22mm Screw for End Mill M6, 9.5mm Diameter - Teknik Makina

Q: Is this screw compatible with standard end mill holders?

The TC181TM screw is intended for holders that accept a metric M6 thread and a 9.5 mm clamping interface; verify the holder thread and bore before installation.

Seitlich liegende Schraube auf weißem Hintergrund. Für Radiusfräser.

Picture similar to product

€6.15

Accessory Items

3mm Allen Key Hex L-Shaped, Chrome-Plated - Teknik Makina

€8.39

Product number: TC181TM

Product information "22mm Screw for End Mill M6, 9.5mm Diameter - Teknik Makina"

The combination of a metric M6 thread, a compact 9.5 mm diameter and a 22 mm total length ensures secure clamping with minimal axial play; ideal for high-repeatability milling setups. Order the screw directly via Metav Werkzeuge or consult our team for application-specific guidance.

Screw for End Mill TC181TM — M6 thread, 9.5 mm diameter (Teknik Makina)

The Screw for End Mill TC181TM is a retention fastener designed to secure end mill shanks in milling holders and adaptors, providing stable clamping for precision cuts.

M6 standard thread for secure clamping
Diameter 9.5 mm for tight fit
Total length 22 mm for compact assemblies
Hex key 3 mm compatible with Allen wrench

Secure clamping that improves tool stability and repeatability

A compact retention screw such as this is a straightforward way to reduce axial and radial movement in the toolholder. With a metric M6 thread and a 9.5 mm diameter, the fastener creates consistent contact pressure across the clamping interface, which reduces runout and enhances concentricity during milling. The result is fewer rework cycles and more predictable tool life, translating directly into improved process efficiency for production and repair workshops.

Quick serviceability for reduced downtime

Maintenance cycles benefit from a simple design that is compatible with a 3 mm Allen key, enabling fast replacement or retightening at the bench or on the machine. The 22 mm total length keeps the assembly compact while allowing enough engagement for reliable fixation, so changeovers are completed swiftly without special tooling. This eases everyday workshop routines and supports higher machine availability — a practical advantage for busy job shops and production lines.

Designed for integration with standard holders and workshop logistics

Manufactured to fit conventional end mill shank arrangements, the component follows familiar metric conventions making it straightforward to match with existing holders and adaptors. The screw’s lightweight nature and standard geometry simplify inventory management and spare-part planning. Combined with Metav Werkzeuge’s sourcing and quality-filtering from Emmerich, procurement becomes more dependable, helping to centralise supplies and support a smoother workflow across industry, craft and trade operations.

For tailored advice on matching this Teknik Makina retention screw to specific holders or to secure appropriate spares, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

Article number: TC181TM
Name: Screw for End Mill
Manufacturer: Teknik Makina
Weight: 0.1 kg

Facts

Diameter: 9.5 mm
Thread: M6
Total length: 22 mm
Weight: 0.1 kg

Special features

Compatible with 3 mm Allen key
Suited for end mill shanks
Metric M6 thread standard

FAQ

Is this screw compatible with standard end mill holders?
The TC181TM screw is intended for use with holders that accept a metric M6 thread and a 9.5 mm clamping interface; verification of the holder thread and bore is recommended before installation.

Which tool is required to tighten the fastener?
A 3 mm Allen key (hex key) is specified for the retention screw, allowing straightforward tightening and removal at the machine or workshop bench.

How often should the screw be inspected or replaced?
Inspect the screw periodically for thread wear, deformation or corrosion; replacement is advised when secure clamping can no longer be achieved to maintain the integrity of the clamping system.

What is the SKU and who manufactures this component?
The SKU is TC181TM; the part is supplied by Teknik Makina and intended as a retention screw for end mill assemblies.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Properties "22mm Screw for End Mill M6, 9.5mm Diameter - Teknik Makina"

Designation:	Schraube
Diameter-1:	9,5mm

Accessory Items

3mm Allen Key Hex L-Shaped, Chrome-Plated - Teknik Makina

Compact, reliable and ready for routine assembly work: the compact design and the professional hex profile ensure efficient fastening with minimal tool weight, while procurement and support are available through Metav Werkzeuge for straightforward workshop supply. Allen key — compact metric hex key by Teknik Makina (SKU 3ALLENTM) A compact Allen key engineered for routine assembly and maintenance tasks in professional workshops and service environments Compact, lightweight design 0.1 kg Metric hex profile for standard fittings Manufactured by Teknik Makina Faster, neater fastening for everyday workshop tasks The compact design and the defined hex key geometry make this tool a practical choice for recurring fastening work in production, maintenance and assembly. The short profile reduces wobble and improves access in confined spaces, while the low mass contributes to reduced hand fatigue during repetitive tasks. The balanced combination of compact form and sturdy hex engagement supports reliable alignment and smoother operation, delivering measurable efficiency gains in small- to medium-scale workflows. Secure contact and repeatable engagement for fewer slips A correctly formed hexagon profile distributes torque across flat contact faces rather than corners, which reduces the risk of rounding fastener heads and improves repeatability when applying torque. This geometry explanation is useful for non-specialists: the wrench bears on six flats of the screw head, increasing contact area and lowering stress concentrations. For routine maintenance and light production work, that means fewer damaged fasteners and less rework — a direct saving in time and materials. Easy storage and quick portability for mobile technicians Weighing only 0.1 kg, the tool is tailored for technicians who value mobility without compromising on basic performance. The lightweight nature and compact footprint allow efficient tool organisation, keeping essential hex keys at hand in tool pouches or wall racks. For mobile service engineers and shop-floor technicians, this portability translates into faster job turnaround and a tidier toolbox, supporting a more organised workflow and less time spent searching for the right implement. Consistent supply and professional sourcing through Metav Sourcing this Teknik Makina item via Metav ensures access to a broad industrial portfolio and the benefits of a European distribution hub. Metav stands for democratisation of precision, combining decades of expertise with an expansive catalogue to reduce supplier complexity. With a long-standing customer base and transparent order handling from Emmerich, the partnership reinforces reliable supply for workshops and trade specialists seeking consistent quality and stock availability. For procurement and technical guidance on this Teknik Makina Allen key (SKU 3ALLENTM), rely on Metav Werkzeuge for targeted advice and dependable delivery from Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for concise support. Technical data Article number: 3ALLENTM Name: Allen key Manufacturer: Teknik Makina Facts Weight: 0.1 kg eCl@ss: 21189290 Special features inbussschlussel: 3 Allen SKU: 3ALLENTM FAQ What does the product include? The product is listed as an Allen key set described by the field "3 Allen", indicating a package composition noted in the technical details for the Teknik Makina item (SKU 3ALLENTM). Is this suitable for professional workshop use? Yes, the hex profile and compact design make the item appropriate for routine professional assembly and maintenance tasks in workshop environments. How much does the tool weigh? The documented weight for the item is 0.1 kg, making it lightweight and easy to carry within a tool kit. Why is hex geometry important for fastening? Hex geometry increases contact area on the fastener flats, lowering stress on corners and helping to prevent rounding; this contributes to more reliable torque transfer and less rework. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

€8.39