Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
550 N Pushrod Clamp Horizontal Foot, Metal Handle, Stainless Steel - Kukamet
The combination of stainless steel construction, a metal handle and a compact horizontal base delivers durable, corrosion-resistant clamping with reliable repeatability; the defined 550 N clamping force and 700 N holding force support consistent fixture performance. Order the clamp directly via Metav Werkzeuge or consult the team for integration advice. Kukamet 511 Rod Clamp — stainless steel, metal handle, horizontal base The Kukamet 511 rod clamp is a compact horizontal-base clamping device intended for light assembly, jigs and fixture applications where repeatable, corrosion-resistant holding is required. Stainless steel construction Metal handle for robust operation Horizontal base for stable mounting 700 N maximum holding force Consistent force for reliable process control The 511 delivers clearly defined force values that improve process stability: a 550 N clamping force for active clamping and a 700 N holding force that resists part displacement during handling. These figures indicate the clamp’s capacity to keep small components secure during assembly and intermittent machining operations. Specifying these forces in planning reduces trial-and-error on the shop floor and supports predictable cycle times, which aids root-cause analysis and quality assurance. Built to last in demanding environments Constructed from stainless steel and fitted with a metal handle, the device resists corrosion and mechanical wear that typically shorten clamp life. The material choice minimises maintenance and replacement frequency in humid or washdown-prone environments. As a result, maintenance intervals are extended and lifecycle costs fall, while surface quality of clamped parts is preserved thanks to smooth, robust contact surfaces. Compact mountings for flexible jig design A horizontal base offers a low-profile mounting option for modular fixtures and compact benches. The adjustable M4x25 spindle enables fine position setting and repeatable contact pressure without specialised tools. With a light mass of approximately 0.087 kg, the clamp simplifies layout changes and reduces the load on movable sub-assemblies, supporting rapid fixture reconfiguration and efficient small-batch production. Practical benefits for workshops and small-scale production The rod-style clamp is suitable where dependable, repeatable holding is needed without the bulk of larger toggle clamps. Integration into fixtures and assembly jigs is straightforward thanks to standard mounting geometry and the compact footprint. The result is reduced setup time and fewer stoppages due to unsecured parts, which translates into higher throughput and improved operator confidence during repetitive tasks. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 511 rod clamp into existing fixtures and for assistance with order and logistics from Emmerich. Technical Data SKU: S511-0-M GTIN: 8680731506716 Article designation: Rod clamp 511 Manufacturer: Kukamet Material: stainless steel Facts Maximum clamping force: 550 N Maximum holding force: 700 N Spindle thread: M4x25 Weight: 0.087 kg ECLASS: 21041716 ETIM: EC011973 Special features Horizontal base mounting Metal handle Compact, low-profile design Suitable for jigs and light assembly fixtures FAQ What clamping and holding forces does the clamp provide? The clamp provides a maximum clamping force of 550 N and a maximum holding force of 700 N as specified for the Kukamet 511 rod clamp. Is the clamp suitable for corrosive or washdown environments? Yes, the stainless steel construction of the Kukamet 511 makes it appropriate for environments where corrosion resistance is required. How is the clamp mounted to a fixture? The device uses a horizontal base for stable mounting and an M4x25 spindle for positional adjustment; SKU S511-0-M details are available in the technical data. Can the clamp be used in compact jigs and benches? The compact, low-profile design and light weight of the 511 facilitate use in tight fixture layouts and modular bench systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Clamp Stainless Steel Vertical Foot Clamp, 700 N Hold Force - Kukamet
Take advantage of a stainless steel build, precise 550 N clamping force and compact weight for dependable light‑duty fixturing; order the clamp via Metav Werkzeuge or request tailored advice from our consultants. Vertical clamp 212 by Kukamet — stainless steel, 550 N clamping force The vertical clamp 212 is a compact vertical clamping device for light‑duty fixtures and assembly operations, combining corrosion‑resistant construction with a low overall mass and a vertical foot for stable mounting. Stainless steel construction 550 N clamping force specification 700 N holding force capacity M4x25 pressure spindle Robust stainless steel design for long service life The stainless steel housing and components provide reliable resistance to corrosion and wear, making the clamp well suited to workshop and light industrial environments where longevity matters. The choice of stainless material reduces the need for frequent replacements and supports consistent clamping behaviour under repeated cycles. Corrosion resistance also simplifies maintenance routines, so cleaning and inspection remain straightforward even in humid or contaminant‑exposed workplaces. This supports steady production uptime and reduces unscheduled tool changes. Precise and predictable clamping performance Engineered to deliver a 550 N clamping force and a 700 N holding force, this device offers measurable and repeatable retention for small workpieces and assembly jigs. The specified forces enable planners to match fixture capability to component weight and processing demands; the compact force ratings are ideal for delicate parts that require secure restraint without distortion. The integrated M4x25 pressure spindle allows fine adjustment of contact pressure, converting specification into practical control at the clamping interface and ensuring consistent process results. Space‑saving mounting and simple integration With a vertical foot mounting arrangement and a mass of just 0.072 kg, the clamp is designed for installations where space is limited and every gram counts. Its compact footprint facilitates placement within multi‑station fixtures or modular tooling plates without significant redesign. The vertical mounting orientation aligns clamping action with gravity in many applications, improving repeatability for stacked or vertically oriented assemblies. Integration into existing systems is achieved with minimal alteration, enabling quick retrofits and shorter setup times. Operational benefits and workshop suitability The unit’s modest dimensions and stainless construction make it particularly suitable for small production lines, prototyping benches and maintenance tooling. The combination of low weight and clear force data supports ergonomic handling during fixture assembly and straightforward documentation in process sheets. Maintenance mainly involves periodic inspection of the pressure spindle and contact surface, preserving clamping integrity with minimal downtime. The specification provides a clear basis for selecting the clamp for tasks that demand predictable, gentle restraint rather than high‑force machining clamps. For dependable stainless‑steel clamping from Kukamet, request a specification check or order through Metav Werkzeuge — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice and local supply from Emmerich. Technical data Article number: S212-0 GTIN: 8682843523261 Model: 212 Manufacturer: Kukamet Facts Clamping force max: 550 N Holding force max: 700 N Weight: 0.072 kg Pressure spindle: M4x25 eClass: 21041717 ETIM: EC011973 Special features Material: stainless steel Mounting type: vertical foot No special additional features indicated Suitable for light‑duty fixturing and assembly FAQ What application is the clamp designed for? The vertical clamp 212 from Kukamet is intended for light‑duty fixtures, assembly jigs and situations requiring secure but gentle restraint of small workpieces. How are clamping and holding forces specified? Clamping is specified as 550 N maximum and holding capacity as 700 N for the Kukamet vertical clamp S212-0, providing measurable values for process planning. Which mounting arrangement is required? The unit uses a vertical foot mounting, designed for installation on fixture plates or tooling blocks with the clamp acting vertically. What material is used for the clamp body? The clamp body and components are made from stainless steel, offering corrosion resistance appropriate for workshop environments. Is the pressure spindle adjustable? Yes, the clamp is fitted with an M4x25 pressure spindle for fine adjustment of contact pressure at the clamping surface. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Clamp, Horizontal Base, Metal Handle, Stainless Steel, 700 N Holding Force - Kukamet
A compact stainless steel vertical clamp that combines 550 N clamping force with up to 700 N holding force for secure, repeatable workholding; the horizontal base and metal handle make mounting and operation straightforward. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 211 — Kukamet vertical clamp with stainless steel construction and horizontal base The Vertikalspanner 211 is a robust vertical clamp designed for light industrial and workshop workholding, offering dependable fixation for fixtures and jigs. *Stainless steel construction for durability *Horizontal base for easy mounting *550 N clamping force for reliable holding *Metal handle for positive operation Dependable holding where precision matters Constructed from stainless steel, this vertical clamp delivers a defined combination of 550 N clamping force and 700 N maximum holding force, values that translate directly into reliable part retention during manual operations and low-force machining. Specifying these figures makes it clear how the clamp performs under load: the clamping force describes the applied pressure during actuation, while the holding force describes the sustained resistance against part displacement. This clarity supports planning for fixture design and risk reduction in repetitive processes. Quick installation and robust operation for efficient workflows The horizontal base design allows simple integration into T-slotted tables, fixture plates or welded frames, reducing setup time during changeovers. A metal handle ensures positive actuation and long service life, even under frequent use. At just 0.08 kg, the unit is light enough for retrofitting existing jigs without adding significant mass, yet engineered to resist corrosion and mechanical wear. The result is a compact clamping solution that improves operational uptime and lowers the need for frequent replacement. Practical applications and measurable process benefits Ideal for small fixtures, assembly stations and inspection jigs, this vertical clamp supports repeatable positioning and consistent clamping force, which in turn reduces rework and inspection cycles. Using a compact, stainless device for routine clamping contributes to a tidy workstation and fewer unplanned interruptions. The straightforward mechanics mean simple maintenance and predictable behaviour when incorporated into manual or semi-automated production processes; the Vertikalspanner 211 offers a pragmatic balance between durability and ease of use. For procurement advice or to arrange supply from our European hub, contact Metav Werkzeuge for personalised guidance and prompt delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S211-0-M GTIN: 8680731509106 EClass: 21041717 ETIM: EC011973 Article name: Vertikalspanner 211 Manufacturer: Kukamet Core figures Weight: 0.08 kg Clamping force (max): 550 N Holding force (max): 700 N Materials & special features Material: Stainless steel Fastening: Horizontal base (waagerechter Fuß) Handle: Metal (Griff aus Metall) Clamping spindle: M4x25 Category: Spanner FAQ What do the clamping and holding forces mean in practical terms? Clamping force (550 N) denotes the force applied during activation; holding force (700 N) indicates the maximum sustained resistance against displacement. These values show how the Vertikalspanner 211 performs under load and help when designing fixtures. Which mounting options are compatible with this clamp? The horizontal base is suited to T-slot tables, fixture plates and flat mounting surfaces; the compact footprint allows straightforward retrofitting into existing jigs without major modification. Is the clamp suitable for corrosive workshop environments? Constructed from stainless steel, the clamp offers enhanced resistance to corrosion compared with untreated steel, supporting longevity in demanding workshop conditions. What maintenance is required for reliable operation? Periodic inspection of the spindle and handle for wear, occasional lubrication of moving parts and checking the mounting fasteners keep the vertical clamp functioning reliably over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Clamp, Metal Handle, Zinc Plated, 700 N Holding Force - Kukamet
Combine robust zinc-plated construction with a compact design and reliable 700 N holding force for dependable vertical clamping in fixtures and jigs; the metal handle and M4 x 25 pressure spindle allow quick setup and consistent pressure. Order the clamp directly via Metav Werkzeuge or consult the specialists for tailored advice. Vertical clamp 212 — vertical clamp, zinc-plated with metal handle (Kukamet) Vertical clamp 212 is a compact, zinc-plated vertical-foot clamping device delivering controlled clamping and holding forces for workshop and production fixture applications. Zinc-plated corrosion protection Metal handle for robust operation Vertical-foot mounting for stable setup 700 N maximum holding force Robust clamping performance for precise fixture work The Vertical clamp 212 offers a clear technical advantage where repeatable holding is required. With a maximum clamping force of 550 N and a maximum holding force of 700 N, the device secures components reliably in jigs and assembly stations. The zinc-plated finish provides basic corrosion resistance suitable for workshop environments, while the metal handle ensures long-term mechanical integrity. Stated forces are expressed in newtons to allow direct comparison with other clamping elements in engineering specifications. Practical mounting and adjustment for production use Designed for vertical-foot mounting, the clamp installs directly onto base plates or fixture rails for compact layouts. The integrated pressure spindle M4 x 25 enables fine axial adjustment of contact pressure and compensates for minor workpiece height variations, which simplifies set-up and reduces fixture changeover time. Where clamping and holding forces differ, the first value refers to the applied pressing capacity and the second to residual retention — understanding this distinction assists in selecting the correct clamping element for dynamic or static loads. Compact, lightweight savings with durable operation At just 0.08 kg, the unit is lightweight yet durable, making it suitable for dense fixture designs where space and mass are at a premium. The combination of zinc-plated surface and a metal handle delivers a balance of corrosion protection and mechanical robustness ideal for repetitive clamping cycles. Sourcing through Metav provides the reassurance of a European quality filter: reliable supply from Emmerich, a broad product range for consolidated procurement, and an established partner for industrial measurement and tooling needs. For a dependable, space-saving clamping solution from Kukamet, contact Metav Werkzeuge for procurement and technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 212-0-M GTIN: 8682843520260 Material: Zinc-plated Model: 212 SKU: 212-0-M Core technical data Max. clamping force: 550 N Max. holding force: 700 N Pressure spindle: M4 x 25 Weight: 0.08 kg eCl@ss: 21041717 ETIM: EC011973 Special features Metal handle Vertical-foot mounting Zinc-plated finish FAQ What clamping and holding forces does this clamp provide? The Vertical clamp 212 offers a maximum clamping force of 550 N and a maximum holding force of 700 N, making it suitable for common fixture and jig retention tasks. How is the clamp mounted in a fixture? Mounting is by a vertical foot arrangement; this vertical-foot mounting secures the clamp to base plates or fixture rails for stable positioning in production setups. What adjustment is available for contact pressure? Contact pressure is set via the M4 x 25 pressure spindle, which allows fine axial adjustment to adapt to slight workpiece height variations. Is the surface finish suitable for workshop environments? The zinc-plated finish provides corrosion resistance appropriate for general workshop conditions; the metal handle adds mechanical durability for repetitive operation. Can the clamp be used in tight, space-constrained fixtures? Yes, at 0.08 kg the unit is compact and lightweight, designed for space-efficient fixture arrangements while maintaining reliable holding performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Toggle Clamp Vertical Foot Mount, 700 N Hold Force, Blackened Finish - Kukamet
Take advantage of the compact design with 700 N holding force and 550 N clamping force, combined with a fine-adjustment pressure spindle (M4 x 25) for repeatable fixtures. Secure supply and expert advice are available via Metav Werkzeuge — order the 212 vertical clamp directly through Metav Werkzeuge or consult the team for application guidance. 212 Vertical clamp by Kukamet — 700 N holding force, vertical foot mounting A 212 vertical clamp designed for secure vertical clamping in jigs, fixtures and assembly applications where compact size and reliable repeatability are required 700 N maximum holding force 550 N maximum clamping force Vertical foot mounting for vertical use Pressure spindle M4 x 25 for fine adjustment Consistent clamping force for repeatable production The clamp delivers a 700 N holding force and 550 N clamping force, providing a stable hold for small to medium workpieces. The clear numerical values support process planning and machine integration, helping to reduce rework and increase throughput. Thanks to its compact footprint and low weight, the device is well suited for fixtures where space is limited but consistent pressure is crucial. The mechanical design emphasises repeatability, which supports efficient, measurable production routines. Precise adjustment and simple integration A threaded M4 x 25 pressure spindle enables incremental adjustment of contact pressure and position, facilitating fine tuning directly at the fixture. The vertical foot mounting allows straightforward installation on vertical surfaces and plates, simplifying retrofits and custom jig builds. The lightweight construction reduces load on moving subassemblies while the clear mounting style helps planners and fitters estimate fixture layout quickly and accurately. Robust finish for workshop conditions The clamp is supplied in a black blued finish that resists corrosion in general workshop environments and maintains a professional appearance over time. The surface treatment combines visual durability with practical protection during handling and assembly operations. This finish supports long-term serviceability and fits well into mixed-material workstations without introducing significant maintenance requirements. Minimal complexity, high reliability With no additional arm fitted and no special accessories required, the component offers a straightforward mechanical solution for vertical clamping tasks. The simple kinematics reduce adjustment points and potential failure modes, supporting predictable life cycles and ease of replacement within maintenance routines. The compact mass and clear specification make it an effective choice for both single-station jigs and larger fixture arrays. Secure supply of Kukamet components via Metav Werkzeuge — contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B212-0 GTIN: 8682843522257 eClass: 21041717 ETIM: EC011973 Facts Maximum holding force: 700 N Maximum clamping force: 550 N Weight: 0.072 kg Pressure spindle: M4 x 25 Special features Material: Black blued Fastening type: Vertical foot Arm: Not applicable Special feature: None FAQ What holding force does the clamp provide? The clamp delivers a maximum holding force of 700 N, specified for reliable retention in fixture applications. Is the clamping pressure adjustable? Yes, the component uses an M4 x 25 pressure spindle for fine adjustment of clamping pressure and contact position. How is the clamp mounted? The device is designed for vertical foot mounting, enabling straightforward installation on vertical plates and fixture bases. What surface finish does the product have? The clamp is supplied with a black blued finish, offering practical corrosion resistance suitable for workshop conditions. Which SKU identifies this clamp? This product is listed as SKU B212-0 and is identified by GTIN 8682843522257 for ordering and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Push Rod Clamp Horizontal Base Zinc Plated, 700N Hold Force - Kukamet
Compact, zinc‑plated and designed for horizontal mounting, the 511 Push‑rod clamp delivers a dependable holding force of 700 N together with a maximum pressure force of 550 N, ensuring secure workpiece retention in repetitive fixtures; order directly via Metav Werkzeuge or ask our consultants for application advice. 511 Push‑rod clamp – horizontal base, zinc‑plated by Kukamet The 511 Push‑rod clamp is a compact clamping element for horizontal mounting, suited to fixture and jig applications where space is limited and consistent clamping force is required. Zinc‑plated corrosion resistance Horizontal mounting base Max holding force 700 N Pressure spindle M4x25 Consistent clamping force for reliable production Built for repetitive use, this clamp offers a holding force of 700 N and a maximum pressure force of 550 N, values that translate into stable workpiece fixation during machining and assembly tasks. The listed forces describe the clamp’s ability to resist movement under load: the holding force indicates sustained retention once engaged, while the pressure force denotes the maximum actuation force applied by the spindle. These measurable characteristics support process reliability and reduce scrap caused by slippage, making the component suitable for small to medium production runs where predictable clamping behaviour is essential. Space-saving mounting and straightforward integration The compact design and horizontal mounting base allow the clamp to be integrated into confined fixture layouts without complex modifications. A M4x25 pressure spindle enables fine adjustment of contact pressure and straightforward replacement if required. At just 0.092 kg, the unit minimises added mass on moving fixtures and is easy to position during assembly. The simple mounting geometry reduces engineering time for jigs and makes retrofitting to existing pallets or benches efficient, lowering installation effort while maintaining repeatable clamping engagement. Durable finish and low-maintenance operation Constructed from zinc‑plated material, the clamp resists corrosion in typical workshop environments and preserves reliable contact surfaces over time. The protective finish reduces the need for frequent maintenance and preserves dimensional stability during regular use. As a robust clamping element, it is aimed at technicians and production engineers seeking dependable fixation in general workshop and light industrial applications. Reliability of supply and straightforward technical data help planners dimension fixtures with confidence, while the compact form factor supports ergonomic handling on the shop floor. Contact Metav Werkzeuge for tailored advice on integrating Kukamet push‑rod clamps into fixtures; technical support and reliable supply are available from our Emmerich base — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 511-0 GTIN: 8680731508857 Manufacturer: Kukamet Facts Max pressure force: 550 N Max holding force: 700 N Weight: 0.092 kg ECLASS: 21041716 ETIM: EC011973 Special features Material: Zinc‑plated Mounting: horizontal base Pressure spindle: M4x25 Designation: Push‑rod clamp (Schubstangenspanner) SKU: 511-0 FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 700 N, suitable for secure retention in light to medium fixture applications. Which spindle is fitted and can it be replaced? The unit is fitted with an M4x25 pressure spindle; the spindle is a replaceable component and allows fine adjustment of contact pressure. Is the clamp suitable for workshop environments with occasional moisture? Yes, the zinc‑plated finish offers corrosion resistance appropriate for standard workshop conditions and reduces maintenance needs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Pushrod Clamp Horizontal Foot Metal Handle, 700N Holding Force, Zinc Plated - Kukamet
Reliable clamping with a galvanised body and metal handle ensures durable, repeatable performance; the compact design and horizontal foot enable fast integration into assembly jigs. Take advantage of the combination of sturdy construction, clear force ratings and simple mounting for dependable small-part workholding. Order the push-rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 511 — lever clamp with galvanised finish and horizontal foot (Kukamet) The Push-rod clamp 511 is a compact lever clamp designed for secure temporary fixturing in workshop and light industrial assembly applications. Galvanised steel construction for corrosion resistance Metal handle for durable operation Horizontal foot mounting for fixed installation Holding force up to 700 N Durable construction that keeps fixtures reliable The galvanised steel body delivers long-term corrosion protection while the metal handle resists wear under frequent operation, reducing lifecycle costs and downtime. With a rated pressing capacity of 550 N and a measured holding capability beyond that, the design provides a reliable margin for repetitive clamping tasks. This combination of corrosion resistance and mechanical resilience means less maintenance and fewer replacement purchases for routine shop use. Consistent holding and straightforward mounting for repeatable results Engineered for predictable performance, the clamp offers a clear holding force rating of 700 N, making load planning and fixture design straightforward. The horizontal foot mounting allows a low-profile installation on jigs, plates or assembly benches, enabling quick alignment and secure fixation of components. Where process repeatability matters, this clamp contributes to consistent cycle times and reduced rework. Compact format to save space and speed up setups Weighing only 0.087 kg and equipped with an M4x25 pressure spindle, the unit fits into compact fixtures without adding bulk, simplifying layout in constrained work areas. The small footprint and lever action permit rapid engagement and release, improving operator efficiency during batch assembly or test cycles. As a practical workholding element, it supports a smoother workflow and easier integration into existing fixtures. For reliable lever clamping from Kukamet, order the Push-rod clamp 511 via Metav Werkzeuge in Emmerich — for technical guidance or procurement assistance contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 511-0-M SKU: 511-0-M GTIN: 8680731504941 ECLASS: 21041716 ETIM: EC011973 Facts Weight: 0.087 kg Pressing force: 550 N Holding force: 700 N Spindle thread: M4x25 Special features Material: galvanised (zinc-plated) steel Foot type: horizontal foot Handle: metal Category: clamp (lever/rod clamp) FAQ What is the maximum holding force of this clamp? The clamp offers a holding force of up to 700 N; the Push-rod clamp 511 from Kukamet is specified for reliable short-term fixturing at that rating. Which mounting orientation is required for installation? A horizontal foot is provided for fixed mounting; the horizontal foot design supports low-profile installation on plates and jigs. Is the clamp corrosion-resistant for workshop use? Yes, the body is galvanised (zinc-plated), giving the clamp improved resistance to rust in normal workshop environments. What spindle specification does the clamp use? The pressure spindle is M4x25, suitable for fine adjustment within the clamp’s operating range. Can this clamp be used for repetitive production cycles? The robust metal handle and galvanised construction make the clamp well suited to frequent operation and short-cycle production tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Stainless Steel Pushrod Clamp Horizontal Foot M4x25, 700N Hold Force - Kukamet
Take advantage of the combination of stainless steel construction, compact 92 g weight and reliable 700 N holding force for secure, repeatable clamping in confined setups. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 511 — horizontal-foot stainless-steel lever clamp by Kukamet The Push-rod clamp 511 is a compact lever clamp designed for horizontal mounting and light-duty production or assembly hold-downs. Stainless steel construction Horizontal foot mounting Holding force up to 700 N Compact 92 g weight Secure clamping where space is limited Compact design and a pronounced holding force make this lever clamp ideal for fixtures with restricted clearance. The combination of a low mass (approximately 0.092 kg) and a maximum holding force of 700 N delivers secure retention without adding bulk to the setup. For applications that require positive location rather than heavy press loads, the device provides consistent repeatability, reducing rework and setup time. Durable materials that withstand shop environments Manufactured from stainless steel, the clamp resists corrosion and wear in demanding workshop conditions, supporting a long service life and predictable performance. The M4x25 spindle enables straightforward fastening and replacement using standard tooling; this simplifies maintenance and minimises machine downtime. The robust construction translates into fewer interruptions and reliable part handling over extended production runs. Fast mounting and clear technical specification for procurement A horizontal foot mounting plate allows quick integration into jigs and fixtures, saving time during assembly and retrofit. The clear specification of 550 N clamping force versus 700 N holding force helps planners choose the correct component: clamping force refers to the adjustable contact pressure, while holding force indicates the maximum retention capacity under load. This distinction supports accurate risk assessment and component matching in fixtures and test rigs. Contact Metav Werkzeuge for tailored advice and ordering of Kukamet push-rod clamp 511 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S511-0 GTIN: 8682843523414 SKU: S511-0 Key figures Weight: 0.092 kg Clamping force: 550 N Holding force: 700 N Spindle: M4x25 Materials & features Material: Stainless steel Mounting: Horizontal foot Product type: Push-rod clamp Special feature: None FAQ What is the primary application for this clamp? The Push-rod clamp 511 is suited for light-duty hold-down and fixture tasks where a compact, horizontal-mounted lever clamp is needed for reliable retention. Can the clamp be used in humid or corrosive environments? Yes, the stainless steel construction of the Kukamet clamp 511 offers improved corrosion resistance compared with standard steel clamps, making it suitable for many workshop environments. How does clamping force differ from holding force on this product? Clamping force (550 N) denotes the contact pressure applied by the spindle, while holding force (700 N) indicates the maximum retention capacity the clamp can resist during operation. Is the spindle replaceable or serviceable? The M4x25 spindle is a standard size and can be replaced or serviced using common workshop tools; this supports simple maintenance procedures for the clamp 511. What mounting options are available? The clamp is supplied with a horizontal foot for secure attachment to fixtures and jigs where a low-profile horizontal mount is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp Horizontal Foot Zinc-Plated, 700N Holding Force - Kukamet
Take advantage of a compact, galvanised vertical clamping solution that combines 700 N holding force with a refined M4×25 pressure spindle for precise setting and consistent workholding. Order directly through Metav Werkzeuge or consult the Metav team for specification advice and reliable supply from Emmerich. 211 Vertical clamp – Vertical clamping device with 700 N holding force (Kukamet) The 211 vertical clamp is a compact, galvanised vertical clamping device designed for secure positioning of small workpieces in jigs and fixtures, offering reliable holding and repeatable adjustment. Compact galvanised construction for corrosion resistance 700 N maximum holding force for secure retention Horizontal foot mounting for stable fixture integration M4×25 pressure spindle for fine clamping adjustment Lightweight at 0.072 kg for minimal fixture load Secure clamping that reduces rework and downtime With a 700 N holding force and a 550 N clamping force, this vertical clamping device delivers reliable retention during light machining, assembly and inspection tasks. The measurable forces translate into predictable performance on the shopfloor, reducing the risk of part movement and associated rejects. The mechanical design emphasises consistent contact pressure, which supports process stability and fewer interruptions during small-batch or repetitive production runs. Durable finish and low fixture load for long service life The galvanised finish provides robust surface protection against corrosion while keeping the component light at 0.072 kg, which helps to avoid unnecessary stress on modular fixtures and movable tooling. The combination of a protective coating and a low mass makes this clamp suitable for environments where longevity and low maintenance are priorities, delivering dependable performance without frequent replacement. Flexible mounting and precise adjustment for accurate set-up Equipped with a horizontal foot for straightforward attachment to base plates and a M4×25 pressure spindle for precise pressure setting, the device integrates easily into existing jigs. The horizontal-foot configuration allows secure anchoring on flat surfaces, while the fine-thread pressure spindle enables incremental adjustment of clamping force, supporting repeatable set-ups and quick changeovers. Practical fit for jigs, fixtures and small-part handling Designed for compact fixtures, the vertical clamping device adapts well to assembly stations and inspection rigs where space is limited but reliable holding is required. Its small footprint and defined clamping forces make it a practical choice for production lines and bench-mounted fixtures that demand consistent, measurable performance rather than large-scale heavy-duty clamping. For dependable small-part clamping with Kukamet quality, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: 211-0 GTIN: 8680731503913 Article: Vertikalspanner 211 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 0.072 kg Max holding force: 700 N Max clamping force: 550 N Pressure spindle: M4×25 Special features Material / finish: galvanised Mounting: horizontal foot Arm: Not applicable Special features: None FAQ What is the maximum holding force of the 211 vertical clamp? The 211 vertical clamp offers a maximum holding force of 700 N, providing secure retention for small workpieces in fixtures and jigs. How is the device mounted to a fixture? Mounting is via a horizontal foot, allowing stable attachment to flat base plates or fixture rails for straightforward integration. What material and finish does the clamp have? The clamp is galvanised, giving a corrosion-resistant surface suitable for workshop environments where a protective finish is required. Is an arm included with this vertical clamping device? No arm is applicable for this model; the entry for arm is listed as not applicable for the 211 vertical clamp. What adjustment is used to set clamping pressure? Clamping pressure is set with an M4×25 pressure spindle, which permits fine and repeatable adjustment of the contact pressure. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp Wafer Style, Stainless Steel, Horizontal Base - Kukamet
Compact stainless steel construction paired with a 700 N holding force and a 550 N pressing force ensures reliable, space-saving clamping in repetitive production tasks; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 211 by Kukamet — stainless steel, 700 N holding force The Vertical clamp 211 is a compact lever clamp designed for secure workholding in fixtures and jigs, suitable where a horizontal-foot attachment and corrosion-resistant materials are required. Stainless steel construction for corrosion resistance Holding force 700 N for secure clamping Pressing force 550 N for reliable workholding Horizontal foot for stable attachment Secure clamping for repeatable processes The robust 700 N holding force provides a measurable improvement in workpiece retention compared with standard small clamps, reducing slippage during machining or assembly. Designed for repetitive production, the device uses a low-mass form factor (approximately 0.072 kg) to minimise added inertia in moving fixtures while maintaining consistent clamping performance. The combination of high holding capacity and lightweight design supports faster cycle times and predictable process stability, which is particularly beneficial in automated or semi-automated setups. Precise force application with standard pressure spindle A threaded M4x25 pressure spindle enables controlled contact pressure and straightforward adjustment to different workpiece geometries. The spindle specification is industry-standard, allowing simple replacement or retrofitting within existing jigs. By separating the 550 N pressing force from the holding characteristic, the clamp ensures that delicate components are not overloaded while preserving firm retention when required. The technical layout supports maintenance workflows through easy access to the spindle and clamping elements. Durable material selection for harsh environments Constructed from stainless steel, the clamp resists corrosion and surface wear in humid or chemically aggressive environments. This material choice extends service life and reduces the need for frequent replacements, contributing to lower total cost of ownership. Where cleanliness is essential—laboratory jigs or food-industry fixtures—the stainless finish simplifies cleaning and complies with common hygiene expectations for workshop equipment. The absence of additional coatings avoids contamination risks and supports a predictable friction behaviour at the contact points. Flexible mounting and integration into fixtures The horizontal-foot mounting offers a stable base for integration into plates, rails or bespoke fixtures. Its compact footprint makes it suitable for tight clamping arrays and nesting stations where space is at a premium. The clamp’s standard dimensions and attachment type facilitate rapid planning and retrofitting into existing assemblies, improving uptime through minimal redesign effort. For OEMs and tool-room engineers, the clamp represents a pragmatic choice when balancing fixture density with accessible operation. Contact Metav Werkzeuge for detailed specification matching and reliable supply of Kukamet vertical clamps, including the stainless-steel 211 model with 700 N holding force Technical data Article number: S211-0 GTIN: 8682843523254 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Weight: 0.072 kg Holding force (max): 700 N Pressing force (max): 550 N Pressure spindle: M4x25 Materials & features Material: stainless steel Mounting: horizontal foot Special features: none specified Type: vertical lever clamp FAQ What is the maximum holding force of the clamp? The Vertical clamp 211 provides a maximum holding force of 700 N, ensuring secure retention in fixture applications. Which material is the clamp made from? The clamp is manufactured from stainless steel, offering corrosion resistance and easy cleaning for demanding environments. How is the pressure adjusted on the clamp? Adjustment is achieved via an M4x25 pressure spindle, allowing fine control of contact pressure for different workpiece types. Is the clamp suitable for tight fixture arrays? Yes, the compact, low-weight design of the 211 makes it well suited to dense fixture layouts and nesting stations. Who supplies the Kukamet 211 clamp in Europe? Kukamet vertical clamps, including the 211 model, are distributed through Metav Werkzeuge and can be procured or specified via their consultancy. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp With M4x25 Spindle, Metal Handle, Blackened Finish - Kukamet
A compact, economical vertical clamp that combines a 700 N holding force with a 550 N pressing force for reliable light-duty workholding; the blackened finish and metal handle increase longevity while the vertical-foot mounting allows straightforward fixture integration. Order the vertical clamp directly via Metav Werkzeuge or contact their consultants for tailored advice. Vertical clamp 212 by Kukamet — 700 N holding force, metal handle The Vertical clamp 212 is a compact workholding device designed for vertical-foot mounting, providing secure clamping for light-duty fixtures and assembly jigs. 700 N maximum holding force 550 N maximum pressing force Metal handle for durable operation Vertical-foot mounting for secure positioning Secure clamping for repeatable setups The clamp delivers a 700 N maximum holding force together with a 550 N pressing force, which is sufficient for repeatable, low-to-medium load fixtures. These figures translate into less re‑positioning and fewer fixture failures in batch runs, improving process reliability. The clamping action is engineered to be consistent, so set-up times are reduced and cycle stability is increased, supporting a measurable gain in operational efficiency. Compact design for flexible fixture layouts Weighing just 0.08 kg, the unit integrates easily into compact assemblies and tight workspaces. The vertical-foot mounting keeps the footprint minimal while the M4x25 thread spindle provides a standardised connection for clamp spindles or adapters. The light mass of the component minimises load on delicate jigs and allows for convenient retrofitting into existing fixture plates without extensive rework. Built for durability and low maintenance Surface protection is provided by a blackened finish, which resists wear and helps to limit surface corrosion in standard workshop environments. A metal handle ensures robust actuation over repeated cycles and reduces the risk of deformation compared with polymer levers. These design choices lower life‑cycle costs through extended service intervals and predictable replacement cycles. Practical fit for workshop and small-batch production The 212 model is well suited to assembly jigs, test fixtures and small-series machining where compact, dependable clamping is required. Its straightforward mounting and proven mechanical values make it a pragmatic choice for engineering departments and maintenance workshops seeking cost-effective workholding. Certification codes and product classification are provided in the technical section for procurement and inventory control. For reliable small-workholding solutions or to discuss how the 212 clamp fits specific fixtures, contact Metav Werkzeuge for a delivery quote or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B212-0-M GTIN: 8680731507812 Manufacturer: Kukamet Core technical data Maximum holding force: 700 N Maximum pressing force: 550 N Weight: 0.08 kg eClass: 21041717 ETIM: EC011973 Materials & features Blackened finish Metal handle Vertical-foot mounting Thread spindle M4x25 Arm: not applicable FAQ What clamping and pressing forces does this clamp provide? The vertical clamp offers a maximum holding force of 700 N and a maximum pressing force of 550 N, values that are specified for the 212 model by Kukamet. Can the clamp be mounted on standard fixture plates? Yes, the vertical-foot mounting and M4x25 thread spindle allow straightforward attachment to common fixture plates and custom jigs. Is the surface treatment suitable for workshop use? The blackened finish on the clamp provides enhanced resistance to wear and surface corrosion under normal workshop conditions. How heavy is the clamp and does that affect fixture balance? At 0.08 kg the clamp is very light, which minimises its impact on fixture balance and enables use in compact assemblies. What type of handle is used and how durable is it? A metal handle is used for actuation; this increases durability and reduces deformation risk over repeated cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp With Metal Handle, Horizontal Foot, 700N Holding Force, Blackened Finish - Kukamet
Take advantage of a compact, durable clamp that combines high holding force, a metal handle and a horizontal base for straightforward fixture integration; order the 211 vertical toggle clamp directly via Metav Werkzeuge or contact the consultants for application advice. 211 Vertical toggle clamp — vertical toggle clamp with metal handle and horizontal base (Kukamet) A 211 vertical toggle clamp designed for secure workpiece retention in machining and assembly fixtures, offering a compact footprint and reliable mechanical clamping for repetitive production tasks Metal handle for durable operation Horizontal base for flat mounting Holding force up to 700 N Pressure spindle M4 x 25 mm for fine adjustment Consistent clamping performance that supports efficient workflows The compact design delivers repeatable clamping with a maximum holding force of 700 N and a maximum pressing force of 550 N, ensuring secure fixation during milling, drilling or assembly operations. The distinction between holding and pressing force is important: the holding force indicates how much load the clamped workpiece resists, while the pressing force refers to the actual contact pressure applied by the spindle. These values support reliable fixture design and help to calculate safety margins for machining processes, reducing setup time and minimising rework in production. Simple mounting and precise adjustment for fixture integration A horizontal base permits direct mounting to tooling plates or jigs, while the pressure spindle M4 x 25 mm allows fine vertical adjustment to accommodate varying workpiece heights. With a lightweight construction of 0.08 kg, the clamp is easy to position during fixture assembly without compromising stability. The metal handle provides tactile durability for frequent actuation and resists deformation under repeated cycles, which contributes to predictable clamp behaviour in series production. Durable finish and low-maintenance operation for workshop use Finished in a blackened (bruised) coating, the clamp resists surface wear and offers basic protection against corrosion in typical workshop environments. The compact toggle mechanism is engineered for straightforward integration into existing tooling concepts, requiring minimal ongoing maintenance; occasional lubrication of the pivot points preserves smooth action and prolongs service life. As a compact clamping element, the unit supports modular fixture concepts and helps to reduce the number of bespoke components needed for efficient production workflows. For specific application guidance or to request dimensional drawings and lead times, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich Technical data SKU: B211-0-M GTIN: 8680731507607 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Core data Weight: 0.08 kg Holding force (max): 700 N Pressing force (max): 550 N Pressure spindle: M4 x 25 mm Special features Material/finish: blackened Mounting type: horizontal base Handle: metal Category: toggle clamp FAQ What is the difference between holding force and pressing force? Holding force describes the maximum load the clamp will retain without slippage, while pressing force indicates the applied contact pressure; the 211 vertical toggle clamp shows 700 N holding force and 550 N pressing force for safe fixture calculation. Can the clamp be mounted directly to a tooling plate? Yes, the horizontal base design enables direct mounting to tooling plates and jigs for quick fixture assembly. Is the pressure spindle adjustable for different workpiece heights? The clamp uses a pressure spindle M4 x 25 mm that provides fine vertical adjustment to compensate for varying workpiece thicknesses. How resistant is the finish to workshop conditions? The blackened finish offers surface wear resistance and basic corrosion protection suitable for general workshop environments; regular lubrication of pivot points is recommended. Which SKU should be specified when ordering this clamp? Specify SKU B211-0-M and the product description for clear identification when ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp With Metal Handle, M4x25 Spindle, Stainless Steel - Kukamet
Take advantage of the combination of robust stainless steel construction, compact footprint and reliable holding performance to keep assembly and fixture tasks steady and repeatable; order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Vertikalspanner 212 – stainless steel vertical clamp with metal handle The Vertikalspanner 212 is a compact vertical clamp designed for secure fixture mounting in production and workshop jigs, offering precise pressure adjustment and corrosion-resistant durability. Stainless steel construction Metal handle for secure operation Vertical base for stable mounting Holding force up to 700 N Stable clamping that keeps processes running The vertical clamp delivers a consistent holding force of 700 N and a maximum pressing (clamping) force of 550 N, which translates into dependable part retention during assembly and light machining. Built from stainless steel, the device resists corrosion and wear, so fixtures remain accurate over repeated cycles. The compact, low-mass design minimises added inertia on a jig while the metal handle provides tactile feedback during engagement, reducing the risk of slippage and rework. For plant planners and workshop managers, this means fewer stoppages and a more predictable production flow. Precise pressure control in a small footprint Adjustment is made via an M4x25 pressure spindle, allowing fine tuning of clamping pressure without specialised tools. The spindle mechanism enables controlled contact force, preventing damage to delicate components while maintaining adequate grip on heavier parts. At just 0.08 kg, the clamp is suitable for integration into bespoke fixtures and automated stations where space and weight budgets are limited. The vertical base mounting ensures a secure attachment to stands or plates, improving repeatability compared with ad hoc clamping solutions. Versatile use across assembly and inspection fixtures Designed for workshop and light industrial use, the clamp suits repetitive assembly, holding in inspection jigs and simple fixtures on small production lines. The robust material choice and precise mechanical elements make it appropriate where corrosion resistance and longevity are priorities. Installation is straightforward: the vertical foot provides a stable mounting surface and the compact form factor simplifies retrofitting into existing tooling. For procurement teams seeking to reduce supplier variety without compromising quality, the unit supports standardisation of clamping elements across multiple workstations. Contact Metav Werkzeuge for tailored clamping solutions and request the Kukamet Vertikalspanner 212 (SKU S212-0-M) to integrate high-reliability vertical clamping into workshop fixtures; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and next steps Technical data SKU: S212-0-M GTIN: 8680731509175 Article name: Vertikalspanner 212 EClass: 21041717 ETIM: EC011973 Key figures Holding force: 700 N Clamping/pressing force: 550 N Weight: 0.08 kg Pressure spindle: M4x25 Features Material: stainless steel Mounting: vertical base Handle: metal Category: clamps / spanner FAQ What materials is the clamp made from and why does that matter? The clamp is made from stainless steel, which gives the Kukamet Vertikalspanner 212 excellent corrosion resistance and longevity in workshop environments, helping to maintain fixture accuracy over time. How is the clamping force adjusted? Clamping pressure is set via the M4x25 pressure spindle; this allows fine mechanical adjustment so the clamp can secure delicate parts without overloading them. Can the clamp be mounted on standard fixture plates? Yes, the vertical base is designed for stable mounting on plates and stands commonly used in assembly and inspection jigs, making integration into existing tooling straightforward. What loads can the clamp hold during operation? The device provides up to 700 N holding force and a maximum pressing force of 550 N, suitable for many light industrial and assembly tasks where secure retention is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
555mm Drawbar M12x1.75P Threaded, 0.6kg - Vertex
Reliable tool retention and straightforward integration are ensured by the combination of the M12 x 1.75 thread and the 555 mm length; the low mass contributes to faster spindle acceleration and reduced wear. Order the drawbar directly via Metav Werkzeuge or consult the Metav team for application advice and delivery options. VDR-NT30M-S drawbar by Vertex — M12 x 1.75 thread, 555 mm length The VDR-NT30M-S is a drawbar designed to provide secure axial clamping in machine tool toolholding systems, suited for workshops and production environments requiring reliable retention and quick spindle response. M12 x 1.75 thread for secure clamping 555 mm overall length for extended reach Lightweight construction at 0.6 kg for faster dynamics Consistent clamping for uninterrupted production A drawbar serves to pull and lock a tool holder into the spindle taper; the M12 x 1.75 thread of this component provides a standardised interface for retention systems. The precise thread pitch ensures consistent axial preload, which reduces micro-movement between spindle and tool holder during cutting. For production environments this translates into less tool run-out, improved repeatability and fewer rejects. The specification also supports predictable maintenance intervals, as thread condition and torque behaviour are easily checked during routine inspection. Fitment that reduces downtime and simplifies inspection The 555 mm length offers reach for deeper spindles or extended toolholder configurations while remaining compact enough for efficient handling. The geometry is optimised to allow rapid engagement and disengagement without complex adapters, supporting faster tool changes and shorter cycle times. Lightweight at 0.6 kg, the component contributes to lower inertial loads on the spindle, aiding acceleration and deceleration phases. Inspection procedures are straightforward: visual checks of the thread and measuring the overall length are usually sufficient to confirm usability, helping workshops maintain throughput with minimal disruption. Robustness and predictable workshop economics Constructed to industry standards and delivered under the Vertex designation, this drawbar emphasises reliable performance rather than unnecessary complexity. The specification favours components that are easy to replace and verify, supporting a pragmatic approach to spare-part management. By choosing a standardised retention element, toolholding systems benefit from simplified stocking and consistent behaviour across machine fleets. This predictability supports long-term planning and reduces hidden operating costs associated with unexpected tool clamping failures. Contact Metav Werkzeuge in Emmerich for application-specific advice and to arrange delivery of the Vertex VDR-NT30M-S drawbar; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number: VDR-NT30M-S GTIN: 4061905092251 Manufacturer: Vertex Core specifications Length: 555 mm Thread: M12x1,75P Weight: 0.6 kg eClass: 23309104 Design details SKU / UID: VDR-NT30M-S Brand: Vertex Image asset available FAQ What is the primary function of this drawbar? The VDR-NT30M-S drawbar is used to pull and secure a tool holder into the spindle taper, providing axial clamping for machining operations. Which thread specification does the component use and why does it matter? The component uses an M12 x 1.75 thread; this standardised pitch ensures reliable torque transfer and repeatable axial preload for consistent tool retention. Is the length suitable for deep spindle setups? The 555 mm overall length provides extended reach for deeper spindles or toolholder arrangements while maintaining manageable handling characteristics. How does the weight affect spindle performance? At approximately 0.6 kg, the drawbar contributes minimal additional inertia, aiding quicker spindle acceleration and deceleration, which can improve cycle times. Can the VDR-NT30M-S be inspected easily during routine maintenance? Yes, routine inspection typically involves checking the thread condition and measuring the overall length; the straightforward design supports quick verification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
555mm Pull Rod 1/2-12UNF Threaded, 0.6kg - Vertex
Take advantage of the combination of secure thread retention, extended reach and low weight for reliable clamping and smoother setups; order the drawbar directly via Metav Werkzeuge or ask our consultants for compatibility advice. Drawbar VDR-NT302-S — 1/2-12UNF thread, 555 mm length (Vertex) A drawbar designed for secure retention in machining and clamping applications, featuring a 1/2-12UNF thread and industrial dimensions for versatile use. Secure 1/2-12UNF thread 555 mm length for extended reach Lightweight 0.6 kg for easy handling Vertex build and industrial SKU VDR-NT302-S Reliable retention for consistent machining results The 1/2-12UNF thread offers a dependable mechanical interface for retention systems, delivering secure clamping that reduces slippage under load. By relying on a standard fine thread, setups are simplified and spindle-to-tool engagement is stable, which supports repeatable machining cycles. This reliability translates into fewer interruptions and a steadier production flow for workshop environments that demand consistent results. Optimised length and weight for handling and reach With a length of 555 mm and a weight of 0.6 kg, the component provides a balanced combination of reach and manageability. The extended length allows access to deeper toolholders or specialised fixtures without compromising control during installation. The low mass reduces handling fatigue during frequent tool changes and helps maintain spindle balance, contributing to improved operational efficiency and reduced set-up times. Compatibility focus to minimise downtime Marked as VDR-NT302-S, the item is prepared for integration where a 1/2-12UNF retention connection is specified. The straightforward mechanical design supports rapid assessment of compatibility with existing toolholding systems, enabling quick replacement or upgrade decisions. For bespoke or unusual tool interfaces, technical consultation is available to confirm fitment and to recommend the best configuration for reduced downtime and sustained precision. Contact Metav Werkzeuge to secure the Vertex drawbar VDR-NT302-S for precise clamping — our team in Emmerich advises on compatibility and supply for your workshop needs Technical data Article number: VDR-NT302-S GTIN: 4061905091070 Brand: Vertex Facts Length: 555 mm Weight: 0.6 kg Thread: 1/2-12UNF Special features eClass: 23309104 Category: Vertex Asset ID: 63972fb8c806fb82109e34dc FAQ What thread does the drawbar use? The VDR-NT302-S uses a 1/2-12UNF thread for retention and secure mounting. What are the dimensions and weight of the product? The drawbar is 555 mm long and weighs 0.6 kg, suitable for extended-reach applications. Is this component compatible with standard toolholders? Compatibility depends on the holder thread; the VDR-NT302-S is intended for systems accepting a 1/2-12UNF retention fitting. Can this item support high-precision setups? Yes, the 1/2-12UNF retention and industrial dimensions make the VDR-NT302-S appropriate for accurate clamping in routine precision work. Which SKU and GTIN identify this item? SKU: VDR-NT302-S GTIN: 4061905091070 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
555mm Pull Rod 1/2-13UNF Thread - Vertex
Take advantage of a combination of precise thread compatibility and a compact overall length for dependable tool retention and stable machining. Benefit from clear identification via the SKU and GTIN and order directly through Metav Werkzeuge or consult our specialists for compatibility checks. Draw bar VDR-NT303-A — 1/2-13UNF thread, 555 mm, Vertex A draw bar VDR-NT303-A designed to secure tooling in conventional machining and toolholding assemblies, offering a standard 1/2-13UNF interface for common spindle fittings 1/2-13UNF thread interface 555 mm overall length 0.9 kg compact mass SKU VDR-NT303-A for quick identification Enhanced process reliability through secure clamping The primary advantage of a correctly specified draw bar lies in consistent retention force and repeatable tool positioning. With its 1/2-13UNF thread and fixed 555 mm length, this component reduces variation at the spindle interface and supports steady machining cycles. Clear specification of the thread type simplifies compatibility checks for machine tool engineers and reduces downtime caused by misfitted components. The standardised thread also enables easier procurement and spares management within a production environment. Balanced mass for handling and vibration control A compact mass of 0.9 kg contributes to manageable handling during tool changes while helping to damp minor vibrations that can amplify at higher spindle speeds. The relatively low weight assists maintenance technicians during frequent interventions and aids in maintaining concentricity when the assembly is clamped. Where runout and surface finish are critical, the inertia characteristics of the fastening element matter; a consistent mass supports predictable machine behaviour without compromising rigidity in the toolholding stack. Practical guidance on installation and compatibility Installation requires matching the 1/2-13UNF thread to the machine’s retention mechanism and verifying the overall 555 mm length suits the toolholder and spindle geometry. For straightforward integration, check the SKU VDR-NT303-A and the GTIN when comparing components to legacy assemblies. Routine inspection should focus on thread condition and straightness; any deformation may affect clamping force. Where uncertainty exists about fitment or interchangeability, reference the machine manufacturer’s spindle specifications or consult technical documentation to confirm tolerances before commissioning. For assured compatibility and fast supply, order the Vertex draw bar via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 for a quick specification check Technical data SKU: VDR-NT303-A GTIN: 4061905092343 Manufacturer: Vertex Dimensions & weight Length: 555 mm Weight: 0.9 kg Thread: 1/2-13UNF Classification & assets ECLASS: 23309104 Category: Vertex Image filename: VDR-R8-S-main.png FAQ What thread does this draw bar use and which spindles is it compatible with? The draw bar uses a 1/2-13UNF thread; compatibility depends on the spindle retention thread standard—confirm that the spindle accepts 1/2-13UNF threads before installation. How long is the draw bar and why does length matter? The overall length is 555 mm; length affects the toolholder engagement and must match the machine’s tool clamping geometry to ensure correct seating and axial position. What is the identification code for ordering and inventory purposes? Order and stock using the SKU VDR-NT303-A; the GTIN 4061905092343 provides an additional global identifier for logistics and procurement. How should the draw bar be inspected during routine maintenance? Inspect thread integrity and straightness; any galling or distortion of the 1/2-13UNF thread or axial bending warrants replacement to maintain clamping reliability. Which manufacturer produces this draw bar? The item is produced by Vertex and labelled under the SKU VDR-NT303-A, enabling traceability to the original toolmaker. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
55mm Adjustable Screw Jack 140–230mm Height, 30 Kg Capacity - Vertex
Take advantage of precise, low-profile height adjustment and a compact, lightweight design to streamline setup and support of light machinery; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. VSJ-250 screw jack — Vertex adjustable height 140–230 mm, 30 kg capacity The VSJ-250 screw jack delivers height-adjustable support for light machinery, fixtures and workshop assemblies, combining compact dimensions with reliable mechanical adjustment. Height-adjustable 140–230 mm range 30 kg maximum load capacity 55 mm base diameter for stable support Lightweight 2.3 kg for easy handling Consistent positioning and measurable performance The VSJ-250 offers a clear, quantifiable benefit for workshop operations: a defined adjustable height 140–230 mm delivering repeatable setup without complicated ancillary equipment. With a rated 30 kg maximum load and a stable 55 mm base diameter, the unit provides dependable vertical support for light machines, jigs and temporary fixtures. The screw mechanism converts minimal rotary input into controlled axial motion, enabling accurate height changes and fine adjustment during alignment procedures. This measurable behaviour reduces setup time and supports consistent production quality. Compact support that improves workflow efficiency Designed for straightforward handling, the lifting device weighs 2.3 kg, which makes repositioning and storage notably easier compared with heavier supports. The compact footprint frees bench and trolley space while maintaining stabilising contact with workpieces. Low moving mass contributes to faster manual adjustments and reduces operator fatigue during repeated tasks. As a result, workflow becomes more efficient and changeovers proceed with less downtime — a practical advantage in environments where flexibility and speed matter. Clear identification and procurement readiness Specification and procurement are simplified by unambiguous identifiers and industry classification: SKU: VSJ-250 and GTIN: 4061905093425 provide precise ordering and inventory traceability, while the ECLASS code facilitates integration into material lists. The technical drawing and detail images included with the product support planning and help verify installation clearances before purchase. These elements assist purchasing teams and maintenance planners in matching the lifting support to the exact application requirements without guesswork. Discuss application options with Metav Werkzeuge for reliable supply of Vertex lifting supports and tailored advice from our Emmerich-based quality team Technical data SKU: VSJ-250 GTIN: 4061905093425 ECLASS: 21044290 Dimensions & capacity Diameter: 55 mm Adjustable height: 140–230 mm Maximum load: 30 kg Weight: 2.3 kg Features & extras Height adjustment by screw mechanism Compact workshop support Technical drawing and detail images available FAQ What is the maximum load the VSJ-250 can support? The VSJ-250 has a maximum load capacity of 30 kg as specified for light machinery and fixture support. How is the height adjusted on the lifting support? Height is adjusted via the integrated screw mechanism, providing a stepless range from 140–230 mm for fine positioning. What footprint does the support require? The support has a base diameter of 55 mm and is designed for a compact footprint suitable for benches and trolleys. Is the unit easy to move and reposition within the workshop? Yes, with a weight of 2.3 kg the unit is lightweight and intended for straightforward handling and relocation. Which identifiers should be used when ordering replacement units? Use SKU: VSJ-250 and GTIN: 4061905093425 to ensure correct ordering and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
55mm Precision Spiro Keyless Drill Chuck 3-16mm, Self-Tightening, Hardened Parts, Right-Hand - RÖHM
Take advantage of the combination of precision operation, continuous self-acting re-tensioning, and hardened wear parts for reliable performance in high-speed drilling and precision applications; order the RÖHM Spiro B16 keyless drill chuck directly via Metav Werkzeuge or consult the team for additional advice. RÖHM Spiro B16 Keyless Drill Chuck — Accuracy version with B16 taper, 3–16 mm clamping range RÖHM Spiro B16 keyless drill chuck designed for precision drilling and compatibility with standard twist drills; suitable for drilling machines and boring mills operating in right-hand rotation Accuracy version for precision work Self-acting continuous re-tensioning Hardened wear parts for extended life B16 taper shank for right-hand rotation Precision clamping for accurate machining results The RÖHM Spiro keyless drill chuck in its accuracy version delivers stable clamping across the 3–16 mm range, ensuring consistent concentricity when handling twist drills and reamers. The chuck’s design focuses on repeatable positioning and minimal runout, which reduces rework and improves hole quality in serial production or one-off precision tasks. Hardened components maintain alignment over prolonged use, preserving measurement-critical results on drilling machinery and boring mills. Built for high-speed operation and secure retention Thanks to self-acting re-tensioning, the chuck keeps a positive clamping force even under centrifugal and thermal stresses encountered at elevated speeds. This automatic re-tensioning, combined with its construction for high speeds, prevents loosening during operation and supports safer machining cycles. The direction-specific design (for right-hand rotation) and robust construction mean reliable performance when stable retention and uninterrupted cycles are essential for productivity. Low-maintenance integration with workshop workflows The B16 taper mounting allows straightforward fitting to compatible spindles, enabling quick changeovers and secure seating for everyday workshop processes. All critical wear parts are hardened, which translates into long service life and fewer interventions for replacement or adjustment. As a keyless solution, the chuck simplifies tool changes for operators and integrates well with existing toolrooms, reducing downtime while maintaining the precision required for demanding drilling and reaming operations. For precision-driven machining tasks, contact Metav Werkzeuge to discuss the RÖHM Spiro B16 keyless drill chuck, confirm compatibility with current machinery and arrange fast delivery or expert advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000832070NW Manufacturer: RÖHM Product: Keyless drill chuck Type: Spiro Version: Accuracy execution Facts Clamping range: 3–16 mm Outer diameter: 55 mm Taper shank: B16 Direction of rotation: Right-hand UID: 4000832070NW Special features Accuracy execution · self-clamping All wear parts hardened Continuous, self-acting re-tensioning Suitable for high speeds and precision work on drilling machines and boring mills With taper shank · for right-hand rotation FAQ What is the clamping range of this chuck? The RÖHM Spiro B16 keyless drill chuck clamps from 3–16 mm, making it suitable for a wide range of twist drills and reamers (Article number 4000832070NW). Which spindle interface is required for mounting? Mounting requires a B16 taper shank; the B16 taper ensures secure seating on compatible spindles for the RÖHM Spiro keyless drill chuck. Is this chuck suitable for high-speed drilling? Yes. The RÖHM Spiro chuck features continuous self-acting re-tensioning and hardened wear parts, which support safe and reliable operation at elevated speeds on drilling machines and boring mills. Does the design support precision drilling tasks? The accuracy execution of the chuck provides improved concentricity and repeatability, making the RÖHM Spiro suitable for precision drilling and finishing operations. Are the wear components designed for long service life? All wear parts in the RÖHM Spiro keyless drill chuck are hardened, which extends service life and reduces the frequency of maintenance interventions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
55mm Toggle Clamp Horizontal Base With Hook, 3.5kN Thrust, 4kN Holding, Zinc Plated - Kukamet
Take advantage of a compact, hook-equipped latch clamp that combines a corrosion-resistant galvanised finish with reliable clamping and holding performance; the result is secure fixture retention and improved cycle reliability. Order directly via Metav Werkzeuge or consult the technical team for installation guidance. Kukamet 411 latch clamp — horizontal-foot toggle clamp with hook and galvanised finish The 411 latch clamp is a lever-operated closure clamp designed for horizontal-foot mounting in workshop jigs and light industrial fixtures. Horizontal-foot mounting for stable installation Galvanised finish for corrosion resistance Hook-equipped design for secure latching Holding force up to 4,000 N Consistent clamping and measurable performance The 411 latch clamp delivers defined mechanical values: a closing force of 3,500 N and a holding force of 4,000 N, which translate into reliable repeatability in production processes. The distinction between the two figures is important: closing force refers to the applied clamp pressure during engagement, while holding force indicates the sustained retention capacity under load. For production planners and fixture designers this means fewer clamp-related stoppages and a measurable improvement in process stability. Robust materials and mounting that suit workshop demands Constructed with a galvanised surface treatment and a horizontal foot for secure attachment, this toggle-style clamp resists common workshop conditions and integrates easily into existing fixture plates. The hook-equipped form gives positive latching without additional parts, and the specified thread length 55 mm allows reliable anchoring into plates or brackets. With a mass of 0.86 kg, the component is light enough for compact jigs while remaining solid under repeated cycles. Practical integration and application benefits The lever mechanism provides fast actuation and repeatable closing for assembly, sheet-metal holding, and simple welding jigs. As a toggle clamp, the design reduces cycle time by enabling quick engagement and rapid release, helping to increase throughput in small-batch manufacturing and repair work. The combination of galvanised finish, clear mechanical figures and a compact footprint supports predictable maintenance intervals and straightforward replacement planning. For procurement or technical consultation on the Kukamet 411 latch clamp, contact Metav Werkzeuge to discuss fixture integration and delivery from Emmerich. Technical Data SKU: 411-4 GTIN: 8680731504187 Category: Spanner / latch clamp eClass: 21041718 ETIM: EC011973 Facts Closing force: 3,500 N Holding force: 4,000 N Weight: 0.86 kg Thread length: 55 mm Special features Galvanised finish Horizontal-foot mounting Hook-equipped Lever-operated toggle clamp FAQ What do the closing and holding force values mean for fixture design? The closing force (3,500 N) indicates the force applied during engagement; the holding force (4,000 N) specifies the clamp’s sustained retention. These figures for the Kukamet 411 latch clamp help in selecting suitable clamps for expected loads. Can the clamp be used in corrosive environments? The galvanised surface treatment of the Kukamet 411 provides increased corrosion resistance suitable for general workshop environments; aggressive or marine conditions require additional protection strategies. Is the clamp suitable for retrofitting into existing jigs? Yes, the horizontal-foot mounting and a thread length of 55 mm enable straightforward integration into plates and brackets commonly used in fixtures when using the Kukamet 411 latch clamp. Which applications are best suited to this type of clamp? Toggle-style closure clamps like the 411 are well suited to assembly, light fabrication, welding jigs and repeated production cycles where quick actuation and repeatable retention are required. What maintenance is recommended to ensure consistent performance? Regular inspection of the galvanised surface and mechanical linkage, lubrication of pivot points and verification of fastener torque will sustain the operation of the Kukamet 411 latch clamp over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
55W Dust-Protected Halogen Lamp, IP67 Light/IP20 Arm, 110/220/380/24V, 1.8m Cable - Vertex
Reliable inspection lighting with a dust‑protected lamp head, IP67 protection and a flexible single‑joint arm delivers precise illumination for inspection and workshop tasks. Supplied with a 1.8 m cable and supporting multi‑voltage operation, the unit adapts to varied installations. Order the VHL-300S halogen lamp directly via Metav Werkzeuge or ask our consultants if needed VHL-300S halogen inspection lamp — dust‑protected head, single‑joint arm (Vertex) The VHL-300S is a dust‑protected halogen inspection lamp designed for workshop and inspection stations, featuring a single‑joint adjustable arm and a robust, IP‑rated lamp head suitable for precise visual inspection work. IP67-rated lamp head Single-joint adjustable arm Multi-voltage operation 24–380 V Includes 1.8 m connection cable Precise, consistent illumination for inspection tasks The lamp provides steady, contrast‑rich light thanks to its halogen source and compatibility with a 55 W bulb, which together ensure reliable colour rendering and shadow control for visual inspection and assembly work. This consistent light output supports accurate measurement and defect detection on components, reducing the need for repeated checks. The combination of focused illumination and a compact head makes the unit suitable for workbenches and measuring stations where clear, uncoloured light improves judgment and process reliability. Built to withstand demanding workshop conditions The lamp head is IP67 rated while the arm carries an IP20 classification, giving a clear separation of protection levels between the light module and the support structure. IP67 indicates a dust‑tight head with high resistance to ingress, making the fitting more resilient in dusty production areas; the arm’s IP20 rating reflects standard mechanical protection suitable for indoor workshop environments. At 2.3 kg, the assembly provides stable positioning without excessive bulk, helping to maintain alignment during inspection cycles while remaining manageable for repositioning. Flexible installation and practical connectivity Equipped for multi‑voltage supply (110 / 220 / 380 / 24 V as required) and delivered with a 1.8 m cable, the unit adapts to varied electrical setups without extensive rewiring, simplifying integration into existing workstations. The single‑joint arm enables rapid repositioning and secure local adjustment, providing ergonomic access to the illuminated area. These practical attributes reduce downtime and support a dependable lighting arrangement across different production cells and measuring benches, delivering immediate operational benefits for workshop teams For tailored procurement and technical advice from Metav Werkzeuge — including voltage configuration and delivery from our Emmerich warehouse — contact our sales consultants to secure Vertex inspection lighting suited to specific inspection workflows Technical Data SKU: VHL-300S GTIN: 4061905089084 Product type: Halogen inspection lamp Dust protection: yes Facts Weight: 2.3 kg Nominal bulb: 55 W Voltage options: 110 / 220 / 380 / 24 V Cable length: 1.8 m Arm joints: 1 Special features Lamp head IP67, arm IP20 Single-joint adjustable arm Multi-voltage compatibility Includes 1.8 m connection cable Dust-protected design FAQ What environments is this lamp suitable for? The VHL-300S halogen inspection lamp is intended for workshop and inspection stations; the IP67 lamp head provides strong dust protection while the arm is designed for indoor workshop use. What does an IP67 lamp head mean in practice? IP67 indicates the lamp head is dust‑tight and highly protected against temporary immersion; in the VHL-300S this enhances durability where assemblies are exposed to dust or splashing. Which voltages are supported by the lamp? The unit supports multiple supply options — 110 / 220 / 380 / 24 V — allowing adaptation to various electrical installations without complex conversion. Is a bulb and cable included with the lamp? The VHL-300S is specified for a 55 W halogen bulb and is supplied with a 1.8 m cable, simplifying immediate installation. How easy is the lamp to position during inspection work? The single‑joint arm allows quick, stable repositioning of the lamp head for focused illumination during inspection and assembly tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
56,8mm Bohrfutter, Ø3-16mm, SK40-APU16, selbstspannend, DIN 69871A - Vertex
Das selbstspannende Bohrfutter APU, selbstspannend überzeugt durch präzise Aufnahme und robuste Normkonformität; die Kombination aus SK40-APU16 Aufnahme, DIN 69871A Schnittstelle und einem Durchmesser von 56,8 mm sorgt für zuverlässige Wiederholgenauigkeit in der Fertigung. Bestellen Sie das Gerät direkt über Metav oder nehmen Sie unsere technische Beratung in Anspruch. Bohrfutter APU, selbstspannend von Vertex Das Bohrfutter APU, selbstspannend bietet eine kompakte, hochpräzise Aufnahme für Werkzeugmaschinen mit SK40 Taper und ist speziell für Spannzangen von SK40-APU16 konzipiert. Kompatibel mit SK40-APU16 Aufnahmen Normkonform nach DIN 69871A Geeignet für Messschieber Ø3-16mm Robustes Design, Gewicht nur 2,4 kg Präzise Aufnahme für wiederholgenaue Fertigung Die selbstspannende Mechanik reduziert Werkzeugwechselzeiten und gewährleistet konstante Zentrierung bei Serienfertigung. Durch die SK40-APU16 Schnittstelle wird eine formschlüssige Verbindung zur Spindel gewährleistet, die Vibrationen minimiert und die Werkzeugstandzeit erhöht. Anwender profitieren von geringerer Nachbearbeitung und stabileren Toleranzen. Robuste Bauform und einfache Handhabung Das Gehäuse ist auf Dauerbetrieb ausgelegt und unterstützt einen sicheren Halt bei hohen Schnittkräften. Das moderate Gewicht von 2,4 kg erleichtert Handling bei Werkzeugwechsel und Montage, ohne die Stabilität zu beeinträchtigen. Die kompakte Abmessung mit Durchmesser 56,8 mm ermöglicht den Einsatz auch in beengten Aufnahmen. Einsatzbereiche und Zielgruppe Das Produkt richtet sich an Feinmechaniker, Werkzeugbauer und Produktionsbetriebe, die präzise Bohr- und Fräsaufgaben mit schneller Rüstzeit ausführen. Besonders geeignet ist das System für Maschinen mit DIN‑Normaufnahmen, wo Wiederholgenauigkeit und Vibrationsarmut im Vordergrund stehen. Technische Zuverlässigkeit im Alltag Die Normkonformität DIN 69871A bietet Planbarkeit für Retrofit und Ersatzteilmanagement. Der Messschieberbereich Ø3-16mm erlaubt eine flexiblere Werkzeugauswahl, wodurch sich Einspannvarianten vereinfachen. Damit werden Stillstandszeiten reduziert und Fertigungsprozesse effizienter gestaltet. Sichern Sie sich die Präzision von Vertex mit dem Bohrfutter APU, selbstspannend über Metav – für technische Beratung schreiben Sie an info@metav-werkzeuge.com oder rufen Sie an unter +49 2822 7131930. Produktmerkmale Artikelnummer: SK-515 Marke: Vertex Bezeichnung: Bohrfutter APU, selbstspannend Norm: DIN 69871A Fakten Gewicht: 2,4 kg Durchmesser: 56,8 mm Geeignet für Messschieber: Ø3-16mm Besonderheiten Spannzangen Typ: SK40-APU16 ECLASS: 21020490 (Maschinenelemente) ETIM: EC002125 (Werkzeugaufnahme) SKU: SK-515 FAQ Welche Aufnahme hat das Bohrfutter? Das Bohrfutter von Vertex verfügt über eine SK40-APU16 Aufnahme und ist für Anwendungen mit SK40 Spindel konzipiert. Ist das Gerät normkonform für automatische Werkzeugwechsler? Ja, das Bohrfutter erfüllt die Norm DIN 69871A und ist damit für viele automatisierte Spindelsysteme geeignet. Für welchen Messbereich ist das Bohrfutter ausgelegt? Das System ist kompatibel mit Messschiebern und Spannmitteln im Bereich Ø3-16mm, was flexible Werkzeugwahl ermöglicht. Welche Vorteile bringt die selbstspannende Funktion? Die selbstspannende Funktion sorgt für schnelle Rüstzeiten, konstante Zentrierung und reduzierte Vibrationen bei Serienfertigung. Hersteller: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
56.8mm Self‑Locking APU Collet Chuck SK50‑APU16, DIN 69871A - Vertex
Take advantage of a robust combination of SK50 taper compatibility, self-tightening APU clamping and a precise Ø3–16 mm clamping range for reliable machining performance. Order the chuck directly via Metav Werkzeuge or ask our consultants for application advice. Vertex SK-516 drill chuck (self-tightening APU, SK50 taper, Ø3–16 mm) The SK-516 is a self-tightening APU drill chuck designed for SK50 spindle interfaces, offering secure clamping for small to medium diameters in general workshop and production settings. SK50 taper with APU16 collet system Self-tightening clamping action Clamping range Ø3–16 mm DIN 69871A spindle interface Reliable clamping for consistent machining results The self-tightening chuck provides consistent axial and radial clamping which reduces tool slippage under load. Built to interface with the DIN 69871A spindle standard, the unit ensures repeatable seating and alignment on machines equipped with an SK50 taper. The chuck’s design promotes secure holding of round shanks in the Ø3–16 mm range, translating technical clamping data into measurable gains in process stability and fewer rejects during drilling and light reaming operations. Compatibility and integration with existing machine tools Featuring the SK50-APU16 collet interface, the chuck integrates directly with machines using the SK50 taper without the need for adapter sleeves. The combination of the SK taper and APU collet format allows straightforward installation and removal while maintaining concentricity requirements for many production tasks. The outer dimensions and mounting standard support seamless replacement of similar spindle-mounted clamping systems, making the chuck suitable for retrofit or spare-part stocking in maintenance operations. Practical benefits for workshop efficiency The mechanical self-tightening function reduces setup time by simplifying clamping procedures and minimising auxiliary tightening operations. Weight and balance have been considered during development to limit spindle load while enabling fast tool changes; the unit’s moderate mass contributes to stable rotation without excessive inertia. These features together deliver a pragmatic improvement in throughput, making routine tasks quicker and less prone to human error. Maintenance and service considerations The chuck has been designed for easy inspection and upkeep: straightforward access to the collet system allows routine cleaning and lubrication to be performed quickly, extending component life and preserving clamping accuracy. Where replacement collets are required, the APU16 format is a commonly available standard, simplifying logistics for spare parts and reducing downtime in production environments. Contact Metav Werkzeuge to discuss SK-516 suitability for existing SK50 spindles and to request detailed technical advice from our specialists Technical data Article number: SK-516 GTIN: 4061905095610 Manufacturer: Vertex Type: Drill chuck, APU self-tightening Standard: DIN 69871A Dimensions & weight Outer diameter: 56.8 mm Weight: 3.9 kg Clamping range: Ø3–16 mm Collet type: SK50-APU16 Special features & compatibility Self-tightening APU clamping mechanism Interface: SK50 taper Suitable for machines with DIN 69871A spindle taper SKU: SK-516 FAQ What clamping range does the chuck cover? The chuck provides a clamping range of Ø3–16 mm, suitable for small to medium-diameter round shanks. Is the SK-516 compatible with SK50 spindles? Yes, the Vertex SK-516 is designed for SK50 spindle interfaces and conforms to the DIN 69871A installation standard. Which collet type is required for this chuck? The unit uses the APU16 collet format; compatibility is indicated by the SK50-APU16 specification. How heavy is the chuck and does weight affect spindle balance? The chuck weighs 3.9 kg; its mass was considered in the design to maintain a balance between stability and manageable spindle load. Can the chuck be maintained on-site by workshop staff? Routine maintenance such as cleaning and lubrication is straightforward and can be carried out by workshop personnel familiar with collet systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
56mm 10mm Reducing Sleeve Hardened And Ground For Drill Bar Holder Form E 2, 10mm Bore - TECWERK
The hardened, ground construction together with a true 10 mm bore and a 56 mm clamping length ensures repeatable concentricity and reduced runout for secure drill rod clamping; the part is made for use with Form E2 drill rod holders and is ideal where stable tool retention matters. Order the reduction sleeve directly via Metav Werkzeuge or ask the consultants for application advice. Reduction sleeve Form 1 — 10 mm bore, 32 mm outer diameter (TECWERK) A Reduction sleeve Form 1 for precise clamping of drill rods in Form E2 holders, hardened and ground for workshop and light production use. Hardened and ground precision finish Compatible with Form E2 drill rod holders 10 mm inner bore for standard drill rods 56 mm clamping length, 32 mm outer diameter Stable clamping for consistent machining results The hardened and ground construction provides a cylindric, wear-resistant contact surface that maintains alignment under load. With a 10 mm bore and a 32 mm outer diameter, the sleeve is engineered to keep the tool concentric in the spindle or holder, which reduces wobble and vibration during rotation. Reduced vibration directly translates to improved surface finish and longer tool life, while the defined 56 mm clamping length ensures sufficient engagement to resist axial loads. Where machining tolerances matter, the consistent geometry of this adapter sleeve supports reliable repeatability. Designed to integrate with Form E2 holders for minimum setup time Compatibility with Form E2 drill rod holders allows quick retrofitting and interchangeability across existing clamping systems. The adapter sleeve acts as a precise interface between a holder and a smaller-diameter drill rod, eliminating the need for custom shims or frequent rebalancing. By preserving concentricity and limiting runout, the component helps to lower scrap rates and reduces downtime for tool changes. The simple geometry makes inspection and replacement straightforward, supporting steady production workflows. Low-maintenance durability for workshop and light industrial use The ground finish minimises seating wear and the hardened surface extends service intervals, making the component suitable for repetitive drilling tasks. The compact design requires no additional calibration beyond standard assembly practice; periodic inspection for wear is sufficient to ensure continued performance. This reduction bush functions as a robust, low-maintenance adapter that keeps spindle behaviour predictable and supports both planned and ad-hoc machining operations. For precision clamping with the TECWERK reduction sleeve, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data Article number: 2000834213NW Product type: Reduction sleeve Manufacturer: TECWERK Packaging unit: 1 Core data Inner bore (d1): 10 mm Outer diameter (d): 32 mm Clamping length (L): 56 mm Form: 1 Special features Hardened and ground For drill rod holder Form E2 FAQ Which holders are compatible with this reduction sleeve? The sleeve is designed for use with Form E2 drill rod holders and matches the dimensional requirements for that system. What are the main dimensions to check before ordering? Key dimensions: inner bore 10 mm, outer diameter 32 mm, clamping length 56 mm; identify the item by SKU 2000834213NW. Is the sleeve ready for immediate use after installation? Yes — the hardened and ground finish means the sleeve is ready for installation without additional machining or finishing. Can the component withstand frequent tool changes in a workshop environment? The hardened surface and ground geometry provide durability suitable for repetitive use in workshop and light production settings. How is the item identified for procurement and inventory? Order or reference the reduction sleeve by its SKU 2000834213NW and product type (reduction sleeve, Form 1) for precise identification. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
56mm 20mm Bore Reducer Sleeve Form 2, Hardened And Ground - TECWERK
Benefit from a hardened and ground finish together with precise dimensions — 20 mm bore, 32 mm outer diameter and 56 mm clamping length — for reliable centring and repeatable clamping in Form E 2 systems; order directly via Metav Werkzeuge or consult our specialists for application advice. Reduction sleeve Form 2 — 20 mm bore, 32 mm outer diameter (TECWERK) The reduction sleeve Form 2 is a compact adaptor for adapting drill rod diameters within Form E 2 toolholders, hardened and ground for precision clamping in production and workshop environments Hardened and ground for precision Bore diameter 20 mm Outer diameter 32 mm Clamping length 56 mm For drill rod holders Form E 2 Consistent concentricity for high-precision machining The hardened and ground finish ensures low runout and consistent concentricity, which translates into stable drilling and repeatable results on serial parts. With a nominal bore of 20 mm and an outer diameter of 32 mm, the sleeve provides a snug interface between drill rod and holder, reducing vibration and tool deflection. For machine shops and production lines where tight tolerances matter, this kind of precise adaptor reduces rework and helps to maintain process capability. Built for durability and repeatability in production use Surface treatment and finishing quality are decisive for service life in tooling components. The hardened-and-ground surface improves wear resistance and maintains clamping geometry over many cycles, supporting continuous operation with fewer tool changes. The measured clamping length of 56 mm contributes to secure retention of the drill rod and helps preserve cutting-edge alignment across repeated insertions, increasing overall toolholder reliability. Fast integration into existing Form E 2 toolholding systems Designed specifically for use with Form E 2 drill rod holders, the sleeve allows straightforward interchangeability without modification of existing holders. The clear dimensional match — 20 mm bore, 32 mm outer diameter, 56 mm clamping length — simplifies inventory management and ensures compatibility across batches of tooling. The compact design supports efficient workshop workflows and quick changeovers while preserving the original holder’s performance characteristics. Practical advantages for workshops and industrial users In everyday workshop and industrial settings the adaptor reduces setup time and improves process stability: fewer adjustments are required and inspection intervals can be extended thanks to predictable behaviour under load. The combination of accurate dimensions and a hard, ground finish yields tangible productivity benefits, notably in small-batch production and routine maintenance tasks where reproducibility and operational confidence are priorities. For reliable, precision clamping with the TECWERK reduction sleeve, contact Metav Werkzeuge for technical guidance or to arrange a purchase at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000834216NW Product: Reduction sleeve Form 2, bore Ø20 mm, OD 32 mm, clamping L 56 mm, TECWERK Core dimensions Bore diameter: 20 mm Outer diameter: 32 mm Clamping length: 56 mm Form: 2 Packaging unit: 1 Special features Hardened and ground For drill rod holders Form E 2 FAQ Which toolholders is this sleeve compatible with? The reduction sleeve is intended for use with Form E 2 drill rod holders and is dimensioned to match that system. What are the precise dimensions of the component? The sleeve features a 20 mm bore, 32 mm outer diameter and a 56 mm clamping length as specified for Form 2 adaptors. Does the sleeve improve runout and repeatability? Yes, the hardened and ground finish reduces runout and supports repeatable concentric clamping under repeated use. How is the sleeve fitted into the toolholder? The sleeve is inserted into a Form E 2 holder and used to adapt the holder to the 20 mm drill rod size; ensure correct seating and clamping procedures according to the holder’s instructions. Is the base material specified for the sleeve? The supplied data specify a hardened and ground finish but do not name the base material; handling and selection should proceed on that basis. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com