Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
60° Live Centre Three-Point, Running Tailstock Tip for High Speeds 2500 rpm MT5B - Vertex
Take advantage of the combination of high-speed capability, precise 0.005 mm accuracy and the proven MT5B taper to maintain concentricity and finish in demanding turning operations. Order the live centre directly via Metav Werkzeuge or consult our specialists if additional specification details are required. VLC-MT5B revolving centre – live centre for high-speed turning (MT5B) The VLC-MT5B is a live centre designed to support rotating workpieces at increased spindle speeds, providing accurate axial support for finishing and precision turning. High-speed operation up to 2,500 r.p.m. Tight running accuracy 0.005 mm Standard MT5B taper for simple integration 60° centre angle for general turning tasks Reliable support at elevated spindle speeds The live centre is engineered for high-speed lathe work, rated to run at 2,500 r.p.m., which helps keep cycle times down on production and prototype runs. By providing steady axial support with a 60° centre angle, the unit contributes to reduced wobble and improved surface finish when used for turning and finishing operations. For workshops that value consistency, this stability translates into fewer rework cycles and a more predictable process chain, while the compact bearing arrangement sustains rotational stability during extended runs. Reach and rigidity that improve handling of longer parts With a length of 274 mm and a mass of 4.5 kg, the tool balances reach with axial rigidity. The MT5B taper ensures secure seating in compatible tailstocks and adaptors, offering a practical combination of accessibility and support for longer bars or stepped components. This geometry reduces deflection under load, which in turn helps maintain dimensional tolerances during facing, finishing and light turning tasks. The unit’s form factor allows integration into existing setups without extensive modification. Precision that protects concentricity and finish Specified with an accuracy of 0.005 mm, the centre is suitable for operations where concentricity matters. In practical terms, this level of runout control helps to safeguard the cutting edge orientation against oscillation, producing a more even tool engagement and a finer surface texture. For users less familiar with metrology terms: this figure describes the radial deviation under rotation and serves as a direct indicator of how precisely the centre will hold a workpiece in line with the spindle axis. Practical applications and workshop compatibility The revolving centre is intended for traditional lathe support tasks where a live centre is preferred over a dead (fixed) centre, such as finishing, reaming or light-duty turning where rotation of the support reduces heat build-up and wear. The MT5B interface aligns the component with a wide range of mid‑sized lathes equipped for Morse taper connections. The product is supplied by Vertex, a manufacturer with a long history in precision tooling, and is commonly specified where repeatable axial support is required across batches. For machining that demands precise, high‑speed support, contact Metav Werkzeuge to discuss the Vertex VLC‑MT5B live centre and arrange supply from our Emmerich quality hub. Technical data SKU: VLC-MT5B GTIN: 4061905085444 Manufacturer: Vertex Facts Length: 274 mm Weight: 4.5 kg Maximum speed: 2,500 r.p.m. Accuracy: 0.005 mm Centre angle: 60° Special features Revolving/live centre for high-speed turning MT5B taper interface Suitable for finishing and precision support Category: Vertex FAQ What maximum spindle speed is the live centre rated for? The live centre supports speeds up to 2,500 r.p.m., allowing the VLC-MT5B to be used in higher-speed finishing operations. What level of concentricity can be expected? The VLC-MT5B is specified with an accuracy of 0.005 mm, ensuring tight radial runout for consistent concentricity during turning. Which taper fits the tailstock or adaptor? The tool uses an MT5B taper, designed for secure seating in compatible tailstocks and Morse-taper adaptors. What is the overall length and how does that affect rigidity? The centre measures 274 mm in length; when combined with its 4.5 kg mass, this provides a balance of reach and axial stability suitable for many workshop turning tasks. Who is the manufacturer of this live centre? The live centre is produced by Vertex; the product is sold under the SKU VLC-MT5B and is distributed via Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° MT3B Live Centre Three-Point, High-Speed 4000 rpm, 0.005 mm Accuracy, 186 mm Length - Vertex
Reliable high-speed support and precise centring combine in one compact tool: a VLC-MT3B live centre offering up to 4,000 rpm and an accuracy of 0.005 mm, enabling consistent surface quality and repeatable setups. Order the live centre directly via Metav Werkzeuge or consult the in-house advisors for specification matching. VLC-MT3B live centre (MT3) by Vertex — 4,000 rpm, 0.005 mm accuracy A VLC-MT3B live centre engineered for high-speed turning and precise workpiece support on MT3 spindles High-speed rating to 4,000 rpm Precision runout 0.005 mm Standard MT3 taper fitting 60° hardened centre angle Engineered for fast, repeatable accuracy High-throughput turning demands components that can run reliably at speed without compromising accuracy. This rotating centre is rated to 4,000 rpm and specifies an accuracy of 0.005 mm, which translates into consistent concentricity and reduced scrap rates in short-run and repetitive production tasks. The precision specification helps to maintain tolerances across batches, enabling predictable finishing operations and lowering the need for rework. The combination of speed and repeatability is particularly beneficial for shops that balance cycle time with tight dimensional control. Stable support that improves surface finish A correctly profiled centre point reduces deflection and vibration during rotation, improving surface quality and tool life. The centre angle of 60° delivers conventional seating geometry for turned parts while the shaft length of 186 mm provides ample engagement for extended workpieces. At 1.4 kg the unit offers a compact mass that contributes to dynamic stability without adding excessive inertia to the spindle. These characteristics support controlled cutting conditions and a marked improvement in finish on turned diameters. Straightforward integration with standard lathe spindles Compatibility with a standard MT3 taper ensures quick fitment and minimal setup changeover on most manual and semi-automatic lathes. The rotating design eliminates fixed-point wear patterns and allows uninterrupted rotation with the workpiece, helping to reduce local heat build-up and scoring. The centre is suitable for quick installation and removal, which supports flexible production scheduling and rapid tooling swaps when different taper sizes or centres are required. Practical applications across workshop and light production environments Designed for conventional turning tasks and precision support during machining, the centre is appropriate for a range of metalworking operations where high-speed rotation and tight runout are required. Typical uses include general turning, facing where accurate centring is critical, and light-duty production where component consistency matters. The technical specification supports small-scale manufacturers and skilled workshops aiming to improve throughput while keeping finish and tolerance demands under control. Contact Metav Werkzeuge in Emmerich to discuss the Vertex VLC-MT3B for high-speed precision applications or to request detailed technical advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: VLC-MT3B GTIN: 4061905085789 Brand: Vertex Core data Accuracy: 0.005 mm Max speed: 4,000 rpm Length: 186 mm Weight: 1.4 kg Centre angle: 60° Special features Rotating (live) centre for high-speed turning MT3 taper fitting for standard spindles Precision 60° centre point for conventional seating FAQ What maximum spindle speed is the live centre rated for? The Vertex VLC-MT3B is specified for operation up to 4,000 rpm, providing suitability for many high-speed turning tasks. How accurate is the centre for concentric turning? Accuracy for the VLC-MT3B is specified at 0.005 mm, enabling repeatable concentricity and reduced rework in precision turning. Which spindle taper does the centre use? The unit fits a standard MT3 taper, offering straightforward compatibility with MT3-equipped lathes. What are the physical dimensions relevant to setup? Length is 186 mm and the rotating centre weighs 1.4 kg, dimensions that support secure engagement without excessive spindle load. For which types of turning is this centre intended? The live centre is suited to general turning and finishing operations where high-speed rotation and tight runout tolerance are required; it is aimed at workshops and light production environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
61mm Vertical Clamp 2000N Clamping Force, Massive Arm with Safety Lock - Kukamet
Robust clamping performance with a massive holding arm and safety lock, combined with a compact 61 mm arm and angle-base mounting, ensures secure, space-saving operation; order via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp »213« – 2,500 N holding force, angle base (Kukamet) A Vertical toggle clamp »213« engineered for secure vertical clamping in jigs, fixtures and assembly stations, offering a compact footprint and trustworthy locking for repeatable production processes Robust holding arm with safety lock Up to 2,500 N holding force Compact 61 mm arm for tight spaces Angle base for flexible mounting Consistent clamping forces for reliable production The clamp delivers measurable holding and pressing forces, with a maximum holding force of 2,500 N and a maximum pressing force of 2,000 N, which supports reproducible workholding in short-cycle production. Specified forces enable straightforward planning of fixtures and allow engineers to calculate safety margins for repeatable operations. The design translates force figures into practical outcomes: parts remain stationary during machining, welding or assembly, reducing rework and improving throughput. Space-saving mounting with a durable finish Designed for compact fixtures, the clamp’s 61 mm arm length and angle base make it simple to integrate where space is limited. The component’s blackened finish combines corrosion resistance with a subdued aesthetic suited to workshop environments. At 0.43 kg, the device is light enough for manual jigs yet robust in behaviour due to its massive holding arm, providing a balance between manoeuvrability and operational stability for toolrooms and production lines alike. Safer handling and straightforward integration The clamp incorporates a safety lock that prevents accidental release under load, supporting safer processes and helping to meet in-house safety practices. The lever-style mechanism offers fast actuation for increased cycle speed while the robust construction reduces the need for frequent maintenance. Integration into fixtures is simplified by the angle-base mounting, allowing flexible positioning and predictable clamping geometry for both prototype setups and serial production. Contact Metav Werkzeuge for application-specific guidance or to secure stock of the Kukamet Vertical toggle clamp »213« from our Emmerich warehouse Technical data Article number: B213-3-D-L-C1 Manufacturer: Kukamet Mounting: Angle base Material finish: blackened finish Weight: 0.43 kg Core technical data Maximum pressing force: 2,000 N Maximum holding force: 2,500 N Arm length: 61 mm Special features Massive holding arm Safety lock Angle base (mounting foot) Compact lever clamp design SKU: B213-3-D-L-C1 FAQ What is the maximum holding force of this clamp? The Kukamet Vertical toggle clamp »213« provides a maximum holding force of 2,500 N, as specified for secure workholding in fixtures. How is the clamp mounted in a jig or fixture? Mounting is carried out via the angle base, which allows flexible positioning of the clamp on plates or frames and simplifies integration into existing tooling layouts. Is the clamp suitable for high-cycle manual use? Yes, the lever-style action and massive holding arm make the clamp suitable for high-cycle manual operations where fast actuation and reliable locking are required. What finish does the clamp have and why does it matter? The component has a blackened finish, offering improved surface corrosion resistance and a durable appearance suited to workshop conditions. What is the arm length and how does it affect application planning? The arm length is 61 mm, a compact dimension that supports workholding in confined spaces while defining the clamping reach for fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
61mm Vertical Clamp 2000N Closing Force, Zinc Plated Massive Arm With Safety Lock - Kukamet
Robust zinc-plated construction, a massive holding arm and a compact 61 mm reach ensure stable fixtures and repeatable clamping with a holding force of 2,500 N. Benefit from reliable performance and easy integration into jigs and benches — order via Metav Werkzeuge or consult our specialists for technical advice. Kukamet 213 Vertical Clamp — vertical lever clamp with safety latch and zinc-plated finish The 213 Vertical Clamp is a zinc-plated vertical lever clamp engineered for workshop and light industrial fixturing, offering high holding force and secure mounting via an angle base for dependable repeatability. Zinc-plated steel construction Massive holding arm with safety latch Holding force 2,500 N Right-angle mounting foot Secure clamping for repeatable fixturing The lever-style vertical clamp delivers consistent clamping action and measurable force, making it suitable where process reliability matters. With a holding force of 2,500 N and a clamping force of 2,000 N, the device secures workpieces during milling, drilling and assembly operations, reducing part movement and rework. The mechanical locking element provides a clear engaged state, which supports reproducible setups and shorter cycle times. For users less familiar with industrial terminology, holding force refers to the maximum resistance against undesired movement once the clamp is engaged. Designed for robust workshop mounting A zinc-plated finish protects the clamp against corrosion in demanding workshop environments while keeping maintenance straightforward. The clamp mounts on a right-angle base, allowing attachment to fixtures, plates or machine tables where vertical clamping is required. The massive holding arm offers improved stability under side loads compared with slimmer designs; this increases resistance to bending and improves alignment over repeated cycles. Angle-base mounting simplifies integration into existing jigs and reduces the need for bespoke adapters. Compact footprint with high performance Weighing just 0.43 kg and featuring a 61 mm arm, the clamp combines a small footprint with industrial-strength performance, enabling use in confined assemblies and modular fixturing systems. Its compact dimensions ease placement close to the machining zone, shortening clamp-to-cut distances and offering better access for tooling. The lever mechanism is efficient in space usage and provides fast actuation, which helps to maintain throughput without compromising clamp capacity. Safe operation and straightforward upkeep Safety features include a dedicated safety latch that prevents accidental release when the clamp is under load, supporting safer handling in repetitive operations. Routine maintenance is limited to periodic lubrication of the pivot points and a visual check of the latch and fastenings; the zinc plating reduces the frequency of protective treatments. Built as a mechanical device with few wear parts, the clamp offers predictable life expectancy when used within the specified force ratings, supporting consistent production quality. Choose the Kukamet 213 for dependable vertical clamping and contact Metav Werkzeuge for specification matching and procurement — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixtures Technical Data SKU: 213-3-D-L-C1 GTIN: 8680731501988 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 61 mm Holding force max: 2,500 N Clamping force max: 2,000 N Weight: 0.43 kg Special features Material: zinc-plated Mounting: angle base (right-angle foot) Massive holding arm and safety latch Category: clamp FAQ What materials is this clamp suitable for? The 213 vertical clamp is a mechanical clamping device designed for fixture work on metals and general workshop materials; the spec sheet lists its construction as zinc-plated steel, which is compatible with common machining and assembly tasks. How does the safety latch work on the 213 Vertical Clamp? The safety latch secures the lever in the engaged position to prevent unintended release under load; on the 213 model the latch is integrated with the massive holding arm to maintain engagement during vibration or side loads. Can the clamp be mounted to custom fixtures? Yes, the angle base allows secure attachment to plates and fixtures; the right-angle mounting foot is intended for simple integration into jigs and modular fixturing systems. Is the clamp suitable for repetitive automated use? The lever mechanism and robust arm of this vertical clamp support repeatable manual and semi-automated operations when used within the specified holding and clamping forces. What maintenance does the 213 require to retain performance? Basic upkeep includes periodic lubrication of pivot points, inspection of the safety latch and fasteners, and cleaning to remove chips and coolant; the zinc-plated finish reduces corrosion-related maintenance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
61mm Vertical Clamp With Massive Holding Arm, 2 000 N Thrust, Zinc Coated - Kukamet
Take advantage of the combination of a galvanised, massive holding arm and high clamping performance to secure fixtures reliably and reduce setup time. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for integration advice. Vertical clamp 213 by Kukamet — galvanised, 2,500 N holding force The Vertical clamp 213 is a heavy-duty vertical toggle clamp designed for reliable workholding in jigs, fixtures and assembly stations across metalworking and general workshop environments. Galvanised finish for corrosion resistance Massive holding arm for rigid clamping Angled-foot mounting for flexible attachment Up to 2,500 N holding force Secure, measurable clamping performance for production The clamp delivers a clear technical advantage: a 2,000 N clamping force with a maximum 2,500 N holding capacity, ensuring that workpieces remain stationary during machining, welding and assembly. The difference between clamping and holding force is crucial in practice — clamping force is the applied closure force, while holding capacity defines the resistance to displacement under load. This makes the device particularly suitable where repeatable, measurable restraint is required for consistent part quality and reduced rework. The robust specification supports higher process reliability and shorter cycle-time variability. Durable construction that reduces maintenance and downtime Constructed in a galvanised finish with a massive holding arm, the clamp resists corrosion and mechanical wear common in workshop environments. Galvanisation provides a protective zinc layer that extends service life in humid or oily conditions, lowering long-term maintenance needs. The solid arm increases rigidity at the contact point, translating to improved positional stability and less component movement. Despite its strength, the unit remains compact with a weight of 0.426 kg, enabling easy retrofitting into existing fixtures without adding excessive load to assemblies. Fast mounting and precise positioning for flexible fixtures Installation is simplified by the angled-foot mounting, which allows the clamp to be secured at a variety of orientations on plates and bases. The arm length of 61 mm provides adequate reach for common clamping tasks while keeping the footprint small, making the device suitable for tight jig designs. The toggle mechanism offers a clear open/closed position for quick manual operation and predictable repeatability during batch work. With its compact form and standard fastening, the clamp integrates readily into production jigs and can be used across diverse operations where stable, repeatable clamping is required. Contact Metav Werkzeuge for product availability and practical advice on integrating the Kukamet 213 vertical clamp into existing fixtures at the Emmerich site, where stock and technical expertise are ready to support workshop needs. Technical data SKU: 213-3-D-C1 GTIN: 8680731501957 Designation: Vertical clamp 213 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Arm length: 61 mm Weight: 0.426 kg Clamping force (max): 2,000 N Holding force (max): 2,500 N Special features Material: galvanised Mounting: angled-foot mounting Massive holding arm Model designation: 213 FAQ What maximum holding force does the clamp provide? The Vertical clamp 213 offers up to 2,500 N holding capacity, specified to maintain secure restraint under load. Which mounting option is used for fixture attachment? The unit uses an angled-foot mounting, enabling flexible attachment to plates and jig bases. Is the clamp suitable for workshop environments with humidity or splash exposure? Yes, the galvanised finish on the Vertical clamp 213 improves corrosion resistance for typical workshop conditions. What is the effective arm reach for positioning parts? The arm provides a 61 mm reach, suitable for most small- to medium-sized jig tasks requiring a compact footprint. Which applications are typical for this type of vertical toggle clamp? The clamp is intended for jigs, fixtures, assembly and light machining where repeatable, rigid clamping is required; the specification supports welding, assembly and general workshop workholding. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
61mm Vertical Clamp With Massive Holding Arm, 2 000N Thrust / 2 500N Hold - Kukamet
Take advantage of the combination of a massive holding arm, compact 61 mm reach and a holding force of 2,500 N for reliable, repeatable fixturing; order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Kukamet Vertical clamp 213 — vertical clamp with 61 mm arm and high holding force The Vertical clamp 213 is a compact vertical clamping device intended for secure fixturing in machining, assembly and jig applications, featuring an angled-foot mounting for flexible installation. Robust 61 mm arm with massive holding arm Angled foot mounting for versatile installation Holding force up to 2,500 N Blackened finish for corrosion resistance Secure, repeatable clamping that stands up to daily use The clamp delivers a defined clamping force and a maximum holding force of 2,500 N, providing stable fixation for repetitive operations. Thanks to the solid construction and the massive holding arm, the device keeps workpieces stationary during machining and assembly, reducing rework and set-up time. The force values are suited to general workshop and light industrial fixturing where consistent pressure and repeatability are required, improving process reliability and part quality. Compact mounting and robust geometry save space without compromising stability With a 61 mm arm and an angled foot mounting, the unit integrates easily into small fixtures and tight benches while still providing mechanical leverage for secure clamping. The low weight of 0.426 kg and compact footprint simplify positioning on jigs and ensure minimal added mass to moving fixtures. The combination of compact geometry and robust arm design allows flexible placement on welding tables, assembly stations or drilling fixtures where space is at a premium. Durable surface treatment reduces maintenance effort The blackened finish (Schwarz brüniert) provides a protective surface that resists corrosion and everyday wear, contributing to low maintenance over the component lifetime. The surface treatment preserves sliding and pivoting items while maintaining consistent clamping behaviour; routine upkeep is limited to basic cleaning and occasional lubrication of moving contact points, keeping downtime to a minimum. Practical suitability and typical applications for workshop workflows Engineered for fixture builders and workshop technicians, this vertical clamping device suits use in jigs, welding fixtures and assembly stations where secure vertical pressure is required. The angled-foot attachment supports varied mounting orientations and the robust arm handles repeated cycles reliably, making the clamp a pragmatic choice for production lines and bespoke fixturing solutions that demand durability and predictable performance. Choose the Kukamet 213 vertical clamp for robust, space-saving fixturing and contact Metav Werkzeuge for procurement or technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: B213-3-D-C1 GTIN: 8682843522462 Manufacturer: Kukamet Facts Arm length: 61 mm Weight: 0.426 kg Max clamping force: 2,000 N Max holding force: 2,500 N Special features Mounting: angled foot Finish: blackened (Schwarz brüniert) Massive holding arm FAQ What is the maximum holding force of this clamp? The Kukamet vertical clamp 213 provides a maximum holding force of 2,500 N, specified for reliable fixation during machining and assembly tasks. How is the clamp mounted in a fixture? Mounting is via an angled foot; the angled-foot mounting simplifies installation into jigs and benches and allows versatile mounting orientations for the vertical clamping device. Is the surface treatment corrosion resistant? Yes, the blackened finish on the Kukamet clamp offers corrosion resistance and reduces routine maintenance requirements. Can the clamp be used on compact fixtures and small benches? The 61 mm arm and compact design make the clamp suitable for integration into space-constrained fixtures, offering stability without a large footprint. What is the item reference for ordering? The product is listed as SKU B213-3-D-C1 and is supplied by Kukamet as the Vertical clamp 213. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
620N Hold Force 550N Thrust Rod Clamp With Spring, Zinc Plated - Kukamet
Take advantage of the combination of fast, repeatable clamping and corrosion-resistant construction for reliable fixture performance in small to medium‑run production; order the push-pull clamp directly via Metav Werkzeuge or ask our consultants if needed. 511 Push-pull Clamp by Kukamet — spring-loaded, horizontal base 511 Push-pull Clamp is a compact push‑rod clamping unit designed for repetitive fixture and assembly tasks where rapid actuation and secure holding are required. Spring-loaded action for rapid clamping Horizontal base for stable mounting Galvanised steel for corrosion resistance Holding force up to 620 N for secure fixation Faster cycles with dependable holding power The spring-loaded mechanism delivers quick actuation and consistent return travel, reducing takt time on repetitive operations. With a holding force 620 N and a clamping force 550 N, the unit provides a measurable balance between secure fixation and controlled pressure, suitable for jigs, small fixtures and light assembly operations. Measured forces enable clear specification in process planning and support predictable cycle performance for production lines. Robust, low-maintenance construction for workshop environments Built with a galvanised finish and a horizontal base for mounting, the clamp resists shop humidity and light corrosion while remaining easy to integrate on fixture plates or assembly benches. The compact body and a net weight of 0.26 kg keep the device unobtrusive where space is limited, and the galvanised surface reduces cleaning and surface preparation compared with untreated parts, lowering routine maintenance effort. Simple mounting and predictable application behaviour Mounting is achieved via the horizontal foot, providing a stable attachment point that minimises lever‑induced stress on the fixture. The spring assistance maintains consistent preload between cycles, supporting repeatable positioning and improved part quality. The unit suits clamping, holding and light pressing tasks in production and testing setups; reference SKU 511-2-Y when specifying the component in fixture lists or procurement orders for unambiguous sourcing. For workshop-ready clamping solutions, request technical advice or place an order for the Kukamet 511 push-pull clamp through Metav Werkzeuge; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Brand: Kukamet Model: 511 SKU: 511-2-Y GTIN: 8680731506082 Core figures Holding force: 620 N Clamping force: 550 N Weight: 0.26 kg eClass: 21041716 ETIM: EC011973 Materials & features Galvanised finish Horizontal base mounting Spring-loaded mechanism Category: Spanner Asset: catalogue PDF available FAQ What is the difference between holding force and clamping force? Holding force refers to the maximum tensile resistance once clamped, while clamping force indicates the pushing pressure applied during actuation; the Kukamet 511 push-pull clamp specifies both values to support accurate fixture design. Can the clamp be mounted on a fixture plate with standard screws? Yes, the horizontal base is intended for secure mounting to fixture plates; ensure suitable fasteners and torque specifications for the application to maintain stability. Is the surface treatment suitable for humid workshop conditions? The galvanised finish provides improved corrosion resistance compared with bare steel, making the unit appropriate for typical workshop environments. What typical applications suit this clamp? The clamp is tailored for jigs, repetitive assembly tasks and small production fixtures where rapid cycling and consistent repositioning are required. Which identification should be used when ordering or specifying this clamp? Reference SKU 511-2-Y and GTIN 8680731506082 to ensure the correct Kukamet model is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
620x420x450mm Ejector Pin Cutting Machine 3600rpm, 0.1mm Accuracy - Vertex
Take advantage of the combination of high cutting speed, measured precision and a compact footprint for consistent productivity in mould and tool workshops. Order the unit directly via Metav Werkzeuge or consult our specialists for setup and integration. VEC-100 Ejector Pin Cutting Machine — 3,600 rpm, 0.1 mm accuracy (Vertex) The VEC-100 is a precision ejector pin cutting machine designed for mouldmaking and toolroom applications, delivering fast, repeatable cuts for small, high-precision components. High-speed 3,600 rpm for efficient throughput Repeatable accuracy to 0.1 mm per cut Solid, vibration-damping construction at 94.5 kg Compact footprint: 620x420x450mm Consistent, measurable precision for small parts The VEC-100 offers reliable precision that supports repeatable production of ejector pins and similar small parts. With a specified accuracy of 0.1 mm, the cutter reduces the need for manual rework and length matching, which shortens downstream processing time. The stated tolerance refers to the reproducibility of the cut length under normal operating conditions; this allows workshop planners to calculate yield and set-up intervals with confidence. Precision in this context means fewer rejects and a more predictable production rhythm. Faster cycle times through controlled high speed A nominal spindle speed of 3600 rpm enables shorter cycle times while maintaining cut quality when paired with appropriate tooling and feed. High rotational speed improves throughput for small-diameter pins where multiple cuts are required, and the machine’s design prioritises stable cut conditions to avoid burr formation. By combining rotational speed with steady workholding and a stiff frame, the unit achieves a balance between productivity and surface integrity, supporting lean manufacturing workflows in toolmaking environments. Robust, compact build that fits the workshop Engineered for stability, the machine’s robust construction and mass of 94.5 kg reduce vibration and contribute to consistent cutting results. Its compact footprint (620x420x450mm) makes it suitable for benches or dedicated cells without sacrificing rigidity. The compact design also simplifies integration into existing production lines and allows planners to make efficient use of floor space. Maintenance is straightforward thanks to accessible service points, helping to keep downtime predictable and limited. Contact Metav Werkzeuge to discuss integration of the Vertex VEC-100 into the workshop and to arrange a tailored delivery and setup plan close to your facility Technical Data Article number: VEC-100 GTIN: 4061905084096 Manufacturer: Vertex Facts Accuracy: 0.1 mm Speed: 3600 rpm Weight: 94.5 kg Dimensions: 620x420x450mm Special features eClass: 23120390 ETIM: EC001959 SKU: VEC-100 FAQ What materials can be processed with this cutter? The VEC-100 is intended for cutting standard ejector-pin materials used in mouldmaking; compatibility depends on the chosen cutting tool and process parameters. How does the specified accuracy affect production planning? An accuracy of 0.1 mm for the VEC-100 allows planners to minimise post-cut matching and to set realistic yield and inspection intervals for small-part production. Is the machine suitable for bench mounting in a small workshop? Yes; the compact footprint (620x420x450mm) and solid 94.5 kg construction are designed for placement on benches or in compact cells typical of toolrooms. Which brand manufactures this machine? The VEC-100 is manufactured by Vertex and is supplied through Metav Werkzeuge for European customers. What information is needed to order spare parts or tooling? Provide the machine SKU (VEC-100) and the part description; Metav Werkzeuge can assist with correct tooling and spare-part selection. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
62mm Drill Holder Form E2 S Slotted Reduced Vibration, DIN 69880 - TECWERK
Take advantage of the vibration-reducing slotted design and the VDI30 interface with 40 mm clamping diameter for steadier drilling and improved hole quality. The Type B configuration (not through-bored) gives a compact, secure mounting in turret systems while the retaining ring prevents accidental release in the revolver — order the holder directly via Metav Werkzeuge or request technical guidance from our consultants. TECWERK VDI30 Tool Holder for Drill Bars — 40 mm Clamping, Type B The TECWERK VDI30 tool holder for drill bars is a Form E2 S, Type B holder built to provide secure, low‑vibration clamping for turret-mounted drilling applications compliant with DIN 69880. VDI30 taper for turret-mounted machines Slotted design reduces vibration through wrap Suitable for solid bars with V-groove Retaining ring secures holder in turret Improved hole quality through vibration damping The slotted, wrap-around gripping section is engineered to reduce vibration and stabilise the cutting process. By encircling the drill bar, the holder dampens oscillations that typically cause chatter, which in turn improves hole accuracy and surface finish. The clamping arrangement with a 40 mm nominal clamping diameter gives a sturdy interface that lowers radial run-out and prolongs tool life, translating into fewer rework cycles and more consistent production output. Straightforward integration with VDI30 turret systems Designed to the DIN 69880 specification and featuring a VDI30 interface, the holder ensures rapid installation and repeatable positioning on compatible turret systems. The Form E2 S geometry and a shank diameter of 30 mm match standard tooling configurations, so integration into existing setups is uncomplicated. Compatibility includes solid round drill bars and those fitted with a V‑groove, allowing workshops to retain common bar stocks without special adapters. Operational setup and cooling considerations This Type B holder is not through-bored, which means it does not provide an internal coolant feed through the shank; external cooling remains feasible. The unit is secured against accidental disengagement in the revolver by a retaining ring, and slotted gripping depths are specified for different bar lengths (up to 16 mm: 4×D; 20/25 mm: 3×D; from 32 mm: 2.5×D), enabling predictable clamping zones and machining reach. Because the shank is not drilled through, axial length adjustment from the shank side is not applicable for this variant. Practical workshop benefits and reliability Adopting a standardised, vibration‑damping holder brings immediate operational advantages: reduced scrap, improved tool life and greater process stability. The robust construction and the adherence to established standards ensure predictable interchangeability and make procurement and inventory management simpler. For production environments seeking steady machining performance under repeated cycles, this VDI30 holder provides a dependable component that supports continuous operation and lowers the risk of unexpected downtime. Contact Metav Werkzeuge for tailored technical advice and to source the TECWERK VDI30 tool holder; Metav’s specialists will assist with compatibility checks and order fulfilment from their Emmerich facility Technical data Article number: 2000833484NW Product: Tool holder for drill bars Brand: TECWERK Standard: DIN 69880 Form: E2 S Core data Diameter D: 62 mm Clamping diameter d2: 40 mm Shank diameter d1: 30 mm Overall length L: 142 mm L1: 120 mm Type: B (not through-bored) Special features Slotted design for vibration damping Suitable for solid round drill bars with V-groove Retaining ring secures against falling out in turret Slotted grip depths: up to 16 mm = 4×D; 20/25 mm = 3×D; ≥32 mm = 2.5×D External cooling possible Not through-bored; no internal coolant feed FAQ Is this holder suitable for solid round drill bars? The TECWERK VDI30 tool holder (tool holder for drill bars, SKU 2000833484NW) is designed for solid round drill bars, including those with a V‑groove, and provides a slotted clamping section for stable retention. Can coolant be supplied through the shank? No — this is a Type B holder and is not through‑bored, so internal coolant feed is not available; external cooling methods can be applied to the cutting zone. Which turret interface does the holder fit? The holder uses a VDI30 interface compliant with DIN 69880, making it compatible with turret systems that accept VDI30 toolholders. How does the holder reduce vibration during drilling? Vibration is reduced by the slotted, wrap‑around grip that increases contact and damping around the drill bar; this lowers chatter and improves hole accuracy and tool life. What are the key dimensions to check for machine compatibility? Key dimensions: D 62 mm, clamping diameter d2 40 mm, shank d1 30 mm, overall length L 142 mm, L1 120 mm; conforms to DIN 69880. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
62mm Tool Holder For Boring Bars Form E2S Slotted, DIN 69880 - TECWERK
Take advantage of the combination of robust vibration damping and a VDI30 interface with a 32 mm clamping diameter for stable boring results and uninterrupted production flow; order the holder directly via Metav Werkzeuge or consult our specialists for integration advice. TECWERK Tool Holder for Boring Bars — VDI30, E2 S, 32 mm Clamping The TECWERK tool holder for boring bars (Form E2 S, Type B) provides a slotted, wrap‑around clamping solution for turning and boring applications, engineered to improve stability and tool life. VDI30 interface for secure mounting Slotted E2 S design reduces vibration Clamping diameter 32 mm for boring bars External and internal cooling compatible Stable clamping for improved surface finish and tool life The slotted, wrap‑around design delivers a secure grip on round shanks and is especially effective for full‑round boring bars with a V‑groove. By mechanically damping oscillation through the slotted design, the holder reduces vibration, which directly improves surface finish and extends cutter life. The VDI30 interface ensures a repeatable, concentric connection to the turret or spindle, so run‑out is controlled and setup time is minimised. This combination supports higher process stability and fewer scrapped parts. Clear dimensional compatibility for seamless integration Designed to the DIN 69880 standard, the holder matches common machine interfaces and bar sizes. Key dimensions include clamping diameter 32 mm, overall length 142 mm, working length 120 mm, outer diameter 62 mm, and shank diameter 30 mm; the unit conforms to Form E2 S and is specified as Type B. These measurable values allow straightforward verification against machine tool envelopes and existing tooling, reducing the effort required for retrofits and ensuring correct selection for the intended boring bar geometry. Operational considerations and safety features that matter on the shop floor This variant is specified as Type B (not through‑drilled), so internal coolant delivery through the shank is not available on this exact model; external coolant remains compatible. The holder is secured with a retaining ring to prevent ejection in turret operations, supporting safe high‑speed use. The slotted gripping ranges are dimensioned to provide reliable clamping across bar diameters: up to 16 mm at 4×D, 20 and 25 mm at 3×D, and from 32 mm at 2.5×D. These design choices balance clamping force and flexibility, making the holder suitable for demanding industrial machining where predictable performance and operational safety are priorities. Contact Metav Werkzeuge for technical integration guidance and to discuss supply options for the TECWERK VDI30 tool holder or request a tailored quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000833483NW Manufacturer: TECWERK Product type: Tool holder for boring bars Standard: DIN 69880 Core data Diameter D: 62 mm Clamping diameter d2: 32 mm Overall length L: 142 mm Working length L1: 120 mm Shank diameter d1: 30 mm Special features Form: E2 S Type: B (not through-drilled) Slotted, wrap-around design reduces vibration Suitable for full-round boring bars with V-groove Secured with retaining ring to prevent ejection External and internal cooling possible Slotted gripping ranges: ≤16 mm 4×D; 20/25 mm 3×D; ≥32 mm 2.5×D FAQ What size of boring bar does this holder accept? The TECWERK tool holder accepts boring bars with a clamping diameter of 32 mm and is designed for full‑round bars including those with a V‑groove. Is the holder compatible with machines using the VDI30 interface? Yes, the holder uses the VDI30 interface and is compliant with DIN 69880, allowing direct mounting to compatible turrets and adapters. Can coolant be fed through the holder? This Type B variant is not through‑drilled, so internal coolant delivery through the shank is not available; external cooling remains possible. How does the slotted design affect performance? The slotted, wrap‑around design reduces vibration and improves grip on round shanks, which leads to better surface finish and extended tool life. Is the holder secure for turret operations? Yes, the holder is secured with a retaining ring to prevent ejection during indexing or high‑speed turret cycles. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
62mm Vertical Clamp 1,200N Closing Force, Massive Holding Arm With Safety Lock, Zinc-Plated - Kukamet
Compact, zinc-plated vertical clamp with a 62 mm heavy-duty arm and safety locking provides reliable holding force up to 1,400 N, combining robustness and low weight for efficient jig and fixture work. Order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. Vertikalspanner 212 — Vertical toggle clamp, zinc-plated, 62 mm arm (Kukamet) The Vertikalspanner 212 is a zinc-plated vertical toggle clamp intended for secure workholding in assembly, jig and fixture applications where a compact, locked clamping action is required. Zinc-plated finish for corrosion resistance 62 mm heavy-duty holding arm Safety locking mechanism for secure clamping Holding force up to 1,400 N Secure clamping in confined spaces This vertical toggle clamp delivers a consistent and repeatable clamping action thanks to its robust lever geometry and compact mounting footprint. The 62 mm arm positions the clamping point precisely while maintaining a compact footprint, which is particularly useful for tight jigs and assembly fixtures. The combination of a high holding force (1,400 N) and a dedicated clamping force rating supports stable workpiece retention during machining, assembly or testing operations, reducing the risk of movement and rework. Designed for safety and repeatability A massive holding arm combined with an integrated safety locking mechanism prevents unintended release under vibration or shock. The locking feature secures the clamp in the closed position, increasing operator confidence and contributing to safer production lines. Terms such as holding force and clamping force describe the static retention and applied pressure respectively; the clearly specified values support objective selection for repeatable, measurable process results. Durable construction and straightforward integration Finished in zinc-plated steel, the clamp offers corrosion protection suitable for general workshop and production environments. The vertical foot mounting allows direct incorporation into fixtures or baseplates without complex adapters, and the unit’s lightweight construction (approx. 0.21 kg) keeps fixture deadweight low while delivering robust performance. For production planners and fixture designers, the clamp represents a pragmatic balance between durability and ease of installation, helping to maintain throughput and reduce fixture complexity. Contact Metav Werkzeuge for specific application recommendations on the Kukamet Vertikalspanner 212 and to discuss compatible fixture designs; reach us at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 212-2-D-L-C1 GTIN: 8680731501544 Manufacturer: Kukamet Key figures Arm length: 62 mm Clamping force (max): 1,200 N Holding force (max): 1,400 N Weight: 0.21 kg Features Material: zinc-plated steel Mounting: vertical foot Massive holding arm Safety locking mechanism Category: Spanner eClass: 21041717 ETIM: EC011973 FAQ What materials can be clamped with this vertical toggle clamp? The Vertikalspanner 212 is suitable for a wide range of common workshop materials; selection should be based on clamping pressure and fixture layout rather than material alone. How is the clamp mounted in a fixture? Mounting uses the vertical foot; the clamp is designed for direct attachment to baseplates or jig plates in assembly and fixture setups. Does the clamp prevent accidental opening during vibration? Yes, the integrated safety locking mechanism secures the clamp in the closed position to reduce the risk of unintended release under vibration. What are the dimensional limits for the clamping point? The clamp features a 62 mm arm that determines the standard reach to the clamping point; final reach depends on how the arm is fitted within the fixture. Is the surface treated for corrosion resistance? The unit is zinc-plated to provide corrosion protection suitable for general workshop and production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
62mm Vertical Clamp 1,200N Thrust, Heavy-Duty Arm With Safety Lock - Kukamet
Take advantage of the combination of a robust 62 mm holding arm, a reliable safety locking mechanism and clearly specified force values to ensure consistent clamping in production and assembly processes; order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 211 by Kukamet — 62 mm arm, 1,200 N clamping force A Vertical clamp 211 that provides secure vertical workholding for fixtures and assembly operations, designed for horizontal-foot mounting and repetitive use in industrial environments Robust 62 mm hold arm Safety locking mechanism Horizontal mounting foot 1,200 N clamping force Consistent clamping performance for repetitive tasks The clamp delivers a reproducible clamping force of 1,200 N, backed by a holding force rating of 1,400 N, which supports repeatable operations in assembly and jigs. Specified force values simplify process planning and help reduce variability across assemblies, making the component suitable where predictable retention and quick actuation are required. The clear numeric ratings allow straightforward comparison with alternative fixtures and torque budgets. Built for durability in workshop and light industrial use A robust arm construction and blackened finish contribute to long service life under regular handling. The massive hold arm and a dedicated safety lock reduce the risk of unintentional release, translating into fewer stoppages and lower rework rates. Materials and surface treatment focus on resistance to wear and on maintaining function rather than on cosmetic appearance, supporting demanding day-to-day usage. Stable mounting that speeds up setup Equipped with a horizontal mounting foot, the clamp can be integrated directly into flat fixture plates or machine beds without complex adapters. The foot arrangement ensures a low-profile installation and straightforward alignment, which cuts fixture build time and helps maintain positional accuracy during cycle changes. Fast, reliable anchoring supports lean production and quick changeovers. Small footprint, low mass, big impact Weighing only 0.235 kg, the device is compact yet effective where space is limited or where multiple clamps are required in close proximity. The modest mass simplifies handling during fixture assembly and reduces added load on movable elements. Lightweight components allow denser layouts without compromising the rigidity necessary for repeatable clamping. Clear technical specification eases procurement The clamp is supplied under SKU B211-2-D-L-C1 and is classified for use in standard clamping applications where vertical actuation is preferred. Key specifications such as arm length 62 mm, clamping and holding forces, and mounting style are explicit, enabling accurate BOM entries and reducing the need for clarifying enquiries during purchase planning. Safety and maintenance focus for workshop reliability A mechanical safety lock secures the clamping position during idle times, lowering the chance of accidental opening and protecting both components and operators. Routine inspection is straightforward: visual checks on the arm, lock engagement and mounting fixings are sufficient to maintain operational readiness. The design favours simple upkeep rather than specialised servicing. For dependable workholding choose the Kukamet vertical clamp 211—contact Metav Werkzeuge for purchasing advice and product matching to specific fixtures via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: B211-2-D-L-C1 Manufacturer: Kukamet Facts Arm length: 62 mm Clamping force: 1,200 N Holding force: 1,400 N Weight: 0.235 kg eClass: 21041717 ETIM: EC011973 Special features Horizontal mounting foot Massive holding arm Safety locking mechanism Blackened finish FAQ What is the maximum clamping force of the clamp? The clamp provides a clamping force of 1,200 N as specified for the vertical clamp 211 by Kukamet. Can the clamp be mounted directly to a fixture plate? Yes, the horizontal mounting foot is intended for direct attachment to flat fixture plates and machine beds. Is the holding position secured against accidental release? A mechanical safety lock is integrated to secure the clamping position and prevent unintentional opening. What are the dimensions relevant for layout planning? Key layout data include the 62 mm arm length and the compact weight of 0.235 kg, which facilitate close positioning of multiple clamps. Which SKU should be ordered for this model? Order using SKU B211-2-D-L-C1 to specify this particular vertical clamp variant. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
62mm Vertical Clamp Three-Point, Massive Holding Arm, 1,200 N Thrust / 1,400 N Hold - Kukamet
The combination of a solid holding arm, compact footprint and a maximum clamping force of 1,200 N delivers dependable, repeatable workholding for light assembly and machining tasks. Order the clamp directly via Metav Werkzeuge or contact the specialists for application advice. Kukamet Vertical clamp 211 — vertical clamp with 1,200 N clamping force and 62 mm arm The Vertical clamp 211 is a lever-operated vertical clamp designed for secure workholding in assembly fixtures, jigs and light machining operations. Solid holding arm, 62 mm reach Horizontal base for secure mounting 1,200 N maximum clamping force 1,400 N maximum holding force Blackened finish Dependable force control for consistent production quality The 1,200 N clamping force and 1,400 N holding force translate into a reliable grip that reduces part movement during processing and assembly. In practical terms, the clamping force is equivalent to approximately 122 kgf, which is suitable for many fixture applications in metalworking and general workshop operations. Specifying a clamp with clear force ratings enables predictable cycle times and fewer rejects, a rational choice for production environments where consistency and throughput are priorities. Compact, robust design for space-saving fixtures A 62 mm reach from the pivot provides a useful working radius while the solid holding arm gives mechanical stiffness where it matters. The clamp’s horizontal base is intended for secure mounting to flat fixture plates or subplates, simplifying integration into existing tooling. At roughly 0.206 kg the device is lightweight enough to position multiple units without excessive mass while remaining robust in use, supporting flexible layout design in small-batch or modular production cells. Practical surface protection and low-maintenance operation The blackened finish offers a uniform surface treatment that reduces glare and provides basic corrosion protection for workshop environments. The lever-operated mechanism is straightforward to operate and can be installed with standard fasteners on the horizontal foot. Routine checks and occasional lubrication of the pivot points are sufficient to maintain reliable operation, keeping maintenance effort and downtime to a minimum. For precise, compact clamping choose Kukamet’s Vertical clamp 211 — contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B211-2-D-C1 GTIN: 8680731507652 Manufacturer: Kukamet Model: 211 eClass: 21041717 ETIM: EC011973 Facts Arm reach: 62 mm Clamping force max: 1,200 N Holding force max: 1,400 N Weight: 0.206 kg Special features Horizontal base mounting Solid holding arm Blackened finish Lever clamp design Category: Clamps FAQ What clamping and holding forces does this clamp provide? The clamp offers a maximum clamping force of 1,200 N and a maximum holding force of 1,400 N, as specified for the Vertical clamp 211. Can the clamp be mounted on a fixture plate? Yes, the horizontal base is designed for secure mounting to flat plates and subplates typical in jig and fixture construction. Is the finish suitable for workshop environments? The unit features a blackened finish that provides surface protection appropriate for general workshop use. What is the reach of the holding arm? The holding arm has a reach of 62 mm, providing a practical working radius for many assembly and light machining tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
62mm Vertical Clamp With Horizontal Foot, Massive Holding Arm, 1,200N Closing Force, Galvanised - Kukamet
With a massive holding arm, zinc-plated construction and a compact weight, this clamp delivers stable, repeatable clamping where space is limited. The combination of 1,400 N holding capacity and a 1,200 N pressing force ensures secure fixation for short-cycle assembly and light production tasks — order directly via Metav Werkzeuge or consult our specialists for specification support. Vertical clamp 211 — Kukamet zinc-plated vertical clamp with 62 mm arm A vertical clamp 211 designed for secure vertical clamping in fixtures and jigs, featuring a horizontal-foot mounting for stable attachment in production and workshop environments. Massive holding arm for secure clamping Zinc-plated corrosion protection Horizontal foot for stable mounting Robust clamping performance for reliable fixtures The compact design delivers a clear performance advantage: holding capacity 1,400 N and clamping force 1,200 N provide measurable security for repeat operations. Holding capacity describes the sustained force the mechanism maintains once engaged, while pressing force indicates the maximum instantaneous actuation pressure. Together these figures mean fewer reworks and improved cycle reliability when the clamp is integrated into assembly stations or jig systems. The solid construction reduces micro‑movement under load, which is particularly relevant for precision alignment during machining or assembly. Space-conscious mounting with clear installation benefits Equipped with a 62 mm arm and a horizontal-foot mounting, the clamp installs neatly on flat fixture plates or machine tables. The horizontal foot distributes load and simplifies positioning; the relatively low weight 0.206 kg minimises added mass to moving fixtures. Zinc-plated surfaces resist corrosion in workshop atmospheres, lowering maintenance intervals and keeping contact faces consistent over time. For practical use, the lever action enables quick engagement and release during short takt times, supporting efficient hand‑assembly or automated sequences without complex interfaces. Consistent supply and trusted provenance for production use This solution pairs proven mechanical simplicity with assured availability from a reputable source. The solid arm and galvanised finish mean long service life in standard industrial environments, and the compact geometry supports modular fixture concepts. Choosing components with transparent technical data reduces procurement uncertainty and contributes to predictable uptime. For customers seeking centralised sourcing, Metav’s procurement and logistics in Emmerich act as a quality filter, ensuring consistent deliveries and conformity across batches — a pragmatic contribution to stable production planning. Contact Metav Werkzeuge for tailored technical advice on the Kukamet 211 vertical clamp and secure supply from our Emmerich warehouse Technical data SKU: 211-2-D-C1 GTIN: 8680731501148 eClass: 21041717 ETIM: EC011973 Facts Arm length: 62 mm Holding capacity: 1,400 N Pressing force: 1,200 N Weight: 0.206 kg Materials & features Material: zinc-plated Mounting: horizontal foot Massive holding arm Category: clamp Manufacturer: Kukamet FAQ What is the difference between holding capacity and pressing force? Holding capacity refers to the sustained force the clamp keeps once engaged; pressing force is the peak actuation force. The Kukamet 211 shows a holding capacity of 1,400 N and a pressing force of 1,200 N, ensuring secure fixation in short-cycle applications. Can this clamp be mounted on fixture plates? Yes, the horizontal-foot mounting suits attachment to flat plates and tables, making the clamp suitable for jigs and assembly fixtures where stable positioning is required. Is the clamp suitable for workshop environments with occasional moisture? The zinc-plated finish provides corrosion resistance for standard workshop atmospheres, extending service life and reducing the need for frequent maintenance. How compact is the clamp for integration into modular fixtures? With a 62 mm arm and a weight of 0.206 kg, the unit is designed to be space-efficient and easy to integrate into modular fixture concepts without significantly increasing moving mass. Which manufacturer produces this clamp and what is the SKU? The clamp is produced by Kukamet; product identification is SKU 211-2-D-C1 and GTIN 8680731501148. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
62mm Vertical Clamp With Solid Holding Arm And Safety Lock, 1400N Holding Force - Kukamet
Benefit from the combination of a solid 62 mm holding arm, an integrated safety lock and a galvanised finish to ensure dependable clamping performance in repetitive production tasks; order the Kukamet 211 vertical toggle clamp directly via Metav Werkzeuge or contact our consultants for application-specific guidance. Kukamet 211 Vertical toggle clamp — 62 mm arm, galvanised The 211 Vertical toggle clamp is a robust vertical clamping device designed for secure, repeatable workholding where a horizontal-foot mounting is required. Solid 62 mm holding arm Integrated safety lock Galvanised corrosion protection Horizontal base for stable mounting Consistent clamping that speeds up production A compact toggle clamp provides repeatable clamping with measurable forces, which reduces setup time and improves throughput. This model delivers a 1,200 N clamping capacity and a 1,400 N holding force, values that translate into secure fixation of parts during machining, assembly or welding. The consistent force curve of the mechanism minimises rework and rejects, supporting lean production goals and predictable cycle times. Safer handling thanks to a robust arm and locking mechanism Mechanical reliability is central to workplace safety. The clamp features a solid holding arm and an integrated safety lock to prevent unintended release under vibration or impact. The safety lock secures the toggle in the clamped position, reducing the risk of accidental opening during handling or downstream operations. This combination gives workshops and production lines a dependable, low-maintenance solution for repetitive tasks. Built for longevity and easy installation on fixtures A galvanised finish resists corrosion in workshop environments, extending service life when compared with untreated steel. The unit mounts via a horizontal base, allowing straightforward integration into jigs, fixtures and mounting plates without complex adaptation. The compact footprint and the 62 mm arm length make it suitable for confined spaces while still delivering effective leverage for stable clamping. Compact design that adapts to diverse applications Weighing just 0.235 kg, this toggle clamp is light enough for portable fixtures yet robust enough for industrial use. Its design supports a range of applications—from assembly jigs to holding components for inspection—and is compatible with standard fixture hardware. The combination of a short arm, secure locking and galvanised corrosion protection makes it a practical choice for workshops, small series production and maintenance operations. Speak with Metav Werkzeuge for availability and application advice on the Kukamet 211 vertical toggle clamp with its solid 62 mm holding arm and integrated safety lock Technical data Article number: 211-2-D-L-C1 GTIN: 8680731501179 ETIM: EC011973 eCl@ss: 21041717 Core technical data Arm: 62 mm Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.235 kg Features Material: galvanised Mounting: horizontal base Massive holding arm Integrated safety lock Category: toggle clamp / vertical clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet 211 vertical toggle clamp provides a clamping capacity of 1,200 N and a holding force of 1,400 N, suitable for secure fixation in many workshop and light industrial applications. Is the clamp suitable for corrosive or humid workshop environments? Yes, the clamp has a galvanised finish that offers enhanced corrosion resistance compared with untreated steel, extending service life in humid or workshop conditions. How is the clamp mounted to a fixture or jig? Mounting is via a horizontal base; the compact footprint allows direct attachment to plates or fixture blocks using standard fasteners. Can the clamp be used on portable fixtures or is it only for fixed installations? With a weight of 0.235 kg and a compact design, the clamp is suitable for both portable fixtures and fixed jigs in production or maintenance settings. What safety features are included to prevent accidental opening? The integrated safety lock secures the toggle in the clamped position, preventing unintended release during vibration or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
62mm Vertical Clamp With Solid Holding Arm, 1,200 N Clamping Force - Kukamet
Benefit from the combination of compact dimensions, a massive holding arm and dependable holding force for secure vertical clamping in fixtures. Order via Metav Werkzeuge or consult our specialists for integration advice. Vertical clamp 212 – Compact vertical clamping unit with 62 mm arm, Kukamet Vertical clamp 212 for secure vertical mounting and precise clamping in workshop jigs and industrial fixtures. 62 mm arm for compact fixtures Massive holding arm for robust clamping Blackened finish for corrosion resistance Holding force up to 1,400 N Secure clamping performance for production fixtures The Vertical clamp 212 delivers reliable, repeatable clamping through a high holding force of 1,400 N and a maximum pressing force of 1,200 N, ensuring workpieces remain stationary during machining or assembly. The heavy-duty arm construction provides consistent contact pressure while reducing the risk of movement-related rejects, which supports higher first-pass quality and less rework in series production. This clamp is engineered for endurance in demanding cycles, contributing to uninterrupted process flows. Compact design eases fixture integration With a 62 mm arm and a net weight of 0.207 kg, the clamp fits into space-constrained jigs and modular fixtures without adding unnecessary bulk. The vertical foot mounting allows direct attachment to plates or bases, simplifying retrofitting of existing tooling. The compact footprint shortens setup times and improves accessibility around the workpiece, supporting faster changeovers and more efficient use of bench or machine table real estate. Low-maintenance finish and robust construction A blackened finish provides corrosion resistance while maintaining a low-maintenance surface that withstands workshop environments. The massive holding arm is designed to resist bending and wear under repeated load, reducing downtime for replacement or adjustment. Together, these features prolong service life and contribute to lower total cost of ownership by limiting maintenance interventions and preserving clamping accuracy over time. Built for workshop and industrial use Designed for use in jigs, fixtures and assembly stations, this clamp supports a range of vertical clamping tasks where secure hold and compact integration are priorities. The combination of precise force figures, durable finish and straightforward mounting makes it suitable for production lines, toolrooms and maintenance workshops seeking dependable fixture components that integrate smoothly into standard clamping systems. For robust vertical clamping choose the Kukamet Vertical clamp 212 — contact Metav Werkzeuge for expert fitting guidance and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B212-2-D-C1 GTIN: 8682843522264 Manufacturer: Kukamet SKU: B212-2-D-C1 Material/Finish: blackened finish Core data Arm length: 62 mm Max pressing force: 1,200 N Max holding force: 1,400 N Weight: 0.207 kg ECLASS: 21041717 ETIM: EC011973 Special features Vertical foot mounting Massive holding arm Blackened finish Category: clamping Lever clamp reference Catalog page (PDF) available FAQ What maximum forces does the clamp provide? The Vertical clamp 212 offers a holding force of 1,400 N and a pressing force of 1,200 N; details are shown for SKU B212-2-D-C1. How is the clamp mounted in a fixture? Mounting is by a vertical foot; the clamp is designed for direct vertical attachment to plates and bases in jigs and fixtures. Which environments and applications suit this clamp? The unit is intended for workshop and industrial use in jigs, fixtures and assembly stations where compact, secure vertical clamping is required. What finish does the clamp have and how is maintenance handled? A blackened finish provides corrosion resistance and a low-maintenance surface; regular visual checks and basic cleaning extend service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
62mm Vertical Clamp With Solid Holding Arm, 1,200 N Push Force, Galvanised - Kukamet
Take advantage of a compact, space-saving clamping solution that pairs a 62 mm arm with a galvanised, corrosion-resistant finish and high holding capacity; the result is dependable, repeatable fixture clamping that keeps setups stable and production flowing. Order the unit directly via Metav Werkzeuge or consult the team for application-specific advice. Vertical clamp 212 — Vertical-foot lever clamp with 62 mm arm and galvanised finish (Kukamet) The Vertical clamp 212 is a compact vertical-foot lever clamp designed to secure workpieces in fixtures and jigs where a low profile and robust holding force are required. Massive holding arm, robust design 62 mm arm length for compact fixtures Vertical-foot mounting for stable installation Galvanised finish and 1,400 N holding force Reduce fixture footprint without compromising hold The compact construction and 62 mm arm make this clamping unit suitable for confined fixtures where space is at a premium. The short arm reduces overhang and the vertical-foot arrangement permits installation close to the workpiece, helping to lower the overall fixture profile. The combination of small form factor and high performance enables denser fixturing layouts, which can increase throughput on multi-station jigs. The enclosed lever action delivers predictable mechanical advantage, simplifying repeatable clamping operations. Dependable clamping force for repeatable production Engineered for consistent clamping, the device provides a holding force of 1,400 N and a maximum pressing force of 1,200 N, values that translate into secure fixation during machining, assembly or inspection cycles. These figures describe the mechanical capability rather than subjective feel; selecting a clamp with known force ratings supports process reliability and reduces the risk of part movement under load. The lever-actuated mechanism is optimised for frequent operation, ensuring reproducible results across repetitive production runs. Built for workshop environments and corrosion resistance Constructed with a galvanised finish, the clamp resists corrosion in standard workshop and light industrial conditions, extending service life while maintaining consistent performance. The massive holding arm increases rigidity at the contact point, reducing elastic deflection during application of clamping loads. At a nominal weight of 0.207 kg, the unit is light enough for easy handling during fixture assembly yet robust enough to resist wear from regular use, offering a practical balance between durability and manoeuvrability. Integration and practical benefits for engineering teams Designed as a lever clamp with a vertical-foot mounting, the component integrates readily into existing plates and tooling blocks, minimising adaptation work. The galvanised lever clamp suits fixtures used in manual and semi-automated processes, where fast actuation and secure clamping reduce cycle times and handling errors. Specifying this component in standardised fixtures supports interchangeability and simplifies spare part management across production lines. Specify the Kukamet Vertical clamp 212 for robust, space-saving clamping — contact Metav Werkzeuge for ordering details or technical clarification at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 212-2-D-C1 GTIN: 8680731501513 Brand: Kukamet Article: 212 eClass: 21041717 ETIM: EC011973 Facts Arm length: 62 mm Maximum holding force: 1,400 N Maximum pressing force: 1,200 N Weight: 0.207 kg Special features Material: galvanised Mounting: vertical-foot Design: lever clamp (vertical) Feature: massive holding arm FAQ What materials can this clamp be used with? The Vertical clamp 212 is suitable for general workshop clamping tasks; material compatibility depends on the fixture and contact pads selected, with the galvanised surface offering corrosion resistance for typical metalworking environments. How much force does the clamp apply during operation? Rated values for the Kukamet unit are a maximum pressing force of 1,200 N and a holding force of 1,400 N, which indicate the mechanical capacity for secure fixation in repetitive operations. How is the clamp mounted in a fixture? The device uses a vertical-foot mounting arrangement, enabling direct attachment to fixture plates or tooling blocks in a vertical orientation for low-profile fixturing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
6300 Kg Shock Absorber M16x81L, 145x95x144mm - Vertex
Take advantage of a compact, high-capacity design that combines robust load handling with simple integration and low handling weight for uninterrupted machine operation. Order the unit directly via Metav Werkzeuge or contact the consultants for application-specific advice. VSA-35K-PS-BL Shock Absorber — 6,300 kg capacity, M16x81L thread (Vertex) The VSA-35K-PS-BL is a compact industrial shock absorber designed for high-load deceleration and machinery protection in workshop and production environments. Robust 6,300 kg load capacity M16x81L thread for secure mounting Compact 145x95x144 mm footprint Lightweight 1.4 kg construction Heavy-duty deceleration that protects production The unit provides reliable energy absorption for equipment requiring strong, repeatable deceleration. With a 6,300 kg maximum load rating and a secure M16x81L threaded stud, the component is intended for demanding axial loads where controlled stopping reduces wear on machines and fixtures. This predictable performance helps to lower maintenance intervals and prevents unexpected downtime by limiting peak forces transmitted to structural elements and tooling. The technical specification translates directly into operational certainty for production planners and maintenance engineers. Compact form factor for straightforward retrofits A reduced footprint of 145 x 95 x 144 mm and a mass of just 1.4 kg enable integration into confined assemblies and facilitate handling during installation. The compact dimensions allow the absorber to be mounted close to impact points, shortening reaction paths and improving deceleration efficiency. The external thread ensures stable mechanical engagement into existing fixtures or mounting blocks, simplifying replacement without significant redesign of surrounding components. This combination of size and thread compatibility supports fast upgrades on existing machinery. Consistent operation and minimal upkeep Designed for robust, repeatable performance, the shock absorber delivers consistent deceleration cycles that support process stability. The construction focuses on simple integration and durable operation, reducing the need for frequent adjustments. Where system longevity and consistent stopping behaviour matter, the component contributes to predictable cycle times and less reactive maintenance. Sourcing through a proven distributor adds an additional layer of quality assurance for procurement and engineering teams. Contact Metav Werkzeuge for tailored application support on the Vertex VSA-35K-PS-BL — technical advice and supply coordination are available from Metav Werkzeuge in Emmerich (email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271) Technical Data SKU: VSA-35K-PS-BL GTIN: 4061905092824 Manufacturer: Vertex ECLASS: 27291201 Facts Dimensions: 145 x 95 x 144 mm Weight: 1.4 kg Max load: 6,300 kg Thread: M16x81L Special features Compact industrial shock absorber Designed for high axial loads Lightweight for easier handling SKU VSA-35K-PS-BL FAQ What maximum load can this shock absorber handle? The VSA-35K-PS-BL is rated for a maximum load of 6,300 kg, making it suitable for heavy-duty deceleration tasks in production settings. Which thread is used for mounting the absorber? Mounting is via an M16x81L threaded stud, providing a secure mechanical connection for direct installation into compatible fixtures. Is the unit suitable for retrofit into existing machinery? Yes, the compact dimensions (145 x 95 x 144 mm) and lightweight design of the Vertex shock absorber allow straightforward retrofitting into confined assemblies. How does this absorber improve machine uptime? By delivering consistent deceleration and limiting peak impact forces, the VSA-35K-PS-BL reduces wear on machine components and tooling, contributing to fewer breakdowns and lower maintenance frequency. Can the absorber be used in high-cycle applications? The design supports repeatable cycles and stable stopping behaviour, which is appropriate for many high-cycle industrial processes when specified within its load rating. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6300 Kg Shock Absorber M16x91L Thread, 145x95x136mm, 1.61kg - Vertex
Take advantage of the combination of high load capacity and a compact footprint for reliable impact absorption in confined machine spaces. Benefit from a standard M16 threaded connection and proven Vertex manufacturing for straightforward specification and supply via Metav Werkzeuge — contact our consultants for application advice. VSA-35K Shock Absorber by Vertex — M16 thread, 6,300 kg capacity A VSA-35K shock absorber designed for industrial machinery, providing robust impact damping and easy integration where space is restricted High load capacity 6,300 kg M16x91L threaded connection Compact 145×95×136 mm footprint Lightweight 1.61 kg for dynamic response Heavy-duty absorption that protects cycle accuracy and machinery The industrial shock absorber is built to absorb and dissipate kinetic energy at high loads, reducing peak forces transmitted to frames and moving parts. With a rated static capacity of 6,300 kg and a reinforced M16x91L threaded connection, the unit limits mechanical shock and supports consistent cycle timing in production equipment. Specifying a dedicated damper improves component life and reduces unplanned downtime by lowering fatigue on adjacent assemblies. The role of a shock absorber is explained here in practical terms: it converts impact energy into controlled motion and heat, preventing abrupt rebounds that cause wear. Compact footprint that eases retrofitting and layout design A small physical profile enables installation where bulkier devices would not fit. The damper’s 145×95×136 mm envelope and 1.61 kg mass allow placement close to actuators, conveyors or presses without major redesigns. This compact footprint minimises intrusion into limited installation zones and simplifies retrofitting, while the modest mass helps maintain the dynamic behaviour of light moving parts. For planners and maintenance teams, reduced system displacement and straightforward mounting translate into faster assembly and fewer alignment issues during commissioning. Engineered quality and traceable specification for procurement Manufactured by Vertex, the unit reflects industry-standard production controls and traceability, supporting transparent procurement and inventory management. The component carries a GTIN and SKU for unambiguous ordering and stock tracking, enabling efficient supply-chain processes. Choosing a recognised manufacturer and documented part reduces specification risk and aligns with quality assurance practices — an advantage for quality managers who must ensure repeatable performance across batches of equipment. Practical installation and selection notes for application planners The threaded M16x91L interface provides a common mechanical interface for mounting; pairing the damper with the correct grade of nut and washer ensures secure seating and predictable behaviour under load. When selecting a damper, match the rated capacity to expected peak loads rather than nominal operating weight to maintain a safety margin. Where machine dynamics are critical, the low mass and compact design support rapid response without excessive added inertia, making this shock absorber suitable for both intermittent impacts and frequent cycling applications. Request a detailed application check or rapid supply via Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored specification and delivery guidance Technical data Article number: VSA-35K GTIN: 4061905090288 Manufacturer: Vertex Facts Max load: 6,300 kg Dimensions: 145 x 95 x 136 mm Weight: 1.61 kg Thread: M16x91L Special features Shock absorber for industrial applications Compact design for tight integration Threaded connection for standard mounting Vertex manufacturing quality FAQ What maximum load can the shock absorber handle? The shock absorber is rated for a maximum load of 6,300 kg, ensuring suitability for heavy-duty impact applications. Which threaded connection is used for mounting? Mounting is via an M16x91L threaded connection, compatible with standard M16 nuts and washers for secure installation. Is the damper suitable for retrofitting into existing equipment? Yes, the compact 145×95×136 mm footprint and modest mass allow straightforward retrofitting into constrained machine spaces. How does the VSA-35K differ from lighter vibration isolators? The VSA-35K is engineered for impact absorption at high loads rather than general vibration isolation, offering a higher static capacity and robust construction for repeated shocks. Can the product be specified using a catalogue reference? The unit is available under the SKU VSA-35K and GTIN 4061905090288 for unambiguous ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6300 Kg Shock Absorber M16x91L Thread, 145x95x140mm, 1.61kg - Vertex
The combination of a very high load capacity and a compact footprint makes this shock absorber a dependable choice for heavy-duty machinery and tight installations; order directly via Metav Werkzeuge or request expert advice from our consultants. VSA-35K-6RU shock absorber — 6,300 kg capacity, M16x91L thread | Vertex The VSA-35K-6RU is a heavy-duty shock absorber engineered for industrial machinery and fixtures where a compact unit must absorb large static and dynamic loads. High load capacity 6,300 kg Compact dimensions 145 x 95 x 140 mm M16x91L robust threaded connection Lightweight at 1.61 kg High load performance for heavy-duty operations The VSA-35K-6RU shock absorber delivers a rated capacity of 6,300 kg, providing a clear benefit in applications where peak forces must be managed without increasing component size. A high nominal load rating translates into a reduced risk of deformation under static conditions and a measurable lowering of transmitted shock in service, which supports longer equipment life and improved operational reliability. For production environments, this means fewer unexpected stops and a more consistent process output. Space-saving design that eases integration With compact dimensions of 145 x 95 x 140 mm, the unit is suited to installations where space is at a premium. The small footprint enables integration into tight assemblies and simplifies retrofitting older equipment without major redesign. This compactness also facilitates modular layouts in jigs and fixtures, reducing the need for additional structural supports while maintaining effective energy absorption and preserving machine geometry. Secure threaded connection for dependable mounting The M16x91L threaded connection provides a familiar and robust interface for bolted assemblies; the specification denotes a metric M16 thread with a 91 mm length suitable for firm anchorage. A unit weight of 1.61 kg aids handling during installation and replacement, yet the design maintains a secure fastening under high load. Clear thread sizing reduces ambiguity during procurement and supports standard mounting hardware practices in industrial environments. Reduced downtime through consistent damping and durability Choosing a compact absorber with a high static rating contributes directly to increased uptime and lower scheduled maintenance. By moderating impact forces, the device helps protect adjacent components and bearings, which in turn reduces the frequency of wear-related service actions. For operations aiming to balance performance with simplicity, this configuration offers cost-efficient protection that supports predictable maintenance cycles and steady production. Request a specification sheet or technical consultation from Metav Werkzeuge in Emmerich to assess the Vertex VSA-35K-6RU for a specific assembly or machine application Technical data SKU: VSA-35K-6RU GTIN: 4061905090103 ECLASS: 27291201 Brand: Vertex Facts Maximum load: 6,300 kg Dimensions: 145 x 95 x 140 mm Weight: 1.61 kg Thread: M16x91L Special features Product type: Shock absorber Suitable for heavy-duty load damping Compact form factor for tight assemblies FAQ What maximum load can this shock absorber handle? The Vertex VSA-35K-6RU has a rated maximum load of 6,300 kg, making it suitable for demanding, heavy-duty applications where high static support is required. How is the unit mounted? Mounting is via a metric M16 thread with a 91 mm length (M16x91L), which allows for standard bolted installation in industrial fixtures and machines. Is the absorber suitable for retrofitting older machinery? Yes, the compact dimensions and standard threaded connection make the VSA-35K-6RU a practical option for retrofits where space is limited and firm attachment is needed. What handling or lifting considerations apply? At a weight of 1.61 kg the unit is straightforward to handle manually during installation, though appropriate lifting practice should be followed for elevated or awkward positions. How does this component affect maintenance intervals? By absorbing impact loads and reducing transmitted shock, the absorber helps protect surrounding components and can contribute to extended maintenance intervals and improved equipment reliability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6300 Kg Shock Absorber M16x91L Threaded, 145x95x134mm, 1.4kg - Vertex
Take advantage of the combination of high load capacity, compact design and reliable threaded connection for consistent machine damping. Benefit from robust engineering and straightforward specification data when planning installations — order the shock absorber directly via Metav Werkzeuge or consult our specialists for tailored advice. VSA-35K-PS Shock absorber — 6,300 kg capacity, M16x91L threaded connection The VSA-35K-PS is a compact industrial shock absorber designed for heavy-duty machinery, providing controlled energy dissipation in tight installation spaces. High 6,300 kg load capacity M16x91L threaded connection Compact 145×95×134 mm footprint Robust 1.4 kg construction Consistent damping for heavy loads The unit delivers controlled energy absorption suited to demanding industrial environments. Its 6,300 kg load capacity ensures repeatable deceleration where inertia is high, reducing stress on frames and fixtures. The working principle is based on progressive resistance: as kinetic energy rises, the damping element converts motion into heat in a predictable curve, protecting downstream components and extending service intervals through subdued shock transmission. Space-saving installation and secure mounting Compact dimensions and a standard M16x91L thread allow machine designers to integrate effective damping without major design changes. The small 145×95×134 mm footprint and modest 1.4 kg mass simplify retrofit work and keep additional mass low on moving axes. A threaded connection provides a positive mechanical interface that resists loosening under cyclical loads; when combined with conventional locking methods, it yields a durable attachment suitable for repetitive impact applications. Reliable operation and specification clarity Constructed for industrial use, the absorber is specified for repeatable duty cycles and stable performance over time. Clear technical values — including thread form, load rating and compact envelope — assist planners in selecting an appropriate component and predicting system behaviour. Sourcing through an experienced partner reduces procurement risk: Metav Werkzeuge acts as a quality filter for the European market, supporting consistent supply and conformity to intended application requirements. Contact Metav Werkzeuge in Emmerich to arrange supply of the Vertex VSA-35K-PS shock absorber and to discuss compatibility with existing machinery. Technical data SKU: VSA-35K-PS GTIN: 4061905090615 Eclass: 27291201 Manufacturer: Vertex Key specifications Load capacity: 6,300 Kg Thread: M16x91L Dimensions: 145×95×134 mm Weight: 1.4 kg Product details Product type: Shock absorber Brand: Vertex Image available: VSA-35K-PS-main.png FAQ What maximum load can this shock absorber handle? The VSA-35K-PS is specified for a maximum load of 6,300 kg, which makes the Vertex shock absorber suitable for heavy-duty damping tasks in industrial equipment. Which thread does the unit use for mounting? Mounting is via an M16x91L threaded connection, providing a standard mechanical interface for secure attachment and easy integration into existing assemblies. Are the dimensions suitable for retrofit into compact machines? Yes. With external dimensions of 145×95×134 mm and a weight of 1.4 kg, the VSA-35K-PS offers a compact footprint that supports retrofit applications in constrained spaces. How does this absorber improve machine longevity? By converting impact energy into controlled resistance, the shock absorber reduces transmitted forces to frames and bearings, lowering fatigue and maintenance frequency for connected components. Is technical documentation available for planning and verification? Technical specifics such as load rating, thread form and dimensional data are provided for the VSA-35K-PS to assist in design validation and component selection. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
630mm Drawbar 5/8-11UNF Thread Heavy-Duty Toolholder Drawbar - Vertex
Take advantage of the combination of precise retention, sturdy threading and extended reach to maintain consistent machining quality. Order the drawbar directly via Metav Werkzeuge or ask our consultants if needed. VDR-NT40I-A drawbar (630 mm, 5/8-11UNF) by Vertex The VDR-NT40I-A drawbar secures NT40 tool holders in machine spindles, providing extended reach for deep-mounted fixtures and reliable clamping during machining. 630 mm length for extended reach 5/8-11UNF threaded connection Robust design by Vertex, weighs 1.3 kg Improved tool retention for predictable machining results A consistent clamping interface reduces tool run-out and the need for frequent adjustments. The drawbar principle converts spindle actuation into axial clamping, producing the repeatability required for tight tolerances. With a 630 mm overall length the component is suited to setups where tools sit deeper in the spindle or where fixtures require extra reach. The 5/8-11UNF thread delivers a standardised mechanical connection that supports stable transmission of clamping forces, limiting vibration and improving surface finish. These measurable properties help to cut rework and increase uptime in production environments. Reliable design that simplifies maintenance and handling Weight and geometry influence handling and replacement intervals. At 1.3 kg the shaft balances robustness with manageable handling for operators during maintenance or換out. The standardised threaded interface reduces tooling complexity and supports compatibility with established NT40 tool-holder systems. Where technical terms are unfamiliar: a drawbar is the axial rod inside the spindle that pulls and holds the tool holder by engaging the threaded section; the thread specification (5/8-11UNF) defines the mating connection and is critical for correct clamping action. The straightforward mechanical design means no electronics to fail and minimal upkeep beyond regular inspection. Practical workflow benefits for workshops and production shops Integrating a dependable clamping component supports faster tool changes and steadier processes, translating into lower scrap rates and predictable cycle times. The product’s Vertex provenance signals attention to manufacturing standards and component fit, which is particularly valuable for small and medium-sized workshops seeking industrial-grade reliability without complex procurement. Metav’s role as a quality filter in Emmerich ensures consistent supply and product conformity across the European market, backed by a broad range of precision tools and decades of distribution experience. Choosing a proven clamping rod contributes to a safer, more efficient shopfloor. For supply and application advice on the VDR-NT40I-A drawbar, contact Metav Werkzeuge in Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VDR-NT40I-A GTIN: 4061905094804 ECLASS: 23309104 Facts Length: 630 mm Weight: 1.3 kg Thread: 5/8-11UNF Special features Brand: Vertex SKU: VDR-NT40I-A Image: VDR-R8-S-main.png FAQ Is this drawbar compatible with NT40 tool holders? The VDR-NT40I-A drawbar is intended for NT40 interfaces and is supplied with the specification matching common NT40 tool-holder systems. What thread does the drawbar use and why is that important? The component uses a 5/8-11UNF thread; this standardised thread ensures a secure mechanical connection and consistent transmission of clamping force for repeatable concentricity. How long is the drawbar and what advantage does that provide? With a length of 630 mm, the rod offers extended reach for deep-mounted tools or fixtures, reducing the need for additional extensions. What is the weight and does it affect handling? Weighing 1.3 kg, the shaft combines sturdy construction with manageable handling for routine installation and maintenance. Are there any special maintenance requirements? Routine inspection for thread wear and cleanliness is recommended; the simple mechanical design means maintenance is limited to visual checks and standard cleaning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
630mm Independent Four-Jaw Chuck, 4-M20 T-Slots, 280 r.p.m., 162 kg - Vertex
Combine the 630 mm swing capacity, independent jaw adjustment and a robust 162 kg construction for reliable, vibration‑resistant workholding — order the independent four‑jaw chuck directly via Metav Werkzeuge or consult our specialists for application advice. VKC-25 independent four‑jaw chuck — 630 mm diameter, 280 r.p.m., Vertex The VKC-25 independent four‑jaw chuck provides adaptable lathe clamping for large turning and heavy‑duty machining operations, offering a solution for irregular and asymmetrical workpieces where controlled, individual jaw adjustment is required *Independent jaw adjustment for irregular blanks *630 mm swing for large workpieces *Rated speed 280 r.p.m. for stable rotation *Robust 162 kg cast construction Heavy‑duty stability for large turning operations The construction of this chuck focuses on stable, repeatable clamping for demanding turning tasks: the 630 mm swing capacity combined with a 162 kg cast body delivers a low centre of gravity and reduced vibration during rotation. The mass and geometry of the assembly provide a solid foundation for machining larger diameters, which in turn supports consistent surface quality and longer tool life. Operators will benefit from more predictable dynamic behaviour on the machine spindle when processing heavy or elongated components. Precision clamping for complex and asymmetrical parts Individual jaw control enables exact centring and adaptation to non‑cylindrical blanks, converting manual adjustments into dependable clamping accuracy. The independent design of the chuck allows correction of runout and off‑centre stock without modification to the workpiece, improving precision and shortening setup time. This targeted adjustability supports higher effective throughput in batch production of bespoke parts and reduces the need for secondary fixturing operations. Mounting compatibility and operational efficiency Mounting provisions include 4‑M20 t‑slots for secure attachment to compatible faceplates or adapters, simplifying integration into existing lathe setups. The nominal running speed of 280 r.p.m. is specified for stable performance with substantial workpiece mass. Supplied as a heavy‑duty clamping solution from Vertex, the design emphasises durability and low maintenance, with straightforward access for routine inspection and lubrication to preserve clamping integrity over extended service intervals. For advice on machine compatibility or to discuss how the VKC‑25 from Vertex can be integrated into a specific production line, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 for specialist guidance. Technical data Article number: VKC-25 GTIN: 4061905086557 Brand: Vertex Core specifications Diameter: 630 mm Max speed: 280 r.p.m. Weight: 162 kg T‑slots: 4‑M20 eClass: 21020490 Special features Independent four‑jaw operation Suitable for large turning work SKU/UID: VKC-25 Image available FAQ What maximum workpiece diameter can be clamped? The chuck supports a swing capacity of 630 mm, allowing secure clamping of large diameters with the VKC‑25 independent four‑jaw chuck from Vertex. Is the chuck suitable for irregular or asymmetrical parts? Yes, the independent jaw design permits individual adjustment of each jaw, making the chuck ideal for clamping irregular blanks and enabling precise centring without additional fixtures. What rotational speed is recommended for safe operation? The VKC‑25 is specified for operation up to 280 r.p.m., which provides stable rotation for substantial workpiece masses. How is the chuck mounted to the lathe spindle or faceplate? Mounting is accommodated via 4‑M20 t‑slots, allowing secure attachment to appropriate adapters or faceplates compatible with the lathe setup. How does the chuck weight affect machining performance? At 162 kg the construction enhances stability and dampens vibration, contributing to improved surface finish and reduced tool wear during heavy‑duty turning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
630mm Pull Rod M16x2P Thread, NT40 Tool Holder Accessory - Vertex
Take advantage of a robust M16x2 thread and a length of 630 mm for reliable tool retention and straightforward handling; combine this with Vertex quality for consistent spindle connection and order the drawbar directly via Metav Werkzeuge or request advice from our consultants. Vertex drawbar VDR-NT40M-A – M16x2 thread, 630 mm length The Vertex drawbar VDR-NT40M-A is a dedicated NT40 taper retention rod designed to secure toolholders in milling spindles for machining applications. Compatible with NT40 toolholders M16x2 thread for secure engagement Length 630 mm for extended reach Weight 1.3 kg for easy handling Reliable clamping for stable machining The retention rod delivers a secure retention solution through its standard M16x2 thread, ensuring the clamping mechanism engages positively with NT40 toolholders. This connection reduces axial movement during cutting, which in turn supports repeatable machining results. The engineering focus is on repeatability and dependable mechanical contact rather than decorative details, so operators can expect consistent performance where stability matters most. Practical dimensions that aid workshop efficiency With an overall length of 630 mm and a mass of 1.3 kg, the bar offers reach without becoming cumbersome. The extended length is useful when working with longer toolholders or deeper spindle assemblies, while the moderate weight makes manual handling and installation straightforward during tooling changes. These physical parameters support faster setup times and minimise the need for additional handling tools in routine operations. Precision fit to reduce downtime Manufactured by Vertex, the rod features a precision fit that helps lower the risk of tool slippage and vibration-induced errors. A consistent thread form and accurate overall length contribute to reliable axial positioning of the toolholder, which can help reduce scrap rates and rework. For workshops aiming to maintain throughput, the drawbar acts as a simple, durable component that contributes to overall process stability. Contact Metav Werkzeuge in Emmerich for personalised technical advice on the Vertex drawbar VDR-NT40M-A and assistance selecting the correct NT40 retention solution — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VDR-NT40M-A GTIN: 4061905095184 Manufacturer: Vertex Facts Length: 630 mm Weight: 1.3 kg Thread: M16x2P Special features ECLASS: 23309104 Category: Vertex UID: VDR-NT40M-A FAQ What spindle taper is this rod intended for? The Vertex drawbar VDR-NT40M-A is intended for NT40 taper spindles and secures compatible NT40 toolholders. Which thread does the retention rod use? The retention rod uses an M16x2 thread for engagement with the spindle clamping mechanism. Is the length suitable for deep spindle assemblies? The 630 mm length of the VDR-NT40M-A provides extended reach suitable for deeper spindle or toolholder arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com