Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
58mm Clamping Tool Set M14 x 16 With 24 Clamping Bolts 6 T-Nut Stones 6 Nuts - AMF
Take advantage of a complete, 58-piece kit designed for fast, repeatable clamping in M14 workstations; the combination of comprehensive contents and organised storage ensures shorter setup times and fewer missing parts on the shop floor. Order the set via Metav Werkzeuge or contact the consultants for tailored advice. Clamping tool assortment M14×16, 58-piece – AMF clamping kit with M14 x 16 T-slot compatibility Clamping tool assortment M14×16, 58-piece provides a ready-to-use collection of clamping hardware for machine tables and fixtures, optimised for metric T-slots and workshop production. Complete 58-piece kit for quick setups Includes 24 clamping bolts and T-slot nuts Compatible with M14 x 16 T-slots and fixtures Faster set-up and consistent clamping for production The kit delivers an immediate productivity uplift through an organised selection of clamping elements that reduces changeover times. With 24 clamping bolts and a variety of nuts and extensions included, the assortment enables consistent clamp force across multiple workpieces, which supports reliable machining tolerances. The use of standard M14 x 16 T-slot components simplifies integration into existing fixtures and machine tables; for purchasers unfamiliar with T-slot terminology, these are the common recessed tracks on machine beds that accept the kit’s nuts and bolts to secure workpieces firmly and repeatably. Organised contents minimise downtime and errors A clear benefit of the set is the integrated sorting case, which keeps the individual parts visible and accessible during tool changes. The assortment groups components—such as bolts, T-slot nuts, extension nuts, step clamps and clamp blocks—so that operators can select the right item without searching through mixed boxes. This organisational advantage not only reduces interruptions during shift handovers but also supports traceability and inventory control in busy workshops, helping maintain a smoother production flow and fewer lost components. Versatile components for workshop reliability The selection of stepped clamp irons and multiple nut types in this assortment supports a range of clamping geometries, from low-profile holds to taller set-ups requiring extensions. The variety supplied makes the kit suitable for both repetitive series production and flexible job-shop work, improving set-up flexibility while keeping fixture complexity low. Specifying a single, comprehensive kit removes the need for multiple small orders and ensures that compatible, metric-threaded parts are always at hand, which contributes to steadier lead times and fewer emergency purchases. For procurement or technical advice on the AMF clamping tool assortment, contact Metav Werkzeuge for a tailored recommendation and assured supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832754NW SKU: 4000832754NW Name: Clamping tool assortment M14×16, 58-piece Product type: Clamping tool assortment Brand: AMF Facts Contents: 58 pieces T-slot size: M14 x 16 Packaging unit: 1 Special features Metric threads 24 clamping bolts 6 T-slot nuts 6 nuts 4 extension nuts 12 step clamp irons 6 clamping blocks Sorting case FAQ What components are included in the clamping tool assortment? The AMF clamping tool assortment M14×16, 58-piece contains 24 clamping bolts, 6 T-slot nuts, 6 nuts, 4 extension nuts, 12 step clamp irons, 6 clamping blocks and a sorting case (SKU 4000832754NW). Is this kit compatible with standard machine T-slots? Yes, the set is designed for M14 x 16 T-slot systems and fits machine tables and fixture plates that use that metric T-slot specification. Can the assortment support different clamp heights and setups? The included step clamp irons and extension nuts allow for a range of clamp heights and geometries, making the kit adaptable to various workpiece profiles. Is the assortment suitable for series production and one-off jobs? The organised contents and variety of clamping elements make the kit suitable for both repetitive production and flexible job-shop environments, supporting fast changeovers and consistent clamping. How does the sorting case improve workshop efficiency? The sorting case keeps items grouped and visible, reducing search time and the risk of missing parts during fixture changes; this supports faster set-up and better inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Combination Arbor With 32mm Clamping Bore, DIN 69871 Form AD/B, 60mm Length - TECWERK
Take advantage of a secure, standardised tool-holding solution that combines DIN 69871 compatibility with a 32 mm clamping diameter for reliable concentricity and repeatable set-ups; the case-hardened, ground finish adds wear resistance for continuous operation. Order the TECWERK combination milling arbor directly via Metav Werkzeuge or consult our specialists for application advice. Combination milling arbor DIN 69871 Form AD/B – SK40, clamping Ø 32 mm (TECWERK) The Combination milling arbor DIN 69871 Form AD/B, designed for SK40 spindles, secures milling cutters with longitudinal or transverse slots and supports precision machining in workshop and production environments. Steep taper DIN 69871 Form AD/B Clamping Ø 32 mm for slot-type cutters Case-hardened and precision-ground Compatible with SK40 spindles Secure, standardised holding for precision milling The combination arbor is built to the DIN 69871 specification, delivering a steep taper interface that ensures repeatable seating and minimal runout when used with compatible toolholders. Its design is aimed at stable torque transmission for slot-mounted milling cutters, so concentricity and tool life are improved compared with non-standard adaptors. The clamping diameter 32 mm provides a firm mechanical engagement for cutters with either longitudinal or transverse slots, making the arbor a dependable choice for tasks that demand dimensional accuracy and consistent surface finish. Clear mechanical fit reduces rework and enhances process reliability. Robust surface treatment for extended service life Manufactured case-hardened and ground, the arbor benefits from a hardened working surface that resists wear under repetitive clamping cycles and abrasive machining conditions. The hardened layer increases the component's service life while the ground finish guarantees a precise seating surface, supporting stable axial and radial positioning. With a projection of A = 60 mm and a working length L = 24 mm, the geometry supplies sufficient reach for many cutter types without excessive overhang, reducing vibration and the resulting tool wear. This combination of surface treatment and dimensional control helps lower maintenance intervals and limits unplanned downtime. Versatile compatibility for workshop and CNC operations Conformity to DIN 69871 Form AD/B and the SK40 connection make this arbor suitable for a broad range of milling machines, from manual mills to CNC machining centres that accept the SK40 interface. The external diameter of 58 mm and the standardised taper ensure interchangeability between machines and toolholders, simplifying tool management and spares provisioning. The arbor accepts cutters with longitudinal or transverse keyways, enabling flexibility across milling applications and allowing workshops to standardise on a single holder type for multiple cutter families. The result is faster set-up times and smoother production workflows. Contact Metav Werkzeuge for application-specific guidance on the TECWERK combination milling arbor and fast delivery from our Emmerich warehouse: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000833801NW Product: Combination milling arbor, DIN 69871 Form AD/B, SK40 Manufacturer: TECWERK Facts Clamping diameter: 32 mm Outer diameter D: 58 mm Projection A: 60 mm Length L: 24 mm Standard: DIN 69871 Form AD/B Special features Steep taper DIN 69871 Form AD/B For milling cutters with longitudinal or transverse slot Case-hardened and ground Suitable for SK40 spindles FAQ What does DIN 69871 Form AD/B indicate for this arbor? DIN 69871 Form AD/B denotes a standardised steep taper interface; the combination milling arbor is manufactured to this norm to guarantee correct seating and interchangeability with SK40 toolholders and spindles. Which cutter types can be fitted to the arbor? The TECWERK combination milling arbor accepts milling cutters that have either a longitudinal or a transverse slot; the clamping diameter 32 mm secures cutters designed for slot clamping. How does the case-hardening benefit workshop use? Case-hardening increases surface wear resistance on the arbor, so the seating surface and clamping zones retain dimensional stability over many cycles, which prolongs service life and lowers maintenance needs. Is the arbor suitable for CNC machining centres with SK40 spindles? Yes, the arbor is compatible with SK40 spindles and is intended for both CNC machining centres and manual mills that accept the DIN 69871 Form AD/B taper. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
58mm Cross Groove Adapter Milling Arbor HSK-A63 With 27mm Clamping, Hollow Shank DIN 69893 Form A - TECWERK
Combining a DIN 69893 Form A hollow-shank taper with an enlarged collar and front-face coolant channels delivers improved stability and chip evacuation for consistent milling accuracy; order directly via Metav Werkzeuge or ask their consultants for specification support. Side-slot mounting arbor DIN 69893 Form A, HSK-A63 by TECWERK — 58 mm body, 27 mm clamping A Side-slot mounting arbor DIN 69893 Form A engineered to hold cutter heads and side-slot cutters according to DIN 1880, offering a robust HSK-A63 interface for milling applications. Hollow shank taper DIN 69893 Form A Front coolant channel drillings Enlarged collar diameter for stability Increased process stability through geometry and mass The arbor is designed with an enlarged collar diameter and substantial body mass to reduce vibration and improve tool life during interrupted cuts. This geometry increases clamping rigidity when fitted into an HSK-A63 spindle, resulting in steadier cutting forces and more consistent surface finish. The combination of stable support and precise concentricity makes this toolholder suited to demanding milling where minimal runout is critical. Better coolant delivery and chip control for longer tool life Additional coolant channels drilled into the front face direct cutting fluid close to the cutting edges, improving lubrication and chip evacuation at the point of contact. For operations using cutter heads or side-slot cutters, efficient cooling reduces thermal load and helps prevent built-up edge, which in turn extends insert and cutter life. Explained simply: targeted cooling keeps cutting geometry stable, which preserves tolerances and lowers rework rates. Simple compatibility and safe clamping for production use Built to DIN 69893 Form A with a hollow shank taper, the arbor accepts standard HSK toolholding practice while enabling swift tool changes and reliable torque transmission. The toolholder is intended for cutter heads and cutters with the side-slot specification DIN 1880, so adapters or bespoke fixtures are not required in many workshop setups. This compatibility supports streamlined tool management and reduces setup complexity on CNC milling centres. For tailored advice on integrating this TECWERK HSK arbor into a specific machining cell or to discuss volume availability, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — the Metav team will recommend the right specification for precision and production continuity. Technical data Article number: 2000833879NW Manufacturer: TECWERK Product type: Side-slot mounting arbor Facts Norm: DIN 69893 Form A Body diameter D: 58 mm Clamping Ø d: 27 mm A (length): 60 mm L1: 21 mm Interface: HSK-A63 Special features Enlarged collar diameter for improved stability Hollow shank taper according to DIN 69893 Form A Additional coolant channel drillings at the front face For cutter heads and side-slot cutters to DIN 1880 FAQ What spindle interface does this arbor use? The arbor uses an HSK-A63 interface and is manufactured to DIN 69893 Form A for compatibility with HSK-A63 spindles. Which cutter types can be mounted on this arbor? It accepts cutter heads and side-slot cutters that conform to DIN 1880, enabling direct mounting without custom adaptors in many setups. How do the coolant channels affect machining performance? Front-face coolant channels deliver fluid close to the cutting zone, improving lubrication, chip evacuation and thermal control, which helps maintain tool geometry and prolong tool life. Is this arbor suitable for heavy interrupted cuts? The enlarged collar diameter and robust body design increase clamping rigidity and vibration damping, making the arbor well suited to demanding milling operations. Can the arbor be used in automated tool-change systems? Yes; the hollow shank taper and HSK-A63 interface are compatible with automated tool-change systems that accept DIN 69893 Form A toolholders. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
58mm Cross-Slot Arbor With 27mm Clamping Diameter, DIN 69871 AD/B, Internal Coolant - TECWERK
High-precision machining benefits from the combination of a DIN 69871 Form AD/B SK40 taper, central coolant supply and resealable collar channels, which together secure cutter seating, improve thermal control and extend tool life. Order the TECWERK side‑slot arbour directly via Metav Werkzeuge or ask our consultants if needed. TECWERK side‑slot arbour DIN 69871 AD/B — SK40, central coolant TECWERK side‑slot arbour engineered for mounting cross‑slot cutter heads and milling cutters on SK40 spindles in CNC and toolroom applications. DIN 69871 Form AD/B SK40 taper Central coolant feed and face outlets Resealable coolant channels at collar For DIN 1880 cross‑slot cutter heads Accurate taper and repeatable seating for reliable production The DIN 69871 Form AD/B taper, realised in a standard SK40 shank, provides a rigid mechanical interface that reduces runout and enhances repeatability during prolonged series work. By focusing on a mechanically stable connection, the arbour minimises vibration and tool deflection, which translates into improved surface finish and consistent part tolerances. Such stability is particularly relevant for precision milling tasks in medium‑volume production where fixture reliability directly affects throughput and scrap rates. Integrated coolant routing to protect tools and increase uptime Equipped with a central coolant supply, resealable coolant channels at the collar and additional outlet holes at the face, the arbor ensures targeted coolant delivery to the cutting zone. This configuration promotes effective chip evacuation and thermal management, lowering the risk of workpiece distortion and premature tool wear. The ability to seal and re‑open collar channels allows for flexible maintenance without dismantling the machine, enhancing operational availability and reducing unplanned downtime. Direct compatibility and practical workshop fitment Designed for the reception of cutter heads and milling cutters with a cross‑slot to DIN 1880, the arbour matches common tooling standards while offering clear dimensional data: D 58 mm, clamping diameter 27 mm, A 40 mm and L1 21 mm. These measurements facilitate straightforward integration into existing tool sets and adapters for SK40 spindles. The enlarged collar diameter improves flange contact and concentricity, making the component suitable for toolrooms and production shops seeking both adaptability and robust performance. Choose the TECWERK arbour for coolant‑fed milling applications and contact Metav Werkzeuge in Emmerich for precise specification support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000833818NW Brand: TECWERK Product type: Side‑slot arbour (translated) Standard: DIN 69871 Form AD/B Facts Diameter D: 58 mm Clamping diameter: 27 mm A: 40 mm L1: 21 mm Norm reference: DIN 69871 Special features Enlarged collar diameter Steep taper to DIN 69871 Form AD/B Central coolant supply with face outlets Resealable coolant channels at the collar Additional coolant holes on the face For mounting DIN 1880 cross‑slot cutter heads FAQ What taper and shank standard does this arbour use? The arbour is specified to DIN 69871 Form AD/B and fitted with an SK40 shank for direct mounting in compatible spindles. Is the arbour supplied with coolant capability? Yes; the TECWERK arbour includes a central coolant feed, resealable collar channels and extra face outlets to ensure effective coolant delivery to the cutting zone. Which cutter heads can be mounted on this arbour? Designed to accept cutter heads and milling cutters with a cross‑slot to DIN 1880, the arbour secures these tools via the specified clamping diameter of 27 mm. What are the key dimensions to check for machine compatibility? Important dimensions are D 58 mm, clamping diameter 27 mm, A 40 mm and L1 21 mm; the article number is 2000833818NW for precise reference. Is this arbour suitable for production environments requiring high repeatability? The combination of DIN 69871 taper seating, enlarged collar contact and controlled coolant routing makes the component suitable for workshops and production lines where repeatability and tool life are priorities. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
58mm Thread Cutting Holder Synchronised M3–M10 With Coolant Feed, DIN 1835 B+E - TECWERK
Take advantage of the combination of precise pitch compensation, a Weldon shank DIN 1835 B+E and through-tool coolant supply for reliable synchronised tapping on CNC machines; the chuck’s ±0.5 mm length compensation and high run-out accuracy support consistent thread quality. Order via Metav Werkzeuge or consult the Metav team for application matching. Synchronising tapping chuck DIN 1835 B+E M3–M10 — Weldon shank and coolant feed (TECWERK) The Synchronising tapping chuck DIN 1835 B+E M3–M10 is a synchronised thread-cutting holder for CNC machines with synchronised tapping spindles, designed to compensate pitch differences between the tap and spindle while enabling through-tool cooling Weldon shank DIN 1835 B+E for secure mounting Coolant supply port for through-tool cooling Compensates synchronisation errors ±0.5 mm Suitable for right and left threads M3–M10 Precision where synchronization matters This synchronising tapping chuck is engineered to correct small pitch mismatches between the tap and the machine spindle, which reduces thread distortion and rejects. The integrated length compensation of ±0.5 mm allows the holder to absorb minor axial deviations under compression and tension, preserving cutting geometry. Combined with the high run-out accuracy, this feature ensures repeatable, high-quality threads across production runs and supports tighter process control on CNC threading operations. Through-coolant and clamping that improve cycle reliability The inclusion of a coolant supply makes continuous chip evacuation and tool cooling possible, which prolongs tool life and maintains surface finish on smaller threads such as M3–M10. The Weldon shank DIN 1835 B+E provides a robust interface for heavy-duty operation, while the design’s high clamping force—achieved through the threaded tap collet with integrated square—secures the tap against axial forces. These attributes together reduce downtime, lower scrap rates and contribute to a more economical production flow. Straightforward integration and clear operational benefits Intended for CNC machines equipped with a synchronised tapping spindle, the chuck accepts both right-hand and left-hand threads and compensates for synchronisation errors on both push and pull cycles. Installation requires standard mounting to a Weldon-type holder; once fitted, the synchronising function balances pitch differences that otherwise demand manual intervention. For shops consolidating tooling, the chuck offers a simple way to improve thread consistency without changing tapping parameters or introducing complex electronics. For specification advice or to confirm compatibility with a specific CNC synchronised tapping spindle, contact Metav Werkzeuge—Metav’s consultants can advise on application suitability and tool pairing via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 2000834904NW Designation: Synchronising tapping chuck DIN 1835 B+E M3–M10 Manufacturer: TECWERK Packaging unit: 1 UID: 2000834904NW Core specifications Thread range: M3–M10 Length A: 58 mm Outer diameter: 22 mm Length compensation: -/+ 0.5 mm Special features Weldon shank DIN 1835 B+E Coolant supply for through-tool cooling For CNC machines with synchronised tapping spindle Compensates synchronisation errors on compression and tension Suitable for right-hand and left-hand threads High run-out accuracy High clamping force via threaded tap collet with integrated square FAQ Which thread sizes are supported by this chuck? The synchronising tapping chuck supports thread sizes from M3 to M10 and is suitable for both right-hand and left-hand threads; refer to SKU 2000834904NW for exact designation. Can the chuck handle synchronisation errors during tapping? Yes. The chuck compensates synchronisation discrepancies under push and pull conditions with a ±0.5 mm length compensation to maintain thread integrity. Is through-coolant machining possible with this holder? Through-tool cooling is supported via the integrated coolant supply, enabling improved chip evacuation and tool life when using the chuck. Which mounting standard does the tool use? The holder uses a Weldon shank to DIN 1835 B+E, providing a secure clamping interface for CNC toolholders. Is the chuck suitable for high-precision series production? Designed for high run-out accuracy and strong clamping force, the chuck is intended to support consistent thread quality in serial CNC tapping applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
58mm Vertical Clamp 1,200N Closing Force, 1,400N Holding Force, Zinc Coated Massive Arm - Kukamet
The combination of a galvanised body, a 58 mm arm and up to 1,400 N holding force ensures reliable, repeatable clamping even in compact fixtures; benefit from durable performance and simple integration into existing jigs. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vertical clamp 213 — Kukamet vertical clamp with 58 mm arm and galvanised finish A robust Vertical clamp 213 vertical clamp designed for secure clamping in assembly jigs, fixtures and workshop setups. Solid holding arm for increased rigidity Galvanised surface for corrosion resistance Compact 58 mm arm for tight fixture spaces Up to 1,400 N holding force for dependable retention Consistent retention for repetitive production The decisive advantage of this clamping device is its measured retention: a max. holding force of 1,400 N and a clamping force of 1,200 N provide the mechanical reliability required for repeatable operations. In practice, the distinction between clamping and holding force matters: the clamping force is the active force applied during engagement, while the holding force indicates how well the workpiece remains in position under load. These figures translate into fewer process interruptions and lower scrap rates, which improves throughput in small-batch and serial production alike. The data-driven performance supports precise fixturing and predictable results. Durable construction for workshop environments Corrosion resistance and structural integrity reduce downtime and service needs: the main components are galvanised, which slows surface corrosion in humid or oily shop conditions, and the device features a solid holding arm to resist flex under load. The angled foot mounting gives a secure attachment surface for fixtures and plates, spreading forces into the base. For maintenance, the galvanised finish and simple geometry enable straightforward inspection and cleaning, extending service intervals and lowering total cost of ownership compared with untreated alternatives. Space-saving design that integrates easily With a compact 58 mm arm and a lightweight build of 0.242 kg, the clamp is suitable where space is limited and component access must be preserved. The modest envelope allows integration into multi-clamp fixtures, making it easier to increase clamping points without obstructing toolpaths or assembly access. The small footprint also simplifies retrofitting into existing jigs: the angled foot lets the clamp be mounted close to edges or tight corners, maintaining clearance for machining, welding or inspection processes. Practical applications and workshop advantages Engineered for everyday use in assembly, light machining and inspection jigs, this clamp performs reliably in repeatable positioning tasks. Typical applications include fixture retention on welding tables, locating and holding small workpieces for manual assembly, and use as a mechanical stop in measuring setups. The combination of a solid arm, galvanised finish and defined force ratings supports safer operation and faster cycle times, reducing the need for over‑dimensioned clamping solutions while improving ergonomics at the workstation. Technical documentation and PDF catalogue pages are available for integration planning. Contact Metav Werkzeuge for tailored advice on the Kukamet vertical clamp 213 or to request detailed technical drawings and mounting recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 213-2-D-C1 GTIN: 8680731501872 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Numbers / Core technical data Arm length: 58 mm Weight: 0.242 kg Max clamping force: 1,200 N Max holding force: 1,400 N Special features Material: galvanised Mounting: angled foot Massive solid holding arm Category: vertical clamp (spanner) FAQ What is the maximum holding force of this vertical clamp? The clamp delivers a maximum holding force of 1,400 N; the Kukamet Vertical clamp 213 is specified for dependable retention in light- to medium-duty fixtures. Which mounting method is recommended for stable installation? An angled foot mounting is provided for secure attachment; the angled foot allows direct fastening to fixture plates and helps distribute forces into the base. Is the clamp suitable for humid or oily workshop conditions? Yes, the galvanised finish on the Vertical clamp 213 improves corrosion resistance and is suitable for typical workshop environments where surface protection is required. How compact is the clamp for tight fixture layouts? The device features a 58 mm arm and a compact overall envelope; its lightweight 0.242 kg construction facilitates placement in multi-clamp fixtures without obstructing access. Can technical drawings or catalogue sheets be obtained for planning? Technical documentation and a catalogue page are available for the Kukamet vertical clamp 213 (SKU 213-2-D-C1); contact Metav Werkzeuge to receive the PDF data sheet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Vertical Clamp 1,200N Closing Force, Massive Holding Arm, Angle Base - Kukamet
Take advantage of the combination of a massive holding arm, a compact 58 mm arm length and a 1,400 N maximum holding force for secure, repeatable clamping in production jigs. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 213 by Kukamet – 58 mm arm, 1,400 N holding force Vertical clamp 213 is a compact vertical lever clamp designed for secure workpiece fixation in jigs and fixtures, offering robust force control in limited spaces. Massive holding arm for enhanced rigidity 58 mm arm length for compact fixtures Max holding force 1,400 N for secure clamping Black oxide finish for corrosion resistance Reliable clamping performance for continuous production The clamp delivers defined clamping and pressing values that support stable production cycles: 1,400 N holding force and 1,200 N pressing force ensure workpieces remain fixed during machining and assembly. The distinction between the two figures is practical: the holding force denotes the static retention capacity under lateral loads, while the pressing force indicates the axial load applied during closure. This separation improves process control and reduces the risk of movement-related rejects, enabling more consistent output and less rework. Compact, robust design for versatile fixtures Built around a 58 mm arm and a massive holding arm, the clamp combines a small footprint with high rigidity. The angle foot mounting provides a stable attachment point for jigs and fixture plates, while the black oxide finish offers surface protection against corrosion in everyday workshop conditions. At approximately 0.242 kg, the unit is light enough for compact fixtures but engineered for long service life, making it suitable where space is limited yet clamping reliability must not be compromised. Simple integration into lever and fixture systems The model is ready for straightforward integration into standard clamping arrangements and lever systems, offering a repeatable mechanical interface for manual or semi-automated setups. Identification is simplified by the internal SKU B213-2-D-C1, which supports inventory management and replacement ordering. As a vertical lever clamp, it is particularly useful in production jigs where quick actuation and consistent retention are required, helping to maintain throughput and reduce set-up times. For dependable clamping in compact fixtures, choose the Kukamet vertical clamp 213 and contact Metav Werkzeuge for tailored advice and reliable supply direct from Emmerich. Technical data SKU: B213-2-D-C1 GTIN: 8682843522431 Brand: Kukamet Finish: Black oxide Model name: 213 Core data Arm length: 58 mm Max holding force: 1,400 N Max pressing force: 1,200 N Weight: 0.242 kg eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Angle foot mounting Designed as a vertical lever clamp Compact design for limited-space fixtures Suitable for jig and fixture integration FAQ What is the difference between holding force and pressing force? The holding force indicates the static retention capacity under load, while the pressing force describes the axial force applied when closing the clamp; the Vertical clamp 213 provides both 1,400 N holding and 1,200 N pressing values for clear process control. Can the clamp be mounted on a fixture plate with an angled interface? Yes, the clamp uses an angle foot mounting, which is intended for secure attachment to fixture plates and angled mounting positions in jigs and tooling. Is the clamp suitable for compact fixtures and small jigs? The 58 mm arm and compact design make the unit well suited to small jigs and confined fixture spaces, offering high rigidity without a large footprint. How is the surface treated and what benefit does it bring? The component has a black oxide finish, which improves surface corrosion resistance and reduces reflective glare during handling and inspection. Which identifier should be used for reorders or inventory? Use the SKU B213-2-D-C1 and GTIN 8682843522431 to ensure correct identification of this vertical clamp in procurement and stock systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Vertical Clamp 1200N Closing Force, Massive Arm With Safety Lock, Zinc-Plated - Kukamet
A compact galvanised vertical clamp with a massive holding arm and safety locking provides secure, repeatable fixturing with 1,400 N holding force and 1,200 N clamping capacity; ideal for jigs and fixtures where consistent pressure and corrosion resistance matter. Order directly via Metav Werkzeuge or consult the specialists for selection support and availability. 213 Vertical clamp — Galvanised vertical clamp with 1,400 N holding force (Kukamet) The 213 Vertical clamp is a galvanised, angle-foot vertical clamping device designed for secure fixturing in jigs and assembly fixtures across workshop and light industrial applications. Galvanised construction for corrosion resistance 58 mm massive holding arm Safety locking mechanism fitted Holding force up to 1,400 N Reliable clamping for high-cycle production The clamp delivers defined holding force and clamping force values—1,400 N and 1,200 N respectively—ensuring consistent retention of workpieces under repetitive loads. This reproducible performance reduces setup variation and supports process stability in machining and assembly operations. By specifying rated forces rather than vague claims, the unit enables planners to calculate fixture loads precisely and match the clamp to the required fixturing task. Built for durable workshop use Constructed with a galvanised finish and a massive holding arm, the device resists corrosion and mechanical wear common in shop-floor environments. The safety lock secures the lever in position once clamping is achieved, preventing accidental release during handling or vibration. The angle foot mounting provides a stable base for attachment to plates or fixtures, while the compact design keeps interference low in tight assemblies—benefits that lengthen service life and reduce maintenance interventions. Compact mounting and straightforward integration With a 58 mm arm and a net weight of 0.24 kg, the clamp is compact enough for confined fixture layouts yet robust enough to deliver significant forces. Its geometry and angle-foot mounting simplify positioning on tooling plates and allow for close-packed arrangements when multiple clamps are required. The combination of modest mass and clear force ratings supports efficient fixture design, lowering cycle-time losses linked to manual re-tensioning and enabling predictable clamping behaviour in production sequences. Choose Kukamet's 213 Vertical clamp for dependable fixturing and contact Metav Werkzeuge in Emmerich for availability and specification advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 213-2-D-L-C1 GTIN: 8680731501902 ECLASS: 21041717 ETIM: EC011973 Brand: Kukamet Core figures Holding force: 1,400 N Clamping force (max): 1,200 N Arm: 58 mm Weight: 0.24 kg Design & features Material: Galvanised Mounting: Angle foot Massive holding arm Safety locking mechanism SKU: 213-2-D-L-C1 FAQ What forces does the clamp provide? The clamp offers a holding force of 1,400 N and a maximum clamping force of 1,200 N, specified for consistent fixturing performance with the Kukamet 213 Vertical clamp. How is the unit mounted to a fixture? Mounting is by an angle foot, allowing secure attachment to tooling plates or fixture bases and straightforward integration into existing jig layouts. Is the clamp suitable for workshop environments? Yes. The galvanised finish and robust holding arm are intended for shop-floor use, giving corrosion resistance and mechanical durability for repeated cycles. What are the main dimensions and weight? The holding arm measures 58 mm and the device has a net weight of 0.24 kg, making it compact for tight fixture arrangements. Does the clamp include a locking feature? A safety locking mechanism is fitted to secure the lever in the clamped position and prevent unintended release. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Vertical Clamp 1200N Thrust, Massive Holding Arm With Safety Lock - Kukamet
Take advantage of reliable workshop clamping with a massive holding arm and an integrated safety lock, providing steady retention and safe operation in fixture work. Order the vertical clamp directly via Metav Werkzeuge or consult the team for integration advice. Vertikalspanner 213 – Vertical clamp with 1,200 N clamping force and safety lock by Kukamet The Vertikalspanner 213 is a vertical clamping device for fixture and assembly applications, combining a compact form with a robust holding arm and angle-foot mounting for secure attachment. Massive holding arm for stable clamping Safety locking mechanism prevents release 1,200 N clamping force, 1,400 N hold Angle-foot mounting for secure installation Reliable force where precision matters The Vertikalspanner 213 delivers a defined clamping force of 1,200 N and a holding force of 1,400 N, values that ensure secure immobilisation of components in repetitive assembly and machining fixtures. The forces are specified to give planners a comparable baseline when designing jigs or selecting complementary clamps. The integrated safety lock reduces the risk of accidental release during handling, so workpieces remain fixed once clamped; this translates directly into fewer process interruptions and improved throughput. Compact footprint with secure attachment options A short 58 mm arm minimises overhang while keeping contact pressure directed where needed, enabling dense fixture layouts without excessive interference. The angle foot mounting permits simple bolting to plates or subframes and is suited to modular fixturing concepts. At just 0.24 kg, the unit is lightweight enough to be mounted on adjustable fixtures or transport fixtures without noticeably increasing moving mass, yet substantial features such as the massive holding arm preserve rigidity where it counts. Workshop-ready finish and low-maintenance operation The component is supplied with a blackened finish, chosen for wear resistance and reduced glare on the shop floor. Construction emphasises straightforward function: lever action is supported by a solid arm and a positive safety catch that locks the lever in position. Routine maintenance is limited to occasional cleaning and inspection of the locking surfaces; this straightforward upkeep supports a consistent service life and reliable clamping performance in busy production environments. Secure workshop clamping with Kukamet precision — contact Metav Werkzeuge in Emmerich for tailored advice and fast supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: B213-2-D-L-C1 Model designation: Vertikalspanner 213 Manufacturer: Kukamet Facts Clamping force: 1,200 N Holding force: 1,400 N Arm length: 58 mm Weight: 0.24 kg eClass: 21041717 ETIM: EC011973 Special features Mounting: angle foot Finish: blackened Massive holding arm Safety lock Material: blackened finish SKU: B213-2-D-L-C1 FAQ What is the maximum clamping force of this vertical clamp? The vertical clamp provides a maximum clamping force of 1,200 N and a holding force of 1,400 N for secure fixation with the Vertikalspanner 213. How is the clamp mounted to a fixture plate? Mounting is via an angle foot, which allows bolting to plates or subframes; the design supports modular fixture layouts and stable attachment. Is the locking mechanism suitable for repeated automated use? The safety lock and the massive holding arm were designed for frequent operation and reduce the risk of unintended release during repetitive processes. What material finish does the clamp have and why? The clamp is supplied with a blackened finish, chosen for wear resistance and practical longevity in workshop environments. Can the clamp be used in compact fixture layouts? Yes, the short 58 mm arm and compact design make the unit suitable for dense fixturing where space is limited. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Workpiece Driver Ø36-Ø50mm Compatible With Calipers - Vertex
Take advantage of precise, repeatable calibration with the combination of a compact 58 mm diameter and compatibility for calipers Ø36–Ø50 mm; order the workpiece carrier directly via Metav Werkzeuge or ask our consultants for tailored advice. Workpiece carrier VDC-50 – caliper adapter for Ø36–Ø50 mm Workpiece carrier VDC-50 provides a compact adapter for precision caliper measurement, designed to support consistent handling of round workpieces in inspection and small-batch production. Precision workpiece carrier for calipers Ø36–Ø50 mm 58 mm external diameter for stable seating Lightweight 0.3 kg for easy handling Compatible with Vertex measurement accessories Better repeatability for routine measurements The VDC-50 serves as a reliable adapter that standardises the seating position of round components, reducing operator-induced variance during repeated checks. By matching the caliper's jaws to a defined contact interface, the accessory supports more consistent centre alignment and axial orientation. This results in fewer outliers during batch inspection and a smoother handover to quality documentation. The described function is particularly useful where geometric tolerances are tight and measurement scatter must be minimised. Faster handling with a compact, low-mass design A diameter of 58 mm combined with a mass of 0.3 kg means the adapter is portable and straightforward to fit and remove, shortening cycle times on the measurement bench. The reduced mass lowers operator fatigue during frequent checks and allows quicker repositioning between parts. Where throughput matters, the compact format contributes to a more efficient workflow without sacrificing the stability required for precise readings with dial or digital calipers. Simple integration into existing inspection setups Designed for use with calipers that accept external supports from Ø36–Ø50 mm, the accessory integrates into established quality-control processes without requiring additional fixtures. Labelling and traceability are supported by the Vertex VDC-50 SKU and GTIN, enabling systematic inventory control and faster replacement. For teams standardising measurement protocols across multiple benches, the adapter is a pragmatic component that aids reproducible measurement technique and reduces the need for bespoke jigs. Contact Metav Werkzeuge for a technical consultation on the Vertex VDC-50 and secure precise measuring workflow from our Emmerich stock Technical Data Article number: VDC-50 GTIN: 4061905086281 Name: Workpiece carrier Facts Diameter: 58 mm Suitable for calipers: Ø36–Ø50 mm Weight: 0.3 kg ECLASS: 21029190 Special features Manufacturer: Vertex Category: Vertex accessories Image available (thumbnail provided) FAQ What calipers are compatible with this adapter? The workpiece carrier VDC-50 is suitable for calipers designed to accept supports within the Ø36–Ø50 mm range; compatibility should be confirmed against the measuring instrument's jaw geometry. How does the adapter improve measurement repeatability? By providing a defined seating diameter and stable contact surface, the VDC-50 reduces positional variation between checks, improving repeatability for routine radial and diameter measurements. Is the VDC-50 suitable for small-batch production inspection? Yes, the Vertex VDC-50 is intended for inspection workflows and small-batch production where quick, repeatable checks with calipers are required. What are the physical dimensions and weight? The adapter has an external diameter of 58 mm and weighs 0.3 kg, allowing easy handling and rapid placement during inspection cycles. Can the adapter be used with digital calipers and dial calipers alike? The VDC-50 is compatible with calipers that accept the specified seating range; both digital and dial calipers that meet this requirement can be used. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
590mm Chip Hook 500mm Reach, 8mm Hook Ø, 130mm Shield Ø - TECWERK
Take advantage of the combination of extended reach, a protective shield and an ergonomic plastic handle for safer, faster chip removal in production and maintenance environments; Order the TECWERK chip hook directly via Metav Werkzeuge or ask our consultants if needed TECWERK chip hook L500 mm with 130 mm shield A TECWERK chip hook designed for controlled swarf collection and safe access in machine bays and tight workspaces Long 590 mm reach 130 mm protective shield 90 mm plastic handle 8 mm hook diameter Extended reach for efficient chip removal The tool delivers a measured working reach that improves process efficiency and reduces handling time. With a total length of 590 mm and a hook length of 500 mm, the device enables chip extraction from deeper fixtures and along machine beds without repeated repositioning. The combination of reach and a stiff 8 mm hook keeps engagement reliable during continuous use, so maintenance cycles are shorter and workflows remain uninterrupted. Built-in protection and ergonomic handling A 130 mm protective shield minimises scatter and shields operators from rebounding swarf, while the 90 mm plastic handle offers tactile control and simple handling when guiding the hook. In workshops where visibility and control matter, these elements reduce the risk of accidental contact and make routine cleaning safer. The shield also helps contain debris for easier collection, supporting a tidier workspace and fewer secondary cleaning steps. Practical applications and supply confidence This swarf hook is suited to general workshop and machine-room use where manual removal of chips is required, particularly in metalworking settings where reach and containment are essential. Its straightforward design supports quick inspection and cleaning, with no specialised maintenance needed. Supplied by Metav Werkzeuge from their Emmerich quality hub, customers benefit from established logistics and a broad product range that supports dependable restocking and consistent tool quality For tailored advice or to request delivery from Metav Werkzeuge’s Emmerich stock of TECWERK chip hooks, contact our specialists by e‑mail or phone for guidance on suitability and lead times Technical data Article number: 4000832895NW SKU: 4000832895NW Product type: Chip hook Manufacturer brand: TECWERK Facts Total length: 590 mm Hook length: 500 mm Hook diameter: 8 mm Protective shield diameter: 130 mm Handle length: 90 mm Packaging unit: 1 Special features Plastic handle (Ku.-Griff) Protective shield for swarf containment Long-reach design for deep-access chip removal Robust single-hook construction FAQ What is the total length and reach of the tool? The listed total length is 590 mm with a hook reach of 500 mm on the TECWERK chip hook (SKU 4000832895NW), suitable for accessing recessed machine areas. How does the protective shield help during work? The 130 mm protective shield reduces chip scatter and protects surrounding components, improving workplace cleanliness and operator safety when using the chip hook. What materials is the handle made from and how does it affect grip? The handle is a plastic grip of 90 mm length, designed to offer secure handling and control while guiding the hook through chips and debris. Is the tool suitable for heavy-duty metalworking environments? The tool’s 8 mm hook diameter and long-reach geometry make it appropriate for routine chip removal in metalworking shops; it is intended for manual swarf handling tasks rather than as a substitute for powered extraction. How should the tool be maintained? Maintenance consists of regular inspection and cleaning to remove accumulated swarf; the simple construction supports quick checks and keeps downtime to a minimum. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
595mm SK40 Tool Holder Module 6, Polypropylene Durable Black - TECWERK
Take advantage of a lightweight, chemical‑resistant construction combined with a compact 6‑module layout to keep SK40 toolings organised and immediately accessible; order through Metav Werkzeuge or consult our advisors for tailored delivery options. Tool holder SK40 – PP 6‑module, 595 × 90 × 101 mm by TECWERK The Tool holder SK40 – PP 6‑module, 595 × 90 × 101 mm is a modular rack for secure storage and transport of SK40 tool mountings in machine shops and production cells. SK40 taper compatibility for CNC toolings Polypropylene body for impact resistance Acid- and coolant‑resistant construction Space‑saving 6‑module layout Organised tool storage that speeds machine setup A modular rack designed for SK40 mountings delivers measurable gains in efficiency by reducing search and handling times. The 6‑module format and the specified footprint of 595 × 90 × 101 mm allow a coherent arrangement of frequently used toolholders so changeovers run smoother. By keeping tool mountings grouped by type, the system contributes to shorter spindle idle times and a more predictable production flow. Durable polypropylene body for workshop environments Constructed from polypropylene, the tray offers impact‑ and break‑resistance, together with acid and coolant resistance, which means routine exposure to cutting fluids will not compromise the holder’s integrity. The material choice protects tooling investment and reduces replacement frequency, supporting a lower total cost of ownership for shop equipment. Lightweight design for safe handling and efficient storage At approximately 0.235 kg, the rack is intentionally lightweight, permitting quick repositioning within a toolroom or on a workbench without lifting aids. The compact depth and height ensure it occupies minimal bench and cabinet space, allowing better utilisation of storage areas while still keeping SK40 holders immediately accessible when needed. Practical integration with workshop logistics The modular tray is ready to be incorporated into standard shop processes: it accommodates SK40 tool mountings, is resistant to typical workshop contaminants, and presents a consistent, stackable footprint for locker or trolley systems. For specialist requirements or compatibility checks, Metav Werkzeuge provides application support and can advise on how best to integrate the rack into existing tool management routines. Contact Metav Werkzeuge for supply and integration advice on TECWERK tool holders – order via info@metav-werkzeuge.com or call +49 2822 7131930 for reliable delivery from Emmerich Technical data Article number: 9000453680NW Type: Tool holder Taper: SK40 Version: 6‑module Label: Tool holder SK40 a. PP module 6er B.595xT.90xH.101mm Facts Width: 595 mm Depth: 90 mm Height: 101 mm Weight: 0.235 kg Packaging unit: 1 Special features Material: polypropylene Impact‑ and break‑resistant Acid‑resistant Coolant‑resistant Colour: black Intended for tool mountings (SK40) FAQ What taper does the tool holder support? The TECWERK tool holder supports SK40 taper mountings and is designed specifically for storage and handling of SK40 toolholders (SKU 9000453680NW). Is the tray resistant to cutting fluids and acids? Yes, the polypropylene construction of the Tool holder SK40 – PP 6‑module is acid‑ and coolant‑resistant, making it suitable for environments where fluids are present. How large is the module and what is its footprint? The 6‑module tray measures 595 × 90 × 101 mm, providing a compact footprint that fits common bench and cabinet layouts. How much does the holder weigh and how easy is it to move? The tray weighs approximately 0.235 kg, which makes it easy to lift and reposition within the workshop without additional handling equipment. Can the holder be used for other taper systems? This rack is configured for SK40 mountings; for alternative taper systems or custom requirements, Metav Werkzeuge can advise on suitable solutions and compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
598mm Rod 7/16-20UNF Thread, Pull Rod for Holders - Vertex
Benefit from a combination of 7/16-20UNF thread, 598 mm length and a lightweight build of 0.8 kg to ensure dependable retention and consistent tool seating in R8 spindles. Order the VDR-R8-A directly via Metav Werkzeuge or consult the product specialists for application advice. VDR-R8-A Drawbar for R8 spindles — 7/16-20UNF, 598 mm The VDR-R8-A is a drawbar intended for R8 tool retention applications, engineered to provide repeatable clamping and reliable tool seating in machining spindles. R8-compatible drawbar with 7/16-20UNF thread 598 mm length for deep engagement Lightweight construction at 0.8 kg SKU VDR-R8-A, GTIN 4061905091339 Consistent retention for precision machining A reliable retention element is essential for repeatable machining results. The drawbar uses a standard 7/16-20UNF connection, facilitating compatibility with spindles and retention systems that accept this UNF thread. The 598 mm overall length provides extended engagement, which helps maintain concentricity and reduces axial play during cutting cycles. With a mass of 0.8 kg, the component offers a balance between sufficient inertia for stable seating and manageable handling during setup. These characteristics contribute directly to reduced set-up variation and improved process stability, which in turn supports predictable part quality and lower scrap rates. Installation and compatibility with R8 toolholders Thread conformity and correct engagement depth are decisive for safe operation. The specified 7/16-20UNF thread is a common standard for retention components and ensures straightforward mechanical connection where R8 interfaces are specified. The extended length is designed to accommodate deeper toolholder geometries, enabling secure clamping without excessive protrusion. Installation should follow the machine tool or toolholder manufacturer's instructions for torque and inspection intervals to preserve the integrity of the spindle interface. Routine checks for thread condition and axial wear are recommended to sustain secure clamping and repeatable performance. Supply reliability and partner advantages Sourcing precision components through a focused distributor reduces procurement risk and shortens lead times. Metav Werkzeuge acts as a quality filter for the European market, combining broad availability with specialist advice; this supports efficient replenishment and process continuity on the shop floor. The association with Vertex underlines original-equipment provenance for the retention rod, while Metav’s experience and inventory breadth ensure transparent order handling from Emmerich to the workbench. Choosing this type of component supports operational reliability and a predictable supply chain for production environments that demand consistent toolholding. For precise R8 tool retention and supply assurance, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; consultants are available to verify fitment and application details Technical Data Article number: VDR-R8-A GTIN: 4061905091339 Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b8/2f/97/63/63972fb8c806fb82109e34dc/VDR-R8-S-main.png Facts Length: 598 mm Weight: 0.8 kg Thread: 7/16-20UNF Special features Compatibility: R8 toolholder retention SKU: VDR-R8-A Category: Vertex FAQ What spindle interfaces is this drawbar compatible with? The VDR-R8-A drawbar is specified for R8 toolholder retention and uses a 7/16-20UNF thread that matches standard retention fittings for R8 spindles. Is the material specified for the VDR-R8-A? Material data is not provided for the VDR-R8-A; the available technical details list thread, length and weight for selection and fitment assessment. How does the 598 mm length influence performance? A 598 mm engagement length increases axial contact and helps maintain concentric seating in deeper toolholder configurations, improving repeatability during machining. Are torque values included for installation? No torque values are given for the VDR-R8-A; follow the machine tool or toolholder manufacturer's instructions for correct tightening and inspection routines. Can this drawbar be ordered via Metav Werkzeuge? Yes, the VDR-R8-A is available through Metav Werkzeuge; product specialists can confirm compatibility and delivery options. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
59mm Boring Bar Holder E2 S Reduced Vibration, DIN 69880 - TECWERK
Compact VDI30 holder with a 25 mm clamping diameter and a slotted wrap that reduces vibration for stable boring. Built to DIN 69880 as Form E2 S, Type B ensures secure seating and retention in turret-mounted operations. Order the tool holder directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Tool holder for boring bars (Type B, Form E2 S) — VDI30, Clamping Ø25 mm The TECWERK Tool holder for boring bars is a VDI30-mounted, slotted toolholder designed for secure clamping of boring bars in turret systems, optimised to reduce chatter in medium‑duty machining. VDI30 mount for standard turret systems Clamping diameter 25 mm for round bars Slotted wrap reduces vibration and chatter Secured with retaining ring; external coolant-ready Consistent clamping and reduced vibration for precision boring The holder provides consistent clamping with a defined clamping diameter 25 mm, delivering repeatable axial and radial positioning for boring operations. Its slotted design encircles the bar and reduces vibration, which helps to stabilise the cutting process and improve bore finish. Designed for turret applications, the VDI30 interface ensures straightforward integration with common machine tool systems, so cycle reliability and tool runout are improved without trial-and-error setup. Production-ready dimensions and standard compliance With a body diameter of D 59 mm and an overall length of L 112 mm (L1 90 mm usable), the holder is compact yet robust for workshop use. The toolholder meets DIN 69880 as Form E2 S and is supplied as Type B, which is not through-drilled; this means internal coolant is not available on this variant and external coolant is recommended for chip evacuation and tool life. The design includes a retaining ring that secures the bar and prevents disengagement from the turret, reducing the risk of tool loss during index cycles. Practical guidance for selection and operation The slotted section is dimensioned to industry practice: for smaller bars (≤16 mm) the effective slot length is around 4×D, for 20–25 mm bars about 3×D and for larger diameters approximately 2.5×D; this ratio supports stable clamping without over‑constraining the shank. The holder is suitable for full‑round bars with a V‑groove, enabling a secure bite where required. If internal cooling or a through‑shaft length adjustment is necessary, consider a through‑drilled variant; the non‑through‑drilled Type B is optimised for secure clamping and external coolant applications. For questions about fit or compatibility with specific boring bars and turret noses, Metav’s technical advisors are available by email or phone to assist with selection and integration. Contact Metav Werkzeuge today to confirm suitability for a specific application or to request tailored advice from our precision tooling specialists. Technical data Article number: 2000833479NW Product type: Werkzeughalter für Bohrstangen Type: B Form: E2 S Standard: DIN 69880 Facts D: 59 mm L: 112 mm L1: 90 mm d2 (clamping): 25 mm d1: 30 mm Special features VDI30 turret interface Slotted wrap design to reduce vibration Secured against falling out with retaining ring Suitable for full-round bars with V-groove Type B = not through-drilled (external coolant recommended) FAQ What is the clamping diameter of this holder? The TECWERK tool holder for boring bars (Type B, Form E2 S, SKU 2000833479NW) has a clamping diameter of 25 mm. Can this Type B holder be used with internal coolant? No; the Type B variant is not through‑drilled, so internal coolant is not available on this holder. External coolant is recommended for chip control and cooling. Which turret interface does the holder use? The holder uses a VDI30 interface, compatible with standard VDI turret systems. Which dimensions are relevant for installation in the turret? Key dimensions are D 59 mm, L 112 mm, and L1 90 mm; the holder also presents a tool shank connection of d1 30 mm and the clamping bore d2 25 mm. How does the slotted design improve boring results? The slotted wrap reduces chatter by allowing the holder to grip the bar more uniformly and to damp vibrations, improving surface finish and extending tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
59mm Thread Tapping Holder M3–M14 SK40 With Quick-Change, Axial Compensation DIN 69871 Form A - TECWERK
Take advantage of the combination of secure SK40 seating, length compensation under load and a quick-change insert for reliable torque transmission to maintain consistent tapping quality and minimise downtime. Order the thread tapping chuck directly via Metav Werkzeuge or ask the consultants if further specification support is required. Thread tapping chuck DIN 69871 Form A M3–M14 SK40 L 59 mm — TECWERK The Thread tapping chuck DIN 69871 Form A M3–M14 SK40 L 59 mm is a quick-change tapping chuck designed for precise internal thread production on machines equipped with an SK40 spindle interface. Steep taper to DIN 69871 Form A Length compensation under compression and tension Ball-guided bushing for precise alignment Quick-change insert for torque transmission Suitable for taps M3–M14 in SK40 holder Secure seating and repeatable concentricity for reliable tapping The DIN 69871 compliance and SK40 interface ensure a secure mechanical connection between spindle and toolholder, delivering consistent concentricity for tapping operations. The steep taper provides a firm fit that reduces vibration and runout, which in turn supports improved thread form and surface finish. Where machine stability and repeatability matter, this holder offers a measurable increase in process reliability without requiring complex setup changes. Stable thread formation through axial compensation and guided support Integrated length compensation for both compression and tension protects the tap and the workpiece during thread cutting, accommodating axial deviations encountered in interrupted or deep-hole tapping. The ball-guided bushing ensures axial alignment while the quick-change insert transmits torque cleanly to the tap, reducing the risk of breakage and improving tool life. These features together promote uniform thread geometry across batches and lower reject rates in serial production. Efficient integration and compact dimensions for workshop workflows Compact dimensions — projection A: 59 mm, diameter D: 36 mm, pilot d: 19 mm — allow straightforward integration into existing tool cycles and reduce the risk of collisions in tight tool arrangements. The design supports fast tooling changes and short set-up times, contributing to higher machine uptime and more efficient shop-floor throughput. The combination of robust mechanical design and quick-change capability is particularly suitable for small and medium series where flexibility and reproducibility are priorities. For robust tapping performance with TECWERK quality, contact Metav Werkzeuge for tailored advice or to place an order through our Emmerich distribution centre via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832237NW Product: Thread tapping chuck (Gewindeschneidfutter) Standard: DIN 69871 Form A Manufacturer: TECWERK Packaging unit: 1 Facts Suitable for taps: M3–M14 Shank interface: SK40 Projection length A: 59 mm Diameter D: 36 mm Pilot d: 19 mm Special features Steep taper to DIN 69871 Form A Length compensation on compression and tension Ball-guided bushing Quick-change insert for torque transmission Torque transfer via clamped quick-change insert FAQ Which tap sizes are compatible with this tapping chuck? The Thread tapping chuck DIN 69871 Form A M3–M14 SK40 L 59 mm is specified for use with taps from M3 to M14 and supports standard metric tapping tasks. How does the length compensation protect the tap during operation? Length compensation in the Thread tapping chuck DIN 69871 Form A absorbs axial load variations under compression and tension, reducing peak stresses on the tap and lowering the risk of breakage. Can this chuck be used on any SK40 spindle? Designed to DIN 69871 Form A, the TECWERK tapping chuck fits SK40 spindles that conform to the same adapter standard, ensuring secure seating and repeatable alignment. What features improve thread quality with this holder? The combination of a steep taper, ball-guided bushing and quick-change insert in the TECWERK thread tapping chuck promotes stable torque transmission and precise axial guidance for consistent thread form. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
59mm Tool Holder for Boring Bars E2 S Slotted, No Through‑Bore, DIN 69880, VDI40 - TECWERK
Take advantage of the combination of stable clamping, vibration reduction and DIN‑standard compatibility to keep boring operations precise and productive; order the holder directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Tool Holder for Boring Bars (VDI40) — E2 S, 25 mm Clamping, Type B The TECWERK tool holder for boring bars is a VDI40 interface component designed for secure clamping of 25 mm boring bars in turning and milling turrets, engineered for reduced vibration and repeatable positioning. Form E2 S for stable clamping VDI40 interface, 25 mm clamping diameter Slotted design reduces machining vibration Secured in turret by a retaining ring Stable clamping for precision boring and reduced vibration This E2 S tool holder is engineered to combine mechanical rigidity with dynamic damping. The slotted design envelops the boring bar to reduce chatter and improve surface finish, while the VDI40 mounting provides a standardised interface for quick replacement. The result is consistent runout control and improved tool life compared with non‑slotted holders. For workshops that prioritise dimensional accuracy, this configuration decreases the need for rework and supports tighter tolerances on turned bores. Versatile machining options with clear coolant guidance The holder supports both standard external coolant arrangements; however, Type B variants are not through‑drilled, so internal through‑tool coolant is not available on this specific unit. The design remains suitable for solid round boring bars, including those with a V‑groove, and allows straightforward adoption of external coolant piping. This separation of coolant options helps to clarify setup choices during process planning and ensures that cooling strategy aligns with machine and bar specifications. Compact dimensions and DIN‑standard fit for easy integration Conforming to DIN 69880, the holder’s compact footprint and measured interface dimensions enable straightforward integration into existing VDI40 turrets. Key interface dimensions support reliable seating and retention: the outer diameter and shank proportions match common turret receptacles, and the retaining ring prevents accidental release into the turret. The E2 S form gives a balance between accessible tool overhang and secure contact area, supporting stable cutting conditions for precision boring tasks. Contact Metav Werkzeuge for tailored advice on TECWERK VDI40 holders and secure fast supply from our Emmerich quality hub Technical data Article number: 2000833490NW Product: Tool holder for boring bars Brand: TECWERK Facts Outer diameter (D): 59 mm Clamping bore (d2): 25 mm Shank diameter (d1): 40 mm Overall length (L): 112 mm L1: 90 mm Standard: DIN 69880 Special features Slotted design to reduce vibration Suitable for full‑round bars with V‑groove Secured by retaining ring to prevent falling into turret External cooling possible; internal cooling requires through‑drilled shank Slotted engagement: up to 16 mm = 4×D; 20 and 25 mm = 3×D; from 32 mm = 2.5×D FAQ Is this holder compatible with VDI40 turrets? Yes. The TECWERK tool holder is designed for the VDI40 interface and fits standard VDI40 turret receptacles (SKU 2000833490NW). Can internal coolant be used with this Type B holder? No. This Type B variant is not through‑drilled, so internal through‑tool coolant is not available; external cooling is possible. What clamping diameter is provided? The holder provides a 25 mm clamping bore (d2) suitable for corresponding boring bars. Does the slotted design really reduce vibration? Yes. The slotted, wrapping geometry is intended to reduce vibration and increase stability compared with non‑slotted clamping, improving surface finish. How is the holder secured in the turret? The holder is retained by a retaining ring to prevent accidental release into the turret during operation. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
5mm Collet 5C Precision Collet, 0.02mm Accuracy, 87mm Length - Vertex
Benefit from precise 0.02 mm clamping, a compact 5 mm bore and an 87 mm length that supports versatile tool reach; combine accuracy, repeatability and practical reach for reliable workshop results. Order the collet directly via Metav Werkzeuge or consult our advisors for specification support. 5C collet (5 mm) — 0.02 mm precision, Vertex A 5C collet engineered for accurate clamping of small-diameter tool shanks in machining and toolholding applications, offering consistent runout control and reliable repeatability. Precision clamping to 0.02 mm 5 mm bore for small-diameter tools Robust 87 mm length for deep reach Compatible with 5C toolholders Consistent, measurable clamping precision for accurate machining The clamping sleeve delivers measurable repeatability, specified at 0.02 mm, which translates into reduced runout and tighter tolerances on finished parts. This level of accuracy is particularly relevant for high-precision operations where concentricity and surface finish matter; a stable grip reduces vibration and preserves tool life. By relying on quantifiable values rather than subjective terms, workshop planners can integrate this component into quality control regimes and process documentation with confidence. Compact bore and length that expand workshop flexibility With a 5 mm bore and an overall length of 87 mm, the component suits applications that require access to recessed features or working with small-diameter tooling. The combination of a small clamping diameter and extended reach enables mounting of miniature cutters and reamers while maintaining a compact footprint in the spindle. In practice, this reduces the need for special adaptors and supports faster set-ups on conventional 5C toolholders, helping to streamline tool changeover and maintain consistent part geometry. Durable construction that supports repeat production cycles Weighing approximately 0.21 kg, the item balances mass and rigidity to deliver dependable clamping without unnecessary bulk. The design focuses on secure seating and stable axial alignment so that process consistency is preserved across production runs. Engineers and workshop managers can interpret these characteristics as indicators of predictable behaviour during milling, drilling and light turning tasks, allowing better planning for tooling life and replacement intervals. Contact Metav Werkzeuge in Emmerich for a technical quote on this Vertex 5C collet (SKU 5C-5) and secure expert guidance on integrating precision clamping into current setups Technical Data Article number: 5C-5 GTIN: 4061905093050 Brand: Vertex Facts Diameter: 5 mm Length: 87 mm Weight: 0.21 kg Accuracy: 0.02 mm eClass: 21041712 Special features Collet type: 5C SKU: 5C-5 Precision clamping for reduced runout Suitable for standard 5C toolholders FAQ What shank diameter does this collet accept? The 5C collet accepts a 5 mm shank and is supplied as SKU 5C-5 for small-diameter tools. How tight is the clamping accuracy? Clamping accuracy is specified at 0.02 mm, ensuring consistent runout control for the Vertex 5C collet. Which toolholders are compatible with this component? This unit is a 5C type and is compatible with standard 5C toolholders commonly used in general machining. What is the overall length and why does it matter? The overall length is 87 mm, providing additional reach for recessed operations while retaining stable clamping performance. Is the item suitable for heavy machining? The design prioritises precision and repeatability; assess application demands against the 0.02 mm accuracy and intended cutting forces before use in heavy material removal Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
5mm ER11 Collet Clamping Diameter 5mm, L18mm, Runout 5µm - TECWERK
Take advantage of the combination of precise runout control and full-length holding to ensure consistent tool performance and longer cutter life. The ER 11/4008 E collet offers compatibility with standard ER toolholders and a practical span-bridging capability for secure clamping of slightly undersized shanks — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Collet ER 11/4008 E – ER11 collet, 5 mm, TECWERK The ER 11/4008 E collet is a precision clamping sleeve designed for secure holding of 5 mm tool shanks in ER11 collet chucks, delivering high repeatability for machining and workshop applications DIN 6499-B standard compliance Suitable for ER collet chucks Full-length holding; clamps on chamfer Runout accuracy 5 µm Precision that keeps processes stable The primary benefit of this clamping sleeve is consistent concentricity: with a runout accuracy of 5 µm, cutters are held with tight concentricity, which reduces vibration and improves surface finish. The combination of full-length holding and uniform clamping pressure minimises axial and radial play, resulting in more predictable tool wear and fewer scrap parts. This stability is especially valuable in small-series production and precision workshop tasks where repeatability directly affects yield and downstream operations. Proven compatibility and useful span bridging Manufactured to DIN 6499-B, the collet integrates seamlessly with standard ER toolholders, ensuring reliable interchangeability across widely used clamping systems. The span diameter bridging: nominal −0.5 mm means the collet can safely bridge small gaps when a tool shank is slightly undersize, maintaining clamping force without additional shims. This feature simplifies tooling choices and reduces setup time, since intermediate sizing is not required and tools can be clamped on the guiding chamfer when appropriate. Compact design for tight setups and quick changes With compact dimensions (L: 18 mm, d: 5 mm, D: 11.5 mm) the sleeve is suited to confined tool zones and short overhang arrangements. The small footprint supports agile machine layouts and closer tool spacing on multi-spindle equipment. The ergonomic geometry also facilitates fast assembly and disassembly during tool changes, contributing to reduced machine downtime and more efficient workshop workflows. Engineered reliability for everyday production Built for repeatable performance in industrial and craft environments, this ER11 clamping sleeve delivers straightforward functionality without unnecessary complexity. The design keeps the tool held over the entire clamping length and permits clamping on the guiding chamfer, which together support secure, consistent gripping under machining loads. For procurement and process planners, the combination of standard compliance, compact form factor and measurable runout makes this an effective choice for precision workholding installations. Contact Metav Werkzeuge for expert advice on TECWERK ER11 collets and secure optimal clamping performance for your workshop or production line. Technical data Article number: 2000832860NW Type: ER 11 Description: Collet ER 11/4008 E, clamping diameter 5 mm, TECWERK Packaging unit: 1 Facts Runout / repeat accuracy: 5 µm Span diameter bridging: nominal −0.5 mm L: 18 mm d: 5 mm D: 11.5 mm Special features DIN 6499-B compliance Suitable for ER collet chucks Tools held over the whole clamping length Can be clamped on the guiding chamfer Compatible with standard ER11 systems FAQ What level of concentricity can be expected from this collet? The ER 11/4008 E collet is specified with a runout and repeat accuracy of 5 µm, which supports high-concentricity clamping and improved surface finishes in precision machining. Is this collet compatible with standard ER chucks? Yes — manufactured to DIN 6499-B, the sleeve fits ER11 collet chucks and is intended for use in common ER-type toolholders. Can the collet clamp tools with slightly undersized shanks? The collet features a span bridging of nominal −0.5 mm, allowing secure clamping of slightly undersized shanks without intermediate sizing; it can also be used on the guiding chamfer where appropriate. What are the key dimensions to check for machine compatibility? Key measurements are L: 18 mm, clamping diameter d: 5 mm and outer diameter D: 11.5 mm; the SKU is 2000832860NW for reference when ordering. Is this collet suitable for short-reach and compact tool arrangements? Yes — the compact form factor and full-length holding make the sleeve well suited to tight layouts and short overhang setups in workshop and production environments. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
5mm ER16 Collet Precision Clamping, Clamping Range 5mm, Length 27mm - TECWERK
Take advantage of precise clamping and compact design for reliable tool retention and consistent machining results; the collet's DIN 6499‑B compatibility and 5 µm runout specification support high repeatability. Order directly via Metav Werkzeuge or consult the specialists for application advice. ER 16 collet 426 E — 5 mm clamping diameter, TECWERK A ER 16 collet 426 E engineered for secure clamping of 5 mm tools in standard ER chucks, suitable for precision machining and workshop production *DIN 6499‑B compatibility for ER chucks *Full‑length clamping for secure tool hold *Runout and repeatability: 5 µm *Clamps on chamfer; compact length L 27 mm Precise clamping for consistent machining results The clamping sleeve delivers precision where it matters: a nominal clamping diameter of 5 mm combined with a documented runout / repeatability of 5 µm ensures tools are held concentrically, reducing vibration and improving surface finish. Compliance with DIN 6499‑B confirms dimensional and interface compatibility with common ER systems, simplifying integration into existing collet chucks. This technical reliability translates into fewer rejected parts and more predictable production cycles, a clear advantage in batch and serial manufacturing. Secure hold and flexible seating for varied tool geometries Designed for full‑length clamping, the sleeve grips the tool along the entire clamping surface so that short shanks and light tooling remain stable during operation. The ability to be clamped on the guiding chamfer increases versatility for tools that require seating on the lead‑in, while the specified span bridging (nominal minus 1.0 mm) allows the collet to accommodate slight undersize tolerances without intermediate adapters. With an overall length of L 27 mm and compact outer diameter, the component is suitable for confined toolholders and keeps the assembly profile low. Reliable specification and practical workshop benefits The collet's straightforward specification and proven interface minimise setup time: no intermediate sizes are required between standard tool diameters, and the geometry is intended to maintain concentricity over repeated changes. As a TECWERK clamping component supplied via Metav, it benefits from a distribution network focused on dependable stock levels and fast order processing. If additional technical clarifications are needed, the distribution team can advise on selection and compatibility to support uninterrupted workflow. For application-specific advice or to secure reliable supply of TECWERK ER collets, contact Metav Werkzeuge in Emmerich for expert consultation and transparent delivery information — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 2000832916NW Type: ER 16 Product: ER collet Brand: TECWERK Facts Clamping diameter: 5 mm Length L: 27 mm Inner diameter d: 5 mm Outer diameter D: 17 mm Runout / repeatability: 5 µm Special features Compatible with DIN 6499‑B Fits ER collet chucks Full‑length clamping; can be clamped on guiding chamfer Span bridging: nominal minus 1.0 mm No intermediate sizes required FAQ Is this collet compatible with standard ER 16 chucks? Yes. The ER 16 collet 426 E is manufactured to the DIN 6499‑B interface and fits standard ER 16 collet chucks. What clamping accuracy can be expected from this collet? The clamping sleeve offers a runout and repeatability specification of 5 µm under correct installation and good toolholder condition. Can the collet grip tools on the chamfer? Yes. The design allows clamping on the guiding chamfer, enabling secure seating of tools with chamfered shanks. What are the key dimensions to check when replacing a collet? Check clamping diameter (5 mm), overall length (L 27 mm) and outer diameter (D 17 mm); these dimensions ensure proper fit in the chuck and tool stability. What does span bridging nominal minus 1.0 mm mean? It indicates the collet can close sufficiently to accommodate a tool that is up to 1.0 mm under the nominal diameter, providing flexibility for slight undersized tools. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
5x5x5" Angle Plate High-Strength Cast Steel, Accuracy 0.01mm, 4.3kg - Vertex
Take advantage of the high‑strength cast steel construction and 0.01 mm accuracy to secure repeatable 90° fixturing; the solid 4.3 kg mass ensures thermal and mechanical stability during inspection and light machining. Order the VR‑55 Angle Plate directly via Metav Werkzeuge or consult our advisors for application support. VR‑55 Angle Plate — robust 90° clamping plate with 0.01 mm precision (Vertex) The VR‑55 Angle Plate is a compact precision clamping plate designed for stable 90° positioning in machining and inspection setups, optimised for workshop and metrology environments. High‑strength cast steel construction 0.01 mm calibration accuracy Compact 5 x 5 x 5" footprint Robust 4.3 kg mass for stability Consistent accuracy for measurement and machining The Angle Plate delivers 0.01 mm positional accuracy, providing a reliable datum for inspection and setup tasks. Built from high‑strength cast steel, the plate resists deformation and spreads loads evenly across its base, which reduces measurement variability and helps preserve spindle and gauge alignments. This combination of material and tolerance reduces rework and improves first‑pass yields, making it especially valuable where repeatable right‑angle fixturing is required. Stability and handling that simplify workflows A solid mass of 4.3 kg gives the fixturing base natural damping and resistance to movement during probing or light machining operations. The 5 x 5 x 5" footprint balances compactness with a stable contact area, so the plate fits easily on inspection tables, machine beds or inside fixtures while maintaining a low centre of gravity. The result is fewer clamp adjustments and faster setup times, supporting efficient workstation turnover without compromising on precision. Seamless integration into shop and metrology processes Designed as a clamping and fixturing component for workshop and inspection use, the plate mates with standard tooling and can be incorporated into modular setups. The robust construction from Vertex ensures long‑term dimensional stability, which supports calibration intervals and traceability within quality systems. The device is suitable for repetitive positioning tasks and serves as a dependable right‑angle reference in both production and quality assurance contexts. Contact Metav Werkzeuge today to discuss how the VR‑55 Angle Plate’s high‑strength cast steel construction and 0.01 mm accuracy can increase setup reliability at your workbench; our Emmerich‑based advisors will help specify the right fixtures for the application Technical data SKU: VR‑55 GTIN: 4061905089855 ECLASS: 21170130 Manufacturer: Vertex Core specifications Dimensions: 5 x 5 x 5" Material: high‑strength cast steel Accuracy: 0.01 mm Weight: 4.3 kg Features & applications 90° clamping and fixturing Stable mass for reduced vibration Suitable for inspection and light machining setups Compact footprint for versatile placement FAQ What tolerance can be expected from this angle plate? The VR‑55 Angle Plate is specified with a 0.01 mm accuracy, providing a precise right‑angle reference for inspection and setup tasks. What material is the plate made from? The plate is manufactured from high‑strength cast steel, chosen for dimensional stability and resistance to deformation during clamping and light machining. What are the physical dimensions and weight of the product? The unit measures 5 x 5 x 5" with a mass of 4.3 kg, offering a compact footprint combined with solid stability. Is the component suitable for metrology benches and machine beds? Yes — the VR‑55 Angle Plate is designed for secure 90° fixturing in both workshop and metrology environments, supporting repeatable measurement and positioning tasks. Which brand and SKU should be referenced when ordering? Order the VR‑55 Angle Plate from Vertex using SKU VR‑55 and GTIN 4061905089855 for clear identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
5 000 N Three-Point Vertical Clamp, Horizontal Foot, M12x80 Actuator, Blackened Finish - Kukamet
The compact vertical clamp delivers dependable clamping with a high holding force of 5,000 N and a maximum pressure of 4,500 N while remaining lightweight and easy to mount; order directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 211 (B211-5) by Kukamet — Horizontal foot, 5,000 N holding force The Vertical clamp 211 is a compact clamping device for secure workpiece fixation in machining and fixturing applications, offering stable horizontal-foot mounting for bench and fixture integration. Holding force up to 5,000 N Maximum pressure 4,500 N Horizontal foot for stable mounting Blackened finish for corrosion resistance Stable clamping that boosts process reliability The vertical clamping unit combines a high holding force and modest mass to secure components during machining operations. With a specified holding force of 5,000 N and a maximum pressure of 4,500 N, the device affords consistent fixation under load, reducing rework and stoppages. The M12 x 80 spindle provides precise actuation and repeatable contact, while the compact 1.54 kg body keeps fixture weight low. These characteristics translate into predictable process stability and shorter setup times for repetitive production runs. Space-saving mounting and robust surface treatment Designed for integration into workshop fixtures, the clamp features a horizontal foot for flat, space-efficient attachment and offers straightforward alignment with modular tooling plates. The blackened finish protects against surface corrosion and reduces glare in a busy machine environment. The compact footprint and standard spindle interface enable quick retrofitting into existing jigs, supporting flexible utilisation across milling, drilling and light assembly tasks without extensive retooling. Proven supply chain and service assurance for industry use Built for everyday shop-floor use, the clamp is manufactured to deliver durable performance and simple handling. The construction and finish emphasise longevity, while the proven mechanical specification supports consistent clamp cycles. As a distribution partner, Metav acts as a quality filter for the European market, providing centralised availability and reliable order processing from Emmerich. This combination of robust hardware and dependable supply reduces procurement complexity and supports uninterrupted workshop operations. Choose the Kukamet vertical clamp 211 for compact, high‑force clamping and contact Metav Werkzeuge in Emmerich for tailored technical advice via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: B211-5 GTIN: 8680731503845 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Facts Holding force (max): 5,000 N Maximum pressure: 4,500 N Weight: 1.54 kg Spindle: M12x80 Special features Mounting: horizontal foot Surface: blackened finish Arm: not applicable Special feature: none Category: Spanner FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 5,000 N, allowing secure fixation for a wide range of light to medium machining tasks. Which mounting method is used for fixing the clamp? The device uses a horizontal foot for stable attachment to fixture plates or bench mounts, simplifying alignment in compact set-ups. What spindle specification does the clamp use? Actuation is achieved via an M12 x 80 spindle, giving reproducible travel and compatibility with standard fixture drives. Is the surface treated for corrosion resistance? Yes, the clamp features a blackened finish, which offers enhanced surface protection suitable for workshop environments. Can this clamp be integrated into existing jigs and fixtures? The compact footprint and standard spindle interface allow straightforward integration of the clamp into existing jigs and fixture systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5 000 N Vertical Clamp With Safety Lock, M12x80 Spindle, 4 500 N Clamp Force, Blackened - Kukamet
Combining a robust 4,500 N clamping capacity with a positive safety lock and compact 1.54 kg construction, this vertical clamp delivers secure, repeatable fixturing for production and jigs. Order the vertical clamp directly via Metav Werkzeuge or consult the Metav specialists for fixture integration and stock availability. Vertikalspanner 212 – vertical clamp with 4,500 N clamping force and safety lock (Kukamet) The Vertikalspanner 212 is a vertical toggle clamp engineered for secure holding in jigs, fixtures and light industrial tooling applications. Safety lock for secure clamping 4,500 N clamping capacity 5,000 N holding capability Vertical foot mounting, blackened finish Consistent clamping power that stabilises production The device offers a clamping force of 4,500 N and a holding force of 5,000 N, delivering repeatable grip strength for batch work and short runs. The integrated M12x80 pressure spindle enables fine adjustment of contact pressure, so tolerances can be compensated without additional shims. For machining, assembly or inspection fixtures, the combination of rated forces and adjustability supports stable parts handling and reduces rework caused by shifting workpieces. Built for safety and compact workshop layouts A positive safety lock prevents accidental release once the clamp is engaged, increasing operator confidence and process reliability. The vertical foot mounting minimises the clamp’s footprint when integrated into platen or base plates, while the blackened burnished finish provides a uniform surface that resists visual wear in daily use. At 1.54 kg, the unit is lightweight enough for rapid fixture changes yet substantial enough to withstand frequent operation and lever actuation. Faster setup and reliable fixture integration As a compact toggle clamp, the model streamlines fixture assembly and reduces cycle time by providing quick mechanical engagement and repeatable positioning. The clamp’s construction suits production jigs, inspection benches and modular tooling systems where fast clamping and secure locking are essential. Delivered by Kukamet, the component is compatible with standard jig-making workflows and aids efficient shop-floor processes without complex adjustments. For tailored advice on integrating the vertical clamp into existing tooling or to reserve units from Metav Werkzeuge’s Emmerich distribution centre, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com — specialists will advise on suitability and availability. Technical Data Article number: B212-5-L GTIN: 8680731507935 Manufacturer: Kukamet Category: Spanner eClass: 21041717 ETIM: EC011973 Core technical data Weight: 1.54 kg Clamping force (max): 4,500 N Holding force (max): 5,000 N Pressure spindle: M12x80 Special features Safety locking (positive lock) Vertical foot mounting Material / finish: blackened burnished finish Design: vertical toggle clamp Story trigger: lever clamp FAQ What maximum clamping force does the Vertikalspanner 212 provide? The Vertikalspanner 212 provides a clamping capacity of 4,500 N (Kukamet vertical clamp, SKU B212-5-L). Is a safety lock fitted to the vertical clamp? Yes, the vertical clamp features a safety lock to prevent unintended release; this is standard on the Kukamet Vertikalspanner 212 (B212-5-L). How is the clamp mounted in a fixture? The unit uses vertical foot mounting, designed for plate or base-plate installation in jigs and fixtures; the product referenced is the Vertikalspanner 212 (Kukamet, B212-5-L). What is the finish and weight of the clamp? The clamp is supplied in a blackened burnished finish and weighs 1.54 kg (Vertikalspanner 212, Kukamet, SKU B212-5-L). Which applications suit this toggle clamp best? The clamp is suited to jigs, assembly fixtures and inspection benches where fast engagement and secure locking are required; see the Kukamet Vertikalspanner 212 (B212-5-L) for a compact, repeatable solution. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
6 mm Air Straight Grinder 22,000 rpm, Lightweight 0.6 kg - Vertex
Take advantage of the combination of high rotational speed, compact design, and lightweight handling for faster job cycles and reduced operator fatigue. Order the tool directly via Metav Werkzeuge or consult our specialists for tailored advice and availability. Vertex VAG-604 Pneumatic straight grinder — 22,000 r.p.m., lightweight 0.6 kg The Vertex VAG-604 pneumatic straight grinder is a compact, high-speed tool designed for precision surface finishing and deburring tasks in busy workshops and production cells High speed: 22,000 r.p.m. for efficient grinding Lightweight design at 0.6 kg for reduced operator fatigue Compact length 175 mm fits tight workspaces Faster finishing through high-speed pneumatic drive The pneumatic drive coupled with a top rotational speed of 22,000 r.p.m. delivers consistent material removal rates that shorten cycle times and increase throughput. As a cost-effective straight grinder, it is aimed at workshops and production environments where reliable, repeatable performance counts. The free-running speed is particularly beneficial for tasks such as light surface preparation, deburring and smoothing of welded seams, where the high rpm reduces the number of passes required and therefore the overall processing time. Ergonomic form that eases daily use With a weight of only 0.6 kg and a total length of 175 mm, the grinder offers a compact envelope that improves access in confined areas and reduces operator strain during prolonged use. The reduced mass assists in steady handling and better control when working on small components or intricate surfaces. This ergonomic balance supports smoother work sequences, helping teams to maintain consistent quality over longer shifts without sacrificing comfort or control. Robust workshop fit and straightforward integration The tool’s pneumatic design ensures straightforward integration into established compressed-air tool fleets and offers proven resilience under continuous operation. The 6 mm collet capacity provides compatibility with a wide range of small-diameter grinding and sanding accessories commonly used for finishing tasks. As a reliable Vertex product, the VAG-604 represents a practical option where affordability and dependable performance are required, making it suitable for metalworking shops, maintenance departments and production lines seeking a compact straight grinder. Choose the Vertex VAG-604 for efficient, ergonomic finishing—contact Metav Werkzeuge in Emmerich for availability and expert guidance. Technical data Article number: VAG-604 GTIN: 4061905085079 Brand: Vertex Product type: Pneumatic straight grinder ECLASS: 21060101 Facts Speed: 22,000 r.p.m. Weight: 0.6 kg Length: 175 mm Collet capacity: 6 mm Special features Pneumatic operation Cost-effective model Compact design for confined spaces Suitable for finishing and deburring tasks FAQ What is the maximum speed of the tool? The Vertex VAG-604 pneumatic straight grinder runs at 22,000 r.p.m., offering high-speed operation for efficient finishing. What collet diameter does it accept? The VAG-604 features a 6 mm collet capacity suitable for small grinding and sanding accessories. How heavy and how long is the grinder? The Vertex VAG-604 weighs 0.6 kg and has a length of 175 mm, designed for comfortable handling and access in tight areas. What type of drive does this tool use? This model is pneumatically driven, making it compatible with standard compressed-air tool setups. Which product identifiers are relevant for ordering? Refer to the SKU VAG-604 and GTIN 4061905085079 when enquiring about the Vertex pneumatic straight grinder Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6 mm Pneumatic File 3,700 Cycle/min, 175 mm Length - Vertex
Take advantage of the combination of fast finishing, compact handling and wide material compatibility for efficient workshop results; order the VAG-318 directly via Metav Werkzeuge or ask our consultants for application advice. VAG-318 Pneumatic file with 6 mm collet and 3,700 strokes/min — Vertex The VAG-318 is a compact pneumatic file designed for precision shaping and finishing in metalworking, woodworking, shoemaking and mould maintenance. 6 mm collet for standard file bits 3,700 strokes per minute performance Lightweight 1.25 kg housing for ease of handling Compact 175 mm length for tight spaces Fast material removal that keeps production moving With a rated 3,700 strokes per minute, this air-powered finishing tool accelerates stock removal and produces a consistent surface texture across different substrates. The high stroke rate translates directly into shorter processing times for deburring and profiling tasks on metal and wood, while the steady reciprocating action supports controlled finishing on shoe components and moulds. For workshops focused on throughput, the measurable increase in cycle speed offers a clear efficiency gain without complex setup. Precision access in confined or detailed workpieces The short 175 mm overall length and balanced mass make the tool particularly suitable where space is limited or fine control is required. The 6 mm collet accepts standard file bits, enabling straightforward replacement and compatibility with widely used consumables. At 1.25 kg, the unit reduces operator fatigue during extended use, improving repeatability when shaping edges or working on delicate contours. These physical attributes provide practical benefits in everyday workshop tasks where accuracy matters. Simple integration and consumable compatibility Designed as a pneumatic tool, the VAG-318 integrates with standard compressed-air systems commonly found in industrial and small-scale workshops, allowing quick adoption without electrical modifications. The standard collet size means common file inserts are compatible, simplifying inventory and reducing downtime for part changes. This compatibility supports a smoother workflow and helps maintain consistent quality across varied jobs, from prototype finishing to repeat production runs. Reliability, ergonomics and workshop productivity As a tool from Vertex, the product combines focused design for finishing tasks with handling features that support continuous operation. The compact form factor and measured stroke rate reduce the need for multiple specialised tools, streamlining the toolset required at the bench. Alongside tangible productivity improvements, users gain confidence from consistent performance and adaptable use across metal, wood, shoe and mould applications, contributing to a dependable everyday workflow. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VAG-318 into the workshop or to request detailed application guidance from our consultants Technical data Article number: VAG-318 GTIN: 4061905083464 Manufacturer: Vertex Facts Stroke rate: 3,700 strokes per minute Collet / shank: 6 mm Weight: 1.25 kg Length: 175 mm Applications & features Tool type: pneumatic file Suitable for: metal, wood, shoes, moulds FAQ What file bit shank size does the tool accept? The VAG-318 uses a 6 mm collet and accepts standard 6 mm shank file bits for straightforward replacement. Which materials can be processed with this pneumatic file? The tool is suitable for metal, wood, shoe materials and moulds, providing versatile finishing across workshop applications. How fast does the tool operate in typical use? Rated at 3,700 strokes per minute, the VAG-318 delivers high-frequency reciprocating motion for efficient material removal and consistent surface finish. Is the tool suitable for tight or confined spaces? Yes. With a compact 175 mm length and a lightweight design, the file is intended for precise work in restricted areas. What is the model and manufacturer information for replacement parts? Replacement parts and consumables can be specified using the SKU VAG-318 and Manufacturer Vertex; use these references when enquiring about compatible file bits. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com