3mm Allen Key Hex L-Shaped, Chrome-Plated - Teknik Makina

Compact and robust, the locking screw combines a M6 thread with a precise 11.2 mm seat to secure indexable inserts reliably; its 14 mm overall length and compatibility with a 3 mm Allen key make installation and maintenance straightforward. Order the locking screw directly via Metav Werkzeuge or consult our experts for an application-specific recommendation. Locking screw TC050TM — Locking screw for indexable inserts, M6 thread, 11.2 mm (Teknik Makina) The Locking screw TC050TM secures indexable inserts in turning and milling clamping systems, designed for compact, repeatable clamping in production environments *Locking screw for indexable inserts M6 thread *11.2 mm diameter for precise seat alignment *14 mm overall length for compact clamping *Operated with 3 mm Allen key for easy tightening Reliable clamping that reduces rework and stoppages A compact locking screw with an M6 thread and a finely controlled 11.2 mm seat diameter delivers consistent clamping force that helps prevent insert movement during machining. The stable connection improves repeatability, which in turn reduces the risk of rework and unscheduled stops. With a modest mass of 0.1 kg, the component contributes negligible inertia yet provides a positive mechanical connection; its 14 mm overall length suits tight toolholder geometries and keeps the tool assembly compact. Fast service intervals and simple workshop handling Maintenance and replacement are straightforward thanks to the standard 3 mm Allen key interface, enabling rapid intervention during tool changes or routine checks. Fewer specialised tools are required, which simplifies stockholding and shortens turnaround times in busy workshops. The straightforward geometry of the fastener reduces the likelihood of cross-threading and saves time during assembly, supporting predictable maintenance cycles and smooth production flow. Compatibility that supports standardisation and supply reliability Designed as a practical fastening solution for indexable inserts, the component aligns with common clamping concepts used across turning and milling toolholders. Sourcing through Metav Werkzeuge ensures access to a broad supply chain and a quality filter based in Emmerich, which supports timely deliveries and consistent product quality. The part is manufactured by Teknik Makina and listed under SKU TC050TM, providing clear traceability for procurement and inventory management. For procurement or application advice relating to this Teknik Makina locking screw, contact Metav Werkzeuge for tailored recommendations and reliable supply solutions Technical data Article number: TC050TM Name: Locking screw for indexable inserts Manufacturer: Teknik Makina Facts Diameter: 11.2 mm Thread: M6 Overall length: 14 mm Weight: 0.1 kg Compatibility & operation Operated with 3 mm Allen key Suitable for indexable inserts Intended for compact clamping systems FAQ What is the thread size of the locking screw? The locking screw TC050TM is specified with an M6 thread for secure clamping in standard insert holders. Which tool is required to operate the fastener? Assembly and removal are performed with a 3 mm Allen key, matching the design of the locking screw. Is the fastener suitable for compact toolholders? Yes, the 14 mm overall length and 11.2 mm seat diameter make the fastener appropriate for confined clamping geometries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, reliable solution for secure caliper fixation: the combination of an M5 thread and Ø 10 mm head delivers dependable clamping force, while the 26 mm overall length keeps the fastener unobtrusive in tight assemblies — order via Metav Werkzeuge or consult our specialists for product selection and supply. Locking screw by Teknik Makina — M5 thread, 26 mm overall length Locking screw for secure retention in measuring equipment and light workshop assemblies; designed for simple tightening with a 3 mm Allen key. M5 thread for standard fittings Ø 10 mm head for positive engagement 26 mm overall length for compact installation Requires 3 mm Allen key for assembly Reliable fixation for precision measuring instruments The fastener provides a consistent locking function that is particularly useful where repeatable position retention is required. With an M5 thread and a modest head diameter, the component achieves firm clamping without adding bulk. This makes it well suited to applications where space is limited but stability cannot be compromised. The technical simplicity of the design reduces maintenance needs and supports long-term serviceability in workshop environments. Quick installation and workshop compatibility Installation is straightforward thanks to the standard thread form and the compatibility with a common Allen key 3 mm. The combination of a small head (Ø 10 mm) and 26 mm length allows easy access even in confined setups, so adjustments can be made efficiently during measurement tasks or device servicing. For questions about fit or if additional technical data are required, Metav Werkzeuge offers detailed guidance and can advise on part selection and supply logistics — contact details are provided below. Built for dependable everyday use Though compact, this fastener is designed to perform reliably in routine workshop conditions. The lightweight design keeps added mass to a minimum (approx. 0.1 kg), while the standard M5 specification ensures compatibility with common fixtures and measuring tools. Sourcing from a specialist manufacturer such as Teknik Makina supports consistent component quality and traceability, contributing to fewer interruptions in production and measurement workflows. Contact Metav Werkzeuge for part TC046TM from Teknik Makina for secure caliper retention and expert advice on integration into your workshop setup Technical data Article number: TC046TM Manufacturer: Teknik Makina eClass: 21189290 Weight: 0.1 kg Facts Diameter: 10 mm Thread: M5 Overall length: 26 mm Special features Locking function Requires Allen key 3 mm Compact head for tight assemblies FAQ What is the thread specification of this locking screw? The locking screw is supplied with an M5 thread; refer to SKU TC046TM for exact matching. Which tool is required to tighten the component? Tightening is performed with an Allen key 3 mm, as specified for the part from Teknik Makina (TC046TM). What are the head diameter and overall length? Head diameter is 10 mm (Ø 10 mm) and overall length is 26 mm, suitable for compact installations. Is the fastener suitable for use in measuring instruments? Yes, the component is designed as a locking screw intended to secure positions within measuring equipment and similar small assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a metric M6 thread, a compact 9.5 mm diameter and a 22 mm total length ensures secure clamping with minimal axial play; ideal for high-repeatability milling setups. Order the screw directly via Metav Werkzeuge or consult our team for application-specific guidance. Screw for End Mill TC181TM — M6 thread, 9.5 mm diameter (Teknik Makina) The Screw for End Mill TC181TM is a retention fastener designed to secure end mill shanks in milling holders and adaptors, providing stable clamping for precision cuts. M6 standard thread for secure clamping Diameter 9.5 mm for tight fit Total length 22 mm for compact assemblies Hex key 3 mm compatible with Allen wrench Secure clamping that improves tool stability and repeatability A compact retention screw such as this is a straightforward way to reduce axial and radial movement in the toolholder. With a metric M6 thread and a 9.5 mm diameter, the fastener creates consistent contact pressure across the clamping interface, which reduces runout and enhances concentricity during milling. The result is fewer rework cycles and more predictable tool life, translating directly into improved process efficiency for production and repair workshops. Quick serviceability for reduced downtime Maintenance cycles benefit from a simple design that is compatible with a 3 mm Allen key, enabling fast replacement or retightening at the bench or on the machine. The 22 mm total length keeps the assembly compact while allowing enough engagement for reliable fixation, so changeovers are completed swiftly without special tooling. This eases everyday workshop routines and supports higher machine availability — a practical advantage for busy job shops and production lines. Designed for integration with standard holders and workshop logistics Manufactured to fit conventional end mill shank arrangements, the component follows familiar metric conventions making it straightforward to match with existing holders and adaptors. The screw’s lightweight nature and standard geometry simplify inventory management and spare-part planning. Combined with Metav Werkzeuge’s sourcing and quality-filtering from Emmerich, procurement becomes more dependable, helping to centralise supplies and support a smoother workflow across industry, craft and trade operations. For tailored advice on matching this Teknik Makina retention screw to specific holders or to secure appropriate spares, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC181TM Name: Screw for End Mill Manufacturer: Teknik Makina Weight: 0.1 kg Facts Diameter: 9.5 mm Thread: M6 Total length: 22 mm Weight: 0.1 kg Special features Compatible with 3 mm Allen key Suited for end mill shanks Metric M6 thread standard FAQ Is this screw compatible with standard end mill holders? The TC181TM screw is intended for use with holders that accept a metric M6 thread and a 9.5 mm clamping interface; verification of the holder thread and bore is recommended before installation. Which tool is required to tighten the fastener? A 3 mm Allen key (hex key) is specified for the retention screw, allowing straightforward tightening and removal at the machine or workshop bench. How often should the screw be inspected or replaced? Inspect the screw periodically for thread wear, deformation or corrosion; replacement is advised when secure clamping can no longer be achieved to maintain the integrity of the clamping system. What is the SKU and who manufactures this component? The SKU is TC181TM; the part is supplied by Teknik Makina and intended as a retention screw for end mill assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, metric fastening that combines a precise M5 thread, a low-profile 12 mm overall length and compatibility with common assembly tools for reliable shim and U-plate clamping; order directly via Metav Werkzeuge or consult the team for detailed application advice Screw for Shim (TC095TM) — M5 thread, 12 mm overall length, Teknik Makina The Screw for Shim is a dedicated fastening solution designed for secure attachment of U-plates and shims in workshop and light industrial applications M5 thread for secure clamping 12 mm overall length for low profile fit 9.5 mm head diameter for stable seating Reliable metric thread for consistent clamping results The threaded design with a M5 thread provides a predictable load-bearing capacity and repeatable torque response, making this fastener suitable where joint stability matters. The combination of M5 thread and a controlled head diameter ensures secure seating in shims and U-plate assemblies, reducing the risk of loosening under vibration. Specified as TC095TM, this part is intended for straightforward integration in production and maintenance workflows where metric fastenings are standardised Compact form factor that saves space and simplifies assembly With an overall length of 12 mm and a head diameter of 9.5 mm, the component keeps protrusion to a minimum and helps maintain neat, space-saving assemblies. The short length reduces interference with adjacent parts and speeds up handling during installation. Designed for use with an Allen key 3 mm, the fixing permits quick, tool-based tightening with common hex keys, streamlining fitting procedures on jigs, fixtures and mounting plates Clear specifications for procurement and workshop planning Key measurable attributes are presented for easy comparison and inventory management: Diameter 9.5 mm, Thread M5, Overall length 12 mm and Weight 0.1 kg. These values support purchasing decisions and ensure compatibility with existing shims and U-plate configurations. Supplied by Teknik Makina and stocked via Metav Werkzeuge, the item is positioned as a pragmatic choice where reliable metric fastenings are required Contact Metav Werkzeuge today for order placement or application guidance on Teknik Makina fastenings such as TC095TM; assistance and local supply details are available from Metav Werkzeuge in Emmerich Technical Data Article number: TC095TM Manufacturer: Teknik Makina Designation: Screw for Shim Facts Diameter: 9.5 mm Thread: M5 Overall length: 12 mm Weight: 0.1 kg Special features Fastening screw for U-plate / shim Compatible with Allen key 3 mm ECLASS: 21189290 FAQ What thread size does this screw use? The screw uses an M5 thread, specified for reliable metric fastening in shim and U-plate applications and identified as TC095TM by Teknik Makina. Is the screw suitable for U-plates and shims? Yes, the Screw for Shim (TC095TM) is designed specifically for securing shims and U-plate fittings with a stable head diameter and short overall length. Which tool is required for installation? Installation requires an Allen key size 3 mm, enabling fast and repeatable tightening with standard hex keys. What are the core dimensions to check for fitment? Key dimensions to verify are 9.5 mm head diameter, M5 thread, and 12 mm overall length for correct seating and clearance in assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure fastening is achieved through the combination of a standard M8 thread and a compact 21 mm profile, together with simple adjustment using a 3 mm Allen key — order directly via Metav Werkzeuge or consult our technical advisors for compatibility checks. Locking screw TH821TM — M8 thread, 21 mm compact locking screw (Teknik Makina) A Locking screw TH821TM designed for secure clamping on precision calipers and similar measuring instruments, operated with a 3 mm Allen key for straightforward installation and adjustment Secure M8 thread for firm clamping Compact 21 mm length for tight assemblies Fits 3 mm Allen key for easy adjustment Reliable fastening for precision measuring equipment The component features a standard M8 thread that provides a predictable interface for clamping points in measuring equipment. This thread size is widely used in workshop fixtures, so the fastener ensures secure clamping and minimal axial play during measurement cycles. Reduced movement at the contact point improves repeatability and contributes directly to consistent measurement results in everyday inspection tasks. Compact design for confined assemblies and quick adjustment With a total length of 21 mm the fastener is tailored for installations where space is limited; its low profile permits neat integration without adding bulk to the measuring setup. Adjustment is performed with a 3 mm Allen key, which allows fast, controlled torque application and simplified maintenance during routine checks. The compact form factor supports rapid replacement and minimal downtime in production or service environments. Workshop-ready specification and procurement benefits Weighing only 0.1 kg, the item is light to handle and suitable for stocked spare-part programmes where standardisation reduces procurement complexity. The Teknik Makina origin signals compatibility with common industrial tolerances and supports interchangeability across M8 mounting points. For specification enquiries, Metav’s technical team can provide advice on fitment and spare-part planning to streamline workshop logistics. For supply and technical guidance on the TH821TM locking screw from Teknik Makina, contact Metav Werkzeuge — technical enquiries by eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: TH821TM Manufacturer: Teknik Makina Weight: 0.1 kg Dimensions & thread Thread: M8 Total length: 21 mm Compatibility & application Operates with 3 mm Allen key Intended for securing precision calipers and measuring tools FAQ How is the locking screw adjusted? The TH821TM locking screw is adjusted using a 3 mm Allen key; rotate until firm engagement is achieved, avoiding excessive torque that could distort the measuring instrument. Is this fastener suitable for precision calipers? Yes. The component is intended to secure precision calipers and similar measuring tools, offering an M8 thread and a compact 21 mm form suitable for confined mounting points. Can the TH821TM replace other M8 locking screws? Where the mounting interface accepts an M8 thread and the available axial clearance accommodates a 21 mm length, the TH821TM can be used as a compatible replacement. What are the key dimensions and weight to check for inventory management? Key specification points are: M8 thread, 21 mm total length and 0.1 kg weight; use these values when planning spares and storage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the secure fit provided by the M5 thread and the compact 16 mm overall length to maintain stable tool clamping and consistent machining results; combine reliable performance with quick servicing and order via Metav Werkzeuge or ask the Metav consultants for technical guidance. Screw TC178TM by Teknik Makina — M5 thread, 16 mm overall length A Screw TC178TM designed for clamping end mills, providing compact fixation in toolholders and cutters for CNC and manual milling applications. M5 thread for reliable clamping 16 mm overall length for compact fit 7.8 mm head diameter for secure seating Fits 3 mm Allen key for standard assembly Stable clamping for consistent machining The primary benefit of this clamping screw is repeatable tool retention through its M5 thread and compact dimensions. The combination of M5 thread and the specified head diameter yields secure axial fixation, which reduces micro-movement under cutting forces and helps preserve tool concentricity. For workshops that value process stability, this results in fewer rejects and more consistent surface finish on machined parts. The design suits end mill holders where space is limited and precision is required. Fast setup with standard workshop tools Installation and removal are straightforward thanks to the compatibility with a 3 mm Allen key, cutting setup time and simplifying maintenance tasks. The modest 16 mm overall length and nominal head diameter make the screw easy to reach in confined toolholders, accelerating changeovers and reducing machine downtime. For production environments focused on efficiency, quick tool changes translate into higher machine utilisation and lower operating costs per component. Practical compatibility and reliable sourcing With a nominal head diameter of 7.8 mm and a listed mass of 0.1 kg per item, this component is sized for common end mill assemblies and small toolholders used across general milling operations. Classified under eClass 21189290, the fastener is documented for procurement and inventory systems. Sourcing via a dedicated distributor ensures consistent availability and traceability, providing workshops with the stock control and delivery reliability expected in professional settings. For reliable tool clamping and technical advice on suitability for specific holders, contact Metav Werkzeuge — Metav’s specialists in precision components are available from Emmerich and can provide procurement and application guidance by email or phone. Technical Data Article number: TC178TM Manufacturer: Teknik Makina Description: Screw for end mill ECLASS: 21189290 Facts Thread: M5 Overall length: 16 mm Head diameter: 7.8 mm Weight: 0.1 kg Special features Compatible with 3 mm Allen key Suitable for clamping end mills SKU: TC178TM FAQ What thread does the clamping screw use? The screw uses an M5 thread, as specified for the TC178TM from Teknik Makina. Which Allen key fits the screw? Assembly and removal of the TC178TM require a 3 mm Allen key, compatible with standard workshop tool sets. What is the overall length and head diameter? Overall length is 16 mm and the head diameter is 7.8 mm, matching compact toolholder requirements. Can this screw be used for common end mill holders? Yes, the TC178TM is specified for clamping end mills and is designed to fit typical compact holders where an M5 fastener is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com