Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
60mm LED Signal Light Waterproof Bright IP54 - Vertex
Combining IP54 ingress protection with a compact 60 mm diameter and a robust, high-visibility LED, this unit delivers dependable status indication in damp or dusty industrial environments. Secure supply and consultation are available through Metav Werkzeuge for straightforward procurement and reliable after-sales advice. VLED-5SL LED signal light — waterproof, high-visibility indicator (Vertex) The VLED-5SL is a compact LED signal light designed for machine status and panel indication in industrial settings, offering splash protection and strong visual presence for control stations and production lines. Robust IP54 protection against dust and splashes Compact 60 mm diameter fits tight mounting spaces High-brightness LED for clear visual signalling Durable construction; ideal for industrial use Assured visibility to reduce operational errors The unit’s high-brightness LED ensures unmistakable visual signalling across noisy production floors and varied lighting conditions, supporting faster recognition of machine states and reducing the risk of missed alarms. With IP54 protection, the indicator maintains functionality where splashes and coarse dust are present, contributing to continuous operation and fewer interruptions. Clear indication helps streamline workflows and supports compliance with workplace safety routines without requiring complex electrical upgrades. Space-saving design that simplifies installation A small footprint with a 60 mm diameter makes this signal lamp suitable for retrofitting into existing panels and machine housings where space is limited. At 0.77 kg net weight, the device is lightweight enough for straightforward handling while remaining substantial for stable mounting. The compact form factor reduces the need for extensive panel modifications, shortening installation time and lowering disruption to production when integrating additional visual status cues. Built for industrial use with straightforward lifecycle benefits Manufactured for demanding environments, the device combines a robust casing with easy-to-recognise light output, minimising maintenance intervals and replacement complexity. The VLED-5SL serves typical roles such as machine status indication, safety signalling and control-panel alerts, offering a practical balance between durability and clarity. Its classification and traceability support procurement processes and asset management in industrial facilities, helping to maintain predictable operational costs and supply continuity. Contact Metav Werkzeuge for procurement from our Emmerich quality hub and tailored advice on integrating Vertex signal indicators into production setups Technical Data Article number: VLED-5SL Manufacturer: Vertex GTIN: 4061905093999 ECLASS: 27110631 ETIM: EC001959 Core data Diameter: 60 mm Weight: 0.77 kg Protection class: IP54 Features Waterproof and bright High-visibility LED indicator SKU: VLED-5SL FAQ What protection does the unit offer against water and dust? The indicator features an IP54 rating, which means the housing resists dust ingress to a limited degree and protects against water splashes from any direction, suitable for many indoor industrial applications. Is the device suitable for retrofitting into existing control panels? Yes. The compact 60 mm diameter and moderate weight make the unit appropriate for retrofits and tight mounting spaces where minimal panel modification is preferred. Can the VLED-5SL be used for safety signalling on machines? The VLED-5SL is designed for clear machine status and safety signalling in production environments; suitability should be confirmed against site-specific safety standards and application requirements. How does the VLED-5SL perform in harsh production areas? With a rugged housing and IP54 protection, the device withstands common workshop conditions such as dust and splash exposure, providing reliable indication with low maintenance needs. Where can the Vertex VLED-5SL be procured for industrial projects? Metav Werkzeuge supplies the Vertex VLED-5SL and can advise on selection and integration to match specific production requirements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60mm LED Signal Light Waterproof Bright, IP54 - Vertex
Compact, IP54-rated LED signalling with a Ø60 mm housing and robust 0.7 kg construction ensures reliable visual status indication in harsh environments; order the VLED-3SL directly via Metav Werkzeuge or consult the Metav advisors for specification matching and supply. VLED-3SL LED signal light — Vertex, IP54 protection, compact Ø60 mm The VLED-3SL LED signal light is a compact, IP54-rated signalling device designed for industrial control panels and machinery, offering high-visibility indication in environments exposed to dust and splashing water. IP54 protection against dust and splash High-intensity LED signalling Compact Ø60 mm housing Robust 0.7 kg industrial design Consistent visual signalling for demanding workflows The unit delivers clear visual indication through high-intensity LED illumination that remains legible under bright ambient light and factory conditions. Thanks to the IP54 rating, the device is protected against limited dust ingress and splashing water, which reduces the likelihood of signalling faults in routine production environments. This reliability supports continuous process monitoring and contributes to smoother machine operation by minimising unclear status signals and downtime. Compact footprint that simplifies installation planning With a Ø60 mm housing and a compact profile, the signal beacon occupies minimal panel space, enabling denser arrangement of indicators and controls within existing switchgear or control cabinets. The comparatively light 0.7 kg mass supports secure mounting without imposing significant load on panels or brackets. The compact design therefore aids efficient control layout and facilitates retrofitting into systems where space is constrained, while maintaining robust signalling performance. Durable design aimed at long-term operational uptime Constructed for industrial settings, the device combines a resilient enclosure with high-visibility LEDs to provide dependable service over extended operating periods. The unit’s resistance to environmental influences and mechanical resilience reduces the need for frequent replacement, contributing to lower maintenance intervals and predictable operational costs. Manufactured under the Vertex name, the product aligns with established industrial quality expectations and supports steady production workflows. Discuss the Vertex VLED-3SL IP54 LED signal light with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and arrange supply Technical data Article number: VLED-3SL GTIN: 4061905084102 Brand: Vertex Facts Diameter: 60 mm Weight: 0.7 kg ECLASS: 27110631 ETIM: EC001959 Special features Protection rating: IP 54 Description: LED signal light Marketing note: water-resistant and bright SKU: VLED-3SL FAQ What environments is the signal light suitable for? The VLED-3SL is intended for industrial environments such as control panels and machinery areas where IP54 protection against dust and splashing water is required. How does the IP54 rating affect performance? An IP54 rating means the enclosure provides protection against limited dust ingress and splash water, helping the VLED-3SL maintain reliable signalling in exposed workshop conditions. What is the installation footprint of the unit? The unit features a Ø60 mm housing that is optimised for compact panel mounting and space-conscious control layouts. Is the device heavy to handle during installation? At approximately 0.7 kg, the signal light is sufficiently robust while remaining light enough for straightforward mounting in standard control panels. How can the VLED-3SL be ordered or specified for a project? Specification and ordering for the Vertex VLED-3SL can be arranged through Metav Werkzeuge; refer to the SKU VLED-3SL and GTIN 4061905084102 when placing enquiries. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60mm Precision Grinding Vice With Screw Clamp, 0-32mm Jaw Opening - Vertex
Reliable performance, compact dimensions and a secure screw clamp ensure precise workholding for grinding and finishing tasks; benefit from a jaw opening of 0–32 mm and a compact 60 x 90 x 50 mm footprint. Order through Metav Werkzeuge or contact our consultants for tailored advice. V-VE20 Precision Grinding Vice with Screw Clamp (Vertex) — 0–32 mm Jaw Opening A V-VE20 precision grinding vice engineered for accurate clamping of small workpieces in surface grinding and finishing applications. Precision grinding vice design Secure screw clamp mechanism Jaw opening 0–32 mm Compact 60 x 90 x 50 mm footprint Accurate workholding for fine finishing The vice is designed to deliver consistent, precision clamping during grinding operations, reducing part movement and rework. Its screw clamp provides a firm hold while allowing controlled pressure for delicate components. With a jaw opening of 0–32 mm, the vice accommodates a variety of small workpieces, enabling stable contact and repeatable positioning across batches. Clear mechanical contact between the jaws and the workpiece minimises vibration and supports consistent surface quality. Faster setups and reliable repeatability A compact vice simplifies machine table layout and shortens setup time, contributing to improved throughput. The simple screw mechanism reduces adjustment steps and promotes repeatability, so successive parts are held in nearly identical positions. This predictability lowers the risk of scrapped parts and streamlines the production process in toolrooms and small series manufacturing where time and consistency are critical. Small footprint with robust handling Measuring 60 x 90 x 50 mm and weighing 1.62 kg, the unit occupies minimal table space while remaining sturdy enough for workshop use. The compact dimensions make it suitable for tight fixtures and confined machine tables without sacrificing clamping integrity. The vice’s design focuses on a stable contact geometry to protect finished surfaces and support precise grinding operations over repeated cycles. Practical applications and workshop fit Ideal for surface grinders, bench work and metrology-preparation tasks, this vice supports precise alignment and finishing of small components. Its straightforward mechanical design is familiar to machinists and fits standard clamping workflows, making it an efficient addition to setups where consistent surface finish and dimensional accuracy are priorities. The vice is particularly useful where controlled pressure and small-jaw capacity are required for high-quality results. For immediate supply and expert guidance on the Vertex V-VE20 precision grinding vice, contact Metav Werkzeuge — specialists in precision tools and workshop equipment; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 — our team will advise on compatibility and delivery options. Technical data Article number: V-VE20 GTIN: 4061905083990 ETIM: EC002173 ECLASS: 21020601 Facts Jaw opening: 0–32 mm Dimensions: 60 x 90 x 50 mm Weight: 1.62 kg Special features Precision grinding vice With screw clamp Brand: Vertex FAQ What is the maximum jaw opening of the vice? The vice provides a jaw opening of 0–32 mm, which suits small workpieces and precision grinding tasks. Can the V-VE20 be used on any surface grinder? The V-VE20 precision grinding vice is designed for standard surface grinder tables and bench setups; ensure table clamps or fixture points match the vice base dimensions. How does the screw clamp affect workpiece safety? The screw clamp mechanism offers controlled clamping force to secure parts while minimising deformation, supporting consistent surface finishes with the V-VE20 vice. Is the vice suitable for production repeatability? Yes, the vice’s mechanical design promotes repeatable positioning and stable clamping, beneficial for short-run production and finishing operations. What are the vice dimensions and mass for fixture planning? Dimensions are 60 x 90 x 50 mm and the weight is 1.62 kg, useful for assessing table space and load capacity. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60mm Pull Stud BT40 With 45° Shank, M16 Thread, 4mm Through Hole, JIS B 6339 - TECWERK
Take advantage of a compact solution that combines a BT40 taper, an M16 thread and a 45° conical seat with a 4 mm bore for stable, repeatable clamping. Order the TECWERK pull stud directly via Metav Werkzeuge or contact our consultants for application advice. Pull Stud JIS B 6339 BT40 with 45° bore (M16) — TECWERK A Pull Stud JIS B 6339 BT40 with 45° bore engineered for secure tool clamping in BT40 spindles, designed for reliable engagement and straightforward installation BT40 taper for standard toolholders M16 thread for secure clamping 45° conical seat with 4 mm bore Consistent clamping accuracy for productive machining The combination of a BT40 taper and an M16 threaded stem provides a mechanically stable interface that reduces axial play and runout. A precise seat geometry ensures repeatable axial location of the toolholder in the spindle, which in turn supports consistent machining tolerances and prolonged cutter life. The compact design is suitable where a reliable connection between spindle and toolholder is required without additional adapter work. Conical seat and bore support reliable retention The 45° conical seat creates an immediate axial datum between holder and spindle, while the 4 mm bore allows engagement of puller or retention devices where required. This feature set simplifies removal and handling during tool changes and maintenance. The conical seat geometry distributes clamping forces evenly, helping to maintain concentricity under cutting loads and lowering the likelihood of premature wear on mating surfaces. Clear dimensional data for easy compatibility checks Essential dimensions are provided for quick verification: overall length L1: 60 mm, functional length L2: 35 mm, shank diameters d1: 15 mm, d2: 10 mm, d3: 17 mm. These nominal values enable a straightforward compatibility assessment with existing toolholders and retention systems. Where spindle and tooling standards are critical, matching the taper form and thread size is the primary check to ensure safe operation. Robust choice for workshop stocking and maintenance A standardised pull stud streamlines toolroom logistics: one compact part can service multiple cutters and holders that accept BT40 tapers and M16 threads, reducing downtime and simplifying inventory management. The simple geometry and clear dimensions support quick inspection and replacement during scheduled maintenance, contributing to a dependable production flow and predictable machine availability. For procurement of TECWERK pull studs or to confirm fitment for a specific toolholder, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to arrange delivery from stock or to request technical clarification. Technical data Article number: 2000832723NW Manufacturer: TECWERK Product type: Pull stud Taper: BT40 Thread: M16 Measurements L1: 60 mm L2: 35 mm d1: 15 mm d2: 10 mm d3: 17 mm Bore Ø: 4 mm Seat angle: 45° Special features MAS BT 40 45° · with bore Label: Anzugsbolzen JIS B 6339 BT40 with bore Packaging unit: 1 FAQ Which taper and thread does this pull stud use? The Pull Stud JIS B 6339 BT40 with 45° bore by TECWERK features a BT40 taper and an M16 thread (SKU 2000832723NW). What are the key dimensions to check for fitment? Check L1: 60 mm, L2: 35 mm, and diameters d1: 15 mm, d2: 10 mm, d3: 17 mm when assessing compatibility for the Pull Stud JIS B 6339 BT40 with 45° bore. What is the purpose of the 4 mm bore in the stud? The 4 mm bore in the Pull Stud JIS B 6339 BT40 with 45° bore permits engagement with pullers or retention tools and assists in controlled removal and handling during tool changes. How does the 45° seat affect machining performance? The 45° conical seat on the Pull Stud JIS B 6339 BT40 with 45° bore provides a defined axial datum and uniform load distribution, helping to preserve concentricity under cutting forces. Is this pull stud suitable for use in high-speed operations? The Pull Stud JIS B 6339 BT40 with 45° bore is designed as a standard BT40 clamping component; suitability for very high spindle speeds depends on overall toolholder balance and machine specifications—verify balancing requirements before application. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
60mm Tool Holder For Boring Bars E2 With 20mm Bore, Internal And External Coolant, DIN 69880 - TECWERK
Take full advantage of stable clamping, standardised shank compatibility and integrated coolant routing to reduce set-up time and increase tool life. The combination of Form E2 geometry, a 20 mm clamping diameter and DIN 69880 conformity supports predictable concentricity and efficient machining. Order the TECWERK tool holder E2 directly via Metav Werkzeuge or ask our consultants if needed. TECWERK tool holder for drill bars E2 — VDI30, 20 mm clamping, DIN 69880 The TECWERK tool holder E2 is a VDI30 shank tool holder designed for secure clamping of drill bars with internal and external coolant supply, suitable for precision drilling tasks in production and workshop environments. Form E2, VDI30 shank compatibility 20 mm clamping diameter for drill bars Internal and external coolant supply No shortening of drill bar required Engineered stability for repeatable concentricity and reduced set-up The holder's Form E2 geometry and VDI30 interface ensure rigid seating and consistent axial alignment, which reduces runout and improves hole quality. With a defined 20 mm clamping diameter and compliance to DIN 69880, the design cuts down on trial-and-error during set-up, thereby lowering scrap rates and machine downtime. The cylindrical shank supports straightforward insertion and locking in standard tool turrets, translating technical specifications directly into measurable productivity gains. Coolant routing that prolongs tool life and improves chip control Equipped with both internal and external coolant supply, the holder promotes effective lubrication and targeted cooling at the cutting edge, helping to reduce thermal stress and extend the service life of expensive drill bars. Better coolant management also improves chip formation and evacuation, which benefits surface finish and tool stability. These features are especially valuable for medium- to high-volume drilling operations where thermal consistency and chip control deliver consistent cycle times. Workshop compatibility and efficient handling for everyday use Built for use with drill bars and featuring a cylindrical shaft, the holder fits common spindle and turret systems that accept VDI30 interfaces. Key dimensions such as the clamping diameter and shank tolerances are specified to support quick checks during incoming inspection and to simplify inventory matching across similar tool holders. The fact that no shortening of the drill bar is necessary reduces preparatory labour and helps maintain original tool geometry, improving repeatability across batches. For tailored technical advice or to place an order for the TECWERK E2 tool holder, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants can confirm compatibility and delivery options. Technical data Article number: 2000833675NW Product type: Tool holder for drill bars Manufacturer: TECWERK Form: E2 Packaging unit: 1 Core data Clamping diameter d2: 20 mm d1: 30 mm d6: 68 mm d8: 55 mm h1: 28 mm h2: 30 mm l3: 22 mm l6: 60 mm Standard: DIN 69880 Special features Internal and external coolant supply For drill bars Cylindrical shank No shortening of drill bar necessary Not through-bored FAQ What drill bar diameter does the holder accept? The holder accepts drill bars with a clamping diameter of 20 mm as specified for this TECWERK tool holder (SKU 2000833675NW). Is the holder compatible with VDI tool turrets? Yes, the unit features a VDI30 shank interface and is designed for use in standard VDI30 turrets and spindles. Does the design support coolant to the cutting zone? The holder provides both internal and external coolant supply, which supports effective cooling and chip control at the cutting zone. Will the drill bar require shortening before mounting? No shortening of the drill bar is required for correct operation with this holder, preserving tool length and geometry. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
60mm Tool Holder For Boring Bars E2 With Through Coolant, 10mm Shank, DIN 69880 - TECWERK
Take advantage of precise VDI30 clamping, a 10 mm clamping diameter and through‑coolant drilling for uninterrupted boring operations — combine reliable interface standards with time‑saving setup. Order the holder directly via Metav Werkzeuge or consult the Metav technical team for application advice. TECWERK E2 tool holder for boring bars — VDI30, through‑coolant The TECWERK E2 tool holder for boring bars secures a 10 mm boring bar in a VDI30 interface and supplies both internal and external coolant for precision metalcutting applications. Form E2 for VDI30 interface Through‑coolant, drilled design No shortening of boring bar required Continuous coolant flow for stable machining results The drilled, through‑coolant design ensures a constant supply of cutting fluid directly to the tool tip, reducing heat build‑up and extending tool life. By maintaining effective lubrication and chip evacuation, the clamping system supports longer uninterrupted cycles and better surface finish on turned or bored bores. This results in measurable process stability and reduces the need for corrective rework in serial production. Solid VDI30 interface and secure 10 mm clamping A standard VDI30 interface paired with a 10 mm clamping bore provides a repeatable mechanical connection that is widely supported in lathes and tool posts. The Form E2 seating aligns the holder precisely, minimising run‑out and ensuring concentricity for high‑accuracy operations. This combination of interface and clamping diameter gives workshop managers a dependable basis for predictable tolerances across lots. Faster setup without shortening boring bars The holder’s design removes the need for shortening of the boring bar prior to installation, which saves assembly time and preserves bar stock. The drilled execution accommodates both internal and external coolant circuits, simplifying tool changes and reducing downtime between part programs. For process engineers, this translates into higher machine availability and a more economical use of tooling assets. Compatibility and standards that simplify procurement Built to DIN 69880 dimensions and matching common VDI tooling systems, the holder is compatible with standard boring bars featuring a cylindrical shank. The standardised form factor eases inventory management and enables straightforward replacement planning. For shops aiming to rationalise toolholders and reduce supplier complexity, this holder integrates cleanly into existing tool philosophies. Contact Metav Werkzeuge in Emmerich for tailored advice, availability and reliable supply of TECWERK tool holders — technical consultation and prompt delivery from the Metav team are available to support production planning Technical data Article number: 2000833672NW Product type: Tool holder for boring bars Form: E2 Standard: DIN 69880 Dimensions / Core data Clamping diameter d2: 10 mm h1: 28 mm d1: 30 mm d8: 55 mm l6: 60 mm h2: 30 mm l3: 22 mm d6: 68 mm Special features Through‑drilled design: yes Internal and external coolant supply Compatible with boring bars Cylindrical shank No boring bar shortening required FAQ How does the coolant supply work with this holder? The holder features a through‑drilled design that permits both internal and external coolant supply; coolant is delivered directly to the tool tip to improve lubrication and chip evacuation. Is the holder compatible with standard VDI toolposts? Yes — the clamping interface is VDI30, conforming to DIN 69880 standards for straightforward integration into VDI tool systems. Can the boring bar be used as supplied or must it be shortened? Shortening is not necessary; the design allows installation of the boring bar in its supplied length, reducing setup time and preserving stock. Which clamping diameter is supported? Clamping diameter is 10 mm, suitable for cylindrical boring bars with that shank size. Is this holder suitable for high‑precision production runs? The standardised Form E2 seating and VDI30 interface provide stable clamping and reduced run‑out, supporting repeatable, precision machining. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
60mm Vertical Clamp With Angle Base Size 2, Max Hold 1200 N - AMF
Take advantage of the compact size, reliable holding force and straightforward mounting options to maintain stable workholding in fixtures and jigs. Order directly via Metav Werkzeuge or request a detailed quote for integration into production workflows. Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF – Vertical clamp, angled foot, size 2, robust holding The Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF is a vertical clamping element designed for secure, repeatable workholding in jigs, fixtures and machine set-ups where space and stability are critical Vertical clamp, size 2 with angled foot Holding force 1,200 N Maximum pressing force 1,000 N Pressure screw M6 x 35 Consistent clamping performance for reliable production The vertical clamping element delivers stable holding force under intermittent loads, with a specified holding force of 1,200 N and a maximum pressing force of 1,000 N, ensuring components remain immobile during machining or inspection. These figures describe the mechanical capacity and help assess cycle reliability: the holding value designates the sustained grip, while the pressing force indicates the maximum actuation load the unit can tolerate. For production planners, this translates into predictable fixture behaviour, reduced rework and fewer stoppages owing to part movement. Compact angled foot for flexible fixture design The integrated angled foot provides a low-profile mount that simplifies positioning in confined jigs and on modular tooling plates. Key dimensions support straightforward planning: H1 167 mm overall height reference, L1 77 mm base length and aileron-related measures for accurate siting. The supplied pressure screw M6 x 35 enables secure actuation without additional custom fasteners. These physical details assist in CAD integration and reduce trial‑and‑error during assembly, allowing the clamping element to be incorporated into space-constrained set-ups while maintaining ergonomic access for actuation and inspection. Practical compatibility and application contexts Designed as a general-purpose vertical clamp for clamping technology applications, the unit suits short-run and serial production tasks where repeatability and compactness matter. The size designation indicates a medium-small profile appropriate for small fixtures, component testing rigs and manual assembly stations. Where higher clamping forces are unnecessary, the clamp provides an efficient balance between grip and footprint, supporting quicker changeovers and simpler fixture layouts. Material-specific recommendations cannot be inferred from the data provided; selection should be confirmed against the component material and cutting or handling forces expected in the process. Request a tailored quotation or technical datasheet from Metav Werkzeuge for integration planning and spare-part matching; Metav Werkzeuge can advise on fixture compatibility and delivery from stock in Emmerich. Technical Data Article number: 4123590120NW Product type: 6803 Label: Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF Manufacturer: AMF Facts Size: 2 Maximum pressing force: 1,000 N Holding force: 1,200 N Pressure screw: M6 x 35 H1: 167 mm L1: 77 mm Special features With angled foot a [°]: 105 Packaging unit: 1 A [mm]: 6 B [mm]: 41 C [mm]: 20 D [mm]: 6.1 E [mm]: 25 F [mm]: 6 H [mm]: 60 I [mm]: 12 K [mm]: 6 M [mm]: 25.5 N [mm]: 37 O [mm]: 5 P [mm]: 32 FAQ What is the primary application for this vertical clamp? The vertical clamp is intended for secure workholding in jigs, fixtures and machine set-ups where a compact size 2 clamp with an angled foot provides space‑efficient mounting and reliable part retention. Which forces should be considered when specifying the clamp for a fixture? Consider the holding force of 1,200 N and the maximum pressing force of 1,000 N as the key mechanical parameters when designing fixtures with this AMF vertical clamp (SKU 4123590120NW). Is the pressure screw included and what are its specifications? The unit is supplied with a pressure screw M6 x 35, which enables direct installation and actuation without additional fasteners for many standard fixtures. Can this clamp be integrated into existing modular tooling plates? Yes, the angled foot and the compact footprint make the clamp suitable for integration into modular plates; plan using the provided dimensional values such as H1 167 mm and L1 77 mm for precise CAD placement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm x25mm x25mm Adjustable Permanent Magnet Positioner 150N Holding Force, 450°C Max - TECWERK
Take advantage of the combination of compact dimensions, an adjustable holding force of 150 N and a high specified operating temperature to secure small components reliably in confined workspaces; order directly via Metav Werkzeuge or ask our consultants for further assistance. Permanent magnet positioner 60 x 25 x 25 mm (adjustable, 150 N) – TECWERK A compact permanent magnet positioner 60 x 25 x 25 mm designed for adjustable holding and repeatable positioning in light assembly, fixturing and fabrication tasks. Compact 60 x 25 x 25 mm design Adjustable holding force up to 150 N Max magnet operating temperature 450 °C 125 mm total length for improved reach Secure clamping in tight assembly spaces The small footprint and compact dimensions make this positioner well suited where bench space or access is restricted. The device provides an adjustable magnetic hold that is specified up to holding force 150 N, enabling a controlled balance between grip and repositioning. This means delicate parts can be held without excessive force while heavier small components remain fixed during machining or alignment. The mechanism is designed for straightforward integration into jigs and light fixtures, making setup times predictable and repeatable. Performance under elevated temperatures and finishing processes The unit is specified with a max temperature 450 °C for the magnet and a coating curing temperature 200 °C, which supports use in processes that involve elevated heat during surface treatments or localised thermal exposure. These figures indicate the positioner has been engineered for environments where thermal stability is required; the magnetic properties and the surface finish parameters are documented to help plan process windows. The device is manufactured by TECWERK, and the technical specifications allow engineering teams to assess suitability for applications involving heat and post-process painting or coating. Efficient workflow integration and handling With a 125 mm total length, the positioner provides additional reach for positioning without sacrificing control. The adjustable design promotes faster part swaps and reduces the need for multiple different fixtures. Supplied as a single unit packaging, it is ready for immediate deployment into prototyping benches, small-series production or repair workshops. Documentation and clear numeric specifications support procurement and inventory processes, while the compact, robust design minimises the maintenance overhead typically associated with mechanical fixturing. For reliable, small-scale clamping with clear technical specifications, request the TECWERK permanent magnet positioner from Metav Werkzeuge and consult our product specialists for integration advice. Technical data Article number: 4000832285NW Brand: TECWERK Product type: Permanent magnet positioner Packaging unit: 1 Facts Dimensions: 60 x 25 x 25 mm Total length: 125 mm Holding force, max: 150 N Max magnet operating temperature: 450 °C Coating curing temperature: 200 °C Special features Adjustable execution Compact design for tight spaces Suitable for light assembly and fixturing Single unit delivery FAQ What applications is this positioner suitable for? The TECWERK positioner is suitable for light assembly, small-scale fixturing and fabrication tasks where a compact, repeatable magnetic hold is required; its specifications support use in workshops and bench operations. How is the holding force adjusted? Adjustment is achieved via the built-in adjustable mechanism; the holding force can be set up to a maximum of 150 N on the 4000832285NW unit to match the workpiece and process requirements. Can the magnet withstand elevated temperatures during coating or welding? The magnet is specified for a maximum operating temperature of 450 °C and the coating curing temperature is 200 °C, allowing assessment for heat-exposed processes when planning production steps. What are the exact dimensions and reach of the unit? The device measures 60 x 25 x 25 mm with a total length of 125 mm, providing compact support with additional reach for positioning tasks. How is the product supplied? The permanent magnet positioner is delivered as a single unit (packaging unit 1), ready for immediate use in bench or small production setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
60x30mm Mounting Bracket for LED Lamps, Aluminium - Vertex
Take advantage of a compact solution that combines precise dimensions and low weight for efficient LED installations; the slim profile and 60×30 mm footprint ensure space-saving mounting while the light 0.16 kg mass reduces load on fixtures. Order the bracket directly via Metav Werkzeuge or contact our consultants for tailored advice. Vertex V-22 mounting bracket 60×30 mm for LED lamps The V-22 mounting bracket is a compact mounting solution for LED lamps, designed for tidy, space-saving installations in workshops, retail and industrial lighting setups 60×30 mm compact mounting angle Lightweight at 0.16 kg Designed for LED lamps Space-saving mounting that simplifies installation The mounting bracket offers a compact 60×30 mm footprint that supports tidy fixture placement where room is limited. Its slim profile reduces visual clutter and allows luminaires to be mounted close to surfaces or within narrow profiles, which is particularly useful in retrofit projects and confined installations. By keeping dimensions consistent and predictable, assembly planning becomes more straightforward and supplier selection more efficient. Faster assembly and reduced handling effort Thanks to its lightweight design, handling and aligning the bracket during assembly is noticeably easier, reducing time at the workbench and lowering the risk of strain during repeated fittings. The straightforward shape supports standard mounting workflows and speeds up fixture alignment, contributing to measurable time savings on installation jobs. This translates into lower labour input per fitting and a smoother workflow for maintenance and replacement tasks. Versatile use across lighting projects Suitable for use with a wide range of LED lamps, the bracket is intended for both new installations and retrofits in commercial, workshop and display environments. Its neutral form factor enables unobtrusive integration with different fixture types while maintaining reliable support for mounted luminaires. Supplied under the Vertex brand as SKU V-22, the part fits into standard inventory systems and simplifies procurement for trades and facilities teams. Practical considerations for procurement and stock The slim dimensions and low weight make the bracket an economical choice for stocking: it occupies little storage space while remaining easy to pick and dispatch. For buyers seeking consistent quality, the item is available through Metav Werkzeuge, which acts as a quality filter for the European market and supports reliable supply chains. Where specific mounting requirements exist, consultants can advise on compatibility and quantity planning to match project schedules. Contact Metav Werkzeuge today to secure the V-22 mounting bracket for your next LED project and benefit from our stocking and consultation services Technical data SKU: V-22 GTIN: 4061905095276 Type: Mounting bracket 60×30 mm Category: Accessories for LED lamps Manufacturer: Vertex Facts Dimensions: 60×30 mm Weight: 0.16 kg Versions / Features Suitable for LED lamps Image: V-22-main.png Brand: Vertex FAQ What are the exact dimensions of the bracket? The V-22 mounting bracket measures 60×30 mm, providing a compact footprint for tight installations. Is the bracket suitable for commercial LED luminaires? Yes, the accessory is designed for use with LED lamps and fits common lighting applications in commercial and workshop environments. How much does the bracket weigh? The bracket has a weight of 0.16 kg, which aids handling and reduces load on mounted fixtures. Under which SKU is this part listed? This mounting bracket is listed as SKU V-22 and supplied by Vertex. Is an image available to check the design before purchase? An image file is available (V-22-main.png) to assist with visual inspection prior to ordering. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60x35x15mm Lamella Prism Set, 2 Pieces - Vertex
Take advantage of compact dimensions, a paired set configuration and reliable workshop usability to streamline fixture setups; order via Metav Werkzeuge or consult the product experts for application advice. Lamella blocks and prisms VCP-0 — compact clamping prisms by Vertex A Lamella blocks and prisms set designed for secure, space-saving clamping and precise part support in workshop fixtures and jigs. Compact 60 x 35 x 15 mm footprint Supplied as a set of 2 for paired clamping VCP-0 — practical precision accessory Space-saving precision for fixture and jig design The compact format of these components combines a small footprint with repeatable alignment, making them suited to tight fixture layouts where stability matters. With dimensions of 60 x 35 x 15 mm, the units allow close placement to the workpiece without adding bulk to the clamping station. The relatively low weight contributes to easy repositioning in modular setups and supports quick changeovers between jobs while maintaining consistent clamping geometry. Paired configuration for balanced support and stability Delivered as a set of 2, the components enable symmetrical support of cylindrical or prismatic parts, reducing the risk of tilt and improving contact distribution. The lamella-style contact face adapts to irregularities and helps spread clamping forces evenly; this results in secure holding during machining and inspection operations. The set format also simplifies inventory management for recurring fixture builds and ensures that matched components are always available together. Integration into common workshop workflows The item is supplied under the part code VCP-0 and is suitable for incorporation into standard jigs, vice jaws and custom fixture plates. The clear identification via GTIN 4061905084874 assists traceability in procurement and stores. Where rapid setup is required, the small footprint and paired design reduce assembly time while enabling precise positioning; technicians and engineers benefit from easier alignment and fewer adjustments during initial clamping. Practical benefits for small-batch and precision tasks For applications that call for controlled contact and repeatable support — such as finishing, measurement checks or light machining — these prisms provide a compact solution that improves process reliability. The items are a pragmatic addition to a tooling range, offering dependable support without demanding specialised fixturing. Combined with standard clamping hardware, they contribute to faster throughput and a reduction in setup variability. Contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss VCP-0 integration and availability Technical Data Article number: VCP-0 GTIN: 4061905084874 Eclass: 21020803 Brand: Vertex Facts Dimensions: 60 x 35 x 15 mm Weight: 0.48 kg Supplied as set: yes Pieces per set: 2 Special features Type: Lamella prism Category: Vertex Set configuration: paired clamping FAQ What are the exact dimensions of these clamping prisms? The dimensions are 60 x 35 x 15 mm for the Lamella blocks and prisms VCP-0, suited to compact fixture designs. How many pieces are supplied in one set? Each set of VCP-0 is supplied as a set of 2 pieces for paired support and balanced clamping. Is the VCP-0 suitable for precision measurement fixtures? Yes, the VCP-0 Lamella blocks and prisms are intended for stable, repeatable support, making them appropriate for inspection fixtures and measurement aids. Can these prisms be used directly in a vice or must they be mounted? The VCP-0 units are designed for integration into vice jaws and custom fixture plates where compact, paired supports are required. Is the material specified for the prisms? Material is not specified in the available product data for the VCP-0 lamella blocks and prisms Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60x75mm Mounting Bracket For LED Lamps, Accessories - Vertex
Take advantage of the combination of compact dimensions, LED compatibility and lightweight handling for efficient mounting in confined installations. Order the bracket directly via Metav Werkzeuge or ask the specialists for technical clarification. V-54 Mounting bracket 60 x 75 mm for LED lamps (Vertex) A V-54 mounting bracket for secure, space-saving attachment of LED lamps in compact or retrofitted installations Compact 60 x 75 mm design Lightweight at 0.28 kg Compatible with LED lamps Vertex brand accessory Save space without compromise The compact 60 x 75 mm footprint makes this mounting accessory ideal where installation space is limited. Designed as a practical solution for attaching LED fittings, the bracket supports neat routing and discreet placement of luminaires. The reduced spatial demand contributes to quicker planning and a tidier final installation, improving workflow efficiency in both retrofit and new-build projects. Fast integration with LED fixtures Engineered for straightforward alignment, the bracket simplifies mechanical attachment of LED lamps and associated housings. Its design enables repeatable placement and predictable geometry, which reduces alignment time during assembly. For projects that prioritise installation speed and consistent results, this accessory provides a pragmatic way to standardise mounting across multiple luminaires. Easier handling and ergonomic installation At 0.28 kg, the bracket is lightweight yet practical for handling on ladders or in tight spaces. The lower mass reduces installer fatigue during repetitive tasks and streamlines assembly for small teams. Where repeat installations are required, the reduced handling effort can translate into measurable time savings and steadier working conditions on site. Reliable sourcing and workshop-ready logistics Supplied under the Vertex name and distributed via Metav, the accessory benefits from a dependable supply chain geared to industrial and trade customers. Metav’s role as a quality filter for the European market ensures that procurement is backed by decades of expertise, stocked logistics and a wide product range that helps consolidate sourcing for workshops and wholesalers. Contact Metav Werkzeuge for tailored technical information on the Vertex V-54 mounting bracket: email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 for precise specification support Technical data Article number: V-54 GTIN: 4061905088360 Brand: Vertex Facts Dimensions: 60 x 75 mm Weight: 0.28 kg eCl@ss: 27110390 Features Suitable for LED lamps Category: Zubehör Thumbnail available (V-54.png) FAQ Is the bracket suitable for indoor LED luminaires? The V-54 mounting bracket is intended for use with LED lamps and fits compact installations; compatibility should be checked against the lamp housing and mounting points. What are the exact dimensions and weight? Dimensions are 60 x 75 mm and the bracket weighs 0.28 kg. Can the accessory be used with third-party fixtures? The Vertex V-54 mounting bracket can be used with many LED fittings; verification of hole pattern and mounting clearances is recommended before installation. What identifiers should be quoted when ordering? Please quote SKU V-54 and GTIN 4061905088360 when enquiring or ordering the Vertex mounting bracket. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60x75mm Mounting Bracket for LED Lamps, Aluminium Finish - Vertex
Take advantage of the compact 60 x 75 mm format and low weight to simplify LED fixture installations; the bracket combines space-saving support with straightforward handling for quick retrofits. Order the part directly via Metav Werkzeuge or consult our product specialists for application advice. Vertex V-27 Mounting Bracket – Angle 60 x 75 mm for LED Lamps The V-27 is a compact angle bracket designed to secure LED luminaires where space is limited, offering a simple support solution for fixture mounting and retrofitting. Vertex V-27 angle bracket 60 x 75 mm Designed for LED lamps and fixtures Lightweight 0.28 kg for easy handling Space-saving compact installation profile Secure mounting in confined assemblies A dedicated mounting bracket that converts a small footprint into reliable support, the 60 x 75 mm profile is intended for applications where minimal intrusion is essential. The bracket provides a fixed angle support for LED luminaires, enabling installers to position fittings cleanly against panels, housings or mounting rails. Its compact design reduces the need for additional framing and simplifies alignment during installation, which translates into measurable time savings on repetitive fitting tasks. Faster, more efficient installation and handling The bracket’s low mass and modest dimensions mean fewer handling constraints on the workbench and during transport: at 0.28 kg the component is easy to manipulate and aligns quickly in place. Reduced handling time supports more efficient labour cycles, especially for batch installations or retrofit projects. For technicians and workshop managers, the clear advantage is a quicker mounting routine with fewer movements and a reduced need for extra fastening aids, contributing to lower overall installation time per luminaire. Practical stock and logistics advantages for production As an accessory intended specifically for LED lamps, this angle bracket is straightforward to store and issue on demand. The unobtrusive profile aids compact packaging and efficient shelving, which benefits procurement and reduces storage costs in busy workshops. In combination with Metav’s quality-filtered sourcing, the component serves workshops looking for dependable standard parts that streamline assembly and service operations while maintaining consistent quality across batches. Contact Metav Werkzeuge in Emmerich for availability, technical details and tailored advice relating to the Vertex V-27 mounting bracket Technical data Article number: V-27 GTIN: 4061905095092 Category: Accessory for LED lamps Facts Weight: 0.28 kg Dimensions: 60 x 75 mm eCl@ss: 27110390 Special features Suitable for LED lamps Product type: Mounting bracket (angle) SKU: V-27 Thumbnail image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/be/2f/97/63/63972fbec806fb82109e363e/V-27.png FAQ What is the primary application of this mounting bracket? The Vertex V-27 mounting bracket is intended for securing LED luminaires in situations where a compact angle support is required; it is marketed as an accessory for LED lamps. What are the exact dimensions and weight of the bracket? The component measures approximately 60 x 75 mm and has a weight of 0.28 kg as specified for the Vertex V-27. Is the V-27 suitable for retrofit installations? Yes, the compact profile and modest weight make the Vertex V-27 suitable for retrofit work where minimal alteration to the existing structure is preferred. Does the product data specify the material or surface finish? The available product data for the Vertex V-27 does not specify material or coating details; consult the technical documentation for those attributes. How is the bracket classified for procurement and inventory? The bracket is listed as an accessory for LED lamps (eCl@ss 27110390) and supplied under SKU V-27 for inventory and ordering purposes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60x75mm Mounting Bracket For LED Lamps, Zinc-Plated - Vertex
Benefit from a compact and practical mounting solution: the 60 x 75 mm bracket provides a small footprint and lightweight (0.28 kg) handling for straightforward LED lamp installation. Its simple form factor supports consistent alignment and reduces installation time. Order the V-51 directly via Metav Werkzeuge or consult our specialists for tailored application advice. V-51 Mounting bracket 60 x 75 mm for LED lamps by Vertex The V-51 is a compact mounting bracket intended as an accessory for LED lamps, designed to secure fixtures in workshop and industrial lighting applications. Compact 60 x 75 mm footprint Designed for LED lamps Lightweight: 0.28 kg Secure mounting for consistent lighting A reliable bracket reduces the need for rework and keeps luminaires aligned for an even light distribution. The mounting angle functions as a stable interface between the luminaire and its support, enabling secure installation of LED lamps and helping to maintain illumination quality across a workspace. For production environments and service workshops, this stability translates into fewer maintenance interventions and steadier lighting performance, which supports operational efficiency. Space-saving design that simplifies fitting The 60 x 75 mm footprint and compact profile make the fixture suitable for tight mounting locations where larger brackets would be impractical. Its lightweight (0.28 kg) construction eases manual handling during assembly and minimises additional loading on ceilings and supports. Where space is at a premium, the reduced bulk lowers collision risk and simplifies routing of cables and conduits, speeding up installation and saving labour time. Practical application and ordering details for planners This mounting component is classified as an LED accessory and is intended for use wherever a small, dependable bracket is required. For system planners and maintenance teams, confirm hole patterns and fastener sizes to match the luminaire body and mounting substrate; the bracket provides the mounting interface and requires appropriate screws or bolts for a complete fit. Identification for procurement: SKU: V-51, GTIN: 4061905088636. For product provenance and component specification see the Vertex designation included with the item. Contact Metav Werkzeuge to discuss how the Vertex V-51 mounting bracket fits your installation and to arrange supply from our Emmerich warehouse with application guidance from our specialists Technical data SKU: V-51 GTIN: 4061905088636 Category: Accessory for LED lamps Manufacturer: Vertex Core technical data Dimensions: 60 x 75 mm Weight: 0.28 kg ECLASS: 27110390 Special features Application: accessory for LED lamps Type: mounting bracket / mounting angle Classification: workshop and industrial lighting accessory FAQ Is the V-51 suitable for industrial LED fittings? The V-51 mounting bracket is intended as an accessory for LED lamps and is suitable for workshop and industrial lighting fixtures provided the bracket matches the fixture’s mounting points. What are the exact dimensions and weight? The bracket measures 60 x 75 mm and weighs 0.28 kg; refer to SKU V-51 or GTIN 4061905088636 when ordering. How should the bracket be fixed to a surface? Fasten the bracket with appropriate screws or bolts for the substrate and luminaire; ensure correct alignment and secure torque values for a safe installation. How to confirm compatibility with a particular luminaire? Check the luminaire’s mounting hole pattern and clearances against the bracket footprint; compatibility depends on matching those mechanical interfaces. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60x75mm Mounting Bracket For LED Lamps, Zinc-Plated - Vertex
Reliable mounting solution that combines a compact footprint and low weight for fast, efficient LED installation; order the bracket directly via Metav Werkzeuge or consult our specialists for application advice. Vertex V-20 mounting bracket 60 x 75 mm for LED lamps The V-20 mounting bracket provides a compact mounting option for attaching LED luminaires where space is limited, suitable for workshop and commercial installations. Compact 60 x 75 mm mounting bracket Designed for LED lamps and luminaires Lightweight at 0.28 kg Vertex product, SKU V-20 Faster, neater installations in confined spaces The 60 x 75 mm footprint of this mounting bracket reduces the space required behind or beside a fitting, enabling installations where larger brackets would be impractical. The small profile helps keep cable runs and fixation points tidy, which translates into a shorter assembly time on site and fewer follow-up adjustments. At 0.28 kg, the component is lightweight, easing manual handling during fitting and reducing strain during repeated installations, so teams can work more efficiently and focus on completing jobs on schedule. Seamless integration with LED luminaires for reliable results Designed specifically as an accessory for LED lamps, the bracket offers a standardised point of attachment that simplifies alignment and support of modern luminaires. Standard workshop fixings can be used to secure the bracket to existing structures, thereby cutting preparation work and minimising downtime. By standardising the mounting approach, the bracket contributes to consistent visual results and predictable load distribution, supporting professional installations in retail, office or industrial settings. Supply reliability and quality assurance for procurement Sourced from Vertex, the bracket benefits from a clear production lineage and straightforward logistics through Metav's European supply chain. Stocking at the Emmerich warehouse acts as a quality filter and ensures dependable availability for workshop procurement. Choosing this component supports streamlined purchasing: a compact, purpose-built accessory that reduces the need for custom brackets and helps maintain a consistent installation standard across multiple sites. Contact Metav Werkzeuge today to secure Vertex V-20 mounting brackets and benefit from reliable supply and prompt delivery from Emmerich; enquiries can be directed to Metav Werkzeuge for further application guidance. Technical Data Article number: V-20 GTIN: 4061905084317 Product type: Mounting bracket 60 x 75 mm Weight: 0.28 kg Data Dimensions: 60 x 75 mm Weight: 0.28 kg ECLASS: 27110390 SKU: V-20 Special features Suitable for LED lamps Accessory for luminaires Brand: Vertex Category: Accessories for LED lamps FAQ Is the bracket suitable for LED lamps? Yes. The Vertex V-20 mounting bracket is specified as an accessory for LED lamps and is intended to support luminaires in compact installations. What are the exact dimensions and weight? The V-20 measures 60 x 75 mm and weighs 0.28 kg, providing a small footprint and lightweight handling for installers. Can the bracket be used with all types of luminaires? The bracket is designed for LED luminaires; compatibility with specific fittings depends on the luminaire’s mounting points and should be checked against the Vertex V-20 product details. Is outdoor suitability stated for this bracket? Outdoor suitability is not specified in the available product data; for exterior applications, verify environmental protection requirements against the Vertex V-20 specifications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60x75mm Mounting Bracket for LED Lamps, Zinc-Plated - Vertex
Take advantage of the compact 60×75 mm footprint and lightweight construction to achieve tidy, reliable LED lamp installations; order the mounting bracket directly via Metav Werkzeuge or consult the Metav team for procurement advice and specification support. V-52 Mounting Bracket 60×75 mm — Vertex The V-52 is a compact mounting bracket designed for secure attachment of LED lamps in industrial and commercial installations. Mounting bracket 60×75 mm Designed for LED lamp mounting Lightweight at 0.28 kg SKU V-52, GTIN 4061905088438 Space-saving support for clean LED installations A precise mounting solution reduces clutter and simplifies lighting layouts in workshops, production lines and retail displays. The 60×75 mm footprint ensures minimal intrusion into the installation area while providing a stable platform for various lamp housings. By favouring compact supports, project planners gain flexibility in tight spaces and can maintain clear routing for cables and conduits. The design focus on compactness delivers an organised final appearance and helps preserve sightlines in commercial settings where a professional finish matters. Practical benefits for procurement and assembly The bracket’s lightweight nature (approx. 0.28 kg) minimises handling effort during assembly and reduces load on supporting structures. As a plain mechanical accessory, the component is intended to be integrated into existing mounting systems for LED lamps, enabling straightforward stock management and interchangeability. Where exact material specifications are required for load calculations or compliance records, the product data sheet should be consulted; the accessory is supplied under the distinctive Vertex SKU for clear traceability in supply chains and inventory systems. Where this accessory adds value on the shop floor In production and installation environments, dependable small parts accelerate project completion and reduce on-site adjustments. The bracket serves as a consistent option when a simple, space-efficient mounting point is required for lighting modules. Specifying a standardised bracket across multiple installations simplifies maintenance planning and spare-parts provisioning, supporting predictable uptime and orderly asset management. The item’s identification via SKU and GTIN supports digital procurement workflows and ensures accurate ordering across industrial buyers and distributors. For a reliable choice in compact LED mounting, specify the Vertex V-52 and contact Metav Werkzeuge in Emmerich for ordering and procurement guidance. Technical Data Article number: V-52 GTIN: 4061905088438 Intended application: LED lamps Category: Vertex Weight: 0.28 kg Facts Dimensions: 60×75 mm eClass: 27110390 Special features Product type: Mounting bracket Asset filename: V-52.png SKU: V-52 FAQ What is the V-52 intended for? The V-52 is a mounting bracket by Vertex intended for the secure attachment of LED lamps in industrial and commercial installations. What are the bracket’s dimensions and weight? Dimensions are 60×75 mm and the weight is approximately 0.28 kg for the V-52 mounting bracket. Is the material specified for the bracket? Material information is not specified in the product data for the V-52 mounting bracket. How is the product identified for ordering? The accessory is identified as SKU V-52 and GTIN 4061905088438 for procurement and inventory purposes. Can the bracket be used with fittings other than LED lamps? The bracket is described for LED lamp applications; compatibility with other fittings depends on the specific lamp housing and mounting requirements and is not explicitly detailed in the product data. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Carbide Centre Point Fixed 125mm, DIN 806 - Vertex
Combine the durability of a carbide tip, the DIN 806 conformity and a precise 60° marking angle to ensure repeatable, high-quality centre marks in production. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. VLC-113 Centre punch tip — Carbide tip, 60° angle (Vertex) VLC-113 Centre punch tip for accurate centre marking and reliable alignment work in metalworking and toolmaking environments. Carbide tip for high wear resistance 60° angle for precise centre marking Compliant with DIN 806 standard Fixed design for stable positioning 125 mm length for extended reach Durable marking that keeps production running The carbide tip offers hard-wearing performance under repetitive use, providing a longer service life compared with conventional steel points. This translates into fewer tool changes and less downtime, supporting a more efficient workflow in busy workshops. The solid tip material resists deformation during impact, which maintains consistent mark geometry and reduces rework in subsequent drilling or turning operations. Accurate centre marks for reliable machining results A defined 60° angle creates reproducible centre points that help reduce drill wander and improve concentricity in follow-up operations. Conformance to DIN 806 ensures compatibility with established workshop standards and straightforward integration into inspection routines. The optimised geometry supports clean initial impressions on a range of ferrous and non-ferrous workpieces, improving repeatability and dimensional control in serial production. Stable handling and practical dimensions for everyday use The fixed design of the unit provides a secure seating during impact, enhancing positional stability for manual marking or use in mechanical holders. With an overall length of 125 mm, the tool reaches into recessed areas while maintaining a comfortable working envelope on the bench or in jigs. The compact mass contributes to controlled strikes and predictable energy transfer, delivering consistent marking depth without excessive operator effort. Quality that supports workshop confidence Manufactured by a recognised toolmaker, the component combines robust materials with proven design practice to deliver dependable performance. The combination of carbide tip, standardised geometry and industrial-grade construction helps reduce consumable turnover, offering a pragmatic balance of longevity and consistent results for professional toolrooms and maintenance departments. Contact Metav Werkzeuge for tailored advice on integrating Vertex centre punch tips into existing processes or to confirm suitability for specific materials and fixtures — Metav’s specialists are available via info@metav-werkzeuge.com or by phone for technical consultation Technical data Article number: VLC-113 GTIN: 4061905087264 Manufacturer: Vertex Dimensions & weight Length: 125 mm Weight: 0.4 kg Angle: 60° Materials & special features Tip material: Carbide Design: Fixed Standard: DIN 806 Brand: Vertex FAQ What materials is the VLC-113 centre punch tip suitable for? The VLC-113 centre punch tip by Vertex is designed as a hard-wearing marking point; suitability for specific materials should be confirmed against the intended application and strike energy. How does the 60° angle affect drilling preparation? A 60° marking angle produces a defined centre impression that helps reduce drill wander and facilitates more accurate pilot hole location when preparing components for machining. Is the tip replaceable or mounted permanently? This item features a fixed design; the carbide tip is permanently mounted to deliver stable positioning during repeated marking operations. Does the product meet any industry standards? The tool is produced to DIN 806, providing conformity with recognised workshop standards for marking and centre punch geometry. Can this centre punch tip be used in jig or fixture setups? The stable, fixed configuration and the 125 mm length make the component suitable for integration into many jigs and holder systems where a rigid marking point is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Carbide Centre Point Fixed 270mm, DIN 806 - Vertex
Take advantage of the combination of carbide tip durability, DIN 806 standard geometry and a robust fixed design for reliable locating and long service life; order the centre tip directly via Metav Werkzeuge or consult our specialists for application advice. Centre tip VLC-116 (fixed) — Carbide tip, 60° angle, Vertex A fixed centre tip VLC-116 designed as a precision locating element for turning and general workholding, providing durable axial support in machining and assembly operations. Fixed design for robust axial support Carbide tip for excellent wear resistance 60° standard tip angle per DIN 806 270 mm overall length for deep applications Durable carbide construction for consistent locating The VLC-116 is equipped with a carbide tip that provides outstanding wear resistance under repetitive contact and load. The hard tip material reduces deformation at the contact point, which keeps the locating geometry stable over long production runs and minimises rework. As a result, set-up intervals are extended and part repeatability improves, supporting higher throughput without compromising on dimensional accuracy. Standardised angle for predictable mating and interchangeability Manufactured to the DIN 806 specification, the centre geometry features a 60° tip angle that ensures consistent mating with standard lathe centres and housings. That standardisation simplifies tool selection and reduces the need for trial fits, while the defined geometry assists in transmitting axial load predictably. For workshops seeking process reliability, the use of standard angles cuts adjustment time and supports reproducible clamping conditions. Fixed design and extended reach for demanding setups The fixed construction delivers rigid axial support with a low parts count, lowering the risk of loosening or play in heavy-duty applications. With an overall length of 270 mm, the component suits deeper set-ups where extended reach is needed, while the robust build maintains concentricity under load. This combination of length and rigidity makes the item suitable where secure, repeatable support is required across extended workpiece overhangs. Clear handling and long service life simplify maintenance Thanks to the carbide tip and solid construction, the centre tip requires low maintenance and retains functional accuracy across many cycles. Regular inspection is straightforward: check the contact face for visible wear and confirm concentric engagement. The Vertex-crafted component supports predictable downtimes and reduces the frequency of replacements, helping to keep machine uptime high in production environments. For dependable locating with Vertex quality, contact Metav Werkzeuge to discuss the VLC-116 centre tip and receive tailored application guidance from our consultants via info@metav-werkzeuge.com or by phone Technical data Article number: VLC-116 GTIN: 4061905085703 Manufacturer: Vertex Core data Length: 270 mm Tip angle: 60° Weight: 5.7 kg Special features Tip material: carbide Standard: DIN 806 Type: fixed centre tip FAQ What material is used for the tip and how does it benefit machining? The tip of the centre tip VLC-116 is made from carbide, providing high wear resistance and prolonged service life under repetitive contact, which preserves locating accuracy. Is the geometry compatible with industry standards? Yes, the VLC-116 centre tip is manufactured to DIN 806 and features a 60° tip angle for predictable mating with standard lathe centres and fixtures. Can the fixed centre tip be used for deep setups? The 270 mm overall length of the VLC-116 makes it suitable for deeper support applications where extended reach and rigid axial support are required. Is the centre tip designed for heavy-duty use? The fixed design and carbide contact face of the VLC-116 ensure robust axial support and long-term durability for demanding workshop operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Carbide Centre Punch Fixed Tip, DIN 806, 100mm - Vertex
Combining a carbide tip, a 60° geometry and a 100 mm fixed shaft delivers precise, repeatable centre marks with minimal maintenance; order the tool directly via Metav Werkzeuge or consult the Metav team for specification advice. Centre punch VLC-112 — fixed marking tool with carbide tip (Vertex) Centre punch VLC-112 is a fixed marking tool for producing accurate pilot indents and reliable centre marks in professional workshop environments Carbide tip for long-lasting centre marks 60° tip angle for precise positioning Conforms to DIN 806 for standardised quality 100 mm fixed shaft for stable handling Precise, repeatable marking for reliable downstream processing The carbide tip is engineered to retain its profile under frequent use, which supports consistent indentation geometry and aids repeatable drill starts. The 60° tip angle focuses impact energy into a defined point, reducing lateral slip during marking. Compliance with DIN 806 provides an industry-recognised benchmark for dimensions and geometry, simplifying tool selection in standardised production environments. These attributes reduce alignment errors and support higher first-pass accuracy in subsequent machining steps. Robust construction that minimises intervention and downtime A solid, fixed shaft design with a 100 mm overall length provides mechanical stability during hand or machine-supported application. The integral carbide point eliminates a wear-prone interface, lowering the need for frequent part replacements and maintenance interventions. The lightweight 0.2 kg construction ensures manageable handling while maintaining sufficient mass for clear, repeatable impressions. The combination of durable materials and straightforward design contributes to steady availability at the workbench and predictable service intervals. Seamless fit into workshop inventory and procurement workflows Standardised dimensions and the industry code facilitate catalogue management and reordering under the SKU VLC-112. The compact specification and proven materials make the marking tool suitable for integration alongside other precision hand tools and layout equipment. Documentation of technical data supports transparent procurement decisions and enables workshop managers to align the tool with quality-control routines. Supplied by a specialist distributor, the item benefits from centralised stocking that acts as a quality filter for the European market. Choose the Vertex fixed centre punch VLC-112 with a carbide tip for durable, accurate centre marking — contact Metav Werkzeuge for procurement advice and reliable supply from Emmerich (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: VLC-112 GTIN: 4061905084379 ECLASS: 21022304 Manufacturer: Vertex Dimensions & weight Length: 100 mm Tip angle: 60° Weight: 0.2 kg Materials & standards Tip material: carbide Standard: DIN 806 Design: fixed centre punch FAQ What does "fixed" mean for this marking tool? The Vertex centre punch VLC-112 is offered in a fixed design, which means the tip is integral to the shaft and not intended for replacement, favouring stability and consistent impressions. Is the tip material suitable for heavy use? Yes, the tip of the Vertex VLC-112 is made from carbide, a hard material selected for wear resistance and long service life under repeated marking cycles. Which standard does the tool adhere to? The tool conforms to DIN 806, ensuring standardised geometry and compatibility with workshop specifications for centre punches. What are the key dimensions of the tool? The Vertex VLC-112 has a 100 mm overall length and a 60° tip angle; the listed weight is 0.2 kg. What is the intended application for this punch? The Vertex centre punch VLC-112 is designed for precise centre marking and producing pilot indents prior to drilling in professional workshop settings. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Centre Punch Live Tailstock For High Speeds 1500 rpm, MT6A - Vertex
Benefit from the combination of high-speed capability and a runout tolerance of 0.005 mm to secure repeatable concentricity in demanding turning operations; order the component directly via Metav Werkzeuge or request tailored advice from our consultants. VLC-MT6A live centre (MT6A taper) by Vertex — high-speed, 60° point A VLC-MT6A live centre designed for high-speed turning and lathe support, providing a 60° centre point and reliable rotational performance for metalworking applications High-speed capability 1,500 r.p.m Precision runout ≤ 0.005 mm 60° centre point for robust support 380 mm overall length Consistent concentricity for precision turning The live centre delivers a measurable improvement in part accuracy by maintaining a runout of 0.005 mm, which reduces rework and scrap on turned components. This level of precision ensures that concentric features remain within tight tolerances, making the device suitable where axial alignment directly affects surface finish and assembly fit. The design targets repeatable results in batch production and one-off work alike, translating machine performance into verifiable product quality. Durable geometry and installation benefits A 60° centre angle provides a standardised contact geometry that supports a wide range of workpiece profiles while promoting even load distribution at the point of contact. With an overall length of 380 mm, the centre offers extended reach where deeper support is required, without compromising stability. The built-in MT6A taper allows straightforward mounting in compatible tailstocks or adapters, simplifying setup and reducing preparation time before machining operations begin. Operational efficiency and compatibility in the workshop Rated for continuous rotation up to 1,500 r.p.m., the unit is geared towards medium to high-speed lathe work where rotational balance and bearing performance matter. The MT6A specification ensures compatibility with standard spindles and holders used in industrial turning, promoting quick interchangeability and minimal downtime. By combining controlled rotational speed with the verified runout and a defined centre angle, the component helps to streamline production flow and improve first-pass yield on turned parts. Contact Metav Werkzeuge for a tailored consultation on delivery from our Emmerich warehouse and expert advice for integrating the Vertex VLC-MT6A live centre into existing turning processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VLC-MT6A GTIN: 4061905086847 Manufacturer: Vertex Type: MT6A Facts Accuracy / runout: 0.005 mm Maximum speed: 1,500 r.p.m. Centre angle: 60° Length: 380 mm Weight: 15.6 kg Special features Live centre for continuous rotation at high speeds MT6A taper for standard tailstock mounting 60° centre point for conventional turning support Suitable for general lathe operations and concentric support FAQ What level of runout can be expected from this live centre? The Vertex VLC-MT6A live centre specifies a runout of 0.005 mm, ensuring tight concentric accuracy for turning tasks. Is the VLC-MT6A suitable for high-speed lathes? The unit is rated for continuous rotation up to 1,500 r.p.m., making the VLC-MT6A appropriate for medium to high-speed lathe applications within that speed range. Which taper does this centre use for mounting? The centre uses an MT6A taper, which is compatible with standard MT6A tailstocks and holders commonly found in industrial turning setups. How does the 60° centre angle affect workpiece support? A 60° centre angle provides conventional point contact that distributes load effectively and supports a wide range of workpiece geometries during turning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Centre Punch With Interchangeable Tips MT2 Shank Stainless Steel 127mm - Vertex
Take advantage of precise centre marking, robust stainless steel construction, and a MT2 taper that ensures straightforward fitting in standard tailstocks; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Centre punch VLC-312 — Vertex centre punch with interchangeable tips and MT2 taper The Centre punch VLC-312 is a precision marking tool designed for creating consistent, defined centres prior to drilling and machining, suitable for workshop and light industrial applications. Solid stainless steel construction MT2 taper for standard headstocks 60° hardened centre tip Interchangeable tips for versatility Precise marking that reduces drilling errors and rework A defined centre mark shortens setup time and improves first-pass drilling accuracy: the tool delivers high repeatability thanks to its measured tolerance of 0.008, which ensures that marks stay consistent between operations. The 60° tip geometry concentrates force to produce sharp, visible centres on metal and other machinable surfaces, reducing the tendency for drill bits to wander. For production environments where reliability and predictable results matter, this precision marking device contributes directly to process efficiency and lower scrap rates. Durable design built for everyday workshop use Constructed from stainless steel and balanced at a length of 127 mm with a mass of 0.9 kg, the tool provides a solid feel and long service life under normal workshop conditions. The integrated MT2 taper allows secure seating in standard tailstocks or dedicated holders, while the rated rotational capacity of 4,000 r.p.m. supports use in revolving centres where appropriate. Robust materials and a compact form factor reduce maintenance intervals and deliver stable performance in repetitive marking tasks. Interchangeable tips for flexible applications and fast maintenance Equipped with interchangeable tips, the system adapts to different materials and marking requirements without replacing the entire tool. Tips can be swapped quickly to match workpiece hardness or to restore a crisp mark after wear, limiting downtime and keeping production moving. This modularity also reduces inventory needs: one handle accommodates multiple tip geometries, which is especially useful in mixed-production shops. The SKU VLC-312 identifies the exact configuration for spare parts and replacement tips. For reliable, workshop-ready marking select the Vertex VLC-312 and contact Metav Werkzeuge for tailored advice or to secure your supply directly — email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and stock information Technical data SKU: VLC-312 GTIN: 4061905084461 Manufacturer: Vertex Facts Material: stainless steel Length: 127 mm Weight: 0.9 kg Accuracy: 0.008 Maximum speed: 4,000 r.p.m. Tip angle: 60° Taper: MT2 eClass: 21022304 Special features Interchangeable tips included Hardened centre tip Suitable for tailstock mounting Compact, workshop-oriented design FAQ What tip angle does the tool use? The tool features a 60° centre tip, providing a precise and concentrated mark suitable for most drilling preparations with the Vertex VLC-312 centre punch. Is the taper compatible with standard tailstocks? Yes — the device uses an MT2 taper for secure mounting in standard tailstocks and compatible holders. Are the tips replaceable and does the set include spare tips? The design includes interchangeable tips, allowing fast replacement to suit different materials and to restore marking quality; spare tips are available for the VLC-312. What is the maximum recommended rotational speed? The tool is specified for use up to 4,000 r.p.m., where revolving centre applications require controlled rotational speeds. What is the main body material and typical dimensions? The body is made of stainless steel, with a length of 127 mm and weight of 0.9 kg, offering a durable, workshop-ready tool. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Centre Punch With Interchangeable Tips Stainless Steel MT4 Shank 182mm - Vertex
Benefit from the combination of corrosion-resistant stainless steel, a precise 60° tip geometry and economical replaceable tips for dependable centre marking and reduced tooling costs; order directly via Metav Werkzeuge or consult our specialists for application advice. Centre punch tip VLC-314 — 60° precision point with MT4 shank by Vertex Centre punch tip VLC-314 is a machine-ready marking tip designed for accurate centre punches and repeatable positioning in workshop and production environments. Stainless steel construction for longevity 60° tip for accurate centre marking Replaceable tips reduce tooling costs MT4 shank for secure machine mounting Consistent centre marks for reliable machining The 60° tip geometry provides a defined contact profile that reduces drill wander and ensures repeatable start points for machining operations. With an accuracy of 0.008 mm, the component layout remains consistent from part to part, supporting process reliability and lower scrap rates. This marked precision is especially valuable where subsequent drilling or reaming operations require exact centring; the controlled initial indentation simplifies downstream tool guidance and reduces rework. Built for workshop durability and straightforward servicing Manufactured from stainless steel, the unit resists corrosion and maintains dimensional stability under shop-floor conditions, which extends service intervals and lowers life‑cycle costs. The replaceable tips design keeps consumable costs down and shortens maintenance downtime since worn points are exchanged rather than the entire tool. With a length of 182 mm and a robust mass of 2 kg, the tool offers substantial hand‑feel and balance when used in fixtures or machine spindles, delivering a reliable tactile reference during positioning. Secure mounting and controlled operation for machine use The MT4 shank (Morse taper 4) guarantees concentricity and secure seating in compatible spindles and tailstocks, reducing runout during marking cycles. A rated rotational/operational parameter of 2500 rpm indicates suitability for machine-mounted processes where rotational stability is required; the combination of taper fit and mass supports steady contact without chatter. Supplied by Vertex, the design focuses on compatibility with common workshop tooling and on delivering predictable results in repetitive production tasks. For dependable, production-ready centre marking with replaceable tips from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VLC-314 GTIN: 4061905085345 Designation: Centre punch tip with replaceable tips Brand: Vertex Key measurements Length: 182 mm Weight: 2 kg Tip angle: 60° Accuracy: 0.008 mm Max speed: 2500 rpm Materials & features Material: Stainless steel Shank: MT4 (Morse taper 4) Replaceable tips included FAQ What is the tip angle and why does it matter? The centre punch tip VLC-314 features a 60° angle; this geometry creates a stable indentation that helps guide drills and reduces lateral slippage during initial penetration. Can the point be replaced and what are the benefits? Yes, the VLC-314 comes with replaceable tips; swapping worn points preserves the tool body, reduces consumable costs and shortens maintenance cycles in production use. Is the shank compatible with standard machine spindles? The tool uses an MT4 (Morse taper 4) shank for secure seating in compatible spindles and tailstocks, ensuring concentricity and low runout during marking operations. What level of accuracy can be expected for repeat marks? Repeatability is specified at 0.008 mm, so the centre punch tip VLC-314 is suitable where tight positional consistency is required between successive operations. Who manufactures this tool and where is it produced? The product is supplied by Vertex under the SKU VLC-314; Vertex produces precision tooling designed for workshop and industrial applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Live Centre For High Speeds MT4A, 0.005mm Accuracy, 3000rpm - Vertex
Take advantage of a compact, high-speed support solution that combines 0.005 mm repeatability, a 3,000 rpm rating and a standard MT4 taper for reliable lathe workholding; the result is consistent concentricity and fewer rejects during turning operations. Order the VLC‑MT4A live centre directly via Metav Werkzeuge or ask our consultants if needed. VLC‑MT4A Live centre — high‑speed, high‑precision MT4 taper (Vertex) The VLC‑MT4A is a revolving live centre designed to support workpieces in lathe operations where high rotational speed and tight runout tolerances are required High precision 0.005 mm repeatability Rated for sustained 3,000 rpm operation MT4 taper for straightforward mounting 60° centre angle for standard turning Robust 212 mm length and 2.2 kg mass Precision where consistent results are required A live support that maintains concentricity directly reduces scrap and rework costs. The VLC‑MT4A delivers a documented 0.005 mm accuracy, which translates into stable runout behaviour even under demanding cutting conditions. For machinists and production engineers this means predictable part geometry and fewer inspection rejects. The listed tolerance should be understood as the manufacturer’s repeatability figure under correct mounting and routine maintenance; it provides a clear, measurable basis for process capability assessment. Designed to stay steady at high speeds Built for applications that demand elevated spindle speeds, the unit is specified for operation at 3,000 rpm. The combination of a 60° centre angle and the MT4 taper ensures secure seating and correct workpiece support for common turning tasks. High‑speed compatibility reduces vibration and heat build‑up when matched with appropriate lathe balance and tooling, enabling smoother surface finishes and improved tool life. For shops converting batch runs to faster cycle times, the component’s speed rating supports greater throughput without compromising positional accuracy. Practical workshop benefits from a compact build With a length of 212 mm and a mass of 2.2 kg, the assembly integrates easily into existing setups while providing mechanical stability for medium‑duty turning. The compact footprint aids in accessibility for longer workpieces and simplifies storage when not in use. As a revolving centre intended for frequent use in toolrooms and small series production, it balances rigidity and manoeuvrability to suit both maintenance intervals and typical shop‑floor handling routines. Contact Metav Werkzeuge for application advice, spare part inquiries or to request a supply proposal for the Vertex VLC‑MT4A live centre from our Emmerich warehouse Technical Data Article number: VLC‑MT4A GTIN: 4061905085123 Manufacturer: Vertex ECLASS: 21022304 Facts Accuracy: 0.005 mm Maximum speed: 3,000 rpm Length: 212 mm Weight: 2.2 kg Centre angle: 60° Special features Revolving live centre for high speeds MT4 taper for direct mounting Designed for lathe workpiece support FAQ What applications are typical for this live centre? The VLC‑MT4A live centre is intended for lathe support tasks where controlled runout and higher spindle speeds are needed, such as finish turning and medium‑series production on CNC and conventional lathes. Is the unit compatible with an MT4 spindle? Yes, the design uses an MT4 taper to seat directly in MT4 sockets and adaptors, ensuring correct alignment and secure mounting for standard lathes. What does the stated 0.005 mm accuracy refer to? The 0.005 mm figure denotes the repeatability level for the live centre’s support point under proper mounting and normal operating conditions, providing an objective measure for expected concentricity. Can the live centre be used for long, slender workpieces? Its 212 mm length and robust mass make it suitable as a support for longer parts where intermediate support improves stiffness and turning stability. Who manufactures this product and where is it produced? Vertex manufactures the VLC‑MT4A live centre; the item is listed under SKU VLC‑MT4A and supplied by Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Live Centre For High Speeds MT4B, 0.005 mm Accuracy, 218 mm Length - Vertex
Take advantage of secure workpiece support at high spindle speeds, precise runout of 0.005 mm and a standard Morse taper MT4 interface for straightforward mounting; order the live centre directly via Metav Werkzeuge or ask our consultants for application advice. Live centre VLC-MT4B (Morse taper MT4, 60°) by Vertex VLC-MT4B is a rotating live centre designed to support workpieces at elevated spindle speeds in turning applications, featuring a 60° support angle and a robust MT4 taper. High-speed rotation up to 3,000 r.p.m. Precision runout 0.005 mm Morse taper MT4 mount 60° centre angle for secure support Precision and stability for high-speed turning The VLC-MT4B live centre combines tight concentricity with a design optimised for elevated spindle speeds, giving stable support during turning operations. The specification 0.005 mm runout ensures minimal wobble at the workpiece, which reduces chatter and improves surface finish. By maintaining concentric support, the component contributes to consistent part geometry and reduces rework rates, translating directly into improved process efficiency on production and jobbing lathes. Technical reliability that reduces set-up time A balanced construction rated to 3,000 r.p.m. provides dependable performance when the machine runs at higher speeds. The Morse taper MT4 interface offers a familiar, secure mounting method for rapid insertion and removal, cutting downtime during tool changes. Runout tolerance is a key technical parameter: it denotes the variation in rotational centre and, at 0.005 mm, supports precision turning where tight dimensional control is required. This combination of features supports faster cycle times without sacrificing accuracy. Practical compatibility and workshop advantages With an overall length of 218 mm and a mass of 2.2 kg, the rotating centre is long enough to support extended workpieces while remaining compact for most standard tailstock bores. The 60° centre angle conforms to conventional centre drills, ensuring reliable load transfer and repeatable seating. Designed for routine workshop use, the item simplifies set-up, reduces vibration and extends tool life by stabilising the workpiece; the familiar taper and robust build make integration into existing workflows straightforward. For application guidance and delivery from Metav Werkzeuge in Emmerich, contact our consultants to match the VLC-MT4B to specific turning tasks and schedule supply or technical consultation. Technical data SKU: VLC-MT4B GTIN: 4061905085710 Brand: Vertex Accuracy: 0.005 mm Max speed: 3,000 r.p.m. Length: 218 mm Weight: 2.2 kg Angle: 60° Special features Type: MT4B Designation: Live centre (rotating) for high speeds Description: Körnerspitze — rotating centre for elevated spindle speeds FAQ What maximum spindle speed is recommended for this live centre? The VLC-MT4B live centre from Vertex is specified for operation up to 3,000 r.p.m., making it suitable for many medium- and high-speed turning operations. How precise is the rotational accuracy of the centre? The rotating centre offers a runout tolerance of 0.005 mm, which supports high-precision turning and improved surface finishes for production and precision workshops. Which taper does the centre use for mounting? The centre uses a Morse taper MT4, a standard mount that provides secure, repeatable seating in compatible tailstocks and adaptors. Will this centre fit standard 60° centre drills and workpiece seats? Yes, the 60° support angle matches conventional centre drills and seating angles, ensuring consistent load transmission and reliable locating. What are the physical dimensions relevant for setup? Key dimensions are a length of 218 mm and a weight of 2.2 kg, which assist in determining reach and balance for specific turning setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Live Centre High-Speed, 2500 rpm, Accuracy 0.005 mm, MT5A Three-Point Running Tip - Vertex
Take advantage of the combination of high-speed capability, 0.005 mm runout precision and a robust MT5 taper for reliable support of turned workpieces; order the revolving centre directly via Metav Werkzeuge or ask our consultants for integration advice. VLC-MT5A Revolving live centre with MT5 taper — High-speed 2,500 r.p.m., 60° tip The VLC-MT5A is a revolving live centre designed for lathe support in high-speed turning applications, offering a 60° centring tip and MT5 taper for secure mounting in industrial workshops High-speed operation up to 2,500 r.p.m Precision runout 0.005 mm MT5 taper for secure mounting 60° centring tip for standard workpieces Designed for high-speed production without compromise The VLC-MT5A is engineered for high-speed lathe tasks where stable rotation and low vibration matter. With a rated spindle capability of 2,500 r.p.m., the component helps maintain consistent cutting conditions at elevated speeds, reducing cycle time and improving surface finish. The revolving mechanism is balanced for rotational stability, which supports faster feed rates and steadier machining of medium- to long-length shafts. Consistent accuracy for demanding turning operations Built around a low runout specification of 0.005 mm, this revolving centre provides measurable benefits for precision turning. Reduced radial deviation keeps the workpiece concentric to the spindle axis, which lowers rework rates and ensures repeatable tolerances on turned diameters. For inspection-sensitive components, the precision support afforded by the centre helps maintain batch uniformity and reduces downstream quality checks. Secure mounting and compatibility that simplify set-up The MT5 taper interface guarantees a rigid, repeatable connection with compatible tailstock spindles and adapters. The 60° tip geometry is industry-standard for centring most shafts and bar stock, enabling reliable axial support during turning and light grinding. The centre’s 264 mm overall length and stable mass contribute to secure seating and reduced deflection on longer workpieces, supporting consistent process control across production runs. Robust construction for workshop longevity and ease of use Weighing 4.5 kg, the unit reflects a substantial, workshop-ready build that resists chatter and thermal distortion during extended operations. The revolving bearings are specified to withstand continuous rotation under load, minimising maintenance intervals and supporting uptime in busy machine shops. Clear identification of taper and tip geometry streamlines tool selection and storage, helping organise a single-source tooling strategy for precision departments. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex VLC-MT5A revolving centre into production and to arrange a detailed technical review with our specialists Technical data SKU: VLC-MT5A GTIN: 4061905086694 Brand: Vertex Description: Revolving live centre for high spindle speeds Core data Accuracy (runout): 0.005 mm Maximum speed: 2,500 r.p.m. Overall length: 264 mm Tip angle: 60° Weight: 4.5 kg Features MT5A taper interface 60° centring tip Suited to high-speed applications Manufactured by Vertex FAQ What maximum spindle speed is recommended for this revolving centre? The VLC-MT5A revolving centre is specified for operation up to 2,500 r.p.m., which supports typical high-speed lathe operations encountered in production workshops. How precise is the centring performance of the centre? Precision is indicated by a runout of 0.005 mm for the Vertex VLC-MT5A, ensuring tight concentricity for demanding turning tasks. Which taper does the centre use and how does it mount? The unit features an MT5 taper, allowing direct seating into compatible MT5 tailstock spindles or adapters for secure and repeatable mounting. Is the 60° tip suitable for all turning tasks? A 60° tip is the standard centring geometry for a wide range of shafts and bar stock; the Vertex centre’s tip provides reliable axial support for general-purpose turning. What workshop benefits does the VLC-MT5A deliver? The VLC-MT5A offers a balance of precision, high-speed capability and rigid mounting to reduce rework, increase throughput and maintain consistent part quality in industrial environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com