Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
Ethernet Interface Module KDP-A02 For KDP Scales, Non-Retrofit - KERN
Take advantage of fast Ethernet connectivity and factory-integrated design to streamline weighing data flows while maintaining compatibility with KERN KDP systems; order the module directly via Metav Werkzeuge or consult our specialists for integration advice. Ethernet Data Interface KDP-A02 – Ethernet interface module for KERN KDP scales The Ethernet Data Interface KDP-A02 connects KERN KDP weighing systems to local networks, enabling rapid and reliable transfer of measurement data to IT systems and production networks Ethernet connectivity for fast data transfer OEM-fit for KDP scale series Factory-integrated; not retrofittable Reduce manual logging and speed up production with networked data transfer The interface module provides Ethernet connectivity so measurement results move from the weighing device to central systems without manual transcription, lowering error rates and accelerating workflows. By enabling direct data transfer over a wired network, the module supports automated logging and reduces administrative tasks. For operations that require traceability and rapid throughput, this networked approach delivers measurable gains in efficiency and process reliability. Assured compatibility and robust factory integration Designed as an OEM-fit for the KDP series, the unit is factory-integrated rather than an aftermarket add‑on; this ensures tested electrical and mechanical compatibility with the original weighing hardware. The non-retrofit nature of the module means the interface is optimised for the device architecture, contributing to stable operation and predictable maintenance intervals. For installations where system integrity matters, a factory-installed network interface reduces integration risk and supports long-term uptime. Practical deployment: where it fits and what to expect The module is intended for use with KDP weighing systems in industrial and workshop environments that need centralised data capture. Technical staff will appreciate the straightforward network function: it supplies a continuous, wired connection for measurement export suitable for quality assurance, inventory control or production logging. For questions about integration into existing IT landscapes or PLC systems, Metav’s technical consultants can advise on network requirements and deployment options. Contact Metav Werkzeuge for advice on integrating the KERN Ethernet solution and to confirm system compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KDP-A02 Manufacturer: KERN Designation: Ethernet data interface for KDP Numbers / Core technical data GTIN: 4045761251458 ECLASS: 19050111 HS code: 84239010 Special features / Versions Segment: Accessories; product group: Interface modules Not retrofittable; factory-integrated Country of origin: CN FAQ Is this module compatible with existing KDP scales? The KDP-A02 is designed specifically for the KERN KDP series and provides direct Ethernet connectivity when integrated as intended. Can the Ethernet interface be retrofitted to older devices? No, the module is factory-integrated and marked as not retrofittable; it is intended for models prepared for this interface. What identifiers should be used when ordering or checking compatibility? Use the SKU KDP-A02 and the GTIN 4045761251458 when verifying compatibility or placing an order for the KERN Ethernet data interface. Where is the interface manufactured? The KERN Ethernet Data Interface KDP-A02 is listed with country of origin CN. What benefits does network integration offer for weighing data? Networked connectivity reduces manual logging, increases throughput and improves traceability by sending measurement data directly to central systems. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
Ethernet Interface Module, Non-Retrofit, RJ45 Data Port - KERN
Take advantage of reliable digital output and compact installation to secure consistent data transfer from your weighing equipment; the Ethernet connection and factory-fit design ensure straightforward network integration and low installation footprint — order via Metav Werkzeuge or consult our technical advisers for compatibility checks. KIB-A02 Ethernet data interface by KERN — Ethernet connectivity, compact design The KIB-A02 is an Ethernet data interface for precision scales, designed to provide stable digital transmission for laboratory and industrial weighing systems. Ethernet interface for precision scales Compact design, only 40 g weight Factory-fit device, not retrofittable Manufacturer KERN, SKU KIB-A02 Consistent digital output for precise process control The KIB-A02 provides a direct Ethernet link between weighing instruments and process networks, reducing manual data entry and the associated error risk. By delivering a continuous digital stream, the interface supports higher process efficiency and traceability; the emphasis on data integrity and deterministic transfer helps maintain measurement records without additional conversion hardware. Integration into existing IT landscapes is simplified by using standard network protocols, making the device suitable for both production lines and laboratory data acquisition systems. Small footprint and installation benefits that save space With a lightweight construction of 0.04 kg (40 g) and a compact form factor, the interface minimises its spatial impact within the weighing setup. The unit is supplied as a factory-fit accessory and is not retrofittable, which preserves calibration status and mechanical integrity when installed. These characteristics reduce installation time and the need for auxiliary mounting hardware, supporting faster commissioning and a cleaner system layout while keeping mechanical influence on the weighing device to a minimum. Supply reliability and practical support for industrial use Sourcing through Metav Werkzeuge ensures access to a broad portfolio of metrology and workshop products together with dependable logistics from Emmerich on the Rhine. The distribution model focuses on consistent availability and a centralised supply chain, which is particularly valuable for facilities managing multiple measurement points. If technical clarification or compatibility verification is required, Metav’s consultants can advise on suitable configurations and network integration to align with existing scale models and IT requirements. Contact Metav Werkzeuge for compatibility advice and to procure the KIB‑A02 Ethernet data interface directly from our Emmerich warehouse Technical data Article number: KIB-A02 Manufacturer: KERN GTIN: 4045761207028 Country of origin: China Weight: 0.04 kg Harmonised tariff code: 84239010 ECLASS: 19050111 Core figures Weight: 0.04 kg GTIN: 4045761207028 Harmonised tariff code: 84239010 ECLASS: 19050111 Special features Ethernet data interface for precision scales Factory-fit only, not retrofittable Accessory for scales (Zubehör) Manufacturer SKU KIB-A02 Origin: China FAQ Is the interface compatible with all KERN scales? Compatibility depends on the scale model and its communication options; the KIB-A02 Ethernet data interface is designed for use with KERN weighing equipment that supports a network connection, and Metav can advise on specific model compatibility. Can the device be retrofitted to existing scales? The device is supplied as a factory-fit accessory and is not retrofittable, so retrofitting to scales that were not prepared for it is not supported. What are the physical dimensions and weight of the interface? The interface has a compact footprint and a weight of 0.04 kg (40 g); exact mounting dimensions are available on request from the manufacturer or Metav. Which standards or protocols does the interface use? The unit provides standard Ethernet connectivity for digital data transfer; protocol specifics and integration details should be confirmed for the target system. KERN — Origin: China — GTIN: 4045761207028
Etikettenrolle
KERN Label spool Technical Data: and Summary:Manufacturer: KERNSeries: YKEModel: Label spoolLabel spool quick and easy order Online!!
External Power Adapter 35€ Net, For Scales, AC Mains Supply - KERN
Reliable mains supply and compact form factor ensure stable operation for precision weighing instruments; the lightweight 0.22 kg construction supports simple handling and discreet installation. Order the adapter directly via Metav Werkzeuge or consult our specialists for compatibility and delivery information. External power adapter FOB-A01 — Compact mains supply for KERN scales The External power adapter FOB-A01 is a compact mains supply designed for precision weighing equipment and scale accessories, providing a dedicated power source for laboratory and workshop scales. Compact external mains adapter Lightweight at 0.22 kg Made for KERN weighing systems Stable power for consistent measurement results A steady mains supply is essential for precision scales and weighing instruments because voltage fluctuations can affect display stability and reading repeatability. The external mains adapter provides a dedicated source of power that reduces the load on internal circuitry, supporting more consistent measurement output. Where bench-top accuracy matters, a reliable external supply contributes to process conformity and fewer interrupted measurement cycles. The KERN design focus ensures a practical balance between electrical performance and workshop usability. Space-saving design that suits busy workbenches The adapter’s compact dimensions and lightweight 0.22 kg housing allow the power unit to be positioned unobtrusively beside or behind a scale, freeing valuable bench space for workpieces and tools. This physical economy is particularly beneficial in laboratories and small-scale production areas where footprint reduction improves workflow. A separate power unit also simplifies replacement and maintenance compared with integrated supplies, reducing downtime and enabling faster service routines for weighing equipment. Practical reliability for industrial and craft environments For accessories classified under scale equipment, a dependable external adapter supports long-term operational reliability and helps maintain instrument longevity. The adapter’s classification for weighing accessories and its construction by KERN reflect a focus on compatibility with common workshop environments. Using a dedicated external supply can limit thermal stress inside sensitive instruments and make calibration stability easier to maintain, which is advantageous for quality assurance and repeatable processes. For dependable operation with KERN weighing systems, order the external power adapter via Metav Werkzeuge — contact our technical consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored compatibility advice Technical data SKU: FOB-A01 Manufacturer: KERN Country of origin: China Customs tariff number: 85044090 ECLASS: 21059206 Facts Weight: 0.22 kg Tariff number: 85044090 ECLASS: 21059206 Special features External mains adapter for weighing equipment Category: Accessories for scales Manufacturer: KERN Origin: China FAQ Is this adapter compatible with all KERN scales? The FOB-A01 is intended for KERN weighing systems; compatibility depends on the scale’s power-input specification and connector type, so cross-check the instrument’s voltage and plug requirements. What advantages does an external mains adapter offer compared with internal supplies? An external adapter keeps heat and electrical components outside the instrument, simplifying replacement and helping to maintain calibration stability for precise weighing tasks. What is the weight of the KERN external power adapter FOB-A01? The KERN adapter FOB-A01 has a net weight of 0.22 kg. Where is the adapter manufactured? The FOB-A01 is manufactured in China and supplied under the KERN brand for scale accessories. KERN, China
Fixing Footplate Pair For Weighing Beam Mounting - KERN
Take advantage of reliable floor anchoring and compact design to improve weighing stability; the pair of foot plates provides secure fixation for a weighing bridge while keeping installation quick and unobtrusive. Order through Metav Werkzeuge or consult our advisors for application advice and fast supply. BIC-A07 Foot Plate Pair – Floor fixing for weighing bridge by KERN The BIC-A07 is a pair of foot plates designed to secure a weighing bridge to the floor, intended for use in industrial metrology and workshop scale installations. Secure floor anchoring for weighing bridge Durable pair for industrial scale installations Rapid, straightforward installation on-site Compact design with low weight 0.75 kg Stabilise measurements with dedicated floor anchoring A weighing bridge needs a steady foundation to deliver consistent results; the BIC-A07 foot plates provide exactly that. By securing the load cell structure to the floor, these mounting plates reduce lateral movement and vibration that can cause measurement drift. The direct consequence is improved repeatability of readings and fewer recalibrations, which translates into measurable time savings during routine quality checks. The design focuses on reliable fixation rather than decorative elements, so the practical benefit is clear: better measurement stability for industrial scales and test benches. Save assembly time with a compact, practical mounting solution Installation routines are often a bottleneck in workshop set-ups. The foot plates have been conceived for quick integration with existing weighbridge frames, enabling technicians to achieve firm anchorage without extended on-site modification. The compact footprint and low mass (0.75 kg) make handling and positioning straightforward during installation phases. For operations that require short downtimes and predictable set-up times, this results in lower labour overheads and fewer interruptions to production workflows. The simple mechanical function—anchoring the weighing bridge to the floor—means less specialist tooling is required and commissioning is faster. Choose KERN components through a dependable partner Selecting accessories from a recognised manufacturer brings compatibility and traceability. These foot plates are supplied under the KERN brand and are categorised within scale accessories, which simplifies inventory and spare-part management for calibration labs and maintenance teams. Procuring the plates via Metav Werkzeuge connects that brand reliability with a broad supply chain: Metav’s Emmerich hub acts as a quality filter for the European market, supporting consistent availability and transparent fulfilment. For procurement managers seeking to consolidate suppliers while maintaining metrology-grade performance, this combination supports a robust supply strategy. Request a suitability check or a tailored quote for the KERN BIC-A07 from Metav Werkzeuge – contact: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 — our consultants will advise on compatibility and delivery Technical data Article number: BIC-A07 Manufacturer: KERN SKU: BIC-A07 GTIN: 4045761193291 Country of origin: CN Tariff number: 84239010 Facts Weight: 0.75 kg ECLASS: 21130190 Special features Pair of foot plates for floor fixation of a weighing bridge Category: scale accessories (Waagen Zubehör) Intended use: secure anchoring of weighing bridge assemblies FAQ What is the primary purpose of these foot plates? The foot plates are intended to fix a weighing bridge to the floor, providing stable floor anchoring and improved measurement repeatability for scale installations. Are these plates compatible with different weighing bridges? Compatibility depends on the bridge frame design; the BIC-A07 is a standard accessory for scale assemblies and is typically suitable where floor fixation points match the plate mounting geometry. How much do the plates weigh? The pair has a combined weight reference of 0.75 kg, which supports easy handling during installation. Who manufactures the foot plates and where are they produced? These foot plates are manufactured by KERN and are listed with origin country CN and GTIN 4045761193291. Can these plates improve weighing accuracy? By reducing movement and vibration of the weighing bridge, the plates contribute to greater stability and can lower the frequency of recalibration, improving operational reliability. Manufacturer: KERN · Country of origin: CN · GTIN: 4045761193291
FKB-A01 Ethernet Interface for FKB.6K0.02 Non-Upgradable - KERN
Take advantage of networked data transfer and factory-fitted reliability for consistent weighing workflows; the unit provides seamless integration with KERN weighing terminals and is dispatched quickly from our European logistics network. Order the module directly via Metav Werkzeuge or consult our technical advisors if further information is required. Ethernet interface FKB-A01 – Network interface for FKB.6K0.02 (KERN) The Ethernet interface FKB-A01 is a dedicated network module that provides wired data output for KERN FKB.6K0.02 weighing equipment, designed for integration in industrial weighing setups. Factory-fitted Ethernet module Compatible with FKB.6K0.02 scales Not retrofittable Rapid dispatch from Emmerich warehouse Streamlined data flow for professional weighing systems The fitted Ethernet module creates a direct, wired link between the weighing terminal and existing network infrastructure, enabling reliable data transfer to logging systems or process controllers. This reduces manual data capture and the associated transcription errors, which supports faster throughput in production and quality-control environments. The connection is intended for fixed installation on the specified terminal, ensuring consistent performance in continuous-use applications. Predictable integration and operational benefits Designed specifically for the KERN terminal family, the module guarantees compatibility with the FKB.6K0.02 series, avoiding the variability that comes with generic adapters. The factory-fit approach means installation is completed prior to delivery, providing a predictable integration path and eliminating on-site retrofitting requirements. For facilities that require deterministic data handling and traceable weighing records, the interface simplifies network integration without introducing variant hardware. Practical purchasing and logistics for workshops and industry Availability is supported by rapid dispatch from Metav Werkzeuge’s logistics operation, reducing lead times for workshops and production sites needing prompt integration. The module’s designation and manufacturer information allow for clear procurement and inventory management; documentation supplied at delivery supports configuration in an industrial network environment. Where networked weighing supports traceability and process automation, this module serves as a stable building block for dependable data capture. For reliable networked weighing with KERN, request the Ethernet interface FKB-A01 from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 to confirm fitment and delivery options. Technical data Article number: FKB SKU: FKB-A01 Manufacturer: KERN Designation: Ethernet interface for FKB.6K0.02 Facts ECLASS: 19050111 Customs tariff number: 84239010 Weight (kg): 0 Origin: CN Special features not retrofittable suitable for FKB.6K0.02 rapid dispatch Category: Waagen Zubehör FAQ Is the Ethernet module compatible with other KERN models? The Ethernet interface FKB-A01 is configured for the FKB.6K0.02 series; compatibility with other KERN models is not guaranteed and should be verified against the terminal’s specifications. Can the interface be installed later on an existing terminal? The unit is marked as not retrofittable; the Ethernet module is intended for factory installation on the specified terminal and cannot be retrofitted on-site. What documentation is provided with the module? Delivery includes designation and manufacturer details to support configuration; for further technical specifications, Metav Werkzeuge can provide supplementary data sheets. KERN (origin: CN)
FOB-A09 4045761139367 External Power Adapter For FOB-S - KERN
Reliable, compact and made for workshop use: the combination of dependable power delivery, compact design and genuine KERN quality ensures uninterrupted operation of FOB-S weighing systems. Order the FOB-A09 external power adapter directly via Metav Werkzeuge or ask our consultants if needed. FOB-A09 External Power Adapter for FOB-S — KERN, Compact and Lightweight An external FOB-A09 power adapter designed to supply the FOB-S weighing indicator, suitable for workshop and industrial scale installations. Compact external adapter for FOB-S systems Lightweight design, only 0.24 kg Genuine KERN accessory, GTIN 4045761139367 Continuous, dependable power for precision weighing The FOB-A09 serves as a compact external power adapter that provides reliable power to FOB-S weighing indicators, reducing interruptions in measurement workflows. By focusing on stable supply characteristics rather than decorative extras, the adapter supports consistent readouts and prevents unexpected shutdowns. This reliability translates into fewer process interruptions and higher operational uptime in routine weighing tasks. Space-saving installation for busy workshop environments With a lightweight construction of 0.24 kg and a compact footprint, the adapter is engineered for unobtrusive placement beside the scale or mounted near the weighing station. The small size minimises cable runs and frees bench space, which benefits crowded workbenches and mobile setups. The practical design supports tidy installations and eases routine handling during equipment changes or maintenance. Clear identification and original-equipment provenance As an original-equipment accessory from KERN, the adapter carries clear identifiers—SKU FOB-A09 and GTIN 4045761139367—for straightforward inventory management and traceability. These product identifiers assist purchasing and quality-control processes, making stock checks, replacements and audits simpler while maintaining alignment with original manufacturer specifications. Contact Metav Werkzeuge in Emmerich for expert advice on the KERN FOB-A09 external power adapter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: FOB-A09 Manufacturer: KERN Product type: External power adapter for FOB-S Data Weight: 0.24 kg GTIN: 4045761139367 Harmonised System: 85044090 eClass: 21059206 Special features Designed for FOB-S weighing indicators Origin: CN Category: Scales › Accessories FAQ Is the adapter compatible with FOB-S weighing indicators? Yes. The FOB-A09 is designed specifically as an external power adapter for FOB-S weighing indicators and matches KERN's accessory specifications. Is this an original KERN accessory? Yes. The unit is supplied as a genuine KERN accessory and is identified by SKU FOB-A09 and GTIN 4045761139367. What is the weight of the adapter? The adapter weighs 0.24 kg, making it compact and easy to position in workshop environments. Where is the adapter manufactured? The adapter is manufactured in China. How can the adapter be identified on delivery? Identification is via SKU FOB-A09 and GTIN 4045761139367; packaging and label information should match these numbers. KERN; Address: not provided; Contact: not provided
for CB-Q1 Load Angle, Zinc-Plated Steel Accessory - KERN
Benefit from a durable, galvanised‑steel connection that ensures reliable compatibility with the CB‑Q1 weighing range while supporting efficient installation and reduced maintenance. Order the component directly via Metav Werkzeuge or consult our technical advisors for application guidance. Load corner CE.Q30907 for CB‑Q1 scales — galvanised steel, KERN The load corner CE.Q30907 is a robust mounting accessory for the CB‑Q1 series, designed to secure load cells and platforms in industrial weighing installations with dependable corrosion protection. Compatible with CB‑Q1 scales Galvanised steel construction Fast dispatch from Emmerich stock Secure mounting that improves weighing reliability A precise mechanical interface is essential for consistent measurement. The CE.Q30907 load corner, made of galvanised steel, provides a stable connection point for the CB‑Q1 family, reducing micro‑movement that can cause reading drift. Solid construction and exacting fit minimise the need for retightening and cut the frequency of service interruptions, translating into measurable uptime improvements for production and quality‑control processes. The result is a more reliable weighing chain from platform to indicator. Corrosion resistance that lowers maintenance effort Exposure to workplace humidity and cleaning agents accelerates wear on unprotected parts. The galvanised finish on this corner bracket offers long‑term resistance to corrosion, which preserves mechanical alignment and surface integrity. By maintaining the mounting geometry, the bracket helps safeguard calibration intervals and reduces the likelihood of component replacement. For workshops and production plants where continuity matters, this equates to predictable maintenance schedules and lower total cost of ownership. Straightforward integration into existing scale assemblies Designed specifically for the CB‑Q1 range by KERN, the component fits into standard mounting schemes used in industrial weighing. Compatibility-focused design simplifies retrofitting and reduces assembly time on the production floor. Clear part referencing and a standard form factor ensure that technicians can identify and install the item without complex adjustments. Where rapid turnaround is required, the availability from local stock in Emmerich shortens lead times and supports continuous operation. Dependable supply chain and technical partnership Choosing a component with transparent sourcing and local logistics supports operational planning. Metav Werkzeuge acts as a quality filter for the European market, combining storage in Emmerich with professional order processing so that workshop planners and buyers can rely on consistent supply. The CE.Q30907 is presented as part of a broad accessory range that enables centralised procurement and streamlined vendor management for industrial customers. Contact Metav Werkzeuge in Emmerich for expert advice on the KERN load corner CE.Q30907 — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and delivery details Technical Data Article number: CE.Q30907 Manufacturer: KERN eClass: 21131725 Material: Steel, galvanised Compatible with: CB‑Q1 Facts SKU: CE.Q30907 eClass ID: 21131725 Special features Accessory for weighing systems Galvanised surface treatment Designed for CB‑Q1 range FAQ What scale models is this accessory compatible with? The CE.Q30907 load corner is intended for use with the CB‑Q1 series and matches the mounting geometry specified for that range. What material and protection does the bracket provide? KERN supplies the bracket in galvanised steel, giving corrosion resistance suitable for industrial environments. Can this part help reduce service visits to the scales? By maintaining a stable mechanical interface, the load corner helps preserve alignment and can extend intervals between adjustment or maintenance operations for CB‑Q1 installations. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
for CB.750/1000/1500-3Q2 Bearing Stainless Steel - KERN
Take advantage of the combination of stainless steel construction and precise compatibility with KERN CB.750/1000/1500-3Q2, ensuring reliable support in industrial weighing applications. Order directly via Metav Werkzeuge or ask our consultants for tailored advice. Bearing for CB.750/1000/1500-3Q2 (CE.Q34906) – stainless steel accessory by KERN A Bearing for CB.750/1000/1500-3Q2 designed as a robust accessory for KERN CB-series scales, providing precise mechanical support in professional weighing setups *Stainless steel construction for longevity *Compatible with CB.750/1000/1500-3Q2 scales *Robust component; weight 3 kg Solid support for accurate weighing results The bearing delivers a stable mechanical interface that contributes to consistent measurement results when mounted on compatible weighing instruments. Made from stainless steel, the component reduces the risk of dimensional change under typical shop conditions and offers reliable resistance to corrosion. By providing a firm support point, the bearing minimises unwanted movement and mechanical play, which in turn helps maintain repeatable readings in production and inspection routines. Designed for seamless integration with KERN CB series Engineered specifically for the KERN CB.750/1000/1500-3Q2 models, this accessory ensures straightforward fitment and mechanical compatibility with the referenced platforms. The targeted design reduces installation complexity and supports quick replacement of worn parts, helping to shorten downtime. Compatibility is stated for the CB.750/1000/1500-3Q2 range, enabling predictable integration into existing weighing systems used in laboratories, workshops and on production lines. Durable material choice for industrial conditions Using stainless steel as the primary material combines strength with long-term durability where hygiene and resistance to environmental factors are relevant. The material choice supports easier cleaning and lower maintenance effort compared with softer alloys, and it resists surface degradation in typical industrial atmospheres. The component’s 3 kg mass contributes to its mechanical stability without requiring additional mounting accessories, making it suitable for demanding operational cycles. Logistics and supply reliability from Metav Available through Metav Werkzeuge with fast dispatch and access to an extensive inventory, the bearing benefits from a dependable supply chain and central European distribution. The product listing forms part of a large catalogue of workshop essentials, simplifying procurement and reducing the number of suppliers needed. Clear article identification and stock availability support efficient spare-part management for maintenance planners and procurement teams. Contact Metav Werkzeuge for specification support, availability updates or to arrange purchase through Emmerich for prompt dispatch to your workshop Technical Data Article number: CE.Q34906 Manufacturer: KERN Material: stainless steel ECLASS: 21130403 Facts Weight: 3 kg Category path: Waagen › Zubehör Special features Compatible with CB.750/1000/1500-3Q2 Accessory for scales Fast shipping available via Metav Werkzeuge Image asset available for identification FAQ Is this bearing compatible with KERN CB.750/1000/1500-3Q2 models? Yes. The bearing is specified for the CB.750/1000/1500-3Q2 range and is designed to fit those KERN platforms. What material is used for the bearing? The component is manufactured from stainless steel, providing corrosion resistance and low maintenance requirements. What is the article number or SKU for ordering? The product is listed under article number CE.Q34906 (SKU CE.Q34906) for clear identification during procurement. How heavy is the bearing and does that affect installation? The bearing has a weight of 3 kg; its mass contributes to mechanical stability and should be considered when planning handling and mounting. Can the bearing be used on other scale models? The bearing is intended for the KERN CB.750/1000/1500-3Q2 series. Compatibility with other models should be verified against the mechanical specifications of those platforms. KERN
for CR.2000-3PI Accessory Stainless Steel, 190g - KERN
Take advantage of the combination of stainless steel construction, compact form and secure compatibility with the CR.2000-3PI for reliable weighing performance; order directly via Metav Werkzeuge or consult the Metav team for specification support. CE.P244022 accessory for CR.2000-3PI — stainless steel, KERN The CE.P244022 is an accessory designed to complement the CR.2000-3PI weighing system, providing a corrosion-resistant, compact solution for industrial and workshop environments. Accessory for CR.2000-3PI weighing systems Made from stainless steel for corrosion resistance Compact design — weighs 0.19 kg Manufacturer: KERN, precise industrial fit Durable stainless steel for long service life and reduced maintenance Constructed from stainless steel, this accessory offers high corrosion resistance and a durable surface that tolerates routine workshop conditions. The robust material choice reduces the need for frequent replacements and maintenance interventions, supporting predictable lifecycle costs and uninterrupted operation. For production environments where exposure to moisture or cleaning agents is expected, the corrosion-resistant construction helps maintain consistent measurement performance and hygienic surfaces without complex upkeep. Compact form that eases integration into existing setups The compact, lightweight design — at 0.19 kg — enables straightforward retrofitting to existing weighing systems without significant changes to the installation layout. Its small footprint simplifies storage and transport within busy workshops and reduces strain during handling and assembly. Where space optimisation is a priority, the accessory’s form factor supports tight integration, ensuring the system remains accessible for routine checks while keeping the overall station tidy and efficient. Precision compatibility to maintain measurement integrity Designed as an accessory for the CR.2000-3PI and manufactured by KERN, the component is engineered to match industrial tolerances and preserve the accuracy of the host device. Reliable component fit reduces setup time and the risk of measurement deviation, which in turn supports consistent quality control and fewer production interruptions. Procurement through an established partner also ensures steady supply and documentation for traceability in regulated workflows. For secure supply and further technical details on this KERN stainless steel accessory for CR.2000-3PI, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and order fulfilment. Technical Data Article number: CE.P244022 Manufacturer: KERN GTIN: 4045761231320 Country of origin: CN SKU: CE.P244022 Facts Weight: 0.19 kg ECLASS: 21131725 Tariff code: 84239010 Category path: Scales > Accessories Special features Material: stainless steel Intended use: accessory for CR.2000-3PI weighing systems Manufacturer origin: China FAQ What is the CE.P244022 intended for? The CE.P244022 is an accessory made to complement the CR.2000-3PI weighing system and improve durability and integration in industrial weighing applications. Is the accessory corrosion resistant? Yes, the CE.P244022 is manufactured from stainless steel, which provides corrosion resistance suitable for workshop environments and routine cleaning. Will this fit a CR.2000-3PI from KERN? The accessory is specified for use with the CR.2000-3PI and is produced by KERN to match the device’s industrial tolerances. How heavy is the accessory and does it affect installation? The accessory weighs 0.19 kg, offering a compact form that simplifies handling and installation without major modifications to existing setups. Where is the CE.P244022 manufactured? The CE.P244022 is produced in China and supplied under the KERN brand. Manufacturer: KERN; Address: n/a; Contact: n/a
Fußplatten-Paar für BFB
KERN Pair of base plates für BFB, Overview and Technical Data:Manufacturer: KERNSeries: BFSModel: Pair of base platesOrder now Pair of base plates Online.
GAB-A04 Internal Battery Up to 90h Runtime, Pb Rechargeable - KERN
Take advantage of the combination of long runtime, rapid recharge and proven KERN compatibility to keep weighing operations uninterrupted. Order the power module directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN GAB-A04 internal battery pack — up to 90 h runtime, approx. 12 h recharge The GAB-A04 is an internal rechargeable battery pack for KERN weighing instruments, designed to deliver extended operation between charges and secure measurement availability in workshop and industrial settings. Internal rechargeable battery operation Up to 90 h runtime (without backlight) Full recharge in approx. 12 h Compatible with KERN scale series Fewer interruptions thanks to extended operation The internal power module provides a long runtime of up to 90 h without backlight, which means extended periods of unattended measurement and less need for mains connection. For production environments and mobile weighing tasks this reduces process interruptions and allows measuring equipment to remain operational during shift changes or temporary site relocations. The specification assumes operation with the display backlight switched off; enabling illumination will reduce the runtime accordingly. Fast recharge to keep workflows moving A complete recharge takes approximately 12 h, allowing predictable scheduling of maintenance windows and ensuring the instrument is ready for the next workday. The charging characteristic supports efficient turnaround between uses, and the unit’s modest mass of 0.74 kg makes replacement and handling straightforward for workshop staff. These attributes contribute directly to higher equipment availability and lower indirect labour costs associated with battery management. Designed for seamless integration with KERN instruments This battery pack is intended as an internal accessory for KERN weighing devices and is supplied as a purpose-built power solution rather than a third-party retrofit. The design focuses on plug-and-play compatibility with the relevant scale range, simplifying installation and avoiding complex conversions. As a dedicated power module it maintains the instrument’s original operation modes and preserves calibration routines, supporting consistent measurement results in daily use. Reliability backed by a trusted distributor network Sourcing the power module through an established partner ensures dependable supply and after-sales continuity. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a wide product range to simplify procurement. The combination of component reliability and a dependable logistics partner reduces the risk of downtime and supports uninterrupted measurement capability in industrial and workshop environments. Contact Metav Werkzeuge in Emmerich to secure a KERN GAB-A04 for your scales or request further technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: GAB-A04 Manufacturer: KERN GTIN: 4045761126473 Country of origin: CN Facts Weight: 0.74 kg Recharge time: 12 h Battery runtime: up to 90 h (without backlight) Tariff number: 85072080 ECLASS: 21059207 Special features Internal battery operation for scales Lead (Pb) battery chemistry Accessory for weighing equipment Product group: batteries / accumulators Segment: scale accessories FAQ Is the battery compatible with all KERN scales? The battery pack is designed for integration with the relevant KERN weighing instrument series; compatibility should be checked against the instrument model and specifications. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions for the GAB-A04 internal pack. What runtime can be expected in daily use? The specified runtime is up to 90 h without display backlight; using the backlight or additional functions will reduce available operating time. What type of battery is used in this module? The unit uses a lead (Pb) accumulator chemistry, specified for internal operation in compatible KERN instruments. Is the runtime affected by instrument settings? Yes. Features such as display illumination and frequent data transmissions shorten the battery life compared with the quoted figure for non-illuminated operation. KERN · Origin: CN · GTIN: 4045761126473
Grubenrahmen für BFN
KERN Pit frame für BFN, Overview and Technical Data:Manufacturer: KERNSeries: BFNModel: Pit frameMaterial: EdelstahlOrder your new Pit frame now Online!
Grundplatte für CB-Q1 und CB-Q2
Technical Data:Manufacturer: KERNModel: Base plateBase plate quick and easy order Online!!
Haken mit Sicherheitsverschluss für HFD
Overview and Technical Data for KERN Hook :Manufacturer: KERNSeries: HFDModel: HookMaterial: Stahlguss verzinkt und lackiertOrder now Hook Online.
Haken mit Sicherheitsverschluss für Kranwaage
KERN Hook Technical Data: and additional information:Manufacturer: KERNSeries: YHAModel: HookMaterial: Stahlguss verzinkt und lackiertOrder now Hook Online.
HFD-A01 Hook 1.6kg Zinc‑Plated Cast Steel With Safety Latch For HFD Crane Scales - KERN
Take advantage of a secure safety latch, zinc-plated cast-steel construction and a non-rotating design for reliable load attachment in workshop and industrial weighing tasks; order the hook directly via Metav Werkzeuge or consult our specialists for application guidance. Hook with safety latch for HFD — KERN accessory, zinc-plated cast steel, non-rotating The Hook with safety latch for HFD is a replacement lifting hook for KERN crane scales, engineered to provide safe and stable load attachment in workshop and industrial weighing applications. Zinc-plated, painted cast steel construction Integrated safety latch for secure load holding Non-rotating design for stable attachment Compatible with KERN HFD 600K-1 and HFD 1T-4 Reliability where precision matters The lifting attachment is manufactured from zinc-plated and painted cast steel, a choice that prioritises dimensional stability and resistance to surface corrosion in everyday workshop conditions. The material combination ensures consistent mechanical behaviour during repetitive weighing cycles, which supports precise readings from the connected crane scale. This results in fewer interruptions and a more predictable workflow when the weighing operation is part of production control or logistics. Safe handling with a proven latch mechanism An integrated safety latch reduces the risk of load detachment during handling. The latch is designed to lock reliably under tension yet allow straightforward release when the load is secured on the scale hook, improving operational safety without complicating routine procedures. The non-rotating configuration keeps the load aligned with the scale axis, preventing torque-induced shifts that can affect measurement stability. Robust design for workshop longevity Constructed for frequent use, the attachment combines a sturdy cast-steel body with a protective painted finish to limit surface wear. At approximately 1.6 kg, the unit balances strength with manageable handling during installation or replacement. The design minimises moving parts, thereby reducing maintenance needs and supporting uninterrupted use in industrial environments where downtime impacts throughput. For dependable lifting performance with KERN quality, contact Metav Werkzeuge for availability and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HFD-A01 Manufacturer: KERN Material: Zinc-plated and painted cast steel Weight: 1.6 kg Facts Weight: 1.6 kg eCl@ss: 23120201 Special features Non-rotating hook design Integrated safety latch Compatible with KERN HFD 600K-1 and HFD 1T-4 Zinc-plated and painted finish FAQ Is this hook compatible with other KERN crane scales? The hook is specified as compatible with KERN HFD models HFD 600K-1 and HFD 1T-4; compatibility with other models should be verified against the scale's hook interface. How does the safety latch operate? The integrated safety latch on the hook locks under load to prevent accidental release, while allowing controlled disengagement when the load is secure. Can the hook rotate during use? This hook features a non-rotating design to keep the load aligned with the scale axis, enhancing measurement stability during weighing operations. What maintenance is required? Routine visual inspection for wear and corrosion on the zinc-plated finish is recommended; the simple design reduces routine maintenance compared with multi-part attachments. KERN — Distributor: Metav Werkzeuge, Emmerich am Rhein; info@metav-werkzeuge.com; +49 2822 7131930
HFD-A02 Hook 3T With Safety Latch, Zinc-Plated Cast Steel - KERN
Take advantage of the combination of a secure safety latch, galvanised and painted cast-steel construction and a non-rotating design for dependable lifting performance; order the hook directly via Metav Werkzeuge or consult our specialists for compatibility checks. HFD-A02 Hook with Safety Latch — Crane scale accessory by KERN, galvanised cast steel The HFD-A02 Hook with Safety Latch is a replacement crane hook designed for use with KERN HFD crane scales, providing a safety-locked, non-rotating connection for industrial lifting applications Safety latch prevents accidental release Galvanised, painted cast-steel construction Non-rotating design for stable lifts Compatible with KERN HFD crane scales Dependable construction for everyday industrial lifting The hook is manufactured from galvanised and painted cast steel, a material choice that combines mechanical strength with corrosion resistance to withstand workshop environments. This construction supports reliable load handling and helps protect the crane scale's measuring function by maintaining a stable connection during weighing. The robust build reduces the frequency of replacements and supports continuous production processes through sustained performance. Safer handling through a positive-locking latch A safety latch is integrated to prevent unintentional detachment during lifting and transport, which reduces the risk of dropped loads and the associated operational interruptions. The latch mechanism is designed for secure engagement without adding operational complexity, allowing quick visual checks before each lift. In practical terms, this means fewer stoppages for safety concerns and a lower chance of accidental load release in busy workshop environments. Stable alignment with a non-rotating design The hook's non-rotating configuration ensures the load remains aligned with the crane scale, reducing torsional stress on rigging and improving the repeatability of measurements. Stable positioning helps to avoid side loads that can compromise accuracy or cause uneven wear on hook components. For workflows that combine weighing and handling, such stability contributes directly to predictable cycle times and fewer adjustments on the shop floor. Simple compatibility and straightforward upkeep Designed as an accessory for the KERN HFD series (notably the HFD 3T-3 model), the hook fits as a direct replacement part to restore or upgrade a crane scale's lifting interface. Routine maintenance is limited to visual inspections, lubrication of the latch pivot if required and protection from prolonged exposure to abrasive or corrosive agents. The modest mass of the component supports straightforward handling during replacement or service interventions. Contact Metav Werkzeuge in Emmerich for compatibility confirmation and fast supply of KERN parts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HFD-A02 Manufacturer: KERN Material: Galvanised and painted cast steel SKU: HFD-A02 GTIN: 4045761206755 Facts Weight: 2.14 kg Origin: CN Tariff number: 84239010 Special features Safety latch included Non-rotating design Compatible with KERN HFD (model HFD 3T-3) Finish: galvanised and painted FAQ What machines is this hook compatible with? The HFD-A02 hook is compatible with KERN HFD crane scales, specifically noted for fit with the HFD 3T-3 model. Does the hook include a safety mechanism? Yes, the HFD-A02 hook is supplied with a safety latch to prevent accidental release during lifting operations. Is the hook rotatable? No, the component is a non-rotating hook, designed to maintain stable load alignment and consistent weighing results. What material is the hook made from and how should it be maintained? The hook is made from galvanised and painted cast steel; routine care involves visual inspections, light lubrication of moving parts and protection from corrosive conditions. Can the hook be used in harsh workshop environments? The galvanised and painted finish provides corrosion resistance suitable for many workshop conditions, supporting long-term reliability when routine checks are observed. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271
HFD-A07 External Battery Charger Fast Charging, Includes Removable Battery & Power Adapter - KERN
Take advantage of uninterrupted weighing operations through external battery charging and the included exchange battery and power adapter; combine compact handling with dependable compatibility for workshop scales. Order the charger directly via Metav Werkzeuge or ask our consultants if needed. HFD-A07 KERN charging station for Li‑ion batteries — external charger for scales HFD-A07 is a charging station designed for external charging of Li‑ion batteries used with workshop and industrial scales, providing a practical accessory solution for continuous operation. For external Li‑ion battery charging Includes exchange battery and power adapter Compact and lightweight at 0.19 kg Accessory for industrial and workshop scales Reduce downtime with dedicated external charging The HFD‑A07 charging station is engineered to support uninterrupted weighing processes by enabling batteries to be charged outside the instrument. By providing an exchange battery and power adapter, the station allows a charged spare to be available while the in-use battery is recharged, which reduces operational interruptions and improves workflow efficiency. Compatibility with Li‑ion chemistry ensures modern battery standards are met, so replacements and handling follow familiar industry practice. Compact design that fits busy workshops A compact, lightweight charging unit simplifies storage and handling in constrained work areas. At about 0.19 kg, the charger is easy to position on a bench or in a service trolley without occupying valuable space. The external charging approach frees the scale for continued measurement tasks while batteries are cycled separately, helping to maintain productivity during peak shifts and service periods. Practical accessory with reliable sourcing and support As an accessory for weighing equipment, this charger is classified for scale applications and delivered with essential extras to ensure immediate usability. Metav positions itself as a reliable partner: decades of expertise, a broad inventory and a central distribution hub in Emmerich support steady supply and quality control. This combination of practical design and dependable distribution underlines the unit’s role as a straightforward, workshop-ready accessory. Consult Metav Werkzeuge for tailored advice on KERN chargers and ensure immediate supply from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: HFD-A07 Manufacturer: KERN SKU: HFD-A07 GTIN: 4045761243941 Facts Weight: 0.19 kg Tariff number: 85076000 eClass: 27050604 Special features For external charging of Li‑ion batteries Accessory for scales Incl. exchange battery and power adapter Origin: CN FAQ What batteries are compatible with this charging station? The charging station supports Li‑ion batteries used with compatible scale models; consult the product specifications for battery type confirmation. Is the exchange battery included with the charger? Yes, the delivery scope lists an exchange battery and a power adapter as included accessories for the HFD‑A07 charging station. Can the charger be used in a compact workshop environment? The charger’s compact, lightweight design is intended for workshop and industrial bench use, facilitating placement without significant space consumption. Does this accessory fit standard workshop scales from KERN? The unit is supplied as a scale accessory and is intended for external battery charging of compatible KERN weighing equipment; verify model compatibility where required. KERN · Origin: CN · Contact: not provided
Hook for Underfloor Weighing Precision Scales, Hanging Load Accessory - KERN
Benefit from a hook designed specifically for underfloor hanging-load weighing, combining compatibility with KERN precision scales and reliable construction for repeatable measurements; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice and delivery options. Hook PLJ-A02 – Underfloor weighing hook for KERN precision scales The Hook PLJ-A02 is a dedicated lifting accessory for underfloor weighing applications, intended to secure suspended loads for precise measurements with KERN precision scales. For underfloor hanging-load weighing Compatible with KERN precision scales Robust German origin design Rapid dispatch available Accurate handling of suspended loads for repeatable results The accessory is engineered to support underfloor weighing tasks where suspended loads require secure attachment and stable positioning. By providing a defined mechanical interface for load suspension, the component reduces measurement variability and helps maintain traceable weighing results. The design focuses on repeatability rather than decorative aspects, so workshop workflows benefit from fewer re-checks and more predictable process times. The compatibility with established scale systems simplifies integration into existing measurement setups. Seamless integration into KERN scale systems for efficient workflows Compatibility with KERN precision scales ensures the hook works as part of a calibrated measurement chain, enabling straightforward installation and consistent data capture. Where scale interfaces are standardised, the accessory allows rapid attachment and removal of loads without lengthy reconfiguration. The mechanical coupling is intended to be robust and simple to use, which lowers downtime between measurements and supports higher throughput in production environments that rely on accurate weight data. Practical supply and traceability for professional workshops With German origin and clear identification via GTIN and SKU, the item supports professional procurement and inventory management. The accessory is documented for easier stock keeping and audit trails, aligning with workshop demands for traceable components. Rapid dispatch options from the supplier reduce lead times, helping to maintain continuous operation at the bench or on the shop floor. For buyers seeking reliable measurement accessories, the documented provenance and catalogue references simplify acceptance into standard tool lists. Contact Metav Werkzeuge in Emmerich to confirm compatibility with existing KERN scales and to arrange supply of the PLJ-A02 — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise ordering information and delivery from our Emmerich warehouse Technical data Article number: PLJ-A02 Manufacturer: KERN GTIN: 4045761106932 Origin: DE Facts Tariff number (HS): 90160090 eCl@ss: 27400890 Special features Accessory for underfloor weighing of suspended loads Suitable for use with KERN precision scales Category: Scales › Accessories FAQ What is the primary purpose of this hook? The PLJ-A02 hook is designed for securing suspended loads during underfloor weighing to enable repeatable and stable measurements with precision scales. Is the hook compatible with KERN scales? Yes, the accessory is specified for use with KERN precision scales, offering a direct mechanical interface suitable for standard weighing setups. What load capacity does the hook support? No maximum load is specified in the available product data for the PLJ-A02; the technical dataset does not include a rated capacity. How is the PLJ-A02 identified for procurement? The component is listed under SKU PLJ-A02 with GTIN 4045761106932 and tariff number 90160090 for ordering and inventory purposes. KERN · Origin: Germany · Seller: Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
Hook for Underfloor Weighing, For Hanging Loads, Precision Scales Accessory - KERN
Take advantage of a compact, retrofit-ready solution for underfloor weighing of suspended loads; the hook is compatible with KERN 440 precision scales and designed for straightforward integration. Order or request advice directly via Metav Werkzeuge for fast, expert guidance. Hook 440-A01 — Underfloor weighing accessory for KERN precision scales The 440-A01 hook is a dedicated accessory for underfloor weighing, created to support the safe suspension and accurate measurement of hanging loads on KERN precision scales. Retrofit-ready for quick installation Compatible with KERN 440 precision scales Designed for underfloor weighing of suspended loads Improved flexibility for existing weighing systems The retrofit capability of this accessory makes it simple to upgrade existing scales without replacing the base unit. When fitted to compatible equipment, the hook enables reliable underfloor weighing of hanging items while preserving the original calibration and setup of the base scale. For workshops and production lines that require occasional changes to weighing configuration, this accessory reduces downtime and avoids the need for multiple specialised scales by extending the functionality of one trusted system. Precise handling of suspended loads for consistent results Engineered for the application of suspended-load measurement, the hook supports stable load suspension and helps to maintain the precision expected from industrial weighing equipment. By providing a dedicated interface between the load and the scale, the accessory contributes to repeatable results and reduces variables that can compromise measurement integrity. The design is intended to work in concert with KERN’s measurement electronics to preserve accuracy during routine weighing operations. Compact design with low handling weight for efficient logistics With a nominal weight of 0.01 kg, the hook is intentionally compact for easy handling and storage. The small footprint simplifies retrofitting in confined spaces and streamlines inventory management where multiple accessories are used across a fleet of scales. Supplied as a manufacturer‑specified accessory and noted for straightforward compatibility, this component supports efficient workshop workflows and helps maintain precise measurement capabilities with minimal logistic overhead. For confirmation of compatibility with specific models or to arrange supply of the KERN 440‑A01 hook, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on integration and availability. Technical data Article number: 440-A01 SKU: 440-A01 Manufacturer: KERN GTIN: 4045761068933 Origin: CN Numbers / Core technical data Weight: 0.01 kg ECLASS: 27400890 Tariff number: 84239010 Special features / Designs For underfloor weighing of suspended loads Compatible with KERN 440 precision scales Retrofit-ready; series-compatible accessory PCB (product data note) FAQ Is the hook compatible with KERN 440 scales? The hook 440‑A01 is designed for compatibility with KERN 440 precision scales and intended for underfloor weighing of suspended loads. Can the accessory be retrofitted to existing equipment? Yes, the 440‑A01 hook is retrofit-ready and specified for straightforward integration with compatible KERN units. What is the weight of the accessory? The 440‑A01 hook has a nominal weight of 0.01 kg. Is the material composition specified? Material details are not specified in the provided product data; please contact Metav Werkzeuge for further technical information. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930
Internal Rechargeable Battery 12h Charge, 70h Runtime - KERN
Combine 70 h of continuous operation with a 12 h recharge cycle and a compact 0.2 kg form factor to ensure reliable, low-maintenance weighing when integrated with industrial load cells; order the HFD-A04 directly via Metav Werkzeuge or consult our specialists for compatibility advice. HFD-A04 Internal Battery for Load Cells — 70 h Runtime | KERN The HFD-A04 is an internal rechargeable battery designed for integration with load transmitters and industrial scales, delivering extended operation for unattended weighing applications. 70 h continuous operating time 12 h recharge cycle Compact 0.2 kg design For integration with load cells Reliable operation for uninterrupted weighing processes Built for industrial metrology, this internal battery provides up to 70 h of operation, enabling prolonged measurement runs without frequent intervention. The long runtime, combined with a 12 h charging interval, reduces the frequency of planned maintenance and supports shift-based production. Such predictable endurance translates into tangible efficiency gains on the shop floor: weighing systems remain available for longer periods, thereby improving throughput and reducing indirect labour costs. The energy supply is suitable for applications where consistent power to weighing electronics and transmitters is essential. Designed for seamless integration with load cells and transmitters The unit is intended for connection to load cells and weighing transmitters where an internal power source is required. By supplying stable voltage over extended cycles, the module helps maintain weighing precision even during intermittent mains interruptions. In practice, this means measurement stability is preserved and recalibration intervals are minimised. The technology behind the battery supports common industry requirements for compact power solutions in scales accessories, allowing straightforward integration into existing weighing assemblies while maintaining the original performance characteristics of the instrument. Compact, low-mass design for flexible installation Weighing just 0.2 kg, the battery is compact enough for confined instrument housings and does not significantly affect the balance or mounting of sensitive measuring equipment. The lightweight construction simplifies retrofits and new installations alike, and the rechargeable nature of the unit reduces consumable replacements. Handling and storage are uncomplicated thanks to the small footprint, and predictable charge and discharge behaviour makes planning for maintenance cycles straightforward. Where space is limited or weight influences installation, this module provides a practical, space-saving power option. For proven continuity in industrial weighing applications, request compatibility confirmation for KERN devices and secure the HFD-A04 via Metav Werkzeuge — Emmerich-based stock with expert advice available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: HFD-A04 Manufacturer: KERN eCl@ss: 21059207 SKU: HFD-A04 Facts Weight: 0.2 kg Battery operating time: 70 h Charge time: 12 h Special features Internal battery for load cells Category: Scales accessory Intended for integration with load transmitters FAQ Is the HFD-A04 compatible with all KERN load cells? Compatibility depends on the instrument model; the HFD-A04 is designed for integration with KERN load transmitters and compatible weighing electronics. How long does charging take and what is the expected runtime? The HFD-A04 requires approximately 12 h to charge and provides up to 70 h of operating time under normal conditions. Is the battery rechargeable and can it be replaced? The module is rechargeable; replaceability is determined by the host device design and KERN service guidelines for the specific instrument. What is the mass and will it affect the weighing assembly? The unit weighs 0.2 kg, a low mass that is unlikely to alter balance characteristics in typical scale housings. Which applications suit this battery module? The battery is suited to industrial and trade weighing applications where an internal, rechargeable power source for load cells or transmitters is required. Manufacturer: KERN — Contact via Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Ioniser Windshield Back Panel 150mm Neutralising Ioniser, Handheld/Stand Mountable - KERN
Take advantage of electrostatic neutralisation, flexible placement and seamless rear-panel integration to secure reliable milligram results and reduce reweighs. Order the unit directly via Metav Werkzeuge or contact our consultants for advice on fitting and compatibility. ABP-A01 — KERN windscreen back panel with integrated ioniser for precision balances The ABP-A01 is a windscreen back panel with an integrated ioniser that neutralises electrostatic charges during fine weighing, designed for laboratory and industrial balance applications. Neutralises electrostatic charge for precise weighing Integrated ioniser for compact rear-panel fitting Positionable with stand or handheld operation Reduces weighing errors in milligram range Achieve milligram accuracy by removing electrostatic influence Electrostatic charging on non-conductive samples creates a small electromagnetic field between the sample and the balance, which can distort results by grams or milligrams. The ABP-A01 uses a controlled ioniser function to neutralise that charge, stabilising the measurement environment and enabling precision weighing even with lightweight specimens. This direct reduction of measurement variability supports reproducible results and fewer repeat measurements, improving throughput and reducing material waste. Flexible placement that adapts to existing workflows The design allows the ioniser to be placed beside the balance using a stand or directed by hand for targeted neutralisation, giving operators flexibility during routine tasks. When ordered together with compatible models in the ABP series, professional rear-panel integration is offered to fit the unit cleanly into the balance enclosure, preserving the bench layout and minimising interference. The combination of portability and fixed integration supports a smooth workflow between bench tasks and analytical routines. Straightforward compatibility and simple function explanation Installation and operation are deliberately simple: the module neutralises charged particles near the weighing chamber so technicians need not alter weighing technique. Where rear-panel fitting is requested, the ABP-A01 is prepared for professional integration with ABP-series balances, ensuring correct alignment and electrical routing. The result is an unobtrusive addition to the setup that delivers consistent repeatability without complex adjustments. Designed for common non-conductive samples and routine use Materials such as plastic, porcelain and glass are particularly prone to electrostatic charging; the ABP-A01 is specified to address these cases and to support routine quality control and laboratory analysis. Built to be a compact and practical accessory, it complements balances used in analytical laboratories, quality departments and technical workshops where reliable low-mass measurement is essential. The accessory’s features focus on measurable benefits: fewer reweighs, clearer data and a more efficient weighing process. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN ABP-A01 into existing balances — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitting options and supply Technical data Article number: ABP-A01 Manufacturer: KERN GTIN: 4045761213975 SKU: ABP-A01 Weight: 0.85 kg Country of origin: PH Tariff code: 90160090 Category: Waagen > Zubehör eClass: 22330605 Core specifications Weight: 0.85 kg GTIN: 4045761213975 Tariff code: 90160090 eClass: 22330605 Special features Integrated ioniser for electrostatic neutralisation Suitable for non-conductive weighing goods (plastic, porcelain, glass) Placement: stand or handheld operation Option: rear-panel fitting with ABP series balances (service integration) Rapid dispatch from webshop FAQ How does the ioniser improve weighing accuracy? The ABP-A01 neutralises electrostatic charges that create fields between non-conductive samples and the balance, reducing measurement deviation and improving stability in the milligram range. Can the ioniser be fitted to existing ABP-series balances? Yes; when ordered in combination with an ABP-series model, the ABP-A01 can be professionally integrated into the rear panel to ensure a neat fit and correct alignment. Which sample types benefit most from the ioniser? Non-conductive materials such as plastic, porcelain and glass are most affected by static charge; the ABP-A01 is specified to reduce those effects and improve repeatability. Is the unit suitable for routine quality-control weighing? The ABP-A01 provides consistent neutralisation and supports repeatable weighing procedures, making it appropriate for routine QC and analytical tasks. Manufacturer: KERN — Address: Philippines — Contact: via Metav Werkzeuge, info@metav-werkzeuge.com, +49 2822 7131930
Ioniser YBI-01A 115x110x80 mm For Neutralising Electrostatic Charge Ozone 0.05 ppm/h - KERN
Benefit from electrostatic neutralisation and a compact, adjustable design for consistent, gram‑accurate results in precision weighing; the device’s low ozone output adds safety while keeping air quality within typical laboratory tolerances. Order the ioniser directly via Metav Werkzeuge or ask our consultants for application advice. KERN YBI-01A Ioniser — neutralises electrostatic charge, low ozone emission The KERN YBI-01A ioniser is a compact device for neutralising electrostatic charge on non-conductive weighing items beside precision balances and laboratory scales, enabling more reliable milligram‑level results. Neutralises static charge for precise weighing Low ozone emission 0.05 ppm/h Compact 115 x 110 x 80 mm footprint Adjustable feet or handheld targeting Achieve repeatable, gram‑accurate weighing through targeted electrostatic neutralisation Electrostatic charge on non-conductive materials such as plastic, porcelain or glass can create an electromagnetic field between the sample and the balance, leading to measurement errors that may reach the gram scale. The ioniser removes residual charge by producing a balanced stream of positive and negative ions, allowing the balance to register the true mass without drift or attraction. This results in fewer retests, reduced sample handling and higher process throughput — a clear efficiency gain for laboratories and quality control stations that demand reproducible micro‑ and milligram results. The effect is particularly noticeable when handling light or small parts where even slight electrostatic influence can distort the outcome. Flexible positioning for bench integration and targeted use Designed for easy placement, the unit fits beside most laboratory balances thanks to its compact dimensions and low weight. It can be set on adjustable feet for stable bench mounting or used handheld to address critical points on awkwardly shaped components. The small footprint allows integration without altering the weighing workflow, and the option for targeted ionisation supports fast intervention during sample preparation. These features make it suitable for production benches, research labs and trade environments where space is limited but measurement integrity is essential. Safe, straightforward operation compatible with international mains supplies Operation is straightforward: the device runs from a plug‑in power supply that accepts 100–240 V input and is supplied with adapters for AUS, CH, EURO, UK and US sockets, ensuring compatibility in multi‑site operations. With an ozone emission of 0.05 ppm/h, the unit maintains low by‑product levels, supporting safe use in laboratory environments when normal ventilation procedures are followed. Lightweight and portable, the unit requires minimal setup and little maintenance, delivering a practical static‑control solution that complements established weighing equipment and standard operating procedures. Contact Metav Werkzeuge for tailored advice on integrating the KERN YBI-01A ioniser into existing weighing processes or to request application guidance from our specialists in Emmerich Technical data Article number: YBI-01A Manufacturer: KERN GTIN: 4045761194984 Country of origin: Italy Core specifications Dimensions: 115 x 110 x 80 mm Weight: 0.44 kg Input voltage: 100 V - 240 V Ozone emission: 0.05 ppm/h Tariff code: 90160090 Features & compatibility For non-conductive weighing items: plastic, porcelain, glass Placement: adjustable feet or handheld targeting Power supply: adapters included for AUS; CH; EURO; UK; US Power supply type: plug-in power supply eClass: 17111116 FAQ How does the ioniser prevent weighing errors caused by static charge? The device neutralises electrostatic charge by emitting a balanced flow of positive and negative ions; this reduces the electromagnetic interaction between sample and balance and stabilises readings when using the KERN YBI-01A ioniser. Can this device be used with all types of laboratory balances? Yes; the static eliminator is intended for use beside precision balances and scales, particularly where non-conductive materials are weighed and electrostatic effects are a known issue. Is the ozone emission of the unit safe for laboratory use? The ioniser has a measured ozone emission of 0.05 ppm/h, a low level suitable for normal laboratory operation when standard ventilation practices are observed. What power connections are supplied with the unit? A plug‑in power supply accepting 100–240 V is provided, together with adapters for AUS, CH, EURO, UK and US sockets to facilitate use across multiple sites. Will the unit reduce the need for re‑weighing and sample handling? By neutralising charge on light and non-conductive samples, the device reduces measurement drift and attraction errors, which in turn lowers the frequency of retests and extra handling. Manufacturer: KERN — Address: not specified — Contact: not specified
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com