup time, improving process repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit M10-1.5P, 12mm T-Slot Bolts, Clamps, Flanges, Couplings - Vertex
Take advantage of a modular clamping system that combines secure M10 fixation with T-slot compatibility for faster set-up and reliable repeatability; order the set directly via Metav Werkzeuge or request tailored advice from our consultants. Clamping Tool Set CK-10 — 52-piece set, T-slot 12 mm, Vertex The Clamping Tool Set CK-10 is a versatile fixture kit for workshop and light industrial T‑slot tables, designed to secure small to medium workpieces during machining and assembly. Comprehensive clamping component range Compatible with 12 mm T-slots M10 threaded bolts for secure fixation Set weight approx. 7.6 kg for stable handling Faster set-up and consistent repeatability for production A modular assortment of clamping parts enables quick configuration changes on machine tables. The combination of T-slot 12 mm compatibility and M10 thread fixation provides defined contact points and consistent clamping force, which reduces setup time and minimises rework. This results in a measurable increase in throughput for small-batch production runs and repair work. Where repeatable positioning matters, the fixture kit supports reliable reference points and stable orientation across multiple pieces. Flexible components that adapt to varied fixturing tasks The kit contains a range of bolts, T-nuts, couplings, flanges, clamps and clamping blocks that permit multiple clamping strategies without the need for custom parts. T-nuts slide into the table profile and secure components with low-profile bolts, while flanges and couplings allow modular stacking and offsetting of clamps. Explaining the function: a coupling joins two elements to extend reach; a flange distributes load to prevent component tilt. The assortment is therefore suitable for diverse holding tasks in general workshop use. Workshop-grade organisation and dependable sourcing Packaged as a complete set, the fixture kit supports streamlined inventory and reduces the need for repeated small orders. Supplied by Vertex and distributed via Metav Werkzeuge, the assortment benefits from established supply channels and quality checks that help avoid inconsistent batches. Metav’s positioning as a precision partner means the kit is part of a wider range that simplifies procurement and supports long-term workshop planning, combining practical logistics with reliable product performance. Contact Metav Werkzeuge for specification support on the Vertex clamping tool set CK-10 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CK-10 GTIN: 4061905090905 eClass: 21041790 Facts Pieces per set: 52 T-slot width: 12 mm Bolt thread: M10-1,5P Weight: 7.6 kg Special features Contents: bolts, T-nuts, couplings, flanges, clamps, blocks Suitable for T-slot table fixturing Compact workshop assortment FAQ What machines is this clamping kit suitable for? The CK-10 clamping tool set from Vertex is suitable for machine tables with a 12 mm T-slot, and for any setup requiring M10 fixation and modular fixturing. Does the set include T-nuts and bolts for immediate use? Yes, the Vertex clamping tool set contains T-nuts and M10 bolts along with flanges and clamps, allowing immediate assembly on compatible T-slot tables. Can the components be combined for offset clamping? Components such as couplings and flanges in the CK-10 set are intended to be combined for offset and stacked clamping configurations. Is the set appropriate for small-batch production and prototyping? The fixture kit is designed for flexible workshop use and supports quick reconfiguration, making it well suited to prototyping and small-batch production runs. Which brand and SKU should be referenced when ordering replacement parts? Reference Vertex and the SKU CK-10 when ordering individual replacement components or additional sets. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit M12 Bolts 75–200mm, 14mm T-Slot, Includes Couplings Flanges Clamps Blocks - Vertex
Benefit from a robust 52-piece clamping kit with M12 x 1.75 bolts and 14 mm T-slot compatibility to reduce setup time and ensure repeatable workholding. The practical combination of modular components and compact total weight streamlines fixture tasks in small and midsize workshops. Order the CK-12A clamping kit directly via Metav Werkzeuge or ask our consultants if needed. CK-12A Clamping Kit by Vertex — 52-piece set with M12 x 1.75 bolts and 14 mm T-slot compatibility A versatile CK-12A clamping kit designed for modular fixturing and secure workholding on T-slot tables in milling and machining environments. 52-piece clamping set for versatile workholding M12 x 1.75 bolts for standardised fixture threads Compatible with 14 mm T-slot tables Complete kit, total weight 9.4 kg Secure, repeatable workholding for everyday machining The set centres on a metric M12 x 1.75 bolt standard, which provides predictable thread engagement and straightforward interchangeability with typical clamping hardware. This characteristic supports consistent clamping force across repeated setups, reducing rework and improving machining tolerance adherence. For routine fixture tasks where repeatability is measured in micrometres rather than minutes, the kit contributes directly to process reliability and throughput. Modular components that speed up setup and adaptation Contents include a balanced mix of fastening and locating elements: a broad range of bolt lengths, T-nuts, couplings, flanges, clamps and blocks, enabling one-step adaptation from simple single-part clamping to more complex multi‑part fixtures. The availability of multiple bolt lengths—offered in both imperial and metric sizes—allows flexible positioning within the table slots, so changeovers are faster and less error-prone. This modular approach keeps fixturing versatile without the need for bespoke components. Compact logistics with clear identification for procurement The complete kit has a manageable total weight of 9.4 kg, which simplifies storage and internal handling between workshop stations. Identification via SKU CK-12A and GTIN ensures compatibility with procurement systems and warehouse workflows. The compact form and clear itemisation of components support inventory control, making it easier to keep replacement parts on hand and to plan preventive maintenance of clamping hardware. Practical application cases and measurable benefits Intended for general-purpose milling and machining applications, the kit supports standard T-slot tables and is suitable where stable, adjustable clamping is required. By consolidating common fixturing parts into a single set, the solution reduces the number of supplier orders and shortens machine downtime during changeovers. The practical outcome is a measurable gain in operational efficiency and fewer interruptions to production planning. For expert advice on integrating Vertex fixturing solutions into existing workflows, contact Metav Werkzeuge in Emmerich for tailored procurement support and reliable supply. Technical Data Article number: CK-12A GTIN: 4061905093616 Brand: Vertex Facts Weight: 9.4 kg Pieces per set: 52 T-slot compatibility: 14 mm Bolt thread: M12 x 1.75 eCl@ss: 21041790 Special features Content: 24 bolts (4 per size: 3", 4", 5", 6", 7", 8" / 75, 100, 125, 150, 175, 200 mm) Includes T-nuts, couplings, flanges, clamps, blocks Set configuration for modular fixturing FAQ What is included in the clamping kit? The CK-12A clamping kit by Vertex contains bolts in multiple lengths, T-nuts, couplings, flanges, clamps and locating blocks organised as a comprehensive 52-piece set. Which T-slot size does the kit fit? The set is designed for 14 mm T-slot tables and includes compatible T-nuts to secure the clamping elements in standard machine table slots. What thread specification do the bolts use? Bolts supplied with the CK-12A use an M12 x 1.75 metric thread, a common fixture standard that ensures interchangeability and reliable engagement. Is this kit suitable for multi‑part fixturing on milling machines? Yes, the modular mix of bolts, flanges and clamps in the CK-12A supports single-part and multi-part fixturing workflows typical in milling and machining centres. How is the product identified for ordering and inventory? The set is listed under SKU CK-12A with GTIN 4061905093616, and is supplied by Vertex for consistent procurement and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit M12 Bolts 75–200mm, 15.7mm T-Slot Compatible - Vertex
Take advantage of a compact 52-piece modular kit, M12 × 1.75 threaded bolts and 15.7 mm T-slot compatibility to speed clamping set-up, reduce fixture variants and keep production running. Order the CK-12B clamping tool set directly via Metav Werkzeuge or ask our consultants if needed. CK-12B clamping tool set — 52-piece modular fixture kit with M12 bolts and 15.7 mm T-slot compatibility, Vertex CK-12B clamping tool set — a modular fixturing solution for machine shops and production cells, designed to work with standard 15.7 mm T-slots 52-piece modular clamping set Includes M12 × 1.75 bolts Fits 15.7 mm T-slots Comprehensive clamps, flanges and blocks Faster set-up and fewer tool changes for higher throughput The CK-12B delivers a measurable reduction in set-up time through a consistent modular design. The combination of standardised M12 × 1.75 threaded bolts and an assortment of clamps and blocks allows fixtures to be assembled and reconfigured quickly, so machine downtime is minimised. For workshops that run mixed batches, the result is a smoother workflow and fewer specialist fixtures to manage, translating into faster part turnaround and improved machine utilisation. Reliable clamping that adapts to common machine tables Compatibility with 15.7 mm T-slot tables ensures the kit integrates with a wide range of milling machines and machining centres. The included components — bolts, T-nuts, flanges, couplings, clamps and blocks — form a versatile set that supports conventional clamping tasks and repeatable workholding. Clear component variety reduces guesswork during planning and makes it easier to achieve secure, accurate clamping across diverse workpieces. Robust, workshop-ready components for everyday use As a compact workshop kit, the set’s composition focuses on longevity and practical handling. The assortment covers common clamping needs, reducing the need for ad‑hoc improvised fixtures that risk inaccuracy. The case weight of 9.5 kg reflects a substantial package that stays organised on the bench and withstands frequent handling. Modular parts are designed for straightforward replacement and inventory control in production environments. Simplified inventory and dependable supply from a specialist partner Adopting a single modular clamping range streamlines stock keeping and reduces vendor fragmentation. Sourcing the set from an established partner offers added assurance: Metav’s experience in precision tools supports reliable supply and consistent quality, so purchasing decisions become operational improvements rather than logistical headaches. For procurement teams, the kit represents a pragmatic step towards centralised, predictable tool provisioning. For tailored advice on the Vertex CK-12B clamping tool set and fast fulfilment from Metav Werkzeuge in Emmerich, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CK-12B GTIN: 4061905093272 eClass: 21041790 Facts Pieces per set: 52 Weight: 9.5 kg T-slot compatibility: 15.7 mm Bolt thread: M12 × 1.75 pitch Special features 24 bolts (4 of each size: 75 / 100 / 125 / 150 / 175 / 200 mm) 6 T-nuts 4 couplings 6 flanges 6 clamps 6 blocks FAQ What machines is this clamping kit compatible with? The clamping kit is designed for machines with 15.7 mm T-slots and suits a wide range of milling machines and machining centres; the modular parts allow adaptation to different tables and setups. How many pieces are included and what are the bolt sizes? The set contains 52 pieces; it includes 24 bolts in six lengths (75, 100, 125, 150, 175, 200 mm) supplied as four bolts per length, together with T-nuts, couplings, flanges, clamps and blocks. Is the thread specification suitable for standard clamping hardware? Yes, the included bolts use an M12 × 1.75 thread, matching common clamping hardware standards used in production environments. Can the set be used for repeatable, precision fixturing? The modular parts are intended to provide consistent clamping positions and repeatability for routine machining tasks; repeatability is supported by the standardised bolt and T-nut interface. Who manufactures the set and what is the SKU? The kit is manufactured by Vertex and sold under SKU CK-12B, a Vertex clamping tool set designed for workshop and production use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit M18 Bolts 20mm T-Slot Without Plastic Case, Set - Vertex
Take advantage of the combination of stable fixturing, flexible T‑slot compatibility and a fully equipped component set for faster set‑ups and repeatable results. The use of M18 x 2.5P bolts together with 20 mm T‑nut compatibility reduces machine downtime and simplifies installation. Order the (CK-18 Clamping Tool Set) directly via (Metav Werkzeuge) or ask our consultants if needed. CK-18 Clamping Tool Set by Vertex — M18 x 2.5P bolts, 20 mm T‑slot compatibility CK-18 Clamping Tool Set for versatile workshop and machine table fixturing, designed to deliver stable workholding across a wide range of setups. Complete workshop clamping kit M18 x 2.5P precision bolts 20 mm compatible T-nuts Supplied without plastic container Stable fixturing for repeatable machining The CK-18 Clamping Tool Set delivers a reliable basis for precision fixturing by combining standard M18 thread bolts with compatible T‑slot hardware. The presence of M18 x 2.5P bolts and 20 mm T‑nut compatibility means that clamping elements locate securely in most common machine tables, reducing movement during cutting and milling operations. For production processes this translates into fewer re‑set cycles and improved part consistency, supporting an efficient, predictable workflow. Flexible configuration to speed up set‑ups A full complement of bolts, T‑nuts, couplings, flanges, clamps and blocks enables rapid assembly of bespoke fixtures. Modular components allow the assembly of multiple clamping points and support elements without the need for specialised tooling; couplings and flanges permit secure junctions, while the selection of clamps and blocks provides clear workpiece support. This adaptability shortens set‑up time and allows a single kit to serve multiple jobs, making workshop logistics simpler and reducing the number of separate purchases required. Practical handling and environmental consideration The kit is supplied as a complete set and delivered without a plastic container, reflecting a lower packaging footprint while still providing robust, transportable hardware. At a packaged weight of 25.3 kg, the set is substantial enough to remain stable during handling yet compact enough to store on a workshop shelf. The arrangement of components promotes organised storage and fast access to the required items during tool changes, contributing to an orderly workplace and fewer interruptions in production. Contact Metav Werkzeuge today to discuss how the Vertex CK-18 clamping set with M18 x 2.5P bolts and 20 mm T‑slot compatibility can be integrated into existing fixturing strategies — Metav Werkzeuge provides tailored advice and rapid dispatch from Emmerich. Technical data SKU: CK-18 GTIN: 4061905094248 Manufacturer: Vertex Weight: 25.3 kg Set: 52 pieces eClass: 21041790 Core technical specifications T‑slot nominal width: 20 mm Bolt thread: M18 x 2.5P Pieces per set: 52 Packaged weight: 25.3 kg Features and contents 24 bolts (4 per size: 75 / 100 / 125 / 150 / 175 / 200 mm) 6 T‑nuts for 20 mm T‑slots 4 couplings 6 flanges 6 clamps 6 blocks Supplied without plastic container FAQ What components are included in the set? The CK-18 clamping tool set from Vertex contains bolts, T‑nuts, couplings, flanges, clamps and blocks as listed in the technical data, supplied as a complete workshop kit. Is the kit compatible with 20 mm T‑slot machine tables? Yes, the set includes T‑nuts specified for 20 mm T‑slots, making it suitable for standard tables that accept 20 mm slot hardware. Are the bolt threads standard? The bolts in the CK-18 kit use a standard M18 x 2.5P thread, compatible with commonly used clamping hardware and fixtures. Does the set come in a plastic case? No — the kit is supplied without a plastic container, which reduces packaging waste and simplifies disposal. Can the components be used to build customised fixtures? Yes, the combination of bolts, couplings, flanges, clamps and blocks is intended for modular fixture construction and flexible workshop setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit With 1/2"-12W & 1/2"-13UNC Bolts, T-Slot 9/16" - Vertex
High versatility and a comprehensive component range deliver reliable, repeatable fixturing for milling and general workshop applications; the 52-piece kit with multiple bolt sizes and T‑slot fittings speeds up set-up and minimises downtime. Order the kit directly via Metav Werkzeuge or ask the consultants for application advice. CK-104A Clamping Tool Set (52-piece) — Vertex, compatible with 9/16" T-slot CK-104A is a modular clamping set designed for workshop fixturing and machine table work, providing a compact toolkit for flexible, repeatable clamping on 9/16" T‑slot tables. *Versatile imperial bolt sizes included *Compatible with 9/16" T-slots *Complete clamping components for fixturing *Total weight 9.7 kg for easy handling Faster setups through modular fixturing The 52-piece kit is configured to reduce machining downtime by offering a coherent selection of fastening elements that cover common fixturing needs. With a set that contains multiple bolt lengths and a full complement of clamps, flanges and blocks, workshop teams benefit from repeatable clamping arrangements that are quicker to assemble than improvised fixtures. The modular nature of the kit enables standardised set-ups across different workpieces, which supports consistent cycle times and improved throughput on production and jobbing machines. Designed for compatibility and adaptability Components are specified for straightforward integration into existing machine tables: the set includes bolts with 1/2"-12w and 1/2"-13UNC threads and is matched to T-slot 9/16" widths, enabling use on equipment that accepts imperial fastenings. The assortment—bolts, T-nuts, clamps, flanges and blocks—permits a wide range of clamping geometries, from simple single‑piece holds to multi‑point fixtures for irregular parts. Clear thread and slot compatibility reduces the need for adapters and supports reliability in assembly and torque transfer during machining. Practical contents that support precision and organisation The kit’s contents are arranged to provide functional coverage for routine fixturing tasks: 24 bolts (four per size across the offered length range), six T‑nuts, four couplings, six flanges, six clamps and six blocks. This composition allows straightforward building of secure clamping solutions while keeping inventory small and manageable. At a total mass of 9.7 kg, the set is substantial yet portable, permitting storage on an equipment trolley or in a central workshop cabinet while remaining easy to move between machines when required. The balanced component mix helps maintain accuracy by ensuring that the correct clamp geometry is available without overcomplicating the setup process. Contact Metav Werkzeuge for tailored advice or order the Vertex CK-104A clamping kit through Metav Werkzeuge to streamline fixturing and shorten set-up times. Technical Data Article number: CK-104A GTIN: 4061905088315 Manufacturer: Vertex Facts Weight: 9.7 kg Pieces per set: 52 T-slot compatibility: 9/16" Special features Contents: 24 bolts (4 per size: 3/4/5/6/7/8" or 75/100/125/150/175/200 mm), 6 T-nuts, 4 couplings, 6 flanges, 6 clamps, 6 blocks Bolt threads: 1/2"-12w and 1/2"-13UNC eClass: 21041790 FAQ Is this set suitable for standard milling machine tables? The CK-104A clamping set by Vertex is compatible with machine tables that accept a 9/16" T-slot and is intended for standard milling and workshop fixturing tasks. Which thread types are provided with the bolts? Bolts in the kit feature 1/2"-12w and 1/2"-13UNC threads, allowing compatibility with equipment and accessories that use these imperial thread standards. What bolt lengths are included in the set? The set contains 24 bolts, supplied as four pieces of each length: 3", 4", 5", 6", 7", 8" (also listed as 75, 100, 125, 150, 175, 200 mm) to support a range of clamping heights. Does the kit include everything needed for basic fixturing? The CK-104A includes clamps, flanges, blocks, couplings and T‑nuts alongside the bolts, forming a complete baseline for common clamping configurations without the need for additional primary components. How portable and storable is the set? With a total weight of 9.7 kg, the clamping kit is designed for ease of handling and storage, suitable for transfer between machines or placement in a central workshop cabinet. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Kit With 5/8"-11 Bolts, T-Slot Accessories, Flanges And Clamps - Vertex
Take advantage of a robust 52-piece clamping kit with standard 5/8"-11 threaded bolts and 11/16" T-slot compatibility to speed up fixture setups and maintain consistent workpiece positioning. Order the set directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Vertex CK-105A Clamping Tool Set — 52-piece kit with 5/8"-11 bolts and 11/16" T-slot compatibility The Vertex CK-105A clamping tool set is a comprehensive workholding kit designed for secure T-slot fixturing in general machining and workshop applications. 52-piece professional workholding set 5/8"‑11 threaded bolts included Compatible with 11/16" T-slots Robust steel components, 12.5 kg total weight Faster set‑ups, higher throughput A well-structured clamping kit reduces downtime. The combination of standard 5/8"‑11 bolts and matching T-slot nuts allows rapid placement of clamps and supports, cutting fixture preparation time. This results in fewer interruptions on the shop floor and a measurable gain in daily throughput. The set’s modular composition simplifies repeat setups, delivering consistent positioning and reliable clamping force for batch production. Designed for reliable, repeatable clamping Precision in fixturing directly affects part quality. The kit’s mix of clamps, flanges and blocks ensures secure contact points and predictable clamping geometry, which improves machining repeatability. Where close tolerances are required, the stable clamp arrangement reduces vibration and workpiece movement, supporting both accuracy and tool life. Practical components for versatile applications Included items cover a wide range of fixturing needs: bolts in imperial and metric-corresponding lengths, T-slot hardware, couplings, flanges, clamps and blocks. These components allow quick adaptation to different workpiece sizes and job types without the need for custom tooling. The 52-piece composition makes the set suitable for small series, prototyping and maintenance tasks where flexible workholding is essential. Durable construction with workshop usability in mind Constructed from robust materials to withstand routine workshop use, the set offers long service life and reliable performance under clamping loads. The overall mass contributes to a feeling of durability while remaining portable enough to store with other tooling. Regular maintenance is straightforward: visual checks and basic cleaning keep the components functioning and reduce the risk of seizing or corrosion. Contact Metav Werkzeuge in Emmerich for technical advice or to order the Vertex CK-105A clamping tool set — email info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and delivery information Technical data Article number: CK-105A GTIN: 4061905089640 Classification (eClass): 21041790 Facts Total pieces: 52 Total weight: 12.5 kg Bolt thread: 5/8"‑11 Compatible T-slot size: 11/16" Special features Contents: 24 bolts (4 per size: 3", 4", 5", 6", 7", 8" — or 75, 100, 125, 150, 175, 200 mm), 6 T-slot nuts, 4 couplings, 6 flanges, 6 clamps, 6 blocks Brand: Vertex SKU: CK-105A FAQ What is included in the set? The set contains 52 items: bolts in multiple lengths, T-slot nuts, couplings, flanges, clamps and blocks supplied as a complete clamping kit for workshop fixturing. Which T-slot size is the kit compatible with? Compatibility with 11/16" T-slots is specified to match standard machine table grooves and enable straightforward installation of the kit’s T-slot nuts and bolts. What thread standard do the bolts use? Bolts in the kit use a 5/8"‑11 thread suitable for heavy-duty clamping and common machine table hardware. Is the kit suitable for repeatable production set‑ups? Yes. The combination of clamps, flanges and blocks in the Vertex CK-105A supports repeatable and stable fixturing for small series and prototype work. Can the kit be used for different workpiece sizes? The variety of bolt lengths and modular clamp elements allows flexible arrangements for a wide range of workpiece dimensions and fixturing scenarios. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Tool Set M20-2.5P Bolts, T-Slot 22mm, Without Plastic Case - Vertex
Take advantage of the combination of a broad size range, standardised M20 thread technology and direct T‑slot compatibility to reduce setup time and increase repeatability on the shop floor. Order the CK-20 clamping set directly via Metav Werkzeuge or consult our specialists for application-specific advice. CK-20 Clamping Tool Set (52-piece) — M20 × 2.5 studs, 22 mm T‑slot The CK-20 Clamping Tool Set is a comprehensive workholding kit designed for machine tables with 22 mm T‑slots, providing modular components for versatile fixture building in production and workshop environments. Comprehensive 52-piece workshop set M20 × 2.5 threaded studs included Compatible with 22 mm T‑slots Supplied without plastic container Faster set-up through standardised threads and sizes The kit centres on M20 × 2.5 threaded studs and a matched assortment of fixture parts, which simplifies alignment and repeatability at each clamping point. With a range of bolt lengths from 75 to 200 mm supplied in equal quantities, setups for different workpiece heights are possible without additional ordering. This standardisation enables measurable time savings during fixture changes and reduces the need for makeshift solutions, supporting a steady production rhythm and fewer machine idle periods. Secure, even clamping with modular components Included flanges, clamps and blocks distribute clamping forces evenly across the workpiece, lowering the risk of deformation while maintaining machining accuracy. The set also contains T‑nuts and couplings that pair directly with the 22 mm T‑slot interface, making it straightforward to assemble repeatable clamping configurations. For applications where consistent contact and minimal distortion matter, this modular approach improves process reliability and contributes to better end‑part quality. Practical supply and sustainability considerations Delivered without a plastic container, the set reduces unnecessary packaging waste and supports workshops aiming for more sustainable consumption. At a total mass of 27 kg, the kit is substantial yet manageable for storage on workshop racking. The configuration of components—studs, T‑nuts, flanges, couplings, clamps and blocks—allows immediate use on appropriate machine tables and reduces downtime caused by incomplete or ad‑hoc tooling. Where traceable supply and consistent availability are required, Metav Werkzeuge acts as a quality filter and sourcing partner for European workshops. Contact Metav Werkzeuge today for tailored advice on the Vertex CK-20 clamping tool set and guaranteed delivery from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CK-20 GTIN: 4061905093609 Weight: 27 kg Pieces per set: 52 T‑slot width: 22 mm Core specifications Stud thread: M20 × 2.5 Bolt lengths: 75 / 100 / 125 / 150 / 175 / 200 mm (4 each) Total bolts: 24 (4 per length) Total items: 52 Special features Supplied without plastic container Includes: T‑nuts, couplings, flanges, clamps, blocks Brand: Vertex SKU: CK-20 FAQ What is included in the set? The set contains 24 studs (4 of each length 75–200 mm), 6 T‑nuts, 4 couplings, 6 flanges, 6 clamps and 6 blocks as supplied in the CK-20 clamping tool set from Vertex. Is this set compatible with my machine table? Compatibility requires a 22 mm T‑slot; the CK-20 kit is designed to mate with that slot width and standard M20 × 2.5 thread components. Can the studs be shortened or adapted? The studs in the CK-20 are M20 × 2.5 thread; any modification should respect thread integrity and clamping safety. For application guidance, refer to Metav Werkzeuge technical advice. Does the set include a storage case? The CK-20 is supplied without a plastic container, which reduces packaging waste. Storage solutions can be chosen to match workshop preferences. Who manufactures the set and what is the SKU? The set is manufactured by Vertex and is available under SKU CK-20; further product identification is GTIN 4061905093609. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
52-Piece Clamping Tool Set With 7/16" T-Slots, 3/8"-16 Bolts - Vertex
Take advantage of a comprehensive clamping solution that pairs broad T‑slot compatibility with a complete assortment of securing components, ensuring faster set‑ups and repeatable workholding. Order this clamping solution directly via Metav Werkzeuge or consult our specialists for advice on integration into existing fixtures. Vertex CK-103A Clamping Tool Set — 7/16" T‑slot compatibility, robust fasteners The CK-103A is a clamping tool set intended for secure workholding on T‑slot tables and machining fixtures across workshops and light industrial environments. Comprehensive clamping components Compatible with 7/16" T‑slots Includes 3/8"-16 threaded bolts Compact 6.5 kg transport weight Reliable clamping for precision machining A thoughtfully composed clamping tool set delivers consistent results on milling machines and drilling stations by reducing set‑up variation and minimising rework. The kit is designed to integrate with standard T‑slot tables, enabling predictable fixturing cycles and improved throughput. For operators, the clear organisation of components shortens preparation time and supports repeatable positioning, which benefits small batch production and repair tasks where consistency is essential. Clear compatibility and standardised threads Compatibility is central to efficient fixturing: this kit matches 7/16" T‑slots and uses 3/8"-16 bolt threads, conforming to widespread workshop practice and ensuring interchangeability with common clamping hardware. These standards reduce the need for special adaptors and simplify replacement procurement. Where unfamiliar, a 7/16" T‑slot refers to the table groove dimension that accepts T‑nuts and clamps; the metric and imperial sizes provided in the set support cross‑system applications without bespoke machining. Practical benefits on the shop floor The assortment focuses on pragmatic gains: quicker changeovers, reduced tool‑holding errors and adaptable clamping layouts for different workpiece sizes. By offering a balanced mix of bolts, T‑nuts, flanges and clamps, the kit promotes modular fixture design and enhances daily productivity. For maintenance teams and jobbing shops, the ready availability of varied securing elements in a single kit translates into fewer interruptions and a smoother workflow when switching between components or operations. Compact, organised and workshop‑ready Packaged for easy storage and transport, the set’s modest 6.5 kg overall mass makes it simple to move between machines or store in bench cabinets. The components are arranged to allow rapid selection during set‑up, reducing search time and supporting a tidy workspace. This practicality suits both mobile technicians and permanent shop installations, where organised tooling reduces downtime and helps maintain process discipline. Contact Metav Werkzeuge for tailored advice on the Vertex CK-103A clamping tool set — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility with existing fixtures and delivery options from Emmerich Technical data SKU: CK-103A GTIN: 4061905083303 Brand: Vertex Product: Clamping tool set Facts T‑slot size: 7/16" Bolt thread: 3/8"-16w Total items in set: 52 Weight: 6.5 kg ECLASS: 21041790 Special features 24 bolts (4 per size: 3/4/5/6/7/8" or 75/100/125/150/175/200 mm) 6 T‑nuts 4 couplings 6 flanges 6 clamps 6 blocks FAQ Which machines is this clamping kit suitable for? The kit is suitable for milling machines, drilling machines and machining centres with a 7/16" T‑slot table; the Vertex CK-103A supports common workshop fixturing requirements. Are the bolt threads compatible with standard T‑slot nuts? Yes, the set’s 3/8"-16 bolts match standard T‑slot nuts and clamps typically used in workshop workholding systems. What exactly is included in the set? The Vertex CK-103A contains bolts in multiple lengths, T‑nuts, couplings, flanges, clamps and blocks to assemble diverse clamping arrangements. Is the kit portable for mobile service engineers? The complete set weighs 6.5 kg and is arranged for compact storage, making it practical for transport between job sites or machines. Can the components be expanded later? Components adhere to common thread and T‑slot standards, allowing straightforward expansion with additional standard clamping hardware if required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com