Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
400mm Stand For SXS And IXS Scales, Height 400mm - KERN
Take advantage of a compact and lightweight scale stand that raises platform levels reliably while keeping integration simple; the combination of 400 mm height and broad platform compatibility supports consistent weighing processes. Order the stand directly via Metav Werkzeuge or consult our specialists for application advice. IXS-A03 stand for KERN SXS / IXS — 400 mm height, platform-compatible The IXS-A03 is a compact stand designed to elevate KERN SXS and IXS weighing systems, providing a stable working height for workshop and laboratory environments. 400 mm overall height Compatible with SXS and IXS scales Fits platforms 400×300–650×500 mm Lightweight at 1.1 kg Ensure consistent results with reliable elevation A stable, fixed elevation prevents variations caused by irregular bench heights and simplifies repeatable measurement routines. The scale stand supports weighing platforms across a defined size range, so instruments sit at a constant working height that promotes consistent weighing and reduces handling-related errors. This accessory has been specified to integrate with existing KERN SXS and IXS systems, helping to maintain traceable procedures without complicated retrofitting. Simple integration that saves time on setup The accessory is designed for quick placement beneath approved platforms; compatibility with platform sizes from 400×300×89 mm up to 650×500×133.5 mm makes it suitable for a wide range of standard configurations. The modest weight of 1.1 kg keeps the stand easy to position, while its 400 mm height raises instruments to an ergonomic level for routine tasks. For operators managing multiple workstations, the combination of low mass and robust support reduces downtime during reconfiguration and speeds up workflow changes. Purpose-built for professional workshop and laboratory use Manufactured for compatibility with established weighing ranges, the stand complements precision equipment and supports reliable measurement practice. As a KERN-compatible accessory, it aligns with industry expectations for durability and function, making it an unobtrusive yet effective addition to metrology benches. Where stable platform elevation is required to meet procedural or ergonomic goals, this stand delivers a pragmatic balance of performance and portability. Contact Metav Werkzeuge in Emmerich to discuss how the KERN IXS-A03 stand fits existing scales or to request a tailored supply recommendation. Technical data Article number: IXS-A03 Manufacturer: KERN GTIN: 4045761199750 Facts Height: 400 mm Weight: 1.1 kg Tariff number: 73269098 Special features Compatible with SXS and IXS scales Fits weighing platforms 400×300×89 mm to 650×500×133.5 mm Country of origin: CN FAQ Is the stand compatible with other scale series? The stand is specified for KERN SXS and IXS series and is suitable for platforms within the given size range; compatibility outside those series is not guaranteed. What are the exact dimensions the stand supports? The support range covers weighing platforms from 400×300×89 mm up to 650×500×133.5 mm, as stated for the IXS-A03. What is the total height provided by the stand? The stand provides a fixed height of 400 mm to raise the weighing platform to an ergonomic working level. How heavy is the stand and is it easy to move? The stand weighs 1.1 kg, making it straightforward to reposition as required for different workstations. Who manufactures the accessory and where is it produced? The accessory is produced for KERN; the SKU is IXS-A03 and the country of origin is CN. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
400×300×45 mm Tare Pan Stainless Steel Hygienic Lightweight For Loose Items, 0.57 kg - KERN
Benefit from a stainless-steel, hygienic design combined with low weight and straightforward handling for fast, reliable weighing of loose goods; order the tare pan directly via Metav Werkzeuge or ask our consultants if needed. KERN Tare Pan RFS-A02 — stainless-steel weighing tray for loose items KERN Tare Pan RFS-A02 provides a purpose-built stainless-steel surface for quick, hygienic weighing of loose small parts, fruit and vegetables with compatible bench and laboratory scales. Stainless-steel construction, easy to clean Lightweight and easy handling Designed for loose small parts and produce Accessory for KERN scales and similar systems Faster, more reliable weighing for daily workflows The stainless-steel tray is designed to support efficient weighing tasks in production, retail and workshop environments. Thanks to its hygienic surface and smooth geometry, routine cleaning is quick, reducing machine downtime and maintaining consistent results. The material choice also contributes to weighing accuracy by preventing contamination and reducing offsets that arise from trapped debris. This results in a predictable tare behaviour and fewer repeat measurements, improving throughput on busy benches. Practical handling and compatibility with scale systems This accessory is optimised for integration with bench and counting scales, offering a simple way to extend existing weighing equipment for bulk or loose items. The lightweight construction eases placement and removal, while the shallow profile supports even distribution of small components for stable readings. For workshops and retail counters where speed and repeatability matter, the tray streamlines processes and supports consistent inventory recording. Low-maintenance hygiene for food and small-parts environments Constructed for straightforward maintenance, the tray’s stainless-steel surface is easy to clean and resistant to staining, which is especially beneficial when handling foodstuffs or dusty small parts. The material minimises bacterial harbourage when cleaned correctly and reduces the need for intensive maintenance regimes. Visual inspection is fast, and routine wiping keeps the weighing environment compliant with basic hygiene expectations without specialised tools. For procurement, compatibility checks or technical advice on the KERN tare pan RFS-A02, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — phone and WhatsApp support available for quick consultation Technical Data Article number: RFS-ACC SKU: RFS-A02 Manufacturer: KERN GTIN: 4045761113787 Net weight: 0.57 kg Origin: CN Customs tariff number: 84239010 eClass: 32040606 Facts Net weight 0.57 kg GTIN 4045761113787 Customs tariff 84239010 eClass 32040606 Special features Stainless-steel tray, easy and hygienic to clean Ideal for weighing loose small parts, fruit, vegetables Accessory for scales, product category: weighing accessories FAQ Is the tray suitable for food use? The stainless-steel surface of the KERN tare pan RFS-A02 is described as easy to clean and hygienic, making it suitable for weighing fruit and vegetables under routine cleaning regimes. Which scales is the tray compatible with? The tray is an accessory for bench and counting scales; it is supplied as the tare pan RFS-A02 for KERN systems and can be used with similar platforms that accept removable trays. How should the tray be cleaned to maintain accuracy? Routine wiping with a mild detergent and drying is recommended to keep the weighing surface free of residues that could affect tare values; the KERN tray’s stainless-steel finish supports straightforward maintenance. What is the net weight of the tray and does it affect scale selection? The tare pan has a net weight of 0.57 kg; this should be considered when selecting a scale with an appropriate capacity and resolution for your weighing tasks. KERN — Manufacturer country: CN
405x305x130 mm Roller Conveyor Attachment For Platform Scale, Zinc-Plated Ball-Bearing Rollers - KERN
Kern roller modules combine robust construction with quick integration for smoother conveyor weighing. Benefit from a lightweight aluminium profile frame and conductive, ball-bearing rollers that reduce handling time and maintain measurement reliability. Order the roller conveyor attachment directly via Metav Werkzeuge or request a tailored configuration from our specialists. KERN YRO-01 roller conveyor attachment — aluminium profile frame, ball-bearing rollers The KERN YRO-01 roller conveyor attachment converts a platform scale into a fast, flexible weighing station for production and dispatch lines, suitable for integration with standard KERN platform scales. Converts platform scale into weighing station Modular aluminium profile frame for easy cleaning Hot-dip galvanised ball-bearing steel rollers Conductive rollers for static management in dry areas Faster weighing where throughput matters Integrating a dedicated roller conveyor attachment with an existing platform scale transforms intermittent weighing into a continuous, productive step in the workflow. The modular roller module allows goods to be weighed while moving or at fixed stops, which shortens handling cycles and improves line throughput. Compatibility with established KERN platform models (e.g. IFB, IFS, KFP, KXP, SXS) enables direct retrofitting, reducing installation complexity and keeping commissioning time minimal. The result is an immediate efficiency gain and more consistent process timing across production and shipping stations. Robust build that simplifies maintenance A lightweight aluminium profile frame provides structural rigidity without unnecessary bulk, while the modular construction allows individual parts to be removed for cleaning or replacement. The rollers are hot-dip galvanised, ball-bearing steel, offering low rolling resistance and long service life under repeated use. This combination reduces maintenance intervals and downtimes versus ad hoc conveyor attachments, preserving the operational reliability of connected scales and conveyors. The design supports straightforward servicing and component swaps, which is particularly valuable in high-throughput environments. Consistent handling and safe operation The roller set uses conductive rollers and a compact roller spacing of approximately 30 mm, promoting steady transit and preventing product hang-ups on the module. Designed for longitudinal running direction and for use in dry environments, the system helps manage electrostatic effects while ensuring predictable movement across the weighing surface. Supplied as a single conveyor attachment (without scale), the module keeps the weighing interaction transparent: goods are positioned, weighed and forwarded with minimal manual intervention, reducing handling errors and process variability. Simple retrofitting and configurable performance The attachment is supplied to be plugged directly onto compatible platform bases, so the mechanical fit is immediate and intuitive. Its modular architecture supports customised adjustments such as preload and switching tolerance settings to suit specific production requirements, enabling the attachment to be tuned to conveyor speeds and goods characteristics. Assistance with configuration and individual adaptation is available for tailored setups. As a compact accessory, the unit preserves the primary weighing characteristics of the connected scale while delivering the conveyor functionality needed in fast-paced processing lines. For tailored configuration and prompt supply of the KERN YRO-01 roller conveyor attachment, contact Metav Werkzeuge — supply from Emmerich with expert advice and rapid processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: YRO-01 Manufacturer: KERN GTIN: 4045761190276 Facts Dimensions: 405 x 305 x 130 mm Weight: 6 kg ECLASS: 36120407 Special features Aluminium profile frame Hot-dip galvanised, ball-bearing steel rollers Conductive rollers Roller spacing approx. 30 mm Longitudinal running direction Suitable for dry environments Delivered as 1 roller conveyor attachment (without scale) Compatible with KERN IFB, IFS, KFP, KXP, SXS platform scales Country of origin: DE Tariff number: 84239010 FAQ Can the roller conveyor attachment be used with existing KERN platform scales? The KERN YRO-01 roller conveyor attachment is designed for direct fit on several KERN platform models such as IFB, IFS, KFP, KXP and SXS, enabling fast retrofitting without major mechanical changes. What maintenance is required for the rollers and frame? The modular aluminium profile frame and hot-dip galvanised, ball-bearing rollers on the KERN YRO-01 permit easy disassembly for cleaning or replacement, reducing maintenance time compared with non-modular solutions. Is the attachment suitable for environments with moisture or liquids? The KERN YRO-01 is specified for use in dry environments; the conductive rollers and materials are selected to manage static and ensure consistent operation under those conditions. Does the module affect weighing accuracy of the connected scale? When fitted correctly on compatible platform bases, the roller conveyor attachment maintains the weighing function of the connected scale while enabling goods to be moved on and off the weighing surface with consistent handling characteristics. What is included in the delivery? Delivery comprises one roller conveyor attachment (without scale), supplied as a modular unit ready for mechanical mounting to compatible KERN platform scales. Manufacturer: KERN; Address: Germany; Contact: via Metav Werkzeuge — info@metav-werkzeuge.com, +49 2822 7131930
40°C–160°C Infrared Quartz Glass Heater Fast Response, Scale Accessory - KERN
Take advantage of the precise temperature control and rapid response of this infrared quartz glass solution to reduce thermal drift and improve repeatability in weighing and laboratory set-ups; its broad operating range and OEM availability support flexible integration into production lines. Order the device directly via Metav Werkzeuge or contact our consultants for specification queries. DAB-A02 infrared quartz glass radiator — rapid response, 40–160 °C | KERN The DAB-A02 is an infrared quartz glass radiator designed as an accessory for scales and laboratory applications, delivering controlled radiant heat for temperature-sensitive measurement tasks. Rapid infrared heat-up Operating range 40–160 °C Designed for scale accessories Factory option for OEM integration Improved measurement stability through targeted infrared heating The heater provides focused infrared heating that reduces ambient influences on measurement devices, helping to maintain consistent conditions during weighing and testing. By operating across a 40–160 °C range, the unit supports a variety of applications where thermal drift can compromise results. The quartz glass emitter ensures fast response and a concentrated heat profile, which shortens warm-up periods and contributes to reliable repeatability in precision tasks. Simple integration and measurable process benefits Engineered as an accessory for weighing systems, the radiator is suited for integration where stable temperature is essential for accuracy. Its design allows attachment as an external heat source or inclusion as a factory option for original equipment manufacturers, enabling straightforward retrofitting or OEM installation. The predictable infrared output lowers the need for frequent recalibration, translating into measurable increases in throughput and fewer interrupted operations. Practical advantages for workshop and laboratory use Beyond thermal performance, the unit supports efficient workflow by stabilising sample or instrument temperature without complex enclosures. The quartz glass emitter is resistant to thermal shock and produces even irradiation, which helps to avoid localised hotspots that could affect sensitive components. For precision environments, this means fewer discarded measurements and improved confidence in results—delivering both operational efficiency and process quality. Operational note and suitability Rated for an operating span from 40–160 °C, the device is intended for professional environments and accessory use with scales and related measurement equipment. As a component designed by KERN, it is supplied for integration into existing setups or as a factory-supplied option. Observe relevant safety and installation instructions when fitting the radiator to avoid interference with scale calibration or measurement surfaces. For precise temperature control in weighing applications, discuss integration and availability of the KERN DAB-A02 with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to request technical clarification or compatibility advice. Technical data Article number: DAB-A02 Manufacturer: KERN Product name: Infrared quartz glass radiator Operating temperature: 40–160 °C Facts ECLASS: 36082410 Special features Category: Accessories for scales Factory option available SKU: DAB-A02 FAQ Is the radiator suitable for use with weighing systems? The DAB-A02 infrared quartz glass radiator is designed as an accessory for scales and is suitable where controlled radiant heating improves measurement stability. What operating temperatures does the unit support? The device operates across a 40–160 °C range, enabling use in a variety of temperature-controlled measurement tasks. Can the heater be supplied as an OEM option? Yes, the unit is available as a factory option for OEM integration, facilitating incorporation into customised equipment. How quickly does the quartz emitter respond? The quartz glass emitter provides fast response and focused infrared output, reducing warm-up time compared with larger radiant systems. Are there special installation considerations to avoid affecting calibration? Installation should ensure the heat source does not contact load-bearing surfaces or interfere with weighing mechanics; the radiator is intended for professional installation alongside calibration procedures. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
480mm Stand For Indicator Unit Raising, For KERN DE/DS Platform Scales - KERN
Take advantage of a compact support that raises the evaluation unit for improved ergonomics and clear readouts, offering simple compatibility with KERN DE and KERN DS platform scales. Benefit from a lightweight accessory that integrates without reengineering the workspace. Order the stand directly via Metav Werkzeuge or ask our consultants if needed. KERN DE-A10 Stand — 480 mm height for KERN DE/DS platform scales The DE-A10 stand is a compact support designed to raise the evaluation unit of KERN platform scales, improving operator access and display visibility across industrial and workshop environments. Height approx. 480 mm Compatible with KERN DE and KERN DS Fits plate sizes 308×318×75 and 450×350×115 mm Better posture and faster readings for everyday weighing Mounting the evaluation unit on a dedicated support reduces repetitive bending and offers a clearer line of sight to the display, which improves ergonomics and lowers the risk of operator error. The 480 mm rise positions the indicator at a practical viewing height for bench-top and floor-mounted applications, making routine checks and entries quicker. As a result, measurement tasks become more efficient, supporting steady production flow and fewer interruptions. Proven compatibility that avoids ad hoc adaptations The support has been specified to match common platform formats: it is compatible with KERN platform scales of the DE and DS series, and with weighing plates sized 308×318×75 mm and 450×350×115 mm. This compatibility removes the need for custom brackets or on-site modifications, so the indicator can be elevated reliably while maintaining factory-fit alignments and cable routing. Lightweight design for simple positioning and installation Weighing 1.73 kg, the stand is easy to handle during installation and repositioning without additional lifting equipment. Its compact footprint keeps the workbench accessible and preserves bench space while raising the indicator to a practical height. The modest weight also facilitates rapid deployment across multiple stations when temporary relocation is required. Professional accessory for consistent workshop workflows As an accessory from a recognised manufacturer, the support is intended to integrate into established weighing setups and to standardise the presentation of readouts across work areas. The accessory purpose—raising the evaluation unit—helps to streamline measurement routines and to maintain orderly bench layouts, contributing to reproducible results and a calmer, more productive workplace. Contact Metav Werkzeuge in Emmerich for expert advice and to secure the DE-A10 stand for platform scales; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored information and order coordination Technical data Article number: DE-A10 Manufacturer: KERN GTIN: 4045761111950 Country of origin: China Commodity code: 73269098 Category: Scales accessories Facts Height: approx. 480 mm Weight: 1.73 kg Compatible plate sizes: 308×318×75 mm; 450×350×115 mm eClass: 21170601 Special features Suitable for KERN DE and KERN DS platform scales Purpose: raising the evaluation unit Product group: Stands / accessories FAQ Which platform scales are compatible with this stand? The DE-A10 stand is compatible with KERN DE and KERN DS platform scales designed for the specified plate dimensions. What is the lifting height of the support? The support provides an approximate height of 480 mm, positioning the indicator for improved visibility. How much does the stand weigh? The stand has a weight of 1.73 kg, facilitating straightforward handling during installation. Which weighing plate sizes does the stand accept? It fits weighing plates sized 308×318×75 mm and 450×350×115 mm as specified for the compatible KERN models. Is the material of the stand specified? Material details are not provided in the product data; further specification can be requested for clarification. Manufacturer: KERN — Address: not provided · Contact: not provided
480mm Stand For Indicator/Scale Display Unit, Height Raise Accessory - KERN
Take advantage of a compact, 480 mm elevation that improves indicator readability and shortens handling time; the lightweight construction at 1.23 kg keeps installation and repositioning simple. Combine these practical features with the trusted KERN quality and arrange supply directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN Stativ EOB-A01N – Indicator stand with approx. 480 mm elevation The KERN Stativ EOB-A01N is a compact stand designed to raise scale indicator units for clearer viewing and smoother bench workflows in industrial and workshop settings Elevates scale indicator by approx. 480 mm Compatible with weighing plates 315×305×57 mm Lightweight at 1.23 kg for easy handling Better readability and fewer handling errors Raising the indicator improves visibility and ergonomics, which in turn supports faster, more reliable readings during repetitive weighing tasks. The 480 mm elevation positions the display at a more comfortable height for operators working at benches or machines, reducing the need to bend or stretch. This ergonomic advantage contributes directly to workflow efficiency by lowering the time spent adjusting viewing angles and helps maintain consistent measuring procedures. Compact design that integrates into workshop routines The compact footprint and lightweight nature of the support make it straightforward to incorporate into existing setups without extensive reorganisation. At 1.23 kg, the unit is portable enough for reallocation between workstations yet designed to remain in place during standard operation. The modest dimensions suit confined bench areas and permit flexible positioning of the indicator, enabling a neat and practical workstation that supports uninterrupted production. Clear compatibility and simple integration with weighing systems Engineered as an accessory for scale indicators, the stand is specified for models with a weighing plate size of 315×305×57 mm, ensuring a direct fit where such plates are used. The straightforward purpose of the stand—raising the evaluating/display unit—means installation requires minimal adjustment, helping to avoid downtime. Supplied by a specialist distributor, the item benefits from a quality-controlled logistics chain that supports dependable delivery and product traceability. Practical benefits for procurement and workshop managers Selecting a dedicated indicator stand reduces ad-hoc supports and improvised solutions that can compromise repeatability. The engineered solution gives procurement confidence through clear technical matching, while workshop managers gain an easily implemented device that standardises the presentation of measurement results. The compact accessory supports consistent operational layouts and contributes to an organised bench environment. For supply and expert advice on integrating the KERN stand into existing weighing systems, contact Metav Werkzeuge for precise delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Article number: EOB-A01N SKU: EOB-A01N Manufacturer: KERN GTIN: 4045761192164 Country of origin: CN Tariff number: 73269098 Core data Weight: 1.23 kg Height: approx. 480 mm Compatible plate size: 315×305×57 mm Special features Accessory for scale indicators Purpose: raises the evaluating/display unit Compact, lightweight construction FAQ Which weighing systems is the stand compatible with? The stand is intended for use with indicators that sit above weighing plates sized 315×305×57 mm; the KERN Stativ EOB-A01N is specified to match such configurations. How much does the stand weigh and is it portable? The support weighs 1.23 kg, making it easy to reposition between workstations while remaining stable in normal use. Is the stand suitable for laboratory and workshop environments? Yes — the stand was designed to raise indicator units for clearer viewing in bench and workshop settings, aiding ergonomic handling and routine measurement tasks. Where does the product come from and who supplies it? The product is manufactured under the KERN brand and shipped from the supplier network; Metav Werkzeuge handles distribution and can provide logistics details. KERN — Country of origin: CN — GTIN: 4045761192164
48h Internal Battery Pack Three-Point Auto-Off For ECE Bench Scales - KERN
Take advantage of the internal battery operation and up to 48 h runtime to reduce downtime and enable flexible use of bench scales; the AUTO‑OFF function preserves power and is switchable for continuous operation when required. Order the internal battery PCB‑A01 directly via Metav Werkzeuge or ask our consultants if needed. KERN PCB‑A01 — Internal battery pack for ECE bench scales (up to 48 h runtime) KERN PCB‑A01 is an internal power module designed to supply ECE bench scales with reliable portable operation and energy-saving features Internal battery operation for bench scales Up to 48 h runtime without backlight Recharge in approximately 8 h Selectable AUTO‑OFF function for battery preservation Compatible with KERN PCB, ECB, ECE, FKB‑A series Extended runtime that keeps production flowing The internal power module delivers up to 48 h of operation without backlight, enabling extended measuring periods away from mains power and reducing interruptions on the shop floor. The long battery runtime is particularly beneficial for batch weighing tasks and mobile use in inspections, because fewer charging cycles mean fewer workflow breaks. The AUTO‑OFF feature is provided to conserve energy during idle periods and can be disabled when continuous operation is required, giving a balance of economy and availability. Fast recharging and practical workshop handling A recharge interval of about 8 h ensures the module is ready again after a standard work period; the approx. 8 h charging time fits overnight or between shifts without additional logistical effort. With a low unit weight around 0.2 kg, the module is unobtrusive inside the instrument and does not compromise handling or transport of the scale. The compact design supports straightforward maintenance cycles and predictable availability of measuring equipment. Compatibility that simplifies fleet management Compatibility with the KERN PCB, ECB, ECE and FKB‑A series reduces the number of spare parts required across multiple scale models, simplifying procurement and spare-part storage. This compatibility ensures that a single battery module type can be stocked to support different bench scales, lowering administrative overhead and improving response times when replacements are needed. Technical matching of form factor and electrical connection avoids adaptation work and speeds return to service. For purchasing advice or to arrange a tailored supply for scale fleets, contact Metav Werkzeuge — our consultants can clarify model fitment and delivery options. Technical data Article number: PCB-A01 SKU: PCB-A01 GTIN: 4045761085657 Manufacturer: KERN Country of origin: CN Core data Battery runtime: up to 48 h without backlight Charging time: approx. 8 h Weight: 0.2 kg Tariff number: 85075000 ECLASS: 21059207 Special features Internal battery operation AUTO‑OFF function, switchable Compatibility: KERN PCB, ECB, ECE, FKB‑A series Intended use: bench scales / ECE table scales FAQ Is this battery module compatible with other KERN scale series? The KERN PCB‑A01 internal battery pack is compatible with models from the KERN PCB, ECB, ECE and FKB‑A series as stated in the product data. How long does a full recharge take? A full recharge for the PCB‑A01 typically takes approximately 8 h, which suits overnight charging or between two shifts. What runtime can be expected in daily use? Under normal conditions and without backlight, the battery module provides up to 48 h of operation; actual runtime depends on usage patterns and display settings. Can the AUTO‑OFF function be disabled for continuous operation? Yes, the AUTO‑OFF feature on the module is switchable and can be deactivated when continuous power is required for uninterrupted measuring cycles. Is the battery module designed for portable weighing setups? The unit’s compact form and low weight make the PCB‑A01 suitable for portable or mobile bench-scale applications where mains power is not available KERN, China, contact not provided
5 pcs Protection Hood For FCE And FCB, Accessory - KERN
Benefit from the hood’s direct compatibility with KERN FCE and FCB scales, its lightweight construction and ready-fit design for fast replacement; keep measurement stations clean and reduce downtime. Order the protective hoods via Metav Werkzeuge or consult our team for further technical details. Protective hood FCB-A02S05 (for KERN FCE & FCB) — pack of 5, lightweight fit Protective hood FCB-A02S05 designed for rapid protection of scale assemblies and straightforward replacement in professional environments Protective hood for FCE and FCB scales Pack of 5 for immediate replacement stock Approx. 80 g per hood for minimal load Quick-fit design for fast maintenance Preserve measurement reliability with a simple protective solution The protective hood provides a targeted barrier that keeps sensitive scale components free from dust, splashes and incidental debris, helping to maintain consistent performance. Its compatibility with both FCE and FCB model ranges ensures that service intervals are not extended unnecessarily by contamination. The compact design contributes only approx. 80 g to the weighing assembly, reducing influence on tare and calibration while permitting straightforward exchange when required. For workshops seeking predictable throughput, this accessory supports continuous operation by reducing unplanned cleaning and adjustment. Reduce downtime and simplify maintenance routines A small inventory of spare hoods eliminates waiting time for replacement parts and minimises production interruptions. Supplied as a pack of 5, the set suits multi-station workshops and service departments that prioritise rapid turnover and predictable maintenance windows. The hood’s form is engineered for quick-fit mounting, which shortens maintenance tasks to a matter of minutes rather than hours. For teams less familiar with scale maintenance, a simple replacement procedure reduces the need for specialist intervention while supporting correct handling and preserving the instrument’s calibration stability. Practical supply and professional sourcing for reliability Sourced through established channels, the hoods arrive ready to integrate with existing scale equipment and spare-part strategies. Metav’s role as a precision partner means access to a broad product range and reliable logistics from Emmerich; stocking compatible protective accessories like these supports efficient workshop workflows and reduces supplier complexity. The lightweight, professional-grade accessory is aimed at industrial and craft environments where predictable measurements and uninterrupted operation are essential for productivity and quality assurance. Contact Metav Werkzeuge in Emmerich for tailored advice on compatibility, spare-part planning or to request further product information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: FCB-A02S05 SKU: FCB-A02S05 Manufacturer: KERN Country of origin: China HS code: 39269097 Core data Weight: 0.08 kg Delivery quantity: 5 pieces eClass: 24322502 Special features Compatible with FCE and FCB scale models Category: Scales accessory (Zubehör) Fast dispatch noted in product description Intended for professional workshop use FAQ How does the hood attach to KERN FCE and FCB models? The protective hood FCB-A02S05 is designed for a quick-fit attachment to compatible KERN FCE and FCB scale housings, allowing fast replacement without special tools. Is the pack suitable for multi-station workshops? Yes, the pack of 5 hoods provides immediate replacement stock for several stations or for scheduled maintenance intervals. What is the weight of a single hood and does it affect calibration? A single hood weighs approximately 0.08 kg; the low mass helps avoid significant influence on tare settings and calibration stability when installed correctly. Can these hoods protect against liquid spills? The hoods are intended to shield scale components from incidental splashes and dust; for full liquid protection, consult detailed specifications to confirm suitability for specific conditions. Where can further technical details for the FCB-A02S05 be obtained? Additional technical information and compatibility queries can be provided by Metav Werkzeuge, which supplies the FCB-A02S05 for professional applications KERN — Country of origin: China — Contact via Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930
5 pcs Protective Hood For Indicator Unit, Over Device - KERN
Take advantage of reliable protection, compact storage and simple replacement to keep indicator units operational; the lightweight construction and pack of 5 provide immediate spares for continuous workflows. Order directly via Metav Werkzeuge or consult our specialists for application advice. KERN Protective Hood EOB-A04SB05 — Pack of 5 for indicator units The Protective Hood is a compact cover designed to sit over evaluation and indicator units used with scales, offering a practical barrier in workshop and industrial environments. Pack of 5 protective hoods Lightweight 50 g each Fits indicator and evaluation units Ready spares to minimise downtime Keep scales running with minimal interruption The primary advantage of this cover is operational continuity: supplied as a pack of 5, it enables immediate replacement when an on-site unit requires protection or a quick swap during maintenance. Lightweight at 50 g each, the covers can be stored conveniently without adding bulk to workshop inventory, supporting efficient stock management and reducing logistics complexity. Specified for use with indicator and evaluation units, the solution supports consistent measurement availability and helps uphold production schedules. Protect sensitive electronics without complexity Designed to be fitted over an indicator, the cover forms a practical barrier for displays and controls, helping to prevent dust ingress and accidental contact in demanding environments. The simple geometry allows fast installation and removal, making the component suitable as a routine protective accessory. By using a purpose-made cover rather than improvised protection, the risk of damage to delicate electronics is lowered and calibration intervals can be preserved, which contributes to predictable measurement reliability. Procurement made straightforward for workshops and retailers Sourced from KERN and offered through Metav’s distribution, the product is ideally suited to industrial buyers looking to streamline supplies. Metav’s Emmerich location operates as a quality filter for the European market, combining wide selection with dependable availability — a benefit for purchasing managers who require consistent delivery. The compact pack format and straightforward application make this protective hood an efficient addition to workshop inventories and spare-part kits, enhancing uptime and simplifying stock lists. Contact Metav Werkzeuge in Emmerich for fast supply of KERN protective hoods (EOB-A04SB05); email info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271 to arrange delivery or a specification check Technical data Article number: EOB SKU: EOB-A04SB05 Manufacturer: KERN Eclass: 24322502 Facts Weight: 0.05 kg Tariff number: 39269097 Origin: CN Special features Included quantity: 5 pieces Intended use: over evaluation / indicator units Category: Scales accessories FAQ How many covers are included in one package? The package contains five covers; the KERN EOB-A04SB05 is supplied as a pack of 5 for convenient replacement. Is the cover suitable for common scale indicator units? The hood is designed to fit over evaluation and indicator units used with scales; compatibility with specific models should be checked against device dimensions before purchase. What is the weight per cover? Each hood weighs 0.05 kg (approximately 50 g), making the set easy to store and handle. KERN — Origin: China — Contact: not provided in product data
5 t Shackle For Crane Scale, Galvanised Ductile Iron With Painted Bolt, 2 Pieces Included - KERN
Take advantage of a high-strength connection that combines long-term corrosion protection and secure fastening for reliable lifting operations; order the required shackle directly via Metav Werkzeuge or contact our consultants for compatibility details. YSC-01 Shackle for Crane Scale – High-strength, Hot-dip Galvanised Forged Steel A YSC-01 Shackle for the KERN crane scale, engineered as a curved, hot-dip galvanised forged-steel link with a painted screw bolt, suitable for crane scale models with a weighing range up to 5 t High-strength forged shackle, curved form Hot-dip galvanised, painted steel finish Includes painted screw bolt, secure fastening Suitable for crane scales up to 5 t Robust connection for heavy lifting The forged, curved bracket provides a reliable mechanical interface between load and instrument. Manufactured in hot-dip galvanised forged steel, the link is dimensioned to distribute forces evenly across the eye, reducing local stress peaks and helping to maintain measurement integrity under load. Compatibility with KERN HFA and HFC crane scales for models rated up to 5 t ensures the shackle integrates with common industrial weighing systems and supports consistent, traceable lifting operations. Secure fastening that simplifies handling A painted screw bolt secures the connection and is designed for straightforward installation and removal while maintaining a high level of locking security. The secure screw bolt reduces the risk of accidental loosening during use and aids rapid assembly in workshop and site environments. At a handling weight of approximately 1.5 kg, the component is easy to position without compromising robustness, making routine changes or inspections uncomplicated for technicians and service staff. Low maintenance for continuous operation The hot-dip galvanised finish and painted bolt combine to offer enhanced corrosion resistance, extending service life in galvanic or outdoor environments and minimising downtime for replacement. As a German-made accessory from KERN, the design focuses on durability and fit with established crane weighing ranges, providing a cost-effective way to keep weighing setups operational without compromising safety or performance. Contact Metav Werkzeuge in Emmerich for precise compatibility checks or to discuss order options; our consultants can confirm suitability for your KERN crane scale models and provide prompt supply from our German warehouse (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: YSC-01 GTIN: 4045761193086 Manufacturer: KERN Country of origin: DE Core figures Weight: 1.5 kg Suitable for weighing range: up to 5 t Tariff number: 84239010 Special features Hot-dip galvanised forged-steel bracket Curved form for even load distribution Painted screw bolt for secure fastening Compatible with KERN HFA and KERN HFC crane scales Scope of delivery includes 2 shackles with painted screw bolt FAQ Is the shackle compatible with KERN crane scales? The YSC-01 shackle is compatible with KERN HFA and HFC crane scales for models with a weighing range up to 5 t. What material and corrosion protection does the shackle use? The shackle is made from forged steel with a hot-dip galvanised finish and a painted screw bolt to provide enhanced corrosion resistance. What is included in the delivery? The scope of delivery lists 2 shackles with painted screw bolt as supplied items for this SKU (YSC-01). How heavy is the shackle and how does that affect handling? The component weighs approximately 1.5 kg, allowing for easy handling during installation while maintaining required robustness. Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich, Germany; Contact: info@metav-werkzeuge.com, +49 2822 7131930
5 t Shackle for Crane Scale, Hot-Dip Galvanised Steel Cast Bow With Painted Bolt, Pack of 2 - KERN
Take advantage of a high-strength, hot-dip galvanised cast-steel construction combined with a secure screw-bolt fixing and compatibility with heavy-capacity KERN crane scales to maintain safe, uninterrupted lifting operations. Order the shackle set directly via Metav Werkzeuge or contact the consultants for technical clarification and fast supply from Emmerich. KERN YSC-02 shackle — high-strength, hot-dip galvanised cast-steel, screw-bolt fixing A robust shackle designed as an accessory for KERN crane scales; the YSC-02 provides a secure connection point for models with a weighing range of 5 tonnes and above and is supplied as a set for immediate use High-strength cast steel construction Hot-dip galvanised for corrosion resistance Includes painted screw bolt for secure fixing Compatible with KERN HFA and HFC ≥5 t models Reliable connection for heavy lifting operations The hot-dip galvanised cast steel body gives the shackle excellent resistance to mechanical stress and environmental wear, ensuring long service life in industrial environments. Finished in a protective coating and supplied with a painted screw bolt, the component is intended to maintain clamping integrity under repeated loading. The robust design reduces the risk of deformation during routine use and supports consistent performance when paired with high-capacity crane scales. Clear compatibility reduces installation uncertainty Designed specifically for use with KERN HFA and KERN HFC crane scales for models with a weighing range of 5 tonnes or more, the component simplifies selection by matching proven scale families. Supplied as a set of two shackles, the package supports common rigging arrangements and minimises downtime caused by part shortages. The compatibility focus removes guesswork during maintenance planning and ensures a straightforward fit with the stated scale models. Practical benefits for workshop logistics and safety At 4.3 kg per shackle, the component balances manageable handling with the mass needed for structural integrity. The curved (bowed) form distributes load evenly across the shackle body, which helps to reduce stress concentrations at attachment points. The inclusion of a painted screw bolt provides a visible, corrosion-protected means of securing the load pin, aiding both installation speed and inspection routines in production and maintenance settings. Built to integrate with precision partners and supply chains Sourced for compatibility with established KERN crane scales, the product supports a supply strategy that values reliability and traceability. The robust finish and material selection are compatible with regular workshop environments and help to maintain inspection intervals without unnecessary replacements. Choosing a standardised connecting accessory simplifies asset management and contributes to safer lifting workflows across different lifting stations. Contact Metav Werkzeuge for tailored advice on integrating the KERN YSC-02 shackle into existing lifting equipment and to arrange delivery from our Emmerich warehouse Technical data SKU: YSC-02 Manufacturer: KERN GTIN: 4045761193093 Country of origin: DE Tariff code: 84239010 ECLASS: 23130102 Numbers / core technical data Weight: 4.3 kg Included quantity: 2 pieces Suitable for crane scales with weighing range: ≥ 5 t Designs / special features Material: hot-dip galvanised cast-steel, bowed form Fixing: painted screw bolt included Application: accessory for crane scales KERN HFA and HFC (models ≥ 5 t) Packaging: set of two shackles FAQ What crane scales are compatible with this shackle? The KERN YSC-02 shackle is intended for use with KERN HFA and KERN HFC crane scales for models with a weighing range of 5 tonnes or more. Is the shackle protected against corrosion for outdoor use? Yes. The shackle features a hot-dip galvanised finish and a painted screw bolt to provide enhanced corrosion resistance for typical workshop and external environments. How many shackles are supplied with one order? The delivery includes a set of two shackles with painted screw bolts, enabling immediate installation in common lifting configurations. What is the weight of each shackle and how does that affect handling? Each shackle weighs 4.3 kg; the mass ensures structural stability while remaining manageable for standard workshop handling procedures. KERN — Germany
5-Pack Protective Hood For FKB And CKE, For Scales - KERN
Compact, lightweight protective covers in a five-piece pack support hygienic weighing and simple maintenance for KERN FKB and CKE scales. Order the FKB-A02S05 directly via Metav Werkzeuge or ask our consultants if needed. FKB-A02S05 Protective hood for KERN FKB and CKE scales, pack of 5 The FKB-A02S05 protective hood provides hygienic coverage and dust protection for weighing stations and industrial scales Five-piece protective hood set Compatible with KERN FKB and CKE Lightweight at 0.07 kg total Fast replacement for hygienic scales Maintain hygienic weighing with minimal effort The protective hood is designed to reduce contamination of the weighing area and simplify routine cleaning. By covering sensitive components on KERN FKB and CKE models, the cover decreases the frequency of intensive cleaning cycles and safeguards calibration stability. The combination of a precise fit and a lightweight construction supports rapid swaps during production runs, which helps to maintain throughput while preserving measurement reliability. Reduce downtime and streamline workshop workflow A replacement strategy centred on ready-to-fit covers minimises handling time and keeps scales operational. The five-piece supply enables scheduled changeovers without sourcing parts between shifts, meaning less production interruption and more predictable maintenance planning. The simple mechanics of replacing the cover ensure technicians spend less time on non-value tasks and more time on core metrology and assembly duties. Clear specification for procurement and stock planning Key identification and handling data support procurement processes and inventory control. The set is supplied under SKU FKB-A02S05 and is associated with the KERN accessory range for FKB and CKE scales; the lightweight pack (0.07 kg) is convenient for storage and internal logistics. The product’s intended role as a protective accessory makes it a practical addition to workshop spare-part kits and quality-control stations, aligning with standard hygiene and contamination-prevention measures. Contact Metav Werkzeuge today in Emmerich for availability and compatibility advice on the KERN FKB-A02S05 protective hood; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: FKB-A02S05 Manufacturer: KERN GTIN: 4045761185456 Country of origin: CN Tariff number: 39269097 Facts Weight: 0.07 kg Pack contents: 5 items ECLASS: 24322502 Special features Suitable for scales: FKB and CKE Product group: Accessories (Waagen > Zubehör) Lightweight protective hood for hygienic protection FAQ Is the hood compatible with KERN FKB models? The FKB-A02S05 protective hood from KERN is specified for use with FKB and CKE scale ranges and is manufactured to fit those housings. What is included in the pack? The product is supplied as a five-piece set to allow rapid replacement and basic workshop stocking. How heavy is the set and does it affect handling? At 0.07 kg the set is lightweight, facilitating quick swaps and easy storage without significant logistical impact. Can these covers reduce cleaning intervals for weighing equipment? When used as a protective barrier, the covers lower direct contamination risk and can contribute to reduced frequency of deep cleaning, supporting uninterrupted measurement work. KERN — Address: not provided — Contact: not provided
5-Pack Protective Hood For Scales Series CDS, DE, DS, Fits Evaluator Unit - KERN
The compact set of protective hoods combines straightforward compatibility with a low-weight design to keep scale indicators operating reliably in busy weighing environments; supplied as a pack of 5, it reduces downtime and simplifies replacements. Take advantage of the proven compatibility with KERN CDS, EOA, DE and DS series and the easy handling that supports uninterrupted weighing processes. Order the KERN DE-A12S05 directly via Metav Werkzeuge or ask our consultants if needed. KERN DE-A12S05 Protective Hood for Scales — Pack of 5, Indicator Protection The KERN DE-A12S05 protective hood is a purpose-made accessory for protecting scale indicators and evaluation units in industrial and retail weighing applications. Pack of 5 protective hoods Compatible with CDS, EOA, DE and DS scales Protects indicator from dust and splashes Lightweight, approx. 90 g per hood Improved uptime through targeted indicator protection A lightweight protective hood minimises contamination of delicate indicator electronics, reducing the frequency of service interventions and calibration checks. Designed to cover the evaluation unit, the hood acts as a barrier against dust and incidental splashes, which helps to maintain measurement integrity and prevents avoidable faults. By preserving the operational condition of the display and controls, the accessory contributes to a more consistent production flow and lower indirect maintenance costs. The compact design also supports quick fitment and replacement, ensuring that normal weighing operations resume without delay. Seamless integration with KERN weighing systems Compatibility with the CDS, EOA, DE and DS series means the hood integrates into existing weighing setups without adaptation, providing a standardised protective solution across different scale types. Supplied as a pack of 5, the set is suitable for multi-station environments or for keeping a replacement supply on hand, which streamlines workshop logistics and reduces administrative effort. Clear compatibility reduces selection uncertainty and makes this accessory a practical addition for procurement planning in industrial metrology and retail weighing contexts. Practical handling and low storage effort At roughly 90 g per hood, the accessory is easy to handle during routine tasks and simple to store when not in use. The modest weight and compact footprint mean that multiple units can be kept on the workshop bench or in a service kit without occupying valuable space. Where visual cleanliness and quick maintenance are priorities, the design supports fast exchange and straightforward housekeeping procedures. Further technical details and application guidance are available from Metav Werkzeuge for those specifying accessories for large-scale installations. For reliable indicator protection choose the KERN DE-A12S05 pack via Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: DE-A12S05 Manufacturer: KERN GTIN: 4045761184480 Country of origin: CN Package contents: 5 pieces Facts Weight: 0.09 kg Tariff number: 39269097 Eclass: 24322502 Special features Compatible with counting scale CDS, package scales EOA and DE, platform scale DS Protective hood for indicator/evaluation unit Packaged as a 5-piece set FAQ Is the hood compatible with all KERN scale displays? The KERN DE-A12S05 is specified for use with the CDS counting scale, the EOA and DE package scales, and the DS platform scale; compatibility with other display models should be verified against the instrument dimensions. What is included in the delivery? Delivery comprises a pack of five protective hoods (KERN DE-A12S05), intended for straightforward replacement or multi-station coverage. Can the hood protect against liquid ingress? The protective hood provides barrier protection against dust and incidental splashes to the indicator; it is not specified as a waterproof enclosure for immersion or sustained exposure to liquids. How heavy is a single hood and what does that mean for handling? Each hood weighs approximately 0.09 kg, making it easy to remove and replace during routine maintenance or cleaning without special handling equipment. Is the hood suitable for use in retail and industrial environments? Yes, the accessory is designed to suit both workshop and retail weighing situations where indicators require protection from contamination and light mechanical impact. KERN · Origin: CN · GTIN: 4045761184480
5-Pack 130x130mm Protective Hood Over Keyboard And Housing, For 440-A/N - KERN
Take advantage of robust protection for scale keyboards and housings, with a five-piece set that simplifies routine maintenance and reduces downtime; order the protective cover directly via Metav Werkzeuge or ask our consultants if needed. KERN 440-450-002S05 Protective Cover for 440-A/N — 5-piece set, for 130 x 130 mm platforms The KERN 440-450-002S05 is a protective cover designed to shield the scale keyboard and casing, suitable for use where weighing equipment requires reliable everyday protection in workshops and laboratories. Five-piece set for immediate replacement Fits 130 x 130 mm weighing platforms Protects keyboard and housing from dust and splashes Reduce maintenance and protect equipment A simple, economical barrier extends the service life of weighing instruments by preventing dust accumulation and ordinary contamination of the keyboard and housing. The cover reduces the need for frequent cleaning of sensitive components, which in turn lowers maintenance intervals and potential repair costs. As a lightweight, disposable solution, the set supports uninterrupted production by enabling quick replacement of worn covers, keeping instruments operational with minimal downtime. Designed for precise fit and practical use Engineered for scales with a 130 x 130 mm weighing surface and specifically matching the 440-A/N series, the cover ensures a tailored fit that does not impede access to controls or visibility of the display. This compatibility supports consistent weighing performance because the protection does not affect load cells or measurement accuracy. The pack format supplies multiple covers so a clean replacement is always at hand, maintaining accuracy and hygiene where repeatable results are essential. Streamline hygiene and operational readiness Supplying five covers in one package provides an efficient stock rotation for quality-focused shops and labs, supporting cleanliness protocols and reducing cross-contamination risks during routine handling. The solution is especially valuable in environments that require frequent changeovers or have strict cleanliness standards; each cover acts as a first line of defence against abrasive dust and incidental spillage, helping to safeguard sensitive electronics without complex maintenance procedures. For reliable protection and swift supply from Emmerich, contact Metav Werkzeuge to request the KERN 440-450-002S05 protective cover set or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 440 SKU: 440-450-002S05 Manufacturer: KERN GTIN: 4045761185388 Facts Weight: 0.2 kg Country of origin: CN Commodity code: 39269097 eClass: 24322502 Special features Set contains 5 protective covers Protects keyboard and housing Suitable for weighing surfaces 130 x 130 mm Product group: Scales accessories Category path: Waagen › Zubehör FAQ What does the protective cover protect against? The KERN 440-450-002S05 protective cover shields the scale keyboard and casing from dust and light splashes, helping to reduce contamination and prolong equipment service life. Which scales are compatible with this cover? Compatibility is for scales with a 130 x 130 mm weighing surface; the cover is designed to fit the 440-A/N series and similar models with that platform size. How often should covers be replaced? Replacement depends on usage and environment; the five-piece set provides ready spares so covers can be changed whenever visible wear or contamination occurs to maintain hygiene and performance. Can the covers be cleaned and reused? These covers are intended as practical protection with straightforward replacement; if cleaning is attempted, ensure methods do not leave residues that could affect the keyboard or casing. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
5-Pack 440-A/N Protective Cover For Scale Keyboard And Housing - KERN
Take advantage of reliable instrument protection and simple compatibility with Ø105 mm weighing pans to reduce downtime and protect sensitive controls; order or request advice directly from Metav Werkzeuge if further specification is required. KERN Protective Cover for Scales — keyboard and housing protection, fits Ø105 mm A protective cover made to shield the keyboard and housing of compatible KERN scales, suited for workshop and laboratory weighing tasks Protects keyboard and housing of scales Designed for Ø105 mm weighing pans Lightweight protection with minimal footprint Robust design for workshop and lab environments Minimise downtime with efficient protection A correctly chosen protective hood helps to cut maintenance interruptions and prolong the operational life of weighing equipment. The protective cover offers direct shielding for controls and housing, which reduces downtime by preventing dust ingress and accidental spill damage. Compatibility with a weighing pan Ø105 mm ensures the cover fits standard compact balances, maintaining the instrument’s functionality while providing continuous safeguarding. This practical approach supports steady production flow and predictable calibration intervals. Low impact on functionality, simple handling Installation and removal are designed to be quick so that routine work is not delayed. At 0.02 kg, the cover is exceptionally light, creating a low-profile barrier that does not interfere with display visibility or keyboard access. The form factor is engineered to protect both keyboard and housing without obstructing normal operation, enabling staff to keep measurement processes uninterrupted. This balance of protection and accessibility supports efficient workflows in busy workshops and quality-control benches. Practical logistics and trusted supply As a purpose-made accessory for compact balances, the cover simplifies spare-part management and helps maintain hygienic and tidy workstations. Metav’s role as a precision partner adds assurance: product selection is filtered through a central quality control in Emmerich, and stock management aims to support reliable supply for industry and craft. The combination of practical protection and dependable sourcing supports sustained performance and customer confidence in routine measuring tasks. For technical advice or tailored supply of KERN protective covers, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt guidance and order coordination. Technical data SKU: 440-330-002S05 Manufacturer: KERN GTIN: 4045761185371 Country of origin: China HS code: 39269097 Core data Weight: 0.02 kg Compatible weighing pan diameter: Ø105 mm ECLASS: 24322502 Special features Protection for keyboard and housing Designed for models 440-A/N Application: accessory for scales and weighing stations FAQ Is this cover compatible with my compact balance? The cover is compatible with models that have a weighing pan Ø105 mm; check the dimension of the pan to confirm fit for the KERN protective cover. Will the cover affect weighing accuracy? No — the protective cover is designed to sit over the keyboard and housing without contacting the weighing surface, so weighing accuracy of the KERN unit remains unaffected. How should the protective cover be cleaned? Clean the cover with a soft, damp cloth and mild detergent; avoid aggressive solvents. Regular cleaning helps to maintain hygiene around the scale and extend the accessory’s service life. Can this cover be used in laboratory and workshop environments? Yes — the cover is suitable for workshop and laboratory use, offering protection against dust and incidental spills while preserving access to controls. KERN — Country of origin: China
5-Pack 440-A/N Protective Hood For Scale Keyboard And Housing, - KERN
Combine targeted protection with precise compatibility and straightforward storage to keep weighing equipment ready for use. Benefit from a solution that shields keyboard and housing while matching the 440‑A/N form factor; order directly via Metav Werkzeuge or consult our specialists for guidance. KERN 440-210-002S05 Protective Cover — 5-piece set for 440-A/N, keyboard and housing protection The KERN 440-210-002S05 protective cover provides a practical barrier for the control surface and casing of compatible weighing instruments, designed for everyday workshop and laboratory environments. Protection for keyboard and housing of scales Designed for KERN 440-A/N models Suitable for weighing pan Ø81 mm Supplied as set of five Reliable protection that preserves measurement integrity The cover offers targeted protection for sensitive components, preventing dust, debris and light contamination from settling on the operator panel and outer casing. By keeping the control surface clean, the risk of measurement interference through soiling or ingress is reduced, supporting uninterrupted operation and fewer service interventions. Manufactured to match the form of common bench scales, the accessory supports routine workshop processes with minimal handling and is suited to both production and inspection environments. Compatibility that speeds workflow and reduces downtime Designed specifically for the 440‑A/N series and models featuring a weighing pan Ø81 mm, the accessory ensures a snug fit that does not impede daily use. The lightweight 0.02 kg construction adds negligible bulk to storage and transport, allowing multiple covers to be kept on hand for rapid replacement between shifts. Reliable compatibility means less time spent adapting or modifying parts, so instrument availability is maximised and scheduling of metrology tasks becomes more predictable. A compact workshop solution that supports efficiency Supplied as a practical set, the cover helps maintain a consistent standard across several workstations or mobile balances, reducing the need for ad‑hoc protection methods that can lead to wear or accidental damage. Backed by the KERN brand, the accessory contributes to a low‑effort maintenance routine and a tidier workspace, which in turn supports faster inspection cycles and a professional presentation. For operations seeking simple, cost‑effective measures to extend equipment life, this protective cover represents a pragmatic option. Contact Metav Werkzeuge in Emmerich for reliable supply of genuine KERN protective covers and expert advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: 440-210-002S05 Manufacturer: KERN GTIN: 4045761185364 Country of origin: CN Facts Weight: 0.02 kg Commodity code: 39269097 Article group: 440 Special features Protection for keyboard and housing Designed for 440-A/N weighing devices Suitable for weighing pan Ø81 mm Supplied as set of five FAQ Which scales are compatible with this protective cover? Compatible with KERN 440‑A/N series and models that use a weighing pan with a diameter of Ø81 mm; the SKU is 440-210-002S05. Is the cover supplied as individual pieces or as a set? The product is supplied as a set of five protective covers for straightforward replacement and storage. Will the cover affect operation of the keypad or display? The design covers the keyboard and housing while allowing access and visibility required for normal operation; the protective design is intended to avoid interference. What is the weight of a single cover? A single unit weighs approximately 0.02 kg, making it easy to handle and store. Where is the accessory manufactured? The protective cover is manufactured in China (CN) and distributed under the KERN product group. KERN — Origin: China (CN); SKU 440-210-002S05
5-Pack Protective Cover For EOC/IOC/BID/UID Scales, Splash Protection - KERN
Take advantage of the combination of straightforward protection, universal compatibility with KERN scale series, and a compact five-piece supply for uninterrupted weighing operations. Secure procurement via Metav Werkzeuge or contact our consultants for tailored advice. KERN EOC-A01S05 protective cover — 5-piece set, compatible with EOC/IOC/BID/UID scales The KERN EOC-A01S05 protective cover is a lightweight accessory designed to shield precision scales from dust and light splashes in industrial and laboratory environments. 5-piece protective cover set Compatible with EOC, IOC, BID and UID scales Lightweight for easy handling and storage Protects against dust and minor splashes Keep measurements reliable by preventing contamination A simple barrier such as a protective cover reduces the risk of particulate ingress and accidental spill contact that can compromise sensitive weighing components. By limiting sources of contamination, the accessory supports longer intervals between maintenance and calibration, which translates into fewer interruptions on the production floor. The result is a measurable improvement in operational uptime and consistency for precision weighing tasks. Fit and handling tailored to busy workstations Designed specifically for the KERN series of weighing instruments, the cover offers direct compatibility with EOC, IOC, BID and UID platforms. The set format provides spares for multiple stations or for immediate replacement after cleaning, while the lightweight construction ensures simple removal and refitting during daily use. Compatibility reduces sourcing complexity and helps maintain workflow efficiency across several weighing points. Practical procurement and workshop-ready convenience Supplied as a compact five-piece set, the accessory meets the needs of workshops and laboratories that prioritise continuity and readiness. Delivery from Metav’s Emmerich hub benefits from experienced logistics and a quality filter for the European market, ensuring dependable supply. For buyers seeking a straightforward protective solution, this accessory integrates into existing processes without requiring alterations to equipment or workflow. For procurement or technical advice from Metav Werkzeuge — request the KERN EOC-A01S05 protective cover set directly via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: EOC-A01S05 Manufacturer: KERN GTIN: 4045761197206 Country of origin: CN Tariff number: 39269097 Facts Weight: 0.01 kg Contents: 5 pieces Special features Compatible with EOC, IOC, BID and UID scales Category: Scales › Accessories SKU: EOC-A01S05 FAQ Is the cover suitable for all EOC models? The KERN EOC-A01S05 protective cover is specified for compatibility with EOC, IOC, BID and UID series scales and fits the intended models in those ranges. What is included in the delivery? Delivery comprises a set of five protective covers as stated in the product data and packaging information. Will the cover affect weighing accuracy during measurement? The cover is intended for protection when the scale is not actively weighing; removing the cover during measurement prevents any influence on weighing results. How lightweight is the accessory for handling and storage? Each set has an overall weight of approximately 0.01 kg, enabling effortless handling and compact storage between uses. Manufacturer: KERN — Address: not specified — Contact: not specified
5-Pack Protective Cover for FCF.3K-4 Weighing Unit, Keyboard and Housing Protection - KERN
Take advantage of robust dust and splash protection paired with simple replacement logistics to maintain uninterrupted weighing processes; the Protective Cover FCF-A01S05 combines practical compatibility with rapid availability from Metav Werkzeuge — order directly via Metav Werkzeuge or request advice from the consultants. Protective Cover FCF-A01S05 — Scale accessory for KERN FCF/FCE/FCB series The Protective Cover FCF-A01S05 is a scale accessory that protects keyboards and housings on KERN weighing equipment, designed for workshop and industrial environments. Protects keyboard and housing Compatible with FCF, FCE, FCB series Supplied as a set of 5 Reduce downtime with reliable protective coverage The protective cover provides consistent dust and splash protection for sensitive scale components, reducing the frequency of service interventions and prolonging the life of the instrument. By preventing particulate ingress over the keyboard and instrument housing, the accessory supports uninterrupted measurement accuracy and less frequent cleaning cycles. For production environments where traceability and repeatability matter, such passive protection contributes directly to operational efficiency and predictable maintenance planning. Fit-and-forget compatibility to speed up replacement Designed to match the contours of KERN’s FCF, FCE and FCB families, the cover is a ready-made accessory that simplifies spare-part logistics. Supplied as a 5-piece set, it enables scheduled rotation of covers so that clean, undamaged protection is always at hand, which minimises unplanned interruptions. The straightforward design keeps installation time to a minimum and avoids complex adjustments, supporting quick changeovers in busy workshop routines. Practical handling that supports workshop workflows Weighing little more than a few hundred grams, the set is convenient to store and simple to deploy when a cover requires replacement. The lightweight construction eases handling during frequent changeovers and reduces strain when fitting small instruments. As an accessory classified within scales spare parts, the covers integrate seamlessly into existing inventories and spare-part cycles without requiring additional tooling or training. Measurable benefits for process reliability By shielding keyboards and housings from contaminants, the accessory helps maintain calibration stability and reduces the likelihood of sensor or electronics contamination. This translates into fewer service calls and steadier throughput for repetitive weighing tasks. The solution is cost-effective when considered as part of a comprehensive uptime strategy: small, regular investments in protection yield measurable reductions in downtime and maintenance effort. Choose original KERN protective covers from Metav Werkzeuge to safeguard weighing equipment and keep processes running smoothly — contact Metav Werkzeuge in Emmerich for ordering and expert advice via info@metav-werkzeuge.com or telephone +49 2822 7131930. Technical data Article number: FCF-A01S05 Manufacturer: KERN GTIN: 4045761187153 Origin: CN Tariff code: 39269097 Core specifications Weight: 0.4 kg Pack content: 5 pieces ECLASS: 24322502 Compatibility & features Fits series FCF, FCE, FCB Protects keyboard and housing Product group: Scales accessories Category: Accessory FAQ Is this cover compatible with KERN desktop and bench scales? The cover is designed for KERN models in the FCF, FCE and FCB series and provides protection over keyboard and housing for those instrument types. How many covers are included with one order? Each delivery contains a set of five covers, supplied as a 5-piece set to allow for scheduled replacement and storage rotation. Will the cover affect weighing accuracy or calibration? The cover shields external components and does not interfere with weighing mechanics; regular calibration procedures for the instrument remain unchanged. Can the protective cover be cleaned and reused? The covers are intended for repeated use where practical; cleaning between uses extends service life and maintains hygiene around the keyboard and housing. Is this accessory suitable for harsh industrial environments? The cover offers effective protection against dust and splashes, reducing contamination risk for instruments used in demanding workshop settings Manufacturer: KERN — Manufacturer (origin: China); Dealer and contact: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
5-Pack Protective Cover for WTB Keyboards and Housings, Accessory - KERN
A practical choice for workshop hygiene and device protection: the cover fits over the keyboard and housing of WTB scales, offers quick replacement cycles and comes as a pack of 5 for immediate availability. Lightweight at 0.03 kg, the accessory reduces contamination risk and supports continuous operation. Order the protective cover directly via Metav Werkzeuge or ask our consultants if needed. Protective cover for WTB (RFB-A01S05) — KERN, pack of 5, keyboard and housing protection A protective cover for WTB scales that shields the keyboard and housing from dust and contamination while preserving instrument readability Designed for WTB keyboard and housing protection Pack of 5 protective covers Lightweight at 0.03 kg per unit Accessory for scale maintenance and hygiene Keep controls clean and production uninterrupted The slim protective hood offers straightforward protection for the keyboard and housing of laboratory and industrial scales, reducing the frequency of cleaning interventions. By covering sensitive surfaces, the accessory prevents particulate ingress and potential surface soiling that can hinder operation. Lightweight handling at 0.03 kg supports quick replacement during shift changes and minimises interruption to measurement tasks, helping to sustain reliable throughput and predictable workflows. Practical hygiene solution for regulated environments Supplied as a pack of 5, the accessory supports routine swap-out schedules so that cleanliness standards are maintained without delay. This approach delivers a cost-effective method to reduce cross-contamination in workshops, test stations and production benches. The simple design ensures compatibility with standard instrument housings, providing a ready-to-use measure that complements cleaning protocols and strengthens workplace safety practices. Seamless integration with scale equipment and service routines As an accessory for the WTB family, the hood is intended to integrate with existing workflows without additional tooling or installation steps. Its function-focused form helps protect display areas and input surfaces while remaining unobtrusive during operation. For procurement and stock planning, the pack format ensures immediate availability for service kits and spare-part inventories, supporting dependable device uptime across multiple workstations. Secure KERN protective covers for WTB scales from Metav Werkzeuge in Emmerich — for reliable keyboard and housing protection contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RFB-A01S05 Manufacturer: KERN GTIN: 4045761184565 Country of origin: CN Facts Weight: 0.03 kg ECLASS: 24322502 HS code: 39269097 Special features For WTB keyboard and housing protection Pack contents: 5 protective covers Product group: Work protection hoods (scales accessory) FAQ Is this cover compatible with all WTB scale models? The protective cover for WTB (RFB-A01S05) is designed for use with WTB series housings and keyboards; compatibility should be confirmed against the specific instrument dimensions. How many covers are supplied per SKU RFB-A01S05? The KERN RFB-A01S05 is delivered as a pack of 5 protective covers to support routine replacement. Can the covers be cleaned and reused? These covers are intended as quick-replacement protection; reuse depends on the contamination level and internal hygiene procedures for the instruments. What does the lightweight specification mean for handling and storage? At 0.03 kg per unit, the covers are easy to handle and store, enabling fast swaps during operational shifts and minimal storage footprint. KERN — Origin: CN
5-Pack Protective Dust Cover for EWJ Precision Scale, Compatible With KERN - KERN
Take advantage of a tailored protection solution that combines simple handling, compatibility with KERN precision scales and a practical 5-piece set for immediate replacement. Improve instrument uptime and limit contamination-related errors — order the protective cover directly via Metav Werkzeuge or ask our consultants if needed. Protective cover EWJ-A04S05 — Protective cover for precision scale, compatible with KERN The Protective cover EWJ-A04S05 is designed to shield sensitive weighing instruments from dust and contamination, suitable for laboratory benches and workshop quality-control stations. Protective cover for KERN EWJ precision scale Supplied as 5-piece set Lightweight at approx. 0.02 kg each Reliable protection that preserves measurement quality A durable protective cover reduces the risk of dirt, spills and particulate ingress that can affect load cells and delicate weighing electronics. By preventing contamination, the cover helps to maintain repeatable readings and reduces the frequency of calibration or service interventions. The specified compatibility with KERN EWJ-series devices ensures a precise fit, which is essential for preserving the factory-set tolerances of a precision scale and avoiding measurement drift. A practical set to keep processes running Supplying the cover as a 5-piece set supports uninterrupted workflows: one cover can remain in use while spares are immediately available for replacement after cleaning or accidental damage. For industrial and workshop environments where sampling and frequent handling occur, having ready spares reduces downtime and simplifies inventory management. This approach targets efficiency and cost-effectiveness by lowering the likelihood of production halts due to unprotected instruments. Lightweight handling that improves daily workflow At approximately 0.02 kg per cover, the hood is easy to fit and remove, making routine maintenance and cleaning straightforward even in busy metrology stations. The compact design supports space-efficient storage on a service trolley or in a calibration kit. Easy handling translates into faster changeover times during shift changes and a lower labour burden for routine housekeeping around precision equipment. Contact Metav Werkzeuge today to secure the KERN protective cover EWJ-A04S05 set — our Emmerich-based team will advise on compatibility and delivery to keep measurement operations reliable Technical data Article number: EWJ-A04S05 SKU: EWJ-A04S05 GTIN: 4045761185401 Manufacturer: KERN Country of origin: CN Data Weight: 0.02 kg Tariff code: 39269097 eClass: 24322502 Special features Compatibility: fits KERN EWJ precision scale Scope of delivery: 5 pieces Category: scale accessories Fast dispatch — available through Metav Werkzeuge FAQ Is this cover compatible with KERN EWJ scales? Yes. The protective cover EWJ-A04S05 is specified for use with KERN EWJ precision scales and provides a fitted shield for typical EWJ models. What does the set include? The delivery comprises a 5-piece set of protective covers (EWJ-A04S05), enabling immediate replacements and spares for workshop use. How does the cover protect the scale? The cover shields the weighing area from dust and light contamination, helping to preserve load-cell performance and reduce cleaning-related downtime for KERN precision scales. Is the cover suitable for laboratory and workshop environments? Yes. The lightweight design and exact fit make the cover appropriate for benches in laboratories and production quality-control stations where frequent handling occurs. Manufacturer: KERN — Made in China; For enquiries contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271
5-Pack Protective Dust Cover for PCD.250-3, For Weighing Indicator - KERN
Benefit from reliable dust protection and straightforward compatibility with the PCD.250-3 indicator; the lightweight design preserves handling and the practical set format simplifies stock keeping. Order the Protective cover for PCD.250-3 directly via Metav Werkzeuge or ask our consultants if needed. Protective cover for PCD.250-3 — KERN accessory for weighing indicators The Protective cover for PCD.250-3 provides dust and contaminant protection for weighing electronics, suited to workshop and industrial scales where reliable indicator performance is required. Protective cover for PCD.250-3 indicators KERN accessory for weighing equipment Delivered as a practical set Protect sensitive electronics and maintain consistent measurements The cover offers targeted dust protection for the indicator unit, helping to prevent particulate ingress that can affect display clarity and internal controls. In practice, fewer contamination-related interruptions mean less cleaning and reduced recalibration frequency, which supports a steady production rhythm. By limiting environmental exposure to the display and buttons, this accessory contributes to sustained measurement accuracy and lower long‑term maintenance effort for weighing systems. Simple compatibility and low handling effort for workshop use Designed specifically for the PCD.250-3 indicator, the hood ensures precise compatibility with the mounting and shape of the device; the fit reduces the risk of accidental displacement while accessing controls. The cover’s lightweight design keeps added mass minimal and makes handling straightforward during routine checks or when the indicator needs to be moved. The practical form factor means no special tools are required for fitting, so integration into daily workflows is immediate and transparent. Practical supply and dependable sourcing for uninterrupted operation Supplied as a convenient set, the cover streamlines replenishment for workshops and service departments that maintain several weighing stations. Sourcing via Metav Werkzeuge offers a reliable logistics channel and access to a broad range of complementary accessories, combining rapid dispatch from Emmerich with a wide product range. This procurement route supports predictable stock management and reduces the number of supplier interfaces, aiding continuous operation across production and inspection environments. For advice on suitability and to arrange supply of KERN accessories, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised assistance and ordering options Technical data SKU: PCD-A05S05 Manufacturer: KERN GTIN: 4045761185319 Origin: CN HS code: 39269097 Facts Article number: PCD Net weight: 0.02 kg Special features Compatible with PCD.250-3 indicators Delivered as set of 5 Product category: Scales accessories Rapid dispatch noted in product brief FAQ What is the Protective cover designed to protect? The protective hood shields the indicator’s display and controls from dust and light contamination, maintaining clear operation of the PCD.250-3 indicator. Is this KERN accessory compatible with other indicator models? Compatibility is specified for the PCD.250-3; similar housings are model-specific, so check dimensions before fitting other devices. How does the cover affect maintenance routines? By reducing dust ingress and surface soiling, the cover helps decrease cleaning frequency and supports stable measurement behaviour for the indicator. Does the set include multiple covers for workshop stocking? The product is supplied as a practical set, intended to simplify replacement planning and keep several stations protected. Metav Werkzeuge · Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930
5-Pack Protective Dust Hood for MPLS.420-3F Scales, Lightweight Splash Cover - KERN
Take advantage of the combination of lightweight protection, straightforward compatibility and easy replacement to keep weighing stations clean and operational; order the accessory directly via Metav Werkzeuge or ask the consultants for detailed advice. Protective Hood PLJ-A01S05 – scale accessory for MPLS.420-3F, by KERN A Protective Hood PLJ-A01S05 designed as an accessory for MPLS.420-3F scales, offering simple protection against dust and incidental splashes during routine weighing and handling. Protective hood for MPLS.420-3F scales Supplied as a five-piece set Extremely lightweight at 0.03 kg Extend the service life of weighing equipment with minimal effort The protective hood acts as a practical barrier that reduces contamination of the weighing area and associated components, helping to preserve calibration intervals and reduce cleaning effort. As an accessory specifically matched to the MPLS.420-3F series, the cover provides straightforward compatibility with the relevant enclosure geometry, enabling faster installation and removal. The lightweight construction contributes negligible bulk while offering a visible improvement in day‑to‑day cleanliness, which supports consistent measurement quality and lowers indirect maintenance costs. Keep workflows efficient with ready replacements Supplied as a set, the covers allow for quick rotation and replacement during scheduled cleaning or when wear is observed, minimising downtime in production and laboratory routines. The option to replace a single item from the set ensures continuity of operation while spare pieces are sanitised or stored. This practical supply approach supports continuous throughput in busy environments, where simple consumables must not interrupt process flow or shift productivity. Simple storage and handling for busy environments The compact form and low weight make the covers easy to store near the weighing station without occupying valuable bench space. Their manageable size reduces handling time during changeovers and keeps ancillary tasks brief, so focus remains on measurement tasks rather than on managing protective equipment. Clear labelling and a consistent accessory format mean stores and toolrooms can keep inventory under control and minimise procurement overhead. OEM alignment and traceable identification As an accessory from KERN, the hood is designed to match the intended application and mechanical interfaces of the MPLS.420-3F series, ensuring a predictable fit and function. Traceable identification via the SKU supports stock control and reorder accuracy, while origin information contributes to supply‑chain transparency. This alignment reduces the risk of ill-fitting substitutes and supports a reliable maintenance plan that safeguards measurement accuracy over time. For original KERN accessories such as the PLJ-A01S05 protective hood and for ordering or technical advice, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Article number: PLJ SKU: PLJ-A01S05 GTIN: 4045761186972 Manufacturer: KERN Country of origin: IT Facts Weight: 0.03 kg eClass: 24322502 Tariff number: 39269097 Special features Compatibility: for MPLS.420-3F series Scope of delivery: five covers per set Category: Scales > Accessories FAQ What is the primary purpose of this hood? The protective hood is intended to reduce dust and incidental splashes on the weighing area, helping to maintain cleanliness and support consistent measurements for the MPLS.420-3F series. Is this an original KERN accessory? Yes, the item is a KERN accessory supplied under SKU PLJ-A01S05 and is specified for use with the MPLS.420-3F scales. Can the covers be replaced individually? Covers supplied in the set can be rotated and replaced individually to allow ongoing operation while others are being cleaned or put into storage. How does this accessory benefit routine maintenance? By reducing contamination, the hood contributes to longer intervals between detailed cleanings, which can lower indirect maintenance effort and help preserve calibration stability. Manufacturer: KERN; Address: –; Contact: –
5-Pack Protective Hood for GAB CPB CFS CCS Scales, Splash Cover - KERN
Take advantage of straightforward scale protection with a lightweight, compatible cover that reduces downtime and simplifies replacements; supplied as a five-piece set for immediate stock rotation. Order the protective hoods directly via Metav Werkzeuge or consult our advisors for application guidance. Protective Hood CFS-A02S05 — protective cover for KERN scales, compatible with GAB, CPB, CFS and CCS The Protective Hood CFS-A02S05 serves as a dedicated protective cover for scale modules from the GAB, CPB, CFS and CCS series, intended for workshop and laboratory weighing environments. Compatible with GAB, CPB, CFS and CCS scales Supplied as a five-piece set Lightweight: 0.04 kg each Rapid replacement reduces measurement downtime Preserve weighing accuracy with reliable protection The primary role of this cover is to provide consistent protection for weighing equipment, helping to maintain measurement integrity in routine operations. By shielding sensitive components from dust, light contamination and incidental contact, the hood contributes to stable readings and reduces the frequency of cleaning or sensor recalibration. The design emphasises unobtrusive coverage so that workflows remain uninterrupted while the instrument stays protected. Minimise downtime through easy replacement and storage Supplied as a compact set, the covers enable quick swaps during shift changes or maintenance intervals. The lightweight construction (0.04 kg per unit) means little storage impact and effortless handling when replacing worn or soiled covers. For busy facilities that require continuous operation, keeping a ready set on hand reduces stoppages and supports predictable production cycles, delivering a practical benefit for workshop managers and quality teams. Ensure fit and stocking efficiency for multiple scale series Compatibility across the GAB, CPB, CFS and CCS series simplifies procurement and inventory control: a single SKU covers several instrument types. This cross-series fit supports centralised stocking strategies and lowers the number of product variants to manage. The hood set is therefore a convenient accessory for service departments and procurement teams aiming to streamline spare-part lists while ensuring ready availability of protective equipment. Choose KERN protective hoods from Metav Werkzeuge for dependable scale protection and simplified spare-part management — contact Metav Werkzeuge in Emmerich for tailored advice or to place your order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CFS SKU: CFS-A02S05 Manufacturer: KERN GTIN: 4045761184510 Weight: 0.04 kg Country of origin: CN ECLASS: 24322502 Tariff number: 39269097 Facts Product group: Work protection hoods for scales Scope of delivery: 5 pieces Category path: Waagen › Zubehör Special features Compatible with GAB, CPB, CFS and CCS series Lightweight design for quick handling Intended for workshop and laboratory use FAQ What scale models are compatible with this protective hood? The protective hood CFS-A02S05 is designed to fit scales from the GAB, CPB, CFS and CCS series and provides standard protective coverage for these models. How is the product supplied and what is included? Delivery includes a five-piece set of protective hoods; the CFS-A02S05 set allows immediate replacement cycles and spare-part stocking. Does the hood affect measurement accuracy when installed? When correctly positioned, the hood preserves the scale’s intended measurement function; the CFS-A02S05 is designed to protect without interfering with weighing operations. KERN · Country of origin: CN · No direct manufacturer contact provided
5-Pack Protective Hood for MPES.620-3M, Fits 140x120mm & 200x200mm Weighing Plats - KERN
Take advantage of reliable dust and splash protection, proven compatibility with KERN PES/PEJ scales and a compact, lightweight design for efficient workshop routines; order the protective covers directly via Metav Werkzeuge or consult the Metav team for procurement support. KERN PES-A04S05 Protective Cover for PES/PEJ Scales — Compatible with 140 x 120 mm & 200 x 200 mm Pans The PES-A04S05 protective cover is a fitted accessory for precision weighing equipment, designed to shield scale platforms from dust and light contamination while remaining unobtrusive in daily operation Pack of five protective covers Compatible with KERN PES/PEJ scales Fits 140 x 120 mm and 200 x 200 mm pans Lightweight, space-saving storage Not suitable for PES 31000-1M Preserve measurement reliability with targeted protection A compact protective cover such as this one prevents particulate ingress and surface contamination that can lead to drifting results and repeated cleaning cycles. The small weight (0.02 kg) and tailored shape allow the cover to sit securely over standard pans without affecting tare adjustments, helping to keep precision measurement workflows steady and reproducible. For workshops that run frequent checks, the covered platform reduces maintenance interruptions and supports consistent process control. Minimise downtime through model-specific compatibility Delivered as an accessory for KERN instruments, the cover is engineered for direct compatibility with PES/PEJ families and specific models such as MPES.620-3M, matching common weighing pan formats (140 x 120 mm and 200 x 200 mm). Correct matching simplifies fitment and replacement, so protective measures are implemented quickly and without modification. Note that the design is not suitable for PES 31000-1M, ensuring clarity when selecting the correct accessory for a given scale. Practical handling that suits workshop routines Supplied as a five-piece set, the covers enable scheduled replacement and spare-part stocking without excessive storage demand. The slim profile supports tidy stacking and fast exchange during shift changes, contributing to smoother operations and reduced cleaning labour. Manufactured origin in Japan under the KERN brand signals consistent production standards, while the minimal footprint of each hood preserves bench space in crowded work environments. Contact Metav Werkzeuge for procurement of KERN PES-A04S05 covers and tailored advice from Emmerich-based specialists Technical data Article number: PES-A04S05 Manufacturer: KERN GTIN: 4045761186903 Country of origin: JP Tariff number: 39269097 Weight: 0.02 kg Core data Suitable pan sizes: 140 x 120 mm; 200 x 200 mm Suitable for: MPES.620-3M Not suitable for: PES 31000-1M Special features Pack of five covers Accessory for PES/PEJ scales Lightweight protective hood FAQ Is this cover compatible with my KERN scale model? Compatibility is indicated by pan size and model family; the PES-A04S05 fits KERN PES/PEJ models with 140 x 120 mm or 200 x 200 mm pans and specific units such as MPES.620-3M. Does the cover protect against dust and minor spills? The protective hood shields the weighing pan from dust and light contamination, reducing the need for frequent cleaning and helping to maintain reliable weighing results. Can the PES-A04S05 be used on a PES 31000-1M? No, the PES-A04S05 is not suitable for PES 31000-1M; consult the model compatibility list to select the correct cover. How is the product supplied and under which SKU? The item is supplied as a set of five covers; identification is by SKU PES-A04S05, manufactured by KERN. Where is the product manufactured? The protective covers are manufactured in Japan and supplied under the KERN brand. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com