6mm M5 Threaded Reaming Tool Solid Carbide TiN Coated Self-Centering 3-Flute 15mm Cutting Length 1800 RPM - TECWERK

Efficient removal of broken taps is delivered by combining solid carbide construction with a TiN coating and a self‑centring design for reliable chip control; order directly via Metav Werkzeuge or consult the technical team for application advice.

Thread extraction drill M5, solid carbide, TiN, Z=3 — TECWERK solid carbide tap‑removal drill, TiN‑coated

The Thread extraction drill M5, solid carbide, TiN, Z=3 is a purpose‑built drilling tool for removing broken HSS and HSS‑Co taps, featuring a cylindrical shank and straight flutes for secure seating and controlled chip evacuation.

• Solid carbide construction
• TiN‑coated for longer life
• Self‑centring, straight flutes
• For drilling out broken HSS taps

Precise removal of broken taps with minimal rework

The extractor is engineered to remove fractured taps cleanly from threaded holes, reducing rework and scrap. Its self‑centring geometry ensures that the tool locates the broken tap reliably, while the straight flutes guide chips away from the hole. The tool’s core hole Ø 4.2 mm and 3 flutes provide stable cutting engagement, so alignment errors are minimised and subsequent thread repair or retapping becomes straightforward. This focus on repeatable accuracy supports a smooth production flow and predictable results.

Long service life through material and coating selection

Constructed from solid carbide (VHM) and finished with a TiN coating, the tool resists abrasion and heat during interrupted cuts. The combination of carbide substrate and surface coating reduces flank wear and extends tool life compared with uncoated alternatives. With a chip length of 15 mm and robust cutting geometry, the drill withstands the stresses of extracting brittle HSS and HSS‑Co taps while maintaining dimensional stability over multiple cycles, enhancing overall process economy.

Practical handling and speed recommendations for reliable results

The extractor has a shank Ø 6 mm, suitable for standard chucks and collets that accept this diameter, and is supplied as a straight‑shank solid tool for easy clamping. Recommended operating speeds are 1,500–3,500 rpm, with a commonly used reference speed of 1,800 rpm depending on machine rigidity and clamping. The design facilitates safe chip evacuation and reduces clogging during operation, so users achieve consistent extraction without excessive force or risk to the workpiece.

Contact Metav Werkzeuge today to confirm suitability for specific tap sizes or materials and to secure technical procurement assistance from the specialists in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930

Technical data

• Article number: 2000867717NW
• Product name: Thread extraction drill M5, solid carbide, TiN, Z=3
• Brand: TECWERK
• Packaging unit: 1

Key measurements

• Shank Ø: 6 mm
• Chip length: 15 mm
• Core hole Ø: 4.2 mm
• Number of flutes: 3
• Recommended speed: 1,500–3,500 rpm
• Typical operating speed: 1,800 rpm

Features and materials

• Solid carbide (VHM)
• TiN‑coated
• Cylindrical shank
• Self‑centring
• Straight‑fluted geometry
• For drilling out broken HSS and HSS‑Co taps

FAQ

How does the extractor remove broken taps?
The threaded fragment is drilled out using the Thread extraction drill M5, solid carbide, TiN, Z=3, whose self‑centring and straight‑flute design centres on the broken tap and evacuates chips to allow safe extraction.

Which tap types is this tool intended for?
This extractor is designed specifically for fractured HSS and HSS‑Co taps and performs the mechanical removal task without the need for special consumables.

What speeds should be used for safe operation?
Operate within 1,500–3,500 rpm as a guideline; 1,800 rpm is a typical reference point depending on machine rigidity and clamping quality when using the TECWERK extractor.

Will the shank fit standard chucks?
The tool has a 6 mm shank, suitable for standard chucks and collet systems that accept this diameter, allowing secure clamping during the extraction process.

What are the main construction and coating benefits?
Made from solid carbide (VHM) and TiN‑coated, the drill offers higher wear resistance and thermal stability, which extends tool life during the demanding task of removing broken taps.

TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund